Cervelliere Limited
Stormwater & Safety Product Catalog
Last updated April 1st 2020
What's NEW
Quick Dam Flood Protection
On Pages 20 & 21.
PO Box 1052, Danville, CA 94526 Customer Service 925-240-3575 www.cervelliere.com Table of Contents
Stormwater Products Page
Erosion / Sediment Control Filtrexx SiltSoxx 2 Ultra-Dewatering Bags & Hose Connector 3 Ultra-Site Entrance Kit 4 Pollution Control Cervelliere-Spill Kit 5 Gallon Bucket 5 Oil Eating Microbes 6 Oil Only Absorbent Socks 7 Oil Only Absorbent Pads 7 Ultra-Absorbent Tarps® 8 Ultra-Concrete Washout Berms® 9 Ultra-Filter Pads 10 Ultra-Pipe Socks® 11 Ultra-Utility Tray® 12 Site Monitoring Ultra-Universal Sampler® 13 Ultra-Sampling Kits® 14 Storm Drain Protection FlexStrom Catch-it Lite Filters 15 Ultra-Drain Guard® 16 Drainiac Under-Grate Filter System 17 Ultra-Drain Seals® 18 FlexStorm Open Throat Inlet Filters 19 Storm / Flood Protection Quick Flood Bags & Barriers 20 Quick Flood Kits Buckets or Duffel Bags 21 Liquid Lock - 5 Gallon Bucket 22 Safety Products Personal Protective Equipment Safety Helmet 23 Safety Helmet Accessories 24
Three ways to order Email: [email protected] Online: www.cervelliere.com Phone: 925-240-3575 Erosion / Sediment Control
Filtrexx SiltSoxx
Filtrexx® SiltSoxx™ is the premier Soxx™ for check dam applications. They are generally used in ditches, channels and swales to protect specific areas by slowing concentrated stormwater flow velocity, reducing bed erosion and filtering sediment, pollutants and other particles. Check dams are highly effective at reducing flow velocities, simple to construct and require very low maintenance. A superior alternative to silt fence and other rock or concrete dam systems,
Filtrexx® Soxx™ technology is an ideal solution to filter runoff water around a storm drain drop or curb inlet. Our products help prevent sediment, debris and other particles from entering any storm drainage system. Water temporarily ponds behind the inlet protection— SiltSoxx — which allows deposition of suspended solids. Sediment and soluble pollutants — e.g. phosphorus and petroleum hydrocarbons — are filtered from runoff water as it passes through the organic structure.
Applications:
Drainage ditches Around drain inlets Small channels in front of curb inlets Swales As curb sediment containment system Around storm drain systems Receiving channels
Specifications Dimensions Price 70018' x 10" $35.00 Erosion / Sediment Control
Ultra-Dewatering Bags®
Contain silt, sediment and oil pumped out during dewatering operations
Draining swampy or low-lying areas is a common occurrence in construction. Unfortunately, pumping out the water from these areas also removes a lot of dirt, silt, mud, and debris along with the water. These contaminants can cause problems if they are simply discharged into a storm drain.
The Ultra-Dewatering Bag provides an economical and effective solution. By pumping water into the bag, silt, dirt, sand and other pollutants are trapped and filtered so only water escapes to the ground below or nearby storm drains.
Key Features: Detains both oil and sediment/silt, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Accommodates up to 4" discharge hose. Optional hose connector available - makes connecting and disconnecting Dewatering Bags quick and easy. Specifications:
Dimensions Capacity Weight in feet cu. Ft in lbs Price 9729 3' x 4' 6 2 $24.99 9724 6' x 6' 18 5 $34.99
Ultra-Dewatering Bags® Hose Connector Screws on to the end of discharge hoses to make connections (and disconnections) quick and easy - no more zip ties, wire, rope or strapping to hassle with.
Included quick-release hose clamp quickly secures dewatering bag.
PVC construction will not rust or corrode
Specifications Price 9739 Hose connector for 4" (102 mm) hoses $52.99 Erosion / Sediment Control
Ultra-Site Entrance Kit
Stabilize soil at construction site entrances and driveways
Ultra-Site Entrance Kits provide all the benefits of a 200 lb. woven geotextile without having to buy the whole roll. These kits are offered either 12.5 x 50 or 12.5 x 100 and include 12? pins to keep the fabric secure and in place. The fabric is a slit film, woven geotextile for use in soil stabilization and separation applications. So whether you are a homeowner replacing a driveway or a contractor starting a construction entrance, the driveway kit is the perfect product to help you get it done. Fabric is a heavy-duty, 200 lb. woven geotextile excellent for soil stabilization and separation applications on construction sites. Woven polypropylene geotextile has been stabilized to resist degradation due to ultraviolet exposure and is resistant to commonly encountered mildew, insects and soil chemicals and is non- biodegradable.
WARNING: This product contains chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Specifications Dimensions Weight in feet in lbs Price 870012 1/2' x 50' 26 $99.99 8702 12 1/2' x 100' 51 $179.99 Pollution Control
Cervelliere-Spill Kit 5 Gallon Oil Only
Quick Response is Key
Spills happen no matter how hard you try to avoid them. Forklifts knock over drums, tanks are punctured and transporters leak and drip. It is important to have the right sorbents on-hand when these spills occur to eliminate the slip-and-fall hazard. A quick response is the first order of business — and your best weapon — in the fight against spills. Description The Sorbents You Need Are All Inside Includes a variety of sorbents to handle spills of oil and other petroleum-based fluids — while repelling water; pre-packed in a UN- and DOT-approved 5-Gallon container. Self-contained Kit stores sorbent products for easy access as needed for spill control; saves time when quick response is necessary. Screw-top lid with gasket and built-in torque handle provides sealed and secure closure to protect sorbents from moisture, dirt and damage. Rust- and corrosion-free 100% polyethylene is durable to withstand rough handling.
Additional information: Contents of the Spill Kit:
QtyPkg Description Size 10Each White Heavy Weight Oil-Only Defender™ Pads 15″ x 19″ 2Each White Oil-Only Sorbent Socks 3″ x 4″ 1Pair Nitrile Gloves One Size 1Pair Safety Goggles One Size 2Each Yellow Temporary Disposal Bags 18″ x 30″ 1Each White Gallon Overpack 12″ dia. x 16.75″ with screw top lid (UN 1H2/Y1.5/30) Specifications Dimensions Weight in lbs Price 1011 69 1/2 x 6 1/2 x 3 1/4 11 $39.99 Pollution Control
Oil Eating Microbes
Removes Oil Contamination from surfaces Remove stains from concrete or asphalt surfaces, driveways, shop floors, oil storage areas, loading docks, fueling areas, pump islands, gas stations, parking lots, grease traps, equipment failures and more! Description Microbes eat hydrocarbons on the spot Eliminates fuel odor in minutes Turns oil into harmless carbon dioxide & water Solves oil contamination problems onsite Non-toxic & Non-hazardous Each pound treats 100 sq. Ft. 5 Year Shelf Life Works on: Gasoline • Diesel • Crude Oil • Lubricating Oil • Kerosene Animal Oils • Vegetable/Cooking Oils and Fats Additional information: How It Works: Microbes are housed in bentonite clay and there are 142 billion Microbes in every ounce of this bentonite clay. The bentonite clay immediately absorbs the oil & then when water is added, the microbes begin digesting the oil. The Microbes digest the light, odor causing ends of the oil first causing unpleasant odors to disappear in minutes. The end result becomes carbon dioxide, water and a beneficial fatty acid that is part of the food chain. Directions For Use: Sprinkle Oil Eating Microbes over the spill area & scrub with a stiff broom. Add water to activate the Microbes. For stains- let it sit for 15-20 minutes. For larger spills- remove excess oil & let sit until no oil is present. They will keep eating for several days, but the area must be kept moist for the Microbes to thrive. When they are done the surface is oil- free, and you can simply rinse the bentonite clay away. Storage: Store between 50° – 105°F (10° – 40°C). Avoid prolonged exposure to extreme temperatures. Specifications: Dimensions in ins Weight in lbs. Price 1021 10 x 5 x 4 2 $47.99 Pollution Control
Oil Only Absorbent Socks
Oil Absorbent Spill Dams absorb oil and repel water. Each Spill Dam is 3in in diameter and 4ft long, and can be used to wrap around spills and leaks to absorb and contain spilled liquids. Spill Dams can float on water and each dam can absorb 1 gallon of oil.
Description 3-inch diameter tube snakes around spills and leaks to absorb and contain fluids Wrap around leaky machinery, equipment or spilled liquids Can float on water & absorbs 1 Gallon of oil Specifications: Dimensions In Pack Weight in lbs. Price 1031-10 3" x 4' 10 26 $37.99
Oil Only Absorbent Pads Use Industrial Grade Absorbent Pads to absorb oil, fuel and gas. These universal fine fiber meltblown pads contain a chemical oil absorbent that repels water, antifreeze, drinks, urine and more. Each pad is 15in x 19in and 100 pads absorb up to 23 gallons.
Description Absorb leaks, spills and drips & keep areas clean Chemical oil absorbent for oil, fuel & gasoline 15in x 19in fuel only polypropylene absorbent mats Repels water, antifreeze, drinks, urine & more Place mats in & around leaky areas & equipment to soak up & remove Specifications: Dimensions in ins In Pack Weight in lbs. Price 1041-50 15 x 19 50 6 $36.49 1041-100 15 x 19 100 11 $67.99 Pollution Control
Ultra-Absorbent Tarps®
Catch and trap oil drips before they can reach the ground Use under machinery and equipment to catch fluid leaks during maintenance or repairs. Rolls or folds into a small package — store in vehicles for onsite repairs.
Keep floors free of oily mess — reduce slip hazards.
Three-layer system provides maximum protection:
1. Top layer: UV resistant geotextile fabric — allows oils to pass through.
2. Middle layer: Absorbent core — oil-only polypropylene traps oils but allows stormwater to evaporate.
3. Bottom layer: Impermeable backing keeps drips from leaching through to the ground or shop floor.
Helps comply with NPDES, 40 CFR 122.26 (1999).
Specifications: Dimensions Capacity Weight in feetin gallons in lbs Price 83055 x 5 3 3 $64.99 830610 x 10 12 12 $199.99 Pollution Control
Ultra-Concrete Washout Berms®
Economical and portable containment for concrete washout Cleaning your equipment properly after a project is a lot easier with the right Washout Berm. The Ultra- Concrete Washout Berm is a light-weight, portable way to collect harmful industrial concrete sediment, paint, drywall, mud, stucco and mortar from your work site. Its UV resistant, 10 mil polyethylene construction makes it durable for extended use.
Description:
Helps maintain EPA compliance
Unfolds for simple and quick set up in seconds.
Compatible with mixers, pump trucks, and wheelbarrows.
Built-in tie-downs allow berm to be secured to standard wooden pallets for easier handling and transport.
Dispose of after evaporation and job completion.
Specifications: Dimensions Capacity Weight in inches in gallons in lbs Price 3512 48 x 48 x 14 139 5 $129.99 Pollution Control
Ultra-Filter Pads
Capture oil, gas and other hydrocarbons while allowing clean rainwater to flow through Use Ultra-Filter Pads on construction sites, oil fields and other areas where spill containment is needed but shelters or structures are not available.
Polyethylene and PVC construction is lightweight but durable - folds for quick and easy storage or transport.
Replaceable Ultra-X-Tex liners quickly capture oil, grease and fuel leaks and spills. Allows clean water to pass through while filtering out any hydrocarbons. Two-inch, foam sidewalls provide structure and help contain stormwater during periods of quick or large amounts of rainfall - ensures Ultra-X-Tex has ample filtering time.
Specifications: Dimensions Capacity Weight in inchesin gallons in lbs Price 6540 30 x 24 x 3 0.8 3 $179.99 6541 42 x 30 x 3 1.5 5 $199.99 Pollution Control
Ultra-Pipe Socks® Control the flow of sediment and oil out of headwall and other types of pipes The Ultra-Pipe Sock is engineered using UltraTech’s Ultra-X-Tex, a durable geo-textile filter media that allows large volumes of water to pass through while absorbing liquid hydrocarbons including petroleum, animal and vegetable oils, and other liquid contaminants. This makes it a perfect material for filtering contaminants from a water source and controlling erosion.
Also great for pond applications where vertical pipes extend above the water surface and preventing sediment in-flow during high water events is required.
Compliance:
Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Specifications: Dimensions Capacity Weight in inchesin gallons in lbs Price 9705-OS8 x 60 1.7 2 $54.99 9706-OS12 x 60 2.6 3 $74.99 9707-OS16 x 60 3.5 3 $87.99 Pollution Control
Ultra-Utility Tray® Size: 12" x 48" x 4.75"
Keep messy drips and spills off the warehouse floor. Heavy-duty polyethylene construction - will not rust or corrode. Ribbed bottom keeps cans, pails and other containers elevated above any spills or leaks. Stackable for easy storage when not in use. Available in five sizes for a variety of applications.
Specifications:
Dimensions in inches Price 103112 x 48 x 4.75 $55.99 103224 x 48 x 4.75 $72.99 Site Monitoring
Ultra-Universal Sampler®
Sample water after it has been filtered by your catch basin insert without removing the grate
Proving the effectiveness of a stormwater management product usually requires testing. Showing that the pollutants in stormwater before it passes through the product are higher than it is after demonstrates the product is working.
But taking those samples can be challenging. The Ultra-Universal Sampler makes it easier.
Water sampling can now be done after your catch basin insert or other stormwater management device has filtered the effluent.
Helps meet regulatory sampling requirements.
Test the effectiveness of a new device or prove that your stormwater management products and procedures are working. A built-in pump draws collected water in cup and channels it through the attached hose into jars or containers so water can be tested.
Collection cup at end of device fits through most drains and overflow ports in catch basin inserts and other treatment products.
Unit disassembles for easy storage and shipping.
All PVC unit will not rust or corrode.
Specifications: Dimensions Weight in inches in lbs Price 924769 1/2 x 6 1/2 x 3 1/4 5 $189.99 Site Monitoring
Ultra-Sampling Kits®
Convenient, economical kit makes stormwater sampling quick and easy There are many different products that are designed to reduce the contaminants in stormwater... but how do you know that they are doing what they are supposed to?
If your goal is to capture paper cups and cigarette butts, that's easy to discern. But many pollutants that affect stormwater are not visible to the naked eye and cannot be measured without the appropriate equipment.
Kit includes everything needed for accurate measurement and testing of pH and turbidity levels.
Helps comply with NPDES sampling and monitoring requirements of individual permits.
Microprocessor based turbidity meter provides laboratory precision for field turbidity measurements.
pH meter has a water and dustproof housing and is designed for use in dirty and damp field conditions — ergonomically designed LCD allows measurements to be seen at a glance.
Kit includes:
Turbidity Meter Data Book pH Meter Lint-Free Wipes pH and Turbidity Meter Calibration Solution Nitrile Gloves Durable Case
Specifications: Dimensions Weight in inches in lbs Price 929715 x 11 x 5.5 5 $1,899.99 Storm Drain Protection
FlexStrom Catch-it Lite Filters The temporary and reusable solution.
The FLEXSTORM CATCH-IT system is the preferred choice for temporary inlet protection and storm water runoff control. FLEXSTORM CATCH- IT Inlet Filters will fit any drainage structure and are equipped with high efficiency filter bags. Whether you’re the specifier or the user, it’s clear to see how FLEXSTORM CATCH-IT Inlet Filters outperform the competition
Features:
Configurable: steel frames configured and guaranteed to fit ANY storm drainage structure
Adjustable: although shipped to fit your inlet, rectangular framing may be field adjusted in 1/2” increments if necessary Reusable: galvanized framing will last year after year in harsh conditions, while geotextile filter bags are easily replaced after several years of use Effective: works below grade; overflow feature allows streets to drain with full bag; third party testing results of the FX filter bag show 82% Affordable: low per-unit cost; installs in seconds; easily maintained with Universal Removal Tool (no machinery required) Benefits: Reduce jobsite flooding and keep projects running Minimize residential complaints with cleaner, dryer streets during all construction phases Significantly reduce cleanup costs Prevent siltation and pollution of rivers, lakes, and ponds Lowest cost alternative for the highest level of Inlet Protection Specifications: Dimensions in inches Price 601212 x 12 $49.99 6016 16 x 16 $49.99 601818 x 18 $49.99 6024 24 x 24 $49.99 636136 x 18 $54.99 636236 x 24 $54.99 636336 x 36 $54.99 648448 x 24 $59.99 Sacranmento Type B/J 6510 $54.99 San Francisco Horseshoe 6520 $124.99 Storm Drain Protection
Ultra-Drain Guard® Oil and Sediment model
Protect the water system from sediment and pollutants with Ultra-Drain Guard catch basin inserts The Ultra-Drain Guard is engineered to filter stormwater waste before it becomes a problem in the water system. As a storm drain filter, it removes contaminants like litter, sand, and oil from stormwater flow. Its geotextile fabric and easy installation make it ideal for industrial facilities, construction sites, and parking lots where stormwater runoff is likely to carry oil, eroded soil, debris, and fuel contaminants from cars.
Compliance:
Exceeds 80% sediment removal efficiency. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Stormwater Pollution Prevention Plans.
Installation:
Easily installed in most drains. To do it, simply raise the grate, place the Drain Guard over the opening, and carefully lower the grate back in place. As a final step, pinch the fabric in place to keep it secure. Specifications: Dimensions Performance Weight in inches cu. Ft in lbs Price 9217 48 x 36 x 18 0.87 2 $33.99 9356 60 x 60 x 18 1.55 2 $42.99 PLUS 9219 48 x 36 x 18 1.38 2 $41.99 9358 60 x 60 x 18 2.06 3 $59.99 Storm Drain Protection
Drainiac Under-Grate Filter System Oil and Sediment model
Heavy-duty fiberglass reinforced plastic grating for holding the Drainiac filter in place. Won’t corrode or rust, while being strong enough to hold the weight of the filter and all the sediment.
Spilltration® Husky filtration layer for removing oils, fuels, sheens and sediments.
Raised center for capturing crap during higher flow situations.
Overflow port, to prevent water from backing up, in a heavy rain event.
Product Specifications Substance Filtered: Oils, Sediments, Debris and Trash Dimensions: Custom For Drain Sizes: All Overflow Hole Size: 6” x 6” Recycled Content: Spilltration® Husky fibers are 100% recycled content. UV Resistant: Yes
Specifications: Dimensions in inches Weight in lbs. Price 733030" x 30" (Drain Size: 24" x 24") 2 $119.00 734230" x 42" (Drain Size: 24" x 36") 4 $136.00 735430" x 54" (Drain Size: 24" x 48") 4 $146.00 734848" x 48" (Drain Size: 42" x 42") 5 $229.00 Storm Drain Protection
Ultra-Drain Seals®
Stop spills from going down the drain
The Ultra-Drain Seal is a valuable addition to any emergency response plan, spill kit or stormwater management program.
This storm drain cover is constructed with a flexible, non-absorbing material and reinforced tear-resistant mesh, the pad is designed to quickly and effectively seal a drain in an emergency.
Key Features:
Both sides are designed to effectively seal most drains (no top or bottom).
Resists oil, water, and most aggressive chemicals, cleans with soap and water.
Mesh interior is sandwiched between layers of polyurethane, which increases durability and gives it the flexibility to deform and seal off most drains.
Specifications: Dimensions Weight in insin lbs Price 212618 x 18 x 3/8 5 $87.99 212724 x 24 x 3/8 9 $133.99 213036 x 36 x 3/8 20 $277.99 213142 x 42 x 3/8 23 $349.99 2132 48 x 48 x 3/8 33 $479.99 2133 54 x 54 x 3/8 41 $545.99 2124 18 x 58 x 3/8 15 $306.99 2125 36 x 58 x 3/8 30 $514.99 Storm Drain Protection
FlexStorm® Grate Removal Tool
The FlexStorm Grate Removal Tool allows you to easily remove and replace inlet grates for easy, efficient installation and maintenance. For heavier grates, using the Universal Removal Tool with two people is recommended.
Specifications: Price 6810 $129.99
Ultra-Grate Hooks® Lift storm drain grates safely and protect hands from injury
Storm drain grates are heavy. Some heavier than others. After all, most of them are designed to be driven over. But whether, it's the smaller, more manageable grates of the Pacific Northwest or the monsters that we see in Florida, it's smart to take caution when lifting them.
Don't try to "manhandle" them. Sooner or later, that's going to end in injury. A simple yet effective tool like the Ultra-Grate Hook is the solution. Just hook the grate and lift it out using your legs and not your back. You'll also keep your fingers wrapped around the Grate Hook's handle. Far away from that heavy grate and the carnage they're known to inflict.
Key Features: Heavy-duty steel hook fits all grates 26" length and handle make lifting easier - helps prevent back and other injuries.
Portable and compact for easy storage / transport. Specifications: Price 9235 $29.99 Storm Drain Protection
FlexStorm Open Throat Inlet Filters
Installation and Maintenance Instructions. 1. Enter manhole opening with inlet filter and mounting hardware. 2. Align filter frame with curb opening and mark centerline of each frame hanger bracket. 3. Using supplied wall mount brackets, mark location of bracket screw holes spaced 1” down from top ledge of concrete. 4. Using hammer drill, drill hole to recommended depth of specified fastener. 5. Secure the wall mount brackets using concrete fasteners and hang the FlexStorm™ inlet assembly. 6. For maintenance lift the filter frame off mounting brackets and carry up through manhole opening alternatively service with truck mounted vacuum.
Specifications: Dimensions in inches Price 672424 $249.99 673636 $249.99 674848 $324.99 Storm / Flood Protection
Water Activated Flood Barriers
Protect against: Storm surges & water main breaks Overflowing appliances & equipment Leaking equipment & water tanks Broken sprinkler heads A/C Condensation overflow Spills, leaks, floods, drips & more
• Just get them wet • Grows to full size of 3.5in high in 10 minutes • Contains a super absorbent powder that swedlls and gels water • Swelled barriers contain, control, and divert flood water • No need for sand or labor filling product • Available in 5ft, 10ft or 17ft lengths • Absorbs 4 gallons, 8 gallons & 13.5 gallons of water, respectively
Specifications Weight Product Type Quantity in lbs Price 1224-6Quick Dam Flood Bags 12" x 24" 6 4 $39.99 1224-10Quick Dam Flood Bags 12" x 24" 10 6 $64.99 1224-20Quick Dam Flood Bags12" x 24" 20 14 $124.99 1224-120Quick Dam Flood Bags 12" x 24" 120 69 $719.99 1248-25Quick Dam Jumbo Flood Bags 12" x 48" 25 35 $329.99 1265-4Quick Dam 5' Flood Barriers 4 3 $49.99 1265-26Quick Dam 5' Flood Barriers 26 21 $309.99 1610-12Quick Dam 10' Flood Barrier 12 20 $289.99 1617-8Quick Dam 17' Flood Barrier 8 23 $304.99 Storm / Flood Protection
Quicks Kits
Designed for Quick Deployment Buckets Variety of Indoor & Outdoor Configurations Water Tight Screw Top Lid Clearly Marked FLOOD CONTROL Refills Available Duffel Bag Kits Outdoor Configurations Carry Strap Handle Included Refills Available
Specifications
Weight Buckets in lbs Price 1005-10Grab & Go - 50' Barrier (10- 5ft's) 14 $139.99 1010-5Grab & Go - 50' Barrier (5- 10ft's) 14 $139.99 1011-1Grab & Go - Combo (5- 5ft's & 10 FB's) 16 $139.99 1011-20Grab & Go- Flood Bags (20) 18 $139.99 1248-5Grab & Go Jumbo 4ft Flood Bags (5) 12 $89.99 1222-1Grab & Go: 20 Mats, 10 Drip Mats & 10 4ft Water Dams 10 $84.99 Duffel Bags 1054-14Quick Dam 5' Duffel Bag Kit 14/Bag 12 $199.99 1010-7Quick Dam 10' Duffel Bag Kit 7/Bag 12 $199.99 1017-4Quick Dam 17' Duffel Bag Kit 4/Bag 12 $189.99 1017-34Quick Dam FB Duffel Bag Kit 34/Bag 28 $234.99 Storm / Flood Protection
Liquid Lock - 5 Gallon Bucket
Solidify slurry or contaminated soil for proper transport & disposal • Super absorbent powder expands & solidifies water solutions • Absorbs up to 500 times its volume • Blend with fluid & in minutes it turns solid • Helps pass Paint Filter Test & TCLP • Treats 770 gallons.
Ideal for dealing with Concrete & Stucco washout leaks.
Specifications Weight in lbs. Price 1041 8 159.99 Personal Protection Equipment
Kong USA Safety Helmet
Part #: Color Price 3001O Orange $80.99 3001R Red $80.99 3001W White $80.99 3001Y Yellow $80.99 Plus Shipping & Tax
New Professional Shock-Absorbing Helmet.
Conforms to ANSI Z89.1-2009 and CE EN 397. Comfortable and well-ventilated interior that also guarantees a perfect fit. Removable and washable padding.
Visor and headphones can be mounted using the integrated clasp on the shell.
Equipped with 4 durable clips for mounting headlamps.
UNI Size, just 385g!
OSHA Guideline. §1926.100 Head protection. (a) Employees working in areas where there is possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.
(b) Helmets for the protection of employees against impact and penetration of falling and flying objects shall meet the specifications contained in American National Standards (c) Helmets for the head protection of employees exposed to high voltage electrical shock and burns shall meet the specifications contained in American National Standards Institute, Z89.2-1971. Personal Protection Equipment Noise Reduction Earmuffs
Part #: dB Color Price 3010 32 Red $76.99 3011 30 Yellow $67.99 3012 26 Green $47.99 3013 32 Yellow Fluo $88.99 3014 36 Black $98.99 3015 26 Orange $49.99 3016 32 Orange $88.99 Plus Shipping & Tax
Noise reduction 3M Peltor® earmuffs available in 7 versions with different levels of acoustic insulation and colors.
Visor
Part #: Price 3031 Clear $55.99 3030 Smoky $59.99 Plus Shipping & Tax
Extremely robust and resistant to ultraviolet rays, corrosion and fogging.
The included mounting kit is easily mountable on Mouse and Spin helmets thanks to the pre-marked holes in the shell.
Conform to CE EN 166 anti-fog and anti-scratch. The anti-fog treatment is both internal and external.
Bluetooth
Part #: Price 3020 $206.99 Plus Shipping & Tax
Bluetooth communication system applicable in just a few seconds to any Peltor® hearing protection.
Allows you to convert a normal hearing protection in a practical communication system that can be connected via Bluetooth to your phone, to be able to talk comfortably while maintaining a high soundproofing.
Up to 8 hours of battery life. Cervelliere Limited
Mailling address: PO Box 1052 Danville, CA 94526
Email: [email protected] Online: www.cervelliere.com/shop Phone: 925-240-3575