progress 10.2b08 driver download Chipset - Intel - Caching Agent 0 - 2B08 Drivers Download. Intel Corporation is an American multinational corporation and technology company headquartered in Santa Clara, California, in Silicon Valley. It is the world's largest and highest-valued semiconductor chip manufacturer on the basis of revenue, and is the developer of the x86 series of microprocessors, the processors found in most personal computers (PCs). Intel ranked No. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue. Intel is incorporated in Delaware. Intel supplies microprocessors for computer system manufacturers such as Apple, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel Corporation was founded on July 18, 1968 by semiconductor pioneers Robert Noyce and Gordon Moore (of Moore's law), and is associated with the executive leadership and vision of Andrew Grove. The company's name was conceived as portmanteau of the words int egrated and el ectronics, with co-founder Noyce having been a key inventor of the integrated circuit (the microchip). The fact that "intel" is the term for intelligence information also made the name appropriate. Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business. During the 1990s, Intel invested heavily in new microprocessor designs fostering the rapid growth of the computer industry. During this period, Intel became the dominant supplier of microprocessors for PCs and was known for aggressive and anti- competitive tactics in defense of its market position, particularly against Advanced Micro Devices (AMD), as well as a struggle with Microsoft for control over the direction of the PC industry. The Open Source Technology Center at Intel hosts PowerTOP and LatencyTOP, and supports other open-source projects such as Wayland, Mesa3D, Threading Building Blocks (TBB), and Xen. Download Caching Agent 0 - 2B08 Computer Driver Update. Intel Corporation is an American multinational corporation and technology company headquartered in Santa Clara, California, in Silicon Valley. It is the world's largest and highest-valued semiconductor chip manufacturer on the basis of revenue, and is the developer of the x86 series of microprocessors, the processors found in most personal computers (PCs). Intel ranked No. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue. Intel is incorporated in Delaware. Intel supplies microprocessors for computer system manufacturers such as Apple, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel Corporation was founded on July 18, 1968 by semiconductor pioneers Robert Noyce and Gordon Moore (of Moore's law), and is associated with the executive leadership and vision of Andrew Grove. The company's name was conceived as portmanteau of the words int egrated and el ectronics, with co-founder Noyce having been a key inventor of the integrated circuit (the microchip). The fact that "intel" is the term for intelligence information also made the name appropriate. Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business. During the 1990s, Intel invested heavily in new microprocessor designs fostering the rapid growth of the computer industry. During this period, Intel became the dominant supplier of microprocessors for PCs and was known for aggressive and anti- competitive tactics in defense of its market position, particularly against Advanced Micro Devices (AMD), as well as a struggle with Microsoft for control over the direction of the PC industry. The Open Source Technology Center at Intel hosts PowerTOP and LatencyTOP, and supports other open-source projects such as Wayland, Mesa3D, Threading Building Blocks (TBB), and Xen. Need latest datadirect driver with 10.2B08 without full inst. When I download the Open Client from the download center, it installs the 10.2B driver version 5.30.00.109 PGOE1023.DLL. I would like to use this ODBC version: 10.2BSP8 7.10.02.48 PGOE27.DLL. Installing the service pack fails as it complains about the DLC variable. I only have the open client installed. How can I get the ODBC version I need ? All Replies. Assuming that you have 10.2B08 on another Windows machine, try option 1a/b of the following KB article: 000021257, "Is it possible to use an ODBC driver without a full installation?" Option #2 would not provide the later driver version; option #3 does not apply. This thread is closed. Copyright © Progress Software Corporation and/or its subsidiaries or affiliates. All rights reserved. OE Studio 10.2B and Windows 10. Sorry if this has been asked before buy I couldn't find any real discussion on the topic. Currently I have OE Studio 10.2B installed and happily running on Windows 7. The free Win10 upgrade finishes very soon and my laptop is one of the last in our company to get updated. I've been trying the install (OE Studio 10.2B 32bit) onto a fresh Win 10 laptop but it's not installing properly (environment variables like PROMSGS and registry and probably other things). I tried an install to custom directories first up (to match my existing setup) but that failed. I then thought ok - will just use Progress's default directories but that still fails. How have you gone if you have just updated your OS (Win7 to Win10) with OE Studio 32bit? Did it work properly after the upgrade or did you have a bunch of problems? Any comments would be appreciated. All Replies. 1) Install 10.2B and make sure you right click the installer and select the ”Run as Administrator” option. 2) Install the 10.2B08 service pack. Thanks for your help - will try it out this morning. Unfortunately trying to run the service pack fails with OpenEdge 10.2B installation corrupted: DLC registry key not found. Click OK to exit. WiIll probably call Tech Support to see what they have to say. Thanks - I believe it looks like the problem described in KB000012311 - unfortunately, since I want 10.2B to support an existing site running 10.2B, going to 11.3 where the problem is fixed isn't feasible currently. This version has successfully installed on Win 7 but maybe the Win10 installed hit the problem described in the KB. I did find that registry corruption fix program yesterday and had run it but it didn't fix it for me. Have logged a support case (00355123) so I guess I can see if they have any solution. Thanks for pointing out the KB's. If it is indeed the 'registry corruption' bug, then you can go there (regedit) and fix them yourself. There should be an extra string in each product key which needs removing, or export the registry (both HKLM, HKCU), bulk replace in notepad and load them back. Using the Registry Corruption Tool resolved this issue. OpenEdge r installation corrupted: "DLC" registry key not found. Click OK to exit. This thread is closed. Copyright © Progress Software Corporation and/or its subsidiaries or affiliates. All rights reserved. 10.2B08 Windows 2008R2: Database not started complete and ap. If they are started by script at boot (adminserver -> appserver -> starts db and other appserver) _mprosrv and _proapsv are visible but somes db's never accepts connections. Wed Mar 12 08:46:49 2014 [2014/03/12@08:46:49.466+0100] P-4192 T-4292 I BROKER 0: (333) Multi-user session begin. [2014/03/12@08:46:49.901+0100] P-4192 T-4292 I BROKER 0: (5326) Begin Physical Redo Phase at 0 . [2014/03/12@08:46:52.307+0100] P-4192 T-4292 I BROKER 0: (7161) Physical Redo Phase Completed at blk 119 off 3366 upd 388. [2014/03/12@08:46:52.308+0100] P-4192 T-4292 I BROKER 0: (13547) At end of Physical redo, transaction table size is 128. [2014/03/12@08:46:52.325+0100] P-4192 T-4292 I BROKER 0: (452) Login by winsure on batch. [2014/03/12@08:46:52.326+0100] P- 4192 T-4292 I BROKER 0: (4234) Progress OpenEdge Release 10.2B build 1907 SP08 on WINNT . [2014/03/12@08:46:52.327+0100] P- 4192 T-4292 I BROKER 0: (4281) Server started by winsure on batch. [2014/03/12@08:46:52.328+0100] P-4192 T-4292 I BROKER 0: (-- ---) Started using pid: 4192. [2014/03/12@08:46:52.329+0100] P-4192 T-4292 I BROKER 0: (4235) Physical Database Name (-db): C:\ProgramData\Progress\eNora\winsureuk\winprint\db\2014\wp2014. [2014/03/12@08:46:52.331+0100] P-4192 T-4292 I BROKER 0: (4236) Database Type (-dt): PROGRESS. [2014/03/12@08:46:52.332+0100] P-4192 T-4292 I BROKER 0: (4237) Force Access (-F): Not Enabled. [2014/03/12@08:46:52.332+0100] P-4192 T-4292 I BROKER 0: (4238) Direct I/O (-directio): Not Enabled. [2014/03/12@08:46:52.334+0100] P-4192 T-4292 I BROKER 0: (-----) LRU mechanism enabled. [2014/03/12@08:46:52.335+0100] P- 4192 T-4292 I BROKER 0: (-----) Number of LRU force skips (-lruskips): 0 [2014/03/12@08:46:52.336+0100] P-4192 T-4292 I BROKER 0: (-----) Number of LRU2 force skips (-lru2skips): 0 [2014/03/12@08:46:52.336+0100] P-4192 T-4292 I BROKER 0: (4239) Number of Database Buffers (-B): 3000. [2014/03/12@08:46:52.337+0100] P-4192 T-4292 I BROKER 0: (-----) Number of Alternate Database Buffers (-B2): 0. [2014/03/12@08:46:52.338+0100] P-4192 T-4292 I BROKER 0: (9422) Maximum private buffers per user (-Bpmax): 64. [2014/03/12@08:46:52.339+0100] P-4192 T-4292 I BROKER 0: (4240) Excess Shared Memory Size (-Mxs): 23. [2014/03/12@08:46:52.340+0100] P-4192 T-4292 I BROKER 0: (10014) The shared memory segment is not locked in memory. [2014/03/12@08:46:52.340+0100] P-4192 T-4292 I BROKER 0: (4241) Current Size of Lock Table (-L): 8192. [2014/03/12@08:46:52.341+0100] P-4192 T-4292 I BROKER 0: (13953) Maximum Area Number (-maxArea): 32000. [2014/03/12@08:46:52.341+0100] P-4192 T-4292 I BROKER 0: (4242) Hash Table Entries (-hash): 887. [2014/03/12@08:46:52.342+0100] P-4192 T-4292 I BROKER 0: (4243) Current Spin Lock Tries (-spin): 24000. [2014/03/12@08:46:52.342+0100] P-4192 T-4292 I BROKER 0: (6526) Number of Semaphore Sets (-semsets): 3. [2014/03/12@08:46:52.343+0100] P-4192 T-4292 I BROKER 0: (13924) Maximum Shared Memory Segment Size (-shmsegsize) 128 Mb. [2014/03/12@08:46:52.343+0100] P-4192 T-4292 I BROKER 0: (4244) Crash Recovery (-i): Enabled. [2014/03/12@08:46:52.344+0100] P-4192 T-4292 I BROKER 0: (6573) Database Blocksize (-blocksize): 8192. [2014/03/12@08:46:52.344+0100] P-4192 T-4292 I BROKER 0: (4245) Delay of Before-Image Flush (-Mf): 3. [2014/03/12@08:46:52.345+0100] P-4192 T-4292 I BROKER 0: (4247) Before-Image File I/O (-r -R): Reliable. [2014/03/12@08:46:52.349+0100] P-4192 T-4292 I BROKER 0: (4249) Before-Image Truncate Interval (-G): 0. [2014/03/12@08:46:52.350+0100] P-4192 T-4292 I BROKER 0: (4250) Before-Image Cluster Size: 524288. [2014/03/12@08:46:52.350+0100] P-4192 T-4292 I BROKER 0: (4251) Before-Image Block Size: 8192. [2014/03/12@08:46:52.351+0100] P-4192 T-4292 I BROKER 0: (4252) Number of Before-Image Buffers (-bibufs): 20. [2014/03/12@08:46:52.351+0100] P-4192 T-4292 I BROKER 0: (-----) Record free chain search depth factor 5 (-recspacesearchdepth) [2014/03/12@08:46:52.352+0100] P-4192 T-4292 I BROKER 0: (9238) BI File Threshold size (-bithold): 0.0 Bytes. [2014/03/12@08:46:52.353+0100] P-4192 T-4292 I BROKER 0: (6552) BI File Threshold Stall (-bistall): Disabled. [2014/03/12@08:46:52.354+0100] P-4192 T-4292 I BROKER 0: (4254) After-Image Stall (-aistall): Not Enabled. [2014/03/12@08:46:52.354+0100] P-4192 T-4292 I BROKER 0: (4255) After-Image Block Size: 8192. [2014/03/12@08:46:52.355+0100] P-4192 T-4292 I BROKER 0: (4256) Number of After-Image Buffers (-aibufs): 20. [2014/03/12@08:46:52.356+0100] P-4192 T-4292 I BROKER 0: (8527) Storage object cache size (-omsize): 1024 [2014/03/12@08:46:52.356+0100] P-4192 T-4292 I BROKER 0: (4257) Maximum Number of Clients Per Server (-Ma): 5. [2014/03/12@08:46:52.357+0100] P-4192 T-4292 I BROKER 0: (4258) Maximum Number of Servers (-Mn): 5. [2014/03/12@08:46:52.359+0100] P-4192 T-4292 I BROKER 0: (4259) Minimum Clients Per Server (-Mi): 1. [2014/03/12@08:46:52.360+0100] P-4192 T-4292 I BROKER 0: (-----) Server network message wait time (-Nmsgwait): 2 [2014/03/12@08:46:52.360+0100] P-4192 T-4292 I BROKER 0: (-----) Use pollset mechanism for client/server (-pollset): Disabled [2014/03/12@08:46:52.361+0100] P-4192 T-4292 I BROKER 0: (-----) Delay first prefetch message (-prefetchDelay): Disabled [2014/03/12@08:46:52.361+0100] P-4192 T-4292 I BROKER 0: (-----) Prefetch message fill percentage (-prefetchFactor): 0 [2014/03/12@08:46:52.362+0100] P-4192 T-4292 I BROKER 0: (-----) Minimum records in prefetch ms (-prefetchNumRecs): 16 [2014/03/12@08:46:52.362+0100] P-4192 T-4292 I BROKER 0: (-----) Suspension queue poll priority (-prefetchPriority): 0 [2014/03/12@08:46:52.363+0100] P-4192 T-4292 I BROKER 0: (4260) Maximum Number of Users (-n): 21. [2014/03/12@08:46:52.363+0100] P-4192 T-4292 I BROKER 0: (4261) Host Name (-H): Not Enabled. [2014/03/12@08:46:52.364+0100] P-4192 T-4292 I BROKER 0: (4262) Service Name (-S): Not Enabled. [2014/03/12@08:46:52.364+0100] P-4192 T-4292 I BROKER 0: (4263) Network Type (-N): Not Enabled. [2014/03/12@08:46:52.406+0100] P-4192 T-4292 I BROKER 0: (4264) Character Set (- cpinternal): ISO8859-1. [2014/03/12@08:46:52.406+0100] P-4192 T-4292 I BROKER 0: (4282) Parameter File: Not Enabled. [2014/03/12@08:46:52.407+0100] P-4192 T-4292 I BROKER 0: (9426) Large database file access has been enabled. [2014/03/12@08:46:52.407+0100] P-4192 T-4292 I BROKER 0: (9336) Created shared memory with segment_id: 39190528 [2014/03/12@08:46:52.407+0100] P-4192 T-4292 I BROKER 0: (12813) Allowed index cursors (-c): 84. [2014/03/12@08:46:52.408+0100] P-4192 T-4292 I BROKER 0: (12814) Group delay (-groupdelay): 10. [2014/03/12@08:46:52.408+0100] P-4192 T-4292 I BROKER 0: (12815) Lock table hash table size (-lkhash): 1237 [2014/03/12@08:46:52.408+0100] P-4192 T-4292 I BROKER 0: (12818) Message Buffer Size (-Mm): 1024 [2014/03/12@08:46:52.408+0100] P-4192 T-4292 I BROKER 0: (12821) Use muxlatches (-mux): 1 [2014/03/12@08:46:52.409+0100] P- 4192 T-4292 I BROKER 0: (12823) Semaphore Sets (-semsets): 3 [2014/03/12@08:46:52.409+0100] P-4192 T-4292 I BROKER 0: (13870) Database Service Manager - IPC Queue Size (-pica) : 64.0 KBytes. [2014/03/12@08:46:52.409+0100] P-4192 T-4292 I BROKER 0: (13896) TXE Commit lock skip limit (-TXESkipLimit): 10000. [2014/03/12@08:46:52.410+0100] P-4192 T-4292 I BROKER 0: (15219) Encryption enabled: 0 [2014/03/12@08:46:52.410+0100] P-4192 T-4292 I BROKER 0: (15218) Encryption cache size (-ecsize): 1000. Then database log finished, at least this. [2014/03/12@11:44:58.576+0100] P-12728 T-12564 I BROKER 0: (10471) Database connections have been enabled. If i try proshut on this "nearly started" db it hungs, mpro hangs too, like the appserver which tries to connect the database through shared memory. All Replies. Richard Banville Fellow, OpenEdge Development. PROGRESS SOFTWARE CORPORATION 14 Oak Park | Bedford, MA 01730 | USA DIRECT +1 781 280 4875 [email protected]. databases are started by _mprosrv. If they are started by script at boot (adminserver -> appserver -> starts db and other appserver) _mprosrv and _proapsv are visible but somes db's never accepts connections. Wed Mar 12 08:46:49 2014 [2014/03/12@08:46:49.466+0100] P-4192 T-4292 I BROKER 0: (333) Multi-user session begin. [2014/03/12@08:46:49.901+0100] P-4192 T-4292 I BROKER 0: (5326) Begin Physical Redo Phase at 0 . [2014/03/12@08:46:52.307+0100] P-4192 T-4292 I BROKER 0: (7161) Physical Redo Phase Completed at blk 119 off 3366 upd 388. [2014/03/12@08:46:52.308+0100] P-4192 T-4292 I BROKER 0: (13547) At end of Physical redo, transaction table size is 128. [2014/03/12@08:46:52.325+0100] P-4192 T-4292 I BROKER 0: (452) Login by winsure on batch. [2014/03/12@08:46:52.326+0100] P- 4192 T-4292 I BROKER 0: (4234) Progress OpenEdge Release 10.2B build 1907 SP08 on WINNT . [2014/03/12@08:46:52.327+0100] P- 4192 T-4292 I BROKER 0: (4281) Server started by winsure on batch. [2014/03/12@08:46:52.328+0100] P-4192 T-4292 I BROKER 0: (-- ---) Started using pid: 4192. [2014/03/12@08:46:52.329+0100] P-4192 T-4292 I BROKER 0: (4235) Physical Database Name (-db): C:\ProgramData\Progress\eNora\winsureuk\winprint\db\2014\wp2014. [2014/03/12@08:46:52.331+0100] P-4192 T-4292 I BROKER 0: (4236) Database Type (-dt): PROGRESS. [2014/03/12@08:46:52.332+0100] P-4192 T-4292 I BROKER 0: (4237) Force Access (-F): Not Enabled. [2014/03/12@08:46:52.332+0100] P-4192 T-4292 I BROKER 0: (4238) Direct I/O (-directio): Not Enabled. [2014/03/12@08:46:52.334+0100] P-4192 T-4292 I BROKER 0: (-----) LRU mechanism enabled. [2014/03/12@08:46:52.335+0100] P- 4192 T-4292 I BROKER 0: (-----) Number of LRU force skips (-lruskips): 0 [2014/03/12@08:46:52.336+0100] P-4192 T-4292 I BROKER 0: (-----) Number of LRU2 force skips (-lru2skips): 0 [2014/03/12@08:46:52.336+0100] P-4192 T-4292 I BROKER 0: (4239) Number of Database Buffers (-B): 3000. [2014/03/12@08:46:52.337+0100] P-4192 T-4292 I BROKER 0: (-----) Number of Alternate Database Buffers (-B2): 0. [2014/03/12@08:46:52.338+0100] P-4192 T-4292 I BROKER 0: (9422) Maximum private buffers per user (-Bpmax): 64. [2014/03/12@08:46:52.339+0100] P-4192 T-4292 I BROKER 0: (4240) Excess Shared Memory Size (-Mxs): 23. [2014/03/12@08:46:52.340+0100] P-4192 T-4292 I BROKER 0: (10014) The shared memory segment is not locked in memory. [2014/03/12@08:46:52.340+0100] P-4192 T-4292 I BROKER 0: (4241) Current Size of Lock Table (-L): 8192. [2014/03/12@08:46:52.341+0100] P-4192 T-4292 I BROKER 0: (13953) Maximum Area Number (-maxArea): 32000. [2014/03/12@08:46:52.341+0100] P-4192 T-4292 I BROKER 0: (4242) Hash Table Entries (-hash): 887. [2014/03/12@08:46:52.342+0100] P-4192 T-4292 I BROKER 0: (4243) Current Spin Lock Tries (-spin): 24000. [2014/03/12@08:46:52.342+0100] P-4192 T-4292 I BROKER 0: (6526) Number of Semaphore Sets (-semsets): 3. [2014/03/12@08:46:52.343+0100] P-4192 T-4292 I BROKER 0: (13924) Maximum Shared Memory Segment Size (-shmsegsize) 128 Mb. [2014/03/12@08:46:52.343+0100] P-4192 T-4292 I BROKER 0: (4244) Crash Recovery (-i): Enabled. [2014/03/12@08:46:52.344+0100] P-4192 T-4292 I BROKER 0: (6573) Database Blocksize (-blocksize): 8192. [2014/03/12@08:46:52.344+0100] P-4192 T-4292 I BROKER 0: (4245) Delay of Before-Image Flush (-Mf): 3. [2014/03/12@08:46:52.345+0100] P-4192 T-4292 I BROKER 0: (4247) Before-Image File I/O (-r -R): Reliable. [2014/03/12@08:46:52.349+0100] P-4192 T-4292 I BROKER 0: (4249) Before-Image Truncate Interval (-G): 0. [2014/03/12@08:46:52.350+0100] P-4192 T-4292 I BROKER 0: (4250) Before-Image Cluster Size: 524288. [2014/03/12@08:46:52.350+0100] P-4192 T-4292 I BROKER 0: (4251) Before-Image Block Size: 8192. [2014/03/12@08:46:52.351+0100] P-4192 T-4292 I BROKER 0: (4252) Number of Before-Image Buffers (-bibufs): 20. [2014/03/12@08:46:52.351+0100] P-4192 T-4292 I BROKER 0: (-----) Record free chain search depth factor 5 (-recspacesearchdepth) [2014/03/12@08:46:52.352+0100] P-4192 T-4292 I BROKER 0: (9238) BI File Threshold size (-bithold): 0.0 Bytes. [2014/03/12@08:46:52.353+0100] P-4192 T-4292 I BROKER 0: (6552) BI File Threshold Stall (-bistall): Disabled. [2014/03/12@08:46:52.354+0100] P-4192 T-4292 I BROKER 0: (4254) After-Image Stall (-aistall): Not Enabled. [2014/03/12@08:46:52.354+0100] P-4192 T-4292 I BROKER 0: (4255) After-Image Block Size: 8192. [2014/03/12@08:46:52.355+0100] P-4192 T-4292 I BROKER 0: (4256) Number of After-Image Buffers (-aibufs): 20. [2014/03/12@08:46:52.356+0100] P-4192 T-4292 I BROKER 0: (8527) Storage object cache size (-omsize): 1024 [2014/03/12@08:46:52.356+0100] P-4192 T-4292 I BROKER 0: (4257) Maximum Number of Clients Per Server (-Ma): 5. [2014/03/12@08:46:52.357+0100] P-4192 T-4292 I BROKER 0: (4258) Maximum Number of Servers (-Mn): 5. [2014/03/12@08:46:52.359+0100] P-4192 T-4292 I BROKER 0: (4259) Minimum Clients Per Server (-Mi): 1. [2014/03/12@08:46:52.360+0100] P-4192 T-4292 I BROKER 0: (-----) Server network message wait time (-Nmsgwait): 2 [2014/03/12@08:46:52.360+0100] P-4192 T-4292 I BROKER 0: (-----) Use pollset mechanism for client/server (-pollset): Disabled [2014/03/12@08:46:52.361+0100] P-4192 T-4292 I BROKER 0: (-----) Delay first prefetch message (-prefetchDelay): Disabled [2014/03/12@08:46:52.361+0100] P-4192 T-4292 I BROKER 0: (-----) Prefetch message fill percentage (-prefetchFactor): 0 [2014/03/12@08:46:52.362+0100] P-4192 T-4292 I BROKER 0: (-----) Minimum records in prefetch ms (-prefetchNumRecs): 16[/collapse] Yes, it looks like a timing issue because the startup works if we do this one by one manually.