DOCSLIB.ORG

Transaxle Oil Change

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Transaxle Oil Change Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm DIY Home Changing The Transaxle Oil Time, Total Time, Cost, First-Time Cost 20min, 40min, 3qts of Oil (~$20) Number of Persons 1 Difficulty level 3, messy level of 5 Torque wrench , 3/8" socket adapter or breaker bar, Tools special funnel, oil pan, rags, 17mm socket, crush washer s, Simple Green or citrus degreaser Special Tools 1 each crush washer 94109-20000, 94109-14000, 3 Special Parts quarts of Honda MTL (Manual Transmission Lubricant) Service Manual Pages 13-3 Service Interval Every 30,000 miles or every 2 years Prerequisite Jack (20min) www.nsxprime.com , 1 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm 2 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm 1. Prepare Tools: we'll need a torque wrench, a breaker bar, a 1/2" to 3/8" socket adapter (if breaker bar and/or torque wrench are 1/2"), a 17mm socket, two crush washers (see part numbers above), a special funnel (see below), oil pan capable of holding at least 3 quarts, and 3 quarts of Honda Manual Transmission Fluid (available at Acura/Honda dealerships). Socket Adaptor, Ace# 21296 Funnel, Ace# 8099632, attach 3 feet of 1/2" I.D. clear plastic hose, Ace# 4027512 3 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm replace short hose with longer hose, secure with nylon ties if needed. 2. Drive car around for 10 minutes to warm up transmission oil. 3. Jack up car and place securely on jack stands. Note: the transmission is very close to the exhaust pipes, which will be extremely hot. You may want to consider wearing protective gloves and long sleeved shirt. Try to remember these hot pipes and manifolds before contacting them with your head and face. 4. remove oil FILL plug using 17mm socket. Please see Service Manual diagram above for location. Please remove this plug before draining the oil so if by chance you can't get it loose, your car won't be stuck with an 4 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm empty transmission! 5. Position oil pan below and towards driver's side of oil drain plug. 6. Using a breaker bar and a 3/8" socket adapter (no socket, just the 3/8" adapter, cool eh?), loosen and remove the drain plug. The hot oil will immediately drain out so make sure you are not in the "line of fire"! 5 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm 7. Let it drain for as long as you want (long enough to crack open a pop and have a drink). 6 of 7 08/02/2013 13:58 Transaxle Oil Change http://www.danoland.com/nsxgarage/transoil/index.htm 8. While the oil is draining, install the new crush washers on the fill plug and drain plug. With a rag, clean the washers and the flanges of the plugs. Toss old crush washer in trash. 9. Install the drain plug and torque to 29 lb-ft. 10. Insert funnel between the airbox and strut bar in the engine compartment and snake the hose around and insert into the fill plug. 11. Fill with 2.9 quarts of oil. The oil will start draining out at about 2.7 quarts, at this time, remove the fill hose and screw in the fill plug; this can be a little messy. Torque to 33 lb-ft. 12. Clean up! Instructions in Brief Drive car around to warm up transmission oil. Jack up car and place securely on jack stands. remove oil FILL plug using 17mm socket. Position oil pan below and towards driver's side of oil drain plug. Loosen and remove the drain plug. 3/8" bare socket The hot oil will immediately drain out so make sure you are not in the "line of fire"! Let it drain for as long as you want (long enough to crack open a pop and have a drink). Install the new crush washers on the fill plug and drain plug. With a rag, clean the washers and the flanges of the plugs. Install the drain plug and torque to 29 lb-ft. Insert funnel between the airbox and strut bar in the engine compartment and snake the hose around and insert into the fill plug. Fill with 2.9 quarts of oil. Torque fill plug to 33 lb-ft 7 of 7 08/02/2013 13:58.
Load more

Recommended publications
  • 77 Pc. Metric Basic
    MASTER SETS 77 Pc. Metric Basic Set ■ Fasteners from 7mm to 26mm ■ 1/2" Drive Sockets and Drive Tools ■ 27 Sockets ■ 17 Wrenches ■ 7 Screwdrivers ■ 5 Pliers and Snips ■ 21 Additional Tools Cat. No. UPC No. Description Product Weight 44-035 781412440355 77 Pc. Metric Basic Set with Hand Box 50.50 lb * Please Note: Most tools Armstrong branded. May include other leading Apex Tool Group brands. Cat. No. Description Cat. No. Description 16-605 20" Steel Hand Box - Red 44-036 77 Pc. Metric Basic Set 1 Cat. No. Description Cat. No. Description Cat. No. Description 28-408 8" Chrome Finish Adjustable Wrench 7mm Full Polish Long Pattern Combination Wrench 39-110D 1/2" Drive 12 Point Standard Socket 10mm 52-207 28-410 10" Chrome Finish Adjustable Wrench 12 Point 39-111 1/2" Drive 12 Point Standard Socket 11mm 8mm Full Polish Long Pattern Combination Wrench 67-109 7" Diagonal Pliers, Heavy Duty 52-208 39-112 1/2" Drive 12 Point Standard Socket 12mm 12 Point 67-305 6-5/8" Chain Nose Pliers with Wire Cutters 39-113 1/2" Drive 12 Point Standard Socket 13mm 9mm Full Polish Long Pattern Combination Wrench 67-407 7" Quick Release Locking Plier with Curved Jaw 52-209 39-114 1/2" Drive 12 Point Standard Socket 14mm 12 Point 67-669 8" Slip Joint Pliers 39-115 1/2" Drive 12 Point Standard Socket 15mm 10mm Full Polish Long Pattern Combination Wrench 67-779 10" Tongue and Groove Pliers 52-210 39-116 1/2" Drive 12 Point Standard Socket 16mm 12 Point 69-448 Ball Pein Hammer, Hickory Handle 1 lb.
    [Show full text]
  • SPECIAL 394 Piece
    ® 394 Piece Tool Sets NEW Limited 13-Piece Ratchet and Socket Set - SAE (3/8” Drive) 13-Piece Ratchet and STORE STOCK Availability Technician’s Socket Set - Metric SKU 454335 99 $ 99 (3/8” Drive) STORE STOCK 70-517 39 SAVE 999 SKU 454333 99 • Shallow Sockets are Color Coded for Starter Set 70-518 39 Easy Identification 22-Piece 3/8” Drive Socket Set • Includes Ratchet, Extension and Spark This all purpose technician’s starter set features the 36" Montezuma Crossover™ • Includes: 3/8" Drive Plug Sockets SKU 484028 99 Ratchet, 3" Extension, • Made with Cr-V Steel for Extra 70-501 49 toolbox stocked with a well-balanced selection of basic hand and specialty tools. 5/8" Spark Plug Socket, Strength 3/8" Drive 6-Point Metric • Reversible Ratchet, 3” Extension Montezuma’s Crossover™ toolboxes combine the flexibility of a drawer toolbox with the Sockets: 8, 9, 10, 11, 12, • Fully Polished with Knurled Handles Bar, (11) Metric Shallow Sockets, for Non-Slip Gripping (9) SAE Shallow Sockets efficiency and organization of their patented peg tool storage system. You'll work faster 13, 14, 15, 17 and 19 mm and an Organizational Case • Sturdy Storage Case Keeps Set *While Supplies Last and more efficiently, with the most-used tools placed at your fingertips. This toolbox set Organized ® comes with over 390 of the most commonly used tools and features Duralast tools. 24-Piece Ratchet and Socket Set - Metric and SAE SKU 454336 99 STORE STOCK Tool Set Savings: $200.00 70-519 54 Bonus Crossover Combo: $799.99 • Color Coded for Easy Identification NEW TOTAL
    [Show full text]
  • Collision Repair Technology Required Tool List
    Collision Repair Technology Required Tool List Safety glasses (OSHA approved) 25 foot tape measure (std/metric) Ear protectors Fender cover Tire air inflation chuck with ¼” Lincoln style air fitting Tire air pressure gauge Tire valve core remover Blow gun, non-restricted with ¼” Lincoln style air fitting Flashlight with batteries Wire brush 12” flat mill file 10” round file 3/8” Scraper/putty knife 1” Hack saw with blades Stethoscope 12 volt test light Digital Multi-meter – Fluke 88 16oz ball peen hammer 3 piece pry bar set to include a 24” pry bar Punch/chisel set, center, pin, starter, flat chisel Screwdriver set, flat blade (regular) Screwdriver set, Phillips Torx bit set for ¼” and 3/8” drive (10t to 55t) Vise Grip locking pliers set Vise Grip panel clamp assortment 6” needle nose pliers 7” diagonal cutters 7” combination/slip joint pliers 9” arc/adjustable joint pliers 16” arc/adjustable joint pliers 7” electrical crimp/wire stripping/cutting pliers High speed drill bit set (1/16”- ½”) Hood prop rod Charcoal Filter Respirator with organic vapor cartridges Allen wrench set (SAE) Allen wrench set (metric) Combination wrench set (SAE 5/16”-1”) Combination wrench set (metric 8mm-19mm) Adjustable wrench 8” Mechanics gloves Magnetic pick-up tool Door trim removal tool (v-notch clip removal) ½” drive socket set to include the following: ratchet extensions – 5” & 10” long universal joint breaker bar – 18” shallow SAE sockets 3/8” – 1 1/8” shallow metric sockets 10mm – 19mm ½” drive click type torque wrench 3/8” drive socket set to include
    [Show full text]
  • Auto Technicians Tool List
    Auto Technicians Tool List Walla Walla Community College does not endorse any one brand or manufacturer of tools. Socket Set - 1/4" Drive • 3/16" – 9/16" Standard Depth (6 Point) • 3/16" – 9/16" Deep (6 Point) • 5mm - 14mm Shallow (6 Point) • 5mm - 14mm Deep (6 Point) • Ratchet • Extension - 3", 6" • Flex/Universal Joint Socket Set - 3/8" Drive • 5/16" – 7/8" Standard Depth (6 Point) • 3/8" – 7/8" Deep (6 Point) • 8mm - 19mm Standard Depth (6 Point) • 8mm - 19mm Deep (6 Point) • Ratchet • Extension - 3",6",12",18" • Universal Joint • Fractional Universal Impact Socket Set 3/8" – 7/8" (Rec mid-depth) • Metric Universal Impact Socket Set 9mm - 19mm (Rec mid-depth) Socket Set - 1/2" Drive • 7/16" - 1 1/8" Standard Depth (6 Point) • 7/16" - 1 1/8" Deep (6 Point) • 10mm - 25mm Standard Depth (6 Point) • 10mm - 25mm Deep (6 Point) • Ratchet • Breaker Bar • Extension 3",6",12" Combination Wrenches • 1/4" – 1-1/4" Standard • 7mm - 24mm Metric Tubing Wrenches • 3/8" - 3/4" • 10mm - 18mm Hex (Allen) Wrenches • 050" - 3/8" Fractional • 2 mm - 7mm Metric Screw Drivers Blade Type • Stubby • Pocket screwdriver • 1/4" x 6" • 1/4" x 9" • 3/8" x 9" • 3/8" x 16" • Offset Phillips • #2 Stubby • #1 Tip • #2 Tip • #3 Tip • Offset Torx Bits Tamper Proof (Screwdriver or Sockets) T-8, T-10, T-20, T-25, T-27, T-30, T-40, T-50, T-55 Pliers • Slip Joint 6" • Needle Nose 6" • Diagonal Cutter 7" • Channel Locks 12" (water pump) • Duck Bill Pliers 7 ¾” (ex.
    [Show full text]
  • Specialty Tools Brake Tools
    Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
    [Show full text]
  • Autozone Tool & Equipment Quarterly First Quarter 2014
    ® Hand Tools Socket Set 22 Piece 3/8” Drive Limited Socket Set SKU 484028 99 70-501 49 Availability Technician’s • Reversible Ratchet, 3” Extension Bar, (11) Metric Shallow Sockets, Starter Set (9) SAE Shallow Sockets This all purpose technician’s starter set features the 36" Montezuma Crossover™ *While Supplies Last toolbox stocked with a well-balanced selection of basic hand and specialty tools. Montezuma’s Crossover™ toolboxes combine the flexibility of a drawer toolbox with the Spark Plug Sockets Star Bit Set efficiency and organization of their patented peg tool storage system. You'll work faster Magnetic 12 Piece Star Bit Set and more efficiently, with the most-used tools placed at your fingertips. This toolbox set Spark Plug Sockets STEEL ® SKU 914172 99 comes with over 390 of the most commonly used tools and features Duralast tools. 13/16" 70-055 27 SKU 482598 99 STORE STOCK 75-506 5 • 1/4” Drive: T10, T15, T20, T25, T27 and T30 STORE STOCK • 3/8” Drive: T40, T45, T47, T50 and T55 5/8" • 1/2” Drive: T60 SPECIAL SKU 482599 99 $ 75-508 6 SAVE 200 STORE STOCK • 3/8” Drive • Knurled for Easy Hand Turning • Magnetic Plug Retainer 392 Piece for Better Hold Technician’s Adapters Starter Set All Open Stock Items Available in Store SKU 388834 1/4”M x 3/8”F Adapter .....................SKU 482536 73-814 ................................ 499 70-513 3/8”M x 1/4”F Adapter .....................SKU 557436 73-816 ................................. 399 99 3/8”M x 1/2”F Adapter ....................SKU 482534 73-812................................
    [Show full text]
  • OVER 500 PRODUCTS INSIDE... All Prices and Part Numbers Are Correct at Time of Printing
    THE YIELD Agricultural Engineers Since 1894 PARTS THE BIGGESTALL BRANDS IN ONE PLACE GUIDE £71.96 INC VAT Draper Page 16-19 Ledlenser Page 4 OFFER £179.10 INC VAT Squire Locks Page 30 Buckler Boots Stihl Page 10-11 Page 24-30 OVER 500 PRODUCTS INSIDE... All prices and part numbers are correct at time of printing. Summer 2021 | www.peacock.co.uk 04 LEDLENSER 05 Our aim is simple, CTEK to provide quality 06 products to farmers OVERALLS 08-09 & farm contractors at the best CASTLE CLOTHING possible pricing with off the shelf 10-11 availability. Our parts departments BUCKLER BOOTS 14-15 carry over 40,000 shelf lines with a stock value in excess of £4 DRAPER - POWER TOOLS 16 million. We welcome all enquiries from new and existing customers DRAPER - HAND TOOLS 17 including large buying groups and DRAPER - ACCESSORIES cooperatives. 20 STIHL - CHAINSAWS 21 Stephen Bradford STIHL - HEDGERS 22 Group Parts Manager STIHL - GRASS TRIMMERS 23 STIHL - BLOWERS Our depots 24 STIHL - KOMBI 25 Brigg The Old Foundry, Brigg, STIHL - MOWERS 26 North Lincolnshire, DN20 8NR t. 01652 600 200 STIHL - OILS & LUBRICANTS 28 Corringham HAYTER High St, Corringham 29 Gainsborough, Lincolnshire DN21 5QP AUTOGLYM 30 t. 01427 838 696 SQUIRE LOCKS 31 Halsham Halsham, Hull, HU12 0BT WÜRTH 01964 614 233 t. AgriculturalSince 1894Engineers 2nd Quarter 2021 | www.peacock.co.uk Louth QUALITY USED MACHINERY Contents MF9380 Page 12 MF9380 T MF7282 AL HEADER Welcome 02 Quality Used Machinery 03 Agricultural Engineers Grimsby Rd, Louth Summer Combine Demonstration 04-05 Since 1894 IT’S ALL Serving your Furry Friends 06 Meet the Team - Selby Parts 07 ABOUT..
    [Show full text]
  • Red Rover – Nordhavn 55 Tool List
    RED ROVER – NORDHAVN 55 TOOL LIST Prepared by Jeff Merrill and Kevin Jeffries. General Non‐contact digital inferred thermometer Headlamp Magnet with extending handle Mirror with handle Tool boxes Tool bag Small parts boxes Misc. SS nuts/bolts/screws/common hardware O ring set Pipe for use as leverage bar Flexible “claw” Soldering iron/solder Sand paper Crash tape SS hose clamps Digital calipers Various epoxy glues, putty sticks, underwater glue Silicone 3M 5200 (varieties) Bedding compound Gloves, various styles Ear muffs, two sets Variety of double faced tape Blue tape Duct tape Label maker/extra label material Flash light Misc. lengths of aluminum and Stainless flat bar, angle and plate for parts making Pipe cleaners Small hand bike pump Safety glasses Rags Blue paper towels Magnetic parts holder (bowl) Plastic containers SS or aluminum stiff wire (like bailing wire) Rubber kneeing mat Bolt/thread measuring tool 1 Metal ruler Page Pens/sharpie/pencil © 2016 Jeff Merrill Yacht Sales www.JMYS.com all rights reserved RED ROVER – NORDHAVN 55 TOOL LIST Specialty Fuel bleed tool Other Engine/systems specific specialty tools? Stuffing box wrench? Stuffing box material Mechanical Screwdriver set, two each of the common sizes Chain wrench Strap wrenches with rubber straps Vice grips, many sizes Rivet gun with SS and aluminum blind rivets Awl Auto center punch Clamps, bar and C styles Standard and metric wrenches, standard length (possibly with ratcheting ends) Standard and metric wrenches,
    [Show full text]
  • Q C Series Torque Wrench Repair, Maintenance
    MICROMETER ADJUSTABLE “CLICK TYPE” TORQUE WRENCH REPAIR, MAINTENANCE AND TROUBLESHOOTING MANUAL SUGGESTED PRICE $35.00 PART NUMBER: 21-201-01 ISSUED NOVEMBER , 2001 TABLE OF CONTENTS TITLE PAGE(S) SAFETY INSTRUCTIONS – WARNING & CAUTION 1 CDI TORQUE TESTING EQUIPMENT - Illustration 2 INTRODUCTION 3 CLEANING 3 LUBRICATION 3 REPAIR TOOLS REQUIRED 3 OTHER REQUIRED MATERIALS 4 INSPECTION 4 CAUTION – Customer misuse 4 ACCURACY VERIFICATION AND MINOR CALIBRATION PROCEDURE 4/8 MINOR CALIBRATION ADJUSTMENT 6/8 Handle Locking -Table 8 CALIBRATION ACCURACY CHECK - Illustration 8 MAJOR CALIBRATION AND REPAIR 8/14 To disassemble the tube 9 To recalibrate the wrench 9/14 Pawl Orientation Chart 10 Pawl Size - Table 11 Pawl Style Chart - Table 11 i TITLE PAGE(S) Pawl Identification Code Example 11 Pawl Selection Chart - Table 12 Example #1 with Pawl Selection Chart - Table 13 Example #2 with Pawl Selection Chart - Table 14 To Disassemble and Check Parts 15/17 CAUTION – Positive Spring Pressure 17 To check for positive pressure on the spring 17 HANDLE/LOCK RING REPAIR 18/23 To disassemble the handle/lock ring 18/21 To assemble the handle/ lock ring 21/23 Handle Locking - Table 23 Calibration Instructions for Pre-Set Torque Wrenches 23/24 CDI Pre-Set Torque Wrench Ranges & Adjustment Tool Part Numbers 24 Troubleshooting 24 Micrometer Adjustable Torque Wrench Troubleshooting Matrix 25/26 ii REVISIONS – The CDI Micrometer Adjustable Torque Wrench Repair Manual was originated and first issued in November 2001. The manual will be reviewed and revised as necessary to assure that it contains the latest changes in product or repair changes. In between revision, product bulletins may be issued to assure any changes in product or repairs are supplied to authorized repair facilities.
    [Show full text]
  • Tool List for Automotive Career
    1st year tool list Riverland Community College’s Auto Service Program OPTIONAL tool list These, except the laptop, are the optional, recommended tools for you as a Auto Service Technician. Once you are ready to go to work, or certain this career is for you, you should consider purchasing these. Quantity: Description: Price: 1 You need a Windows laptop. -This is not optional. $ 1 Tool box, lockable, roll around $ 1 ¼” drive metric socket set including ratchet, flex-joint, 2, 4, 6” extensions, 4.5 to 13 mm deep and shallow sockets. $ 1 3/8” drive metric socket set including ratchet, breaker bar, flex-joint, 1,3,6” extensions, 10 to 19 mm deep and shallow sockets. $ 1 13/16 and 5/8” spark plug sockets with rubber insert and flex joint, designed for narrow access. $ 1 ½” drive ratchet, breaker bar, 5, and 11” impact extensions. $ 1 1/2” drive 13 to 24 mm impact deep and shallow sockets. $ 1 Torx bit set T8 –T60, ¼, 3/8 and 1/2” drive as appropriate. $ 1 Allen bit set 2 to 19 mm, ¼, 3/8 and 1/2” drive as appropriate. $ 1 Combination wrench set 7-21mm, including 18 mm. $ 1 Flare nut wrenches 8, 9, 10, 11, 12, 13, 14, and 15 mm. $ 1 Flat blade screwdriver set, 6, 8,10, 13” $ 1 7 piece Phillips screwdriver set. $ 1 3 piece pin punch set. $ 1 3 piece chisel set. $ 1 Center punch. $ 1 Combination metric/standard feeler gauge set, 25 or more pieces $ 1 Metal file - flat 10 inch $ 1 Spark plug gap gauge.
    [Show full text]
  • Owner's Manual & Safety Instructions
    Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 15k Visit our website at: http://www.harborfreight.com Email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Specifications Torque Range 5 - 80 ft-lb Drive 3/8" Accuracy ± 4% Important Safety Information WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury. Save all warnings and instructions for future reference. 1. The warnings, cautions, and instructions 6. Do not use handle extension to increase in this instruction manual cannot cover all force.
    [Show full text]
  • HAND TOOLS Hablamos Español
    1-877-AZTool1 (1-877-298-6651) HAND TOOLS Hablamos Español Wrench Sets Drive Bits Master Hex Bit Set ST EE L SKU 094663 25952 4999 1/4” Drive: ST EE L 1/8”, 5/32”, 3/16” and 7/32” 3/8” Drive: 1/4”, 9/32”, 5/16” and 11/32” 35-Piece Master Torx Bit Set 44-Piece Master Torx and Hex Bit Set 1/2” Drive: 3/8”, 1/2”, 9/16”, 3/4” and 5/8” SKU 466622 SKU 311698 99 99 1/4” Drive: 25951 49 25950 46 2.5, 3, 4 and 5 mm • Star: T8, T10, T15, T20, T25, T27, T30, T40, T45, Hex:, 2 2.5, 3, 4, 5, 6, 7, 8, 10; 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” and 3/8” 3/8” Drive: ST EE L T47, T50, T55 and T60 Star: T10, T15, T20, T25, T27, T30, T40, T45, T47, T50, T55 and T60 6, 7, 8 and 9 mm 16-Piece • Tamper Proof Star: T7, T8, T9, T10, T15, T20, T25, Phillips: #1, #2 and #3 1/2” Drive: 10, 12, 14, 17 and 19 mm Combo Wrench Set - SAE T30, T40, T45, T50 and T55 Slotted: 3/16”, 1/4” and 5/16” • Female Star: E4, E5, E6, E7, E8, E10, E12, E14, SKU 531642 99 E16 and E18 Bits: T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H and T30H 17329 49 11-Piece Tamper Proof Torx Plus Bit Socket Set • Sizes Include: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 and 1-1/4" SKU 255725 • Durable Nylon Storage Pouch 13-Piece 1/4” Drive 22973 Tamper-Resistant Star Security Bits • Raised Panel Design SKU 447157 99 99 24293 29 59 • Sizes: T7-T50 • Set Includes: (1/4” Drive) 8-TPT, 10-TPT, 15-TPT, 20-TPT and 25-TPT, (3/8” Drive) 27-TPT, 30-TPT, 40-TPT, 45-TPT, 50-TPT and 55-TPT Stubby Star Drive Sets Tamper Proof 13-Piece 1/4” Drive • 3/4" Overall Length Designed
    [Show full text]