DOCSLIB.ORG

Spray Buddy Specifications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Spray Buddy Specifications SPRAY BUDDY SPECIFICATIONS GENERAL SPECIFICATIONS PATCH PUMP* SPRAY BUDDY** POWER 1 hp electric inverter drive Std Std SPEED CONTROL Dial-a-Speed electronic speed control Std Std PUMP OUTPUT Variable 0-2.6 gpm or 8 bags/hr 0-1.75 gpm PUMP SIZE Optimized 2L3 rotor & stator Std Std PUMP HOPPER CAPACITY 15 gal or 2/3 bags✝ Std Std PUMP CHARGE HEIGHT 32 in Std Std PRESSURE OUTPUT 250 psi max recommended working pressure Std Std DIRECTIONAL CONTROL Forward and reverse Std Std REMOTE CONTROL 2-wire remote can be extended up to 500 ft 2 wire 60 ft (18 m) lg AFS Auto Reverse OPT. 2 wire 60 ft (18 m) lg WIDTH 26 in HEIGHT 41 in RUGGED LENGTH 54 in WEIGHT 285 lbs with air compressor; 190 lbs without air compressor PRODUCTION POWER REQUIREMENT 60 HZ 110 V 15 A one phase WITH THE EASE OF WHEELS 12 in dia semi solid DRIVE Direct drive lube for life gearbox P OR TA BIL I T Y PUMP OUTLET 1 in camlock standard MAX AGGREGATE SIZE*** 1/8 in MAX PUMPING DISTANCE**** 100 ft 150 ft ✝ 1 bag = 3.0 cu ft yield * Patch Pump model recommended for use with products that pump more easily and a higher output is desired. Low-density fireproofing and self-leveling underlayments would be good choices. ** Spray Buddy model recommended for use with hard-to-pump products or extreme pumping distances or heights. It also utilizes AFS Auto Reverse system that reduces nozzle packs significantly with sandy and aggregated materials. EIFS and waterproofing coatings would fit this category. ***This is maximum aggregate size recommended for pump. Mix design will determine how well product will pump. ****Pumping distance may be increased or decreased significantly depending on mix design, but we believe these to be very achievable in most instances. Copyright 2018 Hy-Flex Corporation. All information contained within this document is based on the latest information available at the time of publication. ™ Hy-Flex reserves the right to make changes at any time without notice. SPRAY BUDDY APPLICATIONS • Low/Medium/High-Density Fireproofing • Cellular Concrete • Waterproofing • Bridge Repair • Plaster/Stucco Spraying • Self-Leveling Floor Underlayment • Injection Work • Slab Jacking • Manhole Restoration • Cementitious Coatings • Concrete Repair Mortar Under 1/8 inch Aggregate For parts, accessories or additional information, visit HyFlexcorp.com. PRODUCT OVERVIEW If you don’t believe the hype about the SPRAY BUDDY, try it out for yourself! This unit is available to rent from Hy-Flex. We offer monthly rates. Call 866-849-6246 for rates, recommendations and availability. Speeding Up The Industry One Pump At A Time 8774 S. St. Rd. 109 | Knightstown, IN 46148 | 866-849-6246 Toll-Free | 765-571-5167 Fax | HyFlexcorp.com ™ Look What Our SPRAY BUDDY Rugged. Efficient. BENEFITS Customers Say … MADE IN AMERICA FIELD SERVICEABLE • No daily maintenance other than cleaning All metal fabrication and engineering Fast, easy repair on the jobsite with “The Hy-Flex Spray Buddy simplified is done in our Indiana facility no special tools needed • Easy-access controls offer standard our waterproofing application toggle switches for easy field repair, and increased our profitability. unlike competitors’ expensive membrane HE AV Y DU T Y HIGHLY DEPENDABLE We went from applying concrete and touch panels Made from durable materials/Built Vertical drive contains no pump waterproofing by means of tough for years of reliable field use seals to maintain • Controls similar to those of the 30E Spray-Hoppers — which often LONG LIFE SPAN EASY TO CLEAN machine make it easier to train staff required a lot of ladder work — Double-life stator tube outlasts Unique tapered hopper design has flat on equipment to more robust, powerful spray Raymond J. Anger the competition sides for easy scrape down and near equipment. We also received follow- Texas Curb Cut zero waste on cleanout • Easy to understand and operate controls up calls to make sure we were Purchasing/IT Support satisfied with our purchase. I’d say • Operates on a 5k watt generator without question that the Hy-Flex Direct-drive, Control cover Auto-reversing technology maintenance-free gearbox • Only four field-replaceable wear Spray Buddy was money well spent, Variable speed drive with AFS controls components to keep the unit running and our guys thank us for it.” Hopper cover and screen • Operates on 15A 110V GFCI circuit for easy connection without nuisance trips Flat-sided hopper for easier scraping No replacement • Totally sealed control box keeps “The Spray Buddy has allowed us seals electronics safe from water and dust to be more efficient in tight spaces, • Very portable – easily fits into a short bed more productive in limited pickup truck logistics and more creative with patch jobs and repairs. Optional air • Large semi-pneumatic wheels offer This is an excellent tool for our John Ford compressor President improved mobility on the job site industry. It's extremely easy to use, Ford Drywall & Stucco, Inc. and I highly recommend it.” No tools needed for • Large inventory of parts! Orders placed removing stator by noon will be shipped out the same day Adjustable stator Tapered hopper for Semi-pneumatic wheels reduced cleanup waste Portable & Powerful. Period. Hopper screen with bucket rest Removable steel cover protects optional Simple, easy-to-use controls Clamp on and adjustable stator tube and closeable lid air compressor from damage design for fast cleaning and long life.
Load more

Recommended publications
  • Equipment and Caulking Installation Instructions Using Caulking Applicator Guns Photo 1A
    Equipment and Caulking Installation Instructions Using Caulking Applicator Guns Photo 1a There are different types of caulking applicator guns available. The recommended procedure when using the different styles will be described in Sections A, B and C. Section D will then describe the recommended procedures to follow to install the caulk and finish the job. Section A Applying Caulk in Plastic and Cardboard Fiber Foil Wrapped Cartridges Photo 2a There are a variety of applicator caulking guns available to do firestopping. We recommend using a smooth rod style rather than the less expensive ratchet rod type. When dispensing caulk from a 29 ounce-size cartridge, we recommend using the rod tape gun with at least a 12:1 thrust ratio. The higher thrust ratio means less hand fatigue since the firestopping caulks are usually high viscous materials. It will also help when the product becomes stiffer in the colder temperatures. (12:1 ratio generates approximately 300 pound thrust) Photo 3a For manual single component cartridge applicator guns. Select the correct size manual drive frame-style cartridge gun for either the 10-ounce (300ml) or the larger 29-ounce (850 ml) plastic or cardboard fiber foil wrapped tube type. (see photo #1a) Using a utility knife cut off the end of the plastic tip/nozzle of the sealant tube to the desired opening size. The cut can be straight across (90º) or angled Photo 4a (45º). Cutting too small of an opening will restrict the flow of material and a smaller bead size than needed may result. The smaller opening will also require more triggering action (pressure) to move the material out of the tube.(see photo #2a) Using a screwdriver or other pointed utensil insert it into the plastic nozzle to puncture the membrane and allow the caulk material to flow.
    [Show full text]
  • Fireproofing the Lungs Parts of the World, I Think, Should Be Watch- Ing Very Closely,” Says Wark, Particularly the Wildfire-Prone US West Coast
    COPD outlook DAVID GRAY/GETTY DAVID Firefighters battle the bush fires that devastated Australia in 2019 and 2020. leads to faster lung-function decline even in people with otherwise healthy lungs. “Other Fireproofing the lungs parts of the world, I think, should be watch- ing very closely,” says Wark, particularly the wildfire-prone US west coast. People with conditions such as COPD are vulnerable “I find it rather unsettling that there are all these unknown things,” says Guy Marks, to wildfire pollution, but there is little advice on how a respiratory and environmental epidemiol- to keep safe. By Anna Nowogrodzki ogist at the University of New South Wales, Sydney. “The scale of the fire that we’ve just had is unprecedented. It represents to me a few days into the new year, an older prednisone on hand to ease her symptoms. clear turning point in our experience of the person came into John Hunter But still, she found breathing more and more consequences of climate change.” Hospital in Newcastle, Australia, difficult. wheezing and short of breath. Res- COPD is a common condition — it is the third Vulnerable lungs piratory physician Peter Wark was leading global cause of death. And people with Wark’s patient improved just by being in the Aon call at the time. He wasn’t surprised to respiratory conditions such as COPD are some air-conditioned hospital. “We really didn’t do see someone with respiratory problems — of the most vulnerable to particulate matter anything else,” he says. She was one of three or Australia was enduring an unprecedented and from air pollution and wildfires.
    [Show full text]
  • TSB-A-07(1)S:2/07:Countryside Stove & Chimney of Burnt Hills,Petition No
    New York State Department of Taxation and Finance Office of Tax Policy Analysis TSB-A-07(1)S Sales Tax Technical Services Division February 8, 2007 STATE OF NEW YORK COMMISSIONER OF TAXATION AND FINANCE ADVISORY OPINION PETITION NO. S040628D On June 28, 2004, the Department of Taxation and Finance received a Petition for Advisory Opinion from Countryside Stove and Chimney of Burnt Hills, 839 Saratoga Road, Burnt Hills, New York 12027. The issues raised by Petitioner, Countryside Stove and Chimney of Burnt Hills, are: 1. Whether installations of various wood, pellet, and gas burning heating appliances qualify as capital improvements to real property for New York State and local sales and use tax purposes. 2. Whether the installation of manufactured stone veneers on an interior or exterior wall qualifies as a capital improvement to real property for New York State and local sales and use tax purposes. Petitioner submits the following facts as the basis for this Advisory Opinion. Petitioner is a retail store selling and installing gas, wood, and pellet burning stoves that are placed on the floor on noncombustible material either purchased or provided by the customer. The gas stoves can be either directly vented from the stove out the side of the building using a wall thimble and a cap on the outside of the building or vented into the customer’s existing chimney by installing a stainless steel flexible liner in the chimney with its own rain cap. The wood and pellet burning stoves are also vented straight out the back of the stove and through a wall or chimney.
    [Show full text]
  • The Future Is Now Kitchen Exhaust Technology Advances Follow Design Innovation
    OCTOBER/NOVEMBER 2007 xhaust e itchen K The Future Is Now Kitchen exhaust technology advances follow design innovation. By Joel Berkowitz Partner/Vice President, Fireproofing Corporation of America of income and is a real attraction to • Precipitator cells that produce an companies that would want to lease electrified field that ionizes grease office space and individuals seeking particles and bonds them to a filter high-rise dwellings. cell. The problem has always been the kitchen exhaust ductwork and vents. • Water wash canopies that automati- Kitchen exhaust systems, with their cally rinse grease from the interior insulated risers coming up through portions of an exhaust system every the building, occupy valuable square night. footage on every floor of the prop- erty, taking up thousands of dollars in These aren’t glimpses of the future otherwise rentable space every year. — it is technology available now. The new technology for kitchen Landlords and restaurateurs alike Left to right: Partners Glenn exhaust systems is a boon to prop- can take advantage of these systems, Catalano, author Joel Berkowitz and erty owners and managers. No lon- and build more creative kitchens Anthony Scotto. ger is there a need to place ugly in more locations than ever before. black exhaust risers up the side of the They are high-tech and cutting-edge ntil recent times, build- building. And forget relying on hot- and have the ability to revolutionize ing design and engineering dog carts outside on the sidewalk — the industry. technology placed limits on U today’s technology allows for street- Many of these technologies have where commercial kitchens could be level kitchens in multi-story build- been around for 10, 20, even 30 years located within a facility.
    [Show full text]
  • Firestopping Application Guide
    Firestopping Application Guide www.grabberman.com VERSION 4.0 NOTES Table of Contents Page Table of Contents Table Table of Contents .........................................................................................................................................................................................i General Certificate of Conformance ...............................................................................................................................................................iii LEEDS Information United States LEEDs .....................................................................................................................................................................v Canadian LEEDs .........................................................................................................................................................................vii Product Data Sheets GrabberGard EFC .........................................................................................................................................................................ix GrabberGard IFC ........................................................................................................................................................................ xiii GrabberGard EFS .......................................................................................................................................................................xvii Material Data Sheets GrabberGard EFC ........................................................................................................................................................................xxi
    [Show full text]
  • Factory-Welded Grease Duct Systems 3
    1 XXX XXX FACTORY-WELDED GREASE DUCT SYSTEMS 3 General Information Product Overview GeneralXXX Notification Grease duct is an ETL listed, single wall construction The purpose of the NFPA 96 Standard is to reduce the potential fire hazard of cooking operations, independent made from 430 stainless steel. Duct diameters range from of the type of cooking equipment used and whether used in public or private facilities. Please refer to Chapter 7 8” to 24”, with multiple lengths and accessories available. of the NFPA 96 Standard, Exhaust Duct Systems, for Grease duct is ideal for use in kitchen ventilation applica- detailed description of duct requirements and design. tions and is available as a stand-alone system or part of All dimensions are shown in American Standard (feet and inches). a fully integrated package. Grease duct is pre-engineered for optimum performance for exhaust fans and hoods. Grease duct is ETL listed to Standard UL-1978; duct does not have to be welded in the field. Table of Contents 4 5 Table of Contents Standards & Key Words* & References 01 General Information 10 Grease Duct Components UL- 1978 Test Standard for Safety Grease Ducts. -Product Overview -Factory Installed Riser -General Notification 11 -Field Installed Riser NFPA- 96 Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations. 12 -Straight Duct 02 Table of Contents 13 -Adjustable Straight Duct ETL- Edison Testing Laboratory, http://www.intertek-etlsemko.com. The ETL listed Mark is the legal equivalent of the UL Listed and 14 -Table 9- Dynamic Loss Coefficient Table CSA Listed Marks throughout the United States and Canada.
    [Show full text]
  • Assembly and User Instructions Fireplace Insert, Lotus H370 Petite
    Assembly and User Instructions Fireplace Insert, Lotus H370 Petite Version 3, 04/10-2017 Introduction Congratulations on your new Lotus Fireplace Insert We hope and believe that it will give you many warm hours. But before you may truly benefit from your investment, you should read this guide thoroughly. It provides some specific advice as to how you will benefit the most from your fireplace insert – now, as well as in the years to come. This is why this guide would be worth while keeping, like all other directions for use. Lotus may look back on a long tradition, making our first productions back in 1979. Our production is now running in Langeskov, and exported to many European markets. Lotus products are made to a fine Danish tradition, serving its owners faithfully for years. So, once again congratulations on your new Lotus fireplace insert – making for a warm and cosy beginning of an all new home life for you. Fireplace Insert Assembly Before your new fireplace insert will be ready to exude warmth and a cosy atmosphere, you should read these lines thoroughly, reviewing the requirements for the assembly and the environment. Also, reference is made to all local regulations, including those referring to national and European standards, to be met in the installation of your fireplace insert. The hole size required for assembly appears from the leaflet material as well as the line drawings on the last page of these instructions. A: Holes used for fastening the insert to the base. B: Set screws for adjustment of the insert in relation to the base.
    [Show full text]
  • Trafalgar Fyrewrap
    ® FYREWRAP Lightweight Fireproofing for Ducts The Trafalgar fire stopping range includes: Sealant | Pillows | Mortar | FR Batts FR Collars | FR Access Panels | Pipe Wraps FyreWrap Duct Wrap | FR Downlight Covers Intumescent Dampers | Fire Door Hardware Fire Rated Board and Systems | Cable Coating FYREBOX for multiple and mixed services fyrewrap.com.au V1.0419 Product FYREWRAP Lightweight Fireproofing for Ducts Overview Unifrax and Trafalgar have partnered in Australia to bring you FyreWrap® duct fireproofing systems. Simply put, this is the only way to go when it comes to providing passive fire protection for ductwork in commercial buildings. FyreWrap comes ready to use as a foil finished roll to wrap around the ductwork of all configurations. It eliminates the need for messy spray applied materials, which are known to require hours of masking to avoid resulting overspray. FyreWrap results in fast, simple, cost effective and clean fireproofing while providing pleasing aesthetics. FyreWrap is beneficial for project work and planning, as it allows for other trades to be working in close vicinity to the contractors doing the duct wrapping and with careful planning, large quantities of the duct fireproofing can be completed off-site. This is a revolution in duct fireproofing so insist on FyreWrap lightweight fireproofing for your next project. Fast | Clean | Easy fyrewrap.com.au 1800 888 714 Page 2 of 5 Product FYREWRAP Lightweight Fireproofing for Ducts Overview APPLICATION: FyreWrap is used to provide 2 and 3 hour protection for fire rated ductwork in commercial buildings where fire rating and FRL requirements are necessary. FyreWrap can be pre-wrapped around ducts before they are installed, or retrofitted over existing ductwork.
    [Show full text]
  • Duct Wrap 2X2 Duct Wrap 2X2+
    Thermal Ceramics Thermal Ceramics Duct Wrap 2x2 Duct Wrap 2x2 or Duct Wrap 2x2+ Duct Wrap 2x2 or Duct Wrap 2x2+ Typical Insulation Pin Layout Through Penetration System 1 or 2 Hour Grease Duct Duct Wrap 2x2+ For Duct Spans > 24" Wide To Prevent Blanket Sag Commercial Kitchen Grease Duct Fire Protection Systems Product Data & Installation Guide NFPA 96 IMC 1. Product Description Thermal Ceramics Duct Wrap 2x2 and Duct Wrap 2x2+ are foil- encapsulated, non-combustible, inorganic, flexible fireproofing wraps specifically tested and designed to provide a 1 or 2 hour fire rated enclosure for commercial kitchen grease ducts in compliance with AC 101 (ASTM E2336) grease duct test standard. Duct Wrap 2x2 or 3. Physical Characteristics Duct Wrap 2x2+ is in compliance with the: Duct FireMaster Unit Size Units/ Wt./ • Uniform Mechanical Code Fire Protection Ctn. Ctn. • International Mechanical Code Product • Uniform Building Code Duct Wrap 2x2 Roll 2" x 24" x 20' 1 52 lbs. for zero clearance to combustibles and shaft alternative. The differ- (50 mm x 610 mm x 6 m) (24 kg) Installation Pin Layout Figure 2 Drawing # FMDW2004-0 Duct Wrap 2x2+ ence between the two wrap systems is the core material basic Duct Wrap 2x2 Roll 2" x 48" x 20' 1 103 lbs. 1 Vertical section chemistries. Duct Wrap 2x2 is a high temperature ceramic fiber Duct Wrap 2x2+ (50 mm x 1.2 m x 6 m) (47 kg) 2 Access door insulating blanket composed of primarily alumina and silica and Duct Wrap 2x2+ is a low biopersistence alkaline-earth silicate wool.
    [Show full text]
  • Fireproofing Structural Steel
    5^ NATIONAL BUREAU OF STANDARDS REPORT 5821 FIREPROOFING STRUCTURAL STEEL 'by Eo Mo Bender <NB§> U. S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS THE NATIONAL BUREAU OF STANDARDS Functions and Activities The functions of the National Bureau of Standards are set forth in the Act of Congress, March 3, 1901, as amended by Congress in Public Law 619, 1950. These include the development and maintenance of the national standards of measurement and the provision of means and methods for making measurements consistent with these standards; the determination of physical constants and properties of materials; the development of methods and instruments for testing materials, devices, and structures; advisory services to Government Agencies on scientific and technical problems; invention and development of devices to serve special needs of the Government; and the development of standard practices, codes, and specifications. The work includes basic and applied research, development, engineering, instrumentation, testing, evaluation, calibration services, and various considtation and information services. A major portion of the Bureau’s work is performed for other Government Agencies, particular!) the Department of Defense and the Atomic Energy Commission. The scope of activities is suggested by the listing of divisions and sections on the inside of the back cover. Reports and Publications The results of the Bureau’s work take the form of either actual equipment and devices or published pajrers and reports. Reports are issued to the sponsoring agency of a particular project or program. Published paj>ers appear either in the Bureau’s own series of publications or in the journals of professional and scientific societies.
    [Show full text]
  • RETRO-GUARD® RG Replacement Fireproofing Designed to Meet All
    FIREPROOFING PRODUCTS ® RETRO-GUARD RG Designed to meet all IBC Replacement Bond Strength Requirements fireproofing Product Description c. Lock down agents shall be UL Classified for use with ® Retro-Guard RG. Refer to the ULI Fire Resistance Directory Retro-Guard RG replacement fireproofing is a single current edition for products listed with Retro-Guard under component, mill-mixed gypsum plaster based product which Classification Category CBUI. requires only the addition of water on the job site to form a consistent, pumpable slurry. RG can be used on structural steel Delivery & Storage columns, beams, joists, trusses, flat plate cellular and fluted a. All material to be used for fireproofing shall be delivered decking. in original unopened packages bearing the name of the Features & Benefits manufacturer, the brand and the proper Underwriters Laboratories Inc. identification. Retro-Guard Cementitious Fireproofing has been specifically developed by GCP Applied Technologies to meet the needs of Mixing the fireproofing respray contractor. Retro-Guard offers the a. Retro-Guard shall be mixed by machine in a conventional following advantages: plaster type mixer or a continuous mixer specifically modified • Adjustable Bond Strengths - can be applied to reach over for cementitious fireproofing. The mixer shall be kept clean 1,000 psf when applied at densities at or above 18 pcf. and free of all previously mixed material. The mixer speed in a • Quick set—in 7 to 10 minutes with the use of Monokote® conventional mixer shall be adjusted to the lowest speed which Accelerator and Injection System gives adequate blending of the material and a mixer density of 3 • Less overspray—work close to steel, less cleanup 40–45 pcf (640–720 kg/m ) of material.
    [Show full text]
  • Fire Prevention Dampers and System Solutions in Accordance with DIN 18017-3
    Fire Prevention Dampers and system solutions in accordance with DIN 18017-3 Part II – 01/2006 »System solutions« »Dampers« »D.A.S.« »WBV« »WBE« »WBZ« Contents Page Contents illustrated in photos 1 Differences between K90-18017-3 and K90-4102-6 2 – 4 K90-187017 damper as a fireproofing element with a hermetically enclosed release mechanism WBE-W-K90-18017/Z-41.3-619/Installation into shaft walls or system-tested walls 5 – 15 WBE-D-K90-18017/Z-41.3-619/Installatin into floors K90-187017 damper as a fireproofing element with a hermetically enclosed release mechanism WBV-K90-18017/Z-41.3-561 (exhaust air) 16 – 24 WBZ-K90-18017/Z-41.3-572 (supply air) K90-18017 damper as a fireproofing element BSE-W-K90-18017/Z-41.3-332/Installtion into shaft walls or system-tested walls 25 – 29 BSE-D-K90-18017/Z-41.3-332/Installtion into floors K90-18017 damper as a fire disk valve BSV-K90-18017/Z-41.3-606/Exhaust air 30 – 34 BZV-K90-18017/Z-41.3-343/Supply air K90-18017-S system solutions for the prevention of a spread of fire from floor to floor HS 1-1 S 25/Z-41.6-626 calcium-silicate shaft system 35 – 42 in combination with Strulik dampers D.A.S./Z-41.6-565 – D.A.S. 200/Z-41.6-597 – D.A.S. I/Z-41.6-598 sheet-metal shaft system 43 - 57 in combination with Strulik dampers Subject to change without notice. D-65597 Hünfelden, Neesbacher Str.
    [Show full text]