Dished Panel Dished Ideal cutter for Raiser ! Radius kitchen or cabinet doors. 12,000 D Mould

D

C1 C

C2 R R

R=26mm R=50mm 18/18 D=32mm 18/15 D=73mm C1=6mm C=22mm 1/2" C2=5.5mm 1/4" £104.00 £55.00

Vertical Vertical Vertical Vertical Panelling Panelling Panelling Panelling Radius Classic Ogee Style D

C R1

A R R2 R1 A Shape approx. R2 equivalent to Ref. Shape approximately Shape approx. Shape approximately A=85¡ 18/83. Suitable R1=3mm R1=20mm equivalent to Ref. A=75¡ equivalent to Ref. R=40mm equivalent to Ref. R2=8mm for use with Refs. R2=18mm 18/80. Suitable panel D=28.5mm 18/81. Suitable D=28.5mm 18/82. Suitable panel D=25.4mm PSC/1, PSC/2, D=30mm mould for use with C=38mm for use with Refs. C=38mm mould for use with C=38mm PSC/10 & C=38mm Refs. PSC/5 & PSC/50. PSC/4 & PSC/40. Refs. PSC/3 & PSC/30. PSC/20. 18/90 18/91 18/92 18/93 8mm 1/2" 8mm 1/2" 8mm 1/2" 8mm 1/2" £58.50 £58.50 £58.50 £58.50 £58.50 £58.50 £58.50 £58.50

Sketch shows cutting towards you. Why use Vertical Panel Panel & Ref. 16/2 A range of three small sized panelling cutters. Mould Cutters? Veining Ideal for veining and fluting applications. When 8mm collet router is available (with no table). When there is no variable speed facility on router. Cost of cutter is important. R=4.8mm R=6.0mm R=7.5mm Shaped work is not D=9.5mm D=13mm D=14.5mm Cutter required. C=7.5mm C=12.5mm C=19.5mm Material Top board for When used in a portable router base Side board to run on machine the panel will need to C 16/2 16/3 16/4 to support R material be clamped vertically with an D 1/4" 1/4" 1/4" Bench extra support base for the £27.50 £32.00 £35.50 vice/ router.

D Heavy Duty Ovolos Three ovolo cutters ideal for fluting spindles and other decorative turned work. They have a small flat ground on the nose that produces a very fine cut, C1 suitable for routing false panel mouldings and engraving work.

R C2

R1

R1=6mm R2 R=18mm R=25mm R2=15mm D=44mm D=41.5mm D=41.5mm C1=5mm C1=11mm C1=8mm C2=11mm C2=8mm C2=7mm

16/5 16/6 16/8 1/2" 1/2" 1/2" £79.50 £79.50 £82.50

All prices are exclusive of VAT ! For stationary machines at recommended speeds as indicated. 55