<p>ALL SRS MODELS</p><p>Flexible Cable Drive</p><p>Tools Required: 8mm Wrench, Screwdriver</p><p>Parts Required: Echo Lube or a white lithium base grease</p><p>1. Loosen two gear box mounting screws (A) and remove location screw (B) - slide gear box from end of housing.</p><p>2. Wrap shop cloth around end of housing pull flex cable through it cleaning old grease from cable.</p><p>3. Inspect cable for damage and wear.</p><p>4. Coat flex cable with ECHO Lube or a white lithium base grease and push back into housing.</p><p>5. Install gear box</p><p>IMPORTANT: Flat side of washers (C) must be against drive shaft.</p><p>3. Align location hole in gear housing with drive shaft location hole (D).</p><p>4. Tighten location bolt (B) and gear housing bolts (A).</p>