International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft Inter- national Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 January to 31 January 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings ISO/CD 5593 Rolling bearings — Vocabulary ISO/CD 15243 Rolling bearings — Damage and failures — Terms, characteristics and causes TC 10 Technical product documentation ISO/CD 6413 Technical drawings — Representation of splines and serrations TC 12 Quantities and units IEC/CD 80003- Physiological quantities and their units — Part 4: Biology 4 TC 17 Steel ISO/CD 3575 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities ISO/CD 13976 Hot-rolled steel sheet in coils of structural quality and heavy thickness ISO/CD 14590 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability TC 22 Road vehicles ISO/CD 13400- Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 3 802.3
ISO/CD 11452- Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — 3 Part 3: Transverse electromagnetic mode (TEM) cell ISO/CD 19689 Motorcycle and mopeds — Communication between vehicle and external equipment for emissions-related diagnostics — Diagnostic connector and related electrical circuits, specification and use TC 24 Particle characterization including sieving ISO/CD 20998- Measurement and characterization of particles by acoustic methods — Part 3: Guidelines for non-linear theory 3 TC 28 Petroleum products and related products of synthetic or biological origin ISO/CD 4259-1 Petroleum products - Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test
ISO/CD 4259-2 Petroleum products - Precision of measurement methods and results — Part 2: Application of precision data in relation to methods of test TC 34 Food products ISO/CD 749 Oilseed residues — Determination of total ash ISO/CD 18862 Analysis of coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS and GC-MS after derivatization TC 54 Essential oils ISO/CD 8896 Essential oil of caraway (Carum carvi L.) TC 69 Applications of statistical methods ISO/DTS Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs 17503 TC 70 Internal combustion engines ISO/CD 8528-7 Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design
ISO/CD 8528-9 Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations TC 89 Wood -based panels ISO/CD 17064 Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary TC 92 Fire safety ISO/CD 3008-3 Fire Resistance Test — Door and Shutter Assemblies — Part 3: Horizontally oriented TC 104 Freight containers ISO/CD 9897-3 Freight containers — Container equipment data exchange (CEDEX) — General communication codes — Part 3: Tank con- tainers
ISO/CD 9897-4 Freight containers — Container equipment data exchange (CEDEX) — General communication codes — Part 4: Special purpose containers TC 106 Dentistry ISO/CD 19490 Dentistry — Sinus elevator TC 108 Mechanical vibration, shock and condition monitoring ISO/DTS Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic 14837-32 properties of the ground
ISO/CD 21940- Mechanical vibration — Rotor balancing — Part 2: Vocabulary 2 TC 113 Hydrometry ISO/CD 18481 Hydrometry — Liquid flow measurement using end depth method in channels with a free overfall ISO/DTR Surface geophysical surveys for hydrogeological studies 21414 TC 156 Corrosion of metals and alloys ISO/CD 9227 Corrosion tests in artificial atmospheres — Salt spray tests TC 161 Control and protective devices for gas and/or oil burners and appliances ISO/CD 23551- Safety and control devices for gas burners and gas burning appliances — Particular Requirements — Part 8: Multifunctional 8 controls TC 172 Optics an d photonics ISO/CD 9849 Optics and optical instruments — Geodetic and surveying instruments — Vocabulary ISO/CD 8980-1 Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses ISO/CD 8980-2 Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for continuous variation power lenses, includ- ing progressive power lenses
ISO/CD 21987 Ophthalmic optics — Mounted spectacle lenses TC 173 Assistive products for persons with disability ISO/CD 7176-2 Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs TC 189 Ceramic tile ISO/DTR Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles 17870-1
ISO/DTR Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles 17870-2 TC 199 Safety of machinery ISO/DTR Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonomic principles in safety standards 22100-3 TC 201 Surface chemical analysis ISO/DTR Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information 18394 TC 204 Intelligent transport systems ISO/CD 14823 Intelligent transport systems — Graphic data dictionary ISO/CD 19237 Intelligent transport systems — Pedestrian collision mitigation systems — Operation, performance, and verification require- ments TC 205 Building environment design ISO/CD 16817 Building environment design — Indoor environment — Design process for visual environment TC 292 Security ISO/DTS Societal Security — Business continuity management — Guidance for supply chain continuity 22318 TMB Technical Management Board ISO/IEC CD Evaluation of measurement data — Part 5: Examples of uncertainty evaluation Guide 98-5 CASCO Committee on conformity assessment ISO/CD 17034 General requirements for the competence of reference material producers JTC 1 Information technology ISO/IEC CD Information technology — Open Systems Interconnection — The Directory — Part 1: 9594-1
ISO/IEC CD Information technology — Open Systems Interconnection — The Directory — Part 2: Models 9594-2
ISO/IEC CD Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition 9594-3
ISO/IEC CD Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types 9594-6
ISO/IEC CD Information technology — Security techniques — Application security — Part 4: Application security validation 27034-4
ISO/IEC PDTR Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 3: Implementation guidelines 23009-3
DIS circulated
Period from 01 January to 31 January 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/DIS 5631- * Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight 1 conditions (C/2 degrees) 2015-04-20
(Revision of ISO 5631-1:2009)
ISO/DIS 5631- * Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight 2 conditions (D65/10 degrees) 2015-04-20
(Revision of ISO 5631-2:2014)
ISO/DIS 5631- * Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination 3 conditions (D50/2 degrees) 2015-04-20
(Revision of ISO 5631-3:2014)
ISO/DIS * Paper and board — Testing of cores — Part 4: Measurement of dimensions 11093-4 2015-04-09
(Revision of ISO 11093-4:1997) TC 8 Ships and marine technology
ISO/DIS 15364 * Ships and marine technology — Pressure/vacuum valves for cargo tanks 2015-04-30
(Revision of ISO 15364:2007) TC 10 Technical product documentation
ISO/DIS 16016 * Technical product documentation — Protection notices for restricting the use of documents and products 2015-04-13
(Revision of ISO 16016:2000)
ISO/DIS 18388 * Technical product documentation (TPD) — Relief grooves — Types and dimensioning 2015-04-20
TC 17 Steel
ISO/DIS 4955 * Heat-resistant steels 2015-04-20
(Revision of ISO 4955:2005)
ISO/DIS 6931- * Stainless steels for springs — Part 1: Wire 1 2015-04-27
(Revision of ISO 6931-1:1994)
ISO/DIS * Cold-reduced tinmill products — Electrolytic tinplate 11949.2 2015-03-29
(Revision of ISO 11949:1995)
ISO/DIS * Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel 11950.2 2015-03-29
(Revision of ISO 11950:1995)
ISO/DIS * Cold-reduced tinmill products — Blackplate 11951.2 2015-03-29
(Revision of ISO 11951:1995)
ISO/DIS * Steel wire and wire products — Part 2: Tolerances on wire dimensions 22034-2 2015-04-27
(Revision of ISO 22034-2:2007) TC 20 Aircraft and space vehicles
ISO/DIS 18238 * Space systems — Closed loop problem solving management 2015-04-13
ISO/DIS 18257 * Space systems — Semiconductor integrated circuits of space applications — Design require- ments 2015-04-27
TC 22 Road vehicles ISO/DIS * Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 12156-1 1: Test method 2015-04-23
(Revision of ISO 12156-1:2006)
ISO/DIS * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 15: Gas-tight 15500-15 housing and ventilation hose 2015-04-09
(Revision of ISO 15500-15:2001)
ISO/DIS * Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements 10924-1 2015-04-27
(Revision of ISO 10924-1:2009) TC 23 Tractor s and machinery for agriculture and forestry
ISO/DIS 18497 * Agricultural machinery and tractors — Safety of highly automated machinery 2015-04-30
ISO/DIS 5682- * Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer noz- 1 zles 2015-04-27
(Revision of ISO 5682-1:1996)
ISO/DIS 5682- * Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the 2 horizontal transverse distribution for hydraulic sprayer liquid delivery systems 2015-04-27
(Revision of ISO 5682-2:1997)
ISO/DIS 5682- * Equipment for crop protection — Spraying equipment — Part 3: Test method to assess the 3 performance of volume/area adjustment systems for spray systems 2015-04-27
(Revision of ISO 5682-3:1996) TC 29 Small tools
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 1: General survey; correlation of 1 dimensions 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 2: Style F 2 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 3: Style G 3 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 4: Style J 4 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 5: Style K 5 2015-04-08
(Revision of ISO 5611:1995) ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 6: Style L 6 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 7: Style R 7 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 8: Style S 8 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges, type A, for indexable inserts — Dimensions — Part 9: Style T 9 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 10: Style U 10 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 11: Style W 11 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 5611- * Cartridges type A for indexable inserts — Part 12: Style Y 12 2015-04-08
(Revision of ISO 5611:1995)
ISO/DIS 6789- * Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and method 1 for design conformance testing and quality conformance testing — Minimum requirements for 2015-04-16 calibration and calibration certificates (Revision of ISO 6789:2003)
ISO/DIS 6789- * Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration 2 and determination of measurement uncertainly 2015-04-16
(Revision of ISO 6789:2003) TC 30 Measurement of fluid flow in closed conduits
ISO/DIS 5167- * Measurement of fluid flow by means of pressure differential devices inserted in circular cross- 5 section conduits running full — Part 5: Cone meters 2015-04-30
TC 31 Tyres, rims and valves
ISO/DIS 10571 * Tyres for mobile cranes and similar specialized machines 2015-04-09
(Revision of ISO 10571:2011) TC 37 Terminology and other language and content resources
ISO/DIS * Language resource management — Syntactic annotation framework (SynAF) — Part 2: XML 24615-2 serialization (ISOTiger) 2015-04-08
TC 39 Machine tools
ISO 230- * Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning 2:2014/DAmd of numerically controlled axes — Amendment 1 2015-04-27 1 TC 42 Photography
ISO/DIS 19084 * Photography — Digital cameras — Chromatic displacement measurements 2015-04-27
ISO/DIS 19262 * Photography — Archiving Systems — Vocabulary 2015-04-27
TC 43 Acoustic s
ISO/DIS 4869- * Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound 1 attenuation 2015-04-16
(Revision of ISO 4869-1:1990)
ISO/DIS * Underwater acoustics — Quantities and procedures for description and precision measurement 17208-1 of underwater sound from ships — Part 1: Requirements for precision measurements in deep 2015-04-13 water used for comparison purposes (Revision of ISO/PAS 17208-1:2012)
ISO/DIS 18405 * Underwater acoustics — Terminology 2015-04-13
TC 44 Welding and allied processes
ISO/DIS 17777 * Welding consumables — Covered electrodes for manual metal arc welding of copper and cop- per alloys — Classification 2015-04-16
ISO/DIS 19288 * Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of mag- nesium and magnesium alloys — Classification 2015-04-23
TC 46 Information and documentation
ISO/DIS 11799 * Information and documentation — Document storage requirements for archive and library mate- rials 2015-04-20
(Revision of ISO 11799:2003)
ISO/DIS * Information and documentation — Records management — Part 1: Concepts and principles 15489-1 2015-04-24
(Revision of ISO 15489-1:2001) TC 61 Plastics
ISO/DIS * Rigid cellular plastics — Determination of shear strength 1922.2 2015-03-27
(Revision of ISO 1922:2012) TC 67 Mat erials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DIS * Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: 19901-4 Geotechnical and foundation design considerations 2015-04-23
(Revision of ISO 19901-4:2003) TC 72 Textile machinery and accessories
ISO/DIS 18599 * Textile machinery and accessories — Strips for water jet solidification 2015-04-09
ISO/DIS 18600 * Textile machinery and accessories — Web roller cards — Terms and definitions 2015-04-09
TC 76 Transfusion, infusion and injection, and blood processing equipment for med i- cal and pharmaceutical use
ISO/DIS 4802- * Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Deter- 1 mination by titration method and classification 2015-04-13
(Revision of ISO 4802-1:2010)
ISO/DIS 4802- * Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Deter- 2 mination by flame spectrometry and classification 2015-04-13
(Revision of ISO 4802-2:2010)
ISO/DIS * Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass 11418-1 bottles 2015-04-13
(Revision of ISO 11418-1:2005)
ISO/DIS * Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles 11418-2 for syrups 2015-04-13
(Revision of ISO 11418-2:2005)
ISO/DIS * Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles 11418-3 (veral) for solid and liquid dosage forms 2015-04-13
(Revision of ISO 11418-3:2005)
ISO/DIS * Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made 11418-7 of glass tubing for liquid dosage forms 2015-04-13
(Revision of ISO 11418-7:1998) TC 83 Sports and other recr eational facilities and equipment
ISO/DIS * Floating leisure articles for use on and in the water — Part 1: Classification, materials, general 25649-1 requirements and test methods 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 2: Consumer information 25649-2 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 3: Additional specific safety require- 25649-3 ments and test methods for Class A devices 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 4: Additional specific safety require- 25649-4 ments and test methods for Class B devices 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 5: Additional specific safety require- 25649-5 ments and test methods for Class C devices 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 6: Additional specific safety require- 25649-6 ments and test methods for Class D devices 2015-04-16
ISO/DIS * Floating leisure articles for use on and in the water — Part 7: Additional specific safety require- 25649-7 ments and test methods for Class E devices 2015-04-16
ISO/DIS 9838 * Alpine and touring ski-bindings — Test soles for ski-binding tests 2015-04-09
(Revision of ISO 9838:2008) TC 84 Devices for administration of medicinal products and c atheters
ISO/DIS 9626 * Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods 2015-04-30
(Revision of ISO 9626:1991, ISO 9626:1991/Amd 1:2001) TC 94 Personal safety -- Protective clothing and equipment
ISO/DIS 27065 * Protective clothing — Performance requirements for protective clothing worn by operators ap- plying liquid pesticides and for re-entry workers 2015-04-16
(Revision of ISO 27065:2011)
ISO/DIS * Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and 16975-1.2 implementing a respiratory protective device programme 2015-03-22
TC 96 Cranes
ISO/DIS 4301- * Cranes and lifting appliances — Classification — Part 1: General 1 2015-04-27
ISO/DIS 4302 * Cranes — Wind load assessment 2015-04-27
(Revision of ISO 4302:1981)
ISO/DIS * Cranes — Principles for seismically resistant design 11031.2 2015-03-16
TC 106 Dentistry
ISO/DIS 9173- * Dentistry — Extraction forceps — Part 1: General requirements 1 2015-06-16
(Revision of ISO 9173-1:2006)
ISO/DIS 18559 * Dentistry — Extraoral spatulas for mixing dental cements 2015-04-16
ISO/DIS 19429 * Dentistry — Designation system for dental implants 2015-04-20
TC 122 Packaging
ISO/DIS * Packaging — Vocabulary — Part 2: Packaging and the environment terms 21067-2 2015-04-09
(Revision of ISO 21067:2007) TC 131 Fluid power systems
ISO 1219- * Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: 1:2012/DAmd Graphical symbols for conventional use and data-processing applications — Amendment 1 2015-04-27 1 TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/DIS 18831 * Clothing — Digital fittings — Attributes of virtual garments 2015-04-13
TC 136 Furniture
ISO/DIS 9221- * Furniture — Children's high chairs — Part 1: Safety requirements 1 2015-04-27
(Revision of ISO 9221-1:1992)
ISO/DIS 9221- * Furniture — Children's high chairs — Part 2: Test methods 2 2015-04-27
(Revision of ISO 9221-2:1992)
ISO/DIS 24496 * Office furniture — Office chairs — Methods for the determination of dimensions 2015-04-27
(Revision of ISO/TR 24496:2012) TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS * Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktight- 8639.2 ness and prove of structural design of flexible joints 2015-03-16
(Revision of ISO 8639:2000) TC 146 Air quality
ISO/DIS 18158 * Workplace air — Terminology 2015-04-21
ISO/DIS * Air quality — Environmental meteorology — Part 2: Ground-based remote sensing of wind by 28902-2 heterodyne pulsed Doppler lidar 2015-04-27
TC 149 Cycles
ISO/DIS 6699 * Cycles — Stem and handlebar bend — Assembly dimensions 2015-04-09
(Revision of ISO 6699:1990) TC 150 Implants for surg ery
ISO/DIS 13781 * Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro deg- radation testing 2015-04-20
(Revision of ISO 13781:1997, ISO 15814:1999)
ISO/DIS 7206- * Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method 12 for acetabular shells 2015-04-13
ISO/DIS 7206- * Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of re- 13 sistance to torque of head fixation of stemmed femoral components 2015-04-27
ISO/DIS 11491 * Implants for surgery — Test method for impact resistance of ceramic femoral head for hip joint prostheses 2015-04-09
TC 159 Ergonom ics
ISO/DIS 9241- * Ergonomics of human-computer interaction — Part 940: Evaluation of tactile and haptic interac- 940 tions 2015-04-28
TC 163 Thermal performance and energy use in the built environment
ISO/DIS * Energy performance of buildings — Overarching Assessment Procedures. External environment 52010-1 conditions — Part 1: Calculation Procedures 2015-04-23
ISO/DIS * Energy performance of buildings — Calculation of the dynamic thermal balance in a building or 52017-1 building zone — Part 1: Generic calculation procedure 2015-04-30
(Revision of ISO 13791:2012) TC 164 Mechanical testing of metals
ISO/DIS 12135 * Metallic materials — Unified method of test for the determination of quasistatic fracture tough- ness 2015-04-22
(Revision of ISO 12135:2002, ISO 12135:2002/Cor 1:2008) TC 165 Timber structures
ISO/DIS 18324 * Timber structures — Test methods — Floor vibration performance 2015-04-27
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO/DIS 9599 * Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method 2015-04-27
(Revision of ISO 9599:1991) TC 184 Automation systems and integration
ISO/DIS * Robots and robotic devices — Performance criteria and related test methods for service robot 18646-1 — Part 1: Locomotion for wheeled robots 2015-04-17
TC 188 Small craft
ISO * Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 21487:2012/D 2015-04-30 Amd 2 TC 201 Surface chemical analysis
ISO/DIS 19830 * Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy 2015-04-20
TC 206 Fine ceramics
ISO/DIS 18591 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of com- pressive strength of ceramic granules 2015-04-27
ISO/DIS 18608 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature — Evaluation of the resistance to crack propaga- 2015-04-09 tion by notch sensitivity testing TC 213 Dimensional and geometrical product specifications and verification
ISO/DIS 1 * Geometrical product specifications (GPS) — Standard reference temperature for the specifica- tion of geometrical and dimensional properties 2015-04-30
(Revision of ISO 1:2002) TC 220 Cryogenic vessels
ISO/DIS * Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: 21028-1 Temperatures below -80 degrees C 2015-04-23
(Revision of ISO 21028-1:2004) TC 247 Fraud countermeasures and controls ISO/DIS Security management system — Fraud countermeasures and controls 34001.3 2015-03-23
TC 249 Traditional chinese medicine
ISO/DIS 18665 * Traditional Chinese Medicine — Herbal decoction apparatus 2015-04-09
ISO/DIS 18666 * Traditional Chinese medicine — General requirements of moxibustion devices 2015-04-09
TC 263 Coalbed methane (CBM)
ISO/DIS 18871 * Method of determining coalbed methane content 2015-04-21
ISO/DIS 18875 * Coalbed methane exploration and development — Terms and definitions 2015-04-20
JTC 1 Information technology
ISO/IEC DIS * Information technology — Telecommunications and information exchange between systems — 15149-3 Magnetic field area network (MFAN) — Part 3: Relay Protocol for Extended Range 2015-04-17
(Revision of ISO/IEC 15149:2011)
ISO/IEC DIS * Information technology — Software asset management — Part 2: Software identification tag 19770-2 2015-04-09
(Revision of ISO/IEC 19770-2:2009)
ISO/IEC DIS * Systems and software engineering — Systems and software Quality Requirements and Evalua- 25066 tion (SQuaRE) — Common industry Format for Usability — Evaluation Report 2015-04-09
ISO/IEC DIS * Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for securi- 7816-8 ty operations 2015-04-27
(Revision of ISO/IEC 7816-8:2004)
ISO/IEC DIS * Information technology — Identification cards — Conformance test requirements for on-card 18584 biometric comparison applications 2015-04-13
ISO/IEC DIS * Information technology — Security techniques — Requirements for bodies providing audit and 27006 certification of information security management systems 2015-04-21
(Revision of ISO/IEC 27006:2011)
ISO/IEC DIS * Information technology — Security techniques — Guidance on the integrated implementation of 27013 ISO/IEC 27001 and ISO/IEC 20000-1 2015-04-27
(Revision of ISO/IEC 27013:2012)
ISO/IEC DIS * Information technology — Security techniques — Code of practice for information security con- 27017 trols based on ISO/IEC 27002 for cloud services 2015-04-21
ISO/IEC DIS * Information technology — MPEG systems technologies — Part 12: Sample Variants in the ISO 23001-12 Base Media File Format 2015-04-27
ISO/IEC * Information technology — JPEG XR image coding system — Part 5: Reference software — 29199- Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format 2015-04-16 5:2012/DAmd 1
ISO/IEC DIS * Information technology — Automatic identification and data capture techniques — Part 19: Air 29167-19 Interface for security services crypto suite RAMON 2015-04-27
ISO/IEC DIS * Information technology — Database languages — SQL — Part 1: Framework (SQL/Framework) 9075-1 2015-04-20
(Revision of ISO/IEC 9075-1:2011)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) 9075-2 2015-04-20
(Revision of ISO/IEC 9075-2:2011)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 3: Call-Level Interface 9075-3 (SQL/CLI) 2015-04-20
(Revision of ISO/IEC 9075-3:2008)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 4: Persistent Stored Modules 9075-4 (SQL/PSM) 2015-04-20
(Revision of ISO/IEC 9075-4:2011)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 9: Management of External Data 9075-9 (SQL/MED) 2015-04-20
(Revision of ISO/IEC 9075-9:2008, ISO/IEC 9075-9:2008/Cor 1:2010)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 10: Object Language Bindings 9075-10 (SQL/OLB) 2015-04-20
(Revision of ISO/IEC 9075-10:2008, ISO/IEC 9075-10:2008/Cor 1:2010)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 11: Information and Definition 9075-11 Schemas (SQL/Schemata) 2015-04-20
(Revision of ISO/IEC 9075-11:2011)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 13: SQL Routines and Types 9075-13 Using the Java TM Programming Language (SQL/JRT) 2015-04-20
(Revision of ISO/IEC 9075-13:2008, ISO/IEC 9075-13:2008/Cor 1:2010)
ISO/IEC DIS * Information technology — Database languages — SQL — Part 14: XML-Related Specifications 9075-14 (SQL/XML) 2015-04-20
(Revision of ISO/IEC 9075-14:2011)
FDIS circulated
Period from 01 January to 31 January 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 4 Rolling bearings
ISO/FDIS 464 * Rolling bearings — Radial bearings with locating snap ring — Dimensions and geometrical tolerances (GPS) 2015-03-16
(Revision of ISO 464:1995) TC 6 Paper, board and pulps
ISO/FDIS 1762 * Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C 2015-03-15
(Revision of ISO 1762:2001)
ISO/FDIS 2144 * Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C 2015-03-15
(Revision of ISO 2144:1997) TC 8 Ships and marine technology
ISO/FDIS * Ships and marine technology — Offshore wind energy — Ports and marine operations 29400 2015-03-27
TC 10 Technical product documentation
ISO/FDIS 128- * Technical product documentation (TPD) — General principles of presentation — Part 43: Pro- 43 jection methods in building drawings 2015-03-20
(Revision of ISO 2594:1972)
ISO/FDIS * Process diagrams for power plants — Part 1: Specification for diagrams 14084-1 2015-03-20
TC 20 Aircraft an d space vehicles
ISO/FDIS 8177 * Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions 2015-03-14
(Revision of ISO 8177:1986) TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS * Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of 17962 fan exhaust from pneumatic systems 2015-03-16
ISO/FDIS * Tractors and machinery for agriculture and forestry — Serial control and communications data 11783-10 network — Part 10: Task controller and management information system data interchange 2015-03-15
(Revision of ISO 11783-10:2009, ISO 11783-10:2009/CD Amd 1) TC 28 Petroleum products and related products of synth etic or biological origin
ISO/FDIS * Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H 6743-4 (Hydraulic systems) 2015-03-16
(Revision of ISO 6743-4:1999) TC 34 Food products
ISO/FDIS * Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alve- 27971 ograph properties of dough at constant hydration from commercial or test flours and test milling 2015-03-16 methodology (Revision of ISO 27971:2008)
ISO/FDIS * Microbiology of the food chain — Horizontal method for the enumeration of beta-glucuronidase- 16649-3 positive Escherichia coli — Part 3: Detection and most probable number technique using 5- 2015-03-16 bromo-4-chloro-3-indolyl-ß-D-glucuronide (Revision of ISO/TS 16649-3:2005)
ISO/FDIS * Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: 12966-4 Determination by capillary gas chromatography 2015-03-16
(Revision of ISO 5508:1990, ISO 15304:2002) TC 38 Textiles
ISO/FDIS 2061 * Textiles — Determination of twist in yarns — Direct counting method 2015-03-30
(Revision of ISO 2061:2010) TC 43 Acoustics
ISO/FDIS 1683 * Acoustics — Preferred reference values for acoustical and vibratory levels 2015-03-30
(Revision of ISO 1683:2008)
ISO 10140- * Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: 3:2010/FDAmd Measurement of impact sound insulation — Amendment 1 2015-03-16 1 (Revision of ISO 10140-3:2010/DAmd 2, ISO 10140-3:2010/DAmd 3)
ISO/FDIS * Acoustics — Field measurement of sound insulation in buildings and of building elements — 16283-2 Part 2: Impact sound insulation 2015-03-30
(Revision of ISO 140-7:1998, ISO 140-14:2004) TC 44 Welding and allied processes
ISO/FDIS * Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it 3834-5 is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 2015-03-16 3834-3 or ISO 3834-4 (Revision of ISO 3834-5:2005, ISO 3834-5:2005/Cor 1:2007) TC 45 Rub ber and rubber products ISO/FDIS 2028 Synthetic rubber latex — Preparation of dry polymer 2015-03-20
(Revision of ISO 2028:1999) TC 58 Gas cylinders
ISO/FDIS * Gas cylinders — Gas properties and associated classification (FTSC) codes 14456 2015-03-29
TC 61 Plastics
ISO/FDIS * Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile im- 13802 pact-testing 2015-03-16
(Revision of ISO 13802:1999, ISO 13802:1999/Cor 1:2000) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/FDIS * Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and 16903 material selection 2015-03-23
TC 76 Transfusion, infusion and injection, and blood processing equipment for med i- cal and pharmaceutical use
ISO/FDIS * Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis 3826-4 blood bag systems with integrated features 2015-03-23
ISO/FDIS * Infusion equipment for medical use — Part 8: Infusion equipment for single use with pressure 8536-8 infusion apparatus 2015-03-16
(Revision of ISO 8536-8:2004)
ISO/FDIS * Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion 8536-9 equipment 2015-03-16
(Revision of ISO 8536-9:2004)
ISO/FDIS * Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with 8536-10 pressure infusion equipment 2015-03-16
(Revision of ISO 8536-10:2004)
ISO/FDIS * Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infu- 8536-11 sion equipment 2015-03-16
(Revision of ISO 8536-11:2004) TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/FDIS * (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine 21613 2015-03-14
TC 94 Personal safety -- Protective clothing and equipment
ISO/FDIS * Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observa- 12312-2 tion of the sun 2015-03-16
TC 106 Dentistry
ISO/FDIS 6872 * Dentistry — Ceramic materials 2015-03-23
(Revision of ISO 6872:2008)
ISO/FDIS * Dentistry — Test methods for dental unit waterline biofilm treatment 16954 2015-03-23
TC 115 Pumps
ISO/FDIS * Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy 20361 2015-03-16
(Revision of ISO 20361:2007) TC 117 Fans
ISO * Industrial fans — Performance testing in situ — Amendment 1 5802:2001/FD 2015-03-23 Amd 1 TC 121 Anaesthetic and respiratory equipment
ISO/FDIS * Medical devices — Sleep apnoea breathing therapy — Masks and application accessories 17510 2015-03-30
(Revision of ISO 17510-2:2007) TC 131 Fluid power systems
ISO/FDIS 3723 * Hydraulic fluid power — Filter elements — Method for end load test 2015-03-15
(Revision of ISO 3723:1976) TC 134 Fertilizers and soil conditioners
ISO/FDIS 8157 * Fertilizers and soil conditioners — Vocabulary 2015-03-13
(Revision of ISO 8157:1984)
ISO/FDIS * Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and 17318 mercury contents 2015-03-07
ISO/FDIS * Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potas- 17319 sium tetraphenylborate gravimetric method 2015-03-07
TC 138 Plas tics pipes, fittings and valves for the transport of fluids ISO * Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifi- 10931:2005/F cations for components and the system — Amendment 1 2015-03-16 DAmd 1 TC 147 Water quality
ISO/FDIS * Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method 13168 using liquid scintillation counting 2015-03-27
TC 156 Corrosion of metals and alloy s
ISO/FDIS * Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion 16701.2 test involving exposure under controlled conditions of humidity cycling and intermittent spraying 2015-03-16 of a salt solution (Revision of ISO 16701:2003)
ISO/FDIS * Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast 17918 iron for nuclear power plant components by visual inspection and hardness measurement 2015-03-15
TC 164 Mechanical testing of metals
ISO/FDIS * Metallic materials — Instrumented indentation test for hardness and materials parameters — 14577-1 Part 1: Test method 2015-03-16
(Revision of ISO 14577-1:2002)
ISO/FDIS * Metallic materials — Instrumented indentation test for hardness and materials parameters — 14577-2 Part 2: Verification and calibration of testing machines 2015-03-16
(Revision of ISO 14577-2:2002)
ISO/FDIS * Metallic materials — Instrumented indentation test for hardness and materials parameters — 14577-3 Part 3: Calibration of reference blocks 2015-03-16
(Revision of ISO 14577-3:2002) TC 172 Optics and photonics
ISO/FDIS * Optics and photonics — Guidance for the selection of environmental tests 10109 2015-03-20
(Revision of ISO 10109:2014)
ISO/FDIS 8036 * Optics and photonics — Microscopes — Immersion liquids for light microscopy 2015-03-20
(Revision of ISO 8036:2006) TC 181 Safety of toys
ISO/FDIS * Safety of toys — Part 5: Determination of total concentration of certain elements in toys 8124-5 2015-03-15
TC 182 Geotechnics
ISO/FDIS * Geotechnical investigation and testing — Geothermal testing — Determination of thermal con- 17628 ductivity of soil and rock using a borehole heat exchanger 2015-03-23
ISO/FDIS * Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — 18674-1 Part 1: General rules 2015-03-30
TC 184 Automation systems and integration
ISO/FDIS * Automation systems and integration — Integration of advanced process control and optimization 15746-1 capabilities for manufacturing systems — Part 1: Framework and functional model 2015-03-20
TC 204 Intelligent transport systems
ISO * Electronic fee collection — Application interface definition for dedicated short-range communica- 14906:2011/F tion — Amendment 1 2015-03-23 DAmd 1 TC 206 Fine ceramics
ISO/FDIS * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determin- 18558 ing elastic modulus and bending strength of ceramic tube and rings 2015-03-14
TC 211 Geographic information/Geomatics
ISO/FDIS * Geographic information — Procedures for item registration — Part 1: Fundamentals 19135-1 2015-03-16
(Revision of ISO 19135:2005) TC 215 Health informatics
ISO/HL7 FDIS * Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 10781 (EHR FM) 2015-03-30
(Revision of ISO/HL7 10781:2009) TC 220 Cryogenic vessels
ISO/FDIS * Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres 21029-2 volume — Part 2: Operational requirements 2015-03-23
(Revision of ISO 21029-2:2004) TC 221 Geosynthetics
ISO/FDIS * Geosynthetics — Wide-width tensile test 10319 2015-03-16
(Revision of ISO 10319:2008) JTC 1 Information technology
ISO/IEC FDIS * Information Technology — BIOS Protection Guidelines 19678 2015-03-13
ISO/IEC/IEEE * Information technology — Management Information Base (MIB) — Definitions for Ethernet — FDIS 8802-3-1 Part 3-1: 2015-06-20
ISO/IEC/IEEE * Systems and software engineering — Content of life-cycle information items (documentation) FDIS 15289.2 2015-03-22
(Revision of ISO/IEC/IEEE 15289:2011)
ISO/IEC FDIS * Information technology — Systems and software engineering — Application management 16350 2015-03-15
(Revision of ISO/IEC DIS 26500, ISO/IEC DIS 16350) ISO/IEC FDIS * Information technology — Security techniques — A framework for identity management — Part 24760-2 2: Reference architecture and requirements 2015-03-20
ISO/IEC * Information technology — MPEG video technologies — Part 5: Reconfigurable media coding 23002- conformance and reference software — Amendment 1: Graphics tool library (GTL) reference 2015-03-20 5:2013/FDAmd software and conformance 1
ISO/IEC * Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media 23009- presentation description and segment formats — Amendment 1: High Profile and Availability 2015-03-16 1:2014/FDAmd Time Synchronization 1
ISO/IEC FDIS * Information technology — Automatic identification and data capture techniques — Part 10: 29167-10 Crypto suite AES-128 security services for air interface communications 2015-03-14
ISO/IEC FDIS * Information technology — Automatic identification and data capture techniques — Part 12: 29167-12 Crypto suite ECC-DH security services for air interface communication 2015-03-14
ISO/IEC FDIS * Information technology — Automatic identification and data capture techniques — Part 13: Air 29167-13 Interface for security services — Cryptographic suite Grain-128A 2015-03-14
ISO/IEC FDIS * Information technology — Automatic identification and data capture techniques — Part 17: Air 29167-17 interface for security services crypto suite cryptoGPS 2015-03-14