59 1 1 ENGINE / RA D IATOR Core 20 ⁄4" × 22 ⁄2" × 2" Core 8" × 233⁄4" × 11⁄2" 1 Inlet Header  ⁄4" × 23" Inlet Header 25⁄8" × 233⁄4" 1 Outlet Header 3" × 22 ⁄2" Outlet Header 2" × 233⁄4" 1 Inlet 1 ⁄4" Inlet 11⁄2" 3 Outlet 1 ⁄4" Outlet 13⁄4" Rows 3 Rows 2 ...... 91040...... ea...... 369.95 ...... 91445...... ea...... 309.95

7 3 1 Core 201⁄4" × 221⁄2" × 2" Core 7 ⁄8" × 26 ⁄8" × 1 ⁄2" 1 Inlet Header 1⁄4" × 23" Inlet Header " × 27 ⁄4" 3 Outlet Header 3" × 221⁄2" Outlet Header 3" × 26 ⁄4" 1 Inlet 11⁄2" Inlet 1 ⁄2" 3 Outlet 13⁄4" Outlet 1 ⁄4" Rows 3 Rows 2 ...... 91050...... ea...... 349.95 ...... 91430...... ea...... 339.95

3 1 Core 201⁄4" × 221⁄2" × 2" Core 8" × 23 ⁄4" × 1 ⁄2" 5 3 Inlet Header 1⁄4" × 23" Inlet Header 2 ⁄8" × 23 ⁄4" 3 Outlet Header 3" × 221⁄2" Outlet Header 2" × 23 ⁄4" 1 Inlet 11⁄2" Inlet 1 ⁄2" 3 Outlet 13⁄4" Outlet 1 ⁄4" Rows 3 Rows 2 ...... 91070...... ea...... 369.95 ...... 91455...... ea...... 339.95

1 1 1 Core 20 ⁄8" × 23 ⁄4" × 1 ⁄2" Core 8" × 233⁄4" × 11⁄2" 3 1 Inlet Header 4 ⁄4" × 24 ⁄2" Inlet Header 25⁄8" × 233⁄4" Outlet Header 3" × 24" Outlet Header 2" × 233⁄4" 1 Inlet 1 ⁄2" Inlet 11⁄2" 3 Outlet 1 ⁄4" Outlet 13⁄4" Rows 2 Rows 2 ...... 91230...... ea...... 299.95 ...... 91750...... ea...... 319.95

Core 201⁄8" × 231⁄4" × 11⁄2" 1 5 1 Inlet Header 43⁄4" × 241⁄2" Core 8 ⁄4" × 18 ⁄8" × 1 ⁄4" Outlet Header 3" × 24" Inlet Header 25⁄8" × 181⁄2" 3 1 Inlet 11⁄2" Outlet Header  ⁄4" × 18 ⁄2" 1 Outlet 13⁄4" Inlet 1 ⁄2" Rows 2 Outlet 13⁄4" ...... 91240...... ea...... 306.95 Rows 2 ...... 92290...... ea...... 209.95 Core 77⁄8" × 263⁄8" × 11⁄2" Inlet Header " × 271⁄4" Core 91⁄4" × 261⁄4" × 2" Outlet Header " × 263⁄4" Inlet Header 3" × 263⁄4" Inlet 11⁄2" Outlet Header 3" × 263⁄4" Outlet 13⁄4" Inlet 2" Rows 2 Outlet 2" ...... 91450...... ea...... 319.95 Rows 3 ...... 91740...... ea...... 369.95

Radiators Radiators Continued Most radiators are available in X/C 4 cores. Call for price and availability. Year Truck Engine Notes Part # 1 3 NOTE: There is a $10.00 per order boxing fee for all radiators. ’61 - ’64 ⁄2 to 1 ton 6-cyl. 23 ⁄4" wide 91445 ’61 - ’64 1⁄ to 1 ton 8-cyl. 261⁄ " wide 91430 Year Truck Engine Notes Part # 2 2 ’61 - ’64 1⁄2 to 1 ton 8-cyl. 233⁄4" wide 91455 ’53 1⁄2 to 1 ton 8-cyl. 91040 ’65 1⁄2 to 3⁄4 ton 6-cyl. 91750 ’53 - ’56 1⁄2 to 1 ton 6-cyl. 91050 ’65 1⁄2 to 3⁄4 ton 6-cyl. 185⁄8" wide 92290 ’54 - ’56 1⁄2 to 1 ton 8-cyl. 91070 ’65 1⁄2 to 3⁄4 ton 8-cyl. 91740 ’57 - ’60 1⁄2 to 1 ton 6-cyl. 91230 Here’s what our customers are saying about us... ’57 - ’60 1⁄2 to 2 ton 8-cyl. 91240

’61 - ’64 1⁄2 to 1 ton 6-cyl. 261⁄2" wide 91450 “Best service in automotive parts, period!” – Baldomero E.

www.autokrafters.com 60 3 1 Core 8" × 23 ⁄4" × 1 ⁄4" Core 91⁄4" × 261⁄4" × 2" 5 3 Inlet Header 2 ⁄8" × 23 ⁄4" Inlet Header 3" × 263⁄4" 5 3 Outlet Header 2 ⁄8" × 23 ⁄4" Outlet Header 3" × 263⁄4" Inlet 11⁄2" Inlet 2" Outlet 13⁄4" Outlet 2" Rows 2 Rows 3 ...... 91840...... ea...... 199.95 ...... 92155...... ea...... 314.95

Core 91⁄4" × 261⁄4" × 2" Core 91⁄4" × 261⁄4" × 2" Inlet Header 3" × 263⁄4" Inlet Header 3" × 263⁄4" Outlet Header 3" × 263⁄4" Outlet Header 3" × 263⁄4" Inlet 11⁄ " Inlet 2" 2 Outlet 13⁄ " Outlet 2" 4 Rows 2 Rows 3 ...... 92153...... ea...... 288.95 ...... 91880...... ea...... 399.95

Core 8" × 233⁄4" × 11⁄4" 1 Core 9" × 26 ⁄4" × 2" 5 3 ENGINE / RA D IATOR Inlet Header 2 ⁄8" × 23 ⁄4" Inlet Header 3" × 263⁄4" Outlet Header 2" × 233⁄4" Outlet Header 3" × 263⁄4" Inlet 11⁄2" Inlet 2" Outlet 13⁄4" Outlet 2" Rows 2 Rows 3 ...... 92465...... ea...... 209.95 ...... 91910...... ea...... 314.95

Core 91⁄4" × 261⁄4" × 2" Core 8" × 233⁄4" × 11⁄4" Inlet Header 3" × 263⁄4" Inlet Header 25⁄8" × 233⁄4" Outlet Header 3" × 263⁄4" Outlet Header 2" × 233⁄4" Inlet 11⁄2" Inlet 11⁄2" Outlet 13⁄4" Outlet 13⁄ " 4 Rows 2 Rows 2 ...... 92125...... ea...... 388.95 ...... 92154...... ea...... 199.95 Core 91⁄4" × 261⁄4" × 2" 3 1 Core 8" × 23 ⁄4" × 1 ⁄2" Inlet Header 3" × 263⁄4" 5 3 Inlet Header 2 ⁄8" × 23 ⁄4" Outlet Header 3" × 263⁄4" 3 Outlet Header 2" × 23 ⁄4" Inlet 11⁄2" 1 Inlet 1 ⁄2" Outlet 13⁄4" Outlet 13⁄4" Rows 2 Rows 2 ...... 92285...... ea...... 209.95 ...... 92152...... ea...... 209.95 Core 91⁄4" × 261⁄4" × 2" Inlet Header 3" × 263⁄4" Core 73⁄8" × 197⁄8" × 11⁄4" Outlet Header 3" × 263⁄4" Inlet Header 31⁄4" × 201⁄2" Inlet 13⁄4" Outlet Header 5⁄ " × 197⁄ " 8 8 Outlet 2" Inlet 11⁄ " 2 Rows 3 Outlet 2" ...... 92120...... ea...... 449.95 Rows 2

...... 92115...... ea...... 209.95 Core 241⁄4" × 261⁄4" × 2" Inlet Header 41⁄4" × 261⁄4" Outlet Header 3" × 263⁄4" Radiators Continued Inlet 2" Year Truck Engine Notes Part # Outlet 2" Rows 3 ’66 2WD 6-cyl. 233⁄4" wide 91840 ...... 92110...... ea...... 351.95 ’66 - ’67 2WD 8-cyl. 91880 ’66 - ’67 4WD 8-cyl. 3 core 91910 Radiators Continued ’66 - ’72 4WD 6-cyl. 2 core 92154 Year Truck Engine Notes Part # 1 ’67 - ’72 2WD 6-cyl. 233⁄4" wide; 2 core 92152 ’68 - ’72 2WD 302 26 ⁄4" wide; 2 core 92125 3 ’67 - ’72 2WD 6-cyl. 197⁄8" wide; 2 core 92115 ’68 - ’72 2WD 360, 390 23 ⁄4" wide; 2 core 92285 1 ’67 - ’72 4WD 1 ton 6-cyl. 263⁄4" wide; 3 core 92155 ’68 - ’72 2WD 360, 390 26 ⁄4" wide; 3 core 92120 1 ’68 - ’72 2WD 6-cyl. 261⁄4" wide; 2 core 92153 ’68 - ’72 2WD, 4WD 360, 390 26 ⁄4" wide; 3 core 92110 1 ’68 - ’72 2WD 302 233⁄4" wide; 2 core 92465 ’68 - ’72 4WD 360, 390 26 ⁄4" wide; 3 core 92140

ORDER TOLL FREE 1 - 800 - 228 - 7346 61 Radiator Caps ENGINE / RA D IATOR

Typical Radiator Hose Radiator Hoses

® Dayco hoses are designed to replace OEM hoses. Knitted reinforcement Motorcraft and all synthetic rubber construction gives high strength and resistance Zinc. 13 lbs. to heat and all recommended coolants. ’57 - ’72 ...... RS62...... ea...... 9.95 Upper Curved, 6-cylinder 223 CID ’57 - ’60 57 - ’58 F-Series – all; ’59 - ’60 – cut to fit. All with or without C8AZ-8100CHR C7AZ-8100Z A/C...... 70081...... ea...... 11.95 ’61 F-Series with or without A/C. Reproductions ...... 71013...... ea...... 14.95 ’53 F-Series 8-cylinder with LHD. ’62 - ’63 F-Series M/T or A/T, except F-350. 4 lbs...... 1T-8100A...... ea...... 7.95 ...... 71013...... ea...... 14.95 ’53 - ’56 F-Series with OHV. ’64 All...... 71013...... ea...... 14.95 4 lbs...... 1T-8100A...... ea...... 7.95 ’70 - ’72 F-100 / F-250 240 / 300. Autolite. Show quality. 13 lbs. 262 CID Chrome plated...... C8AZ-8100CHR...... ea...... 19.95 ’64 With or without A/T.. 71013...... ea...... 14.95 Zinc...... C7AZ-8100Z...... ea...... 19.95 240 / 300 CID ’65 M/T except F-350 – cut to fit; F-350 4-speed...... 71013...... ea...... 14.95 ’65 F-350 M/T with DRW or C/M with DRW. Pipe to radiator...... 70690...... ea...... 8.95 RS9 RR-29 ’66 F-350. With DRW...... 71013...... ea...... 14.95 Hexagonal Replacements ’68 4WD without A/C; ’53 F-Series “big six” LHD. F-Series without A/C except F-350. Regular type cap. 7 lbs...... 70369...... ea...... 11.95 ...... RS9...... ea...... 7.95 ’68 A/T except 4WD...... 71013...... ea...... 14.95 ’57 - ’65 F-Series. ’68 F-350 without A/C. Regular type cap. 7 lbs. With SRW...... 70369...... ea...... 11.95 ...... RS9...... ea...... 7.95 With DRW...... 71013...... ea...... 14.95 ’66 - ’72 F-Series. ’69 All to serial #E10,001. Aftermarket. 13 lbs.. RR-29...... ea...... 7.95 ...... 70442...... ea...... 8.95 ’69 Except F-350 without A/C...... 70369...... ea...... 11.95 ’69 F-350 with SRW. With A/C to serial #D40,001. 4338 43385 ...... 71013...... ea...... 14.95 Without A/C...... 70369...... ea...... 11.95 Chrome Aftermarket With DRW...... 71013...... ea...... 14.95 14 to 18 lbs. ’70 4WD M/T except F-350. ’53 - ’72 With closed system...... 70369...... ea...... 11.95 Hexagonal...... 4338...... ea...... 11.95 ’70 F-350 A/T without A/C, with DRW. ’53 - ’72 Round. Includes o-ring...... 71013...... ea...... 14.95 ...... 43385...... ea...... 19.95 ’70 F-350 300 M/T...... 71013...... ea...... 14.95 ’71 F-100 / F-250 240 4WD or Power Pak without A/C; F-100 / F-250 300 4WD or Power Pak; ...... 70369...... ea...... 11.95 ’71 F-350 M/T SRW without A/C; ...... 70369...... ea...... 11.95 Billet Aluminum ’71 F-350 A/T without A/C, with SRW; 14 lbs. F-350 without A/C or X/C. ’53 - ’72 ...... B8100...... ea...... 34.95 ...... 71013...... ea...... 14.95 ’72 240 M/T with X/C; 300 4WD A/T with S/C. Thermocap Radiator Cap ...... 70369...... ea...... 11.95 Provides better cooling efficiency, indicates coolant temperature and helps prevent coolant injuries. Using Upper Curved, 8-cylinder the temperature gauge you can easily determine if it is 302 CID safe to remove the cap. Fits most domestic vehicles. ’72 F-Series. 13 lbs...... 2470S...... ea...... 34.95 With X/C...... 70501...... ea...... 14.95 Radiator Drain Cock 352 CID Brass. Made in the USA. Metal-to-metal seats provide ’65 F-Series M/T 4WD except F-350. leak-proof performance. Will take up to 150 PSI ...... 70582...... ea...... 18.95 pressure. ’66 F-Series M/T except F-350; ’53 - ’72...... DV31...... ea...... 3.95 F-Series A/T; F-350 M/T with SRW. ** Radiator Grille Air Deflector Seals are on page 2. ** ...... 70582...... ea...... 18.95

www.autokrafters.com 62 Radiator Hoses continued Upper Curved, 8-cylinder Continued 352 CID Continued ’67 F-Series M/T except F-350; BAAA-8125s B6c-8125s F-Series A/T – fits from pipe to engine; F-350 M/T with X/C and DRW...... 70582...... ea...... 18.95 360 / 390 CID ’68 F-Series without A/C and without X/C, with dual and SRW...... 70682...... ea...... 9.95 ’68 F-Series with A/C, X/C, DRW; F-350 with A/C and SRW...... 70737...... ea...... 9.95 B7c-8125s c1tz-8125s c4tz-8125s ’69 - ’70 F-Series without A/C...... 70682...... ea...... 9.95 Radiator Support-to-Frame Pad and Bolt Kits F-Series with A/C or X/C. ’53 - ’55 ...... BAAA-8125S...... kit...... 18.95 ...... 70737...... ea...... 9.95 ’56 F-100...... B6C-8125S...... kit...... 17.50

ENGINE / RA D IATOR ’71 F-Series with S/C.... 70682...... ea...... 9.95 ’57 - ’60 ...... B7C-8125S...... kit...... 10.95 F-Series 4WD...... 70735...... ea...... 11.95 ’61 - ’64 F-100...... C1TZ-8125S...... kit...... 28.95 ’71 - ’72 F-Series with super X/C. ’65 - ’72 F-Series except 4WD...... 70737...... ea...... 9.95 ...... C4TZ-8125S...... kit...... 59.95 ’72 F-Series with S/C or X/C...... 70682...... ea...... 9.95 Lower Curved, 6-cylinder C7TZ- D3TZ- 223 CID 8146B 8146B ’57 - ’63 ’57 - ’60 with or without A/C; ’58 fits to water pump – cut to fit; ’59 - ’60 fits from cooler to water pump – cut to fit; ’62 - ’63 M/T except F-350.... 70391...... ea...... 13.95 Fan Shrouds 240 / 300 CID ’68 - ’72 Casting #s C7TA-H, D2TA-HA or D3TA-JA ’65 4-speed –cut to fit.... 70575...... ea...... 15.95 All 360 / 390 with or without A/C. ’68 - ’70 F-350 with X/C; ’66 F-350 A/T with SRW – cut to fit. ’71 - ’72 F-Series with S/X/C except California...... 70311...... ea...... 19.95 Measures 28" × 253⁄4", 211⁄4" opening diameter. ’67 F-Series 300 A/T without TE – fits to radiator...... C7TZ-8146B...... ea...... 129.95 ...... 70311...... ea...... 19.95 ’69 - ’72 Casting # D3TA-CA ’69 To serial #E10,001.. 70368...... ea...... 10.95 F-100 / F-250 302, X/C with or without A/C. Measures 281⁄ " × 213⁄ ", 19" opening diameter. Lower Curved, 8-cylinder 4 8 ...... D3TZ-8146B...... ea...... 119.95 360 / 390 CID ’68 F-Series without A/C; Fan blade – 17" v8 F-350 without A/C, with SRW. This high quality all-steel fan has the appearance ...... 70683...... ea...... 14.95 of original equipment. This heavy duty 35º pitch, 6- ’69 Without A/C...... 70688...... ea...... 14.95 blade fan will move a large volume of air. Can also ’70 F-Series with or without A/C. be used as a replacement fan. It does not come ...... 70683...... ea...... 14.95 with spacers. ’71 F-Series with S/C.... 70683...... ea...... 14.95 NOTE: We have no control over installation of ’72 F-Series with S/C or X/C. optional fan blades with regard to fan clearance and / or engine movement ...... 70683...... ea...... 14.95 that could cause the fan to damage other components. No payment will be made for damaged parts. The fan will be replaced for defects in workmanship or materials ONLY. Always measure carefully and check the B-8287 condition of the engine mounts. V8...... 9113...... ea...... 59.95

Radiator Hose Clamps Radiator Bypass Hose ’71 - ’72 302. Cut to fit. Upper ’53 F-100 8-cylinder. ��������� 70646...... ea...... 7.95 15⁄8" O.D...... 8BA-8287...... ea...... 1.75 ’53 - ’64 F-100 239, 272, 292. 17⁄8" O.D...... AB-8287...... ea...... 1.95 ’53 - ’66 F-100 6-cylinder. 17⁄8" O.D...... AB-8287...... ea...... 1.95 ’65 - ’66 F-Series 352. 9 2 ⁄16" O.D...... 11A-8287...... ea...... 1.75 C3OZ-8592 C4TZ-8592C Lower Thermostat Housings ’53 - ’56 F-100 8-cylinder. Includes gasket. 21⁄8" O.D...... B-8287...... ea...... 1.95 ’53 - ’66 F-100 6-cylinder. ’63 - ’72 302...... C3OZ-8592...... ea...... 16.95 21⁄ " O.D...... B-8287...... ea...... 1.95 ’66 - ’72 360, 390. 8 ...... C4TZ-8592C...... ea...... 19.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 63 ENGINE / RA D IATOR / TIMING CHAIN HEATER

2662 2664 Chrome Thermostat Housings Chrome-plated housings with o-ring style seals to prevent water leaks. Precision die-cast for a great fit, polished to a high luster, then chrome C2AZ-6019D D3OZ-6019A E5TZ-6019H plated for lasting beauty. O-rings and attaching hardware included. Looks Timing Chain Covers great with chrome valve covers and air cleaners. ’67 - ’72 352, 360, 390. ’65 - ’72 289, 302...... 2662...... ea...... 13.95 Remanufactured, not new. ’68 - ’72 429, 460...... 2664...... ea...... 14.95 ...... C2AZ-6019D...... ea...... 99.95 ’69 - ’72 302...... D3OZ-6019A...... ea...... 69.95 Thermostat Housing Gasket ’70 - ’72 6-cylinder...... E5TZ-6019H...... ea...... 49.95 Has hole for bypass tube. ’53 - ’72 6-cylinder, 302...... AP60720...... ea...... 1.25 HH65W

Thermostat ’67 - ’72 ’67 - ’71 390; ’68 - ’72 302. HH68R ...... B308...... ea...... 2.95

HH69R

HH70Y

FP1479 WP953 HH71Y Water pumps Motorcraft® Original Style Heater Hoses Cast iron. 5⁄8" diameter black, ribbed hoses. Date codes, where applicable, are ’69 - ’72 302. exact. Use with casting numbers D7TE-8505AA and D0OE-8505D. ’53 - ’67 No date code. Sold in two 4' lengths. May need to change bypass hose as necessary...... HH65W...... pr...... 24.95 ...... PW153...... ea...... 106.95 ’68 Red Autolite date code. Sold in one 8' length...... HH68R...... ea...... 24.95 Aftermarket ’69 Red Autolite date code. Sold in one 8' length. ’56 - ’64 ’56 272 / 292 except heavy duty; ’57 - ’60 272, 292; ’61 - ’64 ...... HH69R...... ea...... 24.95 292...... FP1181...... ea...... 166.95 ’70 Yellow Autolite date code. Sold in one 8' length. ’64 - ’72 352, 360, 390...... FP1479...... ea...... 69.95 ...... HH70Y...... ea...... 24.95 ’65 - ’70 240, 300...... FP1497...... ea...... 91.95 ’71 - ’72 Yellow Autolite date code. Sold in one 8' length. ’69 - ’72 302, 351W. May need to change bypass hose as necessary...... HH71Y...... ea...... 24.95 ...... WP953...... ea...... 49.95 Heater Hose Clamp Brass freeze plug kit ’53 - ’72 15-piece kit includes 6 brass plugs...... HC209...... ea...... 3.00 ’68 - ’72 260, 289, 302, 351W...... 6483...... kit...... 29.95 Heater Control Valve Can be used on any car or truck as an auxil- Roller timing set lary heater core cut-off, used with 3⁄8" heater By Cloyes® hose. Set includes cast-iron cam sprocket, double roller ’53 - ’72 ...... C3UZ-18495A...... ea...... 34.95 chain and induction hardened crank sprocket. The ® True roller chain is seamless with .250 rollers. The three keyway crank sprocket allows for crankshaft 8H-18556B timing adjustment by ±4º. Made in the USA. Defroster Hoses ’62 - '72 Small-block V8 with 1-piece fuel pump. 13⁄ " I.D...... 8H-18556B...... ft...... 5.95 ...... 91135...... set...... 62.95 4 2" I.D. 6' sections...... FAB-18556D...... ea...... 22.95 21⁄2" I.D. 6' sections...... B5A-18556BX...... ea...... 24.95

Auto Krafters’ catalogs are now available Timing pointers online in PDF format! ’65 260...... C2OZ-6023B...... ea...... 9.95 ’68 - ’72 302...... C2OZ-6023B...... ea...... 9.95 Just visit our website at www.autokrafters.com

www.autokrafters.com 64 Engine Oil Cooler This oil cooler uses a “stacked plate” BF- C7SZ- design and improves efficiency 35% 17615A 17A601A over conventional fin type coolers. Includes all fittings, instructions and attaching hardware. The unit mea- sures 8" × 11" × 1.5". Windshield Washer Hose Tee connectors ’57 - ’63 Wiper hose to foot control. Fits vehicle engines with FL-1A oil filters...... BF-17615A...... ea...... 29.95 ...... M6642S101...... kit...... 119.95 ’67 - ’72 F-shaped...... C7SZ-17A601A...... ea...... 1.95

C1AZ- E0AZ- 17664A 17664A 51A-17562 BAAA-17545 8A-14605A Windshield Wiper-related Grommets Windshield Washer Pumps ’53 - ’55 F-100. Wiper arm to motor. ’65 - ’66 F-100, F-250...... C1AZ-17664A...... ea...... 39.95 ...... 51A-17562...... ea...... 1.95 ’53 - ’56 Wiper hose...... BAAA-17545...... ea...... 1.00 ’71 - ’72 ...... E0AZ-17664A...... ea...... 19.95 ’56 F-100. Electric wiper motor cable...... 8A-14605A...... ea...... 95

06H- C5ZZ- 17531 17531a

Windshield Wiper Arm Linkage Clips Under-dash to motor.

ENGINE / WASHER BATTERY ’53 - ’66 F-100...... 06H-17531...... ea...... 1.25 6501 6601 ’67 - ’72 Genuine Ford...... C5ZZ-17531A...... ea...... 2.95 Universal Pump and Hose Kits Reproduction...... AK404...... ea...... 3.00 Includes pump, hose and hardware. b6c-17508rr ...... 6501...... ea...... 19.95 Includes pump, reservoir, hose wire and hardware...... 6601...... ea...... 49.95

Windshield Washer reservoirs and cap

Electric Wiper Motors C8TZ- D1TZ- 12 volt, 2 speed electric motor. Complete with wiring, switch and clevis. 17618A 17618B ’53 - ’55 F-Series. Includes mounting bracket...... BAAA-17508...... ea...... 169.95 Reservoirs ’56 - ’60 F-100. ’68 - ’70 F-Series except Power Pak. Includes mounting bracket...... C8TZ-17618A...... ea...... 29.95 ...... B6C-17508RR...... ea...... 169.95 ’71 - ’72 F-Series except Power Pak. ’61 - ’66 F-100. Genuine Ford...... D1TZ-17618B...... ea...... 36.95 Includes template to rework existing bracket...... C1TZ-17508RR...... ea...... 149.95

B8S-17632A C7AZ-17632A Caps BAAA-17542A B6Q-17542A ’65 - ’67 F-100 / F-250 with switch-actuated washer. Wiper Motor Clevis ...... B8S-17632A...... ea...... 5.95 Use when changing from vacuum to electric motor. Both include motor. ’68 - ’70 F-Series...... C7AZ-17632A...... ea...... 5.95 ’53 - ’55 F-100...... BAAA-17542A...... ea...... 9.95 ’56 - ’60 F-100...... B6Q-17542A...... ea...... 19.95

Batteries and Related

D3TZ-17543 NOTE: Electrical parts are non-returnable once installed. We will replace defective units only. Windshield Washer Hoses NOTE: All batteries carry a $39.95 shipping fee. ’53 - ’60 1⁄4" diameter. Sold by the foot...... 99A-17543...... ft...... 95 ’71 - ’72 Hose kit. Includes 3 hoses and tee connector. Autolite Battery Cover ...... D3TZ-17543...... kit...... 9.95 ’64 - ’72...... 24FCOVER...... ea...... 34.95 ** For Electric Wiper Switches, see page 32. **

ORDER TOLL FREE 1 - 800 - 228 - 7346 65 Batteries – ENGINE / BATTERY / VOLTAGE REGULATOR Battery Maintainer sealed maintenance-free These valve regulated batteries are painted exactly by Schumacher as the Ford OEM designed Autolite battery with the Fully automatic with float-mode monitor- top script painted red and the front script unpainted. ing. Ideal for maintaining stored batteries. Valve regulated batteries operate within the same Keeps stored lead-acid batteries charged. voltage ranges as regular wet batteries and can be Maintains the battery when fully charged charged with a conventional charger. A fully-automatic charger is recom- and resumes continuous charging when mended to eliminate the possibility of overcharge. A battery maintainer is battery becomes discharged. Features 6' recommended when storing your vehicle for more than 90 days. Features power and output cords for a combined 12' reach. 1.5 amp. authentic looking non-removable battery caps and actually have a small ...... 6267...... ea...... 34.95 pressure relief valve designed into them to keep the battery at proper op- eration pressure. This battery requires no maintenance ever. 4-year pro-rated manufacturer’s warranty. Must retain invoice. Shipped fully charged. ’64 - ’72 780 cranking amps at 32º F, 700 cranking amps at 0º F. 103⁄4" × 63⁄4" × 9"..... S24F...... ea...... 254.95 830 cranking amps at 32º F, 750 cranking amps at 0º F. 12" × 63⁄4" × 9"...... S27F...... ea...... 274.95 B4C-10732A C7TZ-10732J Battery Trays Optima Battery ’53 F-Series...... TAAA-10732A...... ea...... 69.95 This is a sealed, zero-maintenance battery that ’54 - ’55 F-Series...... B4C-10732A...... ea...... 49.95 combines proven lead-acid electrochemistry with ’61 - ’64 F-100 / F-250 2WD. advanced design techniques to create a battery Includes 2 bolts...... C4TZ-10732D...... ea...... 89.95 that out performs the rest of the field. ’67 - ’72 F-Series...... C7TZ-10732J...... ea...... 29.95 2-year manufacturer’s replacement warranty. The remaining 48 months are pro-rated. Made in USA. 12 volt. 800 cold-cranking amps. 120 minute reserve capacity. 44 lbs...... KY800U...... ea...... 179.95

Battery Box C5DZ-10718A D0DZ-10718A Polyethylene. For mounting battery in trunk or other locations. Comes complete with tie downs, strap brackets and screws. For Group 24 batteries ...... M300...... ea...... 16.95 C7TZ-10A691B D0AZ-10756A Battery Hold-down Hardware Hold-down Clamps ’59 - ’60 F-Series...... C5DZ-10718A...... ea...... 4.95 Negative Battery Cable Switch ’67 - ’72 Used with tray #C7TZ-10732J and J-bolt #D0AZ-10756A. Keeps battery charged up without having clocks and accessories drain ...... D0DZ-10718A...... ea...... 11.95 battery while parked for extended times. Easy to install. Attaches directly Hold-down Bracket and Outer Bolt to battery terminal...... NEGSW...... ea...... 8.95 ’61 - ’64 F-100 / F-250 2WD. Used with tray #C4TZ-10732D. Anti-Corrosion Battery Washers ...... C1TZ-10A707A...... ea...... 14.95 Slips over battery stud before cable end is Tray Bracket installed. Keeps your battery looking clean. ’67 - ’72 Use with tray #C7TZ-10732J. ����������������� AP15...... pr...... 1.00 ...... C7TZ-10A691B...... ea...... 9.95 J-bolts Battery Tender® Plus Includes nuts. This 1.25 amp battery charger is designed to ’67 - ’72 F-Series. Requires 2 per vehicle. fully charge and maintain a battery at proper ...... D0AZ-10756A...... ea...... 2.50 storage voltage without the damaging effects that trickle chargers may cause. Its “BTP” microchip technology applies the correct Voltage Regulator Socket peak charge, then automatically maintains the battery at the perfect and Wiring float voltage, which virtually eliminates battery-destroying sulfation! This Replacement for OEM socket and wiring harness. results in a battery that is ready to go when you are and has an extended Has 6 wires coming from it. life. Features a powder coated aluminum chassis, built-in 72-hour timer ’65 - ’72 With alternator. that will protect a marginal battery from overcharging and is spark-proof...... 85124...... ea...... 9.95 Works on lead-acid, sealed calcium or gel batteries. 10-year manufacturer’s warranty. Not sure of a term used here? ...... 0210128...... ea...... 62.95 Check out the Glossary in the back of this catalog.

www.autokrafters.com 66 Voltage Regulators VOLTAGE Regulator Cover ’62 - ’64 F-Series with generator...... C2AF-COVER...... ea...... 22.95

Remanufactured Alternator C2AF-10505B Single pulley, 40 - 65 amps. ’65 - ’72 F-Series...... 7058...... ea...... 54.95 With Generator – Show-quality Reproductions 30 Amp ’62 - ’64 With generator. FoMoCo script. Stamped with part #C2AF-10505-A...... C2AF-10505B...... ea...... 44.95

With Alternator – Show-quality Reproductions PA70 PA70-1 PA70-1N 38 / 42 Amp Alternators – 70 Amp ’63 Without A/C. Premium 70 amp alternators. Includes pulley and fan. Black with blue lettering and FoMoCo logo. NOTE: 1-year manufacturer’s warranty. Defective alternator must be ...... C3XF-FOMOCO...... ea...... 39.95 returned in its original box. ’64 Without A/C. Black with silver lettering and FoMoCo logo. Chrome ...... C4UF-FOMOCO...... ea...... 39.95 ’61 - ’72 Fits most vehicles with alternators that have a small case. ’65 Before 12/64 without A/C...... PA70...... ea...... 159.95 Black with silver lettering and FoMoCo logo. ’61 - ’72 Fits most vehicles with OE small case alternator with ear ...... C5AF-FOMOCO...... ea...... 39.95 holes 6.875" center-to-center and an external regulator. ’65 - ’67 After 12/64 without A/C. Features only 1 wire from the alternator to the battery, Black with silver lettering and Autolite logo. thereby eliminating your firewall mounted regulator...... C5AF-AUTOLITE...... ea...... 39.95 ...... PA70-1...... ea...... 189.95 ’68 Without A/C. Blue with silver lettering and Autolite logo. Natural Finish ...... C8AF-AUTOLITE...... ea...... 39.95 ’61 - ’72 Features only 1 wire from the alternator to the battery, thereby eliminating your firewall mounted regulator...... PA70-1N...... ea...... 119.95

MG5185 D0OZ-10156A

C8TF-10316 C5TF-AUTOLITE 45 / 55 Amp Alternator Brackets ’63 With A/C. ’68 - ’69 Aftermarket. Chrome. Includes adjustment arm and top Black with yellow lettering and FoMoCo logo. bracket...... MG5185...... set...... 24.95 ...... C3TF-FOMOCO...... ea...... 39.95 ’70 - ’72 F-100 / F-250 302, 351W or 351C.

ENGINE / VOLTAGE REGULATOR / ALTERNATOR REGULATOR ENGINE / VOLTAGE ’64 - ’72 With A/C. Casting #D0OE-10156-A. Blue with yellow lettering and Autolite logo...... D0OZ-10156A...... ea...... 24.95 ...... C8TF-10316...... ea...... 39.95 ’65 With A/C. Alternator One-wire Black with yellow lettering and FoMoCo logo...... C5TF-FOMOCO...... ea...... 39.95 Conversion Kit ’65 - ’67 With A/C. Convert your externally-regulated Ford alternator Black with yellow lettering and Autolite logo. to one wire. Kit includes Ford single wire voltage ...... C5TF-AUTOLITE...... ea...... 39.95 regulator for 38, 42, 45, 55, or 61 amp alterna- ’72 With A/C. tors, 2 spacer nuts, 4 terminal nuts and 1 battery Blue with yellow lettering and Motorcraft logo. terminal nut...... D2TF-MOTORCRAFT. ea...... 39.95 NOTE: Full instructions come with the kit. ’65 - ’72 ...... F10316SW...... ea...... 39.95

C5AZ- D0AZ- 51A-10505 B6A-10505 GR540AHD 10A310 10A310B Replacement Not OEM, not show quality. ’53 - ’55 6 volts. Black...... 51A-10505...... ea...... 40.95 Alternator Fans ’56 - ’61 F-100. ’65 - ’70 Before 10/69. 12 volts. Black...... B6A-10505...... ea...... 29.95 13 blade. Zinc dichromate gold. ’65 - ’72 With alternator...... C5AZ-10A310...... ea...... 9.95 Electronic...... GR540AHD...... ea...... 9.95 ’70 - ’72 Duralife heavy duty. ’70 - ’72 After 10/69...... SW3HD...... ea...... 10.95 10 blade...... D0AZ-10A310B...... ea...... 9.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 67 ENGINE / ALTERNATOR / AIR CON D ITIONER STARTER / OIL

480PLP 482FRDP

C5AZ-10344H C5AZ-10344K C5AZ-10344L Alternator Pulleys ’65 For Hi-Po pulley alternators. Solid steel for quieter operation and better durability than 511PLM 513FRDM aluminum. 3.87" Hi-Po. Shown Mounted 511PLM ...... C5AZ-10344H...... ea...... 39.95 A/C Compressor Cover Plates ’65 - ’72 For single-pulley alternator. Fits all with York or Tecumseh A/C compressors. Mounting hardware is Stamped zinc dichromate, gold color. 2.62". included with each...... C5AZ-10344K...... ea...... 15.95 Polished Plain...... 480PLP...... ea...... 39.95 ’65 - ’72 For double-pulley alternators. Ford logo...... 482FRDP...... ea...... 39.95 Solid steel for quieter operation and better durability than Matte Plain...... 511PLM...... ea...... 39.95 aluminum. 2.62"...... C5AZ-10344L...... ea...... 22.95 Ford logo...... 513FRDM...... ea...... 39.95

C5AL-643 C7AL-644 04-3132 04-3124 04-3131 Alternator Pulley Nuts and Washers Starters – Remanufactured ’65 - ’66 Clear zinc...... C5AL-643...... ea...... 2.00 ’65 - 72 240, 300, 302. ’67 - ’72 Gold zinc...... C7AL-644...... ea...... 2.00 M/T...... 04-3132...... ea...... 49.95 A/T...... 04-3124...... ea...... 49.95 ’65 - ’72 352, 360, 390...... 04-3131...... ea...... 49.95 NOTE: Core fee for all is $25.00.

Starter Repair Kit – For Ford Starters Includes bushings, washers, snap ring, 2 positive brushes, 2 negative brushes and 1 remanufactured starter drive. A 1-800 installation phone number is included. C5TZ-14305 C7TZ-14305 ’63 - ’72 With Ford starter..... 67-2801...... kit...... 19.95 Alternator Wiring Harnesses ’65 - ’66 F-100 8-cylinder...... C5TZ-14305...... ea...... 64.95 ’67 F-100 8-cylinder...... C7TZ-14305...... ea...... 64.95 16365 16322

Oil Pan Gaskets ’54 - ’55 256 with OHV; F-100 239 with OHV. Generator Terminal Cover Rubberized cork. Resilient. 1-piece. Installed by the factory on all ’62 - ’64 Fords with generator. Snaps over ...... 16365...... ea...... 18.95 terminals. N.O.S. ’65 - ’66 352. NOTE: Fits original Ford regulators only. Rubberized cork. Resilient. 1-piece...... 16365...... ea...... 18.95 ’62 - ’64 ...... C2AF-10A555A...... ea...... 17.95 ’68 - ’72 302. Made of quality fibrous material with a rubber binder that can withstand temperatures to 350º F. Set includes right and left hand gaskets and front and rear seals. 4-piece set...... 16322...... set...... 14.95 ’68 - ’72 360, 390. Rubberized cork. Resilient. 1-piece...... 16365...... ea...... 18.95

Feed-to-Generator Wiring Harness ’64 F-100 8-cylinder...... C4TZ-14305...... ea...... 119.95 090005 15

Oil Pan Drain Plugs Can’t decide on a gift idea? 1⁄2" stud. Includes gasket. How about an Auto Krafters Gift Certificate? ’57 - ’72 ...... 090005...... ea...... 3.95 They are available in your choice of dollar amount. Magnetic – accumulates metal particles found in the oil, Check online or ask your sales associate today. preventing possible damage to the engine...... 15...... ea...... 6.95

www.autokrafters.com 68

5723

57235 (A) (B) (C) (D) (E) Oil Filters Oil Dipsticks and Tubes ’57 - ’72 Autolite. White. 260, 289, 302. (A)...... C1AZ-6731A...... ea...... 34.95 Chrome handle stick, tube and adjustable bracket. Gold

ENGINE / OIL Motorcraft filter iridite finish on the stick itself will not flake. Markings match (B)...... FL-1A...... ea...... 4.95 original equipment... 5723...... ea...... 16.95 Ford Racing filter Billet dipstick, tube and adjustable bracket. Features a tube Features heavy duty steel casing, a high capacity media base made to OE specifications for a correct fit. that meet the demands of a high-performance engine, and ...... 57235...... ea...... 19.95 a silicone anti-drainback valve for protection at startup. (C)...... M6731FL1A...... ea...... 19.95 Red Rotunda reproduction. Red with white letters. (D)...... C1AZ-6731AR...... ea...... 34.95 Gold Rotunda reproduction. (E)...... C1AZ-6731AG...... ea...... 34.95 Flexible Engine DipStick – FE Features a machined aluminum handle, braided tube and an easy-to- Chrome Oil Filter read stainless stick. Includes mounting bracket. Show quality triple-process chrome. Exceeds OEM specifica- tions and removes engine damaging particles. Unlike cheap ’65 - ’72 ’65 - ’67 352; ’68 - ’72 360, 390...... ED5012...... ea...... 59.95 imports, Moroso chrome oil filters are hand polished and rack nickled before chroming to insure the highest luster possible. Filter performance, construction and quality control are all Oil Filler Caps engineered to meet exacting racing standards. Rolled formed threads ensure precise spin-on fit, triple-process chrome won’t peel or flake, gasket retainer and sealing gasket prevent leaks, and cured resin impreg- nated element removes harmful particles. 51⁄4" high. Made in the USA. Logo on ’57 - ’72 V8 with spin-on filter...... 22400...... ea...... 27.95 Top EC-31FB C8AZ-6766A Black ’65 - ’70 For closed emissions. FoMoCo block logo on the top. Push-on with tube...... EC-31FB...... ea...... 19.95 ’68 - ’70 ’68 - ’70 360, 390; ’69 - ’70 302. For closed emissions. Twist-on with elbow. Includes grommet in the top of the cap...... C8AZ-6766A...... ea...... 29.95 Oil Filter Conversion Kit Converts canister-type oil filters to convenient spin-on oil filters. Kit includes adapter plate, threaded fitting and rubber gasket. ’53 - ’64 6-cylinder; ’54 - ’64 8-cylinder with canister-type filter. Yellow ® ...... B7A-6882A...... kit...... 24.95 Motorcraft . ’71 - ’72 6- or 8-cylinder...... EC682...... ea...... 29.95

SW1547B SW669 SW1311 Chrome Twist-on with elbow. Autolite logo on the top. Includes grommet in the Oil Pressure Sending Units top of the cap. ’64 - ’72 8-cylinder with gauge. ’68 - ’70 ’68 - ’70 360, 390; ’69 - ’70 302. For closed emissions...... SW1547B...... ea...... 14.95 ...... C8AZ-6766B...... ea...... 39.95 ’67 - ’72 6-cylinder with light. Long stem...... SW669...... ea...... 9.95 ’67 - ’72 8-cylinder with light. Short stem...... SW1311...... ea...... 6.95

B9TE-6750B 17385 43105 Billet Replacement Oil Dip Sticks Fits valve covers with a 11⁄4" filler hole. Plug-in style. ’53 F-Series...... 17385...... ea...... 12.95 Chrome...... 8BA-6750CH...... ea...... 24.95 Fits valve covers with a twist-lock type filler hole. Includes gasket. ’54 - ’59 F-100 239, 256, 272, 292...... 43105...... ea...... 12.95 ...... B9TE-6750B...... ea...... 19.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 69 ENGINE / OIL HARMONIC BALANCER / FUEL

2060 4281 Replacement Chrome Oil Filler Caps For use with small-block valve covers on page 74. 80006 80009 Push-on...... 2060...... ea...... 6.95 Twist-on...... 4281...... ea...... 6.95

Oil Filler Cap Adapter Allows you to use a push-on type oil filler cap with a twist- on type filler hole. Includes gasket. ����������������������������� C5AZ-6A868A...... ea...... 14.95 D5TZ-6316D D2OZ-6316A Harmonic Balancers Logo on Top Logo on Top Logo on Top ’63 - ’69 289, 302. 6.4". Features a 28.4 oz. counterweight and is made to the early style short length. Includes both 3- and 4-bolt pulley patterns as well as three sets of timing marks...... 80006...... ea...... 94.95 ’65 - ’72 FE (352, 360, 390, 406, 427, 428).

M-6766G302 M6766B302 M6766A302 7.5". Features a supplied timing pointer that fits where the stock pointer mounts, allowing you to use this damper in Chrome Breather Caps place of your stock 7" damper. Also includes a V-grooved Features either Ford Racing or Ford Motorsport logo on top. pulley for the alternator belt to be used as-is for a one-belt application. For engines prior to 1968 with two pulleys you Ford Racing can bolt your second pulley onto the supplied pulley. On en- ’60 - ’72 Push-in...... M-6766G302...... ea...... 10.95 gines after 1968, you remove the supplied pulley and using ’60 - ’72 Open crankcase. the supplied spacer, bolt your pulleys onto the damper. Push-in...... M6766B302...... ea...... 9.95 ...... 80009...... ea...... 124.95 Ford Motorsport ’68 - ’72 360, 390...... D5TZ-6316D...... ea...... 99.95 ’60 - ’72 Small-block with open crankcase. ’69 - ’72 302. Twist-in...... M6766A302...... ea...... 10.95 4 bolt damper with a 61⁄2" diameter...... D2OZ-6316A...... ea...... 99.95 Crankcase Ventilation Hose Nipple Attaches crankcase ventilation hose to valve cover. ’71 - ’72 240, 300...... D1TZ-6767A...... ea...... 4.95

Harmonic Balancer Repair Sleeve Easy to install, requires no special tools. ’65 - ’72 ’65 - ’67 352; ’68 - ’72 360; ’68 - ’72 390; ’70 - ’72 302. Crankcase Ventilation Breather ...... HB3124...... ea...... 4.95 Replacement type. ’71 - ’72 6- or 8-cylinder...... FA87...... ea...... 1.95

Harmonic Balancer Rebuild ** Call our Rebuild Department to place an order or for any questions concerning rebuilds. ** Harmonic balancers fail for many reasons: heat, cold, fire, age, gasoline, oil, petroleum fluids of any kind, grease, stripping bath solutions, etc. The replacement material we use is virtually impervious to all of these except HC1850C HC80457S fire. Our quality harmonic balancer rebuild consists of replacement of the ® original cylindrical rubber or neoprene. The hub is placed in a press to Holley Carburetors remove rubber, wire brushed if necessary, and bead blasted to ensure a ’53 - ’72 V8. 4/V, 600 CFM. clean bonding surface, the two parts are aligned vertically, horizontally, and Manual choke with power valve blow-out protection and concentrically. The cylindrical space is then poured with a black silicone vacuum secondaries. Includes a fast idle adjustment and PVC polymer, placed in a vacuum chamber to remove entrained air, then vulca- spark ports, carburetor to engine gasket, air cleaner gasket, 2 nized in a laboratory oven. Please allow 3 weeks plus shipping time for fuel fittings with gaskets and instructions. Classic finish. the rebuild. You must supply a core for rebuild or you can purchase a core ...... HC1850C...... ea...... 299.95 when available, with no core refund from our Rebuild Department. ’65 - ’68 V8. 4/V, 600 CFM. Electric choke. Calibrated for excellent street performance...... HBR...... starts at...... 149.95 50-state emission legal. Shiny finish...... HBRCORE...... 100.00 ...... HC80457S...... ea...... 359.00 NOTE: We can also install outer shaft seal sleeves if shafts are badly worn or pitted for an additional $25.00.

www.autokrafters.com 70 Vacuum Lines Advance Lines When ordering, put “SS” on the end of the part # for stainless steel. Universal Throttle Spring ...... 329013...... ea...... 2.50 Original Stainless ’53 - ’56 6-cylinder...... FRE5302...... 24.95...... 29.95 ’61 - ’64 F-100 6-cylinder. 1 piece...... FRE6102...... 24.95...... 29.95 TCHT TCU

Distributor ’55 F-100...... FTO1006...... 19.95...... 26.95

ENGINE / FUEL 54000 Throttle Cables – Universal 24" These are not a direct factory replacement. May require modification. ’53 - ’72 Braided cable...... TCHT...... ea...... 59.95 Stock cable...... TCU...... ea...... 49.95 Intake Manifolds For gasket, see part #23049 below. ’65 - ’72 260, 289, 302. Polished chrome. Includes hardware...... 54000...... ea...... 249.95 Satin finish chrome. 54001...... ea...... 179.95 Chrome finish...... 54002...... ea...... 299.95

Universal Throttle Cable Kit – 36" Kits contain all hardware and fasteners. Stainless braided housing...... 2431...... kit...... 44.95

2121 7220 Edelbrock® Intake Manifold Made in the USA. 289, 302 without EGR...... 2121...... ea...... 184.95 SP2418 SP24283 Universal Throttle Cable Brackets Edelbrock® Intake Manifold Gaskets Easy to install. Features adjusting screw to maintain proper alignment of For use with intake manifold part #2121 above. throttle cable. Chrome finish. 289, 302...... 7220...... set...... 21.95 All 2/B and 4/B. Without A/T kick-down cable bracket...... SP2418...... ea...... 14.95 With A/T kick-down cable bracket...... SP24283...... ea...... 23.95

Intake Manifold Gaskets Fast Idle Cam Lever Set features WhiteSeal Technology™ that brings a new standard in qual- For use on Autolite carburetors. ity to aftermarket gaskets. Comes with 2 intake gaskets, end seal and Straight arm...... C4AZ-9F577B...... ea...... 13.95 distributor O-ring. 260, 289, 302...... 23049...... set...... 14.95

FG14C C4AZ-9365B Fuel Filters ’65 - ’72 F-Series 240 / 300 with screw-in filter on front of carburetor. 4700 4708 Fine thread...... FG14C...... ea...... 2.95 ’63 - ’72 ’63 292; ’64 - ’72 F-Series. Yellow...... C4AZ-9365B...... ea...... 3.95 Universal Throttle Spring Kit Triple chrome plated. Use the dual springs for additional return response needed with any high performance carburetor...... 4700...... kit...... 8.95 Chrome Aluminum High-performance Filter Adds a finishing touch to your engine compartment. Features a replace- Universal Throttle Return Spring Bracket able element and includes 2 chrome-plated clamps for installation. Not 3 Triple chrome plated. Designed for multiple mounting points and easy to for fuel injected systems. Fits ⁄8" fuel hose. install. For springs, see part #4700 above...... 6153...... ea...... 9.95 ...... 4708...... ea...... 6.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 71 Fuel Filters Continued ENGINE / FUEL

10205 10220RE Powerflow™ Inline Street PerformanceFuel Filter Universal Electronic Fuel Pump and Element Easy to install. 12 volt, compatible with all fuels and additives, eliminates Billet aluminum with a sintered bronze element. Fits 3⁄8" fuel lines. See part #10220RE for the replacement element. vapor lock. Solid state 2 wire design. Self-priming...... 10205...... ea...... 15.95 ...... PRO12S...... ea...... 41.95 Replacement element for fuel filter above...... 10220RE...... ea...... 5.95

Universal Fuel Line Fuel Filter Canister Hose and Clamp Kit Red with white lettering. Kit includes 36" of hose, 8 spring clamps and 8 keystone clamps. ’63 - ’72 ’63 292; ’64 - ’72 all. With 5⁄16" fuel hose...... C3AZ-9355AR...... ea...... 19.95 ...... HHK0001...... kit...... 11.95 Premium Quality Fuel Lines by

60092 4990 and

Typical Fuel Lines ® Fuel Pumps by Master Fuel Lines ’65 - ’72 ’65 F-Series 240, 300; ’66 F-Series 240 from serial These reproduction lines are pre-bent using a sample from an original #844,001; ’67 - ’72 F-Series 240, 300. vehicle as a pattern...... 60092...... ea...... 39.95 ’70 - ’71 ’70 - ’71 F-100 302 2WD; ’71 F-250 302 2WD. Please add “SS” to the end of the part number when ordering stainless ...... 4990...... ea...... 34.95 steel. NOTE: These are special-order items which take 2 to 4 weeks for delivery. ® Holley Fuel Pump NOTE: There is a $10.00 per order boxing fee for larger lines, and Has a 71⁄ PSI pre-set shutoff, 80 GPH (gallons 2 additional shipping charges may apply. per minute) capacity and its solid construction is great for continuous high RPM operation. Main Fuel Line Original Stainless Can be rotated for various plumbing designs. ’56 F-100. Cab tank to pump. Includes gasket and 6 fittings. 2 pieces...... FRF5601...... 77.95...... 107.95 NOTE: This product is not legal for sale or use ’56 F-100 8-cylinder. Cab tank to pump. in California except on pre-1966 vehicles. 2 pieces...... FRF5602...... 77.95...... 107.95 ’57 - ’60 F-100 6-cylinder. ’63 - ’72 ’63 - ’68 289; ’68 - ’72 302. 2 pieces...... FRF5702...... 71.95...... 101.95 ...... 12833...... ea...... 99.95 ’57 - ’60 F-100 V8. 2 pieces...... FRF5701...... 71.95...... 102.95 Tank to Pump ’55 F-100. 5 7705FP 7706 ⁄16"...... FTF1002...... 104.95...... 129.95 ’65 - ’66 F-100 V8...... FRF6501...... 59.95...... 101.95 ’67 - ’69 F-100 / F-250 2WD FRF6701...... 66.00...... 102.95 ’70 F-100 / F-250 2WD FRF6702...... 64.95...... 102.95 ’71 - ’72 F-100 2WD...... FRF7101...... 64.95...... 102.95 Chrome Plated Fuel Pumps – Replacements Pump to Carburetor Recommended for stock and street performance. New, not rebuilt. Fea- ’53 - ’56 F-100 6-cylinder...... FRE5301...... 24.95...... 29.95 tures 8 PSI shutoff pressure with delivery up to 80 GPH (gallons per ’61 - ’64 F-100 6-cylinder. 1 3 hour) free flow. ⁄4" NPT inlet / outlet ports complete with ⁄8" diameter 1 piece...... FRE6101...... 24.95...... 29.95 fuel hose fittings. For use on engines up to 400 hp. Its rugged construc- ’71 - ’72 F-100 460 2/B...... FRE7101...... 24.95...... 29.95 tion and premium quality components assures long term reliability. 221, 260, 289, 302, 351W. Air Bypass Valve ...... 7705FP...... ea...... 99.95 ’68 F-100 360 / 390 with T/E. 352, 360, 390...... 7706...... ea...... 89.95 ...... C8AZ-9B289B...... ea...... 119.95

www.autokrafters.com 72

C1TB- B-8287 9047A

Fuel Neck Hose and Clamp 15309 D1AZ-9A011A D1FZ-9A011A Hose Fuel Tank Sending Unit Float and Filters ’56 - ’72 F-100 with in-cab tanks. Float Stamped with part number...... C1TB-9047A...... ea...... 9.95 Brass. ’53 - ’72 ...... 15309...... ea...... 5.95 Hose Clamp ’53 - ’56 6- or 8-cylinder. Requires 2. Filters

ENGINE / FUEL ...... B-8287...... ea...... 1.95 ’53 - ’72 3⁄8" tube...... D1AZ-9A011A...... ea...... 9.95 5⁄16" tube...... D1FZ-9A011A...... ea...... 9.95

B1TZ-9030BS 48-17265 B7C-9284S Fuel Line Grommets Fits where fuel line goes through the floor pan. ’56 F-100...... 48-17265...... ea...... 3.00

RG23 D1PZ-9030K ’57 - ’60 F-100...... B7C-9284S...... ea...... 2.00

Fuel Caps Fuel Tank Straps ’53 - ’70 Chrome. Non-vented, locking. Includes 2 keys. Steel...... B1TZ-9030BS...... ea...... 14.95 ’53 - ’72 Stainless. Vented, non-locking. ’53 - ’55 F-100...... BAAA-9054A...... pr...... 29.95 ...... RG23...... ea...... 8.95 ’70 - ’72 ’70 California trucks; ’71 - ’72 under 6,000 lbs. Chrome top...... D1PZ-9030K...... ea...... 8.95

99A-9275 TAAA-9002D

B8C-9275B

B7C-9002A D1TZ-9002A D7TZ-9275G

Fuel Tanks Fuel Tank Sending Units NOTE: There is a $10.00 per order boxing fee for these items. ’53 - ’55 Includes float, gasket and hardware...... 99A-9275...... ea...... 59.95 NOTE: These items are oversized; additional shipping charges apply. ’57 - ’60 F-Series with 18 gallon in-cab fuel tank. ’53 - ’55 F-Series. Includes float, arm and gasket. 17 gallon in-cab tank. 111⁄2" × 38" × 10". Use with fuel ...... B8C-9275B...... ea...... 59.95 sender #99A-9275 (see previous column). ’61 - ’72 F-Series with in-cab fuel tank...... TAAA-9002D...... ea...... 234.95 Includes float, arm and gasket. ’56 F-Series with in-cab tank...... D7TZ-9275G...... ea...... 49.95 18 gallon. Steel. Direct replacement for the original Ford tank...... B6C-9002B...... ea...... 249.95 ’57 - ’60 F-Series with in-cab tank. 18 gallon. Steel...... B7C-9002A...... ea...... 249.95 C1TF- C0AF- ’61 - ’72 F-Series with in-cab tank, without EV/EM and 3⁄8". 9276B 9276A 181⁄2 gallon. Includes o-ring and lock ring...... D0TZ-9002A...... ea...... 269.95 Fuel Tank Sending Unit Gaskets ’71 - ’72 F-Series with in-cab tank, EV/EM and 3⁄8". ’61 - ’72 F-Series with in-cab tank. 181⁄2 gallon. Includes o-ring and lock ring. 1 5⁄8" I.D., 211⁄16" O.D. 5 holes. Reproduction...... D1TZ-9002A...... ea...... 269.95 ...... C1TF-9276B...... ea...... 2.95 ’67 - ’72 F-100 with auxiliary fuel tank. Not sure of a term used here? ...... C0AF-9276A...... ea...... 1.50 Check out the Glossary in the back of this catalog.

ORDER TOLL FREE 1 - 800 - 228 - 7346 73 Fuel Tank Recondition – Metal Tanks Only Air Filters – K&N® Replacement Continued ENGINE / FUEL AIR CLEANER ** Call our Rebuild Department to place an order or for any questions ’69 390 with GPD carburetor. concerning rebuilds. ** ...... E1560...... ea...... 49.95 If you can’t find your tank new, have it reconditioned! Your tank can be ’70 - ’72 F-Series 240 / 300 1/B. punctured, scraped, or damaged causing rust and corrosion. A chemical ...... E1200...... ea...... 47.95 bonding repair process can fix it. This process is completely compat- ible with gasoline, diesel, high octane, methanol and alcohol. There is a Chrome Air Cleaners – Universal manufacturer’s limited lifetime warranty on passenger car and light truck tanks, 2 years on all others. If you do not have a tank to be reconditioned, call our Rebuild Department for availability of a tank. You may purchase a tank when available, with no core refund from our Rebuild Department. Please allow 3 weeks plus shipping time for this process. NOTE: Flush tank before shipping! Sending units and vents MUST be removed and all holes taped shut prior to shipping. 1491 1490 ...... ea...... 299.95 1/B or 2/B Chrome-plated top and steel base. 61⁄2" diameter. Includes filter, adapter and hardware kit.

For vehicles with 25⁄16" or 25⁄8" diameter neck. Low riser 2" high...... 1491...... ea...... 24.95 AK225 4210 M9697A High riser 31⁄4" high...... 1490...... ea...... 24.95 Air Cleaner Wing Nuts Replacement ’53 - ’72 V8...... AK225...... ea...... 1.25 1486A 1485A Aftermarket – Spectre Will fit any 1⁄4" – 20 threaded studs. This triple-chrome plated tri-corner Replacement Filters for Above Air Cleaners design wing nut features a black wrinkle finish in the center. For cleaner #1491...... 4210...... ea...... 4.95 ...... 1486A...... ea...... 8.95 Aftermarket – Ford Oval For cleaner #1490. Chrome oval with Ford script in center...... 1485A...... ea...... 8.95 ...... M9697A...... ea...... 9.95

Air Cleaner Knob Billet. Smooth top. Fits air cleaner assembly stud size 1⁄4 – 20. Hole drilled and tapped all the way through...... B358871B...... ea...... 10.95

Air Cleaner Filter – Replacement by Spectre 2/B This universal fit air filter increases horsepower and Classic design with chrome-plated top. Includes filter, gasket, hardware, fuel economy by up to 16% over other filters. Reus- and PCV adapter. able – just clean and re-oil. You need never buy For vehicles with 25⁄8" or 31⁄16" diameter neck. another filter...... KY9798...... ea...... 29.95 Round. Made of cotton fiber. Blue. 14" diameter, 3" tall...... 48026...... ea...... 24.95

E1040 E1570 Replacement Filter for Above Air Cleaner 10" × 2" ...... 6479...... ea...... 8.95 Air Filters – K&N® Replacement K&N manufactures the world’s best air filter. A high-flow, washable Air Cleaner Adapter filter that’s proven to be the best. Economically and ecologically sound Allows you to use an air cleaner with a 51⁄ " diameter because you don’t throw it away. You buy it once, clean and re-oil it 4 neck with a carburetor that has a 25⁄ " diameter neck. No again and again. Replaces stock elements and is street legal. 10-year / 8 1 million mile manufacturer’s limited warranty. more fit problems when changing carburetors. Made of high-impact, heat-resistant plastic for durability. ’63 - ’69 ’63 - ’65 F-Series 292 1/B; ’66 - ’67 F-Series 300 1/B; ...... MRG6407...... ea...... 4.95 ’68 - ’69 F-Series 240 1/B...... E1040...... ea...... 42.95 Air Cleaner Assembly – ’68 F-250 240 1/B...... E1030...... ea...... 44.95 Ford Motorsport ’68 - ’72 ’68 300 1/B, 360 / 390 2/B; Die-cast with black satin finish and Ford logo. ’69 F-100 / F-350 360 / 390 2/B, F-250 360 2/B, F-250 390 Round. 13" diameter. Includes filter, bolt, wing with Rochester carburetor; nut, 2 bolts, 2 nuts, 2 locking rings, and crank- ’70 - ’71 F-100 302 2/B, F-Series 360 / 390 2/B; ’72 F-Series 302 / 360 / 390 2/B. case vent hose elbow. 131⁄4" × 111⁄2" × 27⁄8". ’60 - ’72 All with 2/V or 4/V carburetor...... E1570...... ea...... 49.95 ...... M9600L302...... ea...... 129.95

www.autokrafters.com 74 Valve Covers Continued

“Cal Custom” Style Air Cleaner Ford Racing Continued 14" air cleaner with an aluminum finned lid, air filter and bottom plate. ’62 - ’72 289, 302, 351W. 1 Provides a clean look with no visible mounting nut. Lid has a ⁄4 – 20 nut Chrome. Includes oil cap and grommet. attached underneath that will require shortening the carburetor stud. NOTE: Cannot be used with EFI or with roller rockers. ’64 - ’72 ...... C5ZZ-9600AFK...... ea...... 84.95 ...... M6582B303R...... pr...... 59.95

80577

Air Cleaner Mounting Gaskets ’68 - ’72 302, 390...... 66248...... pr...... 2.95 VS13049R VS13264T

Valve Covers VS50033C1

Valve Cover Gasket Sets ’68 - ’72 302. C8OZ-6A582BL C8OZ-6A582C Rubberized cork. "Power by Ford" ...... 80577...... pr...... 9.95 ’68 - ’72 302. Fel-Pro® Dark blue...... C8OZ-6A582BL...... pr...... 59.95 ’58 - ’72 F-Series 352, 360, 390, 427, 428. Chrome...... C8OZ-6A582C...... pr...... 99.95 Rubber...... VS13049R...... set...... 18.95 ’62 - ’72 260, 289, 302. Fits “302 Powered by Ford” valve cover above. Perma-Dry Plus...... VS13264T...... set...... 39.95 ’68 - ’72 F-Series 240, 300. Cork...... VS50033C1...... ea...... 9.95 VC240/300CH VC352/428CPH ENGINE / AIR CLEANER / VALVE COVERS ENGINE / AIR CLEANER VALVE

VC352/428CH 19330 19327 9804 Chrome Aftermarket Corteco® ’68 - ’72 240, 300. ’65 - ’72 ’65 - ’66 352; ’68 - ’72 360, 390. With baffles...... VC240/300CH...... ea...... 49.95 ...... 19330...... ea...... 14.95 ’58 - ’72 352, 360, 390, 427, 428. ’68 - ’72 302. Use on engines with oil fill in valve cover and a PCV hole. Rubber...... 19327...... pr...... 14.95 ...... VC352/428CPH...... pr...... 149.95 ’62 - ’72 352, 360, 390, 406, 427, 428. With baffles...... VC352/428CH...... pr...... 59.95 ’63 - ’72 260, 289, 302, 351W. With baffles. OEM height. Hardware and gaskets not in- M6680A302 M6680A cluded...... 9804...... pr...... 49.95 Valve Cover Bolts – Ford Motorsport For fast removal of valve covers. Chrome ends feature Ford oval logo. Amount required varies with each vehicle. Fits all chrome V8 valve covers. 6A582-302 6A582-302P ...... M6680A302...... pr...... 9.95 Fits most V8s except FE. Small-block “Powered by Ford” 1⁄4" – 20 thread. Package of 4. ’62 - ’72 “302 Powered by Ford.” ...... M6680A...... pkg...... 10.95 ...... 6A582-302...... pr...... 149.95 Polished...... 6A582-302P...... pr...... 199.95 Chrome Engine Dress-up Kit Includes 2 chrome valve covers, 2 valve cover gaskets, 12 chrome wing bolts, 1 Ford Racing chrome push-on breather and grommet, Features Ford Racing logo on top. 2 chrome 4-wire looms, 2 chrome 2-wire dividers, 12 chrome hold-down clamps ’62 - ’72 289, 302, 351W. and 1 rubber grommet for PCV hole. Ideal starter kit. Black with red lettering. For PCV grommet, see part #M6892F on the next page. NOTE: Not legal for use in California on pollution controlled vehicles...... M6582L302...... pr...... 119.95 ’64 - ’72 289, 302, 351W...... 9833...... kit...... 84.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 75 ENGINE / MOTOR MOUNTS

EV68C EV50 V158

PCV Valves Replacement, not genuine Ford. ’65 - ’66 F-Series all...... EV68C...... ea...... 2.95 ’67 - ’72 6-cylinder...... EV68C...... ea...... 2.95 ’67 - ’72 352, 360, 390...... EV50...... ea...... 3.95 ’68 - ’72 302...... EV68C...... ea...... 2.95 ’70 - ’72 6-cylinder...... V158...... ea...... 4.95 Engine Overhaul Gasket Set PCV Hose Elbow Gaskets in overhaul kit includes the following: Genuine Ford. • 2 air pump tube gaskets • 1 crank case vent gasket ’68 - ’72 ’68 - ’71 390; ’68 - ’72 302. • 1 distributor o-ring • 2 exhaust seals ...... C8AZ-6767B...... ea...... 10.95 • 1 fuel pump gasket • 2 head gaskets • 2 intake (1962-76) gaskets • 2 intake (1977-82) gaskets • 1 front intake end gasket • 1 rear intake end gasket • 1 oil filter mount gasket • 1 oil pan drain plug washer • 2 oil pan side rail gaskets • 2 oil pan end gaskets E7AZ- C7AZ- C8AZ- C8AZ- • 2 oil pump mount gaskets • 2 rear main gaskets 6A892A 6A892B 6A892D 6A892 • 1 thermostat housing gasket • 1 timing cover gasket • 1 timing cover seal (1962-79) • 1 timing cover seal (1980-82) PCV Grommets • 2 valve cover gaskets • 16 valve seat (umbrella) gaskets Please give year and engine size when ordering. • 4 water pump gaskets ’64 - ’72 6- or 8-cylinder with oil fller cap that has 1" hole. For OE replacement and high-performance applications...... E7AZ-6A892A...... ea...... 3.95 ’62 - ’72 221, 260, 289, 302. ’67 - ’70 352, 360, 390. Twist-in...... 7120...... set...... 69.95 ...... C7AZ-6A892B...... ea...... 3.95 ’68 - ’72 302. Genuine Ford...... C8AZ-6A892D...... ea...... 2.95 ’68 - ’72 6- or 8-cylinder with oil filler cap that accepts elbow. Motor Mounts and Swap Kits ...... C8AZ-6A892...... ea...... 2.95 PVC and Oil Cap Grommet Kit ’62 - ’72 For use with small-block or big- block engines...... M6892F...... kit...... 6.95 TAAA-6039ANOS B5S-6038A

Complete Engine Gasket Sets A typical set includes: • head gaskets 2290 2289 2329 • intake manifold gaskets • exhaust header gaskets Motor Mounts • intake manifold end seal ’53 - ’56 F-100 6- or 8-cylinder. Requires 1 per vehicle. • timing cover seal Lower...... TAAA-6039ANOS...... ea...... 3.95 Upper...... B5S-6038A...... ea...... 19.95 • oil pan and oil pan drain plug gaskets ’68 - ’72 360, 390. Typical Illustration • water outlet gasket LH...... 2290...... ea...... 14.95 • water pump cover, water pump-to-plate and water pump plate-to-engine RH...... 2289...... ea...... 14.95 block gaskets ’69 - ’72 302 4WD...... 2329...... ea...... 19.95 • oil pump inlet tube gasket • exhaust crossover inserts • fuel pump mounting gasket • valve cover gaskets • oil pump-to-block gasket • rear main bearing seals • distributor mounting gasket 2368 2367 • crankcase vent tube gasket Mounts for Engine Swap Mount Kits ’53 - ’54 239 / 256 with standard bore head gaskets. ’53 - ’64 Use with engine swap mount kit part #TD4977 (see next ...... 320325...... set...... 54.95 page). ’56 - ’64 ’56 F-250 272; ’56 - ’58 F-100 272; ’58 - ’64 F-100 292; ’64 LH...... 2359...... ea...... 21.95 F-250 292...... 32412CS...... set...... 94.95 RH...... 2358...... ea...... 21.95 ’58 - ’72 352, 390...... 32361CS...... set...... 89.95 ’53 - ’64 Use with engine swap mount kit part #TD9313 (see next ’62 - ’72 ’62 - ’65 260; ’63 - ’68 289; ’68 - ’72 302. page)...... FS2804...... set...... 109.95 LH...... 2368...... ea...... 29.95 RH...... 2367...... ea...... 29.95

www.autokrafters.com 76 Headers td4977 Attention California customers: California vehicle code sections 27156 and 38391 prohibit the advertising, offering for sale, or installation of any device which modifies a vehicle’s emission control system unless exempted. The headers in this catalog have not received an exemption from these code sections and are not legal for sale or use in California on vehicles originally equipped with catalytic converters. It is illegal, except for racing vehicles td4145 which may never be driven upon a highway, to remove or otherwise render inoperative any emission control device on regulated motor vehicles.

td9313 D664

Doug’s Headers – Ceramic Coated td4849 ’69 - ’72 F-250 2WD 302. Will not fit trucks with air injection cylinder heads, C6 or M/T. Tube size: 15⁄8", collector size: 21⁄2"...... D667...... set...... 549.95 ’65 - ’72 F-Series 2WD 352 / 360 / 390 A/T or M/T. Tube size: 13⁄4", collector size: 3". td9720 ...... D603...... set...... 549.95 ’68 - ’72 F-250 4WD 360, 390. Tube size: 13⁄4", collector size: 3". Engine Swap Mount Kits ...... D664...... set...... 549.95 ENGINE / SWAP KITS HEA D ERS NOTE: These kits require extensive modification and are not recommended for the inexperienced restorer. ’53 - ’64 For installing a 351M, 400 and post-’73 351C. Crossmember mount is adjustable from 24" to 37". Requires some welding. Also requires motor mount #s 2358 and 2359, listed on previous page. 6903 6905 ...... TD4977...... kit...... 99.95 ’53 - ’64 For installing 289, 302, 351W. Kit includes LH and RH adapter wings, motor mount pads, frame brackets and hardware. No welding required...... TD4145...... kit...... 114.95 ’53 - ’64 For installing a 429, 460. Crossmember mount. Welding is required. Also requires 6904 6906 motor mounts #s 2367 and 2368 on the previous page...... TD9313...... kit...... 124.95 ’53 - ’72 For installing a 260, 289, 302 into pickups with frame rails ® from 24" to 37" wide. Hooker Competition Series Headers Made from 16 gauge material, which is about 30% heavier but welds Center-to-center between perches is 171⁄4". This universal crossmember-style motor mount kit includes a cross tube easier and will last slightly longer under certain extreme climatic condi- made of heavy duty .114" thick tubing, 2 end caps and 2 tions. They are finished with a heat-cured, high heat-resistant black mount pads. To install, measure the distance between the paint, or optionally with Hooker’s Metallic Thermal Barrier Coating (call frame rails, cut the cross tube to fit and bolt or weld the end for more information). caps to the cross pipe. ’65 - ’72 F-Series 2WD 352 / 360 / 390, except A/T with floor shift...... TD4849...... kit...... 149.95 Tube size and length: 13⁄4" × 24". Collector size and length: ’65 - ’72 For installing a 429, 460 into a 2WD pickup. 21⁄2" × 9". Includes mount brackets and bushings. No welding required. NOTE: Will not fit GT heads; will only fit 16-bolt heads...... TD9720...... kit...... 179.95 ...... 6903...... pr...... 299.95 ’67 - ’72 F-250 4WD 352 / 360 / 390, except M/T with column shift or Oil Filter Relocation Kit A/T with floor shift. 3 Used when installing headers on certain Tube size and length: 1 ⁄4" × 27". Collector size and length: 1 models when stock oil filter placement inter- 2 ⁄2" × 8". NOTE: Will not fit GT heads. feres with headers. Relocates the oil filter ...... 6905...... pr...... 269.95 to an easily accessible location inside the ’69 - ’72 F-100 2WD 292 / 302, except A/T with floor shift. engine compartment for quick and easy filter Tube size and length: 15⁄8" × 21". Collector size and length: changes. For single remote oil filter mounting. 21⁄2" × 9". Solid brass fittings and ferrules. Includes everything needed for quick NOTE: Will fit Dart / Windsor head. and easy installation (except oil filter): spin-on oil bypass adapter, rubber ...... 6904...... pr...... 249.95 o-ring, 2 sections of 30" neoprene hose with male and female fittings ’69 - ’72 F-100 4WD 352 / 360 / 390, except M/T with column shift or installed, 2 hose adapter fittings, remote filter base,3 ⁄4" threaded nipple, A/T with floor shift. 3 3 sheet metal screws #14 × 3⁄4", plus instructions. Tube size and length: 1 ⁄4" × 26". Collector size and length: 1 ...... MRG7682...... ea...... 69.95 2 ⁄2" × 9"...... 6906...... pr...... 279.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 77 Exhaust ENGINE / HEA D ERS EXHAUST

6823 6809

Hooker® Super Competition Series Headers Made from lightweight 18 gauge mild steel tubing with “tuned” lengths for 51A-18529P 51A-18529B 51A-18529A maximum performance. They are finished with a heat-cured, high heat- resistant black paint, or optionally with Hooker’s Metallic Thermal Barrier Exhaust Deflectors Coating (call for more information). Stainless steel. NOTE: Due to size, additional shipping charges apply. P/S applications ’53 - ’72 Plain...... 51A-18529P...... ea...... 16.95 require drop-off bracket #88303 shown below. With Ford script...... 51A-18529A...... ea...... 16.95 With V8 logo...... 51A-18529B...... ea...... 16.95 ’65 - ’72 F-Series 2WD 240, 300; F-Series 4WD 300. Tube size and length: 15⁄8" × 36". Collector size and length: 21⁄2" × 6"...... 6823...... pr...... 509.95 ’65 - ’72 F-Series 2WD 352, 360, 390. Tube size and length: 13⁄ " × 26". Collector size and length: 4 c5tz-9430a E3tz-9426D 21⁄2" × 10"...... 6809...... ea...... 509.95

Hooker® Competition Series Exhaust Systems Mandrel bent, not press bent. Designed to fit Hooker Competition header or manifold-back applications. Large diameter 21⁄4" O.D. 16-gauge c5tz-9431a steel tubing for improved efficiency, less back pressure and longer life. Exhaust Manifolds Mufflers are NOT included. ’65 - ’67 352. Runs down RH side between the frame and drive shaft. 2" openings. RH...... C5TZ-9430A...... ea...... 119.95 ’65 - ’72 ’65 - ’72 F-100 / F-250 2WD 352, 360, 390; ’67 - ’72 F-350 ’65 - ’72 ’65 - ’71 F-250 / F-350 240; 2WD 352, 360, 390. ’65 - ’72 F-100 240; NOTE: Will not fit ’68 - ’72 with Camper Special gas tank. ’65 - ’72 F-100 / F-250 / F-350 300 with or without heat riser Manifold duals will not fit ’65 - ’67. (California)...... E3TZ-9426D...... ea...... 199.95 Header back...... 16562...... ea...... 219.95 ’68 - ’72 F-Series 360 / 390. ’69 - ’72 F-100 4WD 352, 360, 390. LH...... C5TZ-9431A...... ea...... 119.95 NOTE: Manifold duals will fit ’65 - ’72. RH. 2" openings...... C5TZ-9430A...... ea...... 119.95 Header back...... 16564...... ea...... 219.95

Exhaust Manifold Gasket Set Power Steering Drop-off Bracket Made of graphite facing mechanically bonded to perforated metal. Most Required for the installation of certain headers on vehicles with power suitable for sealing hot exhaust gasses. steering. ’68 - ’72 302...... 18020...... pr...... 8.95 ’62 - ’71 ...... 88303...... ea...... 19.95

133901 9802

Manifold-to-Muffler Inlet Pipe Gaskets 8913 8912 8912A ’53 - ’72 8-cylinder...... 133901...... ea...... 4.50 Locking Header Bolts ’63 - ’72 6-cylinder...... 9802...... ea...... 2.95 3⁄8" – 16. Double hex heads. 16 bolts per kit.

Small-block ’53 - ’72 3⁄4" long...... 8913...... kit...... 59.95 1" long...... 8913A...... kit...... 64.95 Big-block 3 ’53 - ’72 ⁄4" long...... 8912...... kit...... 59.95 Crossover Exhaust Pipe 1" long...... 8912A...... kit...... 69.95 2-piece assembly. Reproduction; not N.O.S. ’55 - ’64 F-Series V8...... B5A-5267ANOS...... ea...... 49.95

www.autokrafters.com 78 Complete OEM Engine Hardware Kits Exact OEM. Kits include hardware for valve covers, oil pan, timing cover, water pump, crank pulley, thermostat housing, Exhaust Manifold Bolt Kit distributor, carburetor, exhaust manifold, fuel pump, oil filter adapter, engine tag, Manufactured in the USA to OEM specifications. AMK Products reintro- Typical Engine Hardware Kit and ignition coil. duces Ford’s Ramp-Lok® exhaust manifold bolt. This bolt was original equipment on all Ford engines in 1966 - 67. ’58 - ’66 352 / 390 with standard exhaust manifolds...... B8AE-327...... kit...... 119.95 ’68 - ’72 302...... RLK5...... kit...... 24.95 ’67 - ’72 352 / 390 with standard exhaust manifolds...... C6AE-328...... kit...... 119.95 ’68 302. Without A/C...... C8OE-326...... kit...... 99.95 With A/C...... C8OE-338...... kit...... 99.95 Exhaust Manifold Stud and Nut Kit Attaches pipe to exhaust manifold. ’68 - ’70 ’68 F-100 302; ’69 - ’70 302 all. Engine Wiring / Electrical ...... SK2...... kit...... 14.95 NOTE: Electrical parts are non-returnable once installed. We will replace defective units only.

Button Head Screw Hex Head Screw Socket Head Screw Billet Distributors These new plug-and-play distributors allow you to upgrade your outdated points or stock electronic distrib- utor with a performance-proven distributor that features Small Head Screw 12 Point Screw the patented Ignitor II electronic ignition module and a CNC machined 6061 T-6 polished billet housing and Complete Stainless deck. PerTronix electronics are also compatible with Engine Bolt / Screw Kits any inductive ignition system coil, but high RPM perfor- Kits include fasteners for distributor, fuel pump, oil pan, intake, thermo- mance can be improved when used with a low resis- stat housing, timing chain cover, valve covers and water pump. D130700 tance (0.6 ohm) Flame-Thrower II coil. With Cast With Sheet Metal If you’re using a multi-spark CD ignition box, no problem; the Flame- Valve Covers Valve Covers Thrower billet distributor is compatible. Additional features include a 289 - 302 Kits tempered .500" diameter shaft with low torsion displacement; an upper With passenger side water pump inlet. roller bearing and lower self-lubricating oil impregnated copper powder

ENGINE / EXHAUST / WIRING ELECTRICAL ENGINE / EXHAUST Button and socket head...... TS6-0886...... TS6-0081...... 42.95 metal bushing and a durable machined heat-treated gear. Distributors Hex head ...... TS6-0887...... TS6-0925...... 42.95 come with a factory set performance curve, a mechanical advance Socket head ...... TS6-0888...... TS6-0926...... 56.95 limiting adjustment. Black cap. Small hex ...... TS6-0889...... TS6-0927...... 149.95 260, 289, 302...... D130700...... ea...... 219.95 Twelve point ...... TS6-0890...... TS6-0929...... 149.95 351C, 351M, 400, 429, 460...... D132700...... ea...... 219.95 352 - 390 Kits Button and socket head...... TS6-0690...... TS6-0600...... 34.95 Replacement Cap for the Above Hex head ...... TS6-0691...... TS6-0601...... 44.95 Black...... D650700...... ea...... 29.95 Socket head ...... TS6-0692...... TS6-0602...... 45.95 Replacement Rotor for the Above Small hex ...... TS6-0693...... TS6-0632...... 124.95 Black...... D660701...... ea...... 9.95 Twelve point ...... TS6-0694...... TS6-0633...... 124.95

Underhood Hardware Kits ’61 F-100. 195 pieces...... FO111...... kit...... 101.95 ’72 F-100. 245 pieces...... FO110...... kit...... 168.95 D1350 D1352

Auto Krafters, Inc. HEI Distributors Gold Card Club Performs misfire-free up to 7,500 RPM, nearly 3,000 RPM higher than • Save 10% on our already low prices* the original factory HEI. Finally, a coil and module engineered to work • Get expedited order shipping together. Limited 1-year manufacturer’s warranty. • Free Shipping* 260, 289, 302. JOIN THE AUTO KRAFTERS Black cap...... D1350...... ea...... 239.95 GOLD CARD CLUB TODAY! Blue cap...... D1352...... ea...... 234.95 Ask your salesperson for more information! Replacement Caps for the Above *Some exclusions apply. Black...... D4050...... ea...... 29.95 Blue...... D4052...... ea...... 29.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 79 ENGINE / WIRING ELECTRICAL Ignitor Electronic Ignition Systems Ignitor I® Improvement over points in current fall time for in- creased coil output. Features rotating cobalt mag- nets which trigger a Hall Effect integrated circuit. Will trigger most multi-spark CD ignitions. Available for 6- and 12-volt negative and positive ground systems. Use with Flame-Thrower™ 40,000-volt coil for opti- mal performance. 40011 40501 45001 45011 ’53 - ’72 6-cylinder with single-point Motorcraft® distributor. Use with #40501 (chrome) or #40511 (black) coils. Flame-Thrower Ignition Coils ...... 1261...... ea...... 69.95 These high performance ignition coils replace most canister type coils ’54 - ’56 Y-block engines only. in distributor-type induction ignition systems. Maximizes energy and ...... 1282...... ea...... 69.95 reliability over the full RPM range, enables larger plug gaps for greater ’57 - ’72 V8 with single-point distributor. fuel efficiency and more power, delivers an average of 15% more spark Use with #40001 (chrome) and #40011 (black) coils. energy and voltage, and fits existing brackets. Legal in all 50 states. 90- ...... 1281...... ea...... 74.95 day manufacturer’s warranty. ’60 - ’72 V8 with dual-point distributor. Use with #40001 (chrome) and #40011 (black) coils. Flame-Thrower I Without vacuum advance. 40,000 volt...... 1281D...... ea...... 74.95 ’53 - ’72 8-cylinder. With advance distributor. 1.5 ohms resistance. Oil filled. Use with Ignitor ignition ...... 1281DV...... ea...... 74.95 system #1281. ’62 - ’64 6-cylinder. Not for use with dual point distributor. Chrome...... 40001...... ea...... 39.95 Use with #40501 (chrome) and #40511 (black) coils. Black...... 40011...... ea...... 34.95 ...... 1266...... ea...... 69.95 ’53 - ’72 6-cylinder except V6. ’63 - ’67 6-cylinder with single-point Holley® distributor. 3.0 ohm. Use with Ignitor ignition system #1261. Use with #40501 (chrome) or #40511 (black) coils. Chrome...... 40501...... ea...... 39.95 ...... 1266...... ea...... 69.95 Black...... 40511...... ea...... 34.95 ’66 - ’72 ’66 - ’69 200 with smog pump; ’68 - ’72 6-cylinder (except V6) Flame-Thrower II ® with single-point Motorcraft distributor. 45,000 volt. Use with #40501 (chrome) or #40511 (black) coils. ’53 - ’72 6- and 8-cylinder...... 1261...... ea...... 69.95 0.6 ohms resistance. Ignitor II® Chrome...... 45001...... ea...... 44.95 Has many of the same great features of the Ignitor I, Black...... 45011...... ea...... 39.95 but it’s smarter. The Ignitor II senses the coil current levels and uses a powerful microcontroller to control dwell period for the best possible spark over the entire RPM range, thus reducing misfires and improving engine performance. Ignitor II systems develop up to 4 times more energy between 3,000 and 5,000 RPMs than standard ignition systems. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil and module life. Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay. Senses startup and develops more energy for Flame-Thrower Spark Plug Wires quicker, easier starting. Built-in reverse polarity and over-current protec- These high performance, stock-look wires have a low 500 ohm/foot resis- tion shuts down the system, preventing component damage. tance. Silicone jackets are used to resist high temperatures, moisture, Use with Flame-Thrower II™ 45,000-volt coil for optimal performance. oil, and chemicals. Manufacturer’s lifetime warranty. Made in the USA.

® ’53 - ’72 6-cylinder with singe-point Motorcraft distributor. 7 mm Wires ...... 91261...... ea...... 99.95 ’62 F-100 / F-250 8-cylinder. ’57 - ’72 V8 with single-point distributor. No lettering. Fits original wire looms. Has straight plug angle ...... 91281...... ea...... 99.95 and 90º distributor angle. ’60 - ’72 V8 with dual-point distributor...... SPW2...... set...... 49.95 Without vacuum advance. ’65 - ’72 ’65 - ’68 289, 302, 330, 352, 390; ...... 91281D...... ea...... 99.95 ’69 302, 351; With vacuum advance. ’70 - ’72 302...... SPW1...... set...... 49.95 ...... 91281DV...... ea...... 99.95 ’69 - ’72 360, 390. ’62 - ’64 6-cylinder with single-point distributor. No lettering. Fits original wire looms. Has straight plug angle ...... 91266...... ea...... 99.95 and 90º distributor angle. ’63 - ’67 6-cylinder with singe-point Holley® distributor...... SPW2...... set...... 49.95 ...... 91266...... ea...... 99.95 ’66 - ’72 ’66 - ’69 200 with smog pump; ’68 - ’72 6-cylinder except 8 mm HEI Wires V6. With single-point Motorcraft® distributor. For use with HEI distributors. Straight boot...... 91261...... ea...... 99.95 221, 260, 289, 302...... SPW3...... ea...... 54.95

www.autokrafters.com 80

B5A-12044A

7HA-12106A B7A-12106A DH6 B7AZ-12106A Distributor Caps Plain black, like original. C4DZ-12043A C4DZ-12043S ’53 - ’69 6-cylinder. Aluminum contacts.. 7HA-12106A...... ea...... 9.95 ’67 - ’72 V8. Ignition Coil Brackets Premium quality with brass contacts. No logo. ’54 - ’64 Y-block 8-cylinder.... B5A-12044A...... ea...... 5.95 ...... B7A-12106A...... ea...... 12.95 ’65 - ’72 V8. Aluminum contacts.. DH6...... ea...... 6.95 Black...... C4DZ-12043A...... ea...... 14.95 ’67 - ’72 V8. Stainless steel...... C4DZ-12043S...... ea...... 18.95 Autolite® logo. With aluminum contacts...... B7AZ-12106A...... ea...... 29.95

Boot Distributor Hold-down Clamp Detail Ford Racing. Chrome. Includes installation bolt.

ENGINE / WIRING ELECTRICAL Ignition Wire Set – Taylor Streethunder V6, V8 except FE.... M12270A302...... ea...... 9.95 8 mm black custom-fit wire set. These are a little longer than stock wires with straight boots on the spark plug ends and 180º socket-style distrib- utor boot and terminal. ’60 - ’70 352, 360, 390, 406, 427, 428...... SPW51052...... set...... 49.95

72600

® Points Eliminator Kit By Accel Ignition Wire Sets Puts an end to replacing points while improving performance and fuel ’64 - ’70 ’64 8-cylinder all; ’65 - ’70 352 / 360 / 390 all. efficiency. This system uses special electronic circuitry and an infrared ...... 72605...... set...... 74.95 signal that allows ignition timing to be stable from 1 to 10,000 RPM. The ’69 - ’72 302. Thermal Clad-based surface mount allows for maximum dependability F-100...... 72600...... set...... 79.95 and long life. Can be installed with simple hand tools. F-250, F-350...... 72610...... set...... 59.95 ’57 - ’72 V8 with Motorcraft® single-point distributor. ’71 - ’72 F-Series. 352...... 72605...... set...... 74.95 ...... 2020...... kit...... 75.95 360, 390...... 72600...... set...... 79.95

Spark Plug Wires ’65 - ’66 F-100 / F-250 390 without smog...... C5AZ-12259P...... set...... 59.95 ’67 F-Series 6-cylinder.. C7AZ-12259B...... set...... 34.95 ’67 F-100 / F-250 390. Without smog...... C7OZ-12259C...... set...... 59.95 With smog...... C7OZ-12259F...... set...... 49.95 dg313a b6a-12019 ’72 6-cylinder...... D1AZ-12259B...... set...... 34.95 Ignition Coils ’53 - ’72 E-Tron. Black with brown top. Meets or exceeds OEM specifications. Heavy duty replacement, does not look like original...... DG313A...... ea...... 18.95 ’65 - ’72 Except with transistorized ignition. Reproduction. Yellow top. 2-year manufacturer’s warranty...... B6A-12019...... ea...... 34.95 Ford Racing Blue with 45º angle boot. 9 mm diameter. ’68 - ’72 302...... M12259C301...... set...... 59.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 81 ENGINE / WIRING ELECTRICAL

B6A-12297A B8Q-12297A B5C-14440 Spark Plug Wire Separators ’57 - ’72 6-cylinder (requires 1 per vehicle) and V8 (requires 2 per Horn Relay-to-Horn Wiring vehicle). ’53 - ’54 ...... FAF-14440...... ea...... 16.95 8 prongs, 4 slots...... B6A-12297A...... ea...... 1.50 ’55 ...... B5C-14440...... ea...... 9.95 ’65 352. On valve cover. Requires 2 per vehicle. Has 7 to 8mm openings. Headlamp Wiring ...... B8Q-12297A...... ea...... 2.95 ’68 - ’72 F-Series 360, 390; ’69 - ’72 F-100 302. On valve cover. Requires 2 per vehicle. Has 7 to 8mm openings...... B8Q-12297A...... ea...... 2.95

12297SETRD B6C-11653A Crossover Wires Spark Plug Wire Separators Sets ’53 - ’55 6- and 8-cylinder. Made from ABS plastic. Includes 2 valve cover-mounted separators and With turn signals and horn. 2 regular separators...... B4TZ-13A006A...... ea...... 29.95 ’56 F-100...... B6C-11653A...... ea...... 17.95 Black...... 12297SETBK...... set...... 9.95 Blue...... 12297SETBL...... set...... 12.95 Red...... 12297SETRD...... set...... 12.95

Spark Plug Wire Mounting Grommets Bucket Wires Set of 4. Rubber covered. ’54 - ’64 239, 272, 292...... FAA-12297K...... set...... 19.95 ’56 ...... 0A-13076...... ea...... 17.95 Harnesses ’64 F-Series 6- or 8-cylinder...... C2TZ-14290...... ea...... 129.95 ’65 - ’66 F-100 / F-250 2WD 8-cylinder. BF42 45 ...... C5TZ-14290...... ea...... 129.95 Spark Plugs ’65 - ’72 ’65 - ’67 352; ’68 - ’72 302, 360, 390. Firewall-to-Engine Gauge Feeds Motorcraft®...... BF42...... ea...... 2.50 ’65 F-100 8-cylinder...... C5TZ-14289...... ea...... 79.95 ’68 - ’72 ’68 - ’69 360; ’71 - ’72 360; ’68 - ’72 390. ’66 F-100 8-cylinder...... C6TZ-14289...... ea...... 79.95 Autolite®...... 45...... ea...... 1.29 ’67 F-100 8-cylinder...... C7TZ-14289...... ea...... 64.95

Spark Plug Metal Shield ’54 - ’64 Requires 4 per vehicle...... B5A-12299A...... ea...... 5.95 FAK-14401

Dash or Cowl Wiring Harnesses Includes wiring diagram. Engine Compartment Lamp ’53 8-cylinder...... FAK-14401...... ea...... 229.95 This dome-shaped cover with bulb included comes with wire and is an ’54 8-cylinder...... FDE-14401...... ea...... 169.95 exact copy of the original Ford kit. ’55 8-cylinder...... B5C-14401...... ea...... 249.95 ’56 8-cylinder...... B6C-14401...... ea...... 149.95 ’57 - ’66 F-100...... C2RZ-15A700A...... ea...... 24.95

www.autokrafters.com 82 Dome Lamp Wiring Harnesses ’64 F-Series...... C4TZ-13782...... ea...... 23.95 ’65 - ’66 F-Series...... C5TZ-13782...... ea...... 23.95 ’67 F-Series...... C7TZ-13782...... ea...... 23.95

C5TZ-14305 C7TZ-14305 Alternator Wiring Harnesses C7TZ-14405 ’65 - ’66 F-100 8-cylinder...... C5TZ-14305...... ea...... 64.95 ’67 F-100 8-cylinder...... C7TZ-14305...... ea...... 64.95 Taillight Wiring ’53 - ’55 With turn signal...... B5C-14405...... ea...... 67.95 ’56 With turn signal...... B6C-14405...... ea...... 27.95 Taillight Crossover Wire 45" long. 7RA-14432 ’53 - ’55 ...... B5C-14424A...... ea...... 13.95 Miscellaneous Wiring Taillight Harnesses ’53 Temperature sender crossover wire. ’64 F-100 / F-250 2WD 6- or 8-cylinder long bed. V8...... 7RA-14432...... ea...... 6.95 ...... C2TZ-14405...... ea...... 139.95 ’53 - ’54 Starter solenoid to junction box. ’65 - ’66 F-100 / F-250 2WD 8-cylinder long bed...... FAA-14439A...... ea...... 39.95 ...... C5TZ-14405...... ea...... 129.95 ’56 Overdrive wiring: solenoid to relay next to firewall. ’67 F-100 2WD 6- or 8-cylinder long bed...... B6C-14382A...... ea...... 19.95 ...... C7TZ-14405...... ea...... 159.95

ENGINE / WIRING ELECTRICAL Complete Wiring Harness ’53 - ’55 F-100 215, 223, 239, 256, 272, 292, 302...... WH53...... ea...... 499.95

Parking Lamp / Taillight Socket Sealed socket and correct ends. Made exactly like the original. 12 volt. 64FWPR 376914S 2 terminals. Wiring Harness Plug Retainers ’53 - ’60 ...... B6A-13234A...... ea...... 15.95 For headlamp feed or gauge feed. Retains 13⁄16" × 5⁄8" plug in firewall. ’53 - ’72 ...... 64FWPR...... pr...... 5.95

Wiring Straps ’53 - ’72 ...... 376914S...... ea...... 50 Kit of 20...... AK114B...... kit...... 8.00 7c-13410 baaa-13410

Parking Lamp Wiring Cross- Wiring Repair Kit B-14564 59A-14487 section Includes 2 wires and retainers and 1 spring. Wiring Connectors ’53 - ’56 ...... 7C-13410...... kit...... 2.95 Single splice...... B-14564...... ea...... 95 Socket and Wire Assembly (for Turn Signals) Double splice (4-way). Replacement...... 59A-14487...... ea...... 2.50 ’53 - ’56 ...... BAAA-13410...... ea...... 6.95

SW663 HR127 C4TZ-14305 Water Temperature Sender ’66 - ’69 ’66 - ’69 240 / 300 / 352 / 360 / 390 from chassis #751,001; ’69 F-100 2WD 302...... SW663...... ea...... 9.95 Feed-to-Generator Wiring Harness ’64 F-100 8-cylinder...... C4TZ-14305...... ea...... 119.95 Horn Relay ’67 - ’72 F-Series...... HR127...... ea...... 19.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 83 ENGINE / WIRING ELECTRICAL

Wiring Terminal Kit This 175-piece kit is an assortment of the 18 most popular solderless Horn – Low Tone insulated terminals and connectors. Comes in a clear plastic display box ’67 - ’72 F-Series...... C7TZ-13833A...... ea...... 34.95 with easy-to-locate dividers...... TK175...... kit...... 10.95

MH8075 MH8125

Wire Harness Wrap – Sold by the Roll 3⁄4" wide...... MH8075...... ea...... 14.95 13⁄16" wide...... MH8125...... ea...... 14.95 A/C Compressor Switch and Bracket ’67 - ’72 ...... C8SZ-2979A...... ea...... 36.95 Vinyl Electric Tape Automotive super 33+, flame-retardant, cold- and- weather resistant. Use at no more than 600 V and 176º F. Premium quality. Sold by the roll, 1A-14603B each contains approximately 100'. Made in the USA. 3⁄ " × 52' roll ...... 3M6133...... ea...... 3.95 4 ’57 - ’60 Liquid Electrical Tape Dielectric coating seals out moisture for trouble-free electrical ’53 - ’56 ’61 - ’66 connections. Won’t crack, peel or harden. Remains flexible in extreme conditions. Available in Clear (00), Black (01), Red (03), Green (13). Please add color code, where applicable, to the end of the part number when ordering. 4 oz. Black...... LET-01...... ea...... 7.95 Clear (00), Red (03) or Green (13)...... LET- ...... ea...... 1.99

352873-L Wiring Harness Protector Grommets ’53 - ’55 Main wiring loom grommet. MP0364 MP367 ...... 1A-14603B...... ea...... 3.95 ’53 - ’66 Vinyl-coated metal. Protects the wiring harness wherever it passes through sheet metal. Fits into 25⁄32" hole...... 352873-L...... ea...... 3.95 F-Series Wiring Diagrams ’63 ...... MP0364...... ea...... 8.00 ’64 ...... MP0365...... ea...... 8.00 ’65 ...... MP367...... ea...... 8.00 ’66 ...... MP0366...... ea...... 8.00 ’67 ...... MP0368...... ea...... 8.00 ’68 ...... MP0385...... ea...... 12.00 SW24 SW881 sw5163 ’69 ...... MP0386...... ea...... 12.00 Brake Lamp (Stop Lamp) Switches ’53 - ’66 F-Series...... SW24...... ea...... 12.95 ’67 F-Series...... SW881...... ea...... 15.95 ’68 - ’72 F-Series. SM70 SM59T Replacement...... SW5163...... ea...... 8.95

Beltronics™ Performance Meter F-Series Shop Manuals – Printed This Vector FX1 performance computer ’54 - ’55 ...... SM70...... ea...... 29.95 provides performance data when ’56 ...... SM71...... ea...... 29.95 required and is great for any classic or ’57 ...... SM57T...... ea...... 44.95 performance car or truck. Features an ’58 ...... SM58T...... ea...... 49.95 LCD back-lit display, G-meter function ’59 ...... SM59T...... ea...... 49.95 and 6' power cord with a standard plug. No complicated installation; just ’60 ...... SM60T...... ea...... 49.95 ’61 ...... SM61T...... ea...... 54.95 plug in and go! The Vector FX1 gives you feedback before and after ’62 - ’63 Supplement...... SMS62T...... ea...... 19.95 modification on acceleration time, quarter-mile time, breaking distance, ’64 ...... SM64T...... ea...... 49.95 G-force and horsepower. 1-year manufacturer’s warranty. ’65 2 volume set...... SM65T...... set...... 84.95 ...... FX1...... ea...... 99.95 ’66 3 volume set...... SM66T...... set...... 84.95

www.autokrafters.com 84

ENGINE ASSEMBLIES FROM MILD TO WILD ENGINE Don’t overhaul or rebuild that old engine. Replace it with the best. Now you can replace your classic Ford engine with a remanufactured stock premium longblock engine assembly or a new high performance crate engine. Auto Krafters is proud to offer replacement engines from Marshall Engines. For over two decades, they have built superior quality replacement engines for cars and light trucks. They demonstrate market leadership with the introduction of the world’s first dynamometer tested and documented production replacement engines. Customers have racked up over four billion miles on the 200,000 engines they have shipped since 1982. They can build one just for you!

MARSHALL MARSHALL LONGBLOCK BLUEPRINT®

Warranty up to Warranty on street engines 36 months or up to 24 months or 100,000 miles, 24,000 miles, whichever comes first. whichever comes first.

These engines are completely and carefully remanufactured, not just When you order a Blueprint® 347 engine you can be assured that it has rebuilt with new brand-name OE quality parts to achieve performance been thoroughly tested. Rotating assemblies are computer balanced to equal to original equipment. State-of-the-art technology and dedicated within two grams and horsepower is dyno-tested to verify the proper builders provide a quality standard in the engine rebuilding industry. torque and all is documented and sent to you on each one. 100% of the engine is returned to NEW specifications and tolerances. Blueprint® engines are available to you as base or premium units. You Select from the following options: can get most versions of the base engine built up to the intake manifold • The Dyno-tested Longblock with a guarantee of performance on which includes oil pan, valve cover, and a brand new intake. You finish it your engine with a chart from the actual test run. from there. Premium engines are ready for easy installation with ignition, fuel systems, water pump and spark plugs included. • The Premium Plus with Tin which includes the oil pan, timing cover, oil pump, pick-up tube and screen and gasket set. Blueprint® engines feature: • Hand-picked, seasoned 302 blocks • The Premium Longblock comes with adjusted valve train compo- nents, gasket set and new oil pump. • Square and parallel decked • Align honed main bearing bore Longblock engines feature: • Cylinders plateau honed and sonic tested for thickness • Bake cleaned heads, crankshafts and blocks. • New SCAT cast or forged crankshafts and rods • Heads are magnetic particle inspected and include surface decks, • Hastings moly rings new valve springs and a three angle valve job. • Balanced rotating assembly • New OEM pistons. • Melling high volume oil pump • Chemically cleaned rods 100% rebuilt to specifications, checked for • Heavy duty double roller timing set bend and twist with pin bushings replaced. • A choice of cast or aluminum heads • Crankshafts are checked for bend, ground to size with oil hoses cham- • Valve springs fered and journals polished. • Hardened retainers, keepers and push rods • Camshafts are replaced with new or remanufactured ones. Remanu- • Swirl polished intake and exhaust valves factured ones are reground and the journals are polished. Extras include: • Blocks are magnetic particle inspected, decks cleaned and resurfaced • New aluminum intakes as necessary. Bored within .004 of finished size. Finish honed to prop- • 9.5:1 compression er size and finish to match rings. Aligned honed main bearing bore to • Signature series aluminum valve covers assure proper crankshaft clearance. • Brass freeze plugs Let MARSHALL ENGINES build one for you! • Dyno-testing • Shipped with documented torque and horsepower

Ask your salesperson how you can purchase one of these quality engines today!

ORDER TOLL FREE 1 - 800 - 228 - 7346 85 TRANSMISSION / CLUTCH Transmission Transmission Oil Pan Filter For use with #50281 and #40281 oil pans. ’65 - ’72 F-100 / F-250 C4; ’68 - ’72 C6...... 10288...... ea...... 15.95 TC10

Transmission Coolers – Heavy Duty ’62 - ’71 Light service, rated up to 10,000 lbs. 5" × 17" × 3⁄4"...... TC10...... ea...... 34.95 Medium service, rated up to 16,000 lbs. 71⁄2" × 17" × 3⁄4"...... TC16...... ea...... 39.95 Heavy duty, rated up to 20,000 lbs. K6 K8 K7 10" × 17" × 3⁄4"...... TC18...... ea...... 44.95 A/T Filter and Gasket Kits A/T Oil Cooler ’65 - ’69 C4...... K6...... kit...... 8.95 100% aluminum construction and uses em- ’66 - ’72 C6...... K8...... kit...... 8.95 bossed plates sandwiched together to cre- ’70 - ’72 C4...... K7...... kit...... 8.95 ate one of the most efficient oil cooling devices available. Equipped with threaded female pipe threads but does not include a mounting kit, hose or fittings due to the Transmission Cooler Lines custom nature of this installation. Measures 11" × 41⁄2" × 11⁄2". When ordering stainless steel, please add “SS” to the end of the part number. All with A/T and GVW of 13,000 to 16,000 lbs...... 70265...... ea...... 89.95 Original Stainless ’67 - ’70 F-Series. 2 pieces...... FRT6701...... 54.95...... 89.95 ’71 - ’72 F-Series. 2 pieces...... FRT7101...... 54.95...... 89.95

TM9 FM2317 FM2315 Transmission Modulators (Shift Diaphragms) ’64 - ’72 C4 or C6. 1⁄2". 20 thread. Single hose. White stripe...... TM9...... ea...... 15.95 ’65 - ’66 C4 or C6...... C1AZ-7A377B...... ea...... 16.95 Shift Linkage Repair Kit ’72 6- or 8-cylinder. Includes brass eyelets, rubber bushings and metal washers. 12 piece kit. C4. Yellow stripe...... FM2317...... ea...... 14.95 ’53 - ’56 ...... 01A-7354RK...... kit...... 19.95 C6. Black stripe...... FM2315...... ea...... 16.95

C5ZZ-7A194S C5ZZ-7A194C C5ZZ-7A194CD Transmission Oil Pans 50260 40262 50262 No filler hole. Shift improver Kits ’64 - ’72 2WD C4. These kits by B&M Racing and Performance are the easiest way to get Gray...... C5ZZ-7A194S...... ea...... 19.95 Chrome...... C5ZZ-7A194C...... ea...... 24.95 better performance from your automatic transmission. Faster shifts, longer Chrome. Deep...... C5ZZ-7A194CD...... ea...... 29.95 clutch and band life, better fuel economy, and cooler running temperatures are just some of the improvements you will find. Kits include a pan gasket, specialty separator plates, twist drill and step-by-step instructions. You have a choice of two performance parts: heavy duty or street / strip. All it takes is a few hand tools and a few hours to improve your transmission into the solid B&M-tuned unit you want. 50281 40281 ’67 - ’69 C4...... 50260...... kit...... 42.95 Heavy Aluminum Pan Kits ’67 - ’72 C6...... 40262...... kit...... 34.95 Extra deep pans. Kits include drain plug with gaskets, filter extension ’70 - ’72 C4...... 50262...... kit...... 42.95 and hardware. ’65 - ’72 F-100 / F-250 C4. Also includes pipe plug, male connector, cover plate, O.D. M6750E303 flat washer, and oil pan gasket. 35⁄8" deep...... 50281...... kit...... 169.95 Transmission dipsticks – Ford Racing ’68 - ’72 F-Series C6. ’64 - ’72 C4...... M6750D303...... ea...... 33.95 Also includes transmission oil filter with gasket, and oil pan ’66 - ’72 C6...... M6750E303...... ea...... 32.95 gasket. 35⁄8" deep.... 40281...... kit...... 164.95

www.autokrafters.com 86 Flywheels – Manual Transmission Continued Aluminum TD30C4TM Made from the highest quality 6061 T6 aluminum. This material is known for its strength, heat dissipa- Transmission dipsticks tion and, of course, reduction in weight. The friction Mounts on the transmission. High-tech dipsticks feature a braided stain- surface used is an incredibly strong 1050 steel. The less steel hose. Instructions included. plates are milled to meet Fidanza’s high specifica- ’65 - ’72 C4...... TD30C4TM...... ea...... 87.95 tions. These flywheels mate with any type of clutch ’66 - ’72 C6...... TD30C6TM...... ea...... 79.95 material, including organic, kevlar, ceramic, metallic and sintered iron. The friction surface is attached with military grade aerospace fasteners. The ring gears used are also made from 1050 steel and are heat treated for durability. The gears are heated then pressed on and secured with grade-8 button screws. SFI approved.

Drilled to fit both 101⁄2" and 11" long style and 11" diaphragm clutch pres- KD20C4HT sure plate patterns. Includes external balance weights and hardware kit. 164 teeth. ’68 - ’72 ’68 - ’72 F-100 302; ’69 - ’72 F-250 302. Transmission kick-down cables ...... 186511...... ea...... 339.95 ’64 - ’72 C4...... KD20C4HT...... kit...... 79.95 ’68 - ’72 C6...... KD20C6HT...... kit...... 84.95

(B) TRANSMISSION / CLUTCH FRG164N

(A) C0DZ- 17271A Flywheel Ring Gears ’62 - ’67 ’62 221; ’62 - ’65 260; ’65 - ’67 200; ’69 250. All M/T. 157 teeth.12" diameter...... FRG157N...... ea...... 24.95 ’65 - ’72 240 M/T; ’68 - ’72 302 M/T. C0DZ- 168 teeth. .365" width. 17271B ...... FRG164N...... ea...... 24.95

Typical Speedometer Cable Assembly Speedometer Gears (A) Flywheel Bolts and Washers 7 Right tilt. Includes 6 bolts and 6 washers. ⁄16" – 20 × 1". Grade 8. 16 teeth. Burgundy...... C0DZ-17271A...... ea...... 9.95 ...... 912...... set...... 8.95 17 teeth. White...... C3DZ-17271C...... ea...... 9.95 18 Teeth. Yellow...... C0DD-17271B...... ea...... 9.95 19 teeth. Pink...... C0DZ-17271B...... ea...... 9.95 20 teeth. Black...... C1DZ-17271A...... ea...... 9.95

FW415 50236 FW300 Speedometer Driven Gear Retainer Clip (B) Flexplates – Automatic Transmission C-type clip. ’65 - ’72 F-Series 240 / 300. ’60 - ’72 ...... C1DZ-17292A...... ea...... 1.95 164 teeth...... FW415...... ea...... 49.95 ’68 - ’72 289 / 302 C4. 157 teeth. Bolt circle: 101⁄2". Balance weight: 28.2 oz. NOTE: For street use only; not SFI certified...... 50236...... ea...... 89.95 ’68 - ’72 F-Series 302. 164 teeth...... FW416...... ea...... 39.95 ’68 - ’72 F-Series 360 / 390. 184 teeth...... FW300...... ea...... 44.95 C5AZ-6375KNOS C5AZ-6375LNOS ’68 - ’72 F-Series 390, 390 with 111⁄2" clutch. Flywheels – Manual Transmission 184 teeth. 12 pitch. 15.55" O.D. With ring gears...... C5AZ-6375D...... ea...... 54.95 ’65 - ’72 ’65 - ’67 F-Series 352; ’68 - ’72 F-Series 360. ’69 - ’72 302 / 351W / 351C C6. 7 N.O.S. 184 teeth.123⁄8" bolt circle. 164 teeth. Bolt circle: 11 ⁄16"...... C5AZ-6375KNOS...... ea...... 249.95 NOTE: For street use only; not SFI certified. ’68 - ’72 F-Series 390 with 111⁄2" clutch...... 40232...... ea...... 94.95 184 teeth. N.O.S..... C5AZ-6375LNOS...... ea...... 249.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 87 Drive Shaft Yokes TRANSMISSION / CLUTCH For small-block V8. No specific applications are available. Please check measurements before ordering.

Flexplate Bolts and Washers Includes 6 bolts and 6 washers. 7⁄16" – 20 × 13⁄16"...... 6711...... set...... 13.95

2333 160281 2349

Transmission Mount Insulators (A) Length from center or u-joint hole to end of shaft: 63⁄8" ’53 - ’64 Use with transmission swap mount kit part #TD4136 shown (B) Outside-to-outside length of u-joint: 31⁄2 " below...... 2333...... ea...... 14.95 (C) O.D. of shaft: 11⁄2 " ’68 - ’72 360 / 390 A/T...... 160281...... ea...... 16.95 (D) I.D. of shaft to spline: 19⁄32" ’69 - ’72 302 A/T or M/T; 390 M/T. (E) I.D. of spline: 13⁄32"...... 2349...... ea...... 19.95 (F) 28 splines. Uses an outer lock ring...... C3AZ-4841D...... ea...... 79.95 TD4136

TD4539

TD9424 (A) Length from center or u-joint hole to end of shaft: 73⁄4" (B) Outside-to-outside length of u-joint: 31⁄2 " (C) O.D. of shaft: 11⁄2 " (D) I.D. of shaft to spline: 17⁄16" (E) I.D. of spline: 163⁄64". Transmission Swap Mount Kits (F) 25 splines. Uses an outer lock ring. NOTE: Kits require extensive modification and are not recommended for ...... C3DZ-4841A...... ea...... 89.95 the inexperienced restorer. ’53 - ’64 For installing C4 or C6 transmissions. Mounts on channel of frame or under frame. Solid steel construction. Requires transmission mount insulator part #2333 listed above...... TD4136...... kit...... 61.95 Universal Kits Use with frame widths of 26" to 36" between rails. 3" drop ...... TD4539...... kit...... 114.95 6" drop NOTE: Must reuse stock transmission mount...... TD9424...... kit...... 114.95 (A) Length from center or u-joint hole to end of shaft: 83⁄32" (B) Outside-to-outside length of u-joint: 31⁄2 " Royal Purple Max-gear® oil (C) O.D. of shaft: 11⁄2 " 9 Max-Gear® is recommended for use in truck, mo- (D) I.D. of shaft to spline: 1 ⁄32" 3 tor home / RV, and auto-motive front or rear dif- (E) I.D. of spline: 1 ⁄32". ferentials, manual transmissions and lower gear (F) 28 splines. Uses an inner c-clip. units of marine engines that specify use of an ...... C5DZ-4841A...... ea...... 79.95 API GL-5 or GL-4 fluid. It is an ultra-tough, high performance, GL-5 automotive gear oil designed to provide maximum protection to heavily loaded gears while maximizing power output throughout the drive train. It outperforms other GL-5 gear oils 01300 01303 because it combines the highest quality synthetic PRICE MATCH GUARANTEE oils with Royal Purple’s proprietary Synslide® additive technology. This We pride ourselves in offering the best quality parts at the product makes gears run smoother, quieter, cooler and longer without overhauls. All viscosities of this product are formulated with hypoid fric- lowest prices possible. If our prices are not already lower, tion modifiers necessary for use in clutch or cone type differentials. No we will match any competitor's price on like-quality parts. additional additives are necessary. Prices matched must be current and verifiable from the competitor's web site. 1 qt. 75W90...... 01300...... ea...... 18.95 Price corrections must be made before purchase is made. 85W140...... 01303...... ea...... 15.95 No refunds on previous orders.

www.autokrafters.com 88 Clutch (L) (K) (D) (C) (I)

(J) (F) (H)

(J) (G) (B) (K)

(E) Typical ’67 - ’68 Clutch Equalizer Assembly Typical ’67 - ’68 Clutch Pedal Assembly Clutch equalizer parts

(A) C8TZ-7521D TRANSMISSION / CLUTCH

11A-2454A B7C-2457A B7A-2457A Clutch Pedal Pads (A) C0AZ-7526B D3TZ-7521A C8TZ-7528B ’53 - ’56 F-100. Set of 2, 1 each brake and clutch...... 11A-2454A...... pr...... 12.95 ’57 - ’62 Reproduction...... B7C-2457A...... ea...... 7.95 ’63 - ’72 ...... B7A-2457A...... ea...... 4.95

7C- D1TZ- 01A-7517 C1AA-7543A 358979S 2473 7583A

Clutch Pedal Arm Bumpers (B) ’53 - ’56 F-100...... 7C-2473...... pr...... 2.95 ’68 - ’72 F-Series...... D1TZ-7583A...... ea...... 9.95 C1AA-7543KIT Clutch Pedal Assembly-to-Equalizer Bar Rod (F) 18" long. ’68 - ’72 ...... C8TZ-7521D...... ea...... 22.95 Clutch Pedal Arm Mount Bushing (C) Clutch Release Idler Lever Bushing (G) ’67 - ’72 ...... B7AZ-2471B...... ea...... 1.95 ’61 - ’72 Requires 2 per vehicle...... C0AZ-7526B...... ea...... 2.95

Clutch Equalizer Bar-to-Release Lever Rod (H) Adjustable replacement. Includes rod, 2 nuts and tip. Clutch Pedal Return Spring (D) ’53 - ’56 ...... TAAA-7523A...... ea...... 4.95 ’65 - ’72 F-Series V8...... D3TZ-7521A...... ea...... 12.95 Clutch Release Equalizer Bar (I) ’68 - ’72 F-Series big-block... C8TZ-7528B...... ea...... 79.95 Clutch Release Equalizer Shaft Bushings 2 piece set. Requires 2 pairs per vehicle. ’61 - ’64 F-Series...... 01A-7517...... pr...... 5.95 Ball at Clutch Release Equalizer Shaft (J) ’65 - ’72 F-Series. Requires 2 per vehicle. C5TZ-7A533A C8TZ-7A533A D2TZ-7A533C ...... C1AA-7543A...... ea...... 3.50 Clutch Pedal Rod-to-Floor Seals (E) Felt Washer (K) Rubber. Reproduction. ’65 - ’67 Goes on the motor side of the floor. ’61 - ’72 ...... 358979S...... ea...... 1.50 Pre-molded with metal insert. Made in the USA...... C5TZ-7A533A...... ea...... 24.95 Clutch Release Equalizer Bar Repair Kit (L) ’68 - ’71 To serial #M00,001 C8TZ-7A533A...... ea...... 22.95 Kit includes 2 felt washers, 2 nylon ball bushings and 2 clevis clips. ’71 - ’72 From serial #M00,001. ’65 - ’72 F-Series...... C1AA-7543KIT...... kit...... 15.95 ...... D2TZ-7A533C...... ea...... 24.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 89 TRANSMISSION / CLUTCH Clutch disc / pressure plate sets These Dual Friction® sets generate up to a 90% increase in holding capacity over stock systems. Designed for use with engines producing high horsepower and torque out- DF700000 put in 4WD vehicles. All Centerforce® clutch (P) systems provide smooth engagement and light pedal pressure without compromising high performance. (M) Diaphragm style. ’65 - ’66 F-100 / F-250 NOTE: For throwout bearing, use part #N1439. 2WD Clutch Release Lever (N) ’65 - ’72 ’65 - ’68 352; ’65 - ’72 300; ’66 - ’71 351; ’66 - ’72 240; ’68 - Assembly (O) ’72 360. 11"...... DF700000...... ea...... 399.95 ’67 - ’72 390. 12"...... DF200015...... ea...... 389.95

C3AZ-7515CNOS Clutch Disc NOTE: Must use pressure plate #CF260000 or #CFT260000. ’65 - ’72 ’65 - ’72 300; ’66 - ’72 240, ’66 - ’71 351; ’68 - ’72 360. 11"...... 280700...... ea...... 119.95 D0TZ-7515A C6AZ-7562A Pressure Plates Centerforce I Offers 30% more holding capacity than a stock OEM clutch while maintaining a stock pedal feel. NOTE: For use with clutch disc #280700 only. NOTE: For 60% greater holding capacity, order C5TZ-7513A C8AZ-7522A #CFT260000. Clutch Release Lever parts ’65 - ’72 ’65 - ’72 300; ’66 - ’71 351; ’66 - ’72 240; ’68 - ’72 360...... CF260000...... ea...... 179.95 Clutch Release Lever (Fork) (M) ’65 - ’71 ’65 - ’70 F-Series 6- or 8-cylinder to serial #G30,001; ’68 - Centerforce II ’71 F-Series to serial #L40,001. Offers 60% greater holding capacity over a standard 111⁄2" long. New old stock. factory clutch. Recommended for use with “mildly ...... C3AZ-7515CNOS...... ea...... 49.95 modified” vehicles used for street and strip. This unit ’70 - ’72 F-100...... D0TZ-7515A...... ea...... 18.95 has also proven to be very capable for 4WD and off- road use. Also good for heavy towing. Clutch Release Lever Anti-Rattle Spring (N) NOTE: For use with clutch disc #280700 only. ’65 - ’72 F-Series...... C6AZ-7562A...... ea...... 9.95 ’65 - ’72 ’65 - ’72 300. ’66 - ’71 351; ’66 - ’72 240; ’68 - ’72 360. Clutch Release Lever-To-Clutch Housing Boot (O) ...... CFT260000...... ea...... 214.95 Reproduction. ’65 - ’72 F-Series from serial #600,001...... C5TZ-7513A...... ea...... 14.95 Pressure Plate Bolts and Washers Clutch Release Lever Bracket (P) Includes 6 bolts and 6 washers. 5⁄16" – 18 × 1". Grade 8. Fits on bellhousing. ’63 - ’79 V8...... 911...... set...... 11.95 ’70 - ’72 8-cylinder with clip-type lever...... C8AZ-7522A...... ea...... 19.95 Throwout Bearing NOTE: #N1439 is only for the following clutch disc / Complete Clutch Kit pressure plate sets shown above #DF700000, This LuK Repset® clutch kit replaces #DF200015 and #280700. the OE lever type clutch. The original ...... N1439...... ea...... 49.95 clutch had 6 bolt holes while this LuK replacement has 9 to handle multiple Pilot Bearing applications. Limited warranty on work- ’65 - ’72 F-Series 240, 300; ’68 - ’72 F-Series 302, manship and materials, please read warranty guide before installation. 351W...... FC65662...... ea...... 16.95 Made in the USA. 1015⁄16" O.D., 11⁄16" spline, 10 teeth. Includes a high quality diaphragm clutch Clutch Pilot Bushing and disc assembly, release bearing, pilot bearing, and alignment tool. ’66 - ’72 ’66 - ’71 F-250 / F-350 351; ’70 - ’72 F-100 / ’65 - ’72 ’65 - ’72 300; ’70 - ’72 240; ’71 - ’72 360. F-250 302 with 11" plate...... 07-027...... kit...... 159.95 ...... N20...... ea...... 5.95

www.autokrafters.com 90

10252 10253 4-7104G Ball joints Upper Complete Bushing Sets Includes slotted / threaded sleeve, castle nut, cotter pin, grease fitting, Complete set includes track arm bushings, radius arm bushings and C and dust boot. bushings. Offsets are for C Bushings. 14 piece sets. Black only. ’72 F-100 4WD...... 10252...... ea...... 24.95 NOTE: Use 2° offset for stock to 2" lift, 4° offset for 2" - 4" lift and 7° Lower offset for more than a 4" lift. Includes castle nut, split-ring retainer and dust boot. ’66 - ’72 F-100 4WD. Set of 4. ’72 F-100 4WD...... 10253...... ea...... 14.95 2° offset...... 4-7104G...... set...... 59.95 4° offset...... 4-7105G...... set...... 59.95 7° offset...... 4-7106G...... set...... 59.95

ES416R

47107G K8146 SUSPENSION / STEERING Radius Arm Bushings ’65 - ’72 F-100 2WD; 66 - 72 F-100 4WD and F-250 2WD. Polyurethane...... 47107G...... set...... 19.95 ’66 - ’72 F-100 4WD. Requires 1 kit per vehicle. Includes 4 bushings, 4 washers and 2 pins. ES413R ...... K8146...... set...... 29.95 ES362R ’66 - ’72 F-100 4WD, bracket end. Requires 2 pair per vehicle. Tie Rod Ends Black...... HB1047K...... pr...... 19.95 2WD ’61 - ’63 F-100. LH...... ES416L...... ea...... 39.95 4-7101G RH...... ES416R...... ea...... 39.95 ’65 - ’72 F-100 to serial #M00,001. LH inner...... ES362R...... ea...... 39.95 C Bushings – urethane ’65 - ’72 F-100 2WD from serial #M00,001; ’65 - ’71 F-250 2WD Sets of 4. from serial #M00,001 with 3,000 lb. axle, drum brakes; ’72 F-250 2WD with 6,200 GVW. NOTE: Use 2° offset for stock to 2" lift, 4° offset for 2" to 4" lift and 7° LH inner...... ES413R...... ea...... 29.95 offset for more than a 4" lift. ’66 - ’72 F-100 4WD. 2° offset...... 4-7101G...... set...... 33.95 4° offset...... 4-7102G...... set...... 33.95 7° offset...... 4-7103G...... set...... 33.95 ES150L ES150R

DS768 K8095 C5TZ-3B177A Axle Pivot Bushing NOTE: Twin I Beam requires 2. ’65 - ’72 F-100 2WD...... K8095...... ea...... 29.95 ES391R ES380R Front Axle Pivot Bushing Metal and rubber. Made exactly like the original. 4WD ’61 - ’66 ’61 - ’65 F-100 4WD; ’61 - ’66 F-250 4WD with 3,000 or ’65 - ’72 F-100 Twin I Beam. 3,500 lb. axle...... C5TZ-3B177A...... ea...... 14.95 LH...... ES150L...... ea...... 39.95 RH...... ES150R...... ea...... 39.95 ’66 - ’72 F-100 4WD. LH connecting...... DS768...... ea...... 139.95 RH outer...... ES391R...... ea...... 59.95 ’67 - ’72 F-250 4WD. LH...... ES380L...... ea...... 51.95 Track Arm Bushings RH...... ES380R...... ea...... 51.95 ’66 - ’72 F-100 4WD...... 4-7108G...... set...... 11.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 91 SUSPENSION / STEERING Sway Bars Gloss black powder coat finish. Complete kits come with bushings and ES362S end links. ’53 - ’60 Examples needed...... CALL Tie Rod End Adjusting Sleeves ’61 - ’64 F-100. ’65 - ’72 F-100 2WD; ’65 - 71 F-250 2WD; 71 - 72 F-350 2WD from Rear. 7⁄ ". serial #M00,001. 8 Rubber...... AD956R...... ea...... 241.95 41⁄ ". Includes 2 bolts, 2 nuts. 2 Urethane...... AD956U...... ea...... 241.95 ...... ES362S...... ea...... 29.95 ’65 - ’72 F-Series. ’66 - ’72 ’66 - ’72 F-100 4WD; ’67 - ’71 F-350 2WD to serial #M00,001. Front. 1"...... ES2012S...... ea...... 29.95 Rubber...... AD113R...... ea...... 252.95 Urethane...... AD113U...... ea...... 252.95 Dust Largest Diameter ’65 - ’72 F-100 / F-250 2WD. Boot Taper (A) Rear. 1". Rubber...... AD340R...... ea...... 252.95 Measurement A Diameter Top Urethane...... AD340U...... ea...... 252.95 Measurement B of Socket (B) ’65 - ’72 F-350 2WD. Rear 1". Tie Rod End Rubber...... AD291R...... ea...... 274.95 Dust Boots Urethane...... AD291U...... ea...... 274.95 Replace your tie rod dust boot without having ’70 - ’72 F-100 4WD. to buy a new tie rod. Made from high quality Rear 1". 913101G polyurethane, new dust rod boots will help Rubber...... AD396R...... ea...... 241.95 resist damage from rocks, sand, water, road salt, and oils by sealing the Urethane...... AD396U...... ea...... 241.95 tie rod end to prevent loss of lubricants, the major cause of tie rod wear. Measure the tie rod end per the diagram shown to find the closest fit.

’53 - ’72 Dimension A: 31⁄64" or .472" or 12 mm. Dimension B: 113⁄64" or 1.200" or 30.5 mm. 4-2102G Black...... 913103G...... ea...... 5.95 ’53 - ’72 Dimension A: 19⁄32" or .590" or 15 mm. Dimension B: 13⁄8" or 1.375" or 35 mm. Black...... 913101G...... ea...... 5.95 Spring Bushing Sets Black bushings. Complete sets include shackle bushings.

Front ’67 - ’72 F-250 4WD with 11⁄4" main eye O.D. DS658 ...... 4-2118G...... set...... 44.95 Shackle bushings only...... 4-2130G...... set...... 15.95 RP25861 Rear ’57 - ’72 2WD. Shackle bushings only. RP25852 ...... 4-2126G...... set...... 16.95 ’66 - ’72 F-100 4WD...... 4-2102G...... set...... 54.95 Drag Links (Center Links) Shackle bushings only. ’58 - ’66 ’58 - ’64 F-100 / F-250 2WD M/S; ’58 - ’65 F-100 4WD M/S; ...... 4-2126G...... set...... 16.95 ’58 - ’60 F-250 4WD; ’61 - ’66 F-250 4WD with 3,000 lb. axle...... DS658...... ea...... 129.95 ’66 - ’70 F-100 4WD. Complete assembly...... RP25861...... ea...... 189.95 ’67 - ’72 ’67 - ’70 F-250 4WD M/S; ’71 - ’72 F-250 4WD...... RP25852...... ea...... 158.95 Front Spring Shackle Bar – Inner ’53 - ’56 F-Series...... 7RC-5468...... ea...... 4.95

AUTO KRAFTERS PRICE MATCH GUARANTEE We pride ourselves in offering the best quality parts KY97355 SSD112 at the lowest prices possible. If our prices are not al- Steering Stabilizers ready lower, we will match any competitor's price on Comes with hardware and instructions. like-quality parts. ’59 - ’72 F-250 4WD without P/S...... KY97355...... ea...... 104.95 Prices matched must be current and verifiable from the competitor's web site. ’61 - ’67 F-100...... SSD112...... ea...... 79.95 Price corrections must be made before purchase is made. ’66 - ’72 F-100 4WD except super cab. No refunds on previous orders...... 16227...... set...... 40.95

www.autokrafters.com 92 Front Shocks

KY32075 Monroe-MaticPlus® Nitrogen gas charged for improved ride and comfort. Limited 3-year / 36,000 mile manufacturer’s warranty.

’53 - ’55 F-100 1⁄2 ton and F-250 3⁄4 ton 2WD...... KY32207...... ea...... 29.95 ’61 - ’72 ’61 - ’65 F-100 1⁄2 ton 4WD; ’61 - ’72 F-250 3⁄4 ton 4WD. Lowering kits and Related ...... KY32286...... ea...... 29.95 Dream Beams Front End Lowering Kit ’65 - ’72 ’65 - ’69 F-100 1⁄2 ton 2WD and F-250 3⁄4 ton 2WD except Lowers the front end of your truck 3". For rear lowering kit, see part heavy duty; #HS11304 below. For shocks for this kit, see part # S1415 or #L1409 ’70 - ’72 F-100 1⁄2 ton 2WD and F-250 3⁄4 ton 2WD except below. heavy duty, crew cab and Camper Special...... KY32075...... ea...... 29.95 ’65 - ’72 F-100 2WD...... DB3004B3...... kit...... 749.95

KY34909 Loop End Shock Stem End Shock Gas-Magnum® Shocks Front Shocks for Lowering Kit Designed for hard-working full-size pickups. Nitrogen gas charged. Used with Front End Lowering Kit #DB3004B3. Manufacturer’s limited lifetime warranty. Requires 2 per vehicle.

SUSPENSION / STEERING With loop at top of shock. ’61 - ’72 ’61 - ’65 F-100 1⁄2 ton 4WD and F-250 3⁄4 ton 4WD; ...... L1409...... ea...... 54.95 ’66 - ’72 F-250 3⁄4 ton 4WD. With stem at top of shock...... KY34909...... ea...... 42.95 ...... S1415...... ea...... 59.95 ’65 - ’72 ’65 - ’72 F-Series 1⁄2 ton and 3⁄4 ton; ’67 - ’72 F-350 except super cab 1 ton...... KY34900...... ea...... 45.95

Rear shocks

KY32126 Monroe-MaticPlus® Nitrogen gas charged for improved ride and comfort. Manufacturer’s limited 3-year / 36,000 mile warranty.

Rear Hangers and Shackles Lowering Kit ’53 - ’55 ’53 - ’54 F-100 1⁄2 ton 2WD; ’53 - ’55 F-250 3⁄4 ton 2WD. Kit lowers your truck’s rear 4"...... KY32207...... ea...... 29.95 NOTE: For shocks see parts #S1910 and #L1900 below. ’56 - ’60 F-100 1⁄2 ton 2WD; F-250 3⁄4 ton 2WD...... KY32126...... ea...... 24.95 ’65 - ’72 F-100 2WD...... HS11304...... kit...... 209.95 ’65 - ’69 F-100 1⁄2 ton 2WD; F-250 3⁄4 ton 2WD except heavy duty...... KY32164...... ea...... 31.95 ’70 - ’72 F-100 1⁄2 ton 2WD except heavy duty; F-250 3⁄4 ton 2WD except heavy duty, crew cab and Camper Special...... KY32080...... ea...... 34.95

KY34901 L1900 Rear Shocks for Hangers and Shackles Lowering Kit Monroe® Gas-Magnum® Shocks ® Used with Rear Hangers and Shackles Kit #HS11304 above. Designed for hard-working full-size pickups. Nitrogen gas charged. ’65 - ’72 F-100 2WD. Manufacturer’s limited lifetime warranty. Requires 2 per vehicle. With loop at top of shock. ’56 - ’60 F-100 1⁄2 ton and F-250 3⁄4 ton 2WD...... L1900...... ea...... 69.95 ...... KY34954...... ea...... 44.95 With stem at top of shock. ’66 - ’72 ’66 - ’69 F-100 1⁄2 ton 4WD; ’66 - ’72 F-250 3⁄4 ton 4WD...... S1910...... ea...... 49.95 ...... KY34821...... ea...... 39.95 ’70 - ’72 F-100 1⁄2 ton. 4WD...... KY34901...... ea...... 47.95 Monroe® Max Air® Air Shocks These rear shock absorbers have large air chambers that inflate up to 150 PSI. Contains all-weather Front Spring Bottom Seats fluid that ensures smooth reaction ’71 - ’72 F-100 4WD...... D1TZ-5A307A...... ea...... 31.95 for the 1⁄2" piston rod. Features sintered iron pistons for durability. The air fitting resists air leakage. Comes with mounting hardware and air Here’s what our customers are saying about us... line installation kit. “Super-fast shipping! Unbelievable!” ’56 - ’60 F-100 / F-250 2WD. – Mark S...... MA805...... ea...... 89.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 93 Remanufactured Power Steering SUSPENSION / STEERING Components ** Call our Rebuild Department to place an order or for any ques- 2710 tions concerning rebuilds. ** These premium remanufactured units carry a manufacturer’s limited lifetime warranty against defects in material or workmanship for as long as you own your vehicle. We will repair or replace ANY remanufactured steering component found to be defective due to failure of material or workmanship in our judgement. This warranty does NOT cover opera- 2773 tor negligence, misuse, accidents, improper installation, changes in adjustments or disassembly. If you do not have a unit to be rebuilt, call our Rebuild Parts Department for availability of rebuildable core. Please allow 3 to 4 weeks plus ship- Power Steering Pump Seal Repair Kits ping to rebuild the unit. Core fees are in addition to the price of the unit ’60 - ’66 With Eaton pump.... 2710...... kit...... 14.95 and are refundable in 3 to 4 weeks after receiving a rebuildable core. ’60 - ’72 With Ford pump...... 2773...... kit...... 16.95 ** ALL CORE MUST BE RETURNED COMPLETE WITHIN 60 DAYS TO RECEIVE A FULL REFUND ** NOTE: There will be an additional cost for replacement parts such as ball stud, end cap, worm gear or sector shaft.

Remanufactured Gear Boxes ** Call our Rebuild Department to place an order or for any questions concerning rebuilds. ** Front Side Rebuild consists of new bushings, bearings and Power Steering Pump Pulley seals. The worm gear and sector shaft are polished One groove. 51⁄4" O.D. 3⁄8" sheave width. and inspected to ensure quality and the gear box is ’68 - ’70 F-100 / F-250 2WD 8-cylinder with A/C. then set back to original specifications. If the worm ...... C7AZ-3A733A...... ea...... 59.95 gear or sector shaft need replacing, you will be noti- fied. If available, these parts can be replaced for an Power Steering Hoses additional charge. Please have your tag number ready when ordering. Call for core prices and availability. ’53 - ’64 M/S...... Prices start at...... 350.00 ’65 - ’66 M/S...... Prices start at...... 225.95 ’64 - ’72 P/S...... Prices start at...... 269.95 437 4042

Steering Gear Box Gasket Kit Includes steering shaft felt seal #21C-3738A (see next page). Pressure Hoses ’65 - ’66 6-cylinder 2WD...... 437...... ea...... 29.95 ’53 - ’60 ...... 7C-3581...... kit...... 4.00 ’67 - ’72 2WD or 4WD 8-cylinder. 193⁄4" long with 3⁄8" female S.A.E. and 5/16: male inverted flare...... 4042...... ea...... 19.95 ’69 - ’72 6-cylinder 2WD...... 437...... ea...... 29.95

771 491 P125 P247 Remanufactured Power steering Pumps ** Call our Rebuild Department to place an order Return Hoses or for any questions concerning rebuilds. ** ’65 - ’69 ’65 - ’66 6- or 8-cylinder 2WD; ’67 - ’69 2WD with straight Typical Tag We can help you identify your pump with your tag tube return...... 771...... ea...... 17.95 Number Location number if you are not sure which pump you have. ’67 - ’69 6-cylinder with Ford gear (tag #SPA-L); 302. ’58 - ’65 Eaton pump. Front mount. Bulk; sold by the inch (12" minimum)...... P125...... ea...... 119.95 ...... 903- ...... 12"...... 9.95 Core fee...... ea...... 150.00 ’69 - ’72 F-Series 4WD...... 491...... ea...... 14.95 ’65 - ’66 Ford pump...... P246...... ea...... 109.95 ’70 - ’72 6-cylinder and 360 / 390. Core fee...... ea...... 100.00 ...... 807...... ea...... 16.95 ’67 ...... P217...... ea...... 109.95 302. Core fee...... ea...... 100.00 Bulk hose; sold by the inch (12" minimum). ’68 - ’72 ...... P247...... ea...... 109.95 ...... 903- ...... 12"...... 9.95 Core fee...... ea...... 100.00 All. Cooler to pump...... 903-14...... ea...... 9.95

www.autokrafters.com 94 Premium Manual Hubs These premium hubs will replace manual locking hubs and automatic locking hubs unless vehicle has full-

C3DZ-3517A B1AZ-3518A D0TZ-3510A time 4WD. When replacing automatic 3 hole cap screw hubs, you need to Lower Steering Column Bearing convert the spindle nuts (For kit see ® 1" I.D. 17⁄16" O.D. 15⁄32" thick. Genuine Ford. part #32720 below). Warn all metal premium hubs exhibit a long list of technical advantages no other hub can match. The external hub body is ’64 - ’72 ’64 - ’72 F-100 / F-250 2WD; ’64 - ’66 F-100 / F-250 4WD; ’67 - constructed of ZA27 super alloy. These hubs feature a larger body wall ’72 F-350...... C3DZ-3517A...... ea...... 4.95 and thickness to optimize clutch ring strength. Rapid positive engage- ment prevents ratcheting, dual dial seals lock out contaminants, and a Lower Steering Column Bearing Sleeve corrosion resistant, chrome-plated finish enhances performance. Most ’64 - ’72 ’64 - ’67 F-100 / F-250; ’68 - ’72 F-100 / F-250 2WD; ’68 - Warn® hubs install in under one hour per pair. Made in the USA. ’72 F-350...... B1AZ-3518A...... ea...... 8.95 ’59 - ’72 F-100 except full-time 4WD...... 20990...... pr...... 139.95 Lower Steering Column Bearing Seal Made exactly like original. ’67 - ’72 ...... D0TZ-3510A...... ea...... 6.95

Spindle Nut Kit ’59 - ’72 F-100 except full-time 4WD. SUSPENSION / STEERING Front Back ...... 32720...... kit...... 69.95

C9UZ-3A525 400518

Steering Couplings ’65 - ’66 F-100 / F-250 2WD to serial #900,001. Hubs / Locking / Free Wheel ® Larger pin has .41" O.D. Premium classic design and durability. Full metal cap and body. You ...... C5TZ-3A525A...... ea...... 29.95 can get more miles from your front tires since they will rotate freely. ’65 - ’68 ’65 - ’66 F-100 / F-250 2WD from serial #900,001. More power and performance since the front drivetrain is not rotating – ’67 - ’68 F-Series 2WD to serial #D68,001. thus giving the engine a reduced load. A more comfortable ride is Larger pin has .56" O.D. assured – the steering is lighter, and there is less tendency to shimmy...... C6TZ-3A525A...... ea...... 29.95 Replaces factory manual hubs. ’69 - ’72 F-100 / F-250 2WD C9UZ-3A525...... ea...... 29.95 ’60 - ’72 F-100; ’60 - ’72 F-250 with 3,000 lb. axle. F-100 / F-250 2WD; F-350...... 400518...... pr...... 79.95 ...... C9TZ-3A525B...... ea...... 29.95 ’63 - ’72 F-250 with 3,500 lb. axle. (A) ...... 400517...... pr...... 169.95

(B)

Typical Lower Steering Column and Steering Gear Box 7RC-3020 B7C-3020 11A-3020A 8M-3591

Steering Shaft Seals B7C- C5TZ- ’53 - ’60 Steering shaft felt seal. 5783A 4730B Included in steering gear box gasket kit #7C-3581 (see previous page). Axle Bumpers (A)...... 21C-3738A...... ea...... 95 Requires 2. ’53 - ’60 Sector shaft seal. (B)...... 8M-3591...... ea...... 4.95 Front ’53 - ’56 F-100...... 7RC-3020...... ea...... 6.95 Steering Sector Gears ’57 - ’60 F-100...... B7C-3020...... ea...... 5.95 ’61 - ’64 ...... C3TZ-3575G...... ea...... 139.95 Rear ’65 - ’66 ...... C5TZ-3575D...... ea...... 239.95 ’53 - ’54 F-100. Rear...... 11A-3020A...... ea...... 5.95 ’67 - ’70 F-100 / F-250...... C7TZ-3575C...... ea...... 89.95 ’57 - ’60 F-100. Genuine Ford...... B7C-5783A...... ea...... 31.95 ’65 - ’72 F-100 / F-250 4WD; ’67 - ’72 F-Series 2WD. B6C-3524A Genuine Ford...... C5TZ-4730B...... ea...... 51.95 Steering Worm and Shaft Assemblies Reproduction...... C5TZ-4730BR...... ea...... 19.95 ’53 - ’55 F-100 / F-250...... TAAA-3524A...... ea...... 149.95 ’56 F-Series...... B6C-3524A...... ea...... 149.95 Rear Axle Housing Gasket ’57 - ’60 F-Series...... B7C-3524A...... ea...... 149.95 ’57 - ’66 F-100. 9" ring gear. ’61 - ’64 F-Series...... C3TZ-3524G...... ea...... 129.95 ...... B7A-4035...... ea...... 4.95 ’69 - ’70 F-100 / F-250...... C7TZ-3524D...... ea...... 99.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 95 BRAKE Remanufactured Power Brake Boosters ** Please call our Rebuild Department to place an order or for any questions concerning Rebuilds. ** These premium remanufactured units carry a 1 year / 15,000 mile man- ufacturer’s replacement warranty to original purchaser. You must retain your invoice for date verification. VL3350KF VL3359KN Please allow 3 to 4 weeks plus shipping for the rebuilding of your booster and master cylinder. Brake Proportioning Valves Necessary when converting from manual brakes to power brakes. Boosters can also be rebuilt without master cylinder. Call our Rebuild Department for information and pricing. Manufacturer’s limited 1-year warranty. If you do not have a booster to be rebuilt, please call for availability of a ’53 - ’72 Front disc / rear drum. rebuilt unit or call our Rebuild Department for availability of a rebuildable ...... VL3350KF...... ea...... 139.95 core. Core fees are in addition to the price of the unit and are refundable Front disc / rear disc. in 3 to 4 weeks after receiving a rebuildable core...... VL3359KN...... ea...... 139.95 ** ALL CORES MUST BE RETURNED WITHIN 60 DAYS TO RECEIVE A FULL REFUND. ** Brake Proportioning Valve Rebuilding PRC: Pedal Rod Code. ** Please call our Rebuild Department to place an order or for any questions con- cerning rebuilds. ** Send complete valves with full vehicle information. If valves are dis- Diameter: 7" 2503446 / 2505396 assembled, please completely reassemble before sending in order to prevent lost parts during shipment. All valves are 100% guaranteed by the manufacturer for as long as you own your vehicle.

NOTE: Customer must supply a core or customer can also purchase a ’65 - ’66 F-100. Drum brakes with master cylinder. core, when available, with no core charge. Diameter 7". (PRC: FT1)...... 2503446...... ea...... 169.95 ...... PVRB...... ea...... 229.95 Core fee...... 2503446CORE...... ea...... 135.00 ’67 F-100 all with master cylinder. Bendix. Diameter 7". (PRC: FT4). BM1546K ...... 2505396...... ea...... 189.95 Core fee...... 2505396CORE...... ea...... 100.00

Power Brake Conversion Kits Manufacturer’s limited 1-year warranty. Diameter: 9" 2506795 ’53 - ’56 Kit includes 7" mini booster that mounts to original location under the floor, dual master cylinder and hardware. Use the original brake pedal...... BM1546K...... kit...... 395.00 ’68 - ’72 F-100 drum brakes; F-250 with disc and drum brakes. ’57 - ’72 For drum / drum conversion. Diameter 9". (PRC: FT9). Kit includes booster, dual master cylinder and hardware...... 2506795...... ea...... 199.95 ...... BM1550K...... kit...... 349.95 Core fee...... 2506795CORE...... ea...... 100.00 ’57 - ’72 For disc / drum conversion. Bolts to the original location on the firewall. Kit includes new booster, dual master cylinder, mounting bracket, disc / drum proportioning valve kit, and necessary hardware...... BM1547K...... kit...... 429.95 2502499 600706

Brake Booster Check Valve and Grommet Master Cylinder ’61 - ’66 F-100 2WD / 4WD; ’66 F-250 2WD. Valve ...... C5TZ-2140A...... ea...... 54.95 2-prong. ’53 - ’72 ...... 2502499...... ea...... 9.95 **If your master cylinder is not available new, check with our Rebuild Dept. to see Grommet whether your original can be rebuilt.** ’53 - ’72 ...... 600706...... ea...... 2.50

RP32AA C8AZ- 2B264A

Top Detail Brake Booster Boot ’60 - ’71 F-Series...... RP32AA...... ea...... 14.95 1A-2162A C5ZZ-2162 C5ZZ-2162BC Master Cylinder Caps Brake Pressure Differential Valve ’53 - ’60 F-100...... 1A-2162A...... ea...... 12.95 Warning Lamp Sensor Switch ’61 - ’66 Gold plated zinc...... C5ZZ-2162...... ea...... 19.95 Genuine Ford. Chrome...... C5ZZ-2162BC...... ea...... 19.95 ’68- ’72 F-Series...... C8AZ-2B264A...... ea...... 29.95

www.autokrafters.com 96 Brake Lines Continued Original Stainless ’71 F-100 2WD. 10 piece set. With manual drum brakes. 8M-2167 42069 42068 Short bed...... FRB7104...... 185.95...... 221.95 BRAKE Master Cylinder Cap Gaskets Long bed...... FRB7102...... 185.95...... 221.95 ’53 - ’60 F-100. With power drum brakes. New old stock...... 8M-2167...... ea...... 3.00 Short bed...... FRB7103...... 185.95...... 221.95 ’68 F-100 / F-250 with dual-bowl master cylinder. Long bed...... FRB7101...... 185.95...... 221.95 ...... 42069...... ea...... 6.95 ’72 F-100 2WD. ’69 - ’72 F-100 / F-250 with dual-bowl master cylinder. 8 piece set. With Bendix master cylinder. With manual disc brakes...... 42069...... ea...... 6.95 Short bed...... FRB7208...... 185.95...... 221.95 With Ford master cylinder Long bed...... FRB7206...... 185.95...... 221.95 ...... 42068...... ea...... 6.95 With power disc brakes. Short bed...... FRB7207...... 185.95...... 221.95 Brake Fluid – DOT 5 Super Heavy Duty Silicone Long bed...... FRB7205...... 185.95...... 221.95 Doesn’t eat paint like most conventional brake fluids. Does ’72 F-100 2WD. not absorb water and may be useful where water absorption 10 piece set. is a problem. Compatible with most rubber formulations, and Wth manual drum brakes. has a higher boiling point (500º F / 260º C) than DOT 3. Short bed...... FRB7204...... 185.95...... 221.95 NOTE: Not all manufacturers recommend silicone brake Long bed...... FRB7202...... 185.95...... 221.95 fluid. Not for anti-lock systems. Check vehicle instructions With power drum brakes. and use only the recommended fluid. Short bed...... FRB7203...... 185.95...... 221.95 Does NOT mix with DOT 3 brake fluid. Brake lines should be Long bed...... FRB7201...... 185.95...... 221.95 replaced or flushed completely to avoid contamination of silicone fluid. Contamination may result in brake failure or costly repairs. DOT 5 is slightly compressible, giving a very slightly soft pedal. Do not use silicone fluid in convertible top systems. BH16766 BH23807 BH36606 32 oz...... DS32...... ea...... 19.95

Brake Lines Brake Hoses Please put “SS” after the part number if ordering stainless steel. Original Stainless Front ’53 - ’56 F-100 2WD with drum brakes. ’53 - ’56 F-100. LH or RH...... BH16766...... ea...... 29.95 Short bed...... FRB5501...... 150.00...... 179.95 ’57 - ’60 2WD. LH or RH...... BH23807...... ea...... 26.95 ’57 - ’60 F-100 2WD with manual drum brakes. ’65 - ’71 2WD. LH or RH...... BH36531...... ea...... 28.50 Short bed...... FRB5701...... 179.95...... 199.95 Long bed. 6 pieces.. FRB5702...... 179.95...... 199.95 Rear ’61 - ’64 F-100 2WD with manual drum brakes. ’53 - ’56 ...... BH11146...... ea...... 22.95 6 piece set. ’57 - ’60 2WD...... BH11146...... ea...... 22.95 Short bed...... FRB6102...... 175.00...... 199.95 ’66 - ’72 2WD...... BH36606...... ea...... 29.95 Long bed...... FRB6101...... 173.95...... 199.95 ’65 - ’66 F-100 2WD. 6 piece set. With manual drum brakes.

Short bed...... FRB6502...... 173.95...... 199.95 WC17507 WC17508 Long bed...... FRB6501...... 173.95...... 199.95 WC18291 ’67 - ’70 F-100 2WD. Wheel Cylinders With manual drum brakes. Short bed...... FRB6704...... 185.95...... 221.95 Drum – Front Long bed...... FRB6702...... 185.95...... 221.95 ’65 4WD. ’67 - ’70 F-100 2WD. LH...... WC37083...... ea...... 29.95 With power drum brakes. RH...... WC37084...... ea...... 29.95 Short bed...... FRB6703...... 185.95...... 221.95 ’65 - ’67 2WD. Long bed...... FRB6701...... 185.95...... 221.95 LH...... WC37083...... ea...... 29.95 ’67 - ’70 F-250 2WD. RH...... WC37084...... ea...... 29.95 With manual drum brakes ’66 - ’71 4WD. Short bed...... FRB6708...... 185.95...... 221.95 LH...... WC36058...... ea...... 26.95 Long bed...... FRB6706...... 185.95...... 221.95 RH...... WC36057...... ea...... 26.95 With power drum brakes. ’68 - ’71 2WD. Short bed...... FRB6707...... 185.95...... 221.95 RH...... WC18291...... ea...... 29.95 Long bed...... FRB6705...... 185.95...... 221.95 ’72 2WD. ’71 F-100 2WD. 8 piece set. LH...... WC36058...... ea...... 26.95 With manual disc brakes. RH...... WC36057...... ea...... 26.95 Short bed...... FRB7108...... 185.95...... 221.95 Drum – Rear Long bed...... FRB7106...... 185.95...... 221.95 ’54 - ’72 F-100 from late ’54. 7⁄ " bore. With power disc brakes. 8 LH...... WC17507...... ea...... 14.95 Short bed...... FRB7107...... 185.95...... 221.95 RH...... WC17508...... ea...... 14.95 Long bed...... FRB7105...... 185.95...... 221.95

ORDER TOLL FREE 1 - 800 - 228 - 7346 97 BRAKE

639540 Brake Speed Bleeders One-person brake bleeder. ’67 - ’72 ’67 - ’72 F-250 rear brake drums; 140112 BD2611 ’68 - ’72 F-100 2WD front brake drums. ’68 - ’71 F-100 4WD front brake drums; Brake Drums ’68 - ’72 F-350 rear brake drums; Front ’69 - ’72 F-100 front brake drums; ’60 - ’63 ’60 F-100 4WD; ’60 - ’63 F-100 2WD. ’72 F-100 4WD rear brake drums...... 140112...... ea...... 89.95 3⁄8" – 24 thread × 1" long. ’64 - ’72 ’64 - ’67 F-Series 2WD; ’68 - ’72 F-Series 4WD...... 639590...... ea...... 19.95 ...... C9TZ-1102B...... ea...... 49.95 ’68 - ’72 ’68 - ’71 F-100 4WD rear brake drum; ’68 - ’72 F-100 2WD rear brake drums; Rear ’69 - ’72 F-100 rear brake drums. ’53 - ’67 ’53 - ’67 F-100 2WD; ’59 - ’67 F-100 4WD. 1⁄4" – 28 thread × 1" long...... BD2611...... ea...... 39.95 ...... 639540...... ea...... 17.95 ’67 - ’72 F-250 2WD with 12" × 21⁄2" heavy duty brakes; F-250 4WD...... C9TZ-1126B...... ea...... 99.95 ’68 - ’72 F-100 2WD and 4WD with 11" brakes. (A) ...... BD2645...... ea...... 49.95

(B) QA151 (C)

Typical Wheel Hub Assembly Brake Shoes Remanufactured. Limited lifetime guarantee. ’53 - ’67 F-100. Front. 11" × 2"...... QA228...... set...... 29.95 A-2 A-35 A-37 3 Rear, except heavy duty. 10" × 1 ⁄4"...... QA151...... set...... 29.95 Rear. 11" x 13⁄4"...... QA55...... set...... 39.95 Wheel Bearing Assemblies Outer (A) ’57 - ’67 ’57 - ’64 F-250 2WD; ’57 - ’67 F-100 2WD...... A-2...... ea...... 9.95 H2544 ’59 - ’72 ’59 - ’68 F-100 4WD with Spicer 44, 44-7F; ’59 - ’69 F-250 4WD with Spicer 44; Brake Self-adjusting Repair Kits ’59 - ’72 F-250 4WD with Spicer 44-6CFHD; ’69 - ’72 F-100 4WD with Spicer 44-7F; Contains a lever, cable, cable guide, self adjusting screw assembly and ’69 - ’72 F-250 4WD with Spicer 44-6E, 44-6F. an access hole plug...... A-35...... ea...... 15.95 ’68 - ’72 F-100 with 2WD front drum brakes; F-100 all rear drum ’65 - ’72 F-250 2WD with drum brakes; ’68 - ’72 F-100 2WD. brakes...... A-3...... ea...... 9.95 Left...... H2544...... ea...... 14.95 Inner (B) Right...... H2545...... ea...... 14.95 ’57 - ’72 ’57 - ’64 F-250 2WD; ’57 - ’72 F-100 2WD...... A-5...... ea...... 10.95 ’59 - ’72 F-100 4WD...... A-37...... ea...... 21.95 ’65 - ’72 F-250 2WD with 2.00" light duty drum brakes...... WB3...... ea...... 23.95 ’68 - ’72 F-250 2WD with 2.50" heavy duty drum brakes; H7137 F-250 2WD with disc brakes...... A-35...... ea...... 15.95

Brake Hardware Kits 4250 ’64 - ’67 ’64 - ’67 F-100 2WD 11 × 13⁄4" rear; ’67 F-100 4WD 11 × 13⁄4" rear. Requires 1 kit per wheel...... H7144...... kit...... 12.95 ’68 - ’72 ’67 F-100 4WD with 11" × 13⁄4"; ’68 - ’72 F-100 with 11" × Wheel Bearing Inner Seals (C) 21⁄4". Rear drum brakes only. ’65 - ’72 F-100 2WD...... 4148...... ea...... 6.95 Includes all springs, pins, clips and hole covers. ’65 - ’72 F-250 drum 2.50" HD...... H7071...... kit...... 11.95 ...... 6954S...... ea...... 12.95 ’68 - ’72 F-100 11 × 2" 4WD. Front only. Requires 1 kit per wheel. ’69 - ’72 ’69 F-100 4WD from serial #F70,001; ’70 - ’72 F-100 4WD...... H7137...... kit...... 13.95 ...... 4250...... ea...... 6.95

www.autokrafters.com 98 Parking Brake Cables Front ’53 - ’56 110" wheel base. Brake Pedal Return Spring (B) 833⁄4" long...... TAAA-2853A...... ea...... 49.95 ’53 - ’56 F-100...... TAAA-2472A...... ea...... 2.95 ’56 118" wheel base. 913⁄4" long...... B6C-2853A...... ea...... 44.95 BRAKE ’57 - ’60 110" wheel base. 7C-2473 MA-7583A 801⁄2" long...... B9TT-2853K...... ea...... 39.95 ’57 - ’60 118" wheel base. Brake Pedal Arm Bumpers 881⁄ " long...... B9TT-2853L...... ea...... 52.95 2 ’53 - ’56 F-100...... 7C-2473...... pr...... 2.95 ’61 - ’64 2WD. ’57 - ’66 F-100...... MA-7583A...... ea...... 2.25 803⁄4" long...... C1TT-2853AA...... ea...... 39.95 Brake Pedal Arm Mount Bushing (C) Requires 4. C5TZ-2A635C ’67 - ’72...... B7AZ-2471B...... ea...... 1.95 Rear ’53 - ’60 1351⁄2" long...... C0TZ-2A635A...... ea...... 49.95 ’61 - ’62 2WD. Requires 2. 70" long...... C1TT-2A635B...... ea...... 49.95 ’63 - ’64 2WD. Requires 2. 677⁄16" long...... C3TZ-2A635D...... ea...... 49.95 ’65 - ’66 LH. 55" long...... C5TZ-2A635C...... ea...... 29.95 RH. 61" long...... C5TZ-2A635D...... ea...... 39.95

DB1545P Disc Brake Kits Kits include the following: C7TZ-2K650 C8SZ-2454B C8SZ-2A798A • inner bearing adapters (as required) • new rotors Parking Brake Cable-to-Floor Seal • calipers, mounting brackets and bolts • bearings ’67 - ’72 F-Series...... C7TZ-2K650...... ea...... 2.00 • seals • brake hoses and hose bolts • booster kit (for power kits) • master cylinder Parking Brake Pedal Pad and Trim • proportioning valves • all necessary hardware ’65 - ’70 kits include king pins. Complete and ready to bolt on to your truck. Pad ’67 - ’72 ...... C8SZ-2454B...... ea...... 3.95 Manufacturer’s limited 1-year warranty. 1 Trim 5 ⁄2" bolt circle. ’67 - ’72 ...... C8SZ-2A798A...... ea...... 9.95 With Manual Brakes ’53 - ’56 F-100 1⁄2 ton. Bolts onto stock spindles without modification...... DB1547M...... kit...... 595.00 ’57 - ’64 F-Series 1⁄2 ton. NOTE: Special order available for 41⁄2", 43⁄4" bolt circle...... DB1544M...... kit...... 795.00 ’65 - ’72 F-100 1⁄2 ton...... DB1545M...... kit...... 895.00 (C) With Power Brakes (C) ’53 - ’56 F-100 1⁄2 ton. Bolts onto stock spindles without modification...... DB1547P...... kit...... 695.00 ’57 - ’64 F-Series 1⁄2 ton. Typical ’67 - ’68 NOTE: Special order available for 41⁄2", 43⁄4" bolt circle. (A) Brake Pedal Assembly ...... DB1544P...... kit...... 895.00 ’65 - ’72 F-Series 1⁄2" ton...... DB1545P...... kit...... 995.00

Can’t find the parts

11A-2454A B7C-2457A B7A-2457A you’re looking for? Brake Pedal Pads (A) TRY SEARCHING OUR ’53 - ’56 F-100. WEB SITE! One brake and one clutch pedal pad...... 11A-2454A...... pr...... 12.95 New parts are added every week! ’57 - ’62 ...... B7C-2457A...... ea...... 7.95 ’63 - ’72 ...... B7A-2457A...... ea...... 4.95 www.autokrafters.com

ORDER TOLL FREE 1 - 800 - 228 - 7346