AA PrimerPrimer forfor Other ZINSSER Problem Solvers...

EveryEvery Job...Job... Bulls Eye 1-2-3 ® DEEP TINT

- Water-Base Deep Tint Primer-Sealer Recommended B-I-N • Interior and exterior Stain Cover AllCoat 1-2-3 Applications B-I-N • Tintable to mid-to-deep colours INTERIOR SURFACES • Seals and tones the surface Drywall EEEE • Improves coverage of deep colour topcoats Plaster (1) GEGE • Use under or over any oil or water-base Limewash/Lime Plaster NRENRE • Recoat in 1 hour New Trim/Doors EGEE Plywood GGEE Brick NRENRNR Concrete (1) GEGG ® Galvanised New (3)/Old NRENRG B-I-N The Ultimate Performance Aluminium/Stainless Steel GEGG -Base Primer-Sealer Plastisol® EEEE • The ultimate stain killer – blocks stains from Fibreglass/GRP NRENRNR water, smoke, fire damage and more Glossy /Glass EEEE • The ultimate new wood sealer- seals knots & sap streaks /Woodstain ENRNRNR • Blocks odours permanently and completely BullBullss EyeEye 112323 Clear Finishes EGGG • Sticks to glass, metal, tile and other glossy Wood Panelling/Laminates EGGG surfaces without sanding Ceramic Tile GEGG • Lightning fast dry – recoat in 45 minutes Formica® EGGG • Great under or over any topcoat Wallcovering (non porous) EEEE * Available in handy 390ml aerosol Powder EEEE AllAll SurfaceSurface •• AllAll PurposePurpose Acoustic Tiles NREEE EXTERIOR SURFACES COVER STAIN® Cedar & Redwood *GE* Water-BaseWater-Base PrimerPrimer Plywood *GE* Oil-Base Primer-Sealer Stain Killer Bond Coat Pressure Treated Wood *EE* • Interior and exterior Brick *ENR* • Blocks cedar & redwood bleed Concrete/Stucco *EG* • Use for fire, smoke & water damage Great hide Glossy Paints/Glass *EE* • Sticks to all surfaces without sanding Galvanised New (3)/Old *ENR* • Fast drying – recoat in 2 hours Great adhesion without sanding Aluminum/Stainless Steel *EG* * 350 VOC Formula Wrought Iron/Cast Iron/Copper *NRE* Superior stain blocking Lead/Asbestos *ENR* PVC *EG* Mould & mildew resistant Powder Coatings *EE* Allcoat Stain Killer STAINS & ODOURS Multi-Surface Primer & Finish Great for high pH surfaces Tannin Bleed E*NREE* • High Hiding Stain Blocker Knots & Sap E*NRNRNR Great under or over any paint • Oil performance without the odour E*EGG* • Kills stains from water, graffiti, ink, crayon Smoke & Fire Damage E*NREE* Fast 1 hour recoat time • Sticks to all surfaces without sanding Water Damage E*NREE* • Non-yellowing, dries flat, sands easily Nicotine/Tobacco GNREE* • Dries in 30 minutes. Recoat in 2 hours Mildew/Mould Stains (2) E*NREE* Pet Stains E*NREE* Asphalt/Grease E*ENRNR Tar/Bitumen NRENRNR Creosote E*GNRNR Odour Sealing E*NRNRNR Lipstick/Crayon E*EGG*

E=Excellent (best recommendation) G=Good (may be used on this surface) NR=Not Recommended NOTES: * Use B-I-N for spot priming on exterior surfaces www.zinsseruk.com 1) Allow new plaster/cement & stucco to cure 60-90 days before . 2) Use Blackfriar Fungicidal Wash to remove mould/mildew before priming. 3) Degrease new galvanisedsteel with methylated spirit before priming.

READ INSTRUCTIONS ON PRODUCT CONTAINER FOR FURTHER INFORMATION Great For All Interior Sur faces… Superior Stain Blocking Bulls Eye 1-2-3® is great for new and pr eviously painted dr ywall, Performance plaster, wood, metal, vinyl, PVC, fibr eglass, masonry - any Bulls Eye 1-2-3 permanently and interior surface. Made with ZINSSER’s unique pr oprietary completely seals graf fiti, grease GENERIC TYPE: 100% acrylic water-base primer-sealer acrylic resins for exceptional flexibility and durability, Bulls Eye spots, tar or asphalt - even light water stains - inside and out! RECOMMENDED FOR: 1-2-3 has great hide and can be tinted towar d the colour of the Interior topcoat to eliminate one coat of paint. It’s a gr eat base coat ZINSSER’s unique stain-blocking New or previously painted dr ywall, plaster, wood (pine, fir, resins trap tannins from cedar cedar, redwood, plywood), metal (aluminium, iron, steel, for decorative finishes - can be used under or over ANY oil or stainless steel, galvanised metal), vinyl, PVC, fibr eglass, and redwood in the primer film to masonry (stucco, concrete & brick). latex paint. You’ll never stop to change primers when you use prevent stains from bleeding Exterior through the topcoat. New or previously painted wood (pine, fir, cedar, redwood, Bulls Eye 1-2-3. It’s the “all in one can” primer . T1-11, plywood, pressure treated ). Asbestos shingles, glass, metal (aluminium, iron, steel & galvanised metal), PVC, aluminium and vinyl siding, fibreglass and masonry (stucco, concrete, HardiPlank ® & brick). APPLICATION DATA: Mould & Mildew Brush, roller or pad: Nylon, polyester or blend …And All Exterior Sur faces! Resistant Primer Film Airless Spray: .015” – .017” tip @ 2000 – 2500 psi Bulls Eye 1-2-3 is extr emely Conventional Spray: Bulls Eye 1-2-3 is the “go to” primer for binding chalky exterior Thin to 10% - clean water effective at preventing the growth Spray @ 50 - 90 psi surfaces like aluminium, vinyl or pr eviously painted siding or of mould & mildew on the primer Practical Spread Rate: trim. It outper forms conventional oil-base primers, cr eating a 10m2 per litre film, extending the life of the paint Application Conditions: flexible/breathable film that resists blistering, peeling, cracking job. It’s great for high-humidity 100 – 320C / <85% RH Dry Time (240C / 50%RH): & chipping so the topcoat looks gr eat for years! And it seals areas like bathrooms, kitchens, Touch: 35 min. off tannin in cedar siding do it won’ t bleed through your paint. basements - or when priming new Recoat: 1 hr construction or refinishing projects Stain sealing: 2 hrs, cedar 24hrs It’s great for masonr y, metal, fibreglass, hardboard, PVC, Full scrape cure: 7 days in humid conditions. Tinting: Up to 16ml Universal Colourant per litre weathered wood, pressure treated lumber, T1-11 siding - any USE 123 DEEP TINT FOR MID/DEEP-TONE COLOURS outdoor surface. CLEANUP: Clean applications tools with warm water and liquid Rust Inhibitive Formula- detergent or household cleaner . If dried on tools use a Great For New Metal heavy-duty houselhold cleaner and rinse with water. TECHNICAL DATA: Great Adhesion Without Sanding Great Hide Over Dark Colours Bulls Eye 1-2-3 resists flash Solids by weight: 50.5% rusting in its “wet” state - and Solids by volume: 34.0% Bulls Eye 1-2-3 has legendar y bond coat Bulls Eye 1-2-3 has gr eat hide. It provides rust resistance for the Density: 1.26 kg/l Viscosity Range: 100 – 110 KU adhesion. It sticks to oil-base enamels, completely blocks previous colours - life of the coating. It dries to a Theoretical Spread Rate clear finishes, Formica®, PVC, ceramic tile even dark colours - so they won’t smooth, tight, water resistant @ 1 mm DFT: 13.2m2 per litre - even glass - without tedious sanding, show through your new paint. No film that’s great for iron railings, Gloss @ 60o/3 day cure: 23% (satin) steel doors, metal panels, duct Enamel holdout: 1.0% gloss change saving time, mess and expense. W ith matter how vibrant or subtle your new Wet adhesion: Pass 2000 cycles Bulls Eye 1-2-3, just clean and prime - paint colour, it will look better and work, galvanised gutters - any Flexibility/7 day cure and you’re ready to paint! last longer if you prime with Bulls Eye interior or exterior metal sur face. (1/4” Mandrel): Pass/5A Flame spread 1-2-3 first. (ASTM-84-97A): 5, Class 1 Smoke contribution (ASTM-84-97A): 0, Class 1 Flash Point (ASTM D3278): >82oC Max VOC: 30 g/l Great Basecoat for Freeze/thaw stable: Yes Faux Finishes LIMITATIONS: Bulls Eye 1-2-3 has superior Not recommended for floors or decks or sur faces subject to immersion or prolonged contact with water . These Seals Porous Surfaces sealing qualities and great hold limitations are not to be construed as all-inclusive. out, making it an outstanding Drywall, builder’s flat, wood, plaster, base coat for any decorative masonry & brick are no match for the or faux finish pr oject - sealing properties of Bulls Eye 1-2-3! It ragging, frottage, marbling, wood seals porous surfaces for a more even graining - even under a metallic colour and sheen and of fers exceptional finish. And when tinted, it enamel holdout. Plus, it’s gr eat for high pH eliminates the need for a first surfaces like concrete, stucco, plaster and coat of paint. fast set joint & textur e compounds.