Science Equipment with BioCote® antimicrobial protection Block Heaters Colony Counter Homogenisers Hotplates and Stirrers Incubators Melting Point Apparatus Mixers Rotary Evaporators Rockers and Shakers Water Baths and Purification THE BENCHTOP EQUIPMENT HYGIENE SOLUTION Stuart® Protected By BioCote®

BioCote® utilises silver technology to provide built in antimicrobial protection, so the Stuart® range can help create a safer and more hygienic environment. By reducing levels of bacteria, mould and fungi, your BioCote® protected piece of Stuart® equipment can help reduce the risk of cross contamination and consequently infection within the laboratory.

• Protects against all common bacteria and fungi • Completely safe and effective for the lifetime of the product • Proven silver based technology

BioCote® has been offered exclusively by Stuart® for the Stuart® range of benchtop equipment since 2006.

To find out more about the benefits of BioCote® with the Stuart® benchtop equipment turn to our technical information section.

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION Contents ii Introduction iii Bibby Scientific iv Contact us

1 Block Heaters 7 Colony Counter 9 Flocculators 11 Homogenisers 15 Hotplate Stirrers 17 Hotplates 25 Hotplate Stirrers 35 Stirrers 39 Incubators, Standard, Hybridisation & Shaking 47 Melting Point Apparatus 53 Mixers 55 Rollers 59 Rotators 65 Vortex Mixers 69 Overhead Stirrers 73 Recirculating Coolers 75 Rotary Evaporators 81 Rockers and Shakers 83 Rockers 87 Shakers 93 Water Baths, Static and Shaking 97 Water Purification 107 Technical information 108 BioCote® 120 Index (by model/catalogue number) 122 Index (alphabetical)

i Welcome to the 15th edition of the Stuart® benchtop science equipment catalogue.

Stuart® is constantly striving to improve its technical offering and supply the best technology available at an affordable price. In this catalogue we are very proud to introduce two new additions to the range of melting points, the innovative SMP40 automatic melting point, utilises the latest in digital imagery to accurately identify the melting point of a sample. And the SMP30 replaces the already popular SMP3, the SMP30 has a wealth of improvements over its predecessor such as the patent pending “head up display”.

Stuart® has also expanded into the homogeniser market, offering two models: the SHM1 a compact handheld unit and the SHM2 a more powerful unit. A range of stainless steel probes are available, along with some robust polycarbonate disposable probes.

Since the last catalogue, Stuart® has had a tremendous response to the introduction of BioCote® across the range and continues to offer BioCote® exclusively for its range of bench top science equipment. BioCote® is a patented technology that uses active agent silver to provide long term effective microbial protection.

Stuart® is committed to supporting you for the lifetime of your Stuart® equipment. Our after sales care consists of a dedicated technical service centre and a devoted technical support department available for any application issues that might arise. Our service department is just an e-mail away - [email protected] and our applications scientists are available at [email protected]. The entire Stuart® range is covered by a three year warranty.

Stuart® products are designed, manufactured and marketed in an ISO9001:2008 environment. Every step from new product development to after sales service follows documented and traceable procedures. The result is a quality focused culture committed to total customer satisfaction.

All electrical products produced by Bibby Scientific conform to the latest safety directives including the European CE requirements. For total compliance, all products are tested and approved by a fully accredited external test house. We are compliant with the Waste Electrical and Electronic Equipment directive, WEEE and the Restriction of the use of Certain Hazardous Substances, RoHS introduced in 2006.

All the products featured in this catalogue appear on our website at www.stuart-equipment.com, where you can also download additional useful information including copies of the multi language instruction manuals and copies of the Certificates of Compliance to the EU safety directives. You will also find copies of our ISO certificate.

The products featured in this catalogue are available through a worldwide network of distributors. Technical advice and guidance on product selection is available from qualified scientists and electronic engineers based at Stone.

Our aim is to provide the very best bench top science equipment as well as the highest level of care, before, ii during and after the sale. Some of the most famous names in science...

One of the largest broad based manufacturers of laboratory products worldwide, Bibby Scientific Ltd provides internationally recognised brands with reputations for product quality and high performance. These famous brands are now brought together in a single package to offer an excellent level of quality, service and support.

We manufacture one of the largest ranges of benchtop equipment available under three famous brand names.

The extensive Stuart® range includes blood tube rotators, colony counters, hotplates, hybridisation ovens, rockers, shakers, stirrers and water purification systems.

Techne® is a world leader in the manufacture of temperature control equipment, including water baths, Dri-Block® heaters, and products such as hybridisation incubators and thermal cyclers.

Jenway® makes a wide range of scientific instruments including UV/Vis spectrophotometers, flame photometers, colorimeters, portable and laboratory meters for the measurement of dissolved oxygen, pH, conductivity and specific ions.

iii Bibby Scientific - UK (Group HQ) Beacon Road, Stone, Staffordshire, ST15 0SA, United Kingdom Tel: +44 (0)1785 812121 Fax: +44 (0)1785 810405 e-mail: [email protected] www.bibby-scientific.com

Bibby Scientific - France BP79, 77793 Nemours Cedex, France Tel: +33 1 64 45 13 13 Fax: +33 1 64 45 13 00 e-mail: [email protected] www.bibby-scientific.fr

Bibby Scientific - Italy Via Alcide de Gasperi 56, 20070 Riozzo Di Cerro Al Lambro, Milano, Italy Tel: +39 02 98230679 Fax: +39 02 98230211 e-mail: [email protected] www.bibby-scientific.it

Bibby Scientific - US 3 Terri Lane, Suite 10, Burlington, NJ 08016, USA Tel: +1 609 589 2560 Fax: +1 609 589 2571 e-mail: [email protected] www.techneusa.com

Bibby Scientific - Asia Room 607, Yen Sheng Centre, 64 Hoi Yuen Road, Kwun Tong, Hong Kong Tel: +852 3583 1581 Fax: +852 3583 1580 e-mail: [email protected] www.bibby-scientific.com.cn

Bibby Scientific - Middle East PO Box 27842, Engomi 2433, Nicosia, Cyprus Tel: + 357 22 660 423 Fax: + 357 22 660 424 e-mail: [email protected] iv www.bibby-scientific.com Block Heaters

Stuart® Block heaters are suitable for and clinical for incubation, boiling, inactivation, wet washing, sample concentration, enzyme analysis and other general applications. Suitable for test tubes, , micro- centrifuge tubes, 96 well plates and other small containers.

Page 2 - Analogue Block Heater Page 3 - Digital Block Heaters Page 4 - Digital dual control block heaters Page 5 - Digital three block heaters - Sample concentrator Page 6 - Accessories - Aluminium blocks - Safety covers

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 1 Block Heaters

Block heater, analogue, SBH130

• Analogue control, economical price • 130°C maximum temperature • “Hot” warning light indicates blocks are too hot to touch • Uniform and stable temperatures

Designed for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. With simple analogue setting of temperature for ease of use. "Hot" warning light will flash whenever the block temperature is above 50°C.

Technical Specification

SBH130 SBH130 Temperature range Ambient +8°C to 130°C Temperature stability at 37°C ±0.1°C Uniformity within block at 37°C ±0.1°C Uniformity within block at 130°C ±1°C Dimensions, mm (w x d x h) 235 x 280 x 115 Net weight, kg (without blocks) 2.1 Heater power 300W Electrical supply 230V, 50Hz IP Rating 31

Ordering Information

Model Description

SBH130 Block heater, 2 block, analogue, 130°C

SBH130 with SBH/2

Page 2 Stuart Science Equipment Catalogue Block Heaters

Block heaters, digital, SBH:D

• Choice of 130°C or 200°C maximum temperature • Digital setting and display • Uniform and stable temperatures Construction similar to the SBH130. The bright, easy to read LED display facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature. Excellent temperature stability and uniformity is maintained via sensitive electronic controls. Heats to 100°C in less than 12 minutes.

Technical Specification

SBH130D SBH200D Number of blocks 2 2 Temperature range Ambient Ambient +8°C to 130°C +8°C to 200°C Temp. stability at 37°C ±0.1°C ±0.1°C Uniformity within block at 37°C ±0.1°C ±0.1°C Uniformity within block at 130°C ±1°C ±1°C SBH130D Display resolution 0.1°C 0.1°C Dimensions, mm (w x d x h) 235 x 280 x 115 235 x 280 x 115 Net weight, kg (without blocks) 2.3 2.3 Heater power 300W 300W Electrical supply 230V, 50Hz 230V, 50Hz IP Rating 31 31

Ordering Information

Model Description SBH130D Block heater, 2 block, digital, 130°C SBH200D Block heater, 2 block, digital, 200°C

All models supplied complete with block extraction tool but without aluminium blocks which must be ordered separately. A wide range of blocks is available, see page 6 for details.

SBH130D showing block extraction tool (included)

Stuart Science Equipment Catalogue Page 3 Block Heaters

Block heater, digital, dual control, SBH130DC & SBH200DC

• Two blocks with independent temperature control • Choice of 130°C or 200°C maximum temperature • Construction as SBH:D (see previous page)

Innovative design accommodating two blocks with independent temperature control allowing them to be set at different temperatures. Excellent temperature stability and uniformity is maintained in each block. The unit takes up less space than two block heaters and is ideal for applications where samples have to be transferred between two temperatures very quickly, or for two separate users. SBH200DC

Technical Specification

SBH130DC SBH200DC Temperature range Ambient 50°C to 200°C +8°C to 130°C Temp. stability ±0.1°C ±0.1°C Uniformity within block at 60°C ±0.1°C ±0.1°C Uniformity within block at max. 1°C 1°C Display resolution 0.1°C 0.1°C Dimensions, mm (w x d x h) 310 x 280 x 115 310 x 280 x 115 Net weight, kg 2.9 2.9 Heater power 2 x 150W 2 x 150W Electrical supply 230V, 50Hz 230V, 50Hz IP Rating 31 31

Ordering Information

Model Description SBH130DC Block heater, digital, dual control, 130°C SBH200DC Block heater, digital, dual control, 200°C

Page 4 Stuart Science Equipment Catalogue Block Heaters Block heaters, digital, three block, SBH:D/3

• Extra capacity three block models • Choice of 130°C or 200°C maximum temperature • Digital setting and display • Uniform and stable temperatures The same precise heating and control of the two block SBH:D models but with 50% more capacity of a third block. Excellent temperature stability and uniformity is maintained via sensitive electronic controls. All Stuart® three block heaters are compatible with the Stuart® Sample concentrator, for faster sample concentration.

Technical Specification SBH200D/3 SBH130D/3 SBH200D/3 Number of blocks 33 Temperature range Ambient +8ºC Ambient +8°C to 130ºC to 200°C Temp. stability at 37°C ±0.1°C ±0.1°C Uniformity within block at 37°C ±0.1°C ±0.1°C Uniformity within block at 130°C ±1°C ±1°C Display resolution 0.1°C 0.1°C Dimensions, mm (w x d x h) 310 x 280 x 115 310 x 280 x 115 Net weight, kg (without blocks) 3.2 3.2 Heater power 450W 450W Electrical supply 230V, 50Hz 230V, 50Hz IP Rating 31 31 Sample concentrator, SBHCONC/1

A sample concentrator is a fast and convenient way of concentrating multiple samples in a block heater at once. Utilising a simple gas delivery system the sample concentrator passes gas over the surface of your samples via stainless steel needles. This in combination with the heat from the block heater below produces ideal conditions for fast, efficient evaporation. The gas delivery needles are inserted into a silicon membrane, in virtually any configuration. The height of the sample concentrators gas reservoir is located on an adjustable stand for accurate height control. This combines to make the sample concentrator compatible with any combination of block heater sample vessels. The gas delivery needles are available in either 76mm or 127mm lengths to suit various tube heights, optional PTFE coating is available for corrosive solutions. The Stuart® sample concentrator is only compatible with the SBH130D/3 and SBH200D/3.

Ordering Information

Model Description SBH130D/3 Block heater, 3 block, digital, 130°C SBH200D/3 Block heater, 3 block, digital, 200°C SBHCONC/1 Sample concentrator F7209 Needles, 76mm (pack of 100) SBH200D/3 with F7210 Needles, 127mm (pack of 100) SBHCONC/1 FSC4NCS Needles, 76mm, PTFE coated (pack of 100) FSC4NCL Needles, 127mm, PTFE coated (pack of 100) Note: Needles must be purchased separately.

Stuart Science Equipment Catalogue Page 5 Block Heaters

Aluminium blocks

For use with Stuart® block heaters. Manufactured from anodised aluminium and all with a separate hole to accommodate a if desired. For accurate thermometer measurements please check your thermometer has a suitable immersion depth. All blocks* have dimensions (w x d x h) of 75 x 95 x 50mm and can be used in any combination. Please note all Stuart block heaters will only operate effectively if the full compliment of blocks is present.

Technical specification and ordering information

Tube No. of holes Hole size, (dia. / type) (dia. x depth) mm SHT1/0 Plain block -- SHT1/10 10mm 20 10.5 x 47 SHT1/12 12mm 20 12.6 x 47 SHT1/12/33 12mm 20 12.6 x 33 SHT1/13 13mm 20 13.5 x 47 SHT1/16 16mm 12 16.5 x 47 SHT1/19 19mm 8 19.5 x 47 SHT1/20 2ml tubes 20 10.5 x 33 SHT1/21 Block with removable channels for glass and disposable cuvettes. SHT1/22 1.5ml tubes 20 10.7 x 35 9º taper SHT1/25 25mm 6 25.5 x 47 SHT1/28 28mm 6 28.0 x 47 SHT1/30 0.5ml tubes 30 7.8 9º taper SHT1/30/1 30mm 4 30.1 x 47 SHT1/33 33mm 4 33.2 x 47 SHT1/48 0.2ml tubes 48 6.1 9º taper SHT1/80 0.2ml strip 10 x 8 - SHT1/96 96 well plate - 7.5 9º taper SHT1/384 384 well plate - 3.6 9º taper * Excluding SHT/96 and SHT1/384 (150 x 95 x 61mm).

Safety covers

Tough Perspex® covers are available for Stuart® block heaters. Easily fitted without using tools. Protects the user from ‘spitting’ tubes, and improves temperature stability by preventing drafts. The SBH covers are only compatible with tubes that protude no more than 80mm from the block.

Ordering information

Model Description SBH/2 Safety cover for 2 block models SBH/3 Safety cover for 3 block and dual control models

SBH130 with SBH/2

Page 6 Stuart Science Equipment Catalogue Colony Counter Ideal for all microbiology applications, the Colony counter allows fast and accurate counting of bacterial and mould colonies.

Page 8 - Colony Counter

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 7 Colony Counter Colony counter, SC6

• Pressure sensitive count system • Can be used with any probe or felt tip pen • Digital readout from 0 to 999 • Built-in average count facility • Audible confirmation of each count • Choice of light or dark background

Ideal for all microbiology applications, the SC6 colony counter provides fast and accurate counting of bacterial and mould colonies. The SC6 colony counter is easy to use. Simply place the on the electronic pressure pad and touch the dish with a felt tip pen to mark each colony. The touch pressure causes a count to be registered on the digital display and an audible tone confirms each count made (the sound can be switched on or off as desired).

Any suitable implement – a felt tip pen for example – may be used to apply pressure to the dish. The sensitivity required to register a count can be adjusted to suit with an easy to use dial. This unit can also be used to count multiple plates, and then calculate the average colony count via the built-in averaging facility. SC6 with SC6/1

A choice of either white or black background on which to view colonies is available. The black background aids the viewing of difficult, translucent colonies. Two dish centering adapters are provided to enable the use of 50 to 90mm petri dishes. In addition, the receiver dish may be easily removed for cleaning.

The SC6 colony counter is supplied complete with one Wolffhuegel graticule, one segmentation disc and two centering adapters for 50 to 90mm petri dishes. A choice of magnifiers is available to aid easier counting of smaller colonies.

Technical Specification

SC6 Digital display 3 digit LED Count 0 to 999 Dish size 50 to 90mm Max plate number to average 99 Dimensions, mm (w x d x h) 310 x 300 x 140 Net weight, kg 1.5 Electrical supply 230V, 50Hz, 22W IP Rating 30

Ordering Information

Model Description SC6 with SC6/1/3 SC6 Colony counter SC6/1 1.7x magnifier SC6/1/3 3x magnifier SC6/2 Wolffhuegel graticule and segmentation discs (pack of 10) SC6/3 Spare dish centering adapters (pack of 2) SC6/4 Clear protective discs (pack of 5) SC6/5 Spare receiver dish

Page 8 Stuart Science Equipment Catalogue Flocculators Flocculation is a technique used in water treatment, the process of flocculation is used to remove contaminants from waste water. The contaminants aggregate or clump together to form floc which either floats to the surface or sinks to the bottom. Stuart® offers two flocculators, one portable and one six position unit.

Page 10 - Six sample Flocculator - Two sample Flocculator

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 9 Flocculators Flocculator, SW6

• Accepts six samples • Digital indication of speed and time • Two pre-set programs • Built in illumination for easy viewing of samples

For flocculation (jar) tests on water and effluent samples. The SW6 accommodates up to six samples and is specially designed for repeatable conditions between samples and from run to run. A digital display clearly indicates the speed of the rotational stainless steel paddles, which can be varied from 25 to 250rpm. The digital timer can be set to count down from 1 to 99 minutes. After count down, the paddles stop and an alert sounds. The timer then counts up in minutes in order to measure settling time.

Two pre-set programs allow routine speed and time parameters to SW6 be input and then selected by simply pressing one button. Parameters are stored in the memory and can be recalled or altered at any time. The intuitive touch sensitive keypad is totally flat for easy cleaning. Sample monitoring is assisted by diffused base illumination and black background.

A simultaneous coagulant doser is available as an accessory.

Flocculator, SW5

A mini version of the SW6 that accepts two samples (without timer function). The case incorporates a handle for easy transportation.

Technical Specification

SW5 SW6 No. of samples 26 Speed range 25 to 250rpm 25 to 250rpm Timer No 0 to 99 minutes Pre-set programs 22 Controls keypad Dial Touch sensitive Digital displays LCD LED Dimensions, mm (w x d x h) 320 x 210 x 500 750 x 210 x 460 Net weight, kg 8.6 17 Power 230V, 50Hz, 100W 230V, 50Hz, 200W IP Rating 31 31

Ordering Information

Model Description SW6 Flocculator with 6 rotators (without beakers) SW5 Flocculator with 2 rotators (without beakers) SW6/2 Simultaneous coagulant doser (SW6 only)

SW5

Page 10 Stuart Science Equipment Catalogue Homogenisers Homogenisation is a very common sample preparation step prior to the analysis of nucleic acids, proteins, cells, metabolism, pathogens, and many other targets. The Stuart® range of homogenisers are designed especially for the homogenisation of material, such as tissue, plant, food, soil, and many others.

Page 12 - Handheld Homogeniser Page 13 - Laboratory Homogeniser Page 14 - Probes and Stands

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 11 Homogenisers Handheld Homogeniser, SHM1

• Ergonomic design • Variable motor speed 5,000 to 35,000rpm • Processing range from 0.03ml-100ml • Can be used with robust polycarbonate disposable probes or stainless steel ones

The Stuart® SHM1 is a powerful, variable speed, homogeniser. The high-speed, high-torque motor makes the unit ideal for most homogenising applications. During operation the rotor shaft, which is directly coupled to the motor, spins at up to 35,000rpm. The tube assembly that fits around the shaft remains static and as the rotor shaft spins, within the tube assembly, it creates a pumping action drawing the sample into the open end of the tube, or probe, and forcing it through the windows at the bottom of the tube assembly. This shearing action reduces the particle size of the sample. In addition the speed differential between the rapidly moving rotor, and the static tube assembly creates cavitational force, further dismantling the sample to additionally reduce particle size.

The SHM1 is lightweight making it comfortable to use, and most samples can be processed within thirty seconds. For longer processing the unit can be stand mounted using the included post clamp assembly. SHM1 A stand is available separately.

The SHM1 can accommodate a selection of stainless steel probes for larger and tougher samples and also our polycarbonate disposable probes. Disposable probes are suitable for hard tissues and ideal where cross contamination is of concern. If necessary disposable probes can be easily dismantled and autoclaved up to seven times. Through careful selection of probe type, samples of 0.03ml to 100ml can be processed.

All Stuart® homogenisers are supplied with a tool kit for dismantling the rotor probes for easy cleaning

Technical specification

SHM1

Motor 125 watt Speed control 5,000 to 35,000rpm Processing range 0.03ml to 100ml Sound level <72 db Net weight, kg 0.5 Dimensions, mm (h x Ø) 160 x 55 Electrical supply 220-240V, 50Hz IP Rating 30

Ordering information

Model Description

SHM1/UK Handheld homogeniser, UK plug SHM1/EURO Handheld homogeniser, European plug

SHM1 with SHM/STAND Page 12 Stuart Science Equipment Catalogue Homogenisers Laboratory Homogeniser, SHM2

• Can be handheld or stand mounted • Variable motor speed 5,000 to 28,000rpm • Processing range from 0.03ml-2L • Powerful 700 watt motor

The Stuart® SHM2 with its 700 watt motor is incredibly powerful and versatile. The unit can handle virtually any processing application making it ideal for all homogenising applications such as tissue homogenisation, cell disruption, emulsions, suspensions and protein extraction and with the powerful motor especially suitable for tougher samples and larger volumes. The SHM2 can either be handheld for quick processes or securely stand mounted with a direct connection to the SHM/STAND.

The SHM2 can accommodate a selection of stainless steel probes for larger and tougher samples and also our polycarbonate disposable probes. Disposable probes are suitable for hard tissues and ideal where cross contamination is of concern. If necessary disposable probes can be easily dismantled and autoclaved up to seven times.

SHM2 Through careful selection of probe type samples of 0.03ml to 2L can be processed.

All Stuart® homogenisers are supplied with a tool kit for dismantling the rotor stator generator probes for easy cleaning

Technical specification

SHM2

Motor 700 watt Speed control 5,000 to 28,000rpm Processing range 0.03ml to 2L Sound level <72 db Net weight, kg 1.6 Dimensions, mm (h x Ø) 220 x 70 Electrical supply 220-240V, 50Hz IP Rating 30

Ordering information

Model Description

SHM2/UK Laboratory homogeniser, UK plug SHM2/EURO Laboratory homogeniser, European plug

See page 14 for a selection of probes and accessories

SHM/20 Stuart Science Equipment Catalogue Page 13 Homogenisers

SHM/ADAPT SHM/10 SHM Probes SHM/5

These homogeniser probes have been designed specifically for use with the Stuart® range of homogenisers.

The disposable probes are manufactured from robust polycarbonate, and can either be disposed of after each sample or autoclaved, up to seven times. Ideal where cross sample contamination is of concern. Please note that it is necessary to use the disposable probe adaptor SHM/ADAPT, available separately, to use these probes with both the SHM1 and SHM2. SHM/7 SHM/DISP The stainless steel probes are available in a variety of sizes to suit your processing needs, all are precision engineered and suitable for autoclaving. The stainless steel 5mm probe comes with a flat end, all SHM/20 other probes have a saw tooth end and are capable of processing hard or frozen tissue.

Model SHM/5 SHM/7 SHM/10 SHM/20 SHM/DISP

Size 5mm 7mm 10mm 20mm 7mm Type Flat head Saw tooth Saw tooth Saw tooth Saw tooth Length 75mm 115mm 115mm 195mm 110mm Processing Range 0.03ml – 5ml 0.25ml – 30ml 1.5ml – 100ml 50ml – 2l 0.25ml to 30ml

Ordering information

Model Description

SHM/5 5mm Stainless steel probe SHM/7 7mm Stainless steel probe SHM/10 10mm Stainless steel probe SHM/20 20mm Stainless steel probe SHM/DISP Disposable probes, pack of 25 SHM Stand and Accessories

The SHM/STAND has been purpose built to hold the Stuart® homogenisers, it couples directly to the SHM2 and attaches to the SHM1 , included with SHM1. The stand is heavy duty to remain stable during use and comes with a rubber coated base to help stabilise samples during processing.

Technical Specification

SHM/STAND

Base, mm (w x d x h) 220 x 304 x 11 Rod, mm (Ø x h) 16 x 610 Net weight, kg 3.6

Ordering Information

Model Description

SHM/ADAPT Adaptor for disposable probes SHM/STAND Stand compatible with SHM1 and SHM2 SHM/STAND SHM/TOOL Replacement tool kit to disassemble stainless probes

Page 14 Stuart Science Equipment Catalogue Hotplates & Stirrers Stuart® offers a comprehensive range of hotplate stirrers, hotplates and stirrers, most units are available with either a robust silicon metal alloy or ceramic surface. Ceramic units offer better chemical resistance, and a higher maximum temperature of 450°C.

Page 16 - Introduction Page 17 - Hotplates Page 25 - Hotplate stirrers Page 35 - Stirrers

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 15 Introduction Hotplates

Stuart® offers a comprehensive range of hotplates, most units are available with either a robust silicon metal alloy or ceramic surface. Ceramic units offer better chemical resistance, and a higher maximum temperature of 450°C.

Stuart® hotplates are available in a variety of sizes, with the smallest units having an A4 footprint and surface size of 16 x 16cm, our medium units offer a 30 x 30cm surface while our largest units have 30 x 50cm surface size. Capable of holding up to 30 x 100ml beakers simultaneously. All units are available with simple analogue control and most are also available with more accurate digital control. SB300

In addition to the standard Stuart® hotplates we also offer an acid resistant unit, the CP300. The CP300’s external surfaces consist entirely of PTFE or ceramic to offer excellent chemical resistance. The CP300’s control unit is remote to the hotplate, so it could be housed outside of a fume cupboard for example.

Our CR300 offers infra red heating as an alternative to the traditional resistance element, the advantage of IR is that the heat acts directly upon the sample. Allowing for the fastest heat up times and the most accurate temperature control. Hotplate Stirrers

Hotplate stirrers are ideal for making solutions, combining heat with the action of a . As with the hotplates most units are available with either a robust silicon metal alloy or ceramic surface. The Stuart® hotplate stirrers are also offered in the Standard 16x16cm and 30 x 30cm sizes. As with the other units digital and analogue models are generally available, and additionally the -C162 range of analogue units has the facility for accurate temperature control via the SCT1 temperature controller. Stirrers CD162

All Stuart® stirrers use powerful Neodymium magnets to offer the strongest coupling to the stirrer bar and minimise decoupling. Stuart® stirrers are available in 16 x 16cm and 30 x 30cm. With the addition of the three position unit, the SB161-3 with individual speed control for up to three flasks. Additionally the SM27 is available for field applications and can be powered by standard “D” type batteries.

CB302

Page 16 Stuart Science Equipment Catalogue Hotplate Stirrers Hotplates

Stuart® hotplates are available in a variety of sizes, with the smallest units having an A4 footprint and surface size of 16 x 16cm, our medium units offer a 30 x 30cm surface while our largest units have 30 x 50cm surface size. Capable of holding up to 30 x 100ml beakers simultaneously. All units are available with simple analogue control and most are also available with more accurate digital control.

Page 18 - Analogue Hotplates Page 19 - Digital hotplates Page 20 - Hotplate/stirrer accessories Page 21 - Large capacity analogue hotplates Page 23 - Large capacity digital hotplates - Infra red ceramic hotplate Page 24 - Acid resistant hotplate

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 17 Hotplates Hotplates, CB160 & SB160

• Choice of robust aluminium or chemically resistant ceramic tops • Advanced safety features: - Flashing "Hot" warning light to warn when top plate is too hot to touch - Spillproof design which helps deflect spills away from the controls and the user - Independent safety circuit to protect against overheating • Microprocessor control for accurate temperature setting

General purpose, reliable hotplates with compact A4 footprint. These hotplates have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in ºC rather than an arbitrary 1 - 10 scale. The "Hot" warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. CB160

Model CB160 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Model SB160 has a robust aluminium/silicon alloy top plate which will withstand the knocks of everyday use.

Technical specification

CB160 SB160

Plate material Glass ceramic Al/Si alloy Plate dimensions, mm 160 x 160 160 x 160 Heater power, W 500 700 Max. plate temp, °C 450 325 Dimensions, mm (w x d x h) 190 x 300 x110 190 x 300 x110 Net weight, kg 2.5 2.5 Electricity supply 230V, 50-60Hz 230V, 50-60Hz IP Rating 32 32

Ordering Information

Model Description

CB160 Hotplate, ceramic top, analogue SB160 Hotplate, metal top, analogue

SB160

Page 18 Stuart Science Equipment Catalogue Hotplates Hotplate, digital, SD160

• Accurate digital setting and control of plate temperature • Microprocessor for very accurate temperature control • Simultaneous display of set and actual temperature

A stylish digital hotplate designed for very accurate control of plate temperature. Ideal for microarrays, in-situ hybridisation and specialised electronics applications. The excellent heat transmission of the robust aluminium top plate combined with state of the art digital temperature control gives rapid heating and ensures very even temperature distribution across the whole of the plate. The easy to read digital display indicates both set and actual plate temperature and the encoder control allows rapid and accurate temperature selection. The cast aluminium body is shaped for stability and also helps deflect spills away from the user. The “Hot” warning light will flash whenever the plate temperature is above 50ºC. SD160 An independent safety circuit protects against overheating and internal electronic components are protected against corrosion.

Technical specification

SD160 Plate material Al/Si alloy Plate dimensions, mm 160 x 160 Heater power, W 700 Max. plate temperature, °C 325 Display resolution, °C 1 Temperature variation across plate, °C ±0.2 @ 37°C, ±1.0 @ 150°C Temperature stability, °C ±0.25 Dimensions, mm (w x d x h) 190 x 300 x 110 Net weight, kg 2.5 Electricity supply 230V, 50-60Hz , 700W IP Rating 32

Ordering Information

Model Description SD160 Hotplate, metal top, digital

Stuart Science Equipment Catalogue Page 19 Hotplates Hotplate/stirrers accessories

A complete range of accessories is available for Stuart® hotplates and stirrers (160 x 160mm plate size). From protecting the equipment to bringing solutions for heating different shape vessels, these accessories are the safe and easy way to get the most from your hotplate.

Protective Covers • Fits snugly around the outercase • Economic protection against spillage of chemicals • Resistant to most common chemicals and solvents • Manufactured from silicone rubber

Oil / Water Bath • Robust aluminium construction • Safe alternative to using glass containers • Cool phenolic handles • Four feet to secure the bath onto the plate SB160 with SB16/1 cover • Large 2 litre capacity

Sand Bath • Perfect to dry heat test tubes or any small vessels. • Robust aluminium construction • Four feet to prevent the bath from moving off the plate • 1 litre capacity

Round bottom flask block • Transform hotplates into heating mantles! • Robust aluminium block with securing feet SB16/5 • Four different sized holes for 25ml, 50ml, 100ml and SB16/7 250ml round bottom flasks. • Pre-drilled hole for thermometer or other types of temperature probe

Ordering Information

Model Description

SB16/1 Protection cover hotplate or stirrer only SB16/2 Protection cover stirrer/hotplate analogue SB16/3 Protection cover stirrer/hotplate digital SB16/4 Protection cover hotplate digital SB16/5 Oil / water bath SB16/6 Flask block SB16/7 Sand bath SR1 Retort rod, 600mm x 12mm diameter

SB16/6

Page 20 Stuart Science Equipment Catalogue Hotplates Hotplates, large capacity, CB300 & SB300

• Choice of top plate material • Large square plate area ideal for heating one large vessel or several smaller ones • Accommodates vessels up to 10 litre capacity • Hotplate temperature controlled by easy to use dial • Fitted with a "Hot" warning light which will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains.

Model CB300 has a glass ceramic top which has excellent chemical CB300 resistance and allows much higher plate temperature.

Model SB300 has a robust aluminium/silicon alloy top plate which gives even plate temperature and will withstand the knocks of everyday use.

Technical specification

CB300 SB300

Plate material Glass ceramic Al/Si alloy Plate dimensions, mm 300 x 300 300 x 300 Heated area, mm 200 x 200 300 x 300 Heater power, W 1200 600 Max. plate temp. °C 450 300 Dimensions, mm (w x d x h) 300 x 365 x 105 300 x 365 x 105 Net weight, kg 66 Electricity supply 230V, 50-60Hz 230V, 50-60Hz IP Rating 31 31

Ordering Information

Model Description

CB300 Hotplate, ceramic top, analogue SB300 Hotplate, metal top, analogue SB300

Stuart Science Equipment Catalogue Page 21 Hotplates Hotplates, large capacity, CB500 & SB500

• Choice of top plate material, metal or ceramic • Large plate area ideal for heating multiple vessels • Accommodates up to 30 x 100ml beakers

These large rectangular shaped hotplates are ideal for heating many smaller vessels simultaneously, e.g. in educational use where lots of students require their samples heated at the same time. An easy to use knob located on the front of the hotplate controls the top plate temperature. The robust side arms make the unit very easy to carry.

The large surface area may stay hot for a long time after use, so for maximum safety, a bright red hot warning light will continue to flash until the hotplate is cool. CB500

There are two models to choose from: Model CB500 has a glass ceramic top plate. It is easy to clean in the event of spillage and, due to unique thermal properties, can be heated to very high temperatures giving very fast heat up times.

Model SB500 has an aluminum / silicon alloy top plate. This material has very good conductive properties so will give a very even plate temperature. This means all samples, no matter where they are placed on the hotplate, will be subjected to the same conditions for excellent uniformity and reproducibility.

Technical specification

CB500 SB500

Plate material Glass ceramic Al/Si alloy Plate dimensions, mm 300 x 500 300 x 500 Heated area, mm 250 x 450 300 x 500 SB500 Heater power, W 2250 1500 Max. plate temp. °C 375 300 Dimensions, mm (w x d x h) 520 x 360 x 130 520 x 360 x 130 Net weight, kg 12 12 Electricity supply 230V, 50-60Hz 230V, 50-60Hz IP Rating 31 31

Ordering Information

Model Description

CB500 Hotplate, ceramic top, analogue SB500 Hotplate, metal top, analogue

Page 22 Stuart Science Equipment Catalogue Hotplates Hotplates, digital, SD300 & SD500

• Digital setting and control of plate temperature • Accurate temperature control by microprocessor • Easy to use controls Metal top plate gives very even plate temperature and uniform heating conditions. Hotplates with microprocessor control for accurate monitoring of the plate temperature. Large capacity to accommodate multiple vessels or slides.

Technical specification

SD300 SD500 Plate dimensions, mm 300 x 300 300 x 500 Heater power, W 600 1500 Display resolution, °C 11 Max. plate temp., °C 300 300 Dimensions, mm (w x d x h) 320 x 365 x 105 520 x 360 x 130 SD300 Net weight, kg 6 12 Electricity supply 230V, 50-60Hz 230V, 50-60Hz IP Rating 31 31

Ordering Information

Model Description SD300 Hotplate, digital, 300 x 300mm SD500 Hotplate, digital, 300 x 500mm Hotplate, infra red, ceramic, CR300

• Very efficient heating saving time and energy • Chemically resistant ceramic top • "Hot" warning light for user safety Using a very efficient infra red heater of just 900W power this hotplate will boil 1 litre of water over 30% faster than a conventional ceramic hotplate of 1200W. Ideal for heating large volumes of liquid.

Technical specification CR300 CR300 Plate dimensions, mm 300 x 300 Heated area, mm 140 diameter Heater power, W 900 Dimensions, mm (w x d x h) 300 x 365 x 105 Net weight, kg 4 Electricity supply 230V, 50-60Hz, 900W IP Rating 31

Ordering Information

Model Description CR300 Hotplate, infra red

Stuart Science Equipment Catalogue Page 23 Hotplates

Hotplate, acid resistant, CP300

• A completely new concept in hotplates • PTFE construction with glass ceramic plate for exceptional resistance to chemical attack • Ideal for acid digestions or trace metal analysis • Separate control box connected with a PTFE coated lead

A heated glass ceramic plate mounted in a block of pure PTFE creates a powerful hotplate which is almost impervious to chemical attack, even by concentrated acids. CP300

When boiling acid solutions the CP300 is unaffected by the fumes and splashes which eventually destroy conventional hotplates. The chemical inertness of the PTFE body and ceramic top plate also means that much more aggressive cleaning agents can be used. For example, if all traces of metal must be removed, this hotplate can be washed with concentrated nitric acid!

The separate temperature controller is connected to the hotplate via a 2 metre PTFE coated lead. This allows the hotplate to be located in a fume cupboard and the controller kept outside, well away from the corrosive environment.

The controller is also fitted with a "Hot" warning light that will flash whenever the plate temperature of the hotplate is above 50°C and it will continue to operate when the hotplate is turned off and connected to the electricity supply.

The hotplate has a large 200mm square heated area so is ideal for heating either one large vessel or several smaller ones.

Technical specification

CP300 Plate material Glass ceramic Body material PTFE Plate dimensions, mm 300 x 300 Heated area, mm 200 x 200 Heater power, W 900 Max. plate temperature, °C 400 Hotplate dimensions, mm, (w x d x h) 320 x 360 x 60 Control unit dimensions, mm, (w x d x h) 150 x 160 x 65 Net weight, kg 11 Electrical supply 230V, 50-60Hz IP Rating 43 (Plate) & 30 (Control)

Ordering information

Model Description CP300 Hotplate, acid resistant, including control unit

Page 24 Stuart Science Equipment Catalogue Hotplate/stirrers Hotplate stirrers

Hotplate stirrers are ideal for making solutions, combining heat with the action of a magnetic stirrer. As with the hotplates most units are available with either a robust silicon metal alloy or ceramic surface. The Stuart® hotplate stirrers are offered in the Standard 16 x 16cm and 30 x 30cm sizes.

Page 26 - Analogue hotplate stirrers Page 27 - Three position hotplate stirrer Page 28 - Temperature controller Page 29 - Hotplate stirrers for use with temperature controller Page 30 - Digital hotplate stirrers Page 32 - Large capacity hotplate stirrers Page 33 - Infra red hotplate stirrer

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 25 Hotplate Stirrers Hotplate with Stirrer, CB162 & SB162

• Choice of robust aluminium or chemically resistant ceramic tops • Advanced safety features: - Flashing “Hot” warning light - Spillproof design - Independent safety circuit to protect against overheating • Microprocessor control for accurate temperature setting

Stylish and economical general purpose hotplate stirrers designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The “Hot” warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres *.

Model CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges CB162 stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.

Model SB162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate. Fitting for retort rod and supplied with 2 x 25mm PTFE coated stir bars.

Technical Specification

Model CB162 SB162

Plate material Glass ceramic Aluminium/silicon alloy Plate dimensions, mm 160 x 160 160 x 160 Heated area, mm 120 x 120 160 x 160 Heater power, W 500 700 Max. plate temp. °C 450 325 Stirrer speed, rpm 100 - 1500 100 - 1500 Maximum stirring 15 15 capacity, litres * Dimensions, mm (w x d x h) 190 x 300 x 110 190 x 300 x 110 Net weight, kg 3.4 3.4 Electrical supply 230V, 50Hz, 550W 230V, 50Hz, 750W IP Rating 32 32

Ordering Information

Model Description

CB162 Stirrer/hotplate, ceramic plate, SB162 Stirrer/hotplate, aluminium plate, SR1 Retort rod, 600mm x 12mm diameter SB162

*Based on water contained in a 20 litre glass bottom boiling flask.

Page 26 Stuart Science Equipment Catalogue Hotplate Stirrers Hotplate Stirrer, 3 position, SB162-3

• Three independently controlled stirring/heating positions • Separate "Hot" warning lights for each plate • Powerful magnets for strong magnetic coupling

A space saving and economical unit with 3 independent heating/stirring positions in a footprint only 600 x 270mm.

Easily accommodates 3 x 2 litre beakers.

SB162-3 Unit only requires one power point and is ideal for quality control applications where multiple samples require simultaneous heating and stirring, under the same conditions.

A "Hot" warning light for each plate will flash whenever its temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains.

The top plates are a robust aluminium/ silicon alloy, providing even plate temperature.

Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.*

Supplied complete with 3 x 25mm PTFE coated stir bars.

Technical specification

Model SB162-3

Plate material Al/Si alloy Individual plate dimensions, mm 160 x 160 Heater power, W 3 x 700 Maximum plate temperature. °C 325 Speed range, rpm 100 - 1500 Dimensions, mm (w x d x h) 600 x 270 x 110 Net weight, kg 11 Electricity supply 230V, 50Hz, 2250W IP Rating 32

Ordering Information

Model Description

SB162-3 Stirrer, magnetic, 3 position with heating SR3 Retort rod, 600mm plus bracket

*Based on water contained in a 20 litre glass bottom boiling flask.

Stuart Science Equipment Catalogue Page 27 Hotplate Stirrers Temperature Controller, SCT1

• Accurate liquid temperature control • Built in retort fitting and probe holder • Detachable temperature probe • Bright, easy to read LED display • Compact and light weight • Comprehensive range of accessories

The Stuart® SCT1 temperature controller is the ideal instrument for the accurate temperature control of aqueous or oil based samples in the laboratory. Designed for use with the Stuart® metal top (SC162) or ceramic top (CC162) hotplate stirrers, the SCT1 can be used either as a precise controller of temperature up to a maximum of 200°C or as a digital thermometer up to 325°C.

The SCT1 temperature controller features an in-built clamp allowing the controller to be mounted either on a horizontal or vertical retort rod, providing flexible positioning of the controller. In addition, the stainless steel temperature probe, used to measure the temperature of the sample, is detachable, allowing the main body of the SCT1 temperature controller to be positioned away from potentially damaging fumes. The SCT1 temperature controller regulates the hotplate to accurately control the temperature of the sample, which SCT1 with SCT1/1 Probe Holder is set via the large LED display. When not in use the temperature probe can be held securely by the in-built probe holder.

A range of accessories is available to allow for a complete set up of temperature controller, probe and stirrer hotplate in the laboratory. An accessory probe holder clamps on to a retort rod to allow secure positioning of the temperature probe in the sample. A PTFE probe is also available as an accessory for those applications requiring a chemically resistant probe. The SCT1 is supplied as standard with a stainless steel probe.

Technical Specification

SCT1

Sensor type PT100 Probe Stainless steel Temperature range °C 50 to 200°C Accuracy, °C ±0.5°C Resolution 1°C Dimensions, mm (w x d x h) 90 x 75 x 123 Net weight, kg 0.3 (inc. probe) IP Rating 54

Ordering Information

Model Description

SCT1 Temperature controller, digital SCT1/1 Probe holder SCT1 SCT1/2 PTFE probe

NB: the SCT1 can only be used with the SC162 and CC162. It is not compatible with any other Stuart® hotplate stirrer

Page 28 Stuart Science Equipment Catalogue Hotplate Stirrers Hotplate Stirrers, CC162 & SC162

• Choice of robust aluminium or chemically resistant ceramic tops • For use with SCT1 digital temperature controller • Powerful stirrer • Advanced safety & communication features: • Flashing “Hot” warning light • Spillproof design • Overheat protection • Visible indication of temperature control

The SC162 and CC162 hotplate stirrers are specifically designed for use with the Stuart® SCT1 temperature controller.

Available in a choice of either robust aluminium or chemically resistant ceramic top, each is equipped with a range of advanced safety and communication features. To alert the user, a “Hot” warning light will flash whenever the plate temperature is above 50°C, even when the hotplate is turned off and connected to the mains. The cast aluminium body is shaped for stability and helps deflect spills away from the controls. An Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.

The units automatically detect when the SCT1 temperature controller is plugged in. Communication with the SCT1 temperature controller is CC162 with SCT1 and SCT1/1 visible by an illuminated LED on the hotplate, providing reassurance that the temperature of the sample is precisely controlled at all times. Both CC162 and SC162 models can be used independently of the SCT1 temperature controller as a general purpose hotplate stirrer.

Model CC162 has a glass ceramic top, which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures.

Model SC162 has a robust aluminium/silicon alloy top plate for good heat transmission. A 700W element gives rapid heating and ensures even temperature distribution across the whole of the plate.

Technical Specification

Model CC162 SC162 Plate material Glass ceramic Aluminium/silicon alloy Plate dimensions, mm 160 x 160 160 x 160 Heated area, mm 120 x 120 160 x 160 Heater power, W 500 700 Max. plate temp. °C 450 325 Stirrer speed, rpm 100 to 1500 100 to 1500 Maximum stirring capacity 15 litres 15 litres Dimensions, mm (w x d x h) 190 x 300 x 110 190 x 300 x 110 Net weight, kg 3.4 3.4 Electrical supply 230V, 50Hz, 550W 230V, 50Hz, 750W IP Rating 32 32

Ordering Information

Model Description CC162 Stirrer/hotplate, ceramic plate, probe socket. SC162 Stirrer/hotplate, aluminium plate, probe socket. SC162 with SCT1 and SCT1/1 SR1 Retort rod, 600mm x 12mm diameter

Stuart Science Equipment Catalogue Page 29 Hotplate Stirrers Hotplate Stirrers, digital, CD162 & SD162

• Digital setting and control of both temperature and speed • Supplied complete with temperature probe for accurate control of liquid temperature • Advanced safety features: - Flashing "Hot" warning light - Independent safety circuit to protect against overheating • Choice of robust aluminium or chemically resistant ceramic tops

Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time.

As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimise overshoot and time to set point. An audible alert sounds when the set temperature has been reached.

Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. CD162 For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight.

Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful magnets and motor give stirring speeds up to 1300rpm and volumes up to 15 litres*.

Stirring speed is set and displayed digitally so that exactly the same speed can be used each time for reproducibility. If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides, microarrays and specialist electronics.

There are two models to choose from: Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times. Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature.

With fitting for retort rod and supplied complete with PTFE coated probe and 2 x 25mm PTFE coated stirrer bars

SD162

Page 30 Stuart Science Equipment Catalogue Hotplate Stirrers

Technical Specification

Model CD162 SD162

Plate material Glass ceramic Aluminium/silicon alloy Plate dimensions, mm 160 x 160 160 x 160 Heated area, mm 120 x 120 160 x 160 Heater power, W 500 700 Display resolution °C 11 Max. plate temp. °C 450 300 Max. liquid temp, 200 200 with probe °C Control accuracy with probe °C ±0.5°C ±0.5°C Stirrer speed, rpm 200 - 1300 200 - 1300 Max. stirring capacity, litres * 15 15 Net weight, kg 3.4 3.4 Dimensions, mm (w x d x h) 190 x 300 x 110 190 x 300 x 110 Electrical supply 230V, 50/60Hz, 230V, 50/60Hz, 550W 750W IP Rating 32 32

Ordering Information

Model Description

CD162 Digital stirrer/hotplate, ceramic plate, 550W SD162 Digital stirrer/hotplate, aluminium plate, 750W

Accessories

Model Description

CD162/1 Temperature probe, stainless steel CD162/2 Temperature probe, PTFE SR1 Retort rod, 600 x 12mm

* Based on water contained in a 20 litre flat bottom boiling flask.

Hotplate/stirrers accessories

A wide range of accessories are available for 160 x 160mm stirrers and hotplate stirrers. See page 20 for details.

Stuart Science Equipment Catalogue Page 31 Hotplate Stirrers Hotplates stirrers, large capacity CB302 & SB302

• Choice of robust aluminum or chemically resistant ceramic tops • Flashing “Hot” warning light to warn when top plate is too hot to touch • Independent safety circuit to protect against overheating • Powerful stirring action • Ideal for handling large vessels

Stylish and economical, general purpose stirrer hotplates designed with safety as well as performance in mind. The “Hot” warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.

Model CB302 has a glass ceramic top that has excellent chemical and temperature resistance. The chemical properties make the surface very easy to keep clean and the thermal properties allow CB302 very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns.

Model SB302 has a robust aluminium/silicon alloy top plate. The very good heat transmission of this material gives rapid heating and ensures even temperature distribution across the whole of the plate.

With fitting for retort rod and supplied complete with 2 x 25mm PTFE coated stir bars.

Technical specification

CB302 SB302

Plate dimensions, mm 300 x 300 300 x 300 Heated area, mm 200 x 200 300 x 300 Plate material Glass ceramic Al / Si alloy Heater power, W 1200 600 Max. plate temp. °C 450 300 Stirrer speed, rpm 100 - 1500 100 - 1500 Maximum stirring capacity 15 litres 15 litres Dimensions, mm (w x d x h) 300 x 365 x 105 300 x 365 x 105 Net weight, kg 77 Electrical supply 230V, 50Hz 230V, 50Hz IP Rating 31 31

Ordering Information

Model Description

CB302 Stirrer/hotplate, ceramic plate, 1200W SB302 SB302 Stirrer/hotplate, aluminum plate, 600W SR1 Retort rod, 600 x 12mm

Page 32 Stuart Science Equipment Catalogue Hotplate Stirrers Hotplate Stirrer, with infra red heating, CR302

• Very efficient heating saving time and energy • Powerful magnetic stirring • "Hot" warning light for user safety • Chemically resistant ceramic top

Using a very efficient infra red heater of just 900W this stirrer unit will boil 1 litre of water over 30% faster than a conventional ceramic hotplate of 1200W.

Rare earth magnets give powerful stirring of up to 15 litres with feedback control from 100 to 1500rpm.

This highly efficient hotplate stirrer is ideal when large volumes of liquid need to be heated and stirred, particularly microbiological media.

With fitting for retort rod and supplied with 2 x 25mm PTFE CR302 followers

Technical specification

CR302

Plate dimensions, mm 300 x 300 Heated area, mm 140 dia. Heater power, W 900 Stirrer speed range 100 – 1500 Dimensions, mm (w x d x h) 300 x 365 x 105 Net weight, kg 4 Electricity supply 230V, 50Hz, 950W IP rating 31

Ordering Information

120 Model Description

100 CR302 Hotplate stirrer, infra red

80

60

40

20 Temperature of sample (ºC)

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Heating time (Mins)

CR302 infra red hotplate Conventional ceramic hotplate

Heating rates for 1 litre of water in a 2 litrebeaker.

Stuart Science Equipment Catalogue Page 33 Introducing the SMP40 The future of the melting point is automatic

Every aspect of the SMP40’s design has been These are just some of the novel features that are carefully considered with the melting point user packed into the Stuart SMP40 automatic melting in mind, and as a result the design process has point, visit www.thebestmeltingpoint.com to yielded a number of innovative features. Like the find out what else we have to offer. novel split-design concept or the 5.7” colour touchscreen, which operates the bespoke user The new automatic melting point from Stuart, it interface and allows the user to view the melt as isn’t just an automatic melting point, it’s the it happens or even afterwards. product you’ve been waiting for.

t: +44 (0)1785 812121 Can you afford not to? e: [email protected] w: www.stuart-equipment.com Hotplate/stirrers Stirrers

All Stuart® stirrers use powerful Neodymium magnets to offer the strongest coupling to the stirrer bar and minimise decoupling. Stuart® hotplate stirrers are available in 16 x 16cm and 30 x 30cm. With the addition of the three position unit, the SB161-3 with individual speed control for up to three flasks. Additionally the SM27 is available for field applications and can be powered by standard “D” type batteries.

Page 36 - Portable magnetic stirrer Page 36 - Mini magnetic stirrers Page 37 - Magnetic stirrers Page 38 - Three position magnetic stirrers Page 38 - Heavy duty magnetic stirrer

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 35 Stirrers Stirrer, magnetic, portable, SM27

• Battery powered or mains supply • Tough, compact and light weight • Variable speed up to 1300rpm Powered by long life batteries or mains power this rugged little unit can be used almost anywhere. Ideal for use inside incubators, glove boxes or in the field. Housed in a tough, chemically resistant ABS case and supplied complete with batteries.

Technical specification

SM27 Max speed, rpm 1300

Capacity, litres H2O 1.5 Dimensions, mm (w x d x h) 150 x 160 x 70 Net weight, kg 1.3 Electricity supply 4 x alkaline batteries or 230V, 50Hz Battery type 1.5V, size D, IEC No. LR20 Battery life 600 hours continuous use IP rating 41 SM27

Ordering Information

Model Description SM27 Portable magnetic stirrer complete with 4 x LR20 batteries and 25mm PTFE stir bar SM27/1 Mains adapter, 9V a.c. for 230V, 50Hz supply with UK plug SM27/2 Mains adapter, 9V a.c. for 230V, 50Hz supply with European 2 pin plug SM27/3 Car battery adapter, 12V, Fitted with standard car cigarette/cigar plug

Stirrers, magnetic, mini, SM4

• Compact and lightweight • Up to 1300 rpm Designed for easy fixing to retort rods and scaffolding. Compact metal case has retort clamp for rod diameters up to 16 mm. Electronic speed control up to 1300 rpm. Separate tuning control allows slow speed setting.

Technical Specification

SM4 Speed range 80 to 1300rpm Dimensions, mm (w x d x h) 90 x 160 x 90 Net weight, kg 1 Electrical supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

Model Description SM4 SM4 Stirrer, magnetic, mini

Page 36 Stuart Science Equipment Catalogue Stirrers Stirrers, magnetic, CB161 & SB161

• Choice of robust stainless steel or chemically resistant ceramic tops • Spillproof design which helps deflect spills away from the controls and the user • Powerful magnets for strong stirring action

Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres *.

Model CB161 has a glass ceramic top which has excellent chemical resistance. The chemical properties make the surface very easy to keep clean. The white surface ensures good visibility of colour changes, during titration for example.

Model SB161 has a robust stainless steel top plate that does not produce eddy currents like aluminium and so ensures a very powerful coupling and stirring action.

With fitting for retort rod and supplied complete with 2 x 25mm PTFE coated stir bars.

Technical Specification CB161 CB161 SB161

Plate material Glass ceramic Stainless steel Plate dimensions, mm 160 x 160 160 x 160 Stirrer speed, rpm 100 - 1500 100 - 1500 Max. stirring capacity, litres* 15 15 Dimensions, mm (w x d x h) 190 x 300 x 110 190 x 300 x 110 Net weight, kg 3.2 3.2 IP rating 32 32 Electrical supply 230V, 50Hz, 50W 230V, 50Hz, 50W

Ordering Information

Model Description

CB161 Stirrer, ceramic plate SB161 Stirrer, stainless steel plate

* Based on water contained in a 20 litre flat bottom boiling flask.

CB161

Stuart Science Equipment Catalogue Page 37 Stirrers Stirrer, magnetic, 3 position, SB161-3

• Three independently controlled stirring positions • Powerful magnets for strong magnetic coupling • Stainless steel top plate A space saving and economical unit with three independent stirring positions in a footprint only 600 x 270mm. Easily accommodates 3 x 2 litre beakers. The stainless steel top plate is robust and, unlike aluminium, does not produce eddy currents and so ensures a very powerful coupling and stirring action. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres *. Supplied complete with 3 x 25mm PTFE coated stir bars. SB161-3 Technical specification

SB161-3 Plate material Stainless steel Plate dimensions, mm 550 x 210 Speed range, rpm 100 to 1500 Dimensions, mm (w x d x h) 600 x 270 x 110 Net weight, kg 7 Electricity supply 230V, 50Hz, 150W IP Rating 31

Ordering Information

Model Description SB161-3 Stirrer, magnetic, 3 position SR3 Retort rod, 600mm plus bracket

* Based on water contained in a 20 litre flat bottom boiling flask. Stirrer, magnetic, heavy duty, SB301

• Robust construction with stainless steel top • Powerful magnets for strong magnetic coupling • Stirs up to 30 litres Large and powerful stirrer for use with vessels up to 30 litre capacity. Powerful magnetic drive with electronic feed-back speed control which accurately maintains the set speed. Supplied complete with 1 x 100mm PTFE coated stir bar.

Technical specification

SB301 Plate material Stainless steel Plate dimensions, mm 300 x 300 Speed range, rpm 100 - 600 Stirring capacity, litres 30 Dimensions, mm (w x d x h) 300 x 365 x 105 Net weight, kg 5 Electricity supply 230V, 50Hz, 50W IP Rating 31 SB301 Ordering Information

Model Description SB301 Stirrer, magnetic, heavy duty

Page 38 Stuart Science Equipment Catalogue Incubators Stuart® has a number of incubators specially designed for accurate and reproducible temperature controlled applications. All incubators have state of the art microprocessor detection, setting and control of temperature.

Page 40 - Introduction Page 41 - Microtite plate Page 42 - Hybridisation incubator and Page 43 - Hybridisation Page 44 - Incubator with orbital shaker Page 46 - Total visibility Incubator

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 39 Incubators Incubators

Stuart® has a number of incubators specially designed for accurate and reproducible temperature controlled applications. All incubators have state of the art microprocessor detection, setting and control of temperature. This allows for maximum:

Accuracy: The set temperature is accurately reflected in the actual temperature inside the incubator. The latter is continuously monitored via a thermocouple and if it deviates from the set (e.g. If the door is opened) the energy to the heater is precisely regulated to adjust the actual temperature back to the set point, without overshoot.

Uniformity: It is important that the temperature within the incubator chamber is as uniform as possible so that all samples are subjected to the same conditions. This is achieved by forced air circulation. A fan continuously moves the warm air around the incubator chamber in order to achieve homogeneous conditions.

Stability: Incubators are generally left on for long periods of time. The microprocessor ensures that, once stabilised, the temperature within the incubator chamber remains stable, even when the external ambient temperature varies. This ensures long-term reproducible results.

Resolution: The result of outstanding accuracy, uniformity and stability means a display resolution of 0.1ºC is found on all Stuart® incubators. This means that the chamber temperature can be set to one-tenth of a degree.

Models within the Stuart® range include:

• Benchtop incubator specifically designed for warming microtitre plates, details on page 41 • Hybridisation incubator for blotting techniques, details on pages 42 to 43 • Completely transparent acrylic incubators designed for a variety of germination and general incubation applications, details on page 46 • The SI500 shaking incubator with built-in orbital shaker. Details on pages 44 - 45.

Page 40 Stuart Science Equipment Catalogue Incubators Incubator, for microtitre plates, SI19

• Compact unit • Ideal for microtitre plates and petri dishes • Laminar flow air circulation • Digital setting and display of temperature • Convenient upward opening door • Stainless steel interior

Specially designed for use with microtitre plates, which can be difficult to incubate. In conventional incubators, when 4 or more plates are placed on a shelf, they block the air circulation, which can seriously impair temperature distribution.

The Stuart® SI19 Incubator overcomes this problem with forced air circulation, which blows preheated air across the shelves rather than just through them. Microtitre plates are also prone to drying out during incubation. The SI19 overcomes this with a water tray to increase the humidity within the chamber.

The bright LED display indicates temperature and the encoder SI19 control allows rapid and accurate temperature setting. An integral over-temperature protection system automatically tracks the set temperature and controls the heater in the event of a fault. Error codes are displayed if a fault has occurred or if the set temperature has been interrupted.

An acrylic upwards opening door provides excellent access to the interior. The stainless steel chamber features 4 shelves each accommodating 6 plates (or 12 stacked in 2 layers). Shelves are captive and slide out for easy loading.

Technical Specification

SI19

Nominal capacity 20 litres Temperature range Ambient + 8°C to 80°C Temperature fluctuation (at 37°C) ±0.5°C Temperature variation ±0.5°C Display type LED Display resolution 0.1°C Internal dimensions, mm (w x d x h) 250 x 230 x 200 Overall dimensions, mm (w x d x h) 380 x 380 x 435 Net weight, kg 24 Electrical supply 230V, 50Hz, 280W IP Rating 30

Ordering Information

Model Description

SI19 Incubator, microtitre plate

SI19

Stuart Science Equipment Catalogue Page 41 Incubators Hybridisation, incubator & shaker, SI30H

• Compact design • Rotisserie and in one unit • Up and over door for accessibility • Accurate temperature control • Advanced safety features • Variable speed control

A very versatile 20 litre hybridisation incubator and combined rocker shaker which only requires a minimum of bench space. The incubator temperature is accurately set via the easy to use encoder controls and displayed by a bright LED. Forced air circulation combined with microprocessor control means outstanding temperature uniformity.

The ‘safety first’ design includes an over-temperature protection system that automatically tracks the set temperature and controls the heater in the event of a fault. The smart system displays error codes indicating a fault has occurred or if the set temperature has been interrupted. The incubator also cuts power to the motor if it overheats or stalls.

The incubator has a stainless steel interior, whilst the door is SI30H constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The ‘up and over’ door mechanism gives excellent access to the incubator.

The SI30H is supplied with a rotisserie that accepts 7 x 40mm diameter bottles. It rotates at speeds variable between 2 and 10rpm inside the incubator. It also acts as a stand when removed from the incubator. Accessory rotisseries are available to hold 2 x 75mm diameter glass bottles. Conversion of the unit to a rocker shaker is fast and easy. Simply remove the rotisserie and pull forward the platform located at the rear of the incubator.

The gentle rocking action is ideal for the washing stage of most hybridisation procedures. Rocking speed is fully variable allowing optimisation depending on application. A range of hybridisation bottles are available made from tough Pyrex® glass and leak proof PTFE faced screwcaps (see page opposite).

Page 42 Stuart Science Equipment Catalogue Incubators

Technical specification

SI30H

Nominal capacity 20 litres Temperature range Ambient + 8°C to 80°C Temperature fluctuation (at 37°C) ±0.1°C Temperature variation ±0.5°C Display type LED Display resolution 0.1°C Number of rotisseries 1 Rotational speed range 2 to 10rpm Rocker speed range 5 to 70 oscillations / minute Internal dimensions, mm (w x d x h) 286 x 230 x 200 Overall dimensions, mm (w x d x h) 380 x 380 x 435 Net weight, kg 24 Electrical supply 230V, 50Hz, 350W IP Rating 30

Ordering information

Model Description

SI30H Hybridisation incubator / shaker supplied with 1 x rotisserie SI20H/1 SI20H/1 Spare rotisserie for 7 x 40mm diameter bottles SI30H (holds 6 plus 1 in the centre) SI20H/2 Accessory rotisserie for 2 x 75mm diameter bottles

Hybridisation bottles

Bottle hybridisation minimises probe volumes, reduces reagent volumes and enhances signal intensity. Made from Pyrex® borosilicate glass Stuart® hybridisation bottles are robust and can easily withstand the temperatures of the most rigorous hybridisation techniques. The thermoplastic polyester caps are very rigid and will not distort during repeated heating in the incubator which can lead to leakage. The seal is made by a PTFE faced insert that covers the entire inside of the cap making very good contact with the glass thread. Available in three sizes, each bottle comes complete with cap and a care leaflet.

SI20H/4 SI20H/5 Technical specification and ordering information SI20H/3 Model Overall O.D. I.D Wall length thickness

SI20H/3 260mm 40mm 33.6mm 3.2mm SI20H/4 260mm 75mm 68.6mm 3.2mm SI20H/5 170mm 40mm 33.6mm 3.2mm

Stuart Science Equipment Catalogue Page 43 Incubators Incubator with orbital shaker, SI500

• Combined incubator shaker • Digital display for temperature and speed • Integrated timer • Unique retractable platform for easy loading and unloading • Angle adjustable accessory tube racks, with patent pending Magnalock coupling system available • Communications enabled for external temperature measurement

This combined shaker and incubator is ideal for scientists doing cell culturing procedures, especially suspension culture applications. It is compact enough to be positioned on the laboratory bench.

The shaker provides an orbital shaking motion, adjustable between SI500 30 to 300rpm with a gentle start action. The shaking speed is microprocessor controlled and set via the digital LED control panel. The incubator also incorporates a versatile digital timer which can be set from 1 second to 9 days. After the timer has counted down the shaking action will stop and an alert will sound, as a safety feature the incubator will continue to run.

The incubator features smoked acrylic windows in the door and to both sides to allow easy visibility of the samples. The incubator temperature is set via a separate bright LED display, encoder control ensures that the temperature can be quickly set between ambient temperature +5°C and 60°C. Forced air circulation ensures uniform heating of the load.

The SI500 platform has a versatile clamping system which secures SI500/3 most sizes and mixtures of flask up to 1 litre capacity. Typically, the SI500/2 platform will accommodate the following Erlenmeyer flasks: 12 x 250 ml, or 9 x 500 ml or 6 x 1000 ml.

The incubator features smoked acrylic windows in the door and to both sides to allow easy visibility of the samples. SI500/1

The unit features a retractable platform. Under normal use the platform is locked in place but whilst accessing your samples the platform can be drawn forward out of the chamber to allow easiest access to samples at the back of the incubator.

The SI500 also features a USB connection and dedicated software to enable long term monitoring of the incubator temperature, i.e. over weekends.

A wide range of stainless steel accessory racks are available to hold 1.5ml, 15ml, 30ml and 50ml sample tubes, the angle of the tubes can be adjusted up to 30°. Accessory racks are held to the orbiting platform by a patent pending Magnalock system, allowing quick coupling and de-coupling without tools.

Page 44 Stuart Science Equipment Catalogue Incubators

Technical Specification

SI500

Temperature range Ambient + 5°C to 60°C Temperature display resolution 0.1°C Temperature precision ± 0.5°C Temperature fluctuation ± 0.5°C Temperature variation <0.5°C Speed range 30 to 300rpm Orbit diameter, mm 16 Platform size, mm 335 x 335 Internal dimensions, mm (w x d x h) 422 x 408 x 297 Maximum vessel height, mm 250 Maximum load, kg 10 Overall dimensions, mm (w x d x h) 450 x 474 x 522 Net weight, kg 30 Heater power, W 250 SI500 Electrical supply 230V, 50Hz, 300W IP Rating 31

Ordering Information

Model Description

SI500 Incubator, orbital shaker SI500/1 Tube rack, 1.5ml x 64 microtubes SI500/2 Tube rack, 15ml x 25 centrifuge tubes SI500/3 Tube rack, 50ml x 12 centrifuge tubes SI500/4 Tube rack, 16 x 30ml plastic universal containers

SI500

Stuart Science Equipment Catalogue Page 45 Incubators Incubator, total visibility, SI60 & SI60D

• Full visibility of samples • Easy access to working chamber • Many applications: - Plant propagation - Humidity tests - Simulation of tropical conditions - Incubation of complete instruments - Corrosion testing • Choice of analogue or digital control

Constructed from clear Acrylic® polymer to give total visibility of samples at all times. SI60 Designed for easy access with hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.

For analogue model SI60, setting the temperature is via a calibrated knob. For digital model SI60D, setting the temperature is more accurately achieved via the LCD display. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37ºC. Additionally there is a temperature safety cut-out set at 72ºC.

The incubator is supplied flat packed, for assembly at point of use. Assembly is simple and requires only a screwdriver.

Technical Specification

SI60 & SI60D

Temperature range Ambient +5ºC to 60ºC Temperature fluctuation at 37ºC ±0.1ºC Temp. variation between shelves ±0.3ºC Nominal volume 60 litres Internal dimensions, mm (w x d x h) 450 x 380 x 380 Overall dimensions, mm (w x d x h) 600 x 390 x 390 Net weight, kg 11.2 SI60D & SI60/2 Electrical supply 230V, 50Hz, 350W IP Rating 30

Ordering Information

Model Description

SI60 Incubator, total visibility, analogue SI60D Incubator, total visibility, digital SI60/1 Acrylic® base plate SI60/2 Plastic coated shelf/rack system with two shelves

Page 46 Stuart Science Equipment Catalogue Melting Point Apparatus

Stuart® has become the laboratory name in melting points. Offering solutions to determine high accuracy melting points. Stuart® has a complete range of melting points, from manual to automatic units, to accommodate all users.

Page 48 - Automatic Melting Point Page 50 - Advanced Melting Point Page 51 - Digital Melting Point Page 52 - Analogue Melting Point - Melting Point Tubes

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 47 Melting Point Apparatus Automatic melting point apparatus, SMP40

• Maximum temperature 400°C • Utilises latest technology in digital imaging • 5.7” colour VGA touch screen display • Unique split design concept • Integrated cooling, 350°C to 50°C in 10 minutes

The SMP40 automatic melting point uses the latest technology in digital image processing, to accurately identify the melt of up to three samples simultaneously. The unit comes with a 5.7” colour VGA display, on which the melt can be watched real time, or the SMP40 melt video will automatically be saved as an AVI file that can be reviewed later, either on the unit or via PC, providing traceability long after the sample has gone. The result can also be overridden if for any reason you don’t agree with the result calculated by the image processing algorithm.

The SMP40 is fully programmable via the touch screen display, once the user has set the plateau temperature they can select the ramp rate, between 0.1 and 10°C in 0.1°C increments. During use a library of preset methods can be built up to streamline the method input for repeat measurements. For materials where the user is unaware of an approximate melting point, and therefore unable to set the plateau temperature, the SMP40 can be used in rapid melt mode. During rapid melt mode a fast scan of the full temperature range is undertaken to provide an approximate melt temperature, then a method will be automatically programmed with the appropriate plateau temperature to allow a more accurate measurement to be carried out. SMP40 Split Concept

The SMP40 has an innovative split design concept, the unit can be used as normal or the control side and the melt side can be separated, allowing for the maximum in footprint flexibility. After the samples have been loaded the melt side of the unit can be placed at the back of the bench or even in a fume cupboard to catch any potentially dangerous fumes. Once the unit has been split the control panel side can be used in two orientations, either landscape Max. or portrait to allow the perfect viewing angle whether you are sat or Steady Variable ramping rate Automatic Heating cooling stood at the bench, the screen automatically changes orientation rate with the unit. Plateau Plateau

The unit can store up to 200 result files with videos, if required data can be easily transferred from the unit to a flash memory drive or PC via one of the USB connectors.

The unit has been designed to include a number of other useful TEMPERATURE C

features such as slots to accommodate pre-prepared samples and a Temperature ºC draw to house your unused melting point tubes. Also included in the Ambient Ambient draw is a handy glass cutter, which can be used to accurately cut TimeTIME tubes in half quickly and cleanly for users who prefer to use half tubes.

All units are supplied with a calibration certificate showing individual serial numbers for traceability. The SMP40 conforms to Pharmacopeia and GLP.

Page 48 Stuart Science Equipment Catalogue Melting Point Apparatus

Technical specification

SMP40

Number of samples 3 simultaneously Temperature range Ambient to 400°C Temperature resolution 0.1°C Display 5.7” Colour VGA touch screen Ramp rates 0.1-10°C in 0.1°C increments Temperature sensor PT1000 Platinum resistance Memory 200 results with video Cool down time 350-50°C ~10 mins Heat up time 50-350°C ~ 6 mins Oven control Closed loop PID Flash memory/PC interface USB Sample level 2-3mm in 50mm or 100mm length SMP40 Side Profile capillaries Electrical supply 120V / 230V, 50-60Hz Temperature units °C, °F, K Dimensions, mm (h x d x w) 175 x 210 x 328 Net weight, kg 3.2 IP Rating 30

Ordering Information

Model Description

SMP40 Melting point apparatus, complete with pack of 100 melting point tubes, closed at both ends. SMP2/1 Glass melting point tubes, closed at both ends, pack of 100

SMP40 Interface - Measurement Screen

SMP40 Interface - Homepage

Stuart Science Equipment Catalogue Page 49 Melting Point Apparatus Melting point apparatus, advanced, SMP30

• Maximum temperature 400°C • Patented head up display • Integrated cooling 350°C to 50°C in 12 minutes • Large easy to read user friendly interface

The SMP30 can take three samples simultaneously within the optimised heating block with a maximum temperature of 400°C. A plateau facility is included with variable ramp rate between 0.5 and 10°C in 0.1°C increments. The tubes are illuminated with bright white LED’s to give the clearest view of the samples during the melt. The block has been designed for easy access for cleaning, the front of the head is fully removable to allow full access to the micro furnace. SMP30

The SMP30 has a large clear back lit alphanumeric LCD display, running the menu system which clearly guides you through the melting process with comprehensive directions. It is possible to record up to 8 events in memory for each of the three sample tubes.

The SMP30 features the patent pending head up display, this unique feature displays a floating image of the block temperature, visible through the eyepiece, in front of the tubes. The head up display eliminates the need for the user to keep switching their gaze between the tubes and the temperature display.

To allow the most comfortable viewing angle the SMP30 features a two stage head adjustment. The head can then be stored safely back within the body of the unit for storage. The design of the unit has lots of other useful features such as slots for storing pre-prepared samples and a storage draw to hold a container of capillary tubes.

An accessory printer is available separately to produce a written record of the melt, and all units are supplied with a calibration certificate showing individual serial numbers for traceability. SMP30 Technical specification

SMP30 Number of samples 3 Temperature range Ambient to 400°C Temperature resolution 0.1°C Display 40 x 4 LCD Ramp rates 0.5-10°C in 0.1°C increments Temperature sensor PT1000 Platinum resistance Memory 8 results per tube Accessory printer available Yes Date/time display Yes Cool down time 350-50°C ~12 mins Heat up time 50-350°C ~ 6 mins Electrical supply 120V / 230V, 50-60Hz, Language variants English, German, French, Italian Temperature units °C Dimensions, mm (w x d x h) 325 x 200 x 170 Net weight, kg 3.6 IP Rating 30

Ordering information Model Description SMP30 Melting point apparatus, complete with pack of 100 melting point tubes, sealed at one end. SMP10/1 Glass melting point tubes, sealed at one end, pack of 100 SMP30/1 Accessory printer with power supply Head up display as seen through viewfinder Page 50 Stuart Science Equipment Catalogue Melting Point Apparatus Melting point apparatus, digital, SMP10

• Digital selection & display of temperature • High accuracy • Easy to operate with plateau facility • Ideal for educational use • Supplied with calibration certificate

The SMP10 has been designed with safety and ease of operation in mind making it ideal for use in education. The temperature is selected, measured and displayed digitally making it accurate and negating the need for a thermometer.

Two samples can be tested simultaneously. They are viewed via a magnifying lens with clear observation aided by built in illumination. Extendible back feet allow the unit to be operated at the optimum viewing angle. Full access to the block aids cleaning.

The simple to follow instructions are printed directly on the SMP10 instrument in most European languages for ease of use. To operate simply select a plateau temperature via the three digit display and press ‘start’. The unit quickly heats up and remains at the selected plateau temperature until the user is ready to start the test. Insert the sample tubes and press ‘start’. The unit then heats slowly so that the melt can be observed. When the sample is seen to melt, note the temperature on the display. Press ‘stop’ to end heating and cool the block.

Supplied complete with calibration certificate showing individual serial number for traceability.

Technical Specification

SMP10

Number of samples 2 Temperature range Ambient to 300°C Temperature accuracy ± 1.0°C at 20°C ± 2.5°C at 300°C Display Three digit LED Display resolution 1ºC Sensor Platinum resistance PT100 Ramp rates 20°C per minute to plateau 2°C per minute to melt Dimensions, mm (w x d x h) 160 x 220 x 170 Net weight, kg 1.8 Electrical supply 230V, 50Hz, 75W IP Rating 30

Ordering Information

Model Description

SMP10 Melting point apparatus, complete with pack of SMP10 fascia 100 melting point tubes, closed at one end. SMP10/1 Glass melting point tubes, closed at one end, pack of 100

For standard melting points see page 115.

Stuart Science Equipment Catalogue Page 51 Melting Point Apparatus Melting point apparatus, analogue, SMP11

• Easy to operate - ideal for educational use • Supplied with safe spirit filled thermometer • Economical price

With new safety features and easy to use, the SMP11 is ideal for use SMP11 in education. Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.

With a manually adjustable heating rate, the SMP11 will rapidly heat samples up to 20°C per minute to the melt temperature and up to the maximum temperature of 250°C. Accurate readings to within 1°C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10°C per minute.

Up to three samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument.

Technical Specification

SMP11 Number of samples Up to 3 Temperature range 50ºC to 250°C Heating rate 1 to 10°C per minute Dimensions, mm (w x d x h) 370 x 140 x 110 Net weight, kg 1.7 Electrical supply 230V, 50Hz, 50W IP Rating 40

Ordering Information

Model Description SMP11 Melting point apparatus, complete with thermometer and pack of 100 melting point tubes (open both ends) SMP11/1 Spare thermometer, spirit filled, 0°C to 250°C SMP1/2 Cooling plug (brass) for rapidly reducing heating block temperature after use Melting point tubes

Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.

Ordering information

Model Tube type SMP1/4 Open both ends SMP2/1 Sealed both ends SMP10/1 Sealed at one end

Page 52 Stuart Science Equipment Catalogue Mixers There are many laboratory processes that require sample agitation, Stuart® offers one of the most thorough ranges available including, rotators, tube rollers and vortex mixers.

Page 54 - Introduction Page 55 - Rollers Page 59 - Rotators Page 65 - Vortex Mixers

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 53 Introduction

With the ever increasing variety of vessels being used in the sciences, Stuart® offers a range of mixing products to give you the ideal solution. Each entry also has a symbol to show the type of mixing (see page 112 for guide). Some products also have a timer. Rollers A roller mixer is ideal for a gentle mixing action. It consists of a number of motor driven rollers which rotate at either a fixed or variable speed. When the samples are placed between these rollers, typically in tubes or bottles, they are gently rolled. During this rolling action, simultaneously a rocking action is applied whereby the rollers are gently raised and lowered at one end. This increases the effectiveness of the mixing whilst still providing a subtle mixing SRT9D action. Ideal for mixing blood samples, viscous substances and liquid- solid suspensions where minimum aeration is required or for aiding de-frosting of samples.

Rotators Mixing by rotation is more vigorous than a roller mixer, typically the sample, in either tubes or bottles, are turn end-over-end. Rotators can be based on a rotisserie type design whereby a single axis is rotated and samples are attached to this by a variety of different methods. Alternatively, a rotator can take the form of a disk rotated around its central point; samples are attached to the edge of the disk, this form of rotator is less vigorous than the rotisserie style as the angle of the disk can be lowered to lessen the end over end action. Speed adjustment is available in both types to alter the severity of the mixing action. Ideal for aerating cultures, keeping biological samples in suspension and for general mixing applications including smaller samples held in 1.5ml micro tubes. SB2 & SB3/2 Vortex Mixers Vortex mixers have an electric motor with the drive shaft oriented vertically and attached to a cupped rubber piece mounted slightly off-centre. As the motor runs the rubber piece oscillates rapidly in a circular motion. When a or other appropriate container is pressed into the rubber cup (or touched to its edge) the motion is transmitted to the liquid inside and a vortex is created. Most vortex mixers have variable speed settings and can be set to run continuously, or to run only when downward pressure is applied to the rubber piece. It is an ideal mixing action for re-suspending pellets, vortexing cell suspensions or drug extractions, mixing tissue samples, enzymatic and RIA assays. SA8 with cradle

All mixers are provided with BioCote® antimicrobial protection. See page 108 for more information.

Page 54 Stuart Science Equipment Catalogue Mixers Rollers A roller mixer is ideal for a gentle mixing action. It consists of a number of motor driven rollers which rotate at either a fixed or variable speed. When the samples are placed between these rollers, typically in tubes or bottles, they are gently rolled. During this rolling action, simultaneously a rocking action is applied whereby the rollers are gently raised and lowered at one end. This increases the effectiveness of the mixing whilst still providing a subtle mixing action. Ideal for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required or for aiding de-frosting of samples.

Page 56 - Personal size Rollers Page 57 - Laboratory size Rollers Page 58 - SRT Stacking system

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 55 Rollers Rollers, SRT6 & SRT6D

• Rocking and rolling action for complete mixing • Choice of analogue fixed speed or digital variable speed model • Six roller design with small footprint • Designed for continuous quiet operation • Can be used in cold rooms or in incubators

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. The six roller design has a small space saving footprint. There is a choice of two models:

• Analogue model SRT6 with fixed speed of 33rpm operated by easy to use on / off switch • More advanced digital model SRT6D with variable speed from 5 to 60rpm and versatile timer which can be set from 1 second to 9 hours.

Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units SRT6 can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C.

Both roller mixers are robustly constructed and designed for easy cleaning, having plastic rollers and a drip tray to collect accidental spillages.

Most sizes of tubes, Bijoux, Universals and bottles can be accommodated. An accessory stacking system is available where bench space is at premium, see page 58.

Roll only versions are also available, these have had the rocking action removed, please note it is not possible to switch a unit to roll only after production.

Technical Specification

SRT6 SRT6D

Number of rollers 6 6 Speed 33rpm 5 to 60rpm Amplitude 16mm 16mm Maximum load, kg 5 5 Controls Analogue Digital Timer No Yes Roller size, mm (l x d) 340 x 30 340 x 30 Dimensions, mm (w x d x h) 565 x 240 x 110 565 x 240 x 110 Net weight, kg 5.1 5.1 SRT6D Electrical Supply 230V, 50Hz, 50W 230V,50Hz, 50W IP Rating 20 20

Ordering Information

Model Description

SRT6 Roller mixer, 6 rollers, analogue control, fixed speed SRT6D Roller mixer, 6 rollers, digital control, variable speed SRT6ROLL Roll only version, 6 rollers, analogue control, fixed speed SRT6DROLL Roll only version, 6 rollers, digital control, variable speed

Page 56 Stuart Science Equipment Catalogue Rollers Rollers, SRT9 & SRT9D

• Rocking and rolling action for complete mixing • Choice of analogue fixed speed or digital variable speed model • Nine roller design for larger capacity • Designed for continuous quiet operation • Can be used in cold rooms or in incubators

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. The larger capacity nine rollers design is ideal for high throughput laboratories.

There is a choice of two models: • Analogue model SRT9nb with fixed speed of 33rpm operated by easy to use on / off switch • More advanced digital model SRT9D with variable speed from 5 to 60rpm and versatile timer which can be set from 1 second to 9 hours.

Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in SRT9 cold rooms down to 4°C.

Both roller mixers are robustly constructed and designed for easy cleaning, having plastic rollers and a drip tray to collect accidental spillages.

Most sizes of tubes, Bijoux, Universals and bottles can be accommodated. An accessory stacking system is available where bench space is at premium, see page 58.

Roll only versions are also available, these have had the rocking action removed, please note it is not possible to switch a unit to roll only after production.

Technical Specification

SRT9 SRT9D

Number of rollers 9 9 Speed 33rpm 5 to 60rpm Amplitude 16mm 16mm Maximum load, kg 55 Controls Analogue Digital Timer No Yes Roller size, mm (l x d) 340 x 30 340 x 30 Dimensions, mm (w x d x h) 565 x 360 x 110 565 x 360 x 110 Net weight, kg 6.9 6.9 Electrical Supply 230V, 50Hz, 50W 230V,50Hz, 50W IP Rating 20 20

Ordering Information SRT9D Model Description

SRT9 Roller mixer, 9 rollers, analogue control, fixed speed SRT9D Roller mixer, 9 rollers, digital control, variable speed SRT9ROLL Roll only version, 6 rollers, analogue control, fixed speed SRT9DROLL Roll only version, 6 rollers, digital control, variable speed

Stuart Science Equipment Catalogue Page 57 Rollers Stacking system

• For use with SRT rollers • Allows up to 3 tube rollers to be stacked to save space • Works by magnets - no need for any tools • Fitted in minutes • Easy to dismantle

The SRT stacking system comprises of four magnetised stacking blocks that are designed to allow rollers to be stacked on top of one another, thus saving valuable bench space. Up to three rollers can be stacked in virtually any combination. Fitted in seconds without any need for tools the stacking blocks are SRT/STACK stacking system easy to move into the optimum position where they hold the rollers securely in position by magnetism. They are equally as easy to dismantle if required for storage or cleaning purposes.

Ordering Information

Model Description

SRT/STACK Stacking system for rollers (4 x stacking blocks)

NOTE: In order to stack three rollers, 2 x SRT/STACK are required SRT/STACK stacking blocks

Page 58 Stuart Science Equipment Catalogue Mixers Rotators

Mixing by rotation is more vigorous than a roller mixer, typically the sample, in either tubes or bottles, are turn end- over-end. Rotators can be based on a rotisserie type design whereby a single axis is rotated and samples are attached to this by a variety of different methods. Alternatively, a rotator can take the form of a disk rotated around its central point; samples are attached to the edge of the disk, this form of rotator is less vigorous than the rotisserie style as the angle of the disk can be lowered to lessen the end over end action.

Page 60 - Fixed speed rotator Page 61 - Variable speed rotator Page 62 - Rotator drive unit - drum Page 63 - Two platform drum - Figure 8 drum Page 64 - Bottle holder drum - Microcentrifuge tube drum

Stuart Science Equipment Catalogue Page 59 Rotators Rotator, fixed speed, SB2

• Fully adjustable mixing angle • Constant speed of 20rpm • Choice of tube holders to hold a number of different sized tubes • Simple on/off control switch • Spillage tray

The SB2 gives gentle but effective mixing, ideal for keeping biological samples in suspension e.g. blood The rotator can be used in incubators up to 60ºC and in cold rooms down to 4ºC.

The rotator has a constant speed of 20rpm and the angle of rotation is fully adjustable, from horizontal for minimal mixing to vertical for full end-over-end mixing.

An integral tray catches any spillage from the rotating tubes. A choice of six tube holders are available to fulfil most applications. It is possible to use two tube holders simultaneously with our dual holder accessory.

Technical Specification

SB2

Speed range Fixed to 20rpm Dimensions, mm (w x d x h) 200 x 270 x 230 Net weight, kg 3.2 Electrical supply 230V, 50Hz, 50W SB2 & SB3/2 IP Rating 31

Ordering Information

Model Description

SB2 Rotator, fixed speed

SB3/2 Tube holders SB3/4

• Choice of six types • Quick and easy loading and removal of tubes • End-over-end or rolling action

Ordering Information

Model Description Tube Max. no. SB3/3 diameter of tubes

End-over-end action SB3/1 Micro tube holder 10 to 11.5 mm 40 SB3/2 Test/blood tube holder 9 to 20mm 20 SB3/3 50ml centrifuge tube holder 25 to 35 mm 12 Rolling action SB3/4 Culture tube holder 12mm 63 SB3/5 Culture tube holder 16mm 63 SB3/6 Culture tube holder 26mm 30 Accessories SB2/DUAL Multiple tube holder accessory SB3/1 SB3/1/PC Spare clips for SB3/1 holder

Page 60 Stuart Science Equipment Catalogue Rotators Rotator, variable speed, timer, SB3

• Fully adjustable mixing angle • Variable speed • Digital timer • Choice of tube holders to hold a number of different sized tubes • Spillage tray

The SB3 is ideal for aerating cultures, keeping biological samples in suspension and for general mixing applications. The rotator can be used in incubators up to 60ºC and in cold rooms down to 4ºC.

The rotator has a variable speed of 2 to 40rpm for gentle rolling or vigorous mixing of samples and the angle of rotation is fully adjustable, from horizontal for minimal mixing to vertical for full end-over-end mixing.

A digital timer and speed display allow procedures to be accurately repeated for optimal results.

A tray catches any spillage from the rotating tubes. Scale to measure mixing angle for future reference or continuity. A choice of six tube holders are available to fulfil most applications. It is possible to use two tube holders simultaneously with our dual SB3 holder accessory.

Holder must be ordered separately (see page 60)

Technical Specification

SB3

Speed range 2 to 40rpm Speed control Digital Timer Yes Net weight, kg 3.2 Dimensions, mm (w x d x h) 200 x 270 x 230 Electrical supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

Model Description

SB3 Rotator, variable speed, timer

SB3 with 2 x SB3/1 and SB2/DUAL

Stuart Science Equipment Catalogue Page 61 Rotators Rotator, drive unit, STR4

• Highly versatile - accepts a choice of 5 drums • Built in timer • Variable speed control 6 to 60rpm

The STR4 rotator drive unit is used in conjunction with a wide range of drums designed to take different sizes and types of vessels. The five drums are designed to give different mixing actions and are listed on pages 62 to 64.

Speed of rotation is variable from 6 to 60rpm for a range of mixing applications.

For added convenience a built in analogue timer can be set from 10 to 60 minutes. Alternatively the unit can be set for continuous STR4 operation.

Technical Specification

STR4

Maximum load, kg 3 Rotation speed 6 to 60rpm Dimensions, mm (w x d x h) 650 x 250 x 250 Net weight, kg 6.4 Electrical Supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

Model Description

STR4 Rotator drive (n.b. vessel holding drum not included and must be ordered separately)

Drum, test-tube holder, STR4/1

Designed to rotate test-tubes in an end-over-end movement. Comprises a square metal drum which can accommodate a choice of plates fitted with tube clips. STR4 with STR4/1 plus clip plates Up to four plates can be mounted on the drum. Easy fitting via a push button mechanism.

Ordering Information

Model Description

STR4/1 Drum to hold test tube clip plates STR1/1 Clip plates for 12 x 12mm tubes (per pair) STR1/2 Clip plates for 10 x 16mm tubes (per pair) STR1/3 Clip plates for 8 x 9mm tubes (per pair) STR1/4 Clip plates for 7 x 24mm tubes (per pair)

Page 62 Stuart Science Equipment Catalogue Rotators Drum, two platforms, STR4/2

This drum accepts 2 x 250ml conical flasks or reagent bottles for end over end mixing. The samples are securely held in place by a collar that fits around the neck of the flask or bottle and is secured by two washers.

Ordering Information

Model Description

STR4/2 Drum with two platforms to hold flasks or bottles

STR4 with STR4/2

Drum, figure 8, STR4/3

Drum holds the vessel at a 45º angle so it is rolled and turned end over end at the same time giving a vigorous figure of 8 mixing action.

The sample container is retained by a strong Velcro strap. Accepts almost any container including reagent bottles, powder jars and paint tins up to 200mm in length and 120mm diameter.

Ordering Information

Model Description

STR4/3 Drum with figure 8 mixing action

STR4 with STR4/3

Stuart Science Equipment Catalogue Page 63 Rotators Drum, bottle holder, STR4/4

This drum consists of a four segment Perspex® cradle. Each segment is fitted with a fully adjustable Velcro® strap to hold bottles and other containers up to 120mm diameter and up to 300mm in length.

Ordering Information

Model Description

STR4/4 Drum with four segment cradles holding up to four bottles

STR4 with STR4/4

Drum, microcentrifuge tube, STR4/5

Designed for thorough end over end mixing of 1.5ml microcentrifuge tubes. Four racks (included) can be held securely in the drum. Each rack can accommodate up to 60 microcentrifuge tubes, making this unit ideal for a high throughput laboratory.

Ordering Information

Model Description

STR4/5 Drum with four segment cradles and four tube racks SW2/1 Spare rack for 60 x 1.5ml tubes

STR4 with STR4/5

Page 64 Stuart Science Equipment Catalogue MixersVortex Mixers Vortex Mixers

Vortex mixers have an electric motor with the drive shaft oriented vertically and attached to a cupped rubber piece mounted slightly off-centre. As the motor runs the rubber piece oscillates rapidly in a circular motion. When a test tube or other appropriate container is pressed into the rubber cup (or touched to its edge) the motion is transmitted to the liquid inside and a vortex is created. Most vortex mixers have variable speed settings and can be set to run continuously, or to run only when downward pressure is applied to the rubber piece. It is an ideal mixing action for re-suspending pellets, vortexing cell suspensions or drug extractions, mixing tissue samples, enzymatic and RIA assays.

Page 66 - Variable speed - Accessory pack Page 67 - Fixed speed vortex mixer Page 68 - Mini vortex mixer

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 65 Vortex Mixers Mixer, vortex, variable speed, SA8

• Variable speed control between 200 and 2500rpm • Intermittent or continuous mode • Stable low profile body • Robust die-cast construction

Mixing speed can be selected from 200rpm for very gentle mixing to 2500rpm for vigorous agitation. Choose between ‘touch’ mode or continuous operation simply by pressing a button on the fascia. Robust die-cast body avoids unnecessary movement during use. The ergonomic low profile design makes everyday vortexing comfortable for the user.

Integral retort rod fixing allows vessels to be secured above the vortex action for long-term mixing. SA8 The SA8 can mix a variety of other vessels when used in conjunction with the SA8/1 accessory pack detailed below.

Technical Specification

SA8

Speed 200 to 2500rpm Orbit diameter, mm 4.2 Touch mode Yes Continuous mode Yes Dimensions, mm (w x d x h) 135 x 215 x 78 Net weight, kg 3.2 Electrical supply 90 – 240V, 50 / 60Hz, 20W IP Rating 31

Ordering Information

Model Description

SA8 Vortex mixer, variable speed

Accessory pack

For use with SA8 above, pack contains: 1 x plastic cradle for standard microtitre plate 1 x circular foam insert for beakers and flasks (up to 500ml capacity) 1 x rectangular foam insert (holds 8 x 0.2ml, 8 x 0.5ml and 16 x 1.5ml microcentrifuge tubes) 1 x solid rectangular foam insert (blank for custom holes)

Ordering Information

Model Description

SA8/1 Accessory pack (for use with SA8 only) SA8 with cradle

Page 66 Stuart Science Equipment Catalogue Vortex Mixers Mixer, vortex, fixed speed, SA7

• Fixed speed 2500rpm • Robust die-cast construction • Automatic press start

For rapid mixing of samples contained in test-tubes, small flasks and bottles. Starts automatically when the rubber cup is depressed and stops once vessel is removed.

Heavy die-cast body for stability during use.

Technical Specification

SA7

Speed Fixed 2500rpm Orbit diameter, mm 4.2 Dimensions, mm (w x d x h) 135 x 215 x 78 SA7 Net weight, kg 3.2 Electrical supply 90 – 240V, 50 / 60Hz, 20W IP Rating 31

Ordering Information

Model Description

SA7 Vortex mixer, fixed speed

Stuart Science Equipment Catalogue Page 67 Vortex Mixers Mixer, vortex, mini, SA3

• Compact size • Push switch operation • Low budget price

A simple fixed speed vortex mixer. Features polypropylene cup and suited for use with tubes up to 16mm diameter. Push and hold switch operation.

The mini-vortex mixer is very economically priced - perfect for the budget conscious laboratory.

Technical Specification

Model Description

Speed Fixed 2500rpm Dimensions, mm (w x d x h) 80 x 140 x 80 SA3 Net weight, kg 1.3 Electrical Supply 230V, 50Hz, 50W

Ordering Information

Model Description

SA3 Vortex mixer, mini

Page 68 Stuart Science Equipment Catalogue Overhead Stirrers

Overhead stirrers are useful where mixing of a higher viscosity material is required, the three models available from Stuart® increase in torque to suit even the most demanding laboratory application.

Page 70 - General purpose overhead stirrer - High performance overhead stirrer Page 71 - Dual torque overhead stirrer Page 72 - Stands - Stirrer Paddles

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 69 Overhead Stirrers

Overhead stirrer, general purpose, SS10

• Used with volumes up to 15 litres • Aqueous to low viscosity liquids • Keyless chuck • Quiet running • Budget price

Easy to use general purpose overhead stirrer suitable for day to day laboratory use with aqueous and low viscosity liquids such as light oils, up to 15 litres. With good speed control and overload protection usually found in more advanced models, the SS10 represents excellent value for money.

Overhead stirrer, high performance, SS20

• Used with volumes up to 25 litres • Low to medium viscosity liquids • Hollow shaft SS10 • Keyless chuck

A powerful stirrer designed for demanding laboratory applications. Suitable for stirring liquids up to medium viscosity, including oils and microbiological media, up to 25 litre capacity. Features a hollow shaft arrangement to facilitate easy adjustment of paddle height. Advanced overload protection and sophisticated, responsive speed control.

Technical Specification

SS10 SS20 Speed range 100 - 2000rpm 100 - 2000rpm Max. viscosity 10,000mPas 20,000mPas Torque at chuck 15Ncm 27Ncm Chuck range 1.5 - 13mm dia 1.5 - 13mm dia. Hollow shaft No 3 - 8mm dia. Dimensions, mm (w x d x h) 85 x 175 x 230 85 x 195 x 230 Net weight, kg 2.7 3.2 Electrical supply 230V, 50 / 60Hz, 50W 230V, 50 / 60Hz, 80W IP Rating 42 42

Ordering Information

Model Description

SS10 Overhead stirrer, general purpose SS20 Overhead stirrer, high performance SS20

Page 70 Stuart Science Equipment Catalogue Overhead Stirrers Overhead stirrer, dual torque, SS30

• Used with volumes up to 40 litres • Medium to high viscosity liquids • Two modes of torque for extra power • Keyless chuck

A versatile heavy duty stirrer with the ability to mix high viscosity liquids, including heavy oils, up to 40 litres. This stirrer has two modes of operation, which can be easily alternated, offering maximum versatility.

Mode 1 has high torque at lower speed for stirring very viscous liquids. Mode 2 has lower torque at higher speed and provides brisk mixing of medium viscosity liquids.

Advanced overload protection and sophisticated, responsive speed control. The stirrer also features a hollow shaft for use with long paddles.

Technical Specification

SS30

Speed range 50 - 500 / 100 - 2000rpm SS30 Max. viscosity 40,000mPas Torque at chuck 90 / 27Ncm Chuck range 1.5 - 13mm dia. Hollow shaft 3 - 8mm dia. Dimensions, mm (w x d x h) 85 x 195 x 230 Net weight, kg 3.8 Electrical supply 230V, 50 / 60Hz, 80W IP Rating 42

Ordering Information

Model Description Viscosity mPas Torque Ncm SS30 Overhead stirrer, dual torque 100 50,000 80 A range of stands and stirrer paddles are also available. MODE 1 See page 72. 60

40 See page 116 for S.I. Base and S.I. Derived Units. 20,000 20 10,000 MODE 2 0 SS10 SS20 SS30 Torque profile of Stuart overhead stirrers

Stuart Science Equipment Catalogue Page 71 Overhead Stirrers

Stands

Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.

Technical Specification

SS10/1 SS10/2

Base, mm (w x d x h) 400 x 350 x 25 550 x 480 x 25 Rod, mm (dia. x l) 16 x 700 25 x 850 Net weight, kg 7.6 20.2

Ordering Information

Model Description

SS10/1 Stand, general purpose SS10/2 SS10/2 Stand, heavy duty

Stirrer paddles SS10/1

Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter paddle rod. The heads screw on and off the rods, so they can be mixed and matched depending upon stirring requirements. This gives maximum versatility and value for money. For complete paddle, order rod plus head(s).

Technical Specification

Paddle rods

SS10/5 SS10/6 Diameter 8mm 8mm Length 350mm 550mm

Paddle heads SS10/11 SS10/14 SS10/10 SS10/12 SS10/13

SS10/10 SS10/11 SS10/12 SS10/13 SS10/14 Total width 60mm 94mm 80mm 50mm 60mm

Ordering Information

Model Description SS10/5 Paddle rod, 350mm SS10/6 Paddle rod, 550mm SS10/10 Small paddle head SS10/11 Large paddle head SS10/12 Large propeller head ( 2 blade ) SS10/13 Small propeller head ( 4 blade ) SS10/14 Anchor paddle head

Page 72 Stuart Science Equipment Catalogue Recirculating Coolers

The two recirculating coolers offered by Stuart® can be used with water to provide a more environmental solution to cooling, if used with a lower temperature cooling medium such as ethylene glycol they can also be used to offer more powerful sub ambient cooling.

Page 74 - Small capacity recirculating cooler - Large capacity recirculating cooler

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 73 Recirculating Coolers Recirculating cooler, SRC3

• Digitally set temperature • Easy to read LED display • Quiet operation • Powerful 450W cooling capacity • Safety cut out feature

The recirculating cooler offers powerful cooling for an external device. By accurately controlling the temperature of your cooling medium down to -20ºC, efficiency of operations such as condensing can be greatly improved. A recirculating cooler is not only much more powerful than conventional water cooling, but is also an ideal alternative when water consumption is an issue for economical, environmental or practical reasons. The SRC3 provides a powerful cooler with a compact footprint suitable for mounting on or under a bench. The LED digital display clearly shows the current temperature of the cooling medium to ±2ºC, while the set temperature is revealed by a one button press. The unit has a dedicated drain for easy emptying and cleaning. It also incorporates a built in safety alarm to indicate an overload relay for the refrigeration unit. A dust filter is incorporated and can be accessed without tools via the removable front panel. SRC3

Recirculating cooler, SRC14

With all the features of the SRC3 the SRC14 is ideal where larger volumes are required, or when extra cooling capacity is needed, electron for example. The unit is floor standing with lockable easy roll castors to ensure excellent mobility.

Technical Specification

SRC3 SRC14 Cooling capacity 450W at 10ºC 1200W at 10ºC Temperature range -20 to +20ºC -20 to +30ºC Control accuracy ±2ºC ±2ºC Bath capacity 3 litres 14 litres Pump rate 10 litres / minute 18 litres / minute Dimensions, mm (w x d x h) 206 x 401 x 540 354 x 384 x 851 Net weight, kg 25 41 Electrical supply 230V, 50Hz 230V,50Hz IP Rating 32 32

Ordering Information

Model Description SRC3 Recirculating cooler, 3 litre capacity SRC14 Recirculating cooler, 14 litre capacity

For a guide to cooling liquid selection see page 115.

SRC14

Page 74 Stuart Science Equipment Catalogue Rotary Evaporators

Rotary evaporators are commonly used for separating solvents, the Stuart® range offers simple control and a variety of glassware configurations, vertical, diagonal and condensing depending on your requirements. All configurations are available with plastic coated glass.

Page 76 - Rotary evaporators Page 78 - Glassware accessories and spares Page 79 - Water bath Page 80 - Vacuum Pump - Recirculating cooler

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 75 Rotary Evaporators Rotary evaporators

• Simple, counterbalanced lift mechanism • PTFE/glass liquid pathway for chemical inertness • Sparkless induction motor • Long life graphite impregnated PTFE vacuum seal • Efficient flask and vapour tube ejection system

Rotary evaporators are distillation units that incorporate an efficient with a rotary flask system. As the flask containing the solvent is rotated it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory waterbath (see page 79).

They are the ideal tools for many everyday laboratory applications including:-

• Concentration of solutions • Reclamation of solvents • Vacuum drying of wet solids • Degassing liquids

The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum. This reduces the boiling point of the solvents and removes the vapour phase making the process much more efficient. See page 80 for details of the vacuum pump. Each unit is also provided with an easy to use vacuum release and a continuous feed system, which allows more solvent to be drawn into the rotating Florentine flask without the need to stop the operation. There are three patterns of condenser available depending on the application and space available (see page 77 for full list of components included in each set).

• Rotary evaporator with diagonal glass condenser for standard distillations. • Rotary evaporator with vertical glass condenser for distillation of solvents with higher boiling points. 20% narrower than RE300 saving space. • Rotary evaporator with cold finger glass condenser for use with ice or dry ice for volatile or low boiling solvents. No cooling water required. Unique drain to empty the large 1 litre trap very easily.

For each condenser pattern, there is also a plastic coating option for extra safety when using the glassware under vacuum. It acts as a safety screen, contains the glassware pieces and gives the operator sufficient time to transfer any potentially dangerous chemicals to a suitable vessel without spillage. RE300 & RE300DB

See page 114 for guide to solvent evaporation temperatures.

Page 76 Stuart Science Equipment Catalogue Rotary Evaporators

Glass set 00

Diagonal coil condenser, vapour tube for diagonal condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Glass set 01

Vertical coil condenser, vapour tube for vertical condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Glass set 02

Cold finger condenser, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Glass set 00P

Diagonal coil condenser plastic coated, vapour tube for diagonal condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Glass set 01P

Vertical coil condenser plastic coated, vapour tube for vertical RE301 & RE300DB condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Glass set 02P

Cold finger condenser plastic coated, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.

Technical Specification

Speed range 20 to 190rpm Vacuum < 1 mmHg Lift distance 150mm Dimensions, mm (w x d x h) 385 x 335 x 470-610 (excluding glassware) Electrical supply 220V-240V, 50/60Hz, 50W IP Rating 30

Ordering Information

Model Description

RE300 Rotary evaporator complete with glass set 00 RE301 Rotary evaporator complete with glass set 01 RE302 Rotary evaporator complete with glass set 02 RE300P Rotary evaporator complete with glass set 00P RE302 & RE300DB RE301P Rotary evaporator complete with glass set 01P RE302P Rotary evaporator complete with glass set 02P

Stuart Science Equipment Catalogue Page 77 Rotary Evaporators

Glassware accessories and spares

Anti splash protector • Adapter to protect against liquid ingress into the condenser in the event of "bumping". Also useful with liquids which have a tendency to foam. 29/32 cone and socket.

Ordering Information

Model Description RE200/SA Anti-splash protector RE200/SA

Extension adapter for small flasks • In order for small capacity evaporating flasks to reach the liquid level in the water bath this extension adapter should be fitted between the vapour tube and the flask. 29/32 cone and socket. For use with flasks of 50ml or 100ml capacity

Ordering Information

Model Description RE100/EA Extension adapter RE100/EA

Evaporating (Florentine) flasks • Florentine type flasks for use with all glassware sets. 29/32 socket.

Ordering Information

Model Description FD50/4RE/1 Evaporating flask 50ml FD100/4RE/1 Evaporating flask 100ml FD250/4RE/1 Evaporating flask 250ml FD500/4RE/1 Evaporating flask 500ml FD500/4REP Evaporating flask 500ml plastic coated FD1L/4RE/1 Evaporating flask 1000ml FD1L/4REP Evaporating flask 1000ml plastic coated FD2L/4RE/1 Evaporating flask 2000ml FD2L/4REP Evaporating flask 2000ml plastic coated

Receiving flasks • Receiving flasks for use with all glassware sets FD:/ • S35 spherical socket.

Ordering Information

Model Description RE100/RF/50 Receiving flask 50ml RE100/RF/100 Receiving flask 100ml RE100/RF/250 Receiving flask 250ml RE100/RF/500 Receiving flask 500ml RE100/RF/500P Receiving flask 500ml plastic coated RE100/RF/1L Receiving flask 1000ml RE100/RF/1LP Receiving flask 1000ml plastic coated RE100/RF:

Page 78 Stuart Science Equipment Catalogue Rotary Evaporators

Replacement parts for glassware sets

3, 4 Ordering Information 5, 6 Part Model Description 1 RE100/CO Diagonal condenser, glass set 00 8 7 2 RE100/COP Diagonal condenser, plastic coated, glass set 00P 3 RE200/VC Vertical condenser, glass set 01 4 RE200/VCP Vertical condenser, plastic coated, glass set 01P 5 RE200/CF Cold finger condenser, glass set 02 6 RE200/CFP Cold finger condenser, plastic coated, 12 glass set 02P 1, 2 7 RE200/CFD Drain for cold finger condenser, 9, 10 glass sets 02 and 02P 8 RE100/VR Feed tube/ vacuum release, all glass sets 13 14 9 RE100/VT Vapour tube diagonal condensers, glass sets 00 and 00P 10 RE100/VT/CF Vapour tube for vertical coil and cold finger condensers, glass sets 01, 01P, 02, 02P 11 RE100/VS Vacuum seal, all glass sets 12 4510/04/1 PTFE screwthread connectors, all glass sets, pack of 10 11 13 JC35/1 Spherical joint clip for receiving flask, all glass sets 14 KCM29 Metal joint clip for evaporating flask, all glass sets Digital baths, RE300DB and RE300OB

• Digital temperature display • Corrosion resistant stainless steel bowl • Cool touch outer case

These attractive water baths are specifically designed to be used with the Stuart® rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. The RE300DB is suitable for lower temperature applications whereby the RE300OB can be used with oil for higher temperature evaporations. Outer case’s are made from chemically resistant polypropylene.

Technical Specification RE300DB RE300OB Temperature range Ambient to 95°C Ambient to 180°C (Oil) Display resolution 1°C 1°C Temperature control ±1.5°C ±1.5°C (Water) ±3°C (Oil) Capacity 3 litres 6.2 litres Heater power 1000W 1400W Dimensions, mm (w x d x h) 260 x 260 x 240 284 x 300 x 258 Electrical supply 230V, 50-60Hz 230V, 50-60Hz IP Rating 32 32

Ordering Information RE300DB Model Description RE300DB Digital water bath RE300OB Digital high temperature oil bath

Stuart Science Equipment Catalogue Page 79 Rotary Evaporators Vacuum pump, RE3022C

• Quiet operation, no vibration • Long life PTFE heads and diaphragm • Vacuum regulator for easy adjustment • Integral catch pots. No maintenance dry system

The RE3022C is a powerful, compact vacuum pump. Constructed with solid PTFE heads, PTFE diaphragms and Kalrez® valves, the pump is designed to withstand the challenging role of a chemical laboratory pump. The pump is useful for any applications requiring vacuum generation and is ideal for use with the Stuart® rotary evaporator. By reducing the pressure within the glassware of the rotary evaporator solvents can be evaporated off at lower temperatures ensuring the bath can be kept at a safer temperature. The RE3022C includes vacuum regulator and catch pots to protect the pump from liquid RE3022C ingress, as standard.

Technical Specification RE3022C Ultimate pressure 12mbar Flow rate 21 litres/minute Net weight, kg 9.6 Dimensions, mm (w x d x h) 172 x 352 x 223 Electrical supply 230V, 50Hz, 150W

Ordering Information Model Description RE3022C Vacuum pump Recirculating cooler, SRC3

• Digitally set temperature • Easy to read LED display • Quiet operation • Powerful 450W cooling capacity • Safety cut out feature

The recirculating cooler offers powerful cooling for an external device. By accurately controlling the temperature of your cooling medium down to -20ºC, efficiency of operations such as condensing can be greatly improved. A recirculating cooler is not only much more powerful than conventional water cooling, but is also an ideal alternative when water consumption is an issue for economical, environmental or practical reasons.

Technical Specification

SRC3 Cooling capacity 450W at 10ºC Temperature range -20 to +20ºC Control accuracy ±2ºC Bath capacity 3 litres Pump rate 10 litres / minute Net weight, kg 25 Dimensions, mm (w x d x h) 206 x 401 x 540 Electrical supply 230V, 50Hz

Ordering Information SRC3

Model Description SRC3 Recirculating cooler, 3 litre capacity

Page 80 Stuart Science Equipment Catalogue Rockers and Shakers

Stuart® offers a comprehensive range of shakers and rockers, units are available with four actions, orbital, linear, 3D gyratory and see-saw. Almost all actions are also available in personal sized units or larger laboratory scale models.

Page 82 - Introduction Page 83 - Rockers Page 87 - Shakers

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 81 Introduction Rockers Rockers work in a similar way to platform shakers (see below) but are much less aggressive on the sample. Rockers utilise either a see saw action, where the platform rocks on a central point, or a softer 3D gyratory action where the platform moves in a three dimensional motion about the central point. A see saw action provides a wave motion in the sample, ideal for washing. A 3D gyratory action very gently swirls the sample making it ideal for delicate cell culturing, staining and de-staining procedures etc. In some cases a tier system is available where magnetic platforms can be stacked to increase capacity, without increasing the footprint.

SSL4

Shakers Shakers are ideal for almost any vessel from microcentrifuge tubes through petri dishes and microtitre plates to conical flasks. Shakers are available with either an orbital action where the platform moves in a circular orbit or a reciprocating linear movement where the platform moves back and forth horizontally. An orbital action provides a swirling action on the sample, ideal for aeration. A linear shaker is more aggressive making it ideal for applications such as extractions.

A flask shaker applies the movement directly to the sample vessel, rather than via a platform. The sample vessel, typically a flask or bottle, is clamped around the neck and shaken in a pivotal motion. This mimics the type of aggressive shaking action that would be generated when a flask is shaken by hand. For example you could use this piece of equipment during a solvent extraction. SSM5 with SSM5/1 and SSM5/3

Page 82 Stuart Science Equipment Catalogue RockersRockers &Shakers Rockers

Rockers utilise either a see saw action, where the platform rocks on a central point, or a gentler 3D gyratory action where the platform moves in a three dimensional motion about the central point. A see saw action provides a wave motion in the sample, ideal for washing. A 3D gyratory action very gently swirls the sample making it ideal for delicate cell culturing, staining and de-staining procedures etc. In some cases a tier system is available where magnetic platforms can be stacked to increase capacity, without increasing the footprint.

Page 84 - Mini rockers Page 85 - Laboratory scale rockers

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 83 Rockers Rockers, mini, SSM3 & SSM4

• Small space saving design - ideal for personal use • Gentle rocking action • Choice of two models: - 3D gyratory action SSM3 - See-saw wave action SSM4 • Digital speed control and built-in timer • Optional tier system available to increase capacity

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models:

Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to any position by hand to optimise mixing of vessels.

Model SSM4 has a see-saw rocking action that creates a wave motion within vessels such as culture flasks, petri dishes etc.

Digital selection of both speed and time facilitates accurate and reproducible conditions. Both parameters are controlled via an easy to use encoder control knob and displayed on the bright LED display. SSM3 & SSM3/1 Both models are supplied with a non-slip mat which holds flat based vessels securely in place during mixing. An accessory tier system can be fitted in seconds, without the need for tools, tripling the available space for samples. Each tier is securely held in place by magnets.

Technical Specification

SSM3 SSM4

Rocking action 3D gyratory See-saw wave Platform dimensions, mm (w x l) 235 x 235 235 x 235 Speed range 5 to 70rpm 5 to 70rpm Angle of tilt 3 to 12° 7° Angle adjustable Yes by hand No Maximum load, kg 33 Dimensions, mm (w x d x h) 240 x 300 x 165 240 x 300 x 150 Tier height, mm 125/tier 125/tier Operational temp. range +4 to +40°C +4 to +40°C Maximum permissible humidity 80% 80% Net weight, kg 55 SSM4 Electrical supply 230V, 50Hz, 50W 230V, 50Hz, 50W IP Rating 30 30

Ordering Information

Model Description SSM3 Rocker, gyratory, mini SSM4 Rocker, see-saw, mini SSM3/1 Tier system (2 platforms plus 8 bar)

Page 84 Stuart Science Equipment Catalogue Rockers

(fits both models) Rockers, lab scale, SSL3 and SSL4

• Large platform rockers – ideal for multiple users • Gentle rocking action • Choice of two models: - 3D gyratory action SSL3 - See-saw wave action SSL4 • Digital speed control and built-in timer • Optional tier system available to increase capacity

These rockers have large platforms able to accommodate a number of samples, ideal for a busy lab. They are very quiet in operation and SSL3 designed to be on continuously. Two models available:

Model SSL3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to any position by hand to optimise mixing of vessels.

Model SSL4 has a see-saw rocking action that creates a wave motion within vessels such as culture flasks, petri dishes etc.

Rockers are often used in conjunction with incubators and environmental chambers. Both units can be used in temperatures up to 40°C and humidity up to 80%. Both models are supplied with a non-slip mat and have digital selection of both speed and time making them very easy to operate. An accessory tier system can be fitted in seconds, without the need for tools, tripling the available space for samples. Each tier is securely held in place by magnets.

Technical Specification

SSL3 SSL4

Rocking action 3D gyratory See-saw wave Platform dimensions, mm (w x l) 355 x 355 355 x 355 Speed range 5 to 70rpm 5 to 70rpm Angle of tilt 3 to 12° 7° Angle adjustable Yes by hand No Maximum load, kg 10 10 Dimensions, mm (w x d x h) 360 x 420 x 170 360 x 420 x 160 Tier height, mm 125/tier 125/tier Operational temp. range +4 to +40°C +4 to +40°C SSL4 Maximum permissible humidity 80% 80% Net weight, kg 10 10 Electrical supply 230V, 50Hz, 50W 230V, 50Hz, 50W IP Rating 30 30

Ordering Information

Model Description

SSL3 Rocker, gyratory, lab scale SSL4 Rocker, see-saw, lab scale SSL3/1 Tier system (2 platforms plus 8 bars) (fits both models)

Stuart Science Equipment Catalogue Page 85 Blue chip investments

In the world of benchtop science equipment with its’ entire range To find out more about our extensive equipment, the Stuart® name means top protected by BioCote®, a unique, and growing range of high quality, quality, no compromise. Lately we have invisible, silver-based anti-microbial value for money benchtop equipment, applied our knack for constant solution added to Stuart® equipment to from rockers and rollers, to mixers, improvement and innovation to design prevent the growth of fungi and rotators, shakers and stirrers, visit our some new very practical and affordable bacteria - at no extra cost. All of our new website: solutions to the widest range of stylishly designed, feature-packed www.stuart-equipment.com laboratory applications. Stuart® is the equipment comes with a three-year only brand of benchtop laboratory warranty as standard.

Can you afford not to? t: +44 (0)1785 812121 e: [email protected] w: www.stuart-equipment.com Rockers &Shakers Shakers

Shakers are ideal for almost any vessel from microcentrifuge tubes through petri dishes and microtitre plates to conical flasks. Shakers are available with either an orbital action where the platform moves in a circular orbit or a reciprocating linear movement where the platform moves back and forth horizontally. An orbital action provides a swirling action on the sample, ideal for aeration. A linear shaker is more aggressive making it ideal for applications such as extractions. A flask shaker applies the movement directly to the sample vessel, rather than via a platform. The sample vessel, typically a flask or bottle, is clamped around the neck and shaken in a pivotal motion. This mimics the type of aggressive shaking action that would be generated when a flask is shaken by hand.

Page 88 - Microtitre shakers Page 89 - Orbital mini shaker Page 90 - Orbital laboratory scale shaker Page 91 - Reciprocating laboratory scale shaker Page 92 - Flask shaker

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 87 Shakers Shaker, microtitre, SS:5 Range

• High speed, small orbiting action – ideal for microtitre plates • Capacity for four or eight microtitre plates • Digital selection of speed • In built digital timer • Accessories available for mixing microcentrifuge tubes

With the combination of high speed and a tiny orbit the SS:5 range has an ideal action for mixing microtitre plates and microcentrifuge tubes. Microtitre plates are held to the platform by a highly efficient non slip mat. Microtubes can be held via the purpose built accessory racks, available separately.

The SS:5 range has adjustable speed control between 250 and 1250rpm, the speed is shown via the bright LED display and accurately controlled by an encoder. The versatile timer can be set from 1 second SSM5 to 9 hours. The unit can also be set for continuous operation.

Technical Specification

SSM5 SSL5

Platform dimensions, mm (w x l) 220 x 220 306 x 306 Number of plate positions 48 Speed range, rpm 250 to 1250 250 to 1250 Orbit diameter, mm 1.5 1.5 Maximum load, kg 12 Operational temperature range +4 to +40°C +4 to +40°C Maximum permissible humidity 80% 80% Dimensions, mm (w x d x h) 240 x 300 x 160 360 x 420 x 160 Net weight, kg 5 10 Electrical supply 230V, 50Hz, 50W 230V, 50Hz, 50W IP Rating 31 31

SSL5 Ordering Information

Model Description

SSM5 Shaker, microtitre, mini SSL5 Shaker, microtitre, labscale SSM5/1 Tube holder for 1.5ml tubes SSM5/2 Tube holder for 0.5ml tubes SSM5/3 Tube holder for 0.2ml tubes

Page 88 Stuart Science Equipment Catalogue Shakers Shaker, orbital, mini SSM1

• Smooth orbital shaking action • Orbit of 16mm is ideal for larger samples, e.g. multi-well plates • Built-in digital timer • Variable speed control to 300rpm • Supplied with non-slip mat for multi-well plates etc. • Optional accessory cradle system for flasks and bottles

The compact SSM1 provides a smooth uniform circular motion with an orbit of 16mm. It is supplied with a non-slip mat that can hold up to four multi-well plates or diagnostic cards. The shaking action is SSM1 ideal for samples of 0.5 to 5ml held in multi well plates, dishes and petri dishes. The shaker can be used in incubators and environmental chambers (up to 40°C and 80% humidity). Alternatively, an accessory cradle system is available that can accommodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars. It turns the SSM1 into a very effective mini platform shaker. It will hold up to: 4 x 250ml or 2 x 500ml or 1 x 1000ml Erlenmeyer flasks or bottles. These larger vessels are held between the rubber bars. The flexible cradle system allows for different combinations of vessels offering maximum versatility.

Speed is variable from 30 to 300 rpm. Once set on the digital display, the shaking speed is effectively maintained even over long periods of time. Shaking times can be set to run from 1 second to 9 hours on the versatile timer, or the unit can be set for continuous operation.

Technical Specification

SSM1

Platform dimensions, mm, (w x l) 220 x 220 Speed range 30 to 300rpm Orbit diameter, mm 16 Maximum load, kg 3 Operational temperature range +4 to +40°C Maximum permissible humidity 80% Dimensions, mm (w x d x h) 240 x 300 x 140 Net weight, kg 5 Electrical supply 230V, 50Hz, 50W IP Rating 31 SSM1 with SSM1/1

Ordering Information

Model Description

SSM1 Shaker, orbital, mini SSM1/1 Accessory cradle with 4 securing bars SSM1/2 Large platform (holds up 8 plates) 340 x 300mm SSM1/3 Clear Acrylic® lid

Stuart Science Equipment Catalogue Page 89 Shakers Shaker, orbital, lab scale, SSL1

• Orbital shaking action – ideal for aeration applications • Digital speed selection to 300rpm with soft start • Built-in digital timer • Reliable quiet drive mechanism • Fully adjustable cradle system

This lab scale platform shaker has a powerful yet quiet shaking mechanism that has been designed for problem free continuous use. Model SSL1 provides a smooth orbital shaking action with an orbit of 16mm and speed range of 30 to 300rpm, ideal for most culturing / aeration applications. It can be used in environmental chambers and

CO2 incubators.

The cradle type platform has four rubber cushioned horizontal SSL1 securing bars with quick release handles. They can be easily adjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers. For example, they will accommodate the following Erlenmeyer flasks or bottles: 12 x 250ml or 9 x 500ml or 6 x 1000ml or 2 x 2000ml.

The main advantage of this cradle system is that it can accommodate different sizes of vessel, a common requirement where shakers are used by different people in the laboratory.

Speed is fully variable and is set digitally for consistency. The speed is microprocessor controlled and accurately maintained even over long runs. A versatile built in timer can be set from 1 second to 9 hours. After the timer has counted down, the shaker stops and sounds an alert. Alternatively the unit can be set for continuous operation.

A larger platform is available as an optional accessory (catalogue number SSL1/1). Designed to increase the capacity of the SSL1, the platform is 510 x 510mm with six securing bars. It will accommodate the following Erlenmeyer flasks or bottles: 30 x 250ml or 16 x 500ml or 9 x 1000ml or 4 x 2000ml. When this platform is fitted, the maximum permissible speed is 150rpm. An optional flat platform the SSL1/2 is available if you would prefer not to use the cradle system.

SSL1/1

Page 90 Stuart Science Equipment Catalogue Shakers

Technical Specification

SSL1 Shaking action Orbital Platform dimensions, mm (w x l) 335 x 335 Speed range 30 to 300rpm Orbit / amplitude, mm 16 Maximum load, kg 10 Dimensions, mm (w x d x h) 360 x 420 x 270 Operational temperature range +4 to +40°C Maximum permissible humidity 80% Net weight, kg 11 Electrical supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

Model Description SSL1 Shaker, orbital, lab scale SSL1/1 Accessory platform 510 x 510mm with six rubber securing bars. SSL1/2 Flat platform, no cradle 350 x 350mm

Shaker, reciprocating, lab scale, SSL2 Model SSL2 has construction and control identical to SSL1 on previous pages, but with reciprocating shaking action with an amplitude of 20mm and speed range of 25 to 250 strokes / minute. It produces a rigorous side-to-side mixing action ideal for extractions etc.

Technical Specification

SSL2 Shaking action Reciprocating Platform dimensions, mm, (w x l) 335 x 335 Speed range 25 to 250rpm Orbit / amplitude, mm 20 Maximum load, kg 10 Operational temperature range +4 to +40°C Maximum permissible humidity 80% Dimensions, mm (w x d x h) 360 x 420 x 270 Net weight, kg 11 Electrical supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

SSL2 Model Description SSL2 Shaker, reciprocating, lab scale

Stuart Science Equipment Catalogue Page 91 Shakers Shaker, flask, SF1

• Vigorous shaking action • Timed operation or continuous running • Robust construction • Ideal for extractions

Valuable time can be taken up mixing bottles and flasks by hand. Let the SF1 take the strain. Holding up to eight flasks or bottles, up to 500ml capacity, it creates a vigorous mixing action by simulating hand shaking - especially useful for applications where prolonged shaking is required as it can be left on continuously and won't get tired! Robust construction, mounted on four rubber feet to absorb vibration and prevent unnecessary movement on the bench. Analogue timer covers 10 to 60 minutes with a manual override. Electronic feed-back control ensures a constant speed irrespective of SF1 load. Supplied with two side arms, eight clamps and Allen key. An optional extension kit is available, catalogue number SF1/2 which consists of two extension arms and four extra clamps. It increases the capacity to twelve bottles or flasks.

Technical Specification

SF1 Speed range 8 to 800 oscillations/min Amplitude, mm 1.5 Dimensions, mm (w x d x h) 780 x 270 x 240 Maximum load, kg 3 Net weight, kg 8.3 Electrical supply 230V, 50Hz, 50W IP Rating 31

Ordering Information

Model Description SF1 Flask shaker with two side-arms, eight clamps and Allen key SF1/1 Spare clamp SF1/2 2 x accessory side - arms and 4 x clamps. Allows shaker to hold up to 12 vessels

Page 92 Stuart Science Equipment Catalogue Water Baths Water Baths are one of the most common pieces of laboratory equipment used today, the Stuart® range offers three sizes 6, 15 and 24L with analogue or digital control. There is also a shaking water bath available the SBS40.

Page 94 - Analogue Water Baths Page 95 - Digital Water Baths Page 96 - Shaking Water Bath

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 93 Water Baths Water baths, analogue, SWB:1

• Corrosion resistant tank • Easy to use analogue controls • Choice of three sizes: 6L, 15L and 24L • Economical price

Three robust and reliable water baths each with an easy to clean stainless steel tank and sturdy metal outer case. The heating element is located inside the tank to facilitate rapid warm-up and responsive heating. A perforated stainless steel platform (removable for cleaning) covers the element and acts as a support for vessels. Temperature is easily controlled via the temperature scaled analogue control on the front.

Stainless steel bath covers are available as an optional accessory, to help reduce heat losses and evaporation. The covers are gable SWB1 shaped, designed so that any condensation runs to the interior walls of the bath.

Technical Specification

SWB1 SWB2 SWB3

Nominal capacity 6L 15L 24L Temperature range Ambient Ambient Ambient +5ºC to 100ºC +5ºC to 100ºC +5ºC to 100ºC Temperature stability ±0.5ºC ±0.5ºC ±0.5ºC Adjustable cut-out No No No Dimensions, mm (w) 335 (300) 335 (300) 335 (300) External, mm (d) 190 (150) 370 (325) 540 (500) (Internal), mm (h) 270 (200) 270 (200) 270 (200) Working height, mm 160 160 160 Net weight, kg 6.1 8.7 12.3 Heater power 750W 1000W 1500W Electrical supply 230V, 50Hz 230V,50Hz 230V, 50Hz IP Rating 31 31 31

Ordering Information

Model Description

SWB1 Water bath, analogue, 6L SWB2 Water bath, analogue, 15L SWB3 Water bath, analogue, 24L SWB1/1 Accessory cover for 6L bath SWB2/1 Accessory cover for 15L bath SWB1 with cover SWB3/1 Accessory cover for 24L bath

Page 94 Stuart Science Equipment Catalogue Water Baths Water baths, digital, SWB:D

• Digital set and display of bath temperature • Adjustable safety thermostat • Corrosion resistant tank • Choice of three sizes: 6L, 15L and 24L

Similar robust construction to the analogue baths described previously but with an easy to use digital control to both set and display temperature.

Electronic control ensures good temperature stability. Selection of bath temperature is easy and accurate via the digital LCD display which also gives a read-out of actual temperature. Electronic control ensures good temperature stability. In addition, there is an adjustable over-temperature cut-out to protect the bath and samples from control failure. SWB1D Accessory bath covers are also available to help reduce heat losses and evaporation. The gable shaped covers are manufactured from stainless steel and have an insulated handle.

Technical Specification

SWB1D SWB2D SWB3D

Nominal capacity 6L 15L 24L Temperature range Ambient +5ºC Ambient +5ºC Ambient+5ºC to 100ºC to 100ºC to 100ºC Temperature stability ±0.5ºC ±0.5ºC ±0.5ºC Adjustable cut-out Yes Yes Yes Dimensions, mm (w) 335 (300) 335 (300) 335 (300) External, mm (d) 190 (150) 370 (325) 540 (500) (Internal), mm (h) 270 (200) 270 (200) 270 (200) Working height, mm 160 160 160 Net weight, kg 6.1 8.7 12.3 Heater power 750W 1000W 1500W Electrical supply 230V, 50Hz 230V, 50Hz 230V, 50Hz

Ordering Information

Model Description

SWB1D Water bath, digital, 6L SWB1D SWB2D Water bath, digital, 15L SWB3D Water bath, digital, 24L SWB1/1 Accessory cover for 6L bath SWB2/1 Accessory cover for 15L bath SWB3/1 Accessory cover for 24L bath

Stuart Science Equipment Catalogue Page 95 Water Baths Water bath, shaking, SBS40

• Choice of linear or orbital shaking action • Digital display and selection of temperature • Low level water sensor • Integral drain • Range of accessories

A water bath with integral shaking, a choice of platform is available to provide linear or orbital shaking action. The platforms require no special fitting and use strong magnets, which couple to the drive unit underneath the stainless steel tank. Vessels are securely held in place on the stainless steel platform by a series of high-tension springs, which will accommodate almost any size and combination of vessel. The heater is mounted underneath the tank to allow easy cleaning. A low-level water sensor causes a warning to flash on the display to indicate when the water level is low, cutting power to the heater to prevent the bath from boiling dry. A drain is also incorporated to aid emptying of the bath. A perforated platform is available for when you might need a standard water bath without the shaking action. The platforms will accommodate the following Erlenmeyer flasks: 8 x 250ml, or 6 x 500, or 4 x 1000ml capacity. The speed and temperature controls are easy to use. The shaking SBS40 speed is adjustable and electronic feedback control ensures accurately maintained speed. The water bath temperature is set and monitored via the easy to read LED display. In addition, the design incorporates an over temperature protection system that tracks the set temperature and controls the heater in the event of a fault.

Technical Specification

SBS40 Capacity 24L Temperature range Ambient +5°C to 99.9°C Temperature stability ±0.25°C Shaking speed 20 to 200rpm Shaking orbit/amplitude, mm 20 Internal dimensions, mm (w x d x h) 300 x 500 x 200 Overall dimensions, mm (w x d x h) 335 x 580 x 330 Platforms Net weight, kg, 17 Electrical supply 230V, 50Hz 1400W IP Rating 31

Ordering Information

Model Description SBS40 Water bath, shaking (without platform) SBS40/1 Platform, linear shaking action SBS40/2 Platform, orbital shaking action SBS40/3 Platform, perforated

Accessories

Model Description SBS40/4 Polycarbonate cover, hinged SWB3/1 Stainless steel cover SBS40/5 , 143 x 1.5ml micro tubes SBS40/6 Test tube rack, 120 x 13mm culture tubes SBS40/7 Test tube rack, 72 x 16mm culture tubes SBS40/8 Test tube rack, 56 x 15ml centrifuge tubes Accessories SBS40/9 Test tube rack, 30 x 26mm culture tubes SBS40/10 Test tube rack, 25 x 50ml centrifuge tubes

Page 96 Stuart Science Equipment Catalogue Water Purification

In the large range of Stuart® distillation apparatus there is something for every user. The Merit is a simple apparatus ideal for schools, whilst the Distinction offers some level of automation. The Aquatron® models offer complete automatic control and the option of double distilled output.

Page 98 - Introduction Page 100 - Aquatron® Water stills Page 102 - Aquatron® Filter Page 103 - Aquatron® Deioniser Page 104 - Distinction water still Page 105 - Merit water still Page 106 - Water still accessories

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 97 Water Purification Distillation

Distillation is a natural process that has been used to purify liquids for many hundreds of years. Today it remains the most commonly used technique for water purification in laboratories. From schools to research institutes the simplicity, reliability and versatility of distillation make it the first choice for producing pure water for general use. It has the widest capability of any method of water treatment and is ideal for the removal of:

• Dissolved inorganic salts • Bacteria • Pyrogens • Particulate matter • Colloids • Organic material boiling at >100°C

The performance of a Water Still is less dependant on the quality and temperature of the feed water than most other methods of water treatment. It is a visible process, easy to monitor and has no hidden resins or membranes to degrade and affect water quality.

Principles of distillation

There is a major difference between distillation and all other techniques of water purification in that the contaminants are not removed from the water but that the water is removed from its contaminants. The feed water is boiled producing pure steam with contaminants being left behind in the boiling chamber. Steam is then condensed back into pure water. It is this double phase change which gives distillation its versatility and reliability. The only contaminants which can carry through the phase change are organic materials with a boiling point below 100°C and dissolved gases.

How a Stuart® Water Still works

There are 4 basic components to any Stuart® Water Still:

• Boiler • Condenser • Constant level device • Heater

Water is heated in the boiler to produce pure steam. This is fed into the condenser via a long vertical tube with baffles in order to prevent carry over of raw water droplets. Water is fed through the condenser, cooling the steam to produce distilled water and itself being warmed in the process. This warmed water is then fed to the boiler via the constant level device which maintains the water in the boiler at the correct level and increases efficiency. The vertical design of condenser is common to all Stuart® Water Stills and ensures the maximum energy transfer between cooling water and condensate. These highly efficient condensers produce cold distilled water ready for immediate use.

Page 98 Stuart Science Equipment Catalogue Water Purification

Stuart® Water Stills

There are 3 levels of specification to choose from in the Stuart® Water Still range:

Aquatron®

Fully automatic, borosilicate glass stills with silica sheathed heaters. Available with outputs of 4 or 8 litres/hr single distilled or a double unit producing 4 litres/hr of double distilled water. Capable of being converted to pre-treated feed to remove the need for de-scaling. See page 102.

Distinction

Economical borosilicate glass still with silica sheathed heater. Produces 4 litres/hr single distilled water. A safety device is included which turns off the heater and prevents overflow when the collecting reservoir is full. See page 104. Aquatron®

Merit

A simple glass Water Still with long life metal heater and twin safety thermostats. Ideal for schools and colleges. See page 105.

Accessories

A range of accessories is available to compliment the range of Water Stills including deioniser, filter and storage aspirators.

Aquatron® filter

Spun polypropylene cartridge filter important as pre-treatment for Aquatron® Water Stills when used with water supplies with high levels of particulate matter. Also ideal for protecting other expensive equipment such as dishwashers. See page 102.

Distinction Aquatron® deioniser

Simple deioniser with colour change cartridges showing resin condition at a glance without the need for batteries or mains electricity. Use as a stand alone deioniser or as pre-treatment for Aquatron® Water Stills. See page 103.

Reservoir options

A choice of aspirator bottles manufactured from Pyrex® borosilicate glass or polypropylene. Ideal for storing distilled water. See page 106.

Merit

Stuart Science Equipment Catalogue Page 99 Water Purification Water stills, Aquatron®, A4000, A8000 & A4000D

• Fully automatic operation • High purity pyrogen free output • Low temperature distillate • Operates from any raw water supply • Reservoir level control • Simple conversion to pre-treated feed • Supplied with wall mounting bracket • Safety features allow unattended operation • Simple to clean

Three models are available giving outputs of 4 or 8 litres/hour single or 4 litres/hour double distilled water.

The high quality borosilicate glassware coupled with silica sheathed heaters gives pyrogen free distillate of the highest purity from A4000 virtually any raw water supply.

The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. This produces cold distilled water ready for immediate use and pre-heats the boiler feed to increase efficiency.

All glass construction allows rapid descaling using strong mineral acids. A built in "clean" function and integral acid addition make the cleaning operation simple and safe with no need to dismantle any of the glassware. A large bore stopcock with PTFE key is fitted for easy draining of chemicals after cleaning. A flow sensing device will detect any reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low pressure supplies down to 3psi (20kPa). As a fail-safe device there is an over-temperature thermostat mounted in the boiling chamber.

The Aquatron is very easy and safe to assemble and maintain. Both the acrylic safety screen and the cabinet lid are removable giving unrivalled access to the glassware components. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage.

Every Aquatron® water still is supplied with a reservoir level control. The control is a simple and effective system which can be fitted to virtually any type of reservoir vessel. It will turn the still off when the reservoir is full and restart it when the level in the reservoir drops as distilled water is removed for use making it fully automatic.

Page 100 Stuart Science Equipment Catalogue Water Purification

Aquatron® models

A4000

Produces 4 litres/hour single distilled water. Can operate standing on the laboratory bench or be wall mounted. Supplied with easy to fit wall mounting bracket.

A8000

Produces 8 litres/hour single distilled water, ideal for the larger laboratory. Glassware is enclosed in the same cabinet as the A4000 so can operate standing on the laboratory bench or be wall mounted. Supplied with easy to fit wall mounting bracket.

A4000D

Produces 4 litres/hour double distilled water for higher purity levels. The first stage distillation is carried out in a glassware set mounted at the front of the cabinet allowing easy access for descaling. The distilled water is fed to a second set of glassware mounted at the rear and distilled a second time. The rear glassware is fitted with a level sensor to ensure the heater is only activated when there is sufficient water in the boiler.

Conductivity and resistivity are affected by the presence of dissolved carbon dioxide. All figures given in this catalogue are based on tests carried out on the still output at 20°C and free from carbon dioxide.

Technical specification

A4000 A8000 A4000D Output, l/hr 4, single 8, single 4, double pH 5.0 – 6.5 5.0 – 6.5 5.0 – 6.5 Conductivity, µScm-1 1.0 – 2.0 1.0 – 2.0 1.0 – 1.5 Resistivity, mOhm-cm 0.5 – 1.0 0.5 – 1.0 0.7 – 1.0 Temperature, °C 25 - 35 25 - 35 25 - 35 Pyrogen content* Pyrogen free Pyrogen free Pyrogen free Water supply 1 l/min 3-100psi 2 l/min 3-100psi 2 l/min 3-100psi (20-700kPa) (20-700kPa) (20-700kPa) Electrical supply 220 or 240V, 50-60Hz, 220 or 240V, 50-60Hz, 220 or 240V, 50-60Hz, single phase single phase single phase Max. power, kW 366 Dimensions, mm (w x d x h), 550 x 240 x 410 550 x 240 x 410 550 x 410 x 410 IP Rating 21 21 21

* care is required to produce pyrogen free water and the output should be tested before use.

The pH of distilled water

Pure water, whether from a still, deioniser or reverse osmosis system, is an excellent solvent and will quickly dissolve carbon dioxide from the air to form a very dilute solution of carbonic acid. In a water still this solution can form as the steam liquifies in the condenser, resulting in a distillate output with a pH of 5 - 6.5. This is a normal level which has little effect on most laboratory procedures. A slightly acidic pH value does not mean that the water is grossly contaminated as a carbon dioxide level of less than one part per million will cause a pH of 5. If necessary the carbon dioxide may be removed by boiling the water. It is then vital to protect the water from the air otherwise the carbon dioxide will be re-absorbed quickly.

Ordering information

Model Description A4000 Aquatron water still, 4 l/hr, single distilled, 240V A4000/220 Aquatron water still, 4 l/hr, single distilled, 220V A8000 Aquatron water still, 8 l/hr, single distilled, 240V A8000/220 Aquatron water still, 8 l/hr, single distilled, 220V A4000D Aquatron water still, 4 l/hr, double distilled, 240V A4000D/220 Aquatron water still, 4 l/hr, double distilled, 220V

Stuart Science Equipment Catalogue Page 101 Water Purification

Conversion to pre-treated feed

• Eliminates descaling • Improves distillate purity • Use with any pre-treated water source • No loss of treated water

A simple conversion kit is available so that the Aquatron® water still can be operated from a pre-treated feed. Suitable sources of pre- treatment are almost any model of deioniser or reverse osmosis unit or a piped supply of treated water. The pre-treated water is fed directly to the boiler and cooling water is supplied to the condenser separately. The controls ensure that pre- treated water is supplied to the boiler automatically as required, preventing overflow and costly waste. A safety device is incorporated to protect the still in the event of failure of the pre- ® treated supply. Aquatron connected in series with deioniser The conversion kit can be fitted easily in a few minutes to any and filter existing Aquatron® model should the need arise.

Ordering information

Model Description WCK/N Conversion kit for pre-treated feed (all models)

Filter, Aquatron®, AFH

• Quickly and effectively removes particulate matter from the water supply • Disposable, easily changed polypropylene filter elements • Flow rates up to 25 litres/min • Independent operation or links to deioniser unit

A simple but effective filter unit ideal for removing particulate matter from your water supply to protect sensitive equipment from damage. Supplied complete with flexible hose for connection to the tap and connection for 9mm I.D. hose on water outlet.

Technical specification

AFH Filter element material Polypropylene Pore size, µm 25 Maximum flow rate, l/min 25 Maximum water temperature, °C 40 Maximum water pressure, psi (kPa) 100 (700) Dimensions, mm 130 x 315

AFH Ordering information

Model Description AFH Filter housing AFI Filter elements (pack of 3) AFD Wall mounting bracket ALC Coupling to connect to Aquatron® deioniser unit ADH (see page 103)

Page 102 Stuart Science Equipment Catalogue Water Purification Deioniser, Aquatron®, ADH

• Output up to 60 litres/hour • Low cost disposable cartridges • Colour change indicates resin condition at a glance • Free standing or wall mountable • Ideal as pre-treatment for Aquatron® water stills

A simple, portable deioniser giving good quality water at an affordable price.

The disposable ion exchange cartridges slowly change colour from green to blue as they are exhausted giving at a glance indication of the resin condition. No need for conductivity meters, batteries or mains electrical power.

Supplied complete with flexible hose for connection to a tap and a stopcock to control the flow rate.

Can be linked in series with the Aquatron® filter (page 90) either by a flexible hose or the rigid coupling (ALC) available as an accessory. Ideal as a pre-treatment for Aquatron® water stills to prevent scale build up and improve output quality, see page 90 for details *. Housing and ion exchange cartridges must be ordered separately. ADH

Technical specification

ADH Maximum flow rate, l/hr 60 Maximum water temperature, °C 40 Maximum water pressure, psi (kPa) 100 (700) Output conductivity, µScm-1 <15 Dimensions, mm 130 x 315

Ordering information

Model Description ADH Deioniser housing ADI Ion exchange cartridges (pack of 3) AFD Wall mounting bracket ALC Coupling to connect to Aquatron® filter unit AFH (see page 102) Deioniser and filter connected via ALC and fitted with wall mounting brackets Output at various levels of water hardness (output conductivity less than 15µScm-1)

Total dissolved solids Output volume 100ppm 250 litres 300ppm 110 litres 500ppm 50 litres

* If linking an Aquatron® water still to the deioniser the still must be fitted with the conversion kit WCK/N. See page 102.

Stuart Science Equipment Catalogue Page 103 Water Purification Water still, Distinction, D4000

• All glass construction • Two independent safety thermostats • Safety reservoir full shut off • Wall mountable • Silica sheathed heaters

All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the heater when the collecting reservoir is full. Prevents overflow if the still is inadvertently left switched on when unattended. With two independent safety thermostats to prevent over heating in the event of an interruption to the water supply. The unique condenser design ensures that the droplets of distilled D4000 water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware. The stand is pre-drilled to facilitate wall mounting.

Technical specification

D4000 Output 4 litres/hr, single distilled pH 5.0 – 6.5 Conductivity, µScm-1 1.0 – 2.0 Resistivity, mOhm-cm 0.5 – 1.0 Temperature 25 - 35°C Pyrogen content* Pyrogen free Water supply 1 litre/min 3 – 100psi (20-700kPa) Electricity supply 220 or 240V, 50-60Hz, single phase Power requirement 3kW Dimensions, mm (w x d x h) 540 x 160 x 410 IP Rating 31

* care is required to produce pyrogen free water and the output should be tested before use.

Ordering information

Model Description D4000 Distinction water still, 240V D4000/EURO Distinction water still, 220V

Conductivity and resistivity are affected by the presence of dissolved carbon dioxide. All figures given in this catalogue are based on tests carried out on the still output at 20°C and free from carbon dioxide.

Page 104 Stuart Science Equipment Catalogue Water Purification Water still, Merit, W4000

• Economical price • Glass construction with long life metal heating element • Two independent safety thermostats • Wall mountable

The Merit is the ideal choice for budget conscious laboratories that can’t afford to compromise on quality. It combines economy and high performance with a host of other features which comparable stills cannot match.

Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware.

The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency.

Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. Safety features include two independent safety thermostats to prevent over heating in the event of failure of the water supply. W4000 The stand is pre-drilled to facilitate wall mounting.

Technical specification

W4000 Output 4 litres/hr, single distilled pH 5.0 – 6.5 Conductivity, µScm-1 3.0 – 4.0 Resistivity, mOhm-cm 0.25 – 0.3 Temperature 25 - 35°C Pyrogen content * Pyrogen free Water supply 1 litre/min 3 – 100psi (20-700kPa) Electricity supply 220 or 240V, 50-60Hz, single phase Power requirement 3kW Dimensions, mm (w x d x h) 500 x 150 x 450 IP Rating 31

* care is required to produce pyrogen free water and the output should be tested before use.

Ordering information

Model Description W4000 Merit water still, 240V W4000/EURO Merit water still, 220V

Conductivity and resistivity are affected by the presence of dissolved carbon dioxide. All figures given in this catalogue are based on tests carried out on the still output at 20°C and free from carbon dioxide.

Stuart Science Equipment Catalogue Page 105 Water Purification Water Still accessories

The following accessories are available for use with Aquatron®, Distinction and Merit water stills.

Ordering information

Model Description I/WR20 Pyrex® glass reservoir bottle supplied complete with PTFE stopcock. The bottle closure is fitted with connections for distillate inlet pipe, reservoir level control and a 0.2µm filter on the air inlet. Autoclavable at 121°C. Capacity 20 litres. I/BNP10A Aspirator bottle ideal for use as a water still I/WR20 reservoir. Manufactured from polypropylene and autoclaveable at 121°C. Cap with drill guides for distillate and air inlets. Capacity 10 litres. I/BNP20A As above but capacity 20 litres

I/BNP10A

Page 106 Stuart Science Equipment Catalogue Technical Information

Page 108 - BioCote® Page 110 - Service and Repair Page 111 - Certifications and conformity Page 112 - Key to symbols Page 113 - IP Ratings Page 114 - Solvent evaporation temperatures Page 115 - Standard melting points - Liquid selection Page 116 - SI Base Units - SI Derived units Page 117 - Physical constants Page 118 - Periodic table Page 120 - Index (by catalogue number) Page 122 - Index (alphabetical)

THE BENCHTOP EQUIPMENT HYGIENE SOLUTION

Stuart Science Equipment Catalogue Page 107 Technical Information

BioCote®

• Anti-microbial protection

• Trace levels of Silver encapsulated in the product

• Interrupts the cells ability to function

• Remains active for the life of the product (rapid accelerated tests suggest up to 25 years)

• Active against all common bacteria and fungi.

• Applied to all the following Stuart® equipment external components: Metalwork – in the paint Plastic Mouldings – in the colour Fascia – in the lacquer

FAQ’s about BioCote®

How does it work? During manufacture silver is added to every external component of the Stuart® product. The BioCote® additive is used in a wide range of finishes including powder coating and plastics, being incorporated during the manufacturing process.

The BioCote® finish inhibits the ability of the bacteria to reproduce. An illustration of the bacterial growth on a BioCote® treated surface Without the ability to reproduce the bacteria will naturally die, non-BioCote® protected surface compared to ® Non-BioCote® treated surface normally within 8 hours. This has the effect of reducing the levels of a BioCote protected surface. the bacteria by up to 99% during an 8 hour period. On a non 3600 BioCote® protected product the levels of bacteria could grow 3200 exponentially.

2800 Why BioCote®? 2400 BioCote® is a safe, effective, and lasts for the entire product lifecycle. It doesn’t wear off, nor does it leach. 2000

1600 How is it applied? BioCote® incorporates silver ions at the manufacture stage in both 1200

powder coating and plastics. Number of bacteria 900

700 How effective is BioCote®?

BioCote® is effective against a wide range of bacteria and fungi. 500 Examples of bacteria and fungi tested against include: 300 Aspergillus niger (Black Mould), Steptococcus faecalis, Salmonella enteritidis, Staphylococcus aureus (MRSA), Escherichia coli and 100 Listeria monocytogenes. 0 0 2 4 6 8 10 12 14 16 18 20 22 24 Hours Is it effective against MRSA and other antibiotic-resistant bacteria? Yes, BioCote® is currently effective against antibiotic-resistant bacteria, including MRSA.

Can it create resistant strains? There is no evidence to date as BioCote® does not function in the same way as antibiotics and therefore, to date, no bacteria have become resistant to BioCote® as they have to some antibiotics.

Page 108 Stuart Science Equipment Catalogue Technical Information

Has it been tested? Simulated life cycle testing has been carried out by independent 1 laboratories showing on going efficacy for over 25 years.

Why is BioCote® different to other anti-microbial products? BioCote® can provide a complete solution including it’s patent protected powder coating. It contains a silver based anti-microbial agent which is proven to be safe within standard working practices.

Does it rub off? No, the active agent in BioCote® is incorporated in the manufacturing process and is chemically bonded to the material. The ions remain constant at the surface and can not be rubbed off.

Is it safe? Yes, Silver is completely safe. 3 2 Can you see BioCote®? No, BioCote® protection is invisible to the naked eye. Even though you can’t see BioCote®, the Protected by BioCote® sticker on every Stuart® product will reassure you that your Stuart® product has long term microbial protection.

Is the addition of BioCote® audited? As part of our partnership with BioCote® Stuart® products have 1 Interruption of cell membrane undergone a rigorous validation process. This ensures that all products work effectively as an anti-microbial and that the bespoke additive solution is suitable. This is then supported with an ongoing Quality Control system offering certification for antimicrobial 2 Inhibition of enzymes efficacy. All validation and Quality Control is carried out by an independent accredited laboratory.

Where can I get more information? 3 Interruption of DNA strands For more information on BioCote® protection please visit www.biocote.com, alternatively visit www.stuart-equipment.com for more information on how BioCote® compliments the Stuart® range of products.

Whilst every effort has been made to ensure all possible external part of each Stuart® product is BioCote® protected, manufacturing and material constraints mean that we cannot guarantee this.

Stuart Science Equipment Catalogue Page 109 Technical Information Service & Repair

Our dedicated service staff are on hand to help, in the unlikely event that your Stuart® equipment develops a fault. Please contact them by one of the following means with a clear description of the problem;

E-mail: [email protected] Tel: +44 (0) 1785 810475 Fax: +44 (0) 1785 810471

On occasion it may be necessary for your equipment to be sent back to our Service Department for repair. In this case please contact the Service Department for a reference number, which you should include with your faulty equipment. Please also ensure you include a clear description of the fault and a completed copy of our Decontamination Certificate, to certify that the returned item is not contaminated with any harmful substance. The Decontamination Certificate is available as a download .PDF file at www.stuart-equipment.com, or contact us and we will be happy to fax you a copy. Please clearly mark the package for the attention of the Service Department and post to the following address:

Service Department Bibby Scientific Beacon Road Stone Staffordshire ST15 0SA United Kingdom

All replacement parts are guaranteed for 6 months and where ever possible returned equipment is turned around within 5 working days.

Please contact our Service Department for further information on onsite repairs and equipment calibration services.

Technical Support

Stuart have a dedicated Technical Support team who are on hand to help with any applications advice and questions you may have about our products and how to use them. The team is made up of experienced laboratory scientists whose backgrounds include chemistry, , cell and molecular biology. There are two fully equipped laboratories which are used for developing applications, testing new products and assisting with customer protocols. We aim to respond to queries on the same day if at all possible. If you have any technical queries concerning any of our products you may call our dedicated Technical Support phone line or email us at the following address:

E-mail: [email protected] Tel: +44 (0)1785 810433 Fax: +44 (0) 1785 810471

Page 110 Stuart Science Equipment Catalogue Technical Information CE Conformity

At Bibby Scientific we rigorously test our electrical products against the CE and Safety standards in place. In addition, the majority of our products are independently tested by an accredited test house. This is reinforced by comprehensive technical and manufacturing data which is available for inspection upon request. Copies of the Conformity Certificates may be downloaded from our website www.stuart-equipment.com

WEEE & RoHS Regulations

The Waste Electrical and Electronic Equipment (“the WEEE Regulations- Directive 2002/96/EC”) legislation is now in place in the UK. The primary purpose of the WEEE directive is the prevention of waste electrical and electronic equipment, and to require the re-use, recycling and other forms of recovery as to reduce such waste disposal to landfill or incineration.

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2005 (“the RoHS Regulations - Directive 2002/95/EC”) have now been passed into UK legislation. The primary purpose of these regulations is to restrict the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ether (PBDE) in new electrical and electronic equipment put on the market in the European Union after July 1, 2006.

As a responsible manufacturer, Bibby Scientific will comply with such regulation as it affects our products, and will continue to promote “clean” environmental manufacturing practices.

ISO9001:2008

The Bibby Scientific quality assurance system was first approved in 1993, and is currently certified to the International Quality Standard BS EN ISO 9001:2008. This means that Bibby Scientific is committed to providing the highest quality products, services and customer satisfaction.

The scope of our certificate No. FM537326 is: the design, manufacture and distribution of science equipment to national/international standards and customer specifications. Further details of certification may be downloaded from our website: www.stuart-equipment.com

Certificate No: FM 537326

Stuart Science Equipment Catalogue Page 111 Technical Information Key to Symbols

Gyratory motion Vortex motion The platform moves in a three The cup generates a ‘whirlpool’ dimensional motion vortex action

Orbital action Pivot action The platform moves in a circular orbit Simulates a vigorous shaking action

Rocking motion Rotating motion The platform rocks on a central pivot Unit revolves around a fixed point

Rotating motion Timer Platform revolves at a tilting angle Allows shaking times to be pre-set

Reciprocating action Platform moves back and forth horizontally

Page 112 Stuart Science Equipment Catalogue Technical Information IP Ratings

The IP rating system provides a means of classifying the degrees of protection from dust, water and impact afforded by electrical equipment and enclosures. The system is recognised in most European countries and is set out in BS EN 60529:1992 Degrees of Protection provided by enclosures (IP Code).

First number Definition (Protection against solid objects) 0 No protection 1 Protected against solids objects over 50mm (e.g. accidental touch by hands) 2 Protected against solids objects over 12mm (e.g. fingers) 3 Protected against solids objects over 2.5mm (e.g. tools and wires) 4 Protected against solids objects over 1mm (e.g. tools, wires and small wires) 5 Protected against dust - limited ingress (no harmful deposit) 6 Totally protected against dust

Second number Definition (Protection against liquids) 0 No protection 1 Protected against vertically falling drops of water 2 Protected against direct sprays up to 15º from the vertical 3 Protected against direct sprays up to 60º from the vertical 4 Protected against sprays from all directions - limited ingress permitted 5 Protected against low pressure jets if water from all directions - limited ingress permitted 6 Protected against strong jets of water e.g. for use on shipdecks - limited ingress permitted 7 Protected against the effects of temporary immersion between 15cm and 1m. Duration of test 30 minutes 8 Protected against long periods of immersion under pressure

The IP Ratings quoted in this catalogue are based on spillage tests carried out under BS EN 61010.

Stuart Science Equipment Catalogue Page 113 Technical Information

Solvent evaporation temperatures

Boiling point at Pressure at which 1013 mbar pressure b.p. = 40°C °C mbar

Acetone 56 556 n-amyl alcohol 37 11 Benzene 80 236 n-butanol 118 25 2-methyl-2-propanol 82 130 Chlorobenzene 132 36 Chloroform 62 474 Cyclohexane 81 235 Diethylether 35 Atmospheric 1,2-dichloroethane 84 210 1,2-dichloroethylene (cis) 60 479 1,2-dichloroethylene (trans) 48 751 Di-isopropyl ether 68 375 Dioxane 101 107 DMF (dimethylformamide) 153 11 Acetic acid 118 44 Ethanol 79 175 Ethyl acetate 772 40 Heptane 98 120 Hexane 69 335 Isopropylalcohol 82 137 3-methyl-1-butanol 129 14 MEK (methylethylketone) 80 243 Methanol 65 337 Methylene chloride 40 Atmospheric Pentane 36 Atmospheric n-propylalcohol 97 67 Pentachloroethane 162 13 1,1,2,2,tetrachloroethane 146 35 Carbon tetrachloride 77 271 1,1,1-trichloroethane 74 300 Tetrachloroethylene 121 53 THF (tetrahydrofuran) 67 357 Toluene 111 77 Trichloroethylene 87 183 Water 100 72 Xylene (mixed) 137 25 o-xylene 144 34 m-xylene 139 25 p-xylene 138 31

Page 114 Stuart Science Equipment Catalogue Technical Information

Standard melting points

Compound mp (°C) Mesityl bromide 39-41 Thymol 50-52 para-dichlorobenzene 52-54 Dibromoaniline 56-58 Vanillin 81-82 Glutaric acid 97-99 Resorcinol 109-110 Acetanilide 113-114 dl-Mandelic Acid 117-118 2-Naphthol 121-122 Benzoic acid 121-122 Succinimide 124-125 Benzamide 128-129 Benzoin 136-137 trans-Cinnamic acid 135-136 Urea 132-133 Maleic Acid 139-140 Anthranilic acid 146-147 Adipic Acid 152-153 Citric Acid 153-155 Salicylic acid 158-161 Benzanilide 162-164 Sulfanilamide 165-166 Cholesterol 148-150

Thermostatic bath & recirculating cooler liquid selection

The following table offers guidance on liquid selection for our range of thermostatic baths and recirculating coolers. Please consider carefully your liquid selection as some cooling mediums are ignitable above ambient temperatures. To maintain the condition of your Stuart® product we would always recommend using deionised water where possible rather than water from the mains supply. We don’t recommend distilled water which is slightly acidic and can corrode metallic parts.

50/50 Water/Ethylene glycol

Water

Polythylene glycol 200

Polyetrhylene glycol 400

-40ºC 0ºC 100ºC 200ºC Temperature Stuart Science Equipment Catalogue Page 115 Technical Information

SI Base units

Quantity Name of Base unit Unit Symbol

length metre m mass kilogram kg time second s electric current ampere A thermodynamic temperature kelvin K amount of substance mole mol luminous intensity candela cd

SI Derived Units

Quantity Unit Name Unit Symbol Expression in terms of SI base units

force Newton N m kg s-2 energy joule Jm2 kg s-2 power watt Wm2 kg s-3 pressure, stress pascal Pa m-1 kg s-2 electric potential volt Vm2 kg s-3 A-1 electric charge coulomb C s A electric flux coulomb C s A magnetic flux weber Wb m2 kg s-2 A-1 magnetic flux density tesla T kg s-2 A-1

2 -3 2 electric resitance ohm Ω m kg s A capacitance farad Fm-2 kg-1 s4 A2 inductance henry Hm2 kg s-2A-2 Celsius temperature degree Celsius ºC K frequency hertz Hz s-1 luminous flux lumen lm cd sr illuminance lux lx m-2 cd sr activity (of a radionuclide) Becquerel Bq s-1 absorbed dose gray Gy m2 s-2 dose equivalent sievert Sv m2 s-2 torque newton metre N m m2 kg s-2 electric field strength volt per metre V/m m kg s-3 A-1 magnetic field strength ampere per metre A/m m-1 A thermal conductivity watt per metre kelvin W m-1 k-1 m kg s-3 K-1 luminance candela per square metre cd/m2 m-2 cd

Page 116 Stuart Science Equipment Catalogue Technical Information

Physical constants

Constant Symbol Value Unit

-27 Atomic mass unit mu 1.660540 . 10 kg

23 -1 Avogadro constant NA 6.022137 . 10 mol

-24 -1 Bohr magneton µB 9.274015 . 10 JT

-11 Bohr radius ao 5.291771 . 10 m

-23 -1 Boltzmann constant kB 1.380662 . 10 JK

-12 Compton wavelength (e) λCe 2.426311 . 10 m -15 Compton wavelength (n) λCn 1.319591 . 10 m -15 Compton wavelength (p) λCp 1.321410 . 10 m -12 -1 Electric field constant in vacuo εo 8.854188 . 10 Fm -15 Electron radius re 2.817941 . 10 m Elementary charge e 1.602177 . 10-19 C Faraday constant F 9.648531 . 104 Cmol-1

-3 Fine structure constant α 7.297353 . 10 Gas constant R 8.31451 J mol-1K-1 Gravitation constant f 6.672590 . 10-11 Nm2kg-2

2 Intrinsic impedance r 3.767301 . 10 Ω Light velocity in vacuo c 2.997924 . 108 ms-1

25 -3 Loschmidt constant NL 2.686763 . 10 m

-7 -1 Magnetic field constant in vacuo µ0 1.256637 . 10 Hm

-2 3 -1 Molar volume of ideal gases υ 2.445294 . 10 m mol 298K, 101.325kPa Normal acceleration of fall g 9.80665 ms-2 Planck constant h 6.626075 . 10-34 Js

-31 Rest mass of the electron me 9.109390 . 10 kg

-27 Rest mass of the neutron mn 1.674929 . 10 kg

-27 Rest mass of the proton mp 1.672623 . 10 kg

-34 Rational quantum h/(2)π 1.054588 . 10 Js 7 -1 Rydberg constant R∞ 1.097373 . 10 m

Stuart Science Equipment Catalogue Page 117 Technical Information Periodic table No. – Atomic Number M.P – Melting point B.P. – Boiling point

Name Symbol No. Atomic M.P. ( ºC ) B.P. ( ºC ) Density Ionisation Weight (g/cm3) energy (eV)

Actinium Ac 89 227 1050 3200 10.07 5.17 Aluminum Al 13 26.9815 660 2467 2.7 5.9858 Americium Am 95 243 994 2607 13.67 5.9738 Antimony Sb 51 121.76 630 1750 6.68 8.6084 Argon Ar 18 39.948 -189 -186 15.7596 Arsenic As 33 74.9216 81 613 5.72 9.7886 Astatine At 85 210 302 337 9.3 Barium Ba 56 137.327 725 1140 3.59 5.2117 Berkelium Bk 97 247 986 14.78 6.1979 Beryllium Be 4 9.0122 1278 2970 1.85 9.3227 Bismuth Bi 83 208.9804 271 1560 9.75 7.2856 Bohrium Bh 107 264 Boron B510.811 2300 2550 2.34 8.298 Bromine Br 35 79.904 -7 59 3.12 11.8138 Cadmium Cd 48 112.411 321 765 8.65 8.9938 Calcium Ca 20 40.078 839 1484 1.55 6.1132 Californium Cf 98 251 900 15.1 6.2817 Carbon C612.0107 3500 4827 2.26 11.2603 Cerium Ce 58 140.116 795 3257 6.77 5.5387 Cesium Cs 55 132.9055 29 678 1.87 3.8939 Chlorine Cl 17 35.453 -101 -35 3.21 12.9676 Chromium Cr 24 51.9961 1857 2672 7.19 6.7665 Cobalt Co 27 58.9332 1495 2870 8.9 7.881 Copper Cu 29 63.546 1083 2567 8.96 7.7264 Curium Cm 96 247 1340 13.5 5.9915 Dubnium Db 105 262 Dysprosium Dy 66 162.5 1412 2562 8.55 5.9389 Einsteinium Es 99 252 860 6.42 Erbium Er 68 167.259 1522 2510 9.07 6.1077 Europium Eu 63 151.964 822 1597 5.24 5.6704 Fermium Fm 100 257 1527 6.5 Fluorine F918.9984 -220 -188 1.7 17.4228 Francium Fr 87 223 27 677 4.0727 Gadolinium Gd 64 157.25 1311 3233 7.9 6.1501 Gallium Ga 31 69.723 30 2403 5.91 5.9993 Germanium Ge 32 72.64 937 2830 5.32 7.8994 Gold Au 79 196.9665 1064 2807 19.32 9.2255 Hafnium Hf 72 178.49 2150 5400 13.31 6.8251 Hassium Hs 108 277 Helium He 2 4.0026 -272 -269 24.5874 Holmium Ho 67 164.9303 1470 2720 8.8 6.0215 Hydrogen H11.0079 -259 -253 0.09 13.5984 Indium In 49 114.818 157 2000 7.31 5.7864 Iodine I 53 126.9045 114 184 4.93 10.4513 Iridium Ir 77 192.217 2410 4527 22.4 8.967 Iron Fe 26 55.845 1535 2750 7.87 7.9024 Krypton Kr 36 83.8 -157 -153 13.9996 Lanthanum La 57 138.9055 920 3469 6.15 5.5769 Lawrencium Lr 103 262 1627 4.9 Lead Pb 82 207.2 327 1740 11.35 7.4167 Lithium Li 3 6.941 180 1347 0.53 5.3917 Lutetium Lu 71 174.967 1656 3315 9.84 5.4259 Magnesium Mg 12 24.305 639 1090 1.74 7.6462 Manganese Mn 25 54.938 1245 1962 7.43 7.434

Page 118 Stuart Science Equipment Catalogue Technical Information

No. – Atomic Number M.P – Melting point B.P. – Boiling point

Name Symbol No. Atomic M.P. ( ºC ) B.P. ( ºC ) Density Ionisation Weight (g/cm3) energy (eV)

Meitnerium Mt 109 268 Mendelevium Md 101 258 6.58 Mercury Hg 80 200.59 -39 357 13.55 10.4375 Molybdenum Mo 42 95.94 2617 4612 10.22 7.0924 Neodymium Nd 60 144.24 1010 3127 7.01 5.525 Neon Ne 10 20.1797 -249 -246 21.5645 Neptunium Np 93 237 640 3902 20.2 6.2657 Nickel Ni 28 58.6934 1453 2732 8.9 7.6398 Niobium Nb 41 92.9064 2468 4927 8.57 6.7589 Nitrogen N714.0067 -210 -196 1.25 14.5341 Nobelium No 102 259 827 6.65 Osmium Os 76 190.23 3045 5027 22.6 8.4382 Oxygen O815.9994 -218 -183 1.43 13.6181 Palladium Pd 46 106.42 1552 2927 12.02 8.3369 Phosphorus P 15 30.9738 44 280 1.82 10.4867 Platinum Pt 78 195.078 1772 3827 21.45 8.9587 Plutonium Pu 94 244 640 3235 19.84 6.0262 Polonium Po 84 209 254 962 9.3 8.417 Potassium K 19 39.0983 64 774 0.86 4.3407 Praseodymium Pr 59 140.9077 935 3127 6.77 5.473 Promethium Pm 61 145 1100 3000 7.3 5.582 Protactinium Pa 91 231.0359 1568 15.4 5.89 Radium Ra 88 226 700 1737 5.5 5.2784 Radon Rn 86 222 -71 -62 10.7485 Rhenium Re 75 186.207 3180 5627 21.04 7.8335 Rhodium Rh 45 102.9055 1966 3727 12.41 7.4589 Rubidium Rb 37 85.4678 39 688 1.63 4.1771 Ruthenium Ru 44 101.07 2250 3900 12.37 7.3605 Rutherfordium Rf 104 261 Samarium Sm 62 150.36 1072 1900 7.52 5.6437 Scandium Sc 21 44.9559 1539 2832 2.99 6.5615 Seaborgium Sg 106 266 Selenium Se 34 78.96 217 685 4.79 9.7524 Silicon Si 14 28.0855 1410 2355 2.33 8.1517 Silver Ag 47 107.8682 962 2212 10.5 7.5762 Sodium Na 11 22.9897 98 883 0.97 5.1391 Strontium Sr 38 87.62 769 1384 2.54 5.6949 Sulfur S 16 32.065 113 445 2.07 10.36 Tantalum Ta 73 180.9479 2996 5425 16.65 7.5496 Technetium Tc 43 98 2200 4877 11.5 7.28 Tellurium Te 52 127.6 449 990 6.24 9.0096 Terbium Tb 65 158.9253 1360 3041 8.23 5.8638 Thallium Tl 81 204.3833 303 1457 11.85 6.1082 Thorium Th 90 232.0381 1750 4790 11.72 6.3067 Thulium Tm 69 168.9342 1545 1727 9.32 6.1843 Tin Sn 50 118.71 232 2270 7.31 7.3439 Titanium Ti 22 47.867 1660 3287 4.54 6.8281 Tungsten W 74 183.84 3410 5660 19.35 7.864 Uranium U 92 238.0289 1132 3818 18.95 6.1941 Vanadium V 23 50.9415 1890 3380 6.11 6.7462 Xenon Xe 54 131.293 -112 -108 12.1298 Ytterbium Yb 70 173.04 824 1466 6.9 6.2542 Yttrium Y 39 88.9059 1523 3337 4.47 6.2173 Zinc Zn 30 65.39 420 907 7.13 9.3942 Zirconium Zr 40 91.224 1852 4377 6.51 6.6339

Stuart Science Equipment Catalogue Page 119 Technical Information

Catalogue Number Page Number Catalogue Number Page Number

A4000 101 RE3022C 80 A4000/220 101 SA3 68 A4000D 101 SA7 67 A4000D/220 101 SA8 66 A8000 101 SA8/1 66 A8000/220 101 ADH 103 SB16/1 20 ADI 103 SB16/2 20 AFD 103 SB16/3 20 AFH 102 SB16/4 20 AFI 102 SB16/5 20 ALC 102 SB16/6 20 SB16/7 20 CB160 18 SB160 18 CB161 37 SB161 37 CB162 26 SB161-3 38 CB300 21 SB162 26 CB302 32 SB162-3 27 CB500 22 SB2 60 CC162 29 SB3 61 CD162 30 SB3/1 60 CD162/1 30 SB3/1/PC 60 CP300 24 SB3/2 60 CR300 23 SB3/3 60 CR302 33 SB3/4 60 SB3/5 60 D4000 104 SB3/6 60 D4000/EURO 104 SB300 21 SB301 38 FD50/4RE/1 78 SB302 32 FD100/4RE/1 78 SB500 22 FD250/4RE/1 78 SB2/DUAL 60 FD500/4RE/1 78 SBH/2 6 FD500/4REP 78 SBH/3 6 FD1L/4RE/1 78 SBH130 2 FD1L4REP 78 SBH130D 3 FD2L/4RE/1 78 SBH130D/3 5 FD2L/4REP 78 SBH130DC 4 F7209 5 SBH200D 3 F7210 5 SBH200DC 6 FSC4NCS 5 SBH200D/3 5 FSC4NCL 5 SBHCONC/1 5 SBS40 96 I/BNP10A 106 SBS40/1 96 I/BNP20A 106 SBS40/2 96 I/WR20 106- SBS40/3 96 I/WS20 106 SBS40/4 96 SBS40/5 96 RE100/CO 79 SBS40/6 96 RE100/COP 79 SBS40/7 96 RE100/EA 78 SBS40/8 96 RE100/RF/100 78 SBS40/9 96 RE100/RF/1L 78 SBS40/10 96 RE100/RF/1LP 78 RE100/RF/250 78 SC162 29 RE100/RF/50 78 SC6 8 RE100/RF/500 78 SC6/1 8 RE100/RF/500P 78 SC6/1/3 8 RE100/VR 79 SC6/2 8 RE100/VS 79 SC6/3 8 RE100/VT 79 SC6/4 8 RE100/VT/CF 79 SC6/5 8 RE200/CF 79 SCT/1 28 RE200/CFD 79 SCT/2 28 RE200/CFP 79 SCT1 28 RE200/SA 78 RE200/VC 79 SD160 19 RE200/VCP 79 SD162 30 RE300 77 SD300 23 RE300DB 79 SD500 23 RE300P 77 RE3000B 79 SF1 92 RE301 77 SF1/1 92 RE301P 77 SF1/2 92 RE302 77 RE302P 77

Page 120 Stuart Science Equipment Catalogue Technical Information

Catalogue Number Page Number Catalogue Number Page Number

SHM1 12 SRT6DROLL 56 SHM2 13 SHM/5 14 SRT9 57 SHM/7 14 SRT9D 57 SHM/10 14 SRT9ROLL 57 SHM/20 14 SRT9DROLL 57 SHM/ADAPT 14 SRT/STACK 58 SHM/DISP 14 SHM/STAND 14 SHM/TOOL 14 SS10 70 SS10/1 72 SHT1/0 6 SS10/10 72 SHT1/10 6 SS10/11 72 SHT1/12 6 SS10/12 72 SHT1/12/33 6 SS10/13 72 SHT1/13 6 SS10/14 72 SHT1/16 6 SS10/2 72 SHT1/19 6 SS10/5 72 SHT1/20 6 SS10/6 72 SHT1/21 6 SS20 70 SHT1/22 6 SS30 71 SHT1/25 6 SHT1/28 6 SSL1 90 SHT1/3 6 SSL1/1 91 SHT1/30 6 SSL1/2 91 SHT1/30/1 6 SSL2 91 SHT1/33 6 SSL3 85 SHT1/384 6 SSL3/1 85 SHT1/4 6 SSL4 85 SHT1/48 6 SSL5 88 SHT1/80 6 SHT1/96 6 SSM1 89 SSM1/1 89 SI19 41 SSM1/2 89 SI20H/1 43 SSM1/3 89 SI20H/2 43 SSM3 84 SI20H/3 43 SSM3/1 84 SI20H/4 43 SSM4 84 SI20H/5 43 SSM5 88 SI20H/7 43 SSM5/1 88 SI30H 43 SSM5/2 88 SI500 44 SI500/1 45 STR1/1 62 SI500/2 45 STR1/2 62 SI500/3 45 STR1/3 62 SI500/4 45 STR1/4 62 STR4 62 SI60 46 STR4/1 62 SI60/1 46 STR4/2 63 SI60/2 46 STR4/3 63 SI60D 46 STR4/4 64 STR4/5 64 SM27 36 SM27/1 36 SW5 10 SM27/2 36 SW6 10 SM27/3 36 SW6/2 10 SM4 36 SWB1 94 SMP1/2 52 SWB1/1 94, 95 SMP1/4 34 SWB1D 95 SMP10 51 SWB2 94 SMP10/1 51 SWB2/1 94 SMP11 52 SWB2D 95 SMP11/1 52 SWB3 94 SMP2/1 52 SWB3/1 94, 95, 96 SMP30 50 SWB3D 95 SMP30/1 50 SMP40 48 W4000 105 W4000/EURO 105 WCK/N 102 SR1 20 WEW601P 106 SR3 27, 38 SRC3 74, 80 SRC14 74 SRT6 56 SRT6ROLL 56 SRT6D 56

Stuart Science Equipment Catalogue Page 121 Technical Information

Item Page Number Item Page Number

Acrylic incubator 46 - Digital 19, 23 Aquatron® water still 101 - Large capacity 21, 22 Aspirators 106 - PTFE 24 B Baths Hybridisation - Shaking 96 - Incubator 43 - Water 94, 95, 96 - Bottles 43 Battery stirrer 36 I Blocks 6 Incubators Block heaters - Acrylic 46 - Analogue 2 - Hybridisation 43 - Digital 3, 5 - Microtitre plate 41 - Dual control 4 - Orbital shaker 44 Blood tube rotator 60, 61 Infrared Bottle rollers 56, 57 - Hotplate 23 Bottle shakers 90, 91, 92 - Stirrer hotplate 33 Bottles, hybridisation 43 M C Magnifiers 8 Capillary tubes 52 Magnetic stirrers Ceramic - Accessories 20 - Hotplates 18, 21, 22, 23, 24 - Battery operated 36 - Stirrers 37 - Ceramic top 37 - Hotplate stirrers 26, 33 - Heavy duty 38 Cold finger condenser 77 - Hotplate 26 - 33 Colony counter 8 - Metal top 37. 38 Cooler 80, 74 - Mini 36 Covers 6, 94 - Three position 38 Culture tube holders 60 Melting point apparatus Dry block heaters 2, 3, 4, 5 - Advanced 50 De-ioniser 102 - Analogue 52 Diagonal condenser 77 - Automatic 48, 49 Distinction® water still 104 - Digital 51 E Merit water still 105 Electrical safety 111 Microtitre plate Evaporators - Block 6 - Accessories 80 - Incubator 41 - Bath 79 - Shaker 88 - Condensers 77 Mixers - Glassware 78 - Rollers 56, 57, 58 - Plastic coated 77 - Rotators 60 - 64 F - Vortex 66, 67 Filter 102 N Flask shaker 92 Needles 5 Flocculators 10 Needles, PTFE 5 G O Gable covers 94, 95 Orbital Graticule, Wolffhuegel 8 - Shakers 89 - 91 Gyro-rocker® 84, 85 - Shaker bath 96 H - Shaker incubator 44 Heaters, test-tube 2, 3, 4, 5 Overhead stirrers Heating blocks 6, 20 - Dual torque 71 Homogenisers - High performance 70 - Handheld 12 - General purpose 70 - Laboratory 13 - Paddles 72 - Probes 14 - Stands 72 - Stand 14 Hotplates Paddles 72 - Accessories 20 Platform shakers 89 - 91 - Aluminum top 18, 19, 21, 22, 23 Protective covers 6, 20, 94 - Ceramic top 18, 21, 22, 23, 24 - Infrared 23

Page 122 Stuart Science Equipment Catalogue Technical Information

Item Page Number Item Page Number

Receiver flasks 78 - Digital 95 Reciprocating shaker 91 - Shaking 96 Recirculating cooler 74, 80 Reservoirs 106 Water stills Retort rods 20 - Accessories 106 Rockers - Aquatron® 101 - Labscale 85 - Distinction® 104 - Mini 84 - Merit 105 - Gyro rocker 84, 85 - See Saw 84, 85 Rotary evaporators - Accessories 80 - Bath 79 - Condensers 77 - Glassware 78, 79 - Plastic coated 77 - 79 Roller mixers 56, 57 Rotators - Blood tube 60, 61 - Bottle 63 - Test tube 60, 61, 62 S Sample concentrator 5 Shakers - Flask 91, 92 - Hybridisation 44 - Labscale 90, 91 - Microtitre 88 - Mini 89 - Orbital 89, 90 - Reciprocating 91 Shaking - Incubator 44 - Waterbath 96 Stacking system 58 Stirrers - Accessories 20 - Battery operated 36 - Ceramic top 37 - Heavy duty 38 - Hotplate 26 - 33 - Metal top 37, 38 - Mini 36 - Three position 38 T Temperature controller 28 Test-tube - Heaters 2, 3, 4, 5 - Rotators 60, 61, 62 52 V Vacuum pump 80 Vertical condenser 77 Vortex mixers - Accessory pack 66 - Fixed speed 67 - Mini 68 - Variable speed 66 W Water bath - Analogue 94 - Covers 95

Stuart Science Equipment Catalogue Page 123 Bibby Scientific - UK (Group HQ) Beacon Road, Stone, Staffordshire, ST15 0SA, United Kingdom Tel: +44 (0)1785 812121 Fax: +44 (0)1785 810405 e-mail: [email protected] www.bibby-scientific.com

Bibby Scientific - France BP79, 77793 Nemours Cedex, France Tel: +33 1 64 45 13 13 Fax: +33 1 64 45 13 00 e-mail: [email protected] www.bibby-scientific.fr

Bibby Scientific - Italy Via Alcide de Gasperi 56, 20070 Riozzo Di Cerro Al Lambro, Milano, Italy Tel: +39 02 98230679 Fax: +39 02 98230211 e-mail: [email protected] www.bibby-scientific.it

Bibby Scientific - US 3 Terri Lane, Suite 10, Burlington, NJ 08016, USA Tel: +1 609 589 2560 Fax: +1 609 589 2571 e-mail: [email protected] www.techneusa.com

Bibby Scientific - Asia Room 607, Yen Sheng Centre, 64 Hoi Yuen Road, Kwun Tong, Hong Kong Tel: +852 3583 1581 Fax: +852 3583 1580 e-mail: [email protected] www.bibby-scientific.com.cn

Bibby Scientific - Middle East PO Box 27842, Engomi 2433, Nicosia, Cyprus Tel: + 357 22 660 423 Fax: + 357 22 660 424 e-mail: [email protected] www.bibby-scientific.me

© Copyright 2009