Red Dot Sights for Military & Law Enforcement

RED DOT SIGHTS FOR MILITARY & LAW ENFORCEMENT

Canada’s leading supplier of operational equipment

1-855-729-0446 WE HAVE ACCESS TO 50,000+ PRODUCTS AND 500+ MANUFACTURERS [email protected] WE CAN MEET EVEN THE MOST CHALLENGING MISSION REQUIREMENTS. BRING US YOURS. RAMPARTCORP.COM WHY AN AIMPOINT® RED DOT SIGHT?

To be successful, shooters must be able to aim accu- rately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most experienced marksman will be put to the test.

Military tests have repeatedly proven that the single red dot reticle is the fastest on target in timed and rapid-ﬁre close combat exercises, and also provides the greatest increase in hit probability with moving targets. Other aiming devices require that the shooter’s focus leave the target or create limited situational awareness. Aimpoint red dot sights give you increased aiming conﬁdence, allow you to remain on target and shoot with both eyes open, so you are fully aware at all times. WHEN YOUR LIFE DEPENDS ON YOUR EQUIPMENT

When the time comes to take the shot, there should be no question that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness. We know that conditions in the ﬁeld place extreme demands on your equipment, so we design and test Aimpoint® products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are. Whether in the ﬁeld or on the streets, you can count on Aimpoint red dot sights.

AIMPOINT –GLOBAL LEADER

Aimpoint is the recognized worldwide leader and originator of red dot sighting technology. After more than 40 years of working closely with experienced marksmen and military weapon experts around the world, Aimpoint red dot sights remain the number one choice for combining ruggedness, speed and accuracy.

Aimpoint® sights are in service with most NATO countries, the US Army, US Air Force, the US Navy, the US Marine Corps, and numerous other military forces, police agencies, and special teams worldwide. Aimpoint red dot sights are soldier tested and combat proven. GET THE WHO

SUPERIOR SITUATIONAL AWARENESS

Dangerous situations can happen suddenly whether on the streets or in active combat. Aiming with both eyes, seeing the target as well as the surrounding is

the tremendous advantage of an Aimpoint sight. You instinctively place the red dot on the target, and you’re ready to pull the trigger.

We design our sights so that you can be faster and more accurate. Aimpoint sights allow you to see the whole picture in every mission. When your life depends on it, don’t settle for anything less. OLE PICTURE SYSTEM-OF-SYSTEMS™

INTEGRATED COMBAT OPTICS SOLUTION Aimpoint has distinguished itself as a supplier of sophis- ticated modular sighting systems, offering end users not just stand alone products but rather complete modular optical solutions. Although the primary focus for Aimpoint has always been the electronic reﬂex collimator (red dot) sight, we also offer a choice of modular accessories that can be used together with Aimpoint® sights in order to enhance operators’ capabilities.

6 ALL CONDITIONS – ANYWHERE

Aimpoint® sights work in all light conditions, from the darkness of the forest before dawn, to bright mountain sunlight. They are completely waterproof so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero temperatures of the Arctic to the heat and humidity of the tropics.

ON ANY TYPE OF FIREARM Our mechanical switch and push Whether you have a riﬂe, shotgun, buttons will not freeze and are easy handgun, black powder riﬂe or bow, to operate whether you are wearing Aimpoint has a sight for you. gloves or not.

USER FRIENDLINESS ENVIRONMENTAL Aimpoint sights are very user AWARENESS friendly. Operated by a mechanical At Aimpoint, we take great pride in switch or pushbuttons, an Aimpoint making sure that neither hazardous sight can be easily and quickly nor radioactive materials are used changed to the right setting while in our sights. simultaneously aiming.

STANDARD FEATURES ON ALL AIMPOINT® SIGHTS

• Unlimited ﬁeld of view • Absence of parallax - No centering needed • Unlimited eye relief • Operational in extreme weather conditions • Extremely rugged, durable construction • No hazardous materials • No laser emission that could be harmful to your eyes • Increased aiming conﬁdence and hit probability • Reduced training time and ammunition consumption • Battery life measured in years

7 ACRO P-1™

Aimpoint® Acro P-1 was developed for use on pistols and other weapon platforms requiring a small enclosed red dot system. It is the only sight in its size category fully tested for shock, vibration, temperature span and other environmental stress.

ACRO P-1™

ƌƟĐůĞEŽ ϮϬϬϱϬϰ ŽƚƐŝǌĞ ϯ͘ϱDK ĂƩĞƌǇůŝĨĞ ŵŽƌĞƚŚĂŶϭ͘ϱǇĞĂƌƐŽĨƵƐĞ ĂƚƐĞƫŶŐϲ ĂƩĞƌǇƚǇƉĞ KŶĞϯsůŝƚŚŝƵŵ ZϭϮϮϱďĂƩĞƌǇ WŽǁĞƌƐǁŝƚĐŚ WƵƐŚďƵƩŽŶ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϲϬŐ

The Acro P-1 is the smallest enclosed system on the market. Tested with a minimum of 20,000 rounds on a .40 cal pistol slide, this small optic has proven to lead in ruggedness and reliability in its category. The Acro P-1 can be used as a backup sight for magnifying scopes, personal defense weapons, and any area where a small red dot system is applicable.

EXAMPLESEXAMPLES OFOF MOUNTINGM SOLUTIONSIONS

Acro QD Mount 22 mm Acro QD Mount 30 mm Acro QD Mount 39 mm Quick Detachable Mount Quick Detachable Mount for Quick Detachable Mount for for Acro sights. Raises Acro sights. Raises height of Acro sights. Raises height of height of optical axis to optical axis to 30 mm. Fits optical axis to 39 mm. Fits 22 mm. Fits on Weaver on Weaver and Picatinny rail. on Weaver and Picatinny rail. and Picatinny rail. Item. No. 200518 Item. No. 200519 Item. No. 200517

The different adapter plates available make it possible to mount the Acro P-1 on several weapon platforms.

For information about more Acro mounting solutions adapted for speciﬁc weapon types please see page 26.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

8 9 MICRO™ SERIES SIGHTS

No matter what your mission, the size and weight of your equipment is a critical factor. With the Micro series Aimpoint introduced an aiming system that provides the performance of our full-sized sights in a small package.

MICRO T-2™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϱϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ZϮϬϯϮ;ϯsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϵϲŐͬϯ͘ϰŽǌ tĞŝŐŚƚ;ƐƚĚĐŽŶĮŐ͘Ϳ ϭϯϱŐͬϰ͘ϴŽǌ KƉƟŵŝǌĞĚĨŽƌŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐĂŶĚh;ƐĞĞƉĂŐĞ ϭϲͲϭϴͿĂŶĚĐŽŵƉĂƟďůĞǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐEsƐ;EŝŐŚƚ sŝƐŝŽŶĞǀŝĐĞƐͿ͘

The Aimpoint® Micro T-2 has a reinforced housing as well as flip-up covers protecting the lenses. It can withstand all types of environmental conditions. The optical performance of the sight is outstanding with optimized lens and reflective lens coatings. This makes the Micro T-2 and the Aim- point® magnifiers a fantastic optical combination.

COMPLETE AND READY TO MOUNT The standard configuration of the Micro T-2 contains the sight, a Picatinny mount, a black front flip-up cover, a transparent rear flip-up cover that allow the user to engage a target with both lens covers closed in an emergency situation.

MICRO T-1™

ŽƚƐŝǌĞ ϮDKͬϰDK ĂƩĞƌǇůŝĨĞ ϱϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ZϮϬϯϮ;ϯsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϴϰŐͬϯ͘ϬŽǌ tĞŝŐŚƚ;ƐƚĚĐŽŶĮŐ͘Ϳ ϭϭϱŐͬϰ͘ϭŽǌ ŽŵƉĂƟďůĞǁŝƚŚŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐ͕h ;ƐĞĞƉĂŐĞϭϲͲϭϴͿĂŶĚǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐ EsƐ;EŝŐŚƚsŝƐŝŽŶĞǀŝĐĞƐͿ͘

Since its introduction in 2007, Aimpoint Micro T-1® has become very popular worldwide due to its size, light weight and robust build quality.

COMPLETE AND READY TO MOUNT The standard conﬁguration of the Micro T-1 contains the sight, a Picatinny mount and bikini rubber lens covers.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

10 11 CUSTOMIZE YOUR SIGHT

The Aimpoint sights can be customized according to your preferences and needs. Several mounts, accessories and spacers are available to meet the demands of your speciﬁc mission and equipment. Custom kits with different mounts, spacers and lens covers are available. If you want to upgrade your sight see page 24-26.

12 COMP™ SERIES SIGHTS

The ﬁrst Aimpoint® Comp sight came out in 1995 and today there are more than 2 million sights from the Comp series in use worldwide. The Aimpoint® Comp series of sights are the toughest sights that Aimpoint has ever produced and they are the standard infantry soldier sight in many NATO countries. These optics are extremely rugged and operate continuously for up to 8 years using a single AA battery. The competition is not even close.

COMPM5/COMPM5s™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϱϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ͕ůŬͬ͘>ŝƚ͘;ϭ͘ϱsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϭϰϴŐͬϱ͘ϮŽǌ;ŽŵƉDϱͿ ϭϲϱŐͬϱ͘ϴŽǌ;ŽŵƉDϱƐͿ tĞŝŐŚƚ;ƐƚĚĐŽŶĮŐ͘Ϳ ϮϯϴŐͬϴ͘ϰŽǌ;ŽŵƉDϱͿ ϮϯϱŐͬϴ͘ϯŽǌ;ŽŵƉDϱƐͿ KƉƟŵŝǌĞĚĨŽƌŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐĂŶĚh;ƐĞĞƉĂŐĞϭϮͲϭϰͿ ĂŶĚĐŽŵƉĂƟďůĞǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐEsƐ;EŝŐŚƚsŝƐŝŽŶĞǀŝĐĞƐͿ͘

Powered by a single AAA battery, and weighing justj 148 g (5.2 oz), the CompM5 takes its place asas the most compact optic in the Aimpoint® Comp™p™ series’ sights.

The CompM5 has a top-mounted battery compartment while the new CompM5s has a low battery compartment – this is the only difference between these two sights.

The CompM5 allows for unlimited eye relief and is optimized for Aimpoint 3XMag-1 and 6XMag-1 magniﬁers and compatible with all generations of Night Vision Devices (NVD).

COMPLETE AND READY TO MOUNT The standard conﬁguration of the CompM5 contains the sight, a LRP mount and a 39 mm spacer. The sight is also equipped with ﬂip-up lens covers, the front lens cover is black and the rear transparent.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

13 NEW!

COMPM5b™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϱϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ͕ůŬͬ͘>ŝƚ͘;ϭ͘ϱsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϭϴϬŐͬϲ͕ϯŽǌ tĞŝŐŚƚ;ƐƚĚĐŽŶĮŐ͘Ϳ ϮϱϰŐͬϵ͕ϬŽǌ

Aimpoint® CompM5b™ allows the user to quickly adjust the position of the reticle to compensate for ballistic drop for the distance to the target. interchangeable turret caps can be adapted for different calibers of ammunition and different target distances. It also offers wind or lead compensation adjustment, and adjustment caps can be tailor-made to meet speciﬁc requirements.

The CompM5b™ is a high performance red dot sight developed to withstand extremely tough handling and environmental situations without adding much weight to the user’s equipment.

The CompM5b™ allows unlimited eye relief and is optimized for Aimpoint 3XMag-1 and 6XMag-1 magniﬁers as well as all generations of Night Vision Devices (NVD). The battery life for the CompM5b™ is over 5 years of conti- nuous use at the pos. 7, more than 1 year of use at pos. 8, and more than 10 years at NVD settings (pos. 1 to 4).

BALLISTIC COMPENSATION • Quickly adjust the reticle in accordance with projectile ballistics and distance to target • Wind compensation adjustment • Tailor-made ballistic caps • Part of the CompM5™ series: • AAA-battery – 5-year battery life • 10 intensity settings – 2 MOA red dot • Rugged design – enclosed system

COMPLETE AND READY TO MOUNT The standard conﬁguration of CompM5b contains the sight, a LRP mount and a spacer to raise the optical axis to 39 mm. The sight is also equipped with ﬂip-up lens covers, the front lens cover is black and the rear transparent.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

14 15 COMPM4/COMPM4s™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϴϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ͕ůŬͬ͘>ŝƚ͘ ;ϭ͘ϱͲϱ͘ϬsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϮϲϴŐͬϵ͘ϱŽǌ tĞŝŐŚƚ;ƐƚĚ͘ĐŽŶĮŐͿ ϯϳϲŐͬϭϯ͘ϯŽǌ ŽŵƉĂƟďůĞǁŝƚŚŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐ͕h;ƐĞĞƉĂŐĞϭϮͲϭϰͿ ĂŶĚǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐEsƐ;EŝŐŚƚsŝƐŝŽŶĞǀŝĐĞƐͿ͘

Standard conﬁguration

Aimpoint CompM4s is the latest version of the U.S. Army´s M68CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. The CompM4 has a top-mounted battery compartment while the CompM4s has a low battery compartment – this is the only difference between these two sights.

COMPLETE AND READY TO MOUNT The standard conﬁguration of the CompM4 series of sights contains the sight (CompM4 or CompM4s), a QRP2 mount and a standard AR15 spacer. These sights also come equipped with a killFlash® anti-reﬂection device and bikini rubber lens covers.

PRO™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϯϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ >ϭͬϯE WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϭϵϮŐͬϲ͘ϴŽǌ tĞŝŐŚƚ;ƐƚĚĐŽŶĮŐ͘Ϳ ϯϲϬŐͬϭϮ͘ϳŽǌ ŽŵƉĂƟďůĞǁŝƚŚŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐ͕h;ƐĞĞƉĂŐĞϭϮͲϭϰͿ ĂŶĚǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐEsƐ;EŝŐŚƚsŝƐŝŽŶĞǀŝĐĞƐͿ͘

Aimpoint® PRO sight comes in a ready-to-go kit at a budget friendly price, a concept that appeals strongly to Law Enforcement units.

COMPLETE AND READY TO MOUNT The PRO sight contains a QRP2 mount and a standard AR15 spacer which can be removed. The sight is also equipped with ﬂip-up lens covers, the front lens cover is black and the rear transparent.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

16 MPS3™

Aimpoint® MPS3 (Multi Purpose Sight) is a passive electronic reﬂex collimator sight designed for use on medium or heavy weapons. Developed primarily formounted weapons opera- tions, the MPS3 is ideal for use on land vehicles, helicopters or fast attack boats and ships.

MPS3™

ŽƚƐŝǌĞ ϮDK ĂƩĞƌǇůŝĨĞ ϴϬϬϬϬŚ ĂƩĞƌǇƚǇƉĞ ͕ůŬͬ͘>ŝƚ͘ ;ϭ͘ϱͲϱ͘ϬsͿ WŽǁĞƌƐǁŝƚĐŚ ZŽƚĂƌǇƐǁŝƚĐŚ tĞŝŐŚƚ;ƐŝŐŚƚŽŶůǇͿ ϲϴϱŐͬϮϰ͘ϮŽǌ tĞŝŐŚƚ;ƐƚĚ͘ĐŽŶĮŐͿ ϭϮϰϱŐͬϰϯ͘ϵŽǌ ŽŵƉĂƟďůĞǁŝƚŚŝŵƉŽŝŶƚΠDĂŐŶŝĮĞƌƐ͕h;ƐĞĞƉĂŐĞϭϮͲϭϰͿ ĂŶĚǁŝƚŚĂůůŐĞŶĞƌĂƟŽŶƐEsƐ;EŝŐŚƚsŝƐŝŽŶĞǀŝĐĞƐͿ͘

MGMOUNT FOR MPS3 Aimpoint® MGMount has been designed speciﬁcally for use with the MPS3. It contains a user friendly 3-step ballistic compensator with preset range adjustments which can be quickly changed by the operator without losing eye contact with the target, even while wearing gloves. The MGMount is compatible with all MIL-STD-1913 Picatinny rails. A separate QD rail adaptor for M2 HMG is also available. Export license/End-user certiﬁcate is required for this product.

More tech details on page 28-30. Speciﬁcations are subject to change without notice.

17 MAGNIFIERS

Aimpoint® magnifiers utilize the red dot in Aimpoint sights as the aiming reticle eliminating the need for re-zeroing when shifting between non-magnified and magnified aiming. The magnifiers are encased in a shock absorbing protective rubber cover that also creates an ideal ergono- mic grip. Internal optical adjustments make aligning the magnifier and sight quick and easy.

3X-C™

Aimpoint® 3X-C was developed for both civilian end user and law enforcement. It can be used in conjunction with all Aimpoint® sights for long-range aiming or observation. A variable (-2 to +2) dioptric setting allows this magni- ﬁer to be adapted to the individual shooter’s eye. The 3X-C can also be used as a handheld 3X monocular.

OPTICAL SYSTEM DĂŐŶŝĮĐĂƟŽŶϯy &ŝĞůĚŽĨǀŝĞǁ;&KsͿ ϲΣ ŝŽƉƚƌŝĐĂĚũƵƐƚŵĞŶƚ цϮ͘Ϭ

PHYSICAL SPECIFICATION (MAGNIFIER ONLY) >ĞŶŐƚŚ ϭϬϯŵŵͬϰ͘ϬŝŶ tĞŝŐŚƚ ϮϮϬŐͬϳ͘ϴŽǌ

3XMAG-1™

The Aimpoint® 3XMag-1 was developed for the professional user that needs a more rugged and military standard proven product. It can be used in conjunction with all Aimpoint® sights for long-range aiming or observation. A variable (-3 to+3) dioptric setting allows this magniﬁer to be adapted to the individual operator’s eye. The 3XMag-1 can also be used as a handheld 3X monocular.

OPTICAL SYSTEM DĂŐŶŝĮĐĂƟŽŶ ϯy &ŝĞůĚŽĨǀŝĞǁ;&KsͿ ϳΣ ŝŽƉƚƌŝĐĂĚũƵƐƚŵĞŶƚ цϯ͘Ϭ

PHYSICAL SPECIFICATION (MAGNIFIER ONLY) >ĞŶŐƚŚ ϭϭϳŵŵͬϰ͘ϲŝŶ tĞŝŐŚƚ ϮϯϬŐͬϴ͘ϭŽǌ

See page 25 for more details on FlipMount and TwistMount options.

18 6XMAG-1™

Aimpoint 6XMag-1 was speciaﬁcally designed for use with the Aimpoint Micro T-2, CompM5, and CompM5s and was developed for the professional user that needs a more rugged and military standard proven product. This modu- le gives professional users enhanced capability for long-range aiming and observation. A variable (-3 to +3) dioptric setting allows the magniﬁer to be adapted to the individual operator’s eye. The 6XMag-1 can also be used as a handheld 6X monocular.

OPTICAL SYSTEM DĂŐŶŝĮĐĂƟŽŶ ϲy &ŝĞůĚŽĨǀŝĞǁ;&KsͿ ϯΣ ŝŽƉƚƌŝĐĂĚũƵƐƚŵĞŶƚ цϯ͘Ϭ

PHYSICAL SPECIFICATION (MAGNIFIER ONLY) >ĞŶŐƚŚ ϭϱϭŵŵͬϱ͘ϵŝŶ tĞŝŐŚƚ ϮϱϬŐͬϴ͘ϭŽǌ

MECHANICAL INTERFACE The Aimpoint® FlipMount can be used with the Aimpoint® magniﬁers and is a quick attach/detach mount that can be quickly ﬂipped in or out of the optical axis. Another recommended mount is the Aimpoint® TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail.

19 CEU™

Aimpoint® CEU (Concealed Engagement Unit) gives the operator the ability to observe and/or engage a threat from a concealed or covered position. The Aimpoint CEU easily rotates from side to side, so an operator can safely look around either right or left-hand corners, over barricades and under vehicles. It can also be quickly removed in order to rapidly return to direct engagement.

MECHANICAL INTERFACE The Aimpoint CEU rotates a full 260° allowing the operator to safely look around either right or left-hand corners, up staircases or down tunnels from almost any angle. To mount the CEU, use the Aimpoint TwistMount base and choose the CEU ring which allows co-witnessing with the Aimpoint sight.

See page 25 for more details about TwistMount and CEU rings.

CEU™

OPTICAL SYSTEM KƉĞƌĂƟŶŐWƌŝŶĐŝƉůĞ ƵĂůŵŝƌƌŽƌƌĞŇĞĐƟǀĞĚĞǀŝĐĞĨŽƌƚƌƵĞƚĂƌŐĞƚǀŝĞǁ͘ DĂŐŶŝĮĐĂƟŽŶ ϭy;ƵŶůŝŵŝƚĞĚĞǇĞƌĞůŝĞĨͿ

PHYSICAL SPECIFICATION (CEU ONLY) ^ŝǌĞ>пtп, ϴϳпϭϭϱпϰϮŵŵͬϯ͘ϰпϰ͘ϱпϭ͘ϳŝŶ tĞŝŐŚƚ ϭϯϱŐͬϰ͘ϴŽǌ DĂƚĞƌŝĂůŚŽƵƐŝŶŐ ,ŝŐŚƐƚƌĞŶŐƚŚ͕ŐůĂƐƐƌĞŝŶĨŽƌĐĞĚ͕WWƉŽůǇŵĞƌ͕ ďůĂĐŬ͕ŶŽŶͲŐůĂƌĞĮŶŝƐŚ

ENVIRONMENTAL SPECIFICATIONS dĞŵƉĞƌĂƚƵƌĞZĂŶŐĞ;^ƚŽƌĂŐĞͿ ͲϰϱΣƚŽнϳϭΣͬͲϱϬΣ&ƚŽнϭϲϬΣ& dĞŵƉĞƌĂƚƵƌĞZĂŶŐĞ;KƉĞƌĂƟŽŶͿ нϱΣƚŽнϳϭΣͬнϰϭΣ&ƚŽнϭϲϬΣ& tĂƚĞƌƌĞƐŝƐƚĂŶĐĞ ϮϱŵͬϴϮŌ͘

20 21 ACCESSORIES

Flip-uplipi up FronFrontt Cover Flip-up Rear Cover Flip-up Front Cover Flip-up Rear Cover For PRO & For PRO & Transparent Transparent Comp sights* Comp sights* For PRO & For PRO & * * Item No. 12223 Item No. 12224 Comp sights Comp sights Item No. 12241 Item No. 12240

Flip-up Front Flip-up Rear Flip-Up Front Cover Cover Cover with Flip-up ARD For MPS3 Transparent Transparent (closed & open) For MPS3 Item No. 200101 For PRO & Comp sights* Item No. 200102 Item No. 200122 For older models an adapter is needed to mount the rear cover.

ARD ARD ﬁlter for PRO & Comp sights* Flip-up Rear Flip-up Front Flip-up Front Item No. 12239 Cover Transparent Cover Transparent Cover For Micro T-2 & For Micro T-2 & For Micro T-2 & CompM5 sights. CompM5 sights. CompM5 sights. Item No. 200192 Item No. 200193 Item No. 200191

Rubber Bikini Lens Polarization Filter Flip-Up Front Cover with Flip-up ARD Cover For Micro T-1 Polarization Filter (closed & open) For PRO & Comp sights* for reduction of sun Item No. 12204 Item No. 12462 reﬂection. Fits rear of PRO & Comp sights* Item No. 12216

Flip-Up Front Cover with Flip-up ARD Rubber Bikini Lens Cover Transparent (closed & open) Lens Cover For PRO and CompM3 For Micro T-2 & CompM5 sights. For CompM4 mounted with Quick Release Item No. 200195 Item No. 12205 Item No. 12228

* Please note that this does not include the CompM5

22 AAA Battery Alkaline Outer Rubber Cover Outer Rubber Cover Double Battery Kit For CompM5, Color: Dark Earth Color: Black For PRO & CompM5s and Brown Fits CompM3 CompM3 CompM5b Fits CompM3 and PRO and PRO Item No. 12247 Item No. 12242 Item No. 12225 Item No. 12226

AA Battery Alkaline DL1/3N Lithium CR 2032 CR 1225 For CompM4 and Battery 10 pcs Lithium Battery Lithium Battery MPS3 For PRO & CompM3 For Micro sights For Acro sights Item No. 12242 Item No. 10903 Item No. 12211 Item No. 13851

Aimpoint® Tool Item No. 12207

23 MOUNTING SOLUTIONS

QRP2 Mount QRW2 Mount LRP Mount Quick Release Picatinny Quick Release Weaver Lever Release Picatinny (MIL-STD 1913) Mount. Mount for CompM4, PRO Mount for CompM4, PRO For CompM4, PRO and and Ring Base & Top. Return and Ring Base & Top. Return Ring Base & Top. Return to zero after dismounting to zero after dismounting. to zero after dismounting (Spacer is necessary for M4 Screws, Allen key and thread (Spacer is necessary for M4 flat top rifles and carbines). sealer included. flat top rifles and carbines). Item No. 11758 * Item No. 12198 Item No. 12195 *

TNP Mount Standard Spacer Extension Spacer Torsion Nut Picatinny Spacer for CompM4 Spacer for CompM4 (MIL-STD 1913) Mount and PRO. and PRO. for CompM4, PRO and Spacer raises height of Spacer raises height of Ring Base & Top. optical axis from 30 to optical axis from 30 to 39 Item No. 12197 * 39 mm. mm and brings sight 40 Item No. 12192 * mm forwards. Item No. 12193 *

Ring Base & Top QRP3 Mount SRW-L Ring For PRO. Base and Top Quick Release Low Wide Ring, 30 30 mm ring. Picatinny (MIL-STD mm Black, for Fits QRP2, QRW2, LRP 1913) Mount 30 Comp sights. and TNP Mounts. mm. For CompM3. Fits on Weaver and Picatinny rail. Item No. 12194 * Item No. 12923* Item No. 12244 *

NEW!W!

Micro LRP Mount Micro 11 mm Spacer 39 mm Dovetail Mount Lever Release Spacer for Aimpoint® Picatinny Mount for Micro For Micro and CompM5 CompM5s sights only and CompM5 sights. sights. Fits most of the 11 Optical centre will be 39 Return to zero after mm Dovetail Bases mm on top of rail dismounting. Screws, ranging from 10-12,5 mm Incl. screws, tool Aimpoint Tool and thread Screws and Aimpoint Tool and thread lock sealer included. included. Item No. 200662 Item No. 12905 Item No. 12215

24 Micro Spacer 30 mm Micro Spacer 33 mm Micro Spacer 39 mm For Micro and CompM5 For Micro and CompM5 For Micro and CompM5 sights. Raises height of sights. Raises height of sights. Raises height of optical axis to 30 mm. Four optical axis to 33 mm. Four optical axis to 39 mm for screws (torx), Aimpoint Tool screws (torx), Aimpoint Tool cowitness with AR-15. Four and thread sealer included. and thread sealer included. screws (torx), Aimpoint Tool and thread sealer included. Item No. 12357 Item No. 200348 Item No. 12358

CEU High Rise Ring CEU Low Rise Ring Ringng Ring for CEU. Fits on Ring for CEU. Fits on Low Wide Ring, 30 TwistMount Base. 39 mm TwistMount Base. 30 mm mm Black, for height of optical axis. height of optical axis. Comp sights. Fits on Weaver and Item No. 12203 Item No. 12202 Picatinny rail. Item No. 200286 *

Mount Adapter 30 mm Mount Adapter 34 mm Spacer For mounting Micro sights For mounting Micro sights Spacer for Ring Base & on magnifying scopes with on magnifying scopes with Top and TwistMount Ring. 30 mm tube. 34 mm tube. Raises height of optical axis from 30 to 39 mm. Item No. 200152 Item No. 200153 Item No. 12227 *

TwistMount Base TwistMount TwistMount Ring Separate base for Twist- Complete Quick Release Separate ring for Mount Fits on Picatinny Mount for 3XMag and CEU. TwistMount. rail (MIL-STD 1913). Fits on Picatinny rail. Item No. 12238 * (MIL-STD 1913) Item No. 12236 Item NNo. 12234 *

FlipMountFlip Item No. 200250 Item. No. 200251 (30 mm height of (39 mm height of optical axis) optical axis)

A quick attach/detach mount that can be quickly ﬂipped in or out of the optical axis. For Aimpoint magniﬁers or other optical equipment with a 30 mm tube. Micro tool included.

* Screws and Allen key included 25 MOUNTING SOLUTIONS FOR ACRO P-1™

NEW!NEW! NEW!NEW!

Acro Adapter Plate for Acro Rear Sight Adapter Acroo Rear SightSight AdapterAdapter PlatePla Micro Interface Plate for Glock for Beretta APX The Acro adapter plate For mounting Acro sights For mounting Acro sights on allows for compatibility with on Glock handguns without Beretta APX handguns without all Micro sights mounting the optic ready system. the optic ready system. solutions. Item No. 200622 Item No. 200614 Item. No. 200526

Acro Adapter Plate for RMR Interface For mounting Acro sights on RMR interface. NEW! Item No. 200602

Acro Rear Sight Adapter Plate for CZ For mounting Acro sights on CZ Shadow 1, 2 andnd CZ P10 handguns without with NEW! the optic ready system. Item No. 200663

Additional Acro adapter plates available for optic ready handguns only:

Acro Adapter Plate for Glock MOS For mounting Acro sights on optic ready Glock MOS handguns. Item. No. 200520 Acro Adapter Plate for HK SFP9 For mounting Acro sights on optic ready HK SFP handguns. Item no. 200521 Acro Adapter Plate for CZ P-10 For mounting Acro sights on optic ready CZ P-10 handguns. Item no. 200522 Acro Adapter Plate for S&W M&P9 For mounting Acro sights on optic ready Smith & Wesson M&P9 handguns. Item no. 200523 Acro Adapter Plate for Beretta APX For mounting Acro sights on optic ready Beretta APX handguns. Item no. 200524 Acro Adapter Plate for Sig Sauer P320/M17 For mounting Acro sights on optic ready Sig Sauer P320/M17 handguns. Item no. 200525 Acro Adapter Plate for Sig Sauer X5 For mounting Acro sights on optic ready Sig Sauer X5 handguns. Item no. 200576 Acro Adapter Plate for CZ Shadow 2 QR For mounting Acro sights on optic ready CZ Shadow 2 OR handguns. Item no. 200577 Acro Adapter Plate for Walther Q5 Match For mounting Acro sights on optic ready Walther Q5 Match handguns. item no. 200578 Acro Adapter Plate for FNX-45 Tactical For mounting Acro sights on optic ready FNX-45 Tactical handguns. item no. 200579 Acro Adapter Plate for Silencerco Maxim 9 For mounting Acro sights on optic ready Silencerco Maxim 9 handguns. item no. 200580

New plates will come, for updated information please see www.aimpoint.com

26 27 TECHNICAL SPECS

SPECIFICATION ZKWͳϭ D/ZK dͳϮ D/ZK dͳϭ

DotDo size 3,5 MOA ϮDK ϮDKK ͬϰ DK

DŽƌĞƚŚĂŶ ϭ͘ϭ ϱǇĞĂƌƐ A ϱϬϬϬϬϬϬŚA ĂƩĞƌǇůŝĨĞ ŽĨƵƐĞĂƚ ƐĞƫŶŐϲ ϱϬϬϬϬŚ ĂƩĞƌǇůŝĨĞ DŽƌĞƚŚĂŶϴǇĞĂƌƐ ϱϬϬϬϬϬŚ ϱϬϬϬϬϬŚ ;ŽŶĂŶǇEsƐĞƫŶŐͿ ŽĨƵƐĞĂƚƐĞƫŶŐϭͲϰ

ĂƩĞƌǇƚǇƉĞ ZϭϮϮϱ;ϯsͿ ZϮϬϯϮ;ϯ sͿ ZϮZ ϬϯϮ;ϯsͿ

WŽǁĞƌƐǁŝƚĐŚ WƵƐŚďƵƩŽƩ ŶƐ ZŽƚĂƌǇƐǁŝƚĐŚ ZŽƚĂƌǇ ƐǁŝƚĐŚ

EŝŐŚƚsŝƐŝŽŶ ĞǀŝĐǀ Ğ;EsͿ 4 4 4 ƐĞƫŶŐƐŶ ĂǇĂ ůŝŐŚƚ;>Ϳ ϲ 8 8 ƐĞƫĞƫŶŐƐŐƐ Ϯϱŵ Ϯϱŵ Ϯϱŵ tĂƚĞƌƌĞƐŝƐƚĂŶĐĞ 8ϮŌŌ͘ 8ϮŌ͘ ϴϮŌ͘ ϭϯϯ ŵŵĂƚ ϭϬϬŵ ϭϯϯŵŵ ĂƚϭϬϬ ŵ ĚũƵƐƚŵĞŶƚϭĐůŝĐŬŬ с ϭϳŵŵŵ ĂƚϭϬϬ ŵ Ϭ͘ϲŝŶ ĂƚϭϬϬǇĚƐ Ϭ͘ϱϬ ŝŶĂƚϭϬϬǇĚƐ Ϭ͘ϱ ŝŶ Ăƚ ϭϬϭ ϬǇĚƐ

^ŝǌĞ>пtп, ϰϳпϯϬпϯϬŵŵ ϲϴпϰϭп ϯϲϯ ŵŵŵ ϲϭпϰϭпϯϲŵŵ ;ƐŝŐŚƚŽŶůǇͿ ϭ͘ϵϵпϭ͘Ϯпϭ͘ϮŝŶ Ϯ͘ϳпϭ͘ϲ п ϭ͘ϰ ŝŶ Ϯ͘ϰпϭ͘ϲпϭ͘ϰϰ ŝŶ

tĞŝt ŐŚƚ ϲϬŐ ϵϲŐ ϴϲŐ ;ƐŝŐŚƚŽŶůǇͿ Ϯ͘ϭŽǌ ϯ͘ϰŽǌ ϯ͘Ϭ Žǌǌ

ŝŬŬŝŶŝŝ ůĞŶƐĐŽǀĞƌƐ >ĞŶĞ ƐĐŽǀĞƌƐ &ůŝƉͲƵƉůĞŶƐĐŽǀĞƌƐ ;ƐƚĚĐŽŶĮŐ͘Ϳ Ͳ ;ĐĂŶŶŽƚďĞĮƩĞĚ ǁŝƚŚ ŇŝƉͲƵƉůĞŶƐĐŽǀĞƌƐͿ

MAGNIFIFIERS ϯyͳ ϯyD'ͳϭ ϲyD'ͳϭ

DĂŐŶŝĮĐĂƟƟŽŶŽ 3XX 3X 6X

&ŝĞůĚŽĨǀŝĞǁ;&KsͿ 6° 7°7 3°3

ŝŽƉƚƌŝĐĂĚũũƵƐƚƐƚŵĞŶƚ ± 2.0 D ± 3.00 D ±±3 3.00 D

Ϭ͘ϱϱŵ Ϯϱŵ Ϯϱŵ tĂƚĞƌƌĞƐŝƐƚĂŶĐĞ ϭ͘ϲ Ō͘͘ ϴϮϴϮ Ō͘ ϴϮŌ͘ Size L × W × H ϭϬϯϬϯ пп ϰϱϰϱ пϰϰϱŵŵ ϭϭϳпϰϲпϰϯŵϯŵŵ ϭϱϭ пп ϰϲпϰϰϯϯŵŵ ;ŵĂ;ŵ ŐŶŝĮĞƌƌ ŽŶůǇͿ ϰп ϭ͘ϳпϳ ϭ͘ϳŝŶ ϰ͘ϲпϭ͘ϴ ппϭ͘ϳ ŝŶ ϱ͘ϵ п ϭ͘ϴϭ пϭ͘ϳ ŝŶ

tĞŝŐŚƚŐŚ 22020 g 230 g 250 g ;ŵĂŐŶŝĮĞƌ ŽŶůǇͿ

DĞĐŚĂŶŝĐĂůŝŶƚĞƌĨĂĐĞ TϯϬTϯ ŵŵ ƌŝŶŐŶ TϯϬTϯ ŵŵ ƌŝƌ ŶŐ TϯϬϬ ŵŵ ƌŝŶŐ

DŽƵŶƟŶŐŽƉƟŽŶƐ • dǁŝƐƚDŽƵŶƚ • dǁŝƐƚDŽƵŶƚ • dǁŝƐƚDŽƵŶƚ • &ůŝƉDŽƵŶƚ • &ůŝƉDŽƵŶƚ • &ůŝƉDŽƵŶƚ

28 COMPM5b COMPM5 COMPM4 PRO MPS3 COMPM5s COMPM4s ϮDK ϮDϮDK ϮDϮDK ͬϰͬ DK ϮDK ϮDK

ϱϬϬϬϬŚ B ϱϬϬϬϬ Ś B ϴϬϬ ϬϬϬϬϬ ŚC ϯϬϬϬϬŚ B ϴϬϬϬϬ Ś C

ϱϬϬ ϬϬϬŚ ϱϬϬ ϬϬϬŚϬ ϱϬϬ ϬϬϬŚ ϱϬϬ ϬϬϬŚϬ ϱϬϬϬϬ ϬϬϬŚ

͕ůŬͬ͘>ŝƚ͘ ͕ůŬͬ͘>ŝƚ͘ ͕ ůŬͬ͘>ŝƚ͘ >ϭͬϯE ;ϯ sͿ ͕ůŬͬ͘>>ŝƚ͘ŝ ;ϭ͘ϱsͿ ;ϭ͘ϱ sͿ ;ϭ; ͘ϱͲϱ͘ϬsͿ ;ϭ͘ϱͲϱ͘ϬsͿs ZŽƚĂƌǇ ƐǁǁŝƚĐŚ ZŽƚĂƌǇǇ ƐǁŝƚĐĐŚ ZŽƚŽƚĂƌǇ ƐǁŝƚĐŚ ZŽƚĂƌǇĂƌ ƐǁŝƚĐŚ ZŽƚŽƚĂƌǇ ƐǁƐ ŝƚĐĐŚ

4 4 7 4 7

ϲ ϲ 9 ϲ 9

ϰϱŵ ϰϱŵ ϰϱ ŵ ϰϱϱ ŵ ϭŵ ϭϰϳŌ͘ ϭϰϳŌ͘ ϭϰϳ Ō͘Ō ϭϰϳ Ō͘ ϯŌ͘ ϭϬϭ ŵŵĂƚϭϬϬŵ ϭϬŵŵŵŵ ĂƚϭϬϬ ŵ ϭϲŵŵŵ ĂƚϭϬϬ ŵ ϭϲϭϲ ŵŵŵŵ Ăƚƚ ϭϬϬ ŵ ϱϬŵŵ ĂĂƚϭϬϬŵ Ϭ͘ϰŝŶĂƚϭϬϬǇĚƐ Ϭ͘ϰ ŝŶĂƚϭϬϬǇϬǇĚƐ Ϭ͘ϲϲŝŶĂƚϭϬϬǇĚƐ Ϭ͘ϲ ŝŶ Ăƚ ϭϬϬǇĚƐ ϮŝŶĂƚϭϭϬϬ ǇĚƐ COMMPM5: ϴϯпϰϬпϰϭŵŵ ϴϯпϰϵпϵ ϰϵϵ ŵŵŵ ϯ͘ϯпϭ͘ϲпϭ͘ϲ ŝŶŶ ϭϮϮϮ пп ϱϯϱϯ пϱϱϵϵŵŵ ϭϮϮ пϰϵ пϰϵŵŵ ϭϳϭϳϱ пϴϰпϴϭŵŵ ϯ͘ϯϯ пϭ͘ϵпϭ͘ϵϵ ŝŝŶ COMPM5M5S: ϰ͘ϴ пϮ͘ϭпϮ͘ϯŝŶ ϰ͘ϴϴ пϭ͘ϵ п ϭ͘ϵϭ͘ ŝŶŶ ϲ͘ϴ п ϯ͘ϯ пϯ͘Ϯϯ ŝŶ ϴϯпϰпϰϬпϰϴ ŵŵ ϯ͘ϯпϭ͘ϲпϭ͘ϵϵ ŝŶ COMMPM5: ϭϴϬŐ ϭϰϴϭϰ ŐͲϱ͘ϮŽǌ Ϯϲϴ Ő ϭϵϮϭϵ Ő ϲϴϱŐ ϲ͘ϯŽǌ COMPM5S: ϵϵ͘ϱŽǌ ϲ͘ϴ Žǌǌ Ϯϰ͘ϮŽǌ ϭϲϱŐͲϱ͘ϴϴ Žǌ ŝŬŝŶŝ ůĞŶƐŶ ĐŽǀǀĞƌƐĞƌ ŝŬŝŶŝůĞŶƐĐŽǀĞƌƐ &ůŝƉͲƵƉ ƉůĞŶƐĐŽǀĞƌƐ &ůŝƉͲƵƉůĞŶƐĐŽǀĞƌĞƌƐ ;&ůŝƉŝƉͲƵƉůĞŶƐĐŽǀĞƌƐ &ůŝƉͲƵƉůůĞŶƐ ĐŽǀĞƌƐ ;&ůŝŝƉͲƵƉůĞŶƐĐŽǀĞƌƐ ĂǀĂǀĂŝůĂůĂďůĞďů Ϳ ĂǀĂŝůĂďůĞͿ

BATTERY LIFE A: At setting 8 (room temperature) B: At setting 7 (room temperature) C: At setting 12 (room temperature)

DOT SIZE (MOA) MOA (minute of angle) 1 MOA ≈ 30 mm at 100 meters ≈ 1 in at 100 yards.

WARRANTY INFORMATION Aimpoint values your business and always attempts to provide you the very best of products and services. That’s why we back our products with one of the best guarantees in the industry. Our products are guaranteed to be free from original manufacturer defects in material and/or work- manship under normal use from the date of purchase for two (2) years for professional users.

CUSTOMER SERVICE & DEALERSHIP ELIGIBILITY For dealership eligibility and information about customer service, please scan the code or follow the link.

www.aimpoint.com/contact www.aimpoint.com/products/where-to-buy/

29 GENERAL TECHNICAL DATA s 2 T-2 T-1 -1 pM5 pM4 pM4 p 3 ro ro o P m Acr Com Mic Mic Com Com Co PRO MPS

APPLICATION AREAS Laww Enforcemc ent - Armed Forcesce - Special Units - APPLICATION FIREARMS Pistolo /revolver - - - - - ĂĂƌďŝŶŝŶĞͬƚĂĐƟĐĂů ƌŝŇĞ - PDWDW (personal defence weapoap n)) - LMG (light machine gun) - - - MMG (mediumm machinh e gun) - - HMG (heavy machhine gun) ------primmary use secondarda y use - not recommended

FEATURES FOR ALL AIMPOINT RED DOT SIGHTS

TEECHHNOLOGY • Working principle: ReR flex collimator sight - red dot sight OPPTIT CAL DATA • LED (Light Emitting Diode) totto ally eye-e-safe • Light source wave length, 650 nm red light • Absence of parallax - No centering reqequirered • Unlimited eye relief • Anti-reflex coating all surfaces & multii-layer coating objective lenss • No magnification (1X)

MECHANICAL DATA • Material housing and tube, high strength aluminium • Surface ﬁnish housing, anodized, semi-matte • Black color housing

ENVIROR NMENTAAL DAD TA • Temperature range -45 °C to +71 °C (-50 °F to +160 °F) • Submersible, for more details see page 18 • No radioactive material used • No laser emission

Speciﬁcations are subject to change without notice.

30 SPEED… MEET ACCURACY

In summary, Aimpoint’s breakthrough technology allows you to do what comes naturally – shoot with both eyes open while remaining focused on the target. When you look through an Aimpoint® sight, a red dot appears in the lens. When the red dot is on target, so are you, with no centering required.

It is this inherent combination of simplicity, speed, and accuracy that makes Aimpoint sights the preferred choice for beginners and experts alike. Get on target fast, and forget about being challenged by bad light or moving targets. Aimpoint AB Jägershillgatan 15 SE- 213 75 Malmö, Sweden Phone +46 (0)40 671 50 20 Fax +46 (0)40 21 92 38 E-mail: [email protected]

www.aimpoint.com

Available at: www.aimpoint.com/catalogs

Photographers: Richard King, Tom Weber, Henri Kokko, S Albers,, Peter Ozberg, Bigdomphoto.com This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB All rights reserved. ©2020 Aimpoint AB. Art. No. M03285