DOCSLIB.ORG

Harvester / Slasher / Chainsaw Chain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Harvester / Slasher / Chainsaw Chain HARVESTER / SLASHER / CHAINSAW CHAIN 3/4" PITCH Chipper .404 PITCH Chamfer Cutter Available by individual loop (as priced) or by the case. Chisel™ PART QTY PER PART QTY PER DESCRIPTION DESCRIPTION NUMBER CASE NUMBER CASE B8HC-64EB Carlton® .404 / 64 drive link 20 G7SP-55E Carlton® .750 / 55 drive link 5 B8HC-70EB Carlton® .404 / 70 drive link 20 G7SP-56E Carlton® .750 / 56 drive link 5 B8HC-71EB Carlton® .404 / 71 drive link 20 G7SP-60E Carlton® .750 / 60 drive link 5 B8HC-72EB Carlton® .404 / 72 drive link 15 B8HC-74EB Carlton® .404 / 74 drive link 15 G7SP-66E Carlton® .750 / 66 drive link 5 B8HC-75EB Carlton® .404 / 75 drive link 15 G7SP-68E Carlton® .750 / 68 drive link 5 B8HC-76EB Carlton® .404 / 76 drive link 15 B8HC-77EB Carlton® .404 / 77 drive link 15 G7SP-90E Carlton® .750 / 90 drive link 5 B8HC-78EB Carlton® .404 / 78 drive link 15 G7SP-96E Carlton® .750 / 96 drive link 5 B8HC-79EB Carlton® .404 / 79 drive link 15 B8HC-81EB Carlton® .404 / 81 drive link 10 50 ft. Reel .750/122 G7SP-50R 1 Carlton® Harvester Chain B8HC-82EB Carlton® .404 / 82 drive link 15 B8HC-85EB Carlton® .404 / 85 drive link 15 B8HC-86EB Carlton® .404 / 86 drive link 15 B8HC-87EB Carlton® .404 / 87 drive link 15 B8HC-88EB Carlton® .404 / 88 drive link 15 B8HC-89EB Carlton® .404 / 89 drive link 15 B8HC-90EB Carlton® .404 / 90 drive link 15 B8HC-91EB Carlton® .404 / 91 drive link 10 B8HC-93EB Carlton® .404 / 93 drive link 10 B8HC-94EB Carlton® .404 / 94 drive link 10 B8HC-96EB Carlton® .404 / 96 drive link 10 B8HC-97EB Carlton® .404 / 97 drive link 10 B8HC-98EB Carlton® .404 / 98 drive link 10 B8HC-101EB Carlton® .404 / 101 drive link 20 100 ft. Reel .404/080 B8HC-100RW 1 Carlton® Harvester Chain For .404 drive link quantities not listed, use $0.30 per link for price. G7SP - 3/4" PITCH B8HC - .404" PITCH 3/8" CHAINSAW COMPONENTS Tie strap Preset tie strap TTiDieer i ssvtterTr alaiinepp sktrap PPrreeseseLPHtrt ec titiuseete t s setittrrreaa spptrap DDRHrriiDvv ercei u vllinteint elkTkinriek strap LLHHL H cPcu ucrtuettseteteertr rtie strap RHRH Dc curuittvttteteee rlrinr k LH cutter RH cutter TIE STRAP PRESET TIE STRAP RH CUTTER LH CUTTER DRIVE LINK B8HC 42997TS BB88CHAINHHCCB 84H29C98PS 44229949397174T1T28DSS99L7TS 44232B909989488982PLH9PHS9SC8PS 4433140113818D18D8R18D4LHL29L97TS 44433300088899L4LH2H998PS 4434303084088R388R18R1H8DHHL 43089LH 43088RH TYPE G7SP 43202 GG77SSPPG7S43P203 4433242030224034202 44G3322700431S32P03 44332420302404043202 444333222001143203 4434323240230020004 43201 43200 PART # QTY PART # QTY PART # QTY PART # QTY PART # QTY G7SP 43202TS (.750) 25 43203PS 25 43200CT 25 43201CT 25 43204DL 25 B8HC 42997TS 25 42998PS 25 43088RH 25 43089LH 25 43118DL 25 (.404) 552354 (.050) 25 Chainsaw 43003 25 43012 25 43191 25 43190 25 552355 (.058) 25 CHAINSAW CHAIN Carlton, one of the leading brands in forestry products for over 50 years, has been known for providing high-quality chainsaw chains that offer both performance and durability to meet and exceed the needs of seasoned perfessionals. CUTTER PART # PACKAGE GRIND GAUGE SEQUENCE DRIVERS TYPE A2LM-060G Loop Round .058 Chisel Standard 60 A1LM-060G Loop Round .050 Chisel Standard 60 A2LM-068G Loop Round .058 Chisel Standard 68 A1LM-068G Loop Round .050 Chisel Standard 68 A2LM-072G Loop Round .058 Chisel Standard 72 A1LM-072G Loop Round .050 Chisel Standard 72 A2LM-084G Loop Round .058 Chisel Standard 84 A1LM-084G Loop Round .050 Chisel Standard 84 A2LM-100U Reel Round .058 Chisel Standard 1640 A1LM-100U Reel Round .050 Chisel Standard 1640 1010 Kennedy Memorial Dr. Oakland, ME USA 04963 Carlton® is marketed in 207-465-9575 • 800-323-3708 North America by Wallingford's Inc. www.wallingfords.com • [email protected] 022219 .
Load more

Recommended publications
  • Sareko Tools and Forgings
    +91-8048006743 Sareko Tools And Forgings https://www.indiamart.com/sarekotools/ We manufacture and export a comprehensive range of hand digging tool, hand gardening tools, outdoor gardening tools, plumbing tools, antique carpentry tools & automotive tools. About Us Incepted in the year 1985, Sareko Tools and Forgings, is a eminent company involved in Manufacturing and Exporting a wide gamut of Precision Engineered Hand Tools, Garden Tools, Plumbing Tools, Antique Carpentry Tools, Automotive Tools. Our products range includes Garden Spades And Forks, Garden Hoes, Hand Cultivator, Garden Hand Cultivators, Shovel Head, Spoke Shave, Woodworking Clamps, Hand Drill Machines, Claw Hammers, Sledge Hammer Head, Box Spanners, Bearing Pullers, Grease Guns, Combination Spanner Set CRV Steel, Pin Punch Set, Hex Keys, Steel Pliers, Fence Plier, Slip Joint Plier, Curved Blade Slasher, Double Edge Dunse Slasher, Garden Leaf Rake, Teeth Rake Wooden Handle, Garden Shovels, Garden Digging Fork, Plastic Handle Hedge Shear, Wooden Handle Hedge Shear and Expansion Bolts. These hand tools meet the ever increasing demands of farmers, plumbers, carpenters and automotive engineers. Under the able guidance of our mentors Mr. Ramesh Chander and Mr. Ashok Paul, we have created a new benchmark of brilliance in the industry. Backed by their vast experience and business acumen we have carved a niche in this industry. We possess a well- equipped manufacturing plant that helps us in meeting the ever-increasing demand of our clients. Our team of experienced professionals
    [Show full text]
  • SSCA 2015 Program Almost Final Draft
    Day 1 Wednesday 1101 Wednesday 2:00 pm—3:45 pm Room: Meeting Room 3 Administrative Committee Meeting 1201 Wednesday 4:00 pm-6:45 pm Room: Florida V and VI Executive Council Meeting Day 2 Thursday 2101 Thursday 8:00 am—9:15 am Room: Florida V and VI Executive Council Meeting—Part 2 2202 Thursday 9:30 am-10:45 am Room: Meeting room 6 The Art of Communicating: Public Relations in a Complex Global Environment Sponsor: Public Relations Division Chair: Amy Muckleroy Carwile, Texas A&M Globalization and Public Relations: Intersections in Definition and Practice Ashley Deutsch, Purdue University Hacking the System: The Decline of Target’s Image Carrie Reif, University of Southern Mississippi Communicating Depression on Pinterest: Portrayals of Depression and Why Public Relations Practitioners Should Care Jeanine Guidry, Virginia Commonwealth University; Yuan Zhang, Virginia Commonwealth University; Yan Jin, Grady College of Journalism and Mass Communication University of Georgia; Candace Parrish, Virginia Commonwealth University STRAPS: A Model for Perfecting the Art of Public Sector Media Relations Christopher J. McCollough, Columbus State University Respondent: Mia Anderson, University of South Alabama 2203 Thursday 9:30 am-10:45 am Room: Meeting room 5 Prevention, Sensemaking, and Social Support: The Art and Craft of Applied Health Communication Sponsor: Applied Communication Division Chair: Ambar Basu, University of South Florida A Hands-on Approach to Breast Cancer Prevention Anna-Carrie Back, University of Kentucky Alexander L. Lancaster, West Virginia University Maria Brann, Indiana University-Purdue University Indianapolis [Fat]homing Funny: Humor as a Stigma-Management Tool Mary Beth Asbury, Middle Tennessee State University Phillip Wagner, University of Kansas Adrianne Kunkel, University of Kansas Hystersisters: A Content Analysis of Social Support and Self-Disclosure in an Online Health Forum Caroline S.
    [Show full text]
  • Redesigning Agricultural Hand Tools in Western Kenya WYCHE, OLSON, KARANU
    Redesigning Agricultural Hand Tools in Western Kenya WYCHE, OLSON, KARANU Research Article Redesigning Agricultural Hand Tools in Western Kenya: Considering Human-Centered Design in ICTD Susan Wyche Jennifer Olson Michigan State University, USA Mary Karanu Rural Outreach Africa, Kenya Abstract Human-centered design (HCD) is a creative approach to technology design that prioritizes users’ needs in the design process. It is characterized by three phases: understanding, ideation, and evaluation. Enthusiasm for using HCD per- sists among ICTD (information and communication technologies for development) researchers; funding agencies continue to support efforts to use the approach in development projects. However, published studies documenting each phase of the approach are few. Here, we present one such case study that documents our use of HCD to under- stand farmers’ hand tools in Kenya and to explore their ideas for new tools—designed to make weeding easier. We also present an evaluation of three redesigned tools, which were manufactured by jua kali (local metal workers). Our ªndings suggest that HCD resulted in improved tools. These ªndings motivate a discussion that elaborates on using HCD in ICTD. We suggest that the most signiªcant impacts of HCD may come from using the approach to under- stand diverse local conditions as they relate to design, and from jua kali integrating the approach into their design practices. Finally, we consider how HCD supports (and challenges) conducting ethical research. Keywords: agriculture, design thinking, human-centered design, HCI4D, jua kali, Kenya Introduction Over the last 15 years, there has been signiªcant enthusiasm among researchers, practitioners, and funding agencies for using a Human-Centered Design (HCD) approach to guide the development of technological solu- tions for socioeconomic problems in the developing world (Bazzano, Martin, Hicks, Faughnan, & Murphy, 2017; Gordon, Kramer, Moore, Yeung, & Agogino, 2017).
    [Show full text]
  • LAWN & Garden Equipment
    LAWN & garden equipment with US and imported components consumer tillers You don’t have to be a professional to own garden equipment that works and lasts. Our consumer tiller line is perfect for homeowners. We offer a wide array of easy to use tillers to provide you with the power and tine speed you need. Sturdiness, simplicity and ease of maintenance guaranteed, you only have to choose the model. Knowing that soil conditions and all gardeners are not alike, Maxim manufactures its tillers with options and the flexibility of a multitude of accessories. Choose your power, tine speed and attachments, then let the equipment help with the hard work of gardening. steel construction serviceable chain drive transmission ADJUSTABLE TILLING WIDTH 2-YEAR WARRANTY FOR CONSUMERS 2 MAXIM | maximmfg.com CONSUMER TILLERS heavy-duty transmission MINI MA Tiller/cultivator MTC35H MS50B MS50NB ENGINE Honda GX35, 35 cc Briggs & Stratton 750 Series, 163 cc Briggs & Stratton 550 Series, 127 cc TRANSMISSION Exclusive, Heavy-Duty Gear Drive Chain Drive (Available with Reverse) Chain Drive TINE SPEED (MAX) 250 RPM 78 RPM 78 RPM TINES Steel Forged Tines (6) Heat-Treated, Welded Slasher Tines Heat-Treated, Welded Slasher Tines TILLING WIDTH 7" to 16" 14" or 26" 14" or 26" TILLING DEPTH Up to 8" Up to 10" Up to 10" DRAG BAR Standard Standard Standard HANDLES 3/4" - .06" Thick Q195 Steel 1" - 14 Gauge Tubular Steel 1" - 14 Gauge Tubular Steel Stamped Hitch Stamped Hitch HITCH N/A with 3/8" x 1.5" Drag Stake with 3/8" x 1.5" Drag Stake 10 x 1.75 8 x 1.75 WHEELS 1.375" x 7" (for transport only) (for transport only) INCLUDED N/A N/A N/A ACCESSORIES LENGTH 47" 55" 55" WIDTH 17.25" 26" 26" HEIGHT 36.75" 36" 40" SHIPPING WEIGHT 50 lbs 135 lbs 130 lbs NEW Mini Max New to the line-up, Maxim’s Mini Max is a tiller/cultivator in one.
    [Show full text]
  • The Manuka & Kanuka Plantation Guide
    The Mānuka & KānukaPlantation Guide April 2017 ACKNOWLEDGEMENTS PREPARATION OF THE GUIDE WAS MADE POSSIBLE THROUGH FUNDING FROM THE FOLLOWING ORGANISATIONS. WE ARE ALSO GRATEFUL TO THE INTERVIEWEES WITHOUT WHOM THIS GUIDE WOULD NOT HAVE DELIVERED THE REAL-WORLD DATA, INSIGHTS, AND INFORMATION NEEDED. THANKS ALSO TO THE MANY BOFFA MISKELL LTD STAFF WHO GENEROUSLY SHARED THEIR EXPERTISE AND COSTS INFORMATION. DOCUMENT QUALITY ASSURANCE BIBLIOGRAPHIC REFERENCE FOR CITATION: BOFFA MISKELL LIMITED 2017. THE MĀNUKA & KĀNUKA PLANTATION GUIDE: PREPARED BY: LOUISE SAUNDERS, BOFFA MISKELL LIMITED INTERVIEWS BY: MATTHEW LAY REVIEWED BY: STEPHEN FULLER, BOFFA MISKELL LIMITED DON SHEARMAN, TARANAKI DISTRICT COUNCIL GRANT BLACKIE, WAIKATO REGIONAL COUNCIL ISSUE DATE: APRIL 2017 USE AND RELIANCE THIS REPORT HAS BEEN PREPARED BY BOFFA MISKELL LIMITED ON THE BASIS OF THE INFORMATION AVAILABLE TO US AT THE TIME OF PUBLICATION. BOFFA MISKELL DOES NOT ACCEPT ANY LIABILITY OR RESPONSIBILITY IN RELATION TO THE USE OF THIS REPORT. ANY USE OR RELIANCE BY A THIRD PARTY IS AT THAT PARTY’S OWN RISK. WHERE INFORMATION HAS BEEN OBTAINED FROM OTHER EXTERNAL SOURCES, IT HAS BEEN ASSUMED THAT IT IS ACCURATE, WITHOUT INDEPENDENT VERIFICATION, UNLESS OTHERWISE INDICATED. NO LIABILITY OR RESPONSIBILITY IS ACCEPTED BY BOFFA MISKELL LIMITED FOR ANY ERRORS OR OMISSIONS. FILE REF:T15144_MANUKA PLANTING_GUIDELINE_FINAL THE MAJORITY OF THE PLATES IN THIS DOCUMENT WERE TAKEN BY LOUISE SAUNDERS (BOFFA MISKELL), OTHER THAN THE FOLLOWING: PLATE 44 - REBECCA RYDER (BOFFA MISKELL), PLATE 56 - MARCUS GIRVEN (BOFFA MISKELL), PLATES 50 - 53 AND 55 - MATTHEW LAY, AND THE IMAGES THAT APPEAR ON PAGES 26 - 31 WERE PROVIDED BY SVEN STELLIN Table of Contents 1.
    [Show full text]
  • State FFA Forestry Career Development Event
    State FFA Forestry Career Development Event The State FFA Forestry Career Development Event will be conducted for teams of up to four contestants from each participating chapter of whose scores the top FOUR will be counted. Participants must come prepared to work outside in adverse weather conditions. They should have heavy coats, other warm clothes, rain gear and footwear. Contestants are expected to bring their own clipboards, pencils and calculators. EVENT RULES 1. No team member or team coach shall visit the event facilities to observe plant materials and facilities after May 1. Any team, team member or coach reported and proven to do so will cause the elimination of that team from competing in the State Forestry Career Development event. 2. Tools and Equipment: All tools and equipment will be furnished for the event. Participants must use the tools and equipment furnished at the event site. 3. Written Materials: All written materials will be furnished for the event. No written materials such as tests, problems and worksheets shall be removed from the event site. PHASE I: BASIC KNOWLEDGE AND CONCEPTS, GENERAL KNOWLEDGE EXAM (100 POINTS) Forty-five objective-type multiple-choice questions and five photo or sample identifications of common tree disease/damage agents will be selected from areas of the forestry industry reflected in the event objectives. This phase of the event will test participant’s knowledge and understanding of basic principles of forestry. TIME: Each individual will be allowed 30 minutes to complete this phase of the event. SCORING: Each answer has a value of two points, for a total maximum score of 100 points.
    [Show full text]
  • Camping Tools
    14730 All Purpose Utility Tool with Pouch • Heavy duty stainless steel construction • Spring action pistol grip black handle • Tools include: hatchet, hammer, linesman pliers, wire stripper and cutter; drop point blade, bottle opener, hex wrench, phillips screwdriver, serrated saw, utility saw with file and flat head screwdriver • Locks shut with riveted latch • Sturdy belt pouch • Clam shell 31737 Polished Steel Hand Axe • Polished drop-forged steel blade with flattened rear for hammering • Heavy-duty steel handle with rubber grip • PVC sheath/display insert 14724 Shape-Shift Folding Saw • Lightweight compact aluminum frame • 1" x 16-3/16" packed size • Weighs 9.4 oz. with one wood saw blade • Includes two durable 13.8" stainless steel blades • Black • Blister card Camping Tools 14726 Replacement Wood Saw Blades – 3/PK • 13.8" blade has diamond sharpened teeth • 3 Pack blister card 31800 Machete and Sheath Combo • 18" forged steel blade • Hard plastic handle with non- rust rivets • Rugged canvas sheath • Blister card 31912 Zombie Slasher Machete with Sheath • 15" tempered steel blade • 4 mm thickness • Bright orange and yellow handle with rubberized non-slip grip • Polyester sheath with snap button closure • Blister card 76 31670 Folding Pick Shovel • Rugged steel blade and pick with steel handle • Twist lock secures shovel blade and pick quickly and safely • Bulk packed/display label 31674 Deluxe Folding Shovel (boxed) • Constructed of the highest quality materials • Extended length measures 23-1/2" • Shovel folds down to a compact
    [Show full text]
  • Safe Use of Hand Tools Guide
    Gloucestershire Wildlife Trust Safe Use of Hand Tools Most of the practical conservation work carried out on Wildlife Trust nature reserves particularly that done by volunteers, is carried out with the use of hand tools. It is imperative that only GWT hand tools are used whilst volunteering; do not bring alone a tool from home. This is a guide on how to use the most frequently used tools safely, both for your own health and those around you, as all tool use has some level of risk, both to the person using the tool and to others in the party or members of the public. It is essential that all people involved in practical conservation work are shown how to use, carry and store these tools correctly before starting work. This not only makes the job easier to carry out, but also encourages safe working practices. If the guidance and recommendations given in this booklet are observed, the risks involved should be minimised. Bow saws: used for tree-felling, coppicing and scrub clearance. Use with one hand holding the saw and one holding steady the wood you are cutting. Keep this hand well clear of the blade as it could easily jump out of the cut. When carrying the saw, hold it down by your side with the blade facing down. Always place the saw on the ground when not in use. Never hang it from a tree or fence post. Choose the size of saw according to the size of timber you wish to cut. Never cut down a tree which is too big for the saw to handle.
    [Show full text]
  • SED Billhook.Pdf
    The billhook in English Dialect Between 1948 and 1961 the historic Survey of English Dialect (SED)* was carried out. At this time regional dialects were still common, and largely un-influenced by radio and television. From 1950 to 1961 over 400,000 items were collected by fieldworkers in over 300 locations across the length and breadth of England. In 1994 a Dictionary and Grammar of over 17,000 words was compiled by Clive Upton, J.D.A Widdowson and David Parry and published by Routledge. The re-issue of this scholarly work in paperback form in 2014 has given the general public access to a tome that was seldom found outside university libraries. From this reprint I have been able to abstract a wealth of information on the regional and dialect words used for billhooks and other tools. During this post-war period the billhook was still a common item in many households, and was still being used on many farms and in woodlands. In a time of austerity, before the era of consumerism, tools of this type were rarely thrown away or discarded, even when no longer used. In many homes they had become relegated to the role of kindling wood chopper, very few houses having central heating, and most having an open fireplace burning coal or logs. In the 19th century the term bill was more commonly used than billhook – by adding an adjective the two main types were thus described: Hand bill – a short handled bill, i.e. a billhook Hedging bill – a long handled bill, i.e.
    [Show full text]
  • Inventory to Archival Boxes in the Motion Picture, Broadcasting, and Recorded Sound Division of the Library of Congress
    INVENTORY TO ARCHIVAL BOXES IN THE MOTION PICTURE, BROADCASTING, AND RECORDED SOUND DIVISION OF THE LIBRARY OF CONGRESS Compiled by MBRS Staff (Last Update December 2017) Introduction The following is an inventory of film and television related paper and manuscript materials held by the Motion Picture, Broadcasting and Recorded Sound Division of the Library of Congress. Our collection of paper materials includes continuities, scripts, tie-in-books, scrapbooks, press releases, newsreel summaries, publicity notebooks, press books, lobby cards, theater programs, production notes, and much more. These items have been acquired through copyright deposit, purchased, or gifted to the division. How to Use this Inventory The inventory is organized by box number with each letter representing a specific box type. The majority of the boxes listed include content information. Please note that over the years, the content of the boxes has been described in different ways and are not consistent. The “card” column used to refer to a set of card catalogs that documented our holdings of particular paper materials: press book, posters, continuity, reviews, and other. The majority of this information has been entered into our Merged Audiovisual Information System (MAVIS) database. Boxes indicating “MAVIS” in the last column have catalog records within the new database. To locate material, use the CTRL-F function to search the document by keyword, title, or format. Paper and manuscript materials are also listed in the MAVIS database. This database is only accessible on-site in the Moving Image Research Center. If you are unable to locate a specific item in this inventory, please contact the reading room.
    [Show full text]
  • Looking After Your Tools Spade, Fork, Rake, Hoes, Trowel, Dibber, Garden
    Looking after your tools Spade, fork, rake, hoes, trowel, dibber, garden line secateurs, hosepipe and watering can, shears and slasher: What could be simpler? Clean, dry or lightly oiled, sharp, properly kept, the right ones for the job, your tools are your best laboursaving friends! Dibbers make ideal holes for your planting out, and pushed beside the plant then fill the hole and firm it in nicely. Storage Gloves can be hung up to dry with pegs on a short clothes line, boots put upside down on two short stakes or hung through a horizontal ladder. Bow- saws should be hung vertically (release the tension). Spades and forks can be hung vertically from a rack (made from an old pallet) so that they dry; sledge hammers, axes, slashers, bill hooks, pitchforks and hoes (perhaps handle downwards) can join them, or hang on the wall. Lightly oil them and protect the blades. Small tools like hammers, pliers, secateurs, trowels, hand forks, scoops, onion hoes, weed augurs etc. are best oiled and hung up - perhaps in open spring-clips screwed to a batten. It is a matter of space and opportunity. Ropes should be coiled - put a half twist in each hawser loop in the same direction as you are coiling it to prevent kinking up. Hosepipes can be coiled and hung on brackets if they do not come with their own reel. Sharpening stones: these are fragile - flat stones, cigar and canoe stones are best stored safely in boxes with padding to steady them. Flat stones need a board with end stops to hold them while in use.
    [Show full text]
  • Safe Use and Maintenance of Hand Tools
    Safe use and Maintenance of Hand Tools General Principles • Know your limits – attempting to over exert yourself or a tool are equally likely to result in injury. • The safe working distance for any tool that is swung is a minimum of two tool lengths. • When felling, the safe working distance is two tree lengths. • Better quality tools will enhance your ability to work. Poor quality tools will quickly become damaged, dangerous and frustrating to work with. • Keep the sharp edges of tools protected when in transport, to protect their cutting edges as well as your hands. An old sock, a length of rag or even a cardboard sleeve will reduce the likelihood of blades becoming chipped or dented, undoing your sharpening efforts in the process! • Do not leave tools lying about when not in use. Keep spare tools together in a tool bag or designated area and ensure no tools are left with their cutting edge uppermost (unless protected). Unsheathed bow saws must not be hung from tree branches. Lay flat on the ground • Never cut directly towards yourself, and avoid cutting into the ground. When snedding (removing side branches from a stem) you should always cut from butt to tip (excludes saws). This gives a cleaner cut and helps prolong the sharpness of a blade. See Fig 1. • All edged tools are safest when sharp. • Gloves will only enhance your ability to work if they are good quality and a good fit. Otherwise they should be avoided when using any swung tool. Chilterns Commons Project is run by the Chilterns Conservation Board and supported by the National Lottery through the Heritage Lottery Fund.
    [Show full text]