CAFCO® FENDOLITE® M-II (Americas) ISOLATEK® Type M-II (Worldwide) Spray-Applied Fireproofing
PRODUCT DESCRIPTION FIRE TEST PERFORMANCE CAFCO FENDOLITE M-II / ISOLATEK Type M-II for commercial use is a CAFCO FENDOLITE M-II / ISOLATEK Type M-II has been extensively vermiculite and Portland cement based, wet mix, high density Spray-Applied tested for fire resistance and is rated for up to 4 hours for floor assemblies, Fire Resistive Material (SFRM) designed to provide fire protection to structural beams, joists, columns, roof assemblies and walls and partitions. columns and beams in exterior environments and interior situations where the • Classified by UL in accordance with ANSI/UL 263 (ASTM E119) highest levels of abrasion resistance and hardness are necessary. CAFCO • Classified by UL in accordance with CAN/ULC-S101 (ASTM E119) FENDOLITE M-II / ISOLATEK Type M-II is ideally suited for areas such as CAFCO FENDOLITE M-II / ISOLATEK Type M-II has also been tested industrial processing/ manufacturing areas, mechanical rooms, and parking for surface burning characteristics in accordance with ASTM E84 and is garages. rated Class A. Although CAFCO FENDOLITE M-II / ISOLATEK Type M-II is one-third the Flame Spread...... 0 Smoke Developed...... 0 density of concrete, thus significantly reducing dead load, it is also highly durable and resistant to cracking or spalling under mechanical impact.CAFCO In addition CAFCO FENDOLITE M-II / ISOLATEK Type M-II has also FENDOLITE M-II / ISOLATEK Type M-II may be used in either boxed or been extensively tested for fire resistance when subjected to Gas contour designs and the finish may be spray-textured or troweled smooth. For Explosion (3 Bar Overpressure) and Resistance to Jet Fire tests. areas where spraying is impractical or not permitted CAFCO FENDOLITE TG • Rated J 30 in accordance with ISO 22899-1:2007(E) / ISOLATEK Type TG is developed for application only by trowel. In addition to its fire resistive properties, this material also provides thermal CODE COMPLIANCES benefits. As a thermal insulator it is effective in reducing heat loss, particularly CAFCO FENDOLITE M-II / ISOLATEK Type M-II satisfies the requirements of the following: when applied to the underside of a roof deck. The R-value added by CAFCO ® ® FENDOLITE M-II / ISOLATEK Type M-II may also allow a reduction in roof • IBC - INTERNATIONAL BUILDING CODE insulation. • City of Los Angeles (LADBS, Category 1 Material) • NBC - National Building Code of Canada PRODUCT ADVANTAGES • ICC-ES, AC23 and AC10 Requirements (UL ER13348-01) • Proven durability with over 30 years of service throughout the world • Extensively tested to the latest industry fire standards MAJOR SPECIFICATIONS • Can be used as a hard topcoat over other CAFCO / ISOLATEK SFRMs to CAFCO FENDOLITE M-II / ISOLATEK Type M-II complies with the obtain increased levels of abrasion and impact resistance requirements of the following specifications: • Lightweight formulation results in reduced dead loads • MasterSpec®, Section 078100 - APPLIED FIREPROOFING (AIA) • Available in both spray and trowel grades • MasterFormat® 2014, Section 07 81 00 Applied Fireproofing (CSC,CSI) • Unified Facilities Guide Specification, UFGS-07 81 00 Spray-Applied Thermal Performance Fireproofing (USACE, NAVFAC, AFCEC, NASA) Product Conductivity(k)* Resistance (R/inch) • Master Construction Specifications, Number 07 81 00 Applied CAFCO FENDOLITE M-II 1.14 BTU in/hr ft2 @ 75°F Fireproofing (VA) 0.88 / ISOLATEK Type M-II (0.164 W/m•K) • Code of Federal Regulations, Title 40: Protection of the Environment (EPA) *When tested in accordance with ASTM C518 • PBS-P100 Faclities Standards for the Public Buildings Services (GSA) Physical Performance Characteristic ASTM Method Industry Standard Performance* Laboratory Tested Performance** Density E605 40-44 pcf (641-705 kg/m3) 44.1 pcf (706 kg/m3) Durometer Hardness D2240 40 40 (Shore D) Combustibility E136 Noncombustible Noncombustible Cohesion/Adhesion E736 1,000 psf (47.9 kPa) 16,154 psf (773.5 kPa) Deflection E759 No Cracks or Delaminations No Cracks or Delaminations Bond Impact E760 No Cracks or Delaminations No Cracks or Delaminations Compressive Strength E761 43,200 psf (2,068 kPa) 79,211 psf (3,792.6 kPa) Air Erosion Resistance E859 Less than 0.025 g/ft2 (0.27 g/m2) 0.000 g/ft2 (0.000 g/m2) Corrosion Resistance E937 Does Not Promote Corrosion of Steel Does Not Promote Corrosion of Steel Fungal Resistance G21 No Growth After 28 Days Passed * Standard performance based on MasterSpec®, Section 078100 APPLIED FIREPROOFING. Refer to UL design for density requirement. ** Values represent independent laboratory tests under controlled conditions.
Technical Data Sheet representatives and recognized applicators. For detailed product information or for the name of the sales representative in your area please contact us. us. contact please area your in representative sales the of name the for or information product detailed For applicators. recognized and representatives We our customers support with unsurpassed and complemented technical expertise by customer service, an extensive global of network sales experienced 1.4.3 1.4.3 1.4.2 1.4.1 1.4 1.3.5 1.3.4 1.3.3 1.3.2 1.3.1 1.3 1.2.2 1.2.1 1.2 1.1.2 1.1.1 1.1 1–GENERAL PART request. upon media various on available are Resistive specification. Materials Fire language Spray-Applied for specifications outline/short Complete an is following The FIREPROOFING -APPLIED 078100 SECTION owner s failure to follow the recommendations set forthin Isolatek International sthe recommendations to follow failure publications. owner s The saleoftheseproductsshall besub ecttothe Terms andConditionssetforth or property general contractor s, damages, or for losses of responsible propertydamage,bodily in uries,conse uential any kind that arise from or are related to the applicator s on theinformationcontainedinthis not relymerely should of theseproducts,and application use and concerning publications Technical DataSheet.IsolatekInternationalisnot general contractor, property ownerand/oruser ST read, understandandfollowthe directions, specifications and/or recommendations set forth in Isolatek International s with recognizedstandardmethodsundercontrolledconditions. in accordance on testsconducted based reflect our expectations data herein The performance The applicator, G. G. H. H. C. C. D. A. A. E. E. B. B. F. F. J. J. I. I. INSPECTIONS, SPECIAL AND TESTS 17 STRUCTURAL CHAPTER IBC of List Equipment and Materials. (ULC) Canada of Laboratories Underwriters Resistance Directory. Fire (UL) Laboratories Underwriters Materials. and Construction Building of Tests Fire of Methods Standard – ULC–S101 / CAN Fire- Sprayed Resistive Materials to Applied Members. Structural by Steel of Corrosion – E937 ASTM Members. Structural to Applied Materials Fire-Resistive Sprayed of Erosion Air – E859 ASTM Members. Sprayed Structural to of Applied Materials Strength Fire-Resistive Compressive – E761 ASTM of Bonding on Members. Structural Impact to Applied of Materials Fire-Resistive Effect Sprayed – E760 ASTM Fire- Resistive Materials to Applied Members. Structural Sprayed of Deflection of Effect – E759 ASTM Resistive Materials to Applied Members. Structural Fire- Sprayed of – Cohesion/Adhesion E736 ASTM Members. Sprayed Structural to Applied of Materials Density Fire-Resistive and Thickness – E605 ASTM Construction Building and Materials. of Tests Fire – E119 ASTM of Characteristics Burning Building Materials. Surface – E84 ASTM References FIRESTOPPING –JOINT 078443 SECTION FIREPROOFING –INTUMESCENT 078123 SECTION INSULATION –THERMAL 072100 SECTION DECKING –STEEL 053100 SECTION FRAMING STEEL –STRUCTURAL 051200 SECTION Related Sections other applicable authorities having jurisdiction. and architect the from obtained be shall densities work, protection approval of the proposed material fire thicknesses and the with proceeding Before similar manufacturer. or protection approvedby the spray-applied fire resistive material fire of materials. This firm shallbe recognized or installation otherwise expertise with the firm a in by performed be shall Work Quality Assurance authorities having jurisdiction. all of requirements code building applicable the The material and installation shall to conform Documents. Contract the of requirements all with applicable accordance in and herein, specified where or drawings the on shown as work and related protection fire sprayed all of installation proper and complete the to, incidental and for, necessary services and equipment materials, labor, all Provide included Work ® NENTOA BIDN CODE BUILDING INTERNATIONAL Section 1705 Special Inspections. Special 1705 Section CAFCO ® Isolatek Internationalprovidespassive fireproofing materialsundertheCAFCO FENDOLITE ®
2.2.1.2 2.2.1.1 2.2.1 2.2 2.1.1 2.1 2–PRODUCTS PART 1.8.2 1.8.1 1.8 1.7.2.1 1.7.2 1.7.1 1.7 1.6.2 1.6.1 1.6 1.5.2 1.5.1 1.5 1.4.4 throughout the Americas andundertheISOLATEK Manufacturer’s Data: Manufacturer’s Submit Manufacturer’s Submittals 12-A Guide. Annotated an Materials; Manual Resistive Fire Sprayed Field-Applied of Technical Inspection and Testing the for Practice Standard Publication: AWCI ASTM E760, the material shall not crack or or crack applied. is it galvanized which not to deck topped shall concrete the from material delaminate with the accordance E760, in ASTM tested When Impact: Bond span. the of of 1/120th deflection adownward in resulting centerload vertical deck time aone to subjected is galvanized applied is it which to topped non-concrete delaminate the or when crack not shall material the E759, ASTM with accordance in tested When Deflection: and specifications drawings, test criteria. following applied the to M-II) conform Type to ISOLATEK designation: (UL/ ULC M-II FENDOLITE CAFCO be shall Materials Materials producers. authorized by name, brand /ISOALTEK CAFCO the under manufactured be shall material resistive fire spray-applied The Acceptable Manufacturers avoid to work progress. job protection in delays fire of scheduling and coordination the in cooperate shall Contractor The floor. next the to proceeding before onwork completed beshall a floor protection All fire Sequencing/Scheduling necessary. be may exchanges and shafts, smallstairwells, rooms, additional air basements, as such areas enclosed in spraying When dry. is air material the until complete hour per 4 exchanges than less be not must Ventilation and during subsequentprotection to its application. fire of sprayed the drying proper to allow ventilation General Contractor must provide adequate levels. heat to maintain proper temperatures and humidity shall Contractor General provide and enclosures progress, job for necessary If fire material. resistive spray-applied of application after hours 24 of shall be maintained to, prior during, and a(4°C) minimum 40°F of temperature minimum ambient a and (4°C), atsubstrate 40°F than temperature less is outdoor building the prevailing the When Project Conditions used. be not must use for unsuitable found packages Damaged weather. the from protected location, adry in ground, above materials Store fire- and hazard fire resistance classifications. for labels UL the bear shall trade to Packaging data. as identifying other and type name, identified fully packages, unopened Deliver materials to the project in manufacturer’s Delivery, Storage and Handling criteria. performance specified all for submitted be shall results test laboratory Independent Test Data: may as Documents. Contract certification with compliance material show to required be including specification, ISOLATEK INTERNATIONAL is registered with the ® AIA Continuing Education System (AIA/CES) System Education Continuing AIA M-II /ISOLATEK M-II in theCompany s invoices. 2.2.3 2.2.3 2.2.2 2.2.1.8 2.2.1.7 2.2.1.6 2.2.1.5 2.2.1.4 2.2.1.3 3.1.4 3.1.4 3.1.3 3.1.2 3.1.1 3.1 3–EXECUTION PART 2.2.5 2.2.4 ® Joists ___hr. Joists Columns ___hr. ___hr. Girders ___hr. Beams ___hr. assemblies Roof Floor assemblies ___hr. ratings: following the achieve to density be shall applied at the appropriate minimum thickness and materials resistive fire Spray-applied ULC-S101. CAN/ or E119) (ASTM 263 UL of procedures the with accordance in (ULC) Canada of Laboratories by Underwriters Laboratories (UL) or Underwriters classified and tested been have shall material The havingthe authority jurisdiction. by required as or design ULC / UL minimum appropriate the the in listed meet as values density average and shall individual material the ASTM with E605, accordance in tested When Density: 0 ..... Developed Smoke ...... 0 Spread Flame material the characteristics: E84, ASTM shall exhibit burning the following surface with accordance tested in When Characteristics: Burning Surface promote ofcorrosion not steel. shall material the E937, ASTM with in accordance tested When Resistance: Corrosion kPa). in (2,068 psf 43,200 of force acrushing to subjected testedwhen percent 10 than more deform not When shall material the E761, ASTM with accordance Strength: Compressive meter). square per grams (0.27 ft. sq. per 0.025 grams than greater losses application to finished the subject from be not shall material the E859, ASTM with accordance in tested When Erosion: Air a have (47.9 psf kPa). 1,000 of shall strength bond minimum steel galvanized or uncoated over applied material the E736, ASTM with accordance Cohesion/Adhesionstrength):(bond testedin When the Steel Deck Institute. by set criteria the with accordance in erected and fabricated been has which deck steel to applied be The spray-applied fire resistive material shall only area. an in complete is application of spray-applied fire resistive materials the until place take not shall equipment suspended other or conduit piping, ducts, of installation The resistive materials. others prior to the application of spray-applied fire by placed be to are substrate the to attachments other and sleeves supports, hangers, Clips, the structural steel or steel deck section. the of in outlined as Erector, Steel or responsibility Contractor the General be shall protection fire sprayed receive to surfaces of cleaning Any steel. primed/painted handling on procedures for contacted be shall Manufacturer surface. the to materials which would bonding impair satisfactory foreign other or paints/primers dirt, scale, mill loose grease, oil, of free be shall material resistivespray-appliedfire toreceive surfaces All Preparation request. upon such of certification provide shall no detectable asbestos. Material manufacturer Spray-applied fireresistive materials shallcontain spray-applied fire resistive materials. of application the for used be shall water Potable Type Guide Specification M-II trademarkthroughouttheworld. andFENDOLITE trademarks 3.3.1 3.3 3.2.8 3.2.7 3.2.6 3.2.5 3.2.4 3.2.3 3.2.2 3.2.1 3.2 3.1.5 Canada, Mexico, Europe and the Pacific Basin. Pacific the and strategically Europe Mexico, Canada, recognized from trained, world located production and distribution points in the the U.S., to around available applicators are Resistive Materials Fire Spray-Applied International Isolatek Product Availability 3.4.1 3.4 3.3.2 applied fire resistive material, shall be performed performed be shall material, resistive fire applied All patching of and repair of damaged spray- Repairing and Cleaning recommendations. written manufacturer’s and design resistance fire UL/ULC EBS Type appropriate the per as ISOLATEK applied be shall adhesive / BOND-SEAL CAFCO sprayed. be to intended not surfaces with contact in coming from overspray prevent to coverings suitable other or cloths drop masking, Provide in 1.7.1, 1.7.2.1.and 1.7.2. specified as maintained be shall ventilation and temperature Proper ceased. has traffic roof construction after and placed, been have units completely mechanical all is complete, are roofing penthouses all tight, and the installed until commence not resistive shall deck roof of underside fire the to material spray-applied of application The deck. that on work concrete of completion the to prior be decks floor not steel to shall applied material resistive fire Spray-applied material. resistive fire spray-applied the of application to prior corrected and Contractor by identified General the to known be made and installer the must substrates unsuitable All material. resistive fire spray-applied receive to acceptable protection are and fire applicator the by inspected sprayed been have receive to surfaces that certification until Contractor General the by received been has commence not resistive shall fire material spray-applied of application The instructions. application written manufacturer’s the with accordance in be shall application and mixing Equipment, Application installed as a walkway to distribute loads. case the be in shall pavers as roofing maintenance, periodic of anticipated, is traffic roof When CHAPTER 17 STRUCTURAL TESTS AND AND TESTS Inspections. STRUCTURAL SPECIAL INSPECTIONS, 17 CHAPTER IBC Guide. 12-A Annotated an Materials; Fire-Resistive Manual Sprayed Applied Field of Technical Inspection and Testing the for Practice Standard Publication: AWCI Members. Structural to Applied Materials Fire-Resistive Sprayed of Method Test Standard – E605 ASTM procedures: following the of one with accordance in density and thickness for tested be shall material resistive fire spray-applied The Testing and Inspection General Contractor. and applicator the by to agreed previously extent the to cleaned be shall sprayed be to not surfaces section,equipment shall be removed and all this in work the of completion the After responsible for the damage. trade the by for paid and section this under ® NENTOA BIDN CODE BUILDING INTERNATIONAL Section 1705 Special Special 1705 Section ®
C-TDS-11/19