Pdatsc-Ip Atsc to Ip Streamer

MODEL PDATSC-IP ATSC TO IP STREAMER

Description

The PDATSC-IP series ATSC 8VSB to IP streamer is an advanced ATSC receiver and re-multiplexer used in digital broadcasting headend systems. The unit is ideal for the for injection of local off air ATSC programming into local digital cable or IP headend systems, like Pico Digital’s market leading CONDOR system. The PDATSC-IP provides six ATSC tuners and two ASI inputs. Each tuner or ASI input is de-multiplexed and available to either of the two output multiplexes. Any input can be selected to be included in any output multiplex. The two output multiplexes are available on both ASI (two each) or IP.

Features • Integrated demodulation and multiplexing functions • Supports PSI/SI (PAT and PMT tables) and • Two ASI inputs available for re-multiplexing PSIP (STT,MGT,VCT tables) • Six ATSC tuner inputs for re-multiplexing • • Accurate PCR re-adjustment • Full front panel control • • SNMP control supported • Two independent output TS multiplexes • Fully compliant with ISO13818 and ATSC A/53 standards • Supports TSoIP output as a mirror of the ASI outputs

System Diagram

ATSC 8VSB 1 Tuner -> TS 1

ASI A1 ATSC 8VSB 2 Tuner -> TS 2 MUX 1 ASI A2

ATSC 8VSB 3 Tuner -> TS 3

ATSC 8VSB 4 Tuner -> TS 4 MPTS 1 IP OUTPUT IP OUT MPTS 1 & 2 ATSC 8VSB 5 Tuner -> TS 5 MPTS 2

ATSC 8VSB 6 Tuner -> TS 6 ASI B1 ASI IN1 ASI -> TS 7 MUX 2 ASI B2

ASI IN2 ASI -> TS 8

Copyright © 2016 Pico Digital Inc. All right reserved. Information in this document is subject to change without notice. Pico Digital and the Pico Digital logo are trademarks of Pico Digital Inc. REV 25.01.16V1 www.amt.com Input Interface 2 ASI and 6 tuners (ATSC 8VSB) Re-Multiplex 2 x MPEG TS re-multiplex PID re-mapping (auto/manual optional) PCR re-stamping Stream grooming Null packet removal PSI/SI (PAT, PMT) tables auto generation and edition PSI/SI (PAT, PMT) and PSIP (STT, MGT, VCT) tables auto generation and edition Input Packet Format 204/188 self-adaption Output Port ASI 2 x independent channels of ASI output (each channel has two ports) (up to 210 Mbps) Ethernet RJ-45, GbE, 2 x IP UDP streams (unicast or multicast) PID Output Range 0 x 0000 to 0 x 1FFF PID Transparent Any PID transparent and mapping achievable Output PID per Input 64 Management Port Ethernet RJ-45, 10/100, Full Duplex, AutoNeg General Dimensions 19” (L) x 16” (D) x 1.75” (H) Weight 13 lbs. Operating Temperature 0 °C to 45 °C Power Supply AC 110 V ± 10 %, 50 Hz / 60 Hz AC 220 V ± 10 %, 50 Hz / 60 Hz Consumption 18 Watts

Ordering Information

PDATSC-IP ATSC to IP Streamer

www.amt.com

Advanced Media Technologies, Inc. · 3150 SW 15th Street Deerfield Beach, FL 33442 (888)888) 293-5856 · (954) 427-5711 · Fax (954) 427-9688