DOCSLIB.ORG

Heavy D Y Duty Mvp Wheel Seals

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Weatherly Index 310 HDAG-MVP-0103 January 1, 2003 HEAH®EAVY DUTUTY AFTERMARKET PARTS WARRANTY MVP WHEEL SEALS We warrant all Triseal/MVP Products for one year from the date of shipment to the buyer against defective material or workmanship when such parts are used on vehicles, the specifications of which have been approved by our engineering department. We do not warrant against damage caused by accident, abuse or improper installation, maintenance or repair. As the exclusive remedy under this warranty, we will at our option, repair or replace such parts free of charge, or take back the nonconforming parts and the refund monies paid by the buyer for such parts. Such parts must be found on examination to be nonconforming, and if necessary, the return charges are prepaid. MVP WHEELSEALSCatalog2003 If it is necessary to return parts under this warranty, the buyer agrees not to make any deduction on account thereof from remittances on current accounts while the claims are in the process of disposition. Any expense incurred without our consent for repairs or replacement will not be allowed. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESSED, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL THE SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. Only genuine Triseal/MVP parts are covered by this aftermarket parts warranty. Maximum Value & Performance HEAH E A V Y Y D ® The fastest growing seal manufacturer in the heavy duty industry. D UTU 11920 Price Road phone 815.648.2473 T Hebron, Illinois 60034-8811 fax 815.648.2528 Y toll free 800.910.SEAL(7325) toll free fax 800.569.2528 www.triseal.com [email protected] Maximum Value & Performance © 2003 Triseal Corporation. All rights reserved. Triseal Corporation and MVP logos are registered trademarks of Triseal Corporation. ® UNITIZED OIL BATH SEALS SEVERE SERVICE SEALS Triseal MVP® Unitized Seals are the preferred design for over-the-road applications. Triseal-MVP® Severe Service seals are the choice for difficult and harsh environments. Our seals are designed to last and allow for less than MVP seals perform well with all recognized wheel Ideal applications for MVP Severe Service seals: Multi-point internal contamination exclusion system. perfect conditions. bearing oils and greases. • Hauling sand and gravel, handling concrete, • Prevents seal lip damage. • Excellent static anti-seep capabilities for inter-modal dirt roads, mining and logging operations. applications and extended storage periods. Reinforced steel casing provides structural strength. • Added wiper ring further reduces contamination. • Robust tool impact point designed to ensure Polymer-impregnated leather is the toughest material • Design allows for less than perfect bearing adjustment. damage-free installation. used in manufacturing hub seals. • Long lasting. Our seals do not degrade with age. • Outperforms most nitrile seals in contaminated MVP seals perform well with all recognized wheel • Multi-point internal contamination exclusion system •Metal-to-metal contact promotes heat transfer away environments. to prevent seal lip damage. from seal. bearing oils and greases. • Lay-down sealing element serves as final barrier Reinforced steel casing provides structural strength. • MVP seals are designed to last–they do not degrade • Oversized outside diameter provides a secure fit. to grit. with age. • Robust tool impact point designed to ensure • Prevents seal from spinning or walking in the hub • Embeddable seal lip absorbs grit. damage-free installation. • Widest axle shoulder coverage in the industry. bore in cold conditions. • Sealing element has best low temperature capabilities • Metal-to-metal contact promotes heat transfer away • Effectively seal minor axle shoulder imperfections Large vent holes allow the lubricant to flow (–65˚F/–55˚C) of any material and great high from seal. with molded nitrile surface. around seal lip. temperature capabilities (170˚F/+77˚C). • Provide lubrication for the main seal lip for • Oversized outside diameter provides secure fit. • Withstands up to three PSI internal hub pressure longer life. Unique design severe service axle sleeve. • Prevents seal from spinning or walking in the hub build-up caused by clogged vents. • Keeps out contamination. • Assist in cooling of seal components. bore in cold conditions. • Offers excellent temperature capabilities ranging • Allows greater heat transfer away from main seal lip. from –20˚F to 225˚F (–24˚C 106˚C). MVP installation tools are easy to use and assure MVP installation tools are easy to use and assure superior installation of hub seals. • Protects seal from flying debris. superior installation of hub seals. • Protects axle shoulder from damage during Maximum Value & Performance hub removal. Maximum Value & Performance Made in the U.S.A. Made in the U.S.A. Índice de condiciones atmosféricas 310 HDAG-MVP-0103 1° de enero de 2003 GARANTÍA DE PIEZAS PARE MERCADO DE REPUESTOS Garantizamos todos los productos Triseal/MVP por un año a partir de la fecha MVP RUEDAS 2003deSELLOS PARA Catálogo de envío al comprador, contra mano de obra o material defectuoso, cuando dichas piezas se utilicen en vehículos, cuyas especificaciones se hayan aprobado por nuestro departamento de ingeniería. No garantizamos contra daños causados por accidentes, abuso o instalación, reparación o mantenimiento inadecuados. Como remedio exclusivo de esta garantía, a opción nuestra, repararemos o reemplazaremos dichas piezas sin ningún cargo, o recibiremos la devolución de las piezas a desconformidad y el dinero de reembolso pagado por el comprador por dichas piezas. Se debe determinar, bajo el análisis de tales piezas, la inconformidad y, según sea necesario, los cargos de devolución son prepagados. En caso de que sea necesario regresar las piezas bajo esta garantía, el comprador acuerda no hacer ninguna deducción en la cuenta de lo mismo de remesas en las cuentas actuales mientras las reclamaciones están en proceso de disposición. No se permitirá ningún gasto incurrido para reparaciones o reemplazos sin nuestro consentimiento. ESTA GARANTÍA ES EXPRESAMENTE EN LUGAR DE TODAS LAS DEMÁS GARANTÍAS O CONDICIONES, EXPRESAS, IMPLÍCITAS O ESTATUTARIAS, INCLUYENDO CUALQUIER GARANTÍA, COMERCIALIDAD O CAPACIDAD IMPLÍCITA PARA UN PROPÓSITO EN PARTICULAR. EN NINGÚN CASO EL VENDEDOR SERÁ RESPONSABLE DE DAÑOS INCIDENTALES O EMERGENTES DE NINGUNA NATURALEZA. Solamente piezas auténticas Triseal/MVP están cubiertas por esta garantía de piezas de posventa. El fabricante de sellos de más rápido crecimiento en la industria de equipo para trabajo pesado. UNITIZED OIL BATH SEALS INTERCHANGE TRISEAL MVP STEMCO CR NATIONAL EATON OUT- UNITIZED VOYAGER/GUARDIAN SCOTSEAL SCOTSEAL PLUS STANDARD FIVE STAR RUNNER EATON 6 Trailer Axle Seals Trailer Axle Seals Trailer Axle Seals 65060U 373–0143 46300/46305 46304 370025A 380025A 303 859 65261U 373–0113 40136 40133 370036A 380036A 301 850 65262U 373–0123 42623 42622 370065A 380065A 302 851 65298U 307–0744 43752 43753 370037A 853 Front Axle Seals Front Axle Seals Front Axle Seals 65000U 383–0153 44922 44919 370124A 855 65078U 383–0156 45103 45102 370131A 380131A 857 65092U 383–0164 43764 43763 370048A 380048A 863 65263U 383–0136 35066 35059 370001A 380001A 305 847 65291U 382–8034 36285 36282 370012A 65294U* 383–0139* 39988* 39977* 370033A* *Use with *Use with *Use with *Use with *Use with adapter 67038 adapter 310-1132 adapter 455031 adapter 455031 adapter AR12 Drive Axle Seals Drive Axle Seals Drive Axle Seals 65024U 309–0915 38750 38748 370024A 65027U 370106A 65030U 393–0148 52658 370069A 65071U 393–0104 42672 42671 370031A 380031A 852 65111U 309–0935 34387 34386 370047A 380047A 65152U∞ 393–0112 38780 38779 370023A 380023A 306 849 65156U 393–0173 47697 47695 370003A 304 861 65165U 309–0960 48000 48001 370005A 308 860 65172U 309–0964 45160 45158 370021A 307 858 65184U 43860 43861 370019A 854 65270U 309-0903 45099 45097 370022A 856 65275U 38709 370033A 65283U 309-0970 47699 370006A ∞ Use 65024U for GM application. Remove OEM seal spacer. Maximum Value & Performance For information call 800.910.(SEAL)7325 1 INDEX AXLE APPLICATIONS Page AXLE IDENTIFICATION CHART 4 TRAILER, TAG AND PUSHER AXLE 6 TRUCK DRIVE AXLE 31 TRUCK FRONT AXLE 13 HUB CAPS 107 BY BOLT CIRCLE 108 BY PART NUMBER 109 SCREW ON HUB CAPS 108 HUB CAPS INTERCHANGE 110 HUBODOMETERS 114 INTERCHANGE GUIDE 124 BY TIRE SIZE 115 SEALS DIMENSIONAL INFORMATION BY BORE DIAMETER 120 BY PART NUMBER 118 BY SHAFT DIAMETER 122 WEAR SLEEVES DIMENSIONAL INFORMATION BY PART NUMBER 126 BY SHAFT DIAMETER 128 MVP SEALS AND SEAL KITS BY BORE DIAMETER 134 BY KIT NUMBER 131 BY SHAFT DIAMETER 137 BEARING TO SEAL QUICK REFERENCE 140 INSTALLATION TOOLS 175 INSTALLATION INSTRUCTIONS 176 BY KIT NUMBER 181 BY SEAL NUMBER 178 INTERCHANGES HUB CAPS INTERCHANGE 110 HUBODOMETERS INTERCHANGE GUIDE 124 MASTER SEAL INTERCHANGE 143 SEVERE SERVICE SEALS INTERCHANGE 184 UNITIZED OIL BATH SEALS INTERCHANGE 1 For further information call or visit www.triseal.com ® © 2003 Triseal Corporation. All rights reserved. Triseal Corporation and MVP logos are registered trademarks of Triseal Corporation. Maximum Value & Performance 2 For information call 800.910.(SEAL)7325 SECTIONS Trailer, Tag & Pusher Axle Applications 1 Truck Front Axle Applications 2 Truck Drive Axle Applications 3 Hub Caps & Hub Cap Interchange 4 Hubodometers 5 Wear Sleeve & Seal Dimensional Information 6 Seal & Seal Kit Specifications 7 Bearing To Seal Quick Reference 8 Master Seal Interchange 9 Installation Tools Maximum Value & Performance 10 For information call 800.910.(SEAL)7325 AXLE IDENTIFICATION CHART Identify current design Front, Rear, Pusher, Tag and Trailer axles by the alphabetical, numerical or alpha/numeric axle codes. Refer to these codes for information on the size (capacity), type (model), brake system and modifications. Three places to find axle model information: 1) An identification tag is attached to the axle beam (housing) or the axle Model No . carrier. Example pictured right. Customer No . 2) On the rear of the axle beam (housing) or the axle carrier there is a stamping.
Recommended publications
  • Clips & Test Leads

    Clips & Test Leads

    5A Alligator Clip Kits, 72−123 Series Features w 5 Amp Nickel Plated Miniature Alligator Clip w Flexible PVC Composition Insulator NTE Type No. Kit Contains 72−123−KIT1 1 Pair of 72-123 Nickel Plated Mini Alligator Clips 1 Pair of 72−128−0 Black Insulators 72−123−KIT2 1 Pair of 72-123 Nickel Plated Mini Alligator Clips 1 Pair of 72−128−2 Red Insulators 72−123−KIT3 1 Pair of 72-123 Nickel Plated Mini Alligator Clips 1 Each of 72-128-0 (Black) and 72-128-2 (Red) Insulators 5A Alligator Clip Kits, 72−124 Series Features w 5 Amp Steel Miniature Alligator Clip with Barrel w Flexible PVC Composition Insulator NTE Type No. Kit Contains 72−124−KIT 4 Pcs of 72-124 Mini Steel Alligator Clips w/Barrel 2 Each of 72-127-0 (Black) and 72-127-2 (Red) Insulators 72−124−KIT1 1 Pair of 72-124 Mini Steel Alligator Clips w/Barrel 1 Pair of 72−127−0 Black Insulators 72−124−KIT2 1 Pair of 72-124 Mini Steel Alligator Clips w/Barrel 1 Pair of 72−127−2 Red Insulators 72−124−KIT3 1 Pair of 72-124 Mini Steel Alligator Clips w/Barrel 1 Each of 72-127-0 (Black) and 72-127-2 (Red) Insulators 5A Alligator Clip Kits, 72−125 Series Features w 5 Amp Solid Copper Miniature Alligator Clip w Flexible PVC Composition Insulator NTE Type No. Kit Contains 72−125−KIT1 1 Pair of 72-125 Solid Copper Mini Alligator Clips 1 Pair of 72−128−0 Black Insulators 72−125−KIT2 1 Pair of 72-125 Solid Copper Mini Alligator Clips 1 Pair of 72−128−2 Red Insulators 72−125−KIT3 1 Pair of 72-125 Solid Copper Mini Alligator Clips 1 Each of 72-128-0 (Black) and 72-128-2 (Red) Insulators 5A Alligator Clip Kit, 72−129 Series Features w 5 Amp Toothless Steel Alligator Clip w Flexible PVC Composition Insulator NTE Type No.
  • Open Sound Data Catalog Created on 2021/04/17 19:22:02

    Open Sound Data Catalog Created on 2021/04/17 19:22:02

    Open Sound Data Catalog https://desktopstation.net/sounds/ Created on 2021/04/17 19:22:02 This catalog introduces a list of locomotives and sound data available on Open Sound Data, a project for distributing Japanese-style sound data for digital model railroads (DCC). Use of the data is free of charge, but compliance with the terms and conditions is required. Please refer to the Open Sound Data website for more information. Old Kokuden Type nose suspension drive Provided by MB3110A@zhengdao_X The sound of a suspended motor is something that we cannot hear around us anymore. The ESU sound decoder fulfilled my wish that the nostalgic sound of the suspension motor would remain in service forever. The sound source is based on the running sound of Tobu 3050 series, and various operation sounds such as old auxiliary equipment are added to make it highly versatile. The sound source is based on the running sound of Tobu 3050 series. This data can be used with the LokSound V4 series and LokSound 5 series, but the LokSound V4 rescue version has some limitations in sound quality and functions. URL https://desktopstation.net/sounds/osd2.html Kiha 40 series diesel car Provided by MB3110A@zhengdao_X, Tochigi General Rolling Stock Office This is the sound of the DMF15HSA internal combustion engine (original engine) used in the Kiha40 series. I wanted to preserve the sound of the original engine in a model, so I combined the sound recorded by MB3110A with my own sound. I would be happy if you could run it with the diesel sound.
  • General Hardware

    General Hardware

    General Hardware pdqlocks.com Table of Contents WALL STOPS, DOOR STOPS, FLOOR STOPS....................................................................................................... 2-8 KICK DOWN STOPS ........................................................................................................................................................... 8 HINGE STOPS .......................................................................................................................................................................9 ROLLER STOPS ....................................................................................................................................................................9 ROLLER LATCHES ............................................................................................................................................................ 10 BALL CATCHES .................................................................................................................................................................. 11 DOOR GUARDS .................................................................................................................................................................. 11 PRIVACY DOOR LATCH .................................................................................................................................................. 11 LATCH PROTECTORS....................................................................................................................................................
  • Thermostatic Radiator Valves CALEFFI 220 Series 01034/15 GB ACCREDITED Replaces 01034/05 GB ISO 9001 FM 21654

    Thermostatic Radiator Valves CALEFFI 220 Series 01034/15 GB ACCREDITED Replaces 01034/05 GB ISO 9001 FM 21654

    Depl. 01034-15_Depl. 01034-05 01/04/15 16:25 Pagina 1 Thermostatic radiator valves CALEFFI 220 series 01034/15 GB ACCREDITED replaces 01034/05 GB ISO 9001 FM 21654 Function Thermostatic radiator valves are typically used for regulating the medium flow to the radiators of heating systems. When combined to a thermostatic or thermo-electric control head, they keep the ambient temperature of the room where they are installed constant at the set value. This prevents unwanted temperature rises and achieves considerable energy savings. These valves have a special tailpiece with rubber hydraulic seal, permitting quick, safe connection to the radiator without the use of additional sealing materials. 028 Product range VALVES: For steel pipes: 220 series Angled thermostatic radiator valve for steel pipe sizes 3/8”, 1/2”, 3/4” (*) 221 series Straight thermostatic radiator valve for steel pipe sizes 3/8”, 1/2”, 3/4” (*) 224 series Reverse thermostatic radiator valve for steel pipe sizes 3/8”, 1/2” 225 series Double-angled thermostatic radiator valve for steel pipe sizes 3/8” and 1/2” RH version, 3/8” and 1/2” LH version 225 series Double-angled lockshield valve for steel pipe sizes 3/8” and 1/2” RH version, 3/8” and 1/2” LH version For plastic and copper pipes: 222 series Angled thermostatic radiator valve for copper pipe sizes 3/8”, 1/2” radiator x 23 p.1,5 piping 223 series Straight thermostatic radiator valve for copper pipe sizes 3/8”, 1/2” radiator x 23 p.1,5 piping 226 series Double angled thermostatic radiator valve for copper pipe sizes 1/2”
  • Appendix XII Ball Wills Proved in the Consistory Court of Lichfield (And

    Appendix XII Ball Wills Proved in the Consistory Court of Lichfield (And

    Appendix XII Ball wills proved in the Consistory Court of Lichfield (and administrations) 1516-1652 Part A Phillimore, W.P.W. (ed.), 'Calendars of Wills and Administrations in the Consistory Court of the Bishop of Lichfield and Coventry, 1516-1652' Index Library, British Record Society, Vol. 7, London, 1892 Series I 1516-1526 Series II 1528-1540 Series III 1526-1561 Series IV 1562-1624 Series V 1624-1652 (1) Alphabetical Index [____] Ball (1) Page 9 Series III 1533 [____] Ball (2) Page 9 Series III 1534 [____] Ball (3) Page 9 Series III 1535 [____] Ball Page 10 Series III 1537 Anne, ad. Page 159 Series IV 144 1610 Anne, ad. Page 162 Series IV 176 1616 Annis Page 19 Series III 130 1558 Anthony Page 167 Series IV 152 1622 Brian Coventry Page 411 Series V 1638 Edward Page 21 Series III 168 1559 Edward, ad. Page 148 Series IV 128 1594 Edward Page 157 Series IV 41 1608 Edward Uttoxeter Page 416 Series V 1647 Francis Page 167 Series IV 95 1621 Francis Tillington Page 417 Series V 1649 George Page 152 Series IV 252 1599 Henry Page 14 Series III 74 1548 Henry Page 149 Series IV 122 1594 Hugh Page 13 Series III 49 1546 Humphrey, ad. Page 160 Series IV 194 1612 Isabel Page 407 Series V 1631 James Page 15 Series III 21 1551 James Page 140 Series IV 126 1578 James, ad. Page 148 Series IV 92 1593 James Page 159 Series IV 185 1612 James, ad. Page 165 Series IV 300 1618 James Wirksworth Page 413 Series V 1640 Joane Page 15 Series III 21 1551 Joan, ad.

  • T-100 Series, Bowl Welded to Table, 21"" Wide X 16"" T-101 Series

    T-100 Series, Bowl Welded To Table, 21"" wide x 16"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 16 21 T-100 $895.00 0 T-101 Series, Bowl Welded To Table, 21"" wide x 16"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 16 21 T-101 $1061.00 0 T-102 Series, Bowl Welded To Table, 20"" wide x 20"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 20 20 T-102 $937.00 0 T-103 Series, Bowl Welded To Table, 20"" wide x 20"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 20 20 T-103 $1116.00 0 T-104 Series, Bowl Welded To Table, 24"" wide x 24"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 24 24 T-104 $1438.00 0 T-105 Series, Bowl Welded To Table, 20"" wide x 30"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 30 20 T-105 $1524.00 0 T-106 Series, Bowl Welded To Table, 10"" wide x 14"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 14 10 T-106 $805.00 0 T-107 Series, Bowl Welded To Table, 10"" wide x 14"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 14 10 T-107 $853.00 0 T-108 Series, Bowl Welded To Table, 12"" wide x 20"" Unit Model Numbers Ship Width Length Model List Price Wt. (lbs) 20 12 T-108 $963.00 0 T-109 Series, Bowl Welded To Table, 14"" wide x 16"" Unit Model Numbers Ship Width Length Model List Price Wt.
  • Electronic Product Selection Guide

    Electronic Product Selection Guide

    Circuit Protection Specialists World Headquarters Littelfuse, Inc. 800 E. Northwest Highway Des Plaines, IL 60016, USA www.littelfuse.com International Sales, Distribution and Engineering Facilities: North America Central and South America • Des Plaines, Illinois USA • São Paulo, Brasil Technical Assistance and Phone: (+55) 11-877-0909 Phone: (800) 999-9445 Fax: (+55) 11-876-6690 (847) 824-1188 Fax: (847) 391-0459 Research and Europe Manufacturing Facilities: • Utrecht,The Netherlands Phone: (+31) 30-299-9900 • Arcola, Illinois USA Fax: (+31) 30-299-9800 • Centralia, Illinois USA • Washington, England • Des Plaines, Illinois USA Phone: (+44) 191-415-8181 • Dundalk, Ireland Fax: (+44) 191-415-8189 • Grenchen, Switzerland Asia/Pacific • Malvar, Philippines • Piedras Negras, Mexico • Singapore • Suzhou, China Phone: (+65) 6746-9666 • Swindon, England Fax: (+65) 6742-8178 • Washington, England • Taipei,Taiwan R.O.C. Phone: 886-2-8751-1234 Fax: 886-2-8751-1177 • Yokohama, Japan Phone: (+81) 45-478-1088 Fax: (+81) 45-478-1089 • Hong Kong, China Phone: (+85) 22-810-5099 Fax: (+85) 22-810-5500 • Seoul, Korea Phone: (+82) 2-463-6073 Fax: (+82) 2-463-3273 • Shanghai, China Phone: (86-21) 5383-8016 (86-21) 5383-9568 Fax: (86-21) 5383-7476 • Shenzhen, China Phone: (86-755) 299-1548 Fax: (86-755) 299-2040 FORM NO. EC102-A © 2002, Littelfuse Inc. Printed in U.S.A. Electronic Product Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Selection Guide TABLE OF CONTENTS Description Page Number Introduction . .1 Table of Contents .
  • Data Collection Survey on Maintenance on Rolling-Stock in the Republic of the Union of Myanmar

    Data Collection Survey on Maintenance on Rolling-Stock in the Republic of the Union of Myanmar

    Myanma Railways, Ministry of Transport and Communications, The Republic of the Union of Myanmar Data Collection Survey on Maintenance on Rolling-Stock in the Republic of the Union of Myanmar Final Report November 2016 Japan International Cooperation Agency (JICA) Japan International Consultants for Transportation Co., Ltd. 1R JR 16-055 Contents 0 Purpose of this survey ....................................................................................................................... 1 1 Rolling stock plan .............................................................................................................................. 2 1.1 Policies, measures and existing programs for the rolling stock plan of Myanma Railways ......................2 1.1.1 Rolling stock of Myanma Railways ....................................................................................................2 1.1.2 Policies for the rolling stock plan of Myanma Railways .....................................................................4 1.1.3 Measures and existing programs for the rolling stock plan of Myanma Railways ..............................5 1.2 Setup for the implementation of Myanma Railways’ rolling stock plan ....................................................7 1.3 Summary of issues on the rolling stock plan and study of proposed improvements ................................ 11 1.3.1 Summary of issues on the procurement policy as part of the rolling stock plan and on the consistency with the long-term plan ..........................................................................................................
  • Fact Sheets 2013 Year Ended March 31, 2013 Hokuriku Shinkansen

    Fact Sheets 2013 Year Ended March 31, 2013 Hokuriku Shinkansen

    Fact Sheets 2013 Year ended March 31, 2013 Hokuriku Shinkansen CONTETS Corporate Overview Data 1-2 JR-West’s Corporate Profile, Service Area, 13 Uses of Cash Flows Revenue Composition Capital Expenditures/Dividends 3 Main Group Companies 14 Uses of Cash Flows Long-Term Debt and Payables 4 JR-West Group Medium-Term Management Plan 2017 15 Employees Operating Environment 5 Operating Area Population and Gross Production 16 Management Indicators 6 Demand from Inbound Travel 17 Consolidated Financial Data 7 Airport and Expressway Networks 18 Non-Consolidated Financial Data Businesses 19 Transportation Revenues 8 Sanyo Shinkansen Line/Shinkansen versus Airlines 20 Transportation Data 9 Development of New Shinkansen Lines Other (Hokuriku Shinkansen Line) 21 Outline of Government’s Regulations on Railway Fares and Charges WEST JAPAN RAILWAY COMPANY 10 Kansai Urban Area (Kyoto-Osaka-Kobe Area) 11 Non-Transportation Operations 22 Environmental Initiatives http://www.westjr.co.jp/global/en/ir/ 12 Development of Kansai Urban Area WEST JAPAN RAILWAY COMPANY CORPORATE OPERATING CONTENTS OVERVIEW ENVIRONMENT BUSINESSES DATA OTHER Corporate Overview JR-West’s Corporate Profile, Service Area, Revenue Composition 札幌 ■ CORPORATE PROFILE (AS OF MARCH 31, 2013) ■ REVENUE COMPOSITION (FY ENDED MARCH 31, 2013) Date of establishment: April 1, 1987 Common stock: ¥100 billion OPERATING REVENUES Shares outstanding: 198,256,600 (REVENUES FROM THIRD PARTIES) Employees: 26,889 (non-consolidated) 9.9% 7.0% Transportation .......... ¥844.9 billion 45,326 (consolidated) • Boundary Stations between JR-West and Other JR Companies Omishiotsu Number of subsidiaries: 143 ( incl. 64 consolidated Total • Sales of Goods and Food Services .......... ¥234.6 billion Shinkansen Line (Bullet Train) subsidiaries) ¥1,298.9 • Real Estate ................
  • Bore Gage Applications and Precision Measuring Solutions High

    Bore Gage Applications and Precision Measuring Solutions High

    GAGES Bore Gage Applications and A. A. Precision Measuring Solutions High Accuracy Bore Gages SECTION PRECISION BORE A TABLE OF CONTENTS Application Series Page Dyer’s Experience, Gage R & R ALL A.2–A.3 Indicating Plug, No Tipping 240 A.4–A.13 Indicating Plug, Special Sleeves 240 A.14–A.19 Twin Cross®, Large Diameter 440 A.20–A.21 Single Cross, Large Shallow Diameters 441 A.22–A.23 Keyways, Slots, Parallel Surfaces 430–439 A.24–A.25 Hub Obstruction in Bore Diameters 282 A.26–A.27 Indicating Rings, Short Hub OD’s 283 A.28–A.29 Deep Reach, Size Changeable Diameters 630 A.30–A.31 No Tipping, Size Changeable 830 A.32–A.33 Pitch Diameter, Gears and Splines 290 A.34 Split Ball, Very Small Diameters 200 A.35–A.39 Blind and Stepped Diameters 271 A.40 Boring Bar, Measure Around 280 A.41 Standard Handle 220 A.42–A.43 Component Sets 223 A.44–A.45 Short Handle 222 A.46 Jig Grinding, 90º Angle 270 A.47 Long Handle, Reach to 118" (3000 mm) 225 A.48 Long Handle, Reach to 118" (3000 mm) Carbon Fiber 226 A.49 Spherical Diameters 230 A.50 Large Shallow Diameters, In Line Electronics 136 A.51 Recessed Bores, Retractable Contacts 261–267 A.52–A.53 Custom Markings and Storage Cases 308 A.54 The Dyer Company ~ phone: 717.569.3223 ~ gage hotline: 800.631.3333 ~ fax: 717.569.6721 ~ www.dyergage.com ~ e-mail: [email protected] A.1 GAGE R & R CAPABILITY, A FUNDAMENTAL QUALITY PRACTICE Dyer guarantees a ≤10% Gage R & R The best gage for the job, more gage Dyer knows Gage R & R – We add with all our bore gages.