PRELIMINARY PROGRAMME Technical Sessions, Tuesday 8th (1/51) Tuesday 8th, September Higashiyama, Kosuke Ida, Yutaka Shokaku, School of Natural Science and Technology, Kanazawa University, Kanazawa, B1-11 Minisymposium/ Hydrogen tribology for future Ishikawa, Japan energy I B1-125 Wear Characteristics of PTFE and PTFE Based 8:40-10:20, Room B-1 Composites in Gaseous Hydrogen: Yoshinori Sawae*, Session Chair: Shinya Sasaki, Tokyo University of Science, Department of Mechanical Engineering, Faculty of Engineering, Japan Kyushu University, Fukuoka, Japan; Daichi Yamamoto, Joichi Sugimura, Kyushu University, Japan Graduate School of Engineering, Kyushu University; Kazuhiro B1-111 Keynote Speech: New Challenges to Tribology Nakashima, Department of Mechanical Engineering, Faculty of in Hydrogen: Joichi Sugimura*, Department of Mechanical Engineering, Kyushu University; Yoshie Kurono, Hydrogen Engineering, Kyushu University, Fukuoka, Japan, Research Technology Research Center, Kyushu University; Shunichiro Doi, Center for Hydrogen Industrial Use and Storage, AIST Teruo Murakami, Department of Mechanical Engineering, B1-112 Cryogenic Tribology of High-Speed Bearings Faculty of Engineering, Kyushu University; Joichi Sugimura, and Shaft Seals in Liquid Hydrogen (Invited): Masataka Department of Mechanical Engineering, Faculty of Engineering, Nosaka*, Department of Mechanical Engineering, The Kyushu University, Research Center for Hydrogen Industrial Use University of Tokyo, Tokyo, Japan and Storage, Advanced Industrial Science and Technology B1-113 The Effects of Hydrogen on Microstructural Change and Surface Originated Flaking in Rolling B1-13 Minisymposium/ Diamond-Like Carbon for Contact Fatigue: Hiroki Yamada*, Hideyuki Uyama, Nobuaki tribology I Mitamura, Basic Technology Research Center, NSK Ltd., 15:00-16:40, Room B-1 Kanagawa, Japan Session Chair: Ali Erdemir, Argonne National Laboratory, USA B1-114 Fretting Wear Tests of Steels in Hydrogen Gas Noritsugu Umehara, Nagoya University, Japan Environment: Naoshi Izumi*, Department of Mechanical B1-131 Green Tribology: Lubricant-Compliant Engineering, Kyushu University, Fukuoka, Japan; Nichiro Superhard DLC Coatings (Invited): Jean Michel Martin*, Mimuro, National Institute of Advanced Industrial Science and Maria Isabel De Barros Bouchet, Ecole Centrale de Lyon, LTDS, Technology; Takehiro Morita, Department of Mechanical Ecully, France; Takumaru Sagawa, NISSAN MOTOR CO, LTD, Engineering, Kyushu University; Joichi Sugimura, Department of Yokohama, Japan Mechanical Engineering, Kyushu University, National Institute B1-132 Super Hard DLC Coating Technology (Invited): of Advanced Industrial Science and Technology Hirofumi Takikawa*, Department of Electric and Electronic B1-115 Friction and Wear of Ferrous Materials in Engineering, Toyohashi University of Technology, Toyohashi, Hydrogen Gas Environment: Kanao Fukuda*, Hydrogen Aichi, Japan Technology Research Center, Kyushu University, Japan; Joichi B1-133 Industrial Ta-C Coating Technology by Sugimura, Department of Mechanical Engineering, Kyushu Laser-Assisted PVD (Invited): Volker Weihnacht, University , Research Center for Hydrogen Industrial Use and Hans-Joachim Scheibe*, Carl-Friedrich Meyer, Michael Storage, AIST Leonhardt, Andreas Leson, Fraunhofer Institute Material and Beam Technology (IWS), Dresden, Germany B1-12 Minisymposium/ Hydrogen tribology for future B1-134 Advanced Technology for Applying DLC energy II Coating (Invited): Makoto Kano*, Takahiro Horiuchi, Kentaro 10:50-12:30, Room B-1 Yoshida, Masahiro Mitsuhashi, Masao Kumagai, Mechanical Session Chair: Shinya Sasaki, Tokyo University of Science, and Material Engineering Division, Kanagawa Industrial Japan Technology Center, Ebina, Kanagawa, Japan Joichi Sugimura, Kyushu University, Japan B1-121 Keynote Speech: On the Intrinsic and Extrinsic B1-14 Minisymposium/ Diamond-Like Carbon for Hydrogen Lubrication Mechanisms of Various Carbon tribology II Films: An Imaging TOF-SIMS Study : Ali Erdemir*, Osman 17:10-18:50, Room B-1 L. Eryilmaz, Argonne National Laboratory, Energy Systems Session Chair: Makoto Kano, Kanagawa Industrial Technology Division, Argonne, IL - USA Center, Japan B1-122 Tribological Behaviour of Solid Lubricants in Jean Michel Martin, Ecole Centrale de Lyon, Hydrogen Environment (Invited): Thomas Gradt*, France Géraldine Theiler, BAM Federal Institute for Materials Research B1-141 Fundamental Tribological Mechanisms of and Testing, Division VI.2 Tribology and Wear Protection, Hydrogen-Free and Highly Hydrogenated DLC Films: Berlin, Germany An Imaging TOF-SIMS Study (Invited): Osman L. B1-123 Evaluation of Tribo-Coatings in Hydrogen Eryilmaz*, Ali Erdemir, Argonne National Laboratory, Energy Atmosphere: Hiroki Mano*, Takashi Murakami, Tribology Systems Division, Argonne-IL, USA Research Group, Advanced Manufacturing Research Institute, B1-142 Superior Lubrication of Cnx Coating in Nitrogen National Institute of Advanced Industrial Science and Gas (Invited): Noritsugu Umehara*, Dept. of Mechanical Technology (AIST), Tsukuba-shi, Ibaraaki, Japan, Hydrogen Science and Engineering, Graduate School of Engineering, Tribology Team, Research Center for Hydrogen Industrial Use Nagoya University, Nagoya, Aichi, Japan and Storage, AIST; Masayuki Hata, Department of Mechanical B1-143 Role of Adsorption and Tribophysical Engineering, Faculty of Engineering, Tokyo University of Parameters in Lubrication of DLC (Invited): Mitjan Kalin*, Science; Shinya Sasaki, Hydrogen Tribology Team, Research Igor Velkavrh, Jože Vižintin, Centre for tribology and technical Center for Hydrogen Industrial Use and Storage, AIST, diagnostics, University of Ljubljana, Ljubljana, Slovenia Department of Mechanical Engineering, Faculty of Engineering, B1-144 Diamond-like Carbon Coatings for Tribological Tokyo University of Science; Joichi Sugimura, Hydrogen Applications on Automotive Components (Invited): Roel Tribology Team, Research Center for Hydrogen Industrial Use Tietema*, Dave Doerwald, Ruud Jacobs, Thomas Krug, Hauzer and Storage, AIST, Department of Mechanical Engineering, Techno Coating BV, Venlo, The Netherlands Faculty of Engineering, Kyushu University B1-124 Friction and Wear of Rubber and PTFE in B2-11 Minisymposium/ Additives technology of Hydrogen Atmosphere: Tomoaki Iwai*, Tomoyuki lubricants for the next generation I －34－ Technical Sessions, Tuesday 8th (2/51) 8:40-10:20, Room B-2 Shingo Maruyama*, Matsumura Oil Research Corp. Session Chair: Akihito Suzuki, Tokyo Institute of Technology, (MORESCO), Kobe, Hyogo, Japan Japan B2-133 Strength and Weaknesses of Silicones for Use Toru Watanabe, Ciba Japan K.K., Japan as Synthetic Lubricant: Manfred Jungk*, Dow Corning B2-111 Keynote Speech: Tribochemistry of Lubricant GmbH, Wiesbaden, Germany Additives on Next-Generation Surface Coatings: Ardian B2-134 New Oil Soluble Polyalkylene Glycols for Morina*, Tabassumul Haque, Anne Neville, Institute of Energy Saving Lubricant Applications: Stephen Engineering Thermofluids, Surfaces and Interfaces, School of Merryweather, Daniel Zweifel*, Dow Europe GmbH, Horgen, Mechanical Engineering, University of Leeds, UK Switzerland B2-112 Additives for Improving the Fuel Economy of B2-135 Environment and Energy Savings by Use of Diesel Engine Systems (Invited): Kenji Yamamoto*, Synthetic Esters: Keiji Hirao*, Munehiro Yamada, Takeshi Kazuhiro Umehara, Akihiro Kotaka, Lubricants Department, Kajiki, Naoya Maekawa, Oleo & Speciality Chemicals Research Functional Chemicals Development Laboratory, ADEKA Laboratory, NOF Corporation, Amagasaki, Japan Corporation, Tokyo, Japan B2-136 Advanced PAO Based Industrial Lubricants for B2-113 The Investigation of Improvement Effects on Improved Energy Efficiency: Thomas G. Dietz*, Friction Properties of Mononuclear Modtcs Having ExxonMobil Lubricants and Petroleum Specialties Company, Azaheterocycles by Episulfidation (Invited): Chihiro Fairfax, Virginia, USA Bandoh, Takuya Hashimoto, Masatsugu Kajitani, Department of Materials and Life Science, Faculty of Science and Technology, B2-14 Minisymposium/ Energy savings by use of Sophia University, Tokyo, Japan; Eiji Nagatomi, Noriaki synthetic lubricants (Additives and Applications) Shinoda, Automotive Lubricants Group, Central R&D 17:10-18:50, Room B-2 Laboratory, Showa Shell Sekiyu K.K., Kanagawa, Japan; Toru Session Chair: Manfred Jungk, Dow Corning GmbH, Germany Sugiyama, Department of Materials and Life Science, Faculty of Hiroshi Kimura, Kyodo Yushi Co., Ltd., Japan Science and Technology, Sophia University, Tokyo, Japan; Izumi B2-141 Additive Technology for Synthetic Oils: Ichiro Takayanagi*, Hioyuki Tazaki, Automotive Lubricants Group, Minami*, Department of Chemical Engineering, Faculty of Central R&D Laboratory, Showa Shell Sekiyu K.K., Kanagawa, Engineering, Iwate University, Morioka, Iwate, Japan Japan B2-142 Contribution for Energy Savings by Novel Environmental Lubricants Containing Derivatives from B2-12 Minisymposium/ Additives technology of Natural Resources: Ryo Numazaki*, Shingo Nakayama, lubricants for the next generation II Toshihiro Inayama, Yukihiro Isogai, KYOWA HAKKO 10:50-12:30, Room B-2 CHEMICAL CO.,LTD, Yokkaichi-City, Mie, Japan; Ichiro Session Chair: Kedar Shanker Shrestha, Chevron Japan Ltd., Minami, Shigeyuki Mori, Department of Applied Chemistry, Japan Faculty of Engineering Iwate University, Morioka-City, Iwate, Hideo Tanaka, Evonik Degussa Japan Co., Ltd., Japan Japan B2-143 Near-dry Machining of Aluminum Alloys with B2-121 Vehicle Fuel Efficiency Testing of Automatic MQL System: