FuelPHP
About the Tutorial
FuelPHP is an open source web application framework, designed for developers who need a simple and elegant toolkit to create full-featured web applications. The development of FuelPHP started in 2010 and it was initially developed by a small team of Philip Sturgeon, Harro Verton, Jelmer Schreuder, and Dan Horrigan.
This tutorial introduces you to FuelPHP framework and makes you comfortable with its various components.
Audience This tutorial has been prepared for professionals who are aspiring to make a career in FuelPHP framework. This will give you enough understanding on how to create and develop a website using FuelPHP.
Prerequisites We assume that the readers of this tutorial have a basic knowledge of HTML, PHP, the fundamental concepts of Object-Oriented Programming.
Copyright & Disclaimer Copyright 2017 by Tutorials Point (I) Pvt. Ltd.
All the content and graphics published in this e-book are the property of Tutorials Point (I) Pvt. Ltd. The user of this e-book is prohibited to reuse, retain, copy, distribute or republish any contents or a part of contents of this e-book in any manner without written consent of the publisher.
We strive to update the contents of our website and tutorials as timely and as precisely as possible, however, the contents may contain inaccuracies or errors. Tutorials Point (I) Pvt. Ltd. provides no guarantee regarding the accuracy, timeliness or completeness of our website or its contents including this tutorial. If you discover any errors on our website or in this tutorial, please notify us at [email protected]
i
FuelPHP
Table of Contents
About the Tutorial ...... i
Audience ...... i
Prerequisites ...... i
Copyright & Disclaimer ...... i
Table of Contents ...... ii
1. FUELPHP ─ INTRODUCTION ...... 1
FuelPHP ─ Features ...... 1
FuelPHP ─ Advantages ...... 2
2. FUELPHP ─ INSTALLATION ...... 3
System Requirements ...... 3
Command Line Installation ...... 4
Composer-based Installation ...... 7
3. FUELPHP ─ ARCHITECTURE OVERVIEW ...... 10
4. FUELPHP – SIMPLE WEB APPLICATION ...... 13
Structure of the Application ...... 15
Add a Controller ...... 15
Routing ...... 16
5. FUELPHP ─ CONFIGURATION ...... 17
Overview ...... 17
Type of Configuration Format ...... 17
Environment ...... 18
ii
FuelPHP
6. FUELPHP ─ CONTROLLERS ...... 20
Controller Methods ...... 20
before( ) Method ...... 21
after( ) Method ...... 22
Extending Controllers ...... 23
Generate Controller ...... 23
Type of Controllers ...... 23
7. FUELPHP ─ ROUTING ...... 25
8. FUELPHP ─ REQUESTS & RESPONSE...... 28
Request ...... 28
Response ...... 29
Methods ...... 30
9. FUELPHP ─ VIEWS ...... 33
forge ...... 33
auto_filter ...... 33
set_filename ...... 34
set ...... 34
get ...... 35
render ...... 35
Create a View ...... 35
Passing Data to View ...... 36
View Filter ...... 37
Nested views ...... 38
Template Controller ...... 39
Generate View Page ...... 41
iii
FuelPHP
10. FUELPHP ─ PRESENTERS ...... 43
11. FUELPHP ─ MODELS & DATABASE ...... 45
Creating a Model ...... 45
Access a Model...... 45
Database Overview ...... 46
Database Configuration...... 46
DB-based Toolkit ...... 46
DB API ...... 48
Query API ...... 50
Query Builder API ...... 53
Orm Toolkit ...... 57
Working Example ...... 62
12. FUELPHP ─ FORM PROGRAMMING ...... 67
Form...... 67
Input Class ...... 70
Working Example ...... 73
13. FUELPHP ─ VALIDATION ...... 77
14. FUELPHP ─ ADVANCED FORM PROGRAMMING ...... 80
Fieldset ...... 80
Working Example ...... 83
15. FUELPHP ─ FILE UPLOADING ...... 90
Configuration ...... 90
Upload Methods ...... 90
Working Example ...... 92
iv
FuelPHP
16. FUELPHP ─ AJAX ...... 95
17. FUELPHP ─ HMVC REQUEST ...... 99
18. FUELPHP ─ THEMES ...... 100
Theme Configuration ...... 100
Theme Class ...... 101
Working Example ...... 104
19. FUELPHP ─ MODULES ...... 109
Module Configuration ...... 109
Module Namespace ...... 109
Module Structure ...... 110
20. FUELPHP ─ PACKAGES ...... 111
Creating Packages ...... 111
Installing Packages ...... 112
Using Packages ...... 112
21. FUELPHP ─ COOKIE & SESSION MANAGEMENT ...... 114
Cookies ...... 114
Methods ...... 115
Session ...... 116
Session Methods ...... 116
22. FUELPHP ─ EVENTS ...... 118
System Events ...... 118
Event Methods ...... 120
v
FuelPHP
23. FUELPHP ─ EMAIL MANAGEMENT ...... 121
Configuration ...... 121
Email API ...... 121
24. FUELPHP ─ PROFILER ...... 127
Enable Profiling ...... 127
Profiler Information ...... 127
Profiler Class ...... 128
25. FUELPHP ─ ERROR HANDLING & DEBUGGING ...... 129
Error Handling ...... 129
Debugging ...... 130
26. FUELPHP ─ UNIT TESTING ...... 132
PHPUnit...... 132
Creating Unit Tests ...... 132
Run Test ...... 133
27. FUELPHP ─ COMPLETE WORKING EXAMPLE ...... 134
vi
FuelPHP 1. FuelPHP ─ Introduction
FuelPHP is an open source web application framework. It is written in PHP 5.3 and implements HMVC pattern. HMVC is Hierarchical Model-View-Controller framework that allows to sub-request the controller, which returns the partial page such as comments, menus, etc., instead of the complete page as in normal MVC.
FuelPHP is created with a desire to incorporate best practices from frameworks such as CodeIgniter and Kohana with improvements and ideas of its own. FuelPHP database migration tool and scaffolding functionalities are inspired by the popular Ruby on Rails framework.
FuelPHP leverages the power of command line through a utility called "Oil". The utility is designed to help speed up development, increase efficiency, testing, debugging, and HTML support.
FuelPHP is purely an object-oriented approach. Its architecture is based on the idea of modularity. Applications can be divided into modules and every component can be extended or replaced without rewriting a single line of code. Fuel supports any template parser such as Smarty, Twig, PHPTal, etc. for parsing views.
FuelPHP community is large and active with over 300 contributors. Its large community regularly creates and improves packages and extensions. The main objective of FuelPHP framework is to provide flexibility and compatibility. It is fast, easy to learn, and a complete solution for developing web applications.
What makes FuelPHP one of the premier frameworks used by PHP developers is that – the new version of FuelPHP is reverse-compatible with its older versions because of its stable API. It is extremely flexible.
Packages and modules make it easy and simple to reuse an existing code in a systematic way. FuelPHP offers maximum performance through a small library. Its interactive debugging allows to easily eliminate the errors in development. Also, its clean and stable code makes programming easier.
FuelPHP ─ Features FuelPHP offers lot of features to create a full-fledged web application. It provides flexible components, simple configuration, easy-to-use ORM, REST based application development mode, etc. Following are some of the salient features:
Flexible and community driven web framework Easy to configure and use FuelPHP is extremely portable, works on almost any server Flexible URI routing system FuelPHP provides RESTful API development support Lightweight ORM model Input filtering and prevents SQL injection
1
FuelPHP
Secure authentication and authorization framework Code reusable and easier to maintain Autoloading classes, Session management, and Exception handling.
FuelPHP ─ Advantages FuelPHP is an elegant HMVC PHP 5.3 framework that provides a set of components for building web applications with the following advantages:
Modular structure ─ Fuel doesn’t force you to use modules or an HMVC file structure. If you want to use, the process is quite easy to integrate. FuelPHP apps are created in a modular structure and becomes easier for developers with clear benefits.
HMVC pattern ─ The most important feature of this framework is HMVC (Hierarchical Model View Controller) which makes it easy to access or use any properties, class methods, functions, files at higher level.
Secure hashing function ─ FuelPHP supports strong cryptography tools and password hashing techniques. It handles encryption, decryption, and hashing using the powerful PHPSecLib.
Scaffolding functionality ─ Scaffolding is a meta-programming method for building database operations. Fuel’s scaffolding is pretty easy. It allows you to get a basic CRUD application with very simple steps.
The following popular products use FuelPHP Framework:
Matic Technology ─ Global provider of offshore custom software development solutions. At Matic Technologies, they provide all the best possible solutions through FuelPHP according to the requirements of the client.
Kroobe ─ Kroobe is a social networking classifieds company. Fuel offers extremely low development costs and services to Kroobe team to achieve efficient solution.
2
FuelPHP 2. FuelPHP ─ Installation
This chapter explains how to install FuelPHP framework on your machine. FuelPHP installation is very simple and easy. You have two methods to create FuelPHP applications:
The first method is Command line installation using FuelPHP tool called Oil.
The second method is Composer based installation. FuelPHP uses Composer, both for installation and for package dependencies, so make sure the composer is installed locally before continuing the process.
Let’s go through each of the methods one by one in detail in the subsequent sections.
System Requirements Before moving to installation, the following system requirements have to be satisfied.
Web server (Any of the following) WAMP (Windows) Microsoft IIS (Windows) LAMP (Linux) MAMP (Macintosh) XAMP (Multi-platform) Nginx (Multi-platform) PHP in-built development web server (Multi-platform)
Browser support (Any of the following) IE (Internet Explorer 8+) Firefox Google Chrome Safari
PHP compatibility: PHP 5.3 or later. To get the maximum benefit, use the latest version.
Let us use PHP's in-built development web server for this tutorial. The built-in development web server is easy to start as well as quite adequate to understand the basics of FuelPHP web application without getting into the complexity of the world of web server and configurations.
3
FuelPHP
Command Line Installation The command line installation of FuelPHP is very easy and takes maximum of five minutes.
Install Oil Package Oil is a special package/command provided by FuelPHP framework to do lot of tasks needed in the development of FuelPHP application including installation, development, and testing the application.
To install the Oil package, open up a shell and run the following command:
sudo curl https://get.fuelphp.com/oil | sh
The command uses curl to download and install the oil package. The command will show result similar to the following information and finally install the oil package.
% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 479 100 479 0 0 353 0 0:00:01 0:00:01 --:--:-- 353
Create a New Project To create a new project using Oil, use the following command:
oil create
Let’s create a new project named “HelloWorld” using the following command.
oil create HelloWorld
Now, you can see response similar to the following and finally create a simple skeleton FuelPHP application.
composer create-project fuel/fuel HelloWorld Installing fuel/fuel (1.8.0.1) - Installing fuel/fuel (1.8.0.1) Loading from cache
Created project in HelloWorld
Loading composer repositories with package information Updating dependencies (including require-dev) - Installing composer/installers (v1.3.0) Loading from cache
4
FuelPHP
- Installing fuelphp/upload (2.0.6) Loading from cache
- Installing michelf/php-markdown (1.4.0) Loading from cache
- Installing psr/log (1.0.2) Loading from cache
- Installing monolog/monolog (1.18.2) Loading from cache
- Installing phpseclib/phpseclib (2.0.0) Loading from cache
- Installing fuel/core (1.8.0.4) Loading from cache
- Installing fuel/auth (1.8.0.4) Loading from cache
- Installing fuel/email (1.8.0.4) Loading from cache
- Installing fuel/oil (1.8.0.4) Loading from cache
- Installing fuel/orm (1.8.0.1) Loading from cache
- Installing fuel/parser (1.8.0.4) Loading from cache
- Installing fuel/docs (1.8.0.4) Loading from cache
5
FuelPHP
……………. …………….
Writing lock file Generating autoload files
Oil Version To test whether Oil is available and to check the version, use the following command:
$ cd HelloWorld $ php oil -v
The above command produces the following result:
Fuel: 1.8 running in "development" mode
Oil Help Command To obtain Oil’s basic help documentation, use the following command:
$ php oil help
The above command will show the help documentation similar to the following result:
Usage: php oil [cell|console|generate|package|refine|help|server|test]
Runtime options: -f, [--force] # Overwrite files that already exist -s, [--skip] # Skip files that already exist -q, [--quiet] # Supress status output -t, [--speak] # Speak errors in a robot voice
Description: The 'oil' command can be used in several ways to facilitate quick development, help with testing your application and for running Tasks.
Environment: If you want to specify a specific environment oil has to run in, overload the environment variable on the commandline: FUEL_ENV=staging php oil
6
FuelPHP
More information: You can pass the parameter "help" to each of the defined command to get information about that specific command: php oil package help
Documentation: http://docs.fuelphp.com/packages/oil/intro.html
As of now, you have an idea of how to install Fuel using Oil. Let’s go through the composer based installation in the next section.
Composer-based Installation The following command is used to install FuelPHP using Composer.
$ composer create-project fuel/fuel --prefer-dist .
Git Repository Clones To install the latest development version as local git repository clones, use the following command.
$ composer create-project fuel/fuel:dev-1.9/develop --prefer-source .
Running the Application Move to the project directory public folder, run the application using the production server with the following command.
$ cd path/to/HelloWorld/public $ php -S localhost:8080 index.php
It produces the following response.
PHP 5.5.31 Development Server started at Sun May 21 12:26:10 2017 Listening on http://localhost:8080 Document root is /Users/workspace/php-fuel/HelloWorld/public Press Ctrl-C to quit.
7
FuelPHP
Now, request the URL, http://localhost:8080 and it will produce the following result.
Result
This is the simplest way to run FuelPHP application in the development environment. If you create your application in this way in the production environment, you will face security issues. The recommended way is setting up a virtual host configuration. It is explained for apache web server in the next section.
Setting Up a Virtual Host It is more secure way to access FuelPHP application. To set up a virtual host, you need to link apache virtual host file to your application. In case of intranet application, redirect system host file URL to virtual host.
Virtual Host File Open the virtual host and add the following changes.
8
FuelPHP
System Host File Now, add a host entry to your machine using the following command.
sudo vi /etc/hosts
Then, add the following line to the end of the file.
127.0.0.1 hello.app
To make all the changes available, restart your Apache server and request the url, http://hello.app. It produces the FuelPHP home page.
9
FuelPHP 3. FuelPHP ─ Architecture Overview
FuelPHP is based on battle tested Model-View-Controller architecture along with HMVC (Hierarchical MVC) support. While MVC provides flexible and layered application development, HMVC goes one step further to enable widgetization of the web application.
The strength of FuelPHP is that it does not enforce specific ways to develop an application. It just provides a simple and easy-to-use standard structure. Developers are free to use the pre-defined set of functionality provided by FuelPHP or modify it whenever needed. All the features provided by FuelPHP including the core feature can be changed according to the requirement of the application.
Model Model is the business entity of the application. Controller and View exchange data in the form of Model. Model enables uniform representation of our business data. It enables the database layer to interact with the web application layer in the standard way and provides an option to select, save, edit, and delete our database entities.
Controller A typical MVC application starts from a Controller. Once a user sends a request to the FuelPHP web application, the application gathers all the information about the request and sends it to the Controller. Controller does the required business logic of the requested page and then calls the relevant View along with the processed data in the form of Models.
View View is the presentation layer of the MVC application. View decides how to show the Model to the user. It supports simple data rendering to the advanced layout, which enables the website to normalize the design across all the pages. View also provides theming support, which enables quick design change across the application.
Presenter Presenter is a special feature provided by FuelPHP. It is the glue between Controller and View. Controller can share some of its low level responsibility such as retrieving model from database, generating data for the view, etc. Controller calls Presenter instead of View, which in turn calls View. Presenter enables pure separation of business logic and presentation layer.
Hierarchical MVC FuelPHP provides an option to call one controller from another controller, similar to the request from the client (browser). If any controller calls another controller, the called controller will return the response to the calling controller instead of rendering it to the client (browser). This enables widgetization of the web application. For example, the comment section can be showed as a stand-alone page as well as a sub-section of the main (blog) page.
10
FuelPHP
Module One of the salient features of FuelPHP is that a section of the web application can be converted into modules, which can be shared among the different application. For example, a blog module created for an application can be reused in another application by just copying the module code from source application to target application.
Note that creating a new module is as simple as developing the main application. The structure is similar to the main application with the only exception that the module should be coding a separate folder.
Package FuelPHP provides an option to organize the code into a single unit called Package. A package can contain one or more functionality needed for the web application. For example, a database component such as ORM, email, etc., can be organized into a package and used whenever needed.
A Package is different from a Module in the sense that the Package does not contain any web pages or partial web pages. Package can be used in FuelPHP as well as any other PHP framework.
Workflow The workflow of the FuelPHP is simple and easy to understand. It is depicted in the following diagram.
User sends a request to the application.
Controller receives the request and gathers information by interacting with the model, which in turn interacts with the database.
Controller gathers information by interacting with other controller by sending a sub- request to the other controllers.
11
FuelPHP
Controller sends the retrieved model to the view, which in turn generates the presentation and sends it to the client as a response.
In some cases, the controller may pass the control to the presenter. In that case, the presenter gathers information from the model and sends it to the client. Here, the presenter does not perform any business logic, except retrieve the model from the database.
12
FuelPHP 4. FuelPHP – Simple Web Application
In this chapter, we will see how to create a simple application in FuelPHP framework. As discussed earlier, you know how to create a new project in Fuel. We can take an example of Employee details.
Let’s start by creating a project named Employee using the following command.
oil create employee
After executing the command, an employee project is created with the following file structure:
employee ├── CHANGELOG.md ├── composer.json ├── composer.lock ├── composer.phar ├── CONTRIBUTING.md ├── fuel │ ├── app │ │ ├── bootstrap.php │ │ ├── cache │ │ ├── classes │ │ ├── config │ │ ├── lang │ │ ├── logs │ │ ├── migrations │ │ ├── modules │ │ ├── tasks │ │ ├── tests │ │ ├── themes │ │ ├── tmp │ │ ├── vendor │ │ └── views │ ├── core │ │ ├── base56.php │ │ ├── base.php │ │ ├── bootstrap.php
13
FuelPHP
│ │ ├── bootstrap_phpunit.php │ │ ├── classes │ │ ├── composer.json │ │ ├── config │ │ ├── CONTRIBUTING.md │ │ ├── lang │ │ ├── phpunit.xml │ │ ├── tasks │ │ ├── tests │ │ ├── vendor │ │ └── views │ ├── packages │ │ ├── auth │ │ ├── email │ │ ├── oil │ │ ├── orm │ │ └── parser │ └── vendor │ ├── autoload.php │ ├── composer │ ├── fuelphp │ ├── michelf │ ├── monolog │ ├── phpseclib │ └── psr ├── LICENSE.md ├── oil ├── public │ ├── assets │ │ ├── css │ │ ├── fonts │ │ ├── img │ │ └── js │ ├── favicon.ico │ ├── index.php │ └── web.config
14
FuelPHP
├── README.md └── TESTING.md
42 directories, 21 files
Structure of the Application
FuelPHP framework provides a well-organized application structure. Let us check some of the important files and folders of the application.
fuel - Contains all the PHP files.
public - Contains all the assets which are directly accessed through the browser such as JavaScript, CSS, images, etc.
oil - An executable used to run command line tasks such as generating code or interactive debugging within your application. It's optional.
fuel/app/ - Contains all application-specific PHP files. It contains Models, Views, and Controllers.
fuel/core/ - This is where Fuel framework itself lives.
fuel/packages/ - Contains all fuel packages. By default, fuel will contain three packages: oil, auth, and orm. These packages will not be loaded unless you require them.
fuel/app/config/ - Contains all application-related configuration files. The main application configuration file, config.php file is located here.
fuel/app/classes/ - Contains all the application specific MVC based PHP files. It contains controllers, models, helper classes, libraries, etc.
fuel/app/classes/controller/ - Controllers are placed here.
fuel/app/classes/model/ - Models are placed here.
fuel/app/views/ - Contains view files. There are no specific naming conventions for views.
Add a Controller As discussed earlier, FuelPHP is based on the Model-View-Controller (MVC) development pattern. MVC is a software approach that separates application logic from presentation. In MVC pattern, the controller plays an important role and every webpage in an application needs to be handled by a controller. By default, controllers are located in fuel/app/classes/controller/ folder. You can create your own Controller class here.
Move to the location fuel/app/classes/controller/ and create employee.php file. To create a new controller, just extend the Controller class provided by FuelPHP, defined as follows.
15
FuelPHP
employee.php
echo "FuelPHP-Employee application!"; } }
Now, we have created an Employee Controller and added a public method, action_home, which prints a simple text.
Routing Routing resolves the web page URI into specific controller and action. Every webpage in a FuelPHP application should go through routing before the actual execution of the controller. By default, each controller can be resolved using the following URI pattern.
controller is the name of the controller minus namespace, employee action is the name of the method minus action_ keyword, home
The newly created controller can be accessed by http://localhost:8080/employee/home and it will produce the following result.
Result
16
FuelPHP 5. FuelPHP ─ Configuration
In this chapter, we will understand how to configure a FuelPHP application. By default, configuration files are stored inside the fuel/app/config folder. The application's main configuration is fuel/app/config/config.php. The configuration is specified using PHP's associated array.
Overview By default, all default configuration files are defined in fuel/core/config folder. To override a default configuration, add the corresponding key in the /fuel/app/config/config.php file and modify the value. We can use “dot-notation” to simplify multi-dimensional array. For example, the following configurations serve the same purpose (load specified packages).
array("always_load" => array("packages" => array( ... ) ) ); always_load.packages = array( ... );
Configuration can be grouped by purpose and specified using different files such as db.php for database configuration, package.php for package management, etc.
Type of Configuration Format FuelPHP is quite flexible and provides different format to specify the configuration. The default configuration format is PHP using php array. The other options are -
INI - Simple text-based configuration supported by many softwares including PHP language itself.
[group] key=value
YAML - Easy to understand, indentation based, and human readable configuration management.
group: key: value
JSON - Easy to understand and most used file format by the developers.
{ "group" : { "key": "value" } }
17
FuelPHP
Memcached - Stores the configuration in a memcached server. The memcached server details can be specified in the main configuration file, fuel/app/config/config.php using config.memcached entry.
DB - Stores the configuration in RDBMS System. The table structure of the configuration table is as follows.
CREATE TABLE IF NOT EXISTS `config` ( `identifier` char(100) NOT NULL, `config` longtext NOT NULL, `hash` char(13) NOT NULL, PRIMARY KEY (`identifier`) )
The database and table details can be specified in the configuration file using config.database and config.table_name entries.
Environment Environment enables FuelPHP to work in different modes by loading different configuration. FuelPHP supports the following environment.
Development - \Fuel::DEVELOPMENT sets the development mode Production - \Fuel::PRODUCTION sets the production mode Test - \Fuel::TEST sets the testing mode Staging - \Fuel::STAGING sets the staging mode
FuelPHP also supports the creation of a new environment. This will enable every developer to have his/her own configuration setting and they can enable it while coding and testing the application. The configuration of a specific environment can be added by simply creating a folder with the environment name (example: test) and placing the configuration file inside the newly created folder, shown as follows.
. ├── config.php ├── db.php ├── development │ └── db.php ├── production │ └── db.php ├── routes.php ├── staging │ └── db.php
18
FuelPHP
└── test └── db.php
4 directories, 7 files
Set Your Environment There are three ways to set up your environment.
Option 1: Set environment with web server's environment variables. Add the following code in the virtual host section in httpd.conf file of Apache web server. It can be added in .htaccess file as well.
SetEnv FUEL_ENV production
Option 2: Set environment with FuelPHP bootstrap file, /fuel/app/bootstrap.php
Fuel::$env = (isset($_SERVER['FUEL_ENV']
Option 3: Set Environment using Oil
$ env FUEL_ENV=production php oil -v
It produces the following result.
Fuel: 1.8 running in "production" mode
19
FuelPHP 6. FuelPHP ─ Controllers
Controllers are responsible for handling each request that comes into FuelPHP application. According to FuelPHP, controllers are located at fuel/app/classes/controller/. Let's first create an Employee Controller. employee.php
class Controller_Employee extends Controller { public function action_home() { echo "FuelPHP-Employee application!"; }
public function action_index() { echo "This is the index method of employee controller"; } }
Controller Methods Controllers process a web request by using one of its action_ methods. We can create as many action_ methods depending on the requirement of the application. The default action_ method is action_index. action_index method can be called by any one of the following URLs.
http://localhost:8080/employee/index http://localhost:8080/employee/
Result
20
FuelPHP
Let us create a new action method, action_show in our employee application.
class Controller_Employee extends Controller { public function action_home() { echo "FuelPHP-Employee application!"; }
public function action_index() { echo "This is the index method of employee controller"; }
public function action_show() { echo "This is the show method of employee controller"; } } action_show method can be called using the following URL.
http://localhost:8080/home/show
Result
before( ) Method We can create a method, before in our controller. This method will be executed before each and every action_ method invocation. It will not be called if that method turns out not to exist. This method helps us write common actions such as login checking, default data fetching, etc.
21
FuelPHP
Let us create a before method and print a simple text message.
public function before() { echo "This message comes from before() method"; }
Index page with before action:
Show page with before action:
after( ) Method after() method is similar to before() method but executed after the action_ method is called. after() method takes response as an input and returns the response object.
public function after($response) { if ( ! $response instanceof Response) { $response = \Response::forge($response, $this->response_status); } return $response; }
If the input is NULL or not response object, then create a new Response object using Response's forge method and return it. We will learn Response class in detail in the subsequent chapters.
22
FuelPHP
Extending Controllers We can extend one controller from another controller. Following is the basic syntax.
class Controller_Employee extends Controller_Welcome { // controller methods }
This will help in sharing methods.
Generate Controller Fuel has the option to generate controller using Oil command. Following is the syntax.
Syntax
oil g controller
Example
oil g controller sample
After executing the above command, you will see the following response.
Result
Creating view: /path/to/project/fuel/app/views/template.php Creating view: /path/to/project/fuel/app/views/sample/index.php Creating controller: /path/to/project/fuel/app/classes/controller/sample.php
Type of Controllers FuelPHP provides different type of controller for various purpose. They are as follows:
Base controller Template controller Rest controller Hybrid controller
Base Controller Controller is the base controller for all the different types of controllers available in FuelPHP. It provides all the basic functionalities needed to process a web request. It
23
FuelPHP
supports Request, Response, Session, etc. We will be using it in all examples unless otherwise specified.
Template Controller A Template Controller is an extension of the base controller. It has template support, pre- defined before() and after() methods. Basically, it can be used to wrap your view in a layout with a header, footer, sidebar, etc. To create a template controller, we need to extend the Controller_Template class. By default, all methods of a class that extends Controller_Template need to use the template.
It is defined as follows.
class Controller_Employee extends Controller_Template { public function action_index() { // add methods } }
We will discuss more about template controller in Views chapter.
Rest Controller A Rest Controller is an extension of the Base Controller. It has pre-defined support for REST API programming. This will allow you to build APIs with ease.
To create rest controller, you need to extend the Controller_Rest class. It is defined as follows.
class Controller_Employee extends Controller_Rest { public function action_index() { // add methods } }
We will discuss more about rest controller in Ajax chapter.
Hybrid Controller The hybrid controller performs the functionality of both the REST controller and the Template controller in a single base controller.
24
FuelPHP 7. FuelPHP ─ Routing
Routing maps request an URI to a specific controller's method. In this chapter, we will discuss the concept of routing in FuelPHP in detail.
Configuration Routes configuration file is located at fuel/app/config/routes.php. The default routes.php file is defined as follows:
'welcome/index', // The default route '_404_' => 'welcome/404', // The main 404 route
'hello(/:name)?' => array('welcome/hello', 'name' => 'hello'), );
Here, _root_ is the predefined default route, which will be matched when the application is requested with root path, / e.g. http://localhost:8080/. The value of the _root_ is the controller and the action to be resolved when it is matched. welcome/index resolves to Controller_Welcome controller and action_index action method. Similarly, we have the following reserved routes.
root - The default route when no URI is specified. 403 - It throws when HttpNoAccessException is found. 404 - It returns when the page is not found. 500 - It throws when HttpServerErrorException is found.
Simple Routing The route is compared to the request URI. If a match is found, the request is routed to the URI. Simple routing is described as follows,
return array( 'about' => 'site/about', 'login' => 'employee/login', );
Here, about matches http://localhost:8080/about and resolves the controller, Controller_Site and action method, action_about login matches http://localhost:8080/login and resolves the controller, Controller_Login and action method, action_login
25
FuelPHP
Advanced Routing You can include any regex into your routes. Fuel supports the following advanced routing features:
:any - This matches anything from that point on in the URI, does not match “nothing” :everything - Like :any, but also matches “nothing” :segment - This matches only 1 segment in the URI, but that segment can be anything :num - This matches any numbers :alpha - This matches any alpha characters, including UTF-8 :alnum - This matches any alphanumeric characters, including UTF-8
For example, the following route matches URI http://localhost:8080/hello/FuelPHP and resolves controller, Controller_Welcome, and action action_hello
'hello(/:name)?' => array('welcome/hello', 'name' => 'hello'),
The corresponding action method in Controller_Welcome is as follows,
public function action_hello() { $this->name = Request::active()->param('name', 'World'); $message = "Hello, " . $this->name;
echo $message; }
Here, we have used Request class to get the name parameter from the URL. If the name is not found, then we are using World as default value. We will learn the Request class in the Request and Response chapter.
Result
26
FuelPHP
HTTP Method Action FuelPHP supports routes to match HTTP method prefixed actions. Following is the basic syntax.
class Controller_Employee extends Controller { public function get_index() { // called when the HTTP method is GET. }
public function post_index() { // called when the HTTP method is POST. } }
We can route your URLs to controllers and actions based on the HTTP verb in the configuration file as follows.
return array( // Routes GET /employee to /employee/all and POST /employee to /employee/create ‘employee’ => array(array('GET', new Route(‘employee/all')), array('POST', new Route(‘employee/create'))), );
27
FuelPHP 8. FuelPHP ─ Requests & Response
HTTP request and HTTP response play an important role in any web application. We need to get the complete details of the http request to process it properly. Once processed, we need to send the processed data to the client through http response.
FuelPHP provides excellent Request and Response class to read and write HTTP request and HTTP response respectively. Let us learn about both Request and Response class in this chapter.
Request In a typical web application, the application need to parse the details of the current request. Request class provides simple methods to parse the current request to be processed by the application. Request also provides an option to create a new request by acting as a http client.
Creating a new request enables the application to request other part of the application or entirely another application and show the result. Let us learn how to parse the incoming request in this chapter and learn how to create a new request in HMVC Request chapter.
Parsing a Request Request class provides three methods to get the details of the http request. They are as follows, active - It is a static method, which returns the current active http request.
$currentRequest = Request::active(); param – It returns the value of the specified parameter. It contains two arguments. The first argument is the parameter name and the second argument is the value to return, if the parameter is not available in the current http request.
$param = Request::active()->param('employee_name', 'none'); params – It is same as param except it returns all the parameters as an array.
$params = Request::active()->params();
Example Let us create a simple form and process the form using request class.
Step 1: Create a new action, action_request in the employee controller.
public function action_request() { }
28
FuelPHP
Step 2: Call the request methods to get all the parameters of the current request.
public function action_request() { $params = Request::active()->params(); }
Step 3: Dump the fetched parameter array.
public function action_request() { $params = Request::active()->params();
echo dump($params); }
Step 4: Change the routing to include the parameters in the route configuration file, fuel/app/config/routes.php
'employee/request(/:name)?' => array('employee/request', 'name' => 'name'),
Now, requesting the new action, http://localhost:8080/employee/request/Jon, it will show the following response.
Response Response class provides options to create a http response. By default, we don't need to use a response class directly in most situations. Instead, we use View (which we will learn in the next chapter) to create http response. View hides the http response from the developer and sends the response to the client using underlying Response class. In an advanced situation, we use Response class directly and create a complete http response.
Creating a Response Response consists of headers and body. The main header is http status code. Http status code are standard codes defined in the HTTP protocol to describe the response. For example, a status code, 200 means the request is success.
29
FuelPHP
Response class provides three arguments to create the http response,
$body - body of the http response $status_code - status code of the http response $headers - optional headers as array
$body = "Hi, FuelPHP"; $headers = array ( 'Content-Type' => 'text/html', ); $response = new Response($body, 200, $headers);
Let us create a new action, action_response in the employee controller as follows.
public function action_response() { $body = "Hi, FuelPHP"; $headers = array ( 'Content-Type' => 'text/html', ); $response = new Response($body, 200, $headers); return $response; }
Result
Methods Response class provides a lot of methods to manipulate http responses. They are as follows, forge – It is the same as response class constructor as seen above.
return Response::forge("Hi, FuelPHP", 404);
30
FuelPHP
redirect – It provides option to redirecting to a URL instead of sending a response. It contains the following arguments, a.url - destination url b. method - redirection methods. location (default) and refresh c. redirect_code - http status code. The default value is 302.
// use a URL Response::redirect('http://some-domain/index', 'refresh');
// or use a relative URI Response::redirect('employee/list'); redirect_back – It is similar to redirect method except it redirects to the previous page. We can specify the redirection page, if no back page is available.
// If there is no back page, go to the employee list page Response::redirect_back('/employee/list', 'refresh'); set_status – It provides an option to set the http status code.
$response = new Response(); $response->set_status(404); set_header – It provides an option to set the http headers.
$response = new Response(); $response->set_header('Content-Type', 'application/pdf');
// replace previous value using third arguments $response->set_header('Content-Type', 'application/pdf', 'text/plain'); set_headers – It is same as set_header except it provides an option to set multiple headers using array.
$response = new Response(); $response->set_headers(array 'Content-Type' => 'application/pdf', 'Pragma' => 'no-cache', ));
31
FuelPHP
get_header – It enables to get the previous set header details.
$response = new Response(); $response->set_header('Pragma', 'no-cache');
// returns 'no-cache' $header = $response->get_header('Pragma');
// returns array('Pragma' => 'no-cache') $header = $response->get_header(); body – It provides an option to set the body of the http response.
$response = new Response(); $response->body('Hi, FuelPHP');
// returns 'Hi, FuelPHP' $body = $response->body(); send_headers – It sends the headers to the requested client. FuelPHP uses this method to send the response to the client. Normally, we don't need to use this method.
$response->send_headers();
Send - Same as send_headers except headers may be restricted in the http response.
// send the headers as well $response->send(true);
// only send the body $response->send(false); $response->send();
32
FuelPHP 9. FuelPHP ─ Views
View is the presentation layer of the MVC application. It separates the application logic from the presentation logic. When a controller needs to generate HTML, CSS, or any other content then, it forwards the task to the view engine.
FuelPHP provides a simple and flexible class, View with all the necessary features of a view engine. View class supports rendering of view file. View file is a HTML page with embedded PHP instructions. Variables of the view file can be set using View class as PHP array and referenced in the view file using the array's key. Let us check some of the important methods of View class. forge Purpose: Creates a new View object Parameter: Following are the parameters - o $file - Path of the view file relative to the views folder, fuel/app/views o $data - Array of values o $filter - Sets auto encoding, defaults to settings in the main configuration file Returns: Instance of the view
For example,
$view = View::forge('path/to/view', array( 'title' => "Show employee, 'employees' => $employees, )); auto_filter Purpose: Set whether to encode the data or not Parameter: Following is the parameter - o $filter - true / false Returns: Current view object
For example,
$view->auto_filter(); $view = $view->auto_filter(false);
33
FuelPHP
set_filename Purpose: Allows to set or change the view file. Parameter: Following is the parameter - o $file - Path to view file relative to views folder, fuel/app/views Returns: Current View object
For example,
$view = new View(); $view->set_filename('path/to/view'); set Purpose: Set the value of one or more variables Parameter: Following are the parameters - o $key - Variable name or array of values o $value - Value / null o $filter - Encoding setting, true / false Returns: Current view object
For example,
$view = new View(); $view->set(array('name' => 'Jon')); set_global set_global is similar to set, except that it applies to all the views and the variables are accessible by all views. This is a static method.
View::set_global('name', 'Jon', false); set_safe Purpose: Set the value of one or more variables with safe encoding on. Parameter: Following are the parameters - o $key - Variable name or array of values o $value - Value / null Returns: Current view object
34
FuelPHP
For example,
$view = new View(); $view->set_safe(array('name' => 'Jon'), null); get Purpose: Get the value of one or more variables Parameter: Following are the parameters - o $key - Variable name o $default - Default value to be returned if the key is not found Returns: Value of the input key
For example,
$view = new View(); $name = $view->get('name'); // name = 'Jon' render
Purpose: Render the view files into string by merging it with the local and global variables Parameter: Following are the parameters - o $file - The view filename Returns - The rendered view file as string
For example,
$html = View::forge()->render('/path/to/view');
Create a View
To understand the views, let us modify the action method, action_show of controller, Controller_Employee. employee.php
class Controller_Employee extends Controller{ public function action_show() {
35
FuelPHP
return View::forge('employee/show'); } }
Now create a folder employee in views directory, located at fuel/app/views. Then, create a file show.php inside employee folder and add the following code. show.php
My first view
Now, request the url http://localhost:8080/employee/show and it produces the following result.
Passing Data to View
We can pass data to the views using View methods as discussed earlier. Following is a simple example. employee.php
class Controller_Employee extends Controller { public function action_show() { $data = array(); //stores variables going to views $data['name'] = ‘Jon’; $data[‘job’] = ‘Designer’;
//assign the view to browser output return View::forge('employee/show', $data); } }
Now, add the changes in the view file.
36
FuelPHP
show.php
Hello, . Your job is, .
After requesting the URL, it will display the name and the job as follows:
View Filter
Views use output encoding to pass anything you want. If you want to pass unfiltered data, we can use the set method. employee.php
class Controller_Employee extends Controller { public function action_show() { $view = \View::forge('employee/show'); $view->set('name', 'Jon', true); $view->set('job', 'Designer', false); return $view; } }
After requesting the URL, it will display the job details in emphasis style, as follows.
37
FuelPHP
Nested views FuelPHP support nested views. In nested views, a view can contain one or more view. To set the views in another view, we can use render method as follows. employee.php
class Controller_Employee extends Controller { public function action_nestedview() { //assign variables $data = array(); $data['title'] = 'Home';
$data['name'] = 'Jon'; $data['job'] = 'Designer';
$views = array(); $views['head'] = View::forge('head', $data)->render(); $views['content'] = View::forge('employee/show', $data)->render();
return View::forge('layout', $views, false)->render(); } } fuel/app/views/layout.php
38
FuelPHP
fuel/app/views/head.php
Hello, . Your job is, .
After requesting the URL, http://localhost:8080/employee/nestedview and checking the source view, it gives the following code.
Template Controller FuelPHP provides a controller, Controller_Template with built-in layout concept. The layout concept is done using before() and after() method of Controller. To use the template controller, we need to extend the controller using Controller_Template instead of Controller. While using after() / before() method, we need to call parent::before and parent::after, otherwise, the template breaks.
public function after($response) {
39
FuelPHP
$response = parent::after($response); // do stuff return $response; } } template.php It is a default template file in Fuel. The template file is used to call JS, CSS, HTML, and call view partials. It is located at fuel/app/views/. Templates are used to wrap your view in a layout with a header, footer, sidebar, etc. We can change default template using $template variable in the action method as follows. fuel/app/classes/controller/test.php
class Controller_Test extends Controller_Template { public $template = 'template_test'; public function action_index() { $this->template->title = 'Example Page'; $this->template->content = View::forge('test/index'); } } fuel/app/views/template_test.php
40
FuelPHP
My Test page
Now, request the URL http://localhost:8080/test and it produces the following result.
Result
My Test page
Generate View Page You can generate a view page using Fuel's Oil console. Following is the basic syntax.
oil g controller
To generate an admin controller with home and login pages, use the following command.
oil g controller admin home login
41
FuelPHP
Result
Creating view: /path/to/app/fuel/app/views/admin/home.php Creating view: /path/to/app/fuel/app/views/admin/login.php Creating controller: /path/to/app/fuel/app/classes/controller/admin.php
42
FuelPHP 10. FuelPHP ─ Presenters
FuelPHP provides an additional layer after the controller to generate views. Once the controller processes the input and is done with the business logic, it sends the control to the Presenter, which takes care of the extra logic such as fetching data from the database, setting view data, etc., and then, calls the View object.
We can render the views using the Presenter class as follows: fuel/app/classes/controller/employee.php
public Controller_Employee extends Controller { public function action_welcome() { return Presenter::forge('employee/hello'); } }
The default location of presenter class is fuel/app/classes/presenter/. Following is a simple example. fuel/app/classes/presenter/employee/hello.php
class Presenter_Employee_Hello extends Presenter { public function view() { $this->name = Request::active()->param('name', 'World'); } }
The view file of the above presenter class resolves to employee/hello.php relative to the views folder, which is as specified. fuel/app/views/employee/hello.php
Hi,
43
FuelPHP
Finally, change the route to match the employee's welcome action, shown as follows: fuel/app/config/routes.php
'employee/hello(/:name)?' => array('employee/welcome', 'name' => 'hello'),
Now, requesting the URL, http://localhost:8080/employee/hello/Jon renders the following result.
Result
44
FuelPHP 11. FuelPHP ─ Models & Database
Model plays an important role in FuelPHP web framework. It represents the business entities of the application. They are either provided by customers or fetched from back- end database, manipulated according to the business rules and persisted back into the database. Let us learn about models and how they interact with back-end system in this chapter.
Creating a Model In FuelPHP, model is simply plain PHP class extending built-in Model class. By default, models may be prefixed with Model_ similar to controllers and should be placed in fuel/app/classes/model/ folder. Let us create a basic employee model and extend it as we proceed. fuel/app/classes/model/employee.php
Access a Model
Once a model is defined, it can be freely used in any controller just by including it in the controller as follows.
use \Model\Employee; class Controller_Employee extends Controller { public function action_index() { $employees = Employee::fetchAll(); } }
45
FuelPHP
Database Overview FuelPHP provides its own database abstraction layer to fetch data from the database. It provides both basic as well as advanced ORM based tool. The basic toolkit consists of DB, DBUtil and Query_Builer based classes. The advanced toolkit is Orm. Orm toolkit is derived from the base toolkit and bundled as a separate package.
Database Configuration
FuelPHP separates the database settings from the main configuration file and the file is fuel/app/config/db.php. It supports a separate setting for each environment. Currently, FuelPHP supports MySQL, MySQLi, and PDO drivers. The sample setting is as follows:
return array( 'development' => array( 'type' => 'mysqli', 'connection' => array( 'hostname' => 'localhost', 'port' => '3306', 'database' => 'tutorialspoint_fueldb', 'username' => 'root', 'password' => 'password', 'persistent' => false, 'compress' => false, ), 'identifier' => '`', 'table_prefix' => '', 'charset' => 'utf8', 'enable_cache' => true, 'profiling' => false, 'readonly' => false, ), )
DB-based Toolkit The DB class is the simplest option to access database from the application. It provides options to build the database query, execute it against the target database, and finally fetch the result. The DB class interacts with the following classes and provides a comprehensive database API.
46
FuelPHP
Database_Connection - Singleton and main class to interact with the database Database_Query - Base, concrete class to execute the SQL query and fetch result Database_Query_Builder - Base, abstract class to build SQL query Database_Query_Builder_Join - Class to build SQL joins Database_Query_Builder_Where - Abstract class to build SQL query conditions Database_Query_Builder_Select - Concrete class to build SQL select query Database_Query_Builder_Insert - Abstract class to build SQL insert query Database_Query_Builder_Update - Abstract class to build SQL update query Database_Query_Builder_Delete - Abstract class to build SQL delete query
The following diagram depicts the relationship between classes and the methods provided by the classes.
47
FuelPHP
DB API Let us learn the most important methods available in the DB class in this section. instance Purpose: Creates and returns the new Database_Connection instance. Parameter: o $db - Database connection name defined in configuration file, optional. Returns: Returns the Database_Connection object
For example,
$db = DB::instance(); $db = DB::instance('test'); query Purpose: Prepare the provided SQL statement and returns the Database_Query object, which can be used to insert, update, delete, or fetch the data from the database.
Parameters:
o $query - SQL statement, may contain placeholders;
o $type - SQL type, optional (DB::SELECT, DB::INSERT, DB::UPDATE and DB::DELETE)
Returns: Returns the Database_Query object
For example,
$query = DB::query('SELECT * FROM 'employees''); last_query Purpose: To get the last executed query Parameter: None Returns: Returns the last executed query
For example,
$employees = DB::Select('Select * from 'employee''); $sql = DB::last_query();
48
FuelPHP
select Purpose: Generate the select part of the query Parameter: o $columns - List of the database column names
Returns: Returns the Database_Query_Builder_Select object
For example,
$query = DB::select(); // Select * $query = DB::select('id', 'name'); // Select id, name select_array (DB) It is similar to select except we can send columns as array.
$query = DB::select_array(array('id', 'name')); // Select id, name insert Purpose: Generate the insert part of the query
Parameters:
o $table_name - name of the database table; o $columns - array of table columns Returns: Returns the Database_Query_Builder_Insert object
For example,
$query = DB::insert('employee'); // Insert into employee $query = DB::insert('employee', array('id', 'name')); // Insert into employee (id, name) update Purpose: Generate the update part of the query
Parameter: o $table_name - name of the database table
Returns: Returns the Database_Query_Builder_Update object
For example,
$query = DB::update('employee'); // update `employee`
49
FuelPHP
delete Purpose: Generate the delete part of the query
Parameter: o $table_name - name of the database table
Returns: Returns the Database_Query_Builder_Delete object
For example,
$query = DB::delete('employee'); // delete from 'employee'
Query API
Database_Query provides an option to set database connection, execute the query, and fetch the result as associative array or object. Let us see the methods provided by Database_Query class. set_connection Purpose: To set the database (database connection details) against which to execute the query
Parameter: $db - database connection name
Returns: Returns the Database_Query object
For example,
$query = DB::query('DELETE * FROM employee', DB::DELETE); $query->set_connection('2nd-db'); param Purpose: To set the value of the parameter defined in the Query object Parameters: o $param - parameter name; o $value - value of the parameter Returns: Returns the Database_Query object
For example,
// set some variables $table = 'employee'; $id = 1; $name = 'Jon';
50
FuelPHP
// don't use $query = DB::query('SELECT * FROM '.$table.'. WHERE id = '.$id.' AND name = "'.$name.'"');
// but use $query = DB::query('SELECT * FROM :tablename WHERE id = :id AND name = :name'); $query->param('tablename', 'employee'); $query->param('id', $id); $query->param('name', $name);
Similar Methods parameters is a similar object except it provides option to give multiple value at once.
$query->parameters(array( 'tablename' => $table, 'id' => $id, 'name' => $name }); bind Purpose: To set a variable to the parameter defined in the Query object
Parameters:
o $param - parameter name o $var - the variable to bind the parameter to
Returns: Returns the Database_Query object
For example,
// bind a query parameter $table = 'employee'; $query = DB::query('DELETE * FROM :tablename', DB::DELETE); $query->bind('tablename', $table);
// update the variable $table = 'employee_salary'; // DELETE * FROM `employee_salary`; $sql = $query->compile();
51
FuelPHP
compile Purpose: To compile the query object defined into SQL query Parameter: o $db - connection string, optional Returns: Returns the SQL query
For example,
// assign a value to a query parameter $table = 'employee'; $query = DB::query('DELETE * FROM :tablename', DB::DELETE); $query->param('tablename', $table);
// compile the query, returns: DELETE * FROM employee $sql = $query->compile(); execute Purpose: To execute the query defined in the Query object and return the result
Parameter: o $db - database connection name
Returns: Returns the result
For example,
// assign a value to a query parameter $table = 'employee'; $query = DB::query('DELETE * FROM :tablename', DB::DELETE); $query->param('tablename', $table);
// execute the query $query->execute(); as_assoc Purpose: To set return type as associative array instead of objects Parameter: None Returns: Returns the current object
52
FuelPHP
For example,
$query = DB::query('SELECT * FROM employee', DB::SELECT); $result = $query->as_assoc()->execute(); foreach ($result as $row) { echo $row['id']; } as_object Purpose: To set return type as object instead of associative array Parameter: None Returns: Returns the current object
For example,
$query = DB::query('SELECT * FROM employee', DB::SELECT); $result = $query->as_object()->execute(); foreach ($result as $row) { echo $row->id; }
// have ORM model objects return instead $result = $query->as_object('Model_Employee')->execute();
Query Builder API
Query builder (Query_Builder) based classes provide options to build SQL queries dynamically. It has four classes, each one to select (Query_Builder_Select), insert (Query_Builder_Insert), update (Query_Builder_Update) and delete (Query_Builder_Delete) queries. These classes are derived from Query_Builder_Where class (option to generate conditions), which itself is derived from Query_Builder, base of all classes.
Let us look at the methods provided by Query_Builder class. select Purpose: To generate the columns of select queries. Parameter: o $columns - list of columns, optional Returns: Returns the current instance
53
FuelPHP
For example,
$query = DB::select('name') // select `name` $query = DB::select(array('first_name', 'name')) // select `first_name` as `name` from Purpose: To generate the table details of select queries Parameter: o $tables - list of tables Returns: Returns the current instance
For example,
$query = DB::select('name')->from('employee') // select `name` from `employee` where Purpose: To generate the conditions of select, insert and update queries
Parameters: o $column - column name or array ($column, $alias); o $op - logic operators, =, !=, IN, BETWEEN and LIKE, optional; o $value - column value
Returns: Returns the current instance
For example,
$query = DB::select('name')->from('employee') $query = $query->where('name', '=', 'Jon'); // select `name` from `employee` where `name` = `Jon`;
Similar Methods The similar methods are where_open(), and_where_open(), or_where_open(), where_close(), and_where_close(), or_where_close(). They are similar to where() methods except that they add extra keywords and brackets around conditions. Following is a sample code.
$query = DB::select('*')->from('employee');
$query->where('email', 'like', '%@gmail.com'); $query->or_where_open(); $query->where('name', 'Jon'); $query->and_where('surname', 'Peter');
54
FuelPHP
$query->or_where_close();
// SELECT * FROM `employee` WHERE `email` LIKE "%gmail.com" OR (`name` = "Jon" AND `surname` = "Peter") join Purpose: To generate the table joins of select queries Parameters: o $table - table name or array($table, $alias); o $type - join type (LEFT, RIGHT, INNER, etc.,) Returns: Returns the current instance
Example
$query = DB::select('name')->from('employee')->join('employee_salary') // select `name` from `employee` JOIN `employee_salary` on Purpose: To generate the condition of joins in select queries Parameters: o $c1 - table name or table name with alias in array; o $op - logical operator; o $c2 - table name or table name with alias in array Returns: Returns the current instance
For example,
$query = DB::select('name')->from('employee')->join('employee_salary') $query = $query->on('employee.employee_id', '=', 'employee_salary.employee_id') // select `name` from `employee` JOIN `employee_salary` on // `employee.employee_id` = `employee_salary.employee_id`
Similar Methods The related methods are and_on() and or_on(). They are similar to on() except that they add extra keyword and brackets around joins.
group_by o Purpose: To generate group by queries o Parameter: $columns - Column name by which to group the result
55
FuelPHP
o Returns: Returns the current instance
For example,
$query = DB::select('name')->from('employee') $query = $query->group_by('name'); // select `name` from `employee` group by `name`
having o Purpose: To generate the group by conditions of SQL queries
o Parameter: $column - column name or array( $column, $alias ); $op - logic operators, =, !=, IN, BETWEEN and LIKE, optional; $value - column value
o Returns: Returns the current instance
Example
$query = DB::select('name')->from('employee') $query = $query->group_by('name'); $query = $query->having('name', '!=', 'Jon'); // select `name` from `employee` group by `name` having `name` != `Jon`
Similar Methods The similar methods are having_open(), and_having_open(), or_having_open(), having_close(), and_having_close(), or_having_close(). They are similar to having() methods except that they add extra keywords and brackets around conditions.
reset o Purpose: To reset the query o Parameter: None o Returns: Returns the current instance
For example,
$query = DB::select('name')->from('employee') $query->reset() $query = DB::select('name')->from('employee_salary') // select `name` from `employee_salary`
DBUtil class DBUtil class provides an option to manage and perform routine database operations. Some of the important methods are as follows:
set_connection - Sets the default connection
56
FuelPHP
DBUtil::set_connection('new_database');
create_database - Creates a database.
DBUtil::create_database('my_database');
drop_database - Drops a database.
DBUtil::drop_database('my_database');
table_exists - Checks if a given table exists.
if(DBUtil::table_exists('my_table')) { // Table exists } else { // Table does NOT exist, create it! }
drop_table - Drops a table.
DBUtil::drop_table('my_table');
create_table - Creates a table.
\DBUtil::create_table( 'users', array( 'id' => array('type' => 'int', 'auto_increment' => true), 'name' => array('type' => 'text'), ), );
Orm Toolkit FuelPHP provides advanced database layer using ORM concept based on the popular Active record pattern. The toolkit is included in the application but not configured by default. It is bundled as a package and the package name is orm. We can add the following configuration in the main configuration file, fuel/app/config/config.php to load the orm toolkit.
'always_load' => array( 'packages' => array(
57
FuelPHP
'orm', ), ),
Creating Models Orm provides base model class Orm\Model. We need to extend our models with the orm model to use the ORM features. Following is a sample code.
class Model_Employee extends Orm\Model {}
Configuration Orm provides a set of settings to configure the model to use the ORM features. They are as follows: connection - Set a static _connection property in the model to specify the connection name.
class Model_Employee extends Orm\Model { protected static $_connection = "production"; } table name - Set a static _table_name property in the model to specify the table name of the backend table.
class Model_Employee extends Orm\Model { protected static $_table_name = 'employee'; } primary key - Set a static _primary_key propery in the model to specify the primary key of the backend table.
class Model_Employee extends Orm\Model { protected static $_primary_key = array('id'); }
58
FuelPHP
Columns - Set a static _properties property in the model to specify the columns of the backend table. It supports data_type, label, validation, form elememts, etc.
class Model_Employee extends Orm\Model { protected static $_properties = array( 'id', 'name' => array( 'data_type' => 'varchar', 'label' => 'Employee Name', 'validation' => array( 'required', 'min_length' => array(3), 'max_length' => array(80) ), 'form' => array( 'type' => 'text' ), ),
'age' => array( 'data_type' => 'int', 'label' => 'Employee Age', 'validation' => array( 'required', ),
'form' => array( 'type' => 'text' ), ), ); }
Conditions - Set a static _conditions property to set the conditions and order by options.
59
FuelPHP
class Model_Employee extends Orm\Model { protected static $_conditions = array( 'order_by' => array('id' => 'desc'), 'where' => array( array('is_active', '>', true), ), ); }
Observers - Orm provides observer based event system to add behavior to specific events. To add a behavior, first set a _observers property in the model. Then, define the behavior as a class and set it in the _observers property along with events. If no event is specified, the behavior will be invoked for all events. We can specify multiple behavior as well.
class Model_Employee { protected static $_observers = array( 'example', // will call Observer_Example class for all events 'Orm\\Observer_CreatedOn' => array( 'events' => array('before_insert'), // will only call Orm\Observer_CreatedOn at before_insert event ) ); }
Create Once we configure the model, we can start using the methods straightaway. Orm provides a save method to save the object into the database. We can set the data using configured properties as follows:
// option 1 $new = new Model_Employee(); $new->name = 'Jon'; $new->save();
// option 2, use forge instead of new $new = Model_Employee::forge();
60
FuelPHP
$new->name = 'Jon'; $new->save();
// option 3, use array for properties $props = array('name' => 'Jon'); $new = Model_Employee::forge($props); $new->save();
Read Orm provides a method, find to get fetch the data from the database and bind into the object. find method works depending on the input parameter. Let us look at the different options - by primary key - Specifying the primary key returns the record by matching the primary key of the configured table.
$employee = Model_Employee::find(1); first / last record - Specifying ‘first’ or ‘last’ will fetch the first record or the last record respectively. We can pass the order by option as well.
$entry = Model_Employee::find('first'); $entry = Model_Article::find('last', array('order_by' => 'id'));
All - Specifying ‘all’ will fetch all the records from the configured table. We can specify order by option as well as conditions.
$entry = Model_Employee::find('all');
$entry = Model_Article::find('all', array( 'where' => array( array('name', 'Jon'), ), 'order_by' => array('id' => 'desc'), ));
We can use Query API of basic database toolkit along with model for advanced search option as follows.
61
FuelPHP
$query = Model_Employee::query()->where('category_id', 1)->order_by('date', 'desc'); $number_of_employees = $query->count(); $latest_employee = $query->max('id'); $young_employee = $query->min('age'); $newest_employee = $query->get_one(); $employees = $query->limit(15)->get();
Update Updating the model is the same as creating, except instead of creating a new model just fetch the model to be updated using the find method, update the property and then call the save method as follows.
$entry = Model_Employee:find(4); $entry->name = 'Peter'; $entry->save();
Delete Orm provides a delete method to delete the model. Just fetch the object and call the delete method.
$entry = Model_Employee:find(4); $entry->delete();
Working Example Let's create a working example in this chapter to understand the model and database.
Create a Database Create a new database in MySQL server, using the following command.
create database tutorialspoint_fueldb
Then, create a table inside the database using the following command.
create table employee(id int primary key, name varchar(20), age int not null);
Configure the Database
62
FuelPHP
Let us configure the database using database configuration file, *fuel/app/config/db.php. Add the following changes to connect MySQL server.
return array( 'development' => array( 'type' => 'mysqli', 'connection' => array( 'hostname' => 'localhost', 'port' => '3306', 'database' => 'tutorialspoint_fueldb', 'username' => 'root', 'password' => 'pass', 'persistent' => false, 'compress' => false, ), 'identifier' => '`', 'table_prefix' => '', 'charset' => 'utf8', 'enable_cache' => true, 'profiling' => false, 'readonly' => false, ),
'production' => array( 'type' => 'mysqli', 'connection' => array( 'hostname' => 'localhost', 'port' => '3306', 'database' => 'tutorialspoint_fueldb', 'username' => 'root', 'password' => 'pass', 'persistent' => false, 'compress' => false, ), 'identifier' => '`',
63
FuelPHP
'table_prefix' => '', 'charset' => 'utf8', 'enable_cache' => true, 'profiling' => false, 'readonly' => false, ), );
Include ORM Package Update the main configuration file, fuel/app/config/config.php to include ORM package by adding the following configuration.
'always_load' => array( 'packages' => array( 'orm' ), ),
Now, ORM is enabled in your application.
Create Employee Model Create a new model, Employee under the model folder “fuel/app/classes/model”. It is defined as follows.
Employee.php
class Model_Employee extends Orm\Model { protected static $_connection = 'production'; protected static $_table_name = 'employee'; protected static $_primary_key = array('id'); protected static $_properties = array( 'id', 'name' => array( 'data_type' => 'varchar', 'label' => 'Employee Name', 'form' => array(
64
FuelPHP
'type' => 'text' ), ), 'age' => array( 'data_type' => 'int', 'label' => 'Employee Age', 'form' => array( 'type' => 'text' ), ), ); }
Create Action Create new action, action_model in Employee controller located at fuel/app/classes/controller/employee.php as follows.
class Controller_Employee extends Controller { public function action_model() { // db based sql command to delete all employees $query = db::query('delete from `employee`'); $query->execute('production');
// orm based query to add new employees $model = new model_employee(); $model->name = "john"; $model->age = 25; $model->save();
$model = new model_employee(); $model->name = "peter"; $model->age = 20; $model->save();
65
FuelPHP
// orm based query to fetch all employee data $data = array(); $data['emps'] = model_employee::find('all'); return response::forge(view::forge('employee/model', $data)); } }
Create View Now, create a view file model.php located at “fuel/app/views/employee”. Add the following changes in the file.
Now, request the URL, http://localhost:8080/employee/model and it will produce the following result.
Result
66
FuelPHP 12. FuelPHP ─ Form Programming
FuelPHP provides three classes, Form, Fieldset, and Input, to perform Form programming.
Form class provides an option to create all HTML forms elements.
Fieldset class provides an option to create html element through higher level methods, integrating the models and validation.
Input class provides an option to parse the data submitted through html forms as well as http parameters, server variables, and user agents.
In this chapter, let us learn Form programming in FuelPHP.
Form As discussed earlier, Form class provides methods to create html form elements and the important methods are as follows - open() open() is used to create a new form. It provides the following two parameters:
$attributes - attributes of form tag as array or just the action URL as string. $hidden - array of hidden field name and their values.
echo Form::open('/employee/add'); echo Form::open(array('action' => '/employee/add', 'method' => 'post')); close() close() simply closes the form.
echo Form::close(); input() input() creates html input element. It has the following three parameters,
$field - name of the input element $value - value of the input element $attributes - attributes of input element as array
echo Form::input('name', 'jon', array('style' => 'border: 20px;'));
67
FuelPHP
label element label creates html label element. It has the following three parameters,
$label - label to show $id - associated form element id $attributes - attributes of label element as array
echo Form::label('Employee Name', 'employee_name'); hidden hidden is similar to input method, except it sets the type of the input element to hidden password password is similar to input method, except it sets the type of the input element to password. radio radio is similar to input method, except it sets the type of the input element to radio. It has the following four parameters,
$field - name of the input element $value - value of the input element $checked - whether the item is checked or not (true / false) $attributes - attributes of input element as array
echo Form::label('Male', 'gender'); echo Form::radio('gender', 'Male', true); echo Form::label('Female', 'gender'); echo Form::radio('gender', 'Female'); checkbox checkbox is similar to input method, except it sets the type of the input element to checkbox. It has the following four parameters,
$field - name of the input element $value - value of the input element $checked - whether the item is checked or not (true / false) $attributes - attributes of input element as array
echo Form::label('Male', 'gender'); echo Form::checkbox('gender', 'Male', true);
68
FuelPHP
echo Form::label('Female', 'gender'); echo Form::checkbox('gender', 'Female'); file file is similar to input method, except it sets the type of the input element to file textarea textarea creates html textarea element. It has the following three parameters,
$field - name of the textarea element $value - value of the textarea element $attributes - attributes of textarea element as array
echo Form::textarea('description', 'original data (value)', array('rows' => 6, 'cols' => 8)); select select creates an HTML select element. It has the following four parameters:
$field - name of the select element $values - initial selection values $options - options as array. Options may be grouped using nested array $attributes - attributes of input element as array
echo Form::select( 'country', 'none', array( 'none' => 'None', 'asia' => array( 'in' => 'India', 'cn' => 'China' ), 'us' => 'United States' ) ); submit submit is similar to input method, except it sets the type of the input element to submit.
69
FuelPHP
button button creates html button element. It has the following three parameters,
$field - name of the button element $value - value of the button element $attributes - attributes of button element as array
echo Form::button('emp_submit', 'Submit'); reset reset is similar to input method, except it sets the type of the input element to reset fieldset_open fieldset_open creates html field set and legend elements. It has the following two parameters:
attributes - attributes of fieldset element as array legend - name of the legend to create
// returns
echo Form::fieldset_close();Input Class
Input class provides methods to read all request data along with form details. Some of the important methods are as follows: uri uri returns the current URI of the request
// request: http://localhost:8080/employee/welcome echo Input::uri(); // return /employee/welcome
70
FuelPHP
method method returns the HTTP method used in the request
echo Input::method() // "POST" get get enables to read $_GET variables. It has the following two parameters,
$index - index of the $_GET array $default - default value, if index is not found.
echo Input::get('age', '20'); // returns $_GET['age'] post post enables to read $_POST variables. It has the following two parameters,
$index - index of the $_POST array $default - default value, if index is not found
echo Input::get('age', '20'); // returns $_POST['age'] param param enables to fetch item from either $_GET, $_POST, $_PUT, or $_DELETE variables. It has the following two parameters,
$index - index of the array $default - default value, if index is not found
If no parameter is specified, it will return all items.
echo Input::param('age', '20'); // returns $_POST['age'] file file enables to read $_FILE variables. It has the following two parameters,
$index - index of the $_POST array $default - default value, if index is not found
echo Input::file();
71
FuelPHP
is_ajax is_ajax returns true, if the request is made through AJAX
echo Input::is_ajax() // return false protocol protocol returns the HTTP protocol used in the request
echo Input::protocol() // returns "HTTP" ip ip returns the IP address through which the request is made
echo Input::ip() // returns "84.45.34.24" (Public IP Address) real_ip real_ip tries to return the real IP address (if the client is behind proxy) through which the request is made
echo Input::real_ip() // returns "10.76.12.1" (local private IP Address) server server enables to read $_SERVER variables. It has the following two parameters,
$index - index of the $_POST array $default - default value, if index is not found.
echo Input::server('HTTP_HOST'); // returns localhost:8080 referrer referrer returns the referrer from $_SERVER variable. It is a shortcut method to get the http referrer of the current request user_agent user_agent returns the user agent from $_SERVER variable. It is a shortcut method to get the http user agent of the current request query_string query_string returns the query string from $_SERVER variable. It is a shortcut method to get the query string of the current request
72
FuelPHP
headers headers return the specific or all headers. It has the following two parameters:
$index - name of the HTTP headers $default - default value, if index is not found.
echo Input::headers('Content-Type'); // returns "text/html" extension extension returns the URI extension of the current request.
// Example URL: http://localhost/test/ echo Input::extension(); // NULL
// Example URL: http://localhost/test.html echo Input::extension(); // 'html'
Working Example Let’s create a simple form to add new employee using Form and Input class.
Create form Create new action, get_add in the employee controller as follows.
public function get_add() { return Response::forge(View::forge('employee/add')); }
Now, add view for the action, fuel/app/views/employee/add.php as follows.
73
FuelPHP
74
FuelPHP
Here, we have used bootstrap to design the form. FuelPHP provides full support for bootstrap components. Now, requesting the page, http://localhost:8080/employee/add will show the following form.
Process Form Create new action, post_add to process the form and add the employee data entered by the user into the database in the employee controller as follows.
public function post_add() { $name = Input::post('name'); $age = Input::post('age'); $model = new model_employee(); $model->name = $name; $model->age = $age; $model->save();
Response::redirect('employee/list'); }
Here, we have been redirected to employee list page, once the user entered data is saved into the database. Next, we will create the employee list page.
List Employee Create new action, action_list to list the employee in the database as follows.
public function action_list() { $data = array(); $data['emps'] = model_employee::find('all');
75
FuelPHP
return Response::forge(view::forge('employee/list', $data)); }
Create new view, fuel/app/views/employee/list for the above action as follows.
Check the Form Now, request the URL, http://localhost:8080/employee/add, enter some employee data as shown in the following screenshot and submit the form.
Then, it shows all the employees (including newly added one) available in the database as follows:
76
FuelPHP 13. FuelPHP ─ Validation
Validation is one of the frequent and most repeated tasks in a web application. The user enters the required data in the form and submits it. Then, the web application needs to validate the data before processing the data. For example, the user enters the employee data and the post_action needs to validate before saving it into the database. FuelPHP provides a really simple class, Validation for this purpose.
In FuelPHP, the concept of validation is very simple and it provides various methods through Validation class to properly validate the form. Following is the workflow of the validation,
Step 1: Create new Validation object using forge method.
$val = Validation::forge();
Step 2: Add the fields which needs to be validated using add method.
$val->add('name', 'Employee name');
Step 3: Set the validation rules for the added fields using add_rule method.
$val->add('name', 'Employee name')->add_rule('required'); $val->add('age', 'Employee age')->add_rule('required') ->add_rule('numeric_min', 20) ->add_rule('numeric_max', 30);
Step 4: Call the run method to validate the data.
// run validation on just post if ($val->run()) { // success } else { // falier }
Step 5: Use validated and error to get the valid and invalid fields respectively.
$vars = $val->validated(); $vars = $val->error();
77
FuelPHP
Rules FuelPHP contains a lot of rules to validate, and also provides an option to create new rules. The rules supported by the Validation class are as follows,
required - Value to be entered required_with - Set another field as a companion field. If the field is set, then companion fields need to be set as well
match_value - Set the value to be matched with the field's value match_pattern - Set the value to be matched as a regular expression with the field's value match_field - Set another field's value as value to be matched with the field's value match_collection - Set the value to be matched as collection with field's value min_length - Set the minimum length of the field's value max_length - Set the maximum length of the field's value exact_length - Set the exact length of the field's value valid_date - Set the field's value to a valid date valid_email - Set the field's value to a valid email valid_emails - Set the field's value to valid emails, separated by comma valid_url - Set the field's value to a valid URL valid_ip - Set the field's value to a valid IP numeric_min - Set the minimum value of the field's value numeric_max - Set the maximum value of the field's value numeric_between - Set the minimum and maximum value of the field's value valid_string - Similar to regex but simpler
$val->add('username', 'User name')->add_rule('valid_string', array('alpha, dots');
Here, alpha refers to alphabetical characters and dots refer to (.). The valid string is only the string which contains alphabetical character and (.). The other options are uppercase, lowercase, specials, numeric, spaces, etc.
Working Example We can update the add employee feature to include validation. Just update the post_add method of the employee controller as follows.
public function post_add() { $val = Validation::forge(); $val->add('name', 'Employee name')->add_rule('required'); $val->add('age', 'Employee age')->add_rule('required')
78
FuelPHP
->add_rule('numeric_min', 20) ->add_rule('numeric_max', 30);
if ($val->run()) { $name = Input::post('name'); $age = Input::post('age');
$model = new model_employee(); $model->name = $name; $model->age = $age; $model->save();
Response::redirect('employee/list'); } else { Response::redirect('employee/add'); } }
Here, we have specified the name and age as the required fields. The age needs to be between 20 and 30. If both rules are valid, then the employee data will be saved and redirected to employee list page. Otherwise, employee data will be rejected and redirected to add employee page.
79
FuelPHP 14. FuelPHP ─ Advanced Form Programming
FuelPHP provides an advanced form programming through Fieldset and Fieldset_Field classes. Fieldset provides an object-oriented way to create a form. It has complete support for models. It has built-in support for client-side and server-side validation as well. To create a full-fledged form, it is enough to create a model with proper form and validation setting. Let us learn about Fieldset class and how to create a form using it in this chapter.
Fieldset Fieldset is a collection of Fieldset_Field objects. Fieldset_Field defines the individual entry of a form such as firstname, lastname, etc. along with validations. Fieldset class has methods to add/edit/remove fields. It has options to identify the fields defined in a model and create the fields from the given model. Fieldset uses Form and Validation classes in the background to do the real work. Let us see some of the important methods of the Fieldset class. forge forge creates a new Fieldset instance. It has the following two parameters:
$name - identifier for the fieldset
$config - configuration array. Possible options are validation_instance and form_instance. validation_instance can have Validation object and form_instance can have Form object
$employee_form = Fieldset::forge('employee'); instance instance returns the previously created Fieldset instance by identifier.
$employee_form = Fieldset::instance('employee'); get_name Gets the identifier of the fieldset instance.
$employee_form = Fieldset::forge('employee'); $name = $employee_form->get_name();
80
FuelPHP
add add creates a new Fieldset_Field instance and add it to the current fieldset. It contains the following four parameters,
$name - name of the field $label - label for the field $attributes - HTML tag attributes $rules - validation rules
$employee_field = $employee_form->add('employee_lastname', 'Lastname', array('class' => 'pretty_input'));
// with validation rules $employee_form->add( 'email', 'E-mail', array('type' => 'email', 'class' => 'pretty_input'), array('required', 'valid_email') ); add_before add_before is similar to add, except it has one extra parameter to specify the field before which the newly created field will be added.
$employee_form->add_before('employee_firstname', 'Firstname', array('class' => 'pretty_input'), array(), 'employee_lastname'); delete delete deletes the specified field from the fieldset.
$employee_form->delete('employee_firstname'); field field gets either all the fields or the specified one from the fieldset.
$fields = $employee_form->field(); $lastname_field = $employee_form->field('employee_lastname');
81
FuelPHP
build build is alias for $this->form()->build(). Generates the HTML markup of the form.
$employee_form->build(Uri::create('employee/add')); enable enable re-enables a field that has been previously disabled.
$employee_form->enable('employee_firstname'); disable disable allows to disable a field in the fieldset from being build.
$employee_form->disable('employee_firstname'); form form returns the Form instance of the current fieldset.
$form = employee_form->form(); add_model add_model adds the model's field into the fieldset. It has the following three parameters,
$class - class name
$instance - instance of the class to populate the fields with value
$method - name of the method in the class. This method is used to add fields into the fieldset. Orm\Model has the required method. The default method name is set_form_fields.
$employee_form = Fieldset::forge('employee'); $employee_form->add_model('Model_Employee'); populate populate sets the initial value of the fields in fieldset using model instance.
$emp = new Model_Employee(); $emp->name = "Jon"; $employee_form->populate($emp);
82
FuelPHP
repopulate repopulate is same as populate, except it repopulates the fields in the fieldset. validation validation gets the validation instance of the current fieldset.
$validation = $employee_form->validation(); validated Alias for $this->validation()->validated(). input Alias for $this->validation()->input(). error Alias for $this->validation()->error(). show_errors Alias for $this->validation()->show_errors().
Working Example
Let’s create an advanced form to add new employee in our sample employee application using Fieldset class.
Update Model Update the employee model with necessary validation rules and add a validation observer as follows.
class Model_Employee extends Orm\Model { protected static $_connection = 'production'; protected static $_table_name = 'employee'; protected static $_primary_key = array('id'); protected static $_properties = array( 'id', 'name' => array( 'data_type' => 'varchar',
83
FuelPHP
'label' => 'Employee Name', 'validation' => array( 'required', 'min_length' => array(3), 'max_length' => array(80) ), 'form' => array( 'type' => 'text' ), ), 'age' => array( 'data_type' => 'int', 'label' => 'Employee Age', 'validation' => array( 'required', ), 'form' => array( 'type' => 'text' ), ), );
// Just add the Observer, and define the required event protected static $_observers = array('Orm\\Observer_Validation' => array( 'events' => array('before_save') )); }
Here, we have defined the validation rules for name and age fields and added a new observer to perform server side validation before saving the model into the database. The same validation rule will create necessary input validation attributes as well in the form.
Create Form Create new action, action_advancedform in the employee controller as follows.
public function action_advancedform() { // create a new fieldset and add employee model
84
FuelPHP
$fieldset = Fieldset::forge('employee')->add_model('Model_Employee');
// get form from fieldset $form = $fieldset->form();
// add submit button to the form $form->add('Submit', '', array('type' => 'submit', 'value' => 'Submit'));
// build the form and set the current page as action $formHtml = $fieldset->build(Uri::create('employee/advancedform'));
// set form in data $data = array(); $data['form'] = $formHtml;
return Response::forge(View::forge('employee/advancedform', $data, false)); }
Here, we have created the form using fieldset and send the form to the view. Next, add view for the action, fuel/app/views/employee/advancedform.php as follows.
86
FuelPHP
if(isset($errors)) { echo $errors; } echo $form; ?>
Now, requesting the page http://localhost:8080/employee/add will show the following form.
Process Form Update the action method, action_advancedform to process the form and add the employee data entered by the user into the database in the employee controller as follows.
public function action_advancedform() { // create a new fieldset and add employee model $fieldset = Fieldset::forge('employee')->add_model('Model_Employee');
// get form from fieldset $form = $fieldset->form();
// add submit button to the form $form->add('Submit', '', array('type' => 'submit', 'value' => 'Submit'));
87
FuelPHP
// build the form and set the current page as action $formHtml = $fieldset->build(Uri::create('employee/advancedform'));
if (Input::param() != array()) { try { $article = Model_Employee::forge(); $article->name = Input::param('name'); $article->url = Input::param('age'); $article->save(); Response::redirect('employee/list'); } catch (Orm\ValidationFailed $e) { $view = View::forge('employee/advancedform'); $view->set('form', $formHtml, false); $view->set('errors', $e->getMessage(), false); } } return Response::forge($view); }
Here, we have been redirected to employee list page, once the user entered data is validated and saved into the database. Otherwise, we will be shown the form again.
88
FuelPHP
Check the Form Now, request the URL, http://localhost:8080/employee/add and enter some employee data and submit the form. If the data is not provided, then the form will prompt the user to enter the data as shown in the following screenshot.
If the user bypasses the client side validation, then the server will validate the form and show an error as shown in the following screenshot.
If the data passed the client and server side validation, then the employee data will be saved into the database and the page gets redirected to list page.
89
FuelPHP 15. FuelPHP ─ File Uploading
File uploading is one of the most commonly used features in form programming. FuelPHP provides a special class, Upload to handle uploading of files. Let us learn how to upload a file using Upload class in this chapter.
Configuration
Upload class can be configured using separate configuration file, fuel/app/config/upload.php. The important configuration entries are as follows:
max_size - Set the maximum size of the file to be uploaded. “0” refers unlimited upload size
ext_whitelist - Set allowed file extensions ext_blacklist - Set disallowed file extensions type_whitelist - Set allowed file types. For example, “text” for mime type “text/plain” type_blacklist - Set disallowed file types mime_whitelist - Set allowed mime file types. For example, “text/plain” mime_blacklist - Set disallowed mime file types prefix - String to prefix in the filename while saving the uploaded file to the server suffix - String to suffix in the filename while saving the uploaded file to the server extension - Extension of the uploaded file to be set create_path - Whether to create the file path, if not available overwrite - Whether to overwrite the existing file while saving the uploaded file auto_rename - Whether to rename the file by adding a sequence number while saving the uploaded file
randomize - Whether to create a random 32-character name to save the uploaded file
Upload Methods Upload class provides options to process and save the file uploaded by the users. Every processed file (before saving) will have the following information in the result array.
field - Name of the form field name - Name of the file uploaded type - Type of the file as defined by the browser mimetype - Type of the file as defined by Upload class file - Fully qualified name of the temporary location of the uploaded file filename - Filename of the uploaded file extension - Extension of the file uploaded
90
FuelPHP
size - Size of the file uploaded in bytes errors - Array of error having error code and message error - Whether to set array errors with why the upload fails (in case of failure in upload)
Once the files are saved in the server, the result array will have the following information as well.
saved_to - Fully qualified path where the uploaded file was saved saved_as - Name of the file that was saved errors - Updated error array
Now, let us see the method of Upload class. is_valid is_valid returns true, if any valid file is uploaded by the user.
// do we have any uploaded files to save? if (Upload::is_valid()) { // process } get_files get_files return all the uploaded files as multi-dimensional array. If an index/name of the form's file input is specified, then it will return the uploaded file related to the specified file input only.
foreach(Upload::get_files() as $file) { // do something with the file info }
if ( Upload::get_files(0)) { // do something } get_errors get_errors returns an array of errors, if there is a failure to upload one or more files. If an index/name of the form's file input name is specified, then it will return the error related to the specified file input only.
91
FuelPHP
foreach(Upload::get_errors() as $file) { // do something with the file info }
if (Upload::get_errors('myimage')) { // do something } process process refers to the actual process of gathering information about the uploaded file. We can supply a new custom configuration using array. If no configuration is specified, then it will use the configuration defined in fuel/app/config/upload.php
Upload::process(array( 'auto_rename' => false, 'overwrite' => true )); save save refers to the actual process of saving all the validated files in a proper location. We can specify the index to save only that particular entry.
Upload::save(); Upload::save(0); Upload::save(0, 3);
Working Example
Let us create a new controller, Controller_Upload in our employee sample to test the upload functionality.
Step 1: Create a file, fuel/app/classes/controller/upload.php. Create upload controller.
92
FuelPHP
Step 2: Create a new action get_upload.
class Controller_Upload extends Controller { public function get_index() { return \View::forge("upload/index"); } }
Step 3: Create a new view for the action created.
Step 4: Create a new action post_action to process the uploaded file.
class Controller_Upload extends Controller { public function get_index() { return \View::forge("upload/index"); }
public function post_index()
93
FuelPHP
{ $config = array( 'path' => DOCROOT.'files', 'randomize' => true, 'ext_whitelist' => array('img', 'jpg', 'jpeg', 'gif', 'png'), );
Upload::process($config);
// if there are any valid files if (Upload::is_valid()) { Upload::save(); echo "success"; } else { // and process any errors foreach (Upload::get_errors() as $file) { echo var_dump($file); } } } }
Finally, run the application by requesting the url, http://localhost:8080/upload/index and try to upload file.
Result
94
FuelPHP 16. FuelPHP ─ Ajax
AJAX is a modern technology in web programming. It provides options to send and receive data in a webpage asynchronously, without refreshing the page. Let us learn about FuelPHP AJAX programming in this chapter.
FuelPHP framework provides options to identity whether the request type is AJAX or not. Input class has a method, is_ajax() for this purpose. If an AJAX request is made, Input::is_ajax method returns true, otherwise false.
This method is used to handle an AJAX request properly on the server side.
if (Input::is_ajax()) { // Ajax request } else { // Normal request }
We can use json_encode to return the JSON response. We can combine these two methods to create a simple and clean AJAX based web application.
Working Example Let us add a new page, ajax/index in employee application and try to fetch the employee information asynchronously.
Step 1: Create a new controller, Controller_Ajax at fuel/app/classes/controller/ajax.php.
class Controller_Ajax extends Controller { }
Step 2: Create a new action, action_index as follows.
class Controller_Ajax extends Controller { public function action_index() { $emps = model_employee::find('all'); $data = array();
95
FuelPHP
$i = 0; foreach($emps as $emp) { $data[$i] = array(); $data[$i]['name'] = $emp['name']; $data[$i]['age'] = $emp['age'];
$i = $i + 1; }
if(\Input::is_ajax()) { echo json_encode($data); } else { return \View::forge("ajax/index"); } } }
Here, if the request is AJAX, we fetch student information, encode it as JSON, and return it. Otherwise, we just render the corresponding view.
Step 3: Create corresponding view file, fuel/app/views/ajax/index.php as follows.
Load employee information
Here, we have created an anchor tag (id: loademployee) to load the employee information using AJAX call. The AJAX call is done using JQuery. Event attached to loademployee tag activates when a user clicks it. Then, it will fetch the employee information using AJAX call and generate the required HTML code dynamically.
Step 4: Run the application.
Finally, run the application, http://localhost:8000/ajax/index and click the Load employee information anchor tab.
Result
98
FuelPHP 17. FuelPHP ─ HMVC Request
FuelPHP provides an excellent feature to request an action inside the same application using Request class. This is called HMVC Request. It enables to reuse the controller logic.
Creating a HMVC Request Creating a HMVC request is as simple as creating a request object with the required URL and call the execute method as follows.
$list = Request::forge('employee/list/')->execute(); echo $list;
$employee = Request::forge('employee/show/1')->execute(array('id' => '1')); echo $employee;
Working Example Let us create a new controller, Controller_HMVC to test the HMVC feature. Create a file, fuel/app/classes/controller/hmvc.php and place the following code.
execute(); } }
Here, we have just called the employee/list page through HMVC request and shown the result.
Result
99
FuelPHP 18. FuelPHP ─ Themes
Themes are used to enable multiple look and feel for the application. It provides option for the user/developer to change the look and feel of the application without disturbing the functionality of the application. An application can have one or more themes. Each theme lives in its own folder. Let us learn how to create themes in this chapter.
Theme Configuration
FuelPHP provides a separate configuration file for themes, fuel/app/config/themes.php. All theme related settings are configured in this file. Some of the main theme settings are as follows -
active - Name of the active theme fallback - Name of the fallback theme, if active theme is not found paths - Array of the path to search and find themes assets_folder - Normally, assets need to be inside DOCPATH so that it will be accessible through web. It refers to the asset folder for the themes inside the DOCPATH
view_ext - Extension of the theme's view file info_file_name - File having extended information about themes require_info_file - Whether to require the theme information file, info_file_name use_modules - Whether to use current module or not
Simple configuration for the theme file is as follows.
return array( 'active' => 'tpthemes', 'fallback' => 'tpthemes', 'paths' => array( APPPATH.'themes', ), 'assets_folder' => 'assets', 'view_ext' => '.html', 'require_info_file' => false, 'info_file_name' => 'themeinfo.php', 'use_modules' => false, );
100
FuelPHP
Here we have set,
The name of the active and fallback theme as tpthemes The path of the theme folder as fuel/app/themes/ The path of the asset folder as /public/assets/tpthemes/
Theme Class Once the configuration is done, we can use the class, Theme provided by FuelPHP to do the functionality of the theme. Let us know about the methods available in the Theme class in this chapter. instance instance method enables to create a new theme. It has the following two parameters,
$name - Name of the theme (optional) $config - Theme configuration array (same as seen in configuration section)
Both parameters are optional. If no parameter is specified, it tries to get the default theme from the configuration file. If the theme name is specified, it tries to get the other settings from the configuration file. If configuration is specified as well, then it will use the user specified setting instead of setting from the configuration file.
$theme = \Theme::instance(); $theme = \Theme::instance('tpthemes'); $theme = \Theme::instance( 'mytheme', array( 'active' => 'mytheme', 'view_ext' => '.php' ) ); forge forge is similar to instance, except it only has configuration array.
$theme = \Theme::forge(array( 'active' => 'tpthemes', 'fallback' => 'tpthemes', 'view_ext' => '.php', ));
101
FuelPHP
view view method uses the View::forge() in the background. Both API are similar except view method searches the view file in the themes folder, fuel/app/themes/tpthemes/ instead of fuel/app/views/ folder.
$theme = \Theme::instance(); $view = $theme->view('template/index'); // *fuel/app/themes/tpthemes/template/index.php presenter presenter method uses the Presenter::forge() in the background. Both API are similar except presenter method searches the view file in the themes folder, fuel/app/themes/tpthemes/ instead of fuel/app/views/ folder.
$theme = \Theme::instance(); $presenter = $theme->presenter('template/index'); asset_path asset_path method returns the path to the asset requested relative to the currently selected theme.
$theme = \Theme::instance();
// public/assets/tpthemes/css/style.css $style = \Html::css($theme->asset_path('css/style.css')); add_path add_path method allows to add a theme path at runtime.
$theme = \Theme::instance(); $theme->add_path(DOCROOT.'newthemes'); add_paths add_paths method allows to add multiple theme path at runtime.
$theme = \Theme::instance(); $theme->add_path(DOCROOT.'newthemes');
102
FuelPHP
active active method allows to set the active theme.
$theme = \Theme::instance(); $active = $theme->active('newtheme'); fallback fallback method allows to set the fallback theme.
$theme = \Theme::instance(); $fallback = $theme->fallback('custom'); get_template get_template method will return the View instance of the currently loaded theme template.
$theme = \Theme::instance(); $theme->get_template()->set('body', 'Theme can change the look and feel of your app'); set_template set_template method allows to set the theme template for the page.
$theme = \Theme::instance(); $theme->set_template('layouts/index')->set('body', 'set theme template'); find find returns true, if the path to the theme is found, otherwise it returns false.
$theme = \Theme::instance(); $path = $theme->find('newtheme') all all method returns an array of all themes in all theme paths.
$theme = \Theme::instance(); $themes = $theme->all();
103
FuelPHP
get_info get_info method returns a specific variable from the theme info array. If no theme is specified, the info array of the active theme is used.
$theme = \Theme::instance(); $var = $theme->get_info('color', 'green', 'newtheme');
Here, the method get the color is defined in ‘newtheme’. If it is not defined, then it will use ‘green’ as the default color. set_info set_info method sets a variable in the active or fallback theme.
$theme->set_info('color', 'green', 'fallback'); set_partial set_partial method allows to set a view partial for a named section of your page template. Usually, it is done via HMVC call.
$theme = \Theme::instance(); $theme->set_template('layouts/homepage'); $theme->set_partial('navbar', 'homepage/navbar'); get_partial get_partial method allows to get the view instance of a previously set partial in a named section of your page template.
$theme = \Theme::instance(); $theme->set_partial('sidebar', 'partials/menu'); $theme->get_partial('sidebar', 'partials/menu')->set('class', 'menu green');
Working Example Let us add theme support in our employee application.
Step 1: Add new theme configuration file, fuel/app/config/theme.php with the following content.
return array( 'active' => 'tpthemes',
104
FuelPHP
'fallback' => 'tpthemes', 'paths' => array( APPPATH.'themes', ), 'assets_folder' => 'assets', 'view_ext' => '.html', 'require_info_file' => false, 'info_file_name' => 'themeinfo.php', 'use_modules' => false, );
Step 2: Add new asset folder, public/assets/tpthemes/css for the theme, tpthemes.
cd /go/to/app/root/path mkdir -p public/assets/tpthemes/css
Step 3: Download the latest bootstrap and place the bootstrap.min.css under public/assets/tpthemes/css
Step 4: Add new folder, tpthemes under fuel/app/themes folder.
cd /go/to/app/root/path mkdir -p fuel/app/themes/tpthemes
Step 5: Add new layout template, bootstrap.html under fuel/app/themes/tpthemes/layout/ and add the following code.
105
FuelPHP
Here, we have used theme instance and asset method to get the path of the bootstrap file. We have defined two variables, header and content. header is defined to set the header details dynamically. content is defined to set the actual content of the page dynamically.
Step 6: Add new header template, header.php at fuel/app/themes/tpthemes/partials as follows.
Theme support in fuelphp
bootstrap based template
Step 7: Create a new controller, ThemeSample at fuel/app/classes/controller/themesample.php and action at action_index as follows.
class Controller_ThemeSample extends \Controller { public function before() { $this->theme = \Theme::instance(); $this->theme->set_template('layouts/bootstrap');
$header = $this->theme->view('partials/header'); $this->theme->get_template()->set('header', $header); }
public function action_index() { $content = $this->theme
106
FuelPHP
->view('themesample/index') ->set('message', 'This data comes from action page');
$this->theme ->get_template() ->set('content', $content); } public function after($response) { if (empty($response) or ! $response instanceof Response) { $response = \Response::forge(\Theme::instance()->render()); } return parent::after($response); } }
Here, we have used before and after method to do the initialization of the theme using methods of Theme class. Some of the methods used are instance, get_template, set_template, and view.
Step 8: Finally, add view for the index action, index.php at fuel/app/themes/tpthemes/themesample as follows.
The data comes from *fuel/app/themes/tpthemes/themesample/index.html* file.
Here, we have defined one variable, message, which needs to be set dynamically in the controller.
107
FuelPHP
We have created a new theme, tpthemes and used it in ThemeSample controller. Let us now check the result by requesting the URL, http://localhost:8080/themesample/index. The result is as follows.
108
FuelPHP 19. FuelPHP ─ Modules
Module is a great way to write reusable web functionalities such as blog, album, chat, etc. Module does not disturb the other code in the web application. It lives in its own folder and silently provides its functionality. Modules are simply the same controller, models, and views except that they are grouped, configured, and placed in a special folder. Usually, a module typically resides within the application's sub-directory named modules located at fuel/app/modules.
Module Configuration We can define the modules path in the main application configuration file, fuel/app/config/config.php as follows.
'module_paths' => array( path/to.’modules'.DS, // path to application modules path/to.’..’.DS.'globalmods'.DS // path to our global modules ),
Module Namespace
In FuelPHP, every module has its own PHP namespace. Setting separate namespace fixes the name clashes. For example, an employee module can be set under namespace, EmployeeModule as follows.
namespace Employeemodule;
class Controller_Employee { //code here }
Module must be named identical to the folder name of the module.
109
FuelPHP
Module Structure We can create a module by creating a folder name defined in the configuration. The folders name determines the name of the module, and the name of the namespace for the classes in the module.
The structure of the module is as follows:
classes o controller o model o view config lang tasks views
Module can have its own configuration files. It is very useful in the routing setup and it does not disturb the original configuration of the application. Another important concept is that, the module class can be reused by loading the module in the always_load configuration section as follows.
'always_load => array( 'modules' => array('employeemodule'), ),
Also, modules can be loaded and used instantly without configuring as follows.
Module::load('employeemodule');
\Employeemodule\Myclass::mymethod('params');
110
FuelPHP 20. FuelPHP ─ Packages
Packages are similar to modules in code reuse but differs in the following ways,
It does not map to the web URLs It is not approachable through HMVC requests
In short, packages are not direct web functionalities such as blog, album, etc. Instead, it is a library of functions grouped together such as email processing, document creation, chart creation, authentication, etc. which aids in faster development of the web application.
Creating Packages To create a package, first we need to arrange our source code specified as follows.
/fuel /packages /package (root directory of package) /bootstrap.php /classes /our.php /classes.php /here.php /config /config.php /and_so_on
The structure of the package has two package specific files, config.php and bootstrap.php files. The purpose of the configuration file is to group the configuration of the package under the package folder itself without disturbing the main application. The purpose of the bootstrap file is to set the namespace so that the autoloader loads it properly.
Some ways to set the namespace is as follows,
Autoloader::add_namespace('Mypackage', __DIR__.'/classes/'); Autoloader::add_core_namespace('Mypackage'); Autoloader::add_core_namespace('Mypackage', true); Autoloader::add_classes(array( 'Mypackage\\Classname' => __DIR__.'/classes/classname.php', 'Mypackage\\Anotherclass' => __DIR__.'/classes/anotherclass.php', ));
111
FuelPHP
Once the bootstrap file is properly configured and packages are loaded into the application, we can use it as follows.
$instance = new Myclass; $instance = new Mynamespace\Myclass;
Installing Packages
Packages are usually placed under fuel/packages directory. By default, the following packages are installed,
auth - Authentication package email - Email package oil - Fuel's command, oil package orm - ORM package parser - Markdown parser package
To install a new package, following are the two options,
Option 1: Manual installation - download and install
To manually install the package, first download the package from the author's website. Unpack it and place it under fuel/packages/ folder.
Option 2: Automatic method using oil command
FuelPHP provides an automated way of installing the packages hosted in github. Use the following command to install the package, mytestpackage
php oil package install mytestpackage
It clones the package source code using git client and moves it to fuel/packages folder. If git client is not available, then we can use –direct command argument to direct the command to download and install the packages as follows.
php oil package install mytestpackage --direct
Using Packages
Packages can be used in the application once it is loaded into the application. There are two ways to load the packages into the application.
Option 1: Through Package class
FuelPHP provides a class, Package to load, unload, and check the availability of the packages through load, unload, and loaded methods, respectively. load method has two parameters. The first parameter, $package is the name of the package and second parameter, path is the path of the package. The second parameter is optional, if the package is installed in fuel/packages folder.
112
FuelPHP
// load the orm package Package::load('orm');
// load the parser package from a specific directory Package::load('parser', '/path/to/packages/dir/');
// load the non-existent package Package::load('awesome'); // Throws a PackageNotFoundException
Option 2: Through configuration file
To load a package permanently, just add the package under always_load configuration entry in the main configuration file, fuel/app/config/config.php. To load email package, use the following syntax.
'always_load' => array( 'packages' => array( 'email', ), ),
Once packages are loaded into the application, we can use it as follows.
$instance = new Myclass; $instance = new Mynamespace\Myclass;
113
FuelPHP 21. FuelPHP ─ Cookie & Session Management
Cookie provides client side data storage and it supports only a small amount of data. Usually, it is 2KB per domain and it depends on the browser. Session provides server side data storage and it supports a large amount of data. Let us go through how to create cookie and session in FuelPHP web application.
Cookies FuelPHP provides a Cookie class to create a cookie item. Cookie class is used to create, assign, and delete cookies.
Configure Cookie The Cookie class can be configured globally through the main application configuration file, located at fuel/app/config/config.php. It is defined as follows.
'cookie' => array(
//Number of seconds before the cookie expires 'expiration' => 0,
//Restrict the path that the cookie is available to 'path' => '/',
//Restrict the domain that the cookie is available to 'domain' => null,
// Only transmit cookies over secure connections 'secure' => false,
// Only transmit cookies over HTTP, disabling Javascript access 'http_only' => false, ),
114
FuelPHP
Methods Cookie class provides methods to create, access, and delete a cookie item. They are as follows: set() set method is used to create a Cookie variable. It contains the following arguments,
$name - The key in the $_COOKIE array. $value - The value of the cookie. $expiration - Number of seconds the cookie should last for. $path - The path on the server in which the cookie will be available on. $domain - The domain that the cookie is available to. $secure - Set to true if you only want to transmit cookies over secure connections. $httponly - Allow only transmit of cookies over HTTP, disabling JavaScript access.
Cookie::set('theme', 'green'); get() The get method is used to read a Cookie variable. It contains the following arguments,
$name - The key in the $_COOKIE array. $value - The value to return if the key is not available i the $_COOKIE array.
Cookie::get('theme'); delete() The delete method is used to delete a Cookie variable. It contains the following arguments,
$name - The key in the $_COOKIE array. $value - The value of the cookie. $domain - The domain that the cookie is available to. $secure - Set to true if you only want to transmit cookies over secure connections. $httponly - Allow only to transmit cookies over HTTP, disabling JavaScript access.
Cookie::delete('theme');
115
FuelPHP
Session FuelPHP provides class, Session to maintain state of the application.
Configure Session Session class can be configured through the special configuration file, fuel/core/config/session.php. Some of the important configuration entries are as follows:
auto_initialize - Initialize the session automatically.
driver - Name of the session driver. Session is implemented using driver and the possible options are cookie, db, memcached, redis, and file. The default driver is cookie.
match_ip - Check the client IP. match_ua - Check the client user agent. expiration_time - Session time out value in seconds. rotation_time - Time to renew the session.
Session Methods Session class provides methods to manipulate the session data. They are as follows, instance() The instance method returns a default or a specific instance, which is identified by name.
$session = Session::instance(); // default instance $session = Session::instance('myseesion'); // specific instance set() The set method is used to assign a Session variable.
Session::set('userid', $userid); get() The get method allows you to retrieve the stored variables from the session.
$userid = Session::get('userid'); delete() The delete method allows you to delete a stored session variable.
Session::delete('userid');
116
FuelPHP
create() The create method allows you to create a new session. If a session is already present, it will be destroyed and a new session is created.
Session::create(); destroy() The destroy method is used to destroy an existing session.
Session::destroy(); read() The read method allows you to read a session.
Session::read(); write() The write method allows you to write the session.
Session::write(); key() The key method allows you retrieve elements of the session key. The value of the key is unique.
$session_id = Session::key('session_id');
117
FuelPHP 22. FuelPHP ─ Events
An event is an action or occurrence recognized by the program that may be handled by the program itself. For example, we may define an action or event named my_fuel_event and then do some work whenever the event, my_fuel_event is called. FuelPHP provides class, Event to work with the events in the application.
System Events FuelPHP defined some of the event through which we can do some work whenever the defined events are called or fired by the application. This help is changing the behavior of the FuelPHP without changing the FuelPHP's core code files. The pre-defined events are as follows:
app_created - This event will be triggered after the FuelPHP framework has been initialized.
request_created - This event will be triggered after a new Request object has been forged.
request_started - This event will be triggered when execution of a request is requested.
controller_started - This event will be triggered before the controllers before() method is called.
controller_finished - This event will be triggered after the controllers after() method has been called and the response is received.
response_created - This event will be triggered after a new Response object has been forged.
request_finished - This event will be triggered when execution of a Request is complete and a response is received.
shutdown - This event will be triggered after the main request has been processed and the output has been sent.
We can handle the events in the special configuration file, fuel/app/config/events.php as follows:
return array( 'fuelphp' => array( 'app_created' => function() { // After FuelPHP initialised
118
FuelPHP
}, 'request_created' => function() { // After Request forged }, 'request_started' => function() { // Request is requested }, 'controller_started' => function() { // Before controllers before() method called }, 'controller_finished' => function() { // After controllers after() method called }, 'response_created' => function() { // After Response forged }, 'request_finished' => function() { // Request is complete and Response received }, 'shutdown' => function() { // Output has been send out }, ), );
119
FuelPHP
Event Methods Event class provides methods to register, unregister, and fire events. They are as follows, register()
The register method allows files to register an object that will be run when the trigger method is called.
$my_event_code = function() { echo 'my event'; } Event::register('my_event', $my_event_code); unregister() The unregister method allows the files to unregister an object that would be run when the trigger method is called.
Event::unregister('my_event', $my_event_code); trigger() The trigger method is used to trigger or activate callbacks that are associated through the register method.
Event::trigger('my_event'); has_events() The has_events method is available so you can check if a particular registered event has triggers.
Event::has_events('my_event'); forge() The forge returns a new event object.
$event = Event::forge(); instance() The instance returns a new event object singleton.
$event = Event::instance('event_instance');
120
FuelPHP 23. FuelPHP ─ Email Management
Email functionality is the most requested feature in a web framework. FuelPHP provides an elegant email class bundled as a package. It is used to send simple plain text email as well as advanced rich text email with multiple attachments. It supports the following features - Plain-text mails, HTML mails, attachments, and inline attachments.
Configuration To enable email functionality in the application, we need to just load the email package as specified below in the main configuration file, fuel/app/config/config.php.
'always_load' => array( 'packages' => array( 'email', ), ),
Another option is to load the email package, the controller itself as follows.
\Package::load('email');
The email setting can be done in the main configuration file and some of the important options are as follows,
driver - Email driver such as smtp is_html - Whether to send mail as HTML content or not priority - Priority of the email smtp.host - SMTP server host smtp.port - SMTP server port smtp.username - SMTP server username smtp.password - SMTP server password smtp.timeout - SMTP timeout smtp.starttls - Whether the SMTP server needs STARTTLS command
Email API Following are the API provided by the email and email driver class. forge Purpose: To create an instance of email driver. It creates the driver based on the configuration or input it receives. Email driver provides features to create and send mail. Some of the possible email drivers are smtp, sendmail, mailgun, and mandrill.
121
FuelPHP
Parameter: None or array of configuration details Returns: Returns the Email_Driver object
For example,
$email = \Email::forge();
$email = \Email::forge(array( 'driver' => 'smtp', )); body Purpose: To set the message body Parameter: $body - message body Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->body('Body message');
//or pass it a View $email->body(\View::forge('my/view', $data); alt_body Purpose: To set the alternative message body Parameter: $alt_body - alternative message body Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->alt_body('Body message');
//or pass it a View $email->alt_body(\View::forge('my/view', $data);
122
FuelPHP
priority Purpose: To set the mail's priority Parameter: o $priority - value of the priority. The options are:
a. \Email::P_LOWEST * \Email::P_LOW * \Email::P_NORMAL * \Email::P_HIGH * \Email::P_HIGHEST
Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->priority(\Email::P_HIGHEST); html_body Purpose: To set the message body in HTML format
Parameters:
o $html - message body in HTML; o generate_alt - whether to generate alternative message; o auto_attach - whether to embed the image or not
Returns: Returns the current instance
For example,
$email = \Email::forge();
// Do generate the alt body, but don't auto attach images. $email->html_body(\View::forge('welcome/email', $data), true, false);
123
FuelPHP
from Purpose: To set the from address Parameters: o $from - from email address; o $name - Name of the sender Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->from('[email protected]', 'My Name'); subject Purpose: To set the subject of the message Parameter: $subject - subject of the email message Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->subject('Suject of the mail message'); to Purpose: To set the receiver email address
Parameters:
o $email - email address or array of email address; o $name - receiver name
Returns: Returns the current instance
For example,
$email = \Email::forge();
$email->to('[email protected]', 'My Dear Name'); $email->to(array( '[email protected]', '[email protected]' => 'My Dear friend', ));
124
FuelPHP
header Purpose: To set custom header to the email message Parameters: o $header - header type or array of header; o $value - value of the header Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->header('X-SMTPAP', 'XXXXXXXX'); $email->reply_to(array( 'X-SMTPAP' => 'XXXXXX', 'X-SMTPAP2' => 'XXXXXA', )); attach Purpose: To attach a file to the email message
Parameters:
o $file - file path; o $inline - whether to attach the file inline or not; o $cid - content identifier; o $mime - MIME type of the attachment file; o $name - attachment file name override
Returns: Returns the current instance
For example,
$email = \Email::forge(); $email->attach(DOCROOT.'attachments/sample_attachment.pdf'); send Purpose: To send the mail. Parameter: o $validate - whether to validate the email addresses
Returns: true or false
125
FuelPHP
For example,
$email = \Email::forge(); try{ $email->send(); } catch(\EmailSendingFailedException $e) { // The driver could not send the mail. } catch(\EmailValidationFailedException $e) { // One or more email addresses failed validation. }
Working Email Sample Let us use the API learned in the previous chapter and create a simple code to send a message. Following is the simplest code to send a message.
$email = Email::forge(); $email->from('[email protected]', 'person1'); $email->to('[email protected]', 'person2'); $email->subject('Add something'); $email->body('contents of mail'); $email->send();
126
FuelPHP 24. FuelPHP ─ Profiler
Profiler is one of the important tools to analyze and improve the performance of the application. FuelPHP provides an excellent profiler to profile the application. Let us learn about the profile in FuelPHP in this chapter.
Enable Profiling
Profiling is disabled by default. To enable profiling, set the attribute profiling to true in the main configuration file, fuel/app/config/config.php as follows.
'profiling' => true,
Now, profiling is enabled in the application. Once profiling in enabled, all requested pages will show an extra tab at the bottom of the page with profiling information as shown in the following screenshot.
Profiler Information The Profiler has a tabbed interface and it consists of the following data,
Console - Provides information about errors, log entries, memory usage, or execution timings.
Load time - Shows request load time. Database - The number of queries executed and the execution time. Memory - Total memory used for the request.
127
FuelPHP
Files - Shows all PHP files. Config - Configuration contents at the end of the request. Session - Session contents at the end of the request. GET - The contents of the $_GET array. POST - The contents of the $_POST array.
Profiler Class The profiler class is used to add your profiling information. It implements a customized version of PHPQuickProfiler (PQP). Profiler contains a collection of javaScript variables to control the initial state of the Profiler.
Profiler class supports the following methods: mark() mark method will add a speed marker to the profiler. It shows the load time.
Profiler::mark('my custom code'); mark_memory() *mark_memory* method adds a memory marker to the profiler. If no input is specified, the memory usage at that point of time is logged. If we specify the variable and a label for the variable as shown below, then it will show the memory usage of the variable and label it using the specified label.
mark_memory($this, 'My Employee Controller memory usage'); console() The console method will simply add a log entry to the profiler.
Profiler::console('log entry');
128
FuelPHP 25. FuelPHP ─ Error Handling & Debugging
FuelPHP provides an excellent support for handling the errors and debugging the application. Let us understand error handling and debugging in this chapter.
Error Handling FuelPHP error handling is based on exceptions. FuelPHP provides PhpErrorException exception for all old php errors. FuelPHP raises PhpErrorException whenever an error in the PHP code is encountered. FuelPHP also makes it easy to display custom error pages for various HTTP status codes.
File Not Found Error FuelPHP provides a new exception class, HttpNotFoundException to handle the unknown requests. Sometimes, we may encounter the request which may not be handled. At that time, we can just throw the HttpNotFoundException.
By default, a default page is configured for HttpNotFoundException in the routes configuration file, fuel/app/config/routes.php using 400 entry. Whenever HttpNotFoundException is raised, the request will get redirected to 400 page.
'_404_' => 'welcome/404', // The main 404 route
Internal Errors FuelPHP provides a new exception class, HttpServerErrorException to handle all server errors. Sometimes, we may not be able to process the given request due to internal errors. At that time, we can just throw the HttpServerErrorException.
By default, a default page is configured for HttpServerErrorException in the routes configuration file, fuel/app/config/routes.php using 500 entry. Whenever HttpServerErrorException is raised, the request will get redirected to 500 page.
'_500_' => 'welcome/500', // The main 500 route
This page will log the error, show the will formatted error in the page and occasionally send a notification to the system administrator.
Access Violation Errors FuelPHP provides a new exception class, HttpNoAccessException to handle the access violations. Sometimes, we may not be able to process the request due to access restriction. At that time, we can just throw the HttpNoAccessException.
By default, a default page is configured for HttpNoAccessException in the routes configuration file, fuel/app/config/routes.php using 403 entry. Whenever HttpNoAccessException is raised, the request will get redirected to 403 page.
'_403_' => 'welcome/403', // The main 403 route
129
FuelPHP
This page will show the access violation information.
Debugging
Debugging is one of the most frequent activities developing an application. FuelPHP provides a simple class, Debug to handle the debugging activity of the application. Let us learn the Debug class and its methods in this chapter.
Debug Class Debug class provides utility methods to show the detailed information of variables, objects, array, etc. Debug class provides the following methods, dump The dump method returns multiple mixed values to the browser in a formatted structured way.
Debug::dump($var1, $var2); backtrace() backtrace shows the detailed information about the current execution of code. It shows the PHP file information, current line, and all its previous actions.
Debug::backtrace(); classes() Returns a list of all classes.
Debug::classes(); interfaces() Returns a list of all interface classes.
Debug::interfaces(); includes() Returns a list of all included files currently loaded at the runtime.
Debug::includes();
130
FuelPHP
functions() Returns a list of all functions.
Debug::functions(); constants() Returns a list of all constants.
Debug::constants(); extensions() Returns a list of all extensions.
Debug::extensions(); headers() Returns a list of all HTTP headers.
Debug::headers(); phpini() Prints a list of the configuration settings read from php.ini file.
Debug::phpini();
131
FuelPHP 26. FuelPHP ─ Unit Testing
Unit testing is an essential process in developing large projects. Unit tests help to automate the testing of the application’s components at every stage of development. It alerts when the component of the application is not working according to the business specification of the project. Unit testing can be done manually but is often automated.
PHPUnit FuelPHP framework integrates with the PHPUnit testing framework. To write a unit test for the FuelPHP framework, we need to set up the PHPUnit. If PHPUnit is not installed, then download and install it. We can confirm the availability of PHPUnit in our system using the following command.
phpunit --version
If PHPUnit is available, you will see the result similar to the following.
PHPUnit 5.1.3 by Sebastian Bergmann and contributors.
Creating Unit Tests
The standard location provided by FuelPHP to write unit test is fuel/app/tests. We can write the unit test for controller, model, view and presenters in separate folders. Let us write a unit test to validate the Model_Employee object.
Step 1: Create a folder, model under fuel/app/tests folder
Step 2: Create a file, employee.php under fuel/app/tests/model/ folder
Step 3: Create a new test class, Test_Model_Employee by extending TestCase class provided of PHPUnit
Step 4: Write a method, testInstanceOfEmployee() to asset the employee object creation using assertInstanceOf() method provided by PHPUnit's TestCase class.
Following is the complete code:
assertInstanceOf(Model_Employee::class, new Model_Employee()); } }
132
FuelPHP
Creating a Test Group FuelPHP provides an option to create a group of test cases. Creating a group is as simple as adding docblock attribute, @group. Let us include our test case inside the MyTest group.
/** * @group MyTest */ class Test_Model_Employee extends TestCase { public function testInstanceOfEmployee() { $this->assertInstanceOf(Model_Employee::class, new Model_Employee()); } }
Run Test To run all the test in the directory, use the following command.
$ php oil test
To run a specific group of tests, use the following command.
$ php oil test --group=MyTest
After executing the command, you will receive the following response.
Tests Running...This may take a few moments. PHPUnit 5.1.3 by Sebastian Bergmann and contributors.
1 / 1 (100%). Time: 123 ms, Memory: 8.00Mb
OK (1 test, 1 assertion)
133
FuelPHP 27. FuelPHP ─ Complete Working Example
In this chapter, we will learn how to create a complete MVC based BookStore application in FuelPHP.
Step 1: Create a project Create a new project named “BookStore” in FuelPHP using the following command.
oil create bookstore
Step 2: Create a layout Create a new layout for our application. Create a file, layout.php at location fuel/app/views/layout.php. The code is as follows, fuel/app/views/layout.php
Here, we are using bootstrap template. FuelPHP has first class support for bootstrap templates. We have created two variables, title and content. title is used to specify the current page's title and content is used to specify the current page details.
Step 3: Create a Controller Create a new controller, Controller_Book to show, add, edit, and delete the book. Create a new file, fuel/app/classes/controller/book.php and place the following code. fuel/app/classes/controller/book.php
class Controller_Book extends Controller_Template
135
FuelPHP
{ public $template = 'layout'; public function action_index() { // Create the view object $view = View::forge('book/index');
// set the template variables $this->template->title = "Book index page"; $this->template->content = $view; } }
Here, we have created the book controller by inheriting template controller and set the default template as fuel/app/views/layout.php.
Step 4: Create the index view Create a folder, book in views directory under fuel/app/views folder. Then, create a file index.php inside the book folder and add the following code, fuel/app/views/index.php
index page
As of now, we have created a basic book controller.
Step 5: Modify the default route Update the default route to set the home page of the application to book controller. Open the default routing configuration file, fuel/app/config/routes.php and change it as follows. fuel/app/config/routes.php
'book/index', // The default route '_404_' => 'welcome/404', // The main 404 route
'hello(/:name)?' => array('welcome/hello', 'name' => 'hello'), );
136
FuelPHP
Now, requesting the URL, http://localhost:8080/ will return the index page of the book controller as follows,
Step 6: Create database Create a new database in MySQL server, using the following command,
create database tutorialspoint_bookdb
Then, create a table inside the database using the following command,
CREATE TABLE book( id INT PRIMARY KEY AUTO_INCREMENT, title VARCHAR(80) NOT NULL, author VARCHAR(80) NOT NULL, price DECIMAL(10, 2) NOT NULL );
Insert some sample record into the table using the following SQL statement.
INSERT INTO book(title, author, price) VALUES( 'The C Programming Language', 'Dennie Ritchie', 25.00 ),( 'The C++ Programming Language', 'Bjarne Stroustrup', 80.00
137
FuelPHP
),( 'C Primer Plus (5th Edition)', 'Stephen Prata', 45.00 ),('Modern PHP', 'Josh Lockhart', 10.00),( 'Learning PHP, MySQL & JavaScript, 4th Edition', 'Robin Nixon', 30.00 )
Step 7: Configure database Configure the database using database configuration file, db.php located at fuel/app/config. fuel/app/config/db.php
return array( 'development' => array( 'type' => 'mysqli', 'connection' => array( 'hostname' => 'localhost', 'port' => '3306', 'database' => 'tutorialspoint_bookdb', 'username' => 'root', 'password' => 'password', 'persistent' => false, 'compress' => false, ), 'identifier' => '`', 'table_prefix' => '', 'charset' => 'utf8', 'enable_cache' => true, 'profiling' => false, 'readonly' => false, ),
138
FuelPHP
'production' => array( 'type' => 'mysqli', 'connection' => array( 'hostname' => 'localhost', 'port' => '3306', 'database' => 'tutorialspoint_bookdb', 'username' => 'root', 'password' => 'password', 'persistent' => false, 'compress' => false, ), 'identifier' => '`', 'table_prefix' => '', 'charset' => 'utf8', 'enable_cache' => true, 'profiling' => false, 'readonly' => false, ), );
Step 8: Include Orm package Update the main configuration file to include ORM package. It is located at “fuel/app/config/”. fuel/app/config/config.php
'always_load' => array( 'packages' => array( 'orm' ), ),
139
FuelPHP
Step 9: Create a model Create a book model in book.php located at “fuel/app/classes/model”. It is defined as follows: fuel/app/classes/model/book.php
class Model_Book extends Orm\Model { protected static $_connection = 'production'; protected static $_table_name = 'book'; protected static $_primary_key = array('id'); protected static $_properties = array( 'id', 'title' => array( 'data_type' => 'varchar', 'label' => 'Book title', 'validation' => array( 'required', 'min_length' => array(3), 'max_length' => array(80) ), 'form' => array( 'type' => 'text' ), ), 'author' => array( 'data_type' => 'varchar', 'label' => 'Book author', 'validation' => array( 'required', ), 'form' => array( 'type' => 'text' ), ), 'price' => array(
140
FuelPHP
'data_type' => 'decimal', 'label' => 'Book price', 'validation' => array( 'required', ), 'form' => array( 'type' => 'text' ), ), );
protected static $_observers = array('Orm\\Observer_Validation' => array( 'events' => array('before_save') )); }
Here, we have specified the database details as properties of the model. It has validation details as well.
Step 10: Display books Update the index action in book controller to list the available books in the database. fuel/app/classes/controller/book.php
class Controller_Book extends Controller_Template { public $template = 'layout'; public function action_index() { // Create the view object $view = View::forge('book/index');
// fetch the book from database and set it to the view $books = Model_Book::find('all'); $view->set('books', $books);
// set the template variables
141
FuelPHP
$this->template->title = "Book index page"; $this->template->content = $view; } }
Here, we have used the orm to fetch the book details from the database and then passed the book details to views.
Step 11: Update index view Update the view file index.php located at “fuel/app/views/book”. The complete updated code is as follows, fuel/app/views/book/index.php
# | Title | Author | Price | |
---|---|---|---|---|
Edit Delete |
Now, requesting the URL, http://localhost:8080/ will show the page as follows:
Step 12: Create action to add book Create the functionality to add a new book into the bookstore. Create a new action, action_add in the book controller as follows,
public function action_add() { // create a new fieldset and add book model $fieldset = Fieldset::forge('book')->add_model('Model_Book');
// get form from fieldset $form = $fieldset->form();
// add submit button to the form $form->add('Submit', '', array('type' => 'submit', 'value' => 'Submit'));
143
FuelPHP
// build the form and set the current page as action $formHtml = $fieldset->build(Uri::create('book/add'));
$view = View::forge('book/add'); $view->set('form', $formHtml, false);
if (Input::param() != array()) { try { $book = Model_Book::forge(); $book->title = Input::param('title'); $book->author = Input::param('author'); $book->price = Input::param('price'); $book->save();
Response::redirect('book'); } catch (Orm\ValidationFailed $e) { $view->set('errors', $e->getMessage(), false); } }
$this->template->title = "Book add page"; $this->template->content = $view; }
Here the following two processes are being performed,
Building the book form to add book using Fieldset methods and Book model.
Processing the book form, when the user enters the book information and submitted back the form. It can be found by checking the Input::param() method for any submitted data. Processing the form involves the following steps –
o Gather the book information.
o Validate the book information. We have already set the validation to be called before save method. If the validation fails, it will throw Orm\ValidationFailed exception.
144
FuelPHP
o Store the book information into the database.
o Redirect the user to index page on success. Otherwise, show the form again.
We are doing both, showing the form as well as processing the form in the same action. When the user calls the action for the first time, it will show the form. When the user enters the book information and submits the data, then it will process the form.
Step 13: Create the view for add book action Create the view for add book action. Create a new file, fuel/app/views/book/add.php and enter the following code,
Book form
if(isset($errors)) { echo $errors; } echo $form;
?>
Here, we are just showing the form created in the action method. In addition, we are showing the errors, if any.
146
FuelPHP
Step 14: Checking the add book action Requesting the url, http://localhost:8080/book/add or clicking the Add book navigation link, will show the form as follows,
Form
Form with data
147
FuelPHP
After entering the book information and submitting the page, the book information will be stored into the database and the page gets redirected to index page as follows.
Book list with newly added book
Step 15: Creating action to edit book Create the functionality to edit and update the existing book information. Create a new action, action_edit in the book controller as follows.
public function action_edit($id = false) { if(!($book = Model_Book::find($id))) { throw new HttpNotFoundException(); }
// create a new fieldset and add book model $fieldset = Fieldset::forge('book')->add_model('Model_Book'); $fieldset->populate($book);
// get form from fieldset $form = $fieldset->form();
// add submit button to the form
148
FuelPHP
$form->add('Submit', '', array('type' => 'submit', 'value' => 'Submit'));
// build the form and set the current page as action $formHtml = $fieldset->build(Uri::create('book/edit/' . $id));
$view = View::forge('book/add'); $view->set('form', $formHtml, false);
if (Input::param() != array()) { try { $book->title = Input::param('title'); $book->author = Input::param('author'); $book->price = Input::param('price'); $book->save(); Response::redirect('book'); } catch (Orm\ValidationFailed $e) { $view->set('errors', $e->getMessage(), false); } }
$this->template->title = "Book edit page"; $this->template->content = $view; }
It is similar to add action, except it searches the requested book by id before processing the page. If any book information is found in the database, it will proceed and show the book information in the form. Otherwise, it will throw file not found exception and exit.
Step 16: Create the view for edit action Create the view for edit book action. Here, we are using the same view used for add action.
Step 17: Checking the edit book action. Click the edit link of any book in the book listing page, it will show the corresponding book form as follows:
149
FuelPHP
Form with book details
Step 18: Create action to delete book Create the functionality to delete book from the bookstore. Create a new action, action_delete in the book controller as follows,
public function action_delete($id = null) { if ( ! ($book = Model_Book::find($id))) { throw new HttpNotFoundException(); } else { $book->delete(); } Response::redirect('book'); }
Here, we are checking for the existence of book in the database using the supplied book id. If the book is found, then it is deleted and redirected to index page. Otherwise, a page not found information will be shown.
150
FuelPHP
Step 19: Checking the delete action Check the delete action by clicking the delete link in the book listing page. It will delete the requested book and then again be redirected to the index page.
Finally, all the functionalities to add, edit, delete, and list the book information is created.
FuelPHP is simple, flexible, scalable, and easily configurable compared to other MVC based PHP frameworks. It provides all the features of the modern MVC framework. It can be used as is or can be changed completely to suit our needs. Above all, it is a great choice for web development.
151