Original BMW Accessories. Installation Instructions

Original BMW Accessories. Installation Instructions.

BMW Apps Retrofit (SA 6NR) BMW 1 Series (E 81, E 82, E 87, E 88) built after 3/2011 BMW 3 Series (E 90, E 91, E 92, E 93) built after 3/2011 BMW 5 Series (F 07, F 10, F 11, F 18) built after 3/2011 BMW 6 Series (F 12, F 13) built after 3/2011 BMW 7 Series (F 01, F 02, F 03, F 04) built after 3/2011 BMW X1 (E 84) built after 3/2011 BMW X3 (F 25) built after 4/2011 BMW X5 (E 70) built after 4/2011 BMW X6 (E 71, E 72) built after 4/2011 BMW Z4 (E 89) built after 3/2011

Only for cars with SA 602/SA 609 and SA 633/SA 639/SA 644/SA 6NK/SA 6NL and SA 6NF, for detailed instructions on special equipment, see EPC.

Retrofit kit number 61 12 2 295 390 BMW Apps retrofit cable

Installation time The installation time for cars - E70, E71, E72, F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 is approx. 2.0 hours, -F25 approx. 1.5 hours, - E81, E82, E87, E88, E90, E91, E92, E93 approx. 1.25 hours, - E84, E89 approx. 1.0 hours. This may vary depending on the condition of the car and the equipment in it. The installation time specified does not include the time spent on programming/coding. The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs (no invoicing via warranty).

Important information These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge. All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety regulations.

© BMW AG, Munich 01 29 2 295 713 6/2012 (Z/Z) 1 If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for mechanical work and 1.0 hour for electrical work. To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts support team via the Aftersales Assistance Portal (ASAP). Quote the following information: - Chassis number, - retrofit kit part number, - a detailed description of the problem, - any work already carried out. Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP!

Pictograms Denotes instructions that draw your attention to dangers. !

Denotes instructions that draw your attention to special features.

Denotes the end of the instruction or warning text.

Installation information Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties. All pictures show LHD cars; proceed accordingly on RHD cars. Program/encode the “BMW Apps” retrofit with ISSS (Integrated Software Service Station) via the – Conversions – path.

Differentiating feature for the CIC and head unit high The different radio receivers mean that the connection of branches A4–A6 differs. The head unit high has an additional 12-pin black plug (2) which the CIC doesn't.

Head unit high CIC

1 1

010 0190 Z 010 0189 Z

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. For a detailed description, see the vehicle-specific section “Connecting to the radio receiver ...”.

© BMW AG, Munich 01 29 2 295 713 6/2012 (Z/Z) 2 Ordering instructions The following parts are not supplied with the retrofit kit and must therefore be ordered separately (see EPC for part number and details): - Unlocking code - Media snap-in adapter

List of special equipment The following special equipment must be taken into consideration when installing: SA 601 TV reception SA 696 DVD changer SA 6FH Rear seat entertainment SA 6UK Night vision camera

Special tools required 00 9 317, Installation wedges

Section Page 1 Parts list ...... 5

2 Preparatory work ...... 6

3 Connection diagram for cars with CIC ...... 7

4 Connection diagram for cars with head unit high...... 8

5 Installation and cabling diagram ...... 9

6 Connecting to the baseplate ...... 10

7 Connecting to the radio receiver on cars with CIC F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 ...... 11

8 Connecting to the radio receiver on cars with head unit high F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 ...... 12

9 Connecting to the radio receiver on cars with CIC F25 ...... 14

10 Connecting to the radio receiver on cars with head unit high F25...... 15

11 Connecting to the radio receiver on cars E70, E71, E72...... 16

12 Connecting to the radio receiver on cars E81, E82, E84, E87, E88, E89, E90, E91, E92, E93 ...... 17

13 Concluding work and coding ...... 18

14 Wiring diagram for cars with CIC...... 19

15 Wiring diagram for cars with head unit high ...... 20

A B

010 0173 Z

Legend

A Retrofit cable B Cable tie (5 x)

ISTA No. Conduct a brief test – – – Disconnect the negative pole of the battery 12 00 ...

First, the following components must be removed

Only cars F01, F02, F03, F04, F07, F10, F11, F12, F13, F18, F25 Radio receiver 65 11 080 Centre console finisher 51 16 160 Centre arm rest storage compartment 51 16 172 Baseplate (only F01, F02, F03, F04, F07, F10, F11, F25) 84 10 705 Baseplate (only F12, F13, F18) 84 10 700 Check whether video switch is installed (only F01, F02, F03, F04, F07, F10, F11, F12, F13, 65 50 025 F18)

Only cars E70, E71, E72 Radio receiver 65 11 080 Decorative finisher on the left centre console 51 16 225 Side carpet on the left storage compartment 51 16 ...

E90, E91, E92, E93 cars only Radio receiver 65 11 080 Storage compartment finisher 51 16 212 Folding gaiter for parking brake lever 34 41 ...

E84 cars only Radio receiver 65 11 080 Finisher on rear storage compartment 51 16 ... Storage compartment finisher 51 16 212

E81, E82, E87, E88 cars only Radio receiver 65 11 080 Finisher on rear storage compartment 51 16 ... Oddments box 51 16 200

E89 cars only Radio receiver 65 11 080 Entire centre console 51 16 165

A A1 A4 A2 A5 A3 A6

010 0174 Z

Item Designation Signal Cable colour/ Connection location in the car Abbreviation/slot cross-section A Retrofit cable ------A1 Pin contact FBAS+ GE To the baseplate isolating plug X4545/X29*1S 0.35 mm² PIN 6 A2 Pin contact FBAS- WS To the baseplate isolating plug X4545/X29*1S 0.35 mm² PIN 7 A3 Pin contact FBAS shield Shield To the baseplate isolating plug X4545/X29*1S 0.35 mm² PIN 15

A4 Socket contact FBAS+ GE To radio receiver X13812/A42*1B 0.35 mm² PIN 18/19/21* A5 Socket contact FBAS- WS To radio receiver X13812/A42*1B 0.35 mm² PIN 28/26/24* A6 Socket contact FBAS shield Shield To radio receiver X13812/A42*1B 0.35 mm² PIN 27/25/23*

* Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. For a detailed description, see the vehicle-specific section “Connecting to the radio receiver ...”. If the section “Connecting the radio receiver ...” does not contain a particular special equipment constellation, branches A4–A6 must be connected to the first vacant input. If all three video inputs on the radio receiver are occupied, the “BMW Apps” retrofit (SA 6NR) cannot be installed.

Input 1 - FBAS+, GE cable, PIN 18 - FBAS-, WS cable, PIN 28 - FBAS shield, PIN 27

Input 2 - FBAS+, GE cable, PIN 19 - FBAS-, WS cable, PIN 26 - FBAS shield, PIN 25

Input 3 - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

A A1 A4 A2 A5 A3 A6

010 0174 Z

A4 Socket contact FBAS+ GE To radio receiver A42*1B/A42*3B 0.35 mm² PIN 21/28/7/8* A5 Socket contact FBAS- WS To radio receiver A42*1B/A42*3B 0.35 mm² PIN 24/27/2/3* A6 Socket contact FBAS shield Shield To radio receiver A42*1B/A42*3B 0.35 mm² PIN 23/26/1/9*

Input 1, plug A42*1B (SW 40-pin) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Input 2, plug A42*1B (SW 40-pin) - FBAS+, GE cable, PIN 28 - FBAS-, WS cable, PIN 27 - FBAS shield, PIN 26

Input 3, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 7 - FBAS-, WS cable, PIN 2 - FBAS shield, PIN 1

Input 4, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 8 - FBAS-, WS cable, PIN 3 - FBAS shield, PIN 9

1 A 2

010 0175 Z

A Retrofit cable

1 Radio receiver, plug X13812, A42*1B or A42*3B 2 Baseplate, plug X4545 or X29*1S

The installation and connection process is demonstrated using the E70 model as an example. Proceed similarly with all other models.

A4-A6 Connect branches A1–A3 as follows to the isolating plug of baseplate X4545 or A27*1S: - Branch A1, GE cable, to PIN 6 - Branch A2, WS cable, to PIN 7 A1-A3 - Branch A3, shield, to PIN 15

Route branches A4–A6 to the radio receiver. X4545/ X29*1S 010 0176 Z

© BMW AG, Munich 01 29 2 295 713 6/2012 (Z/Z) 10 7. Connecting to the radio receiver on cars with CIC F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 Before connection to the radio receiver, check whether a video switch is installed in the car (see section “Preparation”).

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver A42*1B.

A4-A6

A42*1B 010 0177 Z

If there is subsequently a special equipment constellation missing, branches A4–A6 must be connected to the first vacant input. If all three video inputs on the radio receiver are occupied, the “BMW Apps” retrofit (SA 6NR) cannot be installed.

Only cars with night vision camera (SA 6UK) and DVD changer (SA 696) but without further video source - FBAS+, GE cable, PIN 18 - FBAS-, WS cable, PIN 28 - FBAS shield, PIN 27

Only cars without night vision camera (SA 6UK) - FBAS+, GE cable, PIN 19 - FBAS-, WS cable, PIN 26 - FBAS shield, PIN 25

Only cars with video switch, night vision camera (SA 6UK) and DVD changer (SA 696) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Only cars with video switch, rear-seat entertainment (SA 6FH) and night vision camera (SA 6UK) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Only cars without video switch but with night vision camera (SA 6UK) and a further video source (other than DVD changer SA 696) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

© BMW AG, Munich 01 29 2 295 713 6/2012 (Z/Z) 11 8. Connecting to the radio receiver on cars with head unit high F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 Before connection to the radio receiver, check whether a video switch is installed in the car (see section “Preparation”).

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver A42*1B or A42*3B.

A4-A6 A42*3B A42*1B 010 0192 Z

If there is subsequently a special equipment constellation missing, branches A4–A6 must be connected to the first vacant input.

Only cars with: - night vision camera (SA 6UK) and DVD changer (SA 696) and TV reception (SA 601) but without rear-seat entertainment (SA 6FH)

Input 1, plug A42*1B (SW 40-pin) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Only cars: - with DVD changer (SA 696) and TV reception (SA 601) but without rear-seat entertainment (SA 6FH) or - with rear view camera (SA 3AG/SA 3AH) and DVD changer (SA 696) and TV reception (SA 601) but without rear-seat entertainment (SA 6FH)

Input 2, plug A42*1B (SW 40-pin) - FBAS+, GE cable, PIN 28 - FBAS-, WS cable, PIN 27 - FBAS shield, PIN 26

Only cars: - with TV reception (SA 601) or - with rear view camera (SA 3AG/SA 3AH) and night vision camera (SA 6UK) and TV reception (SA 601) or - with rear view camera (SA 3AG/SA 3AH) and TV reception (SA 601) or - with night vision camera (SA 6UK) and TV reception (SA 601)

Input 3, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 7 - FBAS-, WS cable, PIN 2 - FBAS shield, PIN 1

© BMW AG, Munich 01 29 2 295 713 6/2012 (Z/Z) 12 8. Connecting to the radio receiver on cars with head unit high F01, F02, F03, F04, F07, F10, F11, F12, F13, F18 Only cars: - with rear-view camera (SA 3AG/SA 3AH) or - with night-vision camera (SA 6UK) or - with DVD changer (SA 696) or - with rear-view camera (SA 3AG/SA 3AH) and night vision camera (SA 6UK) or - with rear-view camera (SA 3AG/SA 3AH) and DVD changer (SA 696) or - with night vision camera (SA 6UK) and DVD changer (SA 696) or - with rear-view camera (SA 3AG/SA 3AH) and night vision camera (SA 6UK) and DVD changer (SA 696) or - with DVD changer (SA 696) and TV reception (SA 601) and rear-seat entertainment (SA 6FH) or - with rear-view camera (SA 3AG/SA 3AH) and DVD changer (SA 696) and TV reception (SA 601) and rear-seat entertainment (SA 6FH) or - with night vision camera (SA 6UK) and DVD changer (SA 696) and TV reception (SA 601) and rear-seat entertainment (SA 6FH) or - with rear-view camera (SA 3AG/SA 3AH) and night vision camera (SA 6UK) and DVD changer (SA 696) and TV reception (SA 696) or - no other video source or - all cars with VSW

Input 4, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 8 - FBAS-, WS cable, PIN 3 - FBAS shield, PIN 9

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver A42*1B.

A4-A6

A42*1B 010 0177 Z

Only cars without TV reception (SA 601) - FBAS+, GE cable, PIN 19 - FBAS-, WS cable, PIN 26 - FBAS shield, PIN 25

Only cars with TV reception (SA 601) but without DVD changer (SA 696) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Only cars with TV reception (SA 601) and DVD changer (SA 696) - FBAS+, GE cable, PIN 18 - FBAS-, WS cable, PIN 28 - FBAS shield, PIN 27

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver A42*1B or A42*3B.

A4-A6 A42*3B A42*1B 010 0192 Z

If there is subsequently a special equipment constellation missing, branches A4–A6 must be connected to the first vacant input.

Only cars: - with DVD changer (SA 696) and TV reception (SA 601) or - with rear-view camera (SA 3AG/SA 3AH) and DVD changer (SA 696) and TV reception (SA 601)

Input 2, plug A42*1B (SW 40-pin) - FBAS+, GE cable, PIN 28 - FBAS-, WS cable, PIN 27 - FBAS shield, PIN 26

Only cars: - with TV reception (SA 601) or - with rear view camera (SA 3AG/SA 3AH) and TV reception (SA 601) or

Input 3, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 7 - FBAS-, WS cable, PIN 2 - FBAS shield, PIN 1

Only cars: - with rear-view camera (SA 3AG/SA 3AH) or - with DVD changer (SA 696) or - with rear-view camera (SA 3AG/SA 3AH) and DVD changer (SA 696) or - no other video source or

Input 4, plug A42*3B (SW 12-pin) - FBAS+, GE cable, PIN 8 - FBAS-, WS cable, PIN 3 - FBAS shield, PIN 9

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver X13812.

A4-A6

X13812 010 0178 Z

Only cars without TV reception (SA 601) - FBAS+, GE cable, PIN 18 - FBAS-, WS cable, PIN 28 - FBAS shield, PIN 27

Only cars with TV reception (SA 601) but without DVD changer (SA 696) - FBAS+, GE cable, PIN 19 - FBAS-, WS cable, PIN 26 - FBAS shield, PIN 25

Only cars with TV reception (SA 601) and DVD changer (SA 696) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

Depending on the special equipment fitted to the car, the pinning on the radio receiver varies. Connect branches A4–A6 according to the following configuration to radio receiver X13812.

A4-A6

X13812 010 0178 Z

If there is subsequently a special equipment constellation missing, branches A4–A6 must be connected to the first vacant input.

Only cars without TV reception (SA 601) - FBAS+, GE cable, PIN 18 - FBAS-, WS cable, PIN 28 - FBAS shield, PIN 27

Only cars with TV reception (SA 601) - FBAS+, GE cable, PIN 21 - FBAS-, WS cable, PIN 24 - FBAS shield, PIN 23

The retrofit system requires coding.

Ordering and delivery of FSCs - FSCs are “coded stock parts”, i.e. FSCs are always generated on a vehicle-specific basis and must therefore be ordered from BMW as an FSI part specifying the chassis number. - FSCs are supplied in the BMW After Sales Portal (ASAP) under Parts and Accessories (Sweeping Technologies). The retail organisations can download the FSCs onto their PC via Internet downloads.

- Connect the battery - Encode the “BMW Apps” retrofit with ISSS (Integrated Software Service Station) via the – Conversions – path - Conduct a brief test - Re-assemble the car appropriately - Insert the media snap-in adapter according to the car's owner's manual

6 7 15 X4545/ 6 7 15 X29*1S A1* A2* A3*

FBAS-

Schirm

FBAS+

GE WS Schirm 0,35 0,35 0,35

X13812/ A4* A5* A6*

FBAS+ FBAS- Schirm

A42*1B 18/19/21 28/26/24 27/25/23

A42*

010 0179 Z

Legend

A1*–A3* To the isolating plug on baseplate X4545 or X27*1S A4*–A6* To radio receiver A42, plug X13812 or A42*1B

All the designations marked with an asterisk (*) apply only to these installation instructions or this wiring diagram.

Cable colours

BL Blue GR Grey RT Red BO Bordeaux (Burgundy) L-GN Light green SW Black BR Brown NT Natural TR Transparent GE Yellow OR Orange VI Violet GN Green RO Pink WS White

6 7 15 X29*1S 6 7 15 A1* A2* A3*

FBAS-

Schirm

FBAS+

GE WS Schirm 0,35 0,35 0,35

A42*1B/ A4* A5* A6*

FBAS+ FBAS- Schirm

A42*3B 7/8 2/3 1/9

A42*

010 0191 Z

Legend

A1*–A3* To the isolating plug of baseplate X27*1S A4*–A6* To radio receiver A42, plug A42*1B or A42*3B

All the designations marked with an asterisk (*) apply only to these installation instructions or this wiring diagram.

Cable colours

BL Blue GR Grey RT Red BO Bordeaux (Burgundy) L-GN Light green SW Black BR Brown NT Natural TR Transparent GE Yellow OR Orange VI Violet GN Green RO Pink WS White