Owner's Manual

DEAR VOLVO OWNER

THANK YOU FOR CHOOSING VOLVO

We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of you and your passengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to satisfy all current safety and environmental requirements. In order to increase your enjoyment of the car, we recommend that you familiarise yourself with the equipment, instructions and maintenance information contained in this owner’s manual. Contents

00 Introduction 01 Safety 02 Locks and alarm Important information ...... 6 Safety in the passenger compartment...... 12 Remote control key/key ...... 34 Environment ...... 8 Safety mode...... 25 Keyless drive...... 40 Child safety ...... 26 Locks ...... 42 Alarm* ...... 45

2 Contents

03 Your driving environment 04 Comfort and driving pleasure 05 During your journey Instruments and controls...... 50 Menus and messages ...... 94 Recommendations during driving ...... 152 Ignition positions ...... 59 Climate control ...... 99 Refuelling...... 155 Seats ...... 60 Audio system...... 109 Fuel...... 156 Steering wheel...... 63 Trip computer ...... 118 Loading ...... 158 Lighting...... 64 Compass*...... 119 Driving with a trailer...... 162 Wipers and washing ...... 73 Stability and traction control system...... 120 Towing ...... 168 Windows, rearview and door mirrors...... 75 Adapting driving characteristics...... 121 Power sunroof* ...... 79 Cruise control* ...... 122 Starting the engine ...... 81 Adaptive cruise control* ...... 123 Gearboxes ...... 84 Collision warning system with Foot brake ...... 87 brake support*...... 127 Parking brake...... 89 Parking assistance* ...... 130 Blind Spot Information System, BLIS* ..... 132 Comfort inside the passenger compartment ...... 135 Bluetooth handsfree*...... 140 Built-in phone*...... 145

3 Contents

06 Maintenance and 07 Alphabetical index specifications Engine compartment ...... 172 Lamps ...... 177 Wiper blades and washer fluid...... 184 Battery...... 186 Fuses...... 189 Wheels and tyres...... 194 Car care...... 210 Type designations ...... 214 Specifications ...... 215

4 5 Introduction

Important information

Reading the Owner’s Manual Option page or directly adjacent to a table. This in- Certain functionality and equipment can be formation is an addition to the text that it re- Introduction purchased as options when a new car is or- fers to via a number. dered. The range of options may apply to all A good way of getting to know your new car Message texts cars or sometimes only to certain variants is to read the owner’s manual, ideally before There are displays in the car that show text and/or certain markets. All types of options your first journey. This will give you the op- messages. These text messages are high- are marked with an asterisk * in the Owner’s portunity to familiarise yourself with new lighted in the Owner’s Manual by means of Manual. functions, to see how best to handle the car the text being slightly larger and printed in in different situations, and to make the best Contact your Volvo dealer for more informa- grey. Example DIM text. use of all the car’s features. Please pay at- tion. tention to the safety instructions contained in Procedure lists the manual. Special texts Procedures where action must be taken in a certain sequence are numbered in the Own- The equipment described in the owner’s WARNING er’s Manual. manual is not present in all models. In addition to standard equipment, this manual also Texts marked with WARNING advise of risk When there is a series of illustrations for of personal injury. describes options (factory fitted equipment) step-by-step instructions each step is numbered in the same way as the corre- and certain accessories (extra equipment). sponding illustration. IMPORTANT Volvo cars are adapted for the varying re- There are numbered and unnumbered quirements of different markets, as well as Texts marked with IMPORTANT advise of arrows which are used to illustrate a for national or local legal requirements and risk of material damage. movement or to point out a component. regulations. If there is no series of illustrations for step- The specifications, design features and illus- NOTE by-step instructions then the different steps trations in this owner’s manual are not bind- are numbered with normal numbers. Texts marked with NOTE give advice or tips ing. We reserve the right to make modifica- that facilitate use of features and functions Position lists tions without prior notice. for example. Red circles containing a number are used © Volvo Car Corporation in overview images where different com- Footnote ponents are pointed out. The number There is footnote information in the Owner’s recurs in the position list featured in Manual that is located at the bottom of the connection with the illustration that describes the item.

6 Introduction

Important information

Step lists Recording data Accessories and extra equipment A list of steps is used when there is a num- One or more of the computers in your Volvo The incorrect connection and installation of bered sequence in the Owner’s Manual. are capable of recording detailed informa- accessories can negatively affect the car’s Example: tion. This information is intended for use in electrical system. Certain accessories only • Coolant research to enhance safety and for diagnos- function when their associated software is in- •Engine oil ing faults in some of the in-car systems. The stalled in the car’s computer system. Always data may include details regarding seatbelt contact an authorised Volvo workshop be- use by the driver and passengers, the func- fore installing accessories which are con- tions of various vehicle systems and mod- nected to or affect the electrical system. ules, and status information about the engine, throttle, steering, brakes and other systems. This data can also include details of the way the car is driven. This type of information can include, without being limited to, specific details such as vehicle speed, the use of the brake and accelerator pedals and steering wheel position. This latter type of data can be stored for a limited period while the car is being driven and subsequently during a collision or a near-collision. Volvo Car Corporation will not disclose the stored information without consent. However, Volvo Car Corporation may be forced to disclose the information due to national legislation. Volvo Car Corporation and its authorised workshops may also read and use the information.

7 Introduction

Environment

Volvo Cars’ environmental philosophy der the heading, Reducing environmental The entry of nitrous oxides, ground-level impact below. ozone and hydrocarbons is prevented by the Environmental care, safety and quality are carbon filter. the three core values which influence all op- Efficient emission control erations of the Volvo Car Corporation. We Your Volvo is manufactured following the Textile standard also believe that our customers share our concept "Clean inside and out" – a concept The interior of a Volvo is designed to be consideration for the environment. that encompasses a clean interior environ- pleasant and comfortable, even for people Your Volvo complies with strict international ment as well as highly efficient emission con- with contact allergies and for asthma suffer- environmental standards and is also manu- trol. In many cases the exhaust emissions are ers. Extreme attention has been given to factured in one of the cleanest and most re- well below the applicable standards. choosing environmentally-compatible mate- source-efficient plants in the world. Volvo rials. This means that they also fulfil the re- Car Corporation has global certification to Clean air in the passenger quirements in the Öko-Tex 100 standard1, a the ISO 14001 environmental standard. This compartment major advance towards a healthier passen- standard supports the work within the area of A passenger compartment filter prevents ger compartment environment. the environment. dust and pollen from entering the passenger Öko-Tex certification covers seatbelts, car- EPI (Environmental Product Information) is compartment via the air intake. pets, thread and fabrics for example. The supplied for all Volvo models. There you can A sophisticated air quality system, IAQS* (In- leather in the upholstery undergoes chromi- see how the car’s lifecycle affects the envi- terior Air Quality System) ensures that the in- um-free tanning with natural plant substanc- ronment. coming air is cleaner than the air in the traffic es and fulfils the certification requirements. Read more at www.volvocars.com/EPI outside. Volvo workshops and the environment The system consists of an electronic sensor Regular maintenance creates the conditions Fuel consumption and a carbon filter. The incoming air is moni- for long service life for the car and low fuel Volvo cars have competitive fuel consump- tored continuously and if there is an increase consumption, and this way you contribute to tion in each of their respective classes. Low- in the level of certain unhealthy gases such a cleaner environment. When Volvo’s work- er fuel consumption generally results in lower as carbon monoxide then the air intake is shops are entrusted with the repair and emission of the greenhouse gas, carbon di- closed. Such a situation may arise in heavy maintenance of the car, it becomes part of oxide. traffic, queues and tunnels for example. our system. We make clear demands regard- It is possible for the driver to influence fuel ing the way in which our workshops are de- consumption. For more information read un- 1 More information on www.oekotex.com

8 Introduction

Environment signed in order to prevent spills and dis- • Use engine braking to slow down. charges into the environment. Our workshop • Avoid idling. Take consideration of local staff have the knowledge and the tools re- regulations. Switch off the engine in longer quired to guarantee good environmental stationary traffic. care. • Always dispose of environmentally hazardous waste, such as batteries and oils, Reducing environmental impact in an environmentally safe manner. If un- You can help reduce environmental impact, certain about disposal, consult an author- for example, by driving economically, by pur- ised Volvo workshop for advice. chasing eco-labelled car care products and • Service your car regularly. by servicing and maintaining the car accord- • High speed increases consumption con- ing to the instructions in the owner’s manual. siderably due to increased wind resist- The following hints will help you to care for ance. A doubling of speed increases wind the environment: resistance four times. These hints will help reduce fuel consump- • Decrease fuel consumption by choosing tion without increasing travel time or lessen- ECO tyre pressure, see page 207. ing the enjoyment of driving. Apart from be- • A roof load and ski box increase air resist- ing kind to your car, you’ll be saving money - ance, leading to higher fuel consumption. and the Earth’s resources. Remove them immediately after use. • Remove unnecessary items from the car. The greater the load the higher the fuel consumption. • If the car is equipped with an engine block heater use it for a few hours before starting from cold. This reduces fuel consumption and exhaust emissions. • Drive gently and avoid braking too hard. • Drive in the highest gear possible. Low engine speeds result in lower fuel consumption.

9 Safety in the passenger compartment...... 12 Safety mode...... 25 Child safety ...... 26

10 SAFETY 01 01 Safety

01 Safety in the passenger compartment

Always use seatbelts Releasing the seatbelt WARNING Press the red lock button and then let the seatbelt retract. If the seatbelt does not re- Never modify or repair the seatbelts your- tract fully, feed the seatbelt in by hand so self. Contact an authorised Volvo workshop. that it does not hang loose. If a seatbelt has been subjected to a major The seatbelt locks and cannot be withdrawn: load, such as in conjunction with a collision, the entire seatbelt must be replaced. Some • if it is pulled out too quickly. of the protective characteristics of the seat- • during braking and acceleration. belt may have been lost, even if it appears • if the car leans heavily. to be undamaged. In addition, replace the seatbelt if the belt is worn or damaged. The new seatbelt must be type-approved and Keep in mind the following: intended for installation in the same position 8803512j • do not use clips or anything else that can as the replaced seatbelt. Heavy braking can have serious conse- prevent the seatbelt from fitting properly. quences if the seatbelts are not used. Ensure • ensure that the seatbelt is not twisted or WARNING that all passengers use their seatbelts. caught on anything. Each seatbelt is designed for only one per- • the hip strap must be positioned low down It is important that the seatbelt lies against son. (not over the abdomen). the body so it can provide maximum protection. Do not lean the backrest too far back. • tension the hip strap over the lap by The seatbelt is designed to protect in a nor- pulling the diagonal shoulder belt as illustrated. mal seating position.

Putting on a seatbelt WARNING Pull the seatbelt out slowly and secure it by The seatbelts and airbags interact. If a seat- pressing the buckle into the lock. A loud belt is not used or is used incorrectly, this "click" indicates that the seatbelt has locked. may diminish the protection provided by the airbag in the event of a collision. The buckles only fit the intended lock in the rear seat1.

1 Certain markets

12 01 Safety

Safety in the passenger compartment 01

Seatbelts and pregnancy pedals and steering wheel). Within this con- Seatbelt reminder1 text, they should strive to position the seat with as large a distance as possible between the abdomen and the steering wheel. 8704370s 3905547s

The seatbelt should always be worn during An audio signal and indicator lamp remind pregnancy. But it is crucial that it be worn in anyone not wearing a seatbelt to use one. the correct way. The diagonal section should The audio reminder is speed-dependent. Re- wrap over the shoulder then be routed be- minder indicator lamps are located in the roof tween the breasts and to the side of the ab- console and combined instrument panel. At domen. The lap section should lay flat over low speed, the audio reminder will sound for the thighs and as low as possible under the the first 6 seconds. abdomen. – It must never be allowed to ride Child seats are not covered by the seatbelt upward. Remove all slack from the seatbelt reminder system. and ensure that it fits close to the body. In addition, check that there are no twists in the Rear seat seatbelt. The seatbelt reminder in the rear seat has As the pregnancy progresses, pregnant driv- two subfunctions: ers should adjust their seats and steering • Provides information on which seatbelts wheel such that they can easily maintain con- are being used in the rear seat. This is trol of the vehicle as they drive (which means shown on the information display. The they must be able to easily operate the foot 1 Certain markets

13 01 Safety

01 Safety in the passenger compartment

message is automatically cleared after ap- Seatbelt tensioner Warning symbol on the combined prox. 30 seconds or can be acknowl- All the seatbelts are equipped with belt ten- instrument panel edged manually by pressing the READ sioners. A mechanism in the belt tensioner button. tightens the seatbelt around in the event of a • Provides a warning if one of the rear sufficiently forceful collision. This provides seatbelts is unfastened during travel. This more effective restraint by the seatbelt for warning takes the form of a message on the information display along with the passengers. audio/visual signal. The warning ceases 0 1 when the seatbelt is re-fastened or can be o acknowledged manually by pressing the READ button. The message on the information display showing which seatbelts are in use is always 3801180s available. Press the READ button to see stored messages. The airbag system is continually monitored by the system control module. The warning Certain markets symbol on the combined instrument panel il- An audio signal and indicator lamp remind luminates in ignition position II or III. The the driver if not wearing a seatbelt to use one. symbol goes out after approx. 6 seconds At low speed, the audio reminder will sound provided the airbag system is fault-free. for the first 6 seconds. WARNING If the warning symbol for the airbag system remains on or illuminates while driving, it means that the airbag system is not functioning fully. The symbol indicates a fault in the seatbelt buckle, SIPS, IC system or other fault in the SRS system. Contact an authorised Volvo workshop urgently.

14 01 Safety

Safety in the passenger compartment 01

As well as the warning symbol, a message Driver airbag Front passenger airbag may appear on the information display in some cases. If the warning symbol malfunctions, the warning triangle illuminates and the message SRS Airbag Service required or SRS Airbag Service urgent appears in the information display. Contact an authorised Volvo workshop immediately. 8803516j 8803515j

The car has an SRS airbag (Supplemental The car has an SRS airbag (Supplemental Restraint System) in the steering wheel to Restraint System) to supplement the protec- supplement the protection afforded by the tion afforded by the seatbelt. The passenger seatbelt. This airbag is fitted into the centre airbag is fitted and stowed above the glove- of the steering wheel. The steering wheel is box. This panel is marked SRS AIRBAG. marked SRS AIRBAG. WARNING WARNING To minimise the risk of injury if the airbag The seatbelts and airbags interact. If a seat- deploys, passengers must sit as upright as belt is not used or is used incorrectly, this possible with their feet on the floor and may diminish the protection provided by the backs against the backrest. Seatbelts must airbag in the event of a collision. be secured.

WARNING Do not put objects in front of or above the dashboard where the passenger airbag is located.

15 01 Safety

01 Safety in the passenger compartment

SRS system WARNING Never place a child in a child seat or on a booster cushion in the front seat if the airbag (SRS) is activated. Never allow a child to stand or sit in front of the front passenger seat. No one shorter than 140 cm should ever sit in the front passenger seat if the airbag (SRS) is activated. Failure to follow the advice given above can endanger the life of the child. 8803560s 8803417d Location, left-hand drive Left-hand drive 8803561s 8803418d Location, right-hand drive Right-hand drive The system consists of airbags and sensors. A sufficiently violent collision trips the sensors and the airbag(s) are inflated with hot

16 01 Safety

Safety in the passenger compartment 01 gas. To cushion the impact, the airbag de- Activating/deactivating the airbag shape similar to a key can also be used.) Fail- flates when compressed. When this occurs, (SRS)* ure to follow the advice given above can en- smoke escapes into the car. This is com- danger life. pletely normal. The entire process, including inflation and deflation of the airbag, occurs WARNING within tenths of a second. If the car is equipped with a front passenger airbag (SRS), but does not have PACOS IMPORTANT (Passenger Airbag Cut Off Switch), the airbag will always be activated. Repairs must only be performed by an authorised Volvo workshop. Work on the SRS system can cause malfunction and result in WARNING serious personal injury. Activated airbag (passenger seat):

3905550s Never place a child in a child seat or on a NOTE Indication in roof console booster cushion on the front passenger seat when the airbag is activated. This ap- The sensors react differently depending on The airbag (SRS) for the front passenger seat plies to everyone shorter than 140 cm. the course of the collision and whether or can be deactivated. This is necessary if a Deactivated airbag (passenger seat): No not the seatbelts on the driver and passen- child seat is to be fitted there for example. one taller than 140 cm should ever sit in the ger side are used. It is therefore possible front passenger seat when the airbag is de- that only one (or none) of the airbags may A text message on the roof panel indicates activated. inflate in a collision. The SRS system sens- that the passenger airbag (SRS) is deactivates the force of the collision on the car and ed. adapts accordingly so that one or more airbags are deployed. The capacity of the airbags is also adapted to the collision force to Activating/deactivating which the vehicle is subjected. The switch is located on the passenger end of the dashboard and is accessible when the passenger door is open. Check that the switch is in the required position. Volvo recommends that the key blade be used to change position. For information on the key blade, see page 37. (Other items with a

17 01 Safety

01 Safety in the passenger compartment

Switch position Side airbags SIPS bags A large proportion of the collision force is WARNING transferred by the SIPS (Side Impact Protec- Do not allow anyone to sit in the front pas- tion System) to beams, pillars, the floor, the senger seat if the text message in the roof roof and other structural parts of the body. panel indicates that the airbag (SRS) is de- The side airbags at the driver’s and front pas- activated and if the warning symbol for the senger seats protect the chest area and the airbag system is also displayed on the combined instrument panel. This indicates that hip and are an important part of the SIPS. there has been a severe malfunction. Con- The SIPS bag system consists of two main tact an authorised Volvo workshop immedi- components, side airbag and sensors. The ately. side airbags are located in the front seat

8803407j backrests. PACOS (Passenger Airbag Cut Off Switch) WARNING The airbag (SRS) is activated. With the switch in this position, persons taller than Side airbags are a supplement to the SIPS 140 cm can sit in the front passenger system. Always use a seatbelt. seat, but never children in a child seat or on a booster cushion. WARNING The airbag (SRS) is deactivated. With the Repairs must only be performed by an au- switch in this position, children in a child thorised Volvo workshop. seat or on a booster cushion can sit in Work on the SIPS system can cause mal- the front passenger seat, but never per- function and result in serious personal inju- sons taller than 140 cm. ry.

WARNING Do not put objects in the area between the outside of the seat and the door panel, since this area is required by the side airbag.

18 01 Safety

Safety in the passenger compartment 01

SIPS bag system The SIPS bag system consists of side airbag WARNING and sensors. A sufficiently violent collision Use only seat covers approved by Volvo. trips the sensors and the side airbags are in- Other seat covers may impede the opera- flated. The airbag inflates between the occu- tion of the side airbags. pant and the door panel and thereby cushions the initial impact while deflating. The Child seats and side airbags side airbag is only normally deployed on the The side airbag does not diminish the protec- side of the collision. tion provided by the car to children seated in a child seat or on a booster cushion. A child seat or booster cushion can be placed on the front passenger seat provided 8803566s that the car does not have an activated pas- Driver’s seat, left-hand drive senger airbag. 8803567s

Front passenger seat, left-hand drive

19 01 Safety

01 Safety in the passenger compartment

Inflatable Curtain (IC)

WARNING Never hang or attach heavy items onto the handles in the roof. The hook is only designed for light clothing (not for solid objects such as umbrellas for example). Do not screw or install anything onto the car’s headlining, door pillars or side panels. This could compromise the intended protection. Only ever use Volvo genuine parts that are approved for placement in these areas. 8803556s

The inflatable curtain IC (Inflatable Curtain) is a supplement to the SIPS and SRS airbags. It is fitted in the headlining along both sides of the roof and protects both front and rear seat passengers. A sufficiently violent collision trips the sensors and the inflatable curtain is inflated. The inflatable curtain helps to prevent the driver and front seat passenger from striking their heads on the inside of the car during a collision.

WARNING The inflatable curtain is a supplement to the seatbelts. Always use a seatbelt.

20 01 Safety

Safety in the passenger compartment 01

Protection against whiplash injury – The whiplash protection system (WHIPS) Correct seating position WHIPS consists of energy absorbing backrests and For the best possible protection, the driver specially designed head restraints for the and front seat passenger should sit in the front seats. The system is actuated by a rear- centre of the seat with as little space as pos- end collision, where the angle and speed of sible between the head and the head re- the collision, and the nature of the colliding straint. vehicle all have an influence. WARNING WARNING If a seat has been subjected to extreme The WHIPS system is a supplement to the forces, such as due to a rear-end collision, seatbelts. Always use a seatbelt. the WHIPS system must be checked by an authorised Volvo workshop. Properties of the seat Part of the WHIPS system’s protective capacity may have been lost even if the seats When the WHIPS system is deployed, the appear to be undamaged. Contact an au- front seat backrests are lowered backward to thorised Volvo workshop to have the sys- alter the seating position of the driver and tem checked even after a minor rear-end front seat passenger. This reduces the risk of collision. whiplash injury.

WARNING Never modify or repair the seat or WHIPS system yourself. Contact an authorised Volvo workshop.

WHIPS system and child seats/booster cushions The WHIPS system does not diminish the protection provided by the car to children seated in a child seat or on a booster cush- 8803529j ion.

21 01 Safety

01 Safety in the passenger compartment

Do not obstruct the WHIPS system 8803530j 8803531j

WARNING WARNING Do not squeeze rigid objects between the If a rear seat backrest is folded down, the rear seat cushion and the front seat back- corresponding front seat must be moved rest. Make sure you do not to obstruct the forward so that it does not touch the folded function of the WHIPS system. backrest.

22 01 Safety

Safety in the passenger compartment 01

When the systems deploy

System Tr iggered Seatbelt tensioner In a frontal collision, side-impact accident or a rear-end collision. Airbags (SRS) In a frontal collision1. Side airbags (SIPS) In a side-impact accident1. Inflatable Curtain IC In a side-impact accident and in some cases in a frontal collision1. Whiplash protection WHIPS In a rear-end collision.

1The bodywork of the car could be greatly deformed in a collision even without airbag deployment. A number of factors such as the rigidity and weight of the object hit, the speed of the car, the angle of the collision etc. affects how the different safety systems of the car are activated.

If the airbags have been deployed, Volvo rec- WARNING ommends: Never drive with deployed airbags. They • Have the car transported to an authorised can make steering difficult. Other safety Volvo workshop.Do not drive with de- systems may also be damaged. The smoke ployed airbags. and dust created when the airbags are de- • Let an authorised Volvo workshop replace ployed can cause skin and eye irritation/in- components in the car’s safety system. jury after intensive exposure. In case of irritation, wash with cold water. The rapid • Always contact a doctor. deployment sequence and airbag fabric may cause friction and skin burns. WARNING The airbag control module is located in the NOTE centre console. If the centre console is drenched with water or other liquid, discon- The SRS, SIPS, IC and belt tensioner sys- nect the battery cables. Do not attempt to tems are deployed only once during a colli- start the car since the airbags may deploy. sion. Have the car transported to an authorised Volvo workshop.

23 01 Safety

01 Safety in the passenger compartment

AIRBAG decals SRS airbag warning decal The SRS airbag warning decal is located on the end face of the dashboard on the pas- SIPS airbag decal senger side. THIS CAR USE EQUIPPED WITH SIPSBAG IN EACH FRONT SEAT THIS CAR USE EQUIPPED WITH SIPSBAG IN EACH FRONT SEAT THE SIPSBAG THE SIDE OR NEAR ACCESSORIES ON ANY INSTALL DO NOT THE SEAT THE SIDE OF USE EXCESSIVE FORCE ON DO NOT SPECIFICATION VOLVO´S MEET THEY UNLESS COVERS SEAT ASSESSOY USE DO NOT SYSTEM THE OF THE EFFECT COVERS COULD REDUCE USE OF OTHER SEAT SEE OWNER´S MANUAL FOR FURTHER INFORMATION BAG 8803558s

8803559s SRS airbag warning decal (Australia) The SIPS airbag decal is located on the door pillar 8803557s

24 01 Safety

Safety mode 01

Safety mode Firstly, remove the remote control key and WARNING then reinsert it. The car’s electronics will then try to reset themselves to normal mode. Then If the car is in safety mode it must not be try to start the car. If Safety mode is still towed. It must be transported to an author- shown on the display then the car must not ised Volvo workshop. be driven or towed. Even if the car appears to be driveable, hidden damage may make the car impossible to control once moving.

Moving the car If Normal mode is shown after Safety mode has been reset, the car can be moved care-

3801152s fully out of a dangerous position. Do not move the car further than necessary. If the car is involved in a collision, the text Safety mode - See manual may appear on the information display. This means that the WARNING car has reduced functionality. Safety mode is Never attempt to repair your car or reset the a protective state that is enforced when the electronics yourself if the car has been in collision may have damaged any of the car’s safety mode. This could result in personal injury or the car not functioning as normal. vital functions, such as the fuel lines, sensors Always allow an authorised Volvo workshop for one of the safety systems, or the brake to check and restore the car to normal sta- system. tus after Safety mode has been displayed.

Attempting to start the car WARNING First, check that no fuel is leaking from the car. There must be no smell of fuel either. Never, under any circumstances, attempt to restart the car if it smells of fuel when the If everything seems normal and you have Safety mode message is displayed. Leave checked for indications of fuel leakage, you the car at once. may attempt to start the car.

25 01 Safety

01 Child safety

General Child seats Location of child seats The position of a child in the car and the Volvo has child safety products that are de- You may place: signed for and tested by Volvo. choice of equipment are dictated by the • a child seat or booster cushion on the child’s weight and size, for more information When using other child safety products it is front passenger seat, provided the pas- see page 27. important to read the installation instructions senger airbag is not activated. included with the product. • a rear-facing child seat in the rear seat that NOTE uses the back of the front seat as support. Do not attach the straps for the child seat to Regulations regarding the placement of the horizontal adjustment bar, springs, rails Child seats and activated airbags are not children in cars vary from country to coun- or beams under the seat. Sharp edges can compatible. try. damage the straps. Always place a child in the rear seat if the passenger airbag is activated. A child in the Children of all ages and sizes must always sit Allow the back of the child seat to rest front passenger seat may suffer serious inju- correctly secured in the car. Never allow a against the dashboard. This applies to cars ry if the airbag deploys. child to sit on the knee of a passenger. without a passenger airbag, or where the airbag is deactivated. Volvo’s own child safety equipment is de- WARNING signed for your car. Use Volvo genuine WARNING Persons shorter than 140 cm may only sit in equipment to best ensure that the mounting the front passenger seat if the passenger Never place the child seat in the front seat if points and attachments are correctly posi- airbag is deactivated. tioned and are sufficiently strong. the car is equipped with an activated front passenger airbag. If problems arise when fitting child safety products, contact the manufacturer for clearer instructions.

26 01 Safety

Child safety 01

Placement of children in the car Weight/ Front seat Outer rear seat Centre rear seat Age <10 kg Rear-facing child seat, secured with Rear-facing child seat, secured with Rear-facing child seat, secured with (0–9 months) seatbelt and straps. seatbelt, support legs and straps. seatbelt, support legs and straps. L1: Type approval no. E5 03135 L1: Type approval no. E5 03135 L1: Type approval no. E5 03135 9–18 kg Rear-facing child seat, secured with Rear-facing child seat, secured with Rear-facing child seat, secured with (9–36 seatbelt and straps. seatbelt, support legs and straps. seatbelt, support legs and straps. months) L1: Type approval no. E5 03135 L1: Type approval no. E5 03135 L1: Type approval no. E5 03135 15–36 kg Booster cushion with or without backrest. Booster cushion with or without backrest. Options: (3–12 yr) L1: Type approval no. E5 03139 L1: Type approval no. E5 03139 • Booster cushion with or without backrest. L1: Type approval no. E5 03139 • Integrated booster cushion. B2: Type approval no. E5 03140

1Suitable for certain child seats as listed in the specified type approval. Child seats can be vehicle-specific, limited, semi-universal or universal. 2Integrated and approved for this age group.

WARNING Never place the child seat in the front seat if the car is equipped with an activated front passenger airbag. If problems arise when fitting child safety products, contact the manufacturer for clearer instructions.

27 01 Safety

01 Child safety

ISOFIX fixture system for child seats* Upper mounting points for child seats Integrated booster cushion* 8904139s 8803565s 8704364s

Mounting points for the ISOFIX fixture sys- The car is equipped with upper mounting Volvo’s integrated booster cushion for the tem are concealed behind the lower section points for child seats. These mounting points centre rear seat is specially designed to pro- of the rear seat backrest, in the outer seats. are located on the parcel shelf and are con- vide optimum safety for children. Combined cealed by plastic covers. Bend aside the with the regular seatbelt, the booster cushion The location of the mounting points is indi- plastic covers to access each respective is approved for children weighing between cated by symbols in the backrest upholstery mounting point. 15 and 36 kg. Check before driving that: (see illustration above). For cars with folding head restraints on the • the seatbelt is in contact with the child’s outside seats the head restraints should be Press the seat cushion down to access the body and is not slack or twisted mounting points. folded to facilitate installation. For detailed information on how the child • the seatbelt is positioned correctly across Always follow the manufacturer’s instruc- the shoulder seat should be tensioned in the upper tions when connecting a child seat to ISOFIX mounting points, see the seat manufacturer’s • the lap section of the seatbelt is posi- mounting points. instructions. tioned low over the pelvis to provide optimal protection WARNING • the seatbelt does not lie across the child’s The child seat’s belts must always be rout- throat or below the shoulder ed under the rear head restraints before • the head restraint is adjusted to suit the they are tensioned at the mounting point. child’s head.

28 01 Safety

Child safety 01

Lowering the booster cushion Fold down the booster cushion. 1 Release the Velcro fastener. Lift back the upper section.

WARNING Repair or replacement should only be performed by an authorised Volvo workshop.

8505333s Do not make any modifications or additions to the booster cushion. If an integrated 2 booster cushion has been subjected to a major load, such as in conjunction with a collision, the entire booster cushion must be replaced. Even if the booster cushion appears to be undamaged, it may not afford the same level of protection. The booster cushion must also be replaced if it is heavily worn. 8505330s 3 8505343s

29 01 Safety

01 Child safety

Raising the booster cushion Child safety locks Fold down the upper section. 1 Secure the Velcro fastener. Manual locking of the rear doors Fold the booster cushion into the seat backrest.

NOTE Make sure that both sections of the booster cushion are secured with the Velcro strap

8505334s before folding up. Otherwise the upper section can become trapped in the rear seat 2 backrest when the booster cushion is folded down again. 8302555s

The child safety locks are located on the trail- ing edge of the rear doors and are only accessible when the doors are open. Use the key blade to turn the lock and thus activate

8505344s or deactivate the child safety lock. 3 The doors cannot be opened from inside. The doors can be opened from inside.

NOTE Cars with electric child safety locks do not have manual child locks. 8505335s

30 01 Safety

Child safety 01

Electrical locking of the rear doors* and power windows WARNING Always keep the lock buttons pulled up when driving. In the event of an accident, this allows the emergency services to get into the car quickly. Passengers in the rear seat cannot open the doors from inside if the child safety locks are activated. s 9 8 7 3 0 6 3 The child safety locks can be activated in ignition position I or II. When the electric child safety locks are activated, the rear windows can only be opened from the driver’s door. The rear doors cannot be opened from inside. Press the switch on the driver’s door. A message appears on the information display. The lamp on the button illuminates when the locks are activated.

31 Remote control key/key ...... 34 Keyless drive ...... 40 Locks...... 42 Alarm*...... 45

32 LOCKS AND ALARM 02 02 Locks and alarm

Remote control key/key

General The key blades’ unique code is available at Indicator for locking/unlocking authorised Volvo workshops, which can pro- When the car is locked or unlocked using the The car is supplied with two remote control 02 duce new key blades. remote control key, the direction indicators keys or PCCs (Personal Car Communicator). confirm that locking/unlocking was correctly Up to six keys can be ordered. They are used Loss of a remote control key performed: to start the car and for locking and unlocking. If you lose a remote control key, take the oth- • locking: one flash The PCC has increased functionality com- er remote control keys to an authorised Volvo pared with the remote control key. Only the workshop. The code of the missing remote • unlocking: two flashes. remote control key is referred to in the re- control key must be erased from the system After locking the indication is only given if all mainder of this chapter when describing as a theft prevention measure. locks are activated once the doors have been functions available in both the PCC and re- closed. The current number of keys registered to the mote control key. car can be checked under Car settings The function can be activated/deactivated A maximum of six remote control keys can Car key memory Number of keys. For a under Car settings Light settings be programmed and used for one single car. description of the menu system, see Lock feedback light or Car settings page 94. Light settings Unlock feedback light. WARNING For a description of the menu system, see page 94. If there are children in the car: Key memory – door mirrors and driver’s Always remember to switch off the power seat* supply to locks, power windows and sun- The settings are automatically connected to Immobiliser roof by removing the remote control key if each respective remote control key, see Each remote control key has a unique code. the driver leaves the car. page 61 and 77. The car can only be started with the correct remote control key with the correct code. The function can be activated/deactivated Detachable key blades under Car settings Car key memory The following error messages in the informa- A remote control key contains a detachable Seat & mirror positions. For a description of tion display (on the combined instrument metal key blade for mechanical locking/un- the menu system, see page 94. panel) are related to the electronic locking the driver’s door, boot lid and glove- immobiliser: box (service locking). For cars with Keyless drive function, see page 41. For key blade functions, see page 37. For service locking, see page 38.

34 02 Locks and alarm

Remote control key/key

Message Specification Functions – remote control key/PCC Locking Unlocking Key error Error reading remote 02 Try again control key during start. 2 Approach lighting Try to start the car 1 Boot lid again. 4 3 Panic function Car key Applies only to the 5 Not found PCC’s Keyless drive Total airing function (global opening) function. Errors reading the PCC during One long press (at least 4 seconds) on starting. Try to start the button or opens or closes all windows car again. (also closes the sunroof). Immobiliser Remote control key

See manual function error during 3905616s WARNING start. Contact an Remote control key If the sunroof and windows are closed using authorised Volvo the remote control key, check that no one is workshop. in danger of getting hands caught. For starting the car, see page 81. 2 The function can be used to quickly air the 1 Low battery in remote control key 4 car in hot weather for example. The batteries should be replaced if: 3 5 Function buttons • the information symbol illuminates and Locking – Locks the doors and boot lid and Car key Battery low is shown in the then activates the alarm. display and/or • the locks repeatedly do not react to sig- Unlocking – Unlocks the doors and boot lid nals from the remote control key within and deactivates the alarm. 20 metres. 3603821s The function can be changed from unlocking For changing the battery, see page 39. PCC (Personal Car Communicator) all doors simultaneously, to opening the driver’s door after one press of the button and opening the remaining doors after a further press of the button (within 10 seconds). The

35 02 Locks and alarm

Remote control key/key

function is changed under Car settings Unique functions – PCC NOTE Lock settings Unlocking, doors. For a 02 description of the menu system, see 2 If none of the indicator lamps illuminates page 94. with repeated use of the information button 2 and in different locations (as well as after Approach lighting – Used to switch on the 1 7 seconds and after the light has travelled car’s lighting at a distance. For more infor- around on the PCC), contact an authorised mation, see page 69. Volvo workshop. 2 Boot lid – Unlocks the boot lid only (without The indicator lamps provide the informa- opening it). For more information, see tion shown in the following illustration. page 43. Panic function – Used to attract attention in 1 2 an emergency. Press and hold the red button 3603840s for at least 3 seconds or press it twice within Information button 3 seconds to activate the direction indicators Indicator lamps and the horn. The function can be turned off Using the information button enables ac- with the same button once it has been active cess to certain information from the car via for at least 5 seconds. Otherwise the function 3 4 the indicator lamps . switches off automatically after 2 minutes and 45 seconds. Using the information button 1. Press the information button .

Range 3603841s The remote control has a range of up to 20 m 2. All indicator lamps flash for approximately 7 seconds and the light travels Green continuous light: the car is locked. from the car. around on the PCC. This indicates that Yellow continuous light: the car is un- the information from the car has been locked. NOTE read. If any if the other buttons are Red continuous light: the alarm has been pressed during this time then the read- The remote control key functions can be triggered. disrupted by surrounding radio waves, ing is interrupted. buildings, topographical conditions etc. The Red light flashing alternately in the two car can always be locked/unlocked using indicator lamps: indicates, using the HBS the key blade, see page 37. (Heart beat sensor), that someone may

36 02 Locks and alarm

Remote control key/key

be in the car. This indication is only The PCC that was last used for locking/un- Detachable key blade displayed if the alarm was triggered. locking will show the correct status. Use the remote control key’s detachable key 02 blade to block access to the glovebox and Range NOTE cargo area1. This means that the remote con- The PCC lock functions have a range of up If no indicator lamps illuminate when the in- trol key without key blade can only be used to 20 m from the car. formation button is used then this can be to open the doors and to drive the car. The approach lighting, panic function and the because the last communication between This key blade is used for locking the glove- functions controlled by the information but- the PCC and the car was disrupted by surrounding radio waves, buildings, topo- box before leaving the car, such as for serv- ton have a range of up to a maximum of graphical conditions etc. icing or valet parking at a hotel for example 100 m from the car. (so-called service locking, see page 38). Hand over the remote control key and keep NOTE Heart Beat Sensor the removable key blade. The function operates using an HBS The information button functions can be (Heart beat sensor). HBS is a supplement to disrupted by surrounding radio waves, Unlocking with the key blade buildings, topographical conditions etc. the car’s alarm system and can indicate at a distance whether anybody is in the car. This The key blade can be used if the remote control key functions are disrupted or if the re- Out of PCC range indication is only displayed if the alarm was triggered. mote control key’s batteries have been dis- If the PCC is too far away from the car for the charged. information to be read then the status the car The HBS detects an individual’s heartbeat Unlocking the boot lid, see page 44. was last left in is shown, without the light that is transmitted to the car’s bodywork. For travelling around on the PCC. this reason the function of the HBS can be The driver’s door is unlocked (without acti- disturbed in an environment subject to noise vating central locking) using the key blade in and vibration. the door handle’s keyhole. However, this triggers the alarm. Deactivate the alarm by Keyless drive inserting the remote control key in the igni- See page 40. tion switch.

1 Applies to certain markets

37 02 Locks and alarm

Remote control key/key

Removing the key blade Service locking* Service locking: turn the key blade in the glovebox clockwise 180 degrees. This also 02 means that the boot lid is blocked against opening with the remote control key (a message is shown in the information display). 1 Locking the glovebox, see page 43.

2 8302565s 3603822s Slide the spring-loaded catch to the side Active locks for remote control key when service locking is not activated. while pulling the key blade straight out backwards .

Inserting the key blade Carefully refit the key blade in place in the remote control key to avoid damaging it. 1. Hold the remote control key with the slot pointed up and lower the key blade into its slot. 2. Lightly press the key blade. You should hear a "click" when the key blade is locked in. 8302564s Active locks for remote control key when service locking is activated.

38 02 Locks and alarm

Remote control key/key

Replacing the remote control key Insert a screwdriver in the hole behind Remote control key battery the spring-loaded catch and gently prise Carefully prise out the battery. Install a the remote control key up. new one with the (+) side down. 02 1 PCC NOTE Carefully prise out the batteries. First Turn the remote control key over with the install one new one with the (+ ) side up. buttons facing up, this is to avoid the batter- Position the white plastic tab in between ies falling out when it is opened. and finally install a second new battery 1 with the (+) side down. 2 IMPORTANT Assembly Avoid touching the battery and its terminals 1. Press the remote control key together. 3603816s with your fingers, as this could damage their 2. Hold the remote control key with the 2 functionality. slot pointed up and lower the key blade into its slot. Battery replacement 3. Lightly press the key blade. You should 3 hear a "click" when the key blade is locked in.

IMPORTANT Dispose of old batteries in an environmen- 3603817s tally responsible manner. Battery type: CR2430, 3 V (one in remote control key and two in the PCC).

Opening Slide the spring-loaded catch to the G015518 side while pulling the key blade straight out backwards . Closely study how the battery/batteries are secured on the inside of the cover, with regard to their (+) and (–) sides.

39 02 Locks and alarm

Keyless drive

Keyless drive (PCC only) if the PCC is on the other side of the car to IMPORTANT the door. 02 Never leave a PCC behind in the car. Keyless lock and ignition system The red circles in the illustration indicate the range covered by the system’s antennas. Interference to PCC function If all PCCs are removed from the car and if all Electromagnetic fields and screening can in- doors are closed then a warning message is terfere with the keyless drive system. For this shown in the information display and an au- reason, do not place the PCC near mobile dio reminder signal sounds at the same time. phones or metallic objects. The message disappears when a PCC is brought back to the car. If interference is experienced nonetheless, use the PCC and key blade in the normal The warning message and audio reminder way, see page 35. signal disappear when the PCC is brought back to the car after:

8302561s Unlocking • a door has been opened and closed Open the doors with the door handles or The keyless drive function in the PCC allows • the PCC is inserted into the ignition switch open the boot lid with its handle. the car to be unlocked, driven and locked without the need for a key. You simply have •the READ button has been pressed. Unlocking with the key blade to have the PCC with you. The system makes Handling the PCC safely If the keyless drive function in the PCC is not it easier and more convenient to open the If a PCC with keyless drive function is left in operating, then the driver’s door can be un- car, for example when your hands are full. the car, it is deactivated temporarily when the locked with the key blade. In this case central locking is not activated. The car’s two PCCs incorporate the Keyless car is locked. This prevents unauthorised entry. function. Additional PCCs can be ordered. NOTE PCC range However, if someone breaks into the car, opens the door and finds the PCC, it can be Unlocking with the key blade triggers the In order to open a door or the boot lid, a PCC alarm. For deactivation, see page 46. reactivated. It is therefore important to han- must be no more than approx. 1.5 metres dle all PCCs with equal care. from the car door handle or boot lid. This means that the person who wishes to lock or unlock a door must have the PCC with him or her. It is not possible to lock or unlock a door

40 02 Locks and alarm

Keyless drive

Key memory – driver’s seat and door mirrors* 02 PCC memory function If several people with PCCs approach the car, then the settings for the person who opens the driver’s door are implemented. The settings are changed in two ways after the driver’s door has been opened: • from the driver’s seat position: press the unlock button on the PCC, see page 35 • press the button for seat settings, see page 61.

Locking Lock the doors and boot lid by pushing in the lock button on one of the door handles on the outside. All doors and the boot lid must be closed before the car can be locked. Otherwise the car will not be locked.

Lock settings The keyless function can be adapted to specify which of the car doors are to be unlocked, under Car settings Lock settings Keyless entry. For a description of the menu system, see page 94.

41 02 Locks and alarm

Locks

Locking and unlocking From the inside Automatic relocking If none of the doors or the boot lid is opened 02 From the outside within two minutes of unlocking, all are The remote control key locks/unlocks all locked again automatically. This function doors and the boot lid simultaneously. The prevents the car from being left unlocked unlock buttons and inside handles of the doors intentionally. For cars with alarms, see are disengaged during locking1. page 45. The fuel filler flap can be opened when the Automatic locking car is unlocked. It cannot be opened if the The doors and boot lid can be locked auto- car is locked and the alarm is armed. matically when the car starts to move.

NOTE 8302562s This function can be activated/deactivated under Car settings Lock settings Au- All of the doors and the boot lid can be The car can be locked even if a door is tolock, doors. For a description of the menu 1 locked or unlocked simultaneously using the open . It is also locked when the door is system, see page 94. closed, and there is a risk that the remote door buttons on the door panel. control key will be locked in. Unlocking Press the door unlock button. Press and hold 1Only applies to cars in certain markets, but not to cars with Keyless drive. to also open all windows. Locking WARNING Press the door lock button after the front doors are closed. Press and hold to also Be aware that there is a risk that you can be locked in the car if it is locked from the out- close all of the windows and the sunroof if fit- side. ted. All the doors can be locked manually with their respective lock buttons after they have been closed. Pull the door handle once to unlock the door. Pull the door handle twice to open the door. 1 Applies to certain markets

42 02 Locks and alarm

Locks

Glovebox Unlocking/locking the boot lid The alarm indicator on the instrument panel starts to flash, which shows that the alarm is A B armed. 02 If the doors are locked when the boot lid is closed then it remains unlocked until the car is locked with the remote control. Unlocking the car from inside 8302560s 3905612s

Unlock the glovebox by turning the key a Unlocking with the remote control key quarter of a turn (90 degrees) anticlock- Press the remote control key button to un- wise. The keyhole is vertical in the unlock the boot lid. locked position. Lock the glovebox by turning the key a NOTE 1 quarter of a turn (90 degrees) clockwise. The keyhole is horizontal in the locked The function does not open the boot lid. 3603845s position. Press the headlamp control panel button The glovebox can only be locked and un- The alarm indicator on the instrument panel to unlock the boot lid. locked with the removable key blade in the goes out to show that the whole car is not remote control key. armed. The alarm’s level and movement sensors and the sensors for opening the boot lid Service locking, see page 38. are automatically disconnected. The doors remain locked and armed. Locking with the remote control key Press the remote control key button for locking, see page 35.

43 02 Locks and alarm

Locks

Unlocking with the key blade Deadlocks1 ble within one minute after the engine has stopped. 1 02 2. Press the button. If the car is equipped with an alarm, the movement and tilt detectors* are also deactivated at the same time, see page 47. The light in the button remains on until the car is locked with the remote control key. A message remains on the display for

8302568s 10 seconds or until the car is locked. The de- 2 tectors and deadlocks are reactivated the

3905611s next time the car is started. When deadlocked, the doors cannot be WARNING opened from the inside if they are locked. The deadlocks are activated with the remote Do not allow anyone to remain in the car control key and are set after a 10 second de- without first deactivating the deadlocks to lay after the doors are locked. avoid the risk of anyone being locked in. The car can only be unlocked from a dead- 8302569s lock state with the remote control key. The If the remote control key button for opening driver’s door can also be unlocked from the the boot lid is not working then the boot lid outside with the key. can be unlocked with the key blade. Prise off the plug covering the keyhole. Temporary deactivation of deadlocks If someone wants to stay in the car and the Unlock the boot lid by turning the key doors still need to be locked from the out- blade one half turn anticlockwise as illustrated. side, then the deadlocks can be deactivated. 1. Remove the remote control key from the ignition switch. Deactivation is only possi- 1 Applies to certain markets

44 02 Locks and alarm

Alarm*

General NOTE Arming the alarm Press the remote control key lock button. A The alarm is triggered if: Do not attempt to repair or modify alarm 02 long flash from the car’s direction indicators system components. All such attempts • a door, the bonnet or the boot lid is confirms that the alarm is armed and that the opened could affect the terms of insurance. doors are locked. • a non-approved key is used in the keyhole or if force is exerted on the keyhole. Alarm indicator The way in which the car confirms that the alarm is armed can be adapted to your re- • a movement is detected in the passenger compartment (if fitted with a movement quirements under Car settings Lock detector) settings Keyless entry. For a description of the menu system, see page 94. • the car is raised or towed away (if fitted with a tilt detector*) • a battery cable is disconnected. • anyone tries to disconnect the siren. If there is a fault in the alarm system, a message appears on the information display. Contact an authorised Volvo workshop. 8302563s

NOTE An alarm indicator on the dashboard indi- The movement detectors trigger the alarm cates the alarm system’s status: in the event of movements in the passenger • lamp off – the alarm is disarmed compartment. For this reason the alarm could be triggered is the car is left with a • the lamp flashes once a second – the window open or if an electric passenger alarm is armed compartment heater is used. To avoid this: • the lamp flashes rapidly after disarming close the windows when leaving the car and the alarm (and until the remote control key aim the air from the passenger compart- is inserted in the ignition switch and igni- ment heater so that it is not directed up into tion position I is reached) – the alarm has the passenger compartment. been triggered.

45 02 Locks and alarm

Alarm*

Disarming the alarm Deactivating a triggered alarm Other alarm functions Press the remote control key unlock button. Press the remote control key unlock button 02 Two short flashes from the car’s direction in- or insert the remote control key in the ignition Automatic arming of the alarm dicators confirm that the alarm is disarmed switch. Confirmation is given by two short This function prevents the car being left with and that the doors are unlocked. flashes from the direction indicators. alarm disarmed unintentionally. If the car is unlocked with the remote control key (and the alarm is disarmed) and none of the doors or the boot lid is opened within two minutes then the alarm is automatically armed. The car is locked at the same time.

Alarm signals When the alarm is triggered, the following happens: • A siren sounds for less than 30 seconds. The siren has its own battery which is independent of the car battery. • The direction indicators flash for five minutes or until the alarm has been deactivated.

Remote control key not working If the remote control key is not working, the alarm can still be switched off and the car started as follows: 1. Open the driver’s door with the key blade. The alarm is triggered and the siren sounds. 2. Insert the remote control key in the keyhole. The alarm is deactivated. The alarm indicator flashes quickly until the remote control key is inserted.

46 02 Locks and alarm

Alarm*

Temporary disarming of the alarm Testing the alarm system 3. Wait 15 seconds. 4. Open the bonnet with the handle under 02 Deactivation of the detectors Testing the movement detector in the the dashboard. A siren sounds and all passenger compartment direction indicators flash. 1. Close all windows. Remain in the car. 5. Deactivate the alarm by unlocking the car with the remote control key. 2. Arm the alarm, see page 45. 3. Wait 15 seconds. 4. Trigger the alarm by moving your arms forward and back at backrest height. A siren sounds and all direction indicators flash. 5. Deactivate the alarm by unlocking the car with the remote control key. 3905611s Testing the alarm sensors in the doors To prevent the alarm being triggered errone- 1. Arm the alarm, see page 45. ously, such as during a ferry journey, the movement and tilt detectors can be tempo- 2. Wait 15 seconds. rarily disengaged. 3. Unlock the driver’s door using the key Press the button for disengagement. Disen- blade. gagement is only possible within one minute 4. Open the driver’s door. A siren sounds after the engine has stopped. The light in the and all direction indicators flash. button remains on until the car is locked. 5. Deactivate the alarm by unlocking the A message remains on the display for car with the remote control key. 10 seconds or until the car is locked. Testing the alarm sensors in the bonnet The detectors are reactivated the next time 1. Sit in the car and deactivate the alarm, see the car is started. page 46. If the car is equipped with deadlocks then 2. Arm the alarm, see page 45. Remain in this is engaged at the same time, see the car and lock the doors with the page 44. button on the remote control key.

47 Instruments and controls ...... 50 Ignition positions...... 59 Seats ...... 60 Steering wheel ...... 63 Lighting ...... 64 Wipers and washing...... 73 Windows, rearview and door mirrors ...... 75 Power sunroof*...... 79 Starting the engine...... 81 Gearboxes...... 84 Foot brake ...... 87 Parking brake ...... 89

48 YOUR DRIVING ENVIRONMENT 03 03 Your driving environment

Instruments and controls

Instrument overview

1 2 3 4 5 6 7 8

9 9 11 10 12 10

18 17 16 15 14

19 8505311s Left-hand drive

50 03 Your driving environment

Instruments and controls

Function Page Function Page Menus and messages, direction indicators, main/ 97, 67, 65, Menu control, climate control and audio system 94, 102, dipped beam, trip computer 118 112 Cruise control 122, 58 Climate control, ECC 102 Horn, airbags 63, 15 Gear selector 84 03 Combined instrument panel 54, 58 Controls for active chassis (Four-C) 121 Menu, audio and phone control 94, 109, Wipers and washing 73, 74 140 Ignition switch 81 Steering wheel adjustment 63 Start/stop button 59 Parking brake 89, 89 Hazard warning flashers 67 Bonnet opener 172 Door handle – Seat adjustment 60 Control panel 75, 77, 31, Headlamp control, opener for fuel filler flap and boot 64, 155, 42 lid 158

51 03 Your driving environment

Instruments and controls

1 2 3 4 5 6 7 8

10 10 20

11 19 11

17 16 15 14 13

12 8505325s Right-hand drive

52 03 Your driving environment

Instruments and controls

Function Page Function Page Hazard warning flashers 67 Control panel 75, 77, 31, 42 Ignition switch 59 Seat adjustment 60 Start/stop button 81 Bonnet opener 172 03 Cruise control 122, 123 Parking brake 89, 89 Combined instrument panel 54, 58 Steering wheel adjustment 63 Horn, airbags 63, 15 Menus and messages, direction indicators, main/ 97, 67, 65, dipped beam, trip computer 118 Menu, audio and phone control 94, 109, Controls for active chassis (Four-C) 121 140 Wipers and washing 73, 74 Gear selector 84 Headlamp control, opener for fuel filler flap and boot 64, 155, Climate control, ECC 102. lid 158 Door handle – Menu control, climate control and audio system 94, 102, 112

53 03 Your driving environment

Instruments and controls

Information displays Meters Indicator, information and warning symbols 1 2 3 3

03 123456 0 1 0 1 T2 12.3 12:34

0 1 o P _3 C

1 3801154s 3603843s 1 1 2 2

Information displays Meters in the combined instrument panel 3603801s Indicator and warning symbols The information displays show informa- Speedometer tion on some of the car’s functions, e.g. Fuel gauge, see also refuelling, page 155. Indicator and information symbols cruise control, trip computer and messages. 1 Tachometer Indicator and warning symbols The information is shown with text and sym- The meter indicates engine speed in Main beam and direction indicator symbols. thousands of revolutions per minute bol There are further descriptions under the (rpm). functions that use the information displays. Functionality check All indicator and warning symbols illuminate in ignition position II or when the engine is started. When the engine has started, all the symbols should go out except the parking brake symbol, which only goes out when the brake is disengaged.

1 For certain engine variants, the symbol for low oil pressure is not used. Warnings are given via display text, see page 173.

54 03 Your driving environment

Instruments and controls

If the engine does not start or if the function- Indicator and information symbols Fault in emissions system ality check is carried out in ignition position II Symbol Specification Drive to an authorised Volvo work- then all symbols go out after 5 seconds ex- shop to have the system checked. cept the symbol for a faults in the car’s emis- Direction indicators on trailer ABS fault sions system and the symbol for low oil pres- If this symbol illuminates then the sys- sure. Fault in emissions system tem is not working. The car’s regular brake 03 ABS fault system continues to work, but without the ABS function. Rear fog lamp 1. Stop the car in a safe place and turn off Stability system the engine. 2. Restart the engine. Engine preheater (diesel) 3. Drive to an authorised Volvo workshop to have the ABS checked if the symbol Low level in fuel tank remains lit. Information, read display Rear fog lamp text This symbol illuminates when the rear Main beam On fog lamp is on. Stability system Left-hand direction A flashing symbol indicates that the indicators stability system is operating. If the symbol il- Right-hand direction luminates with constant glow then there is a indicators fault in the system. Direction indicators on trailer Engine preheater (diesel) This symbol flashes when the direc- This symbol illuminates during engine tion indicators are used and the trailer is con- preheating. Preheating occurs when the tem- nected. If the symbol flashes more quickly, perature is below –2 C. The car can be start- then one of the lamps on the trailer or the car ed once the symbol goes out. is faulty.

55 03 Your driving environment

Instruments and controls

Low level in fuel tank Both direction indicator symbols flash when symbol lights up and the oil level is normal, This symbol illuminates when there the hazard warning flashers are used. contact an authorised Volvo workshop. are approximately eight litres of fuel left in a Parking brake applied petrol-engined car, or seven litres in a diesel- Indicator and warning symbols This symbol illuminates with a con- engined car. Symbol Specification stant glow when the parking brake is applied. Information, read display text 1 With the electric parking brake, this symbol 03 Low oil pressure When one of the car’s systems does flashes while it is being applied and then illu- not behave as intended, this information Parking brake applied minates with a constant glow. symbol illuminates and a text appears on the A flashing symbol means that a fault has aris- information display. The message text is Airbags – SRS en. Read the message on the information cleared using the READ button, see page 97 display. or it disappears automatically after a time Seatbelt reminder (time depending on which function is indicat- NOTE ed). The information symbol can also illumi- Alternator not charging nate in conjunction with other symbols. This symbol also illuminates when the mechanical parking brake is only lightly applied. NOTE Fault in brake system

When a service message is shown, the Warning Airbags – SRS symbol and message are cleared using the If this symbol remains on or illumi- READ button, or disappear automatically nates while driving, it means a fault has been after a time. 1 For certain engine variants, the symbol for low oil pressure is not used. Warnings detected in the seatbelt buckle, SRS, SIPS, are given via display text, see page 173 or IC systems. Drive immediately to an au- Main beam On and 174. thorised Volvo workshop to have the system The symbol illuminates when main checked. beam is on and with main beam flash Low oil pressure Seatbelt reminder Left-hand direction indicators If this symbol illuminates during driving then the engine’s oil pressure is too low. This symbol illuminates if someone in Right-hand direction indicators Stop the engine immediately and check the a front or rear seat has not put on his or her engine oil level, top up if necessary. If the seatbelt.

56 03 Your driving environment

Instruments and controls

Alternator not charging Reminder – doors not closed WARNING This symbol illuminates during driving If one of the doors, the bonnet1 or boot lid is if a fault has occurred in the electrical sys- If the level in the reservoir is below MIN, not closed properly then the information or tem. Contact an authorised Volvo workshop. the car should be transported to an au- warning symbol illuminates together with an thorised Volvo workshop to have the explanatory text message in the combined Fault in brake system brake system checked. instrument panel. Stop the car in a safe place If this symbol lights, the brake fluid as soon as possible and close the door, bon- 03 level may be too low. Stop the car in a safe WARNING net or boot lid, whichever is open. place and check the level in the brake fluid If the brake and ABS symbols are on at the reservoir, see page 176. If the car is driven at a speed lower same time, there is a risk that the rear end than 7 km/h then the information sym- If the brake and ABS symbols illuminate at will skid during heavy braking. bol illuminates. the same time, there may be a fault in the brake force distribution system. Warning If the car is driven at a speed higher The red warning symbol illuminates than 7 km/h then the warning symbol il- 1. Stop the car in a safe place and turn off when a fault has been indicated which could luminates. the engine. affect the safety and/or driveability of the car. 2. Restart the engine. An explanatory text is shown on the informa- • If both symbols extinguish, continue driv- tion display at the same time. The symbol re- ing. mains visible until the fault has been rectified • If the symbols remain on, check the level but the text message can be cleared with the in the brake fluid reservoir. See page 176. READ button, see page 97. The warning If the brake fluid level is normal but the symbol can also illuminate in conjunction symbols are still illuminated, the car can with other symbols. be driven, with great care, to an authorised Volvo workshop to have the brake Action: system checked. 1. Stop in a safe place. Do not drive the car further. 2. Read the information on the information display. Implement the action in accordance with the message in the display. Clear the message using READ. 1 Only cars with alarm

57 03 Your driving environment

Instruments and controls

Trip meter Clock Controls for trip meter and clock

123456 03 T2 12.3 12:34 T2 12.3 12:34

0 1 0 1 o o P _3 C _3 C 2 1 2 3801157s 3801156s G016141 Trip meter and button Clock and setting knob Location of controls The meters are used to measure short dis- Turn the knob clockwise/anticlockwise to tances. A short press on switches be- set the time. The set time is shown in the in- tween the two trip meters T1 and T2. A long formation display . press (more than 2 seconds) resets an active The clock can be temporarily replaced by a trip meter to zero. The distance is shown in symbol in conjunction with a message, see the display . page 97.

58 03 Your driving environment

Ignition positions

Functions NOTE Return to ignition position 0 Press START/ STOP to return from I, II, or III The brake/clutch must not be depressed if to ignition position 0. ignition positions I or II are required. NOTE NOTE During towing, ignition position II should be 03 Foreign objects in the ignition switch can used so that the lighting can be switched impair the function or destroy the lock. on.

Ignition position 0 Position Function Insert the remote control key in the ignition 0 Odometer, clock and temper-

3905610s switch. ature gauge are illuminated. The Ignition switch with remote control key, start/ steering lock is deactivated. The stop button Ignition position I audio system can be used. Press the remote control key into the ignition I Sunroof, power windows, Insert and remove the remote control switch and press START/ STOP. phone, ventilation fan, ECC, key windscreen wipers can be used. The remote control key is inserted into the ig- Ignition position II II The headlamps come on. nition switch. With one gentle push the re- Press the remote control key into the ignition Warning/indicator lamps illuminate for 5 seconds. All mote control key is captured into the correct switch and press START/ STOP for approx. position. equipment operates apart from 2 seconds. heated seats and rear window The remote control key is withdrawn from the defroster which only work when ignition switch by means of one touch. The Starting the engine III the engine is running. key is then ejected and can be removed. Start the engine, see page 81. Automatic transmission* must be in position P. Stopping the engine For information on the audio system’s func- Press START/ STOP. (If the engine is running tions with remote control key removed, see and the car is moving, keep the button de- page 109. pressed until the engine stops).

59 03 Your driving environment

Seats

Front seats Lowering the front seat backrest Power seat*

03 2 1 4 3 3 2 1 5 3 1 2 3 6 8505326s 3603820s 8505315s Front edge of seat cushion up/down Lumbar support, turn the wheel1. The passenger seat backrest can be folded forward to make room for long loads. Seat forward/backward and up/down Forward/backward: lift the handle to adjust the distance to the steering wheel Move the seat as far back/down as pos- Backrest rake and pedals. Check that the seat is locked sible. The power front seats have overload protec- after changing position. Adjust the backrest to an upright position tion which is tripped if a seat is blocked by an Raise/lower front edge of seat cushion, Lift the catches on the rear of the back- object. If this happens, turn off the ignition pump up/down. rest and fold it forward. and wait a short time before adjusting the seat again. Adjust backrest rake, turn the wheel. Push the seat forward so that the head re- Raise/lower the seat, pump up/down. straint "locks" in under the glovebox. Only one of the electric motors can be used Control panel for power seat*. at a time.

WARNING Adjust the position of the driver’s seat before setting off, never while driving. Check that the seat is locked in position.

1 Also applies to power seat.

60 03 Your driving environment

Seats

Preparations release the button then the movement of the It is also possible to use the key memory by The seats can be adjusted for a certain time seat will stop. pressing the unlock button on the remote after unlocking the door with the remote con- control key when the driver’s door is open. Key memory* in remote control key trol key without the key in the ignition switch. The key memory can be activated/deactivat- Seat adjustment is normally made when the The positions of the driver’s seat and the ed under Car key memory Seat & mirror ignition is on and can always be made when door mirrors are stored in the key memory positions. For a description of the menu sys- the engine is running. when the car is locked with the remote con- tem, see page 94. 03 trol key. Seat with memory function* NOTE 1 2 3 4 The key memory in the two remote controls and the seat memory are completely independent of each other. G014387 8505312s When the car is unlocked with the same re- Store setting mote control and the driver’s door is opened 1. Adjust the seat and the door mirrors. the driver’s seat and also the door mirrors 2. Press and hold the button, while automatically adopt the positions stored in depressing the , or button. the key memory.

Using a stored setting NOTE Press one of the memory buttons – The seat and the door mirrors do not move until the seat and the door mirrors stop. If you if they are already in the relevant position.

61 03 Your driving environment

Seats

Emergency stop Rear seats Lowering the outer head restraints, rear If the seat accidentally begins to move, press seat* one of the buttons to stop the seat. Lowering the rear seat backrest Restarting to reach the seat position stored See information, page 159. in the key memory is performed by pressing the unlock button on the remote control key. Head restraint, centre seat, rear 03 In this situation the driver’s door must be open.

WARNING Risk of crushing! Make sure that children do not play with the controls. Check that there

are no objects in front of, behind or under 3801190s the seat during adjustment. Ensure that none of the backseat passengers will be 1. The ignition must be in position I or II. trapped. 2. Press the button to lower the rear head restraints to improve visibility. Heated/ventilated seats* 8505332s Do not lower the head restraints if there are See page 102. The head restraint is adjusted vertically ac- passengers using the outer seats. The head cording to the height of the passenger. The restraint is moved back manually. top of the head restraint is adjusted to the rear centre of the head. Slide it up as re- NOTE quired. To lower the head restraint again the The head restraints must be in locked posi- button by the left-hand shaft must be tion after being raised. pressed in while the head restraint is pressed down.

62 03 Your driving environment

Steering wheel

Adjusting Keypads Horn

1 2

03 1

2 3603792s 3603793s 6401073s Adjusting the steering wheel Keypads in the steering wheel Horn The steering wheel can be adjusted for both Cruise control, see page 122 Press the centre of the steering wheel to sig- height and depth: Adaptive cruise control, see page 125 nal. 1. Pull the lever towards you to release Audio and phone control, see page 109 the steering wheel. 2. Adjust the steering wheel to the position that suits you. 3. Push back the lever to fix the steering wheel in place. If the lever is stiff, press the steering wheel lightly at the same time as you push the lever back. WARNING Adjust and secure the steering wheel before driving. With speed related power steering* the level of steering force can be adjusted, see page 121.

63 03 Your driving environment

Lighting

Light switches Headlamp levelling The load in the car changes the vertical alignment of the headlamp beam, which could dazzle oncoming motorists. Avoid this by adjusting the height of the beam. Lower the beam if the car is heavily laden. 03 1. Have the engine running or use ignition position I. 2. Roll the thumbwheel up/down to raise/lower beam alignment. 1 2 3 4 5 Cars with Bi-Xenon headlamps and Active

3501881s Bi-Xenon headlamps* have automatic head- Overview, light switches lamp levelling and are not equipped with a thumbwheel. Thumbwheel for adjusting display and instrument lighting Rear fog lamp Front fog lamps* Light switches Headlamp levelling

Instrument lighting Different display and instrument lighting is switched on depending on ignition position. The display lighting is automatically sub- dued in darkness and the sensitivity is set with the thumbwheel . The intensity of the instrument lighting is adjusted with the thumbwheel.

64 03 Your driving environment

Lighting

Main/dipped beam Dipped beam Active Bi-Xenon Lights* When the engine is started, dipped beam is activated automatically* if the headlamp control is in position . If necessary, automatic dipped beam for this position can be deactivated by an authorised Volvo work- 1 shop. 03 2 In position dipped beam is always activated automatically when the engine is running or with ignition position II.

Main beam 3501889s 3501888s Headlamp control and stalk switch Main beam can only be activated when the Headlamp pattern with function deactivated (left) headlamp control is in position . Acti- and activated (right) respectively Position Specification vate/deactivate main beam by moving the If the car is equipped with active headlamps stalk switch to the end position towards (Active Bi-Xenon Lights, ABL) the light from Automatic*/deactivated the steering wheel and release. dipped beam. Only main the headlamps follows the steering wheel beam flash. When main beam has been activated the movement in order to provide maximum Position/parking lamps symbol illuminates in the combined in- lighting in bends and junctions and so pro- strument panel. vide increased safety. Automatic dipped beam. The function is activated automatically when Main beam and main beam Main beam flash flash work in this position. the car is started. Following which, it can be Move the stalk switch gently to position deactivated/activated with the button toward the steering wheel. Main beam in the centre console. NOTE comes on until the stalk switch is released. The function is only active in twilight or dark- Main beam can only be activated in ness and only when the car is moving. position .

65 03 Your driving environment

Lighting

Position/parking lamps Brake light Front fog lamps* The brake light automatically comes on during braking.

Emergency brake light and automatic hazard warning flashers, EBL 03 Emergency Brake Lights, EBL are activated in the event of heavy braking or if the ABS brakes are activated. This function means that the brake light flashes to immediately alert cars travelling behind. 3501900s 3603815s The system is activated if ABS is used for Headlamp control in position for position/park- more than 0.5 seconds or in the event of Button for front fog lamps ing lamps heavy braking, however, only at speeds The front fog lamps can be switched on above 50 km/h. When the speed of the car is Turn the headlamp control to the centre posi- along with main/dipped beam or the position lower than 30 km/h the brake lights shine tion (number plate lighting comes on at the lamps/parking lamps. same time). normally again and the hazard warning flashers are switched on automatically. The haz- Press the button for on/off. The light in the The lighting also comes on when the boot lid ard warning flashers remain on until the car is button illuminates when the fog lamps are is opened in order to alert anybody behind. driven off again but can be deactivated with on. the button for hazard warning flashers. NOTE Regulations for using front fog lamps vary between different countries.

66 03 Your driving environment

Lighting

Rear fog lamp Hazard warning flashers Direction indicators/flashers

2 1

03 1 2 s 9 0 9 1 0 5 3603798s 3501901s 3 Button for rear fog lamp Hazard warning flashers Direction indicators/flashers

The rear fog lamp consists of one rear lamp Press the button to activate the hazard warn- Continuous flash sequence and can only be switched on in combination ing flashers. Both direction indicator symbols Move the stalk switch up or down to with main/dipped beam or the front fog in the combined instrument panel flash when position . lamps. the hazard warning flashers are in use. The stalk switch remains in its position and is Press the button for on/off. The light in the The hazard warning flashers are activated moved back manually, or automatically by button illuminates when the rear fog lamp is automatically when the car brakes so sud- the steering wheel movement. on. denly that the emergency brake lights (EBL) are activated and speed is below 30 km/h. The rear fog lamp indicator symbol on Short flash sequence They remain on when the car has stopped the combined instrument panel and the light Move the stalk switch up or down to and are deactivated automatically when the in the button illuminate when the rear fog position and release. The direction indi- car is driven off again or the button is de- lamp is switched on. cators flash three times. pressed. NOTE Direction indicator symbols See page 54. Regulations for using rear fog lamps vary between different countries.

67 03 Your driving environment

Lighting

Interior lighting Automatic lighting Rear roof lighting The passenger compartment lighting is Front roof lighting switched on and off automatically when button is in neutral position. The lighting comes on and remains on for 1 2 30 seconds if: 03 3 • the car is unlocked from the outside with the key or remote control • the engine is switched off and the ignition is in position 0 The lighting switches off when: 3501886s • the engine is started. Rear roof lighting

3501882s • the car is locked from outside The lamps are switched on or off by pressing Controls for reading lamps and front roof lighting The lighting comes on and remains on for each respective button. two minutes if one of the doors is open. Reading lamp, left-hand side, on/off Courtesy lighting/Step lighting* Reading lamp, right-hand side, on/off The passenger compartment lighting can be switched on and off manually within The courtesy lighting/step lighting is Interior lighting 30 minutes from when the car is unlocked. switched on/off automatically when one of The front reading lamps are controlled with the front doors is opened/closed. the and buttons in the roof console. If the lighting is switched on manually and the car is locked then it will be switched off auto- Glovebox lighting Switch has three positions for all passen- matically after one minute. ger compartment lighting: The glovebox lighting is switched on/off automatically when its door is opened/closed. • Off – right-hand side depressed, automatic lighting deactivated. • Neutral position – automatic lighting activated. • On – left-hand side depressed, passenger compartment lighting on.

68 03 Your driving environment

Lighting

Home safe lighting Approach lighting Adjusting headlamp pattern Some of the exterior lighting can be kept Approach lighting is switched on with the re- switched on to work as home safe lighting af- mote control key, see page 35, and is used ter the car has been locked. to switch on the car’s lighting at a distance. 1. Remove the remote control key from the When the function is activated with the re- ignition switch. mote control the parking lamps, indicator 03 2. Move the left-hand stalk switch toward lamps, door mirror lamps, number plate light- the steering wheel to the end position ing, inner roof lamps and step lighting are il- and release. luminated. 3. Get out of the car and lock the door. The time for which the approach lighting can The time for which the home safe lighting can be kept switched on can be set under Car be kept switched on can be set under Car settings Light settings Approach 3501890s settings Light settings Home safe lighting. For a description of the menu sys- Headlamp pattern, left-hand traffic lighting. For a description of the menu system, see page 94. tem, see page 94. 3501891s Headlamp pattern, right-hand traffic The headlamp pattern must be adjusted to avoid dazzling oncoming motorists and be set for either right or left-hand traffic. The

69 03 Your driving environment

Lighting

correct pattern will also better illuminate the The country in which the car is delivered de- verge. termines whether position is designed for right or left-hand traffic. Bi-Xenon and Active Bi-Xenon Example 1 headlamps* If a car that is delivered in Sweden shall be A driven in the UK then the headlamps should 03 be set to the adjusted position . Example 2 A car that is delivered in the UK is designed B for left-hand traffic and is driven there with the headlamps in normal position .

Halogen headlamps The headlamp pattern for halogen headlamps is readjusted by masking the head- 3501895s lamp lens. The headlamp pattern may not be Headlamp control for adjusting headlamp pat- as good. tern Masking the headlamps Normal position – the headlamp pattern is correct for the country in which the car 1. Copy the A and B templates for left-hand was delivered. drive cars or the C and D templates for right-hand drive cars with a scale of 1:2, Adapted position – designed for opposite for templates, see page 72. Use a photo- headlamp pattern. copier with a zoom function for example. 2. Transfer the template to a self-adhesive WARNING waterproof material and cut it out. Also The headlamps must be handled with ex- mark out the red dots. treme care due to the Xenon lamp being 3. Position the self-adhesive templates so supplied from a high-voltage unit. that the red dots correspond with the dots on the headlamp lenses that form reference points, see page 71.

70 03 Your driving environment

Lighting

Masking the halogen headlamps

Masking left-hand drive cars

Masking right-hand drive cars

71 03 Your driving environment

Lighting

Figures, halogen headlamps

03 A LHD RIGHT B LHD LEFT

D RHD LEFT

C RHD RIGHT 0300430s

72 03 Your driving environment

Wipers and washing

Windscreen wipers Continuous wiping Activate the rain sensor by pressing the The wipers sweep at normal button . The windscreen wipers make speed. one sweep. Press the stalk switch up for the wipers to 0 The wipers sweep at high speed. make an extra sweep.

Turn the thumbwheel upward for higher sen- 03 IMPORTANT sitivity and downward for lower sensitivity. (An extra sweep is made when the thum- 1 2 Use plenty of washer fluid when the wipers bwheel is turned upward.) are cleaning the windscreen. The windscreen must be wet when the windscreen Deactivating wipers are operating. Deactivate the rain sensor by pressing the 3603799s button or move the stalk switch down Windscreen wipers and windscreen washers Rain sensor* to another wiper program. Rain sensor on/off The rain sensor automatically starts the The rain sensor is automatically deactivated Thumbwheel sensitivity/frequency windscreen wipers based on how much wa- when the key is removed from the ignition ter it detects on the windscreen. The sensitiv- switch or five minutes after the ignition is Windscreen wipers off ity of the rain sensor can be adjusted using switched off. Move the stalk switch to the thumbwheel. 0 position 0 to switch off the wind- When the rain sensor is activated a light in IMPORTANT screen wipers. the button the rain sensor symbol is The windscreen wipers could start and be shown in the right-hand display in the com- Single sweep damaged in an automatic car wash. Deacti- bined instrument panel. vate the rain sensor while the car is running Raise the stalk switch and release Activating and setting the sensitivity or in ignition position I or II. The symbol in to make one sweep. the combined instrument panel and the light When activating the rain sensor, the car must in the button go out. Intermittent wiping be running or in ignition position I or II while Set the number of sweeps per the windscreen wiper stalk switch must be in time unit with the thumbwheel position 0. when intermittent wiping is selected.

73 03 Your driving environment

Wipers and washing

Headlamp washing and windscreen Heated washer nozzles* washing The washer nozzles are heated automatically in cold weather to prevent the washer fluid freezing solid.

High-pressure headlamp washing* 03 1 High-pressure headlamp washing consumes a large quantity of washer fluid. To save fluid, the headlamps are washed automatically every fifth time. 3603805s Washing function

Operation Move the stalk switch toward the steering wheel to start the windscreen and headlamp washers. After the stalk switch is released the wipers make several extra sweeps. The headlamps are washed alternately to prevent light intensity being reduced.

NOTE One headlamp is washed at a time.

74 03 Your driving environment

Windows, rearview and door mirrors

General Power windows WARNING Laminated glass 1 2 3 Make sure that children or other passengers The glass is reinforced which pro- are not in danger of becoming trapped in vides better protection against any way when closing the windows, in par- break-ins and improved sound in- ticular when the remote control key is used. sulation in the passenger compart- 03 ment. The windscreen and side win- WARNING dows* have laminated glass. If there are children in the car: Water and dirt-repellent coating* Remember to always switch off the supply The front side windows and/or door to the power windows by removing the re- s 0

9 mote control key if the driver leaves the car. 7

mirrors are treated with a coating that 3 0 6 improves the view in difficult weather condi- 3 tions. Maintenance, see page 210. Driver’s door control panel Door mirrors Switch for electric child safety locks* and In certain weather conditions, the function of disengaging rear power window buttons, the dirt-repellent coating is improved if the see page 31. door mirror defrosters are used. Rear window controls Heat the door mirrors: Front window controls • if they are covered with ice or snow • in heavy rain and dirty road conditions WARNING • if they are misted. Check that none of the rear seat passengers is in danger of becoming trapped in IMPORTANT any way caught when closing the windows from the driver’s door. Do not use a metal ice scraper to remove ice from the windows. The water and dirt- repellent coating could be damaged. Use the defroster to remove ice from the mirrors. An ice scraper could scratch the mirror glass!

75 03 Your driving environment

Windows, rearview and door mirrors

Operating Closing of the windows is stopped and the 1. Gently raise the front section of the button window is opened if anything prevents its to raise the window to its end position and movement. It is possible to force the pinch hold it there for one second. protection when closing has been interrupt- 2. Release the button briefly. ed, e.g. with ice, by continuously holding the 3. Raise the front section of the button 2 button up until the window is closed. The again for one second. 03 1 pinch protection is reactivated after a brief 1 pause. WARNING 2 Operating without auto Resetting must be carried out to ensure that Move one of the controls up/down gently. pinch protection works. The power windows move up/down as long

3603813s as the control is held in position. Operating the power windows Operating with auto Operating without auto Move one of the controls up/down to the end position and release it. The window runs au- Operating with auto tomatically to its end position. All power windows can be operated using the control panel in the driver’s door. Each Remote control and central locking but- control panel in the other doors can only con- tons trol its own respective power window. The All side windows can be opened/closed au- power windows can only be controlled with tomatically with the remote control or the one control panel at a time. central locking buttons: In order that the power windows can be used Press and hold the lock button until the win- the car must be in ignition position I or II. Af- dows start to open/close. To interrupt open- ter the car has been running the power win- ing/closing, press the lock button again. dows can be operated for several minutes even when the remote control key has been Resetting removed, but not however after the door has If the battery is disconnected then the func- been opened. tion for automatic opening must be reset so that it can work correctly.

76 03 Your driving environment

Windows, rearview and door mirrors

Door mirrors Retractable power door mirrors* press the L or R button. The door mirror re- The mirrors can be retracted for parking/driv- sets when reverse gear is disengaged. ing in narrow spaces: Automatic retraction when locking 1. Press down the L and R buttons at the When the car is locked/unlocked with the re- same time. mote control key the door mirrors are auto- 2. Release them after approximately one matically retracted/extended. 03 second. The mirrors automatically stop The function can be activated/deactivated in the fully retracted position. under Car settings Retract mirrors when Fold out the mirrors by pressing down the L locking. For a description of the menu sys- and R buttons at the same time. The mirrors tem, see page 94. automatically stop in the fully extended posi- Resetting to neutral

3905556s tion. Mirrors that have been moved out of position Door mirror controls Storing the position* by an external force must be electrically reset Adjusting The mirror positions are stored in the key to the neutral position for electric retracting/ 1. Press the L button for the left-hand door memory when the car has been locked with extending to work. mirror or the R button for the right-hand the remote control key. When the car is un- • Retract the mirrors with the L and R door mirror. The light in the button illumi- locked with the same remote control the mir- buttons. nates. rors and the driver’s seat adopt the stored • Fold them out again with the L and R 2. Adjust the position with the joystick in positions when the driver’s door is opened. buttons. the centre. The function can be activated/deactivated The mirrors are now reset in neutral position. 3. Press the L or R button again. The light under Car key memory Seat & mirror po- should no longer be on. sitions. For a description of the menu sys- Home safe and approach lighting tem, see page 94. The light on the door mirrors illuminates WARNING when approach lighting or home safe lighting Angling the door mirror when parking* The mirrors are the wide angle type for opti- is selected, see page 69. The door mirror can be angled down for the mum surveillance. Objects may appear further away than they actually are. driver to view the side of the road when parking for example. Engage reverse gear and

77 03 Your driving environment

Windows, rearview and door mirrors

Rear window and door mirror Interior rearview mirror defrosters

1 8803553s 3801191s

Use the defroster to quickly remove misting Manual dimming and ice from the rear window and the door Bright light from behind could be reflected in mirrors. the rearview mirror and dazzle the driver. Use Press the button once to start simultaneous dimming when disturbed by light from be- rear window and door mirror defrosting. The hind. light in the button indicates that the function is active. Defrosting is deactivated automati- Dipping cally and its duration is controlled by the out- Control for dimming side temperature. Normal position The rear window is demisted/defrosted auto- Dimmed position. matically if the car is started in an outside temperature lower than +7 C. Automatic dimming* Bright light from behind is automatically Defrosting can be selected under Climate dimmed by the rearview mirror. The control settings Auto. rear defroster. Select be- is not available in mirrors with automatic tween On or Off. dimming.

78 03 Your driving environment

Power sunroof*

General roof moves to maximum open position as Vertical opening long as the button is kept depressed. The sunroof controls are located in the roof panel. The sunroof can be opened vertically Closing and horizontally. Ignition position I or II is re- Close manually by pressing the control for- quired for the sunroof to be opened. ward to the point of resistance . The sunroof moves to closed position as long as the 03 Horizontal opening button is kept depressed.

WARNING 5 6 s

The sunroof’s pinch-protection function 9 5 5 2

only operates during automatic closing, not 0 3 manual. Make sure that hands are clear 8 when closing the sunroof. Vertical opening, raised at the rear edge

Close automatically by pressing the control Opening: open by pressing the rear edge 1 2 to position and then release it. of the control upward. 3 Closing: close by pressing the rear edge The power supply to the sunroof is switched 4 of the control downward.

8302558s off by removing the remote control key from Horizontal opening, backward/forward the ignition switch.

Opening, automatic WARNING Opening, manual If there are children in the car: Closing, manual Remember to always switch off the power Closing, automatic supply to the sunroof by removing the remote control key if the driver leaves the car. Opening For maximum sunroof opening, move the control back to position and release. Open manually by pulling the control backward to the point of resistance . The sun-

79 03 Your driving environment

Power sunroof*

Closing using the remote control key or Pinch protection central locking button The sunroof’s pinch protection function is triggered if it is blocked by an object during automatic closing. If blocked, the sunroof will stop and automatically open to the previous position. 03 8302556s

Press and hold the lock button for 2 seconds. The sunroof and windows close. The doors lock. To interrupt closing, press the lock button again.

WARNING If the sunroof is closed using the remote control key, check that no one is in danger of getting hands caught.

Sunscreen The sunroof features a manual, sliding interi- or sunscreen. The sunscreen slides back automatically when the sunroof is opened. Grip the handle and slide the screen forward to close it.

80 03 Your driving environment

Starting the engine

Petrol and diesel engines Steering lock WARNING The steering lock is deactivated when the re- 1. For cars with remote control key, insert Never remove the remote control key from mote control key is inserted into the ignition the remote control key into the ignition the ignition switch while driving or when the switch2 and activated when the remote con- switch. Gently push it forward until it is car is being towed. The steering lock could trol key is removed from the ignition switch. pulled in. be activated which would mean that the car 2. Hold the clutch pedal fully depressed1. cannot be steered. Never remove the re- Activate the steering lock when leaving the Depress the brake pedal in cars with mote control key with keyless drive* func- car to reduce the risk of car theft. 03 automatic gearbox. tion from the car while driving or during towing. 3. Press the START/STOP button and release the button. n The starter motor works until the engine has started, but for no longer than 10 seconds NOTE (diesel up to 60 seconds). If the engine has The idling speed can be noticeably higher not started after 10 seconds try again by than normal for certain engine types during holding in the START/STOP button until the cold starting. This is so that the emissions engine starts. system can reach normal operating temperature as quickly as possible, which minimis- WARNING es exhaust emissions and protects the environment. Always remove the remote control key from the ignition switch when leaving the car, especially if there are children in the car. Keyless drive* Follow steps 2–3 for starting petrol and diesel engines.

NOTE One precondition for starting the car is that the car’s remote control keys with the key- 2 On cars with Keyless drive* the steering lock less drive* function are located inside the is deactivated when the start button is 1 passenger compartment or the cargo area. pressed in for the first time. The steering lock If the car is moving then it is enough to press is activated when the engine is started and the START/STOP button to start the car. the driver’s door is opened.

81 03 Your driving environment

Starting the engine

Diesel particle filter (DPF) Start regeneration of the filter by driving the car until the engine reaches normal operating Diesel cars are equipped with a particle filter, temperature, preferably on a main road or which results in more efficient emission con- motorway. The car should then be driven for trol. The particles in the exhaust gases are approximately 20 minutes more. collected in the filter during normal driving. So-called "regeneration" is started in order to When regeneration is complete the warning 03 burn away the particles and empty the filter. text is cleared automatically. This requires the engine to have reached nor- Use the parking heater* in cold weather so mal operating temperature. that the engine reaches normal operating Regeneration of the filter takes place auto- temperature more quickly. matically at an interval of approximately 300–900 km depending on driving condi- IMPORTANT tions. Regeneration normally takes between 10 and 20 minutes. During this time fuel con- If the filter fills up with particles then it can be difficult to start the engine and the filter sumption may increase slightly. will be incapable of functioning. Then there is a risk that the filter will have to be re- Regeneration in cold weather placed. If the car is frequently driven short distances in cold weather then the engine does not reach normal operating temperature. This means that regeneration of the diesel particle filter does not take place and the filter is not emptied. When the filter has become approximately 80% full of particles, a yellow warning triangle illuminates on the dashboard, and a message is shown, Soot filter full. See manual is shown on the dashboard display.

82 03 Your driving environment

Starting the engine

Jump starting 5. Open the clips on the front cover of the comes into contact with the battery’s battery in your car and remove the positive terminal or the clamp connect- 4 cover, see page 187. ed to the red jump lead. 2 6. Connect the starter cable to the positive terminal on the battery in your car, located under a folding plastic cover. WARNING 03 7. Connect one clamp from the black jump The battery can generate oxyhydrogen gas, lead to the donor battery’s negative which is highly explosive. One spark, which + - terminal . can be generated if you connect a jump 8. Connect the other clamp to an earthing lead incorrectly, is sufficient to make the point, (right-hand engine mounting at battery explode. The battery contains sul- 1 3 the top, the outer screw head) . phuric acid, which can cause serious burns. If the acid comes into contact with eyes, 3100230s Check that the jump lead clamps are fixed securely so that there are no sparks during skin or clothing, flush with large quantities of water. If acid splashes into the eyes, seek If the battery is flat then the car can be start- the starting procedure. ed with current from another battery. medical attention immediately. The following points are recommended when IMPORTANT using a donor battery in order to avoid the Connect the start cable carefully to avoid risk of an explosion: short circuits with other components in the 1. Turn the car’s ignition to position 0, see engine compartment. page 59. 2. Ensure that the donor battery is 12 volt. 9. Start the engine of the "donor car". Let 3. If the donor battery is in another car, the engine run a few minutes at a speed switch off the donor car’s engine in the slightly higher than idle (1500 rpm). other car and ensure that the cars do 10.Start the engine of the car with the flat not touch one another. battery. Do not touch the crocodile clips 4. Connect the red jump lead to the posi- during the start procedure. There is a tive terminal on the donor battery . risk of sparks forming. 11.Remove the jump leads, first the black and then the red. Make sure that none of the clamps on the black jump lead

83 03 Your driving environment

Gearboxes

Manual gearbox Reverse gear inhibitor Automatic gearbox

03 4304161s 4304160s 4304157s Only engage reverse gear when the car is Depress the clutch pedal fully during each stationary. gear change. Take your foot off the clutch Parking position (P) pedal between gear changes. Follow the Select P when starting the engine or when shifting pattern indicated. the car is parked. The brake pedal must be depressed to disengage the gear selector For the best possible fuel economy, use the from the P position. The gearbox is mechani- highest gear possible as often as possible. cally blocked when P is engaged. Always apply the parking brake when parking the car or press the button if the car is equipped with electric parking brake, see page 89.

IMPORTANT The car must be stationary when position P is selected.

84 03 Your driving environment

Gearboxes

Reverse (R) Safety functions The gear selector can be moved freely be- The car must be stationary when position R When kickdown is activated the car can tween N and D. Other positions are locked is selected. change one or more gears at a time depend- with a latch that is released with the inhibitor ing on engine speed. The car changes up button on the gear selector. The gear selec- Neutral position (N) when the engine reaches its maximum speed tor can be moved between R, N and D after No gear is engaged and the engine can be in order to prevent damage to the engine. pressing the inhibitor button. started. Apply the parking brake if the car is Geartronic automatically shifts down if the 03 Automatic gear selector inhibitor stationary with the gear selector in position driver allows the speed to decrease lower The automatic gearbox has special safety N. than a level suitable for the selected gear, in systems: order to avoid jerking and stalling. Drive (D) Keylock D is the normal driving position. Shifting up Geartronic does not permit downshifting/ kickdown which would result in an engine To remove the remote control key from the and down takes place automatically based ignition switch, the gear selector must be in on the level of acceleration and speed. The speed high enough to damage the engine. Nothing happens if the driver tries to shift the P position. The remote control key is car must be stationary when the gear selec- locked in all other positions. tor is moved to position D from position R. down in this way at high engine speed. The original gear remains engaged. Parking position (P) Geartronic – manual gear positions Stationary car with engine running: Mechanical gear selector inhibitor To move from the drive D to a manual posi- Keep your foot on the brake pedal when tion, move the gear selector to position M. To moving the gear selector to another position. go from position M to the automatic driving position D, move the selector to position D. Electric gear inhibitor – Shiftlock Park- ing position (P) Manual gear position, M, can be selected at To be able to move the gear selector from P any time during the journey. Then move the to other gear positions, the brake pedal must gear selector to – to change down a gear. be depressed and the ignition must be in po- The car engine-brakes and the accelerator sition II, see page 81. pedal is released. Move the gear selector to + to change up a gear. Shiftlock – Neutral (N) If the gear selector is in the N position and The selected gear is indicated on the com- 4304164s the car has been stationary for at least bined instrument panel, see page 54.

85 03 Your driving environment

Gearboxes

3 seconds (irrespective of whether the en- Fully insert the key blade. Press the key All Wheel Drive – AWD* gine is running) then the gear selector is blade down and keep it held down. Move All Wheel Drive is always engaged. All Wheel locked. the gear selector from the P position. For Drive means that the car is driving all four information on the key blade, see wheels at the same time. The power is auto- To be able to move the gear selector from N page 34. to another gear position, the brake pedal matically distributed between the front and must be depressed and the ignition must be rear wheels. An electronically controlled 03 in position II, see page 81. clutch system distributes the power to the wheels that have the best grip on the current Deactivating the automatic gear road surface. This provides the best traction selector inhibitor and prevents wheel spin. Under normal driving conditions, the majority of power is transmitted to the front wheels. All Wheel Drive improves driving safety in rain, snow and icy conditions.

2 4900001s

If the car cannot be driven, e.g. due to a flat battery, the gear selector must be moved from the P position so that the car can be moved. Lift away the rubber mat on the floor behind the centre console and open the hatch.

86 03 Your driving environment

Foot brake

General swerve to avoid a hazard for example. Vibra- NOTE tion may be felt in the brake pedal when this The car is equipped with two brake circuits. If is engaged and this is normal. When EBA is activated the brake pedal low- one brake circuit is damaged then this will ers slightly more than usual, depress (hold) mean that the brakes engage at a deeper lev- After the engine has been started and the car the brake pedal as long as necessary. If the el and harder pressure on the pedal is need- has reached 20 km/h there is a short auto- brake pedal is released then all braking ed to produce the normal braking effect. matic test of the ABS system. The test may ceases. be felt as pulses in the brake pedal. 03 The driver’s brake pedal pressure is reinforced by a brake servo. Cleaning the brake discs Coatings of dirt and water on the brake discs WARNING may result in delayed brake function. This The brake servo only works when the en- delay is minimised by cleaning the brake lin- gine is running. ings.

If the brake is used when the engine is Manual cleaning is advisable with wet road switched off then the pedal will feel stiff and surfaces, prior to long-stay parking and after more force must be used to brake the car. the car has been washed. Carry this out by braking gently during a short period while en In very hilly terrain or when driving with a route. heavy load the brakes can be relieved by using engine braking. Engine braking is most Emergency Brake Assistance* efficiently used if the same gear is used Emergency Brake Assistance (EBA) helps to downhill as up. increase brake force and so reduce braking For more general information on heavy loads distance. The EBA system detects the driv- on the car, see page 218. er’s braking style and increases brake force as necessary. The brake force can be rein- Anti-lock braking system forced up to the level when the ABS system The car is equipped with ABS (Anti-lock is engaged. The EBA function is interrupted Braking System) that prevents the wheels when the pressure on the brake pedal is re- from locking during braking. This means the duced. ability to steer is maintained and it is easier to

87 03 Your driving environment

Foot brake

Symbols in the combined instrument panel Symbol Specification Constant glow – Check the brake fluid level. If the level is low, fill with brake fluid and check for the 03 cause of the brake fluid loss. Constant glow for two seconds when the engine is started – There was a fault in the brake system’s ABS function when the engine was last running.

WARNING

If and illuminate at the same time then a fault may have arisen in the brake system. If the level in the brake fluid reservoir is normal at this stage, drive carefully to the nearest authorised Volvo workshop and have the brake system checked. If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid. The reason for the loss of brake fluid must be investigated.

88 03 Your driving environment

Parking brake

Parking brake, manual 5. When parking the vehicle always put the Parking brake, electric* gear selector in position 1 (for manual An electric parking brake has the same appli- transmission) or P (for automatic trans- cations as a manual parking brake, e.g. when mission). starting uphill. 2 Parking on a hill Function If the car is parked facing uphill; turn the 03 wheels away from the kerb. A faint electric motor noise can be heard when the parking brake is being applied. The If the car is parked facing downhill, turn the noise can also be heard during the automatic wheels towards the kerb. function checking of the parking brake. 1 How to release the parking brake If the car is stationary when the parking brake 5500134s 1. Press the foot brake pedal down firmly. is applied then it only acts on the rear wheels. The parking brake is located far left . If it is applied when the car is moving then 2. Pull the control . the normal foot brake is used, i.e. the brake NOTE acts on all four wheels. Brake function changes over to the rear wheels when the car The warning symbol in the combined instrument panel illuminates irrespective of how is almost stationary. hard the parking brake pedal is depressed. Low battery voltage If the battery voltage is too low then the park- How to apply the parking brake ing brake can neither be released nor ap- 1. Press the foot brake pedal down firmly. plied. Connect a donor battery if the battery 2. Depress the parking brake pedal voltage is too low, see page 83. firmly as far as possible. 3. Release the foot brake pedal and make sure that the car is at a standstill position. 4. If the vehicle rolls, the parking brake pedal must be depressed further.

89 03 Your driving environment

Parking brake

How to apply the parking brake NOTE Cars with manual gearbox Releasing manually In the event of emergency braking at speeds above 10 km/h a signal sounds 1. Insert the remote control key in the ignition during the braking procedure. switch. 2. Depress the brake pedal firmly.

03 Parking on a hill 3. Pull the control. If the car is parked facing uphill; turn the wheels away from the kerb. NOTE If the car is parked facing downhill, turn the The parking brake can also be released wheels towards the kerb. manually by depressing the clutch pedal instead of the brake pedal. Volvo recom-

5500133s mends the use of the brake pedal. Parking brake control How to release the parking brake 1. Press the foot brake pedal down firmly. Releasing automatically 2. Press the control. 1. Start the engine. 3. Release the foot brake pedal and make 2. Ease up the clutch and depress the sure that the car is at a standstill posi- accelerator. tion. 4. When parking the vehicle always put the IMPORTANT gear selector in position 1 (for manual transmission) or P (for automatic trans- The parking brake can also be released au- mission). tomatically when the gear selector is in neutral position if the engine is running. The symbol in the combined instrument

panel flashes until the parking brake is fully 5500132s applied. When the symbol illuminates the Parking brake control parking brake is applied. In an emergency the parking brake can be applied when the vehicle is moving by holding in the control. When the control is released or the accelerator pedal is depressed the braking is interrupted.

90 03 Your driving environment

Parking brake

Cars with automatic gearbox Cars with Keyless drive* function Parking brake not fully released – A fault is Releasing manually Release manually by pressing the START/ preventing the parking brake from being re- 1. Insert the remote control key in the ignition STOP button, then depress the brake or leased. Contact an authorised Volvo work- switch. clutch pedal and pull the control. shop. A warning signal sounds if you pull away with this error message. 2. Depress the brake pedal firmly. Symbols 3. Pull the control. Parking brake not applied – A fault is pre- Symbol Specification venting the parking brake from being applied. 03 Releasing automatically Try to apply and release. Contact a Volvo 1. Start the engine. Read the message on the infor- (P)! mation display workshop if the message remains. 2. Put on the seatbelt. A flashing symbol indicates The message is also illuminated on cars with 3. Move the gear selector to position D that the parking brake is manual gearbox when the car is driven at low or R and depress the accelerator. applied. speed with the door open in order to alert the If the symbol flashes in any driver that the parking brake may have been NOTE other situation then this means that a fault has arisen. Read the unintentionally disengaged. For safety reasons, the parking brake is only message on the information Parking brake Service required – A fault has released automatically if the engine is run- display. ning and the driver is wearing a seatbelt. arisen. Contact a Volvo workshop if the fault The parking brake is released immediately remains. on cars with automatic gearbox when the Messages accelerator pedal is depressed and the gear If the car has to be parked before the fault selector is in position D or R. has been rectified then the wheels must be turned as if parking on a hill and the gear Heavy load uphill selector must be in position 1 (manual A heavy load, such as a trailer, can cause the gearbox) or P (automatic gearbox). car to roll backward when the parking brake is released automatically on a steep incline. Replacing the brake linings Avoid this by holding in the control while pull- The rear brake linings must be replaced by ing away. Release the control when the en- an authorised Volvo workshop due to the de- gine engages the traction point. sign of the electric parking brake. G016166

91 Menus and messages ...... 94 Climate control...... 99 Audio system ...... 109 Trip computer ...... 118 Compass*...... 119 Stability and traction control system ...... 120 Adapting driving characteristics ...... 121 Cruise control* ...... 122 Adaptive cruise control* ...... 123 Collision warning system with brake support* ...... 127 Parking assistance*...... 130 Blind Spot Information System, BLIS* ...... 132 Comfort inside the passenger compartment...... 135 Bluetooth handsfree* ...... 140 Built-in phone* ...... 145

92 COMFORT AND DRIVING PLEASURE 04 04 Comfort and driving pleasure

Menus and messages

Centre console EXIT – leads back one step in the menu settings, which is on the assumption that the structure. A long press leads out from the following is carried out beforehand: Some functions are controlled from the cen- menu system. tre console via the menu system or via the 1. Press MENU. keypad in the steering wheel. Each function Steering wheel keypad 2. Scroll to Menu and press ENTER. is described under its respective section. 3. Scroll to Submenu and press ENTER. The current menu level is shown at the top The navigation button can be used instead of right of the centre console’s display. ENTER and EXIT when navigating the menu 1 hierarchy. The right-hand arrow is equal to 2 Centre console controls ENTER and the left-hand arrow to EXIT. 3 04 The menu options are numbered and can also be selected directly with the numerical keypad (only 1 – 9). 3905597s ENTER* 3 EXIT* 1 4 Navigation buttons – up/down. 2 If the steering wheel keypad has ENTER and 3905554s EXIT then the buttons to have the Centre console with information display and controls for menus. same function as in the centre console.

Navigation button – scrolls and selects Search paths among menu options Access to some functions is provided direct- ENTER – selects menu options ly via the function buttons and some are MENU – leads to the menu system reached via the menu system. Search paths to the menu system functions are stated in the form: Car settings Lock

94 04 Comfort and driving pleasure

Menus and messages

Menu overview Main menu AM Main menu CD The phone and audio sources have different Audio settings1 Random main menus. The following menus are includ- Sound stage Off ed in all main menus: Equalizer, front Folder2 Car key memory Equalizer, rear Disc2 Seat & mirror positions* 3 Auto. volume control Single disc 3 Car settings Reset the audio settings All discs Fold mirr. when locking* CD settings Collision warn. settings* Main menu FM 04 FM settings Disc text* Information News News Light settings TP (Traffic information) TP (Traffic information) Lock settings Radio text Audio settings Parking camera settings* PTY (Programme type) Main menu AUX Steering force level* Advanced radio settings Volume, AUX input Climate control settings Audio settings Audio settings Automatic blower adjust Auto. rear defroster Recirculation timer Reset climate settings

2 Only in systems where it is possible to playback audio files in MP3 and WMA formats. 1 The menu option for audio settings is available in all audio sources. 3 Only in systems with CD changer.

95 04 Comfort and driving pleasure

Menus and messages

Main menu Bluetooth Main menu Built-in phone Voice mail number Call list Last 10 missed calls Diversions Last 10 missed calls Last 10 received calls Phone settings Last 10 received calls Last 10 dialled calls Network selection Last 10 dialled calls Phone book SIM security Erase list Search Edit PIN code Call duration Copy fr. mobile phone Sounds and volume Bluetooth* Phone book IDIS 04 Connect the phone New contact Reset Phone settings Change phone Search Remove phone Copy all Phone settings Erase SIM Call options Erase phone Sounds and volume Memory status Synchronize phone book Messages Read Write new Message settings Call options Send my number Call waiting Automatic answer

96 04 Comfort and driving pleasure

Menus and messages

Combined instrument panel Menu overview1 Message To empty fuel tank Average Current consumption

1 2 3 Average speed Lane departure warning Tyre pressure Calibration Current speed 04 o Park heat timer AM/PM P _3 C 3801153s 3603794s Information display and controls for menus Park vent timer AM/PM Text message in the information display. READ – access to message list and Park timer mode When a warning, information or indicator message confirmation. Direct start Park heat symbol illuminates, a corresponding mes- Thumbwheel – browse between menu sage appears on the information display. An Direct start Park el.heat options. error message is stored in a memory list until RESET – reset the active function. Used Direct start Park vent the fault is rectified. in certain cases to select/activate a func- Additional heat auto Press READ to acknowledge and browse tion, see the explanation under each re- between the messages. spective function. Rest heat start The menus shown on the information dis- DSTC NOTE plays in the combined instrument panel are controlled with the left-hand stalk switch. If a warning message appears while you are using the trip computer, the message must The menus shown depend on ignition posi- be read (press READ) before the previous tion. If a message appears then this must be activity can be resumed. acknowledged with READ for the menus to be shown. 1 Certain menu options are optional

97 04 Comfort and driving pleasure

Menus and messages

Message Specification Message Specification

Stop safely Stop and switch off the Time for regular Time for regular service engine. Serious risk of service at an authorised Volvo damage. Contact an workshop. The timing is authorised Volvo determined by the workshop. number of kilometres driven, number of Stopping the Stop and switch off the months since the last engine engine. Serious risk of service, engine running time and oil grade. 04 damage. Contact an authorised Volvo workshop. Maintenance If the service intervals overdue are not followed then the Service urgent Have the car checked by warranty does not cover an authorised Volvo any damaged parts. workshop immediately. Contact an authorised Volvo workshop for service. Service required Have the car checked by an authorised Volvo workshop as soon as Temporarily OFF A function has been possible. temporarily switched off and is reset automatically while driving or See manual Read the owner’s after starting again. manual. Power save The audio system is mode switched off to save energy. Charge the battery.

98 04 Comfort and driving pleasure

Climate control

General • The humidity sensor* is located in the the air conditioning is temporarily shut-off. interior rearview mirror. There may be a temporary increase in tem- Air conditioning perature. NOTE The car is equipped with Electronic Climate Condensation Control (ECC). The climate control system Do not cover or block the sensors with In warm weather, condensation from the air cools or heats as well as dehumidifies the air clothing or other objects. conditioning may drip under the car. This is in the passenger compartment. normal. Side windows and sunroof NOTE To ensure that the air conditioning works op- Ice and snow The air conditioning can be switched off, timally, the side windows, and sunroof if ap- Remove ice and snow from the climate con- but to ensure the best possible climate propriate, should be closed. trol system air intake (the grille between the 04 comfort in the passenger compartment and bonnet and the windscreen). to prevent the windows from misting, it Misting windows should always be on. Remove misting on the insides of the win- Fault tracing and repair dows by primarily using the defroster func- Entrust fault tracing and repair of the climate Actual temperature tion. control system to an authorised Volvo workshop only. The temperature you select corresponds to To reduce the risk of misting, clean the win- the physical experience with reference to dows with a normal window cleaning agent. factors such as air speed, humidity and solar Refrigerant radiation in and around the car. The climate control system contains R134a Vents in the parcel shelf refrigerant. This refrigerant contains no chlo- rine, which means that it is harmless to the Sensor location NOTE • The sun sensor is located on the top side ozone layer. Have an authorised Volvo work- of the dashboard. To avoid misting, do not block the vents fur- shop carry out the filling/changing of refriger- thest back on the parcel shelf with clothing ant. • The temperature sensor for the passenger or other objects. compartment is located below the climate Total airing function control panel. The function opens/closes all side windows Temporary shut-off of the air condi- • The outside temperature sensor is located simultaneously and can be used for example tioning on the door mirror. to quickly air the car during hot weather, see When the engine requires full power, e.g. for page 35. full acceleration or driving uphill with a trailer,

99 04 Comfort and driving pleasure

Climate control

Passenger compartment filter es until the car is four years old. Then the Menu settings All air entering the car’s passenger compart- enhanced fan function is disengaged It is possible to change the default settings ment is cleaned with a filter. This must be re- completely as the fan no longer has any for three of the climate control system’s func- placed at regular intervals. Follow the Volvo functionality with regard to the cleanliness tions via the centre console, see page 94: Service Programme for the recommended of the passenger compartment air. • Fan speed in automatic mode, see • Interior Air Quality System (IAQS). A fully replacement intervals. If the car is used in a page 103. severely contaminated environment, it may automatic system that cleans the air in the • Recirculation timer for passenger com- be necessary to replace the filter more often. passenger compartment from contaminants such as particles, hydrocarbons, partment air, see page 104. NOTE nitrous oxides and ground-level ozone. • Automatic rear window defrosting, see • Use of tested materials in the interior page 78. 04 There are different types of passenger com- equipment. The materials have been de- All climate control system functions are set to partment filter. Make sure that the correct veloped in order to minimise the quantity original position with RESET via the display. filter is fitted. of dust in the passenger compartment and they contribute to making the passenger Clean Zone Interior Package (CZIP)* compartment easier to keep clean. The This option keeps the passenger compart- carpets in both the passenger compartment and the cargo area are removable ment clear of allergy and asthma inducing and easy to remove and clean. Use clean- substances. For more information, see the ing agents and car care products recom- Clean Zone Interior brochure included when mended by Volvo, see page 211. the car is purchased. The following is included: NOTE • An enhanced fan function that means that In cars with the Clean Zone Interior Pack- the fan starts when the car is opened with age the IAQS air filter must be replaced eve- the remote control key. The fan fills the ry 15 000 km or once per year. In cars passenger compartment with fresh air. without the Clean Zone Interior Package the The function starts when required and is IAQS air filter must be replaced at the nor- disengaged automatically after a time or mal service. when one of the passenger compartment doors is opened. The time interval during which the fan operates gradually decreas-

100 04 Comfort and driving pleasure

Climate control

Air distribution Air vents in the dashboard Air vents in the door pillars

A D D C C C C D D B A B 04 8704343s 8704365s 8704363s The incoming air is divided between Open Open 20 different vents in the passenger compart- Closed Closed ment. Lateral airflow Lateral airflow Air distribution is fully automatic in AUTO Vertical airflow Vertical airflow mode. Aim the outer vents at the side windows to Aim the vents at the windows to remove If necessary it can be controlled manually, remove misting. misting. see page 105. A certain air flow always comes from the Aim the vents into the passenger compart- vents in order to maintain a good climate in ment to maintain a comfortable climate in the the passenger compartment. The vents adja- rear seat. cent to the steering wheel can be used to Remember that small children may be sensi- warm up hands in cold weather. tive to air flows and draughts.

101 04 Comfort and driving pleasure

Climate control

Electronic climate control, ECC Ventilated front seats* Press the button four times to switch off the The ventilation system consists of fans in the function – no lamps illuminate. seats and backrests that draw air through the 1 2 3 4 5 6 7 seat upholstery. The cooling effect increases NOTE the cooler the passenger compartment air The seat ventilation should be used careful- becomes. ly by people sensitive to draughts. Comfort The ventilation is controlled from the ECC level one is recommended for long-term use. which takes into account the seat tempera- 13 8 ture, solar radiation and outside temperature. The ventilation can be used at the same time IMPORTANT 04 12 11 10 9 as seat heating. For example, the function The seat ventilation cannot be started when

8704366s can be used to dry damp from clothing. passenger compartment temperature is less than 5 C. This is to avoid chilling any- Ventilated front seats*, left-hand side The ventilation system can be activated one sitting in the seat. Fan when the engine is running. There are three Heated front seats, left-hand side comfort levels that produce different cooling and dehumidification outputs: Fan Air distribution Turn the knob to increase or • Comfort level three: press the button once Heated front seats, right-hand side decrease fan speed. If for maximum output – three lamps illumi- AUTO is selected then fan AUTO nate. speed is regulated auto- Ventilated front seats*, right-hand side • Comfort level two: press the button twice matically. The previously for a lower output – two lamps illuminate. Temperature control, right-hand side 8704352s set fan speed is disen- A/C – On/Off • Comfort level one: press the button three gaged. times for the lowest output – one lamp Rear window and door mirror defrosters, illuminates. see page 78 NOTE Defroster If the fan is fully disengaged the air condi- Recirculation/Air quality system tioning is not engaged. Temperature control, left-hand side

102 04 Comfort and driving pleasure

Climate control

Heated seats* Air distribution For a description of the menu system, see Front seats The figure consists of three page 94. •Press the button once buttons. When the buttons for the highest heat level are pressed a lamp in front Temperature control – three lamps illuminate. of the respective part of the The temperatures on the •Press the button twice figure illuminates and driver and passenger sides for a lower heat level – 8704361s shows which air distribution can be set independently. is selected, see page 105. When the car is started, the 8704369s two lamps illuminate. most recent setting is re- •Press the button three times for the lowest heat Auto 8704362s sumed. level – one lamp illuminates. The function automatically 04 regulates temperature, air • Press the button four times to switch off the heat – no lamps illuminate. conditioning, fan speed, re- NOTE circulation, and air distribu- Rear seats tion. If you select one or Heating or cooling cannot be hastened by selecting a higher/lower temperature than 8704348s more manual functions, the the actual temperature required. other functions continue to be controlled automatically. The air quality sensor is engaged and all manual settings A/C – ON/OFF are switched off when AUTO is pressed. The The air conditioning is con- display shows AUTO CLIMATE. trolled automatically by the ON Fan speed in automatic mode can be set un- system when the lamp is on. This way, incoming der Climate settings Automatic blower air is sufficiently cooled and adjust. Choose between Low, Normal or High. 8704344s dehumidified. When the

3603819s OFF lamp is on, the air conditioning is always disengaged. Other func- Heat control takes place in the same way as NOTE tions are still controlled automatically. When for the front seat. Selecting the lowest fan speed slightly in- defroster is selected, the air conditioning creases the risk of misting windows. system is set for maximum dehumidification.

103 04 Comfort and driving pleasure

Climate control

Defroster circulated, i.e. no outside air is taken into the Activating the air quality sensor. Used to quickly remove car when this function is activated. If the air Switch between the three misting and ice from the in the car recirculates for too long, there is a functions by pressing the windscreen and side win- risk of misting on the insides of the windows. button repeatedly. dows. Air flows to the win- Timer dows at high fan speed. With the timer function activated the system 8704346s 8704354s The light in the defroster will exit manually activated recirculation button illuminates when the mode according to a time that depends on • The left-hand orange lamp illuminates – function is active. the outside temperature. This reduces the the air quality sensor is disengaged. The following also takes place in order to risk of ice, misting and bad air. Activate/de- • The centre green lamp illuminates – recir- 04 provide maximum dehumidification in the activate the function under Climate control culation not engaged, providing it is not passenger compartment: settings Recirculation timer. For a de- required for cooling in hot weather. scription of the menu system, see page 94. • the air conditioning (A/C) is engaged auto- • The right-hand orange lamp illuminates – matically recirculation is engaged. NOTE • recirculation is automatically disengaged. NOTE When the defroster function is switched off When Defroster is selected, recirculation is always deactivated. the climate control system returns to the pre- The air quality sensor should always be en- vious settings. gaged in order to obtain the best air in the Air quality system* passenger compartment. Recirculation is limited in cold weather to The air quality system sepa- Recirculation/Air quality system avoid misting. rates gases and particles to Recirculation If the insides of the windows start misting reduce the levels of odours up, disengage the air quality sensor, and When recirculation is en- and pollution in the passen- the defroster function for the front, side and gaged the right-hand or- ger compartment. If the rear windows should also be used to demist ange light in the button illu- the windows. 8704345s outside air is contaminated minates. The function is se- then the air intake is closed lected to shut out bad air, and the air is recirculated. When the AUTO 8704347s exhaust gases etc. from the button is depressed the air quality sensor is passenger compartment. always engaged. The air in the passenger compartment is re-

104 04 Comfort and driving pleasure

Climate control

Air distribution table

Air distribution Use Air distribution Use Air to windows. Some air To remove ice and misting Air to the floor and To ensure comfortable flows from the air vents. quickly. windows. Some air flows conditions and good The air is not recirculated. from the dashboard air demisting in cold or Air conditioning is always vents. humid weather. engaged. 8704358s 8704354s Air to windscreen and To prevent misting and Air to floor and from In sunny weather with side windows. Some air icing in a cold and humid dashboard air vents. cool outside tempera- 04 flows from the air vents. climate, (not at too low tures. fan speed to enable this). 8704359s 8704355s Airflow to windows and To ensure good comfort in Air to floor. Some air flows To warm or cool the feet. from dashboard air vents. warm, dry weather. to the dashboard air vents and windows. 8704360s 8704356s Airflow to the head and To ensure efficient cooling Airflow to windows, from To cool the feet or provide chest from the dashboard in warm weather. dashboard air vents and warmer air to the upper air vents. to the floor. body in cold weather or hot, dry weather. 8704353s 8704358s

105 04 Comfort and driving pleasure

Climate control

Fuel-driven parking heater* IMPORTANT WARNING! ACHTUNG! General information about the parking AVERTISSEMENT! Repeated use of the parking heater combined with short journeys may discharge heater the battery and impair starting. If the park- The parking heater can be started immedi- ing heater is used regularly, the car must be ately or set using the timer. Here, start time driven for the same time as the parking refers to the time the car is heated and ready. heater is run to ensure that the alternator has time to correspondingly charge the bat- The car’s electronic system calculates when tery. heating should be started based on the outside temperature. The heater is not run if the 04 outdoor temperature exceeds 15 C. At tem- 2303544s peratures from –10 C and below, the maximum running time of the parking heater is WARNING 50 minutes. When the parking heater is running, Park heat ON is shown on the informa- Fuel which spills out can be ignited. Switch of the parking heater before starting to refu- tion display. el. Check the information display to see that the parking heater is switched off. WARNING The car must be outdoors when the parking Parking on a hill heater is used. If the car is parked on a steep hill, the front of the car should point downhill to ensure that NOTE there is a supply of fuel to the parking heater.

When the parking heater is active there may Battery and fuel be smoke from the right-hand wheel housing which is perfectly normal. If the battery has insufficient charge or the fuel level is too low, the parking heater will be switched off automatically. A message appears on the information display. Confirm the message by pressing the READ button, see page 107.

106 04 Comfort and driving pleasure

Climate control

Operation Clock/timer 4. Touch RESET to move to the flashing If the car clock is reset the timer settings are minutes setting. deleted. 5. Scroll with the thumbwheel to the minutes required. Direct start/shutdown 6. Touch RESET to confirm the setting. 1. Use the thumbwheel to scroll to Direct 1 2 3 7. Press RESET to activate the timer. After start Park heat. setting PM a second start time can be 2. Press RESET to switch between ON and programmed for AM. Access this with OFF. the thumbwheel . Set the alternative With direct start the parking heater will be ac- start time in the same way as for AM. tivated for 50 minutes. Heating of the pas- 04 senger compartment will begin as soon as 8904102s the engine coolant has reached a tempera- READ button ture of 38 ºC. Thumbwheel RESET button NOTE For more information on the information dis- The car can be started and driven while the play and READ, see page 97. parking heater is still running.

Message in the information display Setting the timer When the timer settings or direct start are ac- It is only possible to set times for the follow- tivated, the information symbol illuminates on ing 24 hours. the combined instrument panel and an ex- 1. Scroll with the thumbwheel to Park planatory text appears in the information dis- heat timer. play. The display also indicates which timer is active when the driver removes the remote 2. Touch RESET to move to the flashing control key from the keyhole to leave the car. hours setting. 3. Scroll with the thumbwheel to the hours required.

107 04 Comfort and driving pleasure

Climate control

Additional heater (diesel)* Auto mode or shutdown The additional heater can be switched off for short distances to avoid discharging the battery. 1. Use the thumbwheel to scroll to Addi- tional heat auto. 1 2 3 2. Press RESET to switch between ON and OFF.

04 8904102s

READ button Thumbwheel RESET button The additional heater may be required for achieving the correct temperature in the passenger compartment during cold weather. The additional heater starts automatically when extra heat is required and the engine is running. It is switched off automatically when the correct temperature is reached or when the engine is switched off.

NOTE When the additional heater is active there may be smoke from the right-hand wheel housing which is perfectly normal.

108 04 Comfort and driving pleasure

Audio system

General Overview Steering wheel keypad The audio system can be equipped with different options and different versions. There are three system versions: Performance, 2 3 1 1 High Performance and Premium Sound. The 2 system version is shown in the display when 4 the audio system is started. 3 Dolby Surround Pro Logic II and the symbol are trademarks of Dolby Laboratories Licensing Corporation. 04 The Dolby Surround Pro Logic II System is 4 3905555s manufactured under license from 3905596s Dolby Laboratories Licensing Corporation. Input for external audio source (AUX) Confirm selection in menu system, ac- Steering wheel keypad cept call. Remote control key and ignition Centre console control panel Lead up in menu system. Interrupt cur- positions rent function. End/refuse calls, clear en- The audio system can be used without the Control panel with headphones socket* tered characters. remote control key in the ignition switch for Volume 15 minutes at a time. A short press scrolls between CD tracks NOTE or preset radio stations. A long press fast-winds CD tracks or searches radio Remove the remote control key from the ig- stations automatically. nition switch if the audio system is used when the engine is switched off. This is to avoid discharging the battery unnecessarily.

If the audio system is active when the engine is switched off then it is activated automatically the next time the engine is started.

109 04 Comfort and driving pleasure

Audio system

Rear control panel with headphones Scroll/search forward and backward Menus and MY KEY socket* Short presses on are used to scroll be- Some functions are controlled from the menu Headphones with an impedance of tween CD tracks or preset radio stations. system in the centre console. For more infor- 16–32 ohm and sensitivity of 102 dB or high- Long presses are used to fast-wind CD mation on menus, see page 94. For informa- er are recommended for best sound repro- tracks or to search for radio stations auto- tion on the audio system’s functions together duction. matically. with Bluetooth™ handsfree or phone, see page 142. Limitations 1 2 1 • The audio source (FM, AM, CD etc.) Save favourite functions with MY KEY. played back in the speakers cannot be 04 controlled from the rear control panel. • RDS messages may not appear if the radio is playing back in the headphones while another audio source is playing back in the speakers. 3 4 3 3905594s

Volume

Scroll/search forward and backward G010272 Audio source, activating 1. Select the function in the menu to be Headphones sockets (3.5 mm) stored. Only one selection of functions can be stored. Activating/deactivating 2. Hold MY KEY depressed for more than The control panel is activated with MODE two seconds. when the audio system is active. Deactiva- 3. Activate the stored function with a short tion is automatic when the audio system is press on MY KEY. deactivated or with a long press on MODE.

110 04 Comfort and driving pleasure

Audio system

The following functions can be stored with MY KEY:

CD/CD changer • Random (CD changer) • News • TP • Disc text

04 FM • News • TP • Radio text • Search PTY • Show PTY text

SIRIUS • Add music track to music track memory • Direct to channel shortcut • Music track search

AUDIO SETTINGS • Sound setting • Auto. volume control

111 04 Comfort and driving pleasure

Audio system

Audio functions low, medium or high. Select the level under • Treble – Treble level. Audio settings Auto volume control. • Fader – Balance between the front and rear speakers. External audio source audio volume • Balance – Balance between the right and The AUX input can be used for connecting an left-hand speakers. MP3 player for example, see page 109. 1 • Surround* – Surround settings. Under Surround 3 channel stereo or 2 NOTE 5 Dolby pro logic II can be activated by select- The audio quality may be impaired if the ing 3-ch or Dpl2 respectively. This enables player is charged while the audio system is the following options: 04 in AUX mode. In which case, avoid charging 1 4 3 the player. • Centre level – Level for centre speaker. G010266 • Surround level1 – Level for surround. Centre console, controls for audio functions Sometimes the AUX external audio source Equalizer Internal audio sources: AM, FM and CD can be heard at a different volume to the in- Sound levels for different frequencies can be ternal audio sources. If the audio volume of 2 External audio source. For connection, adjusted separately using the equalizer . see page 109 the external audio source is too high then the sound quality can be impaired. Prevent this 1. Go to Audio settings and select Pushbutton and knob controls for adjust- by adjusting the input volume of the AUX in- Equalizer Front or Equalizer Rear. ing the sound pattern put: The sound level for the wavelength is adjust- Navigation button for AUX volume and ed with / on the navigation button. 1. Set the audio system in AUX mode using equalizer Press / to select another wavelength. MODE and go to Volume, AUX input. Volume and on/off 2. Turn the control or press / the 2. Use ENTER to save or EXIT to close. 1 Audio volume and automatic volume navigation button. Sound stage control The sound experience can be optimised for Sound pattern The audio system compensates for disrupt- the driver’s seat, both front seats or the rear Press the control repeatedly to browse ing noises in the passenger compartment by seat. Select one of the options under Audio among the following options. The adjustment increasing the volume with the speed of the settings Soundstage. is made by turning the control . 1 car. The level of compensation can be set at Premium Sound • Bass – Bass level. 2 Certain audio systems

112 04 Comfort and driving pleasure

Audio system

CD functions Start playback (CD changer) Pause If a CD position with a music CD is already If the volume is turned down completely, the selected when CD is pressed then playback CD player is stopped. The player is restarted starts automatically. Otherwise select a disc when volume is increased. 1 2 with the number buttons 1-6 or / on the navigation button. Audio files1 The CD player also supports audio files in 3 4 Insert a CD (CD changer) MP3 and WMA formats. 1. Select an empty position with the number buttons 1-6 or / on the navigation NOTE button. 04 5 6 An empty position is marked on the display. Some copy protected audio files may not be read by the player. G010267 The text Insert disc shows that a new disc Centre console, controls for CD functions can be inserted. The CD changer can hold up to six CDs. When a CD containing audio files is inserted CD eject into the player the disc’s directory structure CD insert and eject slot 2. Insert a CD in the CD changer slot. is read in. It may take a while before playback Navigation button for changing CD starts depending on the quality of the disc. tracks Disc eject A CD will stay in the ejected position for ap- Navigation and playback Fast-wind and change CD track prox. 12 seconds. Following which it is re-in- If a disc containing audio files is inside the CD changer position selection* serted in the player and playback continues. CD player then ENTER leads to the disc’s di- Scan CD rectory structure. The directory structure is Eject individual discs by pressing the eject navigated in the same way as the audio sys- Start playback (CD player) button. tem’s menu structure. Audio files have the If a music CD is in the player when CD is Eject all discs with a long press on the eject symbol and directories have the pressed then playback is started automati- button. The entire magazine is emptied disc symbol . Start audio file playback with cally. Otherwise, insert a disc and press CD. by disc. ENTER. When the playback of a file is finished the playback of the other files in the same direc- 1 High Performance and Premium Sound

113 04 Comfort and driving pleasure

Audio system

tory continues. Directory change takes place Different messages appear depending on activate in CD mode under CD settings automatically when all files in the current di- which random function has been selected: Disc text. rectory have been played back. • RANDOM means that the tracks from only one music CD are played Fast-wind/change CD tracks and audio • RND ALL means that all tracks on all files music CDs in the CD changer are played. Short presses / on the navigation but- • RANDOM FOLDER means that the audio ton are used to scroll between CD tracks/au- files in a directory on the current CD are dio files. Long presses are used to fast-wind played. CD tracks/audio files. The steering wheel CD player 04 keypad can also be used for this purpose. Track change can also be made by turning If a normal music CD is being played, acti- Tuning. vate/deactivate under Random. If a disc with audio files is being played, acti- Scan CD vate/deactivate under Random Folder. This function plays the first ten seconds of CD changer each CD track/audio file. Press SCAN to ac- If a normal music CD is being played under tivate. Interrupt with EXIT or SCAN to con- Random Single disc or Random All tinue playback of the current CD track/au- discs, the option All discs only applies to the dio file. music CDs in the changer. Random If a CD with audio files is being played, acti- This function plays the tracks in random or- vate/deactivate instead under Random der. The random CD tracks/audio files can be Folder. If you select another CD the function scrolled through in the normal way. is deactivated.

NOTE Disc text If track titles are stored on a music CD then It is only possible to scroll between random CD tracks on the current disc. they can be shown on the display. This also applies to MP3 and WMA files for Premium Sound and High Performance. Activate/de-

114 04 Comfort and driving pleasure

Audio system

Radio functions Tuning, manual tinues in Auto mode and Auto appears on the 1. Select wavelength using FM or AM. display. The automatically stored presets can 2. Turn TUNING. now be selected using the preset buttons. Automatic preset storage can be cancelled Preset using EXIT. Ten station presets can be stored per wave- 7 Auto mode is cancelled by pressing for ex- length. FM has two memories for presets: ample AUTO or FM. 1 2 3 FM1 and FM2. Only radio stations played through the car’s speakers can be stored as Returning to Auto mode provides access to 6 presets. The stored presets are selected us- the autostored presets: ing the preset buttons. 1. Press AUTO. 04 5 4 Auto appears on the display.

G010268 Preset storage can be carried out manually Centre console, controls for radio functions or automatically. 2. Press a preset button. Navigation button for tuning, automatic Preset storage, manual 1. Tune into a station. Scan wavelength Cancel function in progress The function automatically searches the cur- 2. Hold in one of the preset buttons until Tuning, manual the message Channel stored appears on rent wavelength for strong stations. When a Scan wavelength the display. station is found, it is played for approx. eight seconds before scanning is resumed. Preset storage, automatic Preset storage, automatic While the station is playing it can be stored The function is especially useful in areas Preset buttons and preset storage, man- as a preset as usual. ual where the radio stations and their frequen- Select wavelength AM and FM (FM1 and cies are unfamiliar. The ten strongest radio 1. Select wavelength using AM or FM. FM2) stations are stored automatically in a sepa- 2. Press SCAN. rate memory. SCAN appears on the display. Close using Tuning, automatic 1. Select wavelength using FM or AM. SCAN or EXIT. 1. Select wavelength using FM or AM. 2. Hold in AUTO until Autostoring... ap- 2. Press / on the navigation button. pears on the display. RDS functions Radio Data System – RDS links FM transmit- Once Autostoring... disappears from the dis- ters into a network. An FM transmitter in such play, the stations are stored. The radio con-

115 04 Comfort and driving pleasure

Audio system

a network sends information that gives an Press EXIT to return to the interrupted audio through. The symbol NEWS shows that the RDS radio the following functions: source. function is active. • Automatically switches to a stronger Activate/deactivate under FM settings Alarm transmitter if reception in the area is poor. News. This function is used to warn of serious acci- • Searches for programme type, such as dents and catastrophes. The alarm cannot traffic information or news. News from current/all stations be temporarily interrupted or deactivated. The radio can interrupt with news from only • Receives text information on current radio The message ALARM! appears on the dis- programme. the set (current) station or from all stations. play when an alarm message is transmitted. Go to FM settings Advanced radio set- NOTE tings News station to change. 04 Traffic information – TP Some radio stations do not use RDS or only This function allows traffic information broad- Programme types – PTY some if its functionality. cast within a set station’s RDS network to The PTY function can be used to select dif- break through. The symbol TP shows that ferent programme types, such as pop music If a required programme type is located the the function has been activated. If the set and serious classic. The PTY symbol indi- radio can switch stations interrupting the au- station can send traffic information then TP cates that the function is active. This function dio source currently in use. For example, if appears on the display. allows programme types broadcast within a the CD player is in use, it is paused. The in- Activate/deactivate under FM settings TP. set station’s RDS network to break through. terrupting transmission is played at a preset volume, see page 117. The radio returns to Activate in FM mode by selecting a pro- TP from current station/all stations the previous audio source and volume when gramme type under FM settings PTY The radio can interrupt with traffic informa- the set programme type is no longer broad- Select PTY. tion from only the set (current) station or from cast. all stations. Deactivate by clearing the PTYs under FM The programme functions alarm (ALARM), settings Clear all PTYs. Go to FM settings Advanced radio set- traffic information (TP), news (NEWS), and tings TP TP Station to change. programme types (PTY) interrupt one anoth- PTY search er in order of priority, where alarm has the This function searches the entire wavelength News highest priority and programme types has for the selected programme type. the lowest. For further programme interrup- This function allows news broadcasts within a set station’s RDS network to break 1. Select a PTY under FM settings PTY tion settings, see EON and REG, page 117. Select PTY.

116 04 Comfort and driving pleasure

Audio system

2. Go to FM settings PTY Search PTY. occurs, the radio mutes and PI Seek Press • Distant 1 – interrupts if the station trans- If the radio finds any of the selected pro- Exit to cancel appears on the display. mitter is far away, even if there is a lot of static. gramme types then the display shows Activate/deactivate in FM mode under FM >| To seek . To continue searching for anoth- settings Advanced radio settings AF. • Off – no interruption for programmes from er broadcast of the selected programme other transmitters. types, press on the navigation button. Regional radio programmes – REG Resetting RDS functions This function causes the radio to continue All radio settings can be reset to the original Display of programme type with a regional transmitter even if its signal factory settings. The reset is carried out in The programme type of the current station strength is low. The symbol REG shows that FM mode under FM settings can be shown on the display. the function is active. Advanced radio settings Reset all . 04 Activate/deactivate in FM mode under FM Activate/deactivate in FM mode under FM settings PTY Show PTY settings Advanced radio settings Re- Volume control, programme types gional. The interrupting programme types, e.g. NOTE NEWS or TP, are heard at the volume select- Not all radio stations support display of pro- Enhanced Other Networks – EON ed for each respective programme type. If gramme type. This function is useful in urban areas with the volume level is adjusted during the pro- many regional radio stations. It allows the gramme interruption, the new level is saved distance between the car and the radio sta- until the next programme interruption. Radio text tion transmitter to determine when pro- Some RDS stations transmit information on gramme functions should interrupt the cur- programme content, artists, etc. This infor- rent audio source. mation can be shown on the display. Activate/deactivate in FM mode by selecting Activate/deactivate in FM mode under Radio one of the options under FM settings Ad- text. vanced radio settings EON: Automatic frequency update – AF • Local – interrupts only if the radio station This function selects one of the strongest transmitter is close. transmitters for a set station. The function may need to search through the entire FM wavelength to find a strong transmitter. If this 1 Default/Factory setting.

117 04 Comfort and driving pleasure

Trip computer

General Functions Average The average fuel consumption since the last NOTE reset. Reset using RESET. If a warning message appears while you are NOTE using the trip computer, this message must 1 2 3 be acknowledged in order to revert to the There may be a slight error in the reading if trip computer function. Acknowledge by a fuel-driven parking heater* has been used. pressing READ. Km to empty tank To change unit specified for distance and The calculation is based on the average fuel 04 speed, contact an authorised Volvo work- consumption over the last 30 km and the re- shop.

3603794s maining fuel volume. This shows the approxi- Information display and controls mate distance that can be driven with the fuel Current speed* quantity remaining in the tank. When km to READ – confirms Current speed is shown in miles per hour, empty is less than 20 km then "----" is shown mph. Thumbwheel – browse between menus on the display. and options in the trip computer list RESET – resets Average speed NOTE The car calculates the average speed from To scroll through trip computer information, the last resetting. Reset using RESET. There may be a slight error in the reading if turn the thumbwheel up or down in steps. a fuel-driven parking heater* has been used. Continue turning to return to the starting Current consumption point. Current fuel consumption is calculated every Resetting second. The information on the display is up- 1. Select Average speed or Average. dated every couple of seconds. When the car 2. Press and hold RESET for approx. is stationary, "----" appears on the display. 1 second to reset the selected function. If RESET is kept depressed for at 3 three seconds then Average speed and Average are reset simultaneously.

118 04 Comfort and driving pleasure

Compass*

Operation Calibration Selecting the zone 8 6 9 10 7 9 8 7

11 6 5 12 4 13 3 14 2 15 1 04 3905558s 8803562s 8803554s Rearview mirror with compass. Calibrating the compass. Magnetic zones. The upper right-hand corner of the rearview The compass may need calibrating to work The earth is divided into 15 magnetic zones. mirror has an integrated display that shows correctly. CAL is shown in the mirror’s dis- The correct zone must be selected for the the compass direction in which the front of play if the compass needs calibrating. compass to work correctly. the car is pointing. Eight different directions 1. Stop the car in a large open area. 1. Ignition position II. are shown with English abbreviations: N 2. Start the car. 2. Press and hold the button on the rear of (north), NE (north east), E (east), SE (south 3. Press and hold the button on the rear of the rearview mirror (use a paper clip or east), S (south), SW (south west), W (west) the rearview mirror (use a paper clip or similar) for at least 3 seconds. The and NW (north west). similar) until CAL is shown again (ap- number for the current area is shown. The compass is activated automatically prox. 6 seconds). 3. Press the button repeatedly until the when the car is started or in ignition 4. Drive off as usual. CAL disappears from number for the required geographic position II. To deactivate/activate the com- the display when calibration is com- area (1–15) is shown. pass, use a paper clip for example and press plete. 4. The display will revert to showing the in the button on the rear side of the mirror. Alternative calibration method: compass direction after a few seconds. Drive slowly in a circle at a speed of no more than eight km/h until CAL disappears from the display when calibration is complete.

119 04 Comfort and driving pleasure

Stability and traction control system

General gine is restarted, drive to an authorised Volvo Operation workshop. The stability and traction control system, DSTC (Dynamic Stability and Traction Con- Symbols in the combined instrument trol) helps the driver to avoid skidding and panel improves the car’s traction. If the symbols and are displayed at The system limits the driving and brake force the same time, read the message on the in- 1 2 of the wheels individually so that skidding formation display. can be avoided. This increases manoeuvra- If the symbol appears alone then it may bility and as a result safety in the event of appear as follows: 04 sudden movement. • Flashing light means that the system is Traction is improved by means of the system

now being activated. 3603905s distributing the driving force between the wheels. The system primarily engages at low • Constant glow for 2 seconds means sys- 1. Turn the thumbwheel until the DSTC speed on poor road surfaces. tem check when the engine is started. menu is shown. • Constant glow after starting the engine or DSTC ON means that the system function is The activation of the system during braking while driving means system fault. unchanged. may be noticed as a throbbing sound. The car may accelerate slower than expected Reduced operation DSTC spin control OFF means that system when the accelerator pedal is depressed. System operation during skidding and accel- operation is reduced. eration can be reduced. Operation during 2. Press and hold RESET until the DSTC Messages in the information display skidding is delayed and so allows more skid- menu is changed. DSTC Temporarily OFF – System temporari- ding which provides greater freedom for dy- The system remains reduced until the engine ly reduced due to excessive brake disc tem- namic driving. Traction in deep snow or sand is next started. perature. The function is reactivated auto- is improved as traction is no longer limited. matically when the brakes have cooled. WARNING DSTC Service required – System disabled The car’s driving characteristics may deteri- due to a fault. orate if the function is reduced. Stop the car in a safe place and turn off the engine. If the message remains when the en-

120 04 Comfort and driving pleasure

Adapting driving characteristics

Active chassis (Four C)* Operation Speed related steering force* Active chassis, Four-C (Continuously Con- Steering force increases with the speed of trolled Chassis Concept), regulates the char- the car to give the driver enhanced sensitivi- acteristics of the shock absorbers so that the ty. At low speed the car is easy to steer in or- car’s driving characteristics can be adjusted. der to facilitate parking for example. There are three settings: Comfort, Sport and Steering force can be changed under Car Advanced. settings Steering force level For a description of the menu system, see page 94. Comfort This menu cannot be accessed while the car This setting means that the car is perceived is in motion. as being more comfortable and is recom- 04 mended for longer journeys. Shock absorp- 3801181s tion is soft and the movement of the body is Chassis settings smooth and gentle. Use the buttons in the centre console to change setting. The setting in use when the Sport engine is switched off is activated next time This setting means that the car is perceived the engine is started. as being more sporty and is recommended for more active driving. Steering response is faster than in the Comfort mode. Shock ab- sorption is harder and the body follows the road in order to reduce rolling during fast cornering.

Advanced This setting is only recommended on very even and smooth road surfaces. The shock absorbers are optimised for maximum roadholding and rolling in bends is further minimised.

121 04 Comfort and driving pleasure

Cruise control*

Operation speed is stored and is used as the set speed. depressed for a longer time (approx. The set speed is shown in the display. 60 seconds). Cruise control then changes over to standby mode and the set speed is 1 NOTE saved. Cruise control cannot be engaged at 2 speeds below 30 km/h. Temporary deactivation 5 Press 0 to disengage cruise control tempo- 3 rarily. The saved speed is shown in brackets Adjusting the set speed in the information display. ___ In active mode the speed is adjusted with 4 0 1 long or short presses on or . 04 Resume set speed A temporary increase in speed, such as while If cruise control has been deactivated tem- 2700812s overtaking, does not affect the cruise control porarily, it can be reactivated by pressing . Display and controls setting. When the accelerator is released the The speed is then set to the previously set Standby mode car will return to the set speed. speed. Resume set speed NOTE NOTE Deactivating A significant increase in speed may arise af- Activate/set speed If one of the cruise control buttons is kept depressed for more than approx. one ter the speed has been resumed with . Speed, set minute then cruise control is disengaged. The engine must then be switched off in or- Activating and setting the speed der to then reset cruise control. Deactivation In order to enable the activation of cruise Cruise control is disengaged with CRUISE or control, it must first be engaged in standby Automatic temporary deactivation by switching off the engine. The set speed is cleared. mode with CRUISE. The symbol ilumi- Cruise control is deactivated spontaneously nates and the text when the driving wheels spin or if the car’s (---) km/h shows that cruise control is in speed falls below approx. 30 km/h. Cruise standby mode. Cruise control is then activat- control is also deactivated when the brakes ed with or , after which the current are used, when the gear selector is moved to neutral position or if the accelerator pedal is

122 04 Comfort and driving pleasure

Adaptive cruise control*

General Function Adaptive Cruise Control (ACC) is designed to 1 WARNING assist the driver with support on long straight roads in steady traffic, for example on motor- Adaptive cruise control is not a collision ways and main roads. avoidance system. The driver must intervene if the system does not detect a vehicle Maintenance of cruise control components in front. must only be performed by an authorised Adaptive cruise control does not brake for Volvo workshop. slow or stationary vehicles. 2 3 Do not use the adaptive cruise control, for WARNING example, in city traffic, in dense traffic, at 04 junctions, on slippery surfaces, with a lot of Adaptive cruise control cannot cover all

3905615s water or slush on the road, in heavy rain/ driving situations and traffic, weather and Functions overview snow, in poor visibility, on winding roads or road conditions. on slip roads. The Function section on page 123 and after Warning lamp, braking by driver required informs about limitations that the driver Controls The distance to the vehicle ahead is meas- must be aware of before using the adaptive ured by a radar sensor. The speed is regulat- cruise control. Radar sensor ed by acceleration and braking. It is normal When driving you are responsible for main- Adaptive cruise control consists of the cruise for the brakes to emit a low sound when they taining the correct distance and speed, control system and coordinated spacing sys- are being used by cruise control. even when adaptive cruise control is used. tem. You must always pay attention to the traffic conditions and intervene when adaptive WARNING cruise control is not maintaining a suitable speed or suitable distance. The brake pedal moves when the cruise control brakes. Do not rest your foot under the brake pedal as it could become trapped.

The cruise control objective is to follow the vehicle ahead but in the same lane and at a set distance. If the radar sensor has not detected a vehicle ahead then the only objec-

123 04 Comfort and driving pleasure

Adaptive cruise control*

tive is the set speed. This is also the case if minates the windscreen. The red warning The radar sensor and its limitations the speed of the vehicle ahead exceeds the lamp may be difficult to notice in strong sun- The radar sensor is used both by the adap- cruise control set speed. light or when sunglasses are being worn. tive cruise control and the collision warning The adaptive cruise control objective is to system. It is designed to detect cars or larger control the speed in a smooth way. In situa- WARNING vehicles driving in the same direction. The ra- tions that demand sudden braking you must Cruise control only warns of vehicles de- dar sensor does not detect pedestrians, or brake yourself. This applies with large differ- tected by the radar sensor. Consequently oncoming, slow or stationary vehicles and ences in speed, or if the vehicle in front there may be no warning or it may be sub- objects. Warnings are not given and braking brakes heavily. Due to limitations in the radar ject to a delay. Do not wait for a warning but is not applied in such cases. sensor, braking may come unexpectedly or brake when it is necessary. Modification of the radar sensor could result 04 not at all, see page 124. in it being illegal to use. Adaptive cruise control can only be activated Automatic deactivation Adaptive cruise control is dependent on oth- above 30 km/h. If speed falls below 30 km/h WARNING or if engine speed becomes too slow then er systems e.g. stability and traction control the adaptive cruise control disengages and system (DSTC). If any of these systems stop Accessories or other objects must not be stops braking. In which case the driver must working then cruise control is automatically installed in front of the grille. immediately take over and maintain the dis- deactivated. The capacity of the radar sensor to detect tance to vehicles in front. The highest speed In the event of automatic deactivation a sig- vehicles in front is reduced significantly: setting is 200 km/h. In some situations when nal will sound and the message Cruise Can- the system cannot be activated Cruise Una- celled is shown in the display. You must then •if the radar sensor becomes blocked and vailable is shown in the display, see intervene and adapt your driving and speed cannot detect other vehicles e.g. in heavy page 126. to vehicles in front. rain or slush, or if other objects have collected in front of the radar sensor. Warning lamp, braking by driver An automatic deactivation can be due to: required • speed falls below 30 km/h NOTE Adaptive cruise control has a braking capaci- • wheels lose traction Keep the surface in front of the radar sensor ty that is equivalent to approximately 30 % of • brake temperature is high clean. the car’s braking capacity. If the car needs to • engine speed is too low brake more heavily than cruise control ca- • if the speed of vehicles in front is signifi- pacity and the driver does not brake then a • the radar sensor is blocked e.g. by wet cantly different from your own speed. signal sounds and the red warning lamp illu- snow or rain

124 04 Comfort and driving pleasure

Adaptive cruise control*

The radar sensor has a limited field of vision. Operation then re-engaged when the accelerator pedal In some situations it may detect a vehicle is released. other than the one expected or not detect 1 any vehicle at all. 2 Activating and setting the speed 1 To enable cruise control activation it must 3 first be engaged in standby mode with . The set time interval is briefly shown in the 2 display. Cruise control is activated with or , after which the current speed is stored 4 and used as the set speed. The set speed is shown in the display. In active mode the 0 1/2 1 04 3 speed is adjusted with long or short presses

2700813s on , or . The button has the same Display and controls function as +, but results in a lower increase Activate and resume settings, increase in speed. speed NOTE Standby mode, on/off 3905614s Set distance If cruise control does not seem to react to Radar sensor field of vision (grey) activation the reason may be that the time Activating and setting the speed interval to the closest vehicle prevents an Sometimes the radar sensor cannot de- increase in speed. tect vehicles at close quarters, for exam- Driver operation ple a vehicle that drives in between your Cruise control is deactivated when the NOTE car and vehicles in front. brakes are used, the gear selector is moved Small vehicles, such as motorcycles, or to neutral position, or if the accelerator pedal In some situations cruise control cannot be vehicles not driving in the centre of the is depressed for a longer period. Cruise con- activated. In which case Cruise Unavaila- lane can remain undetected. trol then changes over to standby mode and ble is shown in the display, see page 126. In bends the radar sensor may detect the the driver has full control of the car. If the ac- wrong vehicle or lose a detected vehicle celerator pedal is kept depressed for a short- Set time interval from view. er period, for example during overtaking, The set time interval to vehicles in front is in- cruise control is temporarily disengaged and creased with and decreased with .

125 04 Comfort and driving pleasure

Adaptive cruise control*

The current time interval is shown briefly in Symbols on the display Message Specification the display following adjustment. Five differ- Symbol Specification ent time intervals can be chosen from. A Cruise Cruise control cannot be longer time interval means smoother speed Standby mode or active Unavailable activated. This could be mode without detected control. The recommended time interval is due to: vehicle. three to five. Time intervals one and two are • traction control and primarily intended for driving in queues in Active mode with detected vehicle to which cruise stability function heavy traffic, in which case you must inter- control adapts the speed. (DSTC) has been re- vene more often. duced, see page 120 Distance information. • brake temperature is 04 NOTE high Only use the time interval that is allowed in Messages on the display • the radar sensor is accordance with local traffic regulations. blocked e.g. by wet Message Specification snow or rain Deactivating and resuming settings Radar Cruise control temporarily blocked disengaged. The message Cruise control is deactivated, either with a See manual is shown if the radar short press on , or by means of driver in- sensor is blocked and tervention, e.g. braking. The set speed is cannot detect other then shown in brackets. Speed and time in- vehicles e.g. in heavy rain terval are resumed with one press on . or if slush has collected in front of the radar sensor. NOTE Cruise The cruise control has Cancelled been shut down. The A significant increase in speed may arise af- driver must regulate the ter the speed has been resumed with . speed. Cruise Service Cruise control not required working. Contact an A short press on in standby mode or a authorised Volvo long press in active mode deactivates cruise workshop. control. The set speed is cleared and cannot be resumed.

126 04 Comfort and driving pleasure

Collision warning system with brake support*

General Function the pedal is light. The collision warning system is active between 7 km/h and 180 km/h. The collision warning system (Collision Warn- 1 ing with Brake Support, CW) is an aid de- Limitations signed to warn the driver who is at risk from The visual warning signal may be difficult to driving into a vehicle in front that is driving in notice in strong sunlight or when sunglasses the same direction. are being worn. For this reason always acti- The brake support reduces the collision vate the warning sound during such condi- speed. tions. 2 Maintenance of collision warning system components must only be performed by an NOTE 04 authorised Volvo workshop. The visual warning signal can be temporari- 3905613s ly disengaged in the event of high passen- Functions overview WARNING ger compartment temperature caused by Visual warning signal, collision risk strong sunlight for example. If this occurs The collision warning system does not work then the warning sound is activated even if in all driving situations and traffic, weather Sensor it is deactivated in the menu system. and road conditions. The collision warning The radar sensor detects vehicles in front system does not react to slow vehicles, stationary vehicles or vehicles travelling in an- that are driving in the same direction as you. Warnings may not appear if the distance to other direction to the host vehicle. In the event of there being a risk of collision the vehicle in front is very small or if steering Warnings are given at the earliest in the with such a vehicle your attention is drawn wheel and pedal movements are large, e.g. a event of high collision risk. The Function with a red warning lamp and a warning very active driving style. section and after informs about limitations sound. Warnings may be triggered late, be absent or that the driver must be aware of before use. If the risk of collision still increases after the triggered unnecessarily if the traffic situation The collision warning system has brake warning then the brake support is activated. means that the radar sensor cannot accu- support that only reduces collision speed if the driver brakes. The brake support prepares the brake sys- rately detect a vehicle in front. The collision tem for rapid braking and the brakes are ap- Never wait for a collision warning. When warning system uses the same radar sensors driving you are responsible for maintaining plied gently, which may be noticed as a slight as adaptive cruise control. For more informa- the correct distance and speed, even when jerk. If the brake pedal is depressed suffi- tion on the radar sensor and its limitations, the collision warning system is used. ciently quickly then braking is implemented see page 124. with full brake function, even if the force on

127 04 Comfort and driving pleasure

Collision warning system with brake support*

An absent or late warning means that there is Operation The warning sound and warning lamp are ac- no brake support or it comes late. Some settings are controlled from the centre tivated automatically when the car is started. The automatic activation can be deselected The incorrect warnings may be in the form of console via a menu system. For information under Car settings Collision warn. set- both audio and visual signals. One way of re- on how the menu system is used, see tings On at start up. ducing the number of incorrect warnings is to page 94. reduce the warning distance. The warning sound can be activated/deactivated separately under Car settings Col- lision warn. settings Warning sound.

WARNING 04 When adaptive cruise control is used the warning lamp and warning sound are used by the cruise control even if it has been deactivated by the driver

3603839s Set warning distance Button for activating/deactivating the warning The sensitivity states how early the visual and signals. any audible warning is triggered. Select one of the options under Car settings NOTE Collision warn. settings Warning distance. The brake support is not affected by the settings described here. NOTE

Activating/deactivating warning signals In some situations warnings may seem to be late, even though the warning distance The collision warning system’s audio and vis- has been set to Long. ual signals can be activated/deactivated using . The light in the button indicates that the warning signals are activated.

128 04 Comfort and driving pleasure

Collision warning system with brake support*

Checking settings The current settings are most easily checked by pressing twice on in quick succes- sion. The settings are shown in the display.

Messages on the display Radar blocked See manual – The collision warning system is temporarily disengaged. The message is shown e.g. in heavy rain or if slush has collected in front of the radar sensor. See the section on radar sensor limita- 04 tions, page 124 Collision warn. Service required – The collision warning system is disengaged. Contact an authorised Volvo workshop if the message remains.

129 04 Comfort and driving pleasure

Parking assistance*

General The frequency of the signal increases as you towbar or similar. Otherwise they would trig- come closer to an object in front of or behind ger the sensors. Parking assistance is used as an aid to park- the car. If the volume of another audio source ing. A signal indicates the distance to a de- Rear parking assistance is deactivated auto- from the audio system is high, then this is au- tected object. matically when towing a trailer if Volvo genu- tomatically lowered. ine trailer wiring is used. WARNING The tone becomes constant at a distance of about 30 cm. If there are objects within this Front parking assistance Parking assistance does not relinquish the driver’s own responsibility during parking. distance both behind and in front of the car, The sensors have blind spots where objects the signal alternates between front and rear cannot be detected. Be aware of children speakers. 04 and animals near the car. Rear parking assistance Function1 The system is activated automatically when the car is started. The lamp in the switch in the switch panel illuminates. The text Park Assist ON is shown in the centre console

display if reverse gear is engaged or if the 3603803s front sensors detect an object. The distance covered to the front of the car is The front parking assistance is active at about 0.8 metres. The signal comes from the speeds of below 15 km/h, even during re- front loudspeakers. versing. The system is deactivated at a high-

3603802s Front parking assistance cannot be com- er speed. However, the lamp in the button re- bined with auxiliary lamps because the sen- mains on in order to indicate that the system The distance covered to the rear of the car is sors are affected by the auxiliary lamps. is active for the next time the driver shall about 1.5 metres. Rear parking assistance is park. When the speed is below 10 km/h the activated when reverse gear is engaged. The Fault indicator system is reactivated. signal comes from the rear loudspeakers. If the information symbol illuminates with 1 Depending on the market, the Parking assist- The system must be deactivated when re- constant glow and Park Assist syst Service ance system may be either standard, an op- versing with a trailer, or bike carrier on the required is shown on the information display tion or an accessory. then parking assistance is disengaged.

130 04 Comfort and driving pleasure

Parking assistance*

Activating/deactivating Cleaning the sensors IMPORTANT In certain conditions the parking assistance system may produce incorrect warning signals that are caused by external audio sources that emit the same ultrasonic frequencies that the system works with. Ex- amples of such sources include horns, wet tyres on asphalt, pneumatic brakes and motorcycle exhaust pipes.

04 3501920s 3603804s Parking assistance can be deactivated with The sensors must be cleaned regularly to en- the button in the switch panel, the lamp in the sure that they work properly. Clean them with switch goes out. Parking assistance is reacti- water and car shampoo. vated when the switch is switched on and the Ice and snow covering the sensors may lamp illuminates. cause incorrect warning signals. NOTE Front parking assistance is disengaged automatically when the parking brake is applied.

131 04 Comfort and driving pleasure

Blind Spot Information System, BLIS*

General The system is designed to work most effectively when driving in dense traffic on multi- lane highways. B When a camera has detected a vehicle inside the blind spot zone the indicator A lamp illuminates with a constant glow.

NOTE The lamp illuminates on the side of the car where the system has detected the vehicle. 04 If the car is overtaken on both sides at the

same time then both lamps illuminate. 3603842s 8401361s "Blind spots" covered by BLIS cameras. BLIS camera BLIS advises the driver with a message if a A = approx. 9.5 m and B = approx. 3 m Indicator lamp fault arises in the system. If for example the Cleaning BLIS symbol system’s cameras are obscured then the BLIS indicator lamp flashes and a message is In order to work most effectively the BLIS BLIS is an information system based on dig- shown in the information display. In such camera lenses must be clean. The lenses can ital camera technology that under certain cases, check and clean the lenses. If neces- be cleaned with a soft cloth or damp sponge. conditions can help to draw the driver’s at- sary, the system can be switched off tempo- Clean the lenses carefully so that they are not tention to vehicles moving in the same direc- rarily by pressing the BLIS button, see scratched. tion as the host vehicle in the so-called "blind page 133. spot". IMPORTANT WARNING The lenses are electrically heated to melt ice or snow. If necessary, brush snow away The system is a supplement to, not a re- from the lenses. placement for, a safe driving style and use of the rearview mirrors. It can never replace the driver’s attention and responsibility. The responsibility for changing lanes safely always rests with the driver.

132 04 Comfort and driving pleasure

Blind Spot Information System, BLIS*

When BLIS operates the vehicles. This means for example that the Activating/deactivating The system operates when the car is driven system does not react to a trailer without at a speed above 10 km/h. headlamps which is towed behind a car or truck. Overtaking The system is designed to react if: WARNING • you overtake another vehicle at a speed of The system does not react to bicycles or mopeds. up to 10 km/h faster than the other vehicle The BLIS cameras can be disrupted by in- • you are overtaken by a vehicle travelling tensive light or when driving in the dark up to 70 km/h faster than you are travel- when there are no light sources (e.g. street 04 ling. lighting or other vehicles). The system may then interpret the lack of light as if the cameras have been blocked. 3905609s WARNING Button for activating/deactivating In both cases a message is shown in the in- BLIS does not work in sharp bends. formation display. BLIS is activated when the engine is started. BLIS does not work when the car is revers- When driving in such conditions system The indicator lamps in the door panels flash ing. performance may be temporarily deterio- A wide trailer coupled to the car can con- rate and a text message is shown, see three times when BLIS is activated. ceal other vehicles in adjacent lanes. It can page 134. If the message disappears auto- The system can be deactivated/activated matically then BLIS has returned to normal prevent the vehicle in the screened area when the engine is started by pressing BLIS. from being detected by BLIS. functionality. The BLIS cameras have limitations similar When BLIS is deactivated the light in the but- Daylight and darkness to the human eye, i.e. they "see" worse in ton goes out and a text message is shown on heavy snowfall or thick fog for example. In daylight the system reacts to the shape of the dashboard display. the surrounding vehicles. The system is de- When BLIS is activated the light in the button signed to detect motor vehicles such as cars, illuminates, a new text message is shown on trucks, buses and motorcycles. the display and the indicator lamps in the In darkness the system reacts to the head- door panels flash three times. Press the lamps of surrounding vehicles. If the head- READ button to clear the text message. For lamps of surrounding vehicles are not more information on messages, see page 97. switched on then the system does not detect

133 04 Comfort and driving pleasure

Blind Spot Information System, BLIS*

BLIS system messages Te x t o n t h e System status display Blind spot syst. Blind spot syst. disen- Service gaged. Contact an required authorised Volvo workshop. Blind spot syst. BLIS camera blocked. camera Clean the lenses. blocked 04 Blind spot syst. BLIS system on ON Blind spot syst. BLIS system off OFF BLIS function BLIS function is reduced reduced

134 04 Comfort and driving pleasure

Comfort inside the passenger compartment

Storage spaces

1 2 3

8 4

7 6 5 8505323s

135 04 Comfort and driving pleasure

Comfort inside the passenger compartment

Storage compartment in door panel Tunnel console Glovebox Storage pocket on front edge of front seat cushions A B Ticket clip 1 2 Glovebox Storage compartment, cup holder Jacket holder Cup holder in armrest, rear seat Storage pocket 04 Jacket holder 8505331s 8302560s The jacket holder is only designed for light clothing. Storage compartment (e.g. for CD discs) The owner’s manual and maps can be kept and AUX input under the armrest. here. There are also holders for pens and fuel Includes cup holder for driver and pas- cards. The glovebox can be locked manually senger, and 12 V socket and small com- with the key blade, see page 37. partment. (If ashtray and cigarette lighter are specified then the 12 V socket is Floor mats* replaced by a cigarette lighter and the Volvo supplies specially manufactured floor small compartment by a detachable ash- mats. tray.) WARNING Cigarette lighter and ashtray* The ashtray in the tunnel console is emptied The floor mat at the driver’s seat must be by lifting it straight up. firmly fitted and secured in the attachment clips to prevent it from being trapped Activate the lighter by pushing in the button. around and under the pedals. The button pops out when the lighter is hot. Pull out the lighter and light a cigarette on the heated coils.

136 04 Comfort and driving pleasure

Comfort inside the passenger compartment

Vanity mirror 12 V socket For the socket to supply current, the ignition must be in at least position I, see page 59.

WARNING Always leave the plug in the socket when the socket is not in use.

04 3100219s 3501887s Vanity mirror with lighting. 12 V socket in tunnel console, front seat.

The light illuminates automatically when the . cover is lifted. 3100218s 12 V socket in tunnel console, rear seat. The electrical socket can be used for 12 V accessories, such as mobile phone chargers and coolers. The maximum current is 10 A.

137 04 Comfort and driving pleasure

Comfort inside the passenger compartment

Electrical socket in cargo area* First aid equipment* The equipment is located in the cargo area. The bag has a Velcro strap so that it can be attached to the cargo area wall.

04 3603814s

Fold down the cover to access the electrical socket. It works irrespective of whether or not the ignition is switched on. Use the electrical socket with the engine running to avoid discharging the battery.

138 04 Comfort and driving pleasure

Comfort inside the passenger compartment

Refrigerator* Glass* Cargo area mat*

The refrigerator is located behind the armrest There is a storage compartment for two The rear seat must be folded forward slightly in the rear seat. The refrigerator is always op- glasses and a bottle opener under the cover in cars with refrigerator before the cargo area erational when the engine is running or in ig- in the armrest. mat can be removed. Fold the backrest for- nition position II and is switched off when the ward by pulling the handle, see page 159. engine is switched off. The refrigerator has a WARNING The refrigerator needs a free circulation of air capacity of 11.5 litres. Store glasses in the storage compartment for optimum functionality. For this reason, or in cup holders and make sure that the leave at least 5 cm of free space at the refrig- WARNING armrest cover is closed for the journey. erator air intake in the cargo area. Store bottles well sealed in the refrigerator and make sure that the refrigerator door is closed for the journey.

139 04 Comfort and driving pleasure

Bluetooth handsfree*

General NOTE Phone functions, controls overview

2 Only a selection of mobile phones is fully compatible with the handsfree function. In- formation on compatible phones is availa- 1 2 3 4 ble at Volvo dealers and at www.volvocars.com.

1 3 04 6 5 4 3905557s 3801194s System overview Centre console control panel Mobile phone Volume. Same functionality available in Microphone steering wheel keypad. Steering wheel keypad Number and letter buttons Centre console On/Off Navigation button Bluetooth™ End/refuse calls, clear entered charac- A mobile phone equipped with Bluetooth™ ters, interrupt current function. Same can be connected wirelessly to the audio functionality available in steering wheel system. The audio system then works hands- keypad. free, with the option to control a range of the Accept calls. Same functionality available mobile phone’s functions remotely. The mo- in steering wheel keypad. bile phone can always be operated by its own keys irrespective of whether or not it is connected.

140 04 Comfort and driving pleasure

Bluetooth handsfree*

Remember already been registered then these are also To c al l The menus are controlled from the centre shown. 1. Make sure that the text PHONE is shown at the top of the display and that the console and the steering wheel keypad. For 3. Select Add phone. symbol is visible. general information on menus, see page 94. The audio system searches for mobile 2. Dial the number or use the phone book, phones in the vicinity. The search takes ap- see page 143. Activating/deactivating proximately 30 seconds. The mobile phones 3. Press ENTER. A short press on PHONE activates the detected are specified with their respective handsfree function. The text TELEFON at the Bluetooth™ name in the display. The hands- The call is interrupted with EXIT. top of the display shows that it is in phone free function’s Bluetooth™ name is shown in mode. The symbol shows that the the mobile phone such as My Car. Disconnecting the mobile phone handsfree function is active. Automatic disconnection takes place if the 04 4. Choose one of the mobile phones in the mobile phone moves out of the audio sys- One long press on PHONE deactivates the audio system display. handsfree function and disconnects a con- tem’s range. For more information on con- 5. Enter the number series shown in the nection, see page 143. nected phone. audio system display via the mobile phone keypad. Manual disconnection takes place by deacti- Connect mobile phone The mobile phone is registered and con- vating the handsfree function with one long A mobile phone is connected in different nected automatically to the audio system press on PHONE. The handsfree function is ways depending on whether or not it has also deactivated when the engine is switched while the text Synchronizing is shown in the 1 been connected previously. To connect a display. For more information on how mobile off or when a door is opened . mobile phone for the first time, follow the in- phones are registered, see page 143. When the mobile phone has been discon- structions below. When the connection is established the nected an ongoing call can be continued with 1. Make the mobile phone detectable/visible symbol is shown and the mobile phone the mobile phone’s built-in microphone and via Bluetooth™, see mobile phone manual Bluetooth™ name is shown in the display. speaker. or www.volvocars.com Now the mobile phone can be controlled 2. Activate the handsfree function with from the audio system. NOTE PHONE. Some mobile phones require that the The menu option Add phone is shown in the changeover from handsfree is confirmed display. If one or more mobile phones have from the phone’s keypad.

1 Only Keyless Drive

141 04 Comfort and driving pleasure

Bluetooth handsfree*

Making and receiving calls • Phone book – searching in the phone Audio settings book. Incoming calls Call volume NOTE Calls are accepted with ENTER even if the The call volume can be regulated when the audio system is in CD or FM mode for exam- A new call cannot be started during an on- handsfree function is in phone mode. Use the ple. Refuse or end with EXIT. going call. steering wheel keypad or VOLUME.

Automatic answer Audio system volume The automatic answer function means that Providing there is no ongoing call taking calls are accepted automatically. Activate/ place, the audio system volume is controlled 04 deactivate under Phone settings Call op- as usual with VOLUME. In order to control tions Automatic answer. audio system volume during an ongoing call you have to switch to one of the audio sourc- Call menu es. Press MENU or ENTER during an ongoing The audio source can be automatically mut- call to access the following functions: ed for incoming calls under Phone settings • Mute – the audio system microphone is Sounds and volume Mute radio. muted. • Secrecy – the call is transferred to the Ring volume mobile phone. Go to Phone settings Sounds and volume Ring volume and adjust with / NOTE on the navigation button. With certain mobile phones the connection is terminated when the privacy function is Ring signals used. This is normal.The handsfree function The handsfree function has integrated ring asks if you want to reconnect. signals that can be selected under Phone

142 04 Comfort and driving pleasure

Bluetooth handsfree* settings Sounds and volume Ring More on registering and connecting Phone book signals Ring signal 1, 2, 3 etc. A maximum of five mobile phones can be All use of the phone book presupposes that registered. Registration is performed once the text PHONE is shown at the top of the NOTE per phone. Phones can be deregistered un- display and that the symbol is visible. der Bluetooth Remove phone. After reg- The connected mobile phone’s ring signal is The audio system stores a copy of the phone not deactivated when one of the handsfree istration the phone no longer needs to be vis- book from each registered mobile phone. system’s integrated signals is used. ible/detectable. A maximum of one mobile The phone book is copied automatically to phone can be connected at a time. the audio system during each connection. In order to select the connected phone’s ring Deactivate the function under Phone set- signal 1, go to Phone settings Sounds Automatic connection tings Synchronize phone book. Search- and volume Ring signals Use mobile 04 When the handsfree function is active and ing for contacts is only performed in the con- phone signal. the last mobile phone connected is in range it nected mobile phone’s phone book. is connected automatically. When the audio system searches for the last phone connect- NOTE ed its name is shown in the display. To change over to manual connection of another If the mobile phone does not support copy- phone, press EXIT. ing of the phone book then List is empty is shown when copying is finished. Manual connection If you want to connect a mobile phone other If the phone book contains a live caller’s con- than the last connected or change the contact information then this is shown in the dis- nected mobile phone, proceed as follows: play. 1. Set the audio system in phone mode. Searching for contacts 2. Press PHONE and select one of the The easiest way to search in the phone book phones in the list. is with long presses on the keys 2 to 9. This The connection can also be made via the starts a search in the phone book based on menu system under Bluetooth Connect the key’s first letter. phone or Change phone.

1 Not supported by all mobile phones.

143 04 Comfort and driving pleasure

Bluetooth handsfree*

The phone book can also be reached ENTER to show the last dialled. Other call with / on the navigation button or lists are available under Call list. Key Function with / on the steering wheel keypad. NOTE 5 J K L 5 The search can also be performed from the JKL phone book’s Search menu under Phone Certain mobile phones show a list of the last book Search: dialled calls in reverse order. 6 M N O 6 Ñ Ö Ò Ø MNO 1. Enter the first few letters of the contact and press ENTER, or simply press Inputting text 7 P Q R S 7 ß ENTER. Input text using the keypad in the centre con- PQRS 2. Scroll to a contact and press ENTER to sole. Press once for the key’s first character, 04 call. twice for the second etc. Continue pressing T U V 8 Ü Ù for more characters, see the table below. 8 Voice recognition TUV A short press on EXIT deletes an input char- The mobile phone’s voice recognition func- acter. One long press on EXIT clears all input W X Y Z 9 tion for dialling can be used by holding in EN- 9 characters. / on the navigation but- WXYZ TER. ton scrolls between the characters. Pressed briefly if two characters Voice mail number AUTO shall be entered after each other Key Function * Voice mail number can be changed under with the same key. Phone settings Call options Voice space 1-? ! , . : " ' ( ) + 0 @ * # & $ £ / % mail number. If there is no number stored 1 0 + then this menu can be reached with one long press on 1. Press 1 for a long time to use the 2 A B C 2 Ä Å À Æ Ç SCAN # stored number. ABC #

Call lists 3 D E F 3 È É The call lists are copied to the handsfree DEF function at each new connection and are then updated during the connection. Press 4 G H I 4 Ì GHI

144 04 Comfort and driving pleasure

Built-in phone*

General Remember Making and receiving calls

1 2 SIM card Making calls The phone can only be used with a valid SIM 1. Switch on the phone. card (Subscriber Identity Module). For instal- 2. If PHONE is not shown in the display, lation, see page 149. Emergency calls to briefly press PHONE. emergency numbers can be made without a 3 3 3. Dial the number or use the phone book, SIM card. see page 143. 5 4 4 4. Press ENTER for handsfree calls or pick Menus and controls up the privacy handset. Release the 04 5 The menus are navigated using the control handset by pulling it down. panel and the steering wheel keypad. G010540 3905635s For general information on menus, see System overview Ending a call page 94. For information on the phone’s con- End a call by pressing EXIT or by hanging up Microphone trols, see page 140. the privacy handset. SIM card reader Keypad, see page 109. On/Off Incoming calls Switch on the phone with a short press Control panel Press ENTER for handsfree calls or pick up on PHONE. Enter the PIN code if necessary. the privacy handset. Release the handset by Privacy handset The symbol shows that the phone is pressing it down. If the privacy handset is off switched on. When this symbol is shown the hook when the phone rings then calls Safety calls can be received even if the CD menu for must be received using ENTER. Only entrust phone servicing to an author- example is shown in the display. Briefly press ised Volvo workshop. The built-in phone PHONE to use the phone menus and dial End a call by pressing EXIT or by hanging up must be switched off during refuelling or in out. The text PHONE shows that the phone the privacy handset. Refuse calls using EXIT. the vicinity of blasting work. IDIS limits the menu is active. menu system depending on the speed of the Automatic answer car, see page 147. Switch off the phone with one long press on See page 142. PHONE.

145 04 Comfort and driving pleasure

Built-in phone*

Call waiting During a call Mute mode The function enables a new call to be an- Press MENU or ENTER during a call to ac- Mute mode involves deactivating the micro- swered during an ongoing call. The new call cess the In-call menu. phone, see page 145. Activate/deactivate the is answered as usual and the previous call is microphone using the Microphone On/Off put on hold. Activate/deactivate under To c a ll menu option. Phone settings Call options Call wait- 1. Put the call on hold under Hold. ing. 2. Dial the number of the third party or use the Phonebook menu option. Automatic diversions Incoming calls can be diverted automatically Switch between calls using the Change menu option. 04 depending on the type of call and situation. Activate/deactivate under Call options Di- versions. Conference calls A conference call consists of several parties. It can be initiated when a call is underway and another is on hold. The Connect menu option starts the conference call. All ongoing calls are disconnected if the conference call is terminated.

Switching between the privacy handset and handsfree Switch from handsfree to the privacy handset by picking up the privacy handset or selecting Handset in the menu. Switch from the privacy handset to handsfree using the Handsfree menu option.

146 04 Comfort and driving pleasure

Built-in phone*

Audio settings Phone book Other functions and settings Contact information can be stored on the Call volume SIM card or in the phone. IDIS The phone uses the front door speakers. Call IDIS (Intelligent Driver Information System) volume can be controlled when the text Storing contacts in the phone book can in active driving situations delay or refuse PHONE is shown at the top of the display. 1. Press MENU and scroll to Phonebook ring signals from incoming calls. This way Use the steering wheel keypad or VOLUME. New contact. less attention is distracted from driving. IDIS 2. Enter a name and press ENTER. For is deactivated under Phone settings IDIS. Audio system volume information on text input, see page 143. See page 147. 3. Enter a number and press ENTER. Reading messages 1. Scroll to Messages Read and press 04 4. Scroll to SIM card or Phone memory and ENTER Signals and volume press ENTER. . Change the ring signal under Phone settings 2. Scroll to a message and press ENTER. Sounds and volume Ring signals. Searching for contacts 3. The message text is shown in the dis- Activate/deactivate the message beep under See page 143. play. Further options are obtained by Phone settings Sounds and volume pressing ENTER. Message beep. Erasing contacts Erase a contact in the phone book by select- Writing and sending messages Control the ring volume under Phone set- ing it and pressing ENTER. Then scroll to 1. Scroll to Messages Write new and tings Sounds and volume Ring vol- Erase and press ENTER. press ENTER. ume. Adjust using / on the naviga- 2. Input the text and press ENTER. For Erase all contacts under Phonebook tion button. information on text input, see page 144. Erase SIM or Erase phone. 3. Scroll to Send and press ENTER. Copying entries between the SIM card 4. Enter a phone number and press and the phone book ENTER. Scroll to Phonebook Copy all SIM to Message settings phone or Phone to SIM and press ENTER. Message settings are not normally changed. Voice mail number The network provider has further information See page 144.

147 04 Comfort and driving pleasure

Built-in phone*

on these settings. There are three options the display. Write it down and keep it in a Reset to factory settings under Messages Message settings: safe place. The phone settings are fully reset under • SMSC number which specifies the mes- Phone settings Reset Phone settings. sage centre which will transfer the mes- Network selection sages. The network can be selected either automatically or manually under Phone settings • Validity time which specifies how long the message will be stored in the message Network selection. centre. SIM code and security • Message type. The PIN code can protect the SIM card from 04 Call lists unauthorised use. The code can be changed Lists of received, dialled and missed calls are under Phone settings Edit PIN code. stored in Call list. Dialled calls are also Change the security level under Phone set- shown by pressing ENTER. The phone num- tings SIM security. Select maximum se- bers in the lists can be saved in the phone curity with the On option. The code will then book. need to be entered each time the phone is switched on. Select the next highest security Call duration level with the Automatic option. The phone Call duration is stored under Call list Call then stores the code and automatically spec- duration. Reset the values under Call list ifies it when the phone is switched on. When Call duration Reset timers. the SIM card is used with another phone the code must be entered manually. Select mini- Show/hide number for third party mum security with the Off option. The SIM The phone number can be temporarily hid- card can then be used without the code at den under Call options Send my number. all.

IMEI number In order to block a phone the network provider must be advised of the phone’s IMEI number. Dial *#06# to show the number in

148 04 Comfort and driving pleasure

Built-in phone*

Installing the SIM card 1

3905628s 04 2 3905629s Make sure that the phone is deactivated and remove the SIM card holder. Place the SIM card with the metal surface visible and fit the cover on the SIM card holder . Refit the SIM card holder.

149 Recommendations during driving...... 152 Refuelling ...... 155 Fuel...... 156 Loading ...... 158 Driving with a trailer ...... 162 Towing ...... 168

150 DURING YOUR JOURNEY 05 05 During your journey

Recommendations during driving

General Driving in water IMPORTANT The car can be driven through water at a Economical driving maximum depth of 25 cm at a maximum In the event of engine stop in water do not try restart. Tow the car from the water. Driving economically means driving smoothly speed of 10 km/h. Extra caution should be while thinking ahead and adjusting your driv- exercised when passing through flowing wa- Engine and cooling system ing style and speed to the prevailing condi- ter. Under special conditions, for example when tions. During driving in water, maintain a low speed driving in hilly terrain, extreme heat or with and do not stop the car. When the water has • Get the engine warmed up as soon as heavy loads, there is a risk that the engine been passed, depress the brake pedal lightly possible. and cooling system will overheat. Proceed as and check that full brake function is • Do not let the engine idle, but drive at light follows to avoid overheating the engine. loads as soon as it is possible. achieved. Water and mud for example can make the brake linings wet resulting in de- • Maintain a low speed when driving with a • A cold engine consumes more fuel than a layed brake function. trailer up long, steep ascents. warm one. • Do not turn the engine off immediately you Clean the electric contacts of the electric en- 05 • Do not drive with unnecessary loads in the stop after a hard drive. car. gine block heater and trailer coupling after driving in water and mud. • Remove any auxiliary lamps from in front • Do not use winter tyres when the roads of the grille when driving in extreme high are dry. Do not let the car stand with water over the temperatures. • Remove the load carrier when it is not in sills for any long period of time. This could • Do not exceed engine speeds of 4500 rpm use. cause electrical malfunctions. (3500 rpm for diesel engines) if driving with • Avoid driving with open windows. a trailer or caravan in hilly terrain. The oil NOTE • Use the parking heater* in cold weather so temperature could become too high. that the engine reaches its normal operat- Engine damage can occur if water enters ing temperature more quickly. the air filter. Open boot lid Avoid driving with the boot lid open. If it is Slippery driving conditions however necessary, only drive for a short dis- NOTE Practise driving on slippery surfaces under tance. Close all windows, set the air distribu- controlled conditions to learn how the car re- In greater depths, water can enter the trans- tion to the windscreen and floor and run the acts. mission. This reduces the lubricating ability fan at the highest speed. of the oils and shortens the service life of the systems.

152 05 During your journey

Recommendations during driving

Before a long journey Winter driving WARNING • Check that the engine is working normally Check the following in particular before the Do not drive with the boot lid open. Toxic and that fuel consumption is normal. cold season: exhaust fumes can be drawn into the car • Make sure that there are no leaks (fuel, oil through the cargo area. or other fluid). • The engine coolant must contain at least 50 % glycol. This mixture protects the Do not overload the battery • Check all bulbs and tyre tread depths. engine down to approximately –35 C. To The electrical functions in the car load the • Carrying a warning triangle is a legal re- achieve optimum antifreeze protection, battery to varying degrees. Avoid using the quirement in certain countries. different types of glycol must not be ignition position II when the engine is mixed. switched off. Use ignition position I instead, • The fuel tank must be kept filled to prevent as less power is consumed. condensation. • Engine oil viscosity is important. Oils with Also, be aware of different accessories that lower viscosity (thinner oils) facilitate start- load the electrical system. Do not use func- ing in cold weather and also reduce fuel tions which use a lot of power when the en- consumption while the engine is cold. For 05 gine is switched off. Examples of functions more information on suitable oils, see that use a lot of power: page 218. • ventilation fan • windscreen wipers IMPORTANT • audio system (high volume) Low viscosity oil must not be used for hard •parking lamps driving or in hot weather. If the battery voltage is low, a message appears on the information display. The energy- • The condition of the battery and charge saving function shuts down certain functions level must be inspected. Cold weather places great demands on the battery and or reduces certain functions such as the ven- its capacity is reduced by the cold. tilation fan and audio system. Charge the battery by starting the engine. • Use washer fluid to avoid ice forming in the washer fluid reservoir.

153 05 During your journey

Recommendations during driving

To achieve optimum roadholding Volvo recommends using winter tyres on all four wheels if there is a risk of snow or ice.

NOTE The use of winter tyres is a legal require- ment in certain countries. Studded tyres are not permitted in certain countries.

154 05 During your journey

Refuelling

Refuelling Opening/closing the fuel cap Opening the fuel filler flap manually

WARNING! ACHTUNG! Opening/closing the fuel filler flap AVERTISSEMENT! 2303554s 2303544s

A certain overpressure may arise in the tank The fuel filler flap can be opened manually

3603844s in the event of high outside temperatures. when it cannot be opened from the passen- 05 The engine must be switched off before the Open the cap slowly. ger compartment. fuel filler flap can be opened. Open using the After refuelling, refit the cap and turn it until Remove the cover over the rear lights on button on the lighting panel. The fuel filler flap one or more clicking sounds are heard. the right-hand side of the cargo area. is located on the right-hand rear wing, as in- Reach in and grip the angled metal dicated by the symbol’s arrow in the in- Filling up with fuel clamp. It is located just inside the rear formation display. Do not overfill the tank but fill until the pump edge of the fuel filler flap. Close the fuel filler flap by pressing it in until a nozzle cuts out. Pull the clamp straight out and the fuel click confirms that it is closed. filler flap unfolds. NOTE Excess fuel in the tank can overflow in hot WARNING weather. There are sharp edges behind the panel so move your hands slowly and carefully.

155 05 During your journey

Fuel

General Diesel IMPORTANT Diesel must fulfil the EN 590 or JIS K2204 Fuel of a lower quality than that recommend- Diesel type fuels which must not be used: standards. Diesel engines are sensitive to ed by Volvo must not be used as engine special additives, Marine Diesel Fuel, fuel power and fuel consumption is negatively af- contaminants, such as high volumes of sul- oil, RME (Rape Methyl Ester) and vegetable fected. phur particles for example. Only use diesel oil. These fuels do not fulfil the requirements fuel from a well-known producers. Never use in accordance with Volvo recommendations WARNING diesel of dubious quality. and generate increased wear and engine damage that is not covered by the Volvo Fuel which spills onto the ground can be ig- At low temperatures (–40 C to –6 C), a par- warranty. nited. affin precipitate may form in the diesel fuel, Switch off the fuel-driven heater before which can lead to ignition problems. Special starting to refuel. diesel fuel designed for low temperatures IMPORTANT Never carry an activated mobile phone around freezing point is available from the For model year 2006 or later the sulphur when refuelling. The ring signal could cause major oil companies. This fuel is less viscous content must be a maximum of 50 ppm. spark build-up and ignite petrol fumes, at low temperatures and reduces the risk of 05 leading to fire and injury. paraffin precipitate. Empty tank The risk of condensation in the fuel tank is re- No special procedures are required if the duced if the tank is kept well filled. When re- tank runs dry. The fuel system is bled auto- fuelling, check that the area around the fuel matically if the ignition switch is kept in posi- filler pipe is clean. Avoid spilling fuel onto the tion II for approx. 60 seconds before the start paintwork. Wash off any spillage with deter- attempt. gent and water. Draining condensation from the fuel filter The fuel filter separates condensation from the fuel. Condensation can disrupt engine operation. The fuel filter must be drained at the intervals specified in the Service and Warranty Book- let or if you suspect that the car has been filled with contaminated fuel.

156 05 During your journey

Fuel

Petrol nel walls are lined with a thin layer of plati- IMPORTANT Petrol must meet the EN 228 standard. Most num, rhodium and palladium. These metals Certain special additives remove the water engines can be run with octane ratings of 95 act as catalysts, i.e. they participate in and separation in the fuel filter. and 98 RON. 91 RON should only be used in accelerate a chemical reaction without being exceptional cases. used up themselves. TM • 95 RON can be used for normal driving. Lambda-sond oxygen sensor The Lambda-sond is part of a control system • 98 RON is recommended for optimum intended to reduce emissions and improve performance and minimum fuel consumption. fuel economy. When driving in temperatures above +38 ºC, An oxygen sensor monitors the oxygen con- fuel with the highest possible octane rating is tent of the exhaust gases leaving the engine. recommended for optimum performance and This value is fed into an electronic system fuel economy. that continuously controls the injectors. The ratio of fuel to air directed to the engine is 05 IMPORTANT continuously adjusted. These adjustments create optimal conditions for efficient com- Always refuel with unleaded petrol so as not bustion, and together with the three-way cat- to damage the catalytic converter. In order alytic converter reduce harmful emissions that Volvo’s warranty shall remain valid, never mix alcohol with petrol, as the fuel (hydrocarbons, carbon monoxide and nitrous system could be damaged. Do not use ad- oxides). ditives not recommended by Volvo.

Catalytic converter The purpose of the catalytic converter is to purify exhaust gases. It is located close to the engine so that it quickly reaches operating temperature. The catalytic converter consists of a monolith (ceramic or metal) with channels. The chan-

157 05 During your journey

General • Cover sharp edges with something soft to Load retaining eyelets avoid damaging the upholstery. The load capacity is affected by what is • Secure all loads to the load retaining eye- mounted on the car, such as a towbar, load lets with straps or web lashings. carriers and roof box. The load capacity of the car is also reduced by the number of pas- WARNING sengers and their weight. A loose object weighing 20 kg can, in a WARNING frontal collision at a speed of 50 km/h, carry the impact of an item weighing 1000 kg. The car’s driving characteristics change de- Always secure the load. pending on the weight and distribution of the load.

WARNING 8505313s Loading the cargo area The protection provided by the inflatable The folding load retaining eyelets are used to Stop the engine and apply the parking brake curtain in the headlining may be compro- 05 fasten straps in order to anchor items in the when loading or unloading long objects. The mised or eliminated if the load is too high. Never load cargo above the backrest. Dur- cargo area. gear lever/selector can be knocked out of ing heavy braking the load may otherwise position by long loads, which could set the shift, causing injury to the car’s occupants. WARNING car in motion. Hard, sharp and/or heavy objects that are The boot lid can be opened via loose or protrude could cause injury during a button on the lighting panel or heavy braking. the remote control key, see Always secure large and heavy objects with page 43. a seatbelt or cargo retaining straps. • Position the load firmly against the backrest in front. • Put wide loads in the centre. • Heavy objects should be placed as low as possible. Avoid placing heavy loads on a lowered backrest.

158 05 During your journey

Bag holder* Lowering the rear seat backrest Ski hatch The hatch in the backrest can be opened to transport long narrow items.

1 8505314s 8904104s

The bag holder holds shopping bags in The rear seat backrests can be tipped for- 2 place. wards together, or individually, to make it 05 easier to transport long objects. 1. Open the hatch that is part of the floor in the cargo area. 1. Pull the handle(s). First raise the head restraints if they are lowered, see 2. Secure the shopping bags. page 62. 2. Fold the backrest forward. Adjust the centre seat head restraint if necessary, see page 62. 8505328s WARNING Check that the rear seat backrests are securely locked after raising them.

159 05 During your journey

Hatch behind integrated booster Front seat 3 cushion* The passenger seat backrest can also be The hatch is not fixed into the backrest with folded for an extra long load, see page 60. hinges but is detachable instead.

Removing the hatch After the hatch has been released and the backrest folded backwards, open the hatch approx. 30 degrees and pull it straight up. 8505329s

Fold the right-hand backrest forward. Installing the hatch Release the hatch in the rear seat back- Refit the hatch in the grooves behind the up- rest by sliding the bolt up while pressing holstery and close the hatch. the hatch down/forward. 05 Fold back the backrest with the hatch open.

NOTE If the car is equipped with an integrated booster cushion*, fold it out first.

Use the seatbelt to prevent the load from moving.

WARNING Stop the engine and apply the parking brake when loading and unloading. Other- wise the gear lever/selector can accidentally be knocked and moved to a driving position.

160 05 During your journey

Roof load Warning triangle The warning triangle is fitted on the inside of the boot lid with two clips. Using load carriers 1 Detach the warning triangle case by pull- To avoid damaging the car and for maximum ing both of the snap latches outwards. possible safety while driving, the load carri- Take the warning triangle from the ers designed by Volvo are recommended. case, fold out and assemble the two Carefully follow the mounting instructions loose sides. supplied with the carriers. Fold out the warning triangle’s support legs.

• Check periodically that the load carriers G015351 and load are properly secured. Lash the Follow the regulations for the use of a warn- load securely with retaining straps. 2 ing triangle. Position the warning triangle in a suitable place with regard to traffic. • Distribute the load evenly over the load carriers. Put the heaviest objects at the Ensure the warning triangle and its case are bottom. properly secured in the cargo area after use. 05 • The size of the area exposed to the wind, and therefore fuel consumption, increase with the size of the load.

• Drive gently. Avoid quick acceleration, G015352 heavy braking and hard cornering. 3

WARNING The car’s centre of gravity and driving characteristics are altered by roof loads. Load no more than 100 kg on the roof, including the load carriers and any roof box. G015353

161 05 During your journey

Driving with a trailer

General illuminated and the information display Trailer cable shows High engine temp Stop safely. An adapter is required if the car’s towing If the towing bracket is mounted by Volvo, Stop the car in a safe way and allow the bracket has 13 pin electrics and the trailer then the car is delivered with the necessary engine to run at idling speed for several has 7 pin electrics. Use an adapter cable ap- equipment for driving with a trailer. minutes and cool down. proved by Volvo. Make sure the cable does If High engine temp Stop engine or Cool- • The car’s towing bracket must be of an not drag on the ground. approved type. ant level low, Stop engine then the engine must be switched off after stopping the • If the towbar is retrofitted, check with your car. Direction indicators on trailer Volvo dealer that the car is fully equipped A symbol in the combined instrument panel for driving with a trailer. • The automatic gearbox has a built-in protection system that engages in the event flashes when the direction indicators are • Distribute the load on the trailer so that the of overheating. If the temperature in the used and the trailer is connected. If the sym- weight on the towing bracket complies gearbox is too high then the warning symbol flashes more quickly then one of the with the specified maximum towball load. bol illuminates and the information display lamps on the car or the trailer is broken, see • Increase the tyre pressure to the recom- shows Transmission hot Reduce speed page 55. mended pressure for a full load. For tyre or Transmission hot Stop safely. 05 pressure label location, see page 207. Follow the instructions and reduce speed Automatic gearbox or stop the car in a safe way and allow the • Clean the towing bracket regularly and Parking on a hill grease the towball. engine to run at idling speed for several minutes to enable the gearbox to cool 1. Apply the parking brake (handbrake). • Do not tow a heavy trailer when the car is down. 2. Move the gear selector to position P. brand new. Wait until it has been driven at In the event of overheating the car’s air least 1000 km. Starting on a hill conditioning may be temporarily switched 1. Move the gear selector to position D. • The brakes are loaded much more than off. 2. Release the parking brake (handbrake). usual on long and steep downhill slopes. • In the interests of safety, you should re- Downshift to a lower gear and adjust your strict speed to 80 km/h, even if the laws of Steep inclines speed. certain countries allow for higher speeds. • Select an appropriate manual gear posi- • The engine is loaded more heavily than • Move the gear selector to position P when tion when climbing steep inclines or at low usual when driving with a trailer. parking an automatic car with a hitched speeds. This prevents the gearbox from • The engine can overheat if the car is trailer. Always use the parking brake. changing up and keeps the gearbox oil driven with a heavy load in hot weather. If Block the wheels with chocks when park- cooler. the temperature in the engine’s cooling ing a car with hitched trailer on a hill. system is too high the warning symbol is

162 05 During your journey

Driving with a trailer

• Do not use a higher manual gear than the Towing bracket engine can "handle". It is not always eco- If the car is equipped with a detachable tow- nomical to drive in high gears. bar, the towball mounting instructions must • Avoid driving with a trailer on inclines of be followed carefully, see page 165. more than 15 %. WARNING Level control* The rear shock absorbers maintain a con- Be sure to attach the trailer’s safety cable to stant height irrespective of the car’s load (up the correct place. to the maximum permissible weight). When the car is stationary the rear of the car lowers WARNING slightly, which is normal. If the car is fitted with a Volvo detachable towbar: Follow the assembly instructions Trailer weights for the towball section carefully. The towball National vehicle regulations can limit trailer section must be locked with the key before weights and speeds. Towbars can be certi- setting off. Check that the indicator window 05 fied for higher towing weights than the car shows green. can actually tow. For Volvo’s permitted trailer weights, see page 215. NOTE Always detach the towball section after use. WARNING Keep it in the cargo area. Follow the stated recommendations for trailer weights. Otherwise, the car and trailer may be difficult to control in the event of sudden movement and braking.

163 05 During your journey

Driving with a trailer

Specifications Important checks • The towball must be cleaned and greased regularly. 2 NOTE When a towball hitch with vibration damper is used, the towball need not be greased.

1 8601534s 8601532s Dimensions for mounting points

(mm) 1127 951 855 428 112 360

4 8 Side member 3 Ball centre

7 5 6 1With Nivomat the dimension is 97 mm. 8601533s

164 05 During your journey

Driving with a trailer

Installing the towball 3 5 1 8904093s 8904095s

8904091s The indicator window must show red. The indicator window must show green. Remove the guard plug 4 6 2

05 8904096s 8904094s 8904092s Insert the towball section until you hear a Turn the key anticlockwise to locked Ensure that the mechanism is in the un- click. position. Remove the key from the lock. locked position by turning the key clockwise.

165 05 During your journey

Driving with a trailer

7 8904103s Check that the towball section is secure by pulling it up, down and back. If the towball section is not fitted correctly then it must be removed and refitted in ac- 05 cordance with the previous instructions. 8 8904097s The trailer’s safety cable must be secured to the attachment on the towing bracket.

166 05 During your journey

Driving with a trailer

Removing the towball

1 3 8904100s 8904098s Insert the key and turn it clockwise to the Turn the locking wheel down fully, until it unlocked position. comes to a stop. Hold it in this position while pulling the towball rearward and 2 upward. 4 05 2

1 8904099s Push in the locking wheel and turn it anticlockwise until you hear a click. 8904101s Insert the guard plug.

167 05 During your journey

Tow i n g

General Towing eye WARNING Use the towing eye if the car needs to be Never tow the car to bump start it. Use a do- The steering lock stays in the position it was towed on the road. The towing eye is at- nor battery if the battery is discharged and in when the power was cut off. The steering the engine does not start. lock must be unlocked before towing. The tached in the recess on the right-hand side of ignition must be in position II. Never remove the front or rear bumper. the remote control key from the ignition After use, unscrew the towing eye and return IMPORTANT switch while driving or when the car is being it in the cargo area. Refit the cover on the Bump starting the car can damage the cata- towed. lytic converter. bumper. WARNING WARNING Automatic gearbox The brake servo and power steering do not Move the gear selector to position N. work when the engine is switched off. The The towing eye is only designed for towing brake pedal must be pressed about five on roads, not for recovering the car. Call a times harder than normal, and the steering recovery service for recovery assistance. IMPORTANT will be considerably heavier than normal. 05 Cars with automatic gearbox must not be Find out the highest legal speed before tow- towed at speeds above 80 km/h or further ing the car. than 80 km. The car must always be towed facing forward. WARNING If only partially raised, cars with automatic Insert the remote control key in the ignition gearbox must not be transported at speeds switch to unlock the steering lock (so that above 80 km/h or further than 80 km. The the car can be steered) before towing. car must always be towed with the wheels rolling forward.

Manual gearbox Move gear lever into neutral. The tow rope must always be taut in order to avoid violent jerks. Be prepared to depress the brake pedal.

168 05 During your journey

Tow i n g

Fitting the towing eye

1 8601528s

05 8601529s Take out the towing eye that is located under the floor hatch in the cargo area. Release the bottom edge of the cover on the bumper with a screwdriver or coin. Screw in the towing eye firmly, right up to the flange. Use the wheel wrench to tighten the towing eye.

169 Engine compartment...... 172 Lamps ...... 177 Wiper blades and washer fluid...... 184 Battery...... 186 Fuses...... 189 Wheels and tyres...... 194 Car care...... 210 Type designations ...... 214 Specifications...... 215

170 MAINTENANCE AND SPECIFICATIONS 06 06 Maintenance and specifications

Engine compartment

General Opening and closing the bonnet

WARNING 1 Volvo service programme Bear in mind that the radiator fan may start To keep the car as safe and reliable as possi- automatically some time after the engine ble, follow the Volvo service programme as has been switched off. specified in the Service and Warranty Book- Always have the engine cleaned by a work- let. Have an authorised Volvo workshop carry shop. There is a risk of fire if the engine is out service and maintenance work. Volvo hot. workshops have the personnel, special tools

and service literature to guarantee the high- 00268s IMPORTANT 2 est quality of service. 2 Risk of crushing! The parking brake must be applied before the bonnet is opened. (This IMPORTANT applies to manual parking brake.) For the Volvo warranty to apply, check and follow the instructions in the Service and Warranty Booklet.

Check regularly G010951 06 Check the following oils and fluids at regular Pull the handle by the pedals. You will intervals, e.g. when refuelling: hear when the catch releases. • Coolant Move the catch to the left and open the •Engine oil bonnet. (The catch hook is located between the headlamp and grille to the left • Power steering fluid of centre.) • Washer fluid WARNING Check that the bonnet locks properly when closed.

172 06 Maintenance and specifications

Engine compartment

Engine compartment, overview Checking the engine oil

WARNING 1 6 7 High voltage output from the ignition sys- 2 8 tem. The voltage in the ignition system is highly dangerous. The ignition must there- 3 9 fore always be in position 0 for work in the engine compartment. 4 10 Do not touch the spark plugs or ignition coils when the ignition is in position II or 5 when the engine is hot. 2000480s 2000481s Decal for oil grade The appearance of the engine compartment may vary depending on engine variant. Coolant expansion tank Power steering fluid reservoir Engine oil dipstick 06 Radiator Air filter Filler opening for engine oil Brake and clutch fluid reservoir (left- hand drive) Battery Relay and fuse box Filling washer fluid

173 06 Maintenance and specifications

Engine compartment

Volvo recommends oil products. Filling and dipstick Change in accordance with the intervals If the car is driven in adverse conditions, see specified in the Service and Warranty Book- Volvo’s recommendations on page 218. let.

IMPORTANT IMPORTANT In order to fulfil the requirements for the en- When filling oil to top up, the oil being filled gine’s service intervals all engines are filled must be of the same grade, see page 218. with a specially adapted synthetic engine oil at the factory. The choice of oil has been Checking the oil level in a new car is espe- made very carefully with regard to service cially important before the first scheduled oil life, starting characteristics, fuel consump- change. tion and environmental impact. An approved engine oil must be used in order that The most accurate measurements are made the recommended service intervals can be 2200328s on a cold engine before starting. The meas- applied. Only use a prescribed grade of oil Petrol engine urement will be inaccurate if taken immedi- (see the engine compartment decal) for both filling and oil change, otherwise you ately after the engine is switched off. The dip- will risk affecting service life, starting char- stick will indicate that the level is too low be- acteristics, fuel consumption and environ- cause the oil has not had time to flow down mental impact. Volvo Car Corporation into the oil sump. disclaims all warranty liability if engine oil of 06 the prescribed grade and viscosity is not used.

Volvo uses different systems for warning of MIN MAX low oil level or low oil pressure. Certain variants have an oil pressure sensor, and then the lamp for oil pressure is used. Other vari-

ants have an oil level sensor, and then the 2200327s driver is informed via the warning symbol in the centre of the instrument unit as well as by Diesel engine

display texts. Certain models have both vari- 2200330s ants. Contact an authorised Volvo dealer for The oil level must be within the area marked on more information. the dipstick.

174 06 Maintenance and specifications

Engine compartment

Park the car on a level surface, switch off the Coolant Check the coolant regularly engine and wait 10-15 minutes to allow the The level must lie between the MIN and MAX oil time to run back to the sump. For capaci- Checking and topping up the coolant marks on the expansion tank. If the system is ties, see page 219. not filled sufficiently, high temperatures Checking in a cold engine could occur, causing a risk of damage to the engine. 1. Wipe the dipstick clean. 2. Check the level using the dipstick. It WARNING must be between the MIN and MAX marks. Coolant can be very hot. If the coolant re- 3. If the level is close to the MIN mark, quires topping up when the engine is at operating temperature, unscrew the start by topping up with 0.5 litres of oil. expansion tank cap slowly to gently release Top up until the level is nearer to MAX the overpressure. than MIN on the dipstick.

IMPORTANT 2600518s When topping up the coolant, follow the in- Never fill above the MAX mark. Oil con- structions on the packaging. To optimise re- sumption may increase if too much oil is frigerant and corrosion protection ensure poured into the engine. that the mixture of coolant is always 50% water and 50% coolant. Never top up with 06 WARNING water only. The risk of freezing increases with both too little and too much coolant concen- Do not spill oil onto the hot exhaust mani- fold due to the risk of fire. trate. For capacities, see page 220.

Checking in a warm engine IMPORTANT 1. Wipe the dipstick clean. Always use coolant with anti-corrosion 2. Check the oil level using the dipstick. agent as recommended by Volvo. New cars 3. If the level is close to the MIN mark, are filled with coolant that can withstand start by topping up with 0.5 litres of oil. temperatures down to approximately –35 C. Top up until the level is nearer to MAX than MIN on the dipstick.

175 06 Maintenance and specifications

Engine compartment

Brake and clutch fluid Filling Power steering fluid

Checking the level 1 Brake and clutch fluid have a common reser-

voir. The level must be between the MIN and Max MAX marks that are visible inside the reser- Min voir. Check the level regularly. 2 Change the brake fluid every other year or at every other regular service. For capacities and recommended fluid grade, see page 220. The fluid should be 5200696s 5200697s changed annually on cars driven in condi- The fluid reservoir is located on the driver’s side tions requiring hard, frequent braking, such as driving in mountains or tropical climates The fluid reservoir is protected under the IMPORTANT with high humidity. cover over the cold section in the engine Keep the area around the power steering compartment. The round cover must be re- fluid reservoir clean when checking. WARNING moved first before the reservoir cap can be reached. 06 If the brake fluid is under the MIN level in Check the level frequently. The fluid does not the brake fluid reservoir, do not drive further Turn and open the cover located on the require changing. The fluid level must be be- before topping up the brake fluid. The rea- covering. tween the MIN and MAX marks. For capaci- son for the loss of brake fluid must be inves- Unscrew the reservoir cap and fill the ties and recommended fluid grade, see tigated by an authorised Volvo workshop. fluid. The level must be between the MIN page 220. and MAX marks. NOTE IMPORTANT If a fault should arise in the power steering system or if the engine is switched off and Remember to close the cap. the car must be towed, it can still be steered.

176 06 Maintenance and specifications

Lamps

General Front lamp housing 2. Withdraw the lamp housing’s locking pins . All bulb specifications are given on page 183. 3. Pull the lamp housing straight The following list contains bulbs and point- forward . source lamps that are specialised or unsuita- 4. Detach the lamp housing connector by ble for replacement except at a workshop: pressing down the clip with your • General interior lighting in the roof thumb and at the same time guide • Reading lamps out the connector with your other •Glovebox lighting hand. • Direction indicators, door mirror G010479 • Approach lighting, door mirror IMPORTANT • Brake lights Do not pull the electrical cable, only the • Active Bi-Xenon, Bi-Xenon and LED bulbs connector

WARNING 5. Lift out the lamp housing and place it on a soft surface to avoid scratching the On cars with Bi-Xenon and Active Bi-Xenon lens. headlamps, Xenon lamp replacement must

G010325 6. Replace the bulb in question, see be carried out at an authorised Volvo work- page 183. shop. The headlamps must be handled with All front bulbs (except for fog lamps) are re- 06 extreme care due to the Xenon lamp’s high- placed by first removing the lamp housing voltage unit. from the engine compartment. Installing the headlamp 1. Plug in the connector, a clicking sound WARNING should be heard. IMPORTANT 2. Reinstall the lamp housing and locking Always switch off the ignition and remove pins. Check that they are correctly in- Never touch the glass part of the bulbs with the remote control key before starting to re- serted. your fingers. Grease and oils from your fin- place a bulb. gers are vaporised by the heat, coating the 3. Check the lighting. reflector and then causing damage. Removing the headlamp The lamp housing must be plugged in and in- 1. Switch off the ignition by pressing quickly stalled before the lighting is switched on or on the start/stop button and removing the the remote control key is inserted into the ig- remote control key. nition switch.

177 06 Maintenance and specifications

Lamps

Removing the cover Dipped beam, halogen Main beam, Halogen 3501876s 3501877s 3501875s

NOTE 1. Detach the headlamp. 1. Detach the headlamp. 2. Remove the cover. 2. Remove the cover. Before starting to replace a bulb, see page 177. 3. Detach the bulb by pressing the holder 3. Detach the bulb by turning anticlock- downwards. wise. 1. Open the lock clamp by pressing up/out. 4. Unplug the connector from the bulb. 4. Unplug the connector from the bulb. 06 2. Press down the clips on the cover and 5. Fit the new bulb in the socket and snap 5. Replace the bulb and align it in the remove it. it in. It can only be secured in one socket & turn clockwise in order to position. Reinstall the cover in reverse order. secure it. It can only be secured in one Reinstall the parts in reverse order. position. Reinstall the parts in reverse order.

178 06 Maintenance and specifications

Lamps

Extra main beam Active Bi-Xenon and Position/parking lamps Direction indicators/flashers Bi-Xenon* 3501879s 3501872s 3501897s 1. Detach the headlamp. 1. Detach the headlamp. 1. Detach the headlamp. 2. Remove the cover, see page 178. 2. Remove the small round cover. 2. Remove the cover. 3. For better access, detach the main 3. Pull the bulb holder in order to extract 3. Detach the bulb by pressing the holder beam bulb first. the bulb. downwards. 4. Pull the cable in order to withdraw the 4. Remove the blown bulb and fit a new 4. Unplug the connector from the bulb. bulb holder. one. It can only be installed in one way. 06 5. Fit the new bulb in the socket and snap 5. Remove the blown bulb and fit a new 5. Fit the bulb holder in the socket and it in. It can only be secured in one one. It can only be secured in one press until a clicking sound is heard. position. position. 6. Refit the cover. It must be fitted and Reinstall the parts in reverse order. 6. Fit the bulb holder in the socket and pressed in until a clicking sound is press until a clicking sound is heard. heard. Reinstall the parts in reverse order. Reinstall the parts in reverse order.

179 06 Maintenance and specifications

Lamps

Side marker lamps Fog lamps Lamp housing, rear 3501878s 3501874s 3501880s

NOTE 1. Remove the cover by pressing in the clips The bulbs in the rear light cluster are re- and pulling straight out. placed from inside the cargo area (not the Before starting to replace a bulb, see 2. Unscrew the lamp housing screw and LED lamps). page 177. pull it out. 1. Remove the covers in the left/right-hand 3. Turn the bulb anticlockwise and remove panel to access the bulbs. The bulbs are 1. Detach the headlamp. 06 it. located in separate bulb holders. 2. Remove the small round cover. 4. Fit a new bulb by turning clockwise. 2. Press the catches together and pull out 3. Pull the cable in order to withdraw the the bulb holder. bulb holder. 5. Refit the bulb. (The profile of the bulb holder corresponds to the profile of the 3. Replace the bulb. 4. Remove the blown bulb and fit a new foot of the bulb.) 4. Plug in the connector. one. It can only be installed in one way. 6. Refit the bulb holder. The TOP mark on 5. Press the bulb holder into place and 5. Fit the bulb holder in the socket and the bulb holder must always be upward. refit the cover. press until a clicking sound is heard. 6. Refit the cover. It must be fitted and pressed in until a clicking sound is heard. Reinstall the parts in reverse order.

180 06 Maintenance and specifications

Lamps

Location of rear bulbs Number plate lighting

1 6 2 6 2 3 5 4 5 4 3501894s 3501910s G015418 Lamp lens, right-hand side Rear lamp bulb holder 1. Remove the screws with a screwdriver. Position/parking lights (LED) Direction indicators 2. Carefully detach the entire lamp housing Direction indicators Brake lights and withdraw it. 3. Replace the bulb. Side position lights, SML (LED) Rear fog lamp (one side) 4. Refit the entire lamp housing and screw Brake lights Reversing lamp it into place. 06 Rear fog lamp (one side) Reversing lamp

NOTE If an error message remains after a faulty bulb has been replaced, contact an authorised Volvo workshop.

181 06 Maintenance and specifications

Lamps

Courtesy lighting Cargo area lighting Vanity mirror lighting Removing the mirror glass 3501903s 3501902s 3501883s NOTE 1. Insert a screwdriver and gently turn so that the lamp housing comes loose. 1. Insert a screwdriver underneath the lower Before starting to replace a bulb, see 2. Replace the bulb. edge, in the centre, turn and carefully prise page 177. up the lug on the edge. 3. Check that the bulb illuminates and press back the lamp housing. 2. Insert the screwdriver underneath the 1. Insert a screwdriver at the short end of the edge on the left and right-hand sides (by 06 lens closest to the tunnel console and turn the black rubber sections), and prise gently so that the lens comes loose. (Ap- carefully so that the glass comes loose plies to both lamps). in the lower edge. 2. Turn carefully until the lens comes 3. Carefully detach and lift aside the entire loose. mirror glass and cover. 3. Replace the bulb. 4. Replace the bulb. 4. Refit the lens. Fitting the mirror glass 1. Press the three lugs at top edge of the mirror glass back into position. 2. Then press the three lower lugs back into position.

182 06 Maintenance and specifications

Lamps

Specification, bulbs Output/ Output/ Type/ Type/ Output/ Lighting voltage Lighting voltage Type/ socket socket Lighting voltage (W/V) (W/V) socket (W/V) Direction 21/12 PY21W LL/ Direction 5/12 WY5W LL/ Bi Xenon, 35/12 D1S/PK32d- indicators, BAU15s indicators, W2,1x9,5d Main and 2 rear (yellow) door mirror dipped beam (yellow) Front 21/12 H21W LL/ Extra main 55/12 H7 LL/ direction BAY9s Front fog 35/12 H8/PGJ19-1 beam, Bi- PX26d indicators lamps Xenon Rear position/ – LED/- Glovebox 5/12 -/BA9 Dipped 55/12 H7 LL/ parking and lighting beam, PX26d side marker halogen lamps

Main beam, 65/12 H9/PGJ19-5 Courtesy 5/12 -/SV8.5 Halogen lighting, cargo area 06 lighting, Brake lights 21/12 P21W LL/ number plate BA15s lighting

Reversing 21/12 P21W LL/ Vanity mirror 1,2/12 -/SV5.5 lamp BA15s Front position 5/12 W5W LL/ Rear fog lamp 21/12 P21W LL/ and parking W2,1x9,5d BA15s lamps

Front side 5/12 W5W LL/ marker lamps W2,1x9,5d

183 06 Maintenance and specifications

Wiper blades and washer fluid

Wiper blades Replacing the wiper blades Turn up the wiper arm. Press the button located on the wiper blade mounting and 1 pull straight out parallel with the wiper Service position arm. The wiper blades must be in service position to facilitate replacement or washing. Slide in the new wiper blade until a "click" is heard. 1. Turn the ignition to position 0 and keep Check that the blade is firmly installed. the remote control key in the ignition switch. 2. Move the right-hand stalk switch up for

about 1 second. The wipers then move 3603785s to standing straight up. 2 The wipers return to the starting position when the car is started.

06 3786s 0 3 3603787s

184 06 Maintenance and specifications

Wiper blades and washer fluid

Cleaning Filling washer fluid 3603783s 3603784s The windscreen and headlamp washers NOTE share a common reservoir. The wiper blades are different lengths. The blade on the driver’s side is longer than the IMPORTANT blade on the passenger side. Add washer antifreeze during the winter Clean the wiper blades with a lukewarm soap so that the fluid does not freeze in the 06 pump, reservoir and hoses. For capaci- solution or car shampoo. ties, see page 220.

185 06 Maintenance and specifications

Battery

Warning symbols on the battery Handling • Check that the battery cables are correctly Use protective goggles connected and tightened. • Never disconnect the battery when the engine is running. Store the battery out of the The service life and function of the battery is reach of children. influenced by factors such as the number of starts, discharging, driving style, driving conditions, climatic conditions etc. Avoid sparks and naked Never use a quick charger to charge the flames. battery.

Read the owner’s manual WARNING i Batteries can generate oxyhydrogen gas, which is highly explosive. One spark, which can be generated if you connect jump leads Contains corrosive acid. incorrectly, is sufficient to make the battery explode. The battery contains sulphuric 06 acid, which can cause serious burns. If the acid comes into contact with eyes, skin or clothing, flush with large quantities of water. Risk of explosion If acid splashes into the eyes, seek medical attention immediately.

NOTE The life of the battery is shortened if it be- NOTE comes discharged repeatedly. An expended battery must be recycled in an environmentally responsible manner as it contains lead.

186 06 Maintenance and specifications

Battery

Changing Detach the black negative cable . De- 4 2 Removal tach the red positive cable , detach the ventilation hose from the battery 1 and loosen the screw holding the battery 4 1 clamp . 3 Move the battery to the side and lift it up. 223s 0 5

0220s 2

2 1 0225s Switch off the ignition and wait for 5 minutes. Open the clips on the front cover and 06 0221s 0 remove the cover. 3 Release the rubber moulding so that the rear cover is free. Remove the rear cover by screwing one quarter turn an lifting it away.

WARNING Connect and disconnect the positive and G013020 negative cables in the correct sequence.

187 06 Maintenance and specifications

Battery

Installation Maintenance • Regularly check that the level is correct. 1. Lower the battery into the battery box. A IMPORTANT

Never fill above the mark .

• Check all cells. Use a large screwdriver or a coin to remove the cell caps (or cover). • Top up to the battery’s max. level mark. (Each cell has its own Min. and Max. mark.) • Tighten the cell caps (or cover) firmly. 3100217s 3100224s 2. Move the battery inward and to the side IMPORTANT until it reaches the rear edge of the box. Always use distilled or deionised water (bat- 3. Screw in the battery with the screw in tery water). the clamp. 4. Connect the ventilation hose. 06 5. Connect the red positive cable. A 6. Connect the black negative cable. 7. Press in the rear cover. (See Removal). 8. Reinstall the cold section moulding.

(See Removal). 3100229s 9. Reinstall the front cover and secure it There may be two different types of battery. They are fully interchangeable with each other with the clips. (See Removal).

188 06 Maintenance and specifications

Fuses

General Location, fuse boxes All of the different electrical functions and components are protected by means of a number of fuses in order to prevent damage to the electrical system in your car through 1 short circuits or overloading. If an electrical component or function does not work, it may be because the component’s fuse was temporarily overloaded and failed. If the same fuse fails repeatedly then there is a fault in 2 3 the circuit. In which case, contact an authorised Volvo workshop to have the system 3703828s checked. Location of fuse boxes, left-hand drive

Changing If the car is right-hand drive, fuse box 1. Look in the fuse diagram to locate the changes side. fuse. Under the glovebox 2. Pull out the fuse and check from the Engine compartment side to see whether the curved wire has 06 blown. Cargo area 3. If this is the case, replace it with a new fuse of the same colour and amperage.

189 06 Maintenance and specifications

Fuses

Engine compartment Positions 1

4 39 36

5 40 37 3703833d 3703824s 34 32 30 6 Engine compartment, upper 41 38 35 33 31 Engine compartment, front 7 Engine compartment, lower 44 43 42 These fuses are all located in the engine 3 1 2 compartment box. Fuses in are located 06 under . 20 15 16 2 • 16–33 are 35–41 are of the "MiniFuse" type. 27 24 21 17 • Fuses 8–15 and 34 are of the "JCASE" type and must only be replaced by an

G010503 28 25 22 authorised Volvo workshop. On the inside of the cover are tweezers that 18 • Fuses 1–7 and 42–44 are of the "Midi facilitate the removal and fitting of fuses. 29 26 23 Fuse" type and must only be replaced by 19 an authorised Volvo workshop.

190 06 Maintenance and specifications

Fuses

Function A Function A Function A Heated washer nozzles 10 Water pump (V8) 10/ Primary fuse CEM KL30A 60 Crankcase ventilation heater (5- 20/ Vacuum pump I5T 20 cyl petrol) 20 Primary fuse CEM KL30B 60 Lighting panel 5 Diesel filter heater, crankcase Primary fuse RJBA KL30 60 ventilation heater (5-cyl diesel) Headlamp washers 15 Primary fuse RJBB KL30 60 Leakage diagnosis* 5 12 V socket, front and rear seat 15 Primary fuse RJBD KL30 50 Glow plugs diesel 70 Sunroof*, Roof console/ECC* 10 Reserve Cooling fan 50 Relay, engine compartment box 5 Cooling fan 60 PTC Air preheater* 100 Auxiliary lamps* 20 Reserve Horn 15 Windscreen wipers 30 Engine Control Module (ECM) 10 Parking heater* 25 Control module, automatic 15 Ventilation fan 40 gearbox* Reserve Compressor A/C 15 ABS pump 30 Relay coils 5 06 ABS valves 20 Starter motor relay 30 Reserve Ignition coils/Glow system diesel 20/10 Headlamp levelling* (Active Bi- 10 Engine Control Module (ECM) 10/15 Xenon, Bi-Xenon) petrol/diesel Primary fuse CEM 20 Injection system 15 Radar. ACC control module* 5 Engine valves 10 Speed related power steering 5 EVAP, Lambda-sond, Injection 15/10 (petrol/diesel) Engine Control Module (ECM), 10 transm. SRS

191 06 Maintenance and specifications

Fuses

Under the glovebox Positions Function A

1 Sunroof* 20 Reversing lamps. 7. 5 Reserve 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Front fog lamp* 15 Windscreen washers 15 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Adaptive cruise control ACC* 10 Reserve 3501898s Roof lighting. Control panel driver’s 7. 5 2 door/ Power passenger seat* Information display 5 Power driver’s seat* 5 Function A Retractable head restraint, rear* 15 Rain sensor 5 Remote control key receiver. Alarm 5 06 SRS system 10 sensors

3501899s ABS brakes. Electric parking brake 5 Fuel pump 20 Fold aside the interior trim covering the fuse Accelerator pedal*, air heater (PTC) 7. 5 Electric steering lock 20 box. Heated seats* Reserve 15 Press the cover’s lock and fold it up. Reserve Lock, tank/boot lid 10 The fuses are accessible. ICM display. CD & Radio, RSE 15 system* Alarm siren. ECC 5 Steering wheel module 7. 5 Start/stop button 5 Reserve Brake light switch 5 Main beam 15

192 06 Maintenance and specifications

Fuses

Cargo area Positions Module B (white). Function A Module A (black). Function A Reserve Control panel driver’s door 25 D A B Power seat passenger side 25 Control panel passenger door 25 Keyless drive* 20 Control panel, rear door, left 25 Electric parking brake* left 30 Control panel, rear door, right 25 Electric parking brake* right 30 Reserve 12 V socket cargo, refrigerator* 15 Module D (blue). Function A Rear window defroster 30 Display RTI*, parking camera* 10 Reserve Reserve Tr ai l er s ocke t 2 * 15 Reserve Power seat driver’s side 25 Reserve Tr ai l er s ocke t 1 * 40 Audio amplifier 25 4 3 2 1 Reserve Audio system 15 Phone. Bluetooth 5 06 Module B (white). Function A Reserve - 8 7 6 5 Parking assistance* 5 Control module Four C* 15 Seat heating, driver’s side front* 15 12 10 9 Seat heating, passenger side front* 15 Seat heating right rear* 15 11 AWD control module 10

The fuse box is located behind the upholstery on Seat heating left rear* 15 the left-hand side.

193 06 Maintenance and specifications

Wheels and tyres

General Changing wheels

Tyres greatly affect the car’s driving charac- NOTE teristics. The type of tyre, dimensions, tyre Removing pressure and speed rating are important for Ensure that tyres of the same type and dimensions, and also the same make, are fit- how the car performs. ted to all four wheels. Direction of rotation Follow the recommended tyre pressures specified on the tyre pressure label, see page 208. 7700602s Mounting points Set up the warning triangle if a wheel must be

7700600s replaced at a busy location. The car and jack must be on a firm horizontal surface. 06 The arrow shows the tyre’s direction of rotation 1. Apply the parking brake and engage first Tyres with a tread pattern which are de- gear, or position P if the car has an signed to only turn in one direction have the automatic gearbox. direction of rotation marked with an arrow. 2. Take out the spare wheel, jack and The tyre must always rotate in the same di- wheel wrench that are located under the rection throughout its lifespan. Tyres should carpet in the cargo area. only be switched between front and rear positions, never between left and right-hand NOTE sides, or vice versa. If the tyre is mounted incorrectly, the car’s braking characteristics Use the jack belonging to the car. and capacity to force rain and slush out of the way are adversely affected.

194 06 Maintenance and specifications

Wheels and tyres

3. Place chocks in front of and behind the Installation wheels which will remain on the ground. Use heavy wooden blocks or large 1. Clean the contact surfaces on the wheel WARNING stones. and hub. Never crawl under the car when it is raised 2. Put on the wheel. Screw in the wheel on the jack. bolts. Passengers must leave the car when it is 3. Lower the car so that the wheels cannot raised on the jack. rotate. Park the car so that passengers have the car - or preferably a crash barrier - between them and the road. 7700603s

4. (For cars with steel rims.) Prise off the

wheel cover with the end of the wheel 7700605s 06 wrench, or pull it off by hand. 4. Tighten the wheel bolts crosswise. It is 5. Loosen the wheel nuts ½–1 turn anti- important that the wheel bolts are tight- clockwise with the wheel wrench. ened properly. Tighten to 140 Nm. 6. There are two jacking points on each Check the torque with a torque wrench. side of the car. Crank the foot of the 5. Fit on the wheel cover (for cars with jack down so it is pressed squarely on steel rims). the ground. Check that the jack sits in the anchorage as illustrated and that the foot is positioned vertically under the NOTE anchorage. The hubcap outlet for the valve must be lo- 7. Lift the car so that the wheel is free. cated over the valve on the rim when fitted. Remove the wheel bolts and lift off the wheel.

195 06 Maintenance and specifications

Wheels and tyres

Tyre care This is especially important with regard to WARNING winter tyres.ä The week and year of manu- Tyre age facture, the tyre’s DOT marking (Department A damaged tyre can lead to loss of control of the car. All tyres older than six years should be of Transportation), are stated with four digits, for example 1502. The tyre in the illustration checked by an expert even if they seem un- Tyres with tread wear indicators damaged. Tyres age and decompose, even if was manufactured in week 15 of 2002. they are hardly ever or never used. The function can therefore be affected. This also ap- Summer and winter tyres plies to spare tyres, winter tyres and tyres When summer and winter wheels are saved for future use. Examples of external changed they should be marked with which signs which indicate that the tyre is unsuita- side of the car they were mounted on, for ex- ble for use are cracks or discoloration. ample L for left and R for right. New tyres Wear and maintenance The correct tyre pressure results in more 1502 even wear, see page 208. To achieve the

best traction and more even wear on the 7700601s tyres, the regular switching of the front and rear tyres with each other is recommended. Tread wear indicators are narrow treadless 06 The first change should be after 5 000 km bands across the width of the tread. On the and then at intervals of 10 000 km, this is to side of the tyre are the letters TWI (Tread avoid differences in tread depth. Tyres with Wear Indicator). When the tyre’s tread depth the greatest tread depth should always be fit- is down to 1.6 mm, the tread depth will be ted to the rear wheels to decrease the risk of level in height with the tread wear indicators. Change to new tyres as soon as possible.

7700607s skidding. Contact an authorised Volvo workshop if you are uncertain about tread depth. Remember that tyres with little tread depth Tyres are perishable. After a few years they provide very poor grip in rain and snow. begin to harden at the same time as the fric- Wheels should be stored lying down or hang- tion capacity/characteristics gradually deteri- ing up, and not standing up. orate. For this reason, aim to get as fresh tyres as possible when you replace them.

196 06 Maintenance and specifications

Wheels and tyres

Rims and wheel bolts Winter tyres Using snow chains Volvo recommends winter tyres with particu- Snow chains may only be used on the front IMPORTANT lar dimensions. These are stated on the tyre wheels (also applies to all-wheel drive cars). pressure label, see page 207. The tyre di- The wheel bolts must be tightened to Never drive faster than 50 km/h with snow mensions are dependent on the engine vari- 140 Nm. Overtightening can damage the chains. Avoid driving on bare ground as this ant. When driving on winter tyres, the correct nuts and the bolts. wears out both the snow chains and tyres. tyres must be fitted to all four wheels. Never use quick-fit snow chains as the space Only use rims that are tested and approved between the brake disks and the wheels is NOTE by Volvo and which are Volvo genuine acces- too small. sories. Check the torque with a torque Ask a Volvo dealer which rim and tyre types wrench. are most suitable. IMPORTANT Locking wheel bolts Use Volvo genuine snow chains or equiva- Locking wheel bolts can be used on both alu- Studded tyres lent chains designed for the car model, and minium and steel rims. Studded winter tyres should be run in gently tyre and rim dimensions. Consult an author- for 500-1000 km so the studs settle properly ised Volvo workshop into the tyre. This gives the tyre, and especially the studs, a longer service life.

NOTE 06 The legal provisions for the use of studded tyres vary from country to country.

Tread depth Road conditions with ice, slush and low temperatures place considerably higher demands on tyres than summer conditions. Volvo therefore recommends not to drive on winter tyres that have a tread depth of less than 4 millimetres.

197 06 Maintenance and specifications

Wheels and tyres

To o l s Spare wheel* 2. Undo the retaining screw. The spare wheel (Temporary spare) is only in- 3. Lift out the foam block with its tools. tended for temporary use. Replace the spare 4. Lift out the spare wheel. wheel with a normal wheel as soon as possi- The lower block does not need to be lifted ble. The car’s handling may be altered by the out. use of the spare wheel. The correct tyre pressure for the spare wheel is stated on the tyre After use pressure table, see page 208. The foam block and spare wheel must be replaced in the reverse order to being taken out. IMPORTANT Never drive faster than 80 km/h with a spare wheel on the car.

IMPORTANT

A foam block, located in the spare wheel rim, The car must never be driven fitted with more than one temporary spare wheel. contains all tools. The tools consist of a towing eye, jack and wheel wrench. The foam 06 block is screwed into a bracket in the bottom The spare wheel is located in the spare wheel of the spare wheel well. well with the rim side down. Three foam blocks, two under the spare wheel and one Jack over/inside affix the spare wheel in position. The upper one contains all tools. The original jack should only be used for changing wheels. The jack’s thread must al- The same bolt runs through to secure the ways be well greased. spare wheel and the foam blocks. Crank the jack together Taking out the spare wheel 1. Fold the rear edge of the floor mat forward.

198 06 Maintenance and specifications

Wheels and tyres

Emergency puncture repair emergency puncture repair kit if they have Puncture repair types larger slits, cracks or similar damage. NOTE 12 V sockets for the compressor are located by the centre console in the front, by the rear The car can be supplied with two different types of emergency puncture repair kit. seat and in the cargo area. Choose the elec- They are each described individually and trical socket that is nearest the punctured are named variant 1 and variant 2 tyre.

General Taking out the emergency puncture The emergency puncture repair kit is used to repair kit seal the puncture and to check and adjust Set up the warning triangle adjacent to a traf- ficked location. The emergency puncture re- the tyre pressure. It consists of a compressor 7700608s and a bottle with sealing fluid. The kit works pair kit is located under the floor in the cargo Emergency puncture repair kit, type 1 see as a temporary repair. The sealing fluid bottle area. page 200. must be replaced before its expiration date 1. Fold the rear edge of the floor mat for- and after use. For information on replace- ward. ment, see page 202 for type 1 or page 206 2. Unscrew the retaining screw. for type 2. 3. Lift away the foam block holding the 06 The sealing fluid effectively seals tyres punc- jack and wheel wrench. tured in the tread. 4. Lift up the emergency puncture repair kit. NOTE Replace the parts after use. The emergency puncture repair kit is only intended for sealing tyres with a puncture in WARNING the tread. You should not drive faster than 80 km/h

after the emergency tyre repair kit has been G014340 The emergency puncture repair kit has limit- used. The temporarily sealed tyre must be Emergency puncture repair kit, type 2 see ed capacity to seal tyres which have punc- changed as soon as possible (maximum page 204. tures in the wall. Do not seal tyres with the driving distance: 200 km).

199 06 Maintenance and specifications

Wheels and tyres

Variant 1 2. Unscrew the wheel’s dust cap and Sealing punctured tyres screw in the air hose valve connection to the bottom of the thread on the tyre’s Inflating tyres air valve. 3. Connect the lead to one of the car’s 12 V sockets. 3 4. Start the engine.The car must be in a 3 well-ventilated place. 2 WARNING 2 Inhaling car exhaust fumes can result in danger to life. Never leave the engine running in sealed areas or areas that lack suffi- 7700609s cient ventilation. 7700609s 5. Start the compressor by flicking the switch to position I. 6. Pump up the tyre to the pressure specified on the tyre pressure label. 06 7. Switch off the compressor, the switch should be in position 0. De- 5 tach the air hose and unplug the lead. Refit the dust cap. 1 6 8. Put the lead and air hose into the 4 8 side compartment . 7700610s 9. Put the puncture repair kit back under 1. Remove the decal regarding the high-

6000034s the floor in the cargo area. est permitted speed from the emergency 1. Ensure that the orange switch is in The compressor must not run for more than puncture repair kit and stick it on the 10 minutes. Let it cool afterwards as there is steering wheel where it can be clearly position 0 and take out the lead and air a risk of overheating. seen by the driver. hose from the side compartment . Objects with a volume up to 50 litres can be 2. Ensure that the orange switch is in inflated with the compressor. position 0 and take out the lead and

200 06 Maintenance and specifications

Wheels and tyres

air hose from the side 8. Pump the tyre to a pressure of between Final check compartment . 1.8 bar and 3.5 bar. If the pressure does 3. Screw the air hose’s valve connection to not reach 1.8 bar after 10 minutes of WARNING the bottom of the thread on the tyre’s air pumping, the compressor must be turned off so it does not overheat. You should not drive faster than 80 km/h valve. after the emergency tyre repair kit has been 4. Connect the lead to the car’s 12 V used. The temporarily sealed tyre must be socket. WARNING changed as soon as possible (maximum driving distance: 200 km). 5. Release the safety catch and turn the Never stand next to the tyre when the com- orange-coloured part to the vertical pressor is running. Be particularly observ- position, until a click is heard. ant of the tyre walls. If cracks, irregularities NOTE or other damage appears, turn off the com- 6. Start the engine.The car must be in a pressor immediately. Under these circum- Do not raise the orange-coloured part (7) well-ventilated place. stances your journey should not continue. when the compressor is only to be used for Contact an authorised tyre centre. inflation.

9. Undo the air hose from the tyre’s air 1. Unscrew the dust cap and connect the air 7 valve and refit the dust cap. Unplug the hose to the tyre’s air valve. Connect lead from the 12 V electrical socket. the lead to the 12 V socket. Read the Fold the orange-coloured part back pressure on the compressor. If the tyre into its original position and secure the pressure is below 1.3 bar, the tyre has not 5 catch . Keep the emergency repair kit been sufficiently well sealed. Under these 06 in a safe place in the car. circumstances your journey should not be 10.Immediately drive about 3 km, at a continued. Contact a tyre centre. maximum speed of 80 km/h, to allow 4 8 2. If the tyre pressure is higher than 7700611s the sealing fluid to seal the tyre well. 1.3 bar, the tyre must be inflated to the pressure stated on the tyre pressure 7. Start the compressor by flicking the label. Relieve pressure with the reduc- switch to position I. There will be a tion valve if the tyre pressure is too temporary pressure increase of max. high, see page 208. 4 bar while the sealing fluid is pumped in. After approx. 1 minute, the pressure 3. Switch off the compressor, the will drop and the gauge will indicate the switch should be in position 0. De- correct tyre pressure.

201 06 Maintenance and specifications

Wheels and tyres

tach the air hose and unplug the lead. Replacing the sealing fluid canister Refit the dust cap. 1 4. Put the lead and air hose into the side compartment . 2 6 5. Put the puncture repair kit back under the floor in the cargo area. 8 The compressor must not run for more than 10 minutes. Let it cool afterwards as there is a risk of overheating. 4 5 3 NOTE 9 7700614s

The canister with sealant and hose should 7700616s be replaced after use. The sealing fluid canister should be replaced before its expiration date, see the date label , or after puncture repair. After use, the canister with holder and air 10 hose should be replaced.

06 This replacement can be carried out by an authorised Volvo workshop or by following the instructions.

IMPORTANT 7700615s Read the safety instructions on the bottom of the canister. WARNING Ensure the compressor is not connected to the 12 V socket when the canister is replaced, there is a risk of residual air pressure in the canister.

202 06 Maintenance and specifications

Wheels and tyres

Replacing the canister before the expi- 3. Unscrew and remove the canister . 3. Push down the button while turning ration date has been reached 4. Check that the seal on the new the canister and the holder clock- canister is not damaged. Screw in the wise. Remove them. 1 canister. 4. Pull out the air hose , see page 202. 2 5. Refit the case . Check that the case is 5. Wipe off remaining sealing fluid with a correctly fitted. Screw it on with the rag or scrape it away if it has already screws . dried. 6. Affix the speed label and new date 6. Fit a new air hose and check that it is label to the tyre repair kit. fitted correctly. 4 5 3 Treat the removed canister as hazardous 7. Check that the seal on the new waste. canister is not damaged. Screw the holder onto the canister and turn Replacing the canister and hose

7700616s it anticlockwise until a click is heard. 8. Refit the case . Check that the case is correctly fitted. Screw it on with the 6 screws . 7 9. Affix the speed label and new date 10 6 label to the tyre repair kit. The empty canister and air hose can be treat- 06 8 ed as normal waste.

9 7700615s 7700617s 1. Undo the two screws on the orange- 1. Undo the two screws on the orange- coloured case . coloured case . 2. Remove the speed label and date 2. Remove the speed label and date label , and open the safety catch . label , and open the safety catch . Loosen the case and take it off. Loosen the case and take it off.

203 06 Maintenance and specifications

Wheels and tyres

Variant 2 Air hose IMPORTANT Sealing fluid bottle Overview Risk of overheating. The compressor must Pressure gauge not run for more than 10 minutes. Gloves 6. Switch off the compressor. Detach the Inflating the tyres air hose and cable. The car’s original tyres can be inflated by the 7. Refit the dust cap. compressor. 1. The compressor must be switched off. Make sure that the switch is in position 0 and locate the cable and air hose. 2. Unscrew the wheel’s dust cap and screw in the air hose valve connection to the bottom of the thread on the tyre’s air valve. 3. Connect the cable to one of the car’s 12 V sockets and start the car.

06 WARNING Inhaling car exhaust fumes can result in 10 danger to life. Never leave the engine running in sealed areas or areas that lack suffi- G014337 cient ventilation. Decal, maximum permitted speed 4. Start the compressor by flicking the Switch switch to position I. Cable 5. Inflate the tyre to the pressure specified Bottle holder (orange cap) on the tyre pressure decal. (Release air Protective cap using the pressure reducing valve if the tyre pressure is too high.) Pressure reducing valve

204 06 Maintenance and specifications

Wheels and tyres

Sealing punctured tyres 4. Put on the gloves. 9. Flick the switch to position I.

WARNING WARNING The sealing fluid can irritate the skin. In the Never stand next to the tyre when the com- case of contact with skin, wash away the pressor is running. If cracks or unevenness fluid with soap and water. arise then the compressor must be switched off immediately. The journey 5. Unscrew the orange cap and unscrew should not be continued. Contact an au- the bottle’s stopper. thorised tyre centre.

NOTE NOTE Do not break the bottle seal. The seal is bro- When the compressor starts the pressure ken when the bottle is screwed in. can increase up to 6 bar but the pressure drops after approximately 30 seconds. 6. Screw the bottle into its holder. 10.Inflate the tyre for 7 minutes. IMPORTANT IMPORTANT Do not unscrew the bottle from its holder after use as surplus fluid could run out. Risk of overheating. The compressor must 06

G014338 not run for more than 10 minutes. For information on the function of the parts, 7. Unscrew the wheel’s dust cap and please refer to the illustration on page 204. screw in the air hose valve connection 11.Switch off the compressor to check the to the bottom of the thread on the tyre’s pressure on the pressure gauge. Mini- 1. Open the lid of the emergency puncture air valve. mum pressure is 1.8 bar and maximum repair kit. 8. Plug the cable into the 12 V socket and is 3.5 bar. 2. Detach the decal for maximum permit- start the car. ted speed and affix it to the steering wheel. 3. Check that the switch is in position 0 and locate the cable and the air hose.

205 06 Maintenance and specifications

Wheels and tyres

Replacing the sealing fluid canister WARNING NOTE 5. Replace the bottle when the expiration If the pressure is below 1.8 bar then the To avoid splashes, leave the bottle in its date has passed. Treat the old bottle as hole in the tyre is too big. The journey holder. environmentally hazardous waste. should not be continued. Contact an authorised tyre centre. 4. Return the emergency puncture repair kit to the cargo area. IMPORTANT 12.Switch off the compressor and unplug the cable from the 12 V socket. Read the safety instructions on the bottom NOTE of the bottle. 13.Detach the hose from the tyre valve and fit the valve cap. The sealing fluid bottle and hose must be replaced after use. Replacement must be 14.As soon as possible drive performed by an authorised Volvo work- approximately 3 km at a maximum shop. speed of 80 km/h so that the sealing fluid can seal the tyre. Rechecking the repair and pressure WARNING 1. Reconnect the equipment. Check the tyre pressure regularly. 2. Read the tyre pressure on the pressure gauge. Drive to the nearest authorised Volvo work- 06 • If it is below 1.3 bar then the tyre is shop to replace the damaged tyre. Advise insufficiently sealed. The journey should the workshop that the tyre contains sealing not be continued. Contact a tyre centre. fluid. • If the tyre pressure is higher than 1.3 bar, the tyre must be inflated to the pressure WARNING specified on the tyre pressure decal. Re- You should not drive faster than 80 km/h lease air using the pressure reducing valve after the emergency puncture repair kit has if the tyre pressure is too high. been used. The temporarily sealed tyre 3. Switch off the compressor. Detach the must be changed as soon as possible (max- air hose and cable.Refit the dust cap. imum driving distance: 200 km).

206 06 Maintenance and specifications

Wheels and tyres

Specifications rating of the tyre (for example, class Q can be Tyre pressure driven at a maximum of 160 km/h). Designation of dimensions Traffic regulations determine how fast a car The dimensions are stated on all car tyres. can be driven, not the speed rating of the Example of designation: tyres. 225/50R17 94 W. Q 160 km/h (used only on 225 Section width (mm) winter tyres)

50 Ratio between section T 190 km/h height and width (%) H 210 km/h R Radial ply 7700650s V 240 km/h • Tyre pressure for the car’s recommended 17 Rim diameter in inches (") wheel dimension W 270 km/h •ECO pressure 94 Tyre load index Y 300 km/h • Spare wheel pressure (Temporary Spare) W Speed rating (in this case NOTE 270 km/h). 06 Temperature differences change tyre pressure. Speed ratings NOTE The car is approved as a whole, which means It is the maximum permitted speed that is The tyre pressure decal on the driver’s side that dimensions and speed ratings must not stated in the table. door pillar (between frame and rear door) differ from those specified on the car’s registration document. shows which pressures the tyres should have at different loads and speed conditions, this The only exception to these conditions is is also specified in the tyre pressure table, winter tyres (both those with metal studs and see page 208. those without). If such a tyre is chosen, the car must not be driven faster than the speed

207 06 Maintenance and specifications

Wheels and tyres

Recommended tyre pressure Speed Load, 1-3 persons Max. load Variant Tyre size (km/h) Front (kPa) Rear (kPa) Front (kPa) Rear (kPa) 8-cyl 225/50 R 17 0 – 160 230 210 260 260 160 + 290 290 300 300 245/45 R 17 0 – 160 220 210 260 260 160 + 280 280 300 300 245/40 R 18 0 – 160 240 220 260 260 160 + 270 270 290 290 6-cyl 225/55 R 16, 225/50 R 17, 0 – 160 220 210 260 260 245/45 R 17 160 + 270 270 290 290 245/40 R 18 0 – 160 230 210 260 260 160 + 270 270 290 290 5-cyl diesel 225/55 R 16, 0 – 160 220 210 260 260 185 hp 225/50 R 17, 245/45 R 17 160 + 260 260 270 270 245/40 R 18 0 – 160 230 210 260 260 06 160 + 260 260 270 270 5-cyl diesel 225/55 R 16, 0 – 160 220 210 260 260 163 hp 225/50 R 17, 5-cyl petrol 245/45 R 17 160 + 260 260 270 270 205/60 R 16, 245/40 R 18 0 – 160 230 210 260 260 160 + 260 260 270 270 All All1 0 – 160 2601 2601 2601 2601 Spare T 125/80 R 17 max. 80 420 420 420 420 wheel2

1ECO pressure, economical driving 2Temporary Spare

208 06 Maintenance and specifications

Wheels and tyres

Fuel economy, ECO pressure At speeds under 160 km/h, the general tyre pressure for full load is recommended in order to obtain optimum fuel economy. Checking the tyre pressure The tyre pressures must be checked every month. This also applies to the car’s spare wheel. After several few kilometres of driving, the tyres warm up and the pressure increases. Check tyre pressures on cold tyres. "Cold tyres" means the tyres are the same temperature as the ambient temperature. Inadequately inflated tyres increase fuel consumption, worsen tyre lifespan and the car’s roadholding. Driving on tyres with tyre pressure that is too low can also result in the tyres overheating and disintegrating. Tyre pressure affects travelling comfort, road noise and steering characteristics. 06

NOTE Tyre pressure decreases over time, this is a natural phenomenon. Tyre pressure also varies depending on ambient temperature.

209 06 Maintenance and specifications

Car care

Washing the car NOTE same thing after starting in very damp or cold weather. Wash the car as soon as it becomes dirty. Outside lighting such as headlamps, fog Wash the car in a car wash with oil separator. lamps and rear lamps may temporarily have Exterior plastic parts Use car shampoo. condensation on the inside of the lens. This A special cleaning agent available at Volvo is a natural phenomenon, all outside lighting • Remove bird droppings from the paint- is designed to withstand this. Condensation dealers is recommended when cleaning ex- work as soon as possible. Bird droppings is normally vented out of the lamp housing terior plastic parts that are not colour coordi- contain chemicals that affect and discol- when it has been switched on for a time. nated. Never use strong stain removers. our paintwork very quickly. An authorised Volvo workshop is recommended for the Rims removal of any discoloration. Automatic car washes An automatic car wash is a simple and quick Only use cleaning agent recommended by • Hose down the underbody. If using a way of washing the car, but an automatic car Volvo. Strong rim cleaning agents can dam- pressure washer, keep the nozzle at least age the surface and cause stains on chrome- 30 cm from the painted surfaces. wash cannot reach everywhere. Handwash- ing the car is recommended for achieving op- plated aluminium rims. • Rinse the entire car to remove loose dirt. If using a pressure washer: keep the nozzle timum results. at least 30 cm from the painted surfaces. Do not spray directly onto the locks. NOTE • Wash using a sponge, car shampoo and During the first few months a new car must 06 plenty of lukewarm water. only be handwashed. This is because the paintwork is more sensitive when it is new. • Clean the wiper blades with a lukewarm soap solution or car shampoo. • Use cold degreasing agent on very dirty WARNING surfaces. Always test the brakes after washing, so • Dry the car using a clean, soft chamois or that moisture and corrosion do not affect a water scraper. the brake linings and impair the brakes.

WARNING Lightly depress the brake pedal now and then when driving long distances in rain or Always have the engine cleaned by a workshop. There is a risk of fire if the engine is slush. The heat from the friction causes the hot. brake linings to warm up and dry. Do the

210 06 Maintenance and specifications

Car care

Polishing and waxing Rustproofing – inspection and Cleaning the interior Polish and wax the car if the paintwork is dull maintenance Only use cleaning agents and car care prod- or to give the paintwork extra protection. The car received a thorough and complete ucts recommended by Volvo. Clean regular- rustproofing at the factory. Parts of the body ly and follow the instructions included with The car does not need to be polished until it are made of galvanised sheet metal. The un- the car care product. is at least one year old. However, the car can derbody is protected by a wear-resistant be waxed during this time. Do not polish or anti-corrosion compound. A thin, penetrating Stains on fabric upholstery and roof wax the car in direct sunlight. rustproofing fluid was sprayed into the ex- upholstery Wash and dry the car thoroughly before you posed members, cavities, closed sections A special fabric cleaning agent, available begin polishing or waxing. Clean off asphalt and side doors. from authorised and tar stains using Volvo tar remover or Under normal conditions the rustproofing Volvo dealers, is recommended to avoid im- white spirit. More stubborn marks can be re- does not require treatment for approximately pairing the fire retardant qualities of the up- moved using fine rubbing paste designed for 12 years. After this period, it should be treat- holstery. car paintwork. ed at three-year intervals. Please contact an Use water and a synthetic detergent to clean Polish first with a polish and then wax with authorised Volvo workshop if the car needs the seatbelts. Make sure the seatbelt is dry liquid or solid wax. Follow the instructions on further treatment. before allowing it to retract. the packaging carefully. Many preparations Dirt and road salt can lead to corrosion so it contain both polish and wax. is important to keep the car clean. The car’s IMPORTANT rustproofing needs to be checked regularly 06 IMPORTANT Sharp objects and Velcro may damage the and touched-up if necessary in order for it to fabric upholstery. Paint treatment such as preserving, sealing, be maintained. protection, lustre sealing or similar could damage the paintwork. Paintwork damage Treating stains on leather upholstery caused by such treatments is not covered Volvo’s leather upholstery is equipped with by Volvo warranty. surface protection against dirt. Cleaning re- protects the leather but grease and dirt dis- solves the surface protection. There is a comprehensive programme for the care and maintenance of leather upholstery. Volvo of- fers a leather product for cleaning and treat-

211 06 Maintenance and specifications

Car care

ing the upholstery by which means the leath- 4. Wipe off with soft paper or a cloth and Touching up paintwork allow the leather to dry completely. er regains its protective layer. Paint is an important part of the car’s rust- Protective treatment of leather uphol- proofing and should therefore be checked stery regularly. To avoid the onset of rust, dam- 1. Pour a small amount of the protective IMPORTANT aged paintwork should be rectified immedi- cream on the felted cloth and massage in ately. The most common types of paintwork Never use strong solvents. Such products a thin layer of cream with gentle circular damage are stone chips, scratches, and may damage fabric, vinyl and leather uphol- movements on the leather. marks on the edges of wings and doors. stery. 2. Now allow the leather to dry for 20 minutes before use. Materials IMPORTANT The leather has now been given improved • primer in a can protection against stains and a UV filter. Note that materials with colour that runs • paint in a can or touch-up pen when dry (new jeans, suede garments etc.) •brush may discolour the upholstery material. Stains on interior plastic parts and surfaces •masking tape A fibrillated fibre or microfibre cloth, mois- Colour code To achieve best results Volvo recommends tened lightly with water, available from au- cleaning and application of the protective thorised Volvo dealers, is recommended for cream two to four times per year. Ask your cleaning interior plastic parts and surfaces. 06 Volvo dealer about Volvo’s leather care product Do not scrape or rub stains. Never use strong stain removers. A special cleaning agent Washing instructions for leather uphol- available from Volvo dealers can be used for stery more difficult cleaning. 1. Pour the leather cleaner on the dampened sponge and squeeze out a strong foam. Carpets and cargo area 2. Work the dirt away with gentle circular Remove inlaid carpets for separate cleaning

movements. 0300443s of the floor carpet and the inlaid carpets. Use 3. Dab the sponge accurately on the a vacuum cleaner to remove dust and dirt. stains. Allow the sponge to absorb the It is important that the exact correct colour is stain. Do not rub. used. The product decal specifies the car’s colour code, see page 214.

212 06 Maintenance and specifications

Car care

Repairing stone chips 4. After a few days, polish the touched-up areas. Use a soft rag and a small amount of lapping paste.

NOTE If the stone chip has not penetrated to the bare metal and there is an undamaged colour coat, you can paint straight after cleaning the damaged surface. 1700382s

Before work is begun, the car must be clean and dry and at a temperature above 15 C. 1. Apply a piece of masking tape over the damaged surface. Then remove the tape to remove any loose paint. 2. Stir the primer well and apply using a 06 fine brush or a matchstick. Apply paint using a brush once the primer is dry. 3. For scratches, proceed as above, but mask around the damaged area to protect the undamaged paintwork.

213 06 Maintenance and specifications

Type designations

Decal location Knowing the car’s type designation, vehicle 1 identification and engine numbers can facilitate all contact with an authorised Volvo dealer regarding the car and when ordering spare parts and accessories. Type designation, vehicle identification 2 HFGDOIHV number, maximum permissible weights, HFGJJFFOI BFDRYOIHV codes for colour and upholstery and type Gfdr_urtvb Seyj_tu Seyj_tu Fkfu Fkfu approval number. Ohtk_jdtr Mgdh_ ytegf Ehdfjljl_ncy Decal for parking heater. The engine oil decal specifies oil grade and viscosity. 3 Engine type designation, component and serial number. Gearbox type designation and serial number. 06 Manual gearbox Automatic gearbox 4 5 6 30748043 A P 1208632 3,77 Car’s identification number. (VIN Vehicle T 100001 M56L Identification Number)

AISIN AW CO LTD B MADE IN JAPAN TF-80SC 3YYYYYYY SERIAL NO 0300444s

214 06 Maintenance and specifications

Specifications

Dimensions and weights WARNING Dimensions cm The car’s driving characteristics change depending on how heavily it is loaded and how Length 485 the load is distributed. 1 2 Height 150

Width 189

Wheelbase 284 1 0300446s Front track 158 – 159 2 Only China

Rear track 158 – 159 3 Gross vehicle weight Maximum trailer weight Weights 4 Max. load: See registration document. Kerb weight includes the driver, the fuel tank 0300445s Max. roof load: 100 kg. 90 % full and all fluids. The weight of passen- 06 gers and accessories, such as a towbar, load For information on decal location, see page 214. carriers, space box etc. and towball load Gross vehicle weight (when a trailer is hitched, see table), influenc- Max. front axle load es the payload and must not be included in Max. rear axle load the kerb weight. Permitted weight (in addition to driver) = Gross vehicle weight – Kerb Max. train weight (car+trailer) weight.

215 06 Maintenance and specifications

Specifications

Towing capacity and towball load Towball load Model Gearbox Trailer weight with brake (kg) (kg)

All All 0 – 1200 50

2.5T Manual (M66) max. 1800 75

Automatic (TF–80SC) max. 1800 75

3.2 Automatic (TF–80SC) max. 1800 75

V8 Automatic (TF–80SC) max. 2000 90

2.4D Manual (M66) max. 1600 75

Automatic (TF–80SC) max. 1800 75

D5 Manual (M66) max. 1600 75

Automatic (TF–80SC) max. 2000 90 06

Trailer weight without brake (kg) Towball load (kg)

max. 750 50

NOTE The use of stabilising devices is recommended with trailers heavier than 1800 kg.

216 06 Maintenance and specifications

Specifications

Engine specifications

Specification/Model 2.5T 3.2 V8 D5 2.4D

Engine designation B5254T6 B6324S B8444S D5244T4 D5244T5

Output (kW/rpm) 147/4500 175/6200 232/5950 136/4000 120/4000

Output (hp/rpm) 200/4800 238/6200 315/5950 185/4000 163/4000

To r q u e ( N m / r p m ) 300/1500-4500 320/3200 440/ 3950 400/2000-2750 340/1750-2750

No. of cylinders 5 6 8 5 5

Bore (mm) 83 84 94 81 81

Stroke (mm) 93.2 96 79.5 93,1 93,1

Swept volume (litres) 2.521 3.192 4.414 2.400 2.400 06 Compression ratio 9.0:1 10.8:1 10.4:1 17.0:1 17.0:1

217 06 Maintenance and specifications

Specifications

Engine oil Volvo recommends oil products.

Adverse driving conditions IMPORTANT Adverse driving conditions can lead to ab- In order to fulfil the requirements for the en- normally high oil temperature or oil con- gine’s service intervals all engines are filled sumption. with a specially adapted synthetic engine oil at the factory. The choice of oil has been Check the oil level more frequently for long made very carefully with regard to service journeys: life, starting characteristics, fuel consump- • towing a caravan or trailer. tion and environmental impact. An approved engine oil must be used in order that • in mountainous regions. the recommended service intervals can be applied. Only use a prescribed grade of oil

• at high speeds. 2200331s (see the engine compartment decal) for • in temperatures colder than –30 C or both filling and oil change, otherwise you Viscosity chart hotter than +40 C will risk affecting service life, starting char- • shorter driving distances (shorter than acteristics, fuel consumption and environ- 10 km) at low temperatures (under 5 C) mental impact. Volvo Car Corporation disclaims all warranty liability if engine oil of Choose a fully synthetic engine oil for ad- the prescribed grade and viscosity is not verse driving conditions. It provides extra used. 06 protection for the engine.

218 06 Maintenance and specifications

Specifications

The following applies when the adjacent decal is fitted in the car’s engine compartment. For information on decal location, see ATTENTION!ATTENTION! page 214. EngineEngine ooilil qqualityuality AACEACEA AA5/B55/B5 Oil grade: ACEA A5/B5 ViscosityViscosity SSAEAE 00W-30W-30 Viscosity: SAE 0W–30 2200329s

Volume between MIN and MAX Engine variant Volume (litres) (litres)

2.5T B5254T6 1.3 5.5 06 3.2 B6324S 0.8 7. 3

V8 B8444S 1.1 7. 0

D5 D5244T4 1.5 6.0

2.4D D5244T5 1.5 6.0

219 06 Maintenance and specifications

Specifications

Other fluids and lubricants

Fluid System Volume (litres) Prescribed grade

Gearbox oil Manual (M66) 2.0 Transmission fluid MTF 97309 Automatic (TF–80SC) 7. 0 Transmission fluid JWS 3309 Coolant Petrol engine 3.2 8,9 Coolant with corrosion inhibitor mixed with water, see packaging. Petrol engine 2.5T 9.0 Petrol engine V8 10.2 Diesel engine 12.5

Air conditioning1 - - Oil: PAG Refrigerant: R134a (HFC134a) Brake fluid 0.6 DOT 4+ Power steering 1.2 Power steering fluid WSS M2C204-A2 or equivalent product. Washer fluid 6.5 Use a washer antifreeze recommended by 06 4.52 Volvo, mixed with water.

1Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the correct information. 2Cars without headlamp washing

NOTE Under normal driving conditions the gearbox oil does not need changing during its service life. However, it may be necessary under adverse driving conditions, see page 218.

220 06 Maintenance and specifications

Specifications

Consumption, emissions and volume

Emissions of Tank Consumption Model Engine Gearbox carbon dioxide volume litre/100 km (CO2) g/km (litres)

2.5T B5254T6 Manual (M66) 9.4 224 70

Automatic (TF–80SC) 10.2 244

3.2 B6324S Automatic (TF–80SC) 9.8 234

AWD Automatic (TF–80SC) 10.7 255

V8 B8444S Automatic (TF–80SC) 11.9 284

D5 D5244T4 Manual (M66) 6.4 169

Automatic (TF–80SC) 7. 3 193 06 2.4D D5244T5 Manual (M66) 6.3 167

Automatic (TF–80SC) 7. 2 189

Fuel consumption and emissions of equipped with extra equipment that affects carbon dioxide the car’s weight. The manner in which the car Official fuel consumption figures are based is driven, and other non-technical factors can on a standard driving cycle in accordance also affect fuel consumption. For more infor- with EU Directive 80/1268 comb. Fuel con- mation, see page 9. sumption figures may change if the car is

221 06 Maintenance and specifications

Specifications

Electrical system Type approved remote control system 1Delphi VDO hereby certifies that this remote control system conforms to the essential charac- General Country teristic requirements and other relevant regulations of directive 1999/5/EU. 12 volt system with a voltage-regulated alter- 2 nator. Single pole system in which the chas- A, B, CY, CZ, 1 Information not available at time of going to press. sis and engine block are used as conductors. D, DK, E, EST, F, FIN, GB, GR, The negative terminal is connected to the H, I, IRL, L, LT, chassis. LV, M, NL, P, PL, S, SK, SLO Performance, battery IS, LI, N, CH

Engine 2.5T V8 D5 HR

Voltage (V) 12 12 12 ROK Delphi 2003-07-15, Germany R-LPD1-03-0151 Cold start 520 – 600 – 700 capacity (A) 800 800 BR 2

Reserve 100 – 120 – 150 135 06 capacity 150 (min)

IMPORTANT RC If the battery is replaced, replace it with a CCAB06LP1940T4 battery of the same cold start capacity and reserve capacity as the original (see the decal on the battery).

222 06 Maintenance and specifications

223 Alphabetical index

A Airbags Audio system ...... 109 activating/deactivating, PACOS ...... 18 Audio volume A/C ...... 103 Alarm ...... 45 media player ...... 142 ABL – Active Bi-Xenon Lights ...... 65 alarm indicator ...... 45 phone ...... 142 ABS ...... 87 alarm signals ...... 46 phone/media player ...... 147 ACC – Adaptive cruise control ...... 123 arming ...... 45 ring signal, phone ...... 142 Adapting driving characteristics ...... 121 checking the alarm ...... 36 AUTO deactivating a triggered alarm ...... 46 Adaptive cruise control ...... 123 climate control settings ...... 103 disarming ...... 46 preset storage ...... 115 radar sensor ...... 124 other functions ...... 46 Auto. volume control ...... 112 Additional heater ...... 108 RDS traffic warning ...... 116 Automatic car washes ...... 210 Adjusting headlamp pattern ...... 69 temporary disarming ...... 47 testing the alarm system ...... 47 Automatic dimming ...... 78 Active Bi-Xenon headlamps ...... 69, 70 All Wheel Drive (AWD) ...... 86 Bi-Xenon headlamps ...... 69, 70 Automatic gearbox ...... 84 halogen headlamps ...... 70 Allergy and asthma inducing substances .100 manual gear positions (Geartronic) ...... 85 Adjusting the steering wheel ...... 63 Anti-skid ...... 120 Automatic locking ...... 42 Adverse driving conditions ...... 218 Approach lighting ...... 69 Automatic relocking ...... 42 AF – automatic frequency update ...... 117 Audio AUX ...... 109, 112 Air conditioning audio system ...... 109 volume ...... 112 general ...... 99 headphones socket ...... 110 B Air conditioning, A/C ...... 103 profile for seats ...... 112 Backrest 07 Air distribution ...... 101, 105 settings ...... 112 source ...... 112 front seat, lowering ...... 60 Air quality system ...... 104 surround ...... 112 rear seat, lowering ...... 159 Air vents ...... 101 volume ...... 112 Bass speaker ...... 112 Airbag ...... 15 volume, auto. volume control ...... 112 Battery ...... 83, 186 volume, external audio source ...... 112 AIRBAG system ...... 14 handling ...... 186 volume, programme types ...... 117 maintenance ...... 186 Audio files ...... 113

224 Alphabetical index

remote control key/PCC ...... 39 Bulbs, replacement ...... 177 Child replacement ...... 187 cargo area lighting ...... 182 location in the car ...... 26, 28 specifications ...... 222 courtesy lighting ...... 182 Child safety ...... 25 warning symbols ...... 186 dipped beam, halogen ...... 178 Child safety locks ...... 30 Blind spot ...... 132 direction indicators ...... 179 Child safety products ...... 26 Blind Spot Information System, BLIS ...... 132 extra main beam ...... 179 Child seat BLIS ...... 132 front fog lamps ...... 180 main beam, halogen ...... 178 child seats and airbags ...... 17 Bluetooth parking lamps ...... 179 fixture system ...... 28 handsfree ...... 140 position lamps ...... 179 Child seats ...... 26 secrecy ...... 142 rear lamps ...... 180 Cigarette lighter Boot lid side marker lamps ...... 180 rear seat ...... 137 locking ...... 35, 43 vanity mirror ...... 182 Cigarette lighter socket Brake and clutch fluid ...... 176 C front seat ...... 136 Brake lights ...... 66 Call waiting ...... 145 Clean Zone Interior ...... 100 Brakes ...... 87 Calls Cleaning anti-lock braking system, ABS ...... 87 functions during a call ...... 145 automatic car washes ...... 210 brake fluid, volume and grade ...... 221 making and receiving ...... 141, 145 car wash ...... 210 brake lights ...... 66 Car care ...... 210 rims ...... 210 brake system ...... 87 Car upholstery ...... 211 seatbelts ...... 211 electric parking brake ...... 89 upholstery ...... 211 emergency brake assistance ...... 87 Car wash ...... 210 Climate control ...... 99 emergency brake assistance, EBA ...... 87 Cargo area mat ...... 139 07 emergency brake light, EBL ...... 66 general ...... 99 Catalytic converter ...... 157 filling brake fluid ...... 176 sensors ...... 99 parking brake general ...... 89 CD Climate control system, electronic ...... 102 symbols in the combined instrument changer ...... 113 Clock ...... 58 panel ...... 88 functions ...... 113 Collision ...... 25 Built-in phone ...... 145 Chassis settings ...... 121 Collision warning system ...... 127

225 Alphabetical index

radar sensor ...... 124 Display lighting ...... 64 Emergency equipment Collision warning system with brake Dolby Surround Pro Logic II ...... 109, 112 first aid kit ...... 138 support* ...... 127 Door mirrors ...... 77 warning triangle ...... 161 Colour code, paint ...... 212 Emissions of carbon dioxide ...... 221 Driving Comfort inside the passenger Engine under adverse driving conditions ...... 218 compartment ...... 135 Driving in water ...... 152 overheating ...... 162 Compass ...... 119 starting ...... 81 Driving with a trailer ...... 162 adjusting the zone ...... 119 Engine compartment towball load ...... 216 calibration ...... 119 bonnet ...... 172 towing weight ...... 216 Condensation ...... 156 coolant ...... 175 trailer weight ...... 215 general ...... 172 Condensation in headlamps ...... 210 DSTC, see also Stability system oil ...... 174 Coolant level ...... 175 deactivating/activating ...... 120 overview ...... 173 Cruise control ...... 122 operation ...... 120 power steering fluid ...... 176 D E Engine specifications ...... 217 Environment Deadlocks ...... 44 ECC – electronic climate control ...... 102 clean air in the passenger compartment .8 deactivation ...... 44 Economical driving ...... 152 efficient emission control ...... 8 Deep water ...... 152 Electric parking brake fuel consumption ...... 8 Defroster ...... 104 low battery voltage ...... 89 reducing environmental impact ...... 8 Diesel filter ...... 156 releasing automatically ...... 89 textile standard ...... 8 releasing manually ...... 89 Volvo Cars’ environmental philosophy .... 8 07 Diesel particle filter ...... 82 Electrical socket Volvo workshops and the environment ... 8 Dimensions ...... 215 cargo area ...... 138 EON – Enhanced Other Networks ...... 117 Dipped beam ...... 178 front seat ...... 137 Equalizer ...... 112 rear seat ...... 137 Direction indicators ...... 67 External audio source Electrical system ...... 222 Disc text ...... 114 AUX output ...... 109 Electronic immobiliser ...... 34 Disengaging the gear selector inhibitor ...... 86 volume ...... 112 Emergency calls ...... 149

226 Alphabetical index

Extra main beam ...... 179 G Heated washer nozzles ...... 74 Heating ...... 103 F Gear selector inhibitor ...... 85 rear window ...... 78 Fan ...... 102 Gear selector inhibitor, mechanical disengagement ...... 86 seats ...... 103 Fast-wind CD ...... 114 High engine temperature ...... 162 Gearbox ...... 84 Floor mats ...... 136 High-pressure headlamp washing ...... 74 automatic ...... 84 Fluids manual ...... 84 Holder for glass and bottle opener ...... 139 capacities ...... 220 Geartronic ...... 85 Home safe lighting ...... 69 Fog lamp Glass Hoot ...... 63 rear ...... 67 coating ...... 75 Horn ...... 63 Fog lamps laminated/reinforced ...... 75 front ...... 66 surface treated ...... 75 I Global opening ...... 35, 99 Foot brake ...... 87 IAQS – Interior Air Quality System ...... 100 Glovebox ...... 136 Four-C ...... 121 IC – Inflatable Curtain ...... 20 locking ...... 43 Frequency update, automatic ...... 117 IDIS – Intelligent Driver Information Gross vehicle weight ...... 215 Front fog lamps ...... 66 System ...... 147 Fuel ...... 156 H Ignition positions ...... 59 consumption ...... 221 Hazard warning flashers ...... 67 Ignition switch ...... 59 fuel consumption ...... 8 HBS – Heart Beat Sensor ...... 37 IMEI number ...... 148 fuel economy ...... 209 Head restraint, centre seat ...... 62 Immobiliser ...... 34 fuel filter ...... 156 Headlamp levelling ...... 64 07 Fuse box Important information ...... 6 Active Bi-Xenon headlamps ...... 64 cargo area ...... 193 Bi-Xenon headlamps ...... 64 Incoming calls ...... 141, 145 engine compartment ...... 190 Headlamp pattern, adjusting ...... 69, 70 Indicator lamps, PCC ...... 36 glovebox ...... 192 Headlamps ...... 65, 177 Indicator symbols ...... 54 location ...... 189 headlamp washing ...... 74 Fuses ...... 189 Indicators ...... 67 Headphones socket ...... 110 Inflatable Curtain ...... 20

227 Alphabetical index

Information and warning symbols ...... 54 L in the passenger compartment ...... 68 Information button ...... 36 instrument lighting ...... 64 Laminated glass ...... 75 main/dipped beam ...... 65 Information displays ...... 54 Lamps position/parking lamps ...... 66 Instrument lighting ...... 64 cargo area lighting ...... 182 replacing bulbs, see also Bulbs ...... 177 Instrument overview ...... 50 courtesy lighting ...... 182 Loading ...... 158 Instruments and controls ...... 50 dipped beam ...... 178 cargo area ...... 158 Integrated booster cushion ...... 28 direction indicators ...... 179 load retaining eyelets ...... 158 Interior lighting ...... 68 extra main beam ...... 179 roof load ...... 161 front fog lamps ...... 180 Location of child seats ...... 26 Interior rearview mirror ...... 78 general ...... 177 Locks ISOFIX fixture system for child seats ...... 28 headlamps ...... 177 automatic locking ...... 42 main beam ...... 178 J boot lid ...... 42 number plate lighting ...... 181 glovebox ...... 42 Jump starting ...... 83 parking lamps ...... 179 lock button on inside ...... 42 position lamps ...... 179 K locking ...... 42 rear lamps ...... 180 unlocking ...... 42 Kerb weight ...... 215 side marker lamps ...... 180 Low oil level ...... 174 Key ...... 34 specifications ...... 183 Lubricants ...... 220 keyless lock and ignition system ...... 40 vanity mirror ...... 182 PCC ...... 34 Light switches ...... 64 M remote control key ...... 34 Lighting Main/dipped beam ...... 65 Key blade ...... 37 Active Bi-Xenon Lights, ABL ...... 65 07 Maintenance Keyless drive ...... 40, 81 adjusting headlamp pattern ...... 70 rustproofing ...... 211 Keyless start (keyless drive) ...... 81 approach lighting ...... 69 automatic ...... 68 Making calls ...... 141, 145 Keylock ...... 85 control ...... 68 Manual gear positions (Geartronic) ...... 85 Keypad in the steering wheel ...... 63 fog lamp, rear ...... 67 Manual gearbox ...... 84 right-hand side ...... 109 front fog lamps ...... 66 headlamp levelling ...... 64 Media player ...... 112 home safe lighting ...... 69 Memory function in seats ...... 61

228 Alphabetical index

Menus and messages ...... 94 O Passenger compartment filter ...... 100 Messages in the combined PCC – Personal Car Communicator Oil instrument panel ...... 97 functions ...... 35 adverse driving conditions ...... 218 Meters in the combined instrument panel ..54 range ...... 37 capacities ...... 219 Phone ...... 145 Mirror engine oil ...... 218 heated ...... 78 filter ...... 174 built-in, overview ...... 145 interior ...... 78 gearbox oil ...... 220 calling from the phone book ...... 147 Mirrors oil grade ...... 218 connect ...... 143 power steering fluid ...... 220 handsfree ...... 140 door ...... 77 Oil level ...... 174 incoming calls ...... 141 Misting making calls ...... 141 Overheating ...... 162 attending to the windows ...... 99 phone book, shortcut ...... 143 condensation in headlamps ...... 210 P receiving a call ...... 142, 145 remove with the air vents ...... 105 register phone ...... 141 PACOS ...... 18 removing with defroster function ...... 104 standby mode ...... 145 timer function ...... 104 Paint Phonebook Mobile phone colour code ...... 212 using numbers ...... 147 connect ...... 143 Paintwork PI seek ...... 117 handsfree ...... 140 damage and touch-up ...... 212 Polishing ...... 211 register phone ...... 141 stone chips and scratches ...... 212 Position/parking lamps ...... 66 MP3 functions ...... 113 Panel lighting ...... 64 Power steering fluid ...... 176 MY KEY ...... 110 Panic function ...... 36 Power sunroof ...... 79 07 N Parking assistance ...... 130 Power windows ...... 75 NEWS ...... 116 Parking brake ...... 89 Pregnancy ...... 13 News broadcast ...... 116 electric ...... 89 low battery voltage ...... 89 Preset storage ...... 115 Parking heater ...... 106 Programme functions ...... 115 parking on a hill ...... 106 Programme type ...... 116 time setting ...... 107

229 Alphabetical index

PTY – Programme type ...... 116 Rear bulbs Rims Putting calls on hold ...... 145 location ...... 181 cleaning ...... 210 R Recirculation ...... 104 RND – Random ...... 114 Recommendations during driving ...... 152 Rustproofing ...... 211 Radar sensor ...... 124 Recovery ...... 169 Radio S Refrigerant ...... 99 AF ...... 117 Safety ...... 12 Refrigerator ...... 139 EON ...... 117 Safety in the passenger compartment ...... 12 Refuelling frequency update ...... 117 Safety mode ...... 25 preset storage ...... 115 fuel cap ...... 155 SCAN PTY ...... 116 fuel filler flap, electrical opening ...... 155 radio text ...... 117 fuel filler flap, manual opening ...... 155 CD and audio files ...... 114 REG ...... 117 Refuse calls ...... 141, 145 radio stations ...... 115 settings ...... 115 Seat REG – Regional radio programmes ...... 117 stations ...... 115 power seat ...... 60 Remote control key ...... 34, 35 Rain sensor ...... 73 Seatbelt reminder ...... 13 battery ...... 35 Random, CD and audio files ...... 114 Seatbelt tensioner ...... 14 detachable key blade ...... 34 RDS functions ...... 115 range ...... 36 Seatbelts ...... 12 resetting ...... 117 replacing the battery ...... 39 Seats ...... 60 Reading the Owner’s Manual ...... 6 Remote control system, type approved ... 222 head restraints, rear ...... 62 "Important" dialogue boxes ...... 6 Remote control, see Remote control key ... 34 heating ...... 103 "Warning" dialogue boxes ...... 6 07 Resetting the door mirrors ...... 77 key memory ...... 61 message texts ...... 6 lowering the front backrest ...... 60 Resetting the power windows ...... 76 note dialogue boxes ...... 6 lowering the rear backrests ...... 159 options ...... 6 Retractable door mirrors ...... 77 manual setting ...... 60 point lists ...... 6 Retractable power door mirrors ...... 77 memory function ...... 61 position lists ...... 6 power seats ...... 60 Reverse gear inhibitor ...... 84 procedure lists ...... 6 ventilated front seats ...... 102 Service locking ...... 38

230 Alphabetical index

Service programme ...... 172 right-hand keypad ...... 109 Towbar ...... 163 Side airbags ...... 18 steering wheel adjustment ...... 63 Towing ...... 169 Steering wheel keypad Signal input, external ...... 109 towing eye ...... 169 left-hand side ...... 122 SIM card ...... 149 Towing bracket ...... 163 Stone chips and scratches ...... 212 SIPS bags ...... 18 Towing weight ...... 216 Storage spaces in the passenger TP – traffic information ...... 116 Ski hatch ...... 159 compartment ...... 135 Traction control ...... 120 Soot filter full ...... 82 Sunroof Traffic information ...... 116 Spare wheel ...... 198 blocking during automatic closing .. 79, 80 Specifications ...... 215 opening and closing ...... 79 Trailer sunscreen ...... 80 Spin control ...... 120 driving with a trailer ...... 162 ventilation position ...... 79 trailer weight ...... 215 SRS AIRBAG ...... 15 Surround ...... 109, 112 Transmission ...... 84 SRS system Symbols ...... 120 Trip computer ...... 118 general ...... 16 indicator symbols ...... 54 Trip meter ...... 58 Stability and traction control system ...... 120 information symbols ...... 54 Type approved, remote control system .... 222 Stability system ...... 120 warning symbols ...... 54 Type designation ...... 214 Stains ...... 211 T Type designations ...... 214 Standby mode, phone ...... 145 Tank volume ...... 221 Tyres Starting the engine ...... 81 Temperature direction of rotation ...... 194 Station search ...... 115 actual temperature ...... 99 maintenance ...... 196 07 Steering force level, speed adapted ...... 121 Temperature control ...... 103 pressure ...... 208 Steering lock ...... 81 Testing the alarm system ...... 47 puncture ...... 198 specifications ...... 207 Steering wheel Timer ...... 104 speed ratings ...... 207 Total airing function ...... 35, 99 keypad ...... 145 tread wear indicators ...... 196 keypad, adaptive cruise control ...... 125 Towball load ...... 216 winter tyres ...... 197 keypad, left-hand side ...... 122

231 Alphabetical index

U Warning sound Wheels and tyres ...... 194 adaptive cruise control ...... 123 Whiplash injury WHIPS ...... 21 Unlocking collision warning system ...... 128 WHIPS ...... 21 boot lid ...... 42 Warning symbol, AIRBAG system ...... 14 Whiplash Protection System ...... 21 from inside ...... 42 Warning triangle ...... 161 from outside ...... 42 Windows, rearview and door mirrors ...... 75 Washer keyless ...... 42 Windscreen washing ...... 74 headlamps ...... 74 V windscreen ...... 74 Windscreen wipers ...... 73 Vanity mirror ...... 182 Washer nozzles, heated ...... 74 Winter tyres ...... 197 Ventilation ...... 101 Washers Wiper blades Vibration damper ...... 164 washer fluid, filling ...... 185 cleaning ...... 184, 185 Volume, audio ...... 112 Washing the car ...... 210 replacement ...... 184 Water and dirt-repellent coating ...... 75 service position ...... 184 Volume, see also Audio volume ...... 112 Waxing ...... 211 Wipers and washing ...... 73 W Weights Warning lamp front axle load ...... 215 adaptive cruise control ...... 123 gross vehicle weight ...... 215 collision warning system ...... 128 kerb weight ...... 215 stability and traction control system ....120 maximum train weight ...... 215 Warning lamps ...... 54 rear axle load ...... 215 roof load ...... 215 Airbags SRS ...... 56 07 towball load ...... 215 alternator not charging ...... 56 trailer weight ...... 215 fault in brake system ...... 56 Wheels low oil pressure ...... 56 changing ...... 194 parking brake applied ...... 56 fitting ...... 195 seatbelt reminder ...... 56 rims ...... 197 warning ...... 56 snow chains ...... 197 spare wheel ...... 198

232 Volvo. for life