DOCSLIB.ORG

Full Product Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Full Product Catalog Full Product MFIMASS FINISHING, INC. Catalog A leading manufacturer of industrial finishing machines and supplies. 1060 Commerce Blvd Howard Lake, MN 55349 Mass Finishing, Inc. is a 100% employee www.massfin.com owned company. It is part of Innovance, a holding company for a family of industrial [email protected] manufacturing businesses. 1(888) 260-6277 1 Marci Theisen GENERAL MANAGER Marci started working for Mass Finishing in 1996 when the company was located in Delano, MN. Her role in the company as the business manager includes handling all of the accounting, purchasing, shipping and managing the day to day operations. In 2018 she took on the General Manager title with the retirement of company co-founder Mike Mathisen. Tommy Mathisen DIRECTOR OF SALES, LAB ENGINEER Tommy worked for a company called Time Savers in their deburring and polishing division. In 1995 he and his brother Mike bought the rights to the division from Time Savers. Their new company was called Mass Finishing, Inc. or just MFI. With more than 30 years in the finishing and polishing industry and thousands of sample projects completed, he is one of the foremost experts in the field. 1060 Commerce Blvd Howard Lake, MN 55349 Mass Finishing, Inc. is a 100% employee www.massfin.com owned company. It is part of Innovance, a holding company for a family of industrial [email protected] manufacturing businesses. 1(888) 260-6277 Table of MFIMASS FINISHING, INC. Contents HZ-Series Pages 4-13 CENTRIFUGAL BARREL FINISHERS RF-Series Pages 14-15 CENTRIFUGAL DISC FINISHERS Media and Compound Pages 16-25 TUMBLING MEDIA AND ADDITIVES Vibratory Pages 26-27 BOWL AND TUB FINISHERS CENTRIFUGAL BARREL FINISHERS HZ-12 HZ-40 HZ-60 HZ-85 HZ-120 HZ-160 HZ-220 HZ-330 CENTRIFUGAL DISC FINISHERS VIBRATORY TUB FINISHERS MEDIA AND SUPPLIES 3 3 Entry Level MFIMASS FINISHING, INC. HZ-Series CENTRIFUGAL BARREL FINISHERS Special Features: Compact Size- The small footprint of the HZ-12 and HZ-40 make them easy to fit into most productions without sacrificing any finishing speed or results. The large caster wheels on the HZ-12 base make it easy to maneuver around the production facility. Removable Barrels- The HZ-12 and HZ-40 come standard with four removable barrels. The HZ-40 features four barrel options making it extremely versatile. By purchasing a second set of barrels, the operator can reload while the other set is running. Variable Frequency Control- With the ability to control the speed of the tumble, the operator can polish and achieve finer finishing at low speeds. Higher speeds, 225 to 250 RPM, allow for aggressive deburring and edge radiusing. HZ-12CENTRIFUGAL BARREL FINISHER Safe and Easy Operation- The integral hood switch and two-button HZ-40CENTRIFUGAL BARREL FINISHER jog requirement makes the HZ-12 and HZ-40 extremely safe to operate. The Specifications HZ-12 HZ-40 hood is securely locked during cycles. Main Motor HP 1 HP 3 Timers and industrial switches and controls make running the machine Voltage 120 230/460 Volt simple. Total Capacity 12 Liters 1.4 Cu. Ft. Shipping Weight 700 lbs. 1280 lbs. Isotropic Finishing- The finish Overall Dimensions LxWxH 32”x31”x55” 47”x38”x49” achieved by centrifugal barrel Max RPM 250 225 tumbling machines is isotropic. This means the surface is consistent in all Barrel Options directions unlike hand polishing. 2 Sided Barrels (Can use dividers) - 8.75"x5.75” Bolted End Barrels (High Pressure) - 11"x5.875" Latched End Barrels (Highest Capacity) 8.375”x5” 12.5”x6.875” Two Half Barrels (8 Total) - 5.375"x6.875" 1060 Commerce Blvd Howard Lake, MN 55349 Mass Finishing, Inc. is a 100% employee www.massfin.com owned company. It is part of Innovance, a holding company for a family of industrial 4 [email protected] manufacturing businesses. 4 1(888) 260-6277 How it Works Centrifugal barrel finishing machines barrel. This motion causes parts operate on the “Ferris Wheel” and media to contact each other principle with a one-to-one ratio in random or isotropic directions. of barrel rotation to turret rotation. The resulting finish is consistent Each of the four barrels is loaded across the entire surface of the part. to roughly 50-80% full of media, MFI provides complete sample parts, water, and compound. During processing, and stocks all required operation, rotation of the turret media and supplies. creates a sliding force inside the FOUR BARREL OPTIONS (HZ-40 Only) Bolted-End Latched-End Two-Sided Half-Latched Featured Accessory Optional Accessories Media and Parts Separating Electronic Hoist Media Drain System Basket Manual Media Processing Table with PSA-FS 1660 Separator Kit Sludge Tank5 5 Mid-Size MASS FINISHING, INC. HZ-Series MFI CENTRIFUGAL BARREL FINISHERS Special Features: Full Size Production- The HZ-60 and HZ-85 provide more than double the capacity and efficiency over the compact centrifugal barrel tumblers like the HZ-12 and HZ-40. Wide Barrels- The HZ-60 features a 25.75 inch wide barrel and the HZ- 85 barrel is 33.5” wide. They can be divided to create several chambers inside each of the four barrels. This is a critical feature when part-on-part impingement needs to be avoided. Variable Frequency Control- With the ability to control the speed of the tumble, the operator can polish and achieve finer finishing at low speeds. Higher speeds, up to 225 RPM, allow for aggressive deburring and edge radiusing. Safe and Easy Operation- The integral hood switch and two-button HZ-85CENTRIFUGAL BARREL FINISHER jog requirement makes the HZ-60 extremely safe to operate. The hood is securely locked during cycles. A built HZ-60CENTRIFUGAL BARREL FINISHER in cover lift with industrial timers and Specifications HZ-60 HZ-85 switches make running the machine simple. Main Motor HP 5 7.5 Barrel Rotation Motor HP 1.15 1.15 Isotropic Finishing- The finish Voltage 230/460 230/460 achieved by centrifugal barrel tumbling machines is isotropic. This means the Total Capacity 2 Cu. Ft. 3 Cu. Ft. surface is consistent in all directions Shipping Weight 3000 lbs. 3300 lbs. unlike hand polishing. Dimensions LxWxH 68"x39"x94" 75"x39"x94" Barrel Length/Diameter 25.75"x5.875" 33.5"x6" Max RPM 225 225 1060 Commerce Blvd Howard Lake, MN 55349 Mass Finishing, Inc. is a 100% employee www.massfin.com owned company. It is part of Innovance, a holding company for a family of industrial 6 [email protected] manufacturing businesses. 6 1(888) 260-6277 How it Works Centrifugal barrel finishing machines barrel. This motion causes parts operate on the “Ferris Wheel” and media to contact each other principle with a one-to-one ratio in random or isotropic directions. of barrel rotation to turret rotation. The resulting finish is consistent Each of the four barrels is loaded across the entire surface of the part. to roughly 50-80% full of media, MFI provides complete sample parts, water, and compound. During processing, and stocks all required operation, rotation of the turret media and supplies. creates a sliding force inside the HZ-60 and 85 Features Integral Hood Latch Cycle Timer and RPM Meter PLC Option Lid Lifting Available System Featured Accessory Optional Accessories Media and Parts Separating PLC Control System Barrel Dividers System Processing Table with Drain Pan Sludge Tank7 7 Full-Size HZ-Series MFIMASS FINISHING, INC. CENTRIFUGAL BARREL FINISHERS Special Features: Full Size Production- The HZ-120 and HZ-160 provide more than double the capacity and efficiency over the compact centrifugal barrel tumblers like the HZ-12 and HZ-40. Deep Barrels- The HZ-120 and 160 feature a deeper barrels for wider parts. The barrels can be divided to create several chambers inside each of the four barrels. This is a critical feature when part-on-part impingement needs to be avoided. Variable Frequency Control- With the ability to control the speed of the tumble, the operator can polish and achieve finer finishing at low speeds. Higher speeds, up to 150 RPM, allow for aggressive deburring and edge radiusing. Safe and Easy Operation- The integral hood switch and two-button jog requirement makes the HZ-120 and HZ-160 extremely safe to operate. The HZ-160 hood is securely locked during cycles. CENTRIFUGAL BARREL FINISHER HZ-120 A built in cover lift with industrial CENTRIFUGAL BARREL FINISHER timers and switches make running the Specifications HZ-120 HZ-160 machine simple. Main Motor HP 10 15 Isotropic Finishing- The finish Barrel Rotation Motor HP 2 2 achieved by centrifugal barrel tumbling 230/460 230/460 machines is isotropic. This means the Voltage surface is consistent in all directions Total Capacity 4.7 Cu. Ft. 7.1 Cu. Ft. unlike hand polishing. Shipping Weight 2900 lbs. 3500 lbs. Dimensions LxWxH 71"x57"x75" 74"x57"x75" Barrel Length/Diameter 17.25"x10.25" 20.75"x12" Max RPM 150 150 1060 Commerce Blvd Howard Lake, MN 55349 Mass Finishing, Inc. is a 100% employee www.massfin.com owned company. It is part of Innovance, a holding company for a family of industrial 8 [email protected] manufacturing businesses. 8 1(888) 260-6277 How it Works Centrifugal barrel finishing machines barrel. This motion causes parts operate on the “Ferris Wheel” and media to contact each other principle with a one-to-one ratio in random or isotropic directions. of barrel rotation to turret rotation. The resulting finish is consistent Each of the four barrels is loaded across the entire surface of the part. to roughly 50-80% full of media, MFI provides complete sample parts, water, and compound.
Load more

Recommended publications
  • Manufacturing Glossary
    MANUFACTURING GLOSSARY Aging – A change in the properties of certain metals and alloys that occurs at ambient or moderately elevated temperatures after a hot-working operation or a heat-treatment (quench aging in ferrous alloys, natural or artificial aging in ferrous and nonferrous alloys) or after a cold-working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but never involves a change in chemical composition of the metal or alloy. Abrasive – Garnet, emery, carborundum, aluminum oxide, silicon carbide, diamond, cubic boron nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure blasting, and other operations. Each abrasive particle acts like a tiny, single-point tool that cuts a small chip; with hundreds of thousands of points doing so, high metal-removal rates are possible while providing a good finish. Abrasive Band – Diamond- or other abrasive-coated endless band fitted to a special band machine for machining hard-to-cut materials. Abrasive Belt – Abrasive-coated belt used for production finishing, deburring, and similar functions.See coated abrasive. Abrasive Cutoff Disc – Blade-like disc with abrasive particles that parts stock in a slicing motion. Abrasive Cutoff Machine, Saw – Machine that uses blade-like discs impregnated with abrasive particles to cut/part stock. See saw, sawing machine. Abrasive Flow Machining – Finishing operation for holes, inaccessible areas, or restricted passages. Done by clamping the part in a fixture, then extruding semisolid abrasive media through the passage. Often, multiple parts are loaded into a single fixture and finished simultaneously. Abrasive Machining – Various grinding, honing, lapping, and polishing operations that utilize abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or other material.See grinding.
    [Show full text]
  • Enghandbook.Pdf
    785.392.3017 FAX 785.392.2845 Box 232, Exit 49 G.L. Huyett Expy Minneapolis, KS 67467 ENGINEERING HANDBOOK TECHNICAL INFORMATION STEELMAKING Basic descriptions of making carbon, alloy, stainless, and tool steel p. 4. METALS & ALLOYS Carbon grades, types, and numbering systems; glossary p. 13. Identification factors and composition standards p. 27. CHEMICAL CONTENT This document and the information contained herein is not Quenching, hardening, and other thermal modifications p. 30. HEAT TREATMENT a design standard, design guide or otherwise, but is here TESTING THE HARDNESS OF METALS Types and comparisons; glossary p. 34. solely for the convenience of our customers. For more Comparisons of ductility, stresses; glossary p.41. design assistance MECHANICAL PROPERTIES OF METAL contact our plant or consult the Machinery G.L. Huyett’s distinct capabilities; glossary p. 53. Handbook, published MANUFACTURING PROCESSES by Industrial Press Inc., New York. COATING, PLATING & THE COLORING OF METALS Finishes p. 81. CONVERSION CHARTS Imperial and metric p. 84. 1 TABLE OF CONTENTS Introduction 3 Steelmaking 4 Metals and Alloys 13 Designations for Chemical Content 27 Designations for Heat Treatment 30 Testing the Hardness of Metals 34 Mechanical Properties of Metal 41 Manufacturing Processes 53 Manufacturing Glossary 57 Conversion Coating, Plating, and the Coloring of Metals 81 Conversion Charts 84 Links and Related Sites 89 Index 90 Box 232 • Exit 49 G.L. Huyett Expressway • Minneapolis, Kansas 67467 785-392-3017 • Fax 785-392-2845 • [email protected] • www.huyett.com INTRODUCTION & ACKNOWLEDGMENTS This document was created based on research and experience of Huyett staff. Invaluable technical information, including statistical data contained in the tables, is from the 26th Edition Machinery Handbook, copyrighted and published in 2000 by Industrial Press, Inc.
    [Show full text]
  • An Investigation of the Surface Finishing Action and Resulting Surfaces Produced by the Cascade Finishing Process Peter Charles Brust Iowa State University
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1997 An investigation of the surface finishing action and resulting surfaces produced by the Cascade Finishing process Peter Charles Brust Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Industrial Engineering Commons, and the Mechanical Engineering Commons Recommended Citation Brust, Peter Charles, "An investigation of the surface finishing action and resulting surfaces produced by the Cascade Finishing process " (1997). Retrospective Theses and Dissertations. 11777. https://lib.dr.iastate.edu/rtd/11777 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. INFORMATION TO USERS This manuscript has been reproduced from the microfilm master. UME films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter &ce, while others may be from ai^ type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMl a complete manuscript and there are missing pages, these will be noted. Also, if unauthorized copyright material had to be removed, a note will indicate the deletion.
    [Show full text]
  • Environmental Protection Agency Pt. 438, App. B
    Environmental Protection Agency Pt. 438, App. B MISCELLANEOUS METAL PRODUCTS Miscellaneous Fabricated Wire Products Miscellaneous Metal Work Miscellaneous Repair Shops & Related Services Miscellaneous Transportation Equipment APPENDIX B TO PART 438—OILY (1) Alkaline cleaning is performed to re- OPERATIONS DEFINITIONS move foreign contaminants from parts. This operation usually is done prior to finishing NOTE: The definitions in this appendix (e.g., electroplating). shall not be used to differentiate between the (2) Emulsion cleaning is an alkaline clean- six ‘‘core’’ metal finishing operations (i.e., ing operation that uses either complex Electroplating, Electroless Plating, Anod- chemical enzymes or common organic sol- izing, Coating (chromating, phosphating, and vents (e.g., kerosene, mineral oil, glycols, coloring), Chemical Etching and Milling, and and benzene) dispersed in water with the aid Printed Circuit Board Manufacture) and of an emulsifying agent. The pH of the sol- forty ‘‘ancillary’’ process operations listed at vent usually is between 7 and 9, and, depend- 40 CFR 433.10(a). ing on the solvent used, cleaning is per- Abrasive Blasting involves removing surface formed at temperatures from room tempera- ° ° film from a part by using abrasive directed ture to 82 C (180 F). This operation often is at high velocity against the part. Abrasive used as a replacement for vapor degreasing. blasting includes bead, grit, shot, and sand Alkaline Treatment Without Cyanide is a blasting, and may be performed either dry or general term used to describe the application with water. The primary applications of wet of an alkaline solution not containing cya- nide to a metal surface to clean the metal abrasive blasting include: Removing burrs on surface or prepare the metal surface for fur- precision parts; producing satin or matte fin- ther surface finishing.
    [Show full text]
  • Forgings, Castings and Additive Manufactured Components Introduction
    Surface Finishing Applications we redefine Forgings, Castings and Additive Manufactured Components Introduction Why Choose Us? We’re the UK’s We’re a family run business that pride ourselves on working as a strong, unified team of specialists. leading experts in We believe in British Born in the United Kingdom, we are unique in our product design providing effective and the manufacture of our specialist machines and consumables. We’re here for you Being based in the heart of the country means we and efficient processes, have easy access to all of our clients. We have experience With five decades of experience and knowledge in and solutions, for the the finishing industry, we know what works for you. We provide options manufacturing industry. We have an impressive range of media and compounds to choose from, including one of the best polishing compounds in the market. We also provide a wide range of machinery and subcontract services to meet all of your needs. we redefine: We go the extra mile We’ll tailor our services to your needs, not the other Vibratory Finishing way round. Our service is all about you. High Energy Finishing Consumables Precision Polishing Subcontract Services 2 3 Mass Finishing What is Mass Finishing? Man x Machine x Media = M3 Mass finishing is a process that The aim of this process can vary based on the type of application, which include: Almost all manufactured components have automates the mechanical and experienced some surface improvement, high stock removal chemical finishing of various deburring to ensure that these are in an acceptable shaped parts.
    [Show full text]
  • Centrifugal Iso-Finishing
    MECHANICAL CENTRIFUGAL ISO-FINISHING New Challenges with 3D-Printed Parts Metal parts manufactured using various additive manufac- turing technologies present a new and entirely different set of challenges for surface finishers. Unlike with conventional manufacturing technologies, additive manufacturing does not produce parts with substantial burrs, which are by-products of cutting or metal-forming operations. Printed parts also are free of the non-isotropic machining or grinding patterns common to subtractive operations that can have negative effects on part wear and fatigue resistance. In many cases, however, 3D printing does produce unaccept- ably rough surfaces on parts, and this poses severe challenges for many mechanical surface finishing methods. Sometimes the surfaces of printed parts rival those of unfinished casted parts in terms of their initial surface roughness and positive skew. High-energy finishing methods are required to produce accept- able surface finishes with process cycle times that won’t be a Centrifugal iso-finishing can produce very refined surface source of bottlenecks or production constraints. finishes on parts in abbreviated process cycle times. (Image courtesy of Cole Mathisen, MFI.) A High-Speed, High-Energy Alternative Centrifugal iso-finishing is a high-speed and high-intensity mass finishing method in which abrasive or polishing mate- rials are caused to interact with part edges and surfaces with 10 times the surface pressure of low-energy finishing methods. What this means, in practical terms, is that it is possible to produce very refined surface finishes in abbre- viated process cycle times. It also means that parts with complex and detailed geometries can be deburred with a minimum of manual intervention.
    [Show full text]
  • Chemical Accelerator Mass Finishing Stainless Steel Deburring
    CLINIC MASS FINISHING pfonline.com/experts Chemical Accelerator Mass Finishing and can we use vibratory methods Q. We manufacture hardened steel gears of all types and sizes. for our requirements?– J.K. We have a vibratory machine, but it’s been ineffective in A. You have three finishing require- smoothing our grinding lines. Can you recommend a vibra- ments: deburring, refinishing and tory or mass finishing process?– H.P. refining an existing finish. These A. We recommend a chemical accelerator process in your are all excellent applications vibratory machine. The machine must have a precise flow- for vibratory/mass finishing. through soap compound system, and coated or stainless Let’s define the two drains. Chemical accelerator finishing processes can be finishing specifications accomplished in vibratory, high-energy centrifugal disc, (2B and #8) and then spindle and drag finishing systems. The process produces discuss the vibratory super surface refinement (in the 2-to-4-Ra finish range) and process solutions. keeps edge radiusing to a minimum. Finish Specification: Chemical accelerators (oxalic acid, phosphates or citric Stainless steel finishes acids) are metered into and carried by a cutting or non- have been standardized cutting, high-density (110 to 140 lbs per cu ft), preformed by the Stainless Steel media. The accelerator chemical continuously oxidizes the Sheet Manufacturers surface of iron-based and some non-ferrous metal alloys, Association. Two of the enabling the high-density ceramic media to remove metals standard finishes are PAT WENINO / M.C. Finishing at much higher rates. The accelerator system cuts, refines, the 2B and #8. Below [email protected] and brightens surfaces within the same machine and media.
    [Show full text]
  • Critical Mass
    Critical Mass By Dr. LaRoux K. Gillespie Courtesy of Rosler Metal Finishing USA A six-load, centrifugal disc mass-finishing system from Rosler features automatic loading and auto screening. Mass finishing parts at the machining center offers economic advantages. There are major economic and scheduling advantages to having a part come off a machining center complete. Most machinists think parts are finished at this point because part dimensions are correct. However, they forget that most parts must be deburred, cleaned, weighed or counted and then packaged before shipping. In most shops, that involves moving the machined parts to another part of the shop, putting them on shelves and eventually having someone perform the final operations prior to shipment. Done at the Machine Deburring parts at the machine means that they are truly ready to ship. Joe Gaser, vice president of Osborn International, Cleveland, a manufacturer of industrial brushes and surface finishing tools, noted that manufacturers would obviously like to receive payment for their parts earlier than they do. His solution: “Finish your parts at the machine instead of having them sit for days or weeks waiting to be deburred.” There are other benefits to finishing parts at a machining center. Shops find and fix problems earlier, better understand the impact of keeping burrs small, prevent mistakes from using the wrong finishing process, do not lose parts, and possibly prevent oils from drying on parts, which makes the oils difficult to remove. In addition, one person is responsible for the completed part. There are three major ways of producing a burr-free part at the machine: preventing and minimizing burrs, brush deburring during the machine cycle, and cellular manufacturing that includes deburring.
    [Show full text]
  • The Leader in Small Mass Finishing About Us Raytech®
    The Leader in Small Mass Finishing About Us Raytech® WHO WE ARE Through strong and innovative engineering, Raytech is clearly the leader in today’s demanding marketplace. Raytech products are sold through specialized distributors around the world. We are confident in the superior quality of our products and would like to instill some of this confidence in the people who use them. OUR VISION Whether you make castings, stampings, or fabrications or you want to process gemstones, Raytech has a machine to suit your application. Raytech is the world’s leader in the manufacturing of small mass finishing equipment and accessories. We hold all of our equipment to the highest quality standards. In this catalog you will see Raytech’s full product offering. Each machine will deburr, finish, burnish, and perform many other applications. They are task-oriented and designed to provide another tool in your tool box. OUR MISSION Raytech’s mission is manufacturing excellence: serving industry, science, and craftsmen. OUR HISTORY Founded in 1958 in Stafford Springs, Connecticut, Raytech began as any small business does, with hard work and a dedication to supplying the highest quality products to craftsmen and hobbyists. In 1987, Raytech joined forces with Lyman Products Corporation, enhancing the manufacturing capabilities and product lines. For more than 60 years, Raytech Industries has continued this mission of manufacturing excellence. In more recent years, Raytech has enhanced this tradition by meeting the demands of industrial users and professional
    [Show full text]
  • 1 Mass Finishing
    News from the surface technology Mass Finishing | Shot Blasting | Engineering | Environmental Technologies Mass Finishing Shot Blasting Rösler News Page 2 – 5 Page 6 – 9 Page 10 – 12 1 MASS FINISHING EDITORIAL Innovative consumables for optimized finishing solutions Better and more efficient mass finishing processes Not moving forward is actually a step back – Following this mantra, Rösler is constantly working to optimize its media and compounds to further improve the process stability, cost efficiency and productivity of mass finishing processes. Due to an increasing customer demand, Rösler is excited The utilization of such sophisticated dosing systems has to introduce its new “Y-range” of media - a plastic media helped improve the process controls, which has resulted type with the grinding characteristics of ceramic media, in achieving desired finishing results with less personnel. The managing directors of the Rösler Oberflächentechnik GmbH: Volker Löhnert, Stephan Rösler, Frank Möller (f.l.t.r) which does not chip and will also minimize the risk of work New developments can also be reported from the field piece damage. This is a unique and frequently requested of wastewater cleaning with recycling systems. Granular We are happy to report that our business divisions combination, a challenge in which Rösler has met head pellets are replacing the powder products which have are currently operating near capacity to meet the on with developing this new range of media. Featuring been used up to this point for flocculation and high demand we have experience throughtout a special composition, these plastic grinding media have improvement of sludge consistency. Granular flocculants 2018. Frequently, this poses challenges on the the same grinding and metal removal characteristics as have several advantages: They allow optimized handling procurement side of our business.
    [Show full text]
  • Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry
    inventions Article Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry Mikdam Jamal 1 and Michael N. Morgan 2,* ID 1 The Manufacturing Technology Centre Ltd., Ansty Park, Coventry CV7 9JU, UK; [email protected] 2 Advanced Manufacturing Technology Research Laboratory (AMTREL), Faculty of Engineering and Technology (FET), Liverpool John Moores University, Liverpool L3 3AF, UK * Correspondence: [email protected]; Tel.: +44-(0)151-2312590 Received: 11 August 2017; Accepted: 6 December 2017; Published: 13 December 2017 Abstract: Metal additive manufacturing (AM) is increasingly used to create complex 3D components at near net shape. However, the surface finish (SF) of the metal AM part is uneven, with surface roughness being variable over the facets of the design. Standard post-processing methods such as grinding and linishing often meet with major challenges in finishing parts of complex shape. This paper reports on research that demonstrated that mass finishing (MF) processes are able to deliver high-quality surface finishes (Ra and Sa) on AM-generated parts of a relatively complex geometry (both internal features and external facets) under select conditions. Four processes were studied in this work: stream finishing, high-energy (HE) centrifuge, drag finishing and disc finishing. Optimisation of the drag finishing process was then studied using a structured design of experiments (DOE). The effects of a range of finishing parameters were evaluated and optimal parameters and conditions were determined. The study established that the proposed method can be successfully applied in drag finishing to optimise the surface roughness in an industrial application and that it is an economical way of obtaining the maximum amount of information in a short period of time with a small number of tests.
    [Show full text]
  • Mass Finishing
    Mass Finishing 1 Rösler provides total finishing solutions CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Rösler Oberflächentechnik GmbH Hausen 1, 96231 Bad Staffelstein, Germany Vorstadt 1, 96190 Untermerzbach, Germany has established and applies an Energy Management System for Bad Staffelstein: Development and production of When it comes to surface finishing, Rösler is known to offer complete, well-engineered process consumables for the vibratory technology Untermerzbach: Development, production and sale of machines, installations and consumables for solutions. Based on our comprehensive knowledge of mass finishing and shot blasting technologies, the vibratory and shot-blasting technology. An audit was performed, Report No. 70010098. Proof has been furnished that the requirements according to we can provide our customers with practically unlimited finishing solutions. In our state-of-the- ISO 50001:2011 are fulfilled. The certificate is valid from 2016-11-28 until 2018-12-08. Certificate Registration No.: 12 340 10167 TMS. art test lab, we conduct meaningful test trials to develop the optimum finishing processes for our CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH Product Compliance Management Munich, 2016-12-01 certifies that customers because only complete solutions yield the best results. We are not simply offering specific Rösler Oberflächentechnik GmbH Hausen 1, 96231 Bad Staffelstein, Germany surface finishing processes but we are also supply perfectly matched auxiliary
    [Show full text]