HOKLAS 217 Scope of Accreditation

Contact Details Registration No. HOKLAS 217 Page 1 of 1

217 TEST

Meyer Aluminium Limited - Material Laboratory 美亞鋁廠有限公司 - 物料實驗室

ADDRESS : 5 Dai Li Street, Tai Po Industrial Estate, New Territories, Hong Kong 地址香港新界大埔工業邨大利街5號

ENQUIRY : Dr Kenneth YUEN Dick-kwan, Technical Manager 查詢源廸鋆博士，技術部經理

TELEPHONE : 2660 2357 電話

FAX : 2664 6342 傳真

E-MAIL : [email protected] 電郵

WEBSITE ADDRESS : www.meyer-mal.com 網址

CLIENTELE : In-house laboratory, normally not available for public testing 服務對象通常只提供內部服務

Contact details last updated on: 21 July 2016 Scope of Accreditation Registration No. HOKLAS 217 Page 1 of 4

217 Issue Date: 14 December 2020 TEST Ref: HOKLAS217-11 Meyer Aluminium Limited - Material Laboratory 美亞鋁廠有限公司 - 物料實驗室

ADDRESS : 5 Dai Li Street, Tai Po Industrial Estate, New Territories, Hong Kong 地址香港新界大埔工業邨大利街 5 號

ACCREDITED TEST : Chemical Testing 化學測試 CATEGORY Physical and Mechanical Testing 物理及機械測試認可測試類別

Scope of Accreditation Registration No. HOKLAS 217 Page 2 of 4

217 Issue Date: 14 December 2020 TEST Ref: HOKLAS217-11 Meyer Aluminium Limited - Material Laboratory 美亞鋁廠有限公司 - 物料實驗室 5 Dai Li Street, Tai Po Industrial Estate, New Territories, Hong Kong 香港新界大埔工業邨大利街 5 號

Chemical Testing 化學測試 SPECIFIC TEST OR SPECIFICATION, STANDARD METHOD ITEM TESTED OR MEASURED PROPERTY MEASURED OR TECHNIQUE USED 測試或量度項目特定測試或量度的特性規範、標準方法或應用技術

Metallic alloys Chemical composition analysis

- 3003 Aluminium alloy - Copper ASTM B209-14 Cl. 7.1 in conjunction with in the form of chill-cast disk - Iron ASTM E1251-17a (with modification) by type B mold - Manganese - Silicon - Zinc

- 5052 Aluminium alloy - Chromium AMS-QQ-A-250A Cl. 3.1.1 in conjunction with in the form of chill-cast disk - Copper ASTM E1251-17a (with modification) by type B mold - Iron ASTM B209-14 Cl. 7.1 in conjunction with - Manganese ASTM E1251-17a (with modification) - Magnesium - Silicon - Zinc

- 5154 Aluminium alloy - Chromium ASTM B209-14 Cl. 7.1 in conjunction with in the form of chill-cast disk - Copper ASTM E1251-17a (with modification) by type B mold - Iron - Manganese - Magnesium - Silicon - Titanium - Zinc

- 6061 Aluminium alloy - Chromium ASTM B209-14 Cl. 7.1 in conjunction with in the form of chill-cast disk - Copper ASTM E1251-17a by type B mold - Iron - Manganese - Magnesium - Silicon - Titanium - Zinc

Scope of Accreditation Registration No. HOKLAS 217 Page 3 of 4

Physical and Mechanical Testing 物理及機械測試 SPECIFIC TEST OR SPECIFICATION, STANDARD METHOD ITEM TESTED OR MEASURED PROPERTY MEASURED OR TECHNIQUE USED 測試或量度項目特定測試或量度的特性規範、標準方法或應用技術

Metallic alloys Bend properties

- 3003 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 4.5 (for thickness between ASTM B209-14, Cl. 12 0.015 inch and 0.200 inch) (Note: The above two standards should be used in conjunction with ASTM E290-14: - Semi-guided bend – Arrangement C - Bend and flatten test

- 6061 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 4.5 (for thickness between ASTM B209-14, Cl. 12 0.125 inch and 0.200 inch) (Note: The above two standards should be used in conjunction with ASTM E290-14: - Semi-guided bend – Arrangement C - Bend and flatten test

- 5052 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 4.5 (for thickness between ASTM B209-14, Cl. 12 0.114 inch and 0.158 inch) (Note: The above two standards should be used in conjunction with ASTM E290-14: - Semi-guided bend – Arrangement C - Bend and flatten test

- 1100 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 4.5 (for thickness between ASTM B209-14, Cl. 12 0.032 inch and 0.200 inch) (Note: The above two standards should be used in conjunction with ASTM E290-14: - Semi-guided bend – Arrangement C - Bend and flatten test

Scope of Accreditation Registration No. HOKLAS 217 Page 4 of 4

Metallic alloys Tensile properties

- 3003 and 6061 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 3.2 (for thickness between ASTM B209-14, Cl. 9 0.015 inch and 0.249 inch) (Note: The above two standards should be used in conjunction with ASTM B557-15)

- 5052 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 3.2 (for thickness between ASTM B209-14, Cl. 9 0.020 inch and 0.249 inch) (Note: The above two standards should be used in conjunction with ASTM B557-15)

- 1100 Aluminium alloy sheet AMS-QQ-A-250A, Cl. 3.2 (for thickness between ASTM B209-14, Cl. 9 0.032 inch and 0.249 inch) (Note: The above two standards should be used in conjunction with ASTM B557-15)

- 5154 Aluminium alloy sheet ASTM B209-14, Cl. 9 (for thickness between (Note: The above standard should be used in 0.020 inch and 0.249 inch) conjunction with ASTM B557-15)