BMW G11/G12 7-Series
Total Page:16
File Type:pdf, Size:1020Kb
The All New BMW 7 Series bmw.com.au THE ALL NEW BMW 7 SERIES. SPECIFICATION GUIDE. MODELS. Transmission Cylinder / Power / Combined fuel Acceleration Capacity Torque consumption 0-100km/h cm3 l/100km Petrol Models 8-speed sports 6-cylinder 240 kW 740i 7.0 5.5 sec automatic 2,998 450 Nm 8-speed sports 6-cylinder 240 kW 740Li 7.0 5.6 sec automatic 2,998 450 Nm 8-speed sports 8- cylinder 330 kW 750i tbc tbc sec automatic 4,395 650 Nm 8-speed sports 8-cylinder 330 kW 750Li tbc tbc sec automatic 4,395 650 Nm Diesel Models 8-speed sports 6-cylinder 195 kW 730d 4.9 6.1 sec automatic 2,993 620 Nm BMW recommends the use of RON 95 super unleaded petrol. Unleaded 91 RON and higher with a maximum ethanol content of 10% (E10) may also be used. Output and fuel consumption figures apply to RON98 fuel. All engines meet the EU5 emissions standard. Fuel consumption is determined in accordance with the ECE driving cycle (93/116/EU), which consists of approximately one third urban traffic and two thirds extra-urban driving (based on the distance covered). CO2 emissions are measured in addition to fuel consumption. Optional equipment (e.g. wider tyres) can have a significant impact on fuel consumption. ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (22 October 2015), the information is general in nature only. Product features, specifications, models and prices are subject to change without notice. The general information in these materials should always be read in conjunction with information from authorised BMW dealers. To the extent permitted by law, BMW Group Australia excludes all express and implied warranties or guarantees and all liability, whether direct, indirect, special or consequential, arising from negligence or otherwise relating to the use of these materials, any inaccuracies and for any non-compliance by any vehicle with any representation, illustration, specification, description, product feature, colour, or other information contained in these materials. © BMW Australia Ltd (ABN 11 004 675 129) (“BMW Group Australia”) and BMW AG, Munich/Germany. All rights reserved. 2 STANDARD EQUIPMENT. 730d 740i 740Li 750i 750Li Transmission and technology Adaptive 2-axle air suspension, with automatic self-levelling suspension, manual raising up to 35 km/h by 20 mm, automatic lowering from 120 km/h by 10 mm Automatic Start/Stop function, reduces fuel consumption by switching off the engine when the vehicle comes to a temporary stop 8-speed automatic transmission with Steptronic, gearshift paddle switches on the steering wheel BMW Display key, features LCD colour display incl. touch control panel, Display option of vehicle status information (e.g. fuel gauge and range, service information, vehicle locking, etc.) BMW TwinPower Turbo inline 6-cylinder diesel engine, combines common rail direct injection and a turbocharger with variable turbine geometry BMW TwinPower Turbo inline 6-cylinder petrol engine, combines one TwinScroll turbocharger with Valvetronic, Double VANOS and High Precision Injection BMW TwinPower Turbo 8-cylinder petrol engine, combines two turbochargers with Valvetronic, Double VANOS and High Precision Injection Brake Energy Regeneration, indicator for brake energy recovery in the instrument cluster Brake-pad wear indicator Condition Based Service, inspections are scheduled to suit the way in which the car is driven Diesel particle filter Double-wishbone front axle, aluminium with trailing arm and control arm, rack-and-pinion steering Driving Experience Control, with setting for SPORT+, SPORT, COMFORT, COMFORT+, ECO PRO and ADAPTIVE modes. ADAPTIVE mode is an intelligent driving mode that automatically supports a more sporty or comfortable driving style in accordance with individual driving behaviour. ADAPTIVE mode is shown predicatively with navigation assistance. When approaching a bend, for example, a sporty driving for DDC, steering and gears is selected according to speed. ECO PRO mode for Driving Experience Control, enables individual adjustment of propulsion and chassis and suspension components (e.g. DSC) and activation of the ECO PRO mode, which employs consumption-oriented setup to help economise fuel consumption. Information output in the instrument cluster supports a consumption-optimised style of driving. Includes coasting function Executive Drive Pro, combines comfortable suspension alignment with dynamic driving characteristics. Driving comfort is further increased through combination with the Dynamic Damper Control and the integration of additionally available information from driving style analysis and camera projection data. Integral rear axle Oil sensor for level and grade, electronic assessment of oil quality and oil level Parking brake with automatic hold function, electromechanical, activated or deactivated by parking-brake switch in centre console Servotronic, servo assistance is optimised at all speed ranges, (e.g. minimum effort required at parking speeds). Includes electric power steering. ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (22 October 2015), the information is general in nature only. Product features, specifications, models and prices are subject to change without notice. The general information in these materials should always be read in conjunction with information from authorised BMW dealers. To the extent permitted by law, BMW Group Australia excludes all express and implied warranties or guarantees and all liability, whether direct, indirect, special or consequential, arising from negligence or otherwise relating to the use of these materials, any inaccuracies and for any non-compliance by any vehicle with any representation, illustration, specification, description, product feature, colour, or other information contained in these materials. © BMW Australia Ltd (ABN 11 004 675 129) (“BMW Group Australia”) and BMW AG, Munich/Germany. All rights reserved. 3 STANDARD EQUIPMENT. 730d 740i 740Li 750i 750Li Safety Active headrests, front, automatic triggering of the headrests in the event of a crash, to reduce whiplash Airbags: driver and front passenger airbags, seat occupancy detector for front passenger airbag; head airbags in the front and rear; side airbags for driver and front passenger Active Protection, safety package for initiating protective measures for the occupants if an accident situation is imminent: belt tensioning, windows are closed, sliding sunroof is closed, backrests of passenger seat and rear seats are positioned, automatic braking after crash. Including Attentiveness assistant Brakes: disc brakes at the front and rear, inner-vented Carbon Core, innovative lightweight construction with highly rigid and light carbon elements in the passenger cell area Central locking with electronic immobiliser, crash sensor; fuel tank filler cap integrated with central locking Dynamic braking lights, flashing brake lights and hazard indicator under extreme braking Dynamic Stability Control (DSC) incl. Anti-lock Braking System (ABS), Cornering Brake Control (CBC), Dynamic Traction Control (DTC) and Brake Assist ISOFIX child seat mounting, in the rear for the two outer seats. Safety body shell: bumper system with deformation zones at the front and rear, easily-replaceable deformation elements capable of absorbing impacts at speeds up to 15km/h; side impact protection, active bonnet Seat belts: 3-point seat belts and belt force limiter for all rear seats; 3-point seat belts in the front with pyrotechnical belt tensioner and belt force limiter Warning triangle and first aid kit Wheels and tyres 19” BMW light-alloy wheels, Double-spoke styling 630, 8.5 J × 19 “ with 245/45 R 19 run-flat safety tyres 20” BMW light-alloy wheels, W-spoke styling 646, Front: 8.5 J x 20” with 245/40 R 20, Rear: 10 J × 20 / tyres 275/35 R 20 with run-flat safety tyres. Snow chains cannot be fitted Locking wheel bolts Run-flat safety tyres incl. run-flat indicator Exterior design Air breather, with chrome strip on vehicle side Bumpers, with Chrome trim strips front and rear decorative bumper moulding incl. additional chrome finisher for tailpipe finishers Brakes design, black anodised brake callipers with BMW designation for front and rear axle Exhaust pipe, chrome finished, single, lozenge-shaped, left and right Exhaust pipe, chrome finished, dual, lozenge-shaped, left and right Exterior Design Pure Excellence, with chrome rear decorative bumper moulding incl. additional chrome finisher for tailpipe finishers, kidney struts in silver with strut front in chrome Metallic paintwork Ornamental front grille, kidney struts in silver with strut front in chrome. Includes Active Air Stream kidney grille with visible air damper control. ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (22 October 2015), the information is general in nature only. Product features, specifications, models and prices are subject to change without notice. The general information in these materials