RTU Licensing Activation Process

By : Yatin Dakhole

[email protected]

Version : 1.2

Team : EMEA Provision support team

Dated : June 2010

Created by ydakhole

Aim of the document: This document is meant to server as a reference guide for connectivity to CMS, Audix, Definity and authorization of licenses for this products using the tools available at Avaya to effectively make changes in the RTU’s/Authorizatons in RTU products.

Content of the document: Wherever possible, the information contained is general in nature, elsewhere it is specific to the requirements of the EMEA Provisioning team.

Index

1> Introduction to RTU a> What is RTU. b> How RTU Helps organization

2> Case creation. a> Mastreo b> SAP > Database storage. d> PARF form. e> SLA.

2> Basic access methods a> Access Methods i. Direct access through modem ii. Direct access through ASG Guard iii. Direct access through Tracker iv. Indirect access through PBX/Communication manager in absence of direct connectivity. v. Direct access through SSG for SAC implementation. vi. Analog line setup vii. Avaya internal license activation. ( Internal network). viii. Web Conferencing. ix. VPN access.

b> Tools i. EMEA Tools Servers ii. NAR ToolsA sever. iii. APAC toolsA server. iv. Putty application.

3> Product Descirption.

Created by ydakhole a> CMS RTU licenses b> Intuity Audix licenses c> Definity licenses

1> Introduction to RTU

a> What is RTU? RTU is a process where we can activate the features installed in products be manually dialing into the particular server product. Here we do not install any license file like RFA.

b> How RTU helps organization. For each an every feature activation in servers customers pay charges. Every feature have different charges. Using RTU process Avaya earns from it.

2> Case handling

For all the license activation we need to raise cases in Mastreo or sieble ( depends upon the customer segment. ). 1> Make sure the cases is getting raised on end customer’s FL ( Functional location ) number. 2> Case description ( In RTU process we follow a common template ) RTU / CMS License activation / Req Comp Date / SAP order number. 3> Case severity is always 2 and commit date would be always next 48 business hours. ( Even it is major or requesting for an urgency ). 4> Select the case type as “Prov” ( Provisioning ). 5> Language : English 6> FL contact: Always enter the FL contact person as mentioned in PARF form. 7> Case notes tab : a. 1st case notes : title – RTU , Description: Number of licenses need to be activated, and what kind of licenses. b. 2nd case notes : Tile – Remote access details , Description- Need to enter the dail in details of the servers. ( Please do not enter any server passwords in case notes ). 8> Hours tab – a. While creating the case always use the 0700 REC b. Once you start dialing into the system select 0700 RMT. 9> Esc tab : This tab is used for any email exchange and also pasting the logs of the server. This is tab is also used for pasting the logs of before activation of licenses and after activations. 10> Parf form: This needs to pasted in esc tab as well as in attachments.

Created by ydakhole 11> Make sure the parf form consist of contact details, product name, SAP order number and remote access details along with the dial in details and required passwords. 12> Regular updates regarding the case needs to be updated in case notes as well as in esc tabs. 13> Case closure : Once customer confirms to close the case please use the closure code as I085 and completed by as FL contact name..

SAP order

For RTU process customer needs to provide the six digit Avaya SAP order number. ( e.g: 804888 ). This SAP order number will help us to know how many and what kind of licenses in needs to be activated. Following steps will show you how to access the SAP order and how to check the licenses.

1> Open the SAP login with your user name and passwords  Use the search code as VA03. 2> Enter the SAP order number in the search tab  Once SAP order is opened it will show you who is the end customer as well as kind and number of licenses.

Created by ydakhole

Created by ydakhole

Database Storage

Database storage is nothing but it’s a common place where we store the SAP numbers and cases which are already used. This helps us to restrict the usage to repetitive usage of same SAP number which are already been used for activation of licenses.

Our job is once we get a request for the license activation we first check the SAP provided by customer whether its really been used or not. If not then we go ahead and activate the licenses and update our database with that SAP order number. If the SAP order number was previously used then we check the case number which was raised against that particular SAP order number and recheck whether the licenses of that SAP were really activated or not, because there are many chances that cases may get cancelled due to insufficient information. If the licenses were activated then we would check with the customer and for the possible reason of re usage of that SAP order number. Along

Created by ydakhole with that we also need the approval email from the respective Avaya Client Service manager.

RTU Database link: \\ii307868fps01\groups\EMEAProvCR\RTU Sheet

PARF Form

Parf forms are nothing but just a simple form which needs to be filled up by the customer for any RTU license requests. This form asks to fill up the customer details, remote access details, SAP order numbers and customer’s contact details. Generally there are two types of form one is used for CMS, Audix and RAS IP generation and other one is used for IP License key generation.

Parf forms: \\ii307868fps01\groups\EMEAProvCR\Parf Forms

SLA

SLA for any kind of RTU request is next 48 business hours from the date of case creation. Severity of the case will be remain 2. Even the customer is asking for the urgent support will raise a case on severity 2 only.

Basic Access Methods

The RTU systems are connected in many ways but for that we need to have access to for dialing servers that is to ssemxp01, ssemxp02, st3tds02 toolsA servers.

i> Direct Access through modem This means that the RTU system can be directly accessed by the modem, i.e the modem is directly connected to the CMS, Audix or Definity system. Hence when we dail to the modem the it directly brings up the login prompt of the RTU system where we need to activate the licenses.

Eg : if customer have given a modem dail in number as “+44 3212142245”

Then on the dialer prompt type the command as “sc2 +44 3212142245 ” then hit enter and it will show you 10 options out of which we need to select the 9th one which is generally called as dumb from where we can access any kind of systems.

Created by ydakhole

As per the last screenshot it shows that after dialing into the modem it directly brought the login prompt for the RTU system where we need to activate the licenses.

Created by ydakhole ii> Access through ASG Guard ASG stands for Access through Secured Gateway. This device is nothing but acts like a simple network hub. From this device there are multiple Avaya products are connected which can be accessed with the help of only one modem. We just need to dial in to the ASG guard device from there you can select the product which you want to access and it will directly give you the login prompt of that particular product.

sc2 dialinnumber option 9

use challange response to login

login:lucguard ~asg lucguard 001-121 5010000000

5010000000 is the dafault

If you see 501...... then please use it

You list ip addresses and names: laip

Created by ydakhole

Then you connect to the right CMS cont nameofthecms Example : cont GGH_CMS1 and you will get the login prompt of CMS.

If you connect to the serial port of the guard then you use ’ con ’.

iii> Access through Tracker Tracker is also nothing but a small hub which acts like ASG guard only but have only limited 3-4 ports which means from tracker you are able to connect only 3-4 products.

sc2 dialin number Option 9

Created by ydakhole

As soon as you find INADS Login started. Connect2 process is PID XXXX. Exactly below where the red arrow is indicated you need to enter the password for tracker i.e type PASSWORD or PASSW0RD or password provided by customer ( Please note while typing the password you will not be able see anything what you are typing).

Created by ydakhole

As soon as you enter the “PASSWORD” and hit enter you will get a prompt call 1> There you need to type the port number to which the system is connected to which needs to be accessed Eg : If CMS system is connected to 3 rd port then here is the below example

1>;SP3 - Enter once ( Note it system is on 2 nd port then it would be ;SP2) O.K.

3>;ME  Hit enter twice and you will get the CMS login prompt

Login:

iv> Indirect access through PBX/Communication manager in absence of direct connectivity.

Sometime you do not have a serial modem modem or a modem connected to the system you need to access but you have a modem connected to the PBX ( CM ). Hence customer may connect the system which you want to activate the licenses to the CM system and would ask you to dial into the CM system and to the system to authorize the licenses. sc2 Dial in number Option 1

Created by ydakhole

Once you start dialing in at the end you will get a prompt shell stating Enter your terminal type (i.e., , vt100, etc.) [vt100]=>

Hit enter twice you will get the CM prompt and from there you can telnet or ssh to the system which want to access.

Created by ydakhole Note: There are two ways to connect to the system which you want to access from CM. One is by telnet and another through ssh. a> Telnet : from the CM prompt you can simply type the command “telnet ip address of the system. b> SSH : SSH is also like a telnet process but command is different i.e “ssh cmssvc@ipaddress” ( If it is audix then it should be “ssh tsc@ipaddress”). v> Direct access through SSG for SAC implementation.

If you have dail in details connection srarting with 172 then it can be a connection through SSG. Example: 172.20.8.133 You go to site and look for IP address: http://gtsopsrep.global.avaya.com/gtsreporting/generalreports/allpending.aspx

Created by ydakhole

Then you can find SEID of the CMS. You look for this SEID in Maestro then You try to connect as

connect2 alarmid init or connect2 ’SE ID’ init

If you cannot connect then you contact [email protected]

If you cannot connect you try to connect to any CM on this FL and try to ssh to the system which you want to access.

vi> Analog line

Use putty or other program

ate1 // echo atdt90048 226400500 ath // break

Created by ydakhole

Once you dail to the system you will directly get the prompt of CMS login. vii> PPP Connections

You get a dial in number, user name and password for ppp connection

Windows-control panel- network connections- create new connection-connect to the internet-set up my conenction manually- connect using dial-up modem- name: RAS ppp- phonenumber-my use only- uncheck use this account.... and uncheck make this the default..... - finish

If you connect to guard/defender/ intuity LX you unclick the prompt for name and password

Created by ydakhole

And click the show terminal window

Make sure that Networking-Internet protocol-properties-advanced settings- use default gateway on remote network is not checked

You check it when you connect to a ppp server.

Created by ydakhole v

viii> VPN Connection

Sometime customers like banking customers do not allow connecting the system through modem or dialup. Hence they ask to connect through their VPN network and access the systems.

Windows-control panel- network connections- create new connection-connect to the network at my workplace- connection-name- do not dial the initial conenction-ip address blank- my use only- finish

VPN connection is not supported from Avaya as firewall blocks the connection.

Created by ydakhole Sometimes works. Sometimes you don’t have other option to connect specially at banks. So you look for your home internet and you connect from home.

VPN connection set up a ppp tunnel so you can connect with putty using IP address of the CMS.

Note: This access methods are not Avaya recommended access way to connect to the system. Hence try to avoid this type of connection till certain exceptions.

ix> Web confrecing

Just like as VPN connection Web conferencing is also not a recommended method to connect to the system which needs to be authorized.

Hence try to avoid this type of connection till certain exceptions.

Avaya Web conference link: https://webconferencing.avaya.com/

Errors while connecting to the modems 1> No Answer – Ask the customer to reset the modem ( From Avaya side we will not do any troubleshooting part for modem connectivity ). 2> Busy – Wait for 15-20 minutes and dial in again, if you still face the problem then ask the customer to reset the modem. 3> Junk Character – Same ask the customer to reset the modem or just inform the customer about the junk characters. 4> Some time while you connect from CM you get an error that some one else has already logged in to the system and session gets disconnected. At that time you need to use the dial in command line as “sc2 dial in number –s 9600 –F 10.3.3.3” this will forcefully assign the above IP address and will help to connect to the CM.

Created by ydakhole

Avaya Modem dialers

In order to connect to any customer modems Avaya have installed their dialer server in multiple locations in entire world.

Hence you need to get access to the below dialer servers.

1> ssemxp01 2> ssemxp02 3> Toolsa server ‘st3tds02’ ( SAL enabled ).

Interface to use these servers

1> Putty 2> Hummingbird 3> Teranova 4> Command prompt

Created by ydakhole CMS License Activation

What is CMS  CMS stands for Call management system. This application helps you to monitor the calls, assign an agent to the particular split, and also does much functionality.

As per our process our job is to activate the features and addition of agents, supervisors, ACDS and split skills.

Requirements: SAP, modem dial in numbers, login id and passwords.

How to login to CMS

Usually root is not allowed as first login. That is why we use cmssvc or cms. Mostly land5hark is working.

Login: cmssvc Passwords: land5hark, cmssvc, =empty=

Login cms Passwords: cms, cms123, land5hark

If none of them is good you may try first login as root. Customer should give you the root password. But you may try: root, =empty=, root123, root01, atnt

If you login as cmssvc you should su – root This will change user as root. If you are a root that you can run command cmssvc

As soon as you get a host prompt of CMS ‘e.g atndge01s#’ from there you need give a command called as cmssvc this will list you out 12 commands which have different functionality.

Created by ydakhole

Out of these 12 commands we are allowed to you only first two commands.

Command 1 > auth_display : This will display the features which currently authorized. Command 2> auth_set: This will help to make changes in the installed features.

In order to select that particular command you need to just enter the number where the command is listing in front of Enter the choice (1-12) or q to quit:

Created by ydakhole If we enter the option 1 then you will find the display of features installed in CMS server.

Brief description of each authorization /RTU available in CMS.

Version purchased: R16

Capability/Capacity Authorization ------vectoring authorized forecasting authorized graphics authorized external call history authorized expert agent selection authorized external application not authorized global dictionary/ACD groups authorized Avaya CMS Supervisor authorized Avaya Report Designer authorized Maximum number of split/skill members 1 Maximum number of ACDs 1 Simultaneous Avaya CMS Supervisor logins 2 Number of authorized agents (RTU) 1 BDL10042B3#

· Version Purchased: This is the Version that is sold to the customer and Avaya Authorizes the customer to use. This option is not configurable · Disk Mirroring: Disk mirroring is a feature that provides data redundancy and protection from disk failures by writing the same data on multiple disks.

Created by ydakhole · Vectoring : This is a CM feature which provides multiple call treatment for incoming calls. · Global Dictionary / Multi-ACD Reporting - provides transparent views of agents regardless of which switch they may log into. · Avaya CMS Supervisor : This feature allows the supervisors in a Contact Centre environment to monitor, administer and evaluate performance of the agents using a windows Graphical user interface (GUI, pronounced gooey) client. · Avaya Report Designer: This feature allows the design of reports from the windows GUI. · Split or skill members : They are defined as the number of CMS-measured agentsplit and agent-skill combinations that are logged in at the same time. Each split that an agent logs into is an agent-split combination. Each skill that is assigned to an agent while the agent is logged in is an agent-skill combination. · Maximum number of ACDs: This denotes the number of ACDs that are authorized to be integrated with the CMS. In all, eight real ACDs can be integrated with CMS. · Simultaneous Avaya CMS Supervisor logins: This RTU denotes the maximum number of simultaneous supervisor logins authorized for the CMS. The limit for the CMS system is 400 simultaneous supervisor logins. · Number of authorized agents (RTU): This is the total number of agents logged in across all ACDs that is authorized by Avaya or purchased by the customer.

How to activate/make changes in the RTUs? CMS RTU and Application installations are done via the command line within a customer’s CMS. a. Login into the CMS using root login id b. Enter cmssvc at the ‘#’ or root prompt. c. Select the option for ‘auth_set’ which is usually 2. d. Enter the CMS Authorization/RTU Password. e. Make the relevant changes for the authorizations as per the requirement. f. Check the authorization again using ‘auth_display’ option to verify the changes made. Note: Different authorizations may be displayed, depending on the current version of Avaya CMS on your system and the packages installed. Adding CMS RTU 1. Log in to the customer’s CMS as root or root2. 2. Enter: # cmssvc

Created by ydakhole

3. Enter the number associated with the auth_set option.

The system displays the following message: 4. Enter the appropriate password. Important: The CMS Authorization password is available only to authorized personnel. Do not share it with unauthorized ones.

Once you are able to login with that authorization password you will be able to make the changes as per SAP order number provided by customer.

Newly installed CMS server’s features looks like below one Version purchased: R16

Capability/Capacity Authorization ------vectoring authorized forecasting authorized graphics authorized external call history authorized expert agent selection authorized external application not authorized global dictionary/ACD groups authorized Avaya CMS Supervisor authorized Avaya Report Designer authorized Maximum number of split/skill members 1 Maximum number of ACDs 1 Simultaneous Avaya CMS Supervisor logins 2 Number of authorized agents (RTU) 1 BDL10042B3#

Created by ydakhole Note: Any new installed CMS will show external application feature as not authorized and we need to authorize it by default even customer did not request for it.

Normal license activation for a new installed CMS

If support the you have SAP order number showing where the CMS is a completely a new installed equipment none of the features activated just like as above screenshot. And you get a request to activate 397 agent licenses.

Steps: a> Enter the authorization password. b>Please do not make changes in first five features. c> Once you get the option of external application just put Y in front of it. d> Again for next three feaures do not make any changes. e> Now it would ask you for enter the total number of Supervisors to be activate and thier please enter 5 supervisors as a default number.

f> Now it would ask for entering the split skills numbers then it would be the number agents requested as per the SAP mutiplied by 60 split skills i.e ( Example : 397 agnts x 60 split = 23820 ).

Note: For every addition of 1 agent RTU, ‘split/skill members that can be Administered’ RTU must be increased by 60. g> Customer did requested for adding any ACD hence we would not change the value of ACD. If customer would have placed an additional ACD then SAP order would have shown an different material. h> We will increase the value of agents to 397 as per the SAP.

397

After activating the licenses it the CMS features would look like as below.

Created by ydakhole Version purchased: R16

Capability/Capacity Authorization ------vectoring authorized forecasting authorized graphics authorized external call history authorized expert agent selection authorized external application authorized global dictionary/ACD groups authorized Avaya CMS Supervisor authorized Avaya Report Designer authorized Maximum number of split/skill members 23820 Maximum number of ACDs 1 Simultaneous Avaya CMS Supervisor logins 5 Number of authorized agents (RTU) 397 BDL10042B3#

Addition of licenses to already installed CMS

Before Activation

Version purchased: R15

Capability/Capacity Authorization ------disk mirroring installed vectoring authorized forecasting authorized graphics authorized external call history authorized expert agent selection authorized external application authorized global dictionary/ACD groups authorized Avaya CMS Supervisor authorized Avaya Report Designer authorized Maximum number of split/skill members 1200 Maximum number of ACDs 1 Simultaneous Avaya CMS Supervisor logins 6 Number of authorized agents (RTU) 20 BDL093889F#

There are some requests where customer have just requested to add additional agents and supervisors to the CMS

Created by ydakhole As per this SAP customer have requested for 30 additional agents and 67 supervisors. Hence as per this we will only change the value of split skills , supervisors and agents only.

Ie . Supervisor will have :: 6 already activated + 67 newly requested = 73 supvs. Total agents : 20 already activated + 30 newly requested = 50 agnts. Split skills : 20 + 30 = 50 x 60 = 3000

After activation

Version purchased: R15

Capability/Capacity Authorization ------disk mirroring installed vectoring authorized forecasting authorized graphics authorized external call history authorized expert agent selection authorized external application authorized global dictionary/ACD groups authorized Avaya CMS Supervisor authorized Avaya Report Designer authorized Maximum number of split/skill members 3000 Maximum number of ACDs 1 Simultaneous Avaya CMS Supervisor logins 73 Number of authorized agents (RTU) 50 BDL093889F#

Addition of ACD

If customer request for addition of ACD then we will change the value of maximum number of ACD

If current status shows 1 then we need to change the value to 2.

CMS License upgrade

CMS license upgrade is done when you are upgrading the hardware from older version to a newer version.

Created by ydakhole Requirements: Old CMS dail in details, New CMS dail in details and login id and passwords.

Upgrade rule : As per the upgrade rule the number of upgrade agents licenses are showing in SAP order number should match with the number of agents were activated in Old CMS.

Or Number of upgrade agents licenses showing in SAP order number should be less than the number of agents licenses in old CMS.

1>For this first we need to dial in to the Old CMS and take the screenshot of the installed feaures in it so that we can match SAP order number with it. ( Note : Cumpalsory agent must dial in to the old CMS system and take the screenshot. Please do not use the screenshot provided by the customer. If customer states that Old CMS has been crashed or no access to it then he need to get the approval from thier respective Avaya Client Service manager. ).

2>Once the SAP order is matched with the installed features in old CMS then we need to dial into New CMS and activate the same number of agent licenses as per the SAP order number. Copy same number of supervisors and ACDs in old CMS to the new CMS. ( Note: New CMS will be always a newly installed CMS but in this do add those default 5 supervisors to it. Default 5 supvs license activation is only applicable for normal CMS license license activation process.)

Created by ydakhole

CMS HA License activation

CMS HA systems are nothing but two similar severs acting like a backup for eachother. Hence both of them always need to have equal number licenses.

SAP order should show two material codes ie addition of agents licenses and same number of HA agent licenses, this will help to activate the liceneses in both primary and secondry CMS as well.

Note:1> There some instance that customer would provide two SAP order numbers out of which one would show the material code normal addition agent licenses for primary CMS and other SAP would show addition of HA agnts licenses for Secondry HA CMS.

Note:2> If customer gives a SAP order number having only addition of HA agent licenses then it means that Primary CMS already have that particular number licenses. Only you need to make the changes in secondry CMS so that it will equal the number of licenses in Primary and secondry. For that you need to first access the primary CMS then verify the SAP order number.

Created by ydakhole E.g : If SAP shows to activate 100 HA agent licenses then primary CMS should show the same number of licenses and you will activate those 100 licenses in HA CMS along with the same number Supervisors and ACDS.

Or If Primary CMS is showing 250 Agents only and secondry is showing only 150 agents. Then customer needs to order for only 100 HA agents licenses so that values of primary and secondry would become equal.

Note: 3> If customer have placed an order of activating only 10 Supervisors in both Primary and secondry CMS then he can place a order of normal addition of Supvs, so there is no need of separetly ordering HA supvs. Single request would word for main and HA. This rule also implies for ACD’s.

Note: 4> If customer have newly installed Primary and secondry CMS and none of the features are activated, and he placed an order of 150 New agent licenses and 150 HA agnt licenses. Then first we need to activate 150 agnt licenses in Main CMS and also add 5 Default supvs as its a new CMS. Now copy the same number of agts and supvs to the HA CMS as well.

Upgrade CMS HA licenses

If customer have Version 13 CMS want to upgrade it to a new hardware of R16 in an HA confriguation. Then SAP will show upgrade agents licenses and upgrade HA agent licenses. Now here 3 CMS’s are involved.

One is the older CMS of which we need to dial in manually and take the screenshot and match with the SAP order’s upgrade material code. Then check whether the HA agent licenses in SAP is as same as upgrade agent licenses.

Then you need to first activate the licenses in Primary CMS by copying the number of agents showing in SAP and Supvs & ACD’s from old CMS. Now copy the same number of licenses in HA CMS as well.

Note: In upgrade CMS HA we will not activate those 5 default Supvs.

CMS survivable:

Survivable CMS is like HA but it is not a copy of the main CMS. It is a part only. If the connection to main CMS fails then this CMS takes over the recording of data.

Created by ydakhole

CMS license transfer:

The same as in upgrade but you delete the specified licenses from old CMS and then you put it on the new CMS.

Created by ydakhole

Extra Notes

1> For every addition of 1 agent RTU,( R 13- R16) ‘split/skill members that can be Administered’ RTU must be increased by 60.

2> From R9 to R12 the agent, split skill multiplier is not 60 but 20.

3> If any new requests comes for R9, R10, R11, R12, R13 then please ask the customer to get the approval from the Avaya product manager Renee Armstrong.

4> CMS Authorization passwords are sent every month. Hence please keep those passwords very safe and do not share with any one.

5> The disk mirroring can be turned on when customer wants it. No SAP needed. Free on R14 and above.

6> If you turn on the mirroring even the customer doesn’t want it you may crash the CMS data!!

7> Some time you get an error called as IDS is down at that time please ask the customer to turn on the IDS.

Created by ydakhole

Audix License Activation

Lincensing Intuity LX:

It is a messeging server licensed by RTU team.

- We license the Intuity Audix LX only with this method. Other Audixes are licensed through RFA or different method . – - The licensing method should be handled as a secret. It is forbidden to tell customer any default password or the licensing method . - Always add the max port number and you can activate it wihout SAP order. - if unable to login as root using all default pwds when you have R2.0 then open a case at Tier 3 to reset root pwd.

Default Passwords

Login id: tsc b00mer r0ck135 ag8tcl0k intuity1 install1 tscpw tscpw1 guess1t showb1z brud0ga brurd0ga

Login id: sroot root s3slx1st brurd0ga sroot01 sroot rootpw d3nv3r passwd1 PassWord1 D3ckchair

- check sap order

Created by ydakhole

- connect to interface Intuity LX R1.1 using tsc login Intuity LX 2.0 using tsc and root logins

R1.1: set_ppp_options tscppp 192.168.7.1 192.168.7.2 passwd tsc :ag8tcl0k

R2.0: su – root password vi /etc/pppdialin.conf #o tscppp.ourip 192.168.7.1 tscppp.remoteip 192.168.7.2 # #:wq! passwd tsc

Created by ydakhole

- set ppp connection with your analog modem and line using tscpp login and challenge response

Created by ydakhole

- login to web interface 192.168.7.1 (or given IP address) using tsc login

Created by ydakhole

R 1.1

Created by ydakhole

Click save

R 2.0

Created by ydakhole

Created by ydakhole

Don’t forget to disconnect the ppp session!!

Created by ydakhole

Use ful commands

vs_status  Display’s the status of the VM ss  Gives the system status. We know that the system is completely up when “Networking: 20” is displayed chassis_type  Gives the type of the system stop_vs  Stops platform module (Voice platform) start_vs  Starts platform module (Voice platform) versdisp  lists version of Intuity restore card 0  Restores the card in slot 0. remove card 0  Removes the card out of service. diagnose card 0  performs diagnostics on card in slot 0 vihexec  Display's the system hardware details. shutdown –y –i6 –g0  Will reboot the system. softboot  Reboots the system. This is an easier command.

Created by ydakhole Setting PPP IP For Intuity Audix

audix% set_ppp_options tscppp 10.27.30.40 10.27.30.41

audix% cat /etc/pppdialin.conf sappp.ourip 10.0.0.1 sappp.remoteip 10.0.0.2 craftppp.ourip 10.0.0.3 craftppp.remoteip 10.0.0.4 tscppp.ourip 10.27.30.40 tscppp.remoteip 10.27.30.41

How to reset tsc and tscppp passwords for Intuity LX

lablx% passwd tsc Changing password for user tsc. New password: Retype new password: passwd: all authentication tokens updated successfully. lablx% passwd tscppp Changing password for user tscppp. New password: Retype new password: passwd: all authentication tokens updated successfully. lablx%

Extra Notes

1> Each Voice card has 4 ports. 2> To Intuity LX 1.1 you can add maximum 3 Voice cards = 12 voice ports. 3> To Intuity LX 2.0 you can add maximum 6 Voice cards = 24 Voice ports. 4> Voice cards are also know as Intel Dailogic Card (D/41JCT-LS).

Created by ydakhole Definity License Activation

Definity is a older version of Avaya Communication manager. Here we need to activate the licenses by manually dialing to the system and add the counter feauture which is requested. Definity is also called as Prologix

RTU Process : We only activate the Definity systems which are below versions of R11. In order to connect to Definity we need to use Teranova application.

How to access Definity and make changes

1> Use the same dialing command to dial in to the system i.e

sc2 dial in number

and then out of nine options you can select either 4th option or 9th option.

2> Use the login id as init and then you will get a challenge and product id.

Eg : login : init Challenge : 143-5431 Product id: 1504486002

Then enter the response as below

Created by ydakhole Response : ~asg init 1435431 1504486002 And you will be able to login. Note: Some time you will be not able to login with the product id you have or some time you will not get the product id besides challenge at that time use the default product id as 9000000000

4> Use terminal type always as 4410

5> Now inorder to display the current activated features use the below command

Disp sys cus or display system-parameters customer-options

Created by ydakhole 6> This will show you the main page of Definity. In order to go the next pages press F7 and you will other activated features in it.

7> Now in order to make changes in the system you need to use the below command

Cha sys cus or change system-parameters customer-options

8> Make the changes as per the requirement in SAP, in the respective page.

9> After making changes go till the last page and hit enter it will give you command shell and enter the command as save trans this will help to save the translation you have done in the system.

Created by ydakhole

10> To save the translation it would take few minutes. After that you will get an message stating Command completion status: success

11> Now in order to see the changes in the system you need to first log off from the system and login back to it.

Created by ydakhole Definity license activation rule

There are few options for which we get request to activate licenses in Definity.

1> If SAP is showing 20.000 ADD SSP R9-R10 SFTW LIC 1 PT

This is feature can be found on page 1 of Def system. Where by using the command “cha sys cus” you can change the number soft licenses.

2> If SAP is showing 20.000 CC ADD ELITE PER AGT 1-100 This feature needs to be activated on 6 th page of Definity system.

Created by ydakhole This is feature is for Elite Agent. You will find this option in Page 6 of definity system.

3> If SAP is showing 20.00 ADD XMobile Per LIC This option can be activated on first page itself.

Created by ydakhole