Celestica

A8440 4U 4 PROCESSOR SCSI SYSTEM FEATURES

• Industry-standard 4-way • Two LSI Logic SCSI Ultra 320 capable 4U server, based on channels 32/64-bit AMD Opteron™ - one internal/ one external processors • Two Broadcom gigabit • Full performance 32-bit x86 ports computing with a seamless • Two 64-bit/133MHz PCI-X upgrade to 64-bits (hot plug) slots • AMD-8100™ with • Three 64-bit/66 MHz PCI slots VSP Model A8440 servers feature award-winning HyperTransport™ technology AMD Opteron™ processors to allow for impressive • One PCI 32-bit small form • Supports up to 16 DIMMs of 32-bit x86 performance and a seamless upgrade to factor slot for video card DDR266 - DDR333 ECC regis- 64-bit computing. This rack-optimized, 4U platform tered SDRAM with bank or node • IPMI v1.5 server management is ideal for Internet infrastructure, high perform- interleave controller with dedicated 10/100 ance cluster nodes and data center environments. Ethernet management port This thoroughly tested platform is designed to • Up to three hot swap 500 Watt power supplies with 2+1 • Slimline DVD-ROM and enable system builders and OEMs to quickly bring redundancy Floppy Drive a 4-way 32-bit/64-bit server to market. The Validated Server Program design provides the relia- • Four 1” hot swap SCSI drive • USB 1.1 bility, availability, scalability and performance bays with U320 SCSI capable • Redundant required in today’s marketplace. In addition, SAF-TE cooling fans Celestica offers comprehensive service and support to enable rapid adoption of this platform. Celestica BENEFITS

Hardware All peripheral and I/O buses connect to the CPU’s HyperTransport links. Each AMD-8131™ PCI-X Tunnel The A8440 server leverages the high performance provides dual PCI-X 1.0 bridges (supporting 133MHz, architecture of AMD Opteron™ processors and the 100MHz, 66MHz, and legacy-PCI speeds) with up to AMD-8100™ series chipset to create a scalable 4-way/ five masters per bridge. 4U platform with three distinct advantages: The AMD-8111™ I/O Hub supports the lower bandwidth • AMD64 architecture – allows for 32-bit x86 applica- peripherals and buses including an EIDE bus, PCI version tions to run natively at full speed with a low impact 2.2 bus, and USB 1.1 host bus. The LPC bus interface upgrade path to 64-bit performance connects peripherals, including the Super I/O, BIOS and • Integrated memory controller – offers dedicated memory baseboard management controller (BMC). bandwidth to each CPU. Eliminates the need to share a The A8440 features dual ultra320 SCSI channels with common front-side bus with I/O and memory accesses both an internal connector for the SCSI backplane and like some other CPU architectures. an external connector routed to the back of the chassis. • HyperTransport™ Technology – a next generation chip The LSI Logic controller features integrated ARM micro- interconnect technology that reduces I/O bottlenecks processors to offload SCSI I/O functions from the host and allows for “glueless” CPU interconnect CPU. SCSI bandwidth is up to 320MB/s per channel. Code for the SCSI controller is maintained in the main BIOS. The AMD Opteron processor integrates an AMD64 core, 128-bit memory controller, and three 16-bit The Broadcom BCM5704 controller provides dual copper HyperTransport links into a 940-pin package. Each CPU support routed to the back of the chas- has dedicated banks of memory (See Figure 1) to enable sis. These ports are backwards compatible with low-latency access. The CPUs are interconnected with 10/100Mb Ethernet. coherent HyperTransport links that are designed to ensure cache coherency. Celestica BENEFITS

Manageability Software

The embedded baseboard management controller provides VSP servers include the necessary software to get the management of the system board including configuration, server running quickly. This package includes drivers for the embedded SCSI controller, network interface con- addressing, asset information, hardware health monitor- trollers and server management software. ing and system event log. Advanced features enable remote management of the host system including fault OSA Technologies’ comprehensive OSA Server Manager software is included to allow administrators to locally or recovery and BMC firmware updating. All functions are remotely monitor the health and utilization of their IPMI designed to be compatible with the Intelligent Platform v1.5 server platforms. A graphical user interface (GUI) Management Interface (IPMI) version 1.5 specification. console monitors such critical system parameters as CPU utilization, memory usage, events and sensors, as well as Supported Features: other system functions. In addition, administrators can • Remote systems monitoring shutdown processes, reset run time monitors (watch dog - health timers), and remotely power down platforms via - CPU utilization intranet/Internet connections (SSL encryption supported). - memory usage - sensors Utilities: • Remote server control and server down management - system power up/down • Flash utilities for BIOS and BMC Firmware - system reset - access to system configuration, status, asset tag information - remote diagnostics

• Failure Alerts: - power supplies - processors - Voltage Regulator Modules (VRMs) - fans Celestica

TECHNICAL FEATURE SETS

Processors AMD Opteron™ 800 series processors (up to 4-way) with integrated DDR memory controller

Chipset AMD-8131™ HyperTransport™ PCI-X Tunnel (2 Devices) AMD-8111™ HyperTransport I/O Hub

Memory Supports up to sixteen (16) DIMMs of registered ECC SDRAM (DDR200, DDR266, DDR333) at four (4) DIMMs per processor (not included)

Expansion Slots I/O – Six (6) total slots available Two (2) PCI-X 64-bit, 133MHz slots (hot plug) Three (3) PCI 64-bit, 66MHz slots (not hot plug) One (1) PCI 32-bit, 33MHz small form factor slot (front side video)

Storage Chassis supports up to four (4) one-inch Ultra 320 SCSI drives SCSI backplane supports hot swap in RAID configurations One (1) low profile DVD-ROM drive One (1) low profile floppy drive

Storage Controller LSI Logic LSI53C1030 Ultra-320 SCSI controller with one (1) internal and one (1) external connector (rear mounted)

Network Controller Ethernet ports (rear mounted): One (1) Broadcom BCM5704 Dual 10/100/1000 (copper interface, two (2) connectors) One (1) 10/100 Ethernet port

Management Controller Q-Logic Zircon UL baseboard management controller (BMC) remote server management supporting IPMI v1.5 with dedicated Ethernet port (rear mounted)

I/O Winbond W83627HF Super I/O

Interface PS/2 mouse and keyboard connectors (front mounted) USB port (front mounted) One (1) video port - when small form factor video card is installed (front mounted) System and reset buttons (front mounted) Indicators: power, drive activity, Ethernet activity, fault status (front mounted) One (1) external ultra SCSI 320 port (rear mounted) One (1) RS-232 serial port (rear mounted)

Power Up to 2+1 redundant power with hot-swap 500W power supplies (rear mounted)

Mechanical 19” rackmount 4U design with removable bezel and carrying handles Dimensions: Width: 17.5 inches, Height: 6.97 inches, Depth: 25.5 inches Celestica

FIGURE 1: A8440 BLOCK DIAGRAM Celestica

Specifications Ordering Information The base level configuration for the A8440 platform provides System Power Supply one (1) power supply, VRM and thermal solutions to enable two Input: 85 - 264 VAC, 47 - 63Hz input, (2) processors. auto-switching A8440-SCSI, 2P Capable Output: 500W nominal • CLS Part # V019174A-001 Packaging (Shipping Box) 1 x A8440 barebones 4U chassis Height, Width, Depth: 18.3 inches, 24.5 inches, 1 x A8440 32.25 inches 2 x CPU heat sink Weight: ~90 lb 2 x CPU VRM 2 x DDR VRM Environmental 1 x ATI Rage XL PCI adapter Operating Temperature: 10 to 35ºC ambient 1 x DVD-ROM drive Storage Temperature: -30 to 60ºC ambient 1 x floppy drive Operating Humidity: 20 to 80%RH (non-condensing) 4 x SCSI drive carriers Operating Vibration: 0.5G, < 400Hz 1 x 500 watt power supply Operating Shock: 5G with pulse duration of 10ms 1 x power cord Operating Altitude: 0 - 9,500 feet 1 x set of rack-mount rails Regulatory 1 x driver and apps CD (server/managment,IPMI) EMI and RFI: FCC Part 15J Class A, 16 x memory slots Ices-003 (Canada) Class A, VCCI Class A, UL950, EN60950 A8440-SCSI, 4P Capable

Safety : EN55022 Class A, EN55024, • CLS Part # V019174A-002 EN61000-3-2, EN61000-3-3, • A8440 2P with upgrade kit and additional power supply EN60950, CSA950, UL1950, IEC60950, CUL60950 Power Supply

Quality • CLS Part # V019174U-002 > 35,000 hours MTBF (calculated) 1 x 500 watt power supply Min load AFR 25% < max load AFR 39% 1 x Power Cord Worldwide regulatory/safety/EMC * At least two (2) power supplies are required to support more Warranty and Support than two (2) CPUs Three year limited warranty on workmanship and materials * Three (3) power supplies are required for redundancy

Upgrade Kit, from 2P-4P Capable

• CLS Part # V019174U-001 2 x CPU heat sink 2 x CPU VRM 2 x DDR VRM Celestica

Celestica Sales and Customer Service North America 1-866-350-6686 Europe +44 (0) 1952 230 415

Celestica Service and Support North America 1-866-258-8475 Europe +44 (0) 1952 230 415 For all regions outside of North America and Europe please use the North American phone numbers. For Validated Server Program information and to register go to: http://www.amd.com/vsp

© Copyright 2003 Celestica Inc. All rights reserved. Celestica is a trademark of Celestica Inc. AMD, the AMD Arrow logo, AMD Opteron, and combinations thereof, AMD-8100, AMD-8111, and AMD-8131 are trademarks of Advanced Micro Devices, Inc. HyperTransport is a licensed trademark of the HyperTransport Technology Consortium. Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.