Université 8 mai 1945 Guelma Congrès Algérien de Mécanique Congrès Algérien de Mécanique ﺟﺎﻤﻌﺔ 8 ﻣﺎﻱ 1945 ﭬﺎﻟﻣﺔ November 14—17 2011 • Guelma, November 14—17, 2011 • Guelma, Algeria

Second Call for Papers / Second Appel à Communication L’Association Algérienne de Transfert Organising Committee / Comité d’Organisation de Technologie « @2t2 » Participants are invited to submit their papers (maximum of 10 pages) for oral or ﺍﻠﺠﻤﻌﻴﺔ ﺍﻠﺠﺰﺍﺌﺭﻴﺔ ﻠﺘﻨﻗﻞ ﺍﻠﺗﻜﻨﻮﻠﻮﺠﻴﺍﺖ Honorary Chairs / Présidents d’honneur poster presentation. The paper as a MsWord file (.doc) single column should be Nemmamcha Mohamed (President / Recteur) sent by email to the following address: [email protected]. The authors have Aissaoui Mohamed Zine (Vice-President / Vice-Recteur) to make sure that their paper is related to one of the congress topics. Honorary Co-Chairs / Co-Présidents d’honneur Deadline for communication submission February 28, 2011 Fatmi Louendi (Dean / Doyen) Notification of acceptance May 20, 2011 Damou Ahmed (@2t2 President / Président de @2t2) Corrected and final paper June 20, 2011 Congrès Algérien Deadline of Congress Registration June 20, 2011 General Chair / Président Deadline of Registration Fees Payment August 31, 2011 Boukharouba, T. () Bouzouane, B. (Algiers) Djamaa, M.C. (Guelma) Accepted papers (oral presentations and posters) will be included in the confer- Co-Chairs / Co-Présidents Kharoubi, M. (Guelma) ence proceedings which will be available at the opening of the congress and Ouelaa, N. (Guelma) Djebala, A. (Guelma) de Mécanique distributed to delegates after payment of registration fees. Guenfoud Mohamed (Guelma) Kaoua, S.A. (Algiers) Taleb, L. (Rouen) Boudjahem, H. (Guelma) Les participants sont invités à soumettre leurs articles (10 pages max.) pour Nait-Abdelaziz, M. (Lille) Kribes, N. (Guelma) présentation orale ou poster. Prière envoyer vos articles en format MsWord en Hamzaoui, N. (Lyon) Boukerroum, S. (Algiers) une seule colonne, par e-mail à l’adresse suivante: [email protected]. Les Boulahlib, M.S. (Constantine) Dib, M. (Algiers) auteurs doivent s’assurer que leurs articles relèvent clairement de l’un des Bentebbiche, H. (Algiers) Boukebbab, S. (Constantine) November 14—17, 2011 thèmes du congrès. Barkat, B. (Batna) Lechelah, R. (Algiers) Date limite de soumission des communications 28 février 2011 Assas, M. (Batna) Derouiche, A. (Algiers) Guelma, Algeria Mesbah, A. (Algiers) Notification d’acceptation 20 mai 2011 National Committee / Comité National Boulahia, R. (Algiers) Articles corrigés 20 juin 2011 Azouaoui, K. (Algiers) Belhadi, S. (Guelma) Date limite des Inscriptions au Congrès 20 juin 2011 Ouali, N. (Algiers) Boudjehem, D. (Guelma) Date Limite du paiement des Frais d’inscription 31 août 2011 Les articles sélectionnés pour les présentations orales et posters seront publiés er dans le recueil des actes du congrès, disponible le 1 jour dès paiement des frais CAM2011 Secretary / Secrétariat d’inscription. Antenne d’Alger Antenne de Guelma 3, Rue des Frères Aissou BP 143 Laboratoire de Mécanique & Structures Ben Aknoun 16030 Alger. (LMS) Tel. : (+213) (0)21 67 29 94 BP. 401, Université 8 mai 1945 Fax : (+213) (0)21 67 29 74 24000, Guelma Tel./Fax : (+213) (0)37 21 58 50

Email: [email protected] Website: http://www.cam-dz.org

Email : [email protected] Congress language / Langue du congrès English or French / Anglais ou Français http://www.cam-dz.org Scientific Committee / Comité Scientifique Topics / Thèmes

ABED-MERAIM K. (La Rochelle-France) GAUTHIER C. (Strasbourg-France) 1. MATERIAL MECHANICS / MÉCANIQUE DES MATÉRIAUX ABERKANE M. (Tizi-Ouzou-Algeria) GAZAU J.P. (Poitiers-France) (Matériaux Métalliques, Polymères, Céramiques et Composites) GUESSASMA M. (Saint-Quentin-France) - Loi de Comportement Monotone et Cyclique : Plasticité, Viscoplasticité… AHMED-BENYAHIA A. (Algiers-Algeria) - Interactions Thermiques - Mécanique - Métallurgie Congrès Algérien de Mécanique ADJLOUT H. (-Algeria) HADJADJ A. (Rouen-France) - Approches Multi-Échelles, Relations Comportement - Microstructure November 14—17, 2011 • Guelma, Algérie HAUET A. (Rouen-France) - Endommagement, Fatigue, Rupture ALLAOUI O. (-Algeria) The Algerian congress of Mechanics offers again this space of expression and ex- AMARA I. (Constantine-Algeria) HECINI M. (-Algeria) 2. VIBRATION, ACOUSTIC & MAINTENANCE / VIBRATION, ACOUSTIQUE & MAINTENANCE change, that much important, between communities mechanics of both north and AMROUCHE A. (Lille–France) KADEM A. (Montreal-Canada) - Gestion et Fiabilité de la Maintenance, Maîtrise du Risque, Retour d’Expérience - Techniques de Détection des Défauts : CND, Vibro-Acoustique, Thermographie, etc. south banks. The CAM2011 is welcomed this year by the University May 8th, '45 of KADJA M. (Constantine-Algeria) AYAD R. (Reims-France) - Acoustique Industrielle, Couplage Fluide-Structure Guelma from 14th to 17th of November 2011. The choice of the place joins in a will of KEBIR H. (Compiègne-France) - Dynamique et Vibration des Structures : Modélisations, Machines Tournantes AZARI Z. (Metz-France) opening of the organizers on all the universities of the Algerian territory. KHEZNADJI N. (Algiers-Algeria) BARBE F. (Rouen-France) 3. PRODUCTION ENGINEERING (CAD-CAM) / PRODUCTIQUE (CAO-CFAO) Ancient Roman , Kalama, today called Guelma, is situated in the heart of a big KHELIF R. (-Algeria) - Usinage à Grande Vitesse et Usinage des Matériaux Durs BELAOUAR A. (Constantine-Algeria) agricultural region at 290 m height, surrounded with mountains (Maouna, Dbegh, KHOLAI O. (Constantine-Algeria) - CAO/CFAO BELBLIDIA F. (Swansea-UK) - Usinage des Surfaces Complexes Houara) what gives it the name plate city, its region benefits from a big fertility due BELHAMRI A. (Constantine-Algeria) LACOUR C. (Rouen-France) - Dynamique de l'Usinage to Seybouse and from a big dam which covers a wide perimeter of irrigation. Its LAOUAR L. (Annaba-Algeria). - Procédés d’Usinages non Conventionnels (Electroérosion, Usinage par Laser, par Ultrason, etc.) BELLENGER E. (Saint Quentin-France) - X.AO Mécanique (Gestion de la Production, de la Qualité et de la Maintenance) agricultural and thermal resources were from time immemorial the pride of this LAULAGNET B. (Lyon-France) - Systèmes Flexibles de Production village. It also occupies a strategic geographical position, since it represents a BELOUCHRANI M.L. (Algiers-Algeria) LEBON F. (Marseille-France) crossroads in the northeast region of Algeria, connecting the coast Wilayas of An- BENAMAR A. (Oran-Algeria) 4. MECHANISMS & ROBOTICS / MÉCANISMES & ROBOTIQUE LIAZID A.K. (Oran-Algeria) naba, EI Tarf and , with the internal regions such as Wilayas of Constantine, BENAMARA A. (Monastir-Tunisia) - Dynamique des Systèmes Mécaniques Articulés MAHFOUD J. (Lyon-France) - Conception de Robots Oum EI Bouagui and . http://www.univ-guelma.dz/presentation/guelma- BENGUEDIAB M. (Sidi-Bel-Abbes-Algeria) - Micro Robotique MAHFOUDI C. (Oum-El-Bouaghi-Algeria) ville.asp BENMOHAMMED B. (Batna-Algeria) - Robots à Architecture Parallèle MAHRI Z. (Constantine-Algeria) - Robotique Mobile Three new topics are added to the previous ones and will constitute one of the con- BENOUIS A. (Guelma-Algeria) - Robotique Médicale MÉBARKI A. (Marne la Vallée-France) cerns and the new orientations of cam2011; Computer Aided Design and Manufacturing BENZADI A. (Constantine-Algeria) - Préhension et Manipulation MEDAERTS F. (Rouen-France) (CAD-CAM), Mechanisms and Robotics, Tribology and Contact Mechanics. BEZAZI A. (Guelma-Algeria) 5. TRIBOLOGY & CONTACT MECHANICS / TRIBOLOGIE & MÉCANIQUE DE CONTACT MELLAS M. (Biskra-Algeria) The topic of CAD-CAM concerns the systems of industrial production which face at BIROUK M. (Manitoba-Canada) - Mécanique des Surfaces et Tribologie MERAGHNI F. (Metz-France) - Contacts, Frottements et Interfaces present profound transformations. The improvement of the competitiveness of an BOUCHELAGUEM A. (Annaba-Algeria) NEMOUCHI Z. (Constantine-Algeria) - Modélisation des Mécanismes et Systèmes Complexes industrial system is strongly conditioned by the use of the advanced techniques such BOUDEBOUS S. (Constantine-Algeria) - Mécanique du Contact et Tribologie des Polymères as the Digital control of machines and more particularly the manufacturing 7 axes, PAVIC G. (Lyon-France) - Tribologie en Milieu Vivant BOUGHOUAS H. (Constantine-Algeria) the Conception, and the Computer-aided Manufacturing (CAD-CAM), the high-speed PLUVINAGE G. (Metz-France) - Modélisation et Analyse des Interactions Mécanique - Géométrie - Matériau BOUKHALFA M. (Rouen-France) Manufacturing, the manufacturing of complex surfaces, the non conventional proc- RAOUS M. (Marseille-France) 6. ENERGY MECHANICS / MECANIQUE ENERGETIQUE esses of manufacturing (laser, ultrasound), robotics, etc. BOUNAB B. (Algiers-Algeria) RAY P. (Clermont Ferrand-France) - Thermodynamique BRIMA A. (Biskra-Algeria) - Mécanique des Fluides The topic of Mechanisms and Robotics aims at the last developments of new ap- RESHEIDAT M. (Irbid-Jordan) - Turbulence proaches in the dynamics of the articulated mechanical systems, it handles the new CAILLETAUD G. (Paris-France) - Moteurs ROMDHANE L. (-Tunisia) aspects of the robotics microcomputing, the robots with parallel architectures and CHERGUI M. (Casablanca-Morocco ) - Turbomachines SAIM R. (-Algeria) - Combustion the mobile robots. This field also presents the new applications of robotics from the CHIKH N. (Constantine-Algeria) SIDOROFF F. (Lyon-France) - Transferts de Chaleur et de Masse prehension and the manipulation of objects to medical robotics by way of manufac- CHIKH S. (Algiers-Algeria) - Efficacité énergétique SOUZA DE CURSI E. (Rouen-France) - Développement durable turing by means of the parallel robots. COGNARD J.Y. (Brest-France) SPRAUEL J.M. (Aix-en-Provence-France) - Energies renouvelables (solaire et Biomasse) The conception and the realization of the mechanical sets are linked to the inevitable COOREVITS P. (Saint Quentin-France) - Stockage de l’énergie TAHERI S. (Paris-France) - Modélisation et simulation en énergétique imperfection of the processes of manufacturing which yield appearances of friction DJAMAA M.C. (Guelma-Algeria) TAMINE T. (Oran-Algeria) - Techniques de mesures integrated into the operating of the mechanical systems. The topic of Tribology and

DJELOUAH H. (Algiers-Algeria) Contact Mechanics aims mainly at the understanding of the tribology phenomena TAUPIN B. (Paris-France) 7. STRUCTURES / STRUCTURES ELGHORBA M. (Casablanca-Morocco ) VIRDI K. (London-UK) - Analyse des Structures sous Sollicitations Extrêmes (Séisme, Vent, Feu, Explosion, etc.) which govern among others the processes of shaping. More particularly, the recent FISSOLO A. (Rouen-France) WEICHERT D. (Aachen-Germany) - Renforcement, Réhabilitation et Vulnérabilité des Structures and new orientations in terms of conception, advanced processes, modelling / simu- - Méthodes Numériques Appliquées aux Calculs des Structures (Éléments Finis, Éléments Discrets, etc.) lation will be revealed during the CAM2011. FAUROUX J.C. (Clermont-Ferrand-France) YALLESE M.A. (Guelma-Algeria) - Stabilité et Analyse Non Linéaire des Structures