the power to CONTROL MOTHER NATURE 2012 quest Equipment Catalog

quest Rugged • High Performance • Reliable

Air Movers HEPA Air Scrubbers Portable Air Conditioners Portable Electric Heaters Ground Thaw Systems the power to

Equipment for the Construction Professional

| 2012 quest Rugged • High Performance • Reliable Equipment Catalog

Quest Climate Control Equipment Quest Climate Control Equipment, a division of Therma-Stor, LLC, is manufactured in Madison, WI, USA. Quest offers a complete line of rugged, high performing, climate control equipment designed and engineered for the construction, concrete and painting professional.

Offering years of expertise in dehumidification, drying and heat, Quest provides a premium line of portable climate control equipment to the construction industry including dehumidifiers, portable and large desiccant dehumidifiers, air movers, HEPA air scrubbers, electric spot heating and spot cooling. And, with the addition of its revolutionary customized modular hydronic heating systems, Quest now has the perfect solution for ground thaw, concrete curing, frost prevention, temporary and emergency heat applications as well.

Quest Climate Cotrol Equipment Provides: • Durable, high performing, energy efficient equipment made in the USA • Years of expertise on correct equipment choice and set-up for any construction application • 24/7/365 personalized signature service and support

Control Mother Nature Year Round with Quest.

.

TABLE OF CONTENTS Quest Refrigerant Dehumidifiers Page 1 Quest Air Movers Page 1 Quest HEPA Air Scrubbers Page 2 Quest Spot Electric Heaters Page 3 Quest Spot Coolers and Desiccant Dehumidifiers Page 4 Quest Large Desiccant Dehumidifiers Page 5 Quest Ground Thaw and Temporary Heat (Hydronics) Page 6-9 Quest Hydronic Accessories Page 10 Quest CHH-980 Page 11 Quest On The Job Page 12 Quest Financing Information Page 13

Stay On Schedule and On Budget the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Refrigerant Dehumidifiers Speed up many construction applications Hardwood Flooring/Cabinet Installation Control the during installation to prevent damage Concrete Drying Allows for finished floors to be installed in less time Provides rapid water removal for broken or leaky pipes Painting Make deadlines – apply additional coats of paint in a shorter time frame Drywall Joint compound can dry in hours instead of days Construction materials contain excess moisture. Quest refrigerant dehumidifiers control the construction environment. Quest PowerDry 1300 4032360 Water removal at Saturation (90ºF/90RH) 16 Gallons Water removal at AHAM (80ºF/60RH) 8 Gallons ACCESSORIES PART NO. Lay Flat 10” x 250’ 4029252 1300 Filter MERV 7 4025568 1300 Filter MERV 11 4026315 Quest Dry RDS 10 4029630 PowerDry 1300 Water removal at Saturation (90ºF/90RH) 20 Gallons Water removal at AHAM (80ºF/60RH) 10 Gallons ACCESSORIES PART NO. Lay Flat Duct 10” x 250’ 4029252 RDS 10 Filter MERV 11 4025568 RDS 10 Filter MERV 7 4026315 Flex Duct 12” x 25’ 4024750 RDS 10 Quest PowerDry 4000 Pro 4031120 Water removal at Saturation (90ºF/90RH) 38 Gallons Water removal at AHAM (80ºF/60RH) 22 Gallons ACCESSORIES PART NO. Lay Flat Duct 10” x 250’ 4029252 Flex Duct 12” x 25’ 4024750 RDS 22 Filter MERV 11 4021475 PowerDry RDS 22 Filter MERV 8 4024969 4000 Pro Air Movers Perfect compliment to dehumidification Quest Air Movers produce maximum airflow and circulation while using less than 3 amps of electricity, allowing more power for other equipment on the job site. Quest recommends 2 air movers for each to speed up evapo- rative processes and allow the dehumidifier to operate more effectively. The C1000 Plus and A3000 Plus Air Movers are equipped with a convenient onboard GFCI outlet and circuit breaker and can be “daisy chained” (up to 4 fans on one circuit). Quest Power Air Mover C1000 4028149 Quest Power Air Mover C1000 Plus 4028322 Amps 2.4(low); 2.8(high) GFCI outlet and circuit breaker C10+ only A3000 A3000 Plus Quest Power Air Mover A3000 4028330 C1000 Quest Power Air Mover A3000 Plus 4025498 C1000 Plus Amps 1.9(low); 2.5(high) 2700 FPM GFCI outlet and circuit breaker A30+ only ACCESSORIES PART NO. Air Mover Stand (available for A30 and A30+) 4029495 3000 CFM | Page 1 2012 quest Rugged • High Performance • Reliable Equipment Catalog

HEPA Air Filtration System Removes 99.97% of airborne particles Recent legislation requires HEPA air scrubbers for asbestos removal and HEPA filtration during lead abatement on ALL structures built before 1978. Helps control airborne lead levels during common construction activities such as hand or power sanding and interior demolition. The PowerHEPA 500 is is the most compact, portable True HEPA air scrubber on the market. Its energy- efficient rotomold plastic design is durable, lightweight and stackable, making it the ultimate in both portability and performance. With its optional 4-stage absorption filter, the PowerHEPA 1400 Pro even removes airborne odors and chemicals. The Quest Pow- erHEPA 1400 Pro will perform one air change of a 12 x 14 foot room in less than a minute. At the recommended four , a single Quest PowerClean 1400 Pro can effectively control up to 21,000 cubic feet. This unit is dual speed and can be ducted for positive and negative pressure applications. Quest HEPA Air Scrubbers can also be effectively used for the following applications: Hospital construction and renovation Dust containment Mold/Mildew remediation Odor mitigation

Quest PowerHEPA 500 4031360 Airflow 500 CFM Air Filtration System HEPA Power Draw 1.9 Amps/ll0VAC ACCESSORIES PART NO. , Pleated, 1” x 18” x 18” 4031877 Air Filter, HEPA, 2.5” x 18” x 18” 4031864 Air Filter, Optional Carbon/Potassium PowerHEPA 500 Permanganate 4031878 Lay Flat Duct 10” round x 250’ 4029252 Flex Duct 16” round x 25’ 4028357

Quest PowerHEPA 1400 Pro 4028220 2-Speed Operation Airflow 1400/900 CFM Air Filtration System HEPA Power Draw 12 Amps/ll0VAC ACCESSORIES PART NO. Lay Flat Duct 10” Round x 250’ 4029252 Lay Flat Duct 14” Round x 250’ 4029254 AFS 14 HEPA Filter 4029502 AFS 14 Spun Polyester Pre-Filter 4029503 AFS 14 Polyester/Cotton Pre-Filter 4029504 AFS 14 Carbon/Potassium Filter, 7.5 lbs 4029516 AFS 14 Reusable Carbon Filter Frame 4029517 Carbon/Potassium Blend, 5 Gallon Bucket 4029518 The HEPA filtration system Flex Duct 18”x25’ 4029522 removes virtually all removable Flex Duct 12”x25’ 4029521 airborne particles. PowerHEPA 1400 Pro

Stay On Schedule and On Budget Page 2 the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Spot ETL Certified, UL Listed, NEC Compliant The Quest Power Electric Heat EHS 31 Pro Portable Electric Heater provides two power options – 30 Amps/18,000 BTUs and with the flip of a switch the 50 Amp setting provides 31,000 BTUs. The Power Electric Heat EHS 62 Pro adds flexibility with the same 220V 50/30 Amp settings and six additional 110V standard house circuit connections at 5,000 BTUs each, bringing its total power capacity to 62,000 BTUs of instant heat. And when no 220 power is available, the six 110 circuits can be used independently. For small areas or complimentary heat, the Power Electric Heat EHS 20 Pro is the unit for you. It provides 20,000 BTUs with four 110V connections. Like the EHS 62, no 220 power is no problem. All Quest Electric Heaters are ETL Certified, UL Listed and NEC Compliant for the ultimate in jobsite safety.

Quest Power Electric Heat EHS 20 Pro 4033330 Power 120VAC – 12 Amps Maximum Airflow 190 CFM Maximum Heat (80ºF Temp Rise) 20,000 BTUs ACCESSORIES PART NO. COMING SOON 9” x 11 3/8” x 3/4” Mini Pleated MERV-11 4030671 9” x 11 3/8” x 3/4” Standard Pleated Media Power Electric MERV-8 4029748 Heat EHS 20 Pro Quest Power Electric Heat EHS 31 Pro 4030220 Power 220V – 30 or 50 Amps Maximum Airflow 360 CFM Maximum Heat (80ºF Temp Rise) 31,000 BTUs ACCESSORIES PART NO. 12” x 25’ Intake Flex Duct 4024750 16” x 20” x 2” MERV-8 4024969 16” x 20” x 2” Standard MERV-11 4021475 16” x 20” x 2” Optional MERV-14 4022164 25’ Cord Kit 4027326 Quest Power Electric Heat EHS 62 Pro 4030490 Power 220V – 30 or 50 Amps Plus up to six 110 Circuits Maximum Airflow 750 CFM Maximum Heat (80ºF Temp Rise) 62,000 BTUs Power Electric Heat ACCESSORIES PART NO. EHS 31 Pro 12” x 25’ Intake Flex Duct 4024750 16” x 20” x 2” MERV-8 4024969 16” x 20” x 2” Standard MERV-11 4021475 25’ high voltage Cord Kit 4027326 Kit 4027327

Power Electric Heat EHS 62 Pro

| Page 3 2012 quest Rugged • High Performance • Reliable Equipment Catalog

Spot Cooling Gives vital temperature control on the job site Quest PowerCool 12 Pro provides one ton of cooling capacity. The PowerCool 12 Pro can operate both inside and outside of the space to be cooled. With its powerful 430 CFM of cooling airflow, layflat duct can be used to distribute cool air up to 100 feet from the PowerCool 12 Pro, making it easy to reach previously inaccessible areas. This powerful one ton unit will cool approximately 500-750 sq. ft. (depending on ceiling height, outside weather and climate conditions on the job site).

Quest PowerCool 12 Pro 4028850 Water removal (95ºF/60RH) 12.5 Gallons Power Draw 11.7 Amps/110VAC Cooling Airflow 430 CFM Exhaust Airflow 430 CFM Cooling Capacity One Ton 12,000BTUs ACCESSORIES PART NO. Lay Flat Duct 10” Round x 250’ 4029252 Lay Flat Duct 14” Round x 250’ 4029254 Flex Duct 10”x25’ 4029520 Flex Duct Insulated 10”x25’ 4029524

PowerCool 12 Pro

Desiccant Dehumidifiers When very low humidity levels are needed Dry in cold and damp conditions (as low as -10ºF) Dry when maximum dew point depression is needed Dry concrete floors rapidly to allow additional flooring to be applied Quest Portable Desiccants do not require a generator, can operate in smaller spaces and are ideal for temporary drying.

Quest PowerDry 385D Pro 4029110 Water removal at AHAM (80ºF/60RH) 14.4 Gallons Process Airflow 385 CFM React Airflow 75 CFM Power - single phase 110VAC ACCESSORIES PART NO. ACS 12 and DDS 15 Filter MERV 11 4029501 Flex Duct 12”x25’ 4029521 Lay Flat Duct 10” Round x 250’ 4029252 Flex Duct 6”x25’ 4029519 PowerDry Quest PowerDry 1200D Pro 4028200 385D Pro Water removal at AHAM (80ºF/60RH) 43 Gallons Process Airflow 900 CFM React Airflow 300 CFM Power - single phase 220VAC ACCESSORIES PART NO. Flex Duct 12”x25’ 4029521 PowerDry Lay Flat Duct 10” Round x 250’ 4029252 1200D Pro

Stay On Schedule and On Budget Page 4 the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Large Desiccant Dehumidifiers When maximum dewpoint depression is needed Dry in cold and damp conditions (as low as -10ºF) Dry when maximum dew point depression is needed Dry concrete floors rapidly to allow additional flooring to be applied Perfect for tank lining and industrial coating projects Can be used on any large drying project The Quest PowerDry 1800D Pro and 4800D Pro have been developed in response to the industry’s need for a rugged, efficient, user-friendly desiccant dehumidifier. The 1800 CFM trailer mounted PowerDry 1800D Pro is propane fired and requires a single 120-volt, 20-amp circuit for operation. The unit is easily transported and provides an excellent solution for projects in remote loca- tions where electrical power is scarce. The PowerDry 4800D Pro is equipped with a circuit breakers, eliminating down time caused by blown fuses. Weighing just 1600 lbs., and mounted on a narrow 48” skid, this unit is much easier to transport than many units of similar capacity. Requiring only 102 amps, this 4800CFM desiccant consumes less energy than competing designs. Quest PowerDry 1800D Pro 4028201 120 Gallon Dot Propane Tank Water removal at AHAM (80ºF/60RH) 125 Gallons PowerDry 1800D Pro Process Airflow 1800 CFM Desiccant React Airflow 400 CFM and Trailer Power - single phase 115VAC ACCESSORIES PART NO. Flex Duct 12”x25’ 4029521 Lay Flat Duct 10” Round x 250’ 4029252 Lay Flat Duct 14” Round x 250’ 4029254 Lay Flat Duct 16” Round x 250’ 4029255

1800D Pro System Includes: 1800 CFM desiccant 16’ tandem axle V-nose trailer Hose 120 gallon DOT propane cylinder Reel

Quest PowerDry 4800D Pro – Electric 4028203 (with Frame) 4029193 (without Frame) Quest PowerDry 4800D Pro – Propane 4028204 (with Frame) 4029194 (without Frame) Water removal at AHAM (80ºF/60RH) 379 Gallons Process Airflow 4800 CFM React Airflow 2000 CFM Power - three phase 480VAC ACCESSORIES PART NO. PowerDry 4800D Pro P Flex Duct 18”x25’ 4029522 without frame Lay Flat Duct 18” Round x 250’ 4029256 Lay Flat Duct 20” Round x 250’ 4029257 Flex Duct 20”x25’ 4029523

PowerDry 4800D Pro E with frame PowerDry 4800D Pro P with frame PowerDry 4800D Pro E without frame

| Page 5 2012 quest Rugged • High Performance • Reliable Equipment Catalog

Hydronic Modular Systems Flexible, Modular – Thaw, Cure, Heat The Quest Hydronic System is modular, making it the most flexible, efficient system on the market today. Purchase only the components of the system that are needed based on configuration and job applications. Quest gives you the option to stock more heating modules than hose reels if demand for temporary and emergency heat is greater. With Quest, you can order the full system mounted on a skid, or start by just purchasing the components you need, and add equipment as job opportunities increase.

quest

Spot Cooling

Overall System Advantages: Fully CSA/UL Certified 308K Diesel, Propane or Natural Gas Heat Module High quality burner – easy, clean, cold-weather start-up every time 1 HP, stainless steel centrifugal pump Stainless steel combustion chamber, no rust from condensation 24/7/365 technical support Modular system for the best overall utilization Only 20 gallons of glycol – faster heat-up and more efficient utilization of BTUs Open system – no need for a pressurized permit Fully NEMA certified electrical package Stainless steel body is corrosion resistant Modular system allows for excellent service access System uses 110VAC, 20 Amp–can be split into two 15 Amp circuits

Stay On Schedule and On Budget Page 6 the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Hydronic Heating – Modular Purchase components as you need them

Reel House Not Pictured: Can be used to hold the hose quest reel or coils for temporary/emergency heat Generator 308,000 BTU Diesel, 3,000 ft. Hose Reel - Optional 7KW generator Propane or Natural Gas 6 - 500’ lengths Heat Module Optional 3000 ft hose reel for Additional fuel burner ground thaw/concrete curing Trailer modules can be purchased Optional trailer comes in to make the system tri-fuel aluminum, painted steel or enclosed

Optional Fuel Tank with diesel configuration Fan Coils 80K and 200K units for temporary/emergency heat

Optional Skid Frame Pallet Allows you to mount everything to a trailer or fork it on/off a truck Quest Hydronic Optional Containment Pan Heat Module

Hydronic Heat Exchangers A Safer Heat Source on the Job Site Unlike direct-fired heaters, theQuest PowerHeat HFC 80 Pro and HFC 200 Pro Hydronic Heat Exchangers completely isolate the heat source from combustion by-products for a safer heat source on the job site eliminating the need for outside air ventilation, and saving money on fuel costs. The Quest PowerHeat HFC 80 and HFC 200 meets stringent OSHA air quality standards and address Health, Safety and Welfare issues for construction job sites. Quest PowerHeat HFC 80 Pro 4029410 Heat Capacity 80,000BTUs Airflow 950 CFM Power 1.8 Full Load Amps Power - single phase 120VAC, Grounded ACCESSORIES PART NO. Ductable Filter Box Kit 4029876 16” x 16” x 2” MERV 8 4021799 16” X 25” Heavy Duty Flex Duct 4029252 PowerHeat 14” X 250’ Lay-Flat Duct 4029254 HFC 80 Pro Quest PowerHeat HFC 200 Pro 4029425 Heat Capacity 200,000BTUs Airflow 2300 CFM Power 5.7 Full Load Amps Power - single phase 120VAC, Grounded ACCESSORIES PART NO. Ductable Filter Box Kit 4029875 16” x 20” x 2” MERV 8 4024969 PowerHeat 16” X 25” Heavy Duty Flex Duct 4029252 HFC 200 Pro 14” X 250’ Lay-Flat Duct 4029254 | Page 7 2012 quest Rugged • High Performance • Reliable Equipment Catalog

Hydronic Heat Systems Flexible, Modular – Thaw, Cure, Heat The CSA/UL certified Quest PowerHeat CHH300 Central Hydronic Heater is designed to operate on multiple fuel sources. The burner utilizes proprietary technology to ensure smooth, clean, cold-weather ignition and steady burn efficiency. Quest PowerHeat CHH300s are tri-fuel and a burner change is all that is required to convert from one fuel type to the other. All exposed compo- nents on PowerHeat CHH300s are made of non-corrosive stainless steel and aluminum - no expensive refurbishment required. Unlike competitive units, the Quest combustion chamber is 100% stainless steel, making it corrosion-free as well, even when running in low temp applications such as concrete curing.

The PowerHeat CHH300 incorporates an open, atmospherically-vented , which not only makes it safer to operate, but effectively eliminates the system from Pressure Vessel classification - there is no need for a pressurized boiler permit. The Quest CHH300 system uses only 20 gallons of glycol. As a result, the unit will heat up faster, with less energy, and better utilize its powerful 308,000 BTUs. The 1HP stainless steel centrifugal pump is contaminant-free, keeping the glycol clean and safe to use on every job. Control Mother Nature even in the harshest of elements with the only fully NEMA rated electrical package included on every Quest Central Hydronic Heater.

For easy diagnostics, all PowerHeat CHH300 gauges and indicators are clearly visible even when the unit is securely locked down. In addition to the standard temperature, pressure, fuel level, and fluid (HTF) level gauges, the PowerHeat CHH300 control system includes a sequence of status indicator lights which provide a quick function check and easy trouble- shooting. Finally the lifting hook on the PowerHeat CHH300 and Quest Heat Exchangers allow the ultimate in flexibility in placing equipment on the job site. Powerful 308K Diesel/Propane/Natural Gas Heating Module Modular Design 24/7/365 Technical Support Stainless Steel & Aluminum Construction

Quest PowerHeat CHH300 – Diesel Burner with fuel tank 4031110 Diesel Burner only also available Propane Burner 4031310 Natural Gas Burner 4031510 Fuel Input 308,000 BTU/hr Fuel Options Diesel/Natural Gas/Propane Heat Transfer Fluid Propylene Glycol Quest Stainless Steel Pump 1HP Fuel Tank Lifting Hook 1 Fuel Consumption at Full Load 2.4 Gallons/hr (diesel)

Quest 120 Gallon Diesel Fuel Tank 4030262 Propane Burner Module 4030647 Natural Gas Burner Module 4030646

Stay On Schedule and On Budget Page 8 the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Hydronic Heat Systems Flexible, Modular – Thaw, Cure, Heat Quest Ground Thaw 4032645 Skid Mount Ground Thaw 4032650 System Includes: System Includes:

1 – PowerHeat CHH300 Diesel Central Heater 1 – PowerHeat CHH300 Diesel Central Heater (Available in Natural Gas & Propane) (Available in Natural Gas & Propane) 1 – Hose Reel with 3000’ of Hose 1 – Hose Reel with 3000’ of Hose (6 – 500ft. lengths) (6 – 500ft. lengths) 2 – 1” x 50’ Supply/Return Hoses with quick 1 – Reel House connects 2 – 1” x 50’ Supply/Return Hoses with quick 1 – 1” x 3/4” 6 Port Manifold connects Ground Thaw System Advantages: 1 – 1” x 3/4” 6 Port Manifold 1 – Skid Mount Package 500ft. hose loops for even heat distribution Remote manifold can be placed up to 300 Both Thaw Systems Expandable feet from heating module for Temporary Heat BTUs fully optimize to hose length * Optional 7kW Generator Hose reels have an additional – not included with System 1500ft. capacity

Quest Temporary Heat 4032635 Skid Mount Temporary Heat 4032640 System Includes: System Includes:

1 – PowerHeat CHH300 Diesel Central Heater 1 – PowerHeat CHH300 Diesel Central Heater (Available in Natural Gas & Propane) (Available in Natural Gas & Propane) 4 – HFC 80 Pro Heat Exchangers * 4 – HFC 80 Pro Heat Exchangers 2 – 1” x 50’ Supply/Return Hoses with quick 1 – Reel House with Floor connects 2 – 1” x 50’ Supply/Return Hoses with quick 8 – 3/4” x 50’ Hoses with quick connects connects 1 – 4 Port Manifold 8 – 3/4” x 50’ Hoses with quick connects * Can be configured with 2 HFC 200 Pro Heat Exchangers 1 – 4 Port Manifold 1 – Skid Mount Package Temp Heat System Advantages: Lifting hook on heat module can be Both Heat Systems Expandable lifted separately adding flexibility for Ground Thaw Quest components are sold separately and Heat Exchangers can be ducted up to systems can be easily customized to create pack 100 feet with layflat ducting ages for an almost unlimited variety of job Tri-Fuel (available in diesel, propane applications. or natural gas) | Page 9 2012 quest Rugged • High Performance • Reliable Equipment Catalog

Hydronic Accessories Flexible, Modular – Thaw, Cure, Heat

Quest Heat Hose Reels Hose Reel w/3000’ of 5/8” hose 4030599 Comes equipped with 3000 ft. of fully charged 5/8” hose in six 500 ft. loops. Can hold an additional 1000 ft. of hose, for a total capacity of 4000 ft.

Hose Reel w/4000’ of 5/8” hose 4033405 Hose Comes equipped with 4000 ft. of fully charged 5/8” hose in eight 500 ft. loops. Reel Quest Heat Hose Reels are CSA/UL Certified

Quest Heat Manifolds 3 Port Manifold 1” x 1” 4030395 3 Port Manifold 1” x 3/4” 4030206 4 Port Manifold 1” x 3/4” 4030700 6 Port Manifold 1” x 3/4” 4030570

Quest 3/4” x 50’ Hose 4030153 Quest 1” x 50’ Hose 4030154 3/4” - Use with HFC 80 Pro 1” - Main supply and return hoses as well as for use with HFC 200 Hydronic Heat Exchangers

Optional 7kW Generator 4030966

1” Tee Set 4030209

Pre-Mixed Glycol, 5 Gallons 4030368

Containment Tray 4030720

Containment Tray Skid Package 4030710

Accessories Not Pictured: Skid Package Hose Assembly 500’ x 5/8” 4030402 Insulated Hose Blanket 3’ x 25’ 4030396

Stay On Schedule and On Budget Page 10 the power to 2012 Equipment CONTROL MOTHER NATURE Catalog quest

Central Hydronic Heater Powerful 980K Multi-Fuel Heating Module HEAT up to an amazing 1,400,000 cubic feet, THAW or prevent frost up to 18,000 sq. ft., CURE up to 27,000 sq. ft. with one Quest PowerHeat CHH980 Central Hydronic Heater.

Like the CHH300, the Quest PowerHeat CHH980 is CSA/UL certified and designed to operate on multiple fuel sources. The burner utilizes proprietary technology to ensure smooth, clean, cold-weather ignition and steady burn efficiency. Quest PowerHeat CHH980s are tri-fuel and a burner change is all that is required to convert from one fuel type to the other. All exposed compo- nents on PowerHeat CHH980s are made of non-corrosive stainless steel and aluminum - no expensive refurbishment required. Unlike competitive units, the Quest combustion chamber is 100% stainless steel, making it corrosion-free as well, even when running in low temp applications such as concrete curing.

The PowerHeat CHH980 incorporates an open, atmospherically-vented expansion tank, which not only makes it safer to operate, but effectively eliminates the system from Pressure Vessel classification - there is no need for a pressurized boiler permit. The Quest CHH980 system uses only 120 gallons of glycol. As a result, the unit will heat up faster, with less energy, and better utilize its powerful 980,000 BTUs. The 2 1-1/2HP stainless steel centrifugal pumps are contaminant-free, keeping the glycol clean and safe to use on every job. Control Mother Nature even in the harshest of elements with the only fully NEMA rated electrical pack- age included on every Quest Central Hydronic Heater.

For easy diagnostics, all PowerHeat CHH980 gauges and indicators are clearly visible even when the unit is securely locked down. In addition to the standard temperature, pressure, fuel level, and heat transfer fluid (HTF) level gauges, the PowerHeat CHH980 control system includes a sequence of status indicator lights which provide a quick function check and easy trouble- shooting. Finally, again like the CHH300, the lifting hook on the PowerHeat CHH980 and Quest Heat Exchangers allow the ultimate in flexibility in placing equipment on the job site. Powerful 980K Diesel/Propane/Natural Gas Heating Module Modular Design 24/7/365 Technical Support Stainless Steel & Aluminum Construction

Quest PowerHeat CHH 980 Pro – Diesel 4033030 Nat Gas or Propane 4033010 Fuel Input 980,000 BTU/hr Fuel Options Diesel/Natural Gas/Propane Heat Transfer Fluid Propylene Glycol Stainless Steel Pump 2 - 1 1/2 HP Lifting Hook 1 Fuel Consumption at Full Load 7.07 Gallons/hr (diesel)

Call for Accessory and Heat Package Information

| Page 11 quest Rugged • High Performance • Reliable

Stay On Schedule and On Budget Page 12 the power to quest CONTROL MOTHER NATURE FINANCEquest – Powered by Custom Financing That Fits Your Needs 3 Skip Payments 3 Dated Invoicing 3 Below Market Financing Rates 3 $5,000 Minimum Purchase Required 3 Ground Thaw Packages as low as $679.72 per month

Quest Climate Control Equipment will give you “The Power to CONTROL MOTHER NATURE.”

Enhance your service offering and generate new, diversified profits today!

Application knowledge is just a phone call away.

Air Movers • Durable, high performing, Dehumidifiers energy efficient equipment made in the USA HEPA Air Scrubbers Portable Air Conditioners • Years of expertise on correct equipment choices and set-up Portable Electric Heaters for any construction application Ground Thaw Systems • 24/7/365 personalized signature service and support 1.866.933.8476 www.QuestOnTheJob.com

For More Information Call Erin Hynum at Quest today| at 608-237-8471 Page 13 quest Rugged • High Performance • Reliable

quest

Quest offers the most complete line of rugged, high performance, climate control equipment for the construction, concrete painting, and finishing professional.

The History of Quest and Therma-Stor

Quest is manufactured by Therma-Stor, LLC of Madison, WI, which was established in 1977 to apply advanced heat transfer technologies to residential and commercial markets. The company also manufactures Santa Fe™ Free-Stand- ing Dehumidifiers, Ultra-Aire™ Whole House Ventilating Dehumidifiers, Therma-Stor® Heat Reclaim Water Heaters, HI-E Dry™ High Efficiency Dehumidifiers, and the Phoenix™ Restoration Equipment line of dehumidification and water extraction products.

Stay On Schedule and On Budget