Pin Vises ools T p

91 Tap ho S

The 91 Tap Wrenches are strong and well proportioned. They are nicely finished and the gripping surfaces are properly tempered. They will firmly hold or round shanks. They are plunger operated by 93 T-Handle Tap Wrenches knurled sleeve – the spring inside the sleeve causes plunger to back off when pressure is removed.

The 93 T-Handle Tap Wrenches are for holding taps, , recision and other small to be turned by hand. They are properly heat NOTE: Round shanks can be gripped, but care must be used. Excessive pressure may break the P treated to withstand ordinary shop use. The jaws conform to the moveable V-jaw. being held, making it rigid and less apt to loosen.

The 93D, E and F sizes are identical in construction to the 93A, B and C models, except that the bodies are proportionately longer. These longer tap wrenches are very handy in machine, automobile service and aviation repair shops because they eliminate the need for stocking special long taps for depths which cannot be reached with shorter wrenches. 174 Tap Features This is a well-designed tap wrench, ideal for holding smaller diameter • Sliding handle is frictionally held, permitting the handle to be taps, drills, reamers and other tools up to 1/4" (6.35mm) in diameter. removed or positioned • Can be aligned using a center or upright machine It will firmly grip round or square shanks. It is lightweight, well to ensure a straight tap proportioned, and the gripping surface is properly heat treated.

NOTE: These tools are designed to hold square shanks. Round shanks can be gripped, but care must be used. Excessive tightening may break the binding nut.

93 T-Handle Tap Wrenches Capacity Tap Size Square Shank Body Length Inch mm Inch mm Inch mm Cat. No. EDP 1/16-3/16 1.6-4.7 1/16-5/32 1.6-4 2 50 93A 50427 7/32-7/16 5.5-11 5/32-1/4 4-6.4 2-1/2 65 93B 50428 1/4-1/2 6.4-12.7 3/16-5/16 4.7-8 3-1/2 90 93C 50429 1/16-3/16 1.6-4.7 1/16-5/32 1.6-4 6 150 93D 50430 7/32-7/16 5.5-11 5/32-1/4 4-6.4 10 250 93E 50431 1/4-1/2 6.4-12.7 3/16-5/16 4.7-8 13 330 93F 50432 91 Tap Wrenches 1/16-1/4 1.6-6.35 3/32-5/32 2.4-4 6 150 91A 50419 3/16-1/2 4.7-12.7 5/32-9/32 4-7 9 225 91B 50420 1/4-5/8 6.35-16 5/32-3/8 4-9.5 12 300 91C 50421 5/16-3/4 8-19 13/64-7/16" 5.2-11 16 400 91D 50422 174 Tap Wrench No. 0-14 1/4 diameter 6.35 3-5/8 90 174 50658

Check out our website for interactive features at starrett.com 359