Model SR7500/SR8500 User Guide

AV Surround Receiver ENGLISH DEUTSCH ITALIANO SVENSKA WARRANTY GARANTIE GARANZIA GARANTI For warranty information, contact your local Marantz Bei Garantiefragen wenden Sie sich bitte an Ihren L’apparecchio è coperto da una garanzia di buon För information om garantin, kontakta Marantz distributor. Marantz-Händler. funzionamento della durata di un anno, o del lokalagent. RETAIN YOUR PURCHASE RECEIPT HEBEN SIE IHRE QUITTING GUT AUF periodo previsto dalla legge, a partire dalla data di SPAR KVITTOT Your purchase receipt is your permanent record of a Die Quittung dient Ihnen als bleibende Unterlage acquisto comprovata da un documento attestante Kvittot är ett inköpsbevis på en värdefull vara. Det valuable purchase. It should be kept in a safe place to für Ihren wertvollen Einkauf Das Aufbewahren der il nominativo del Rivenditore e la data di vendita. skall förvaras säkert och hänvisas till vid be referred to as necessary for insurance purposes Quittung ist wichtig, da die darin enthaltenen La garanzia sarà prestata con la sostituzione o la försäkringsfall eller vidkorrespondens mod or when corresponding with Marantz. Angaben für Versicherungswecke oder bei riparazione gratuita delle parti difettose. Marantz. Non sono coperti da garanzia difetti derivanti da IMPORTANT Korrespondenz mit Marantz angeführt werden VIKTIGT müssen. uso improprio, errata installazione, manutenzione When seeking warranty service, it is the responsibility effettuata da personale non autorizzato o, Fö att garantin skall gälla är det kundens sak att of the consumer to establish proof and date of WICHTIG! comunque, da circostanze che non possano framställa bevis och datum om köpet. Kvitto eller purchase. Your purchase receipt or invoice is Bei Garantiefragen mu§ der Kunde eine riferirsi a difetti di funzionamento dell’apparecchio. faktura är tillräokligt bevis fö detta. adequate for such proof. Kaufunterlage mit Kaufdatum vorlegen. Ihren Sono inoltre esclusi dalla garanzia gli interventi FOR U.K. ONLY Quittung oder Rechnung ist als Unterlage inerenti l’installazione e l’allacciamento agli This undertaking is in addition to a consumer's ausreichend. impianti di alimentazione. DANSK Gli apparecchi verranno riparati presso i nostri statutory rights and does not affect those rights in GARANTI Centri di Assistenza Autorizzati. Le spese ed i any way. Henvend dem til Deres MARANTZ-forhandler NEDERLANDS rischi di trasporto sono a carico del cliente. angående inrformation om garantien. La casa costruttrice declina ogni responsabilità per GARANTIE FRANÇAIS danni diretti o indiretti provocati dalla inosservanza GEM DERES KVITTERING Voor inlichtingen omtrent garantie dient u zich tot delle prescrizioni di installazione, uso e manutenzione Deres købskvittering er Deres varige bevis på et GARANTIE uw plaatselijke Marantz. dettagliate nel presente manuale o per guasti dovuti dyrt k¿b. Den b¿r gemmes godt og anvendes som Pour des informations sur la garantie, contacter le UW KWITANTIE, KASSABON E.D. BEWAREN ad uso continuato a fini professionali. bevis, hvis De vil tegne en forsikring, eller hvis De distributeur local Marantz. Uw kwitantie, kassabon e.d. vormen uw bewijs van kommunikerer med Marantz. CONSERVER L'ATTESTATION D'ACHAT aankoop van een waardevol artikel en dienen op VIGTIGT L'attestation d'achat est la preuve permanente een veilige plaats bewaard te worden voor evt, PORTUGUÊS Det påhviler forbrugeren at skaffe bevis for købet og d'un achat de valeur. La conserver en lieu sur pour verwijzing bijv, in verbend met verzekering of bij k¿bsdatoen, hvis han eller hun ¿nsker garantiservice. GARANTIA s'y reporter aux fins d'obtention d'une couverture correspondentie met Marantz. Deres k¿bskvittering eller faktura er et fuldgyldigt Para informações sobre a garantia, contactar o d'assurance ou dans le cadre de correspondances BELANGRIJK bevis herpå. distribuidor Marantz local. avec Marantz. Bij een evt, beroep op de garantie is het de GUARDAR O RECIBO DE COMPRA IMPORTANT verantwoordelijkheid van de consument een O recibo é o registo permanente da compra que fez. Pour l'obtention d'un service couvert par la gedateerd bewijs van aankoop te tonen. Uw Deve ser guardado num local seguro, para ser garantie, il incombe au client d'établir la preuve de kassabon of factuurzijn voldoende bewijs. apresentado em questões relacionadas com o l'achat et d'en corroborer la date. Le reçu ou la seguro ou para quando tiver de contactar a Marantz. facture constituent des preuves suffisantes. ESPAÑOL IMPORTANTE Quando procurar assisténcia técnica ao abrigo da GARANTIA garantia, é da responsabilidade do consumidor Para obtener información acerca de la garantia estabelecer a prova e data de compra. O recibe é póngase en contacto con su distribuidor Marantz. prova adequada. GUARDE SU RECIBO DE COMPRA Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz. IMPORTANTE Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la prueba apropiada. CE MARKING English Deutsch - Do not expose the equipment to rain or moisture. - Das Gerät nicht Regen oder Feuchtigkeit English WARNINGS WARNHINWEISE - Do not remove the cover from the equipment. aussetzen. The SR7500/SR8500 is in conformity with the EMC directive and low-voltage directive. - Do not insert anything into the equipment through - Die Abdeckung nicht vom Gerät abnehmen. Français the ventilation holes. - Keine Gegenstände durch die Belüftungs- Le SR7500/SR8500 est conforme à la directive EMC et à la directive sur les basses schlitze stecken. tensions. - Do not handle the mains lead with wet hands. - Das Netzkabel nicht mit feuchten oder nassen Deutsch - Do not cover the ventilation with any items such as tablecloths, newspapers, curtains, etc. Händen anfassen. Das Modell SR7500/SR8500 entspricht den EMC-Richtlinien und den Richtlinien für - Decken Sie die Lüftungsöffnungen nicht mit Niederspannungsgeräte. - No naked flame sources, such as lighted candles, should be placed on the equipment. einem Tischtuch, einer Zeitung, einem Vorhang Nederlands usw. ab. - When disposing of used batteries, please comply De SR7500/SR8500 voldoet aan de EMC eisen en de vereisten voor laag-voltage. with governmental regulations or environmental - Es dürfen keine Gegenstände mit offener Español public instruction’s rules that apply in your Flamme, wie etwa brennende Kerzen, auf dem El SR7500/SR8500 está de acuerdo con las normas EMC y las relacionadas con baja country or area. Gerät aufgestellt werden. tensión. - Do not place anything about 0.2 meter above the - Beachten Sie bei der Entsorgung der verbrauch- Italiano top panel. ten Batterien alle geltenden lokalen und überre- gionalen Regelungen. Il SR7500/SR8500 è conforme alle direttive CEE ed a quelle per i bassi voltaggi. - Make a space of about 0.2 meter around the unit. Português - Darauf achten, da§ über dem Gerät ein Frei- raum von mindestens 0.2 meter vorhanden ist. O SR7500/SR8500 conforma com as diretrizes EMC e de baixa voltagem. Fran - Auf allen Geräteseiten mu§ ein Zwischenraum çais Svenska von ungefähr 0,2 meter vorhanden sein. SR7500/SR8500 är tillverkad i enlighet med EMC direktiven och direktiven för - Ne pas exposer l’appareil à la pluie ni à l’humi- lågvoltsutrusning. AVERTISSEMENTS dité. Dansk Nederlands - Ne pas essayer de retirer le boîtier de l’appareil. Model SR7500/SR8500 er i overensstemmelse med EMC-direktiveet og direktivet om lavspænding. - Ne rien insérer dans l’appareil par les orifices de - Stel het apparaat niet bloot aan regen of vocht. ventilation. WAARSCHUWINGEN - Verwijder de afdekplaat van het apparaat niet. - Ne pas manipuler le cordon d’alimentation avec les mains mouillées. - Duw niets door de ventilatieopeningen in het apparaat. - Ne pas recouvrir les ouïes de ventilation avec un objet quelconque comme une nappe, un journal, - Raak het netsnoer niet met natte handen aan. un rideau, etc. - Bedek de ventilatieopeningen niet met enige - Ne placer aucune source de flamme nue, voorwerpen, zoals tafelkleden, kranten, comme une bougie allumée, sur l'appareil. gordijnen, enz. - Pour mettre au rebut les piles usées, respecter - Plaats geen brandende voorwerpen, zoals les lois gouvernementales ou les règlements kaarsen, op het apparaat. officiels concernant l’environnement qui - Volg bij het weggooien van verbruikte batterijen s'appliquent à votre pays ou région. de overheidswetgeving of milieuvoorschriften op - Ne placez aucun object à moins de 0,2 mètre die van kracht zijn in het land of de regio waarin environ du panneau supérieur. u zich bevindt. - Veiller à ce qu’aucun objet ne soit à moins de - Zorg dat er tenminste 0.2 meter vrije ruimte 0,2 mètre des côtés de l'appareil. boven het toestel is. - Zorg dat er 0,2 meter vrije ruimte rond het toestel is.

Italiano Smaltire le pile usate in conformit - Non posare sull'apparecchio sorgenti di fiamme - Non coprire le fessure di ventilazione con - Non toccare il cavo di alimentazione con le mani - Non introdurre oggetti all - Non rimuovere il coperchio dell - Espa Lasciare 0,2 metro liberi tutto intorno l'unit - Non posare alcun oggetto sopra il pannello - No cubra la ventilaci - No maneje el cable de alimentaci - Non esporre l - No introduzca nada en el interior del equipo a - No extraiga la tapa del equipo. - - Deje un espacio de unos 0,2 metro alrededor - No ponga nada a menos de 0.2 metro por - Cuando se eliminen bater - No deben colocarse sobre el equipo elementos - scoperte quali candele accese. tovaglie, giornali, tende od oggetti analoghi. bagnate. chio attraverso i fori di ventilazione. 0,2 m. superiore, lasciando libero uno spazio di circa proprio paese o zona. governative o disposizioni ambientali vigenti nel dit teles, peri manos mojadas. trav No exponga el equipo a la lluvia ni humedad. la unidad. encima del panel superior. bles en su pa normas de protecci cumplirse las reglamentaciones oficiales o con fuego, por ejemplo velas encendidas.

à ñ

. é ol s de los orificios ventilaci ó dicos, cortinas, etc.

’ í

apparecchio alla pioggia o all ADVERTENCIAS

s o en su zona. AVVERTENZE ó ó n medioambiental aplica- n con objetos como man- ’ interno dell í as usadas, deben ’ apparecchio. ó n. à alle norme ó n con las ’ apparec- à ’

. umi-

Svenska - -N Portugu -F Inga f - Deixar um espa - Ao deitar foras as pilhas usadas, favor observar - -N Hantera inte n - Ta inte bort utrustningens h - Uts - Deixar um espa - -N -N -N -N -T Se till att det finns omkring 0,2 meter fri plats - Placera inte n - t humidade. ningar, gardiner e.d. no seu pa com respeito ao meio ambiente que se aplicam os regulamentos governamentais ou as regras acesas, sobre o aparelho. F redor do aparelho. de 0.2 metro acima do painel superior. h f etc. tos tais como toalhas de mesa, jornais, cortinas, atrav m runt omkring enheten. med batterier. ovanf land eller omr ä ö å ö ä ö ã ã ã ã ã ã ã nda stearinljus, b rem len. r inte in f ck inte f lj de lagar och milj o retire a tampa do equipamento. o cobrir os orif o manuseie cabo de alimenta o colocar chamas abertas tais como velas o exponha equipamento o atire nada para dentro do equipamento os molhadas. ä tt inte utrustningen f é ö

ö

å s dos orific ê r apparaten eller enheten.

rem

l som till exempel bordsdukar, dagstid- s í ö ö s ou å rem r ventilations

l med ADVERT å ä å å

de d tsladden med v á

ç l i utrustningen genom ventilations- VARNINGAR gonting n o completamente livre de cerca rea de resid ç í í os de ventila cios de ventila o de cerca 0,2 metro ao ö ö ppen l ä r placeras p ö r du bor n

skyddsr Ê

ö ö NCIAS ppningarna med n r regn eller fukt. ä å rmare ga, som till exempel ö ê lje. å ncia. çã d som g å ä à ta h å çã r du g o. chuva nem utrustningen. ä o com objec- n 0.2 meter çã ä nder. o com as ä ö ller i det r dig av å gra

à Anbring ikke noget n - Dansk -S -N Tild - Kilder til - -R Stik ikke noget ind i udstyret gennem ventilations- - Fjern ikke d - Uds - apparatets overside, du g sterarinlys, m g regler og milj som duge, aviser, gardiner og lignende. m omkring apparatet. hullerne. æ ¿ ¿ å r du skiller dig af med gamle batterier, bedes rg for, at der er et frit omr r ikke ved netledningen med v ldende i dit land eller omr æ æ ¿ re dette i overensstemmelse med de love, t ikke udstyret for regn eller fugt. k ikke ventilations å ben ild, som for eksempel t æ å kslet fra udstyret. ikke anbringes p

¿ ADVARSLER m æ ssige forskrifter, som er æ rmere end 0.2 m over å bningerne med ting å å de p de. å å apparatet. å de h omkring 0,2 æ nder. æ ndte CAUTIONS ON INSTALLATION TABLE OF CONTENTS FOREWORD For heat dispersal, leave at least 20 cm/8 inch of space between the top, back and sides of this unit FOREWORD ...... 1 This section must be read before any connection is and the wall or other components. EQUIPMENT MAINS WORKING SETTING ...... 1 made to the mains supply. • Do not obstruct the ventilation holes.

COPYRIGHT ...... 1 ENGLISH This user guide covers the SR7500 and INTRODUCTION...... 1 SR8500, though the SR7500 is given for the DESCRIPTION...... 2 SURROUND MODE...... 25 title. Explanations of features belonging only to the SR8500 are indicated as “SR8500 20 cm (8 ins.) FEATURES ...... 4 only”. OTHER FUNCTION ...... 29 AV SURROUND RECEIVER SR5500 ACCESSORIES ...... 4 TV AUTO ON/OFFADJUSTING FUNCTION THE TONE ...... 29 ATTENUATION TO ANALOG INPUT SIGNAL ...... 29 (BASS & TREBLE) CONTROL ...... 24 ENTER FRONT PANEL ...... 5 LISTENING TEMPORARILYTHROUGH HEADPHONES TURNING OFF ...... THE SOUND 29 ...... 25 FL DISPLAY AND INDICATER ...... DOLBY 6 HEADPHONEUSING THE MODE SLEEP ...... TIMER ...... EQUIPMENT 29 25 MAINS WORKING VIDEO ON/OFFNIGHT ...... MODE ...... SETTING 29 25 REAR PANEL ...... 7 DISPLAY MODE ...... 29 REMOTE CONTROLLER RC8500SR ..8 SELECTING ANALOG AUDIO INPUT Your Marantz product has been prepared to OR DIGITAL AUDIO INPUT ...... comply 30 with the household power and safety 20 cm (8 ins.) NAMES AND FUNCTIONS ...... RECORDING 8 AN ANALOG SOURCE ...... requirements 30 that exist in your area. LCD INDICATORS ...... SPEAKER 9 A/B ...... SR7500 30 can be powered by 230V AC only. REMOTE CONTROL RANGE ...... 7.1 10 CH INPUT ...... 30 LOADING BATTERIES ...... AUX2 10 INPUT ...... 31 BATTERY REPLACEMENT INTERVAL ...... LIP.SYNC 10 ...... 31 SETTING THE TIME ...... 10 GENERAL INFORMATION OF RC8500SR COPYRIGHT TO SR7500 ...... 11 Recording and playback of any material may BASIC OPERATION (TUNER) ...... 32 require consent. For further information refer to the CONNECTIONS...... 12 LISTENING TO THE TUNER ...... following: 32 PRESET MEMORY ...... — 33 Copyright Act 1956 SPEAKER PLACEMENT ...... 12 RDS OPERATION ...... — 35 Dramatic and Musical Performers Act 1958 INTRODUCTION CONNECTING SPEAKERS ...... 12 CONNECTING AUDIO COMPONENTS ...... 13 — Performers Protection Acts 1963 and 1972 MULTI ROOM SYSTEM...... 36 Thank you for purchasing the Marantz SR7500 CONNECTING VIDEO COMPONENTS ...... 14 — Any subsequent statutory enactments and MULTI ROOM PLAYBACK Surround receiver. ADVANCED CONNECTING ...... 15 orders CONNECTING THE REMOTE CONTROL JACKS ...... 15USING THE MULTI ROOM OUT TERMINALS ...... 36 This remarkable component has been engineered CONNECTING THE ANTENNA TERMINALS ...... MULTI 16 ROOM PLAYBACK to provide you with many years of home theater CONNECTING FOR THE MULTI ROOM ...... 17USING THE MULTI SPEAKER TERMINALS ...... 36 enjoyment. Please take a few minutes to read this OPERATION OF THE MULTI ROOM OUTPUTS manual thoroughly before you connect and WITH THE REMOTE CONTROL operate the SR7500. FROM A SECOND ROOM ...... 36 SETUP ...... 18 As there are a number of connection and ON SCREEN DISPLAY MENU SYSTEM ...... 18 configuration options, you are encouraged to 1 INPUT SETUP REMOTE CONTROLLER OPERATION37 .. discuss your own particular home theater setup (ASSIGNABLE DIGITAL INPUT) ...... 19 CONTROLLING MARANTZ COMPONENTS ...... 37 with your Marantz A/V specialist dealer. 2 SPEAKER SETUP ...... 19 BASIC OPERATION ...... 39 3 PREFERENCE ...... 22 PROGRAMMING MACROS ...... 42 4 PL CLONE MODE ...... 44 II (PRO LOGICII) MUSIC PARAMETER ...... 22 SETUP ...... 45 5 CS II (CIRCLE SURROUNDII) PARAMETER ...... 22 6 MULTI ROOM ...... 23 7 7.1 CH INPUT LEVEL ...... 23TROUBLESHOOTING ...... 46 8 DC TRIGGER SETUP ...... 23 TECHNICAL SPECIFICATIONS ...... 47 BASIC OPERATION (PLAY BACK) .. 24 DIMENSIONS ...... 47 SELECTING AN INPUT SOURCE ...... 24 VIDEO CONVERT ...... 24 SELECTING THE SURROUND MODE ...... 24 ADJUSTING THE MAIN VOLUME ...... 24

1 ENGLISH THX need not be activated for music, movies made ¥ Neo:6 offers a music mode to expand stereo DESCRIPTION especially for TV, or shows such as sports nonmatrix recordings into the five- or six- programming, talk shows, etc. channel layout, in a way which does not diminish This is because they were originally mixed for a the subtlety and integrity of the original stereo small room environment. DTS was introduced in 1994 to provide 5.1 recording. channels of discrete digital audio into home theater THX is a trademark or registered trademark of THX systems. Ltd. Surround EX is a jointly developed technology DTS brings you premium quality discrete THX¨ is an exclusive set of standards and of THX and Dolby Laboratories, Inc. and is a multichannel digital sound to both movies and technologies established by the world-renowned trademark of Dolby Laboratories, Inc. Used under music. film production company, Lucasfilm Ltd. THX authorization. All rights reserved. DTS is a multichannel sound system designed to DTS-ES Extended Surround is a new multichannel resulted from George Lucas’ desire to reproduce create full range digital sound reproduction. digital signal format developed by Digital Theater the movie soundtrack as faithfully as possible both The no compromise DTS digital process sets the Systems Inc. While offering high compatibility with in the movie theater and in the home theater. standard of quality for cinema sound by delivering the conventional DTS Digital Surround format, THX engineers developed patented technologies an exact copy of the studio master recordings to DTS-ES Extended Surround greatly improves the to accurately translate the sound from a movie THX Surround EX—Dolby DIgital Surround EX is a neighborhood and home theaters. 360-degree surround impression and space theater environment into the home, correcting the joint development of Dolby Laboratories and THX Now, every moviegoer can hear the sound exactly expression thanks to further expanded surround tonal and spatial errors that occur. Ltd. as the moviemaker intended. signals. This format has been used professionally When the THX mode of the SR7500 is on, three DTS can be enjoyed in the home for either movies in movie theaters since 1999. distinct THX technologies are automatically In a movie theater, film soundtracks that have been or music on of DVD’s, LD’s, and CD’s. In addition to the 5.1 surround channels (FL, FR, added: encoded with Dolby Digital Surround EX C, SL, SR and LFE), DTS-ES Extended Surround Re-Equalization-restores the correct tonal balance technology are able to reproduce an extra channel “DTS” and “DTS Digital Surround” are registered also offers the SB (Surround Back) channel for for watching a movie in a home environment. which has been added during the mixing of the trademarks of Digital Theater Systems, Inc. surround playback with a total of 6.1 channels. These sounds are otherwise mixed to be brighter program. This channel, called Surround Back, DTS-ES Extended Surround includes two signal for a large movie theater. Re-EQ compensates for places sounds behind the listener in addition to the formats with different surround signal recording this and prevents the soundtracks from being currently available front left, front center, front methods, as DTS-ES Discrete 6.1 and DTS-ES overly bright and harsh when played in a home right, surround right, surround left and subwoofer Matrix 6.1. theater. channels. This additional channel provides the opportunity for more detailed imaging behind the Timbre Matching-filters the information going to The advantages of discrete multichannel systems “DTS”, “DTS-ES and “Neo:6” are trademarks of listener and brings more depth, spacious the surround speakers so they more closely match over matrix are well known. Digital Theater Systems, Inc. ambience and sound localization than ever before. the tonal characteristics of the sound coming from But even in homes equipped for discrete Movies that were created using the Dolby Digital the front speakers. multichannel, there remains a need for high-quality Surround EX technology, when released into the This ensures seamless panning between the front matrix decoding. This is because of the large home consumer market may exhibit wording to that and surround speakers. library of matrix surround motion pictures available effect on the packaging. A list of movies created Adaptive Decorrelation-slightly changes one on disc and on VHS tape; and analog television using this technology can be found on the Dolby surround channel’s time and phase relationship broadcasts. The stereo CD is a 16-bit medium with sampling at web site at www.dolby.com. A list of available with respect to the other surround channel. The typical matrix decoder of today derives a 44.1 kHz. Professional audio has been 20- or 24- DVD software titles encoded with this technology This expands the listening position and creates center channel and a mono surround channel from bit for some time, and there is increasing interest in an be found at www.thx.com. with only two surround speakers the same two-channel matrix stereo material. It is better than higher sampling rates both for recording and for Only receiver and controller products bearing the spacious surround experience as in a movie a simple matrix in that it includes steering logic to delivery into the home. Greater bit depths provide THX Surround EX logo, when in the THX Surround theater with multiple surround speakers. improve separation, but because of its mono, extended dynamic range. Higher sampling rates EX mode, faithfully reproduce this new technology The Marantz SR7500 was required to pass a band-limited surround it can be disappointing to allow wider frequency response and the use of in the home. This product may also engage the rigorous series of quality and performance tests, in users accustomed to discrete multichannel. anti-alias and reconstruction filters with more addition to incorporating the technologies THX Surround EX mode during the playback of 5.1 favorable aural characteristics. channel material that is not Dolby Digital Surround explained above, in order to be THX certified by Neo:6 offers several important improvements as EX eocnded. In such case, the information Lucasfilm Ltd. follow, DTS 96/24 allows for 5.1channel sound tracks to delivered to the Surround Back channel will be THX requirements cover every aspect of ¥ Neo:6 provides up to six full-band channels of be encoded at a rate of 96kHz/24bits on DVD- program dependent and may or may not be very performance including pre-amplifier and power matrix decoding from stereo matrix material. Video titles. pleasing depending on the particular soundtrack amplifier performance and operation, and Users with 6.1 and 5.1 systems will derive six When DVD-video appeared, it became possible to and the tastes of the individual listener. hundreds of other parameters in both the digital and five separate channels, respectively, deliver 24-bit, 96 kHz audio into the home, but only and analog domain. corresponding to the standard home-theater in two channels, and with serious limitations on “SURROUND EX™” is a trademark of Dolby Movies which have been encoded in Dolby Digital, speaker layouts. picture. This capability has had little use. DTS, Dolby Pro Logic, stereo and Mono will all Laboratories. Used under authorization. DVD-audio allows 96/24 in six channels, but a new benefit from the THX mode when being viewed. ¥ Neo:6 technology allows various sound player is needed, and only analog outputs are The THX mode should only be activated when elements within a channel or channels to be provided, necessitating the use of the D/A watching movies which were originally produced steered separately, and in a way which follows converters and analog electronics provided in the for a movie theater environment. naturally from the original presentation. player.

2 DTS 96/24 offers the following: About Dolby Pro Logic IIx HDCD system manufactured under license from 1. Sound quality transparent to the original 96/24 Dolby Pro Logic IIx technology delivers a natural Microsoft. This product is covered by one or more master. and immersing 7.1-channel listening experience to of the following: In the United States 5,479,168 2. Full backward compatibility with all existing the home theater environment. A product of Circle Surround II (CS-II) is a powerful and 5,638,074 5,640,161 5,808,574 5,838,274 decoders. (Existing decoders will output a 48 Dolby's expertise in surround sound and matrix versatile multichannel technology. CS-II is 5,854,600 5,864,311 5,872,531 and in Australia 669,114 with other patents pending. kHz signal) decoding technologies, Dolby Pro Logic IIx is a designed to enable up to 6.1 multichannel surround ENGLISH complete surround sound solution that maximizes 3. No new player required: DTS 96/24 can be sound playback from mono, stereo, CS encoded the entertainment experience from stereo as well sources and other matrix encoded sources. In all carried on DVD-video, or in the video zone of as 5.1-channel encoded sources. DVD-audio, accessible to all DVD players. cases the decoder extends it into 6 channels of surround audio and a LFE/subwoofer signal. The 4. 96/24 5.1-channel sound with full-quality full- Dolby Pro Logic IIx is fully compatible with Dolby CS-II decoder creates a listening environment that motion video, for music programs and motion Surround Pro Logic technology and can optimally places the listener “inside” music performances picture soundtracks on DVD-video. decode the thousands of commercially available and dramatically improves both hi-fi audio “DTS” and “DTS 96/24” are trademarks of Digital Dolby Surround encoded video cassettes and conventional surround-encoded video material. Theater Systems, Inc. television programs with enhanced depth and CS-II provides composite stereo rear channels to spatiality. It can also process any high-quality greatly improve separation and image positioningÐ stereo or Advanced Resolution 5.1-channel music adding a heightened sense of realism to both audio content into a seamless 6.1- or 7.1-channel and A/V productions. listening experience. CS-II is packed with other useful feature like dialog clarity (SRS Dialog) for movies and cinema-like bass enrichment (TruBass). CS-II can enable the Dolby Digital identifies the use of Dolby Digital dialog to become clearer and more discernable in audio coding for such consumer formats as DVD movies and it enables the bass frequencies and DTV. As with film sound, Dolby Digital can contained in the original programming to more provide up to five full-range channels for left, closely achieve low frequenciesÐovercoming the center, and right screen channels, independent left The Dolby Headphone technology provides a low frequency limitations of the speakers by full and right surround channels, and a sixth (“.1”) surround sound listening experience over headphones.octave. channel for low-frequency effects. When listening to multichannel content such as DVD movies over headphones, the listening Circle Surround II, Dialog Clarity, TruBass, SRS Dolby Surround Pro Logic II is an improved matrix experience is fundamentally different than and symbol are trademarks of SRS Labs, Inc. decoding technology that provides better spatiality listening to speakers. Since the headphone Circle Surround II, Dialog Clarity and TruBass and directionality on Dolby Surround program speaker drivers are covering the pinna of the ear, technology are incorporated under license from material; provides a convincing three-dimensional the listening experience differs greatly from SRS Labs, Inc. soundfield on conventional stereo music traditional speaker playback. Dolby utilizes recordings; and is ideally suited to bring the patented headphone perspective curves to solve surround experience to automotive sound. While this problem and provides a non-fatiguing, conventional surround programming is fully immersive, home theater listening experience. compatible with Dolby Surround Pro Logic II Dolby Headphone also delivers exceptional 3D (SR8500 only) decoders, soundtracks will be able to be encoded audio from stereo material. HDCD¨ (High Definition Compatible Digital ¨) is a specifically to take full advantage of Pro Logic II patented process for delivering on Compact Disc playback, including separate left and right Manufactured under license from Dolby the full richness and details of the original surround channels. (Such material is also Laboratories. “Dolby”, “Pro Logic”, and the double- D symbol are trademarks of Dolby Laboratories. microphone feed. compatible with conventional Pro Logic decoders.) HDCD encoded CDs sound better because they are encoded with 20-bits of real musical Dolby Digital EX creates six full-bandwidth output information as compared to 16-bits for all other channels from 5.1-channel sources. This is done CDs. using a matrix decoder that derives three surround HDCD overcomes the limitation of the 16-bit CD channels from the two in the original recording. format by using a sophisticated system to encode For best results, Dolby Digital EX should be used the additional four bits onto the CD while remaining with movies soundtracks recorded with Dolby completely compatible with the CD format. Digital Surround EX. When listening to HDCD recordings, you hear more dynamic range, a focused 3-D sound stage, and extremely natural vocal and musical timbre. With HDCD, you get the body, depth and emotion of the original performance not a flat, digital imitation.

3 ENGLISH The new generation of Marantz Receivers is stylish FM Antenna FEATURES and completely symmetrical. On the front panel of ACCESSORIES the SR7500, buttons are kept to a minimum. Source selectors and volume controls are intuitively placed. Remote Controller RC8500SR The SR7500 incorporates the latest generation of The SR7500 is here to perform in your unrivaled digital surround sound decoding technology such

home entertainment setup. POWER as Dolby Digital EX, Dolby Digital, DTS ES OFF ON/OFF ON SOURCE (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, M ¥ THX / THX Surround EX D1 Music), Dolby Pro-Logic II (Movie, Music and D2 ¥ Dolby Digital EX, Dolby Digital, DTS ES D3 Game), Dolby Pro-Logic IIx (Movie, Music and D4 (Discrete 6.1, Matrix 6.1, Neo:6) D5 Game), Circle Surround II (Cinema, Music and D5 Front AUX Jack Cover ¥ Dolby Pro Logic II (Movie, Music, Game) CH VOL Mono). ¥ Dolby Pro Logic IIx (Movie, Music, Game) OK PUSHPUSH In addition, Marantz has focused on the future. By ¥ Circle Surround II (Cinema, Music, Mono) LIP.SYNC PREV MUTE utilizing pre-out jacks, 7.1 direct inputs and a RS-232C GUIDE MENU EXIT ¥ MRAC (Marantz Room Acoustic Calibration) TEST CH.SEL SURR 1 2 3 communication port, the SR7500 is tomorrow’s 7.1CH ATT SPK-AB × 4 5 6 ¥ 7 105 Watts (8 Ohms), Discrete Amplifiers DISP OSD SLEEP technology, today! 7 8 9 (SR8500: 7 × 110 Watts) CLEAR THX0 MEMO ¥ High Power Current Feedback Circuitry

TV DVD VCR DSS

• THX Select certified ¥ Massive Energy Power Supply, Huge EI TUNER CD CD-R MD User Guide

TAPE AUX1 AUX2 AMP

LIGHT 7ch amplifiers have enough power for even the Transformer, Large ELCO’s. 12 RC8500SR most difficult conditions found in large rooms. ¥ 192 kHz/24 bit Crystal¨ DAC for all 8 Channels Learning Remote Controller Enormous power reserves endow the system with ¥ 32 bit Digital Surround Processing Chipsets substantial dynamic ability at high sound levels. ¥ Video Off Mode Microphone MC-10 105 watts (SR7500) / 110 watts (SR8500) to each ¥ Large Heavy Duty Speaker Terminals for all of the 7 main channels the power amp section Channels features an advanced, premium high-storage ¥ RS-232C Terminal for Future Upgrade or power supply capacitors, and fully discrete output System Control stages housed in cast aluminum heat sinks . ¥ Set Up Menu via all Video Output (Composite, S-Video and Component video) The SR7500 incorporates the most advanced ¥ Auto Input Signal Detection Digital Signal Processing circuitry, along with a ¥ Improved Station Name Input Method, 50 Crystal¨ 192 kHz/24 bit D/A converter in each of Presets AC cable the 7 channels. Independent power supply circuits ¥ Auto Adjust Function for Speaker Distance are incorporated for the FL display, audio and Settings (Delay Time) video sections for maximum separation, clarity ¥ Front Optical AUX Input and dynamic range. Together with hand-selected (Digital Camera, Portable DVD) customized components, all elements work in ¥ Assignable DC Trigger Output harmony to recreate the emotion, exactly as the ¥ Programmable, learning remote control artist had intended. ¥ Flasher Input ¥ Video convert system (Composite Video ↔ The SR7500 is designed and engineered with S Video → Component Video) AAA-size batteries × 3 extensive feedback from custom installation ¥ Assignable DVI-D INPUT (SR8500 only) experts, dealers and consumers. It features multi- ¥ HDCD (SR8500 only) room/multisource, assignable DC trigger, a RS- ¥ Copper Plate Chassis (SR8500 only) 232C communication port, Flasher input, heavy ¥ Troidal Core Transformer (SR8500 only) duty speaker binding posts and an extensive array of both analog and digital inputs / outputs. With 6 assignable digital inputs (7 total), 4 component inputs, SACD Multi Channel (7.1 channel) direct AM Loop Antenna inputs video convert system and a speaker-B and OSD output versatility is taken to a stunning new level. Furthermore, the SR7500 can output the OSD information through the Y/C (S-video) and composite video outputs.

An easy-to-use programmable, learning remote control allows full access to all of the operating functions and can be used for system operation as well.

4 y MULTI (Multi Room) button !4 AUX1 INPUT jacks FRONT PANEL Press this button to activate the Multiroom system. These auxiliary video/audio input jacks accept the “MULTI” indicator will be illuminated in the display. connections of a camcorder, portable DVD, game etc. When not using these jacks, protect with the included jack covers. u MULTI SPEAKER button q w e r t yu i o !0 !1 !2 !3 !4 ENGLISH Press this button to activate the Multiroom Speaker system. “MULTI” indicator will be illuminated in the How to Attach the Front AUX Jack Cover AV SURROUND RECEIVER SR7500 display. (See page 36)

INPUT SELECTOR VOLUME

i BAND button UP DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT DIGITAL L C R LFE AAC PCM Press this button to switch between FM and AM in SL S SR DOWN UP

the TUNER mode. AUX 1 INPUT DIGITALS-VIDEO VIDEO L AUDIO R

o T-MODE button Press this button to select the auto stereo mode or PUSHPUSH STANDBY ENTER AUX 1 INPUT POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO LAUDIO R mono mode when the FM band is selected. The “AUTO” indicator lights in the auto stereo mode. (See page 32) Front AUX Jack Cover !0 MEMORY button Press this button to enter the tuner preset memory !5 PURE DIRECT button numbers or station names. (See page 33) !5 !6 !7 !8 !9 @0@1 @2 @3 When this button is pressed, the tone control circuitry is bypassed as well as Bass Management. !1 CLEAR button “PURE DIRECT” indicator will be illuminated in the Press this button to cancel the station-memory display. q POWER switch and STANDBY indicatore HEADPHONE jack for stereo headphonessetting mode or preset scan tuning. (See page 33) Notes: Press the button to turn the power ON, and press This jack may be used to listen to the SR7500’s • The surround mode is automatically switched to again to turn it OFF. If the POWER switch is in the output through a pair of headphones. Be certain AUTO when the pure direct function is turned on. ON position, the power of this unit can be turned that the headphones have a standard 1/4” stereo !2 INFRARED receiving sensor window • Additionally, Speaker Configurations are fixed ON/OFF by pressing the POWER button on the phono plug. Note that the main room speakers will This window receives infrared signals for the remote control. automatically as follows. remote control unit. automatically be turned off when the headphone Front SPKR = Large, Center SPKR = Large, When this unit is in the standby mode with the jack is in use. Surround SPKR = Large, Sub woofer = On POWER switch set to the ON position, pressing Notes: the ENTER button also allows to turn the power on. !3 VOLUME control knob • When using headphones, the surround mode will The STANDBY indicator lights up when this unit is Adjusts the overall sound level. Turning the control !6 THX button the standby mode (power OFF) by the remote change to STEREO and Dolby Headphone by clockwise increases the sound level. MENU and Cursor button. Press this button to select THX processing for control unit. input source. • The surround mode returns to the previous setting as soon as the headphone plug is removed from w INPUT SELECTOR knob (AUDIO/ VIDEO)the jack. !7 7.1CH INPUT button This knob is used to select the input sources. Press this button to select the output of an external The video function selectors, such as TV, DVD, r multichannel player. VCR1, DSS and AUX1 select video and audio SURROUND MODE button simultaneously. You can select the surround mode by pressing this Audio function sources such as CD, TAPE, CD-R/ button. !8 MENU button MD, TUNER and AUX2 may be selected in This button is used to enter the SETUP MAIN conjunction with a Video source. t AUTO (Auto surround) button MENU. This feature (Sound Injection) combines a sound Press this button to select the AUTO mode from from one source with a picture from another. the surround modes. When this mode is selected, Choose the video source first, and then choose a !9 Cursor (, , , ) / ENTER button the receiver determines the surround mode different audio source to activate this function. Use these buttons when operating the SETUP corresponding to a digital input signal MAIN MENU and TUNER function. automatically.

5 ENGLISH @0 EXIT button FL DISPLAY AND INDICATER ¡4 SIGNAL FORMAT indicators This button is used to exit from the SETUP MAIN 2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24, MENU. PCM When the selected input is a digital source, some s f h k¡0¡1 ¡3 of these indicators will be illuminated to display the @1 DISPLAY button specific type of signal in use. When this button is pressed, the FL display mode a d g j l ¡2 ¡4 is changed as Surround Mode → Auto-display Off → Display Off → Input Function and the display off ¡5 ENCODED CHANNEL STATUS indicators indicator (DISP) lights up in condition of DISPLAY DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND These indicators display the channels that are DIGITAL OFF. SLEEP AUTO SURR DISC 6.1 MTX 6.1 SPKR AB DIGITAL encoded with a digital L C R input signal. If the selected digital input signal is PCM LFE Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, @2 MRAC button / MIC jack SL S SR “SL”, “SR” and “LFE” will be illuminated.If the Press to automatically measure speaker digital input signal is 2 channel PCM-audio, “L” and characteristics using the included microphone “R” will be displayed. (MC-10). (See page 21) If Dolby Digital 5.1ch signal with Surround EX flag ¡8¡7 ¡6 ¡9 ¡5 or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” , “SR” and “LFE” will be illuminated. @3 SPEAKER A/B button Press this button to select speaker systems A and/ or B. a DISP (Display Off) indicator j V (video)-OFF mode indicator ¡6 Main Information Display This indicator is illuminated when the SR7500 is in This indicator is illuminated when the Video-OFF This display shows messages relating to the the display off condition. function is active. status, input source, surround mode, tuner, Opening and closing the front panel door volume level or other aspects of unit’s operation. When you want to use the controls behind the front s SLEEP timer indicator k NIGHT mode indicator panel door, open the door by gently pressing on This indicator is illuminated when the sleep timer This indicator is illuminated when the SR7500 is in ¡7 THX indicator the lower part of the panel. Keep the door closed function in the main-room is in use. the Night mode, which reduces the dynamic range when not using these controls. This indicator illuminated when the SR7500 is in of digital program material at low volume levels. the THX mode. d Multi-room system indicator This indicator is illuminated when the multi-room l SPKR (speaker) AB indicator ¡8 AV S PURE DIRECT indicator IN URR PU OUND T S E L RECEIVER SR7 EC TO R 50 0 system is active. Active speaker system will be illuminated by this This indicator is illuminated when the SR7500 is in indicator. the PURE DIRECT mode.

DISP S TA ND MULTI BY SLEEP P AUTO OW AUTO ER O SURR TUNED N/O FF DIRECT ST SPKR A B DISC 6.1

V-OFF MTX 6.1 f PEAK AUTO SURR (Auto Surround mode) NIGHT ATT PHONES ANALOG DIGITAL S URR O AAC D UN IGIT D AL PCM L C LF R SL E S ¡0 SR indicator PEAK indicator ¡9 VOLUME HDCD indicator (SR8500 only)

E NT ER

DOW This indicator is a monitor for an analog audio input N This indicator is illuminated to show that the AUTO When HDCD signal is decoded, this indicator will signal. If the selected analog audio input signal is UP SURROUND mode is in use. light up.

DIG IT AL greater than the capable level of internal

S -VI D AU EO X 1 I NP UT VID EO

L A UD IO R processing, this will illuminate. If this happens, you g TUNER’s indicators should press the ATT button on the remote. AUTO : This indicator illuminates when the tuner’s Auto mode is in use. Notes: TUNED : This indicator illuminates when a ¡1 ATT (Attenuation) indicator • Be careful not to pinch your fingers between the station is being received with This indicator is illuminated when the attenuation door and the panel. sufficient signal strength to provide function is active. acceptable listening quality. ST(Stereo) : This indicator illuminates when an ¡2 FM station is being tuned into DIGITAL Input Indicator stereo condition. This indicator lights when a digital input has been selected. h DTS-ES mode indicators ¡3 ANALOG input indicator (DISC6.1, MTX6.1) This indicator is illuminated when an analog input These indicators will illuminate to show the DTS- source has been selected. ES decoding mode (Discrete 6.1 or Matrix 6.1).

6

SR7500N DFU_01_ENG 1_3 Page 6 04.10.8, 2:53 PM Adobe PageMaker 6.5J/PPC y RS-232C !2 Subwoofer Output REAR PANEL The RS-232C port is to be used in conjunction with Connect this jack to the line level input of a powered an external controller to control the operation of subwoofer. If an external subwoofer amplifier is the SR7500 by using an external device. used, connect this jack to the subwoofer amplifier qw yue!5 r t i o The RS-232C port may also be used in the future input. If you are using two subwoofers, either

to update the operating software of the SR7500 so powered or with a 2 channel subwoofer amplifier, ENGLISH that it will be able to support new digital audio connect a “Y” connector to the subwoofer output DVD DSS/VCR2 formats and the like as they are introduced. jack and run one cable from it to each subwoofer amplifier. MONITOR OUT COMPONENT ANTENNA VIDEO OFF u SPEAKER C Preamp Outputs FM (75‰) GND AM ON CB CR CB CR IN OUT CB CR !3 YY/ / Y / / / / TV DVD PB PR PB PR PB PR (L, R, SL, SR, SBL, SBR, C) 7.1 CHANNEL or AUX2 INPUT TV VCR1 VIDEO IN OUT S-VIDEO

RL AC OUTLET By connecting a DVD Audio player, SACD VCR1 DSS/VCR2 Jacks for L(front left), R (front right), C (Center), SL IN OUT IN OUT OUT 230V 50/60H SWITCHED VCR1 multichannel player, or other components that has MONITOR MULTI TV DVD DSS/VCR2 MONITOR (surround left), SR (surround right), SBL (surround OUT OUT 100W MAX. INPUT-1 INPUT-2 OUTPUT DVI-D a multichannel port, you can playback the audio SURROUND BACK/ back left) and SBR (surround back right). @0 MULTI SPEAKER/ SPEAKER C AC IN Z with 5.1 channel or 7.1 channel outputs. DIGITAL IN DIGITAL OUT RC-5 MULTI RC FLASHER INL SL SBL Use these jacks for connection to external power 5 6 COAX. IN 12 C amplifiers. 4 RS-232C PRE 2 3 !4 OPT. CD TAPE CDR/MD LSLOUT SBL DC TRIGGER output terminal OUT 1 MULTI C R LLRL R i Connect a device that needs to be triggered by DC 12DC OUT AC INLET RSWSR SBR TV DVD VCR1 DSS/VCR2 7.1CH Plug the supplied power cord into this AC INLET under certain conditions (screen, power strip, IN L FRONT A FRONT B CENTER SURROUND etc…) SPEAKER SYSTEMS and then into the power outlet on the wall. FRONT A OR B, CENTER, SURR, SURR BACK AUDIO - 8 OHMS OUTIN OUT IN OUT IN OUT SBR SW FRONT A: 6+ B : 8 OHMS SR7500 can be powered by 230V AC only. Use the system OSD setup menu to determine the OUT R conditions by which these jack will be active.

IN R SR o Note: (AUX2) AC OUTLETS Connect the AC power cable of component such • This output voltage is for (status) control only, It !9 !8 !7 !6 !5 !4 !3 !2 !1 !0 is not sufficient for drive capability. as a DVD or CD player to this outlet. The marked SWITCHED provides power only when the SR7500 is turned on and is useful for !5 Multiroom Outputs (Audio L&R, Video) q VIDEO IN/OUT (TV, DVD, VCR1, DSS/VCR2)e COMPONENT VIDEO INPUT/OUTPUT components which you use every time you play These are the audio and video output jacks for the These are the video inputs and outputs. There are If your DVD player or other device has component your system. Multi zone (Multi room). 4 video inputs and 2 video outputs and each one video connectors, be sure to connect them to these Caution: Connect these jacks to optional audio power includes both composite video and S-video component video connectors on the SR7500. The amplifiers or video display devices to listen and configurations. Connect VCRs, DVD players, and SR7500 has 4 component video input connectors • In order to avoid potential turn-off thumps, anything view the source selected by the multiroom system other video components to the video inputs. to obtain the color information (Y, CB, CR) directly plugged into these outlets should be powered up in a remote room. The 2 video output channels can be used to be from the recorded DVD signal or other video before the SR7500 is turned on. connected to video tape recorders for making component and one component video output • The capacity of this AC outlet is 100W. Do not recordings. connector to output it directly into the matrix connect devices that consume electricity more than !6 MULTI ROOM REMOTE IN/OUT terminals the capacity of these AC outlet. If the total power decoder of the display device. IN: Connect to a multi-room remote control By sending the pure DVD component video signal consumption of the connected devices exceeds the w FM antenna terminal (75 ohms) capacity, the protection circuit shuts down the device, available from your Marantz dealer. directly, the DVD signal forgoes the extra OUT: Connect to the Marantz component Connect an external FM antenna with a coaxial power supply. processing that normally would degrade the equipped with remote control (RC-5) cable, or a cable network FM source. image. The result is vastly increased image terminals in Multi zone (Multi room). quality, with incredibly life like colors and crisp !0 Speaker outputs terminals AM antenna and ground terminals detail. Seven terminals are provided for the front (A) left, Connect the supplied AM loop antenna. Use the !7 REMOTE CONT. IN/OUT terminals terminals marked “AM” and “GND”. The supplied front (A) right, front (B) left, front (B) right, front Connect to a Marantz component equipped with AM loop antenna will provide good AM reception in r FLASHER IN (Flasher input terminal)center, surround left and surround right speakers. remote control (RC-5) terminals. most areas. Position the loop antenna until you These terminals are to control the unit from each hear the best reception. zone. Connect the control signal from a Keypad, !1 Speaker outputs terminals (SURROUND etc. BACK / MULTI SPEAKER / SPEAKER C) Two terminals are provided for the front left, and t MONITOR OUT right speakers for multi room (2nd zone) or These are monitor outputs and each one includes surround back. both composite video and S-video configurations. The terminals can be used to connect a third set of When connecting two video monitors or televisions, speakers by setting the SPEAKER C selector be aware that the OSD interface can be used with switch to ON. For connection and use, see page both MONITOR OUT connections. 17. 7 ENGLISH !8 AUDIO IN/OUT (CD, TAPE, CD-R, TV, z Infrared Transmitter and Learning , MUTE button DVD, VCR1, DSS/VCR2) REMOTE CONTROLLER Sensor This button is used to mute the audio for the These are the analog audio inputs and outputs. This transmitter emits infrared light. Press the SR7500 and television. There are 7 audio inputs (4 of which are linked to RC8500SR buttons while pointing the transmitter towards the Note: video inputs) and 4 audio outputs (2 of which are infrared receiver window of the SR7500 or other • Set the AMP mode to use this button with the linked to video outputs). The audio jacks are AV equipment. Be sure to also point towards other SR7500. nominally labeled for cassette tape decks, NAMES AND FUNCTIONS remote controls when using the learning function. compact disc players, DVD players and etc.... The audio inputs and outputs require RCA-type . x GUIDE button connectors. z POWER ON and OFF buttons This button is used to display the menus for the (When AMP mode is selected) DVD player, DSS (satellite broadcasting tuner), or !9 These buttons are used to turn the SR7500 on or other AV equipment. DIGITAL INPUT (Dig.1 - 6) / OUTPUT off. (coaxial, optical) (when AMP mode is selected) POWER OFF ON This button is used to select the LIP.SYNC mode. These are the digital audio inputs and outputs. ON/OFF x There are 3 digital inputs with coaxial jacks, 3 with c SOURCE ON/OFF button SOURCE optical jacks. c This button is used to turn a specific source (such ⁄0 EXIT button The inputs accept digital audio signals from a M as a DVD player) on or off independently from the (when AMP mode is selected) compact disc, LD, DVD, or other digital source D1 v rest of the system. component. This button is used to cancel settings in the setup For digital output, there is 1 coaxial output and 1 D2 menu. ¤1 v M (Mode) button optical output. D3 b The digital outputs can be connected to MD This button is used to program Macros. Pressing D4 ⁄1 Numeric buttons recorders, CD recorders, DAT decks, or other this button switches between Normal mode and similar components. Macro mode. These buttons are used to switch between 0 to 9 of D5 The > button is used to move to the next page. Up the source components. If the source is set to the ¤0 D5 n to 20 programs (4 pages) can be made. Holding amplifier, these buttons are used to perform @0 DVI-D INPUT / OUTPUT (SR8500 only) down the M button for three seconds or more operations. CH VOL This unit has two DVI-D inputs and one DVI-D switches to the Setup mode, where the Setup (when AMP mode is selected) output. The input function can be selected from the menu is shown on the LCD. The Setup menu has (1) TEST button SETUP MAIN MENU. four pages, and the > button is used to move to the Used to enter the test tone menu. ⁄9 OK m next page. Pressing the > button from page 4 returns you to page 1. (2) CH SEL. (channel select) button Used to call up SETUP MAIN MENU and adjust

⁄8 LIP·SYNC , speaker levels or 7.1 ch input level.

PREV MUTE b D1 to D5 (Direct) buttons (3) SURR (surround) button GUIDE . Five types of direct operations can be performed MENU EXIT Used to select the surround mode. TEST CH.SEL SURR for each of the 12 source buttons such as the DVD, ⁄7 1 2 3 ⁄0 television, amplifier, and other AV equipment. The (4) 7.1CH button 7.1CH ATT SPK-AB pages can be switched, so 4 pages × 5 types = 20 Press this button to select the output of an external 4 5 6 ⁄1 multi channel decoder. DISP OSD SLEEP operations can be performed for a single source. 7 8 9 The text display can also be changed. (5) ATT button When the input signal is too high and the voice ⁄6 CLEAR THX0 MEMO ⁄2 distorts even by throttling the SR7500 VOLUME n > (Page) button control, turn on this function. “ATT” is indicated ⁄3 This button is used to switch pages for the Direct when this function is activated. button. The current page is shown on the LCD. The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”. TV DVD VCR DSS m VOL (Volume) button Note: TUNER CD CD-R MD ⁄4 This button is used to adjust the volume for the • This function is unavailable during the digital TAPE AUX1 AUX2 AMP amplifier and television. input is selected.

LIGHT 12⁄5 Note: (6) SPK-AB button RC8500SR Speaker mode is switched in the following Learning Remote Controller • Set the AMP mode to use this button with the SR7500. sequence. A → B → A+B → off

8 (7) DISP. button ⁄7 MENU button I NAME indicator Selects the display mode for the front display of the LCD INDICATORS (when AMP mode is selected) This is displayed when the remote control is in SR7500. Information about currently selected source and This button is used to call up the SETUP MAIN renaming mode. direct code names are displayed on the LCD. (8) OSD button MENU of the SR7500. When this button is pressed, the current setting are J LEARN indicator displayed on the TV monitor. ENGLISH ⁄8 PREV (Previous) button A This is displayed when the remote control is in (9) SLEEP (sleep timer) button learning mode. This button is used for setting the sleep timer. It This button is used to return to the previous can be operated the same way as the button in channel on the television or other device. unit. Note: (0) THX button • This button is unavailable for SR7500. Use this button to select the THX mode. J LEARN

NAME B ⁄9 CH (Channel) button I ⁄2 MEMO button This is used to change channels. H MACRO This button is used to store settings to memory or G program a source. ¤0 CURSOR buttons F

These buttons are used when controlling the USE E PAGE 1234 C ⁄3 CONTROL button cursor of the SR7500, DVD, or other AV Thses buttons are used when operating the PLAY, equipment. D STOP, PAUSE, and other commands of a source. A Note: Source Name indicator ¤1 LCD This displays the name of the selected source, • This button is unavailable for the SR7500. Information about the sources and modes are such as DVD, television, or other AV equipment shown on the LCD. (up to five characters). ⁄4 SOURCE button Thses buttons are used to switch the source of B Direct Button Name indicator your A/V Receiver / amplifer. Each time a source This displays up to 20 types of button names for button is pressed, the remote control changes to each source. (up to six characters) the source which was pressed. This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier C Page indicator source, press this button twice within two seconds. This displays the current page position. The signal is sent when it is pressed the second time. D Note: Transmission indicator This lights up when the remote control is sending a • Select the AMP as the source to use this remote signal. controll with the SR7500.

E USE indicator ⁄5 LIGHT 1 and 2 buttons This is displayed under normal operation. Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only F Battery Level indicator while this button is pressed. The operations for This is displayed when the battery level is low. LIGHT 1 and 2 are identical. G ⁄6 TIMER indicator CLEAR button This is displayed when the macro timer is set. This button is used to erase the memory or program of a source. H MACRO indicator This is displayed when the remote control is in macro programming mode.

9 ENGLISH REMOTE CONTROL RANGE 3. Close the cover until it clicks. BATTERY REPLACEMENT INTERVAL SETTING THE TIME The distance between the transmitter of the Under normal usage, alkaline batteries last Example: Setting to 6:20PM (18:20) remote control and the IR SENSOR of the SR7500 approximately four months. When the batteries 12 should be less than 5 meters. If the remote control wear out, a battery mark is displayed on the LCD.

is pointed in a direction other than the IR SENSOR Although the remote control can still be used when POWER OFF ON/OFF ON or if there is an obstacle between them, use of the the battery mark is displayed, the batteries should SOURCE 3. remote control may not be possible. be replaced as soon as possible. The LCD M eventually starts to flash when buttons are D1 pressed, the remote control will be unable to D2 Remote-controllable range D3 3. transmit signals or learn codes. D4 USE PAGE 1 USE PAGE 12 SR7500 D5 2. CAUTIONS ON BATTERIES ¥ This remote control uses non-volatile memory D5 CH VOL 34 ¥ Use “AAA” type batteries in this remote control so that the learned codes and macro programs are retained even if the batteries are removed. unit. OK AV SURROUND RECEIVER SR7500 INPUT SELECTOR Reset the clock after replacing the batteries.

DISP STANDBY SLEEPMULTI ¥ If the remote control unit does not operate from POWER ON/OFF AUTO

AUTO SURR TDIRUNEDECT

ST SPKR A B DISC 6.1 LIP.SYNC LEARN V-OFF LEARN MTX 6.1 PEAK

NIGHT ATT PHONES ANALOG DIGITAL

SURROUND

AAC DIGITAL 6.

L PREV PCM MUTE C LFE R SL S SR close to the main unit, replace the batteries with VOLUME GUIDE

ENTER Approx. 5 m DOWN MENU EXIT TEST CH.SEL SURR UP new ones, even if less then a year has passed. Safety Precautions for Batteries 1 2 3 4.

AUX 1 INPUT DIGITAL S-VIDEO VIDEO L AUDIO R 7.1CH ATT SPK-AB ¥ The included battery is only for verifying Be sure to always observe the following 4 5 6 60° DISP OSD SLEEP 5. operation. Replace it with a new battery as soon precautions to prevent fluid leakage, overheating, 7 8 9 fire, breakage, accidental ingestion, and other CLEAR THX0 MEMO O F F P O O as possible. N W 56 /O E S F R O F U R O C N E

M D1 D 2 D C 3 H D 4 accidents.

MENU D 5 1 VOL O D K 5 4 PR E 7 V T E ST GU ¥ When inserting the batteries, be careful to do so 7 .1 IDE C CH.SEL H MUTE D IS 2 P A E TT S X CL 5 U I O R T S 3 R E D S AR P 8 K -A 6 B 0 SL EEP ¥ If the batteries are left unused for a long period 9 T DV M V D E T M U O N T E A R P C D VC DVD VCR DSS E TV A R 1 UX1 C D D -R S A S U M in the proper direction, following the + and - Le X D a 2 rning A R LI M Re C G 14 HT P mote 00

C on trol ler

2 of time, the battery fluid may leak or the batteries marks in the remote control unit’s battery TUNER CD CD-R MD LEARN may corrode. TAPE AUX1 AUX2 AMP Remote control unit (RC8500SR) compartment. LIGHT 12

RC8500SR ¥ Do not use the batteries in the remote control Learning Remote Controller ¥ To prevent damage or battery fluid leakage: with the plus and minus polarity reversed. - Do not use a new battery with an old one. USE PAGE 12 ¥ Do not attempt to recharge, heat, or disassemble - Do not use two different types of batteries. the batteries. Do not put the batteries in a fire. LOADING BATTERIES - Do not short-circuit, disassemble, heat or When you bought this remote control and insert The life of the batteries used with the remote control dispose of batteries in flames. ¥ Do not use the remote control with old batteries the batteries to the remote control at first, the steps or worn-out batteries inserted. is about 4 months with normal use. Also be sure to ¥ Remove the batteries when not planning to use 1 to 3 are skipped. replace batteries earlier when you notice that they the remote control unit for a long period of time. ¥ Do not use different types of batteries or mix old Starts from step 4 to set the time. are getting weak. and new batteries in the remote control. ¥ If the batteries should leak, carefully wipe off the Hold down the M button for three seconds or 1. Remove the back cover. fluid from the inside of the battery compartment, ¥ If the remote control is not operating properly, 1. then insert new batteries. replace the batteries with new ones. more. The menu is displayed. ¥ When disposing of used batteries, please ¥ If any of the batteries are leaking, completely Press the > button once. comply with governmental regulations or wipe up all leaked battery fluid, and then replace 2. environmental public instruction’s rules that the batteries with new ones. This displays second page (SETUP). apply in your country or area. 3. Press the D4 (CLOCK) direct button. The “ ” indicator blinks and the clock indicator displays “0:00”. 4. Press the 1 and 8 numeric button to set the hour indicator. The hour indicator displays “18”. Insert the new batteries (AAA type) with 2. The minute indicator blinks “_”. correct and polarity. 5. Press the 2 and 0 numeric button to set the minute indicator. The minute indicator displays “20”. The hour indicator blinks. 6. Press the OK cursor button to start the clock. The clock starts from 0 second at the time that was set and return to normal (USE) mode. Whenever the batteries are replaced, the clock shows 00:00. Please reset the clock. (The time setting is not backed up.) 10 CHECKING THE TIME AMP MODE SOURCE ON/OFF Turns the SR7500 on and off To check the time, hold down the > button for three POWER ON Turns the SR7500 on seconds or more. The current time is displayed for five seconds. POWER OFF Turns the SR7500 off

POWER D1 - D5 / >(Page) (Refer to page vi) Note: OFF ON/OFF ON

ENGLISH • Although the remote control uses a quartz clock, SOURCE VOL +/- Adjust the over all sound level the time may become out of sync over the course M MUTE Decreases the sound temporarily D1 of operation. Be sure to correct the clock from D2 Cursor Move the cursor for setting in “On screen display” mode D2 time to time. D3 D4 D3 OK Enter the “On screen display”

USE PAGE 1234

D5 D4 Confirms the setting in “On screen display” mode D5 GENERAL INFORMATION OF CH VOLD5 MENU Displays the current setting on the monitor EXIT Exits from SETUP MENU RC8500SR TO SR7500 OK TEST (1) Enter the test tone menu To control the SR7500 by your RC8500SR, you LIP.SYNC CH.SEL (2) Call up SETUP MENU and adjusts speaker levels or 7.1ch have to select the device AMP or TUNER by PREV MUTE GUIDE

MENUMENU EXIT pressing the function selector button. Please refer TEST CH.SEL SURR input level 1 2 3 below for the details in AMP and TUNER mode. 7.1CH ATT SPK-AB 4 5 6 SURR (3) Selects the surround mode DISP OSD SLEEP 7 8 9 7.1CH (4) Selects the 7.1CH IN CLEAR THX0 MEMO ATT (5) Reduces the input level SPK-AB (6) Selects the speaker system TV DVD VCR DSS

TUNER CD CD-R MD DISP (7) Changes the front display mode

TAPE AUX1 AUX2 AMP

LIGHT OSD (8) Selects the “On screen display” on and off 12

RC8500SR Learning Remote Controller SLEEP (9) Sets the sleep timer function THX (0) Selects the THX mode Function selector Selects a particular source component GUIDE / LIP.SYNC Selects the LIP.SYNC mode TUNER MODE

POWER OFF ON/OFF ON D1 - D5 / >(Page) (Refer to page vi)

SOURCE CH +/- Selects a preset station up and down M D1 GUIDE Selects the “Frequency direct input” D2 D2 D3 0Ð9 Input the numeric D4 D3 USE PAGE 1 MEMO Enter the tuner preset memory numbers D5 D4 D5 CLEAR Clears the inputting CH VOLD5 TUNER Selects a frequency band

OK

LIP.SYNC

PREV MUTE

GUIDE

MENU EXIT

TEST CH.SEL SURR 1 2 3

7.1CH ATT SPK-AB 4 5 6

DISP OSD SLEEP 7 8 9

CLEAR THX0 MEMO

TV DVD VCR DSS

TUNER CD CD-R MD

TAPE AUX1 AUX2 AMP

LIGHT 12

RC8500SR Learning Remote Controller 11 ENGLISH Surround left and right speakers CONNECTING SPEAKERS CONNECTIONS When the SR7500 is used in surround operation, the preferred location for surround speakers is on SPEAKER PLACEMENT the side walls of the room, at or slightly behind the listening position. POWERED SURROUND BACK SURROUND The ideal surround speaker system for this unit is The center of the speaker should face into the PASSIVE POWER SUBWOOFER 7-speaker systems, using front left and right room. SUBWOOFER AMPLIFIER RIGHT LEFT RIGHT LEFT or INVERT INPUT INPUT BTLEXT. CONT. IN REMOTE CONT. speakers, a center speaker, surround left and right OUTPUT LEVEL MASTER SLAVE

MIN MAX VIDEO/ SYSTEM OUT OUT IN Surround back left and right speakers +5~13V DC

S speakers, a surround back left and right speakers, FU E Surround back speakers are required when a full and a subwoofer. 7.1-channel system is installed. SPEAKER SYSTEM For best results we recommend that all front MINIMUM 4 OHMS Speakers should be placed on a rear wall, behind speakers be of the same type, with identical or DVD DSS/VCR2 the listening position. similar driver units. This will deliver smooth pans The center of the speaker should face into the MONITOR OUT across the front sound stage as the action moves ANTENNA COMPONENT room. INVIDEO OUT from side to side. TV DVD OFF IN OUT SPEAKER C FM (75½) GND AM AC OUTLET Your center channel speaker is very important as Subwoofer ON 230V 50/60H C B C R C B C R C B C R YY/P B /P R Y /P B /P R /P B /P R VIDEO TV VCR1 S-VIDEO SWITCHED VCR1 DSS/VCR2 100W MAX. over 80 % of the dialog from a typical motion We recommend using a sub-woofer to have maximum IN OUT bass effect. Sub-woofer bears only low frequency IN OUT OUT RL picture emanates from the center channel. MULTI TV VCR1 MONITOR DVD DSS/VCR2 MONITOR OUT OUT range so you can place it any where in the room. INPUT-1 INPUT-2 OUTPUT DVI-D It should possess similar sonic characteristics to SURROUND BACK/ MULTI SPEAKER/ Z 5 6 SPEAKER C AC IN the main speakers. Surround channel speakers DIGITAL IN DIGITAL OUT RC-5 MULTI RC FLASHERL IN SL SBL COAX. IN 12 PRE need not be identical to the front channel speakers, RS-232C HEIGHT OF THE SPEAKER UNITS 4 C OUT but they should be of high quality. 2 3 CD TAPE CDR/MDPRE LSLSBL OPT. OUT OUT The surround center speaker is useful for playback Front left and right speakers, and a center speaker MULTI C R LLRLR R R 1 SW

of Dolby Digital Surround EX or DTS-ES. One of Align the tweeters and mid-range drivers on the 12DC OUT 7.1CH RSWSR SBR TV DVD VCR1 DSS/VCR2 IN FRONT A FRONT B CENTER CENTER SURROUND the benefits of both Dolby Digital and DTS is that three front speakers at the same height, as best as SPEAKER SYSTEMS AUDIO FRONT A OR B, CENTER, SURR, SURR- 8 OHMS BACK L FRONT:6 A + B : 8 OHMS surround channels are discrete full range, while possible. OUTIN OUT IN OUT IN OUT SBR SW they were frequency limited in earlier “Pro Logic” Surround left and right speakers, and surround OUT type systems. back speaker R Bass effects are an important part of home theater. Place the surround left, right and surround back IN R SR For optimal enjoyment a subwoofer should be used speakers higher than your ears by about 70cmÐ (AUX2) as it is optimized for low frequency reproduction. If 1m. Also place the speakers at the same height, sa you have full range front speakers, however, they best as possible. may be used in place of a subwoofer with proper RIGHT LEFT CENTER setting of the switches in the menu system. FRONT

70cm CONNECTING SPEAKER WIRE 1m 2.1.

Subwoofer 1. Strip away approx. 3/8 inch (10 mm) of wire Surround Left Front Left insulation. Surround Back Left 2. Twist the bared wire ends tight, to prevent 10 mm 0° short circuits. Front Center Loosen the knob by turning it counterclockwise. 5. 4. 3. 22° 3. Surround Back ° Right 150 Insert the bare part of the wire into the hole in ° 4. 30 side of each terminal. 135° Surround Right Tighten the knob by turning it clockwise to 110° ° Front Right 5. 90 secure the wire.

Front left and right speakers Note: We recommend to set the front L and R speakers • Use magnetically-shielded speakers for front left, with 45-60 degrees from the listening position. right and the center speakers when the speakers are installed near the TV and the TV is a monitor Center speaker type. Align the front line of the center speaker with the front L/R speakers. Or place the center speaker a little backward from the line.

12 Caution: CONNECTING AUDIO COMPONENTS • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. TAPE DECK • To prevent damage to circuitry, do not let the bare CD PLAYER CD RECORDER / MD DECK DIGITAL OUT speaker wires touch OUTPUT OUT IN L L L each other and do ENGLISH R not let them touch R R any metal part of OUT IN this unit. DIGITAL DIGITAL L L INPUT OUTPUT L R L R L R • Do not touch the R R speaker terminals when the power is ANALOG AUDIO on. It may cause L R R L L R DVD DSS/VCR2 L R L R you to receive an electric shocks. R L

• Do not connect more than one speaker cable to MONITOR OUT ANTENNA COMPONENT DIGITAL AUDIO one speaker terminal. Doing so may damage this INVIDEO OUT TV DVD (COAXIAL)OFF unit. IN OUT SPEAKER C FM (75½) GND AM AC OUTLET

C B C R C B C R C B C R ON 230V 50/60H YY/P B /P R Y /P B /P R /P B /P R VIDEO TV VCR1 S-VIDEO SWITCHED Note: VCR1 DSS/VCR2 100W MAX. IN OUT IN OUT OUT RLDIGITAL AUDIO

• Be sure to connect the positive and negative cables MULTI TV VCR1 MONITOR DVD DSS/VCR2 MONITOR (OPTICAL) OUT OUT INPUT-1 INPUT-2 OUTPUT DVI-D for the speaker properly. If they are miss-connected, SURROUND BACK/ MULTI SPEAKER/ Z the signal phase will be reversed and the signal 5 6 SPEAKER C AC IN DIGITAL IN DIGITAL OUT DIGITAL OUT RC-5 MULTI RC FLASHERL IN SL SBL quality will be corrupted. COAX. IN 12 RS-232C CD TAPE CDR/MD 4 6 C

2 3 CD TAPE CDR/MDPRE LSLSBL OPT. OUT OUT MULTI C R LLRL R CONNECTING A SUBWOOFER 1

12DC OUT 7.1CH RSWSR SBR Use the PRE OUT SUBWOOFER jack to connect TV DVD VCR1 DSS/VCR2 IN FRONT A FRONT B CENTER SURROUND IN OUTIN OUT SPEAKER SYSTEMS a powered subwoofer (power amplifier built in ). AUDIO FRONT A OR B, CENTER, SURR, SURR- 8 OHMS BACK L FRONT:6 A + B : 8 OHMS If your subwoofer is a passive type (power amplifier OUTIN OUT IN OUT IN OUT SBR SW is not built in), connect a monaural power amplifier OUT R to the PRE OUT SUBWOOFER jack and connect R L R L the subwoofer to the amplifier. IN R SR

(AUX2)

The output audio signal from the TAPE OUT jack CONNECTING DIGITAL AUDIO COMPONENTSNotes: and the CD-R/MD OUT jack is the same signal which ¥ There are 6 digital inputs, 3 coaxial jacks and 3 • There is no Dolby Digital RF input jack. Please is currently selected. optical jacks, on the rear panel. You can use use an external RF demodulator Dolby Digital Caution: these jacks to input PCM, Dolby Digital and DTS decoder when connecting the Dolby Digital RF output jack of the video disc player to the digital • Do not connect this unit and other components to bitstream signals from a CD, DVD, or other input jack. mains power until all connections between digital source components. components have been completed. ¥ There is one digital output coaxial jack and one • The digital signal jacks on this unit conform to the EIA standard. If you use a cable that does not Notes: optical output jack on the rear panel. These jacks can be connected to a CD recorder-, or a conform to this standard, this unit may not • Insert all plugs and connectors securely. function properly. MD deck inputs, respectively. Incomplete connections may make noise. • Each type of audio jack works independently. • Be sure to connect the left and right channels ¥ Refer to the instructions for each component. To Signals input through the digital and analog jacks properly. setup the digital audio format of DVD player, or are output through the corresponding digital and other digital source’s connected to digital input analog jacks, respectively. Red connectors are for the R (right) channel, and jacks. white connectors are for the L (left) channel. ¥ Use fiber optical cables (optical) for DIG-1,2,3 • Be sure to connect input and output properly. input jacks. Use 75 ohms coaxial cables (for • Refer to the instructions for each component that digital audio or video) for DIG-4, 5, 6 input jacks. is connected to this unit. ¥ You can designate the input for each digital • Do not bind audio/video connection cables with input/output jacks according to your component. power cords and speaker cables this will result in See page 19. generating a hum or other noise.

13 ENGLISH CONNECTING VIDEO COMPONENTS VIDEO, S-VIDEO, COMPONENT JACKS There are 3 types of video jacks on the rear panel. VIDEO jack VIDEO PROJECTOR SATELLITE TUNER DVD PLAYER The video signal for the VIDEO jacks is the conventional composite video signal. S-VIDEO jack The video signal is separated into luminance (Y) DIGITAL AUDIO VIDEO COMPONENT S-VIDEO DVI-D DVI-D COMPONENT S-VIDEO DIGITAL AUDIO VIDEO S-VIDEO VIDEO OUT IN VIDEO IN IN OUT OUT OUT YC B /P B C R /P R OUT OUT YC B /P B C R /P R OUT OUT OUT OUT and color (C) signals for the S-VIDEO jack. The S- VIDEO signals enables high-quality color LR LR reproduction. If your video component has an S- VIDEO output, we recommend to use it. Connect the S-VIDEO output jack on your video component L R to the S-VIDEO input jack on this unit. L R Component jack Make component video connections to a TV or

DVD DSS/VCR2 monitor with component inputs to produce higher L R DVD DSS/VCR2 quality video images. Use a component video cable

MONITOR OUT MONITOR OUT or 3 video cords to connect the component video DVD ANTENNA COMPONENT MONITOR OUT out jacks on the SR7500 to the monitor. INVIDEO OUT COMPONENT TV DVD ANTENNA INVIDEO OUT IN OUT DVI-D jack (SR8500 only) FM (75½) GND AM SPEAKER C TV DVD IN OUT C B C R C B C R C B C R YY/P B /P R Y /P B /P R Y /P B /P R FM (75½) GND AM This unit has two DVI-D inputs and one DVI-D output. VIDEO TV VCR1 S-VIDEO C B C R C B C R C B C R VCR1 DSS/VCR2 YY/P B /P R Y /P B /P R /P B /P R IN OUT DIGITAL IN TV VCR1 It can send digital signals from DVDs and other IN OUT OUT RL VIDEO S-VIDEO VCR1 DSS/VCR2 IN OUT IN OUT OUT sources directly to a display. It minimizes signal MULTI TV VCR1 DVD VCR1 MONITOR DVD VCR1 DSS/VCR2 MONITOR IN OUT OUT IN OUT OUT OUT MULTI TV VCR1 degradation caused by analog conversion so that INPUT-1 INPUT-1 INPUT-2 OUTPUT DVI-D TV DSS/VCR2 MONITOR DVD DSS/VCR2 DSS/VCR2 MONITOR SR8500 SURROUND BACK/ IN OUT OUT OUT IN OUT only MULTI SPEAKER/ INPUT-1 INPUT-2 OUTPUT DVI-D high quality images can be enjoyed. Select an input 5 6 SPEAKER C DIGITAL IN DIGITAL OUT RC-5 MULTI RC FLASHERL IN SL SBL 2 source from the SETUP MAIN MENU. (See page 19.) COAX. IN 5 6 5 12 DIGITAL IN DIGITAL OUT RC-5 MULTI RC L SL SBL RS-232C COAX. 4 C IN CD TAPE CDR/MD LSLSBL RS-232C 2 3 PRE 4 C OPT. 2 3 CD TAPE CDR/MD LSLSBL DVD VCR1 MULTI OUT C PRE Notes: R L R DSS/VCR2 OPT. 1 OUT TV FLASHER IN MULTI C • Be sure to connect the left and right audio channels 1 12DC OUT 7.1CH L 12 RSWSR SBR properly. TV DVD VCR1 DSS/VCR2 IN FRONT A F 7.1CH RSWSR SBR IN OUT SPEAKER SYSTEMS AUDIO FRONT A OR B, CENTER, S - 8OH TV DVD VCR1 DSS/VCR2 IN Red connectors are for the R (right) channel, and L FRONT:6 A + B:8OH IN OUTIN OUT IN OUT IN OUT SBR SW R AUDIO L white connectors are the for L (left) channel. OUTIN OUT IN OUT IN OUT SBR SW OUT OUT

OUT 12DC OUT OUT • Be sure to connect the inputs and outputs of the R Note (SR8500 only): L R L R R L R video signals properly. IN R SR • When a device with DVI R L VIDEO IN R SR • If you connect the S-VIDEO or component signal to output that supports the S-VIDEO or component jack on this unit, it is not (AUX2) HDCP is connected to a necessary to connect the conventional video signal to (AUX2) device that does not S-VIDEO the VIDEO (composite) jack. If you use both video support HDCP, signals inputs, this unit gives priority to the S-VIDEO signal. are not output. To view images in DVI, it is • Each type of video jack works independently. L R Signals input to the VIDEO (composite) and S- L R L R necessary to connect a ANALOG AUDIO

display that supports R VIDEO jacks or component are output to the HDCP. L corresponding VIDEO (composite) and S-VIDEO or component jacks, respectively. AUDIO VIDEO VIDEO S-VIDEO DIGITAL AUDIO AUDIO AUDIO VIDEO S-VIDEO • There may be no Image OUT OUT IN IN OUT IN OUT IN OUT IN output if connected to a (COAXIAL) • This unit has the “TV-AUTO ON/OFF” function to TV or display that is not turn the TV ON or OFF automatically, by sensing LR the incoming video signal from the VIDEO jacks. LR LR compatible with the above format. DIGITAL AUDIO • You may need to setup the digital audio output (OPTICAL) • Refer to the instruction format of your DVD player, or other digital source manual of the TV or components. Refer to the instructions of the each display to be connected to component connected to the digital input jacks. VCR this unit for detailed TV • There is no Dolby Digital RF input jack. Please information regarding the use an external RF demodulator with a Dolby DVI-D terminal. Digital decoder to connect a video disc player which has a Dolby Digital RF output jack to the *HDCP: High-bandwidth Digital Content Protection digital input jack on this unit. 14 ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS

DVD DSS/VCR2

MONITOR OUT ANTENNA COMPONENT INVIDEO OUT TV DVD OFF ENGLISH IN OUT SPEAKER C FM (75½) GND AM AC OUTLET R L R L R L C B C R C B C R C B C R ON 230V 50/60H YY/P B /P R Y /P B /P R /P B /P R VIDEO TV VCR1 S-VIDEO SWITCHED VCR1 100W MAX. DVD DSS/VCR2 DSS/VCR2 IN OUT IN OUT OUT RL

MULTI TV VCR1 MONITOR DVD DSS/VCR2 MONITOR MONITOR OUT COMPONENT OUT OUT ANTENNA R L R L R L VIDEO INPUT-1 INPUT-2 OUTPUT DVI-D DVD AUDIO PLAYER SURROUND BACK/ OFF MULTI SPEAKER/ or SPEAKER C AC IN Z SPEAKER C 5 6 RC-5 RC-5 2 FM (75 Ω ) GND AM DIGITAL IN DIGITAL OUT MULTI RC FLASHERL IN SL SBL SACD MULTI CHANNEL COAX. CB CR CB CR IN OUT CB CR ON IN 12 YY/PB /PR Y /PB /PR /PB /PR TV DVD TV VCR1 VIDEO IN OUT S-VIDEO RS-232C PLAYER 4 C RL AC OUTLET CD TAPE CDR/MD LSLSBL RC OUT VCR1 DSS/VCR2 2 3 PRE IN OUT IN OUT OUT 230V 50/60H CENTER OPT. L SWITCHED OUT VCR1 OUT MONITOR MULTI TV DVD DSS/VCR2 MONITOR 100W MAX. MULTI C OUT OUT R LLRL R OPTION INPUT-1 INPUT-2DVI-D OUTPUT 1 USB IN SURROUND BACK/ R MULTI SPEAKER/ 12DC OUT 7.1CH SPEAKER C FRONT SURR.AC IN SURR. Z SUB RSWSR SBR DIGITAL IN DIGITAL OUT RC-5 MULTI RC FLASHER INL SL SBL L SL SBL C BACK WOOFER IN 5 6 TV DVD VCR1 DSS/VCR2 FRONT A FRONT B CENTER SURROUND COAX. IN 12 SPEAKER SYSTEMS C AUDIO FRONT A OR B, CENTER, SURR, SURR- 8 OHMS BACK 4 RS-232C L :6 + OUTIN OUT IN OUT IN OUT SBR SW FRONT A B : 8 OHMS PRE PRE POWER 2 3 CENTER OUT OUT L OPT. OUTCD TAPE CDR/MD LSLSBL AMPLIFER OUT 1 MULTI LSLC SBL C R LLRL R R 12DC OUT R RSWSR SBR RSWSR SBR FRONT SURR. SURR.TV DVD VCR1SUBDSS/VCR2 7.1CH Subwoofer 1 BACK WOOFER IN R SR 7.1CHIN L FRONT A FRONT B CENTER SURROUND IN SPEAKER SYSTEMS FRONT A OR B, CENTER, SURR, SURR BACK AUDIO - 8 OHMS OUTIN OUT IN OUT IN OUT SBR SW FRONT A: 6+ B : 8 OHMS OUT R SR SBR SW (AUX2) R REMOTE REMOTEMD DECK REMOTE IN R SR CONTROL CD RECORDER CONTROL CD PLAYERCONTROL RL RL RL L R L R L R

(AUX2) IN IN IN Front Center Front Left Right OUT OUT OUT Surround Surround Left Right EXTERNAL INTERNAL EXTERNAL INTERNAL EXTERNAL INTERNAL

Surround Surround Back Left Back Right q w CONNECTING MULTI CHANNEL AUDIO SOURCECONNECTING AN EXTERNAL POWER AMPLIFIERYou can control other Marantz products through Whenever external infrared sensors or similar this unit with the remote control by connecting the devices are connected to RC-5 IN of the SR7500, The 7.1CH INPUT jacks are for multichannel audio The PREOUT jacks are for connecting external REMOTE CONTROL terminals on each unit. be sure to always disable operation of the infrared source such as a SACD multichannel player, DVD power amplifiers. The signal transmitted from the remote control is sensor on the main unit by using the following audio player or external decoder. Be sure to connect each speaker to the corresponding received by the remote sensor on this unit. Then procedure. If you use these jacks, switch on the 7.1CH INPUT external power amplifier. the signal is sent to the connected device through and set the 7.1CH INPUT level by using the this terminal. Therefore you need to aim the SETUP MAIN MENU. See page 23. 1. Hold down the MULTI button and the MENU remote signal only to the unit. Also, if a Marantz button on the front panel at the same time for power amplifier (some models excluded) is five seconds. connected to one of these terminals, the power The setting “IR=ENABLE” is shown on the FL amplifier’s, power switch is synchronized with this 2. unit’s power switch. DISPLAY. 3. Press the CURSOR buttons ( , ) to change Set the REMOTE CONTROL SWITCH on the units, this to “IR=DISABLE”. other than the main unit to EXT.(EXTERNAL) for 4. Press the ENTER button. Once this setting is this feature. made, the infrared sensor on the main unit is disabled. Note: • Be sure to set to “IR=ENABLE” when external infrared sensors or similar devices are not connected. Otherwise, the main unit will be unable to receive remote control commands. 5. To restore the original setting, perform steps 1 to 4 to set to “IR=ENABLE”. 15 ENGLISH CONNECTING THE ANTENNA TERMINALS CONNECTING THE SUPPLIED ANTENNAS Connecting the supplied FM antenna FM ANTENNA AM LOOP AM EXTERNAL The supplied FM antenna is for indoor use only. FM EXTERNAL ANTENNA During use, extend the antenna and move it in ANTENNA ANTENNA various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion. If you experience poor reception quality, an DVD DSS/VCR2 outdoor antenna may improve the quality.

MONITOR OUT Connecting the supplied AM loop antenna ANTENNA COMPONENT INVIDEO OUT TV DVD OFF The supplied AM loop antenna is for indoor use IN OUT SPEAKER C FM (75½) GND AM AC OUTLET only. C B C R C B C R C B C R ON 230V 50/60H YY/P B /P R Y /P B /P R /P B /P R VIDEO TV VCR1 S-VIDEO SWITCHED Set it in the direction and position it to where you VCR1 DSS/VCR2 100W MAX. IN OUT IN OUT OUT RL receive the clearest sound. Put it as far away as MULTI TV VCR1 MONITOR DVD DSS/VCR2 MONITOR OUT OUT possible from the unit, televisions, speaker cables, INPUT-1 INPUT-2 OUTPUT DVI-D SURROUND BACK/ MULTI SPEAKER/ and power cords. Z 5 6 SPEAKER C AC IN DIGITAL IN DIGITAL OUT RC-5 MULTI RC FLASHERL IN SL SBL If you experience poor reception quality, an outdoor COAX. IN 12 RS-232C antenna may improve the quality. 4 C

2 3 CD TAPE CDR/MDPRE LSLSBL OPT. OUT 1. Press and hold down the lever of the AM antenna OUT MULTI C R LLRL R 1 terminal.

12DC OUT 7.1CH RSWSR SBR 2. Insert the bare wire into the antenna terminal. TV DVD VCR1 DSS/VCR2 IN FRONT A FRONT B CENTER SURROUND SPEAKER SYSTEMS AUDIO FRONT A OR B, CENTER, SURR, SURR- 8 OHMS BACK 3. Release the lever. :6 + L OUTIN OUT IN OUT IN OUT SBR SW FRONT A B : 8 OHMS

OUT

R CONNECTING AN FM OUTDOOR ANTENNA

IN R SR Notes: ASSEMBLING THE AM LOOP ANTENNA 4. Place the antenna on stable surface. • Keep the antenna away from noise sources (neon (AUX2) 1. Release the vinyl tie and take out the connection signs, busy roads, etc.). line. • Do not put the antenna close to power lines. Keep it well away from power lines, transformers, etc. • To avoid the risk of lightning and electrical shock, grounding is necessary.

CONNECTING AN AM OUTDOOR ANTENNA An outdoor antenna will be more effective if it is 2. Bend the base part in the reverse direction. stretched horizontally above a window or outside. Notes: • Do not remove the AM loop antenna. • To avoid the risk of lightning and electrical shock, grounding is necessary.

3. Insert the hook at the bottom of the loop part into the slot at the base part.

16 CONNECTING FOR THE MULTI ROOM CONNECTING FOR SPEAKER C USE Bi-wire Connection A bi-wire connection is possible with speakers that have two sets of inputs (for treble and bass). This allows you to drive the treble and bass units with separate channel amps, which enables better ENGLISH (Multi room speaker) sound quality. Connect the speakers as shown in RIGHT LEFT the figure. Set the SPEAKER C selector switch on SPEAKER SPEAKER the rear panel to ON. Notes: • If incorrectly connected, a protective circuit in the receiver will trip and set the receiver to standby. (The STANDBY indicator will flash.) In such case, recheck the connections between the

DVD DSS/VCR2 speakers and the receiver. • Turn power to the receiver off before changing the MONITOR OUT setting of the SPEAKER C selector switch. ANTENNA COMPONENT INVIDEO OUT TV DVD OFF IN OUT SPEAKER C OFF FM (75½) GND AM AC OUTLET

C B C R C B C R C B C R ON 230V 50/60H YY/P B /P R Y /P B /P R /P B /P R VIDEO TV VCR1 S-VIDEO SWITCHED SPEAKER C VCR1 DSS/VCR2 100W MAX. IN OUT IN OUT OUT RL DSS/VCR2 ON MULTI TV VCR1 MONITOR DVD DSS/VCR2 MONITOR OUT OUT INPUT-1 INPUT-2 OUTPUT DVI-D SURROUND BACK/ MULTI SPEAKER/ MONITOR OUT Z 5 6 SPEAKER C AC IN DIGITAL IN DIGITAL OUT RC-5 RC-5 MULTI RC FLASHERL IN SL SBL COMPONENT COAX. VIDEO IN 12 OFF

4 RS-232C IN OUT SPEAKER C C AC OUTLET

CD TAPE CDR/MD LSLSBL C R C B C R C B C R ON 230V 50/60H 2 3 PRE /P R Y /P B /P R Y /P B /P R VCR1 SWITCHED OPT. OUT S-VIDEO 100W MAX. MULTI OUT C R LLRL R MULTIROOM RL 1

TV DVD VCR1 DSS/VCR2 MONITOR OUT 12DC OUT 7.1CH IN OUT OUT RSWSR SBR INPUT-2 OUTPUT DVI-D TV DVD VCR1 DSS/VCR2 IN FRONT A FRONT B CENTER SURROUND SURROUND BACK/ SPEAKER SYSTEMS MULTI SPEAKER/ SPEAKER C AC IN Z AUDIO FRONT A OR B, CENTER, SURR, SURR- 8 OHMS BACK MULTIROOM MULTIROOM FLASHER IN L FRONT:6 A + B : 8 OHMS OUTIN OUT IN OUT IN OUT SBR SW LEFT RIGHT 12 MULTI RC L SL SBL C OUT SPEAKER SPEAKER IN OUT R MULTI C R R LLL RL R L R PRE IN R SR 12DC OUT OUT FRONT A FRONT B CENTER SURROUND SPEAKER SYSTEMS FRONT A OR B, CENTER, SURR, SURR BACK RSWSR SBR - 8 OHMS (AUX2) :6 + E CDR/MD LSLSBL FRONT A B : 8 OHMS

OUT R L 7.1CH

IN

OUT IN OUT R SR SBR SW L (AUX2) R RC IN FRONT MAIN AMP (For MULTIROOM)

IR RECEIVER

RC OUT VIDEO Note: IN • You can use surround back speaker terminals as multi room speaker terminals or speaker C terminal when you use no surround back speaker. MONITOR

17

18 ENGLISH

Note: Note:

Note: buttons on the remote control or front panel. by using the cursor ( system, which makes various operations possible The SR7500 incorporates an on-screen menu must be performed. After all components are connected, initial setup

SETUP 4. 3. 2. 1. SYSTEM ON SCREEN DISPLAY MENU Settings are entered with the ENTER button on • If you desire to adjust any sub-menu, need • • as if it were the ENTER button. When using the remote control, use OK button the unit or OK button on remote controller. set it to UNLOCKED. (see page 14) component video input of your TV or projector. on the rear panel to composite, S-Video, have made a connection from the Monitor Out jack To view the on-screen displays, make certain you EXIT press the If you desire to exit from this menu system, condition of setup to each sub-menu with the selected sub-menu. You can lock the to enter. The display will change to the cursor buttons, and press the Select a desired sub-menu with the There are 8 items in the SETUP MAIN MENU. the OSD menu system. or set to display the “SETUP MAIN MENU” of Press the setup menus from the receiver itself.) ( Press the This step is not needed when operating the or and press the

or cursor buttons. MENU EXIT AMP button, or move the cursor to button of the remote control. button on the remote control , ENTER , , button. ) and ENTER ENTER

button or DVI1 and DVI2 : only SR8500 AIN I MA LEVELLFE VIDEO CONVERT NFO I OSD TV-AUTO STANDBY MODE N I MA :D-AT -AT :D2 AUX1 DSS :ANA -AT :D5 VCR1 :D4-AT DVD TV -AT :D1 R CD- : :ANA TAPE CD AIN I MA AIN I MA ETRW DTH WI CENTER DIMENSION R ALOG I D SRS PANORAMA PARAMETER TRUBASS 5CS 4PL PREFERENCE 3 1INPUTSET II II 6-AT D6 PARAMETER U P C I MUS :0 :0 :0 :4 :OFF : ARAMETER VI2:DSS 2 I DV :DVD 1 I DV UP : :0dB:ENABLE:ENABLE:DISABLE DEFAULT SR8500 only ECONOMY XIT I EX XIT I EX XIT I EX XIT I EX AIN I MA CROPHONE I M ET S SETUPSPEAKER AIN I MA VIDEO:DVD ----MAIN VARI : LEVEL: -90dB ROOM : VOL I T MUL TIMER SLEEP O I AUD VIDEO AINRETURN N I MA ZE SI SPEAKERS DISTA SPEAKERS LEVELSPEAKERS CHECKSPEAKERS - SPEAKER SET2-1 See MRAC on page 21. 6MULTI ROOM UOSETUP AUTO START OFF CAN SK : MSPKR O : VOL EE : LEVEL U O:DVD I AUD ETE T I EX NEXT ETE T I EX NEXT STATUS---- C : NCE : CEL :OFF:DVD:DVD UP AUTO : : : 4.PL 3.PREFERENCE2.SPEAKER1.INPUT SETUP SETUP 8.DC-TRIG SETUP7.7.1CH. INPUT6.MULTI ROOM5.CS ✽✽✽ ✽✽✽ ✽✽✽✽ ✽✽ ✽✽ ✽✽ ✽✽ XIT I EX EU AINMEN N I MA SETUP II II U C I MUS :UNLOCKED:UNLOCKED:UNLOCKED:UNLOCKED:UNLOCKED:UNLOCKED:UNLOCKED: UNLOCKED U AIN I MA SETUPSPEAKER AINRETURN N I MA W SUB L SURR. L SURR.B R SURR.B SURR.R R FRONT CENTER L FRONT MODETEST RETURN N I MA R SURR.B L SURR.B W SUB SURR.R L SURR. CENTER R FRONT L FRONT DISTANCE UNIT RETURN N I MA X MI BASS LPF/HPF ZE I S SURR.BACK SURR.BACK /R L SURROUND CENTER L/R FRONT SUBWOOFER - SPEAKER SET2-1 - SPEAKERS2-4 SPEAKERS2-3 SPEAKERS2-2 XIT I EX or ETE T I EX NEXT ETE T I EX NEXT :9.0m:3.2m:0.1m:6.4m:8.7m:5.4m:4.5m:4.5m:m DISTANCE :-15dB:+6dB:-10dB:-10dB:+6dB:+10dB:0dB:+10dB:MANUALLEVEL SIZE ETE T I EX NEXT : UP :BOTH:100HZ:SMALL:1CH:SMALL:SMALL:SMALL:YES MANUAL E T I EX AINRETURN N I MA W SUB L SURR. L SURR.B R SURR.B SURR.R R FRONT CENTER L FRONT VIDEO-IN AINRETURN N I MA OFF : OFF AUX2 : AUX1 OFF OFF TUNER: : R OFF CD- OFF : : TAPE CD : 2 IG- TR DC N I MA OFF : OFF AUX2 : AUX1 OFF OFF TUNER: : R OFF CD- OFF : : TAPE CD : 1 IG- TR DC - CTRIGGER DC 8-2 TRIGGER DC 8-1 77.1CH. PTLEVEL NPUT I DISABLE DISABLE S OFF : DSS OFF : DVD OFF : DSS OFF : DVD C1:OFF : VCR1 OFF : VCR1 V:OFF : TV OFF : TV .C:OFF7.1CH: OFF7.1CH: ETE T I EX NEXT :0dB:0dB:0dB:0dB:0dB:0dB:0dB: :LAST SETUP SETUP XIT I EX XIT I EX 0 dB 1 INPUT SETUP 2 SPEAKER SETUP 1. Select 2. SPEAKER SETUP on the SETUP SURR. BACK MAIN MENU, then select MANUAL for 2-1 NONE: (ASSIGNABLE DIGITAL INPUT) After you have installed the SR7500, connected all SPEAKER SETUP. Select if no surround back left and right 6 digital inputs can be assigned to a desired the components, and determined the speaker 2. To select the each speaker, press the or speakers are connected. layout, it is now time to perform the settings in the 2CH: source. cursor buttons.

With the SR8500, DVI-D input can be assigned to Speaker Setup menu for the optimum sound Select if the surround back left and right ENGLISH To select the setting of each speaker size, a preferred source. acoustics for your environment and speaker 3. speakers are connected. Use this menu to select the digital input jack to be layout. press the or cursor buttons. 1CH: assigned to the input source. Before you perform the following settings, it is 4. After you complete this portion of the set up, Select if the one surround back speaker is important that you first determine the following move the cursor to “NEXT” with the or connected. 1. Select “INPUT SETUP” in SETUP MAIN characteristics: cursor buttons and then press the ENTER In this case, the audio signal is emitted form the Surround L output terminal. MENU with or cursor button, and press button to go to the next page. the ENTER button. 2-1 SPEAKER SETUP Notes: Speakers are set up by selecting either MANUAL THX SPEAKER SYSTEM • If “NONE” is selected for the Surround L/R 1INPUTSETUP or AUTO using the and cursor buttons. For If you use full THX speaker systems which are setting, then this setting is fixed to “NONE.” CD : D6 -AT DV I 1 : DVD operation when AUTO has been selected, see approved by THX Ltd. the front, the center and TAPE :ANA DVI 2 :DSS • You can use surround back speaker terminals as MRAC on page 21. surround speaker size should be ”Small” and the CD - R : D1 - AT multi room speaker terminals when you use no subwoofer should be “Yes”. surround back speaker. (See page 17) SR8500 only 2 - 1 SPEAKER SETUP You need to set number of surround back speaker TV :D4-AT only. DVD : D5 - AT SPEAKERS SETUP : MANUAL SURR. BACK SIZE VCR1 : ANA LARGE: DSS : D2 - AT SUBWOOFER Select if the surround back speaker is large. AUX1 : D - AT YES: SMALL: MA I N E X I T Select when a subwoofer is connected. Select if the surround back speaker is small. NONE: Note: 2. To select the input source, press the or Select when a subwoofer is not connected. cursor buttons. • If “NONE” is selected for the Surround L/R setting, then this setting is not available. 3. To select the digital input jack, press the or MA I N NEX T EX I T FRONT L/R cursor buttons. LARGE: Select “Dx-AT” for input sources, for automatic Select if the front speakers are large. LPF/HPF detection of the digital input signal condition. 2-2 SPEAKERS SIZE SMALL: When you use a subwoofer, you can select the If there is not a digital signal present, but there When setting the speaker size in the SPEAKER Select if the front speakers are small. cutoff frequency for the small speakers used. Select one of the crossover frequency levels is an analog signal present, the analog signal SIZE sub-menu, use the guidelines given below. • If “NONE” is selected for the Subwoofer setting, according to the size of the small speaker will be played. LARGE: then this setting is fixed to “LARGE.” The complete frequency range for the channel connected. Select “Dig x”, when only a digital signal will be you are setting will be output from the speaker. 80Hz: used. Select “ANA” for input sources for which SMALL: CENTER Select this when the bass speaker is about 12 no digital input jacks are used. Frequencies of the channel you are setting NONE: cm (4 3/4 inches). 4. To select the video source, select “DVI1” or lower than approx. 100 Hz will be output from Select if no center speaker is connected. 100Hz: LARGE: “DVI2” by pressing the or cursor buttons, the subwoofer. Select this when the bass speaker is about 10 If the Subwoofer is set to “NONE” and the front Select if the center speaker is large. cm (3 15/16 inches). and press the or cursor buttons to select SMALL: the video source to be assigned .(SR8500 speakers are set to “LARGE,” then the sound 120Hz: will be output from both the left and right Select if the center speaker is small. Select this when the bass speaker is about 8 cm only) speakers. (3 3/16 inches). 5. After you complete this portion of the set up, SURROUND L/R Notes: move the cursor to MAIN with the or 2-2 SPEAKERS SIZE NONE: • Use the above comments as reference when cursor buttons and press the ENTER button. Select if no surround left and right speakers are SUBWOOFER : YES adjusting. Notes: connected. FRONT L /R : SMALL LARGE: • If Pure-Direct mode, 7.1CH Input is in use, this • The TUNER and AUX2 are fixed to the analog CENTER : SMALL Select if the surround left and right speakers are function does not take effect. input, and cannot be selected for any digital input. SURROUND L / R : SMALL large. • When a DTS-LD or DTS-CD is playing, this setup SURR . BACK : 1CH SMALL: is not available. This is to avoid noise being SURR . BACK S I ZE : SMALL Select if the surround left and right speakers are generated from the analog input. LPF/HPF : 100 HZ small. • If “Dx-AT” is selected and a DVD, compact disc BASS M I X : BOTH or LD is fast-forwarded during playback, decoded MA I N RETURN NEXT EX I T signals may produce a skipping sound. In such cases, change the setting to DIGITAL. 19

20 ENGLISH

Note: Note: and today create the proper sound space that SR7500 This is important for the timing of acoustics to used seating position in the room. Begin by determining the ideal or most commonly these distances. delay time is automatically calculated according to speaker Use this parameter to specify the distance of each 2-3 SPEAKERS DISTANCE BASS MIX ¥ ¥ ¥ “ The bass mix setting is only valid when through the main L&R ONLY. By selecting actual volume of the low frequency range. interference may result in a decrease of the depending on the size and shape of room, expand more uniformly through the room, but In this playback mode, the low frequency range the subwoofer. will be played through the main L&R, as well When PCM or analog stereo sources. This setting has effect only during playback of is set for the subwoofer during stereo playback . LARGE • • further information about this). recommends the WWW.CEDIA.ORG website for sophisticated custom installations. Marantz professionals familiar with even the most installation for you. They are trained unsure, have your Marantz dealer perform the proper home theater configuration. If you are DVD and LD here. (There are several useful books and special Speaker Configuration sub-menu will not appear For speakers that you have selected DTS, will be played through the subwoofer. LFE signals during playback of Dolby Digital or UR.BR:9.0m 0 . m 9 m 2 . 1 . 3 0 m T I 4 EX : . m 6 7 : . : 8 NEXT m : 4 RETURN . 5 : m N I R MA 5 . 4 B m . L : SURR 5 . 4 B . SURR : W SUB : R . SURR L . SURR m CENTER : R FRONT T I L UN FRONT STANCE I D ’ PAESDISTANCE I D SPEAKERS 3 - 2 s position from the listening position. The “ BOTH ’ s sound systems are able to produce. ” is set for the front speakers and “ MIX ” is selected, the low frequencies ’ s available to guide you through ” , the low frequencies will play “ NONE “ YES ” the

”

Notes: SURR. B R: SURR. B L: SUB W: SURR. R: SURR. L: CENTER: FRONT R: FRONT L: 4. 3. 2. 1. speaker to your normal listening position. Set the distance from surround back right speaker to your normal listening position. Set the distance from surround back left normal listening position. Set the distance from subwoofer to your to your normal listening position. Set the distance from surround right speaker to your normal listening position. Set the distance from surround left speaker normal listening position. Set the distance from center speaker to your your normal listening position. Set the distance from front right speaker to your normal listening position. Set the distance from front left speaker to • • • • The setting of Surr.Back appears if it is set for one speakers in the Speaker Size menu. appears if you set for it to, two surround back The setting for Surr.Back L and R the Speaker Size menu will not appear. For the speakers that you have selected ft: 0.3 - 30.0 ft in steps m: 0.1 - 9.0 m in .01 steps feet (ft) as follows. Set the distance to each speaker in meters (m) or surround back speaker in the Speaker Size menu. button to go the next page. cursor buttons and then press the move the cursor to After you complete this portion of the set up, the To set the distance for each speaker , press cursor buttons. To select each speaker, press the DISTANCE UNIT. Select either m (meters) or ft (feet) for or cursor buttons. “ NEXT ” with the “

ENTER NONE or or

”

each speaker as listed below. If you select same level for all the speakers. level of the noise from speaker so that it is Using the for each channel. Subwoofer → → through in a circular pattern which is Left If you select TEST MODE: Note: Pressure Level) meter, when available. level. We recommend using a SPL (Sound that they are all heard by the listener at same Here you will set the volume for each speaker so 2-4 SPEAKERS LEVEL 2. 1. Surround Back Left buttons. Selects the mode of test tone with Right • channel input mode and Pure-Direct mode. The speaker level settings are not available in 7.1 left speaker. speaker so that it is the same level as front volume level of the noise from center Using the the center speaker. The SR7500 will now emit the pink noise from +10 dB in 1 intervals.) can be adjusted to any level between -15 and except the subwoofer setting. The between -10 and +10 dB in 1 intervals (Note that this can be adjusted to any level press the Remember the level of this noise and then emit a pink noise from the front left speaker. pressing the When you move the cursor to FRONT L by U 5dB T I EX dB 15 - 6 + : dB 0 1 : dB - dB 0 6 1 + - : RETURN dB : 0 : dB N I MA +10 W SUB dB : L . L +10 : SURR B . R SURR : MANUAL B . SURR R . : SURR R FRONT CENTER L FRONT MODE EST T PAESLEVEL SPEAKERS 4 - 2 → “ Surround Right or MANUAL → “ “ MANUAL AUTO Left cursor buttons, adjust the volume

cursor button. and cursor button, the SR7500 will ” →

, the test tone will be cycled ” or .. increments of 3 seconds ” , adjust the output level of cursor buttons, adjust the “ → AUTO → Surround Back Right Surround Left ” for generating or → cursor Center

→

Notes: MAIN MENU. and then press the the After you complete this portion of the set up, press

4. 3. • • • • ENTER sub menu. (See page 23). sources, you will need to use the 7.1CH-INPUT To adjust the speaker levels for 7.1-channel input speakers in the Speaker Size menu. appears if you have set it for two surround back The setting of Surr.Back L and R Speaker Size menu will not appear. Speakers that you selected one surround back speaker in the Speaker Size menu. The setting of Surr.Back appears if you have set it for speaker. will now emit the pink noise from front right adjusted to the same volume level. and other speakers until all are Repeat steps Press the button, the cursor will move to

cursor button again. The SR7500 2 ENTER and 3 above for the front right button to go SETUP “ NONE ” for in the “ MAIN ” MRAC (Marantz Room Acoustic Calibration) Measurement • About surround back speakers : When the surround back speaker is set to NONE Speaker settings that were difficult by MANUAL setup can now be made by automatically measuring During measurement, a test tone is output from the in the SPEAKER SETUP, it is skipped in the speaker characteristics using the including microphone. speakers, which is then measured and analyzed though the microphone. The measurement flow AUTO setup. To use the surround back speaker, and items are as follows. set it to YES by MANUAL setup before using the 2-1 SPEAKER SETUP AUTO SETUP MRAC feature.

Microphone connection check: MIC CHECK ENGLISH SPEAKER SETUP : AUTO START CANCEL Ambient noise measurement: AMBIENT NOISE • The MRAC feature is available except in the MIC SETUP ERROR Speaker connected/not connected check: following modes. SET M I CROPHONE NG SPEAKERS CHECK : ✽✽ SPEAKER CHECK - 7.1 CH INPUT SPEAKERS LEVEL : ✽✽ Speaker output level check: SPEAKER LEVEL - PURE-DIRECT SPEAKERS D I STANCE : ✽✽ SPEAKERS S I ZE : ✽✽ Distance from speaker (delay time) check: SPEAKER DISTANCE 3. Either press the MRAC button on the front panel MA I N NEXT EX I T MA I N RETURN NEXT EX I T Speaker characteristics check: SPEAKER SIZE of the unit or select “2. SPEAKER SETUP” on the SETUP MAIN MENU, then select AUTO for AUTO SETUP How to Operate “2-1 SPEAKER SETUP”. Move the cursor to START CANCEL Settings are displayed on the monitor during setup, “NEXT” with the or cursor buttons and then therefore turn the monitor on. press the ENTER button. SPEAKERS CHECK : ✽✽ SPEAKERS LEVEL : ✽✽ 1. Connect the included microphone to the 2-1 SPEAKER SETUP SPEAKERS D I STANCE : ✽✽ MRAC jack of the unit. SPEAKERS S I ZE : ✽✽

AV SURROUND RECEIVER SR7500 SPEAKERS SETUP : AUTO

MA I N RETURN NEXT EX I T INPUT SELECTOR VOLUME

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT DIGITAL L C R

AAC PCM LFE SL S SR DOWN UP SET MICROPHONE AUTO SETUP AUTO SETUP

STANDBY ENTER

AUX 1 INPUT START CANCEL START CANCEL POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO LAUDIO R AMB I ENT NO ISE CHK AMB I NO I SE ERROR NG SPEAKERS CHECK : ✽✽ SPEAKERS CHECK : ✽✽ SPEAKERS LEVEL : ✽✽ SPEAKERS LEVEL : ✽✽ SPEAKERS D I STANCE : ✽✽ SPEAKERS D I STANCE : ✽✽ MA I N NE X T E X I T SPEAKERS S I ZE : ✽✽ SPEAKERS S I ZE : ✽✽ 4. Select START on the AUTO SETUP display MA I N RE TURN NEXT EX I T MA I N RETURN NEXT EX I T 2. Set the microphone at ear height as in the and press the ENTER button to start measurements. AUTO SETUP actual listening position. Use a stand or tripod to position the microphone. START CANCEL AUTO SETUP AMB I ENT NO ISE OK START CANCEL SPEAKERS CHECK : ✽✽ SPEAKERS LEVEL : ✽✽ SPEAKERS D I STANCE : ✽✽ ✽✽ SPEAKERS S I ZE : SPEAKERS CHECK : ✽✽ MA I N RE TURN NEXT EX I T SPEAKERS LEVEL : ✽✽ SPEAKERS D I STANCE : ✽✽ AUTO SETUP AUTO SETUP SPEAKERS SI ZE : ✽✽

START CANCEL START CANCEL NOW ANALYZING SPEAKER SETERROR MA I N RETURN NEXT EX I T NG SPEAKERS CHECK : ✽✽ SPEAKERS CHECK : ✽✽ 5. For measurement items, see “Measurement”. SPEAKERS LEVEL : ✽✽ SPEAKERS LEVEL : ✽✽ 6. When measurements are completed, SPEAKERS D I STANCE : ✽✽ SPEAKERS D I STANCE : ✽✽ Notes: SPEAKERS S I ZE : ✽✽ SPEAKERS S I ZE : ✽✽ “FINISHED” appears on the monitor. • Remove any obstructions between the speakers 7. Once finished, disconnect the microphone MA I N RETURN NEXT EX I T MA I N RETURN NEXT EX I T and the microphone. from the unit. • Keep the room quiet during measurement. AUTO SETUP 8. Measurement results can be seen by • The test tone emitted during measurement is loud. selecting “NEXT” and press the ENTER START CANCEL Take considerations for neighboring homes and F I N I SHED children. button or selecting “2. SPEAKER SETUP” on the SETUP MAIN MENU. Then select SPEAKERS CHECK :OK • Step away from the listening position during SPEAKERS LEVEL :OK measurement and operate the unit with the remote MANUAL for “2-1 SPEAKER SETUP”. SPEAKERS D I STANCE : OK SPEAKERS S I ZE :OK controller from outside the speaker path.

MA I N RETURN NEXT EX I T 21

SR7500N DFU_01_ENG 2_3 Page 21 04.10.13, 5:14 PM Adobe PageMaker 6.5J/PPC ENGLISH Notes: 3 PREFERENCE 4 PL II (PRO LOGIC II) 5 CS II (CIRCLE SURROUND II) • The measured speaker distance may differ from MUSIC PARAMETER PARAMETER the actual distance from speakers. Nevertheless, 3 PREFERENCE the measured value is suitable for the speakers. Pro Logic II-Music mode creates a rich and 5CSII PARAMETER • To make changes to individual speakers, select 2. STANDBY MODE : ECONOMY enveloping surround ambience from stereo sources such as CDs. SPEAKER SETUP on the SETUP MAIN MENU, TV-AUTO : DISABLE TRUBASS : 0 In this mode, SR7500 includes three controls to then select MANUAL for 2-1 SPEAKER SETUP. OSD I NFO : ENABLE SRS D I ALOG : 0 • The included microphone is designed specifically VIDEO CONVERT : ENABLE fine-tune the soundfield as follows. for this receiver. Other microphones do not LFE LEVEL : 0 dB 4PL II MUS I C PARAME TER guarantee suitable measurement results. Use the included microphone to conduct measurements. • During measurement, press the ENTER or EXIT PARAMETER : DEFAULT button to cancel measurement. MA I N E X I T • In some rooms, an error may occur during auto 1. Select “PREFERENCE” in the SETUP MAIN PANORAMA : OFF MA I N E X I T DIMENSION : 4 speaker setup or it may not be possible to set MENU with the or cursor buttons, and Speaker distance correctly because of room CENTER WI DTH : 0 1. Select “CS II” in the SETUP MAIN MENU with acoustics. In such case, set the speaker distance by press the ENTER button. the or cursor buttons, and press the MANUAL setup. 2. To select a desired content, press the or ENTER button. cursor buttons. MA I N E X I T 2. To Select desired contents as below, press Error Indications During Measurement Select “PL II MUSIC” in the SETUP MAIN MENU the or cursor buttons. STANDBY MODE: If trouble occurs during measurement, an error with the or cursor buttons, and press the TRUBASS: When this function is set to “ECONOMY”, you message is displayed on the monitor screen and ENTER button. Set the TRUBASS level between 0 and 6 level in FL display. Those errors and their remedies are can reduce the power consumption when the 1 level interval with the or cursor buttons. unit is in the standby mode. described below. The message appearing on the PARAMETER: TRUBASS produced by the speakers are an FL display is given in ( ). Note: Select “DEFAULT” or “CUSTOM” with the or octave below the actual physical capabilities of • TV-AUTO and RS-232C are disabled in the cursor buttons. the speakers adding exciting, deeper bass MIC SETUP ERROR (MIC SET ERROR) “ECONOMY” setting. If you select “CUSTOM”, you can adjust three effects. SRS DIALOG: The microphone (MC-10) is not properly parameters as listed below. TV AUTO: Set the SRS DIALOG level between 0 and 6 in 1 connected. Select the TV AUTO ON/OFF function to enable PANORAMA: → Select the Panorama mode On or Off with the level intervals with the or cursor buttons. Check the microphone connection. or disable with the or cursor buttons. (refer This can be popped out of the surround audio to page 29) or cursor buttons. AMBI NOISE ERROR (AMBI NOISE ER) effects, allowing the listener to easily discern what OSD Info: Panorama wraps the sound of the front left and right speakers around you, for an exciting perspective. the actors say. Measurement cannot be done correctly Select the OSD information function to enable or If “NONE” was selected for the Center speaker because of excessive ambient noise. disable with the or cursor buttons. DIMENSION: Set the Dimension level between 0 and 6 level in setting, in the Speaker size set up menu, then this → Either temporarily turn off power to noisy If you select “ENABLE”, the SR7500 will display 1 level intervals with the or cursor buttons. setting will not appear. devices such as air conditioning or move the status of the feature (Volume up/down, input Adjust the soundfield either towards the front or them out of the room. select, etc..) on the TV monitor. But if you do not After you complete this portion of the set up, move → desire this information, select “DISABLE ”. towards the rear. Retry measurement when the room is This can be useful to help achieve a more cursor to “MAIN” with the or cursor buttons and quiet. VIDEO CONVERT: press the ENTER button. Select the VIDEO CONVERT function to enable suitable balance from all the speakers with SPEAKER SET ERROR (SPK SET ERROR) or disable with the or cursor buttons. (Video certain recordings. cable connection: Refer to page 24) CENTER WIDTH: The speakers are not properly connected. Set the Center width level between 0 and 7 in 1 → Recheck speaker layout and level intervals with the or cursor buttons. connections. LFE LEVEL: Select the output level of the LFE signal included Center Width allows you to gradually spread the in the Dolby Digital signal or the DTS signal. center channel sound into the front left and right Select 0 dB, -10 dB or OFF with the or speakers. cursor buttons. At its widest setting, all the sound from the center is mixed into the left and right. After you complete this portion of the set up, move This control may help achieve a more spacious the cursor to “MAIN” with the or cursor buttons sound or a better blend for the front image. and press the ENTER button. If “NONE” was selected for the Center speaker setting, in the Speaker size set up menu, then this setting will not appear.

After you complete this portion of the set up, move cursor to “MAIN” with the or cursor buttons and press the ENTER button. 22

SR7500N DFU_01_ENG 2_3 Page 22 04.10.13, 5:14 PM Adobe PageMaker 6.5J/PPC VOL (VOLUME SETUP): 6 MULTI ROOM Select whether the Multi-speaker output level is 7 7.1 CH INPUT LEVEL 8 DC TRIGGER SETUP SR7500 has features in MULTI ROOM SYSTEM variable or fixed with or cursor buttons. This sub-menu is to adjust the speaker levels for This unit has 2 DC trigger control jacks, these are such as source selector, sleep timer, Multi Room Note: 7.1-channel input sources. selectable to link with input functions for the main Speaker output and remote control. Here you will adjust the volume for each channel so room or multi room. • This setting can be changed when the Surr Back is

You can set these feature in this sub-menu. that they are all heard by the listener at the same Each trigger can be set up separately. ENGLISH set “NONE” in 2-1 SPEAKER SIZE menu. level. 6MULTIROOM When this setting is unavailable, “✽✽✽” is VIDEO : DVD displayed 1. Select “DC-TRIG SETUP” in the SETUP 77.1CHINPUTLEVEL AUD I O : DVD MAIN MENU with or cursor button, and LEVEL (VOLUME LEVEL): VIDEO IN : LAST SLEEP TIMER : OFF press the ENTER button. Adjust the Multi-speaker output level with or FRONT L : 0 dB cursor button. CENTER : 0 dB MU L T I : OFF MSPKR : ✽✽✽ 8-1 DC-TRIGGER SETUP Note: FRONT R : 0 dB VOL : VAR I VOL : ✽✽✽ DC TR I G - 1 : D I SABLE SURR . R : 0 dB LEVEL : - 90dB LEVEL : ✽✽✽ • This setting can be changed when the Surr Back is SURR . B R : 0 dB - ---MAIN-ROOMSTATUS---- set “NONE” in 2-1 SPEAKER SIZE menu. CD : ✽✽✽ TV : ✽✽✽ SURR . B L : 0 dB V I DEO : DVD AUD I O : DVD When this setting is unavailable, “✽✽✽” is TAPE : ✽✽✽ DVD : ✽✽✽ SURR . L : 0 dB MA I N E X I T displayed CD - R : ✽✽✽ VCR1 : ✽✽✽ MAIN ROOM STATUS: SUB W : 0 dB TUNER : ✽✽✽ DSS : ✽✽✽ 1. Select “MULTI ROOM” in the SETUP MAIN Selected input source in the main room will be MA I N E X I T AUX1 : ✽✽✽ 7.1CH: ✽✽✽ MENU with or cursor button, and press displayed. AUX2 : ✽✽✽ the ENTER button. 1. Select “7.1CH INPUT” in the SETUP MAIN Note: 2. To Select desired contents, press or MENU with the or cursor buttons, and MA I N E X I T • If “VOLUME” is set to “FIXED”, the multi-room cursor button press the ENTER button. output level cannot be adjusted from the second 2. To select “VIDEO IN”, press or cursor 2. You can select MAIN ROOM, MULTI ROOM, VIDEO: zone. Select the video source of the Multi-room output button. REMOTE or DISABLE by pressing or with or cursor buttons. After you complete this portion of the set up, move 3. Using the or cursor buttons, select the cursor buttons. AUDIO: the cursor to “MAIN” with or cursor buttons and video input source which is emitted from Note: Select the audio source of the Multi-room output press ENTER button. Monitor out in the 7.1 CH INPUT function. with or cursor buttons. • REMOTE is available for the external control. The input source is switched by pressing the SLEEP TIMER: The RC8500SR cannot operate this function. or cursor buttons as follows; SLEEP timer function is available during the To select desired input source , press or ↔ ↔ ↔ ↔ ↔ 3. multiroom is active, set the time with or LAST TV DVD VCR1 DSS cursor button. AUX1 ↔ V-OFF ↔ LAST ↔ cursor buttons. 4. To set ON or OFF, press or cursor button. MULTI (MULTI ROOM): Notes: To switch on the Multi-room output ON or OFF, 5. After you complete this portion of the set up, press or cursor button. • When select LAST, the source is set previous move the cursor to “MAIN” with the or source before 7.1 CH INPUT function VOL (VOLUME SETUP): is activated. cursor buttons and press the ENTER button. Select whether the Multi-room output level is • When select V-OFF, no signal is emitted from variable or fixed with a or cursor buttons. monitor out terminal. LEVEL (VOLUME LEVEL): 4. To Select desired channel , press the or Adjust the Multi-room output level with or cursor buttons. cursor buttons. 5. Using the or cursor buttons, adjust the MSPKR (MULTI SPEAKER): volume level of each channel. To switch on the Multi-speaker output ON or 6. After you complete this portion of the set up, OFF, press or cursor buttons. move the cursor to “MAIN” with the or Note: cursor buttons and press the ENTER button. • This setting can be changed when the Surr Back is Notes: set “NONE” in 2-1 SPEAKER SIZE menu and select “SPEAKER C” switch OFF position in • These settings will be memorized to 7.1CH INPUT REAR PANEL. When this setting is unavailable, source. “✽✽✽” is displayed. • This feature can be directly selected with the CH.SEL button of the remote controller.

23

24 ENGLISH

output is DVI-D as well. When DVI-D is set as the input source, monitor DVI-D INPUT (SR8500 only) press the SELECTOR To select DVD, turn the : DVD Example first select the input source on SR7500. Before you can listen to any input media, must DVD player and play the DVD. After you have selected DVD, simply turn on the BASIC OPERATION SELECTING AN INPUT SOURCE (PLAY BACK) ¥ ¥ ¥ ¥ signal. that your TV is set to the proper input view signal for that input will be routed to the When a Video source is selected, the video different sources. permits simultaneous viewing and listening to VCR2 input used remains routed to the When an audio source is selected, the last video configuration process for that source. status which were entered during the surround mode, attenuation, and night mode automatically switch to the digital input, As the input is changed, SR7500 will front-panel. name will also appear in the display, on information on the video display. The input name will appear momentarily an OSD As the input source is changed, new to the DVD If a component video input is connected to the monitor connected to the SR7500. Output or Component Video Output DVD Outputs jacks and will be viewable on a TV DSS knob on the front panel or simply button on the remote. component inputs, it will be routed TUNER TAPE TV

12 and Learning Remote Controller AUX1 DVD DVD CD RC8500SR LIGHT AUX2 CD-R Monitor VCR INPUT FUNCTION DSS AMP MD Output. This . Make certain VCR1 Monitor &

DSS/ Monitor is connected with the video or S-video. Monitor is connected with the component. Example: Notes: in PREFERENCE menu and set ENABLE. To activate this function, select VIDEO CONVERT video or component output terminal. S-video signal can be emitted from the video, S- When this function is activated, the video or VIDEO CONVERT • • • • wrong with the SR7500. equipment incompatibility; there is nothing be used. All of these signs are caused by monitor, or noise is generated, this feature cannot display device, feature, the SR7500 cannot synchronize with If, while attempting to use the video convert terminal. This function is unavailable for the REC out SR7500 by the component terminal. component terminal, connect the monitor and When the video equipment is connected by component video output terminal. The component video signal is emitted only from MONITOR OUT terminal under S-VIDEO. S-video input signal to the display device via MONITOR OUT terminal under VIDEO and the the video input signal to display device via PREFERENCE menu to DISABLE. Also, connect In such case, set VIDEO CONVERT in the forward and reverse playing of the video component. This function is unavailable for the still picture, fast or component or S-VIDEO or S-VIDEO component VIDEO VIDEO “ AV SURROUND RECEIVER SR7500 AV SURROUND RECEIVER SR7500 AV SURROUND RECEIVER SR7500 NO SIGNAL ENTER ENTER ENTER or S-VIDEO or S-VIDEO component VIDEO VIDEO ”

appears on the

(Using the remote control unit) (Using the SR7500) displayed. Press the button and press the To select the surround mode, press press the To select the surround mode during playback, Example: AUTO SURROUND Notes of OSD menu: component to the video or S-video. The signal cannot be converted from the

SELECTING THE SURROUND MODE Note: • • • OE NOFPHONES POWER ON/OFF CONVERT function are set ENABLE. displayed through all video out when the VIDEO The setting informations (e.g. volume setting) are video out (COMPONENT, S-VIDEO, VIDEO). The setup menu can be displayed through all out only. informations are displayed through the S-VIDEO outputs are used simultaneously, the setting DISABLE. When the S-VIDEO and VIDEO when the VIDEO CONVERT function are set displayed through the S-VIDEO or VIDEO out The setting informations (e.g. volume setting) are STANDBY COMPONENT OUT. signal is emitted from the COMPONENT IN to No setting information is displayed when the INPUT SELECTOR AUTO AV SURROUND RECEIVER SR7500 button on the front panel. AUTO (D1) DISP SLEEP MULTI AUTO URDIRECT SURR AUTO > TUNED button until PAGE1 is button. TUNER TAPE CH 12 USE Learning Remote Controller AUX1 CD PAGE RC8500SR LIGHT 123 AUX2 CD-R 4 VOL AMP MD

D5 D5 D4 D3 D2 D1 AMP

M tastes or room acoustics. the Bass and Treble Control During a listening session you may wish to adjust Notes: press decrease the volume, turn counterclockwise or clockwise or press To increase the volume, turn / VOLUME Adjust the volume to a comfortable level using GHT TREBLE) CONTROL ADJUSTING THE TONE (BASS & ADJUSTING THE MAIN VOLUME EAK ATT EQ DIGITAL AAC ANALOG

PCM • • buttons on the remote. LSSR S SL DIGITAL SURROUND L LFE C ∞ The volume can be adjusted within the range of range is (In this case the maximum volume adjustment to 18 dB. +1 dB or greater, the volume cannot be adjusted up if the volume for any channel is set at 20, on page However, when the channel level is set as described R VOL to 18 dB, in steps of 1 dB. control knob “ IIA IE R L VIDEO DIGITAL DOWN

18 dB - Maximum value of channel level) button on the remote. S-VIDEO AUX 1 INPUT VOLUME TUNER TAPE CH VOL 12 USE AUDIO UP Learning Remote Controller AUX1

CD on the front panel PAGE RC8500SR LIGHT 3

AUX2 CD-R button on the remote, to

to suit your listening VOL AMP MD D5 D5 D5 D4 D3 D3 D2 D2 D1 M CH 1CH 7 PREV MENU TEST VOLUME 1 LIP.SYNC CH.SEL GUIDE OK ATT 2

or VOL MUTE SPK-AB SURR VOL EXIT 3 knob – (Using the remote control unit) OFF 10 20 30 40 This additional channel provides the opportunity To adjust the tone, press the AMP button and SURROUND MODE for more detailed imaging behind the listener and press the > button PAGE3 is displayed. 90 80 70 60 50 brings more depth, spacious ambience and sound To adjust the bass effect, press BASS+ (D2) or localization than ever before. The SR7500 is equipped with many surround BASS– (D3). The sleep time will be shown for a few seconds in THX Surround EX will operate for any 5.1 channel modes. These are provided to reproduce a variety the display on the front panel, and it will count source whenever THX is active.

To adjust the treble effect, TREB+ (D4) or TREB– ENGLISH of surround sound effects, according to the content (D5). down until the time has elapsed. THX Surround EX is not available in the system of the source to be played. When the programmed sleep time has elapsed, without surround back speaker(s). Note: The available surround modes may be restricted the unit will automatically turn off. depending on the input signal and speaker setup. Note: • The tone control function can work in the AUTO Note that the SLEEP indicator on the display will Surround, Stereo, Dolby Pro Logic IIx , DTS, illuminate when the Sleep function is programmed. • When playing Dolby Digital Surround EX- DTS-ES, and Multi Ch. Stereo mode. To cancel the Sleep function, press the SLEEP AUTO encoded software in 6.1 channels, it is required to set the THX Surround EX mode. button until the display shows “SLEEP OFF” and When this mode is selected, the receiver the SLEEP indicator will disappear. determines whether the digital input signal is Dolby 2 TEMPORARILY TURNING OFF Digital, Dolby Digital Surround EX, DTS, DTS-ES, MODE THE SOUND DTS 96/24 or PCM-audio. (Dolby Digital, Pro Logic IIx MOVIE, Pro Logic Surround EX & DTS-ES will operate for multichannel NIGHT MODE IIx MUSIC, Pro Logic IIx GAME) source that has a Dolby Digital Surround EX or DTS- This mode is used with source materials encoded ES auto trigger flag in the digital signal. in Dolby Digital and Dolby Surround.

M When a Dolby Digital or DTS signal is input, the OK number of channels for which the corresponding D1 DOLBY DIGITAL signal is encoded will be played. D2 This mode is enabled when playing source LIP.SYNC D3 Inputting a Dolby Digital two channel signal with PREV MUTE materials encoded in Dolby Digital. GUIDE D4 Dolby surround status automatically subjects that MENU EXIT Playing multichannel encoded 6.1 or 7.1-channel USE PAGE 3 TEST CH.SEL SURR signal to Pro Logic IIx movie processing before 1 2 3 D5 Dolby Digital sources provides five main audio 7.1CH ATT SPK-AB play. D5 channels (left, center, right, surround left and 4 5 6 PCM 96 kHz source material can be played in this DISP OSD SLEEP CH VOL surround right) and Low Frequency Effect 7 8 9 mode. channel. TUNER CD CD-R MD Notes: Dolby Digital EX decoding is not available in this To temporarily silence all speaker outputs such as TAPE AUX1 AUX2 AMP LIGHT mode. when interrupted by a phone call, press the MUTE 12 • When you use this mode with certain DVD and RC8500SR button on the remote. Learning Remote Controller CD players, performing operations such as “Skip” Dolby Pro Logic IIx brings the excitement of This will interrupt the output to all speakers and the or “Stop” may momentarily interrupt the output. surround sound to any stereo mix, while making head-phone jack, but it will not affect any recording • When the signal is not decoded, the mode is To select the NIGHT mode, press the AMP button existing Dolby Surround mixes sound more like or dubbing that may be in progress. changed to AUTO mode automatically. Refer to and press the > button until PAGE3 is displayed. discrete 5.1 channels Surround sound. When the system is muted, the display will show page 24 to confirm the available decoding mode. Press the NIGHT (D1) button. Dolby Pro Logic IIx has 3 modes. Please see “MUTE” . Selecting the Night Mode ON is effective in Dolby below. Press the MUTE button again to return to normal Digital only, and it compresses the dynamic range. THX Pro Logic IIx MOVIE operation. This softens loud passages such as sudden THX mode applies additional processing to Dolby This mode provides 6.1 or 7.1 channel surround explosions, to help prevent disturbing others late Digital, DTS, and Dolby Pro Logic multi-channel, sound from Dolby Surround encoded stereo movie at night. surround sources. The THX processing was sound tracks. USING THE SLEEP TIMER To turn off the Night mode, press the NIGHT developed by Lucasfilm Ltd. to recreated the Pro Logic IIx MUSIC button again. sound of top-quality theater. This mode provides 6.1 or 7.1 channel surround

LIP.SYNC Use the THX mode for all movies on disc, tape or sound from conventional stereo sources, analog or PREV MUTE GUIDE broadcast. In this mode, THX Surround EX will not digital, such as CD, Tape, FM, TV, Stereo VCR, MENU EXIT TEST CH.SEL SURR operate in this mode. etc. 1 2 3 7.1CH ATT SPK-AB Pro Logic IIx GAME 4 5 6 DISP OSD SLEEP THX SURROUND EX Game mode restores the impact low-frequency 7 8 9 surround effects by routing them to the system’s CLEAR THX0 MEMO In a movie theater, film soundtracks that have been subwoofer. encoded with Dolby Digital surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program. To program the SR7500 for automatic standby, This channel, called Surround Back, places press the SLEEP button on the remote. sounds behind the listener in addition to the Each press of the button will increase the time currently available front left, front center, front before shut down in the following sequence. right, surround right, surround left and subwoofer channels. 25

26 ENGLISH

DTS-ES (Discrete 6.1, Matrix 6.1) Dolby Digital EX surround back speaker. DTS-ES is not available in the system without a reproduction. back channel(s) and higher quality of audio recording of all channels including the surround DTS-ES Discrete 6.1 features digital discrete DVD, etc.. DTS-ES Matrix-encoded program sources from which can handle DTS-ES Discrete-encoded and This receiver incorporates a DTS-ES decoder, reproduction. movement more natural with the 6.1-channel acoustic positioning and makes image the DTS 5.1-channel format to improve DTS-ES adds the surround center channel audio to without surround back speaker(s). Dolby Digital EX is not available in the system localization than ever before. brings more depth, spacious ambience and sound for more detailed imaging behind the listener and This additional channel provides the opportunity channels. right, surround left and subwoofer currently available front left, center, sounds behind the listener in addition to This channel, called Surround Back, places program. which has been added during the mixing of technology are able to reproduce an extra channel encoded with Dolby Digital surround EX In a movie theater, film soundtracks that have been has been selected. This mode cannot be used when an analog input material such as DVD. DOLBY DIGITAL EX, DTS-ES encoded source This mode provides 6.1 channel surround for EX/ES Notes: • • •

kHz, 44.1 kHz or 48 kHz. processing when the sampling frequency is 32 PCM-audio signals can be subjected to Pro Logic format. signal which is encoded in Dolby Digital or PCM Pro Logic IIx mode is available for a 2ch input SPEAKER SETUP, page 19) is set NONE in SPEAKER SETUP menu. (See mode when the SURROUND BACK SPEAKER Pro Logic IIx mode will decode as II

Notes: Mono (dts, Neo:6 Cinema, Music) CS Depending on source material, you can select broadcast, videotape and stereo recorded music. entire collection of music and film, including to 6.1 channels of surround performance from Backward compatibility provides listeners with up multichannel encoded material. surround sound playback of non-encoded and Circle Surround is designed to enable multichannel (CS CIRCLE SURROUND reproduces a mix of the right and left channel. surround speaker. Additionally, the center channel right channel signal to both front and both left front and surround speaker the This is done by feeding the left channel signal to natural soundstage from two channel source material. This mode is used to create a wider, deeper and more MULTI CH. ST mode optimized for music playback. optimized for movie playback or the NEO:6 MUSIC NEO:6 uses either the CINEMA mode According to the signals be played back, DTS channels as well in channel separation. properties in the frequency characteristics of The DTS NEO:6 decoder has near-discrete technology. channel signals using high-accuracy digital matrix This mode decodes 2-channel signals into 6- Neo:6 Cinema, Music input has been selected. The DTS mode cannot be used when an analog dts-ES decoding is not available in this mode. Low Frequency Effect channel. center, right, surround left and right) sources provides five main audio channels (left, Playing multichannel encoded 5.1-channel dts materials encoded in dts multichannel. dts some 2 channel sources. such as LASER DISC, CD, and DVD. Neo:6 is for This mode is for DTS encoded source materials MODE dts II II : This mode is enabled when playing source • • -Cinema -CINEMA, CS kHz, 44.1 kHz or 48 kHz. processing when the sampling frequency is 32 PCM-audio signals can be subjected to Pro Logic are encoded in Dolby Digital or PCM format. Neo:6 mode is available to 2ch input signals which mode. mode, II -MUSIC, CS II CS II -Music II -MONO) mode or CS II

-

NOTE for DTS signal Notes: CAUTION this mode. 96 kHz PCM source material can be played back in reproduction. full range frequency response and the purist audio bass management configuration are bypassed for In the pure direct mode, tone control circuit and PURE DIRECT back in stereo mode. stereo. 96 kHz PCM source material can be played multichannels are converted to two channel With Dolby Digital and DTS sources, the 5.1 analog stereo is input. channels play normally when PCM-audio or In stereo program sources, the left and right This mode bypasses all surround processing. STEREO Logic or DTS. broadcasts), including Dolby Digital, Pro source (such as found on DVDs and digital playback system playing any multichannel audio experience from a two-speaker (front L and R) This mode creates a virtualized surround sound VIRTUAL Notes: Connected DVD-player, laser-disc player or CD- * DTS data. and the SR7500 cannot recognize signal as sampling frequency, or frequency response) been processed (such as the output level, digitally. This is because the digital signal has even if you connect the player to SR7500 signals from certain CD players and LD may not be able to play some DTS source player needs to support DTS-digital output. You • • • • or CD players, performing operations such as When you use this mode with certain DVD and defeated. Tone controls and additional processing are also and Subwoofer = YES automatically. LARGE LARGE, Center = Surround L/R Internal speaker size is setup to front L/R = kHz, 44.1 kHz or 48 kHz. processing when the sampling frequency is 32 PCM-audio signals can be subjected to Pro Logic format. which are encoded in Dolby Digital or PCM IICS mode is available for 2ch input signals “ Stop ” may momentarily interrupt the output. “ Skip

”

NOTE for HDCD signal (SR8500 only) NOTE for 96kHz PCM audio NOTE for Dolby Digital Surround EX signal You may not be able to play some HDCD source * AUTO, PURE DIRECT, and STEREO modes * HDCD is effective only at the time of digital * Some DVD formatted discs feature copy * Certain DVD player models inhibit digital output. * AUTO, PURE DIRECT, and STEREO modes * Note that some of Dolby Digital Surround EX- * When playing Dolby Digital Surround EX- * The outputs for the VCR 1 OUT, DSS/VCR 2 * You can not listen to DTS-encorded course in * While signals from DTS-laser disc or CD are * Depending on the player used, DTS play may * recognize the signal as HDCD data. frequency response) and the SR8500 cannot (such as the output level, sampling frequency, or because the digital signal has been processed the player to SR8500 digitally. This is signals from certain CD players if you connect as from CD discs that contain HDCD). can be used when playing HDCD signals (such input. details, refer to the player signal is not output from the DVD player. For protection. When using such disc, 96 kHz PCM manual. For details, refer to the player SR7500 will be muted. in one of the other surround modes, output from audio). If such signals are input during playback DVD-Video discs that contain 24 bit, 96 kHz sampling frequency of 96 kHz (such as from can be used when playing PCM signals with a mode manually. identification signal. In this case, set the EX/ES encoded software does not contain the to set the EX/ES mode. encoded software in 6.1 channels, it is required noise. the DTS-encoded signal will be recorded as that support DTS using these outputs. If you do, audio signals. Do not record from CDs or LDs OUT, TAPE and CD-R OUT output analog Multi room. MENU or the A/D button. analog input by INPUT SETUP in MAIN switch to digital input or from playing in another Surround mode, you cannot produce a short noise. This is not malfunction. ’ s operation manual. ’ s operation The relation between the selected surround Output Channel Front information display Surround Mode Input Signal Decoding SL SBL mode and the input signal L/R C SubWSignal format indicators Channel status The surround mode is selected with the surround SR SBR mode selector on SR7500 or the remote control AUTO Dolby Surr. EX Dolby Digital EX OOOOO 2 DIGITAL EX L, C, R, SL, SR, S, LFE unit. However, the sound you hear is subject to the Dolby D (5.1ch) Dolby Digital 5.1 OOO - O 2 DIGITAL L, C, R, SL, SR, LFE Dolby D(2ch) Dolby Digital 2.0 O ----2 DIGITAL L, R relationship between the selected surround mode ENGLISH and input signal. That relationship is as follows; Dolby D (2ch Surr) Pro IILogicx movie OOOO - 2 DIGITAL2 , SURROUND L, R, S DTS-ES DTS-ES OOOOO dts, ES L, C, R, SL, SR, S, LFE DTS 96/24 DTS 96/24 OOO - O dts 96/24 L, C, R, SL, SR, LFE DTS (5.1ch) DTS 5.1 OOO - O dts L, C, R, SL, SR, LFE PCM(Audio) PCM (Stereo) O ----PCM L, R PCM 96kHz PCM (96kHz Stereo) O ----PCM L, R HDCD* Stereo O - - - - PCM, HDCD L, R Analog Stereo O - - - - ANALOG - PURE DIRECT Dolby D Surr. EX Dolby Digital EX OOOOO 2 DIGITAL EX L, C, R, SL, SR, S, LFE Dolby D (5.1ch) Dolby Digital 5.1 OOO - O 2 DIGITAL L, C, R, SL, SR, LFE Dolby D (2ch) Dolby Digital 2.0 O ----2 DIGITAL L, R Dolby D (2ch Surr) Pro IILogicx movie OOOO - 2 DIGITAL2 , SURROUND L, R, S DTS-ES DTS-ES OOOOO dts, ES L, C, R, SL, SR, S, LFE DTS 96/24 DTS 96/24 OOO - O dts 96/24 L, C, R, SL, SR, LFE DTS (5.1ch) DTS 5.1 OOO - O dts L, C, R, SL, SR, LFE PCM (Audio) PCM (Stereo) O ----PCM L, R PCM 96kHz PCM (96kHz Stereo) O ----PCM L, R HDCD* Stereo O - - - - PCM, HDCD L, R Analog Stereo O - - - - ANALOG - EX/ES Dolby D Surr. EX Dolby Digital EX OOOOO 2 DIGITAL EX L, C, R, SL, SR, S, LFE Dolby D (5.1ch) Dolby Digital EX OOOOO 2 DIGITAL L, C, R, SL, SR, LFE DTS-ES DTS-ES OOOOO dts , ES L, C, R, SL, SR, S, LFE DTS 96/24 DTS-ES OOOOO dts 96/24 L, C, R, SL, SR, LFE DTS(5.1ch) DTS-ES OOOOO dts L, C, R, SL, SR, LFE DOLBY Dolby D Surr. EX Dolby Digital 5.1 OOOOO 2 DIGITAL EX L, C, R, SL, SR, S, LFE (PLII x movie) Dolby D (5.1ch) Dolby Digital 5.1 OOOOO 2 DIGITAL L, C, R, SL, SR, LFE (PLII x music) Dolby D (2ch) ProIIx Logic OOOO - 2 DIGITAL L, R (PLII x game) Dolby D (2ch Surr) ProIIx Logic OOOO - 2 DIGITAL2 , SURROUND L, R, S PCM (Audio) Pro IILogicx OOOO - PCM L, R HDCD* Pro LogicII x OOOO - PCM, HDCD L, R Analog Pro IILogicx OOOO - ANALOG - DTS DTS-ES DTS 5.1 OOO - O dts, ES L, C, R, SL, SR, S, LFE (Neo:6 Cinema) DTS 96/24 DTS 96/24 OOO - O dts 96/24 L, C, R, SL, SR, LFE (Neo:6 Music) DTS (5.1ch) DTS 5.1 OOO - O dts L, C, R, SL, SR, LFE PCM (Audio) Neo:6 OOOO - PCM L, R Analog Neo:6 OOOO - ANALOG - Dolby D (2ch) Neo:6 OOOO - 2 DIGITAL L, R Dolby D (2ch Surr) Neo:6 OOOO - 2 DIGITAL2 , SURROUND L, R, S CSII Cinema PCM (Audio)II CS OOOOO PCM L, R CSII Music HDCD* CSII OOOOO PCM, HDCD L, R CSII Mono AnalogII CS OOOOO ANALOG - Dolby D (2ch)II CS OOOOO 2 DIGITAL L, R Dolby D (2ch Surr)II CS OOOOO 2 DIGITAL2 , SURROUND L, R, S STEREO Dolby Surr. EX Stereo O -- -O 2 DIGITAL EX L, C, R, SL, SR, S, LFE Dolby D (5.1ch) Stereo O -- -O 2 DIGITAL L, C, R, SL, SR, LFE Dolby D (2ch) Stereo O ----2 DIGITAL L, R Dolby D (2ch Surr) Stereo O -- -O 2DIGITAL2 , SURROUND L, R, S DTS-ES Stereo O -- -O dts, ES L, C, R, SL, SR, S, LFE DTS 96/24 Stereo O -- -O dts 96/24 L, C, R, SL, SR, LFE DTS (5.1ch) Stereo O -- -O dts L, C, R, SL, SR, LFE PCM (Audio) Stereo O ----PCM L, R PCM 96kHz Stereo O ----PCM L, R HDCD* Stereo O - - - - PCM, HDCD L, R Analog Stereo O - - - - ANALOG - *: SR8500 only 27

28 ENGLISH Abbreviations Notes: urudMd nu inlDecoding Input Signal Surround Mode H ob ur XTHX Surround EX + Dolby Digital Dolby Surr. EX THX Multi Channel Stereo Multi Channel Stereo Dolby D (5.1ch) Dolby Surr. EX Stereo Multi Ch. Virtual Dolby Surr. EX Virtual • • B/B Surround Back speakers SBL/SBR : Dolby Digital (2 ch: Lt/Rt): signal with No sound outputs from the surround speaker, no surround data. center speaker and subwoofer if the DVD disc has Surround flag Speakers are full set. LS Surround speakers SL/SR : uW:Sub woofer speaker SubW : / Front speakers L/R : Center speaker C : C Ado THX + Pro Logic THX + DTS THX + DTS THX + DTS-ES HDCD PCM (Audio) DTS (5.1ch) THX + Pro Logic DTS 96/24 THX + Pro Logic Multi Channel Stereo DTS-ES THX + Dolby Digital Dolby D (2ch Surr) Dolby D (2ch) Dolby D (5.1ch) Multi Channel Stereo DTS-ES DTS 5.1 Analog HDCD PCM (Audio) Multi Channel Stereo DTS (5.1ch) Multi Channel Stereo Virtual DTS-ES Dolby D (2ch Surr) Dolby D (2ch) Virtual Virtual Virtual Analog HDCD PCM (Audio) Virtual DTS (5.1ch) Virtual DTS-ES Virtual Dolby D (2ch Surr) Dolby D (2ch) Dolby D (5.1ch) nlgTHX + Pro Logic Analog * * * THX + Pro Logic Multi Channel Stereo Virtual II II II II II x x x x x / C L/R OOOO OOOO OOOO OOO OOO OOOOO OOOO OOOO OOO OOOOO OOOO OOOO OOOO OOO OOOOO OOOO OOOO OOO OOOOO O O O O O O O O O uptCanlFront information display Output Channel NLG- L, C, R, SL, SR, LFE L, R L, C, R, SL, SR, LFE L, ANALOG PCM, HDCD - R - - dts - dts, ES ------PCM ------RSBR SR LSBL SL - - - - - SubW O O O O O NLG- L, R L, R - L, R L, R ANALOG PCM, HDCD - PCM - - - - ANALOG PCM, HDCD - PCM - - - - t L, C, R, SL, SR, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, S, LFE L, C, R, SL, SR, LFE L, C, R, SL, SR, S, LFE dts dts 96/24 dts, ES 2 2 2 2 dts dts, ES 2 2 2 2 Channel status 2 2 2 2 Signal format indicators DGTLL, R L, C, R, SL, SR, LFE L, C, R, SL, SR, S, LFE L, R L, C, R, SL, SR, LFE DIGITAL , DIGITAL DIGITAL L, C, R, SL, SR, S, LFE DIGITAL EX L, R L, C, R, SL, SR, LFE DIGITAL , DIGITAL DIGITAL L, C, R, SL, SR, S, LFE DIGITAL EX DIGITAL , DIGITAL DIGITAL DIGITAL EX 2 2 2 SRON L, R, S SURROUND SRON L, R, S SURROUND URUDL, R, S SURROUND * : SR8500 only OTHER FUNCTION ATTENUATION TO ANALOG INPUT DOLBY HEADPHONE MODE VIDEO ON/OFF SIGNAL This feature simulates the waveforms of the actual When no video signal is connected to the SR7500 sounds heard from the speakers. or a DVD, etc., is connected directly to your TV, the TV AUTO ON/OFF FUNCTION When headphones are used, the MENU button unnecessary video circuit can be turned off by

LIP.SYNC

automatically switches to the Dolby headphone selecting the “VIDEO OFF” setting. ENGLISH This function allows the component connected to PREV MUTE GUIDE mode. To select video off, press the AMP button and the TV-VIDEO in jack to control the power (ON/ MENU EXIT TEST CH.SEL SURR The OSD that appears when the MENU button is press the > button until PAGE 4 is displayed. Press OFF) to the SR7500. 1 2 3 pressed is shown below. the V-OFF button. 7.1CH ATT SPK-AB 4 5 6

DISP OSD SLEEP AUTO POWER ON 7 8 9 HEAD PHONE M

THX D1 CLEAR 0 MEMO UND RECEIVER SR7500 1. Be sure the TV auto mode is ENABLED. DOLBY HP MODE : BYPASS D2 D3 (Refer to page 22: PREFERENCE) DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL ✽✽✽ SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL SURROUND : L C R LFE AAC PCM 2. Connect your TV TUNER (etc) to the TV- SL S SR D4 USE PAGE 4 L LEVEL : 0dB VIDEO in terminal. Be sure to connect the If the selected analog audio input signal is greater D5 R LEVEL : 0dB D5 VIDEO input. than the capable level of internal processing, the ENTER ONES 3. Turn OFF the power to the TV TUNER and the “PEAK” indicator will light up on the front display. CH VOL SR7500. If this happens, you should press the ATT button TUNER CD CD-R MD on the remote. TAPE AUX1 AUX2 AMP 4. Turn ON the TV TUNER and tune in a LIGHT 12

“ATT” indicator will be illuminated when this RC8500SR receivable station. Learning Remote Controller function is activated. The signal-input level is When the station is received, the SR7500 5. reduced by about half. Attenuation will not work DOLDBY HP (Headphone) MODE can be selected turns ON and TV is selected automatically. with the left and right cursor buttons. with the output signal of TAPE-OUT, CD-R/MD- → → → → OUT, VCR1-OUT and DSS/VCR2-OUT. BYPASS DH1 DH2 DH3 BYPASS AUTO POWER OFF This function is memorized for each individual DISPLAY MODE input source. BYPASS: Bypasses the Dolby headphone mode 1. In the above situation, turn the TV TUNER and delivers ordinary 2-channel stereo. OFF or select a channel that does not contain DH1: The size of a typical living room space AV SURROUND RECEIVER SR7500 LIP.SYNC any broadcast. is simulated. R PREV MUTE GUIDE

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND MENU EXIT DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL The power to the SR7500 switches to LISTENING THROUGH HEADPHONES L C R 2. LFE TEST CH.SEL SURR DH2: The expansiveness of a structure as AAC PCM SL S SR STANDBY after approx. 5 minutes. 1 2 3 This jack may be used to listen to the SR7500’s large as a music hall is simulated. 7.1CH ATT SPK-AB 4 5 6 Notes: output through a pair of headphones. Be certain DH3: A large space such as that found in a DISP OSD SLEEP 77 8 9 that the headphones have a standard 1/4” stereo ENTER movie theater is simulated. PHONES • AUTO POWER OFF is canceled if the SR7500 is THX phono plug. (Note that the speakers will CLEAR 0 MEMO set to a source other than TV. When the PURE DIRECT mode is selected, Dolby automatically be turned off when the headphone The function reactivates when TV is selected again. surround processing is bypassed and “✽✽✽” is jack is in use.) • Some TV broadcasts may cause the TV AUTO displayed as the mode indication. FUNCTION to turn ON. You can select the display mode for the front AV SURROUND RECEIVER SR7500 The surround mode can be selected when any of

• The S-Video terminal does not support “TV INPUT SELECTOR the modes in DH1, DH2, or DH3 is selected. display of the SR7500. To select this mode, press the DISPLAY on the AUTO ON/OFF” function. DISP MULTI AUTO TUNED ST SPK SLEEP AUTO SURR DIRECT DISC 6.1 L/R LEVEL can be set in the ±10 dB range. remote control or the front panel. Notes: When this button is pressed, the display mode is • The surround mode returns to the previous setting switched in the following sequence. STANDBY → → → POWER ON/OFF PHONES as soon as the plug is removed from the jack. Surround Mode Auto-display Off Display → → • TONE cannot be set when any of the modes in Off Input Function Surround Mode.... DH1, DH2, or DH3 is selected. In Auto display off mode, the display is off. But, if you make a change to the unit such as input or • The Dolby Headphone function will not work surround mode, the display will show that change, when 32 or 96 kHz PCM digital signals are input. Note: then go back to off after about 3 seconds. When • The surround mode returns to the previous setting changing the volume, it is not displayed. as soon as the plug is removed from the jack. In Display off mode, the display is off completely. Note: • Only the DISP indicator will be illuminated on the front display in display off condition.

29 30 ENGLISH switched in the following sequence. When this button is pressed, the input mode page 19) use INPUT SETUP in OSD menu system. (see If you need to change the input mode completely, stored in memory. This selecting is temporary, so the result will not be In analog mode, the input jacks are selected. input terminal. In Digital mode, input is fixed to an assigned digital jacks are selected automatically. If no digital signal is being input, the analog input selected input source are detected automatically. input to the digital and analog jacks for In Digital Auto mode, the types of signals being PAGE4 is displayed. Press the Press the each input source as following procedures. can temporarily select the audio input mode for If you have already assigned the digital inputs, → OR DIGITAL AUDIO INPUT SELECTING ANALOG AUDIO INPUT Digital Auto AMP → button and press the Digital TUNER TAPE CH 12 USE Learning Remote Controller AUX1 CD PAGE RC8500SR → LIGHT AUX2 Analog CD-R 4 VOL AMP MD D5 D5 D4 D3 D3 D2 D1 M A/D (D3) → Digital Auto.... > button until

button.

To record the input source signal you are

currently watching or listening to in the record mode. CD-R/MD OUT, VCR1 machines connected to the outputs for listening to may be recorded simply by placing This means that any program you are watching or the record outputs. selected for listening through the SR7500 is sent to In normal operation, the audio or video source

3. 2. 1. RECORDING AN ANALOG SOURCE OE NOFPHONES POWER ON/OFF

STANDBY desired. Start recording to the component as recording. VCR1 OUT, output to the The currently selected input source signal is watch or listen to it as desired. The input source is now selected and you may selector the front panel or simply press the Select the input source to record by turning 1. INPUT SELECTOR INPUT FUNCTION SELECTOR AV SURROUND RECEIVER SR7500 buttons on the remote. and DISP SLEEP TAPE OUT, CD-R/MD MULTI AUTO URDIRECT SURR AUTO DSS/VCR2 OUT

TUNED 1. and TUNER TAPE DSS/VCR2 OUT TV 12 Learning Remote Controller AUX1 DVD CD TAPE OUT, RC8500SR outputs for LIGHT AUX2 CD-R VCR knob on input

DSS AMP MD

Notes: Recording the video from one source and

VCR2 OUT jack. video cassette recorder connected to the DSS/ video from a camera connected to VCR1 compact disc player connected to CD IN and the Below is an example of recording the sound from a recordings. video of another source to make your own You can add the sound from one source to the audio from another 3. 2. 1. • • • terminals, but the analog ones as well. components, do not connect only the digital When connecting CD players and other digital analog . outputs. There is no conversion from digital to Digital input signals are only output to the digital You cannot record the surround effects. selected input source. you will record the signals from newly If you change the input source during recording, remote. Now pressing the Switch the audio input source to CD by simply the remote. simply pressing the Switch the video output source to VCR1 by source. input source and “

CD 2. 1. ” has been selected as the audio input selector TUNER TAPE TV 12 Learning Remote Controller AUX1 “ DVD CD VCR1 input selector RC8500SR LIGHT AUX2 CD-R VCR ” DSS AMP MD as the video input buttons on the buttons on MULTI sources This permits simultaneous viewing with video input used remains routed to the When 7.1 CH. INPUT is selected, the last video jack. jack is output to the PRE OUT SW (subwoofer) In addition, the signal input to SW (subwoofer) the surround circuitry. well as the pre-out jacks without passing through and right) surround back speaker systems as to the front (left and right), center, surround channels of the 7.1 CH. In jacks are output directly (surround back left) and SBR right) (surround left), SR right) and SBL to the L(front left), R (front right), CENTER, SL When this is selected, the input signals connected multichannel player or DVD-Audio player. through the use of Multi channel SACD The SR7500 is equipped for future expansion AB SPEAKERS A/B You can select these systems by pressing system- B for front L/R channels. SR7500 has speaker system - A and AUTO 7.1 CH INPUT SPEAKER A/B URDIRECT SURR AUTO TUNED ST DISC 6.1 on the remote. SPKR A B ENTER MTX 6.1 MTX V-OFF NIGHT PEAK ATT EQ DIGITAL AAC ANALOG PCM LSSR S SL DIGITAL SURROUND L LFE C R button on the front panel or IIA VIDEO DIGITAL DOWN S-VIDEO AUX 1 INPUT VOLUME Monitor Outputs CLEAR 7.1CH PREV MENU TEST DISP 7 4 1 LIP.SYNC CH.SEL GUIDE THX OSD ATT 0 8 5 2 MUTE SPK-AB MEMO SLEEP SURR EXIT 9 6 3 SPK- . To cancel the 7.1 CH. INPUT setting, press the 7.1 1. 2. CH INPUT button on the front panel or press 7.1 LIP.SYNC CH on the remote. Depending on the image device (TV, monitor, AV SURROUND RECEIVER SR7500

INPUT SELECTOR Notes: projector, etc.) connected to the SR7500, a time lag can occur between image signal processing DISP MULTI AUTO TUNED ST SPKR A SLEEP AUTO SURR DIRECT DISC 6.1 • When the 7.1 CH. Input is in use, you may not

and audio signal processing. Though minor, this ENGLISH select a surround mode, as the external decoder time lag can interfere with movie and music determines processing. CH VOL enjoyment. The LIP.SYNC feature delays the

STANDBY E • In addition, there is no signal at the record outputs POWER ON/OFF PHONES audio signal with respect to the image signal 4. when the 7.1 CH. Input is in use. output from the SR7500 to correct the time lag OK between the sound and image. It can be operated 4. with the “LIP.SYNC” and and cursor buttons of LIP.SYNC PREV MUTE the remote controller. Set the remote controller to GUIDE 4. MENU EXIT AUX2 INPUT the AMP mode before operating the LIP.SYNC TEST CH.SEL SURR 1 2 3 If you don’t need to connect 7.1 Ch. input terminals feature. The initial setting is OFF (0 ms).The time 3. 7.1CH ATT SPK-AB 4 5 6 lag can be adjusted in 10 ms steps up to 200 ms. VOLUME with multi channel decoder, DISP OSD SLEEP 7 8 9 Watch the picture on the image device (i.e., TV, SURROUND L(front left) and R (front right) inputs terminals are DIGITAL L C R 2. LFE CM SL S SR monitor, projector, etc.) as you adjust the time lag. DOWN UP CLEAR THX0 MEMO available as AUX2 input. In this case, You can connect additional audio Note: source to AUX2 as other audio input terminals. • The LIP.SYSNC feature turns OFF (0 ms) in the AUX 1 INPUT DIGITALS-VIDEO VIDEO LAUDIO R PURE DIRECT mode. When the PURE DIRECT

AV SURROUND RECEIVER SR7500 mode is deactivated, the set value of the INPUT SELECTOR LIP.SYSNC feature is automatically restored.

DISP MULTI AUTO

SLEEP AUTO SURR

1. Select a desired Video source to decide the CH VOL routed video signal to the Monitor Outputs.

STANDBY 2. Press the 7.1 CH INPUT button on the front POWER ON/OFF PHONES OK panel or press 7.1 CH on the remote to switch

the 7.1 channel input. LIP.SYNC LIP.SYNC PREV MUTE 3. If it is necessary to adjust the output level of GUIDE MENU EXIT each channel, press the CH.SEL button on TEST CH.SEL SURR 1 2 3 the remote. 7.1CH ATT SPK-AB 4 5 6 Adjust the speaker output levels so that you DISP OSD SLEEP 7 8 9 can hear the same sound level from each CLEAR THX0 MEMO speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between Ð10 to +10 dB. The subwoofer can be adjusted between Ð15 and +10 dB. These adjustments result will be stored to 7.1 CH. INPUT memory. 4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote.

31

32 ENGLISH

(Using the SR7500)

AUTO TUNING Note: Default setup is 9 kHz step, if your country Frequency scan step for AM is selectable. the tuner mode is engaged. the TUNER button on remote control so that To operate the unit from remote control, press change. the remote more than 6 seconds. Scan step will standard is 10 kHz step, Press

BASIC OPERATION 3. 2. 1. LISTENING TO THE TUNER (TUNER) DISP SLEEP

MULTI

AUTO URDIRECT SURR 2. AUTO • TUNED this setup. Preset memory for the tuner will clear by changing a station is tuned in. Automatic searching begins then stops when tuning function. panel for more than 1 second to start the auto Press the press the To select tuner and desired band (FM or AM), ST DISC 6.1 SPKR A B ENTER MTX 6.1 MTX V-OFF NIGHT PEAK

ATT EQ 1. DIGITAL AAC ANALOG PCM LSSR S SL DIGITAL SURROUND L LFE C R BAND

or DIGITAL DOWN button on the front panel. cursor buttons S-VID TUNER TAPE 12 USE TUNER Learning Remote Controller AUX1 CD PAGE SOURCE RC8500SR LIGHT 2 AUX2 CD-R on the front

button on AMP

MD D5 D5 D4 D3 D2 D1 M

2. 3. 3. 1. ’

s

(Using the remote control unit) (Using the SR7500)

MANUAL TUNING the If tuning does not stop at the desired station, use to (Using the remote control unit) 3. 2. 1. 2. 1. 4. 3. 2. 1. DISP SLEEP

MULTI

AUTO URDIRECT SURR 2. AUTO “ TUNED Manual tuning to tune in the deseired station. Press the Press the seconds on the remote. press the To select tuner and desired band (FM or AM), Press the press the To select tuner and desired band (FM or AM), a station is tuned in. Automatic searching begins then stops when Press and hold the Press the seconds on the remote. press the To select tuner and desired band (FM or AM), panel to select the desired station. (D2) ST DISC 6.1 SPKR A B ENTER MTX 6.1 MTX V-OFF NIGHT PEAK

ATT EQ button for 1 second or more. 1. DIGITAL AAC ANALOG PCM LSSR S SL DIGITAL SURROUND L LFE C R BAND

SCAN+ (D1) > > TUNER TUNER button until PAGE2 is displayed button until PAGE2 is displayed. or ” operation. DIGITAL DOWN button on the front panel cursor buttons S-VID button twice within two button twice within two SCAN+ (D1) or TUNER TAPE 12 SCAN USE Learning Remote Controller AUX1 CD PAGE SOURCE RC8500SR LIGHT 2 AUX2 CD-R – on the front (D2) or AMP MD D5 D5 D4 D3 D2 D1 M SCAN

button

2. 3. 3. 1. –

DIRECT FREQUENCY CALL 4. 3. 1. 2. tuned. The desired station will automatically be ten numbered keypad on the remote. Input your desired station show Press the seconds on the remote. press the To select tuner and desired band (FM or AM), “ FREQ - - - - FREQ - GUIDE TUNER TUNER TAPE CLEAR 7.1CH PREV MENU TEST DISP 7 4 1 7 12 Learning Remote Controller AUX1 CD LIP.SYNC RC8500SR CH.SEL LIGHT GUIDE THX OSD ATT ” 0 8 5 2 on the remote, display will . AUX2 CD-R button twice within two MUTE SPK-AB MEMO SLEEP SURR EXIT 9 6 3 9 AMP MD

’

s frequency with the

1. 3. 2. “ At open frequencies, the noise is muted and broadcast is tuned in. The be illuminated on the display. When in the auto stereo mode, (FM) TUNING MODE (AUTO STEREO OR MONO) broadcasts are received in monaural and the “ is displayed. Press the TUNER MODE the station in stereo. In such a case, press If the signal is weak, it may be difficult to tune into again. button or press To return to auto stereo mode, press the indicator is not illuminated. V-OFF R 6.1 TUNED AUTO NIGHT PEAK ATT EQ DIGITAL AAC ANALOG PCM “ LSSR S SL ST DIGITAL SURROUND L LFE MODE C R AUTO button on the front panel.Or press ” indicator is not illuminated, if FM stereo button and press the ” ” and indicator is illuminsted when a stereo indicator is illuminated the display. “ IIA IE R L VIDEO DIGITAL DOWN ST T-MODE S-VIDEO ” AUX 1 INPUT indicators are not illuminated. VOLUME AUDIO T-MODE (D4) UP button on the remote > button until PAGE1 AUTO TUNER TAPE CH TV USE AUX1 DVD CD PAGE button. indicator will 1 AUX2 CD-R VCR VOL MODE DSS AMP MD D5 D5 D4 D3 D2 D1 M “ ST ” PRESET MEMORY MANUAL PRESET MEMORY RECALLING A PRESET STATION PRESET SCAN With this unit you can preset up to 50 FM/AM 3. M M M stations in any order. D1 D1 D1 2. 4. SC TUNER CD CD-R MD D2 D2 D2 For each station, you can memorize the frequency PREV MUTE TAPE AUX1 AUX2 AMP GUIDE 2. D3 D3 D3 MENU EXIT and reception mode if desired. 1. ENGLISH LIGHT 4. TEST CH.SEL SURR 12 DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND D4 D4 D4 DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL 5. L C R RC8500SR LFE 1 2 3 AAC PCM Learning Remote Controller SL S SR USE PAGE 2 4 USE PAGE 2 USE PAGE 2 4 DOW 7.1CH ATT SPK-AB D5 3. AUTO PRESET MEMORY 4 5 6 D5 D5 2. D5 4. DISP OSD SLEEP 3. D5 2. D5 D5 This function automatically scans the FM and AM 7 8 9

ENTER CLEAR THX MEMO band and enters all stations with proper signal DIGI 0 2. 7.1CH ATT SPK-AB (Using the SR7500) TUNER CD CD-R MD strength into the memory. 4 5 6 DISP OSD SLEEP TAPE AUX1 AUX2 AMP 1. Select the desired preset station by pressing 1. 7 8 9 LIGHT 5. 12 2. 4. 2. CLEAR THX0 MEMO the or cursor buttons on the front panel RC8500SR 1. 3. (Using the SR7500) Learning Remote Controller

AV SURROUND RECEIVER SR7500

INPUT SELECTOR 5.VOLUME 1. Tune into the radio station you desire (Refer to (Using the remote control unit)

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL L C R the “MANUAL TUNING” or “AUTO TUNING” LFE AAC PCM SL S SR (Using the remote control unit) DOWN UP 1. Press the TUNER button twice within two section). seconds on the remote. 2. Press the MEMORY button on the front panel. 1. Press the TUNER button twice within two 2. Press the > button until PAGE4 is displayed STANDBY seconds on the remote. ENTER AUX 1 INPUT “– –“ (preset number) starts blinking on the POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO LAUDIO R Press the P-SET+ (D4) or P-SET– (D5) button display. 3. 2. Press the > button until PAGE2 is displayed to tune in the deseired preset station. 3. Select the preset number by pressing the or and press the P-SCAN (D4) on the remote. Or enter the preset station number with the cursor buttons, while this is still blinking “PRESET SCAN” appears on the front display numeric buttons. (approx. 5 seconds) and then the preset station with the lowest 1. To select FM , press the BAND button on the 4. Press the MEMORY button again to enter. preset number is recalled first. front panel. The display stops blinking. 3. Preset stations are recalled in sequence (No.1 → → 2. While pressing the MEMORY button, press The station is now stored in the specified No.2 etc.) for 5 seconds each. the cursor button. preset memory location. No stored preset number will be skipped. “AUTO PRESET” will appear on the display, 4. You can fast forward the preset stations, and scanning starts from the lowest frequency. (Using the remote control unit) press the > button until PAGE4 is displayed and press the P-SET+ (D4) continuously. 3. Each time the tuner finds a station, scanning 1. Tune into the radio station you desire (Refer to will pause and the station will be played for the “MANUAL TUNING” or “AUTO TUNING” 5. When the desired preset station is received, five seconds. section). cancel the preset scan operation by pressing the CLEAR button or P-SCAN (D4) on the During this time, the following operations are 2. Press the MEMO button on the remote. “– –“ remote. possible. (preset number) starts blinking on the display. The band can be changed by the BAND button. 3. Enter the desired preset number by pressing 4. If no button is pressed during this period, the the numeric buttons. current station is memorized in location Preset Note: 02. If you wish to skip the current station, press • When entering a single digit number (2 for example), either input “02” or just input “2” and the cursor button during this period, this wait for a few seconds. station is skipped and auto presetting continues. 5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

33

34 ENGLISH

Note: using the following procedure. You can remove preset stations from the memory CLEARING STORED PRESET STATIONS

4. 3. 1. ST DISC 6.1 2. SPKR A B ENTER MTX 6.1MTX V-OFF NIGHT PEAK •

ATT EQ CLEAR To clear all stored preset stations, press and hold the 2. DIGITAL been cleared. indicate that the specified preset number has “ CLEAR for 5 seconds. While blinking, press the The stored preset number blinks in the display or press the Press the the method described in Recall the preset number to be cleared with station. AAC ANALOG xx CLEAR PCM LSSR S SL DIGITAL SURROUND L LFE

C

R 3. and the button on the front panel or remote. MEMORY IIA V DIGITAL DOWN MEMO ” S-VIDEO appears on the display to ENTER AUX 1 INP VOLUME button on the remote. button on the front panel buttons for two seconds. CLEAR TV 7.1CH TEST DISP “ 4 1 7 Recalling DVD CH.SEL THX OSD ATT 0 8 5 2 VCR SPK-AB MEMO SLEEP SURR ”

6 3 9

DSS a preset

2. 3. sorting will be done. “ I.e. the stations are stored as follows in the sequential order: If you have stations memorized, and there is a gap SORTING PRESET STATIONS and the To sort the numbers, press and hold set 5: sets for 4-9), you can have pre set 10 become (notice there is no stations programmed for pre PRESET SORT OE NOFPHONES POWER ON/OFF STANDBY INPUT SELECTOR 0 105.9 MHz 10) 3 94.7 MHz 3) )93.1 MHz 2) 87.1 MHz 1) AV SURROUND RECEIVER SR7500

cursor buttons. ” will appear on the display and DISP SLEEP MULTI AUTO URDIRECT SURR AUTO TUNED ST DISC 6.1 SPKR A B ENTER MTX 6.1 MTX V-OFF NIGHT PEAK ATT EQ DIGITAL AAC ANALOG PCM LSSR S SL DIGITAL SURROUND L LFE C R IIA IE R L VIDEO DIGITAL DOWN MEMORY S-VIDEO AUX 1 INPUT VOLUME AUDIO UP

stations with the preset memory operation. Before name inputting, you need to store preset characters. channel to be entered using alphanumeric This function allows the name of each preset NAME INPUT OF THE PRESET STATION.

4. 3. 2. 1. OE NOFPHONES POWER ON/OFF CH STANDBY CLEAR PREV → the front panel or When you press the entry ready status. indicator flashes, indicating the character The left most column of the station name or press the Press the with the method described in Recall the preset number to be inputted name A will be displayed in the following order: remote, alphabetic and numeric characters more than 3 seconds. preset station. 7 INPUT SELECTOR → / LIP.SYNC → AV SURROUND RECEIVER SR7500 B OK THX 0 8 (Blank) → MUTE C ... Z MEMO VOL

MEMORY 9 4. MEMO DISP SLEEP

← MULTI

AUTO →

5. 5. DIRECT SURR AUTO 2. 5. 6. → TUNED A DOWN UP ST DISC 6.1 SPKR A B 1 ENTER MTX 6.1MTX V-OFF

button on the remote for

button on the front panel NIGHT 5. PEAK → → ATT EQ or DIGITAL AAC ANALOG 2 PCM or LSSR S SL DIGITAL SURROUND L LFE C R →

USE cursor 2. 3 ..... 0

buttons on the

PAGE

SOURCE 5. 2 “

Recalling IIA IE R L VIDEO DIGITAL DOWN

6.

buttons on S-VIDEO → AUX 1 INPUT VOLUME D5 D5 D4 D3 D2 D1 M

–

AUDIO

UP →

4. 4. 4. ”

a

+

Note:

6. 5. e epdPress, press again, etc. Ten keypad • blanks. Unused columns should be filled by entering seconds. MEMO button on the remote for more than 2 ENTER To save the name, press press button, or press the entered, press the After selecting the first character to be characters, press the To move back and forth between the same way. column starts to flash. Fill the next The entry in this column is fixed and the next remote. 9Y8V7S 6P 5M 4J 3G 2D 1A 0 CH+ button on the front panel, or press Ð or

→ → → → → → → → → → CH K + Z W T Q B E H N → → → → → → → → → → – button on the remote. / L space U C F R I O X → → → → → → → → →

MEMORY 0 MEMO 4 3 7 2 1 6 / 8 5 → → → → → → → → → 9 J G

S D A P V cursor M → button on the Y MEMORY or

buttons or ENTER or PTY AUTO SEARCH RDS OPERATION NUMBER DISPLAY PROGRAMME TYPE Your receiver is equipped to automatically search Now in use in many countries, RDS (Radio Data 1 POP Pop Music for stations transmitting any of 29 different 2 ROCK Rock Music System) is a description of the station’s programme types. To search for a PTY, follow programming hidden space in the FM signal. 3 MOR M. O. R. Music these procedures: 4 LIGHT Light classical

Your new receiver is equipped with RDS to assist ENGLISH 5 CLASSIC Serious classical in the selection of FM stations using station and M 6 NEWS News network names, rather than broadcast D1 2. 7 AFFAIR Current Affairs frequencies. Additional RDS functions include the D2 1. ability to search for programme types. D3 3. 8 INFO Information D4 9 SPORT Sport

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND USE PAGE 23 DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL L C R 10 EDUCATE Education AAC LFE 4. PCM SL S SR RADIO TEXT DOWN D5 D5 11 DRAMA Drama MENU EXIT Some RDS stations broadcast RADIO TEXT, TEST CH.SEL SURR 12 CULTURE Culture 1 2 3 ENTER 13 SCIENCE Science which is additional information on the station and 7.1CH SPK-AB DIGITAL S-VID ATT programme being broadcast. 4 5 6 14 OTHERS Varied DISP OSD SLEEP 2. RADIO TEXT information appears as ‘running’ text 7 8 9 15 OTHER Other Music THX in the display. RADIO TEXT is transmitted CLEAR 0 MEMO 16 WEATHER Weather character by the radio station. As a result of that it 17 FINANCE Finance may take some time until the entire text has been 18 CHILDREN Children’s programmes completely received. 1. Press the PTY button in the TUNER MODE on 19 SOCIAL Social Affairs the remote controller. The current station’s 20 RELIGION Religion RDS DISPLAY PTY will be displayed, or the currently 21 PHONE IN Phone In selected PTY group will be displayed in 22 TRAVEL Travel When a receiver is tuned to an FM station that is blinking if no station or RDS data is present. 23 HOBBIES Hobbies transmitting RDS data, the Front Panel Information 2. To change to a new PTY type, press the 24 JAZZ Jazz Music Display will automatically show the station name or 25 COUNTRY Country Music TUNING or button on the front panel or RDS TEXT in place of the typical display of the 26 NATION National Music station’s broadcast frequency. numeric buttons on the remote until the 27 OLDIES Oldies Music To change the display, press the TUNER button desired PTY is shown in the display. 28 FOLK Folk Music and press the the > button until PAGE3 is 3. Once the desired PTY group or type has been 29 DOCUMENT Documentary displayed. Press the DISP (D1) button. selected, press the PTY button while the M display blink (approx. 5 seconds). The PTY D1 Auto search will start, and the tuner will pause TV DVD VCR DSS D2 at each station broadcasting RDS PTY TUNER CD CD-R MD D3 information corresponding to the selected TAPE AUX1 AUX2 AMP D4

LIGHT USE PAGE 23 choice. 12 D5 RC8500SR Learning Remote Controller D5 4. To advance to the next RDS station with the

CH VOL desired PTY, press the PTY button again within 5 seconds. PROGRAMME TYPE (PTY) DISPLAY The RDS system categorizes programmes according to their genre into different programme type (PTY) groups. To display the programme type information of the current station, press the TUNER button and press the the > button until PAGE3 is displayed. Press the PTY (D2) button.

M

D1

D2 TV DVD VCR DSS

D3 TUNER CD CD-R MD

D4 TAPE AUX1 AUX2 AMP

USE PAGE 23 LIGHT 12 D5 RC8500SR Learning Remote Controller D5

CH VOL

PS (Program Service Name)RT (RADIO TEXT) Frequency

35 ENGLISH 2. In this time, you can select the input source by Notes for Multi Room Speaker MUL T I ROOM MULTI ROOM turning the input selector knob. • MULTI ROOM SPEAKER On/ Off is available in VIDEO : VCR1 Then, the display indicates “MULTI VOLUME” main room only. AUDIO : FM 102.00 SYSTEM “MULTI VOL. xx” for approx. 5 seconds. • MULTI ROOM SPEAKER output terminals can SLEEP TIMER : 90 min 3. During this time, you can set the volume level be used when the SURROUND BACK SPEAKER The Multi Room system is a function which allows in the multi room as desired. is set NONE in SPEAKER SETUP menu. (See MU L T I : OF F MS PKR : OF F SPEAKER SETUP, page 19) VOL : VAR I VOL : VAR I you to listen to the same or a different source in a This will only set the volume in the second LEVEL : - 90dB LEVEL : - 90dB room other than the room in which the SR7500 is room. • “The Surr. Back Speakers are in use” is displayed located. by pressing the MULTI SPEAKER button when ----MAIN-ROOMSTATUS---- To use this function, a multi room remote unit and the SURROUND BACK SPEAKER is set except V I DEO: DVD AUD I O : DVD remote control signal receiver available from your NONE in SPEAKER SETUP menu. (See MA I N E X I T SPEAKER SETUP, page 19) Marantz dealer are necessary. MULTI ROOM PLAYBACK USING 2. Press the VOL + or VOL – button on the multi The operations possible with the multi room • The multi speaker feature cannot be used at the THE MULTI SPEAKER TERMINALS room remote control to set the desired function are explained briefly below. same time as the SPEAKER C feature. When For details, refer to the instruction manual supplied The SR7500 allows you to connect another set of connecting for multi room use, set the SPEAKER volume. with the multi room remote control unit and receiver. speakers and place them in a different room or C selector switch on the rear panel to OFF. 3. In multi room mode, the multi room remote separated area for listening to music. • The multi speaker system cannot be used in the control can be used in the multiroom to When the outputs of the MULTI OUT terminals are Operation to MULTI ROOM SPEAKER without the 7.1 input channel mode. operate the following functions. remote controller. wired and connected to amplifiers installed in General: other rooms or MULTI SPEAKER OUT terminals are wired and connected to L&R speakers in other 2. 1. Controlling volume level, sleep timer, and OPERATION OF THE MULTI ROOM muting. Selecting input audio and video source room, different sources can be played in rooms AV SURROUND RECEIVER SR7500

other than the main room in which this unit and the INPUT SELECTOR VOLUME OUTPUTS WITH THE REMOTE Tuner:

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL playback devices are installed. SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL L C R LFE Selecting band, controlling preset channel up and AAC PCM CONTROL FROM A SECOND ROOM SL S SR DOWN down, tuning up and down, direct frequency call.

SR7500 has some feature to MULTI ROOM M 1. CH VOL Notes for the Multi Room System SYSTEM as source selector, OSD information, D1 STANDBY ENTER AUX 1 INPUT POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO L sleep timer, Multi Room Speaker output and D2 • The MULTI ROOM OUT (MULTI OUT/MULTI 2. SPEAKER) has analog outputs. remote control. D3 OK D4 2. This does not support digital input signals. USE PAGE 4 D5 • If the Tuner (FM or AM) is active in the main 1. PREV MUTE D5 GUIDE MENU room, you can not control any function of the EXIT MULTI ROOM PLAYBACK USING 1. Press the MULTI SPEAKER button. The unit TEST CH.SEL SURR CH VOL tuner. enters multi room mode and the display THE MULTI ROOM OUT TERMINALS TUNER CD CD-R MD 1. In this case, You must listen to the same station as The SR7500 is equipped with audio pre-out indicates “SELECT SOURCE” and flashes the TAPE AUX1 AUX2 AMP the main room. LIGHT terminals for which the volume is adjustable and “MULTI” indicators for approx. 10 seconds. 12 RC1400 composite video output terminals as the MULTI 2. In this time, you can select the input source by Learning Remote Controller ROOM output terminals. tuning the input selector knob. A separately sold stereo power amplifier can be 3. Then, the display indicates “MSPKR VOLUME” 1. Press MULTI on the multi room remote control connected to enjoy multi room playback. “MSPKR VOL.–xx” for approx. 5 seconds. from the MULTI ROOM. Operation to MULTI ROOM OUT without the During this time, you can set the volume level remote controller. (Press the AMP button and press the > button in the multi room as desired. until PAGE4 is displayed. Press the MULTI 2. 1. This will only set the volume in the multi room. (D1) button.)

AV SURROUND RECEIVER SR7500 This operations will put the SR7500 into multi INPUT SELECTOR VOLUME room mode and “MULTI” will be illuminated on

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL L C R the display. LFE AAC PCM SL S SR DOWN MULTI ROOM Video output will show OSD information for the MULTI ROOM setup.

STANDBY ENTER AUX 1 INPUT POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO L

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELECT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds. 36 REMOTE CONTROLLER OPERATION CONTROLLING MARANTZ COMPONENTS Press the desired function button. 1. ENGLISH ¥ The selected function name and USE are displayed in the LCD.

2. Press the desired operation buttons to play the selected component. ENGLISH ¥ For details, refer to the component’s user guide. ¥ It may not be possible to operate some models.

CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) CONTROLLING A MARANTZ CD PLAYER (CD MODE) CONTROLLING A MARANTZ VCR (VCR MODE)

SOURCE ON/OFF Turns the DVD player on and off SOURCE ON/OFF Turns the CD player on and off SOURCE ON/OFF Turns the VCR on and off

POWER POWER POWER OFF ON/OFF ON POWER ON Turns the DVD player on OFF ON/OFF ON POWER ON Turns the CD player on OFF ON/OFF ON D1 - D5 / >(Page) (Refer to page vi)

SOURCE POWER OFF Turns the DVD player off SOURCE POWER OFF Turns the CD player off SOURCE MENU Call up the menu M M M

D1 D1 - D5 / >(Page) (Refer to page vi) D1 D1 - D5 / >(Page) (Refer to page vi) D1 EXIT Exits the programming menu

D2 D2 D2 D2 Cursor/OK Move the cursor, enters the setting D2 MENU Switches the display information D2 0-9 Input the numeric D3 D3 D3 2 D4 MENU Calls up the menu of DVD disc D4 0-9 Input the numeric D4 Play D3 D3 D3 USE PAGE 1 USE PAGE 1 USE PAGE 1 4 ¢ D5 0-9 Input the numeric D5 MEMO Programs D5 / Skip forward or previous track D4 D4 D4 D5 D5 D5 MEMO Call up the programming menu CLEAR Clears the inputting 9 Stop CH VOLD5 CH VOLD5 CH VOLD5 CLEAR Clears the inputting 2 Play ; Pause

OK 2 Play OK 4 / ¢ Skip forward or previous track OK 0 Record

4 / ¢ Skip forward or previous chapter/track 9 Stop

LIP.SYNC LIP.SYNC LIP.SYNC PREV MUTE 9 PREV MUTE ; Pause PREV MUTE GUIDE Stop GUIDE GUIDE

MENUMENU EXIT MENUMENU EXIT MENUMENU EXIT TEST CH.SEL SURR ; Pause TEST CH.SEL SURR TEST CH.SEL SURR 1 2 3 1 2 3 1 2 3

7.1CH ATT SPK-AB 7.1CH ATT SPK-AB 7.1CH ATT SPK-AB 4 5 6 4 5 6 4 5 6

DISP OSD SLEEP DISP OSD SLEEP DISP OSD SLEEP 7 8 9 7 8 9 7 8 9 THX THX THX CLEAR 0 MEMO CLEAR 0 MEMO CLEAR 0 MEMO

TV DVDDVD VCR DSS TV DVD VCR DSS TV DVD VCR DSS

TUNER CD CD-R MD TUNER CD CD-R MD TUNER CD CD-R MD

TAPE AUX1 AUX2 AMP TAPE AUX1 AUX2 AMP TAPE AUX1 AUX2 AMP

LIGHT LIGHT LIGHT 12 12 12

RC8500SR RC8500SR RC8500SR Learning Remote Controller Learning Remote Controller Learning Remote Controller

37 ENGLISH

CONTROLLING A MARANTZ CD RECORDER (CDR MODE) CONTROLLING A MARANTZ MD DECK (MD MODE) CONTROLLING A MARANTZ TAPE DECK (TAPE MODE)

SOURCE ON/OFF Turns the CD recorder on and off SOURCE ON/OFF Turns the MD deck on and off SOURCE ON/OFF Turns the TAPE deck on and off

POWER POWER POWER OFF ON/OFF ON POWER ON Turns the CD recorder on OFF ON/OFF ON POWER ON Turns the MD deck on OFF ON/OFF ON POWER ON Turns the TAPE deck on

SOURCE POWER OFF Turns the CD recorder off SOURCE POWER OFF Turns the MD deck off SOURCE POWER OFF Turns the TAPE deck off M M M

D1 D1 - D5 / >(Page) (Refer to page vi) D1 D1 - D5 / >(Page) (Refer to page vi) D1 D1 - D5 / >(Page) (Refer to page vi) D2 D2 MENU Switches the display information D2 D2 MENU Switches the display information D2 D2 0-9 Input the numeric D3 D3 D3

D4 0-9 Input the numeric D4 0-9 Input the numeric D4 MEMO Programs D3 D3 D3

USE USE PAGE 1 USE PAGE 1 MEMO Programs PAGE 1 D5 MEMO Programs D5 D5 CLEAR Clears the inputting D4 D4 D4 D5 D5 D5 CLEAR Clears the inputting CLEAR Clears the inputting 2 Play CH VOLD5 CH VOLD5 CH VOLD5 2 Play 2 Play 4 / ¢ Skip forward or previous track 4 ¢ OK 4 / ¢ Skip forward or previous track OK / Skip forward or previous track OK 9 Stop

9 Stop 9 Stop ; Pause

LIP.SYNC LIP.SYNC LIP.SYNC PREV MUTE ; PREV MUTE ; Pause PREV MUTE 0 Record GUIDE Pause GUIDE GUIDE

MENUMENU EXIT MENUMENU EXIT MENU EXIT TEST CH.SEL SURR 0 Record TEST CH.SEL SURR 0 Record TEST CH.SEL SURR 1 2 3 1 2 3 1 2 3

7.1CH ATT SPK-AB 7.1CH ATT SPK-AB 7.1CH ATT SPK-AB 4 5 6 4 5 6 4 5 6

DISP OSD SLEEP DISP OSD SLEEP DISP OSD SLEEP 7 8 9 7 8 9 7 8 9 THX THX THX CLEAR 0 MEMO CLEAR 0 MEMO CLEAR 0 MEMO

TV DVD VCR DSS TV DVD VCR DSS TV DVD VCR DSS

TUNER CD CD-R MD TUNER CD CD-R MD TUNER CD CD-R MD

TAPE AUX1 AUX2 AMP TAPE AUX1 AUX2 AMP TAPE AUX1 AUX2 AMP

LIGHT LIGHT LIGHT 12 12 12

RC8500SR RC8500SR RC8500SR Learning Remote Controller Learning Remote Controller Learning Remote Controller

38 BASIC OPERATION See the attached manufacturer number list for the 1. View the supplied manufacturer number list, This example shows how to set a DVD player. preset manufacturers, devices, preset numbers, and find the number of the manufacturer for 45 7 USE MODE and other settings. the device that you are using. 2. Hold down the M button for three seconds or (Normal operation status) Remote control Corresponding Device name source name preset code more. LEARN LEARN LEARN

This remote control is preset with a total of 12 ENGLISH types of remote codes, including Marantz TV TV TV Television The menu is displayed. DVD DVD DVD player (television), DVD, VCR (VCR deck), DSS (satellite 3. Press the D1 (PRESET) direct button.

VCR VCR Video deck ENGLISH 12 12 12 broadcasting tuner), TUNER, CD, CD-R, MD, DSS SATELLITE Satellite broadcasting The Preset setting (P-SET) is displayed. TAPE (tape deck), AUX1, AUX2, and AMP tuner equipment 4. Press the DVD source button. (amplifier). TUNER RECEIVER/TUNERAM FM TUNER 5. Press the numeric buttons to enter the four- Learning is not necessary for Marantz products. CD CD/CD-R PLAYER CD player digit manufacturer number. 1. Turn on the power of the DVD player. You can use these products without setting any CD-R CD/CD-R PLAYER CD recorder 2. Hold down the M button for three seconds or codes. Example: To enter “0600” from the manufacturer MD CD/CD-R PLAYER MD deck number list. more. TAPE TAPE Cassette deck To correct the entered number, use the or The menu is displayed. AUX1 CABLE Cable television 1. Press the SOURCE button. cursor button to enter the correct number. Press the D1 (PRESET) direct button. AUX2 LASER DISC Laser disc player 3. For this example, press DVD. ¥ If no button is pressed for over one minute The Preset setting (P-SET) is displayed. DVD is shown on the LCD, and the remote control is AMP AMPLIFIER Amplifier or receiver RECEIVER/TUNER during the setting process, any settings 4. Press the DVD source button. set for DVD. that were made are cancelled. Pressing the source button once changes the remote 5. Hold down the CH+ or CH– button for one ¥ When using Marantz products, TV and DVD can 6. Press the OK cursor button. second or more. control to the settings for the source that was be set to TV1 (TV/VDP: Projector) and TV2 pressed. 7. Confirm the OK is displayed and then the (PDP: Plasma display), and DVD1 (first DVD 6. Press the CH+ button repeatedly in the To change the amplifier or other source, press the player) and DVD2 (second DVD player), display returns to the Preset Setting (P-SET). interval for one second. SOURCE button twice (double-click). The code is respectively, to match the customer’s operating When the manufacturer number is entered correctly, The signal is transmitted, and the display cycles sent, and then the amplifier source changes to DVD. environment. These settings are made in OK is displayed momentarily on the screen. through the code number. 2. Press the buttons to operate the DVD. PRESET mode. ¥ If you enter a number not in the Press the CH– button to go back to a number screen. The indicator is shown on the LCD while the manufacturer number list, WRONG CODE In the factory default state, the remote control is 7. Release the button once the DVD player turns remote control codes are being transmitted. It is not is displayed, and then you return to the off. displayed when buttons without stored code are set to TV1 and DVD1. To make the presets, preset setting again pressed. enter the numbers below while referring to the 8. Press the OK cursor button. Check the manufacturer number list, and 3. The direct buttons can be used to perform up section “Entering and Setting the Manufacturer 9. Confirm the OK is displayed and then the Number Directly”. either set a different number or use the display returns to the Preset Setting (P-SET). to 20 operations for each of the 12 sources, sequence function to set. including DVD, TV, AMP, and other AV TV1: 0001, TV2: 0002 10. To set the manufacturer number for another 8. To set the manufacturer number for another equipment. DVD1: 0001, DVD2: 0002 source device, repeat the procedure in steps 4 source device, repeat the procedure in steps 4 The buttons consist of the D1 to D5 buttons, and the to 8. to 6. equipment is operated by pressing the buttons 11. After the settings are completed, press the M Entering and Setting the Manufacturer NumberAfter the settings are completed, press the M corresponding to the indicators on the LCD. Directly 9. button. Four pages are available, and press the > button to button. 12. Press the buttons on the remote control to select a page. The current page position is displayed Refer to the manufacturer number list. 10. Press the buttons on the remote control to check that the DVD can be operated correctly. on the LCD. This example shows how to set a SAMSUNG DVD check that the DVD can be operated correctly. player. Check the following points if the equipment which 23 4 Setting Equipment Not Appearing in Manufacturerwas set does not operate properly. PRESET MODE Number List ¥ If there is more than one number in the manufacturer number list, try setting a different (When operating non-Marantz AV equipment Use the sequence function to set equipment not appearing in the manufacturer number list. You number. products) LEARN LEARN This remote control is preset with remote control may still be unable to set some equipment even ¥ There may be some buttons which cannot be codes from AV equipment by other manufacturers. when using the sequence function. In this case, used. Program the codes to the required the remote control can be programmed with codes USE PAGE buttons. The preset codes are TV, VCR, LD, CABLE, DSS, 1 12 12 DVD, TAPE, TUNER, CD, CD-R, MD and AMP. individually. Settings can be made in one of two ways. 56 In the sequence function, the power ON/OFF When the preset codes are set, the following codes are transmitted by pressing the remote codes are contained in the source button of the control buttons in order. remote control. If the power for the equipment is left on, hold down LEARN LEARN the button until the equipment is turned off, and then release. This completes the setting.

12 12

39 ENGLISH LEARN MODE 6. Press and hold down the (PLAY) button of Programming the Direct Buttons and Rewriting 7. To change the name, press the numeric Programming the (PLAY) and Other Control the transmitting DVD remote control, and Names buttonsto enter the text. Buttons and Numeric Buttons check that OK is displayed on the LCD. This example shows how to program codes from • Use the cursor buttons to move to the This remote control is capable of learning and The remote control has finished learning when OK is other manufacturer products to the DVD MENU sections to be rewritten on the LCD. storing codes used by other remote controls that displayed on the LCD. button (D1) and change the display to OSD. • To change MENU to OSD, press the 5 you already own. If ERROR is displayed on the LCD, some error has 67 8 numeric button. prevented the command from being learned. If this For codes which are not learned, the remote happens, repeat the procedure for steps 4 and 5. Each time the button is pressed, the control will transmit either the Marantz preset → → → → In some rare cases, ERROR may be displayed display cycles through M N O 5 codes from the initial settings, or remote codes M. repeatedly during the learning operation. In this LEARN LEARN LEARN from another manufacturer’s AV equipment which case, the transmitting remote control may have 8. After rewriting of the text is completed, press is set by the customer. special signal codes. These codes cannot be The receiver sensor for the remote control signals is the OK cursor button. learned by this remote control. PAGE PAGE PAGE located at the top of the remote control. 12 12 12 To delete text that is already entered, press the 0 7. Follow the same procedure to make the button to insert a space. remote control learn the other buttons. This example shows how to learn the codes from 1. Hold down the M button for three seconds or • In this example, MENU is changed to the remote control of a DVD player. 8. Repeat the procedure in steps 3 to 6 to have more. “OSD (space) (space)” in this step, and the remote control learn the signal codes from The menu is displayed. then OSD is displayed in the right side by 12 4 a TV, CD player, or other AV equipment. 2. Press the D2 (LEARN) direct button. pressing the OK button. • When no buttons are pressed for The LEARN setting (LEARN) indicator is displayed. For details, refer to the section “Rewriting Names”. approximately one minute during the The LEARN indicator then blinks. 9. In the same way, use the > button to select the LEARN LEARN learning operation, the remote control 3. Press the DVD source button. page, and then press the direct button to automatically returns to USE mode. The first page of the direct button screen is program the codes. • When programming the source buttons, displayed. There are four available pages. Pressing 10. After programming the codes for each of the USE PAGE 1 PAGE 12 12 switch to the source in step 3, and then the > buttons cycles through the pages in this order 1 buttons, press the M button. → 2 → 3 → 4 → 1. press the source button again. The USE indicator displays on the LCD, and the Press the D1 (MENU) direct button. 6 (When OK) (failed) (codes are full) 9. When you have finished programming the 4. newly stored codes can be transmitted. LEARN codes for each button, press the M button. The indicator blinks, and then displays to indicate that learning is ready. The USE indicator is displayed on the LCD, and the REWRITING NAMES newly stored codes can be used. 5. Place the receiver sensor of the remote LEARN LEARN This remote control allows the rewriting of names • If FULL is displayed on the LCD, the control (top) so that it is facing the transmitter of the DVD remote control (top) at a distance for the sources and direct buttons. This operation memory cannot hold any more learned is performed for each individual source. codes in LEARN mode. of about 5 cm (2 inches). PAGE 12 PAGE 12 12 This example shows how to change the source If FULL is displayed no matter how many 6. Press and hold down the OSD button of the name from DVD to AVD and AUDIO to SOUND. times you try the learning operation, the transmitting DVD remote control, and check 1. Hold down the M button for three seconds or remote control cannot accept any more that OK is displayed on the LCD. 34 5 more. new codes until some of the previously The remote control has finished learning when OK is The menu is displayed. learned codes are deleted from the displayed on the LCD. 2. Press the D2 (LEARN) direct button. memory. Delete some of the learned If ERROR is displayed on the LCD, some error has NAME The LEARN setting (LEARN) is displayed. The LEARN buttons from the sources. prevented the command from being learned. If this NAME NAME indicator then blinks. happens, repeat the procedure for steps 4 and 5. 3. Press the DVD source button. The M button and > button cannot be taught. Only • After learning is completed, the remote PAGE 12 PAGE 12 PAGE 12 control automatically switches to name 4. Press the (PLAY) button. each one code can be learned for the LIGHT buttons 1 and 2, regardless of the source. rewriting mode. The left end “ ” indicator 78 9 The LEARN indicator blinks, and then displays to on the MENU blinks to indicate that the indicate that learning is ready. blinking part can be rewritten. 5. Place the receiver sensor of the remote • If no names will be rewritten, press the OK control (top) so that it is facing the transmitter

cursor button. The display returns to NAME NAME NAME of the DVD remote control (top) at a distance learning standby mode by pressing the OK of about 5 cm (2 inches). cursor button. PAGE 12 PAGE 12 PAGE 12

1. Hold down the M button for three seconds or more. The menu is displayed. 2. Press the D3 (NAME) direct button .

40

SR7500N DFU_01_ENG 3_3 Page 40 04.9.29, 0:55 PM Adobe PageMaker 6.5J/PPC 3. Press the DVD source button . ERASING PROGRAMMED CODES 6. Press the AMP source button . 6. Press the D4 (YES) direct button to erase. The NAME indicator blinks. (RETURNING TO INITIAL SETTINGS) 7. Press the > button to display the first page for All codes and names programmed to page 2 are The “ ” blinks to indicate that the letter can be Codes can be erased in five ways: by buttons, AMP. erased. When the codes are cleared, the codes for changed. direct buttons, direct button pages, sources, and 8. Press the D1 (AUTO) direct button to be this button reset to the factory default code or 4. Press the cursor button twice. by all memory contents. become blank. Any rewritten names return to the erased while holding down the CLEAR button original name. The D in DVD blinks to indicate that the letter can be . ENGLISH changed. Erasing Buttons and Erasing Direct Buttons ¥ To cancel the erasing operation, press the 9. Press the D4 (YES) direct button to erase. D5 (NO) button to return to the previous

5. Press the 1 numeric button to select A. ENGLISH This example shows how to erase the code The code programmed to the AUTO button is screen. Each time the numeric buttons are pressed, the learned from the PLAY button of the DVD player erased. button cycles through the alphanumeric characters 7. When the erasing operation is finished, press and the AUTO code of the AMP direct button. When the code is cleared, the code for this button shown below. the M button . resets to the factory default code or becomes blank. 1: A → B → C → 1 → A Erasing buttons USE The rewritten name returns to the original name. The indicator lights up to indicate that the 2: D → E → F → 2 → D remote control can now be operated. 134 ¥ To cancel the erasing operation, press the 3: G → H → I → 3 → G D5 (NO) button to return to the previous → → → → Erasing Sources 4: J K L 4 J screen. 5: M → N → O → 5 → M This procedure clears all codes and names LEARN LEARN 10. When the erasing operation is finished, press 6: P → Q → R → 6 → P programmed to the DVD, TV, or other sources. All the M button . 7: S → T → U → 7 → S codes and names in the four direct button pages 8: V → W → X → 8 → V The USE indicator displays to indicate that the USE USE USE PAGE are also erased. PAGE 1 PAGE 12 12 9: Y → Z → / → 9 → Y remote control can now be operated. This example shows how to erase the names and 0: SPACE ( ) → + → — → , → ’ → < → > → ? → 0 → Hold down the M button for three seconds or codes learned from the DVD player. SPACE ( ) 1. Erasing Direct Button Pages 134 6. Press the or cursor button . more. This example shows how to erase the entire direct The menu is displayed. The letter is changed to “A”. button second page learned from the DVD player. 2. Press the D5 (ERASE) direct button . ¥ The and cursor buttons can be used to 134 move the blinking indicator of the section 3. Press the DVD source button . LEARN LEARN to be rewritten. The USE and LEARN indicators blink. 7. Press the or cursor buttons to select 4. Press the button (PLAY) that you want to USE USE LEARN LEARN PAGE 1 PAGE 12 USE PAGE 12 AUDIO on the direct button indicator. The A erase while holding down the CLEAR button . flashes to indicate that the name can be A message is displayed on the LCD. Press the D4 (YES) direct button to erase. 1. Hold down the M button for three seconds or 5. USE USE USE changed. PAGE 1 PAGE 12 PAGE 12 more. Press the 7 numeric button to select S. The code programmed to the (PLAY) button is 8. erased. The menu is displayed. Each time the button is pressed, the button cycles 5 When the code is cleared, the code for this button 2. Press the D5 (ERASE) direct button . through S → T → U → 7 → S. resets to the factory default code or becomes blank. 3. Press the DVD source button . 9. Press the cursor button to move the flashing ¥ To cancel the erasing operation, press the The USE and LEARN indicators blink. section. D5 (NO) button to return to the previous LEARN 4. Press the DVD source button while holding Press the 5 numeric button to select O. 10. display. down the CLEAR button . 11. Follow the same procedure to enter U, N, and To erase codes programmed for the 5. Press the D4 (YES) direct button to erase. D. USE PAGE 12 CLEAR button, simply press the CLEAR All codes and names programmed to the DVD 12. When finished entering the text, press the OK button twice. source are erased. When the codes are cleared, the cursor button . To erase codes programmed for the 1. Hold down the M button for three seconds or codes for this button reset to the factory default code 13. Press the M button . SOURCE button, simply press the more. or become blank. Any rewritten names return to the The USE indicator displays on the LCD, and the SOURCE button twice. The menu is displayed. original name. newly stored codes can be used. 2. Press the D5 (ERASE) direct button . ¥ To cancel the erasing operation, press the The input is overwritten, and so the currently D5 (NO) button to return to the previous Erasing direct buttons 3. Press the DVD source button . displayed text is erased. display. The USE and LEARN indicators blink. Up to six characters can be entered for the direct 689 Press the > button to display the second page. 6. When the erasing operation is finished, press button indicator. 4. 5. Press the > button while holding down the the M button . USE CLEAR button . The indicator displays to indicate that the

LEARN LEARN LEARN remote control can now be operated.

USE USE PAGE PAGE 12 12 USE PAGE 12

41 ENGLISH Erasing All Note: 4. Press the buttons in the sequence that you EXECUTING MACRO PROGRAMS This procedure clears (resets) all programmed • If the signal transmission interval (interval time) want the operations performed. 12 3 codes and names. Once all the data is cleared, the is changed using the Setup mode (described later), The actual program starts here. memory is returned to the factory default status. this transmission interval is applied to all macro Each time a button is pressed, the name of the The programmed macros are also erased. programs. To change individual signal button is displayed on the LCD. transmission intervals, use the procedures in this 134 4-1 4-2 4-3

MACRO section for programming macros and revising MACRO MACRO macros. ¥ No signals are transmitted while programming a PAGE 12 PAGE 12 PAGE 12

LEARN LEARN macro. LEARN LEARN LEARN

¥ The M button, > button, cursor buttons, MEMO MACRO MACRO MACRO 1. Press the M button shortly. button, CLEAR button, and VOL buttons cannot The macro menu is displayed. USE USE USE PAGE 12 PAGE 1 PAGE 12 be programmed. PAGE 12 PAGE 12 PAGE 12 2. Press the D1 (M-01) direct button . ¥ If no button is pressed for approximately one 3. Check that the operations of the program are Hold down the M button for three seconds or 1. minute during programming, the remote control 4-1. Press the DVD source button . executed step by step. more. returns to the state before macro mode. 4-2. Press the (PLAY) button . The name of the operation button is displayed on the The menu is displayed. In this case, the macro program is not stored. 4-3. Press the or cursor buttons . LCD. 2. Press the D5 (ERASE) direct button . & ¥ When executing macro mode, performing the The interval time is displayed on the LCD. ¥ The programmed section is indicated by . The USE and LEARN indicators blink. source switching operation two or more times 4-4. Press the or cursor buttons and set to 2.0 The bar indicator moves to indicate the Press the CLEAR button while holding down 3. only changes the remote control mode and does (seconds). progress of the program. the POWER ON and OFF buttons at the same not transmit any signals. (Switching of the ¥ Use the cursor button to increase the Select DVD source → PLAY transmit → Interval time. source selector of the amplifier is valid only time and the button to decrease the time: 2 seconds → Select TV → TV INPUT transmit → → → 4. Press the D4 (YES) direct button to erase. once.) time. The interval time can be set from 0.5 Select AMP AUTO transmit End All programmed codes and names are erased and seconds to 5 seconds. ¥ To cancel transmission of the program reset to the factory default settings. while it is in progress, press any button. PROGRAMMING MACROS ¥ To stop the time adjustment, press the D5 ¥ To cancel the erasing operation, press the (CANCEL) direct button. D5 (NO) button to return to the previous This example shows how to program a macro to CHANGING NAMES OF MACRO PROGRAMS screen. the M-01 button. 4-5. Press the OK cursor button . -6 Press the TV source button . Under the factory default settings, the names of the ¥ To erase all operation takes a few seconds (The screens shown in the example are the default 4 . factory states. If the names of direct buttons were 4-7. Press the > button to display the first page. macro programs are set from M-01 to M-20, but you after the D4 (YES) button is pressed. can change them to any desired name. rewritten, these modified names would be -8 Press the D1 (INPUT) direct button . 4 . The text can have up to six characters, and it is displayed.) 4-9. Press the AMP source button . Switch amplifier to DVD source → Play DVD player entered using the numeric buttons. 4-10.Press the > button to display the first page. This example shows how to change the M-01 PROGRAMMING MACROS → Set the interval to 2 seconds until the next signal is sent → Switch TV to video input → Set the 4-11.Press the D1 (AUTO) direct button . name to MOVIE. This remote control can program a series of button amplifier mode to AUTO 4-12.Press the OK cursor button . 12 3 operations in sequence. 12 3 The LCD displays END to indicate that programming Macros are a function that makes it possible to use is completed. a single button operation to perform a complex 5. To program another macro, repeat the

LEARN series of button operations any number of times. A procedure in steps 3 to 4-12. LEARN

single button can be programmed to perform up to LEARN LEARN MACRO 6. To exit macro programming, press the M MACRO

MACRO 20 steps in sequence. A total of 20 buttons can be MACRO button . programmed with macros. USE PAGE 1 PAGE 12 PAGE 12 USE PAGE The indicator displays to indicate that the USE PAGE 1 PAGE 12 12 ¥ For example, the following sequence of remote control can now be operated. 45 6 operations can be programmed to a macro. When the macro are programmed 20 operations or Switch amplifier to DVD source → Set amplifier 1. Hold down the M button for three seconds or more, the display returns macro menu. mode to AUTO → Play DVD player → Switch TV more. Edit the macro so that it has 20 operations or less. to video input The menu is displayed.

NAME NAME NAME

Press the D4 (MACRO) direct button . MACRO MACRO The factory default for the transmission interval 2. MACRO (time) between macro operations is one second, The macro menu is displayed. but these signal transmission intervals can be set The MACRO indicator displays and LEARN blinks. PAGE 12 PAGE 12 PAGE 12 between approximately 0.5 seconds and 5 3. Press the D1 (M-01) direct button . seconds in the Setup mode. Each transmission The menu has four pages, and so use the > button to 1. Hold down the M button for three seconds or interval can be adjusted independently when select the page when programming other buttons. more. programming or revising a macro. The menu is displayed.

42 2. Press the D4 (MACRO) direct button. 2. Press the D4 (MACRO) direct button. 7. Press the D1 (INPUT) direct button. CLEARING MACRO PROGRAMS The macro menu is displayed. The macro menu is displayed. INPUT blinks for 0.5 seconds. When clearing macros, the macros programmed to The MACRO indicator displays and LEARN blinks. The MACRO indicator displays and LEARN blinks. TV and INPUT are overwritten. the button are erased. Modified macro names are 3. Press the D1 (M-01) direct button . 3. Press the D1 (M-01) direct button. ¥ To check the modified steps, press the also returned to the factory default settings. This The NAME is displayed. 4. Press the D5 (EDIT) direct button. or cursor button. example shows how to clear a macro with the 4. Press the D3 (NAME) direct button . The LCD displays DVD, and the step position is 8. To exit, press the M button. name MOVIE programmed to M-02. ENGLISH The “ ” blinks to indicate that rewriting is possible. indicated by 7. When finished, to change another macro program, 145

5. Press the 5 numeric button to select M. The programmed section is indicated by &. press the OK cursor button to return to the menu, ENGLISH 6. Press the cursor button to next. 5. Press the cursor button to display TV. and then repeat the procedure for steps 3 to 8. The “ ” blinks to indicate that rewriting is possible. 6. Press the CLEAR button . LEARN LEARN Press the 5 numeric button to select O. The LCD displays CLEAR, and TV and INPUT are INSERTING STEPS IN MACRO PROGRAMS 7. MACRO MACRO MACRO 8. Repeat steps 6 and 7, and then enter V, I, E deleted. This example shows how to change the macro When deleting steps from a macro program, the and “ (space)”. programmed to M-01 from PAGE 12 PAGE 12 PAGE 12 operations performed for a source after switching to DVD → PLAY → AMP → AUTO ¥ To make changes in the text while entering the source are also deleted. to it, use the or cursor buttons to move to 1. Press the M button for three second or more. If the CLEAR button is pressed at the INPUT DVD → PLAY → TV → INPUT → AMP → AUTO the blinking section. position, only the INPUT step is deleted. The macro menu is displayed. 46 8 9. After making the changes, press the OK The & indicator for the step is also changed. 2. Press the D4 (MACRO) direct button . cursor button. ¥ To check the modified steps, press the The macro menu is displayed. ¥ To change the names of other macro or cursor button. 3. Press the D2 (MOVIE) direct button while programs, repeat the procedure in steps 3 7. To exit, press the M button. LEARN LEARN LEARN holding down the CLEAR button. to 9. When finished, to change another macro program, MACRO MACRO MACRO 4. Press the D4 (YES) direct button to clear the 10. To exit, press the M button. press the OK cursor button to return to the menu, macro. PAGE 12 PAGE 12 PAGE 12 and then repeat the procedure for steps 3 to 6. To cancel the clearing operation, press the NO (D5 button). ERASING STEPS OF MACRO PROGRAMS OVERWRITING STEPS IN MACRO PROGRAMS1. Hold down the M button for three seconds or 5. To exit, press the M button. This example shows how to delete the TV and more. This example shows how to change the macro When finished, to change another macro program, INPUT steps from the following macro The menu is displayed. press the OK cursor button to return to the menu, programmed to M-01. programmed to M-01 from → → → 2. Press the D4 (MACRO) direct button. and then repeat the procedure for steps 2 to 4. The program is changed from DVD PLAY AMP AUTO The macro menu is displayed. DVD → PLAY → TIME → TV → INPUT → AMP → to → → → The MACRO indicator displays and LEARN blinks. AUTO DVD PLAY TV INPUT. Press the D1 (M-01) direct button . to 46 7 3. DVD → PLAY → TIME → AMP → AUTO. 4. Press the D5 (EDIT) direct button . 12 3 The LCD displays DVD, and the step position is indicated by 7. LEARN LEARN LEARN The programmed section is indicated by &. MACRO MACRO MACRO 6. Press the cursor button so that AMP is

LEARN LEARN displayed. PAGE 12 PAGE 12 PAGE 12

MACRO MACRO 6. Press the MEMO button. 7. Press the TV source button. USE PAGE 1 PAGE 12 PAGE 12 1. Hold down the M button for three seconds or more. TV blinks for 0.5 seconds Press the D1 (INPUT) direct button. 45 6 The menu is displayed. 8. 2. Press the D4 (MACRO) direct button. INPUT blinks for 0.5 seconds. TV and INPUT are inserted. The macro menu is displayed. Press the OK cursor button. The MACRO indicator displays and LEARN blinks. 9.

NAME NAME NAME 3. Press the D1 (M-01) direct button. ¥ To check the modified steps, press the MACRO MACRO MACRO or cursor button. 4. Press the D5 (EDIT) direct button. To exit, press the M button. PAGE PAGE 10. PAGE 12 12 12 The LCD displays DVD, and the step position is indicated by 7. When finished, to change another macro program, press the OK cursor button to return to the menu, The programmed section is indicated by &. 1. Hold down the M button for three seconds or and then repeat the procedure for steps 3 to 9. Press the cursor button so that AMP is more. 5. displayed. The menu is displayed. 6. Press the TV source button. TV blinks for 0.5 seconds. 43 ENGLISH SETTING THE MACRO TIMER EXECUTING THE MACRO TIMER 1. Place the receiver sensor of the receiving COPYING BY SOURCE Setting the macro timer enables the macro The macro program starts when the time that was remote control (top) so that it is facing the The 12 sources can be copied on a source by program to automatically turn the power for a set is reached. The TIMER indicator lights up transmitter of the transmitting remote control source basis. You can select from up to 12 source device on or off or perform other operations. whenever the macro timer is activated. (top) at a distance of about 5 cm (2 inches). types. In the settings, you can select to execute the Note: 2. Hold down the M button of the transmitting macro timer everyday or only once. remote control for three seconds or more. Be sure to set the clock to the correct time before • To execute the macro timer, place the remote 67 8 The menu is displayed. using the timer. The macro timer can only be set control facing the infrared sensor of the device to be operated. If the remote control is not in a Press the > button to display the fourth page for one program a day. 3. suitable position, it may not operate the device CLONE menu. This example shows how to use the timer only properly. LEARN once at 20:35 to execute a macro programmed to 4. Press the D3 (TX) direct button. M-01. The transmitting side is now ready. 23 4 5. Hold down the M button of the receiving PAGE 1234 1234 PAGE 1234 CLONE MODE remote control for three seconds or more. The menu is displayed. 1. Place the receiver sensor of the receiving CREATING COPIES USING CLONE MODE 6. Press the > button to display the fourth page remote control (top) so that it is facing the LEARN LEARN All of the codes programmed to the RC8500SR CLONE menu. transmitter of the transmitting remote control MACRO MACRO remote control can be copied to another 7. Press the D1 (RX) direct button. (top) at a distance of about 5 cm (2 inches). RC8500SR using a few simple operations. USE PAGE The receiving side is now ready. 123 PAGE 12 123 2. Hold down the M button of the transmitting ¥ The remote control can copy the entire contents 8. Press the OK cursor button on the receiving remote control for three seconds or more. or the contents for specific source buttons. 56 remote control. The menu is displayed. ¥ When copying the entire contents, all 9. Press the OK cursor button on the 3. Press the > button to display the fourth page programmed codes, modified names, transmitting remote control. CLONE menu. programmed macros, and signal transmission When copying is started, the bar indicators on both LEARN LEARN 4. Press the D3 (TX) direct button. intervals are copied. LCDs start to move from the left to the right.

MACRO MACRO The transmitting side is now ready. When copying the contents for source buttons, the ¥ When the copying operation is completed, 5. Hold down the M button of the receiving

PAGE PAGE 123 programmed codes and modified names are 123 TX OK is displayed on the LCD of the remote control for three seconds or more. copied. transmitting remote control, and RX OK is 6. Press the > button to display the fourth page Note: displayed on the LCD of the receiving 1. Hold down the M button for three seconds or remote control. CLONE menu. more. • The clone function can only be used for copying Press the D2 (RX-S) direct button. ¥ Do not touch either of the remote controls 7. The menu is displayed. when using the same model (RC8500SR) for both the transmitting and receiving remote control. during the copying operation. Doing so 8. Press the source button to be copied. 2. Press the > button to display the third page could cause copying to fail. The receiving side is now ready. TIMER menu. The name of the source which was pressed is ¥ If the copying fails in the middle of the Press the D2 (ONCE?) direct button. COPYING ENTIRE CONTENTS displayed on the LCD. 3. copying process, RX ERROR is displayed The M-TMR menu is displayed on the LCD. on the receiving remote control. Check ¥ Each time the source button is pressed, ¥ To cancel timer operation, press CANCEL. 34 9 and perform steps 1 to 7 again. the name is displayed on the LCD. 4. Press the D1 (M-01) direct button . ¥ Copying takes about three minutes to 9. Press the OK cursor button on the receiving The time which is set previously is displayed. complete when the transmitting remote remote control. 5. Press the 2 and 0 numeric button to set the control has been programmed to 100% 10. Press the OK cursor button on the hour indicator to 20. capacity. transmitting remote control. 6. Press the 3 and 5 numeric button to set the 10. Once copying is completed, press the M When copying is started, the bar indicators on both minute indicator to 35. PAGE 1234 PAGE 1234 PAGE 1234 button on both remote controls. LCDs start to move from the left to the right. 7. Press the OK cursor button. ¥ When the copying operation is completed, This finalizes the time. TX OK is displayed on the LCD of the transmitting remote control, and RX OK is 8. To exit, press the M button. 56 9 To cancel the macro timer, return to the TIMER displayed on the LCD of the receiving menu and press the D5 (CANCEL) and then press remote control. D1 (M-01). ¥ Do not touch either of the remote controls during the copying operation. Doing so could cause copying to fail.

PAGE 1234 PAGE 1234 1234

44 ¥ If the copying fails in the middle of the 5. Press the OK cursor button to enter the ADJUSTING THE DISPLAY CONTRAST copying process, ERROR is displayed on lighting time. The contrast of the LCD can be adjusted. Adjust the remote control. 6. Once the setting is finished, press the M for maximum visibility according to your viewing Check and perform steps 1 to 7 again. button . environment. 11. Once copying is completed, press the M 23 4 button on both remote controls. SETTING THE MACRO INTERVAL TIME ENGLISH When a macro program is executed, control

ENGLISH

signals are transmitted in sequence. This LEARN LEARN SETUP transmission interval (interval time) can be set in 0.5-seconds units from 0.5 to 5 seconds. SETTING THE LIGHTING TIME If the interval time is set in this Setup mode, the PAGE 12 1234 1234 interval times for all programmed macros are ¥ The LCD lights up when the LIGHT buttons are changed. If necessary, use EDIT (see page 43) in pressed. The LCD remains lit while the pressed 1. Hold down the M button for three seconds or the macro program to change the individual more. button is held down, and it goes off when the transmission times. The menu is displayed. button is released. The factory default setting for the transmission ¥ The LCD continues to light up if another button interval is 1 second. 2. Press the > button to display the second page is pressed while it is lit or if pressed within two SETUP menu. seconds after the light goes off. This example shows how to set the interval time to 3. Press the D3 (CONT) direct button . ¥ The lighting time can be set in one-second units 5 seconds. 4. Press the or cursor button and set the from 0 to 60 seconds. 23 4 display contrast for maximum visibility. The LIGHT buttons have light-absorbing The adjustment has 10 levels. properties that enable them to store light. If the The factory default setting for the contrast is the fifth buttons are no longer illuminated in a dimly lit level. environment, bring the buttons near a fluorescent LEARN LEARN 5. Press the OK cursor button to enter the lamp or other light source for a sufficient amount of display contrast. time. This should illuminate the buttons again. Once the setting is finished, press the M PAGE 6. 12 1234 1234 ¥ The LIGHT buttons consist of a LIGHT1 and button. LIGHT2 button, and they both perform the same operation. 1. Hold down the M button for three seconds or more. The factory default lighting time is set to 15 The menu is displayed. seconds. 2. Press the > button to display the second page This example shows how to set the lighting time to SETUP menu. 20 seconds. 3. Press the D2 (I-TIME) direct button. 23 4 4. Press the or cursor button to set the interval time. Holding down the cursor button fast-forwards the time indicator. LEARN LEARN 5. Press the OK cursor button to enter the interval time.

PAGE Once the setting is finished, press the M 12 1234 1234 6. button. 1. Hold down the M button for three seconds or more. The menu is displayed. 2. Press the > button to display the second page SETUP menu. 3. Press the D1 (LIGHT) direct button . The LIGHT is displayed on the LCD 4. Press the or cursor button to set the lighting time.

45 ENGLISH TROUBLESHOOTING SYMPTOM Can not select EX/ES mode. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? CAUSE REMEDY 2. Are you operating the unit properly following the user’s guide ? Can not select Pro Logic Surround center= NONE has been Make the correct setting. selected in SPEAKERS SIZE SETUP 3. Are the power amplifiers and speaker working properly ? IIx mode. Input signal is incompatible. Use 5.1channel source. If the unit does not operate properly, check items shown in the following table. Can not select Neo:6 mode. Input signal is incompatible. Use 2 channel Dolby Digital input signal, PCM input signal or analog input signal. If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearestCan not select CS Input signal is incompatible. Use 2 channel Dolby Digital input signal, PCM input II mode. signal or analog input signal. Marantz authorized dealer or the Marantz Service Center in your country. Input signal is incompatible. Use 2 channel Dolby Digital input signal, PCM input No output to Subwoofer Out. signal or analog input signal. CAUSE Subwoofer = NONE has been selected Select Subwoofer = YES. The power plug is not connected. in SETUP mode. Noise is produced during DTS- Mute is on. encoded CD or laser disc play. Analog has been selected for input. Be sure to perform digital connection, select digital No sound and picture are REMEDY input, then play. output even when powerThe is on. input cable is not connected correctly. Connect the power plug to the outlet.A specific channel does not Nothing recorded on source. Check the encoded channel on the source side. produce output. SYMPTOM The master volume control is turned all Cancel mute using the remote control unit. the way down. FM or AM reception fails. Antenna connection is incomplete. Correctly connect the indoor FM and AM antennas SR7500 cannot be turned up. See the connection diagram and connect the to FM and AM antenna outlets. The function selector position is wrong. cables correctly. Noise is heard during AM Reception is affected by other electrical Try changing location where the AM indoor The headphones are connected to the Adjust the master volume. reception. fields. antenna is set up. headphone jack. Noise is heard during FM The radio waves from the broadcasting Install an FM outdoor antenna. No speaker output. Input cable connected incorrectly. Select correct position. reception. station are weak. Disconnect the headphones. (SpeakersCannot get will programmed not Preset data has been erased. Disconnecting power plug for long periods of time Incorrect Audio or Video for output sound when headphones arestation connected.) when the PRESET will erase preset data. If that happens, input the selected source. Speaker cable connected incorrectly. button is pressed. preset data again. Connect the cable correctly by referring to the connection diagram. Control with the remote Batteries are consumed. Replace all the batteries with new ones. The center speaker cable connection is control unit fails. incomplete. Remote controller's function-key Select different position from which equipment will Incorrect Audio from a channel. Connect the cable correctly by referring to the setting is wrong. be controlled. connection diagram. The distance between this SR7500 and Move closer to this SR7500. No Audio output from the Connect the cable correctly. the remote commander is too far. center channel speaker. Something is blocking SR7500 and the Remove offending object. When STEREO is selected for Surround mode, no remote commander. STEREO has been selected for Surround sound will be output from the center speaker. Set mode. another Surround mode. MRAC is not working. Headphones are connected. Disconnect the headphones. Make the correct setting. Center = NONE has been selected in No Audio output from the SETUP mode. Connect the cable correctly. surround speakers. The surround speaker cable connection is incomplete. When STEREO has been selected for Surround mode, no sound will be output from the surround speaker. Set another Surround mode.Note: STEREO has been selected for Surround mode. Make the correct setting. • After “PROTECT” appears on the unit’s display, the standby indicator may start flashing. If it does, there is a problem in the unit or the connection. If this problem reoccurs even when power is activated from the remote No Audio output from the Connect the cable correctly. control unit, call for servicing. surround back speakers. Surround = NONE has been selected in SETUP mode. Set surround mode EX/ES. The surround back speaker cable connection is incomplete. Make the correct setting. Surround mode is not EX/ES mode. Surround back = NONE has been selected in SPEAKERS SIZE SETUP

46 GENERAL MALFUNCTION AM TUNER SECTION If the equipment malfunctions, this may be Frequency Range ...... 531 - 1602 kHz DIMENSIONS because an electrostatic discharge or AC line Signal to Noise Ratio ...... 50 dB interference has corrupted the information in the Usable Sensitivity ...... Loop 400µV equipment memory circuits. Therefore: Distortion ...... 400Hz, 30 % Mod. 0.5 % ± - disconnect the plug from the AC line supply Selectivity ...... 20 kHz 70 dB ENGLISH

- after waiting at least three minutes, reconnect AUDIO SECTION 25 mm

the plug to the AC line supply SR7500 ENGLISH - re-attempt to operate the equipment Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R ...... 8 ohms 105 W / Ch Center ...... 8 ohms 105 W / Ch Memory backup Surround L&R ...... 8 ohms 105 W / Ch • In case a power outage occurs or the power Surround Back L&R ...... 8 ohms 105 W / Ch cord is accidentally unplugged, the SR7500 Front L&R ...... 6 ohms 135 W / Ch is equipped with a backup function to Center ...... 6 ohms 135 W / Ch prevent memory data such as the preset Surround L&R ...... 6 ohms 135 W / Ch memory from being erased. Surround Back L&R ...... 6 ohms 135 W / Ch 463 mm

SR8500 418 mm Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R ...... 8 ohms 125 W / Ch HOW TO RESET THE UNIT Center ...... 8 ohms 125 W / Ch Surround L&R ...... 8 ohms 125 W / Ch

AV SURROUND RECEIVER SR7500 Surround Back L&R ...... 8 ohms 125 W / Ch

INPUT SELECTOR VOLUME

DISP MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND Front L&R ...... 6 ohms 160 W / Ch DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ DIGITAL L C R

AAC PCM LFE SL S SR DOWN UP Center ...... 6 ohms 160 W / Ch Surround L&R ...... 6 ohms 160 W / Ch Surround Back L&R ...... 6 ohms 160 W / Ch STANDBY ENTER

AUX 1 INPUT POWER ON/OFF PHONES DIGITALS-VIDEO VIDEO LAUDIO R

Input Sensitivity/Impedance ...... 168 mV/ 47 Kohms 20 mm Signal to Noise Ratio(Analog Input / Pure Direct) ...... 105 dB Frequency Response (Analog Input / Pure Direct) 440 mm Should the operation or display seem to be abnormal, ...... 8 Hz - 100 kHz (± 3 dB) reset the unit with the following procedure. (Digital Input / 96 kHz PCM) The SR7500 is turned on, press and hold the ...... 8 Hz - 45 kHz (± 3 dB) MULTI + SPEAKERS A/B buttons simultaneously for 3 seconds or more. VIDEO Remember that the procedure will reset the Television Format ...... NTSC/PAL 170 mm settings of the function selector, Surround mode, Input Level/Impedance ...... 1 Vp-p/75 ohms 184 mm delay time, TUNER PRESET etc., to their initial Output Level/Impedance ...... 1 Vp-p/75 ohms settings. Video Frequency Response ...... 5 Hz to 8 MHz (– 1 dB) Video Frequency (Component) ... 5 Hz to 80 MHz (– 1 dB) S/N ...... 60 dB GENERAL 14 mm Power Requirement ...... AC 230 V 50 Hz TECHNICAL Power Consumption ...... 600 W(SR7500) ...... 620 W(SR8500) SPECIFICATIONS Weight ...... 14.8 Kg (SR7500) ...... 15.0 kg (SR8500) FM TUNER SECTION ACCESSORIES Frequency Range ...... 87.5 - 108.0 MHz Usable Sensitivity ...... IHF 1.8 µV/16.4 dBf Remote Control Unit RC8500SR ...... 1 Signal to Noise Ratio ...... Mono/Stereo 75/70 dB Microphone MC-10 ...... 1 Distortion ...... Mono/Stereo 0.2/0.3 % AAA-size batteries ...... 3 Stereo Separation ...... 1 kHz 45 dB FM Antenna ...... 1 Alternate Channel Selectivity ...... ± 300 kHz 60 dB AM Loop Antenna ...... 1 Image Rejection ...... 98 MHz 70 dB Front AUX Jack Cover ...... 1 Tuner Output Level ...... 1 kHz, ± 75 kHz Dev 800 mV AC cable ...... 1 Specifications subject to change without prior notice. 47

SR7500N DFU_01_ENG 3_3 Page 47 04.10.8, 2:58 PM Adobe PageMaker 6.5J/PPC SETUP CODES RECEIVER/TUNER CABLE SATELLITE Source button name : AMP, TUNER Source button name : AUX1 Source button name : DSS AMPLIFIER Brand name Setup code Brand name Setup code Brand name Setup code Harman/ Kardon 0137, 1331 GoldStar 0171 Canal+ 0880 Source button name : AMP Integra 0162, 1325 Hamlin 0036, 0300 Chaparral 0243 Brand name Setup code JBL 0137, 1333 Instrument 0030 Citycom 1203 Amstrad 0105 JVC 0101, 0558, 1401, 1522 Jerrold 0503, 0837, 0303, 0030 Connexions 0423 Arcam 0296 KLH 1417, 1439 LG 0171 Crossdigital 1136 Audiolab 0296 Kenwood 1340, 1054 MNet 0470 Cyrus 0227 Carver 0296 MCS 0066 Memorex 0027 D-box 0750, 1154 GE 0105 Magnavox 1216, 1296, 0558, 1116 Motorola 0503, 0837, 0303, 1133 DMT 1102 Genexxa 0422 Marantz 1216, 0066, 1116, 1316 NTL 1095 DNT 0227, 0423 Grundig 0296 Micromega 1216 Noos 0844 Daeryung 0423 Harman/Kardon 0919 Musicmagic 1116 Ono 1095 Daewoo 1323 JVC 0358 Myryad 1216 PVP Stereo 0030 Digenius 0326 Left Coast 0919 NAD 0347 Visual Matrix DirecTV 0419, 0593, 0666, 1169, 0274, 0776, 1776, Linn 0296 Norcent 1416 Pace 0264, 1087, 1095 0751, 0846, 1883, 1103, 1136 Magnavox 0296 Onkyo 0162, 0869, 1325 Panasonic 0027, 0035, 0134 Dish Network System 1032, 0802 Marantz 0919, 0296 Optimus 1050, 0558 Paragon 0027 DishPro 1032, 0802 Micromega 0296 Panasonic 1545, 0066, 1315, 1790 Philips 0332, 0344 Distratel 0111 Myryad 0296 Philips 1216, 1296, 1116, 1293, 1295, 1310, 1316Pioneer 0904, 1904, 0171, 0560 Dream Multimedia 1264 Optimus 0422 Pioneer 1050, 0041, 0558, 1411 Pulsar 0027 Echostar 1032, 0802, 0194, 0423, 0637, 0880, 0898, Panasonic 0335 Polk Audio 1316 Quasar 0027 1113 Philips 0919, 0296 Proscan 1281 Regal 0306, 0300 Engel 1044 Pioneer 0040 Quasar 0066 Runco 0027 Expressvu 0802 Polk Audio 0919, 0296 RCA 1050, 1636, 1281, 0558, 1417 Sagem 0844 FTE 0890 Realistic 0422 Saba 0558 Samsung 0027, 0171 Finlux 0482 Revox 0296 Sansui 1116 Scientific Atlanta 0904, 1904, 0504, 0035 Fracarro 0898 Sony 0247 Schneider 0558 Sony 1033 Fuba 0423 Soundesign 0105 Sony 1085, 0185, 1185, 1685, 1785 Starcom 0030 GE 0593 Technics 0335 Stereophonics 1050 Supercable 0303 GOI 0802 Thorens 0296 Sunfire 1340 TS 0030 Galaxis 0890, 1138 Victor 0358 Teac 1417 Tele+1 0470 General Instrument 0896 Wards 0105, 0040 Technics 1335, 1545, 0066, 1336 Telewest 1095 Gold Box 0880 Yamaha 0381 Telefunken 0558 Torx 0030 Grundig 0200, 0874 Thomson 1281 Toshiba 0027 HTS 0802 RECEIVER/TUNER Thorens 1216 Trans PX 0303 Hirschmann 0200, 0423 Uher 0558 United Cable 0030 Hitachi 0846, 0482 Source button name : AMP, TUNER Venturer 1417 Zenith 0027, 0552, 0926 Hughes 1169, 0776, 1776 Brand name Setup code Victor 0101 Network Systems ADC 0558 Wards 0185, 0041 SATELLITE Humax 0890, 1203 Aiwa 1432, 0185, 1116, 1415, 1668 Yamaha 0203, 1203, 1358 InVideo 0898 Alco 1417 Source button name : DSS JVC 0802 Kathrein 0150, 0200, 0227, 0276, 0685, 1248 Anam 1636 CABLE Brand name Setup code Kreiselmeyer 0200 Apex Digital 1284 @sat 1327 Labgear 1323 Audiolab 1216 Source button name : AUX1 ABsat 0150 Logix 1044 Audiotronic 1216 Brand name Setup code Alba 0482 Lorenzen 0326 Audiovox 1417 ABC 0030, 0035 AlphaStar 0799 Magnavox 0751, 0749 Bose 1256 Americast 0926 Amstrad 0874 Cambridge 1397 Manhattan 0482, 1044, 1110 Bell South 0926 Aston 0169, 1156 Marantz 0227 Soundworks Birmingham Cable 0303 Astro 0200 MediaSat 0880 Capetronic 0558 Communications Atsat 1327 Memorex 0751 Carver 1216, 1116 British Telecom 0030 Avalon 0423 Metronic 0111 Centrex 1284 Cable & Wireless 1095 Blaupunkt 0200 Mitsubishi 0776 Denon 1387 Daeryung 0904, 1904, 0504, 0035 British Sky 0874, 1202 Motorola 0896 Ferguson 0558 Director 0503 Broadcasting Myryad 0227 Fine Arts 1216 Filmnet 0470 Canal Digital 0880 Next Level 0896 Grundig 1216 General 0503, 0837, 0303, Canal Satellite 0880 i SATELLITE TAPE DECK CD/CD-R PLAYER TV

Source button name : DSS Source button name : TAPE Source button name : CD, CDR, MD Source button name : TV Brand name Setup code Brand name Setup code Brand name Setup code Brand name Setup code Nokia 0482, 0750, 0778, 1154, 1250, 1750 Aiwa 0056 Genexxa 0059, 0332 MARANTZ 0001 OctalTV 1032 Carver 0056 Goodmans 0332 TV1 (TV, VDP) Orbitech 1127 Grundig 0056 Grundig 0184 MARANTZ 0002 Pace 0482, 0874, 1202, 1350 Harman/Kardon 0056 Harman/ Kardon 0184, 0200 TV2 (Plasma) Panasonic 0274, 0728, 0874, 1347 Magnavox 0056 Hitachi 0059 AGB 0543 Panda 0482 Marantz 0056 JVC 0099 AOC 0478, 0120, 0207, 0087, 0057, 0205, 0036, Paysat 0751 Myryad 0056 Kenwood 0708, 0653, 0055, 0064 0119, 0135 Philips 1169, 0776, 1776, 0751, 1103, 0749, 0160,Optimus 0054 Krell 0184 ASA 0131 0227, 0482, 0880 Philips 0056 LXI 0332 AWA 0036 Pioneer 0880 Pioneer 0054 Linn 0184 Acura 0036 Promax 0482 Polk Audio 0056 MCS 0056 Addison 0119, 0135, 0680 Proscan 0419, 0593 RCA 0054 Magnavox 0184, 0332 Admiral 0120, 0490, 0190 RCA 0419, 0593, 0882, 0170 Revox 0056 Marantz 0653, 0056, 0184 Advent 0788 RFT 0227 Sansui 0056 Matsui 0184 Aiko 0119 RadioShack 0896 Sony 0270 Memorex 0332 Akai 0839, 0729, 0057, 0036, 0235, 0388, 0543 Radiola 0227 Thorens 0056 Meridian 0184 Akura 0291 Radix 0423 Wards 0054 Micromega 0184 Alba 0036, 0064, 0398, 0695 SKY 0883, 0874, 1202 Miro 0027 America Action 0207 SM Electronic 1227 LASER DISK Mission 0184 Ampro 0778 Sabre 0482 Myryad 0184 Amstrad 0198, 0036, 0064, 0398, 0439, 0460, 0543 Sagem 0847, 1141, 1280 Source button name : AUX2 NAD 0027 Anam 0277, 0207, 0036 Samsung 1303, 1136, 1044, 1319 NSM 0184 Anam National 0277, 0677 Brand name Setup code Sat Control 1327 Naim 0184 Anitech 0036 Carver 0091 Satstation 1110 Onkyo 0895 Apex Digital 0775, 0792, 0794 Denon 0086 Schwaiger 1138 Optimus 0027, 0059, 0064, 0206, 0332 Audiosonic 0064, 0136 Marantz 0091 Seemann 0423 Panasonic 0056 Audiovox 0478, 0207, 0119, 0650 Mitsubishi 0086 Siemens 0200 Philips 0653, 0184 Bang & Olufsen 0592 NAD 0086 Sony 0666, 1666, 0874 Pioneer 0059, 0332 Basic Line 0036 Nagsmi 0086 Star Choice 0896 Polk Audio 0184 Baur 0064, 0388, 0539 Optimus 0086 Strong 1327 Proton 0184 Baysonic 0207 Philips 0091 TPS 0847, 1280 QED 0184 Beaumark 0205 Pioneer 0086 Tantec 0482 Quad 0184 Beko 0397, 0513, 0741, 0742 Salora 0091 TechniSat 1126, 1127 Quasar 0056 Bell & Howell 0181 Sony 0228 Telestar 1127 RCA 0059, 0206, 0332 Beon 0064 Telefunken 0086 Thomson 0482, 0880, 1073, 1318 Realistic 0206 Blaupunkt 0222 Topfield 1233 Revox 0184 Blue Sky 0695, 1064 Toshiba 0776, 1776, 0817 CD/CD-R PLAYER Rotel 0184 Bondstec 0274 UltimateTV 0419, 0666 SAE 0184 Bradford 0207 Uniden 0751, 0749 Source button name : CD, CDR, MD Sansui 0184, 0332 Brandt 0136, 0362 Universum 0200 Brand name Setup code Sanyo 0206 Broksonic 0263, 0490 Ventana 0227 Aiwa 0184 Scott 0332 Bush 0036, 0064, 0398, 0401, 0695, 1064 Wisi 0200, 0423, 0482 Arcam 0184 Sears 0332 CCE 0064 XSat 0150 Audio Research 0184 Sharp 0888, 0064 CGE 0274 Zehnder 1102 AudioTon 0184 Simaudio 0184 CTC 0274 Zenith 0883, 1883 Audiolab 0184 Sonic Frontiers 0184 CXC 0207 Audiomeca 0184 Sony 0517, 0027 Candle 0057 Cairn 0184 Symphonic 0332 Carnivale 0057 California Audio Labs 0056 TAG McLaren 0184 Carver 0081, 0197 Carver 0184, 0206 Tandy 0059 Cascade 0036 Cyrus 0184 Technics 0056 Cathay 0064 DKK 0027 Thorens 0184 Celebrity 0027 DMX Electronics 0184 Thule 0184 Celera 0792 Denon 0900 Universum 0184 Centurion 0064 Dynamic Bass 0206 Victor 0099 Changhong 0792 Emerson 0332 Wards 0184 Ching Tai 0036, 0119 Fisher 0206 ii TV TV TV TV

Source button name : TV Source button name : TV Source button name : TV Source button name : TV Brand name Setup code Brand name Setup code Brand name Setup code Brand name Setup code Chun Yun 0027, 0207, 0036, 0119 GE 0074, 0078, 0478, 0207, 0057, 0205, 1481,Kathrein 0583 Onwa 0207, 0460 Chung Hsin 0207, 0080, 0135 0119, 0587, 1174, 1374 Kendo 0064 Optimus 0181, 0277, 0193, 0677 Cimline 0036 GEC 0064, 0543 Kenwood 0057 Optonica 0120 Cineral 0478, 0119 Gateway 1782, 1783 Kneissel 0286, 0462 Orion 0263, 0490, 0064, 0347, 0543 Citizen 0087, 0057, 0119 Geloso 0036 Kolin 0207, 0080, 0135 Osaki 0291, 0439 Clarion 0207 Genexxa 0190 Korpel 0064 Otto Versand 0064, 0347, 0539, 0583 Clarivox 0064 Gibralter 0044, 0057 Koyoda 0036 Palladium 0397, 0445 Clatronic 0274, 0397 GoldStar 0181, 0057, 0205, 0064, 0136, 0404 L&S Electronic 0835 Panama 0291 Condor 0347, 0397 Goodmans 0064, 0398, 0401, 0661 LG 0087, 0057, 0205, 0064, 0135, 0741 Panasonic 0081, 0277, 0078, 0064, 0190, 0677, 1437 Conrac 0835 Gorenje 0397 LXI 0074, 0081, 0181, 0183, 0205 Pathe Cinema 0265, 0347 Contec 0207, 0036 Gradiente 0080, 0197 Leyco 0064, 0291 Pausa 0036 Craig 0207 Graetz 0190, 0388 Liesenk & Tter 0064 Penney 0074, 0183, 0078, 0087, 0057, 0205, 1374 Crosley 0081 Granada 0064, 0235, 0366, 0543 Loewe 0539 Perdio 0347 Crown 0207, 0036, 0064, 0397, 0445 Grandin 0637 Luxor 0383, 0388 Philco 0081, 0490, 0207, 0057, 0205, 0172, 1688, Curtis Mathes 0074, 0081, 0181, 0478, 0120, 0087, 0729,Grundig 0064, 0222, 0514, 0583, 0614 M Electronic 0036, 0064, 0131, 0132, 0136, 0190, 0314, 0064, 0274 0057, 0172, 0193, 1174, 1374 Grunpy 0207 0373, 0401, 0507 Philips 0081, 0027, 0078, 0057, 0205, 1481, 0064, Daewoo 0181, 0478, 0207, 0057, 0205, 1688, 0036,HCM 0036, 0439 MGA 0177, 0057, 0205 0119, 0135, 0401, 0583, 0717 0064, 0119, 0135, 0197, 0401, 0650, 0661 Hallmark 0205 MTC 0087, 0057, 0539 Phonola 0064 Dansai 0064 Hankook 0207, 0057, 0205 Magnadyne 0274, 0543 Pilot 0057 Dayton 0036 Hanseatic 0064, 0347, 0388, 0455, 0583 Magnafon 0543 Pioneer 0193, 0136, 0190, 0314, 0706, 0787, 0893 De Graaf 0235, 0575 Hantarex 0543 Magnavox 0081, 0057, 1481, 1281 Portland 0119 Decca 0064, 0543 Harman/Kardon 0081 Manesth 0291, 0347 Prandoni-Prince 0543 Denon 0172 Harvard 0207 Mark 0064 Prima 0788 Digatron 0064 Havermy 0120 Matsui 0036, 0064, 0235, 0398, 0514, 0543 Prism 0078 Dixi 0036, 0064 Hello Kitty 0478 Matsushita 0277, 0677 Profex 0036, 0388 Dumont 0044 Hinari 0036, 0064 Mediator 0064 Proscan 0074 Dwin 0747, 0801 Hisawa 0482 Medion 0695, 0835, 1064 Protech 0036, 0064, 0274, 0291, 0445, 0695 ECE 0064 Hitachi 0057, 0205, 1172, 0172, 1283, 0036, 0119,Megatron 0205, 0172 Proton 0057, 0205, 0036 0132,0136, 0190, 0252, 0383, 0508, 0575, Elbe 0286 Memorex 0181, 0277, 0490, 0177, 0205, 0036, 1064Pulsar 0044 Electroband 0027 0605 Metz 0474 Quasar 0277, 0078, 0677 Elin 0064, 0575 Hua Tun 0036 Micromaxx 0835 Quelle 0064, 0131, 0388, 0539 Elite 0347 Huanyu 0401 Microstar 0835 R-Line 0064 Elta 0036 Hypson 0064, 0291 Midland 0074, 0044, 0078 RCA 0074, 0027, 0057, 0205, 1474, 1481, 0117, Emerson 0181, 0263, 0490, 0207, 0205, 0388, 0650ICE 0291, 0398 Minerva 0514 0119, 0706, 1074, 1174, 1274, 1374, 1574 Envision 0057, 0840 ITS 0398 Minoka 0439 RFT 0455 Epson 0860 ITT 0190, 0388, 0575 Mitsubishi 0181, 0277, 0120, 0263, 0207, 0177, 1277,RadioShack 0074, 0181, 0207, 0057, 0205 Erres 0064 Imperial 0274, 0397, 0445 0057, 0205, 0135, 0539, 0863 Radiola 0064 Ether 0057, 0036 Indiana 0064 Mivar 0318, 0319, 0543, 0636 Radiomarelli 0543 Etron 0036 Infinity 0081 Motorola 0120 Realistic 0181, 0207, 0057, 0205 Europhon 0543 Ingelen 0190 Multitech 0207, 0036 Rediffusion 0388 Ferguson 0064, 0100, 0136, 0265, 0314, 0362, 0587Inno Hit 0543 Myryad 0583 Reoc 0741 Fidelity 0388 Innova 0064 NAD 0183, 0205, 0388, 0893 Revox 0064 Finlandia 0235, 0373 Inteq 0044 NEC 0181, 0183, 0078, 0057, 0205, 0036, 0197,Rex 0190, 0286, 0291 Finlux 0064, 0131, 0132, 0373, 0543 Interfunk 0064, 0190, 0274, 0388, 0539 0482, 0524, 1731 Roadstar 0036, 0291, 0445 Firstar 0263, 0036 Intervision 0064, 0291, 0404 NEI 0064 Runco 0044, 0057, 0524, 0630 Firstline 0036, 0274, 0695 JBL 0081 NTC 0119 SBR 0064 Fisher 0181, 0131, 0235, 0397 JCB 0027 Neckermann 0064, 0583 SEG 0291, 0695 Flint 0482 JVC 0490, 0080, 0398, 0680, 0710 Netsat 0064 SEI 0543 Formenti 0064, 0347 Jean 0183, 0078, 0263, 0036, 0119 Newave 0120, 0205, 0036, 0119 SKY 0064 Fortress 0120 Jensen 0788 Nikkai 0064, 0291 SSS 0207 Frontech 0190, 0274, 0291 KEC 0207 Nikko 0057, 0205, 0119 Saba 0136, 0190, 0314, 0362 Fujitsu 0710, 0836 KTV 0207, 0057 Nokia 0388, 0500, 0507, 0575, 0658 Saccs 0265 Funai 0207, 0198, 0291 Kaisui 0036 Norcent 0775, 0851 Sagem 0637 Futuretech 0207 Kapsch 0190 Nordmende 0136, 0314, 0587 Saisho 0036, 0291, 0543 Karcher 0637 Oceanic 0190, 0388 Salora 0190, 0383, 0388, 0575 iii TV TV VCR VCR

Source button name : TV Source button name : TV Source button name : VCR Source button name : VCR Brand name Setup code Brand name Setup code Brand name Setup code Brand name Setup code Sambers 0543 Teac 0036, 0064, 0291, 0439, 0445, 0482, 0695,Anam 0064, 0267, 0305, 0253, 0507 GEC 0108 Sampo 0181, 0120, 0057, 0205, 0198, 0036, 0119, 1064 Anam National 0253, 1589 Garrard 0027 0677, 1782 Tec 0274 Anitech 0099 General 0072 Samsung 0181, 0087, 0839, 0729, 0057, 0205, 0036,Technema 0347 Asha 0267 Go Video 0459 0064, 0117, 0119, 0291, 0397, 0583, 0614, Technics 0277, 0078, 0677 Asuka 0064 GoldHand 0099 0645, 0793, 0841 Techwood 0078 Audiovox 0064, 0305 GoldStar 0064, 0252, 0507, 1264 Sansei 0478 Teco 0078, 0120, 0205, 0036, 0119, 0291, 0680Baird 0027, 0131, 0068 Goodmans 0064, 0027, 0099, 0305 Sansui 0490 Teknika 0081, 0207, 0177, 0087, 0119 Basic Line 0099, 0305 Gradiente 0027 Sanyo 0181, 0207, 0131, 0235, 0366, 0826 Telefunken 0729, 0136, 0289, 0362, 0652 Beaumark 0267 Graetz 0267, 0131, 0068 Schaub Lorenz 0388 Telemeister 0347 Bell & Howell 0131 Granada 0108, 0131 Schneider 0064, 0274, 0398, 0695 Teletech 0036 Blaupunkt 0253 Grandin 0064, 0027, 0099 Scotch 0205 Tensai 0347 Brandt 0347 Grundig 0108, 0099, 0253, 0374 Scott 0263, 0207, 0205 Tera 0057 Brandt Electronic 0068 HCM 0099 Sears 0074, 0081, 0181, 0183, 0205, 0198 Thomson 1474, 0136, 0314, 0587, 0652 Broksonic 0211, 0375, 1506 HI-Q 0074 Seleco 0190, 0286 Thorn 0064, 0131, 0388, 0539 Bush 0099, 0305, 0379 Hanseatic 0064 Semivox 0207 Toshiba 0181, 0183, 0087, 1283, 0535, 0645, 0677,CCE 0099, 0305 Harley Davidson 0027 Semp 0183 0859, 1383, 1683, 1731 CGE 0027 Harman/Kardon 0108 Sharp 0120, 0057, 0677 Triumph 0543 Calix 0064 Harwood 0099 Shen Ying 0036, 0119 Tuntex 0057, 0036, 0119 Canon 0062 Hinari 0267, 0099, 0379 Sheng Chia 0120, 0263, 0036 Uher 0347 Carver 0108 Hitachi 0064, 0267, 0027, 0069, 0068 Siarem 0543 Universum 0064, 0131, 0132, 0291, 0373, 0397, 0519Cimline 0099 Hughes 0069 Siemens 0064, 0222 Vector Research 0057 Cineral 0305 Network Systems Sinudyne 0543 Vestel 0064 Citizen 0064, 0305, 1305 Hypson 0099 Skantic 0383 Victor 0277, 0080, 0677, 0680 Colt 0099 ITT 0267, 0131, 0068 Skygiant 0207 Videosat 0274 Combitech 0379 ITV 0064, 0305 Skyworth 0064 Vidikron 0081 Craig 0064, 0074, 0267, 0099 Imperial 0027 Solavox 0190 Vidtech 0205 Crown 0099, 0305 Interfunk 0108 Sonitron 0235 ViewSonic 1782 Curtis Mathes 0087, 0062, 0068, 1062 JVC 0072, 0094, 0068 Sonoko 0036, 0064 Vision 0347 Cybernex 0267 Jensen 0068 Sonolor 0190, 0235 Voxson 0190 Cyrus 0108 KEC 0064, 0305 Sontec 0064 Waltham 0383 Daewoo 0072, 0131, 0305, 0669, 1305 KLH 0099 Sony 1127, 0027, 0677, 0861, 1532, 1678 Wards 0081, 0057, 0205, 0893 Dansai 0099 Kaisui 0099 Soundesign 0207, 0205 Watson 0064, 0347 De Graaf 0069 Kenwood 0094, 0068 Soundwave 0064, 0445 Waycon 0183 Decca 0108, 0027 Kodak 0062, 0064 Sowa 0183, 0078, 0087, 0205, 0119 White Westinghouse 0490, 0064, 0347,0650 Denon 0069 Kolin 0070, 0068 Squareview 0198 Yamaha 0057, 0796, 0860 Dual 0068 Korpel 0099 Standard 0036 Yapshe 0277 Dumont 0108, 0027, 0131 LG 0064, 0072, 0069, 0507 Starlite 0207 Yoko 0064, 0291 Dynatech 0027 LXI 0064 Stern 0190, 0286 Zenith 0044, 0490, 0205, 0119 ESC 0267, 0305 Lenco 0305 Supreme 0027 Elcatech 0099 Leyco 0099 Sylvania 0081, 0057, 0198 VCR Electrohome 0064 Lloyd’s 0027 Symphonic 0207, 0198 Electrophonic 0064 Loewe 0064, 0108, 1589 Synco 0027, 0478, 0120, 0087, 0205, 0119 Source button name : VCR Emerex 0059 Logik 0267, 0099 Sysline 0064 Emerson 0062, 0064, 0211, 0267, 0072, 0027, 0070,Luxor 0075, 0131, 0070 Brand name Setup code T + A 0474 0305, 1305, 1506 M Electronic 0027 ASA 0064, 0108 TCM 0835 Ferguson 0068, 0347 MEI 0062 Admiral 0075 TMK 0205 Fidelity 0027 MGA 0267, 0070 Adventura 0027 TNCi 0044 Finlandia 0108, 0131 MGN Technology 0267 Aiko 0305 TVS 0490 Finlux 0108, 0027, 0069, 0131 MTC 0267, 0027 Aiwa 0064, 0027, 0334, 0375, 0379 Tacico 0205, 0036, 0119 Firstline 0064, 0072, 0070, 0099 Magnasonic 1305 Akai 0068, 0342 Tai Yi 0036 Fisher 0074, 0131 Magnavox 0062, 0066, 0108, 0027, 1808 Akiba 0099 Tandy 0120, 0190 Fuji 0062, 0060 Magnin 0267 Alba 0099, 0305, 0342, 0379 Tashiko 0119, 0677 Fujitsu 0072, 0027 Manesth 0072, 0099 America Action 0305 Tatung 0081, 0181, 0183, 0078, 0087, 0036, 0064, Funai 0027 Marantz 0062, 0108 American High 0062 0543 GE 0087, 0062, 0267, 0834, 1062, 1087 Marta 0064 Amstrad 0027 iv VCR VCR VCR DVD

Source button name : VCR Source button name : VCR Source button name : VCR Source button name : DVD Brand name Setup code Brand name Setup code Brand name Setup code Brand name Setup code Matsui 0375, 0379 Realistic 0062, 0064, 0075, 0074, 0027, 0131 Thomson 0087, 0094, 0068, 0347 JVC 0585, 0650 Matsushita 0062 Reoc 0375 Thorn 0131, 0068 KLH 0744 Medion 0375 ReplayTV 0641, 0643 Tivo 0645, 0663 Kenwood 0517, 0561 Memorex 0062, 0064, 0075, 0066, 0074, 0267, 0027,Rex 0068 Toshiba 0108, 0072, 0094, 0070, 0068, 0872 Koss 0678 0131, 0334, 0375, 1264 Roadstar 0064, 0267, 0099, 0305 Totevision 0064, 0267 LG 0768 Memphis 0099 Runco 0066 Uher 0267 Limit 0795 Metz 0064, 0374, 1589 SBR 0108 Unitech 0267 Magnavox 0530, 0702 Minolta 0069 SEG 0267 Universum 0064, 0108, 0267, 0027 Memorex 0858 Mitsubishi 0108, 0094, 0070, 0068, 0834 SEI 0108 Vector 0072 MiCO 0750 Motorola 0062, 0075 STS 0069 Victor 0094, 0068 Microsoft 0549 Multitech 0027, 0099 Saba 0068, 0347 Video Concepts 0072 Mintek 0744 Murphy 0027 Salora 0070 Videomagic 0064 Mitsubishi 0548 Myryad 0108 Sampo 0064, 0075 Videosonic 0267 Mustek 0757 NAD 0131 Samsung 0267, 0072, 0459 Villain 0027 Nesa 0744 NEC 0062, 0064, 0075, 0131, 0094, 0068 Sanky 0075, 0066 Wards 0087, 0062, 0075, 0074, 0108, 0267, 0027,Onkyo 0530 National 0253 Sansui 0027, 0094, 0068, 1506 0069, 0099 Oritron 0678 Neckermann 0108 Sanyo 0074, 0267, 0131 White Westinghouse 0099 Palsonic 0699 Nesco 0099 Saville 0379 XR-1000 0062, 0027, 0099 Panasonic 0517, 0659, 1389 Newave 0064 Schaub Lorenz 0027, 0131, 0068 Yamaha 0068 Philips 0530, 0566, 0673, 0881 Nikko 0064 Schneider 0108, 0027, 0099 Yamishi 0099 Pioneer 0552, 0598, 0658, 0659 Noblex 0267 Scott 0211, 0072, 0070 Yokan 0099 Polk Audio 0566 Nokia 0267, 0131, 0068 Sears 0062, 0064, 0074, 0027, 0069, 0131, 1264Yoko 0267 Proscan 0549 Nordmende 0068, 0347 Seleco 0068 Zenith 0066, 0060, 0027, 1506 Qwestar 0678 Oceanic 0027, 0068 Semp 0072 RCA 0549, 0598, 0744 Okano 0342, 0375 Sharp 0075, 0834 DVD Rotel 0650 Olympus 0062, 0253 Shintom 0131, 0099 SM Electronic 0757 Optimus 0064, 0075, 0131, 0459 Shogun 0267 Source button name : DVD Samsung 0600 Orion 0211, 0375, 0379, 1506 Siemens 0064, 0108, 0131 Sanyo 0697 Brand name Setup code Osaki 0064, 0027, 0099 Silva 0064 Sharp 0657 MARANTZ DVD1 0001 Otto Versand 0108 Singer 0072, 0099 Sherwood 0797 MARANTZ DVD2 0002 Palladium 0064, 0068, 0099 Sinudyne 0108 Shinsonic 0560 Acoustic Solutions 0757 Panasonic 0062, 0252, 0253, 0643, 1062, 1589 Sonic Blue 0641, 0643 Slim Art 0811 Alba 0744 Pathe Marconi 0068 Sontec 0064 Sony 0560, 0891 Amstrad 0740 Penney 0062, 0064, 0267, 0069, 1062, 1264 Sony 0062, 0059, 0060, 0027, 0663, 1259 Sylvania 0702 Apex Digital 0699, 0744, 0782, 0821, 0823, 0857, 1127 Pentax 0069 Sunkai 0375 Tatung 0797 Blaupunkt 0744 Perdio 0027 Sunstar 0027 Teac 0598, 0744 Blue Parade 0598 Philco 0062 Suntronic 0027 Technics 0517 Bush 0740 Philips 0062, 0108, 0645, 1108, 1208 Sylvania 0062, 0108, 0027, 0070, 1808 Theta Digital 0598 Centrex 0699 Phonola 0108 Symphonic 0027 Thomson 0549 Clatronic 0815 Pilot 0064 TMK 0267 Toshiba 0530 CyberHome 0741 Pioneer 0108, 0069, 0094 Tandy 0027, 0131 Urban Concepts 0530 DVD2000 0548 Polk Audio 0108 Tashiko 0064, 0027 XBox 0549 Daewoo 0811, 0797 Profitronic 0267 Diamond 0795 Yamaha 0517, 0566, 0572 Dansai 0797 Proline 0027 Digitrex 0699 Zenith 0530, 0618, 0768 Decca 0797 Proscan 0087, 1087 Emerson 0618 Zeus 0811 Denon 0517 Protec 0099 Tatung 0108, 0072, 0027, 0094, 0068 Enterprise 0618 Pulsar 0066 Teac 0027, 0068, 0305, 0334, 0669 Fisher 0697 Pye 0108 Technics 0062, 0253 GE 0549, 0744 Quasar 0062, 1062 Teco 0062, 0064, 0075, 0068 Go Video 0742 Quelle 0108 Teknika 0062, 0064, 0027 GoldStar 0768 RCA 0087, 0062, 0267, 0069, 0834, 1062, 1087Teleavia 0068 Gradiente 0678 RadioShack 0027 Telefunken 0068, 0347 Greenhill 0744 Radiola 0108 Tenosal 0099 Grundig 0566 Radix 0064 Tensai 0027 Hitachi 0600, 0691 Randex 0064 Thomas 0027 Hiteker 0699 v Source button name : DVD Source button name : VCR Source button name : MD DIRECT BUTTON PAGE Command Note PAGE Command Note PAGE Command Note PAGE 1 1 MENU SELECTS MAIN MENU PAGE 1 1 TV/VCR SELECT TV/VCR PAGE 1 1 REPEAT SELECTS REPEAT MODE FUNCTIONS 2 AUDIO SELECT LANGUAGES 2 2XPLAY TWICE NORMAL PLAYBACK 2 SHUFLE SELECTS SHUFFLE PLAY 3 SUB-T SELECT SUB TITLE SPEED 3 DISP SELECTS DISPLAY MODE Source button name : AMP 4 10+ DIGIT ENTRY +10 3 SLOW SLOW PLAYBACK SPEED 4 EDIT SELECT EDIT MODE PAGE Command Note 5 TRAY TRAY OPEN/CLOSE 4 STILL STILL FRAME 5 EJECT EJECT PAGE 1 1 AUTO SELECT AUTO SURROUND PAGE 2 1 SETUP SELECTS SETUP MENU 5 EJECT EJECT PAGE 2 1 SP/LP SELECTS SP/LP MODE 2 2 SELECT DOLBY MODE 2 ANGLE SELECTS ANGLE PAGE 2 1 OTR ONE TOUCH RECORDING 2 DELETE SELECTS DELETE 3 DTS SELECT DTS MODE 3 OSD ACTIVATES ON SCREEN DISPLAY 2 AUDIO SELECT AUDIO MODE 3 ENTER SELECTS ENTER 4 EX/ES SELECT EX/ES 4 FF FAST FORWARD 3 SKIP SKIP TO NEXT PROG.MARKER 4 FF FAST FORWARD 5 DIRECT SELECT PURE DIRECT 5 REW REWIND 4 FF FAST FORWARD 5 REW REWIND PAGE 2 1 MCH-ST SELECT MULTI CHANNEL PAGE 3 1 SLOW SLOW FORWARD 5 REW REWIND PAGE 3 1 MARKER SELECTS AUTO MARKER STEREO 2 L-PLAY LAST PLAY PAGE 3 1 VIS + VHS INDEX SERCH NEXT 2 PROG SELECTS PROGRAM MODE 2 STEREO SELECT STEREO MODE 3 SHUFLE SHUFFLE PLAY 2 VIS- VHS INDEX SERCH PREVIOUS 3 SYNC-R SYNCRO REC 3 VIRTUA SELECT VIRTUAL MODE 4 REPEAT REPEAT MODE 3 4 CHAR SELECTS CHARACTER MODE 4 CS-II SELECT CS-II MODE 5 A/B REPEAT A TO B 4 5 5 HT-EQ – PAGE 4 1 RETURN RETURN TO MENU 5 PAGE 3 1 NIGHT NIGHT MODE ON/OFF 2 T/C TITLE AND CHAPTER 2 BASS + BASS + 3 3-D SURROUND ON/OFF Source button name : CDR 3 BASS - BASS - 4 TITLE SELECTS TITLE MENU PAGE Command Note 4 TREB + TREBLE + 5 ZOOM ZOOM MODE ON/OFF PAGE 1 1 INPUT SELECT INPUT SOURCE 5TREB - TREBLE - 2 INCR INCREMENTS TRACK No. PAGE 4 1 MULTI MULTI ROOM ON/OFF Source button name : CD 3 SYNC-R ACTIVATE SYNCRO 2 M-SPKR MULTI SPEAKER ON/OFF PAGE Command Note RECORDING 3 A/D SELECT ANALOG/DIGITAL PAGE 1 1 DISC + CD CHANGER NEXT DISC 4 PROG ACTIVATE PROGRAM MODE 4 V-OFF VIDEO OFF 5 AUDIO – 2 DISC - CD CHANGER PREVIOUS DISC 5 TRAY TRAY OPEN/CLOSE 3 SHUFLE SHUFFLE PLAY PAGE 2 1 SCROLL SCROLL/RECALL 4 REPEAT REPEAT 2 FINAL FINALIZES(WRITES TOC) Source button name : TUNER 5 TRAY TRAY OPEN/CLOSE 3 BLANK RECORDS BLANK PAGE Command Note PAGE 2 1 TEXT ACTIVATE TEXT FUNCTION 4 FF FAST FORWARD PAGE 1 1 FM SELECT FM 2 AMS AUTO MUSIC SCAN 5 REW REWIND 2 AM SELECT AM 3 SCROLL SCROLL/RECALL PAGE 3 1 BLANK RECORDS BLANK 3 LW SELECT LW 4 FF FAST FORWARD 2 REPEAT ACTIVATE REPEAT MODE 4 T-MODE SELECT MONO/STEREO 5 REW REWIND 3 5 BAND SELECT RADIO BAND PAGE 3 1 DISC 1 CD CHANGER DISC 1 4 PAGE 2 1 SCAN + FREQUENCY SCAN UP 2 DISC 2 CD CHANGER DISC 2 5 2 SCAN - FREQUENCY SCAN DOWN 3 DISC 3 CD CHANGER DISC 3 3 T-MODE SELECT MONO/STEREO 4 DISC 4 CD CHANGER DISC 4 4 P-SCAN SELECT PRESET SCAN Source button name : TAPE 5 DISC 5 CD CHANGER DISC 5 5 P-INFO SHOW PRESET INFORMATION PAGE Command Note PAGE 4 1 UNIT SELECT UNIT No. PAGE 3 1 DISP RDS DISPLAY PAGE 1 1 TAPE-A SELECT TAPE DECK A 2 TITL-S SELECT TITLE SEARCH European 2 PTY RDS PTY 2 TAPE-B SELECT TAPE DECK B 3 TRACK SELECT TRACK No. model only 3 AF RDS ALTERNATE FREQEMCY 3 DIR AUTO REVERSE DIRECTION 4 CATGRY SELECT CATEGORY 4 TIME TIME DISPLAY 4 STM RDS STATION MODE 5 P-MODE SELECT PLAY MODE 5 DWR RDS DSR WAVE LANGUAGE 5 TRAY TRAY OPEN/CLOSE PAGE 4 1 MULTI MULTI ROOM ON/OFF PAGE 2 1 AMS AUTO MUSIC SCAN 2 M-SPKR MULTI SPEAKER ON/OFF 2 3 3 4 P-SET + PRESET UP 4 FF FAST FORWARD 5 P-SET - PRESET DOWN 5 REW REWIND

vi www.marantz.com You can find your nearest authorized distributor or dealer on our website.

JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.

is a registered trademark.

Printed in China 09/2004 00M10BW851310 ecmf-e