Application to determine if prior approval is required for a proposed: Erection, Extension or Alteration of a Building for Agricultural or Forestry use.

The Town and Country Planning (General Permitted Development) () Order 2015 (as amended) - Schedule 2, Part 6

Publication of applications on planning authority websites. Please note that the information provided on this application form and in supporting documents may be published on the Authority’s website. If you require any further clarification, please contact the Authority’s planning department.

1. Site Address

Number

Suffix

Property name WIGG Spout Farm

Address line 1 Land off Clee Stanton Road

Address line 2

Address line 3

Town/city Bitterley

Postcode SY83HH

Description of site location must be completed if postcode is not known:

Easting (x) 356465

Northing (y) 277563

Description

Land at the end of the lane leading to 'The Lanzes'. Land to the East of this property.

2. Applicant Details

Title Mr

First name Graham

Surname Aylen

Company name

Address line 1 Whitton Brink

Address line 2 Knowbury

Address line 3

Planning Portal Reference: PP-09497138 2. Applicant Details

Town/city

Country

Postcode SY8 3LE

Are you an agent acting on behalf of the applicant? Yes No

Primary number

Secondary number

Fax number

Email address

3. Agent Details No Agent details were submitted for this application

4. The Proposed Building

Please indicate which of the following are involved in your proposal A new building An extension An alteration

Please describe the type of building

Replacement and extension to existing derelict agricultural store. The replacement building will be steel framed hot dipped galvanised steel to BS EN 10346:2009 Fe E390G-Z275. Sections designed to BS EN 1993-1-3:2006. The frame will be made from cold rolled cee-section columns and rafters. All purlins to be top hat sections. Wall to be 24 mm box profile wall cladding. Plastisol covered sheeting. The roof will be 30mm box profile cladding Plastisol covered sheeting with anti-condensation barrier and 10% skylights. The doors will be 2 off 2700 x 2600mm with a single personnel access door and single 1000 x 1000 mm white uPVC window in east facing gable end. General suggested colour - Olive or Juniper green (12B27 / 12B29). Building to be fitted with guttering and downpipes of Plastisol coated hot dipped galvanised steel matching colour to walls and roof to water butts. Please state the dimensions of the building

Length - metres 14.00

Height to eaves - 3.20 metres Breadth - metres 7.00

Height to ridge - 3.82 metres Please describe the walls and the roof materials and colours

Walls - Materials

Wall to be 24 mm box profile wall cladding. Plastisol covered sheeting.

Walls - External colour

Olive or Juniper green (12B27 / 12B29

Roof - Materials

30mm box profile cladding Plastisol covered sheeting with anti-condensation barrier and 10% skylights coverage. Matching Plastisol covered galvanised steel rainwater goods.

Roof - External colour

Olive or Juniper green (12B27 / 12B29

Has an agricultural building been constructed on this unit within the last two years? Yes No

Would the proposed building be used to house livestock, slurry or sewage sludge? Yes No

Planning Portal Reference: PP-09497138 4. The Proposed Building

Would the ground area covered by the proposed agricultural building exceed 1000 square metres? Yes No Please note: If the ground area covered exceeds 1000 square metres it will not qualify as Permitted Development and an application for Planning Permission will be required.

Has any building, works, pond, plant/machinery, or fishtank been er