<p> Pre-Trip Inspection Class A</p><p>Truck will have 98 items to be checked on a truck with 2 axles and 2 trailer axels. You must tell the tester what you are checking each part for. You will have to check each axle as outlined. There is no order or sequence to the test. If you miss a part, you can go back and identify it. You can identify a part by a different name, as long as the tester knows what you are referring to. You are getting graded that you know what to check each part for, not that you know the names of the parts. </p><p>This order starts in the engine compartment and inspects only the axles on the driver’s side of the truck. The test requires you to only inspect the driver side unless the item is only on the passenger side (parts in engine compartment, exhaust).</p><p>Engine Compartment 1. Oil Level-make sure level is between add and full 2. Coolant Level-level is suffient for operation 3. Power Steering-level is between add and full, must say that it is gravity powered 4. Water Pump-not leaking, belt not cracked or frayed, tension is between ½” and ¾” 5. Alternator-belt, not cracked or frayed, tension is between ½” and ¾” 6. Air Compressor-secure, no must say that it is gear drive 7. Leaks/Hoses-check engine for excessive leaks and hoses for splits, cuts, tight clamps Front Truck Axle 8. Steering Box-secure, hoses do not leak 9. Steering Linkage-not bent, bolts tight, no cracks 10. Springs-none broken, all in alignment 11. U-bolts-nuts tight, not broke or rusted 12. Spring Mounts-check front and rear mount for cracks and tight bolts 13. Shock Absorber-straight, bolts tight, not leaking 14. Brake Hose-not kinked, cut or swollen 15. Brake Chamber-bolts tight, not cracked or rusted 16. Slack Adjuster- pins in place, no more than 1”adjustment 17. Brake Drum-no cracks, no fluid, brake linings (shoes) are sufficient 18. Tire-4/32” tread depth, no cuts or bubbles on side walls, check pressure 19. Rim-no cracks, no rust 20. Lug Nuts-none missing, not loose, no signs of rust 21. Wheel Seal-not leaking, no loose or missing bolts Side of Cab 22. Door-door hinges are good, handle works, mirror is securely mounded 23. Fuel Tank-straps are secure, cap is on tight, must check tank for leaking 24. Exhaust System-no signs of soot (leaking), securely mounded, all clamps are tight Rear of Cab 25. Frame-no cracks, bolts are all tight, must check cross members also 26. Air & Electric Lines-not pinched, cracked, or rubbing, securely hanging 27. Air & Electric Connections-rubber grommets are not broke, elect. fitting is secure 28. Drive Shaft-straight, no cracks, bolts are tight 29. Cat Walk-bolts are tight, not slippery, no debris Fifth Wheel 30. Bolts-bolts that bolt 5th wheel to frame are tight, none are missing 31. Platform-(raised area) no cracks or broken welds 32. Release Arm-in locked position, releases freely 33. Gap-must check there is no gap between 5th wheel and trailer apron 34. Skid Plate-incline so trailer apron can move to 5th wheel plate, not broke or dented 35. Jaws-look in back of 5th wheel to make sure that jaws are locked around king pin Rear Truck Axle 36. Springs-none broken, all in alignment 37. U-bolts-nuts tight, not broke or rusted 38. Spring Mounts-check front and rear mount for cracks and tight bolts 39. Brake Hose-not kinked, cut or swollen 40. Brake Chamber-bolts tight, not cracked or rusted 41. Slack Adjuster- pins in place, no more than 1”adjustment 42. Brake Drum-no cracks, no fluid, brake linings (shoes) are sufficient 43. Tire-2/32” tread depth, no cuts or bubbles on side walls, check pressure 44. Rim-no cracks, no rust 45. Rim-no cracks, no rust 46. Lug Nuts-none missing, not loose, no signs of rust 47. Wheel Seal-not leaking, no loose or missing bolts 48. Spacer-must check there is no debris between tires, tires are evenly spaced Trailer 49. Frame-no cracks or broken welds, cross members are straight 50. Landing Gear-raised, no broken welds, bolts are tight, crank handle is secured 51. Header Board-trailer front has no cracks, holes, and will secure load in sudden stop Front Trailer Axle 52. Springs-none broken, all in alignment 53. U-bolts-nuts tight, not broke or rusted 54. Spring Mounts-check front and rear mount for cracks and tight bolts 55. Brake Hose-not kinked, cut or swollen 56. Brake Chamber-bolts tight, not cracked or rusted 57. Slack Adjuster- pins in place, no more than 1”adjustment 58. Brake Drum-no cracks, no fluid, brake linings (shoes) are sufficient 59. Tire-2/32” tread depth, no cuts or bubbles on side walls, check pressure 60. Rim-no cracks, no rust 61. Lug Nuts-none missing, not loose, no signs of rust 62. Wheel Seal-not leaking, no loose or missing bolts 63. Spacer-no cracks, must check there is no debris between tires, tires are evenly spaced Rear Trailer Axle 64. Springs-none broken, all in alignment 65. U-bolts-nuts tight, not broke or rusted 66. Spring Mounts-check front and rear mount for cracks and tight bolts 67. Brake Hose-not kinked, cut or swollen 68. Brake Chamber-bolts tight, not cracked or rusted 69. Slack Adjuster- pins in place, no more than 1”adjustment 70. Brake Drum-no cracks, no fluid, brake linings (shoes) are sufficient 71. Tire-2/32” tread depth, no cuts or bubbles on side walls, check pressure 72. Rim-no cracks, no rust 73. Lug Nuts-none missing, not loose, no signs of rust 74. Wheel Seal-not leaking, no loose or missing bolts 75. Spacer-no cracks, must check there is no debris between tires, tires are evenly spaced Rear of Trailer 76. Ramps-secure, up all the way, no cracks 77. Splash Guards-mud flaps are not tore, bolted securely Cab Compartment/Engine Start 78. Clutch/Gearshift-push in clutch & make sure shifter is in neutral before starting engine 79. Temperature-check temperature gauge for operation and in safe range 80. Voltmeter-check voltmeter for operation and in safe range 81. Oil Pressure-check oil pressure gauge for operation and in safe range 82. Air Gauge-working properly, pressure builds to 120 psi 83. Steering Play-check steering play for no more than 10 degrees or 2” 84. Parking Brake-check parking brake by applying and putting truck in low gear and try to move (lug engine), must check both tractor and trailer parking brake 85. Service Brake-pull forward at 5 mph and stop with foot brake, no pull from stop 86. Windshield/Mirror-check windshield for cracks, no stickers, mirrors are adjusted & clean 87. Wipers-operate properly, rubber is not cracked 88. Lighting Indicators-on dash, check left & right turn arrow, 4 way flashers and high/low beam indicator 89. Horn-blow air and electric horn 90. Heater/Defroster-turn on heater and defroster to make sure they work properly 91. Safety/Emergence Equipment- must have fire extinguisher, 3 triangles and spare fuses 92. Safety Belt-must work properly, not cut, securely mounded 93. Air Brake Check-PASS FAIL ITEM ON TEST 1. build air pressure to 120 2. turn off engine then turn key to on position 3. release both parking brakes, (truck & trailer) 4. apply foot brake & keep pressure applied for 1 minute-cannot loose more than 4 pounds in 1 minute 5. say that low air buzzer will come on at 60 PSI, pump foot brake (fan) so buzzer will sound 6. say that parking brake will pop out at approximately 30 PSI, pump foot brake (fan) so buttons pop Lights 94. Lights (front of vehicle)-head light, must turn on, clean, not broken, operating properly 95. Lights (rear of tractor)-put on emerg. flashers, make sure working, red lenses, not broken 96. Lights (front side of trailer)-must turn on, working properly, amber lense, not broken 97. Lights (rear side of trailer)-must turn on, working properly, red lense, not broken 98. Lights (rear of trailer)-must turn on, working properly, red lenses, not broken</p>