Passive House Research Rd2-Rf

Total Page:16

File Type:pdf, Size:1020Kb

Passive House Research Rd2-Rf Accelerating Market Transformation for High-Performance Building Enclosures State of market, policy developments, and lessons learned from the Passive House movement Tom-Pierre Frappé-Sénéclauze | Dylan Heerema | Karen Tam Wu September 2016 photo: Sonia photo: Zouari Accelerating Market Transformation for High- Performance Building Enclosures State of market, policy developments, and lessons learned from the Passive House movement Tom-Pierre Frappé-Sénéclauze Dylan Heerema Karen Tam Wu September 2016; revised May 2017 Editor: Roberta Franchuk Enclosures: State of market, policy developments, Cover Photo: Salus Clementine, Ottawa. Photo and lessons learned from the Passive House by Sonia Zouari. movement. The Pembina Institute, 2016. ©2016 The Pembina Institute The Pembina Institute 219 19 Street NW All rights reserved. Permission is granted to Calgary, AB reproduce all or part of this publication for non- Canada T2N 2H9 commercial purposes, as long as you cite the Phone: 403-269-3344 source. Additional copies of this publication may be Recommended citation: Frappé-Sénéclauze, downloaded from the Pembina Institute website, Tom-Pierre et. al. Accelerating Market www.pembina.org. Transformation for High-Performance Building Pembina Institute Accelerating Market Transformation for High-Performance Building Enclosures | ii About the Pembina Institute The Pembina Institute is a national non-partisan think tank that advocates for strong, effective policies to support Canada’s clean energy transition. We employ multi-faceted and highly collaborative approaches to change. Producing credible, evidence-based research and analysis, we consult directly with organizations to design and implement clean energy solutions, and convene diverse sets of stakeholders to identify and move toward common solutions. ————————————————— pembina.org ————————————————— twitter.com/pembina facebook.com/pembina.institute Acknowledgements The authors would like to thank Nicole Flanagan (2016 Loran Scholar intern) and Bassam Javed (2015 PICS intern) for their invaluable research assistance in the preparation if this report. These reviewers provided comments on the final draft of this report; we are grateful for their insight: • Rob Bernhardt, Passive House Canada • Christina Bollo, University of British Columbia • Patrick Enright, City of Vancouver • Graham Finch, RDH Building Science Inc. • Mark Frankel, New Buildings Institute • Katrin Klingenberg, Passive House Institute US • Micah Lang, City of Vancouver • Chris Mattock, Habitat Design + Consulting Ltd. • Monte Paulsen, Red Door Energy Design Ltd. • Jieying Wang, FPInnovations The authors would also like to thank the 21 practitioners and policy makers who provided insights and perspective on the market during interviews conducted in August 2015; their names are listed in Appendix A. Pembina Institute Accelerating Market Transformation for High-Performance Building Enclosures | iii This study was made possible by a Carbon Neutral Cities Alliance Innovation Fund grant from the Urban Sustainability Directors Network, a Greenest City grant from the Vancouver Foundation, and the support of the Real Estate Foundation of B.C. Pembina Institute Accelerating Market Transformation for High-Performance Building Enclosures | iv Accelerating Market Transformation for High- Performance Building Enclosures State of market, policy developments, and lessons learned from the Passive House movement Contents Executive Summary ............................................................................................................. 1 1. Introduction ................................................................................................................. 12 2. State of the market ..................................................................................................... 21 2.1 State of the passive building stock .................................................................... 22 2.2 Design challenges for non-domestic buildings ................................................ 25 2.3 Certified practitioners and networks ................................................................ 28 2.4 Supporting public policies .................................................................................. 32 2.5 Conclusion ............................................................................................................ 35 3. Energy case for passive design ................................................................................. 36 3.1 Energy performance of certified LEED projects ............................................... 39 3.2 Energy performance of passive buildings ........................................................ 45 4. Incremental costs ........................................................................................................ 54 5. Moisture control in highly insulated buildings ........................................................ 62 5.1 Moisture in building enclosures: the basics ..................................................... 65 Pembina Institute Accelerating Market Transformation for High-Performance Building Enclosures | v 5.2 Wood frame construction ................................................................................... 67 5.3 Non-combustible construction .......................................................................... 72 5.4 Conclusion ............................................................................................................ 73 6. Cooling and the risk of overheating ......................................................................... 77 6.1 Passive cooling strategies ................................................................................... 80 6.2 Standards for thermal comfort .......................................................................... 83 6.3 Thermal comfort in certified Passive Houses: monitoring studies ................ 84 6.4 Conclusion ............................................................................................................ 87 7. Part 1: Conclusion ....................................................................................................... 89 8. Using public policy to address barriers .................................................................... 94 8.1 Models of transition ............................................................................................ 95 9. Political vision and regulation ................................................................................... 98 9.1 Public buildings procurement policies .............................................................. 99 9.2 Land use changes and rezoning ...................................................................... 102 9.3 Zoning relaxations for thick walls .................................................................... 104 9.4 Streamlining permitting and inspection ......................................................... 105 9.5 Passive House requirements in building regulations .................................... 105 10. Industry capacity ..................................................................................................... 109 10.1 Networks and technical support .................................................................... 110 10.2 Informal networks of practitioners ............................................................... 111 10.3 Online resources .............................................................................................. 112 10.4 Airtightness testing requirements ................................................................. 113 11. Business case and financing .................................................................................. 116 11.1 Energy labelling and benchmarking .............................................................. 117 11.2 Design competitions to increase demand and visibility ............................. 119 11.3 Direct and indirect subsidies .......................................................................... 121 11.4 Financing ........................................................................................................... 122 12. Supply chain ............................................................................................................ 127 12.1 Predictability of demand and component incentives ................................. 128 12.2 Industry partnerships ...................................................................................... 129 13. Public and industry awareness of passive design and benefits ....................... 130 Pembina Institute Accelerating Market Transformation for High-Performance Building Enclosures | vi 13.1 Energy labelling ................................................................................................ 130 13.2 Awareness campaigns .................................................................................... 131 14. Quality assurance ................................................................................................... 133 14.1 Passive House certification ............................................................................. 133 14.2 Performance bonds ......................................................................................... 134 14.3 Monitoring studies and monitoring of market through benchmarking ... 134 15. Part 2: Conclusion ................................................................................................... 135 Appendix
Recommended publications
  • Energuide for Houses and the New Housing Market
    HOT2.XP: ENERGUIDE FOR HOUSES AND THE NEW HOUSING MARKET Ted Kesik Michael Lio Architecture, Landscape and Design Lio Associates University of Toronto Toronto, Ontario [email protected] [email protected] ABSTRACT INTRODUCTION This paper presents the use of HOT2-XP1 within a 1999 The EnerGuide for Houses Program seeks to improve pilot project sponsored by Natural Resources Canada the energy efficiency of housing in the marketplace by (NRCan), which involved the evaluation and energy providing an accurate and effective means of rating the rating of 64 new homes in Ontario according to the energy efficiency of houses. The EnerGuide ratings for EnerGuide2 for Houses Procedures and Guidelines [1]. household appliances and energy conversion equipment are familiar to consumers, and a rating system for Prior to the introduction of the EnerGuide for Houses houses represents a logical extension of information Program, the only formal method for assessing the that enables informed decision making by homebuyers. energy efficiency of new housing was the R-20003 Design Approval Procedures and Guidelines [2]. These Initially, the EnerGuide for Houses Program was were tied to the R-2000 Program criteria and relied on a targeted at existing homes, most of which were detailed assessment of house characteristics using significantly less energy efficient than homes currently 4 HOT2000 . HOT2.XP was developed as a derivative constructed across Canada. This pilot project was of HOT2000 for use within the EnerGuide for Houses intended to apply program guidelines and procedures to Program, aimed initially at improving the energy the new housing market to assess its suitability.
    [Show full text]
  • Mandatory Home Energy Rating and Disclosure for Existing Houses: Opportunities and Risks for Consumers
    Mandatory Home Energy Rating and Disclosure for Existing Houses: Opportunities and Risks for Consumers March 2018 Copyright © 2018 Consumers Council of Canada Consumers Council of Canada Commercial Building, 201-1920 Yonge Street, Toronto, Ontario M4S 3E2 i Consumers Council of Canada Acknowledgements The Consumers Council of Canada acknowledges the staff of buildABILITY, who contributed to the report, and the project’s methodologist: Russell Richman. Edith Yu Michael Lio Magdalena Krawcyzk The Consumers Council of Canada also acknowledges the insightful and valuable contribution of its Project Advisory Committee in the review of the report’s literature reviews and homeowner surveys. The Project Advisory Committee did not contribute directly to the Conclusions and Recommendations. Participation in the Committee does not imply an endorsement of the report, its findings, conclusions, or recommendations. In all instances, the views expressed in this report are those of the authors and are not necessarily those of the committee. Marshall Leslie Consumers Council of Canada, Energy and Housing Committee Julie Girvan JE Girvan Enterprises Elizabeth McDonald Canadian Energy Efficiency Alliance Erika Lontoc Enbridge Gas Distribution Bob Aaron Aaron& Aaron Barristers and Solicitors, The Toronto Star Joan Huzar Consumer Zoë Langevin NRCan Bill Burr Consumer Alison J Knight Consumer The Consumers Council of Canada has received funding from Innovation, Science and Economic Development Canada’s Contributions Program for Non-profit Consumer and Voluntary
    [Show full text]
  • Edmonton's Green Home Guide
    eDMONTON’S green HOME guide buying, selling or renovating a home? check out these energy-saving green ideas. 3rd Edition — Produced January 2017 Supported by: Printed on 100% Post Consumer ©2017 YOU’RE GONNA LOVE GREEN—EDMONTON.CA/GREENHOMEGUIDE Recycled Paper Congratulations. The fact that you’re about to buy a home, sell a home, or do some renovations means you’re planning for the future. And the fact that you’re about to explore Edmonton’s Green Home Guide means you’re thinking about Edmonton’s environmental future as well. INTRODUCTION Having a greener home ensures you and your family will live in a comfortable setting with lower utility bills. And research suggests that green homes, depending on their features, also increase in value at a greater rate than conventionally designed homes. What’s not to love about that! ! DISCLAIMER: Construction based on the Green Home Guide does not ensure compliance with the regulations of either the Edmonton Zoning Bylaw or the Alberta Building Code. Any approvals or inspections provided by the City of Edmonton will be based solely on those regulations and will neither confirm nor refute the standards of this guide. Homeowners considering undertaking construction related to this Guide should contact Sustainable Development to ensure such compliance, and to obtain the necessary permits, inspections, and approvals. For more information, please visit: edmonton.ca/SustainableDevelopment. INTRODUCTION INTRODUCTION a big step towards minimizing our environmental footprint Our homes have a significant impact on the city’s long-term sustainability. By taking some simple, affordable steps to greening your next home purchase or renovation, you’re helping to minimize Edmonton’s environmental footprint, one house at a time.
    [Show full text]
  • Housing Research Report
    Credit: CSV Architects and Gordon King Photography HOUSING RESEARCH REPORT Passive Approaches to Low-energy Affordable Housing Projects – Literature Review and Annotated Bibliography CMHC helps Canadians meet their housing needs. Canada Mortgage and Housing Corporation (CMHC) has been helping Canadians meet their housing needs for more than 70 years. As Canada’s authority on housing, we contribute to the stability of the housing market and financial system, provide support for Canadians in housing need, and offer unbiased housing research and advice to Canadian governments, consumers and the housing industry. Prudent risk management, strong corporate governance and transparency are cornerstones of our operations. For more information, visit our website at www.cmhc.ca or follow us on Twitter, LinkedIn, Facebook and YouTube. You can also reach us by phone at 1-800-668-2642 or by fax at 1-800-245-9274. Outside Canada call 613-748-2003 or fax to 613-748-2016. Canada Mortgage and Housing Corporation supports the Government of Canada policy on access to information for people with disabilities. If you wish to obtain this publication in alternative formats, call 1-800-668-2642. The information in this publication is a result of current research and knowledge. Readers should evaluate the information, materials and techniques cautiously for themselves and consult appropriate professional resources to see if the information, materials and techniques apply to them. The images and text are guides only. Project and site-specific factors (climate,
    [Show full text]
  • Energuide for Houses and the New Housing Market
    Canadian Conference on Building Energy Simulation, Natural Resources Canada, June 13 & 14, 2001, Ottawa, Canada HOT2.XP: ENERGUIDE FOR HOUSES AND THE NEW HOUSING MARKET Ted Kesik Michael Lio Architecture, Landscape and Design Lio Associates University of Toronto Toronto, Ontario [email protected] [email protected] ABSTRACT INTRODUCTION This paper presents the use of HOT2-XP1 within a 1999 The EnerGuide for Houses Program seeks to improve pilot project sponsored by Natural Resources Canada the energy efficiency of housing in the marketplace by (NRCan), which involved the evaluation and energy providing an accurate and effective means of rating the rating of 64 new homes in Ontario according to the energy efficiency of houses. The EnerGuide ratings for EnerGuide2 for Houses Procedures and Guidelines [1]. household appliances and energy conversion equipment are familiar to consumers, and a rating system for Prior to the introduction of the EnerGuide for Houses houses represents a logical extension of information Program, the only formal method for assessing the that enables informed decision making by homebuyers. energy efficiency of new housing was the R-20003 Design Approval Procedures and Guidelines [2]. These Initially, the EnerGuide for Houses Program was were tied to the R-2000 Program criteria and relied on a targeted at existing homes, most of which were detailed assessment of house characteristics using significantly less energy efficient than homes currently 4 HOT2000 . HOT2.XP was developed as a derivative constructed across Canada. This pilot project was of HOT2000 for use within the EnerGuide for Houses intended to apply program guidelines and procedures to Program, aimed initially at improving the energy the new housing market to assess its suitability.
    [Show full text]