DigiMessenger A LECTURA publication Issue 3, September 2020

WORLD’S TOP 10 BIGGEST MINING DUMP TRUCKS

ESSAY AUTONOMOUS CRUSHING CONSTRUCTION MACHINES SCREENING INTERVIEWS RECYCLING CONSTRUCTION AGGREGATE

1MARKET2020/3 DigiMessenger Editorial

Dear Readers, DigiMessenger You are currently reading the 3rd issue of our bilingual e-magazine DigiMessenger, Issue 3, September 2020 this time focused on the construction aggregate sector. See the overview of new A publication of LECTURA GmbH mobile crushers and screeners on page 13. We also conducted exclusive interviews Picture on the cover: Komatsu with market leaders from the demolition & wheeled excavator PW158-11 recycling market that stated their opinions on the current status of the industry and outlined possible future development of this sector.

If you are a fan of giant machines, have a look at the World’s Top 10 biggest mining dump trucks on page 15. Autonomous machines draw a lot of attention and the construction industry provides a good opportunity for their usage. The editor’s essay on page 6 is dedicated LECTURA GmbH to this topic. Moreover, the selection of articles published on LECTURA Press and additional content awaits you on the following Address pages. Verlag + Marketing Service Ritter-von-Schuh-Platz 3 I hope that everyone finds a piece of interesting reading inside this 90459 Nürnberg issue. Enjoy! CEO, sales Patrik Eder Petr Thiel Editor [email protected]

Editor Patrik Eder [email protected]

Design Petra Paliskova [email protected]

Phone +49 (0)911 43 08 99-0

Email [email protected]

Websites www.lectura.de/contact/ www.lectura.press www.lectura-specs.com

Newsletter www.lectura.press/en/newsletter/ quick-subscribe

Social media

2 2020/3 DigiMessenger Content

6 Editor’s essay Autonomous machines

8 Articles

11 Articles Premium

13 Issue Focus Crushing & Recycling equipment

15 Issue Focus Top 10 biggest mining dump trucks

22 Interview Rockster

23 Interview Machine26

25 Interview Simex

27 Interview MB Crusher

29 Interview Steinexpo

31 Talking Together Recycling industry

Advertising Partners

3 2020/3 DigiMessenger Inhalt

34 Deutscher Teil

35 Artikel

38 Artikel Premium

40 Issue Focus Brecher- und Recyclinganlagen

42 Interview Rockster

43 Interview Machine26

45 Interview Simex

47 Interview MB Crusher

49 Interview Steinexpo

51 In the Next Issue

Werbepartner

4 2020/3 DigiMessenger English Part

5 2020/3 DigiMessenger Editor’s essay

Autonomous construction machines: A dream or reality? By Patrik Eder · September 29, 2020

The regular usage of autonomous construction machines is something very promising yet quite far from standard and availability. Although some companies already presented and successfully tested a number of autonomous machines for the use in the construction industry, there are still some remaining

issues and processes that Volvo Concept Wheel Loader ZEUX need to be dealt with in order to see a frequent deployment operators in those regions. Of key categories of machines of autonomous machines course, contractors can bring regarding full autonomy. In order at construction jobsites operators from other regions, but to provide as much productivity throughout the world. the travelling costs are significant as possible, the autonomous and, therefore, autonomous machines need to be able to As you probably noticed, machines can be used as a communicate and work with the construction industry is, part of the solution, especially each other and all the people similarly to the automotive for repetitive jobs at remote at the jobsite. The machine to sector, trying to take a leap locations with labour shortage. machine communication can from automation to autonomy. be demonstrated, for example, According to statistics, there Some people may be afraid as two compactors and a dozer, are currently more than 100,000 that autonomous machines telling each other where to move construction machines equipped will eliminate jobs. This opinion next on the jobsite and what with some kind of a machine may be partially true, however, processes to do. An interesting control system. These systems the engineers of autonomous option seems to be the usage are continuously monitoring machines stated that the main of drones that could fly over the the machine’s status and purpose of “off-highway robots” jobsite and help with tracing and collecting important data about is to assist people with repetitive choosing the right path for the productivity, maintenance, or jobs (especially in remote areas) machinery. location. This is basically a pre- in order to maintain the optimal step to full autonomy. workflow and reliability. On the The second example can be an other hand, more sophisticated autonomous mining haul truck Skilled labour shortage and value-added jobs should be and a large crawler excavator still done by skilled operators working together in a mine It is not a big secret that who are, after all, faster and more or quarry. The excavator will many contractors around the precise than machines. measure, how much material world lack skilled operators. can it place into the haul truck in The situation is even worse One machine is not enough as less scoops as possible, and in developing countries with the haul truck will know exactly increased demand for work. It is The experts agree that where to unload the material pretty hard or sometimes even compactors, dozers, and and which path to choose impossible to find enough skilled excavators should be the considering all safety measures.

6 2020/3 DigiMessenger Editor’s essay

Komatsu leads the way

The Japanese company Komatsu is the real pioneer in the development of autonomous systems. In 2008, Komatsu launched its first Autonomous Haulage System (AHS), installed within its electric drive haul trucks. The AHS haul trucks are equipped with precise navigation satellite positioning systems paired with advanced sensors. Integrated controllers enable remote control of the machine from a distance and therefore a single operator is able to handle multiple machines or even the entire fleet. Komatsu Innovative Autonomous Haulage Vehicle by Komatsu (Photo: AltitudeArts.com) states that there are currently The second benefit comes from there are still some issues that more than 150 AHS trucks in preventive healthcare as machine prevent the autonomous machines operation in 9 mine sites around operators often face chronic health from regular deployment – the world that hauled over 2 billion issues as they are being frequently especially the security. Such tons of material altogether. exposed to vibrations, dust, and machines need to be 100% reliable shock. The usage of autonomous in terms of where to go, when to Cost savings and preventive machines can prevent those stop, what to do and shutdown healthcare problems that mostly occur during when necessary. Moreover, repetitive jobs and activities. manufacturers must also consider As already demonstrated by the risk of being hacked and Komatsu, a huge advantage for Conclusion therefore provide appropriate in- the contractor using a fleet of built security measures. I believe autonomous machines is the Today, fully autonomous that once the engineers solve the fact that one operator is able construction machines draw a mentioned security and technical to control simultaneously more lot of attention. Contractors and issues, we can expect a more machines, which are able to work construction companies see a lot frequent deployment of fully 24/7. This leads to major cost of potential in their usage including autonomous machines at jobsites savings compared to having each solutions to skilled labour shortage all around the world. machine run by an operator/driver. and repetitive jobs. Nevertheless, Essay Sources

1. Moore, Paul. Komatsu haul truck autonomy goes cabless

2. Komatsu America. AUTONOMOUS HAULAGE SYSTEM

3. Volvo CE. Volvo CE and LEGO® Technic introduce ZEUX

4. Welles, Holly. The Future of Autonomous Construction Equipment Autonomous excavator concept art by GilesMolloy

7 2020/3 DigiMessenger New COVID survey by LECTURA, ERA and CECE is online!

September 21, 2020 – Nuremberg, Germany

Te coronairus it te ea maciner inustr ar an ast. an companies a to aapt to te callenging situation an regulations set b local autorities ic le to signiicant restrictions. Tis is te reason e aske our ebsite isitors about teir opinion on te outcomes o te crisis in connection it teir business.

LECTURA conucte a comple sure in cooperation it te European Rental Associ ation ERA an Committee or European Euipment CECE ocuse on te atermat o te panemic situation in te construction sector. Te sure targete European macine oners, contractors, ealers, an rental companies.

e ran te sure in 6 languages Englis, erman, renc, Spanis, Italian, Polis on our ebsite LECTURA Specs ic is te ultimate buers guie it a montl isit rate o 600,000 proessionals.

Eamine te ull report no

7 2020/3 DigiMessenger Articles

Upper Austrian Expert for Trakpactor 230 Rockster’s Closed Circuit Mineral Processing and Concrete launch Impactor as Nr.1 choice in Technology Expands Team Recycling of Building Materials

SBM Mineral Processing, one of Powerscreen, a world leading R1000S closed circuit impact the few international full-package manufacturer of mobile crushing crusher with a screening system & suppliers of mineral processing and screening equipment is air blower has been crushing at the and concrete mixing plants, delighted to announce the launch Bauhof Deutschlandsberg since demonstrates to be a crisis-proof of the Powerscreen® Trakpactor the beginning of 2020. It provides company and expands its expert 230 and 230SR impact crushers, valuable services in the production team. From June 2020 on, the featuring alive inside technology. of high-quality recycled building international distributor expert materials. Michael Brookshaw will join the The new Trakpactor 230 & 230SR distributor team of the Upper have been designed to offer both Demolish - Recycle - Build! Bauhof Austrian Company. excellent reduction and high Deutschlandsberg GmbH has been consistency of product yield. ensuring the perfect material cycle for 24 years. read more read more read more

360° Handy - MB Crusher lines of The Rockster R1000S increases New Doosan Excavators at EIS rotating grabs called to show off Sedlmaier’s flexibility and Waste Services their skills efficiency

MB Crusher lines of rotating grabs R1000S closed circuit impact EIS Waste Services Ltd, based called to show off their skills crusher with a screening system & in Aberdeen in Scotland, has ‘’When you have a machine but it’s air blower has been crushing at the purchased two new Doosan actually like you’ve got 10, you’ve Bauhof Deutschlandsberg since DX180LC-5 18 tonne crawler nailed it.’’ the beginning of 2020. It provides excavators from Balgownie, the valuable services in the production local Authorised Doosan dealer, ‘’It’s a bit like having a drill, you of high-quality recycled building with headquarters in Inverurie in can change bits or tips and you materials. Aberdeenshire. With roots dating can do anything.’’ These are the back over 45 years ago, EIS Waste feelings that operators that use Demolish - Recycle - Build! Bauhof Services is an independent waste MB Crusher lines of rotating grabs Deutschlandsberg GmbH has been management provider specialising experience. ensuring the perfect material cycle in bespoke waste collection, for 24 years. recycling and disposal services. read more read more read more

8 2020/3 DigiMessenger Articles

New generation for the Evoquip Enters Perfect for SENNEBOGEN 817 E-Series South America coal storage

Since its successful market EvoQuip is happy to announce BEUMER Group provides launch at IFAT 2018, the 817 E the appointment of their first engineering of stockpiles for series impresses customers with distributor in South America. the coal industry. Hard coal is its compact dimensions and Dynsai SA have been appointed temporarily stored in stockpiles fast working cycles in recycling as the official distributor for and then continuously fed to applications worldwide. From Argentina. Dynsai will represent be processed, as needed. The now on, the recycling specialist the full EvoQuip portfolio of design of the depositories must 817 E series stands out with a compact crushing and screening ensure constant filling and reliable new engine that complies with the equipment, genuine spare parts emptying. The required capacity is current exhaust emission standard and machine maintenance determined based on the incoming Stage V and at the same time Dynsai SA began in 2002, a sister and outgoing conveying flow. gains in dynamics in working and company of Repas SA. driving movements. read more read more read more

Metso Outotec to supply primary Terex Ecotec Introduce the TFC Mini-excavator EZ17e: emission- crushing stations for a mining 75 Organics High Level Feeder free, quiet, powerful company in Russia

Metso Outotec will deliver two Terex Ecotec are delighted to With the fully electric mini- primary crushing stations for a announce the expansion of their excavator EZ17e, the Emission- mine located in the Russian Far conveying range with the addition Free Construction Site is becoming East. The EUR 23 million order, of the TFC 75 Organics. A variant a reality. which has been booked in former of the TFC 75 high level feeder, it Metso Minerals’ Q2 2020 orders has been engineered specifically Wacker Neuson is expanding its received, will be delivered by Metso for the stockpiling and aerating zero emission range to include Outotec Corporation (formed when of lower density, bulky materials the electric mini-excavator EZ17e. Metso Corporation and Outotec such as soil, mulch, biomass and With solutions by Wacker Neuson, Oyj completed the combination compost. Located at the hopper an entire inner- city construction of Metso’s Minerals business and outlet, the auger provides aeration site can be operated fully Outotec on June 30, 2020). and an untangling solution for emission-free and almost free of organic materials. noise. read more read more read more

9 2020/3 DigiMessenger Articles

First Sandvik QI442 HS in China Bison 160 Hybrid Impresses On Doosan Adds New DX230WMH-5 provides multifunctional solution Demo to Material Handler Range

Guangdong based Long Ying The new Bison 160 Hybrid hook- Doosan has expanded the Construction Engineering Ltd lift jaw crusher represents a new company’s Material Handler has become the first customer milestone for EvoQuip. It is an range with the launch of the new in China to purchase Sandvik ideal crusher for waste contractors 23 tonne DX230WMH-5 model, Mobile Crushers and Screens’ who can utilize existing hook-lift which joins the recently introduced revolutionary QI442 HS. This vehicles to either bring material DX250WMH-5 25 tonne machine. advanced HSI (Horizontal Shaft to depot for processing or Both models are aimed at material Impact) crusher is able to provide alternatively bring the crusher handling duties in the solid waste, highly accurate material reduction to the waste on site – turning recycling, demolition and forestry at high rates of throughput waste into profit whilst providing industries. The DX230WMH-5 Additionally, it is also able to excellent productivity and fuel has two arm cylinders for extra produce up to three products efficiency. balance and more stability where and when required. read more read more read more

Holzer Tiefbau take delivery of Easier access for difficult, high New Doosan DX235DM new Hyundai HX220AL altitude construction sites Demolition Excavator on Milan Project

Holzer Erdbau- und Baggerbetrieb How the forestry industry is A new Doosan DX235DM from Oberhausen near Weilheim is growing with MB Crusher’s demolition excavator has proved a family owned and run company products to be the ideal machine for the operating in the south of Bavaria, company, Seli Manutenzioni in the earthworks sector. Accessing mountain roads in the Generali Srl of Monza, for middle of a forest is sometimes demolition work at the historic The company’s business activities impractical, and without public Catholic University del Sacro are focused on earthworks, civil trails, it’s practically impossible. Cuore in the centre of Milan in the engineering and demolition work. Lombardy region of Italy. Using Quality, customer-orientation and And even if often the sole way is to the DX235DM, Seli has carried sustainability plays an important reach the peak is by foot, it can be out demolition work on a building role in the running of the business. weary but so rewarding! at the university as part of a redevelopment project. read more read more read more

10 2020/3 DigiMessenger Articles Premium

Unique circular economy: the QH332 cone crusher in combination with the QA335 double screen plant from Sandvik Mobiles!

This unique recirculation solution In this circuit configuration, consists of the combination of the QA335 functions as a pre- the Sandvik mobile cone crusher screening and as well as a QH332 with the Sandvik double secondary screening unit: the fines screen unit QA335. The QH332, are screened directly at the feed, together with the proven Sandvik the coarse material goes into the CH430 cone crusher, is considered cone crusher and from there, via a very versatile and robust the discharge conveyor of the crusher that offers a number crusher, is crushed and returned to of advantages, especially in the the screening unit, which further production of gravel. The mobile classifies the crushed material. double screen QA335 has two independently adjustable screen The ideal and cost-efficient boxes. This patented and unique solution for the extraction of system ensures that the desired natural stone, also with regard to end product is always achieved, the flexible use in quarries. Sandvik QH332 cone crusher and QA335 double even with “difficult” materials. https://www.trump-technik.de/ screen plant

Working faster with QuickChange™ from Rototilt

At the beginning of 2020 also no need to worry about Rototilt launched QuickChange™ falling or swinging attachments. Generation II, a new generation QuickChange™ Generation II has of fully hydraulic quick change been awarded with the German systems for swing rotators, Innovation Award 2020. This excavators and attachments. Award recognises solutions that Robust hydraulic couplings and add value for the user and provide a new front seal that minimises long-term effects. “The award the risk of leaks are examples of shows that Rototilt has achieved improvements over the previous a new technological leap forward generation. The fact that the in fully hydraulic quick couplers”, excavator operator does not says Per Väppling, Marketing and have to leave the cab to change Sales Manager at Rototilt Group hydraulic attachments increases AB. QuickChange™ allows excavator operators to change hydraulic attachments without leaving efficiency and safety. There is www.rototilt.com the cab.

11 2020/3 DigiMessenger Articles Premium

Komatsu Europe Introduces new PW158-11 Wheeled Excavator

Tipping the scales at an and manufacturing know-how to impressive 16 tonnes, the all new deliver a product built exclusively PW158-11 short-tail excavator for European customers. offers all of the unrivalled versatility and innovation of “With the all-new PW158-11 the Komatsu PW-11 range - Komatsu adds a strong but extraordinary comfort, intelligent compact lifter in the 16t wheeled safety features, exceptional excavator range” says Michael ergonomics, superb productivity, Wadsack, Product Manager at factory-installed Quick Couplers, Komatsu Europe. “Based on and the highest levels of standard customer feedback we developed specifications ever seen in an this machine for narrow, urban excavator. It also delivers great jobsites offering compact lifting capacity in an astonishingly dimensions with the lifting compact package. performance which are usually offered only by one class bigger Designed and developed in Europe, machines”. the PW158-11 taps into 100 https://www.komatsu.eu/en Compact dimension and small turning radius: New PW158-11 is the ideal machine for heavy years of Komatsu development work at narrow jobsites.

12 2020/3 DigiMessenger Issue Focus Crushing & Recycling equipment

About Mobile Crushers & Screeners

Mobile crushers or mobile crushing plants are tracked units designed for processing rocks, minerals and other aggregates at construction sites, mines, and quarries. They are also widely used in recycling applications and provide sufficient mobility thus reducing operating costs which McCloskey S250 Screener is a huge advantage compared to to perform an aggregate pre- a number of screens or meshes stationary crushing plants. There screening before crushing. and the raw materials fall through are several types of crushers Mobile screeners or scalpers like a sieve. Subsequently, the that differ based on the crushing are used for material separation, screened aggregates fall onto technology/inlet they use: impact dividing the aggregates into conveyors that stockpile the final crushers, jaw crushers and cone different sized products. The products. The processed minerals crushers. Mobile crushers can be screeners are equipped with a can be reused in construction equipped with a screening system vibrating screen box that contains applications.

Selection of New Mobile Crushers and Screeners Introduced in 2019-2020

Kleemann MS 703i EVO

Machine type Weight Hopper volume Production output

3-deck screener 33 t 8 m3 345 t/hr

Kleemann MS 953i EVO

Machine type Weight Hopper volume Production output

3-deck screener 36.3 t 8 m3 500 t/hr

Kleemann MC 120 Zi PRO

Machine type Weight Hopper volume Production output

Jaw crusher 72 t 13 m3 650 t/hr

Metso Lokotrack ST4.10

Machine type Weight Hopper volume Production output PHOTO 3-deck screener 33.5 t 8 m3 -

13 2020/3 DigiMessenger Issue Focus Crushing & Recycling equipment

Metso Nordtrack S3.9

Machine type Weight Hopper volume Production output PHOTO 2-deck screener 36.4 t 10 m3 -

Terex-Finlay IC-110RS

Machine type Weight Hopper volume Production output PHOTO Impact crusher 35.6 t 3.3 m3 -

Terex-Finlay 696 3-deck

Machine type Weight Hopper volume Production output PHOTO 3-deck screener 40.05 t 8 m3 -

McCloskey C2R

Machine type Weight Hopper volume Production output

Cone crusher 52 t 5 m3 -

McCloskey S250

Machine type Weight Hopper volume Production output

3-deck screener 40 t 10 m3 -

Powerscreen Trakpactor 230SR

Machine type Weight Hopper volume Production output

Impact crusher 29.3 t 2.6 m3 250 t/hr

Sandvik QE442

Machine type Weight Hopper volume Production output PHOTO 3-deck screener 37.07 t 8.5 m3 900 t/hr

Find the rest of 2019-2020 crushers & screeners on LECTURA Specs

14 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

World’s Top 10 biggest mining dump trucks By Patrik Eder · July 20, 2020

The biggest rigid dump trucks and they often work in pairs with or haul trucks are off-highway the biggest mining excavators 1. BelAZ 75710 vehicles that are primarily used which can fill whole giant dump 250 m (820 ft) for the transportation of mined trucks in just a few scoops. The materials and at heavy-duty largest mining dump trucks are so construction sites, quarries and huge that they cannot be driven 2. Caterpillar 798 AC mines. The dump trucks are on public roads. Instead, they are 372 t (410 US t) constantly being manufactured being disassembled into pieces bigger in size as there is a demand and shipped to the customer and for larger payload capacities. Due later assembled straight on site. 3. to the fact that haul trucks are so Nevertheless, these are not the 364 t (401 US t) large and able to transport a huge cheapest machines. One mining amount of material, the customers can cost around $5 often prioritise to use only one million (€4,3 million). Check the 4. Liebherr T 284 large dump truck rather than a following article and find out the 363 t (400 US t) whole fleet of smaller trucks which Top 10 biggest mining dump is more economical. The largest trucks in the world according to mining trucks are able to transport their payload capacity! 5. Komatsu 980E-5 hundreds of tons in just one go 363 t (400 US t)

6. Komatsu 980E-4 363 t (400 US t)

7. Terex MT6300AC 363 t (400 US t)

8. BelAZ 75604 360 t (397 US t)

9. Caterpillar 795F AC 338 t (372 US t)

10. Caterpillar 796 AC / Komatsu 960E-2K 327 t (360 US t)

15 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

10. Caterpillar 796 AC

The last place in our Top 10 erpillar 796 AC dump truck was biggest ranking is shared by two further given a CAT C175-16 diesel models, Caterpillar 796 AC and engine that meets US EPA Tier 4 Komatsu 960E-2K, both offering emissions standards. The engine a nominal payload of 327 tonnes. provides a gross power of 2610 The CAT 796 AC was introduced kW (3500 HP). The 796 AC was in 2018 and, as the model name tested in Western Australia and is suggests, is equipped with an AC expected to be deployed in Canada electric drive system. The Cat- and the US.

Nominal Payload 327 t Gross Power 2610 kW (3500 HP) Travel speed 64 km/h4.000 t See the Caterpillar in action Nominal GVW 576 t Heaped Body Capacity 214 m3 Get all specs for Caterpillar

10. Komatsu 960E-2K

Komatsu 960E-2K, launched in version of the 960E-2 mining truck, 2011, offers the same payload however, the 960E-2K features the capacity as its Caterpillar com- Komatsu Drive with Siemens liquid petitor. The Komatsu dump truck cooled insulated Gate Bipolar also uses an electric drive and Transistor and improved torque is equipped with Komatsu SS- capacity. Few units of the 960E- DA18V170 engine offering the ex- 2K are operating in the US and act same power of 2610 kW as its Australia. rival. The 960E-2K is an upgraded

Nominal Payload 327 t Gross Power 2610 kW (3500 HP) Travel speed 64 km/h Nominal GVW 576 t See the Komatsu in action Heaped Body Capacity 234 m3 Get all specs for Komatsu

16 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

9. Caterpillar 795F AC

The 9th biggest quarry dump truck engine is capable of producing a in our ranking, the 795F AC, is gross power of 2535 kW (3400 also manufactured by Caterpillar. HP) and travel speed of 64 km/h. The machine was introduced in Nevertheless, Caterpillar decided 2009 as the first industry’s sin- that the 795F AC will not be Tier gle-sourced electric drive truck. 4 Final compliant but only Tier 2 The current version of 795F AC ready. The usage of this mining offers a nominal payload of 338 truck is therefore limited to those tonnes and a heaped body ca- locations that do not require newer pacity of 252 m3. The 16-cylinder emissions standards.

Nominal Payload 338 t Gross Power 2535 kW (3400 HP) Travel speed 64 km/h Nominal GVW 576 t See the Caterpillar in action Heaped Body Capacity 252 m3 Get all specs for Caterpillar

8. BelAZ 75604

One of the models from the dump truck range with a body Belaz-7560 range, BelAZ 75604, capacity of 218m3 and nominal is the 8th largest dump truck in the payload of 360 tonnes. The 75604 world according to our ranking. is equipped with a 2800 kW engine There are currently four models and special design that allows it to in the 7560 range (75602, 75603, work in harsh climatic conditions 75604 and 75605) that offer the ranging from -50 to +50 degree exact same payload of 360 t, Celsius. This allows the 7560 however, they differ in engine and mining dump trucks to be used for drive configuration. The Belaru- example in frosty Siberia. sian manufacturer fitted this giant

Nominal Payload 360 t Gross Power 2800 kW (3750 HP) Travel speed 64 km/h Nominal GVW 621 t Heaped Body Capacity 218 m3 See the BelAZ in action

17 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

7. Komatsu 980E-4

All mining dump trucks ranked 18-cylinder Komatsu SSDA18V170 at positions 4. - 7. offer the exact rated at 2610 kW same payload of 363 tonnes. We (3500 hp). Komatsu is well-known will start with the Komatsu 980E- for its Autonomous Haul System 4 introduced in 2016 in North (AHS) and its currently largest America. The capacity of 363 mining dump truck, the 980E-4AT, tonnes (400 short tons) matches is a modification of the 980E-4 the buckets of largest crawler hauler, offering the same payload excavators such as Komatsu capacity. Komatsu 980E-4 can be PC8000-6 that can load the 980E-4 seen at some of the biggest mines in just three to five passes. The in Canada, the United States and dump truck is equipped with an Australia. Nominal Payload 363 t Gross Power 2610 kW (3500 HP) Travel speed 61 km/h Nominal GVW 625 t Heaped Body Capacity 250 m3 See the Komatsu in action

6. Komatsu 980E-5

The Komatsu 980E-5 is also the KOMTRAX Plus 2. The haul truck 4th - 7th largest earth moving dump is powered by an 18-cylinder truck in the world with a nominal Komatsu SSDA18V170 engine payload capacity of 363 tonnes providing 2610 kW (3500 HP) of (400 mt). The 980E-5, introduced power and the machine is capable in 2019, is the successor and of driving 64 km/h. Similarly to his a new generation of Komatsu older brother, the 980E-5 is used 980E-4. The newer model features in mines in North America and enhanced cab design, improved Australia. drive system or upgraded satellite- based communication system

Nominal Payload 363 t Gross Power 2610 kW (3500 HP) Travel speed 64 km/h Nominal GVW 628 t Heaped Body Capacity 250 m3 See the Komatsu in action

18 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

5. Terex MT6300AC

Terex MT6300AC is one the largest from Bucyrus, renamed the series mining dump trucks in the world. and the MT6300AC became The truck giant was introduced Unit Rig MT6300. The machine’s in 2008 by Terex as its biggest maximum travel speed is 64 mining dump truck. As you may km/h and nominal gross vehicle know, Terex’s mining division was weight is 603 t. The dump truck sold in 2011 to Bucyrus, including is equipped with an engine rated dump trucks. Subsequently, at 2796 kW and heaped body Caterpillar acquired this division capacity of 230 m3.

Nominal Payload 363 t Gross Power 2796 kW (3750 HP) Travel speed 64 km/h Nominal GVW 603 t Heaped Body Capacity 230 m3 See the Terex in action

4. Liebherr T 284

Introduced in 2012 as the largest is 600 tonnes and maximum travel mining dump truck in the world, speed is 64 km/h. The model has the fourth mining dump truck in no standard body capacity as the 363-tonne range is Liebherr all bodies are customized. The T 284, which is the successor of Liebherr T 284 haul truck can be popular truck T 282 C. However, fully loaded in just five passes this machine is equipped with when paired with Liebherr R 9800, the most powerful engine in the the largest hydraulic excavator class, MTU 20V4000 C22 rated at from Liebherr. The T 284 was used, 3000 kW (4023 HP). The nominal for example, in mines in Central gross vehicle weight of the T 284 and South America.

Nominal Payload 363 t Gross Power 3000 kW (4023 HP) Travel speed 64 km/h Nominal GVW 600 t Heaped Body Capacity custom See the Liebherr in action

19 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

3. Caterpillar 797F

The third biggest mining dump markets. A perfect on-site pairing truck in the world is the Caterpillar is represented by the CAT 6090 FS 797F that beats the 363-tonne hydraulic shovel, that is capable range of haulers by exactly of filling the 797F in just 5 passes. one tonne. The CAT 797F was According to Caterpillar, the 797F introduced in 2008 and has been is the best-selling dump truck in produced since 2009. Caterpillar’s its class. Do you wonder what giant truck is powered by a the price tag of this giant hauler 20-cylinder CAT C175-20 engine is? Well, that depends on the rated at 4000 HP (2983 kW). equipment and configuration but The motor meets Stage IV Final the price generally ranges from emission regulations and EU $3.5 million to $5 million. Stage V is available for applicable

Nominal Payload 364 t Gross Power 2983 kW (4000 HP) Travel speed 68 km/h Nominal GVW 624 t See the Caterpillar in action Heaped Body Capacity 252 m3 Get all specs for Caterpillar

2. Caterpillar 798 AC

The second place of the Top HP) and the machine is capable 10 largest dump trucks goes to of travelling 64 km/h. The heaped Caterpillar 798 AC with a nominal body capacity of 266 m3 and payload of 372 tonnes. The ultra- 59/80R63 tyres ensure that the class truck was introduced in 798 AC hauls in average a larger 2018 as the Caterpillar’s biggest amount of ore than most of its dump truck. The electrically- competitors. The colossus is driven machine is powered by a currently being used in Australian 16-cylinder CAT C175-16 engine and Canadian oil sand mines. providing power of 2610 kW (3500

Nominal Payload 372 t Gross Power 2610 kW (3500 HP) Travel speed 64 km/h Nominal GVW 624 t See the Caterpillar in action Heaped Body Capacity 266 m3 Get all specs for Caterpillar

20 2020/3 DigiMessenger Issue Focus Top 10 biggest mining dump trucks

1. BelAZ 75710

The winner of our ranking of the Furthermore, imagine that the km/h. This is approximately the Top 10 largest mining dump driver is sitting 7 metres above same power as five Formula 1 trucks is BelAZ 75710 that comes the road. Even though standard cars. Belarus seems to be pretty from Belarus. The behemoth mining trucks use 6 tires, the proud of BelAZ 75710 as the giant has a nominal payload of 450 75710 hauler is equipped with 8 quarry truck was featured on a metric tonnes, which is almost tires that symmetrically distribute Belarusian stamp, highlighting 500 short tons! The Belarusian the weight. the popularity of the largest dump manufacturer introduced the The largest dump truck in the truck in the world. And what about 75710 in 2013 and delivered the world weighs 810 tonnes and the price? Well, if you would like to first machine to a coal mining provides a heaped body capacity own one of the biggest machines area in Kuznetsk Basin, Siberia. of 268 m3. Nevertheless, two ever built, have a pack of $6 million The overall size of this giant is 16-cylinder with a total ready. pretty astonishing: 20.6 m length, gross power of 3430 kW (4600 8.17 m height and 10.6 m width. HP) are able to run the truck 64

Nominal Payload 450 t Gross Power 3430 kW (4600 HP) Travel speed 64 km/h Nominal GVW 810 t Heaped Body Capacity 268 m3 See BelAZ in action

21 2020/3 DigiMessenger Interview Rockster

Rockster presents new crushing technologies and strengthens its position on the US market

Wolfgang Kormann, CEO Rockster separating light fractions like Austria International GmbH, polystyrene, textiles, wood parts, describes the main features plastic, etc. from demolition of the DUPLEX-system, talks materials. about the current situation in the company and outlines his plans Are you going to attend any trade for the near future. fairs in the near future?

The industry has been hit hard Next planned fairs will be in spring by the Coronavirus crisis. How 2021 in Austria and in the USA. have you been affected and what precautions were you forced to Can you describe the DUPLEX- take? system? What makes it so unique? Corona situation has made the whole economic environment The DUPLEX system allows you

more unstable; companies hold to run one base machine with 2 Wolfgang Kormann, CEO Rockster Austria back decisions and are worried different crushing technologies. as well you save investment in 2 about the near future. Therefore, Each technology, impact separate machines. investments in new equipment crushing or jaw crushing, offers slowed down and are hold back. special advantages for certain Can you briefly compare the We adapted our structure by applications. With the DUPLEX recycling sector in Europe and periods of part time working you get a unique system, where in the US? Are there any huge for some staff and adapting you can exchange the crushing differences? production process. chambers within a few hours on one base machine and turn an The basic idea of recycling Have you recently launched any impact crusher to a jaw crusher is the same, most European new models? and vice versa. areas are even more forced to recycling solutions as deposit We modified existing models Therefore, you can cover a much areas and spaces are very with latest emission and low wider range of applications limited. Furthermore, European consumption engines as well with just one base machine and governments enforce recycling as wind sifting solutions for optimise your machine utilisation, quotes by legislation to push this business.

What are your plans for 2021?

From the market side, we will focus and push to grow our US market dealer network, as we belief in this market. Regarding the product range in 2021, we will launch another new model also contributing to another growth of Rockster R1000S track-mounted impact crusher/RSS410 scalping screen our new production line in Austria.

22 2020/3 DigiMessenger Interview Machine26

Machine26: The pandemic could act as a catalyst for digital innovations in the construction business

The company Machine26 offers a digital trading platform for used construction machinery. We had the opportunity to ask Steffen Schweiger, Co-CEO, several questions about their business and the digital transformation of the industry.

Could you briefly introduce your company? What business do you run?

Niklas Fritz, Christian Schweiger and I founded Machine26 in 2019 to make trading of used construction machines efficient and safe. Therefore, we are offering a machine trading Steffen Schweiger, Co-CEO, Sales & Operations platform with automated inspection. machines. In addition, our construction machines—we websites WirKaufenMaschinen.de/ are creating a new and secure With our solution, the sale of a WeBuyHeavyMachines.com help sourcing channel. Core of our machine becomes simple and end customers to easily sell their business model are digital fast. For OEMs and licensed construction machine within a very solutions for testing the machines. dealers, we facilitate the short period of time. remarketing of used construction For our buyers—dealers of used Why Machine26? Is there any symbolism in that number?

Indeed, there is. The number 26 in the name stands for the position of the chemical element iron in the periodic – the main component of every construction machine. As a side effect, we are not just another marketplace with a 24 in its name.

How have you been impacted by COVID-19?

COVID-19 led to a slowdown of the production and sale of new construction machines which, of course, impacted our remarketing business. Due to an increasing Christian Schweiger (CTO), Steffen Schweiger (Co-CEO) and Niklas Fritz (Co-CEO)

23 2020/3 DigiMessenger Interview Machine26

market uncertainty, end customers are more sensitive when it comes to investment decisions.

However, there is a considerable demand for used machines and prices stay at a high level. In be easily reduced by technology. Our ambition is to create the addition, we are glad to experience Therefore, we are offering a digital best solution to trade machines some positive developments. solution that is customer-oriented internationally by setting new From our point of view, the and easy to handle. It includes a standards in inspection and safety. pandemic is a digitalization transparent and reliable report on booster for the construction machinery condition which is very How do you ensure that the sellers industry. In order to counter the important in order to increase the can be trusted? challenges posed by COVID-19, the efficiency and safety in the market. different market players are now For the remarketing business accelerating digital innovation. Machine26’s goal is the digital we collaborate with OEMs and change in the construction licensed dealers on a partnership The pandemic is a new industry. We do not want this to level. The relationships are challenging situation and we happen overnight but step by characterized by high personal are making the best out of it. At step and hand in hand with our trust. We usually know our sellers Machine26, we used the lockdown customers. very well because we do business to shift resources to our product on a regular basis with them. development – so now, we can What types of machines could be provide even better solutions to found on your portal? A very important part of our our customers. business is our inspection solution. Our focus is on construction Our platform is giving detailed Why is digitalisation so machines. Right now, the most information on the condition of important for you? What are the popular machines on our platform each and every machine. This is advantages? are excavators, wheel loaders and a huge advantage for our buyers dumpers. Nevertheless, we offer because they are able to check Our team has been working in the many different types of machines everything in advance – like in the construction industry for years. and might include even more in offline world, but more efficient. It is one of the most relevant future. industries, however, still suffering What are your plans for the near from traditional processes. The Do you focus just on the future? potential of digital solutions is by German construction market or far not used yet. worldwide? In the near future, we want to grow our business and step by step We have seen that trading As a still very young company, convince more customers of our of construction machines is our focus is on the European solution. We want to make trading inefficient and unsafe: capital construction market, especially of construction machines digital costs, time efforts, and transaction on Germany. However, trading and contribute to a more efficient risks are still too high – but can has always been international. and safe market.

24 2020/3 DigiMessenger Interview Simex

Discovering the VSE screening bucket range by Simex

Alessandro Ferrin, Head of Marketing Simex, enlightens the impact of pandemic situation on the company, digital trends in the industry and plans for the following year. Moreover, Uwe Basler, sales area manager for Germany, introduces the screening and crushing range by Simex, including the VSE screening buckets.

The industry has been hit hard by the Coronavirus crisis. How have you been affected and what precautions were you forced to Uwe Basler, sales area manager Germany take? involving the reorganization of thanks to a specific project we the working shifts, controlled decided to launch to redesign Simex is 100% operational in and limited access, medical the way we communicate with all its production departments, support, programmed sanitization, clients and of course the way we starting from May 4th. In distribution of personal protection assist and support the end-users. compliance with the national devices. Now more than ever these digital decrees, we have redesigned opportunities are very important carefully our assembling spaces What is your opinion on digital and must be taken. A truly and the way of working of our product launches and online integrated experience between people, in order to promptly webinars? Would you like to traditional marketing and digital fulfill orders, fully respecting follow this trend in the future? channels is the best way to be the maximum healthcare always in touch with the market, for our workers. Strict safety We started to use massively the partners, dealers and end-users. protocols have been activated, digital channels 3 years ago, What kinds of screening and crushing equipment do you offer?

Screener buckets for excavators that are used as a sieve and separator. Their specialty is that the output size can be hydraulically adjusted from the cab. Moreover, we offer crusher buckets for excavators and loaders. The crushing devices are breakers with teeth and counter teeth. The advantage is that even a softer and more elastic material can be crushed. VSE screening bucket range

25 2020/3 DigiMessenger Interview Simex

Can you describe the main features of Simex VSE screening buckets?

Regarding the VSE screening buckets, the output size can be continuously adjusted hydraulically from the cabin. Thus, a bucked load can be screened out with different output sizes without picking up the material again. The easily exchangeable attachments which are mounted on the shaft are applicable for different types of material such as humus, soil, demolition material, etc. VSE screening bucket range How many models do you offer What are your plans for the dealers and end-user more than in the VSE range and which following year? ever, with care, determination and machines can they be mounted professionality, to give them what to? Our leading thought now is “WORK Simex has always been designed HELPS WORKING”. This means and put into the market: innovative There are 4 models for being an active part in the restart and high performing attachments, excavators from 8 to 50 tons. The of the national and international technical assistance and actual attachments on all models can be productive system, whereas we solutions, concrete and enduring exchanged for different types of will play our role, as we have been in time. materials within a short period of done for decades. As always, we time, whereas there are 4 versions. will stand side by side with our

Eine ausgezeichnete Lösung QuickChange™ Generation II

26 2020/3 DigiMessenger rototilt.de Interview MB Crusher

MB Crusher: Crushing the downsides of the corona crisis

We spoke to a consultant from MB Crusher and gained fresh news from the company about their future steps and plans, the quality of used materials for their buckets and recent interesting projects managed by their product range.

The industry has been hit hard by the Coronavirus crisis. How have you been affected and what precautions were you forced to take? BF90.3 crusher bucket mounted on Liebherr 914 It was a difficult time in some respects, but many construction were implemented: masks, Everyone’s life had to be sites did not stop working and gathering bans, installation of reorganized in order to be able therefore it did not have a major structures to keep the workplaces to live with this new reality. impact on our production. isolated, constant hand and It cannot therefore be ruled However, the sales representatives workplace hygiene with special out that the sales world and worked hard to keep in touch products, body temperature test the trade fair sector will have with customers and find new when coming into the office. to reorganize themselves in prospects. From the interpersonal order to make optimal use of point of view, at the time of the What is your opinion on online the disadvantageous situation. reopening of the offices, the product launches and webinars? However, we hope that the outlook decrees issued by the government Would you like to follow this trend will improve and that normal on the precautionary measures in the future? activities can resume in 2021.

How long does it take in average to equip one of your attachments to an excavator and possibly swap them?

It is a very quick job that takes only a few minutes.

What key materials do you use to improve the wear-resistance of your attachments?

With more than 60 years of earth moving, road construction, demolition, and quarrying experience, we have chosen BF120.4 crusher bucket mounted on Case CX350D crawler excavator

27 2020/3 DigiMessenger Interview MB Crusher

the best materials to build our products. We know how much our machines are prone to wear and tear, so every single part is designed to be as little damaged as possible and for a long service life. The selected materials are of the highest quality, such as the steel that makes up the housing of the jaw crusher bucket. Our products are “Hardox In My Body” certified and guarantee that they have been subjected to strict quality controls and approved by a strict technical commission.

MB Crusher products are designed Hitachi Zaxis ZX38U to work in any situation and in all weather conditions, ensuring high country road had collapsed and a The solution was to install an performance. whole district and its inhabitants MB-S10 screening bucket on top remained isolated. of the excavator already on site to Can you name any interesting screen and clean the material that projects that were recently The site was difficult to reach resulted from the removal of the managed by your company? due to its geographical location. previous barrier and an MB-C50 Therefore, the problem was to jaw crusher bucket to remove the During the lockdown, we received bring the drainage gravel to the crushed stones. The screening an equipment request from a construction site, both for the bucket has also been used to company that had received a timely arrival of the material maintain regular and clean pebbles project to limit a slope. This was itself and due to the nature of the for state-of-the-art drainage. an urgent job because a stretch of location.

Limestone recycling - BF120 crusher bucket and MB-S18 screening bucket used by Kobelco SK 350 and Liebherr 934

28 2020/3 DigiMessenger Interview Steinexpo

steinexpo 2021: European’s largest basalt quarry located in Germany will host the industry for the 11th

The mineral processing Ofleiden in the state of Hesse in technology trade fair and Germany. demo-show steinexpo has been postponed to 2021 due The steinexpo trade fair has been to the corona-crisis. We had an postponed to 2021. What is the opportunity to ask Ms Kathleen current date and how did you Niendorf, editor at Geoplan approach the situation? GmbH and steinexpo-press, for additional information about The 11th International the rescheduled trade fair that Demonstration Fair for the raw will once again take place at the and building materials industry largest basalt quarry in Europe, will take place (formally subject to situated near Homberg/Nieder- Corona) from April 14th to 17th,

Kathleen Niendorf, editor | steinexpo-Press

2021 at the well-known location in the Hessian MHI quarry Nieder- Ofleiden. The hope of having the fair take place as planned remained until well into April 2020. However, the competent Hessian authorities then decided that the 11th steinexpo could not take place at the end of August 2020 as planned. Dr. Friedhelm Rese, managing partner of the trade fair organizer Geoplan GmbH, explains: “With a heavy heart, the steinexpo 2020 has to be postponed due to official requirements. We decided on the new date for the 11th quarry demonstration fair in close contact with the operators of the quarry and the responsible authorities. As a rather smaller trade fair organizer, the shift hits us with some force. Nevertheless, it is now time to look ahead: together we will make the 11th steinexpo from April 14th to 17th next year a successful platform for the raw materials and building materials industry”.

29 2020/3 DigiMessenger Interview Steinexpo

What was the exhibitor’s response to the postponement?

The exhibitors who have already registered show great understanding. Dr. Rese is pleased: “Almost all of them reflected that this decision was the only sensitive solution from the perspective attitude: the raw materials and affected by Corona. But there is of the end of April 2020. All building materials industry is also a time with and after Corona. companies that are involved in the only marginally affected by And trade fairs are indispensable fair naturally hope for repeated the pandemic; “Our” plants are here. Because through the direct success. This occurs much more running. As a result, the need for a contact with each other, an easily in a calm, safe environment personal exchange is high, so that exchange of experiences is better than in a stop-and-go phase”. we are assuming a high number possible than in other ways. Large of visitors and we base all hygiene devices can be experienced live at How many exhibitors and visitors measures on them.” (our) trade fairs and transactions do you expect in 2021? can be concluded on site. You can “touch” things and see for After the announcement about What will be the main highlights yourself in a “live test”. Something the corona-related postponement of the trade fair? like that just does not work online. of the 11th steinexpo, the trade Of course, Corona will change fair organizer gave all exhibitors As every year there will be special the world of trade fairs. But with who had already registered for “highlight-topics” - let yourself be adequate safety and hygiene the trade fair originally planned in surprised. The spring steinexpo precautions, trade fairs will again August 2020 the opportunity to 2021 will be very special in many take place successfully in the confirm their participation in 2021 ways. future. by means of a simple declaration. The response to this has been Do you still positively impressive: Around see a potential 85% of the exhibitors took up this in exhibitions opportunity directly and are now and trade fairs preparing their appearance in considering Nieder-Ofleiden in April 2021. unprecedented The other exhibitors usually situations such said do not stop but leave the as the Corona possibility of their participation crisis? open at the moment—often also due to Corona—still open. With The trade regard to the number of visitors, fair industry this will of course depend heavily is certainly on the Corona situation in April particularly 2021. “Here we have a positive affected and www.fassi.com

30 2020/3 DigiMessenger Talking Together Recycling industry

The crushing and screening sector signals a growth potential

LECTURA Press is talking The safety of our personnel, our together with representatives of customers and other stakeholders the aggregate recycling industry is a top priority for us, and we about launches of new products follow the local health and safety and services, telematics, or recommendations on personal market development. Our protection very carefully and invitation was accepted by Mr have introduced our own safety Marcel Kerkhofs, marketing measures in our local offices, too. manager at Keestrack, Mr Toni In those areas where restrictions Laaksonen, SVP at McCloskey are tight due to the status of the International and Mr Vesa pandemic, face to face meetings Tuloisela, director Nordtrack with customers, including service Offering at Metso Outotec. and integration work, have been Toni Laaksonen, SVP, McCloskey International impacted. The industry has been hit hard daily and they are using protective by the Coronavirus crisis. How masks within the factory area. The Have you recently introduced any have you been affected and what amount of cleaning services has new models or services? precautions were you forced to been increased both at the factory take? and office areas. In addition, most Marcel: Keestrack’s R&D is in the office staff is working remotely the process of testing the new to ensure social distancing. I4 reversible impact crusher to produce high-quality granulate. The I4 will be able to do secondary and tertiary crushing with one machine. The official launch of this machine will be in April 2021.

Marcel Kerkhofs, marketing manager Keestrack Toni: We introduced several new Marcel: Keestrack needed to shut products in Q4/2019 and Q1/2020 down the factories temporarily in including our new tracked C-Series Italy and India due to the Covid cone crushers, new recycling crisis, but we were still able to have products, as well as several a slight turnover growth. Keestrack washing plants. is also still recruiting personnel to strengthen our team. Vesa: Metso Outotec’s crushing and screening offering is very Toni: Our factories continue to wide, and it covers all the major operate with almost full speed and Vesa Tuloisela, Director, Nordtrack Offering at technologies. The latest product Metso Outotec capacity, but we have implemented family is the Metso Nordtrack™ companywide extra HSE measures Vesa: We have introduced new range, introduced a year ago. It is a to secure the health and safety of ways of being in touch with our full range covering different mobile our employees. customers via digital channels and crushers, screens, and conveyors, remote support whether it is about designed for contractors in For instance, the factory workers meetings, webinars, or training and particular. are being temperature-tested so forth.

31 2020/3 DigiMessenger Talking Together Recycling industry

The latest new models in our legacy product family Lokotrack® mobile crushers and screens are the compact size Lokotrack ST2.3 mobile scalping screen, and the Lokotrack ST4.10 mobile screen, the biggest screen in the family.

What telematics solutions do you offer?

Marcel: Keestrack’s mobile crushing and screening plants

feature the advanced GSM/ Keestrack electric-driven crushers and screens UMTS modem/GPS monitoring tool Keestrack-er that guarantees and improved to be both powerful Marcel: Keestrack takes the real-time location information and as well as easy to use. opportunity of using these tools to status reports and offers access It is easy to see whether the unit facilitate their global training and to the plant’s control software performs as it should or if there service purposes. Webinars save for immediate adjustments or would be any reasons to believe time, lower CO2 emissions, and updates. for a possible breakdown, which save money. Keestrack already makes the technical support had some successful trainings on Real-time performance values for the unit fast. Continuous stage V engine technology and (engine/drive speeds, hydraulic monitoring of your fleet also several service topics. pressures, crusher settings, etc.), improves the operator’s safety stored data and the machine’s and can result in increased Toni: The current environment accurate position are transmitted production performance as well is providing us with new and to the central Keestrack server. as in decreased fuel consumption. effective means to communicate The information can be retrieved at An important feature is also the with our customers. We have not any time and from everywhere in maintenance diary which gives previously used webinars or on- the world. the user recommendations and line product launches, but most frequent notifications for needed likely these types of channels will Toni: Currently, we are not maintenance parts and kits. be used in the near future. offering telematics, but we are continuing to look into technology All in all, we have developed Metso McCloskey has already started and digitalization solutions that Metrics with our customers in to use other digital channels, like will benefit our customers and mind; to make the predictive social media, to promote our make them more productive and maintenance easier for them in solutions and products globally. successful in their business. order to avoid breakdowns which These channels will support our are typical in the heavy-duty future product launches and they Vesa: In the Metso mobile range, industry. Any breakdown which are gaining more traction as we we offer the Metso Metrics remote can be avoided means savings in gain more followers. monitoring solution which gives lost time as well as in production the user a webportal access to and this is the number one goal Vesa: We have been running owned fleet of equipment making for us. our Packed with Performance it possible to inspect alarms, aggregates webinar series parameters, GPS-location as well What is your opinion on webinars since May this year. Every week the unit performance data. The and online product launches? Are we introduce new topics to Metso Metrics has been on the you planning to take advantage existing and new customers and market since mid-2010’s and has of these digital solutions in the distributors. Thousands of our since been developed even further future? stakeholders have participated

32 2020/3 DigiMessenger Talking Together Recycling industry

in the webinars and they have become a part of our way of communicating.

Can you predict the development of crushing & screening market in the next few years?

Marcel: Governments will keep pushing to lower emissions of CO2, dust, and noise. This is why McCloskey J40 jaw crusher and S130 screener Keestrack keeps on innovating the electrification of machines. We to take place. Big megatrends range of equipment is targeted expect a growing market share such as digitalization, urbanization especially for contracting jobs of electric driven machines every and circular economy are also where restrictions can be more year. driving development in crushing difficult than usually; for instance, and screening. For example, requirements made for crushing Toni: Our expectation is that the we believe that the demand for and screening jobs near urban market will continue to grow over more environmentally friendly areas. the long run despite the disruption and digitally savvy equipment will caused by COVID. The long-term increase, as well as the demand What would you like to achieve in trend for crushing & screening for recycled aggregates. 2021? demand has been positive as the construction and aggregates A great example of product Marcel: Keestrack envisions a industries have been significantly innovation in this field is the growth of 20%. The launch of growing all over the world. Lokotrack™ Urban mobile crusher the F6 milling machine in South series, which is designed to cut East Asia in 2020 will introduce More and more infrastructure both noise and dust emissions on Keestrack among the road spending, in response to crushing sites, enabling aggregate products. Also, the track mobile disruptors like COVID-19, results production closer to inhabitant reversible impactor I4 will be in more cities, railways, roads, etc. areas. The new Metso Nordtrack™ launched in 2021. being built globally, and continuing range is designed for the C&D the momentum for the crushing & (construction & demolition) waste Toni: The biggest priority for us screening sector. recycling segment in mind. is always the health and safety of our employees but becomes even Vesa: The pandemic makes it We believe it is the perfect set- more so as we navigate through difficult to predict the near future up for customers in this industry a global pandemic. We want to of the market, but we see that our being powerful yet compact in size secure a safe working environment customers are in a good position and therefore easy-to-use and to for all McCloskey personnel. once the recovery measures start move units. The Metso Nordtrack™ From the business point of view, our engineers have been developing an exciting line-up of new products that we will be launching in 2021 to build and support the business development and growth of our dealers globally.

Vesa: We hope that the situation with the pandemic will ease and that the construction business is Metso Nordtrack J90 mobile crusher able to sustain healthy business.

33 2020/3 DigiMessenger DigiMessenger Eine LECTURA Publikation 3. Ausgabe, September 2020

DIE TOP 10 WELTWEIT GRÖSSTE BERGBAU MULDENKIPPER

ESSAY ABBRUCHTECHNIK AUTONOME BAUMASCHINEN SIEBTECHNIK

INTERVIEWS RECYCLING SIEB- UND ABBRUCHTECHNIK AGGREGATE 33 2020/3 DigiMessenger DEUTSCHER TEIL

34 2020/3 DigiMessenger Artikel

Sicherheit und Ergonomie spielen Vielleicht kennen nicht Alle.... Zeigner Mietpark mit kraftvoller bei KLEEMANN eine große Rolle Die 5 genialen Lösungen für Ihre Betonschere erweitert - Rotar Baustelle RCC30

Der Betrieb großer Maschinen Wie die kreativsten Baustellen MB Zeigner Abbruchtechnik im ist oftmals mit einem erhöhten Crusher-Maschinen nutzten, um Rhein-Main-Gebiet steht Gefahrenpotential verbunden. die Arbeit zu erleichtern und das für Beratung, Verkauf von Das gilt auch für Brech- und Geschäft zu steigern Neu- und Gebrauchtgeräten, Siebanlagen, wo große Ersatzteilservice, sowie Gesteinsbrocken unter Anwendung Falls jemand denkt, die Arbeit auf fachkundige Wartung und immenser Kräfte zu kleinen Baustellen sei eintönig, liegt er Reparatur von Maschinen. Körnungen verarbeitet werden. falsch. Jeder Auftrag kann in jeder Der Mietpark der Zeigner Deshalb steht bei KLEEMANN der Phase der Arbeit Schwierigkeiten Abbruchtechnik mit einer Schutz des Menschen an oberster aufzeigen. Und jede Schwierigkeit Vielzahl von Anbaugeräten hat Stelle. muss schnell und ohne zu viele ein kraftvolle Rotar Betonschere Kosten zu verursachen gelöst RCC30 neu im Sortiment. werden. WEITERLESEN WEITERLESEN WEITERLESEN

Aufbereitungs- und Auch im Mietgeschäft eine Die Umwelt, Energie & Recycling Betontechnikspezialist erweitert interessante Lösung! Expo im Coreum Team

SBM Mineral Processing: Seine robuste Konstruktion, Die Umwelt, Energie & Recycling internationale Vertriebspower mit Wartungsfreundlichkeit und Expo im Coreum. Abfälle Michael Brookshaw einfache Bedienung machen die vermeiden, die stoffliche SBM Mineral Processing, einer mobile Umschlagmaschine 818 Verwertung intensivieren und den der wenigen internationalen E-Serie zu einem Allround-Talent effizienten Umgang mit Energie Komplettanbieter von im Recycling. Das familiengeführte und Ressourcen langfristig Aufbereitungs- und Betonanlagen, Unternehmen Stoop Verhuur sicherstellen: Bei der Umwelt, beweist sich als krisenstabiles aus Belgien hat ihn vor Kurzem Energie und Recycling Expo im Unternehmen und erweitert sein als Ergänzung des Mietparks Coreum geht es vom 31.08. bis Team. Mit Michael Brookshaw erworben. 30.09.2020 um neue Technologien, verstärkt das oberösterreichische Maschinen und Erkenntnisse, wie Unternehmen seit Juni 2020... diese Ziele in der Praxis erreicht werden können... WEITERLESEN WEITERLESEN WEITERLESEN

35 2020/3 DigiMessenger Artikel

Das Update 2020 für die Schwerer Beton in dicken Der Rockster R1000S steigert Recycling-Branche Quadern Sedlmaier’s Flexibilität und Effizienz

Seit der erfolgreichen Beim innerstädtischen Abbruch Anfang 2020 entschied sich Markteinführung zur IFAT 2018 von schwer armiertem Beton im die Anton Sedlmaier GmbH überzeugt der 817 E-Serie durch süddeutschen Bad Cannstatt aus Starnberg in Bayern den 30 kompakte Abmessungen und zeigte sich ein KEMROC- Tonnen Prallbrecher R1000S schnelle Arbeitsbewegungen in Schneidrad der Baureihe DMW anzuschaffen. Erster Einsatzort Recyclingeinsätzen bei Kunden von seiner besten Seite. Hier sollte ist ein Großprojekt im Zentrum weltweit. Ab jetzt trumpft der das Unternehmen CK Abbruch & von Tutzing, wo ein 6-stöckiges Recycling-Spezialist 817 E-Serie Erdbau GmbH einen Schutzbunker Firmengebäude des Roche- mit einem neuen Motor der aus dem Zweiten Weltkrieg zur Konzerns dem Erdboden gleich aktuellen Abgasstufe V auf und Hälfte beseitigen. gemacht wurde. gewinnt gleichzeitig an Dynamik bei Arbeits- und Fahrbewegungen hinzu. WEITERLESEN WEITERLESEN WEITERLESEN

Micha mischt den Laden auf MB Crusher bestätigt Optimierte Logistik: seine Teilnahme an der Baustellenprozesse mit mobilen FACHAUSSTELLUNG BAU Haldenbändern flexibler gestalten

Auf dem Umschlaghof der MB Crusher wird in diesem Jahr Moderne Brech- und Achauer Kompostierungs GmbH an der FACHAUSSTELLUNG BAU Siebanlagen regeln heutzutage & Co. KG (AKG) in Heilbronn reißt teilnehmen, die vom 9. bis 12. Materialströme innerhalb der Faden der ankommenden September 2020 in Neumünster - der Anlage weitestgehend LKW und PKW nicht ab. Hier wird Schleswig-Holstein stattfindet. automatisch. Dennoch haben die Hausmüll, Sperrmüll, Biomüll und Maschinenbediener einen großen Grünabfall aus den öffentlichen Es wird eine Gelegenheit sein, Einfluss auf die Endproduktqualität Müllsammlungen, dem Bauhof, endlich unsere Kunden und all und die Tagesleistung. Sie steuern Garten- und Landschaftsbau- diejenigen zu sehen, die wissen mit ihren Baggern und Radladern Betrieben der Region und auch von wollen, wie sie ihre Baustelle den Input – also das Aufgeben von Privatpersonen abgeliefert – und verbessern und rentabler machen Gestein oder Recyclingmaterial. wohl sortiert und damit verwertbar können. Auch beim Output spielen wieder abgeholt. Anwender die Hauptrolle... WEITERLESEN WEITERLESEN WEITERLESEN

36 2020/3 DigiMessenger Artikel

Wasserwirtschaft in den Doppstadt stellt Recycling- Ohne Probleme arbeiten in Rohstoffindustrien: Eine Kompetenz auf der eREC und grossen Höhen Perspektive von CDE Global EXPO COREUM vor

Die Vorstellung, dass wir rund Zwei Messen, zwei Konzepte: Eine Straße in den Bergen mitten um den Globus mit Problemen Egal ob digital oder live vor im Wald zu bauen, wird manchmal konfrontiert sind, die sich aus Ort – Doppstadt hat für jede zu einem fast unmöglichen dem Wassermangel auf einem Herausforderung der aktuellen Unterfangen. Wenn es noch keine Planeten ergeben, dessen Messesaison die passende markierten Wege gibt, ist dies nicht Oberfläche zu über 70 % aus Antwort. Mit einem virtuellen möglich. Oft sind dann die einzigen Wasser besteht ist für die Stand präsentiert sich die Transportmittel ... Ihre eigenen meisten nicht fassbar allzumal Velberter Unternehmensgruppe Füße. Aber wie zufrieden macht das Gesamtwasservolumen – auf der Online-Messe eREC vom es, den Gipfel oder einen anderen erstaunliche 96,5 % – in unseren 31. August bis zum 5. September unzugänglichen Ort zu erreichen? Ozeanen enthalten ist. erstmals komplett digital. Lassen Sie uns nun versuchen, über die Maßnahmen...

WEITERLESEN WEITERLESEN WEITERLESEN

CDE kündigt weltweites Neuer Baggerstar bei Holzer CASE High-Reach virtuelles Symposium für die Tiefbau: Hyundai HX220AL Kombiausrüstung Nassaufbereitungsbranche an

CDE, der branchenweit Tätigkeitsfelder sind Erd-, Die Art, wie Baggerfahrer führende Hersteller von Tiefbau- und Abbrucharbeiten. Sebastian Morsmann seinen Nassaufbereitungsanlagen, hat Dabei legt man besonderen Wert CX350D steuert, hat beinahe angekündigt, ein weltweites auf Qualität, Kundennähe und etwas Spielerisches. Dabei ist virtuelles Branchenevent im Nachhaltigkeit. Firmeninhaber der Abbruch der vierstöckigen Bereich der Nassaufbereitung von Jakob Holzer betont: „Wir haben Wohnanlage, den er gerade Materialien zu veranstalten. seit vielen Jahren einen sehr guten mit dem 45 Tonnen schweren Kontakt zu Fischer u. Schweiger Raupenbagger und seiner neuen Als Fortsetzung seiner GmbH in Zusmarshausen. Als High-Reach Abbruchausrüstung Schulungsreihe „Engineering unser nächster großer Bagger für in Marl angeht, alles andere als Insights“ soll das zweitägige Abbruch und Tiefbau anstand... Spielerei. virtuelle Event vom 14. bis 15. Oktober stattfinden. WEITERLESEN WEITERLESEN WEITERLESEN

37 2020/3 DigiMessenger Artikel Premium

Einzigartige Kreislauf-Wirtschaft: der Kegelbrecher QH332 in Kombination mit der Doublescreensiebanlage QA335 von Sandvik Mobiles!

Diese einzigartige Kreislauf- In dieser Kreislauf-Konfiguration Lösung besteht aus der fungiert die QA335 als Vor- Kombination des mobilen Sandvik wie auch als Nachsiebeinheit: Kegelbrechers QH332 mit der Der Feinkornanteil wird bei Sandvik Doublescreenanlage der Aufgabe direkt abgesiebt, QA335. Der QH332 gilt mit dem das Grobmaterial geht in den bewährten Sandvik-Kegelbrecher Kegelbrecher und kommt von CH430 als eine sehr vielseitige dort über das Austragsband und robuste Anlage, die gerade des Brechers wieder gebrochen in der Splitt-Produktion eine zur Siebanlage zurück, die den Reihe von Vorteilen aufweist. gebrochenen Anteil weiter Die mobile Doublescreenanlage klassiert. QA335 verfügt über zwei unabhängig voneinander Die ideale und kosteneffiziente einstellbare Siebkästen, durch Lösung bei der dieses patentierte und einzigartige Natursteingewinnung, auch System erreicht man auch bei hinsichtlich des flexiblen Einsatzes

„schwierigen“ Materialien immer in Steinbrüchen. Sandvik QH332 Kegelbrecher und QA335 das gewünschte Endprodukt. www.trump-technik.de/home Doublescreenanlage

Schneller Arbeiten mit QuickChange™ von Rototilt

Rototilt hat Anfang 2020 mit die Sorge um herabfallende QuickChange™ Generation II eine oder pendelnde Anbaugeräte. neue Generation vollhydraulischer QuickChange™ Generation II ist mit Schnellwechselsysteme für dem German Innovation Award Schwenkrotatoren, Bagger 2020 ausgezeichnet worden. Der und Anbaugeräte auf den Award ist eine Anerkennung für Markt gebracht. Robuste Lösungen, die für den Benutzer Hydraulikkupplungen sowie einen Mehrwert darstellen und für eine neue Frontdichtung, die langfristige Effekte sorgen. „Die das Risiko von Undichtigkeiten Auszeichnung zeigt, dass Rototilt minimiert, sind Beispiele für einen neuen Technologiesprung Verbesserungen gegenüber der bei den vollhydraulischen Vorgängergeneration. Dass der Schnellwechslern erzielt hat“, Baggerfahrer zum Wechseln so Per Väppling, Marketing- und der hydraulischen Anbaugeräte Vertriebsleiter bei Rototilt Group die Kabine nicht verlassen AB. QuickChange™ ermöglichst Baggerfahrern, das muss, steigert die Effizienz und hydraulische Anbaugerät zu wechseln, ohne die die Sicherheit. Auch entfällt www.rototilt.com Kabine zu verlassen.

38 2020/3 DigiMessenger Artikel Premium

PW158-11 – Komatsu erweitert die Mobilbagger Produktpalette

Komatsu bringt mit dem PW158- Mobilbagger werden immer 11 einen weiteren Mobilbagger mehr zum Werkzeugträger. auf den Markt. Er wurde bei der Der PW158-11 ist ein vielfältig Komatsu Germany GmbH in einsetzbarer Mobilbagger. Seine Hannover entwickelt und wird an besonderen Stärken spielt er in diesem Standort auch exklusiv engen Baustellen aus und eignet gefertigt. Der PW158-11 erweitert sich damit hervorragend für das bestehende Produktprogramm alle Kunden, die oft auf diesen im 16t Segment. Durch den Baustellen schwere Arbeiten Standortvorteil von Forschung und ausführen wollen. Dank seiner Entwicklung, geografisch mitten ausgewogenen Leistung werden im größten Mobilbaggermarkt aber auch Kunden mit anderen der Welt, konnten die Anforderungen viel Freude mit Kundenanforderungen sowie unserem neuen Mobilbagger Ergebnisse des kontinuierlichen haben. Verbesserungsprozesses an diesem Modell optimal umgesetzt https://www.komatsu.eu/de Der neue PW158-11 eignet sich neben her- kömmlichen Einsätzen auch für Arbeiten auf werden. beengtem Raum.

PW158-11

39 2020/3 DigiMessenger Issue Focus Brecher- und Recyclinganlagen

Über Mobile Brecher & Siebe

Mobile Brecher oder mobile stationären Brechanlagen. verwendet, wobei das Material Brechanlagen sind Maschinen- Es gibt verschiedene in unterschiedliche Größen Bausteine, die für die Arten von Brechern, die unterteilt wird. Die Siebe sind Verarbeitung von Gesteinen, sich je nach verwendeter mit einer vibrierenden Siebbox Mineralien und anderen Zerkleinerungstechnologie ausgestattet, die eine Reihe Zuschlagstoffen auf Baustellen, unterscheiden: Prallbrecher, von Siebbelägen enthalten. in Minen und in Steinbrüchen Backenbrecher und Anschließend fällt das gesiebte ausgelegt sind. Sie werden auch Kegelbrecher. Mobile Brecher Material auf Förderbänder und häufig in Recyclinganwendungen können mit einem Siebsystem in entsprechende Behälter, eingesetzt und bieten eine ausgestattet werden, um vor die die Endprodukte lagern. ausreichende Mobilität, dem Zerkleinern ein aggregiertes Die verarbeiteten Mineralien wodurch die Betriebskosten Vorsieben durchzuführen. können in Bauanwendungen gesenkt werden. Dies ist ein Mobile Siebe oder Siebanlagen wiederverwendet werden. großer Vorteil gegenüber werden zur Absiebung

Auswahl neuer in 2019-2020 gebauten Brecher und Siebe

Kleemann MS 703i EVO

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

3-deck screener 33 t 8 m3 345 t/hr

Kleemann MS 953i EVO

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

3-deck screener 36.3 t 8 m3 500 t/hr

Kleemann MC 120 Zi PRO

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

Jaw crusher 72 t 13 m3 650 t/hr

Metso Lokotrack ST4.10

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung PHOTO 3-deck screener 33.5 t 8 m3 -

40 2020/3 DigiMessenger Issue Focus Brecher- und Recyclinganlagen

Metso Nordtrack S3.9

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung PHOTO 2-deck screener 36.4 t 10 m3 -

Terex-Finlay IC-110RS

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung PHOTO Impact crusher 35.6 t 3.3 m3 -

Terex-Finlay 696 3-deck

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung PHOTO 3-deck screener 40.05 t 8 m3 -

McCloskey C2R

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

Cone crusher 52 t 5 m3 -

McCloskey S250

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

3-deck screener 40 t 10 m3 -

Powerscreen Trakpactor 230SR

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung

Impact crusher 29.3 t 2.6 m3 250 t/hr

Sandvik QE442

Maschinentyp Eigengewicht Trichtervolumen Produktionsleistung PHOTO 3-deck screener 37.07 t 8.5 m3 900 t/hr

Sehen Sie die restlichen in 2019-2020 gebauten Brecher und Siebe auf LECTURA Specs

41 2020/3 DigiMessenger Interview Rockster

Rockster präsentiert neue Zerkleinerungstechnologien und stärkt seine Position auf dem US-Markt

Wolfgang Kormann, Papier, Holz, etc. beim Bauschutt- Geschäftsführer Rockster Austria Recycling ausgestattet. International GmbH, beschreibt die Hauptmerkmale des DUPLEX- Werden Sie in naher Zukunft an Systems, spricht über die aktuelle Messen teilnehmen? Situation im Unternehmen und skizziert seine Pläne für die nahe Die nächsten geplanten Messen Zukunft. finden im März 2021 in Österreich und in den USA statt. Die Branche wurde von der Coronavirus-Krise schwer Können Sie das DUPLEX-System getroffen. Wie waren Sie beschreiben? Was macht es so betroffen und welche einzigartig? Vorsichtsmaßnahmen mussten Sie treffen? Mit dem DUPLEX-System kann man mit einer Basismaschine Die Corona Situation macht die zwei verschiedene gesamte Wirtschaft momentan Zerkleinerungstechnologien Wolfgang Kormann, Geschäftsführer Rockster sehr unstabil, Firmen wollen betreiben. Jede Technologie, Austria International GmbH abwarten und machen sich Sorgen Prallbrecher sowie Backenbrecher, die Staaten meist noch um die nahe Zukunft. Dadurch bietet für bestimmte mehr gezwungen, über sinken Investitionen in neue Anwendungen besondere Vorteile. Recyclinglösungen nachzudenken, Anlagen, sie werden gestoppt oder Mit DUPLEX hat man ein da die Lagerplätze und Deponien zumindest aufgeschoben. einzigartiges System, bei dem sehr begrenzt sind. Darüber die Brechkammern innerhalb hinaus setzen die europäischen Wir haben unsere weniger Stunden auf einer Regierungen Recycling-Auflagen Arbeitsbedingungen im Basismaschine ausgetauscht gesetzlich durch, um dieses Lockdown rasch an die neue und somit ein Prallbrecher in Geschäft voranzutreiben. Situation angepasst und sowohl einen Backenbrecher – oder Kurzarbeit, als auch Home- umgekehrt - verwandelt werden Was sind Ihre Pläne für 2021? Office Modelle eingeführt, kann. So wird mit nur einer auch das Produktionspersonal Basismaschine ein viel breiteres Von der Marktseite aus werden wir wurde den Hygiene- und Anwendungsfeld abgedeckt uns darauf konzentrieren unser Abstandsvorschriften gemäß und die Maschinenauslastung Händlernetz auf dem US-Markt geschult und eingesetzt. optimiert. Zudem spart man sich auszubauen, da wir an diesen die Investition in zwei separate Markt glauben. Haben Sie kürzlich neue Modelle Brechanlagen. auf den Markt gebracht? Im Zusammenhang mit der Können Sie den Recyclingsektor Produktpalette im Jahr 2021 Wir haben bestehende Modelle mit in Europa und den USA kurz werden wir ein zusätzliches den neuesten treibstoffsparenden vergleichen? Gibt es große neues Modell auf den Markt und emissionsarmen Motoren, Unterschiede? bringen, das ebenfalls zu einem sowie Windsichter-Systemen weiteren Wachstum unserer neuen zum raschen Entfernen von Die Grundidee des Recyclings Produktionslinie in Österreich Leichtstoffen wie Styropor, Plastik, ist dieselbe. In Europa sind beiträgt..

42 2020/3 DigiMessenger Interview Machine26

Machine26: Die Pandemie könnte ein Katalysator für digitale Innovationen in der Bauindustrie sein

Die Firma Machine26 bietet ihre Baumaschine über unsere eine digitale Handelsplattform Website WirKaufenMaschinen.de für gebrauchte Baumaschinen einfach und innerhalb kürzester an. Wir hatten die Gelegenheit, Zeit verkaufen. und des Verkaufs von neuen Steffen Schweiger, Co-CEO, Baumaschinen. einige Fragen zu ihrem Geschäft Unseren Käufern – Händlern und der digitalen Transformation von gebrauchten Baumaschinen Das hat sich natürlich auch der Branche zu stellen. – bieten wir einen neuen und auf unser Inzahlungnahme- sicheren Beschaffungskanal. Der Geschäft ausgewirkt. Außerdem Könnten Sie kurz Ihr Kern unseres Geschäftsmodells sind Endkunden durch die Unternehmen vorstellen? In sind digitale Lösungen zum Prüfen zunehmende Marktunsicherheit welchem Geschäftsbereich ist Ihr der Maschinen. vorsichtiger, wenn es um Unternehmen tätig? Investitionsentscheidungen geht. Warum Machine26? Gibt es eine Niklas Fritz, Christian Schweiger Symbolik in dieser Zahl? Es besteht jedoch eine und ich haben Machine26 im Jahr beträchtliche Nachfrage nach 2019 gegründet, um den Handel Ja, genau. Die Zahl 26 im Gebrauchtmaschinen und die mit gebrauchten Baumaschinen Namen steht für die Position Preise bleiben auf einem hohen effizient und sicher zu machen. Wir des chemischen Elements Niveau. Darüber hinaus sehen wir bieten eine Handelsplattform für Eisen im Periodensystem – einige positive Entwicklungen. Aus Baumaschinen mit automatisierter dem Hauptbestandteil jeder unserer Sicht führt die Pandemie Prüfung an. Baumaschine. Ein praktischer zu einem Digitalisierungsschub Nebeneffekt: Wir sind kein weiterer in der Bauindustrie. Um den Mit unserer Lösung wird der Marktplatz mit einer 24 im Namen. Herausforderungen von COVID-19 Verkauf einer Maschine einfach zu begegnen, spielt digitale und schnell. Für OEMs und Wie wurden Sie von COVID-19 Innovation für die verschiedenen Vertragshändler erleichtern wir beeinflusst? Marktteilnehmer eine immer die Wiedervermarktung von größere Rolle. gebrauchten Baumaschinen. COVID-19 führte zu einer Außerdem können Endkunden Verlangsamung der Produktion Wie für viele Unternehmen ist die Pandemie auch für uns eine Herausforderung – und wir machen das Beste daraus. Bei Machine26 haben wir den Lockdown genutzt, um uns verstärkt auf die Produktentwicklung zu konzentrieren. So können wir unseren Kunden mittlerweile noch bessere Lösungen anbieten.

Warum ist Digitalisierung für Sie so wichtig? Worin sehe Sie die Vorteile? Christian Schweiger (CTO), Steffen Schweiger (Co-CEO) und Niklas Fritz (Co-CEO)

43 2020/3 DigiMessenger Interview Machine26

Unser Team ist seit Jahren in der Baubranche tätig. Obwohl es sich dabei um eine der wichtigsten Industrien handelt, ist sie immer noch durch traditionelle Prozesse geprägt. Das Potenzial digitaler Lösungen wird bei weitem noch nicht genutzt.

Wir haben gesehen, dass der Handel mit Baumaschinen ineffizient und unsicher ist: Kapitalkosten, Zeitaufwand und Transaktionsrisiken sind immer noch zu hoch – lassen sich aber durch den Einsatz von Technologie leicht reduzieren. Deshalb bieten wir eine digitale Lösung an, die kundenorientiert und einfach ist. Steffen Schweiger (Co-CEO), Vertrieb & Operations Sie umfasst einen transparenten Vertrauen geprägt. Wir kennen und zuverlässigen Bericht über Konzentrieren Sie sich nur auf unsere Verkäufer meist sehr gut, den Maschinenzustand, was den deutschen Baumarkt oder weil wir mit ihnen regelmäßig maßgeblich zu mehr Effizienz und sind Sie weltweit tätig? Geschäfte machen. Sicherheit auf dem Markt beiträgt. Als noch sehr junges Ein sehr wichtiger Teil unseres Das Ziel von Machine26 ist der Unternehmen liegt unser Fokus Geschäfts ist die Prüf-Lösung. digitale Wandel in der Baubranche. auf dem europäischen Markt, Unsere Plattform liefert detaillierte Wir wollen diesen aber nicht von insbesondere auf Deutschland. Informationen über den Zustand heute auf morgen, sondern Schritt Der Handel ist jedoch seit jeher jeder einzelnen Maschine. Dies für Schritt und Hand in Hand mit international. Unser Bestreben ist ein großer Vorteil für unsere unseren Kunden. ist es daher, die beste Lösung für Käufer, denn sie können alles im den internationalen Handel mit Voraus prüfen – wie in der Offline- Welche Maschinentypen befinden Maschinen zu schaffen, indem wir Welt, nur effizienter. sich in Ihrem Portal? neue Standards bei der Prüfung und Sicherheit setzen. Was sind Ihre Pläne für die nahe Unser Schwerpunkt liegt auf Zukunft? Baumaschinen. Zurzeit sind Wie stellen Sie sicher, dass den die beliebtesten Maschinen auf Verkäufern vertraut werden kann? In naher Zukunft wollen wir unser unserer Plattform Bagger, Radlader Geschäft ausbauen und Schritt für und Dumper. Nichtsdestotrotz Für das Inzahlungnahme- Schritt weitere Kunden von unserer bieten wir schon heute viele Geschäft arbeiten wir mit Lösung überzeugen. Wir wollen verschiedene Arten von Maschinen OEMs und Vertragshändlern den Handel mit Baumaschinen an. Dieses Angebot werden wir auf partnerschaftlicher Ebene digitalisieren und zu einem in Zukunft gegebenenfalls noch zusammen. Die Beziehungen effizienteren und sichereren Markt erweitern. sind von hohem persönlichem beitragen.

44 2020/3 DigiMessenger Interview Simex

Entdecken Sie die VSE- Sieblöffel und Separatorlöffel-Reihe von Simex

Alessandro Ferrin, Marketingleiter von Simex, erläutert die Auswirkungen der Pandemiesituation auf das Unternehmen, die digitalen Trends in der Branche und die Pläne für das folgende Jahr. Darüber hinaus stellt Uwe Basler, Vertriebsleiter für Deutschland, das Sieb- und Brechprogramm von Simex vor, einschließlich der VSE- Sieblöffel.

Die Branche wurde von der Coronavirus-Krise schwer getroffen. Wie waren Sie betroffen und welche Vorsichtsmaßnahmen mussten Uwe Basler, Vertriebsleiter Deutschland Sie treffen? strenge Sicherheitsprotokolle aktiviert, die die Umstrukturierung Wir haben vor 3 Jahren begonnen Simex ist ab dem 4. Mai in allen der Arbeitsschichten, den die digitalen Kanäle massiv zu Produktionsabteilungen zu 100% kontrollierten und eingeschränkten nutzen. Dank eines speziellen einsatzbereit. In Übereinstimmung Zugang, die medizinische Projektes, welches wir gestartet mit den nationalen Dekreten haben Unterstützung, die programmierte haben, können wir, um die wir unsere Versammlungsräume Desinfektion und die Verteilung Art und Weise, wie wir mit und die Arbeitsweise unserer persönlicher Schutzvorrichtungen Kunden kommunizieren, und Mitarbeiter sorgfältig umgestaltet, umfassen. die Endbenutzer unterstützen, um Aufträge umgehend zu neugestalten. Diese digitalen erfüllen und die maximale Wie ist Ihre Meinung zu digitalen Möglichkeiten sind heute mehr Gesundheitsversorgung Produkteinführungen und Online- denn je sehr wichtig und müssen unserer Mitarbeiter zu Webinaren? Möchten Sie diesem genutzt werden. Eine wirklich gewährleisten. Es wurden Trend in Zukunft folgen? gut integrierte Verbindung zwischen traditionellem Marketing und digitalen Kanälen ist der beste Weg, um immer mit dem Markt, Partnern, Händlern und Endbenutzern in Kontakt zu bleiben.

Welche Arten von Sieb- und Brechgeräten bieten Sie an?

Sieblöffel als Schaufel für Bagger im Einsatz als Sieb- und Separator: Die Besonderheit liegt in der VSE Sieblöffel Separatorlöffeln Tatsache, dass die Körnung

45 2020/3 DigiMessenger Interview Simex

hydraulisch von der Kabine aus Abbruchmaterial usw. verstellt werden kann. Wie viele Modelle bieten Sie bei Brecherlöffel für Bagger und Lader: der VSE-Modellreihe an und an Bei den Brechergeräten handelt es welchen Maschinen können sie sich um Wellenbrecher mit Zähnen angebracht werden? und Konterzähnen. Der Vorteil liegt darin das auch in Präsenz Es gibt 4 Modelle für Bagger von 8 von weicherem und elastischem bis 50 t. An allen Modellen können Material gebrochen werden kann. die Werkzeuge kurzfristig für die unterschiedlichen Materialen Können Sie die Hauptmerkmale ausgetauscht werden, wobei es 4 von Simex VSE Sieblöffel Versionen gibt. Separatorlöffeln beschreiben?

Was sind Ihre Pläne für das VSE Sieblöffel Separatorlöffeln Bei den Sieblöffeln VSE kann nächste Jahr? die Korngrösse stufenlos hydraulisch von der Kabine aus Unser führender Gedanke ist jetzt alität Seite an Seite mit unseren verstellt werden. Somit kann eine „ARBEIT HILFT ARBEITEN“. Dies Händlern und Endbenutzern ste- Löffelfüllung unterschiedlich bedeutet, aktiv am Neustart des hen, um ihnen das zu bie­ten, was fein ausgesiebt werden ohne nationalen und internationalen Simex seit jeher ent­wickelt und auf das Material neu aufzunehmen. Produktivsystems teilzunehmen, den Markt gebracht hat: innovative Die leicht auszutauschenden während wir unsere Rolle spielen und leistungsstarke Anbaugeräte, Werkzeuge welche auf die werden, wie wir es seit Jahrzehnt- technische Unter­stützung und Welle gesteckt werden gibt es en tun. Wie immer werden tatsächliche Lösungen, konkret für verschiedene Materialtypen wir mehr denn je mit Sorgfalt, und dauerhaft. wie Humus, Muttererde, Entschlossenheit und Profession-

Die neuen PALFINGER Abrollkipper überzeugen – mit der innovativen Folgesteuerung – durch einfachste Handhabung: Funktion vorwählen, Hebel anziehen, fertig. Die unterbrechungsfreie Ausführung aller hydraulischen Funktionen garantiert zudem mehr Wirtschaftlichkeit und Sicherheit. Ab sofort sind alle PALFINGER Geräte ab 13 t Hubkraft mit dieser Steuerung ausgerüstet – ganz ohne Aufpreis. Dank der Vernetzung mit 150 Servicepartnern für Abroll- und Absetzkipper sind Sie mit PALFINGER immer und überall: GUT AUFGEHOBEN.

PLUS HOCH DREI: KOMFORTABEL, SCHNELL UND EINFACH! 46 2020/3 DigiMessenger PALFINGER.COM Peter Reimer, Geschäftsführer, Johannes Wentorp GmbH Interview MB Crusher

MB Crusher: Die Nachteile der Corona-Krise brechen

Wir haben mit einem Berater von MB Crusher gesprochen und vom Unternehmen neue Nachrichten über ihre zukünftigen Schritte und Pläne, die Qualität der verwendeten Materialien für ihre Brecherlöffeln und die neuesten interessanten Projekte, die von ihrer Produktpalette verwaltet werden, erhalten.

Die Branche wurde von der Coronavirus-Krise schwer getroffen. Wie waren Sie betroffen und welche BF90.3 Backenbrecherlöffel mit Liebherr 914 Raupenbagger Vorsichtsmaßnahmen mußten Unter den zwischenmenschlichen Wie ist Ihre Meinung zu Online- Sie treffen? Gesichtspunkten, wurden zum Produkteinführungen und Zeitpunkt der Wiedereröffnung Webinaren? Möchten Sie diesem Unter einigen Aspekten war es der Büros, die von der Regierung Trend in Zukunft folgen? eine schwierige Zeit, jedoch erlassenen Dekrete zu den haben viele Baustellen nicht Vorsichtsmaßnahmen umgesetzt: Das Leben aller musste sich neu aufgehört zu arbeiten und daher Masken, Versammlungsverbot, organisieren, um mit dieser neuen hatte es auf unsere Produktion Installation von Strukturen, Realität zu leben. Es ist daher keine großen Auswirkungen. Die um die Arbeitsplätze isoliert nicht ausgeschlossen, dass sich Vertriebsmitarbeiter arbeiteten zu halten, ständige Hand- und auch die Vertriebswelt und der jedoch hart daran, mit den Kunden Arbeitsplatzhygiene mit speziellen Messesektor neu organisieren in Kontakt zu bleiben und neue Produkten, Körpertemperaturtest muss, um eine nachteilige potenzielle Kunden zu finden. beim Eintritt in das Unternehmen. Situation optimal zu bewältigen. Wir hoffen jedoch, dass sich die Aussichten verbessern und das 2021 die normalen Aktivitäten wieder aufgenommen werden können.

Wie lange dauert es durchschnittlich, eins Ihrer Anbaugeräte an einem Bagger anzubringen oder auszutauschen?

Es ist eine sehr schnelle Arbeit, die nur wenige Minuten in Anspruch nimmt.

BF120.4 Backenbrecherlöffel mit Case CX350D Raupenbagger

47 2020/3 DigiMessenger Interview MB Crusher

Welche Materialien verwenden Sie, um die Lebensdauer Ihrer Anbaugeräte zu verbessern?

Mit mehr als 60 Jahren Erfahrung in den Bereichen Erdbewegung, Straßenbau, Abbruch und Steinbruch haben wir die besten Materialien für den Bau unserer Produkte gewählt. Wir wissen, wie stark unsere Maschinen einem Verschleiß ausgesetzt sind, und daher ist jedes einzelne Teil so konstruiert, dass es so wenig wie möglich beschädigt wird und für eine lange Lebensdauer. Die ausgewählten Materialien sind von höchster Qualität, wie beispielsweise der Stahl, Hitachi Zaxis ZX38U aus dem das Gehäuse des funktionieren und hohe Leistungen Landstraße eingebrochen war und Backenbrecherlöffels besteht. gewährleisten. ein Ortsteil und seine Bewohner Unsere Produkte sind Hardox isoliert blieben. in my Body-zertifiziert und Können Sie interessante Projekte garantieren, dass sie strengen nennen, die kürzlich von Ihrem Die Baustelle war aufgrund Qualitätskontrollen unterzogen und Unternehmen umgesetzt wurden? seiner geografischen Lage von einer strengen technischen schwer zu erreichen. Das Kommission genehmigt wurden. Während des lockdown erhielten Problem bestand daher darin, wir eine Anfrage nach Ausrüstung den Entwässerungskies auf die MB Crusher-Produkte sind von einem Unternehmen, das Baustelle zu bringen, sowohl so konzipiert, dass sie in ein Projekt zur Begrenzung eines für das zeitnahe Eintreffen des jeder Situation und unter Abhangs erhalten hatte. Eine Materials selbst als auch aufgrund allen Witterungsbedingungen dringende Arbeit, da ein Stück der Beschaffenheit des Ortes.

Die Lösung bestand darin, einen MB-S10-Sieblöffel auf den bereits auf der Baustelle vorhandenen Bagger zu installieren, um das Material zu selektieren und zu reinigen, das aus der Entfernung der vorherigen Barriere resultierte, und einem MB-C50- Backenbrecherlöffel, um die Steine zu zerkleinern. Der Sieblöffel wurde auch verwendet, um regelmäßige und saubere Kieselsteine zu erhalten, um eine Entwässerung nach dem neuesten Stand der Kalksteinrecycling - BF120 Backenbrecherlöffel und MB-S18 Sieblöffel montiert auf Kobelco SK 350 und Liebherr 934 Technik zu erreichen.

48 2020/3 DigiMessenger Interview Steinexpo

steinexpo 2021: Europas größter Basaltsteinbruch wird zum 11. Mal Gastgeber der Branche sein

Die Fachmesse für des Messeorganisators Geoplan Mineralverarbeitungstechnologie GmbH, erklärt dazu: „Schweren und die Demo-Show steinexpo Herzens muss die steinexpo wurden aufgrund der Corona- 2020 aufgrund behördlicher Krise auf 2021 verschoben. Vorgaben verschoben Wir hatten die Gelegenheit, werden. Über den neuen Frau Kathleen Niendorf, Termin für die 11. Steinbruch- Redakteurin bei Geoplan GmbH Demonstrationsmesse haben und steinexpo-Presse-Service, wir im engen Kontakt mit den um zusätzliche Informationen Betreibern des Messesteinbruchs über die neu geplante Messe und den zuständigen Behörden zu bitten, die erneut im größten entschieden. Die Verschiebung Basaltsteinbruch Europas in trifft uns – als eher kleineren der Nähe von Homberg/Nieder- Messeveranstalter – mit einiger Ofleiden im Bundesland Hessen Wucht. Dennoch heißt es jetzt in Deutschland stattfinden wird. nach vorn zu schauen: Gemeinsam Kathleen Niendorf Jung-Redakteurin | steinexpo-Presse-Service werden wir die 11. steinexpo vom Die Messe steinexpo wurde auf 14. bis 17. April nächsten Jahres Wie viele Aussteller und Besucher 2021 verschoben. Wann ist der wieder zur erfolgreichen Plattform erwarten Sie im Jahr 2021? aktuelle Termin und wie sind Sie für die Roh- und Baustoffindustrie mit der Situation umgegangen? machen“. Nach der Mitteilung über die Corona-bedingte Verschiebung Die 11. Internationale Wie haben die Aussteller auf die der 11. steinexpo hat der Demonstrationsmesse für die Roh- Verschiebung reagiert? Messeveranstalter allen bereits für und Baustoffindustrie wird (formell die ursprünglich im August 2020 unter Corona-Vorbehalt) vom 14. Die bereits angemeldeten geplante Messe angemeldeten bis 17. April 2021 am bekannten Aussteller zeigen sehr großes Ausstellern die Möglichkeit Ort im hessischen MHI-Steinbruch Verständnis. Dr. Rese erfreut: eröffnet, ihre Teilnahme in 2021 Nieder-Ofleiden stattfinden. Die „Fast alle spiegelten zurück, durch einfache Erklärung zu Hoffnung, die Messe wie geplant dass diese Entscheidung aus der bestätigen. Die Resonanz darauf stattfinden zu lassen, blieb Perspektive von Ende April 2020 ist positiv beeindruckend: Rund noch bis weit in den April 2020 die einzig vernünftige Lösung 85 % der Aussteller nahmen hinein erhalten. Die zuständigen war. Alle Unternehmen, die sich diese Möglichkeit direkt an und hessischen Behörden haben dann auf der Messe engagieren, hoffen bereiten nun ihren Auftritt im April jedoch entschieden, dass die 11. natürlich auf einen wiederholten 2021 in Nieder-Ofleiden vor. Die steinexpo nicht wie geplant Ende Erfolg. Dieser stellt sich in einem übrigen Aussteller sagten i.d.R. August 2020 stattfinden kann. beruhigten, sicheren Umfeld aber nicht ab, sondern lassen sich viel einfacher ein, als in einer stop- die Möglichkeit ihrer Teilnahme Dr. Friedhelm Rese, and-go-Phase“. im Moment – häufig ebenfalls Geschäftsführender Gesellschafter Corona-bedingt – noch offen.

Hinsichtlich der Besucherzahl wird diese natürlich stark von der Corona-Situation im April 2021 abhängen. „Hier sind wir aber durchaus positiv eingestellt: Die Roh- und Baustoff-Industrie ist

49 2020/3 DigiMessenger Interview Steinexpo

von der Pandemie nur am Rande betroffen; „unsere“ Werke laufen. Demzufolge ist der Bedarf nach einem persönlichen Austausch hoch, so dass wir von einem hohen Besucherzuspruch ausgehen und alle Hygiene-Maßnahmen auf diesen auslegen.“

Was sind die wichtigsten Highlights der Messe?

Wie jedes Jahr wird es wieder spezielle Highlight-Themen geben – lassen Sie sich überraschen. Die Frühjahrs-steinexpo 2021 wird in vielerlei Hinsicht ganz besonders werden.

Sehen Sie immer noch ein Potenzial in Messen angesichts einer Situation wie der Corona- Krise?

Die Messebranche ist sicherlich durch Corona besonders be- und getroffen. Aber es gibt auch eine Zeit mit und nach Corona. Und gerade hier sind Messen unverzichtbar. Denn durch den direkten Kontakt untereinander ist ein Erfahrungsaustausch besser möglich als auf anderen Wegen. Auf (unseren) Messen können Großgeräte live erlebt und so vor Ort Geschäfte abgeschlossen werden. Man nicht. Natürlich wird Corona die Messen in Zukunft wieder kann Dinge „anfassen“ und Messewelt verändern. Doch mit erfolgreich stattfinden. sich im „Live-Test“ überzeugen. ausreichenden Sicherheits- und So etwas geht online einfach Hygienevorkehrungen werden

50 2020/3 DigiMessenger In the Next Issue

Topics

Transportation Material Handling DigiMessenger

Focus DigiMessenger

Trucks & Trailers

Tires & Engines Forklifts & Telehandlers Trucks & Trailers

Would you like to contribute to the upcoming issue (article, interview, job story)?

Please contact the editor Patrik Eder

Mail: [email protected]

For advertisement requests, please contact Petr Thiel

Mail: [email protected]

Phone: +49 (0)911 43 08 99-18

51 2020/3 DigiMessenger