Shri Ramdeobaba College of Engineering & Management
Ramdeo Tekadi, GittiKhadan, Katol Road, Nagpur-440013
ACADEMIC SELF-EVALUATION REPORT Academic Session 2016-17
Prepared for Academic Session 2016-17 as per requirements of Para 9 of UGC Guidelines for Autonomous Colleges and RTMNU Ordinance/ Statutes related to Autonomous Colleges. The Report pertains to the sixth year of autonomous functioning.
Committee for Academic Self-Evaluation March 2018
D. R. Zanwar, Department of Industrial Engineering, Chairman Mrs. Renuka Nafdey, Department of Physics, Member P. R. Selokar, Department of Electronics & Communication Engineering, Member S. A. Patil, Department of Mechanical Engineering, Member H. M. Shukla, Department of Industrial Engineering, Member
ACADEMIC SELF-EVALUATION REPORT Academic Session 2016-2017
CONTENTS
Sr. No Section/Title Page 1.0 PREAMBLE 1 2.0 INTRODUCTION 2 3.0 GENERAL INFORMATION 3 3.1 Programs of Study in academic session 2016-17 3 3.2 Faculty strength (category-wise) 2016-17 3 3.3 Administrative, laboratory and library staff in academic session 2016-17 3 3.4 Student enrolment during the academic session 2016-17 4 4.0 ACADEMIC GOVERNANCE 5 4.1 Board of Management 5 4.2 Academic Council 6 4.3 Boards of Studies 7
5.0 PROGRAMME CURRICULA-HIGHLIGHTS OF CHANGES / DELETIONS / ADDITIONS OF 8 COURSES 5.1 New experiments & initiatives 8 5.2 Courses Discontinued/Modified from University Scheme 12 5.3 Number of new courses in the adopted scheme 15 5.4 New electives added and existing electives discontinued 16 5.5 Number and names of open electives 18 5.6 How open electives differ from diluted core 19 5.7 Local need/ industry based courses 22 5.8 Involvement/ consultation with alumni 22 6.0 R&D ACTIVITIES, PUBLICATIONS, CONFERENCES 23 6.1 Incentives for conducting research work in the College 23 6.2 Incentives to faculty for joining a PhD program 24 6.3 Faculty Contributions in Journals 24 6.4 Faculty presentations in conferences 31 7.0 EVALUATION/EXAMINATION PATTERN 41 8.0 RESULTS ANALYSIS 45
8.1 Percentage number of students in the stipulated CGPA ranges (Programme 45 wise & Year wise) for UG Engineering Percentage number of students in the stipulated CGPA ranges (Programme 8.2 46 wise & Year wise) for PG Engineering/ MBA/ MCA 8.3 Grade distribution at course level 48 8.4 Number of Ph.Ds produced during the academic session <2016-17> 60 8.5 Online feedback system 60
9.0 LIBRARY: ELECTRONIC SUBSCRIPTIONS 61 10.0 MAJOR EQUIPMENT IN LAB 62 11.0 CONCLUDING REMARKS 66 11.1 Adherence to the fulfillment of objectives of autonomy 66 11.2 Committee’s recommendations for future academic progress 68
1.0 PREAMBLE
Establishment Year: Shri Ramdeobaba College of Engineering and Management was established in 1984 as a private unaided engineering institution affiliated to Nagpur University, Nagpur and approved by the AICTE.
Permanent Affiliation: The College was granted permanent affiliation from the Nagpur University in 2009.
Principal : Dr. R. S. Pande.
Contact Information: Postal address: Shri Ramdeobaba College of Engineering and Management, Katol Road, Gittikhadan, Nagpur – 440013.
Official website: http://rknec.edu
Telephone: +917122582844, +917122543236
Grant of Academic Autonomy: The UGC conferred Academic Autonomy to the College for the six year period 2011-12 to 2016-17 vide its letter (No. F.22-1/2011(AC)), March 2011.
Accreditation: Accredited by NAAC in grade ‘A’ for five years. NBA accreditation for five years to Industrial Engineering Programme and two years for CSE, IT, EC, Civil, Electrical, Electronics & MBA.
1 | P a g e
2.0 INTRODUCTION
The University Grants Commission approved Status of Academic Autonomy for the College from the academic session 2011-12 for a period of six years. This Academic Self-Evaluation Report is prepared for the academic session 2016-17 as per requirements of Para 9 of UGC Guidelines for Autonomous Colleges for the XI Plan period and RTMNU Ordinance/Statutes related to Autonomous Colleges. It pertains to the Fifth Year of functioning of the College under autonomous status.
Academic autonomy is implemented in the College on a progressive basis since 2011-12. The first batch under fully autonomous status graduated in 2014-15. All academic programs, including all undergraduate programs, are fully governed by rules and regulations formed by the College amended up to the Academic Session (2016-17). This report is concerned with programs, rules and regulations applicable under autonomous status.
The purpose of the report is to determine in what ways and to what extent the College has moved in the direction of achieving objectives as laid down in Para 2 (a) of the UGC Guidelines as under:
The National Policy on Education (1986-92) formulated the following objectives for autonomous colleges. An autonomous college will have the freedom to: 1. determine and prescribe its own courses of study and syllabi, and restructure and redesign the courses to suit local needs; and 2. prescribe rules for admission in consonance with the reservation policy of the state government; 3. Evolve methods of assessment of students’ performance, the conduct of examinations and notification of results; 4. Use modern tools of educational technology to achieve higher standards and greater creativity; and 5. Promote healthy practices such as community service, extension activities, projects for the benefit of the society at large, neighborhood programs, etc. This report strives to ascertain the extent to which the objectives of the autonomy, as stated above, are achieved.
2 | P a g e
3.0 GENERAL INFORMATION:
3.1 Programs of Study in academic session 2016-17
Type S No Programme of Study Old/New* UG 1 B. E. Civil Engineering Old 2 B. E. Electrical Engineering Old 3 B. Electronics Engineering Old 4 B. E. Electronics and Communication Engineering Old 5 B. E. EDT Engineering Old 6 B. E. Computer Science and Engineering Old 7 B. E. Information Technology Old 8 B. E. Mechanical Engineering Old 9 B. E. Industrial Engineering Old PG 1 M. Tech. ( Structural Engineering) Old 2 M. Tech. ( Geotechnical Engineering) Old 3 M. Tech. ( VLSI) Old 4 M. Tech. ( Heat Power Engineering) Old 5 M. Tech. ( Industrial Engineering) Old 6 M. Tech. ( Computer Science and Engineering) Old 7 M. Tech. ( PEPS) Old 8 MBA Old 9 MCA Old Other 1 MBA (Integrated) Old
* Old: Existing from earlier sessions, New: Added in session under review
3.2 Faculty strength (category-wise) 2016-17:
Professor Associate Professor Assistant Professor Total 20 49 234 + 01 Lib 304 + 03 visiting = 307
3.3 Administrative, laboratory and library staff in academic session2016-17:
Administrative Laboratory Library Total 104 62 11 177
3 | P a g e
3.4 Student enrolment during the academic session 2016-17
Sanctioned Actual Semester-wise Enrollment 2016-17 Shift Programme of Study UG intake in FY I II III IV V VI VII VIII I B.E. Civil 60 65 65 77 77 81 81 83 83 I B.E. Industrial 60 62 62 78 78 80 80 81 81 I B.E. Electrical 60 64 64 76 76 73 73 79 79 I B.E. Electronics 120 127 127 159 159 144 144 142 142 I B.E. E.D.T 30 32 32 38 38 38 38 35 35 I B.E. Electronics& Comm. 60 64 64 77 77 74 74 75 75 I B.E. Information Tech. 60 63 63 77 77 77 77 74 74 I B.E. C.S.E 60 69 69 77 77 79 79 79 79 I B.E. Mechanical 60 65 65 78 78 73 73 80 80 II B.E. Civil II Shift 60 60 60 79 79 75 75 66 66 II B.E. Electronics II Shift 60 60 60 75 75 68 68 59 59 II B.E. Ele&Comm II Shift 60 60 60 72 72 76 76 69 69 II B.E. C.S.E II Shift 60 61 61 72 72 78 78 69 69
Sanctioned Programme of Study PG Actual Semester-wise Enrollment 2016-17 intake I II III IV V VI VII VIII M.Tech -Geotech.(PT) 15 5 5 15 15 6 -- M.Tech –Structures 18 18 18 18 18 M.Tech –Industrial 18 7 7 9 9 M.Tech – VLSI Design 24 24 24 21 21 M. Tech – CSE 24 23 23 18 18 M.Tech - PEPS 18 18 18 15 15 M.Tech - HPE 24 21 21 18 18 I MBA 60 60 60 54 54 I MCA 60 50 50 51 51 42 42 II MBA 60 60 60 56 56 II MCA 60 39 39 36 36 13 13 MAM 60 60 60 54 54 53 53 26 26
4 | P a g e
4.0 ACADEMIC GOVERNANCE
4.1 Board of Management:
The Board of Management conducted two meetings in 2016-2017. These were held on 2ndJune 2016 and 20th October 2017.
Important discussions on 2ndJune 2016:
1) Hon’ble Chairman asked Principal to brief the recommendations of IQAC. Principal submitted the discussions held with Padma Vibushan Dr. Anil Kakodkar. The initiatives with regard to Academics-Industry interaction, Research, Development, Placement were presented. Hon’ble Chairman asked Principal to ensure the implementation of the recommendations. 2) The Committed reviewed and approved the recommendations of the Academic Council. Hon’ble Chairman directed Principal to ensure the recommendations of Academic Council. 3) Dr (Mrs) Neeta Shah presented the changes in nomenclature of Dual Degree Course as per the letter dated 19.5.2016 received from Member Secretary, AICTE, New Delhi regarding the decision of AICTE. Hon’ble Chairman directed to write an elaborated Note/Letter along with the notification of AICTE and send it by Speed Post to all parents/students. 4) Hon’ble Chairman asked the Principal to issue a circular for all faculty members of RCOEM regarding suggestions on academic improvement from faculty members assuring that the suggestions will be taken seriously and will be discussed at the higher level for improvement.
Important discussions on 2nd June 2016:
1) Approved the action of Hon’ble Chairmen’s suggesting panel Experts and subject Experts as per para 5.1.4 and 5.1.5 of UGC Regulation to the Vice Chancellor for nomination two experts and two subject experts for constitution of Selection for the year 2017-18. 2) Considered and approved for applying to the State Government for self Financed University. Following resolution has been passed:- a) To convert existing Shri Ramdeobaba College of Engineering and Management, Katol Road, Gittikhadan, Nagpur to proposed Self Finance University, to be named as Ramdeobaba University. b) It was also resolved to attach the entire existing infrastructure like the land, buildings, teaching & non-teaching staff and other assets of the College to proposed Self Finance University. Principal, Shri Ramdeobaba College of Engineering and Management, Nagpur was authorized by the members to prepare the proposal for establishing self finance university and submit it to Maharashtra Government. c) It was also resolved to abide by the norms, rules and regulations set by various regulatory bodies (UGC, AICTE, UCTE, BCI, PCI, ACI and similar bodies) and State Government while transferring existing setup to the proposed University. 3) IQAC updates were reviewed. Hon’ble Chairman stressed that all the recommendations of all members of Advisory Board, Dr. Anil Kakodkar, Dr. Vedachalam and Dr. Mihir Chaudhury should be implemented in toto. IQAC will monitor the progress of implementation scruplessly.
5 | P a g e
4.2 Academic Council: Important decisions:
Some important minutes and decision of AC meetings held in 2016-17 are:
Sr No Agenda/ Resolutions Important Decision/ Action taken Based on the inputs henceforth departmental Presentation of Perspective plan of perspective plan are being presented in IQAC 1. Department of Computer Science. first before being presented to the Academic Council To ratify the approval granted by the Chairman Academic Council using special power to the 2. formats of affidavit Grade Card issuing scheme Formats sent for information to University and Degree Certificate for MBA (Integrated) students. To consider the Action Taken Report on the Actions taken on the basis of Academic 3. basis of Academic Assessment and Audit 2016- Assessment and Audit 2016-17 approved and 17. implemented. To consider the proposals of the Board of Studies with regard to the Scheme and Syllabus for PG programmes under (Choice based Credit System (CBCS) as well as absorption/ equivalence Scheme to absorb non- CBCS students in CBCS pattern to be implemented from academic session 2016-17. CBCS implemented for all PG programmes from 1. M. Tech (Geotechnical Engineering) session 2016-17. 4. 2. M. Tech (Structural Engineering) Students absorbed from non- CBCS students in 3. M. Tech (Industrial Engineering) CBCS pattern as per the approved absorption/ 4. M. Tech (Mechanical Engineering) equivalence Scheme. 5. M. Tech (Computer Science) 6. M. Tech (PEPS) 7. M. Tech (VLSI) 8. M.C.A. 9. M.B.A. 10. M.B.A. (Integrated) To consider changes in PG Ordinances/ Changes incorporated in PG Ordinances/ 11. Regulations 2015 in view of implementation of Regulations 2016 in view of implementation of CBCS. CBCS. To consider changes in Examination Manual The item was deferred. with respect to implementation of CBCS to be Meeting was held on 8th Sept. 2016 to discuss 12. implemented from academic session 2016-17. deferred item of Academic Council and this item was approved. To consider norms and provisions for The item was deferred. necessary action in case of gross negligence of Meeting was held on 8th Sept. 2016 to discuss 13. faculty members as proposed by the deferred item of Academic Council and this item Examination committee. was approved.
Steps taken to generate a deeper understanding of objectives of autonomy in the faculty. Awareness programmes are conducted for the newly recruited faculty members as well as all the students regarding the objective and spirit of autonomy.
6 | P a g e
4.3 Boards of Studies:
Board of studies conducted the scheduled meetings to discuss improvements in the Programme curricula by way of appropriate addition/deletions/ modifications in the scheme & the syllabi. The improvement process was facilitated by the presence of external experts appointed by university and from industries/ academia and alumni as well. Students’ participation in the academic planning has been ensured by adopting UG/PG students on BOS.
Following table shows the involvement of external experts in various BOS:
Board of Study No. of External Experts Board of Study No. of External Experts Civil 4 CSE 3 Industrial 5 Applied Sciences & Humanities 3 Mechanical 4 IT 3 Electrical 5 MBA 4 Electronics/ EDT 6 MCA 4 EC 4 Total 45
S Name(s) of Designation and Affiliation No BOS External Expert(s) on BOS Dr. D. M. Devaikar Professor in Civil Engineering, IIT Bombay 1 Civil Dr. Pawan Labhshetwar Senior Scientist, NEERI, Nagpur Engineering Dr. M. M. Ghangrekar Professor in Civil Engineering, IIT Kharagpur Dr. R. M. Daryapurkar Managing Director, Lars Enviro, Nagpur Professor, Mechanical Engineering, Dr. P.G Awate Industrial Engineering & Operations Research Group, IIT Bombay 400076 India Former, VIce Chancellor & Board of Management, SOA Dr. R.P Mohanty Industrial University, Bhubaneswar Khandagiri Odisha 751030 2 Engineering Dr. Ramesh Lakhe Director, Shreyas Quality management System Nagpur Director- Ernst & Young Global Delivery Mr. Anshuman Tiwari ServicesBangalore Senior Scientist, Central Cotton Research Institute, Mr. Gautam Majumdar Nagpur Dr. S. B. Thombre Professor, Mechanical Engineering, VNIT, Nagpur
Dr. A. K. Darpe, Associate Professor, IIT, Delhi Mechanical 3 Engineering Mr. S.R. Pimpale General Manager, Ashok Leyland, Bhandara
Mr. Rajesh Verma DGM, MOIL, Nagpur Dr A. R. Abhyankar Associate Professor, Deptt of Electrical Engg,IIT, Delhi. Dr P. S. Kulkarni Prof in Electrical Engg, VNIT, Nagpur
Electrical Dr R. M. Moharil Prof in Electrical Engg,YCCE, Nagpur 4 Engineering Director, POWERCON industry and Consultancy Mr S. B. Nasre Services, Nagpur Ms. Mudita Mathur PG Alumni
7 | P a g e
Dr.Abhay Karandikar Professor, Electrical Engg. IIT Powai , Mumbai 400076
Principal Scientist, Central Scientific Instruments Mr. Amol Bhondekar Organization ,Chandigarh
Mr. Aditya Bankar Senior Lead Engineer, Qualcomm, Bangalore
Professor, VLSI and nanotechnology Center Dr. R. B. Deshmukh VNIT,Nagpur Electronics/ EDT Professor, Visvesvaraya National Institute of Dr. Abhay Gandhi Technology, Nagpur-440010
Mr. Heramb Aligave Sr. Staff Engineer at Xilinx, Hyderabad 5 Dr.Abhay Karandikar Professor, Electrical Engg. IIT Powai , Mumbai 400076
Principal Scientist, Central Scientific Instruments Mr. Amol Bhondekar Organization ,Chandigarh
Mr. Aditya Bankar Senior Lead Engineer, Qualcomm, Bangalore
Professor, VLSI and nanotechnology Center , Dr. R. B. Deshmukh VNIT,Nagpur
Professor, Visvesvaraya National Institute of Dr. Abhay Gandhi Technology, Nagpur-440010
Mr. Heramb Aligave Sr. Staff Engineer at Xilinx, Hyderabad
Professor, Department of Electrical Engineering, IIT, Dr. V. M. Gadre Bombay.
Electronics & 6 Mr. A. R. Sawatkar General Manager, Mobile, BSNL, Yawatmal Communication Dr. J. D. Gulhane Dean Administration, JDIT, Yawatmal.
Dr. K. D. Kulat Professor, Dept of ECE, VNIT, Nagpur Dr. S. R. Sathe Professor, Dept. of CSE & Dean Planning VNIT,Nagpur Information Mr. Shreesh Vakil CEO OfficeBox, Nagpur 7 Technology Prof. K. M. Bhurchandi Professor, V.N.I.T,Nagpur Prof. Ganesh Ramkrishna Professor, IIT Bombay Associate Professor, Priyadarshini College of Prof. M.A. Tongo General Science Engineering, Nagpur 8 & Humanities Professor and Head, Department of Mathematics, Dr. G. P. Singh VNIT, Nagpur Dr. S. R. Sathe Professor, Dept. of CSE &Dean PlanningVNIT,Nagpur 9 CSE Mr. Shreesh Vakil CEO OfficeBox,Nagpur Mr. Sameer Bendre Chief People OfficerPersistent Systems, Nagpur 10 MCA Dr. Ganesh Ramkrishnan Associate Professor, CSE Dept., IITB
8 | P a g e
Dr. Umesh Deshpande Associate Professor, CSE Dept., VNIT
Mr. Satin Katiyar CEO & Founder, Kratin Software Solution Pvt. Ltd.
Associate Software Architect, Persistent System, Pvt. Mr. Vineet Kapoor Ltd. Nagpur
11 Dr. Vinayak Deshpande Professor & Head, DBM, RTMNU, Nagpur
Mr. Pradeep Zoting GM-IR, Mahindra and Mahindra Ltd., Nagpur MBA Dr. Kavita Laghate Head/Director, JBIMS, Mumbai
Prof. M. M. Fadnavis Associate Professor, IMT, Nagpur
Professor, Department of Metallurgical Engineering & Dr. A. R. Kulkarni Applied Materials Science, IIT Bombay) 12 Sciences & Dr. Mahesh Yenkie Professor of Chemistry, L.I.T., Nagpur Humanities Dr G. P. Singh Prof., Mathematics Dept., VNIT, Nagpur
9 | P a g e
5.0 PROGRAMME CURRICULA-HIGHLIGHTS OF CHANGES / DELETIONS / ADDITIONS OF COURSES
It should be noted that 2016-17 is the sixth year of grant of autonomy. Most of the changes in scheme and curricula were adopted while changing from university to autonomous pattern. In subsequent years, amendments were made as found necessary and the same are part of earlier ASERs. No major modifications were made in 2016-17 as the consensus was to adopt choice based credit system as mandated by UGC. It was decided to make major modifications as desired by UGC and as based on our own experiences and data collected under autonomous status while adopting CBCS.
Curriculum for autonomy was carefully designed keeping in mind the Industry requirement, feedback from Industry and academia. Few courses from university were dropped, amalgamated, overlaps removed, contents revised and upgraded. Lot of emphasis was given on electives and their content so as to steer standards to their field of interest. Mini projects, Seminar and case studies were introduced as credit courses, instead of being audit courses as was in university pattern. Many subjects were re-named. Names of many subjects are changed as it gives better information/ understanding of the content of the course.
Following tables shows various initiatives taken by BOS for improvement in the curriculum & the teaching-learning process.
5.1 New experiments & initiatives as reported by the programmes in its curricula in 2016-17 are shown in following table:
S Name of Board Short description of the initiative / experiment No of Study 1. New experiment related to calibration of measuring instrument added in course Instrumentation & Metrology 1 Industrial 2. New Experiments Added in Course Methods Engineering 3. Students are asked to make process planning sheet for course INT101 Engineering workshop Mechanical 1. PG- New experiment on solar energy added in solar lab 2 Engineering 2. UG- New experiment added in MM lab 1. Industry internship scheme introduced in 2016-17 and is implemented in 2016-17. Computer 3 2. Change in scheme of PG : New scheme and curriculum for PG Course Science & Engg based on CBCS pattern is designed which is to be implemented from the session 2016-17 and onwards. 1. For the design and conduct of continuous assessment, more attention Applied has been given to critical discussion amongst the teachers for Sciences & improvement. In order to provide support for slow and fast learner Humanities students, a mechanism has been taken in consideration to motivate the (Physics) students. 1. Mini projects are introduced in courses like Digital Logic Design,Microprocessors and Interfacing, Advanced Processors and embedded systems and Analog Communication. Electronics 2. Simulation based as well as circuit level design experiments are 5 Engineering UG introduced. Industry based projects are encouraged. 3. The Industry Internship Scheme for VIII semester students of B. E. Electronics Engineering was finalized. 4. The credit transfer scheme for the students of III semester Electronics 10 | P a g e
Engineering with minimum CGPA of 7, for pursuing IV semester course work at College of Engineering, Pune was introduced. 1. Introduces experiments based on Industry standard tool, Mentor Graphics for Digital and Analog CMOS Design. 2. Students are exposed to verification methodology by introducing Electronics experimentation on Assertion based verification of digital systems, OOP Engineering PG concepts, design of digital systems using systemVerilog. (VLSI) 3. The students are exposed to modern day complex embedded system by introducing experiments on FRDM-KL25Z Cortex-M0 hardware and Keil software platform to build many applications. 1. New experiment related to design of IIR and FIR Filter using FDA tools of given specifications was added in Digital Signal Processing 2. New experiments was added in Sampling and Reconstruction of signals 5 EDT was added is Simulation lab (EDP-312) 3. New experiment related to conversion of analog filter to digital filter was added in Digital Signal Processing 1. Industry internship scheme introduced in 2016-17 and is implemented in 2016-17 for P. G.. 6 Civil Engineering 2. Change in scheme of PG : New scheme and curriculum for PG Course based on CBCS pattern is designed which is to be implemented from the session 2016-17 and onwards. 1. Choice based credit system (CBCS) is implemented for MCA semester-1 and semester-2 from session 2016-17. 2. Under CBCS scheme the subjects were categorized under four categories as CORE courses, Ability enhancement courses, Department specific electives and Open electives. 3. All courses of Gate exam were included as Core courses in the MCA scheme and syllabus. 7 MCA 4. A new policy of completing the credits by undergoing summer term was finalized. 5. Introduced completely project based labs in CBCS pattern to enhance the programming skills of the students.(Game Programming Lab, Mobile Application Development Lab) 6. For exceptional students who have completed 120 credits out of 150 credits by opting additional courses in First Year & Second Year can go for full one year Project Internship. 1. Introduced IT Skill Lab and offered to MBA I Semester Students. 2. Introduced Communication Skill Lab and offered to MBA I Semester Students. 9 MBA 3. Introduced Analytical Skill Lab and offered to MBA II Semester Students. 4. Introduced Corporate Grooming Lab and offered to MBA II Semester students. 1. PCB design using Proteus (Open Software) in Mini Project of VI Sem BE was introduced. 2. Transmission line performance demonstration in course FACTS of VIII Sem BE Electrical. Electrical 3. Microcontroller kit design in course Microcontroller and application to 10 Engineering Power Converter of III sem M. Tech (PEPS). 4. In EHV Substation Design and Erection Subject of BE VIII Sem, a guest lecture was organised on “Substation SLDs in Autocad” by Mr. Devashish Joshi, Director MNJ Electrical Consultants, Nagpur to give the insight on various EHV Substation busbar schemes, their SLDs, Plans, and Elevation 11 | P a g e
etc as a part of new practice in teaching learning process. 5. In course Electrical Measurements and Measuring Instruments of BE IV Sem analog instruments, internal structure of different types of Meters (Hardware) i.e PMMC, MI AND ELECTRODYNAMOMETER type of instruments was demonstrated to students by opening the damaged meters and its principle of working was explained with the help of animated videos. 6. Two new experiments on MATLAB were added in Computer Application in Power System lab as mentioned below: a. To form Bus Incidence matrix using MATLAB. b. Formation of ZBUS AND YBUS matrix using MATLAB.
5.2 Courses Discontinued/Modified from University Scheme: In general, no new courses were added/ discontinued in this session. However, some courses were modified as per requirement.
S Name of Board Courses Discontinued/Modified from University Scheme No of Study INT202- Principles of Management & Managerial Economics 1 Industrial INT403 Ergonomics INT305-2 Human Resources Management CST404-1 Internetworking & TCP/IP CST319 Computer Graphics and GUI Design Technologies 2 CSE UG CST557 Advanced Digital Image Processing CST599-1 Advanced Programming Techniques CST599-2 Graph Mining 1. The course contents of Computer Organization (ENT 308) were modified. MIPS based implementation proposed to enhance standard learning outcome which would strengthen students understanding, analysis and interpretation of program execution, its impact on performance and other design metrics. Electronics 3 2. The course contents of the course Arduino Playground (ENT 311-3) Engineering UG have been changed to include the contents regarding C-language and Displays. 3. To understand the concept of Action potential the course contents related to Physiology of the human body were included in the Course Medical Electronics (ENT 404-3).
Modified the contents and title of course Physical Electronics & Circuit Simulation (ENT 504) to Semiconductor Devices New Courses Electronics 1. Embedded System and RTOS (ENT553) Engineering PG 2. Advanced Digital Signal Processing (ENT555-3) (VLSI) 3. System Verilog for Verification (ENT 557) 4. VLSI Design Automation (ENT560) 5. Wireless Sensor Network (ENT599-1)
Courses Modified: 1. In the course Multimedia and its applications MCT623 some topics 4 MCA related to video audio file formats and how these are stored on devices etc., video audio editing tools and animation tools like
12 | P a g e
GYMP, BLENDER, and LNKSCAPE are included. 2. As Computer Networks and Network security courses are related, they are introduced in the same semester. 3. Testing tools like selenium, etc were added in course MCP607 Concepts in Software Engineering Lab. Also some portion on Agile technology is also introduced in the course MCT607 Concepts in Software Engineering. 4. MCT504 Discrete Mathematics and Graph Theory is offered as a core subject and not as an elective. 5. In course MCT720, the Data warehousing component was replaced by data mining components and subject is renamed as Data Mining from Data Warehousing and Data Mining. In course Artificial Intelligence MCT720-1, some components of neural networks were added in unit6 and the topic Expert system design was removed. Best First Search and other similar algorithms were removed from unit2. In course MCP720(01) Artificial Intelligence Lab, machine learning tools like Tensorflow, Café, Optaplanner and torch were introduced instead of Prolog/Lisp for solving constraint satisfaction problems. Assignments based on recent topics like Deep Learning, Pattern recognition, voice automation etc was suggested in this lab. 6. In the syllabus of MCT 535, Theory of Automata and Formal Languages, the topic regular expressions was added and units I, II, III were restructured. The courses contents of Advance Databases MCT629-01 were revised. A topic Parallel database from unit 2 is removed. Unit2 and 5 are combined in unit 1. In unit 5, Concepts like How Cassandra, MongoDB etc are different from RDBMS are focused upon. NoSQL databases, key value store, document store were also added as unit 5. 7. The contents of course Internet and Web Technologies MCT626 of 4th semester were restructured. Courses like Cloud computing and network security are offered as Department Specific Elective. In MCT721, Elective-III, Introduction to Web Development, advanced topics were added in unit 1, 4 and 6.
Courses Discontinued: 1. MCT-504 Digital Electronics & Microprocessors 2. MCP-504 Digital Electronics & Microprocessors Lab 3. MCT-514 Computer Programming 4. MCP-514 Computer Programming Lab 5. MCT-507 Statistics and Probability 6. MCT-509 Systems Programming 7. MCT-517 Financial Accounting 8. HUT-601 Drafting Skills 9. MCT617 Distributed Systems 10. MCP-619 Open Source Software Lab 11. MCT-711 Network Security 12. MCT712 E-Commerce and its Applications
13 | P a g e
The contents of course RF Circuit Design (ECT410-2) (Departmental 5 Electronics & Elective – IV) were modified. RF based mixers and amplifiers are Communication included in the syllabus for better design process.
MBA Courses Modified: MBA Program 1. MBT551 - Financial Management 2. MBT554 - Entrepreneurial Development 3. MBT555 - Financial Accounting 4. MBT557 - Information Technology Management 5. MBP552 - Communication Skill Lab 6. MBT561 - Applied Operations Research 7. MBT563 - Cost & Management Accounting 8. MBT564 - Operations Management 9. MBP553 - Analytical Skill Lab 10. MBT568 - Environment Management MBA (Integrated) Program 1. MIT101 - English Language 2. MIT104 - Human Skills 3. MIT107 - Business Communication 4. MIT112 - Environment Management 5. MIT207 - Entrepreneurship Development 6. MIT211 - Operations Management 7. MIT301 Financial Management 8. MIT302 - Change Management 9. MIT303 - Consumer Behaviour 7 10. MIT307 - Quantitative Techniques 11. MIT308 - Banking and Financial Services 12. MIT401-5 - Business Tax Planning 13. MIT402-2 - Commercial Banking in India 14. MIT402-3 - Merger & Acquisition and Corporate Restructuring 15. MIT402-4 - Security Analysis 16. MIT402-5 - International Finance and Trade 17. MIT402-6 - Project Planning & Financing 18. MIT402-7 - Corporate Taxation 19. MIT402-9 - Portfolio Management 20. MIT402-9 - Portfolio Management 21. MIT403-3 - HR Audit & Analytics 22. MIT404-4 - Retail Management 23. MIT404-7 - Rural Marketing 24. MIT404-9 - Marketing Channel Management 25. MIT405-7 - Operations Planning & Control Courses Discontinued 1. MBT651-7 - Consumer Behaviour & Marketing Research 2. MBT653-4 - Industrial Relation and Labour Laws 3. MBT653-6 - Change Management & Organization Development 4. MBT656-1 - Dynamics of Family Business 5. MBT656-2 - Legal and Tax Environment
14 | P a g e
6. MBT656-3 - Financing of Emerging Enterprise 7. MBT656-7 - Cost Management and Control Systems 8. MBT656-8 - Business Communication 9. MIT401-4 - Industrial Marketing [MBA(I)]
5.3 Number of new courses in the adopted scheme
Sr Name of Number of new courses in the adopted scheme No Board of Study 1 Electronics 1. ENT 405-4 Designing the Internet of Things Engineering 2. ENT 311-4 Designing with Raspberry Pi UG New Courses 1. Embedded System and RTOS (ENT553) Electronics 2. Advanced Digital Signal Processing (ENT555-3) Engineering 3. System Verilog for Verification (ENT 557) PG (VLSI) 4. VLSI Design Automation (ENT560) 5. Wireless Sensor Network (ENT599-1) 4 CET 599-3 Prestressed Concrete Structure Civil (PG) CET 599-4 Watershed Management as open electives in PG scheme
6 S.No Course Code Course Name 1 MCT530 Computer Organization & Architecture 2 MCT531 Concepts in Data Structures 3 MCP531 Concepts in Data Structures Lab 4 MCT532 Principles of Programming Languages 5 MCT533 Discrete Mathematics & Graph Theory 6 MCP533 Numerical Methods lab 7 MCT534 Principles of Management 8 MCP534 Basics of Computer Hardware Lab 9 HUP 501-1 Communication Skills 10 HUP 501-2 Environmental Science MCA 11 MCT535 Theory of Automata & Formal Languages 12 MCT536 Introduction to Operating System 13 MCP536 Computer Workshop-I Lab 14 MCT537 Concepts in Software Engineering 15 MCP537 Concepts in Software Engineering Lab 16 MCT538 Object Oriented Programming-1 17 MCP538 Object Oriented Programming-1 Lab 18 MCP539-1 Game Programming Lab 19 MCP539-2 PHP Programming Lab 20 HUP502-1 Soft Skills 21 HUP 502-2 Professional Practice & Ethics
MEP 404-5 Mechatronics Lab Mechanical 10 MEP 409-2 Renewable Energy Systems Lab (UG) MET 403-5, Composite Material
15 | P a g e
Mechanical (PG, M.Tech MET562 Advanced computational techniques H.P.E) UG BE Electrical 1. EET304-3: .Energy Management System and Audit 2. EET409-1: Embedded systems 3. EET304-4: Design of Data Acquisition & Logic Controller 4. EET409-2: Power Quality 5. EET403-2: Utilization of Electrical Energy Electrical 6. EET409-5 Industry Elective I 11 Engineering 7. EET410-5 Industry Elective II
PG: M. Tech PEPS 1. EET556 : FACTS and HVDC Transmission 2. EET651-2 : Electrical vehicle 3. EET651-3 : Renewable power generation Sources 4. EET652-3 : Industry Offered Elective
5.4 New electives added and existing electives discontinued
S No Name of Board of Study New electives added and existing electives discontinued Electronics Engineering UG NIL New Electives Added: 1. VLSI Design Automation(ENT560) 2. Advanced Digital Signal Processing(ENT555-3) Electronics Engineering PG 3. Wireless Sensor Network(ENT599-1) 1 (VLSI) Discontinued Electives: 1. Memory Design and Testing(ENT510-1) 2. Wireless digital communication(ENT603-2) 3. Advanced Embedded Systems (ENT603-3) Mobile Apps Development Business Intelligence 2 IT Infosys, Pune Infosys, Pune and Infocepts, Nagpur New open electives are added namely 5 Civil Engineering CET 599-3 Prestressed Concrete Structure CET 599-4 Watershed Management New Electives Added: 1) MCP-533 Numerical Methods lab 6 MCA 2) MCP-534 Basics of Computer Hardware Lab 3) MCP539-1 Game Programming Lab 4) MCP539-2 PHP Programming Lab Mechanical (PG) New Electives Added: MET555-1, Microfuidics MET599-1, mechatronics 8 MET599-2, Automobile Engineering MET651-3, Advanced Turbo Machineries INT651-1, Total quality management
16 | P a g e
INT651-2, Value engineering INT651-3, System design and engineering MET652-4, Advanced I.C. Engines and alternate fuels INT652-1, Advanced Industrial Engineering Techniques/computer and database techniques INT652-2, Manufacturing economics and analysis Electives Discontinued: Nil
MBA NEW ELECTIVES ADDED: MBA Human Resource Management MBT653-11: Organization Development MBT653-12: Competency Mapping MBT653-13: Employer Branding MBT653-14: Industrial Relations MBT653-15: Labour Laws Finance Management MBT652-11: Wealth Management MBT652-12: Insurance Management Operations Management MBT654-11: Ergonomics in Industrial Health & Safety Management Entrepreneurship & Family Business MBT656-11: Launching and Managing an Enterprise MBT656-12: Buying an Existing Business MBT656-13: Entrepreneurial Innovation MBT656-14: B2B Marketing MBT656-15: Knowledge Entrepreneurship MBT656-16: Logistics Management 9 MBT656-17: Family Business Management MBT656-18: Business Tax Planning MBT656-19: Entrepreneurial Finance Marketing Management MBT651-11: Marketing Analytics MBT651-12: Social Marketing MBT651-13: Digital Marketing MBT651-14: Consumer Behaviour MBT651-15: Marketing Research
NEW ELECTIVES ADDED: MBA (I) Human Resource Management MIT403-11: Organization Development MIT403-12: Competency Mapping MIT403-13: Employer Branding Finance Management MIT402-11: Wealth Management MIT402-12: Insurance Management Entrepreneurship & Family Business MBT401-11: Launching and Managing an Enterprise MBT401-12: Buying an Existing Business MBT401-13: Entrepreneurial Innovation
17 | P a g e
MBT401-14: B2B Marketing MBT401-15: Knowledge Entrepreneurship Marketing Management MBT404-11: Digital Marketing MBT404-12: Marketing Analytics MBT404-13: Marketing Research MBT404-14: Social Marketing Operations Management MBT405-11: Ergonomics in Industrial Health & Safety Management Electives Discontinued: NIL Added UG BE Electrical 1. EET409-5 Industry Elective I 2. EET410-5 Industry Elective II 10 Electrical PG: M. Tech PEPS
1. EET556 : FACTS and HVDC Transmission 2. EET651-2 : Electrical vehicle 3. EET651-3 :Renewable power generation Sources 4. EET652-3 Industry Offered Elective
5.5 Number and names of open electives
S Name of Board Number and names of open electives … No of Study 1. ENT 311-1 Consumer Electronics Electronics Engg 1 2. ENT 311-2 IC design Technology UG 3. ENT 311-3 Arduino Playground Electronics Engineering PG Wireless Sensor Network (ENT599-1) (VLSI) 1. PHT301: Quantum Mechanics for Engineers 2 Physics 2. PHT302: Nanotechnology 3. PHT303: Solid State Lighting Three electives till 2016-17 and one was added in 2017-18 4 Humanities Till 2016-17 - HUT300-1: Employability skills, HUT300-2: Challenges in HRD, HUT300-3: Psychology for Professional Growth Subject offered to BE: 1) MBT610-1: Financial Management 2) MBT610-2: Entrepreneurship Development 5 MBA 3) MBT610-3: Innovation & Entrepreneurship Subject offered to MCA: 4) MBT599: Entrepreneurship Development 1. MAT301 : Combinatorial Theories 7 Mathematics 2. MAT 302 : Numerical Techniques 3. MAT303: Statistical methods for Business and Management 8 EDT 1. EDT 311-1 Industrial Electronic system Design
CST322-1 Introduction to Mainframes 9 CSE CST322-2 Foundation of Business Intelligence
18 | P a g e
CST322-3 Salesforce Technology CST322-4 Business Intelligence and Its Applications CST322-5 Mobile Technology CST322-6 Insight into Cloud Computing CST322-7 Security Basics & Cyber Security CET599-1:Advanced Construction Materials & Techniques Civil Engineering CET599-2:Geoscience 10 (PG) CET599-3:Prestressed Concrete Structure CET599-4:Watershed Management CET314-1 Environmental Pollution Civil Engineering 11 CET314-2 Green Building and Vastu Concepts (UG) CET314-3 Appropriate Technology MCT 627 Introduction to Object Oriented Programming 12 MCA MCT 721 Introduction to Web Development Electronics and ECT309-1 Telecommunication Engineering 13 Communication ECT309–2 Introduction to Instrumentation System and Transducers Information ITT309-1 Course: Internet Technologies 14 Technology ITT309-2 Course: Information Systems 15 Mechanical 01, MET599-2 Automobile Engineering
Electrical EET 313-1 : Energy Management and Audit 16 EET 313-2: Industrial Drives
5.6 How open electives differ from diluted core
S Name of How open electives differ from diluted core… No Board of Study
With the concept of Open Elective a student can get introduced to new 1 Physics subjects from Physics Department but which were not initially available into the main stream curriculum. The level of the subject is suitable for BE and is a useful subject for the student from an Engineering point of view.
The courses in open electives are offered to BE and MCA students. These courses are business management oriented courses offered to technical 2 MBA graduates which are highly focused on business management practices and covers financial management tools, entrepreneurship development aspects and innovations in management practices. 1. MAT301: To expose student to understand the basic concepts of counting techniques to solve engineering problems. It also focuses on theory of divisibility, congruence and Number Theoretic Functions. 2. MAT302: To expose student to understand the important concepts of Numerical methods to tackle the problems in engineering that cannot be 3 Mathematics solved analytically. 3. MAT303: To provide understanding the concepts of Probability Distributions, Sampling Distributions and Estimation & Testing Hypothesis It also focuses on Time series, Forecasting & amp; Index numbers & amp; Decision theory. Electronics Core electives courses offered in electronics engineering are the advanced 4 Engineering courseswhich helps students in deciding career prospects in different streams 19 | P a g e
(UG) of electronicsengineering whereas open electives are designed for students of all disciplines whichare new courses from other streams or courses from the same stream but which werenot initially available into the main stream curriculum. ENT599-2: The course introduces digital system design flow and approaches. Electronics Understanding of combinational, sequential, arithmetic circuits Engineering PG &theirhierarchical implementation. Introduction to architecture of (VLSI) Programmable Logic Devices like FPGA. EDT 311-1: To expose student to understand the electronic product development process, also to design small electronic system based on 4 EDT microcontroller 8051. To understand the working of various communications protocol and PCB design. HUT300-1: Employability skills looks into developing skills for better perform as better professionals by understanding generic skills, take better decisions at workplace, have better oral communication in professional situations, acquire proficiency in drafting skills, perform better in competitive examinations for higher studies. HUT300-2: Challenges in HRD looks into understanding the role of psychology with special reference to industry, understand the importance of values, attitudes and job satisfaction, carry out job analysis for the better management of human resources, handle stress at work place and develop the sense of well being, oriented in multiculturalism, understand the role of 5 Humanities counseling in industry HUT300-3: Psychology for Professional Growth looks into developing ability to enhance the self awareness of students, develop competency of effective interpersonal relationships, facilitate their professional growth with the help of knowledge of positive psychology, facilitate their professional growth with the knowledge of different intelligence, practice ways and methods of bringing about self development in professional world, handle social media in effective manner. The contents of these courses are different from any of the courses taught in any of the semesters. CET 314-1 Environmental Pollution : To enable students to Explain various causes of environmental pollution and necessity of their control. To make students aware about the basics of solid waste management and treatment and disposal of waste water. . It is an innovative course which enables engineers to understand wide aspects of environmental pollution and Civil develop a proper thinking process to control it. 6 Engineering CET 314-2 Green Building and Vastu concepts: To enable students to assess a (UG) building on the norms available for green building. To make students capable of suggesting materials and technologies to improve energy efficiency of building. Looking at the current scenario of smart cities and smart societies, knowledge about Green Buildings will play a crucial role for engineers in forthcoming years. CST322-1 Introduction to Mainframes: The proposed elective course exposes the CS/IS students to mainframe Technology. The Core Modules of this Elective includes Introduction to Mainframe concepts, Mainframe Operating Systems, Introduction to Job Control Language, COBOL, Overview of DB2. 7 CSE This program is independent of any organization.
CST322-2 Foundation of Business Intelligence: Foundation of Business Intelligence provides a cross-disciplinary approach to examine, within the larger 20 | P a g e
context of the corporate knowledge resource, a range of issues associated with the gathering, analysis and distribution of business intelligence. It develops a basic understanding of the fundamental concepts including: identifying sources of information that are harnessed for business intelligence; reviewing the contributions of competitor analysis, environmental scanning, and business forecasting; assessing relevant IT systems; investigating the design and management of business intelligence systems; and, examining the impact of cognitive bias on decisions.
CST322-3 Sales force Technology: It enables the students to understand core concepts of cloud, database essentials and framework of Sales force, Explore the fundamental of apex and visual force for creating standard and custom controllers. Allows the students to use tools and techniques for exporting/importing data through Force.com and understanding the process of deployment of an app in the cloud. The students canuse batch processing to perform data intensive tasks offline, Utilize external APIs to integrate any third party system with Sales force.
CST322-4 Business Intelligence and Its Applications: BIA elective course exposes engineering students to Business Intelligence domain. The Core Modules of this elective includes introduction to BI terminologies and framework, basics of data integration (Extraction Transformation Loading), introduction to multi- dimensional data modeling, basics of enterprise reporting and application of the concepts using open source tools. This elective will significantly help the students to get an exposure to Business Intelligence domain and understand the applicability of concepts using open source tools and leverage the knowledge gained as a competitive edge in their career in business intelligence space.
CST322-5 Mobile Technology: This subject is used to make aware about current mobile trends. Most of the Industries are working on developing the software related to the mobile devices. Therefore it is necessary to make aware the students about current mobile development technology. It covers iOS, android and angular technology.
CST322-6 Insight into Cloud Computing: Insight into Cloud Computing is a blend of Object Oriented techniques applied in Cloud Computing which offers endless possibility for developing highly elastic and scalable enterprise applications and software as a service. It includes techniques for building, deploying, and maintaining applications on Microsoft Azure and using cloud as the infrastructure for existing and new services.
CST322-7 Security Basics & Cyber Security: The students can understand concepts of cyber security to provide security solutions to the real world threats, attacks. They know the various hacking tools and techniques used for ethical hacking. They can Distinguish between threats, APT's and their relevant countermeasure. They can Focus on Developing Secure Code and Secure Applications. They understand of the importance of data security and its relevance within the IT industry. 1) MCT 627 Introduction to Object Oriented Programming- This course is 8 MCA specifically catered to make Non CS/IT background students to grasp the fundamentals concepts of OOPS. This open elective is such designed that 21 | P a g e
even a novice can think in terms of Object oriented paradigm and can understand real life applications of it. 2) MCT 721 Introduction to Web Development- This course provides the fundamental knowledge of dynamic interaction techniques using web pages. It also provides the students with an utmost learning platform for client side frameworks used in industries. Internet Technologies: This course consists of basic Internetworking concept and technologies along with issues related to ethics and privacy related to Internet. After completion of this course, students will be capable of designing web pages using HTML and publish websites. Information 9 Technology Information Systems: This course consists of concept of data organization and management. It defines the role of telecommunication and Internet in the context of Information System and apply the concept of Decision Support Systems and development. The open elective course is offered to BE students of all branches to get the interdisciplinary knowledge. The open electives courses offered by the 10 Electrical electrical engineering department mainly focused on the energy management and industrial automation.
5.7Local need/ industry based courses
S Name of Board Local need/ industry based courses No of Study Industry Based Course:- Kizora Lab/ Software Engineering Lab, Kratin Lab/Computer Workshop-IIlabs are designed in collaboration with reputed IT companies to improve the employability of students.
Local need:- In collaboration with Jigyasa Research Centre, Nagpur, MCA second year students underwent internship cum training session after which the following 3. MCA apps were developed and successfully deployed. 1. Bhrushund Ganesh Mandir App 2. Dikhsa Bhoomi Nagpur App 3. Athrabhuja Ganesh Mandir App, 4. Sai Mandir App, 5. Panchmukhi Ganesh Mandir App, 6. Sidhivinayak Mandir (Kelzar) App The open elective Foundation of Business Intelligence is conducted by Infocepts 4. CSE pvt. ltd. Nagpur. Mobile technology is conducted by GlobalLogic , Nagpur A Course named “Industrial Visit & Case Study” in BE V sem Electrical scheme is introduced under autonomy. In this course complete class is divided in groups Electrical contain only two students. Each group has to visit the HT industry and prepare a single line diagram from incoming till load point. No group can repeat the industry.
5.8 Involvement/ consultation with alumni need/ industry-based courses: Some of the board of studies has alumni as the external members. Further, discussions are made with the alumni time to time for understanding the changes required in curriculum to match latest developments. 22 | P a g e
6.0 R&D ACTIVITIES, PUBLICATIONS, CONFERENCES
Number of publications / presentations (Dean R&D Data) S No Journals Conferences National International National International 3 82 18 126
6.1 Incentives for conducting research work in the College
Faculty members are encouraged to:
Participate in Seminars, workshops conducted by Premier institutes / industries / R&D organizations Organize conferences and seminars, undertake research activities and submit research proposals to AICTE, UGC, DST, SERB Organize guest lectures from industries and other premier institutes within and outside India Contingency Grant (Imprest) of Rs. 5000 is made available to department. Welfare Schemes:Mediclaim Insurance Scheme, Group Insurance Scheme, Staff Co-operative society Incentives For Publications / Consultancy/Patents
Peer Reviewed National Journal Rs. 5000/-
Peer Reviewed International Rs. 10,000/- Journal
National /International Registration fees and Travel expenses Conference
Patent Awarded Rs.10,000/-
Without using institute infrastructure Principal Investigator Share :72% Institute Share :28% Consultancy Using institute infrastructure Principal Investigator Share :47% Institute Share :53%
Motivational Schemes for Research Faculty members pursuing research are entitled for: Sponsorship for QIP Three months full paid leave for PhD Reimbursement of PhD fees
R & D Strategies and Perspective Plan Motivating Faculty members to write books and get it published by a reputed publication house. To increase the center of higher learning(M. Tech) and the center of research place (Ph. D)
23 | P a g e
Setting up a sub-committee to review the quality of papers and also to ensure strict compliance to Anti-Plagiarism standards so that faculty members are motivated to take up genuine research. To increases Interdisciplinary research which will be lead to the societal product design. Improving Cooperation with various R&D agencies across India and Industries Motivate faculty members to take up projects and research leading to generation of Patents and copyright. Making mandatory for all Doctorate faculty members to put in one research project every two years leading to creation of Intellectual property. SCI Publication is made mandatory for Ph. D Thesis submission.
6.2 Incentives to faculty for joining a PhD Program
The University approved faculty members of RCOEM pursuing part-time PhD at RCOEM or Institutes of national repute like IITs/IISc/IIITs/NITs and other reputed Institutes / Universities consistently ranked among top 50 in NIRF only shall be eligible for reimbursement of annual PhD fees. Other terms and conditions shall be applicable as per R & D policy of the college. (Refer Policy Norms for Pursuing Higher Studies).
The University approved faculty members of RCOEM those are pursuing Part-Time PhD at RCOEM or Institutes of national repute like IITs/IISc/IIITs/NITs and other reputed Institutes / Universities consistently ranked among top 50 in NIRF may get up to three months full salary study leave or six months half salary study leave for PhD work. The above mentioned condition is applicable for the period of five years from the date of PhD registration. Study leave may be availed in parts and maximum upto three parts. However, the decision regarding this incentive shall be taken by Hon’ble Chairman on a case to case basis.
6.3 Faculty Contributions in Journals:
There has been progressive and impressive improvement in the R&D activities undertaken by the departments. With the addition of several new state of the art equipments and software, especially at PG level, better R&D has resulted in several publications and presentations at the national and international platforms. This participation is not only from engineering faculty but also from faculties of applied sciences & humanities. Although the list too exhaustive to be accommodated in this report, some of the important contributions are as below:
Journal Publications (Dean R&D Data) Sr Paper Title Author(s) Publication Details Impact Factor No with date and webpage* NATIONAL JOURNALS 1 Assessment of Resonance Effects A. M. Gharad i-manager’s Journal on - on Railway Bridges Under Moving Structural Engineering Loads 2 Implementation of Wireless Dr. S. B. Pokle International Journal of - Remote Monitoring System for Instrumentation and Control Airport Operations Engineering 3 The State-of-the-Art of the Prof. Journal of Information - Applications of RTS in Various PunamKhandar technology and Its Applications Areas: A Survey
24 | P a g e
INTERNATIONAL JOURNALS Determination of Total Phenolic A.Bharati International Journal of Green 1 and Flavanoidcontenets in and Herbal Chemistry, Rauvolfiatetraphylla Linn.
Plasmonic nanostructured Zn/ZnO Priti A. Journal of CO2 utilization Impact factor : composite enhances carbonic Mangrulkar, 4.292 2 anhydrase driven photo catalytic hydrogen generation. Synthesis, characterization, anti J. Heterocyclic Chemistry, Impact factor : bacterial and antifungal activity of Chandrashekha 0.893 3 novel 2-(2-hydroxy-5((aryl)- r Pandhurnekar diazenyl)phenyl)-3(4-hydroxy phenyl)-thiazolidin-4-one Adsorption and Kinetic behavior of Chandrashekha J. Chemical Technology and 4 fly ash used for the removal of lead r Pandhurnekar, Metallurgy, from an aqueous solution. Best Position of R.C. Shear Wall due Gourav International Journal of 5.169 5 to seismic loads Sachdeva Engineering Research and Applications Price Escalation Forecasting in M. S. balwani International Journal for 2.173 6 Construction Due to Inflation Research in Emerging Science and Technology Dump slope stability analysis based B. P. Chelani International Journal for - on rainfall and soil characteristics – research in applied science & 7 a case study Engineering Technology (IJRASET) Effect of residual stress in plate Dipak Nakhate International journal for - 8 section scientific research and development Adsorption of indigo carmiine dye Prof. T. B. Journal of Hazardous, Toxic, - 9 onto acacia nilotica (babool) Gupta and Radioactive Waste sawdust activated carbon Deficient shoulder width and its Dr. A. K. Sharma International journal of civil - 10 influence on raod crash frequency engineering & Technology on rural highways Analysis of high rise building for Mr. Saurabh International Journal for - 11 wind load Kawale Scientific Research & Development Analysis and Design of Mr. Sohail Khan International Journal for - Underground Retaining wall by Science and Advance Research 12 using Beam and Column as In Technology Buttresses Analysis and Design of beam and Mr. Sohail Khan International Journal for - column in which beam behave as a Science and Advance Research 13 column and column behave as a In Technology beam Development of thermally V A Dakwale Proceedings of the Institution 14 insulated sustainable building of Civil Engineers Engineering model Sustainability Analytical and experimental studies A H Padade International journal of on cemented stone column for soft geomechanics, ASCE 15 clay ground improvement Civil Engineering
Infrastructures Journal
25 | P a g e
Managing Disasters using pressure M. R. Mulay International journal of dependent demand analysis- case geomechanics, ASCE 16 study of shirpur town Civil Engineering Infrastructures Journal Prediction of quantitative response Dr. A. H. Journal of testing and of under reamed anchor piles in Padade evaluation ASTM 17 soft clay using laboratory model study Critical factor of large township P. D. Hiwase Environmental development building and its relevance in & sustainability, Springer 18 environmental audit: a critical study Static and Dynamic analysis of Shweta Laddha International Journal of Adv. 19 masonry infilled RC frame Research in science and engineering An Approach for IR using Extraction Dr. M. B. International Journal On 20 & Expansion of Micropost by KEA Chandak Computer Science & Algorithm Engineering(IJCSE) An Approach to Sentiment Analysis Prof. D. A. Smart Trends in Information 21 on Unstructured Data in Big Data Borikar Technology and Computer Environment Communications A Secure OTP Algorithm using Sonal Pannase International Journal of 22 Smartphone Application- Proposed Science and Research (IJSR) Approach A Secure OTP Algorithm using Sonal Pannase International Journal of Latest 23 Smartphone Application Trends in Engineering and Technology (IJLTET) Mining Precise Cause and Effect Swati Hira, Springer Plus 24 Rules in Large Time Series Data of Socio-Economic Indicators An Approach for Efficient Machine Prof. S. G. Smart Trends in Information 25 Translation using Translation Rawat Technology and Computer Memory Communications Object Localization Analysis Using Hrushikesh Smart Trends in Information 26 BLE: Survey Zadgaonkar Technology and Computer Communications Feature Selection for Image Preeti International Journal of Retrieval based on Genetic Khushwaha, Interactive Multimedia and 27 Algorithm Artificial Intelligence,
Particle Swarm Optimization Based Shailendra S. Springer International on the Winner’s Strategy Aote Publishing AG 2016 B.K. 28 Panigrahi et al. (Eds.): SEMCCO 2015, LNCS 9873, Mathematical Optimization by Shailendra S. Book chapter of Handbook of Using Particle Swarm , Genetic Aote Research on Soft Computing 29 Algorithm, and Differential and Nature-Inspired Evolution and Its Similarities Algorithms, IGI Global Publication Product Recommendation based Saurabh Joshi, Intenational Journal of 5.947 on customer behaviour using Data Pranav Phate, Advanced Research In 30 Mining Naman Jain Computer and Communication Engineering
26 | P a g e
Efficient scheduling of dynamic Tausif Diwan Journal of Engineering Science 0.38 31 programming algorithms on and Technology multicore architectures Smart Farming System Using Data ChandakPriyank International Journal of 32 Mining a Innovatice Science and Research technology Smart Farming System Using Data Chandak International Journal of 33 Mining Priyanka Applied Engineering Research Implementing data security Deepali Kosare International Journal 2.49 using odd-even Threshold of Advance Computing 34 Cryptography in cloud computing in Electronics Technology Analysis of Replacement policies of Vidya dahake PARIPEX-INDIAN JOURNAL OF 35 cache mamory RESEARCH Transient Fault Injection in 4 bit VaijayantiPanse IOSR Journal of VLSI and Signal 36 Ripple Carry Adder using Random Processing (IOSR-JVSP) Sequence Generator SDR based Modulator design and R. D. Raut International Journal, IJIRSET, 6.209 37 Implementation Using GNU Radio” Vol - 6, Implementation of Speed Efficient Prof. Jitendra B. International Journal of IJIRAE: Impact Image Processing algorithm on Zalke Innovative Research in Factor Value – Multi-Processor System on Chip Advanced Engineering (IJIRAE) SJIF: 38 (MPSoC) Innospace, Morocco (2015): 3.361 | Novel Basic Block of Multilevel Aparna Prayag International journal of Inverter using Reduced Number of Advances in Electrical 39 On-State Switches and Cascaded Engineering Circuit Topology Battery Operated Sine Wave Manshi International Journal for 4.87 40 Inverter Khandelwal Research Trends and Innovation On line Condition Monitoring Gajanan. C. IET Journal (Institute of 1.865 41 System for Submission and service Jaiswal Engineering and Technology) Transformer Improved Performance of Modular P. V. Kapoor International Journal Energy 1.07 42 Multilevel Converter for Induction Procedia , Motor Drive High Input Power Factor High S. H. Deshmukh IOSR Journal of Electrical and 43 frequency Push-pull DC/DC Electronics Engineering (IOSR- Converter JEEE), Low cost fabrication of polymer Suresh Institutions of Engineering and 0.854 44 substrate based piezoelectric micro Balpande Technology generator with PPE,IDE and ME Statistical Maximum Value B.M.Hardas International Journal of control 1.466 Distribution Approach for theory and applications (IJCTA) 45 Optimization of Peak to Average Power Ratio in Wireless Communication System Generation of Electricity using Archana Tiwari International Journal of 46 Peltier Module Electronics, Electrical and Computational System IJEECS A Fuzzy Controlled Approach to Prasad R. International Journal of 47 Anti-lock Braking Systems for Pande, Engineering Development and Vehicles Research 48 NFC Based Vehicular Involuntary Dipak Patil International Journal of 27 | P a g e
Communication System Advanced Research in Computer Science Clock Scheme for FPGA GouriMorankar Indian Journal of Science and Implementation of Globally Technology, 49 Asynchronous Locally Synchronous (GALS) Circuits Implementation of Speed Efficient Sharmik V. International Journal of Image Processing algorithm on Admane Innovative Research in 50 Multi-Processor System on Chip Advance Engineering (MPSoC) Design and FPGA Implementation Prof. Prasheel International Journal of 51 of 4x4 Vedic Multiplier using Thakre Engineering Research & Different Architectures Technology (IJERT)" Smart Railway Track System using Prof. Prasheel International Journal of RFID Thakre Engineering Technology 52 Science and Research (IJETSR )" Denoising of Digital Images using Prof. Bhumika International Journal of Consolidation of Edges and A. Neole Computer Applications 53 Separable Wavelet Transform
UWB Sensing Antenna, Prof. Chetan International Journal on 0.701 54 Reconfigurable Antenna based Waghmare Wireless Personal Cognitive Radio Test Bed communication BIST for Memory with Addres and Ajinkya R.Kapse International Journal of Syndrome Compression innovative Research in Electrical , Electronics, 55 Instrumentation and Control Engineering Publisher:TEJASS Publisher Indexing-Google Scholar Globally Asynchronous Locally Gouri Morankar IOSR Journal of VLSI and Signal Synchronous (GALS) Processing Microprogrammed Parallel FIR Publisher:International 56 Filter Organization of Scientific Research(IOSR) Indexing-Google Scholar Design and low cost fabrication of Suresh Sensors and Actuators A: green vibration energy harvester S.Balpande Physical , 57 Publisher :Elsevier Publications Indexing:SCI Statstical Maximum Value B.M.Hardas International Journal of Distribution Approach for Control Theory and 58 Optimization of Peak to Average Applications Power Ratio in Wireless Publisher:Serials Publications Communication System Indexing:SCOPUS ‘Technology and Language Dr.Monika Seth International Journsl of 59 Evolution’ Science Technology and Management Uprooted Literature Dr.VH Asudani Pune Research: An 60 International Journal in English Critical Analysis of Job satisfaction Prof. H. M. International Journal for IF: 4.396 61 in IT industry: A Review Shukla Scientific Research & IC value: 64.81 Development
28 | P a g e
Experimental Investigations of EDM A. D. Urade IJSRSET 62 Process Parameters for Tool Wear Rate Based on Orthogonal Array Design, Development and Analysis Shailesh B International Advanced of Umbrella Shape Solar Hot Water Yadav Research Journal in Science, 63 Device Engineering and Technology
Development of an approach based Prof. M. A. Elsevier Science Direct Journal: 64 on soft computing for text Tayal Computer Speech and summarization Language A Novel Search Method for Fractal Prof. P. J. International Journal of 65 Video Compression using Block Assudani Computer Applications, Matching Motion Estimation Group of Automorphisms R.G.Ghumde Acta Math. Univ. Comenianae preserving cosets of a central 66 characteristic subgroup and related results Understanding the role of Brand Dr. Rajesh International Research Journal Preference, in Repurchase Vaidya of Management Sociology & 67 Intention of a consumer with Humanities reference to FMCG Products Evaluation of the Factors K.D.V. Prasad, Pacific Business Review Influencing the Performance International, Volume 9 Issue Appraisal System with Reference to 9, 68 Agriculture Research Sector, Hyderabad –A Multinomial Logistic Regression Approach, Measurement of Technical and Dr. Archana International Journal of Non-Technical Skills of Engineering Srivastav Engineering Technology, 69 Graduates: An Empirical Management and Applied Investigation Sciences)IJETMAS, , Volume 5 Issue 5 An Exhaustive Survey on Security Kavita Kalambe International Journal of Impact Factor : Solutions in MANETS Computer Sciences and 2.638 70 Engineering
An Elaborative survey on Security SampadaApte International Journal of IMPACT Routing Protocol in Wireless Computer Application FACTOR: 3.12 71 Networks
Inception of Big Data with Hadoop Prof. Y. Pethe International Journal for 3.55 72 and Map Reduce Science and Advance Research In Technology Advanced Multicore Architecture Prof. P. International Journal for 3.55 73 Dandekar Science and Advance Research In Technology Implementation of Self Organizing Prof. S .Uparkar International Journal of (SJIF)4.542 Map uaing MATLAB Advance Research in 74 Engineering, Science & Technology Scalability of Data Mining Prof. S. Uparkar Internation Journal of (DIIF)2.65 Algorithms : A Case Study of Innovative Advancement in 75 Asteriod Dataset using Map Reduce Computer Science Concept
29 | P a g e
General Approach of Prediction of Yogita Wanjari International Journal for (SJIF) 5.969 Diabetes Mellitus using Top-K and Research in Applied Science & 76 MOPNAR Algorithm Engineering Technology (IJRASET) A Review on Prediction of Diabetes Yogita Wanjari International Journal of 3.577 Mellitus Disease Using Association Innovative Research in 77 Summarization Techniques Computer and Communication Engineering FEA investigation of a Human Eye Dr. V. V. Shukla Journal of Mechanical 1.23 MODEL subjected to Intra-Ocular Engineering and Applied 78 Pressure (IOP) and external Mechanics pressure “Comparison of Academic Scores of Dr. S Dogra International Journal of 79 Sportsmen and Non Sportsmen Engineering Sciences and Students of Engineering Colleges” Research Technology Music And Sports A psychophysical Dr. S Dogra International Journal of - 80 Effect Researches in Social Science & Information Studies NIR emissionandCe3þ–Nd3þ energy C.P.Joshi Journal of Luminescence 81 transferinLaCaAl3O7 phosphor preparedbycombustionsynthesis Tensile Properties of Natural Fiber R. A. Nafdey IJ for Science and Advance 82 Reinforced Polymer Composite- A Research Technology 2 (2016) Review 318-330
30 | P a g e
6.4 Faculty presentations in conferences
The faculty has presented over 125 papers in the conferences in India & abroad. Following are some of the significant presentations:
Conference presentations (Dean R&D Data) S No Paper Title Author(s) Conference Details [Name/date/Venue/Sponsors] NATIONAL CONFERENCES Design and Fabrication of Suresh 8th ISSS National Conference on Piezoelectric Energy Harvester for S.Balpande MEMS,SmartMaterials,Structures and 1 Self Powered e-Textile Based Systems Biomedical Systems Design and Analysis of Micro- Saraswati Pandey 8th ISSS National Conference on 2 Cantilever Sensor for Tumor MEMS,SmartMaterials,Structures and Detection Systems Copper Mesh Electrodes Based Manish Bhaiyya 2016 IEEE Students’Technology 3 Energy Harvester Symposium Human Values and Autocoscienza Dr.Monika Seth 2-Day National Conference on 4 Professional Ethics and Human Values Design And Development Of A Pellet Yeshwant M XII IPRoMM National Workshop on Mill Energized By Human Powered Sonkhaskar Industrial Problems on Machines & 5 Flywheel Motor (HPFM) Mechanisms: “Challenges in Manufacturing” Optimization of surface roughness Prof. Y. V. XII IPRoMM Industrial Problems on 6 with cryogenically treated Inserts in Deshpande Machines and Mechanisms turning of Inconel 718 using RSM. Formulation of Field Data based Prof. Himanshu XII IPRoMM Industrial Problems on model to corelate the performance Shukla Machines and Mechanisms 7 of manual stirrup making activity by using MATLAB Design And Development Of A Pellet Yeshwant M XII IPRoMM National Workshop on Mill Energized By Human Powered Sonkhaskar Industrial Problems on Machines & 8 Flywheel Motor (HPFM) Mechanisms: “Challenges in Manufacturing”, VNIT Nagpur Determination of Optimal Feature P.S. Deole XII IPRoMM National Workshop on Selection Method for Tool Condition Industrial Problems on Machines & 9 Monitoring in Boring Operation Mechanisms: “Challenges in using Acoustic emissions Manufacturing”, VNIT Nagpur New Repair and Rehabilitation of M. S. Balwani, National Conference on “Innovation in 10 Building Gourav Sachdeva Construction Technology for Sustainable Development” CYNOSURE-17
Seismic Response of Column with Gourav Sachdeva, National Conference on “Innovation in 11 Different Shapes Prashant D. Construction Technology for Sustainable Hiwase Development” CYNOSURE-17 Improvement In Lime Stabilized T. K. Rao 6th Indian Young Geotechnical Engineering Subgrade Using Geogrid For Conference 6IYGEC2017 12 Reduction Of Rut Depth & Heave In Flexible Pavement Critical Analysis of Online Auctioning Dr.Anup Ranade National Conference on Networking, 13 Technique used by major E- Cloud Computing, Analytics and Commerce Platforms Computing Technology (NCNAC -2017) Social Change in Sindhi Literature Dr. V H. Asudani Too day Seminar of SahityaAcademi on 14 Social Change 31 | P a g e
Critical Review of Hari Dilgir’s book Dr. V H. Asudani Birth Centenary Seminar of Hari Dilgir’s 15 “RoluAvas” 16 Changing Dynamics of Sindhi Poetry Dr. V H. Asudani Too day Seminar on Sindhi Literature 17 Patriotism in Sindhi Literature Dr. V H. Asudani Patriotism in Sindhi Leterature Applicability of Quality Circles for Prof. S.R.Kulkarni All India Quality Progress 2017’ 18 Solving farmers' problem in India organized on 17th and 18th June 2017 at Institution of Engineers Nagpur Chapter INTERNATIONAL CONFERENCES Santilli’s New Clean Fuels with C. P. 2016 Sustainable Industrial Processing 1 Magnecular Structure Pandhurnekar Summit and Exhibition, China
Expanded polystyrene (EPS) A H Padade GEO-Chicago 2006 2 geofoam unit cells with fly ash Numerical modeling of highway A. H. Padade Putrajaya International Built Environment 3 embankment using plasix 3D Technology and Engineering Conference (PIBEC 2006) Analysis of RCC beams with web Dr. R. N. Khapre Innovations in Science & Technology: opening through experimental, Opportunities and Challenges 4 computer simulation and analytical approach Firmware Upgradation of ARM7 P. R. Selokar International Conference on Signal 5 through communication Link (via Processing, Communication, Power and UART over CAN) Embedded Systems (SCOPES-2016) Implementation of OFDM based Dr.S.B. Pokle International Conference on Advanced 6 wireless Communication System on Trends In Engineering, Science & GNU-Radio Platform- An Overview Humanities (ICATESH-2016) Statistical Maximum Value Dr.S.B. Pokle International Conference on Intelligent Distribution Approach for Computing and Applications (ICICA 2016) 7 Optimization of Peak to Average Power Ratio in Wireless Communication System FPGA Implementation of a Novel Prof. Anish Goel 2nd International Conference on Frontiers 8 Technique for Selective Image of Signal Processing Encryption Median Based Pixel Selection for Prof. Anish Goel 6th International Conference on Image 9 Partial Image Encryption Processing Theory, Tools and Applications Comparative Study of Various Dr. R. D. Raut Intonational Conference on Could 10 Spectrum Sensing Techniques Computing and Computerisation CR based I –Voting System Dr. R. D. Raut International Conference on Sustainable 11 growth through Innovations in Management & Technology Sustainable growth through Dr. R. D. Raut International Conference 12 Innovations in Management & Technology “Ad – Hoc Network based smart –I Dr. R. D. Raut IEEE International conference 13 Routing system an application to cognitive radio system” on “Inter-neting of Things – IOT Dr. R. D. Raut international conference on Sustainable 14 Growth Through Innovations Energy Management of Rahul V. Chakole IEEE First International Conference on Supercapacitor with DC-DC Power Electronics, Intelligent Control and 15 Converter Energy Systems (ICPEICES 2016. Available in IEEE Xplore database Analytical and Comparative Study of Bhavika Shah IEEE First International Conference on 16 FHI-SPWM with SPWM Control Power Electronics, Intelligent Control and Technique Energy Systems (ICPEICES 2016. Available 32 | P a g e
in IEEE Xplore database
IEEE First International Conference Comparative IEEE First International Conference on on Power Electronics, Intelligent Analysis of Power Electronics Intelligent Control and Control and Energy Systems Classical Three- Energy Systems (ICPEICES 2016. Available 17 (ICPEICES 2016),DTU, New Delhi. Phase Multilevel in IEEE Xplore database Available in IEEE Xplore database (Five level) Inverter Topologies Solar Based Series Z-Source Inverter Rahul Adle IEEE First International Conference on for Induction Motor Drive With Soft Power Electronics Intelligent Control and 18 Starting Energy Systems (ICPEICES 2016. Available in IEEE Xplore database Cognitive Radio Based I-voting R. D. Raut International Conference on Sustainable System Growth Through Innovations in 19 Management and Technology (SGIMT- 2016) Adaptable Differential Relay using Prof. V. T. Barhate IEEE International Scientific Conference Fuzzy Logic Code in Digital Signal on Power and Electrical Engineering of 20 Controller for Transformer Riga Technical University (RTUCON) Protection Object and Character Recognition Priyanka Bawane International Conference on Processing of Using Spiking Neural Network Materials, Minerals and Energy, Ongole, Andhra Pradesh, India. 21 Materials Today Proceedings PMME2016 Publisher :Elsevier Publications Indexing:SCOPUS Automatic Trimap Generation for Vikas Gupta International Conference and Information 22 Image Matting Processing 2016 Power Efficient GALS Pipelined MAC GouriMorankar International Conference on Signal 23 Unit for FFT with Complex Numbers Processing,Communication,Power and Embedded Systems(SCOPES)-2016 Globally Asynchronous Locally GouriMorankar International Conference on 24 Synchronous (GALS)Pipelined Signed Computing,Analytics and Security Multiplier Trends(CAST-2016) A Review on Investigation and G.R. Maurya International Conference on Advanced Assessment of Path Loss Models in Material Technologies (ICAMT)-2016 25 Urban and Rural Environment Elsevier Materials Today: Proceedings Indexing:SCOPUS ‘Technology and Language Dr.Monika Seth 4th International Conference on Recent 26 Evolution’ Trends in Engineering Science and Management (ICRTESM-2016) Optimization of EDM process A. D. Urade 58 National Convention of Indian parameters for tool wear rate: Institution of Industrial Engineering & 27 Smart machining strategy for molds International Conference on Smart and dies Strategies for Digital World - Industrial Engineering Perspective Approaches for combining Dr. P. P. Tambe International conference on Operations operational decisions for and Supply Chain Management (ICOSCM) 28 maintenance and quality control using control chart: A review System Dynamic Methodology on Dr. P. P. Tambe International conference on Operations 29 Procurement Management of Food and Supply Chain Management (ICOSCM) & Hazardous Materials
33 | P a g e
Evaluation of Lot-Sizing decisions for Dr. P. P. Tambe International conference on Operations 30 Forecasted Demand in a Metal and Supply Chain Management (ICOSCM) Finishing Industry Analysis of Causes of Engine Dr. I. P. Keswani 58th National Convention of IIIE and Overheating Considering Cooling International Conference on Smart 31 System Using Pareto Principle and Strategies for Digital World (ICIE-2016) Method of Repairing Engine Block Cracked from the Bores Experimental Optimization of Prof. S. S. Pund 58th National Convention of IIIE and Process Parameters of Corrugation International Conference on Smart 32 Process Strategies for Digital World (ICIE-2016) Subject-Teacher Allotment Using OR Prof. S. S. Pund 58th National Convention of IIIE and Technique International Conference on Smart 33 Strategies for Digital World (ICIE-2016) Lean Production Implementation to Prof. S. S. Pund 58th National Convention of IIIE and evaluate Job Cost International Conference on Smart 34 Strategies for Digital World (ICIE-2016) Implementation of Lean Principles in Prof. S. S. Pund 58th National Convention of IIIE and a Mattress manufacturing Industry International Conference on Smart 35 Strategies for Digital World (ICIE-2016) Optimization of Production Prof. S. S. Pund 58th National Convention of IIIE and Inventory control System (PIC) and International Conference on Smart 36 its Simulation using Witness. Strategies for Digital World (ICIE-2016) Performance Optimization of Bus Prof. S. S. Pund 58th National Convention of IIIE and Route Using AHP International Conference on Smart 37 Strategies for Digital World (ICIE-2016) Productivity Improvement by Prof. S. S. Pund 58th National Convention of IIIE and Elimination of Unproductive International Conference on Smart 38 Activities through ‘MOST' Strategies for Digital World (ICIE-2016) Plant Layout Optimization Using Prof. S. S. Pund 58th National Convention of IIIE and Analytical Approach In Small Scale International Conference on Smart 39 Manufacturing Firm Strategies for Digital World (ICIE-2016) Capacity Planning Of Seat Assembly Dr. V. S. 58th National Convention of IIIE and In Passenger Bus Assembly Plant: A Deshpande International Conference on Smart 40 Case Study Strategies for Digital World (ICIE-2016) Development OfMaintennance Dr. V. S. 58th National Convention of IIIE and Strategy Of Power Transformer Deshpande International Conference on Smart 41 ThroughDissolved Gas Analysis (Dga) Strategies for Digital World (ICIE-2016) Of Transformer Oil Optimization of EDM process Dr. V. S. 58th National Convention of IIIE and parameters for tool wear rate : Deshpande International Conference on Smart 42 Smart machining strategy for molds Strategies for Digital World and dies (ICIE-2016) Simulation Model For Furniture Dr. P. P. Tambe 58th National Convention of IIIE and Industry Using Simio Software International Conference on Smart 43 Strategies for Digital World (ICIE-2016)
34 | P a g e
Improvement In Material Handling Dr. P. P. Tambe 58th National Convention of IIIE and System In A Micro Crystalline International Conference on Smart 44 Product Strategies for Digital World Manufacturing Industry: A Case (ICIE-2016) Study Application Of Method Engineering Dr. P. P. Tambe 58th National Convention of IIIE and In Cooler Manufacturing Industry International Conference on Smart 45 Strategies for Digital World (ICIE-2016) Quality Testing Of Fruits Using Dr. A. S. 58th National Convention of IIIE and Dielectric Sensing: Chatpalliwar International Conference on Smart 46 Strategies for Digital World (ICIE-2016) Design And Installation Of Solar Prof. T. A. 58th National Convention of IIIE and Power-Based Street Lighting System Madankar International Conference on Smart 47 For The Campus Of RCOEM, Nagpur. Strategies for Digital World (ICIE-2016) Design of a Solar PV System for Prof. T. A. 58th National Convention of IIIE and Industrial Engineering Department Madankar International Conference on Smart 48 of RCOEM, Strategies for Digital World Nagpur (ICIE-2016) Design and Development of Human Prof. H. M. Shukla 58th National Convention of IIIE and Powered Spray Pump for International Conference on Smart 49 Indian farmers: An Ergonomic Strategies for Digital World Approach (ICIE-2016) “Improvement in Material Handling Prof. Priya M. 58th National Convention of IIIE and System in a Micro Crystalline Khandekar International Conference on Smart 50 Product Manufacturing Industry: A Strategies for Digital World Case Study “ (ICIE-2016) Quality Testing of Fruits Using Dr. A S 58th National Convention of IIIE and Dielectric Sensing : A Review Chatapalliwar International Conference on Smart 51 Strategies for Digital World (ICIE-2016) Application Of Method Engineering Prof. P. M. 58th National Convention of IIIE and In Cooler Manufacturing Industry - A Khandekar International Conference on Smart 52 Case Study Strategies for Digital World (ICIE-2016) Critical Analysis of 2-Dimensional Dr. D. S. Adane IEEE International Conference on 53 Graphical Authentication Systems Computing, Analytics and Security Trends
An Asynchronous Algorithm for Prpf. N. A. Ansari 10th IEEE International Conference on providing Energy Efficient Coverage Advanced Networks and 54 and Connectivity in Wireless Sensor Telecommunications Systems (ANTS) Networks The Analytic Invariants of P. O. Bagde IC Quadruples of Orthogonal Unit 55 Vectors in Sphrically Symmetric Space - time V4 Effect of Suction and Discharge Line Prof. S. A. Patil International Advanced Research Journal 56 Cooling on Performance of VCRS in Science, Engineering and Technology
Silica nanowire: a potential Dr. Shilpa Kulkarni International Conference on Advances in 57 candidate for low cost industrial gas Biological Systems and Materials Science sensing in Nano World (ABSMSNW-2017) Spectral Conversion for Silicon Solar Prof. C. P. Joshi International Conference on Advances in 58 Cell using CaF2:Eu2+ and CaF2:Eu2+, Biological Systems and Materials Science Nd3+ phosphors in Nano World (ABSMSNW-2017) 35 | P a g e
Energy-Efficient Self-organization SumedhaSirsikar International Conference on Data 59 Wireless Sensor Network for Traffic Engineering and Communication Management in Smart Cities Technology Realization of Sequential Circuit SonalRajurkar, International Conference on Intelligent 60 using Finite State Machine Urvashi Kodwani Computing and Control Systems
Information Extraction from Kucheria 7th International Conference on Advances 61 Relational Database Using Speech in Science and Engineering and Recognition Technology 2017 A survey on Techniques for stock N.S.Puri International Conference on Innovations 62 market prediction using Machine & Development for future smart cities learning Detecting Deblurring characters Anup Choudhary, 8th International recognintion and Extraction from Prajwal Chawale, Conference number Plate Saurav Kumar, on Recent Innovations in 63 Vikas Singh, Science, Engineering, Vishal Bagadia Technology and Management A Survey on Different Techniques Payal kale International Conference on Intelligent 64 for Encrypted Cloud Data Computing and Control Systems (ICICCS 2017) Parallel Computation of Advance Vishal Sathawane International Conference on Recent 65 Encryption Standard Algorithm for Trends in Engineering Science and Performance Improvement Technology Health and Healing- Views of Father Dr. S Dogra Two days Interdisciplinary/ International 66 of Nation Conference on “Gandhism: Past, Present and Future” Use of Artificial Neural Network in S. U. Dhote International Conference on Emerging 67 Wind Response of Tall Buildings Technology in Structural Engineering(ETSE-2017) An Experimental Study On V. R. Harne, S. U. 3rd International Conference On 68 Behaviour of Steel Fibers reinforced Dhote “Advances In Steel, Power and concrete over conventional concrete Construction Technology Floating Columns: A Critical Gourav Sachdeva International Conference on Engineering 69 Approach Intended for Different and Technology (ICET-17) Locations Analysis and Design of RCC T-girder T. K. Rao International Conference on Emerging 70 Bridge under IRC Class AA and Class Technology in Structural A Loading Engineering(ETSE-2017) Analysis and design of pier for high Mr. Aditya International conference on recent 71 level bridge Chopade advances in materials, mechanical & civil engineering Significance of shear wall in multi- Mr. Rajat International conference on recent 72 storey structure with seismic Bongilwar advances in materials, mechanical & civil analysis engineering A parametric study of high risk Mr. Harshad International conference on recent structures with mass and stiffness Deshmukh advances in materials, mechanical & civil 73 irregularity subjected to seismic engineering action using STAAD.pro V8i Performance based evaluations of Ms. Kanchan Raut International conference on recent 74 elevated water tanks advances in materials, mechanical & civil engineering Analysis of an irregular RC Mr. Aakash Raut International conference on recent 75 multistoried building subjected to advances in materials, mechanical & civil dynamic loading engineering
36 | P a g e
Analysis and Design of RC Framed Mr. International conference on recent 76 building with and without shear wall SanketDautkhani advances in materials, mechanical & civil at different locations engineering Analysis and Design of composite Mr. KedarLambe International conference on recent 77 slab by varying deferent parameters advances in materials, mechanical & civil engineering Economical feasibility for design of Mr. Milind R. International conference on recent 78 gable frames with web tapered Jogekar advances in materials, mechanical & civil member in pre engineering building engineering Determination of load shearing ratio Ms. International conference on recent 79 of piled-raft foundation AnandbhushanTe advances in materials, mechanical & civil kade engineering Vedic Mathematics Sutras – A Prof. Prasheel International Conference on Recent 80 Review Thakre Trends in Engineering
Real time Vehical Tracking System Prof. Chetan International Conference on Advanced 81 Waghmare Trends in Engineering
DPD Monitor- Protector of 3 Phase Prof. Chetan International Conference on Advanced 82 Induction Motor Waghmare Trends in Engineering
Nine Switch Controlled Induction Chaitanya IEEE International Conference on Motor Drive with Unity and Leading jibhkate Electrical, Computer and Communication 83 Power factor Technology, organized by SVS College of Engineering Photovoltaic Based Series Z-Source Rahul Adle First international conference on Power Inverter fed Induction Motor Drive Engineering Computer and Control 84 with Improved Shoot Through ‘PECCON 2017’, organized by VIT Technique,” University Improved Performance of Modular Prof. P. V. Kapoor First international conference on Power Multilevel Converter for Induction Engineering Computer and Control 85 Motor Drive ‘PECCON 2017’, organized by VIT University DSSC: A Distributed Power Flow Sandeep First international conference on Power Controller Gaigowal Engineering Computer and Control 86 ‘PECCON 2017’, organized by VIT University, Photovoltaic Based LED Lighting U. B. Mujumdar First international conference on Power with maximum Power Point Tracking Engineering Computer and Control 87 ‘PECCON 2017’, organized by VIT University, A single Phase Seven Level Inverter P. A. Salodkar International Conference on Power & Topology for Photovoltaic Embedded Drive control (ICPEDC-2017), 88 Application,” in organized by Department of Electrical & Electronics Engineering, SSN College of Engineering. Closed Loop Control of BLDC Motor Yogesh International Conference on Electric Vehicle Mundhada Telecommunication, Power Analysis and 89 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research Voltage Sag Compensation using Ajay Kale International Conference on Dynamic Voltage Restorer” in Telecommunication, Power Analysis and 90 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research,
37 | P a g e
An Extinction Angle Control of Three Sakshi Shrivastava International Conference on Mechanical Phase Induction Motor Drive for & Production Engineering (ICMPE) in 91 High Power Motors association with Industrial Electronics & Electrical Engineering Forum SOGI Based PLL for Single Phase Grid Dharmendra International Conference on Synchronization Yadeo Telecommunication, Power Analysis and 92 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research Analysis of Inverters for Multidrive Utkarsha Sing International Conference on system Telecommunication, Power Analysis and 93 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research, Simulation and Study of Three Phase Himanshu International Conference on Power & Voltage Source Multilevel Inverter Pillewan Embedded Drive control (ICPEDC-2017), 94 with Reduced switch Count” in organized by Department of Electrical & Electronics Engineering, SSN College of Engineering, Simulation and Fabrication of Axial Pooja V awari International Conference on Flux Brushless DC Motor Drive Telecommunication, Power Analysis and 95 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research, Comparison of Multilevel Inverter Saikumar International Conference on Mechanical Suryavanshi & Production Engineering (ICMPE) in 96 association with Industrial Electronics & Electrical Engineering Forum, held at Comparison of Two Level & Three Aniket Bhivgade International Conference on Mechanical Level Five Phase Inverter & Production Engineering (ICMPE) in 97 association with Industrial Electronics & Electrical Engineering Forum Numerifcal Relay Based Transformer Vrushali Borikar International Conference on Mechanical Protection & Production Engineering (ICMPE) in 98 association with Industrial Electronics & Electrical Engineering Forum Energy Management System using Tarini Parmar International Conference on Mechanical Supercapacitor & Production Engineering (ICMPE) in 99 association with Industrial Electronics & Electrical Engineering Forum Solar powered Water Pumping Two Abhishek International Conference on Phase Induction Motor Junghare Telecommunication, Power Analysis and 100 Computing Techniques (ICTPAT-2017), organized by Bharat Institute of Higher education and Research, Inrush Current Analysis Using FFT Priyanka Patil International Conference on Mechanical For Transformer Protection & Production Engineering (ICMPE) in 101 association with Industrial Electronics & Electrical Engineering Forum HPWM Based Control Pulses Priyanka International Conference on Intelligent 102 Generation for Single Phase qZSI Kimmatkar Computing and Control Systems (ICICCS), using DSC organized by Vaigai College of Engineering Effects of Switching Frequency and T. G. Arora 12th IEEE Conference on Industrial Motor Speed on Common Mode Electronics & Applications ICIEA 2017, 103 Voltage, Common Mpode Current Siem Reap and Shaft Voltage in PWM Inverter- fed Induction Motors 38 | P a g e
Effect of Generator Reactive Power S. D. Naik 12th IEEE Conference on Industrial 104 Limit on Proximity to Voltage Electronics & Applications ICIEA 2017, Instability of Multibus Power System Siem Reap, Implementation of Large and S. C. Rangari Proc. IEEE International Conference on Medium Vectors SVPWM Technique Intelligent Computing and Control 105 in Five Phase Voltage Source Systems (ICICCS), Inverter Use of Solar Energy for Green Archana Talhar IEEE TENSYMP Spring Conference 2017, Building & Reduction in the Technology for Smart Cities 106 Electricity Bill of Residential Consumer Optimization of different Routing Kanchan Dhote 2nd IEEE International Conference on Techniques in Wireless Sensor 2017 Devices for Integrated Circuit 107 Network using Traffic Sensitive (DevIC), Active Queue Management Design and Analysis of 8.2 nH MEMS Satyam International Conference on Intelligent 108 Inductor for RF Integrated Filter Shrivastava Computing and Control Systems (ICICCS- Circuit 2017) A Review Paper on Design of an Isha Sahu International Conference on Innovative 109 Asynchronous Counter Using Novel Mechanism for Industry Reversible SG Gate Applications(ICIMIA 2017) Design & Simulation of fluid mixing Sakshi Rana 3rd International conference on emerging 110 in micro fluidic mixers Electronics
Artificial Intelligence Based Bhagyashri Sixth International Conference on Modelling of Biometric User Bhiogade Advances in Signal Processing and 111 Authentication System Using EEG Communication – SPC. 2017 Signals Measurement of Technical and Non- Dr. Archana International Conference on New Technical Skills of Engineering Srivastav Frontiers of Engineering, Science, 112 Graduates: An Empirical Investigation Balancing 2 P’s: Work Life Balance Dr. Ruchi Sao International Conference on Technology 113 Dynamics of Indian Married Working and Business Management, Dubai Women Speed optimization of AES algorithm Prof. 2nd International Conference for 114 with Hardware software co-design JitendraZalke Convergence in Technology (I2CT)
Rule Based Method for Automatic Ruchi Sahu 5th International Conference on Advanced 115 Medical Concept Extraction from Computing, Networking, and Informatics, Unstructured Clinical Text [ ICACNI - 2017 ] Spearphishing:Diagnosing Attack Prof. D N. Pande WiSPNET 2017 116 Paradigm
A Review on Hybrid Cloud Mohammad Aatif (ICECDS -2017)International Conference 117 Approach for Sharing Health Anwar on Energy, Communication, Data Information and Management Analytics and Soft Computing (ICECDS) Spearphishing:Diagnosing Attack Dr. P. S. Voditel WiSPNET 2017 118 Paradigm Scalability of Data Mining Prof. S. Uparkar Internation Conference on New Frontiers Algorithms : A Case Study of of Engineering, Science, Mangement and 119 Asteriod Dataset using Map Reduce Humanities (ICFESMH-2017) Concept 120 Short stories of shaukatshoro Dr. V H. Asudani Too Day Seminar on short Story
39 | P a g e
Investigation & Critical analysis of Prof. S. M. Indian Foundry Congress-2017 Titanium casting in Zircon sand mold Randiwe 121 for customized Implant manufacturing Use of coconut oil for Beam Split Prof. Sandeep International Conference on Frontiers in Photovoltaic Thermal system Joshi Engineering, Applied Sciences and (BSPVT) Technology, at National Institute of 122 Technology, Tiruchirapalli (NIT Trichy) . April 2017 Volume Issue No. NA Page No. Performance analysis of Prof. Sandeep International Conference on Trends and Photovoltaic Thermal system using Joshi Advanced Research in Green Energy 123 silicone oil spectrum filter Technologies, at VIT University, Vellore . March 2017 Volume Issue No. NA Page No. Robost Trajectory Tracking Control Dr. G.R.Nikhade 3rd International Conference of Robotics for an Omnidirectional Robot Society of India (ADVANCES IN ROBOTICS 124 AIR-2017) organized by Indian Institute of Technology, IIT Delhi during 28 June-2 July, 2017 Imitation learning in Industrial Dr. G.R.Nikhade 3rd International Conference of Robotics Robots: A kinematics based Society of India (ADVANCES IN ROBOTICS 125 Trajectory Generation Framework AIR-2017) organized by Indian Institute of Technology, IIT Delhi during 28 June-2 July, 2017
40 | P a g e
7.0 EVALUATION/EXAMINATION PATTERN
There has been total transformation in the examination/ evaluation pattern as compared to university system. More emphasis is given on continuous evaluation and teacher’s assessment. It is ensured that the entire syllabi are covered in the continuous assessment phase. More types of assessment tools are used as compared to university pattern. The choices in the question papers are reduced and many teachers now make the entire question paper compulsory. This ensures leveled platform for relative grading and students are made to study the entire syllabus for achieving higher grades. Question papers are set to test analytical ability, application orientation and memorizing ability of the students. Internationally accepted Relative grading based on normal distribution is adopted. CGPA score of the student reflects overall achievement in contrast to marking system. Degree is now awarded on the basis of overall performance of the students in all the semesters, rather than based on third and final year marks as in the university pattern. Following are the details of the evaluation/examination scheme adopted in autonomy: a. Examination reforms introduced during the period of autonomy: The “COE” the Controller of Examinations is appointed as per the Guidelines of UGC for autonomous colleges. The curriculum consists of credit course, audit course as recommended by the respective Board of Studies. Each credit course have a certain number of credits assigned to it depending upon the academic load of the course, which are assessed on the basis of weekly contact hours of theory lecture and field study if required. The courses, seminars and projects offered in a semester are being continuously assessed and evaluated to judge the performance of a student. Continuous evaluation process is introduced in the scheme such as test 1, test 2, assessment 1 and assessment 2 at departmental level. The “DEC” the Departmental Examination Committee is responsible for such evaluation. The “Grade Moderation Committee” is also being introduced in the scheme and the committee appointed by the Academic Council to moderate grades awarded by the examiner, if required. A student shall have to complete all the requirements for the award of the degree within such period as may be specified in the regulations, including those credits earned at such other institutions as have been recognized by the Institute for this purpose.
41 | P a g e
The curriculum for award of degree in various PG programmes is designed to have credits as under: MBA:180-220 credits. The overall topper(s) amongst all branches shall not be declared, however on the basis of CGPA topper may be declared as per norms. b. Question paper setting for final examinations [Internal/ External / Combined]: Combined c. Evaluation (completely internal / completely external / partly external and partly internal) d. Criteria for passing and classification: Student must secure a passing grade in all the credit courses and a ‘SF’ grade in all the audit courses offered by the Programme as per the Scheme of Examination of the Programme Students should opt and passed all the prescribed courses including seminar/ open defense and projects under the general institutional and departmental requirements. Students who fail to obtain the minimum specified CGPA required for the award of degree as per the norms, he/she can take additional courses or repeat the courses mentioned in program till the minimum CGPA is attained, subject to maximum duration of program may be extended at the most by one semester for genuine cases and unavoidable circumstances on the recommendations of the BOS through Academic Council for approval to the Board. e. Grading system adopted and the method of awarding grades: For every course taken by a student he/she is assigned a grade based on his/her combined performance in all components of evaluation scheme of a course/practical. The grade indicates a qualitative assessment of the student’s performance and is associated with equivalent number called a grade point. Following are the general guidelines for the award of grades: a) In general standard relative grading system will be followed. b) In case of elective subject if the no. of students offering a given elective is less than 25, the grades will be awarded as per absolute system. c) For each student, evaluation in different components of a course shall be done in absolute marks considering the weightage in scheme. d) The marks of various components shall be added to get total marks secured on a 100- points scale. The rounding off shall be done on the higher side. e) The provisional grades shall be awarded by the Examination Committee. The grades shall be finalized within fifteen working days after the End Semester Examination. f) The grades so awarded shall be moderated by a Grade Moderation committee for that semester of the department within next three working days. This committee will 42 | P a g e
finalize the grades and display a copy of the grades awarded on the Notice board of the Department. All the final grades shall be communicated to the Controller of Examination within three working days from the date of display of grades. g) The procedures for evaluation and award of grades for project, training, seminar and group discussion shall be decided by the respective Departmental Faculty Board. h) In case of audit courses the students would be awarded grades as follows i. Satisfactory ii. Unsatisfactory The grades shall be awarded by the course coordinators and communicated to the controller of examinations. The course coordinator shall decide and declare the mode of evaluation for the audit courses within the date prescribed by the Dean Academics.
Relative Grading System is adopted to assign grades to the UG students. The grading System is as follows.
f. Constitution and function of qualifying board to declare the results: Any specific norms in respect of examination, criterion of passing, results, valuation, grading, discipline, award of degree, attendance is prepared by the respective departmental faculty board, approved by BOS and Academic Council and examination committee.
g. Criteria adopted for moderation: Grade moderation of courses is carried out in department and approved by COE Office. As per the standard guide line. The Grade Moderation Committee for the programmes is appointed semester wise by the Chairman, BOS. This committee is responsible for adherence to the guidelines for the award of grades and includes all the concerned Course Coordinators. The Chairman, Grade Moderation Committee is responsible for the display of grades in the department and for forwarding the final grades to the COE.
h. Provision for improvement: There is a provision for improvement and the result is considered as best of the two.
Makeup Examination is conducted after every regular End Semester Examination.
43 | P a g e
i. A combination of one internal and one external examiner is finalized for practical examinations based on the list of externals approved by Controller of Examination for final project evaluation. j. Credit system has been introduced: The Institute follows a credit based semester system for its academic programmes. A student is required to earn all the credits through various academic courses of a curriculum as provided in the regulations and scheme.
Question Paper Patternunder Autonomy: one of the major areas of remarkable difference between the university pattern and autonomous pattern is the nature of question paper during the teacher’s assessment, continuous assessment and end semester examination.Question papers and other method of evaluation are adopted keeping in mind various course objectives defined in the curriculum.
Teacher’s Assessment: the course teacher has complete freedom for deciding the methodology for 10% of the evaluation. Whether the attendance marks are to be granted is left to the teacher. The evaluation methods are objective tests/ surprise tests/ open book tests/ assignments/live case studies/ other as found suitable by the teacher.
Continuous evaluation: A 30 % component is evaluated through three tests of 15% weightage (best of two). Each test is based on 1/3rd of the syllabus so that complete syllabus is covered in this component. No absentee/medical/ improvement test is conducted. More & more attempt is being made to reduce the choice so as to create uniform platform for proper evaluation & grading. Many of the teachers set the paper without any choice. The attempt is made to set the question paper with varying difficulty level i.e. from easy to very difficult.
End Semester exam: This exam is conducted for balance 60% component of evaluation. It is based on 100% of the syllabus. This also covers range of the questions with varying difficulty level with remarkably less choice or no choice.
44 | P a g e
8.0 RESULTS ANALYSIS
It is a regular practice to analyze the results of the examination to assess the quality of the evaluation & grading process. The result analysis for the session 2016-17 is presented as under:
8.1 Percentage number of students in the stipulated CGPA ranges (Programme wise & Year wise) for UG Engineering: The following tables provide the percentage number of students in the stipulated CGPA ranges. The data is provided at the end of first year, second year, third year& final year.
UG Percent number of students with CGPA Session: Sem II (First Year) <2016- 17> <5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Gr-1 11.82 19.32 35.22 24.55 9.09 Gr-2 13.68 22.88 38.06 18.91 6.47 Average 12.75 21.1 36.64 21.73 7.78
UG Percent number of students with CGPA Session: <2016-17> Sem IV (Second Year) <5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Civil 5.13 29.49 41.67 17.31 6.41
Industrial 2.53 34.18 39.24 18.99 5.06
Mechanical 0.00 9.52 41.27 36.51 12.70 Electrical 3.95 25 42.1 21.0 6.6 Electronics Shift-1 14.19 26.45 34.19 19.35 5.81 Electronics Shift-2 17.33 26.67 42.67 10.67 2.67 EDT - 19.44 33.33 16.67 11.11 EC 10.81 16.89 38.51 26.35 7.43
CSE 5.37 19.46 34.90 24.83 15.44 IT 2.59 24.67 48.05 16.88 7.79 Average 6.88 23.18 39.59 20.86 8.10
45 | P a g e
UG Percent number of students with CGPA
Session: <2016-17> Sem VI (Third Year)
<5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Civil 2.59 32.26 39.35 21.93 3.87
Industrial 1.25 25 58.75 12.5 2.5
Mechanical 0.00 6.45 51.61 32.26 9.68 Electrical 0 24.7 39.7 24.7 9.6 Electronics Shift-1 10.42 20.14 41.67 22.92 4.86 Electronics Shift-2 10.29 26.47 44.12 19.12 0.00 EDT 0 19.44 27.78 36.11 0 EC 6.00 20.00 44.00 21.33 8.67
CSE 5.13 17.95 35.26 32.69 8.97 IT 6.49 19.48 44.15 27.27 2.59 Average 4.22 21.19 42.64 25.08 5.07
UG Percent number of students with CGPA
Session: <2016-17> Sem VIII (Final Year)
<5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Civil 0.67 28.19 42.95 24.16 4.03
Industrial 1.23 19.75 54.32 23.46 1.23
Mechanical 0.0 17.81 41.10 34.25 6.85 Electrical 6.33 20.25 36.71 24.05 12.66 Electronics Shift-1 4.23 21.83 50.00 17.61 6.34 Electronics Shift-2 5.00 23.33 45.00 26.67 0.00 EDT 0 22.85 48.57 20 5.71 EC 4.17 22.22 40.97 23.61 9.03
CSE 0.68 18.37 40.82 29.93 10.20 IT 2.7 28.37 43.24 20.27 5.4 Average 2.50 22.30 44.37 24.40 6.15
8.2 Percentage number of students in the stipulated CGPA ranges (Programme wise & Year wise) for PG Engineering/ MBA/ MCA
46 | P a g e
PG Engg Percent number of students with CGPA Session: <2016-17> Sem II (First Year) <5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Structural Engg 0.00 0.11 0.33 0.39 0.17 Industrial Engg. 0.00 0.01 0.03 0.03 0.00 Geotech 0.00 0.27 0.33 0.33 0.07 Heat Power Engg 5.88 5.88 47.06 29.41 11.76 PEPS 0.00 0.25 0.56 0.19 0.00 VLSI 0.00 21.74 43.48 26.09 8.70 CSE 0.00 13.04 56.52 17.40 13.04 Average 0.84 5.90 21.19 10.55 4.82
Session: <2016-17> Sem IV (Final Year) <5.00 ≥5.00 ≥6.75 ≥8.00 >9.00 <6.75 <8 <9.00 Structural Engg 0.00 0.00 0.11 0.78 0.11 Industrial Engg. 0.00 0.00 2.00 7.00 0.00 Geotech 0.07 0.20 0.27 0.47 0.00 Heat Power Engg 0.00 0.00 38.89 55.55 5.55 PEPS 0.00 0.00 0.00 0.07 0.93 VLSI 10.00 5.00 25.00 50.00 10.00 CSE 11.11 5.55 50.00 27.78 5.55 Average 3.03 1.54 16.61 20.24 3.16
PG Engg Percent number of students with CGPA Session: <2016-17> Sem V
Geotech 0 % 50 % 16.67 % 33.33 % 0 %
PG Percent number of students with CGPA Session: <2016-17> ≥5.00 ≥6.75 ≥8.00 MBA <5.00 >9.00 <6.75 <8 <9.00 SEM-I (Shift-1) 6.34 19.04 49.20 19.04 6.34 SEM-I (Shift-2) 5.00 19.00 33.33 21.66 8.33 SEM-II (Shift-1) 10.52 22.80 28.07 33.33 5.26 SEM-II (Shift-2) 20.37 31.48 29.62 18.51 0 SEM-III (Shift-1)) 13.33 23.80 33.33 23.80 5.71 SEM-III (Shift-2) ≥5.00 ≥6.75 ≥8.00 MBA (Integrated) <5.00 >9.00 <6.75 <8 <9.00 SEM-I 33.89 18.64 16.94 22.03 8.47 SEM-II 40.67 16.94 16.94 18.64 6.77 SEM-III 5.88 47.05 29.41 15.68 7.84 SEM-IV 11.32 41.50 26.41 13.20 7.54 SEM-V 20.75 28.30 26.41 15.09 9.43 SEM-VI 3.77 49.05 22.64 13.20 11.32
47 | P a g e
PG Percent number of students with CGPA Session: <2016-17> ≥5.00 ≥6.75 ≥8.00
Sem III 0.00 20.69 49.43 21.84 8.05
Sem V 0.00 18.18 56.36 18.18 7.27
Sem II 10.59 17.65 42.35 25.88 3.53
Sem IV 2.35 20.00 54.12 14.12 9.41
Sem VI 0.00 10.91 61.82 20.00 7.27
8.3 Grade distribution at course level: It is also worthwhile to understand how the grade points are distributed at the subject level. The following tables the average percentage of students earning the grades, semester wise. The average is taken for all the theory subjects in that semester.
8.3.1 Mechanical Engineering Department
Mechanical UG AA AB BB BC CC CD FF 3 Sem 12.98 22.12 24.20 18.91 12.34 5.61 3.85
4 Sem 6.57 15.87 23.72 25.16 15.06 6.25 7.37
5 Sem 9.59 16.29 28.31 23.90 12.63 6.54 2.74
6 Sem 10.74 21.83 28.70 22.01 8.80 5.28 2.64
7 Sem 10.28 19.44 27.64 22.50 12.50 4.03 3.61
8 Sem 9.72 18.75 26.39 22.50 12.78 6.11 3.75
Average Percentage 9.98 19.05 26.49 22.50 12.35 5.64 3.99
48 | P a g e
8.3.2Electronics Department
EN UG Shift-1 AA AB BB BC CC CD FF 3 Sem 4 19 28 17 2 0 30
4 Sem 6 19 26 22 0 0 27
5 Sem 4 22 34 17 1 0 22
6 Sem 5 23 33 20 1 0 18
7 Sem 7 18 41 17 1 0 16
8 Sem 6 18 43 21 1 0 11
Average Percentage 5.33 19.83 34.14 19 1 0 20.83
EN UG Shift-2 AA AB BB BC CC CD FF 3 Sem 3 11 27 24 0 0 36
4 Sem 2 10 33 20 4 2 29
5 Sem 0 22 30 18 1 0 29
6 Sem 0 19 32 21 1 0 27
7 Sem 3 26 32 12 0 0 27
8 Sem 0 27 35 22 0 0 16
Average Percentage 1.33 19.17 31.5 19.5 1 0.33 27.33
49 | P a g e
8.3.3Electronics Design Technology Department
EDT UG AA AB BB BC CC CD FF 3 Sem 8.33 19.4 27.7 11.11 2.77 - 30.55
4 Sem 11.11 16.66 33.33 11.11 2.77 5.556 19.44
5 Sem 13.57 31.57 21.05 13.15 2.631 - 18.42
6 Sem 2.63 28.94 28.94 18.43 - 21.05
7 Sem 11.42 17.14 40 17.14 - - 14.28
8 Sem 17.14 25.71 42.86 8.57 2.86 - 2.85
Average Percentage 10.7 23.23 32.31 13.25 1.83 0.92 17.76
50 | P a g e
8.3.4Industrial Engineering
IND UG AA AB BB BC CC CD FF 3 Sem 8.01 14.05 26.31 25.33 14.87 8.17 2.94
4 Sem 10.13 19.71 24.05 20.43 16.27 7.23 0.54
5 Sem 6.75 8.44 14.91 22.78 15.33 7.31 1.41
6 Sem 11.25 18.21 26.79 22.86 12.86 6.25 0.89
7 Sem 9.49 14.40 26.42 27.22 13.77 5.38 0.47
8 Sem 12.19 17.15 20.45 21.90 14.26 8.68 0.21
Average Percentage 5.58 12.94 22.21 28.21 16.71 7.79 6.43
8.3.5M.Tech Structures
M Tech STRUCTURES AA AB BB BC CC FF 2016-17 1 Sem 13.89 25.39 33.33 15.28 8.33 1.39 2 Sem 6.94 23.61 36.11 20.14 9.72 2.08 3 Sem 14.44 41.11 31.11 12.22 1.11 0.00 Average percentage 11.76 30.14 33.52 15.88 6.39 1.16
51 | P a g e
8.3.6M.Tech Heat Power Engineering
M tech Heat Power AA AB BB BC CC FF Engineering 1 Sem 10.00 23.33 31.67 15.00 11.67 -
2 Sem 7.86 21.43 28.57 20.00 12.86 -
3 Sem 2.78 25.00 47.22 23.61 1.39 -
4 Sem 61.11 33.33 5.56 0.00 0.00 -
Average percentage 20.44 25.77 28.26 14.65 6.48 -
8.3.7M.Tech VLSI Engineering
M tech VLSI AA AB BB BC CC FF 1 Sem 17 21 27 4 0 21 2 Sem 9 35 30 9 0 17 3 Sem 0 29 33 19 0 19 Average percentage 8.66 28.33 30 10 0 19
52 | P a g e
8.3.8MBA
MBA Shift1 AA AB BB BC CC FF 1 Sem 8.2 18.6 27.3 27.5 18.3 9.38 2 Sem 8.03 15.90 26.32 24.44 15.56 6.25 3 Sem 8.4 15.4 28.0 27.5 18.4 8.77 Average percentage 8.21 16.63 27.2 26.48 17.42 8.13
MBA Shift2 AA AB BB BC CC FF 1 Sem 8.2 18.6 27.3 27.5 18.3 9.38 2 Sem 4.02 7.65 24.55 30.99 21.93 10.45 3 Sem 8.4 15.4 28.0 27.5 18.4 8.77 Average percentage 6.81 12.85 26.11 88.19 20.57 9.63
53 | P a g e
MBA (Integrated) AA AB BB BC CC CD FF
1 Sem 5.73 11.83 19.71 20.43 15.05 6.09 21.18
2 Sem 21.45 10.58 14.76 17.55 10.03 6.69 18.94
3 Sem 6.60 10.76 20.49 24.31 14.24 5.90 5.88
4 Sem 23.79 10.00 20.00 22.41 12.76 8.62 18.08
5 Sem 6.97 10.45 18.12 23.34 15.68 6.97 9.75
6 Sem 6.36 14.83 27.12 30.08 13.98 7.63 10.94
Average 11.81 11.40 20.03 23.02 13.62 6.98 14.12 percentage
8.3.9MCA
MCA AA AB BB BC CC FF
1 Sem 7.41 13.92 28.61 27.08 17.24 4.98
2 Sem 6.80 13.86 27.19 28.10 16.21 3.66
3 Sem 8.19 13.36 24.14 26.44 20.69 4.89
4 Sem 6.27 12.16 22.35 28.10 15.82 3.53
5 Sem 3.18 5.68 12.61 11.82 7.61 1.36
6 Sem 3.64 25.45 61.82 3.64 3.64 1.82
Average percent 5.92 14.07 29.45 20.86 13.54 3.37
54 | P a g e
8.3.10First Year
First Year AA AB BB BC CC CD FF
Average percent 8.40 13.58 30.53 26.88 13.07 4.60 2.49
8.3.11 CSE Shift I
CSE UG Shift I AA AB BB BC CC CD FF
3 Sem 11.69 14.81 23.12 20.78 13.77 9.87 2.08
4 Sem 12.73 18.96 18.44 18.44 15.06 5.71 7.01
5 Sem 10.37 15.31 21.73 25.43 14.07 6.17 2.22
6 Sem 3.83 5.83 8.25 7.67 4.75 1.50 0.50
7 Sem 4.58 9.17 15.83 17.29 10.00 5.00 2.29
8 Sem 8.42 13.00 12.64 10.26 7.14 4.95 0.00
Average % 8.60 12.85 16.67 16.64 10.80 5.53 2.35
55 | P a g e
CSE UG Shift II AA AB BB BC CC CD FF
3 Sem 6.39 11.67 17.78 31.39 18.89 10.28 3.61
4 Sem 10.28 13.33 20.83 27.50 15.83 7.22 4.72
5 Sem 8.95 13.68 18.95 25.26 14.47 6.84 4.47
6 Sem 2.96 4.85 5.84 7.32 3.54 2.80 0.82
7 Sem 6.13 12.99 14.46 16.42 12.01 2.94 1.23
8 Sem 7.04 12.01 13.87 10.97 8.07 3.52 0.62
Average % 6.96 11.42 15.29 19.81 12.14 5.60 2.58
CSE PG AA AB BB BC CC CD FF
1 Sem 12.17 17.39 30.43 28.7 11.3 0 0
2 Sem 8.7 12.17 36.52 29.57 9.57 0 5.8
3 Sem 6.25 14.58 31.25 25 12.5 0 14.58
4 Sem 12.5 43.75 37.5 6.25 0 0 0
Average % 9.91 21.97 33.93 22.38 8.34 0.00 5.10
56 | P a g e
8.3.12 Civil Engineering
Civil UG AA AB BB BC CC CD FF
3 Sem 9.4 15.4 35.2 41.6 17.8 12 14.34
4 Sem 12 19.2 34.4 40.6 20.2 9.8 10.051
5 Sem 8.83 19.5 39.5 40.66 18.16 12.5 9.53
6 Sem 3.5 6.29 12.21 14.71 7.07 4.14 6.86
7 Sem 9.5 14.33 22.33 34 19 12.16 6.75
8 Sem 4.07 6.78 12.42 14.28 8.43 4.64 3.42
Average % 7.88 13.58 26.01 30.97 15.10 9.21 8.49
57 | P a g e
8.3.13 Electronics and Communication Engineering
EC UG AA AB BB BC CC CD FF
3 Sem 9.24 15.33 23.73 25.04 13.79 6.01 2.47
4 Sem 8.61 16.60 26.70 22.20 13.80 4.90 6.70
5 Sem 8.60 15.27 24.54 26.96 13.14 5.41 6.09
6 Sem 9.10 17.62 29.33 20.52 12.97 5.13 4.84
7 Sem 8.19 14.07 27.52 25.56 14.51 5.97 4.19
8 Sem 8.64 21.54 27.44 24.80 10.87 4.67 1.73
Average % 8.73 16.74 26.54 24.18 13.18 5.35 4.33
8.3.14 Information Technology
IT UG AA AB BB BC CC CD FF
3 Sem 7.7 11.9 20.6 18.4 10.3 5.3 2.6
4 Sem 6.6 13.1 20.0 18.0 10.3 6.6 2.1
5 Sem 5.9 12.4 19.0 23.0 8.0 4.0 4.0
6 Sem 6.2 12.2 22.0 18.3 10.0 4.0 2.7
7 Sem 6.1 8.1 16.4 19.4 13.9 4.3 3.4
8 Sem 7.8 12.3 16.8 18.5 10.8 4.3 1.3
Average % 6.7 11.7 19.1 19.3 10.5 4.7 2.7
58 | P a g e
8.3.15 Electrical Engineering
IT UG AA AB BB BC CC CD FF
3 Sem 8.95 12.11 18.42 26.32 14.74 6.31 9.93
4 Sem 9.54 15.52 23.68 23.5 14.45 5.73 7.65
5 Sem 12.3 13.5 23.6 22.7 11.9 6.7 5.3
6 Sem 10.71 17.74 23.94 25.36 12.96 5.09 4.22
7 Sem 9.37 14.44 16.51 22.53 13.17 10.64 5.31
8 Sem 10.02 15.34 21.94 19.13 16.11 13.4 3.22
Average % 10.15 14.78 21.35 23.26 13.89 7.98 5.94
59 | P a g e
8.3.16 M.Tech PEPS
PEPS PG AA AB BB BC CC CD FF
1 Sem 12 12 33.33 34.67 14.67 9.33 12
2 Sem 15 13.33 30 26.67 13.33 21.67 15
3 Sem 0 28.88 22.22 11.11 24.44 13.33 0
4 Sem 26.67 66.67 6.67 0 0 0 26.67
Average % 13.41 30.22 23.05 18.11 13.11 11.08 13.41
8.4Number of Ph.D.s produced during the academic session Following table shows the number of PhDs registered & completed during 2016-17.
Department Registered Completed Civil Nil 01 Mechanical 01 04 Electrical Nil 02 Electronics Nil 03 EC 02 03 CSE 4 Nil Chemistry Nil Nil MBA 01 01 MCA 1 Nil
8.5. Online feedback system: Online Feedback system is developed for taking Students’ feedback. The Feedback is taken twice in a semester as per the Academic Calendar. The feedback is analyzed at the departmental level with each faculty member and areas of improvement are discussed. The Principal and Dean (Academics) discuss the feedback of each of the department with the respective Heads and selected faculty members. Corrective actions are taken thereafter.
60 | P a g e
9.0 Library Electronic subscriptions:
The institution has one of the well-equipped library with the volume and titles exceeding the requirement of statutory bodies. It also has modern facilities including e-resources as under:
Engineering Total Annual
SR. Subscription in Publisher E - Content NO. Indian Currency 174 IEEE journals, magazines & transactions, 26 IET
IEEE IEL Online Journals & Magazines, 20+IET conference titles, 1. 32,27,182.00 Growth Plan proceedings from over 1400 IEEE and IET annual
conferences. ASME e-journals Package 2. ASME (27-e-journals) 2,27,498.00 (Backfile Access since 2000) ASCE e-journals Package 3. ASCE (35-e-journals) 2,73,352.00 (Back file Access since – 1983)
37,28,032.00
Management
Business Source Elite– e – journals 4. EBSCO 3,20,902.00 Collection
Total 40,48,934.00
B
DELNET Database Packages 11,500.00
Total 40,60,434.00
61 | P a g e
10.0 Major Equipment in Labs
The institute encourages the department to procure the equipment based on the latest technology, for the benefit of the students. Following is the list of major equipment:
Location / Function / Use / S.No. Major Equipment Cost Laboratory Civil Engg Rockwell Hardness Testing machine (with Strength of materials lab - 1 1,47,656 all accessories) Structural Analysis Lab Testing Of Materials Environmental Engg. Lab - To Spectrophotometer UV VIS Model 1800 5,06,250 measure the percent 2 Make Shimadzu transmittance or the absorbance of a solution Geotechnical Engineering Lab - 3 Automatic Soil Compaction Machine 1,40,000 Soil Strength Testing & Analysis Geotechnical Engineering Lab- 4 Hydraulic Extruder 1,08,230 Soil Strength Testing & Analysis Strength of materials lab - 5 Torsion Testing machine 2,55,942 Testing Of Materials Transportation Engineering 6 CBR test apparatus 1,45,911 laboratory, for testing of highway subgrade material Surveying laboratory. For 7 Total Station 2.36.250 modern surveying technique Industrial Engineering S No Name of Equipment Cost Location, Function / Use 1 Audiometer 63563 Ergonomics MIR Minispir, USB Based Spirometer+ 2 65000 Ergonomics Mouth Pieces 3 Computerised Spiromenter 90000 Ergonomics 4 Advanced Expirograph 95000 Ergonomics Instrumentation & Metrology 6 Profile projector 57178 Lab Instrumentation & Metrology 7 Auto collimator 62214 Lab Instrumentation & Metrology 8 Electromagnetic flow metre 68850 Lab Instrumentation & Metrology 9 Angle Dekkor 74812 Lab Instrumentation & Metrology 10 Tool maker s microscope 177550 Lab Instrumentation & Metrology 11 Coordinate Measuring Machine 12,60000 Lab Software (Technomatix Manufacturing 12 420000 M. Tech Lab Academic Bundle) 13 Witness 2006 168896 Operations Research 14 Witness Upgrade 2008 120000 Operations Research 15 Simul8 86863 Operations Research HMT-T70 Lathe CNC 16 334077 Automation Lab (Trainer) 17 XL Mill CNC 875000.00 Automation Lab 18 Milling M/C Sunrise USG Table 1050 x 250 56,180.00 Mechanical Demonstration Lab
62 | P a g e
mm 19 Centre Lathe - Chetak - M 6½' Bed 88,717.00 AutoCAD Lab 20 Lathe M/C - HMT - LTM - 20/1500 175,315.51 Workshop 21 Capston Lathe - Auto Turret Feed PRITAM 246,131.00 Workshop 22 Radial Drill M/C HMT RM-61 291,068.38 Workshop 23 Shaping M/C 24" Stroke Accurate 300,000.00 Workshop 24 Tool Cutter Grinder HMT - GTC - 28 395,995.02 Workshop 25 C - 400 x 250 Series EDM M/C 401,375.00 Workshop 26 Milling M/C HMT - FN - 24 592,463.00 Workshop 27 Universal Wood working M/C 75000.00 Workshop 28 SPSS BASE PACK , Educational Pack- Rs 150000.00 Computer Lab Mechanical Engg 1 Solar radiation pyrometer 81,753/- RES/Solar Laboratory Solar photovoltaic training and research 2 1,84,537/- RES/Solar Laboratory system Solar thermal training and research 3 2,62,237/- RES/Solar Laboratory system
Electrical Engineering Phase Shifting Transformer (Oder in 2014- Switchgear & Protection Lab / 1 81281.00 15 & Received in 2016-17) UG Practical EDU All of VSAT,TSAT,SSAT (plus PSAT) 5 2 552039.00 Research lab / PG practical license user with CD 3 HV probe model no P5200A (Qty:3) 277136.00 Research lab /PG practical 4 Clamp Sensor (5amp AC) 48182.00 Project lab / UG Practical PMSM control module with controller, 5 software, rectifier, inverter (Oder in 2016- 355128.00 Research lab /PG practical 17 & Received in 2016-17) DC motor speed controller with three 6 phase SCR bridge (Oder in 2016-17 & 118188.00 Research lab /PG practical Received in 2016-17) Digital RPM controller dsPIC controller Research lab /PG practical 7 dsPICC30F4011 (Oder in 2016-17 & 41716.00 Received in 2016-17) Electronics Engg 1 XILINX Vivado (25 users) 137474.00 Digital System Design Lab Electronic Measurement and 2 Lab Measurement setup 53403.00 Instrumentation CISCO 1921 Modular Router with 3 107630.00 Computer Communication Lab Accessories Microwave Testbench Klystron based X 4 60364.00 Microwave Engineering band 5 Radar Trainer 84350.00 6 Wave Propagation Trainer 64319.00 7 COMSOL Multiphysics 319200.00 Research Lab Electronics & Communication Computer : Acer Veriton M200, 4th Gen 3,14,826/- 1. CC-SP LAB Core i3, 4GB DDR3 RAM, 500GB (11 Nos) Computer : Acer Veriton M200, 4th Gen 57143/- 2. EDC LAB Core i3, 4GB DDR3 RAM, 500GB (02 Nos) Computer : Acer Veriton M200, 4th Gen 85714/- 3. ESD-PRJ LAB Core i3, 4GB DDR3 RAM, 500GB (03 Nos) Computer : Acer Veriton M200, 4th Gen 114286/- 4. Microprocessor & W/S LAB Core i3, 4GB DDR3 RAM, 500GB (04 Nos)
63 | P a g e
Computer : Acer Veriton M200, 4th Gen 85715/- 5. UHF-DLD LAB Core i3, 4GB DDR3 RAM, 500GB (03 Nos) 6. Doppler RADAR Trainer kit 49,729/- UHF-DLD LAB 57750/- 7. Analog Cum Digital Lab UHF-DLD LAB (05 Nos) Computer Science & Engg Netsim: Network Simulator (Academic 1 3,57,750=00 Computer Networks Lab version 9.1) Accer core i3-4160 ,4th generation System Programming & motherboard /H81 HD Graphics 4400/ 4 7,50,000=00 2 Database Lab,Programming GB DDR3 RAM 1333 Mhz /500 GB SATA (25 Nos) Language & Software Engg. Lab HDD costing each Rs.30000/- Dell Vostro 3669 Desktop, Dell 18.5" 3,43,000=00 System Programming & 3 Monitor costing each Rs. 34,300/- (10 Nos) Database Lab Information Technology Rs 1. Computers ( Qty 73) Network and Project Lab 23,27,144/- 2. Graphics Server ( Qty 03) Rs 2,29,463/- Network and Project Lab 3. HP Server ( Qty 01) Rs 64,575/- Network and Project Lab 4. LCD Projector ( NEC ) ( Qty 01) Rs 54,560/- Network and Project Lab 5. Online UPS Numeric 1000 ( Qty 01) Rs1,60,000/- Network and Project Lab 6. Computers ( Qty 62) Rs 17,11,855 Software and Database Lab 7. LCD Projector NEC (Qty 01) Rs 55,680/- Software and Database Lab 8. Online UPS Numeric 1000 ( Qty 01) Rs 1,60,000/- Software and Database Lab Physics 1 Hall Effect Setup Rs 58,275/- Physics Lab Physical education 1 Motorised Treadmill Aerofit AF 2008 1,40,000 Gymnasium Girls 2 Motorised Treadmill Aerofit AF 2008 1,40,000 Gymnasium Boys MCA Lab 1 and Lab 3/ for practicals HOD/Admin work 1. Acer Commercial Veriton M200 Desktops 9,60,000/- HOD/ Gems issues Staff/ DEC work RICOH Projectors with Smart Interactive 2. 1,04,000/- Classroom 1/Teaching Purpose Board 3 ACER Laptop 43,339.60/- HOD/GEMS For GEMS and Departmental 4 Lenovo Tablet 11,999.00/- use EDT 1. OWAN ,DSO 200MHz (Qty 02) 55,846.88/- System Design Lab Software Defined Radio , Akademika Lab System Design Lab used for 2. 1,62,873/- solutions (Qty 01) Projects of UG students System Design Lab used for 3. ProteousVSM Software (10 users) 4,46,250/- Projects of UG students DSP starter Kit , Akademika Lab solutions System Design Lab used for 4. 32,574.50/- (Qty 02) Projects of UG students PCB Lab: For fabrication of 854335/- 5. ProtoMat S-42 Machine(Qty 01) single sided and double sided
PCB PCB Lab: Demonstration of 245025/- Radiation , susceptibility of 6. EMI/EMC Trainer Kit(Qty 01) Radiation of PCB shielding effectiveness, etc 7. PTH system (Qty 01) 4, 06519/- PCB lab: To make the
64 | P a g e
connection between two layers of double sided PCB
PCB lab:For designing of 308443/- 8. ORCAD15.7 - 5 user licensed software artwork with software and
simulate the design
75000/- PCB lab:For preparation of film 9. Vertical Reprographic Camera (Qty-01) master of the artwork
PCB lab:Used for soldering and PCB REWORK STN. WELTRON 737W 59000/- desoldering of through hole 10. (Qty01) component and surface mount component.
65 | P a g e
11.0 Concluding remarks
11.1 Adherence to the fulfillment of objectives of autonomy:
1. Determine and prescribe its own courses of study and syllabi, and restructure and redesign the courses to suit local needs: 2016-17 is the third batch graduating in autonomy. Over last six years, all the systems under autonomy has been formulated, modified & developed rigorously through the process of analysis, feedbacks and support by the stakeholders. The board of studies and academic council; with active support of external members from reputed organizations, has meticulously drafted various courses, schemes, rules & regulations; considering the objectives of the autonomy. The process of refinement of courses to suit the requirements of latest technology is continued. The initial anxiety of entering into an entirely new system is over and the course coordinators are now more confident in implementing the changes as desired for fulfilling the objectives of autonomy. The post graduate courses have adopted the CBCS from 2016-17.Though it was proposed that the UG engineering courses will adopt CBCS from 2017-18, in the light of Model Curriculum being proposed by AICTE the implementation is deferred till 2018-2019. All departments have done necessary arrangements for this.
2. Prescribe rules for admission in consonance with the reservation policy of the state government: All the admissions, including minority quota are done in transparent manner as per the rules and directions of the state government & other statutory bodies.
3. Evolve methods of assessment of students’ performance, the conduct of examinations and notification of results: Complete freedom is extended to the course coordinators to devise the methods for assessment of the student’s performance. The faculty is now more aware regarding the intricacies of the relative grading system. The nature of question papers is now such as to facilitate the desired grading pattern. Results are notified after a due process of grievance redress system and grade moderation.
4. Use modern tools of educational technology to achieve higher standards and greater creativity: Latest software & instruments are procured by all the programs to cater to the needs of the curricula, keeping in mind the state of the art requirements of all the stakeholders. GEMS are proving to be a powerful facilitator for management of different modules viz. academic, finance, library etc. Classrooms are now equipped to help better transfer of knowledge to
66 | P a g e
the student community. E-library has been developed with facilities like online journals, NPTEL, audio-visual systems etc. 5. Promote healthy practices such as community service, extension activities, projects for the benefit of the society at large, neighborhood programmes, etc.: The aim of NSS is the personality development of a student through community service. The Motto of NSS “Not Me but You” Reflects the essence of democratic living and up holds the need of selfless service. The main objective of NSS is to work amongst and for the people, and therefore every NSS volunteer strives for the betterment of the society.
1) Blood Donation: - NSS organization joined hands with Dr.Hedgewar Blood Bank, Nagpur to raise awareness on voluntary unpaid blood donations on September 12 wherein, 80 volunteers joined hands together and collected 125 units of fresh blood.
2) YESTALGIA: An event for the first year’s students of RCOEM organised on October 13 which basically focused on to test their presence of mind regarding the present social issues-the society is witnessing and what are the measures an individual can take to fight against them. The event was made successful by the active participation of 200 students.
3) NSS FOUNDATION DAY (RALLY FOR RIVERS): - NSS Foundation day was on September 24 by a Rally with focused on the improving the condition of Holy Rivers’ of India and successfully ended up with a street play on-“Current shortage of potable water and its consequences”. Around 110 NSS volunteers participated actively in the event. The volunteers along with the members of ISHA Foundation walked for the cause, Thereby spreading the steps and measure to be adopted for saving the Rivers.
4) Orphanage Visit: - Diwali is a festival of giving Happiness. And the best way to celebrate Diwali and spread happiness is with the Children in need. NSS volunteers on October 17 visited “MANORAMA ORPHANAGE” for the Diwali Celebration and gifted the Children with sweets and Diwali presents. The children were delighted with such love which was reciprocated by the smiles on their faces.
5) Annakoot: - As Lord Krishna said , “ Fill your mind with me , Love me , Serve me, Worship me always . Seek me in your heart , you will at last be united with me “. With this great spirit and devotion , NSS unit contributed in the festival of Annakoot on October 17 organised by Shri Ramdeobaba College of Engineering and Management. On this auspicious occasion , around 300 NSS volunteers served holy Prasad to a crowd of around 10000 devotees. NSS volunteers under the guidance of College Management managed the whole event in a very smooth and efficient manner.
6) I-Clean: -One step towards cleanliness is acknowledged for nationwide SWACCH BHARAT ABHIYAN. To take the initiative forward, volunteers of NSS Unit of Shri Ramdeobaba College of Engineering And Management with supportive collaboration of I-Clean Nagpur worked to clean the vicinity of college. The initiative not only means cleaning a place and keeping it same throughout but also redecorating it. Hence volunteers painted walls of College vicinity with Worli Paintings. 67 | P a g e
7) Prerna(Special social service Camp)10.0: - NSS unit of RCOEM conducted its annual event Prerna 10.0, a four daylong event from 08th to 11th Feb 2018 inaugurated by Mr.KhushrooPoacha, founder of Seva kitchen and Indian blood donor’s website. The main aim of this program was to create social awareness among technocrats by means of various inter-collegiate social events. Junoon-Succeed against all odds- An event to showcase the talent of especially abled children. The word “Junoon” itself means passion and this passion moves them beyond their shortcomings and failures. Mr. Vijay Munishwar witnessed the event. Health Check-up camp- It was organised for the teaching as well as non-teaching staff at our college and also for the villagers of Malegaon near Nagpur, around 200 villagers took part in the event and got benefited. The dentists, Gynaecologist, eye specialist contributed to the event and made it a huge success. Walk-a-Thon- In the cause of Women’s Respect, RCOEM participated in Walk-a-Thon. The event was concluded by the National Anthem. Around 125 students and faculties participated in this Nobel act. First aid-Dr.DACHEWAR sir made all the students, staff and guards aware of the techniques to be used in first aid. He demonstrated and explained the measures to be taken while doing the first aid. Village Activity: - This year volunteers of NSS Unit visited SONKHAMB village and conducted Health check-up camp followed by awareness about sanitation by presenting a play on the cause. The NSS Unit of RCOEM has adopted the above mentioned for three years in order to ensure the sustainable development and awareness about sanitation, education and health of village.
11.2 Committee’s recommendations for future academic progress: In order to strengthen the academic process and the betterment of teaching-learning process, the following recommendations are made: 1. RCOEM is now 34 years in Engineering Education. This is the most appropriate time for converting to University, as it the next step in the growth of the institution. It will facilitate independent Research & Development, introduction of new courses, consultancy & collaboration with foreign universities, twining programmes with foreign universities and collaboration with reputed industrial houses.
68 | P a g e