DOCSLIB.ORG

PL-0111-BRBALL • Brass & Bronze Ball Valves

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
PL-0111-BRBALL • Brass & Bronze Ball Valves PL-0111-BRBALL • Brass & Bronze Ball Valves • Forged Brass, Cast Brass and Bronze Prices Effective January 10, 2011 • Full Port & Standard Port • CSA, NSF and UL/FM Approved • Up to 600 WOG • Threaded Ends comply with ANSI/ASME • B1.20.1; Solder Ends Meet ANSI B16.18 759 BRASS BALL VALVE CONTINUED 759 BRASS BALL VALVE Part # Size List Price Inner Qty Master Qty IPS - wIth t-haNdLe Part # Size List Price Inner Qty Master Qty 759T03T 1/2 9.77 15 120 C X C 759T04T 3/4 14.28 10 60 759C03 1/2 11.06 15 120 759T05T 1 20.42 8 48 759C04 3/4 16.97 10 60 C X C With STAINLeSS STEEL t-haNdLe 759C05 1 24.58 8 48 759C03TS 1/2 12.95 15 120 759C06 1-1/4 40.45 4 24 759C04TS 3/4 18.30 10 80 759C07 1-1/2 59.24 2 24 759C05TS 1 27.55 8 48 759C08 2 85.58 2 12 759C06TS 1-1/4 44.52 4 24 759C09 2-1/2 184.25 2 6 IPS With STAINLeSS STEEL t-haNdLe 759C10 3 265.55 1 4 759T03TS 1/2 12.95 15 120 759C11 4 417.53 1 2 759T04TS 3/4 18.30 10 80 IPS 759T05TS 1 27.55 8 48 759T01 1/4 11.06 15 120 759T06TS 1-1/4 44.52 4 24 759T02 3/8 11.06 15 120 C X C BaLaNCING vaLve 759T03 1/2 11.06 15 120 759C04SDS 3/4 14.28 10 60 759T04 3/4 16.97 10 60 759T05 1 24.58 8 48 759T06 1-1/4 40.45 4 24 757 BRASS BALL VALVE 759T07 1-1/2 59.24 2 24 759T08 2 85.58 2 12 Part # Size List Price Inner Qty Master Qty CXC 759T09 2-1/2 184.25 2 6 757C02 3/8 15.32 10 180 759T10 3 265.55 2 4 757C03 1/2 16.47 10 120 759T11 4 417.53 1 2 757C04 3/4 23.58 10 90 C X C - wIth t-haNdLe 757C05 1 36.15 6 60 759C03T 1/2 9.77 15 120 757C06 1-1/4 69.93 4 36 759C04T 3/4 14.28 10 60 757C07 1-1/2 98.91 4 24 759C05T 1 20.42 8 48 757C08 2 151.15 2 12 757C09 2-1/2 206.67 2 6 757C10 3 276.04 2 4 757C11 4 498.11 2 2 www.matco-norca.com Global sourcing. National compliance. Local service. PL-0111-BRBALL • Brass & Bronze Ball Valves (Page 2) Prices Effective January 10, 2011 757 BRASS BALL VALVE CONTINUED 754 PEX Part # Size List Price Inner Qty Master Qty Part # Size List Price Inner Qty Master Qty IPS 754PX03 1/2 X 1/2 5.84 10 100 757T01 1/4 14.44 12 144 754PX04 3/4 X 3/4 9.87 10 100 757T02 3/8 15.32 12 144 754PX05 1 X 1 14.77 8 48 757T03 1/2 16.47 12 144 With t-HANdLe 757T04 3/4 23.58 10 70 754PX03T 1/2 X 1/2 5.84 10 100 757T05 1 36.15 10 60 754PX04T 3/4 X 3/4 9.87 10 100 757T06 1-1/4 69.93 6 36 757T07 1-1/2 98.91 4 24 754 W/DRAIN 757T08 2 151.15 4 16 757T09 2-1/2 206.67 2 6 Part # Size List Price Inner Qty Master Qty 757T10 3 276.04 2 4 C X C 757T11 4 498.11 2 2 754DC3 1/2 11.13 25 100 754DC4 3/4 16.68 10 40 754N BRASS BALL VALVE - ECONOMY 754DC5 1 26.84 6 24 IPS Part # Size List Price Inner Qty Master Qty 754DT3 1/2 11.13 20 80 C X C 754DT4 3/4 16.68 10 40 754C03N 1/2 9.09 15 120 754DT5 1 26.84 4 16 754C04N 3/4 13.73 10 90 754C05N 1 22.65 6 60 754C06N 1-1/4 32.90 6 36 755 - TEST COCK 754C07N 1-1/2 52.13 4 24 754C08N 2 74.34 2 16 Part # Size List Price Inner Qty Master Qty IPS 755MF0 1/8 X 1/4 8.59 12 144 754T01N 1/4 7.17 30 120 755MF00 1/8 X 1/8 8.59 12 144 754T02N 3/8 7.00 30 120 755MF1 1/4 X 1/4 8.59 12 144 754T03N 1/2 9.09 15 120 With Slot SCREW 754T04N 3/4 13.73 10 90 755MFZ0 1/8 X 1/4 8.03 50 200 754T05N 1 22.65 6 60 755MFZ1 1/4 X 1/4 8.03 50 200 754T06N 1-1/4 32.90 6 36 754T07N 1-1/2 52.13 4 24 754T08N 2 74.34 2 16 754T09N 2-1/2 153.91 1 8 754T10N 3 229.79 2 4 754T11N 4 344.63 2 2 IPS - CROSS HANdLe 754T05NX 1 27.03 5 60 PL-0111-BRBALL • Brass & Bronze Ball Valves (Page 3) Prices Effective January 10, 2011 752N STANDARD PORT - ECONOMY 758 Part # Size List Price Inner Qty Master Qty Part # Size List Price Inner Qty Master Qty C X C CXC 752C02N 3/8 6.38 6 120 758C03 1/2 13.51 10 120 752C03N 1/2 7.38 6 120 758C04 3/4 20.28 5 60 752C04N 3/4 9.98 6 120 758C05 1 29.59 4 48 752C05N 1 17.86 6 60 758C06 1-1/4 47.29 4 32 752C06N 1-1/4 25.19 2 30 758C07 1-1/2 65.46 2 20 752C07N 1-1/2 36.98 2 30 758C08 2 97.21 2 12 752C08N 2 51.64 2 24 IPS IPS 758T01 1/4 12.23 24 96 752T01N 1/4 6.73 6 240 758T02 3/8 12.23 24 96 752T02N 3/8 6.51 6 240 758T03 1/2 13.51 20 80 752T03N 1/2 7.38 6 120 758T04 3/4 20.28 14 56 752T04N 3/4 9.98 6 120 758T05 1 29.59 6 24 752T05N 1 17.86 6 60 758T06 1-1/4 47.29 4 16 752T06N 1-1/4 25.19 2 30 758T07 1-1/2 65.46 2 8 752T07N 1-1/2 36.98 2 30 758T08 2 97.21 2 8 752T08N 2 51.64 2 24 758T09 2-1/2 207.31 1 3 752T09N 2-1/2 112.91 1 12 758T10 3 310.24 1 2 752T10N 3 169.40 2 4 758T11 4 527.53 1 5 752T11N 4 262.69 2 2 IPS - CROSS haNdLe 760 - STAINLESS STELL 752T03NX 1/2 8.81 10 100 752T04NX 3/4 10.20 10 100 Part # Size List Price Inner Qty Master Qty 760T01 1/4 24.97 50 200 752N STANDARD PORT - COMPRESSION ENDS 760T02 3/8 30.74 40 200 760T03 1/2 33.06 20 100 Part # Size List Price Inner Qty Master Qty 760T04 3/4 46.70 10 88 752CMP3 1/2 10.03 25 100 760T05 1 58.59 10 50 752CMP4 3/4 15.04 15 60 760T06 1-1/4 86.33 5 30 752CMP5 1 20.49 10 40 760T07 1-1/2 108.12 4 24 760T08 2 140.68 2 25 Global sourcing. National compliance. Local service. CALIFORNIA 5593 Fresca Dr., La Palma CA 90623 • Toll Free: 866-532-8306 • Fax: 866-532-8307 TEXAS 1150 Silber Rd., Houston TX 77055 • Toll Free: 800-935-5456 • Fax: 713-680-2999 NEW YORK PO Box 27, Rt.22, Brewster NY 10509 • Toll Free: 800-431-2082 • Fax: 845-278-9056 WEB: www.matco-norca.com EMAIL: [email protected] ALSO AVAILABLE: Our New Catalog and Pricelists for Valves & Specialties, Waterworks & Irrigation, and Faucets & Plumbing Specialties. Also ask for our Catalogs and Pricelists for Malleable, Brass & Forged Steel Pipe fittings, and Merchant Couplings. PL-0111-BRSGV • Brass & Bronze Gate Valves Prices Effective January 10, 2011 • Full Port; Up to 300 WOG • Rising Stem and Non Rising Stem • Threaded Ends conform to ANSI Standards B2.1 • Solder Ends comply to ANSI Standards B16.18 • Valves are Tested in Accordance with MSS-SP-82 501 OS&Y GATE VALVE 513 HEAVY PATTERN GATE VALVE Part # Size List Price Inner Qty Master Qty Part # Size List Price Inner Qty Master Qty IPS IPS 501T04 3/4 121.89 6 60 513T04 3/4 40.85 5 50 501T05 1 169.56 16 48 513T05 1 64.65 5 40 501T06 1-1/4 219.70 12 36 513T06 1-1/4 88.84 4 24 501T07 1-1/2 261.69 2 8 513T07 1-1/2 127.86 4 24 501T08 2 380.01 1 6 513T08 2 164.06 1 6 IPS WITH CURB STOP HANDLE 513T08CS 2 166.43 1 6 503 GATE VALVE IPS WITH CROSS HANDLE 513T04X 3/4 38.52 5 50 Part # Size List Price Inner Qty Master Qty 513T06X 1-1/4 83.24 2 24 IPS 513T08X 2 164.37 1 6 503T03 1/2 20.68 10 100 513T09X 2-1/2 278.01 1 10 503T04 3/4 26.28 6 60 513T10X 3 399.45 1 6 503T05 1 38.30 5 40 CURB STOP HANDLE ONLY 503T06 1-1/4 51.40 5 30 513CS04 1/2 - 3/4 2.93 1 20 503T07 1-1/2 68.46 4 24 513CS06 1 - 1-1/4 5.21 1 6 503T08 2 104.77 4 16 513CS08 1 - 1/2-2 11.40 1 6 503T09 2-1/2 191.55 2 8 ROUND BRASS HANDLE ONLY 503T10 3 279.37 1 6 513H08 2 19.52 1 6 CROSS HANDLE ONLY 503T11 4 466.57 1 4 513X08 1 - 1/2-2 5.89 1 6 www.matco-norca.com Global sourcing.
Load more

Recommended publications
  • The Expanding Reach of Plastic Valves
    BACK TO BASICS As seen in the Spring 2013 issue of M A G A … Z I N E The Expanding Reach of Plastic Valves Although plastic valves are sometimes seen as a Executive Summary BY TIM MORAN specialty product—a top choice of those who SUBJECT: Valves are manufactured in a make or design plastic piping products for industrial systems or wide array of thermoplastic materials who must have ultra-clean equipment in place—assuming these valves don’t have many general uses is short-sighted. In reality, with special properties. Designers have plastic valves today have a wide range of uses as the expanding come up with a variety of ways to use types of materials and good designers who need those materials new kinds of plastic valves. S P mean more and more ways to use these versatile tools. R I N KEY CONCEPTS: G 2 0 1 PLASTIC’S PROPERTIES • Thermoplastic materials 3 The advantages of thermoplastic valves are wide—corrosion, • Options in valve types V chemical and abrasion resistance; smooth inside walls; light A weight; ease of installation; long-life expectancy; and lower life- • What these valves can do L V cycle cost. These advantages have led to wide acceptance of E • Design considerations plastic valves in commercial and industrial applications such as M water distribution, wastewater treatment, metal and chemical A TAKE-AWAY: These valves are critical in G processing, food and pharmaceuticals, power plants, oil refineries harsh and challenging environments, but A and more. Z I perform well in many situations today. N E 1 ©2013 Valve Manufacturers Association.
    [Show full text]
  • Corrosion Resistant Thermoplastic Valves and Unions LIST PRICE SHEET
    THIS LIST PRICE SHEET IS AVAILABLE IN PDF AND EXCEL FORMAT AT WWW.LASCOFITTINGS.COM BALL VALVES Corrosion Resistant ACTUATED VALVES MIP BALL VALVES Thermoplastic Valves BUTTERFLY VALVES CHECK VALVES and Unions LIST PRICE SHEET STRAINERS PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER EFFECTIVE - October 1, 2018 VA TUBVS, SUBVS, SUPER C COMPACTS, BALL CHECK, VPS-27 UNIONS SWING CHECK, SPRING CHECK, LAB VALVES VB REPAIR PARTS, ACCESSORIES, Y-STRAINERS VC BUTTERFLY VALVES Supersedes VPS-26 SLO-CLOSE VALVES VK CONTRACTOR KITS (BFV & WAFER CHECK) VM MIP COMPACT BALL VALVES INFO/TERMS/WARRANTY VS SLO-CLOSE BALL VALVES (SEE PRICE SHEET VPSC-6) VT CPVC CTS BALL VALVES For a list of changes, see page 2. Distributed by: CUSTOMER SERVICE: 414 Morgan Street, Brownsville, TN 38012 Toll-free Phone (800) 776 2756 or (731) 772 3180 • Fax (731) 772 0835 www.lascofittings.com Visit Us Online! Design & Installation Information I Installation/Operation/Maintenance Sheets Sample Engineering Specs I Industry Standards I Chemical Resistance Information Overview of changes in this price sheet – VPS-27 Some products have increased by 5% due to material and other costs. The increase is higher for other products affected by the Section 301 tariffs that are now imposed on imports. The summary of changes is shown below. This is also shown in detail in the Excel sheet that is posted on the website. Valve Series Increase Full Block Industrial TUBV 5% Commercial TUBV 5% 801 Series TUBV 10% 131W White SUBV 10% Super C Compact Valve 5% Two-Pc Compact 2-1/2 – 4 5% Lab Valves
    [Show full text]
  • Titanium Valves
    TITANIUM VALVES Main office & factory Seoul office Address. » 8, Ansim-ro 59 gil, Dong-gu, Daegu, 41081, South Korea Address. » 13th fl, Dongwha-BLDG, 160 Seosomun-ro, Jung-gu, Tel. » 82-53-962-4839 Seoul, 04513, South Korea Fax. » 82-53-962-6383 Tel. » 82-2-2637-9188 URL » www.kpccorp.co.kr Fax. » 82-2-2637-9118 URL » www.kpccorp.co.kr » www.kpctitanium.com KPC BRIEF HISTORY TITANIUM VALVES 1977. 10 Established Korea Precision Casting Co. WORLD LEADER IN TITANIUM VALVES 1981. 08 Changed to KPC Corporation, a corporate company KPC is one of the world's leading manufacturers of industrial titanium valves, offering a full range of forged and cast titanium valves in a wide range of critical applications for chemical, petrochemical, aluminum and mining industries. The core competence of KPC is its capability to deliver titanium 1982. 03 Started Ball Valve Division valves that would add value to the customer's process industry. 1987. 05 Started Special Alloy Steel Division 1988. 06 Started Vacuum Arc Re-melting Division OPTIMAL DESIGN Finite Element Analysis and 3D Parametric Design Program of CATIA are rigorously utilized for analysis and verification of design in an effort to 1990. 05 Started Forging Division provide the optimum valve design that would best meet design requirements of customers. 1992. 05 Developed and produced Ball Valves for NACE and High Temperature Service 1994. 08 Authorized to use the API Monograms for API 6D VERTICALLY INTERGRATED PRODUCTION 1997. 02 ISO 9001 : 1994 certified by QCB KPC's production system is vertically integrated to cover the whole production process from material production to final assembly and in-house testing.
    [Show full text]
  • Ball Valve Selection Guide from Simple to Complex Designs
    SG-2020 Ball Valve Selection Guide From Simple to Complex Designs Electric, Pneumatic Actuators & Controls 3 and 4 Way Multi-Port Valves Pipeline Trunnion Type Valves Custom Designed Ball Valves Severe Service Metal Seats Segmented Control Valves Flush Bottom Tank Valves Steam Jacketed Valves Dribble Control Valves Instrumentation Valves V-Port Control Valves Special Alloy Valves Cavity Filled Valves Fusible Link Valves Automated Valves Cryogenic Valves PFA Lined Valves Sanitary Valves Ceramic Valves www.flotite.com 910.738.8904 | [email protected] Trunnion Ball Valves TM Series Engineered Valves for Pipeline Designed and Fabricated for Pipeline Applications. and Severe Service Applications Offering both forged 3-pc and cast 1 & 2 pc body designs. 3-Way 10" Applications: Oil and Pipeline applications and other industrial applications including: • Natural Gas Storage • Gas Transmission, Oil Refinery • Dryer Service • LNG, HRSG • Skids • Subsea • Natural Gas Compressor Stations • Desalination TB 80-19 • Petrochemical Plants • CO2 Service Models: • Pipeline TM150 • Power Generation TM300 TM600 Design Features: • Full Compliance with API-6D Size Range: • ISO 9001, CE & NACE 1"–56" • Grease Sealant Fitting Standard Pressure Rating: • ANSI Class 150, 300, 600, 900, 1500, 2500 ANSI Class 150-2500 • High Temperature Metal Seated • Piggable Service • Control Ball Valve • 3-Way Designs • Double Block & Bleed • Both Cast & Forged • Optional: Fully Welded Body Designs • Custom Designs Welcome! Segmented Control Valves Sentinel Series Eccentric Ball
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • Illinois Plumbing Code
    DPH 77 ILLINOIS ADMINISTRATIVE CODE 890 SUBCHAPTER r TITLE 77: PUBLIC HEALTH CHAPTER I: DEPARTMENT OF PUBLIC HEALTH SUBCHAPTER r: WATER AND SEWAGE PART 890 ILLINOIS PLUMBING CODE SUBPART A: DEFINITIONS AND GENERAL PROVISIONS Section 890.110 Applicability 890.120 Definitions 890.130 Incorporated and Referenced Materials 890.140 Compliance with this Part 890.150 Workmanship 890.160 Used Plumbing Material, Equipment, Fixtures 890.170 Sewer and/or Water Required 890.180 Sewer and Water Pipe Installation 890.190 Piping Measurements 890.200 Operation of Plumbing Equipment SUBPART B: PLUMBING MATERIALS Section 890.210 Materials 890.220 Identification (Repealed) 890.230 Safe Pan Material and Construction SUBPART C: JOINTS AND CONNECTIONS Section 890.310 Tightness 890.320 Types of Joints 890.330 Special Joints 890.340 Use of Joints 890.350 Unions 890.360 Water Closet and Pedestal Urinal 890.370 Prohibited Joints and Connections in Drainage Systems 890.380 Increasers and Reducers SUBPART D: TRAPS AND CLEANOUT (T/C-1) DPH 77 ILLINOIS ADMINISTRATIVE CODE 890 SUBCHAPTER r Section 890.410 Fixture Traps/Continuous Waste 890.420 Pipe Cleanouts 890.430 Cleanout Equivalent 890.440 Acid-Proof Traps SUBPART E: INTERCEPTORS − SEPARATORS AND BACKWATER VALVES Section 890.510 Grease Interceptor Requirements 890.520 Gasoline, Oil and Flammable Liquids 890.530 Special Waste Interceptors 890.540 Laundries (Repealed) 890.550 Backwater Valves − Sanitary System and Storm System (Repealed) SUBPART F: PLUMBING FIXTURES Section 890.610 General Requirements − Material
    [Show full text]
  • 701 Series Three-Way Ball Valve
    THE SPECIALTY MFG. CO. 5858 Centerville Road • St. Paul, MN 55127-6804 Tel: (651) 653-0599 • Fax: (651) 653-0989 www.specialtymfg.com • e-mail: [email protected] Vertically Integrated, Made in the USA 701 SERIES THREE-WAY BALL VALVE Design Considerations 2.50 The 701 Ball Three-Way Valve Series is designed to promote multiple configurations to fit the exact end use application. The 701 Three-Way Series can be used as a diverter, selecting or mixing 1.67 valve, the bottom port is common. The standard handle has 180 2.75 degree rotation and lies over the open port. When the handle is rotated 90 degrees from either port, flow is shut off to both ports. The panel mount requires a .812 hole and is supplied with one Knurled and one Hex brass nut. The maximum panel thickness is .150. UL configurations are available and rated to 250 psi. .86 UR configurations are available and rated to 500 psi. 1.72 Maximum Operating Pressure — 500 psi Maximum Operating Temperature — 180°F Ball Through Hole Diameter — .375 Options Material Options Brass Body and Ends, Nickel Plated Brass Ball, Teflon Seats, Zinc Die Cast Stem, Stainless Stem Screw Seal Options Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®), Neoprene Ball Options 180 Degree Handle Rotation with complete shut-off (Standard) 90 Degree Handle Rotation with no complete shut-off T-Hole ball (all ports open or all ports shut-off) End Options 1/8, 1/4, 3/8, 1/2 Female NPT 3/8 Compression 1/4 Male Flare Handle Options 2-1/2” Black Nylon Handle (Standard), 2-1/2” Red Nylon, 2-1/2” Blue Nylon, 2” Black Nylon, 2” Yellow Nylon, 2” Red Nylon, 2” White Nylon, No Handle Plating Options No Plating (Standard), Electroless Nickel Example of How To Order Inlet End Outlet End Outlet End Stem Seal Ball Plating Handle 1/8 FNPT 1/4 FNPT 1/4 FNPT Buna-N 180 Ball ENP 2” RED HDL (Standard) SMC Part Number: 701-2F4F4F-B,ENP,2” RED HDL The standard handle will lie over the open port when the valve is in the Full Open position.
    [Show full text]
  • Ball Butterfly Check Gate Globe Plug Valves Differences Applications Suitability
    ADELAIDE • BRISBANE • PERTH VALVE TYPES There are a large variety of valves and valve configurations to suit all services and conditions; different uses (on/off, control), different fluids (liquid, gas etc; combustible, toxic, corrosive etc) different materials and different pressure and temperature conditions. Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly,Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc. The following types of valves are used in a variety of applications, these descriptions may provide a basic guideline in the selection of valves. BALL VALVES BUTTERFLY VALVES Because of their excellent operating The butterfly valve derives its name from the characteristics, ball valves are used for the wing-like action of the disc which operates at broadest spectrum of isolation applications and right angles to the flow. It’s main advantage is a are available in a wide range of sizes and seating surface which is not critical. It is materials and are available in full flow and full designed for flow isolation. The disc impinges through conduit. Advantages - quick acting, against a resilient liner to provide bubble straight through flow in either direction, low tightness with low operating torque. Compact pressure drop, bubble tight shut off & operating and with a simple construction, butterfly valves torque, easily actuated. Disadvantages - facilitate easy pipe arrangement. Due to disc, temperature limitations on seating material, long they have slightly reduced flow characteristics. “relative” face to face dimension.
    [Show full text]
  • Apollo Valves
    Technical Data for: Apollo Valves How to Order Apollo Valves Bronze Ball Valves Two Piece Ball Valves Three Piece Ball Valves Three Way Valves Union End Valves Steam Prep Ball Valves ANSI Flanged Ball Valves Specialty Ball Valves Top Entry Valves Optional Configurations Engineering Data Apollo Numbering System PLEASE USE ALL DIGITS WHEN ORDERING 0 0 - 0 0 0 - 0 0 SIZE MATERIALS OR STYLE YPE VARIATIONS T 1 1/4" 70 Bronze 1 One Size Larger 1 NPT Female/150 Flange 2 3/8" 71 Bronze with pads Male Retainer 2 Solder & Soc. Weld/150 3 ½" 72 Carbon Steel, High Pressure 2 Adjustable Stop Lever Flange Full Port 4 3/4" 73 Carbon Steel 3 Cu-Ni Ball & Stem 3 Union End NPT/Reg.Port 5 1" 73A A105 Carbon Steel 4 SS Sall & Stem Soc.Weld 6 1 1/4" 74 Nickel 5 Original Balancing Stop- 4 Union End Solder/Reg.Port 7 1 ½" 75 Pad-Locking Bronze Attach to Lever or T-Handle Soc.Weld 8 2" 76 CF8M Stainless Steel 7 One Size Smaller 5 Spring Return/High Pressure 9 2 ½" 76F CF8M Stainless Steel, Full Port Female Retainer Full Port NPT 0 3" 77 Bronze Full Port 8 (Not Assigned) 6 3-way, NPT/High Pressure A 4 " 77C Bronze Full Port Economy 9 Pinned Retainer Soc.Weld Full Port C 6" 78 Special Valves 7 Butt Weld/300 Flange E 8" 79 Refrigerant Valves 8 Male x Female, NPT/600 Flange G 10" 7A Chlorine Carbon Steel 9 3-way Solder/O-Ring Boss/300 H 12" 7K Bronze Full Port Drain Flange Full Port 80 Bronze, UL Listed 81 Bronze UL Listed Plain Ball 82 Bronze 3-Piece Full Port 83 CS 3-Piece 83R CS 3-Piece, Actuator Ready 85 SS 3-Piece, Reg.Port 85R SS 3-Piece, Reg.Port, Actuator Ready 86 SS 3-Piece, Full Port 86R SS 3-Piece, Full Port, Actuator Ready 87 CF8M SS Flanged 87A CF8M SS Flanged 87A-400 Alloy-20 Flanged 88 Carbon Steel Flanged 88A Carbon Steel Flanged 89 Cast Carbon Steel w/Pads 9A Bronze, Hvy.Patt.
    [Show full text]
  • Source Water Sample Taps
    July 2010 DOH 331-436 Revised Groundwater Rule: Source Water Sample Taps The Groundwater Rule (GWR) requires all Group A water systems with groundwater sources to sample each groundwater source for E. coli within 24 hours after a distribution system sample is unsatisfactory for total coliform, unless they routinely: • Disinfect to meet the standard of 4-log virus inactivation (99.99 percent). • Complete the associated daily compliance monitoring. Operators must collect these samples as close to the source as possible and before any treatment facilities, pressure tanks, or storage tanks. To meet these monitoring requirements, the Department of Health Office of Drinking Water (DOH) expects all water systems to have properly installed sample taps at each groundwater source. What is the difference between a “GWR source sample tap” and a “chemical source monitoring sample tap”? The GWR source sample tap is located as close to the source as possible and before any treatment. A chemical source monitoring sample tap is located after all treatment but prior to the first distribution connection. Where should I install a GWR source-water sample tap? Install GWR source sample taps as close to the source as possible and prior to all treatment facilities, pressure tanks, and storage tanks. Poorly installed GWR sample taps make it difficult to use proper sampling techniques and increase the risk of contaminating a sample during collection. GWR sample taps should: • Point downward. • Be in a clean, accessible location. Fecal matter may contaminate samples collected at sites with animal infestations such as bats, birds, or rodents. Sample taps buried in wood chips or wrapped in loose insulation can become contaminated.
    [Show full text]
  • Valve Catalog
    Valve Catalog CALIFORNIA • TEXAS • ILLINOIS • GEORGIA • NEW YORK Table of Contents ITEM NAME PAGE NUMBER ITEM NAME PAGE NUMBER ITEM NAME PAGE NUMBER ITEM NAME PAGE NUMBER A C (continued) F (continued) P (continued) Angle Control Valve ...........................9 IBBM ....................................................64 Foot Valve ................................................19 Push Connect Ball Valve .................5 Angle Valve ...........................23, 31, 36 Lever & Weight ..........................65 Forged Carbon Steel Valves PVC Flanges ...........................................68 Automated Ball Valves ..........50-53 Resilient Seat ........................64-65 Check Valves ........................46-47 PVC Valves Aztec Boiler Drain .............................24 UL/FM ................................................65 Gate Valves ....................................43 Ball Valves................................12-13 Aztec Garden Valve .........................24 Wafer ..................................................66 Globe Valves .................................44 Check Valves ................................20 Aztec Hose Bibb ................................25 Cast Iron Flanges .........................68 Forged Stainless Steel Valves Q Aztec Low Pressure Cast Iron Gate Valves Check Valves ................................47 Quick Opening Gate Valve ........16 Valves ..................................................24-25 AWWA ...............................................63 Gate Valves ....................................43
    [Show full text]
  • Advanced V-Control Ball Valves, 1/4”-12” Pneumatic, Electro-Pneumatic & Electric Controls Threaded, Socket Weld, Butt We
    Advanced V-Control Ball Valves, 1/4”-12” Pneumatic, Electro-Pneumatic & Electric Controls Threaded, Socket Weld, Butt Weld & Flanged End Valves Control Valves V-Control Ball Valves with Pneumatic, Electro- Pneumatic and Electric Actuation A BUBBLE TIGHT SHUT OFF VALVE AND PRECISION CONTROL VALVE COMBINED IN ONE 15° V-Port 30° V-Port 60° V-Port Standard round ported ball valves have been used, and continue to be used, for many control applications such as services involv- ing moderate pressure drops. Now, with the development of Flow-Tek’s characterized V-balls, a full range of control applications is available with superior flow control. These 1/4 turn control ball valves are more com- 90° V-Port Custom Slotted Port Custom V Port pact, lighter weight and much less expensive than comparably sized globe valves and Exceptional Characterized Control segmented control valves offered by other Flow-Tek’s characterized balls provide predictable and accurate control companies. Flow-Tek control valves offer of downstream flow rates. These precision cut balls match the control fast response times to control signals due to performance of globe valves while offering the economy, features and advanced digital control of actuation and the reduced size and weight of ball valves. Flow-Tek offers a wide range of inherent strengths of ball valves. These valves V-Port and Slotted Port characterized balls. The standard characterized exceed Class VI offering bubble tight shut balls and an example of a custom ball are shown above. The 90° and off with zero leakage. Other features include 60° balls, like standard round hole balls, offer an equal percentage inher- superior rangeabiltiy and repeatability, high ent flow characteristic.
    [Show full text]