DOCSLIB.ORG

HB-104A -User Manual-20190220

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
HB-104A -User Manual-20190220 1X4 4K60HZ HDMI 2.0 INTRODUCTION: Our HB-104A 4K HDBaseT splitter distributes a single HDMI 2.0 4K 60Hz 4:4:4 source to Three simultaneous HDBaseT outputs. The HB-104A splitter HDBASET SPLITTER utilizes technology to deliver HDMI, Bi-directional IR and PoH (PoE) up to lengths of 100m (70m 4K 60Hz 4:4:4) over a single CAT6a cable. The 4-Way splitter also features audio breakout, EDID management,and HDMI loop out for integrating local displays or cascading to multiple devices. FEATURES: Advanced HDBaseT technology offering uncompressed video and audio with zero latency Features 1x HDMI input that is replicated to 3x HDBaseT outputs Features 1x HDMI loop out for integrating local displays or cascading to multiple devices Quick Installation Guide Supports 4K 60Hz 4:4:4 UHD video up to 70m via cat6a cable Extends HDMI 1080p video up to 100m via cat6a cable Ver. 1.0 Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission HDMI audio breakout to both Optical and coaxial digital outputs concurrently Supports PoE (Power over HDBaseT) to power compatible HDBaseT receivers Compatible with the HDBaseT receivers - ET-13S-RX(4K60Hz 4:4:4) Advanced EDID management Attention: HDCP2.2 compliant Customer need to buy the receiver separately PACKAGE CONTENTS: 1 x HB-104A 1 x 48V/1A DC power supply 1 x IR emitter (IRE) All brand names and trademarks are properties of 1 x IR receiver (IRR) their respective owners 1 x User manual 1 2 PRODUCT OVERVIEW: Front Panel : Rear Panel : IR In IR Out Power HDMI IN HDDMI OUT HDBT 1 HDBT 2 HDBT 3 RS232 EDID HDMI In Coaxial Optical HDMI Out HDBaseT Out1 HDBaseT Out2 HDBaseT Out3 48V ① IR In: plug the IR receiver into this jack ① HDMI input - connect to a HDMI source ② IR Out: plug the IR blaster into this jack ② Coaxial audio out - RCA connector, de-embedded audio from the HDMI input ③ Power indicator: constant blue color when the device is powered on ③ Optical out - Connect audio equipment ④ HDMI Input indicator: constant blue color when a HDMI source is connected ④ HDMI output - connect to a HDMI display or additional HDMI distribution ⑤ HDMI output indicator: constant blue color when a HDMI output is connected equipment ⑥ HDBaseT out indicator: constant blue color when HDBaseT receiver is connected ⑤ HDBaseT outputs - connect to HDBaseT receivers ⑦ RS232 port ⑥ DC 48V 1A ⑧ EDID DIP switch - used for global EDID settings 3 4 CONNECTION AND OPERATION: SPECIFICATIONS: RS232 Equipped Video input : 1x HDMI Type A female PC or Notebook Video output : 3x HDBaseT RJ45 connector, 1x HDMI Type A female Audio output :1x Optical & 1x digital coaxial IR Receiver IR Blaster HDMI Out RXRX HDMI Source HD TV PoH (Power over HDBaseT) supplied to compatible Blustream HDBaseT PS3,PC,STB, RS232 Cable RX Blu-ray DVD player etc receivers from the splitter HDMI In CAT6a IR input : 1x 3.5mm stereo jack RX HDMI Out RX HD TV IR output : 1x 3.5mm mono jack EDID : 16-bit potentiometer switch HDMI Out RX HDMI Out Power : 48V/1A DC RX HD TV Operating temperature : 32°F to 104°F (0°C to 40°C) HDMI Cable Storage temperature : -4°F to 140°F (-20°C to 60°C) CAT6a Cable HD TV RS232 Cable Speaker Compatible with (HDBaseT Receivers) : ET-13S-RX (4K 60Hz 4:4:4 maximum output) NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate. MAINTENANCE: Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit. Components inside this unit are not user serviceable. Do not remove the protective cover from the unit. Removing any panel from this product will invalidate the manufacturer's warranty. 5 6 SWITCHING EDID CONTROL : EDID TYPE REMARKS POSITIONS 0 EDID_BYPASS_HDBT COPY HDBT EDID,DEFAULT HDBT OUTPUT1 EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what 1 EDID_BYPASS_HDMI COPY HDMI EDID,DEFAULT HDMI OUTPUT1 audio and video resolutions are supported by the display. By pre-determining 2 1080P_2CH 1080P AND 2 CHANNEL AUDIO the video resolution and audio format of the source and display device you can reduce the time need for EDID handshaking thus making switching quicker 3 1080P_8CH 1080P AND 7.1 CHANNEL AUDIO and more reliable. 4 4K60HzY420_3D_2CH 4K60Hz,YUV4:2:0,3D AND 2 CHANNEL AUDIO The configuration of HB-104A splitter EDID settings is achieved by using EDID 5 4K60HzY420_3D_6CH 4K60Hz,YUV4:2:0,3D AND 6 CHANNEL AUDIO dip-switches located on the rear of the splitter - See below 6 4K60HzY420_3D_8CH 4K60Hz,YUV4:2:0,3D AND 7.1 CHANNEL AUDIO 7 4K60HZ_3D_2CH 4K60Hz,3D AND 2 CHANNEL AUDIO Global EDID Setting 8 4K60HZ_3D_6CH 4K60Hz,3D AND 6 CHANNEL AUDIO 9 4K60HZ_3D_8CH 4K60Hz,3D AND 7.1 CHANNEL AUDIO A 4K60Hz_3D_2CH_HDR 4K60Hz,3D,2 CHANNEL AUDIO AND HDR B 4K60HZ_3D_6CH_HDR 4K60Hz,3D,4 CHANNEL AUDIO AND HDR C 4K60Hz_3D_8CH_HDR 4K60Hz,3D,7.1 CHANNEL AUDIO AND HDR D User_EDID EDID CAN BE SET BY USER COPY OUTPUT EDID,PRIORITY COPY THE EDID OF OUTPUT1 TO USER EDID(ONLY COPY ONCE). THE E Copy_Tx_EDID RS-232 linked images OUTPUT AND INPUT INDICATORS WILL FLASH THREE TIMES IF COPY SUCCESSFULLY. CAS MODE ENABLE,mul ple product are used in F CASMode_SET tandem stacking, se ng it to this mode will result in be er compa bility. 7 8.
Load more

Recommended publications
  • Blackbird™ 4K 2X7 Hdbaset™ Splitter Kit User's Manual
    MONOPRICE Blackbird™ 4K 2x7 HDBaseT™ Splitter Kit P/N 24178 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES ....................................................................................................................................... 3 INTRODUCTION ................................................................................................................................................................................................ 4 FEATURES .............................................................................................................................................................................................................. 5 CUSTOMER SERVICE .................................................................................................................................................................................... 5 PACKAGE CONTENTS ................................................................................................................................................................................. 6 PRODUCT OVERVIEW ................................................................................................................................................................................. 6 Splitter ............................................................................................................................................................................................................... 6 Receivers ........................................................................................................................................................................................................
    [Show full text]
  • Desktop Solutions Cables to Go® Desktop Solutions Provide PC Desktop and Laptop Users Increased Functionality, Flexibility and Value from Their Systems
    DESKTOP SOLUTIONS Cables To Go® Desktop Solutions provide PC desktop and laptop users increased functionality, flexibility and value from their systems. From all line cables to UXGA monitor cables and everything in-between, Cables To Go has the right accessories to enhance virtually any computer application. No other manufacturer provides the same product depth, quality and expertise as Cables To Go. Having multiple computers in the home or office is now commonplace, and with TruLink® KVMs from Cables To Go users can control multiple systems with a single keyboard, mouse and monitor. TruLink KVMs eliminate redundant desktop peripherals, conserving space and power while ­­­providing complete control through multiple systems. Built with the finest chip sets and featuring sturdy, all-metal housings, TruLink KVMs are designed for years of hassle-free connectivity. See our full listing of KVM switches and cables starting on page 16. To provide users greater flexibility with their PC’s DVI and VGA video ports, Cables To Go offers a wide range of cables, signal extenders and signal selectors. These cables and devices provide users enhanced control, power and flexibility. See our innovative VGA and DVI solutions starting on page 11. USB has replaced SCSI, parallel and serial connections as the preferred desktop connectivity bus. With USB cables, adapters and hubs from Cables To Go, users gain control and flexibility through the common USB interface. See our complete listing of USB accessories starting on page 17. Cables To Go also provides complete connectivity solutions for FireWire®, parallel, serial, SCSI, IDE, SATA, Cat5e and Cat6, power and cable management.
    [Show full text]
  • Specifications
    [ Video Processors ] 20 Large System KD-VP2500 Digital Video Processor, Video/Audio Switcher Specifications and Universal Distribution Center Technical: » Inputs: 3 x Composite 1Vpp/75Ω on RCA connectors; 2 x S-Video 1Vpp/75Ω (Y) 0.3Vpp (C) on 4 pin connectors; 3 x Component (YPrPb) 1Vpp/75Ω (progressive or interlaced) on RCA connectors; 1 x VGA (RGBHV) (progressive) 1Vpp/75Ω on 15-pin HD female connector; 2 x HDMI (DVI-D) on 19-Pin HDMI Female connector; 4 x unbalanced stereo audio on RCA connectors; 4 x S/PDIF Digital Coaxial Audio on Left RCA connector; 2 x Digital Optical on Toslink connector » Outputs: 1 x Component/RGBHV Scaled output (Y/G, Pb/B, Pr/R, H, V) 1Vpp/75Ω, 5V TTL for H&V on RCA connectors; 1 x HDMI (DVI-D) Scaled Output on 19-pin HDMI Female connector » Processing: 8 fields of 3-D motion adaptive de-interlacing; 3:2 and 2:2 pull-down; Key Features bad-edit film detection and correction; subtitle detection and artifact removal; pixel-by-pixel adaptive interpolation; intra-inter-interpolation with alpha-blend ½ Accommodates 11 total digital and analog video input formats and connectors, combination; multi-directional edge detection and interpolation; fast moving detection including HDMI/DVI, VGA/RGBHV, Component, Composite and S-Video and interpolation; noise detection and noise adaptive interpolation; anti-aliasing filter ½ Up-converts / down-converts SD, HD, XGA, and WXGA resolutions of analog for down scaling, independent vertical and horizontal filter for up and down scaling. and digital video inputs from 480i to 1080i
    [Show full text]
  • How to Terminate a Compression Connector in This Lesson, We Will Teach You How to Install a Compression F Connector
    How to Terminate a Compression Connector In this lesson, we will teach you how to install a Compression F Connector. Other Compression Connectors are described below and other congurations vary slightly between manufacturers, but for the most part are very much the same in termination technique. Necessary Materials F-Connector RG-59 Coaxial 3/8” nut, 32 thread Cable screw-on connector RG-6 Cutters Note: Make sure your Coaxial Coaxial BNC-Connector Cable matches up to your Cable quick connect / disconnect Compression Connector by Strippers ¼ turn locking connector cable size. If you do not match Connector Types Connector Size Cable Coaxial the sizes up, you will not have Trade of the Tools a proper t. Compression RCA-Connector Connector push-on connector Tool reliant on a female RCA jack 1 CUT CABLE - Cut your Coaxial Cable 2 STRIP CABLE - Strip your Coaxial Cable with the to desired length at a 90º angle proper Coaxal Cable Strip Tool Look for a directional arrow so you can be sure to insert your Coaxial Cable properly The amount of turns will vary depending on the make and kind of cable you are using. 3 REMOVE LOSE PARTS - Remove 4 FOLD BACK BRAID - Carefully any lose material after stripping fold the braid over the Coaxial the Coaxial Cable Cable jacket. Note: Be sure braid is not touching the center conductor Do not cut o the braid Questions? Call us: 1-800-628-4511 / Visit Us Online: www.HollandElectronics.com How to Terminate a Compression Connector In this lesson, we will teach you how to install a Compression F Connector.
    [Show full text]
  • VGA to Video—Portable Plus Audio
    NOVEMBER 1993 AC330A AC330A-P VGA to Video—Portable Plus Audio POWER HORIZONTAL HORIZONTAL OVERSCAN VERTICAL CHROMA B ANTI-JITTER A ON OFF VGA to Video— Portable Plus Audio CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: [email protected] FCC AND IC STATEMENTS FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENT This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This digital apparatus does not exceed the Class A limits for Radio noise emission from digital apparatus set out in the Radio Interference Regulation of Industry Canada.
    [Show full text]
  • TP-580RA | HDCP Compliant | Hdbaset 4K60 4:2:0 HDMI Receiver with RS−232, IR & Stereo Audio Extraction Over Long−Reach Hdbaset
    TP-580RA | HDCP Compliant | HDBaseT 4K60 4:2:0 HDMI Receiver with RS−232, IR & Stereo Audio Extraction over Long−Reach HDBaseT TP−580RA is a high−performance, long−reach HDBaseT receiver for 4K@60Hz (4:2:0) HDMI, RS−232, IR and stereo audio signals over twisted pair that de−embeds the stereo audio signal on its digital and analog audio ports. It extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions FEATURES High Performance Standard Extender - Professional HDBaseT extender for providing long−reach signals over twisted−pair copper infrastructures. TP−580RA is a standard extender that can be connected to any market−available HDBaseT−compliant extension product. For optimum extension reach and performance, use recommended Kramer cables HDMI Signal Extension - HDMI 2.0 and HDCP 1.4 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS−HD, 2K, 4K, and 3D. EDID and CEC signals are passed through from the source to the display I−EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling, processing and pass−through algorithm that ensure Plug and Play operation for HDMI source and display systems Multi−channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for supporting studio−grade surround sound Audio De-embedding - According to auto−sensed signal attributes and per user selection, the transmitted digital audio signal or Audio Return Channel (ARC) signal, is extracted from the AV signal.
    [Show full text]
  • Gomax CV-57C
    S/PDIF to Stereo Audio Mini Converter P/N: AV-GM0AQ3-S1 Safety and Notice The AV-GM0AQ3-S1 S/PDIF to Stereo Audio Mini Converter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM0AQ3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. Follow all instructions and warnings marked on this unit. Do not attempt to service this unit yourself, except where explained in this manual. Provide proper ventilation and air circulation and do not use near water. Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. Use only the power adapter and power cords and connection cables designed for this unit. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. ~ 1 ~ Introduction The AV-GM0AQ3-S1 S/PDIF to Stereo Audio Mini Converter offers the easiest way to convert digital S/PDIF, either through typical coaxial RCA or optical TOSLINK connector, to high quality analog stereo audio. With the auto-speed mode detection, AV-GM0AQ3-S1 supports audio sample rates up to 192kHz. AV-GM0AQ3-S1 makes S/PDIF audio accessible to commodity speaker systems, such as PC speakers or old fashion AMP. Stereo audio through analog transmission media, such as cables, may lose the fidelity because of cross-talks and signal decadency! With AV-GM0AQ3-S1 and S/PDIF digital transmission, users can enjoy the high quality audio in the most economic way with the minimal signal loss.
    [Show full text]
  • VP-733 12−Input Proscale™ Presentation Matrix Switcher/4K30 UHD Scaler with Preview & Program Outputs and Legacy, Digital and Hdbaset I/Os
    VP-733 12−input ProScale™ Presentation Matrix Switcher/4K30 UHD Scaler with Preview & Program Outputs and Legacy, Digital and HDBaseT I/Os VP−733 is a 12−input Presentation Matrix Switcher/Dual Scaler for a wide variety of presentation and multimedia applications. VP−733 has HDMI, DisplayPort, HDBaseT and user−definable (universal) analog video inputs (each can be set as computer graphics, composite video, s−Video (Y/C) or component video). It up−scales or down−scales to selectable output resolutions up to 4K and provides glitch−free switching between sources through fast FTB™ (fade−thru−black) switching technology. Independent Program and Preview outputs are available simultaneously, or the unit can be configured for PIP, with all outputs mirrored. Outputs are available on two HDMI connectors, an HDBaseT, a DP, and a 15−pin−HD computer graphics video connector. Rich audio support is also included, with digital audio embedding and de−embedding, as well as 10 analog stereo inputs and analog, S/PDIF, and speaker outputs. FEATURES PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high−quality scaling technology. Fast Fade−Thru−Black (FTB™) Switching - Clean and fast, fade to black for smooth, constant sync glitch−free switching. K−IIT XL™ Picture−in−Picture Image Insertion Technology - Ultra stable picture−in−picture, picture−and−picture, and split screen capability. Dual Scalers - With independent outputs. Preview Mode Button - Toggles between the PIP mode and the PREVIEW mode. 10 Preview/Program Input Buttons - For switching a selected input to the preview output (in PREVIEW mode) and for switching a selected input to the program output.
    [Show full text]
  • COMMON TYPES of VIDEO CONNECTIONS BNC-(Bayonet Neill–Concelman) Connector Is a Miniature Quick Connect/Disconnect Radio Frequency Connector Used for Coaxial Cable
    COMMON TYPES OF VIDEO CONNECTIONS BNC-(Bayonet Neill–Concelman) connector is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. (analog and serial digital interface (HD-SDI, SDI) video signals. This connection can carry analog/composite standard definition signals (no audio) as well as HD-SDI signals with audio. (Up to 300ft without having to be amplified) HDMI (High-Definition Multimedia Interface) is a proprietary audio/video interface for transferring uncompressed video data and compressed or uncompressed digital audio data from an HDMI-compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for analog video standards. Component video is a video signal that has been split into two or more component channels. In popular use, it refers to a type of component analog video (CAV) information that is transmitted or stored as three separate signals. Component video can be contrasted with composite video (NTSC, PAL or SECAM) in which all the video information is combined into a single line-level signal that is used in analog television. Like composite, component-video cables do not carry audio and are often paired with audio cables. Composite viDeo/RCA connector, sometimes called a phono connector or cinch connector, is a type of electrical connector commonly used to carry audio and video signals. The connectors are also sometimes casually referred to as A/V jacks. The name "RCA" derives from the Radio Corporation of America, which introduced the design by the early 1940s for internal connection of the pickup to the chassis in home radio-phonograph consoles.
    [Show full text]
  • Multimedia Outlet System and Quickport® Connectivity Solutions
    Multimedia Outlet System and QuickPort® Connectivity Solutions Guide Innovative Connector Systems For Audiovisual Applications Innovative Connector Solutions For Every Application When you connect to an audio, video, or data system in a conference room, classroom, or living room you expect quality and optimum performance. That expectation is the force that drives the design of our innovative line of audio, video, and data connectors. Leviton connectors and our modular Multimedia Outlet System (MOS) provide outstanding signal quality, cost-effective custom options, and quality connectivity solutions for today’s technology. CONNECTOR APPLICATIONS SOLUTIONS HDMI Projectors, Blu-Ray, Digital Media Players ü VGA Projectors, Laptops, PCs ü DATA Projectors, Laptops, PCs, Wireless Routers ü USB PCs, Laptops, Projectors, Drives, Peripherals ü 3.5 mm PCs, Mobile Media Players, MP3 Players ü Component Video DVD Player, Blu-Ray, Projectors, Media Players ü Composite Video and DVD Player, Media Players, Entertainment Consoles Stereo Audio ü S-Video DVD Player, VCR ü F-Connector Cable Box, Satellite Receiver ü RCA DVD, VCR, Audio ü BNC Broadcast/Professional Video ü Binding Post Speakers ü Banana Jack Stereo Audio ü 1 LEVITON.COM/MOS | 800.722.2082 / +1.425.486.2222 Education Solutions Classrooms have left behind the old days of slide projectors and chalkboards and moved into an era of technology-based educational tools. Leviton’s premier audio, video, and data solutions provide the connectivity needed for everything from multimedia projectors to tablets
    [Show full text]
  • Connecting Video and Audio to Rackmount and Tower Dtective Systems Using Media Composer Adrenaline
    Connecting Video and Audio to RackMount and Tower dTective Systems Using Media Composer Adrenaline Pages 2 - 7: Connecting S-Video Cables Page 8: S-Video Wiring Diagram Pages 9 - 13: Connecting Composite Cables Page 14: Composite Wiring Diagram Page 15 - 18: Connecting Audio Cables You should have the following cables for video: Three S-video Cables Four Composite Cables Five BNC to RCA converters You should have the following cables for audio: One Speaker Tap Two XLR Female to Two XLR Male to RCA Two separate pairs of RCA RCA Female Converters Female Converters Cables ©2005 Ocean Systems. This document cannot be reproduced or transmitted by any means without the express written permission of Ocean Systems. 1 Connecting Your Video Cables to the dTective System Not sure what type of connections to use? Take a look at the images below: The image below shows a typical S-Video deck. If your deck has this style of connectors, you need to follow the instructions for connecting S-VIDEO, as outlined starting on this page. Use S-Video cables if your deck looks like the image above The image below shows a typical consumer grade VCR with composite (RCA) style IN and OUT connectors. If your deck has this style of connectors, you need to follow the instructions for connecting Composite Cables, as outlined on page 9. Use composite cables if your deck looks like the image above (see page 8) Connecting an S-Video Deck to the dTective System What you will need: Three S-video Cables One Composite Cable 2 Step 1: Connecting S-Video Cable to S-Video OUT on rear of deck (VCR) Take one of your three S-Video cables and connect it to the S-Video OUTPUT port on the rear of your deck as shown below: Step 2: Recognizing the TBC The TBC is an external box designed to “lock down” poorly synced video.
    [Show full text]
  • 8-To-1 Video Switches and 1-To-8 Video Splitters
    © 2003. All rights reserved. Black Box Corporation. Black Box Network Services • 464 Basingstoke Road • Reading, Berkshire, RG2 0BG • Tech Support: 0118 965 6000 • www.blackbox.co.uk • e-mail: [email protected] 8-TO-1 VIDEO SWITCHES AND 1-TO-8 VIDEO SPLITTERS Consolidate video output and broadcast it to eight different monitors. Key Features eam these switches and wired remote-control unit we’ve compensate for various cable Models with 4-pin Tsplitters together and you can included in the package. The lengths and signal matching. The mini DIN or BNC consolidate video output and switches feature full 30-MHz units feature DC restoration, so connectors. broadcast it to eight different bandwidth for optimum signal you get the appropriate black monitors, TVs, or projectors. integrity. level, too. Switches include free Use the 8-to-1 S-Video Switch The splitters also give you full Easy to install, each switch remote-control unit. (AC041A) and the 8-to-1 Compo- 30-MHz bandwidth—plus fixed, and splitter features two site Switch (AC042A) to bring manual, and automatic gain connectors on the front for fast Full 30-MHz images from up to eight video controls that make it easy to temporary hookups. bandwidth. sources (VCR, DVD player, satellite receiver, etc.) together in Splitters have fixed, one location. Then use a splitter to manual, and automatic “split” the video output to eight gain controls. different devices. The 8-to-1 S-Video Switch Plug-and-play and 1-to-8 S-Video Splitter Typical Applications installation. (AC043A-R2) support devices that • Use an 8-to-1 S-Video Switch to consolidate S-VHS and ED-BETA use 4-pin mini DIN connectors.
    [Show full text]