1. Preliminary remarks 5. DESCRIPTION OF PRODUCT Different types of information in display area 7.You will hear a long beep,that means the measurement has finished,you Please do not remove the thermometer before hearing the long beep at can read the temperature value on the screen, as shown below. the end of measurement. Display screen Procedure Description (1) Side view (2) Frint view If the sensing head is found to be dirty after or during measurement or Starting Turn on this device by Pressing before putting the thermometer back into the box, use alcohol cotton to Please read these instructions for use carefully before first use as correct up O/I button.All information will be wipe it carefully please. temperature measurement depends only on the appropriate use of the shown for two seconds. Please try to take measurement in the same area; results will be device. These instructions describe the individual steps of temperature The last reading will different in different areas. measurement using Infrared Thermometer and contain important and SCAN automatically display on the 8.Intelligent analysis of body temperature. screen for two Because the temperature regulating function of baby is not perfect, do helpful hints for the reliable determination of the body temperature. Be Memory If the measured temperature is below 99.5℉ (37.5℃)，the measurement sure to keep these instructions for use for future reference. seconds.containing M not take measurement immediately after the baby go into the image,measurement mode result will display on screen with a long beep and green backlight. environment with large temperature difference, to avoid temperature image (human body) or object. If the measured temperature is higher than 99.5℉ (37.5℃)，the 2. Introduction O/I measurement deviation. measurement result will display on screen with 10 short beeps. The back Dear Customer, we are pleased that you have decided to purchase a Suggest using general type thermometers for measuring in the light display and the short beeps alert the patient that he/she has a clinical thermometer.Non-contact Infrared Thermometer is a quality Preparation This device has been prepared following cases: for measuring , image of℉ (℃) temperature above 37.5℃. product for measuring the human body temperature on the forehead, It is of 1) Measurement results are higher or lower than expected. ideally suited for measurements on children as from 6 months of age, but measurement will keep twinkling. Measurement of the object temperature 2) Newborn baby younger than 100 days. the thermometer can be used also on adults. Given correct application 1. Slide down the switch to enter object temperature measuring mode. the device ensures a fast and precise measurement of the body 3) Children under 3years old who have a defective immune system, 2. Press O/I button,all images on screen will display. temperature in a very comfortable manner. We wish you all the best for have very serious fever or no fever phenomenon. No Item Execution Description your health. status of mode 3. The last reading and M image will automatically display for two seconds. Indications for Use: Reading will be displayed on Infrared Thermometer is intended to detect body temperature from Display Display measurement readings the LCD screen,red backing for 4. The thermometer entered the ready state: 1 8. USING THE THERMOMETER screen And other corresponding symbols Finish of measurement value≥fever forehead in the population including infant (above 6 months), child, measurement point,green backlight for a. A short beep. adolescent, and adult. The thermometer can automatically memories 30 measurement values. Off status Press once to enter memory mode measurement value＜fever b. Image of ℉ (℃) and reference position will twinkle on the screen. SCAN point. Please follow the following sequence to read memory value. 2 3. BENEFITS OF THE THERMOMETER button 1.In the turn-off state, press the ”SCAN” button about 3 sec, you can On status Press to take measurement Non-contact measurement in a few seconds enter the reading memory mode. The image ”M” will flash on the screen. High-tech innovative infrared sensor: to complete measurement safely 3 O/I button Press to turn on/off thermometer Around two seconds later, the and healthily in a few seconds. To enter the image of ℉ (℃)will twinkle,this next Battery device is ready for the next Body and Object temperature measurement Protect the battery measurement 4 cover measurement. You can choose to perform measurement of either body temperature or 2. Press the “SCAN” button again,”1”will appear and then the last Sensing object temperature by moving the slide switch. Infrared sensing for measurement 5 head measured value and “M”image will flash. Fever Prompt Selected body temperature Red backlight display and 10 short beeps to warm the patient that he/she 7. USING THE THERMOMETER 5. Aim the thermometer at the center of object no more than 5 cm away. If Measurement mode by sliding the there is water, dust or dirt on the object, please wipe clean in order to may have a fever. Switch switch upwards. 6 Slide switch Measurement How to Switch °C and °F? improve accuracy. Display 30 measurement readings mode Selected object temperature Press the SCAN button about 8sec when the machine in off status, When you enter the memory mode, you can read the last 30 measurement mode by sliding the switch downwards. then it will occur °C or °F , if this unit not what you want, please press measurement readings. the SCAN button again immediately . Automatically display memories Compents: This thermometer will display the last reading automatically for two Non-contact Thermometer Measurement of human body temperature FR850 Instructions for use of products seconds when starting the device. 1. Slide the switch upwards to enter body temperature measuring mode. 3.After that, press the “SCAN”button again,”2” will appear and then the penultimate measurement value and “M”image will flash. 2. Press O/I button, all images on screen will display. 6. Press the “SCAN”button for 2 seconds,while aiming at the center of the 3. IMPORTANT SAFETY INSTRUCTIONS object, release and the measurement started. 3. The last reading and M image will automatically display for two seconds. 7. You will hear a long beep, that means the measurement has finished, Never use the product for other purposes except its original use please 4. The thermometer will enter the ready state: you can read the temperature value on the screen, as shown below. comply with the general safety precautions when used for children. 2“AAA”Batteries Instruction Manual a.A short beep. This thermometer should never be immersed in water or other b.Image of ℉ (℃) and reference position will twinkle on the screen. liquid(not waterproof).For cleaning and storage please read carefully the instructions in section 8. 6. DISPLAY SCREEN AND IMAGE DESCRIPTION Please store the thermometer in a clean, dry environment ; avoid direct Description of all kinds of images in display area Attention: sunlight; storage temperature should be between -4 to131 /-20 to 1. Continuously pressing “SCAN” button ,30 measurement values 55℃. Please keep users and the thermometer in a stable room temperature will be displayed in order. Image Setting Description Please do not use the thermometer if its sensing head or body have for at least 30 minutes before use. been damaged,and do not attempt to repair it when damaged. Can perform measurement of body After continuous measurement, please wait at least two minutes to turn Body mode This non-contact thermometer is made up of high quality precision temperature on or off the thermometer again. part. Do not drop the instrument!Protect it from severe impact and 5. To start the measurement,aim the Can perform measurement of object Do not take a measurement immediately or a period of time after shock. Please do not twist its body and sensing head. Object mode temperature thermometer at the center of the Forehead nursing. no more than 5 cm away. If there is Properly dispose of batteries, keeping them from small children and Never use the thermometer in a high temperature environment. hair,sweat or dust on the forehead,please heat. Fahrenheit degree Measure by degree centigrade remove and wipe clean in order to improve Before or during measurement, do not drink ,eat, or move. If batteries are swallowed consult a doctor immediately. accuracy. Degree centigrade Please clean the scanning area and remove dust,hair or sweat before 6.Press the “SCAN”button for two seconds,release and the measurement using the thermometer. Press the measurement button”SCAN” a gain after reading the thirtieth Warning: Memory mode Display measurement value from Using the Non-contact Thermometer should not replace visiting a doctor. memory is started. Please remove water, dust or dirt on the object before measurement. measurement value, it will return to the most recent measurement value. 9.ERROR MESSAGE Please help protect the environment: Do not dispose of batteries in Any damage caused by improper handling shall not be covered by the household waste! designated collection points or municipal collection / warranty. Batteries and packaging are also excluded from the warranty. All according to the transmitter manufacturer recycling centers to dispose of waste batteries. other damage claims excluded. A warranty claim must be submitted within and d is the recommended separation Significance of Possible causes and distance in meters (m). The screen display This symbol on products and / or accompanying documents means the warranty period. Be sure to include: date of purchase, dealer stamp, display Debugging method Field strengths from fixed FR transmitters, and name and address of responsible dealer. that products must not be mixed with regular household waste.