TAJFUN FIREWOOD PROCESSORS PTO DRIVEN, FAST & EFFICIENT. ONLY 35 HP REQUIRED!

See it in action!

NEW! RCA 480 JOY Now the largest capacity fi rewood processor that Tajfun builds. One hand joystick operation, 19” diameter log capacity, multiple wedge confi gurations, 25 tons of splitting force, (3.5 second cycle time), variable speed slewing discharge conveyer, 420 RPM PTO input/speed 35 HP required, 24” bar with 3/8 pitch . Compatible with: RN5000M live deck, XE- 10-Hy sawdust blower, SP 10 chip separator. WELL-PROVEN! RCA 400 JOY Tajfun’s work horse for the past several years! Same one hand joystick operation, 16” diameter log capacity, multiple wedge confi gurations, 15 tons of splitting force, (3 second cycle time), variable speed slewing discharge conveyer, 420 RPM PTO input/ speed 35 HP required, 17” saw bar with 3/8 pitch chain. Compatible with: RN3000M live deck, XE-10-Hy sawdust blower, SP 10 chip separator.

For the producer with smaller logs and a few less cords to do. One hand joy stick operation, 13” diameter ASK ABOUT THE log capacity, fast splitting time, bar and chain cut off, 8” to 16” fi rewood length, variable speed discharge ECONOMY RCA 330 conveyor, optional PTO or engine drive, 3 point hitch or trailing.

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 58 www.oescoinc.com email: [email protected] TAJFUN MOBILE PROCESSOR & ACCESSORIES TAJFUN’S WOOD PROCESSORS ARE ON THE MOVE!

THE BEST OF BOTH WORLDS! RCA 400/480 JOY MOBILE The speed and safety of the PTO driven Tajfun wood processers, on a self-contained mobile platform. The mobile platform can be used with either the RCA400 Joy, or the RCA 480 Joy. The 37hp EFI gasoline-powered Kohler engine runs either of these machines and folds out of the way for transport. The live deck and discharge conveyer also fold hydraulically for transport. With four stabilizers, setup and teardown is quick and easy.

Tajfun Grapples Bini Rotators Precise, Effi cient, and For continuous rotation of log grapples Two models of Bini Rotators for use with Tajfun log grapples: the T.6 SF 360, and Easy to Operate the T.10 SF 360. Crafted of hardened and tempered steel C45 for the output The newly redesigned and in stock GO-026X, GO-037X, shaft and ductile cast iron EN-GJS-500-7 for other moulded components. 140 35 T.6 SF 360°

and GO-043X Tajfun Grapples can handle over 80.5 45

11,000 lbs. of dense hardwood with ease, giving you 38 precise control over any situation. Their improved per- T.6 SF 360 Rotator

formance is due to a well-researched update in grapple Technical data: Hydraulic 310 geometry, as well as an effective design. Constructed rotator for log grapples 208

with heavy duty pins and bushings. Bright coloring now is designed to achieve a 33 allows the operator to safely use them day or night, with torque of 1,172 ft/lbs, at 220 A 268 increased visibility allowing for greater precision. a pressure of 2,900 PSI, Rotator Grapple Open and will support an axial Grapple Close load of 13,200 lbs. 34

Techical data GO-026X GO-037X GO-043X 292

173  (6x) 17 Grapple Open 2 2 2 A - Volume Capacity 2.8 ft 3.9 ft 4.4 ft T.10 SF 360 Rotator 84 Grapple 190 Close Technical data: Hydraulic DIRECTION A B – Min. Opening 0.3 ft 0.4 ft 0.4 ft rotator for log grapples T.10 SF 360° 240 is designed to achieve a Rotazione Rotation 35 Rotation Drehen 140 Вращение Rotación Continua Unlimited Continue Unbegrentz80.5 Постоянное Continua

C - Max. Opening 5 ft 5.8 ft 6.3 ft torque of 1,621 ft/lbs, at Carico assiale statico Static Axial Load Charge axiale statique 47 Traglast axial statisch Статическая Carga axial estática 60 kN - 60 кН (13448 lbf)

грузоподъёмность 43 a pressure of 2,900 PSI, Carico assiale dinamico Dynamic Axial Load Charge axiale dynamique Traglast axial dynamisch Динамическая Carga axial dinámica 30 kN - 30 кН (6744 lbf) грузоподъёмность

D 2.4 ft 2.6 ft 2.6 ft Coppia/200 bar Torque/200 bar (2900 psi) Couple/200 bar Drehmoment/200 bar Ващающий Par de rotación/200 bar 1590 Nm (Нм) - (1173 lbf ft)

and will support an axial момент/200 бар 318 load of 22,000 lbs. Cilindrata Displacement Cylindrée Hubraum Объём Cilindrada 245 cm^3 220

E 2.9 ft 3.2 ft 3.4 ft Peso Weight Poids Gewicht Масса Peso 51 Kg. (к г. ) - (112 lb)

Pressione d’esercizio Max. working pressure Pression de travail maxi. Betriebsdruck max. Давление рабочей33 жидкости Presión de trabajo max. 250 bar (250 бар) max. 220 при вращении (макс.) A F - Height (closed) 1.7 ft 1.9 ft 2.1 ft Pressione pinza Grapple pressure Pression pince Druck Greiferzange Давление захвата Presión Pinza 300 bar (300 бар) 38 RACCORDI COUPLINGS RACCORDS ANSCHLÜSSE ПРИСОЕДИНИТЕЛЬНЫЕ EMPALMES Grapple РАЗМЕРЫRotator

R = Rotazione R = Rotation R = Rotation R = Drehen R = Вращение R = Rotación G 1/2

G - Min. Span 2.7 ft 3.1 ft 3.3 ft GO = Apertura pinza GO = Grab open GO = Ouverture GO = Greifer öffnen GO = Открытие грейфера GO = Abertura G 1/2 173

GC = Chiusura pinza GC = Grab close GC = Fermeture GC = Greifer schliessen GC = Закрытие грейфера GC = Cierre G 1/2

Grapple 13 BINI HCS ) H - Profile Width 1.3 ft 1.5 ft 1.5 ft x 85 Open 6  ( Grapple 7 190 1 Close  406 DIRECTION A Opening time at flow 1.1 sec 1.9 sec 2.1 seс rate of 13,75gal/min Rotazione Rotation Rotation Drehen Вращение Rotación Continua Unlimited Continue Unbegrentz Постоянное Continua

Carico assiale statico Static Axial Load Charge axiale statique Traglast axial statisch Статическая Carga axial estática 100 kN - 100 кН (22480 lbf) Closing time at flow rate грузоподъёмность 1.7 seс 2.5 seс 2.6 seс Carico assiale dinamico Dynamic Axial Load Charge axiale dynamique Traglast axial dynamisch Динамическая Carga axial dinámica 50 kN - 50 кН (11240 lbf) of 13,75 gal/min грузоподъёмность

Coppia/200 bar Torque/200 bar (2900 psi) Couple/200 bar Drehmoment/200 bar Ващающий Par de rotación/200 bar 2200 Nm (Нм) - (1623 lbf ft) момент/200 бар Clamping force (A) 3147 lbs 4271 lbs 4046 lbs Cilindrata Displacement Cylindrée Hubraum Объём Cilindrada 300 cm^3

Peso Weight Poids Gewicht Масса Peso 59 Kg. (к г. ) - (130 lb)

Pressione d’esercizio Max. working pressure Pression de travail maxi. Betriebsdruck max. Давление рабочей жидкости Presión de trabajo max. 250 bar (250 бар) Maximum operating max. при вращении (макс.) 3625 psi 3335 psi 3335 psi Pressione pinza Grapple pressure Pression pince Druck Greiferzange Давление захвата Presión Pinza 300 bar (300 бар) pressure RACCORDI COUPLINGS RACCORDS ANSCHLÜSSE ПРИСОЕДИНИТЕЛЬНЫЕ EMPALMES РАЗМЕРЫ

R = Rotazione R = Rotation R = Rotation R = Drehen R = Вращение R = Rotación G 1/2 GO = Apertura pinza GO = Grab open GO = Ouverture GO = Greifer öffnen GO = Открытие грейфера GO = Abertura G 1/2 o G 3/4 Capacity 8992 lbs 11240 lbs 11240 lbs GC = Chiusura pinza GC = Grab close GC = Fermeture GC = Greifer schliessen GC = Закрытие грейфера GC = Cierre G 1/2 o G 3/4

BINI HCS 14 Weight 342 lbs 474 lbs 530 lbs

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 since 1954 www.oescoinc.com email: [email protected] 59 5YEARS New from Tajfu-LIV

TAJFUN ACCESSORIES TAJFUN LIVE DECKS ARE BUILT TO RUN RIGHT OFF THE PROCESSORS! No tractor hydraulics necessary.

These decks are 6’ wide and can handle logs up to 20’ long. Six adjustable jacks compensate for uneven ground. The trailer package makes them easy to move from one place to another. LIVE DECK TAJ RN 5000M Compatible with the RCA 480 JOY.

RN 1500 LIVE DECK TAJ RN 1500F Hydraulically folding live deck, designed to be used on a trailer or mobile set up.

SAWDUST EXTRACTOR TAJ XE-10-Hy Adapts to the sawdust discharge of the processor. Runs off the tractor hydraulics to blow the sawdust into a bin or collection bag.

CHIP SEPARATOR TAJ SP 10 Bolts on the discharge conveyer to divert chips and bark out of the truck or away from the wood pile.

LOG LOADER TAJ DM 1511M An accessory for Tajfun fi rewood processors RCA 380 & RCA 400 Joy. Used for lifting logs to the working height of the pro- cessor’s in-feed belt. Can LOG FEEDER TAJ E01 also be used to hold the This log feeder can be purchased separately, for next log to be processed. those who want to build their own log brow with a Loader is equipped with feeder. The feed speed is synchronized with the 2 hydraulically driven infeed belt of the processor and runs from the in-feed rollers synchro- processor. nized to the speed of the processor’s in-feed belt.

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 60 www.oescoinc.com email: [email protected] TAJFUN WINCHES THE MOST POPULAR LOGGING WINCHES IN THE WORLD! Sold in over 50 countries.

Tajfun has introduced this series of winches in response to users’ suggestions over the years.

Standard equipment includes 200’ of swaged cable, 3 sliders, parallel , high & low pulleys, chain saw holder, fold down brush screen & PV or Pickaroon holder. boxes included on EGV45 and up.

Models ending in A are“rope pull” actuated & very easy to use.

Models ending in AHK have a self contained hydraulic system which actuates the clutch and brake. The cable drum is still powered by the tractor PTO. These winches also require a 12V power supply from the tractor.

Instead of ropes the AHK winch is equipped with a control pendant that can easily reach the driver’s seat or either side of the tractor for ease of control and visibility. The AHK system can also be fitted with an optional radio remote control and/or power off spooling (both options great when working alone).

* Available on AHK models by special order: Radio control & power off spooling

TYPE EGV 35A EGV45A EGV55A EGV65A EGV85A EGV 45 AHK* EGV 55 AHK* EGV 65 AHK* EGV 85 AHK* Pulling Power 7,900 lbs. 10,000 lbs. 12,250 lbs. 14,500 lbs. 19,000 lbs. Brake Power 9,900 lbs. 12,500 lbs. 15,500 lbs. 18,000 lbs. 23,500 lbs. Gear Ratio 01:07.5 01:08.9 01:08.9 01:10.8 01:10.7 Rope Velocity 200-390 ft./min. 177-354 ft./min. 177-350 ft./min. 164-325 ft./min. 167-360 ft./min. Cable Length 200’ 200’ 200’ 200’ 200’ Swaged Cable 3/8” 7/16” 7/16” 1/2” 1/2” Min. Tractor 20-30 HP 24-47 HP 40-54 HP 54-90 HP 75-120 HP Capacity Required Width 48” 55” 60” 65” 71”

WIDE FRAME WINCHES DOUBLE DRUM WINCH Both models are available with rope pull or hydraulic actuation. Two independently controlled drums, each with 255’ of swaged TAJ EGV55 A 60” standard blade (right, above) cable. Controlled by a hard wired control pendant. Radio remote TAJ EGV55 A 1.8 71” wide blade (left above) control also available. TAJ DGV 2X55AHK

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 since 1954 www.oescoinc.com email: [email protected] 61 5YEARS OTHER HANDY WOODLOT

EASILY MOVE BRUSH & LOGS! RUGGED & ECONOMICAL! GRAPPLE UNIT SPLIT TOP GRAPPLE For front end loaders, tractor or skid steer. Single or double This is a rugged economical way to enhance the utility of your tractor. clamp available. Mounting plates to fi t most loaders. Great for The bypassing design allows you to clamp even the smallest moving brush and logs! Requires mounting kit. diameters. Mounting plates available for most loaders. Move logs, WOR FLGR-277 brush, rocks, stumps etc. As with all grapples; the clamp is actuated by your remote hydraulics. Requires mounting kit. SUN GR40 Call for SPLIT-FIRE wood splitter sizes and pricing.

SPLIT-FIRE THREE POINT HITCH SPLITTERS Splits in two directions! Fast, powerful & effi cient! Tractor remote, or PTO self-contained hydraulics. 24”, 30”, 36”, 48” log length 16 ton, 20 ton, or 32 ton

MAKE YOUR OWN TABLES, BENCHES & STOOLS RITE LEG TABLE, BENCH & STOOL LEGS • Hot dipped galvanize, or powder coated matte black fi nish • Can also be used with marble or other cut stone tops • Create your own unique piece of furniture • Three legged stools never rock

HOT-DIPPED GALVANIZED TABLE LEGS

ALISSA ALISSA BARSTOOL BASE TABLE LEGS

DANIELLE BENCH LEGS DANIELLE WITH POWDER COATED BARSTOOL DANIELLE ALISSA BLACK MATTE FINISH BASE STOOL BASE STOOL BASE

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 62 www.oescoinc.com email: [email protected] LOGGING ARCHES / SKIDDING ACCESSORIES LogRite Arches are perfect for moving logs of all sizes with minimal impact on the land. For arborists, owners, and forest land owners FETCHING ARCH Our most versatile arch in the 2’ diameter and 1 ton category. The fetching arch is designed to do the heavy lifting on steep slopes or sensitive areas that are off limits to ATVs or tractors. LOG FA025 JUNIOR ARCH • Log Capacity: 16” diameter Extension handle available BTS HAULER • Weight Capacity: 1000 lbs. LOG JH036 The ultimate hand-truck/conversion cart! 1500 lb. capacity. • Weight: 66 lbs. LOG BTS036 - with standard 4.8/4-8 tires LOG JA016 LOG BTS036W - with 16/6.5-8 wide tires. ATV ARCH • Log Capacity: 26” diameter • Weight Capacity: 2000 lbs. • Weight: 265 lbs. LOG AA024

Cart mode

Wide tires

Standard tires TOP QUALITY PEAVEY SKIDDING TONGS These tongs are beefed up in the areas where there is likely to be the greatest stress. Ideal for handling poles & logs. STANDARD RING PEA R-003-016-0685 - 3/4”x16” PEA R-007-020-0687 - 1”x20” PEA R-007-025-0687 - 1”x25” standard PEA R-011-032-0689 - 1 1/4”x32” SWIVEL RING TRACTOR ARCH TA030 TRACTOR ARCH TA036 PEA R-003-016-0693 - 3/4”x16” swivel • Log Capacity: 30” diameter • Log Capacity: 36” diameter PEA R-007-020-0695 - 1”x20” • Weight Capacity: 4000 lbs. • Weight Capacity: 6000 lbs. PEA R-007-025-0695 - 1”x25” • Weight: 515 lbs. • Weight: 515 lbs. PEA R-011-032-0697 - 1 1/4”x32” LOG TA030 LOG TA036

Tire chains of all sizes & descriptions! SNATCH BLOCK Call for information. 5”, 4 1/2 ton snatch WRC SB5 - 5” block w/ easy open WRC SB6 - 6” bale. WRC SB8 - 8” CHOKER HOOK .78 lbs. WAL 31316228

80” CHOKER CHAIN ASSEMBLY GLIDER 5/16” x 80” L 8.1 lbs. 1.5 lbs. WAL 5167G70A WAL 31336221

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 since 1954 www.oescoinc.com email: [email protected] 63 5YEARS WOODLOT HAND TOOLS

PEAVEY Forged steel socket & driven pick is fi tted w/ Maine hardwood Blue handle is easy to see around a woodlot or sawmill. handles & duck bill hook. Used with larger logs. Heat-treated, zinc plated hook is strong & built to last. PEA T-029-030-0119 - 2 3/8” x 2 1/2’ • 5.5 lbs. Handles available in 5 different lengths with a cant hook style PEA T-029-042-0121 - 2 3/8” x 3 1/2’ • 6.5 lbs. tip. Rubber grip makes the tool easier to hold. LOG CH024 - 24” grips 8” to 32” logs • 8 lbs. LOG CH030 - 30” grips 8” to 32” logs • 8 lbs. MILL FAVORITE CANT HOOK LOG CH042 - 42” grips 8” to 32” logs • 9 lbs. Rigged w/ fl at bill hook. Used in skidway LOG CH048 - 48” grips 8” to 32” logs • 9 lbs. work & log trucks - lighter duty. LOG CH060 - 60” grips 10” to 36” logs • 10 lbs. PEA T-019-030-0267 30” handle • 3 lbs. PEAVEY (Patent pending) The peavey uses the same blue aluminum handle & the same heat-treated, zinc plated hook. Handles available in 4 different PICKAROON lengths. The tip is a point (peavey style). Its light weight makes logs a This tool is chipper safe, with a cast aluminum head on an all breeze to move about the work area. wood handle. The only steel is the “forged in” point at the very tip. LOG PV036 - 36” grips 8” to 32” logs • 8 lbs. Light weight & strong! Pickaroon head detail LOG PV042 - 42” grips 8” to 32” logs • 8 lbs. PEA T-000-015-0656 - 15” handle • 2 lbs. LOG PV048 - 48” grips 8” to 32” logs • 9 lbs. PEA T-000-060-0668 - 60” handle • 3 lbs. LOG PV060 - 60” grips 10” to 36” logs • 10 lbs.

6 LB. MAUL Maul head HOOKAROON Wood with leather detail Heat treated, zinc plated steel tip, rubber grips cover. 33” handle. - 24” • 3 lbs. LOG HR024 PEA R-157-036-MAUL • 8 lbs. LOG HR030 - 30” • 3.5 lbs. LOG HR036- 36” • 4.5 lbs.

LOG CARRIER (Patent pending) The log carrier is lightweight and strong. The 54 in. handle gives each person plenty LIFTING HOOK of leverage. Solid high carbon steel forged hook. Thermoplastic LOG LC054 - Log Carrier • 10 lbs. rubber grip; classic design for forestry applications, built to last, angled handle for better MILL SPECIAL control. CANT HOOKS BAH 1204 OAL 9 ½” 1 lb. Smaller diameter handle. No rubber grip. Hand slides easily. LOG MS024 - 24” • 8 lbs. STEEL LIFTING TONGS LOG MS030 - 30” • 8 lbs. 8” - 11” capacity solid high carbon steel forged LOG MS036 - 36” • 8 lbs. hooks. Thermoplastic rubber grip & scissor action spreading gear; classic lift-to-close EXTREME DUTY TOOLS design for forestry applications, built to last with For those extra large logs and poles! Reinforced aluminum handles forged steel rivets, angled comfort grip handle and extra large hooks. Yellow color only to differentiate Extreme Duty. for better control. LOG XCH060 - 60” Cant Hook, grips 10” - 36” logs BAH 1401 8” length • 2 lbs. LOG P060 - 60” Peavey, grips 10” - 36” logs BAH 1423 11” length • 2.1 lbs. LOG MH078 - 78” MegaHook (pictured), grips 15” - 45” logs BREAKING BAR 15” GENERAL 21” length, all steel body. PURPOSE Thermoplastic grip for sure BAH HGPS-0.8-380 • 2 lbs. handling. Hammer heel. Use UNIVERSAL LOG STAND with felling wedges. 6” Universal log stand - shown BAH 1002 21” L • 2.2 lbs. attached to the LOG PV060 60” peavey LOG ULS006 • 1 lb. GENERAL PURPOSE 26” axe, for camping, gardening & occasional trimming / splitting. TRAIL BOSS Steel curved head, ash handle. Light & compact enough to carry all day in your hand BAH HUS-1.0-650 • 3 lbs. or strapped to your pack. European style head w/ 4” blade & 4 1/2” cutting edge. Stout straight-grained hickory handle. 23” OAL. CLD 90TA • 2.6 lbs.

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 64 www.oescoinc.com email: [email protected] PERSONAL PROTECTION / ACCESSORIES DINOWOOD FIREWOOD BAGS Rugged nylon bags, open weave for optimum drying. Fill from conveyor or just toss in. Holds 1/3 cord each, randomly fi lled. Will free stand on a pallet when full. Great for the person with a wood processor, or for moving fi rewood around when minimum handling is a must. Filling frame or forks required for effi cient use. 36”x42”x58” • 2500 lbs. max. capacity. DIN BB-DINOWOOD • 1 lb. LABONVILLE CHAPS US made, maximum safety. Regular or Full Calf (wraps around calf) ECHO MAX PERFORMANCE™ BAR & CHAIN OIL REGULAR: FULL CALF: & POWER BLEND OIL LAB 850KPR 32” LAB W850KPR 32” LAB 850KPL 36” LAB W850KPL 36” BAR & CHAIN OIL - 1 quart LAB 850KPX 40” LAB W850KPX 40” ECH 6459012 ECH 6459006 - 1 gallon POWER BLEND® OIL LABONVILLE HELMET ECH 6450001 - 2.6 fl .oz. Pre-assembled. Great value, superb ECH 6450025 - 6.4 fl . oz. comfort, knob adjusted 6-point ECH 6450250 - 5 gallons suspension. LAB 570H • 2 lbs. OREGON BARS & SAW CHAINS OESCO carries OREGON KEEPER WINCH STRAP products for ECHO chain Tree saver strap, 2” wide 6’ long, 8000 lb. . Oregon products for Minimize damage to anchor trees when using other brands are available your snatch block. upon request. Call Us! ORC 02952 OESCO carries parts & accessories for most SELF-RELEASING SNATCH BLOCK ECHO WRC IGFRSB - 6”, 6 ton capacity • 14 lbs. MULTI-PURPOSE DOUBLE TAPER WEDGE WRC WB512 5 ½” - Plastic Wedge WRC WB10 10” - Plastic Wedge WRC WB8 8” - Plastic Wedge

HEADBAND KATANABOY Made in Japan. Double napped terry. Machine wash. Reversible. 2-handed, professional, heavy-duty folding saw w/ 19-4/5” blade. Navy. OCC 88501 Competes with a ! Largest folding saw on the market today. Long, well-balanced, taper-ground blade & impulse-hardened, SWEATBAND non-set tooth design gives extended working reach, faster cutting, Installs quickly! Bend over hard hat suspension. and easily handles large limbs & trunks. Non-slip, rubberized 8mm, excellent absorbency. Navy. OCC 88001 cushioned handle. Sturdy nylon shoulder bag w/ Velcro fastening & pocket for replacement blades, included. • 2.1 lbs. SIL 403-50 Holds a chain saw fi le & wrench HEAVY DUTY FACE PROTECTION WEA 08-97230 Ratchet adjustment, sweatband, swivel locks. Browguard permits mounting of poly- TOOL HOLSTERS Slip on your belt. Two carbonate clear shield or steel mesh forestry styles. Polypropylene Holds a wedge, screen. Order HG-25 plus shield. webbing. 11 1/2” long. wrench & 2 chain ELV HG-25 - Face Headgear • .5 lb. saw fi les. 3” belt ELV FS-16PC - Polycarbonate Shield • .5 lb. loop. ELV SV-75 - Forestry Screen - Steel • .25 lb. WEA 08-97231

GLOVES GALORE! Pages 108 & 109 KEVLAR® LINED VIBRATION REDUCING CHAIN SAW GLOVES 2 layers of Kevlar on back resist cuts; foam pads on palms reduce vibration; goat skin leather provides fi rm grip. Reinforced fi ngertips & knuckles. Velcro wrist closure keeps sawdust out of gloves. ECH 99988801600 • Medium ECH 99988801601 • Large ECH 99988801602 • XLarge ECH 99988801603 • XXLarge

OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431 since 1954 www.oescoinc.com email: [email protected] 65 5YEARS