Alloys Alloyed More than \] ^ of global strip demand is covered by our alloy portfolio. ISO UNS EN JIS Buffalo Pori Stolberg Zutphen CuZn00.1Sn0 C?44.. C?44

Pure alloys and low-alloyed copper* CuZn5.1Sn4 C?41.. C?41. C?41 ISO UNS EN JIS Buffalo Pori Stolberg Zutphen CuZn0?Fe..:Sn..: C66?;. OCPX Cu-OFE (OF-Cu) C0.0.. CW..5A C0.00 C0.0 Cu-OFE PNA 4.; Copper- alloys Cu-OF C0.4.. CW..:A C0.4. C0.4 Cu-OF ISO UNS EN JIS Buffalo Pori Stolberg Zutphen Cu-HCP (SE-Cu 19) C0.;.. CW.40A C0.; Cu-HCP PNA 40. SM..0; CuSn4Fe..0P...; C1.901 KLF-1* Cu-XLP / Cu-PHC (SE-Cu 1:) C0.;.. CW.4.A C0.; Cu-XLP PNA 4.5 SM..00 CuSn4Zn4.4Fe..0P...; C1.941 KLF-1Z* CuAg...;(OF) (CuAg...;P) C00;.. PNA 4.4 CuSn0 PNA 45: CuAg...? (OF) C0.?.. CW.09A CuAg...? (OF) CuSn4 PNA 4:: CuAg...?1 (OF) CuAg...1 (OF) CuSn? C100.. CW?1.K C1000 C100 Nordic Bronze™ PNA 4:? CuAg..0.P C0.9.. CW.06A CuAg..0.P PNA 409 CuSn1 C10... CW?10K C10.4 C10. PNA 4:1 CuAg..0. C0.9.. CW.0;A CuAg..0. CuSn6 C105.. CW?14K C1050 C105 PNA 4:4 CuAg..0. (OF) C0.9.. CW.05A CuAg..0. (OF) CuSn: C140.. CW?1;K C140 PNA 4:; Cu-ETP (E-Cu) C00... CW..?A C00.. C00. Cu-ETP PNA 400 SM...: CuSn0. C14?.. C14? PNA 454 Cu-DLP C04... CW.4;A C04.0 C04. Cu-DLP PNA 44. CuSn04 PNA 451 Cu-DHP (SF-Cu) C044.. CW.4?A C0440 C044 Cu-DHP PNA 405 Special Cu proBraze ® alloys Cu-DHP C0440. CW.4?A C044. Cu-DHP SM..4: ISO UNS EN JIS Buffalo Pori Stolberg Zutphen CuTe...4Sn...4 C0?1;. C0?1; SM.;.. CuCr..4 SM.1.4 CuSn...? CuSn...? SM.9.. CuZn01Fe..: C66?4. SM4;:1 CuSn...5 CuSn...5 SM.9.0 Cu6?ZnNi; C9??.. SM4?6? CuSn..01 C0??01 CW009C C0??01 CuSn..01 PNA 406 SM.9.4 Special bronze CuSn..4 C0??0. C0??0 PNA 401 ISO UNS EN JIS Buffalo Pori Stolberg Zutphen CuFe..0P C0540. KFC* PNA 40? CuAl1Zn1Sn0 Nordic Royal™ PNA ;05 CuZn..1 CW005C CuZn..1 PNA 40: CuNi0.Fe0Mn C9.6.. CW;14H PNA ;;? Brass High performance alloys ISO UNS EN JIS Buffalo Pori Stolberg Zutphen ISO UNS EN JIS Buffalo Pori Stolberg Zutphen CuZn1 C40... CW1..L C40.. C40. PNA 440 CuZr..0 C010.. C010 PNA 456 CuZn0. C44... CW1.0L C44.. C44. PNA 444 SM0.5. CuMg..0 C011.. C011 PNA 459 CuZn04.1 C446.. C446 CuMg..6 C0:661 C0:661 PNA ;51 CuZn01 C4;... CW1.4L C4;.. C4;. Nordic Brass™ PNA 44; SM0.:1 CuNi0.1Si C05.0. C05.0. PNA 45. CuZn4. C4?... CW1.;L C4?.. C4?. PNA 44? CuFe4P C05?.. CW0.9C C05?. C05? PNA 404 CuZn4: CW1.?L PNA 441 CuFe4PMg C05?.. C05? PNA 4.6 CuZn;. C46... CW1.1L C46.. C46. PNA 446 SM0.9. CuFe..9MgP C059.. C059 PNA 4.1 CuZn;.As C460;. CW9.9R SM4:9. CuSn0.4Ni..:P...9 C05.?. CAC1* CuZn;; C46:.. CW1.6L C46:. C46: PNA 449 SM0.69 CuNi..1Sn..1 C05.44 UNILLOY CuZn;1 C46:.. C46:. SM0.61 CuNi0.:Si..?Zn0.0SnMg C6?96. CAC6.* CuZn;1P SM4561 CuNi;SiMg C9.41. C9.41 PNA ;9. CuZn;6 C49... CW1.9L C49. PNA 4?: SM0.6? CuNi4Si..? C9.46. CW000C C9.46 CuZn;9 C494.. CW1.:L C494. C494/C49? PNA 4?; SM0.6; CuZn?. C4:... CW1.5L C;904 C4:. PNA 46. Aurubis also supplies slightly modified alloys with special properties, e.g. in accordance with Oeko-Tex Standard hii and US Federal Regulations. CuZn?4 BlueBrass ® PNA 499 * available in US.

" Aurubis • Rolled Products Aurubis • Alloys ! Technology with outstanding possibilities

Slitting Centers Aurubis has established a network of slitting and distri- bution centers in Europe (Italy, Netherlands, Slovakia, United Kingdom) and Asia and cooperates with partners worldwide. Furthermore, the slitting centers also function as service centers.

Aurubis has the largest continuous These different technologies provide cooperation for customers. The casting production capacities high flexibility, custom products and technical center for developing and worldwide. efficient mono-manufacturing manufacturing thermal management Several state-of-the-art casting of large lot sizes. solutions offers accelerated technologies such as cake casting Aurubis produces the largest copper tests and wind tunnel tests for (with consecutive hot rolling) and coils in the world with the tightest and charge air coolers vertical and horizontal strip casting tolerances. In addition, Aurubis uses (CACs), for instance. (both with consecutive cold rolling) the most efficient technology and of- Aurubis has the variety of material, are used to produce consistent and fers innovative assistance in Research production capabilities and knowledge high quality rolled products. & Development as well as technical to meet customer requirements.

Unique range of dimensions Thickness in mm Width in mm Thickness in inches Width in inches Industrial strip R.RST – S.RRR T – VWVX R.RRYR – R.WSTZ R.VXS – [\.RRR cooling strip R.RWT – R.TRR T – YWR R.RRVR – R.RVXS R.VXS – VW.TX\ Cable strip & foil R.RWT – R.TRR T – ZYT R.RRVR – R.RVXS R.VXS – WT.RRR Industrial foil R.RWT – R.VRR VR – ZRR R.RRVR – R.RR[R R.YX[ – WY.ZWW Sheets < W mm / R.RS\S inch R.YRR – W.RRR YTR – VWVX R.RVV\ – R.RS\S VY.S\R – [\.RRR Sheets > W mm / R.RS\S inch W.RRR – Z.RRR T[R – VVRR R.RS\S – R.WYZZ WV.TX\ – [Y.YRS Plates Z.RRR – WRR VRR – VVRR R.WYZW – S.\S[R Y.XYS – [Y.YRS Circles R.YRR – Y.RRR ZT – VRTR R.RVV\ – R.VV\V W.TTX – [V.YY\ Ratio of width to thickness on request.

!" Aurubis • Rolled Products Tin-plated solutions with outstanding possibilities

Properties and applications In order to meet the high demands of the automotive, elec- coating: hot-dip tinning, electroplating and electroplating trical and electronical industries on connectors and stamped with a subsequent reflow treatment. grids – such as low insertion forces, good corrosion resis - Accordingly, copper and copper alloy strip can be coated tance and good solderability – the strip used is required to with a variety of metals. Pure tin coatings are particularly have surface treatments. Three main processes are used for important due to their economic efficiency.

Hot-Dip Tinning Tin layer thickness incl. tolerances Strip thickness in mm Main properties (standard tin-plating CC.C D) R.\ – V.T µm Low insertion force V.R – Y.R µm Low insertion force, corrosion protection W.R – [.R µm Air level Good corrosion protection R.VR - V.TR Y.R – Z.R µm mechanical wipe [.R – \.R µm Good solderability T.R – VR.R µm VR.R – VZ.R µm Special applications

Electroplating Strip thickness in mm Main properties Good electrical contact, low insertion force and / Tin matte / bright / brushed or corrosion protection Tin reflowed Mitigates whiskers R.WR – R.\R Nickel Special applications and diffusion barrier (underlayer) TN (available in US) Very low insertion force TQ (available in US) Long-term solderabiltiy Good electrical contact, low insertion force and / R.VR – [.R Tin matte / bright / brushed or corrosion protection Tin reflowed Mitigates tin whiskers Advanced reflow tin Long-term solderability Super thin advanced reflow R.VR – W.R Very low insertion force tin (STAR) Nickel Special applications and diffusion barrier (underlayer) High corrosion protection, higher resistance

In-house production Copper underlayer and selective plating on request.

!; Aurubis • Rolled Products