Sponsors, Committees and Preface Effect of Surfactants on the Dispersion of Multi-Walled Carbon Nanotubes in Epoxy Resin Y. An, X.T. He, W.M. Yang and Y.M. Ding 1 Research on Bonding of PMMA Microfluidic Chip with Precisely Controlled Bonding Pressure B.Y. Jiang, Z. Zhou and Y. Liu 8 Pseudo-Plastic Behavior of a Film Foam Flow with Carbon Dioxide as the Internal Gas Phase D.X. Du, Y.G. Li and S.J. Sun 15 A Mechanical Model for TRIP Sheet Steel Forming T.K. Shan and L. Liu 21 Mechanical and Interfacial Properties of Hydrolyzed Kevlar Fiber Reinforced Wood Flour/HDPE Composites R.X. Ou, Q.W. Wang, F.P. Yuan, B.Y. Liu and W.J. Yang 27 Modification of Poly(vinylidene Fluoride) by Grafting of Functional Monomer 3- (Trimethoxysilyl)propyl Methacrylate L.N. Liu, Y.B. Chen and Y.F. Zhang 32 Preparation and Characterization of PES/SPSF Blend Ultrafiltration Membrane F. Ma, Y.Z. Zhang, X.L. Ding, L.G. Lin and H. Li 37 Influence of Transesterification on the Properties of PET/MAPE Blends Prepared by Reactive Extrusion L. Gong, Q.W. Wang, Y.M. Song, H.G. Wang, S.J. Sui and Y.Z. Cui 43 A Study on the Properties of Polypyrrole Coated Polyester Fiber J.Y. Xu and X. Jin 48 Influence of Draw Ratio on Crystal Morphology and Structure of β-Form of Isotactic Polypropylene B. Zhang, J.B. Chen, B.W. Qiu, F.F. Ji and C.Y. Shen 54 Physical Properties of Waste Lignin/HDPE Composites T. Liu, Q.W. Wang and H. Zhao 60 Preparation and Properties of High Performance Polyimide Foam K.L. Qi, G.C. Zhang, S.M. Li, L.W. Liu and Z. He 66 Impacts of Acid Treatment on the Characteristics of Native Corn Starch Granules X. Jin, S.Q. Hou, X.X. Sha and L. Yu 72 Eicosane/Polycarbonate Composite as Form-Stable Phase Change Materials for Latent Heat Thermal Energy Storage Y. Wang, T.D. Xia and H.X. Feng 78 Structure and Thermal Properties of Cellulose Diacetate-Graft-Poly(lactic Acid) Copolymer W.J. Deng, X.P. Zhuang, K.T. Guan and B.W. Cheng 85 Hydrophobic Modification of Natural Cellulose Fiber with MMA via Surface-Initiated ARGET ATRP G. Li, H.P. Yu and Y.X. Liu 90 Removal of Cesium from Aqueous Solutions Using Crosslinked Amphoteric Starch Prepared by Microwave Treatment L.X. Zou, Q.C. Liu and J.H. Rong 95 Synthesis of Carbon Nanotubes with Typical Structure from the Pyrolysis Flame Y.C. Liu, N.N. Zheng, J.D. Huang and B.M. Sun 99 Study on the Parametric Optimal Design of a Different-Speed Mixer Z.M. Fan, W.F. Hu, D.H. Choi and J. Xu 104 Experimental Study of Melt Electrospinning in Parallel Electrical Field M.F. Hao, Y. Liu, X.T. He, P.C. Xie and W.M. Yang 111 Influence of Hydrogen Dilution on Electrical Properties of Amorphous Silicon Thin Films Deposited on Glass Substrates Y.G. Li and D.X. Du 117 Study on the Surface Treatment of Special Screw for Light Guiding Plate’s Precision Injection Molding G. Gou, P.C. Xie, Z.X. Wen, Y.M. Ding and W.M. Yang 123 Factors Influencing Diameter of Polypropylene Fiber in Melt Electrospinning M.F. Hao, Y. Liu, X.T. He, Y.M. Ding and W.M. Yang 129 Study on the Synthesis and Properties of EP/PU Composite X.Q. Wang, Z.X. Huang, J.L. Zheng and Q.L. Mei 135 A New Process for Manufacturing Straw Particleboard by Impregnating and Enzyme Treatment C. Qi, W.H. Wang and W.J. Li 140 Effect of Spinning Conditions on the Morphology of Polyacrylonitrile Hollow Fiber Membranes X.G. Zhang, J. Li and Z.L. Miao 146 Springback Prediction of the TRIP Sheet Steel Stamping T.K. Shan and L. Liu 152 Simulation of Non-Isothermal Crystallization under Varying Cooling Rates for Polymer Melts B.W. Qiu, J.B. Chen, B. Zhang and C.Y. Shen 159 Finite Element Analysis of Performance for Radial Tires, Part I: Model, Material Constants Y. Liu, X.T. He, H. Yan, C.F. Guan and W.M. Yang 165 Finite Element Analysis of Performance for Radial Tires, Part II: Simulation Results Y. Liu, Y. An, Y.M. Ding, P.C. Xie and W.M. Yang 170 Experimental Research on Mechanical Adaptability Properties of Tri-Axis Differential- Drive In-Pipe Robot L.X. Sun, Q.J. Zhang, S.Y. Jiang, X.D. Jiang and Y. Wang 175 Analysis of Ring-Opening Reaction between Bisphenol A and Epichlorohydrin by the Method of Quantum Chemical Calculating J. Li, X.Z. Yu and K. Zhang 180 Swelling Characterization of Double Sensitive Hydroxypropylcellulose / Sodium Alginate Hydrogel G.L. Gong, H. Li and Z.H. Guo 184 Electronic Transport Properties of Hydrogenated Amorphous Silicon Thin Films Deposited on Plastic Substrates Y.G. Li and D.X. Du 189 Experimental Study on Pseudo-Plastic Behavior for Film Foam Flow in a Vertical Tube D.X. Du, Y.G. Li and S.J. Sun 194 Preparation and Mechanical Properties of Rubber/Organoclay Nanocomposites G.Y. Lin, B.F. Gao and C.S. Wang 200 Prediction of Forming Limit of Sheet Metal Based on Stören-Rice Model W.G. Guo, J.M. Chen, H.M. Li and L.D. Shao 205 Biodegradable Poly(lactic Acid)/TDI-Montmorillonite Nanocomposites: Preparation and Characterization N.L. Chen, H.X. Feng, J.W. Guo, H.M. Luo and J.H. Qiu 211 Preparation of Polyethersulfone Ultrafiltration Tubular Membranes with Superior Properties J. Liu and E.H. Liu 216 Research on the Curing Behaviour and Morphology of an Epoxy/OMMT Nanocomposite System G.Y. Lin, D.W. Qu and C.S. Wang 221 Study on the Dense Phase Pneumatic Conveying Property of Carbon Black Z.H. Li, J.F. Liu, L. Jiao and L. Guo 228 Influence Analysis of Sampling Time for Synthesis of Carbon Nanotubes in the V-Type Pyrolysis Flame Y.C. Liu, B.M. Sun and Z.Y. Ding 235 Deformation Analysis of Polyurethane Screen Deck in Linear Vibrating Screen Z.R. Zhang and Y.Y. Wang 240 The Mould Design of the Car’s Oil Strainer Based on Pro/E Y.L. Zhang, L.F. Wu and K. Zhang 247 b Advanced Polymer Science and Engineering

The Mold Flow Analysis of the Car that Based on Pro/E Y.L. Zhang and K. Zhang 253 Sealing-Spinning Technology for Thin-Walled Aluminum Alloy Tubes L.X. Sun, J.B. Jia, Y. Xu and S.Y. Jiang 259 Process Analysis and Numerical Simulation of UHMW-PE Pipe Gas-Assisted Precision Molding F.H. Tong and J.H. Qin 264 N-Lamina Model of Extrusion Pressure of Non-Plug Flow Solid Conveying in Feeding Section by Single-Screw Extrusion Molding C.H. Liu, J.H. Qin and D.L. Shi 271 Study on the Preparation and Properties of Thermoplastic Tapioca Starch / Magnesium Hydroxide Composites X.Z. Mo, Y.X. Zhong, X. Qi and C. Mo 278 A Statistical Method to Determine the Volume Fractions of Inclusions in Polymer Composites X.L. Li, X.J. Li, J.W. Zhang, Y.H. Qie, X.Y. Li and B. Liu 283 Molecular Interdiffusion of Hauling Theory between Dissimilar Polymers Based on Novel USW G.H. Zhang, J.H. Qiu, L. Shao and X. Fu 289 Portable Benzo[a]pyrene Immunosensor Based on the Polyanline Nanofiber Modified Screen-Printed Electrode C.P. Wang, J.D. Zhou, Y.B. Huang, G.Q. Liang, Y.J. Liu and H.T. Lei 295 Preparation and Characterization of Conductive Polyaniline/Zirconia Nanoparticles Composites H. Huang, Z.C. Guo, W. Zhu and F.C. Li 302 Preparation of Antibacterial Cotton Fabric Containing Patchouli Oil Microcapsules by Chemical Crosslinking Method Z.M. Yang, G.Q. Liang, L. Li, W.M. Au, H.Y. Zhong, T.K.S. Wong and Z.H. Yang 308 Preparation and Characterization of Polyacrylonitrile-Metal-O-MMT Nanocomposites H.X. Feng, G.W. Fu, Y. Wang, N.L. Chen and R.C. Yang 316 Study on the Effect of Thermal Design of Plane Mould on the Mechanical Properties of Epoxy Sheet Molding Compounds J. Li, Z.X. Huang and D.L. Jin 321 Liquid-State Synthesis and Properties of Fluorescent Conducting Polymers: α, βi- SiW11GaIII/Polyaniline W.L. Yang, R.J. Lv and R.H. Ma 326 End-Point Control of Holding Phase Based on Cavity Pressure for Injection Molding J. Wang, P.C. Xie and W.M. Yang 333 Preparation and Characterization of PVDF Hydrophobic Membrane H.F. Zhang, Y.Z. Zhang, L.G. Lin, X.L. Ding and H. Li 338 Development of a Two-Dimensional Force Model and Data Analysis for the Tire Uniformity Testing Machine B.L. Hang and Z.Y. Duan 343 Effects of Rotor Speed on Manufacturing Process of Short Fiber-Rubber Composite Material D.W. Zhang, C.S. Wang and G.Y. Lin 350 Study of the Heat Storage Device Characteristic in the Solar Chimney Power Plant System with Vertical Collector Y. Zhou, W.J. Zheng, X.H. Liu and Q.L. Li 356 Experimental Research and Performance Testing of Fe-Based Composite Plating P. Fu, C. Zhao and H. Tian 364 Experimental Study of Screw Speed Effects on Quality of Short Fiber-Rubber Composite Material C.S. Wang, D.W. Zhang, H.G. Bian, X.B. Wang and L. Guo 369 Experimental Study on Thermal Conductivity Property of Rubber Composites Filled with Carbon Nanotubes Z.P. Wang and Y. He 373 Study on Foaming Effect of the Biodegradable Buffer Material X.K. Zeng, G.Z. Meng and C.S. Wang 377 Advanced Materials Research Vol. 221 c

Thermal Conductivity of Composite Silicone Rubber Filled with Graphite / Silicone Carbide Y. He, X.S. Wu and Z.C. Chen 382 Research on Crafts of Ni-P-SiC Electroless Composite Plating on Surface Performances of the Mould J.Y. Hou, C.S. Wang and Y. Bai 389 Screw Conveyor Design and Processing in Rubber Production P. Fu, S.H. Li and C.S. Wang 394 Nonlinear Finite Element Analysis of the Bending of Shape Memory Alloy Hybrid Epoxy Beams S.S. Sun, X.C. Jiang and G.J. Sun 399 Effect of Transformation on Springback for TRIP Steel Stamping L. Liu and T.K. Shan 405 Distributive Mixing Performance and Mixing Efficiency of Discs in a Series Disc-Screw Extruder J. Yang and B. Jiang 411 Study on Low Profile SMC for the Production of Cylinder Head Cover M. Yang, Y.J. Nie, X.F. Zhu and R.F. Ming 418 The Cooling Time of Gas Assisted Injection Molding Q.X. Bu, X. Zhang, H.Y. Chen and Q.Z. Yin 422 The Dynamics Analysis of Rolling Movable Teeth Reducer J.F. Wu, X.C. Zhu, W. Gao and Y. Yu 429 The Kinetic Parameter Calculations of the Shift Pairs about the Tripod Universal Joint L. Li 436 Control of Residual Vibration in Micro-Positioning Platform H.W. Ji and X.P. Hu 444 Design and Characterization of a Flexible Micro-Displacement Manipulator H.W. Ji and X.P. Hu 449 Study on Properties of Polyester Short Fiber-NR Composites C.S. Wang, M.L. Hou, L. Li and H.G. Bian 455 CAE Optimization of Hot Runner Sequential Injection Molding for Car Interior Trim Panels L.L. Yang, H.M. Zhang and M. Li 460 Study on Thermal Conductivity of Composites of Rubber/CB with Good Electrical Properties J.P. Song, Y. He and L.X. Ma 466 Instantaneous Dynamic Analysis of the New Stirring Kneader Shaft Z.M. Fan, G.T. Zhou and J.P. Liu 472 Optimal Design for Roller Motion Track of Tire Building Machine Z.M. Meng, Y.B. Qiao and C. Ren 478 Experimental Study on the Blending of EPDM/R-EPDM C.S. Wang, H.H. Su and G.Z. Meng 484 Experimental Research on Seal Ring in the Pipeline Mixed with r-EPDM X.K. Zeng, H.H. Su and C.S. Wang 490 Three-Dimensional Temperature Field of Mixer Chamber Analysis H.G. Bian, C.S. Wang, R.Q. Wang, Z.Z. Wang and J.L. Zhang 495

Process of Supercritical CO2 Extraction and Improved Design of Extraction Equipment J.Z. Guo, P. Zhao and W.Q. Wang 505 The Study of Electroless Ni-P Coating on Aluminum Tyre Mold J.Z. Guo and B. Xu 511 The Effects of Interbedded Friction on Load Capacity of Rhombic Wire Wound Vessel J.F. Wu, W. Gao and X.C. Zhu 517 Optimization of Packing Pressure Curve in Injection Molding Based on Numerical Simulation H.M. Zhang, M. Li and L.L. Yang 522 Study on the Influence of Initial Temperature of Tire on Curing Temperature Field and Cure State Q.L. Li, L.C. Fan, T. Li and H.L. Chen 528 d Advanced Polymer Science and Engineering

Determination of Thermo-Physical Properties of Rubber and its Effect on Curing Temperature Field of Tire Q.L. Li, L.C. Fan and T. Li 533 Effect of Helium on Synthesis of Carbon Nanotubes from the V-Type Pyrolysis Flame Y.C. Liu, B.M. Sun and Z.Y. Ding 540 Effect of Hydrogen on V-Type Pyrolysis Flame Synthesis of Carbon Nanotubes Y.C. Liu, B.M. Sun and Z.Y. Ding 545 Research of Polymerization Reactor Fault Diagnosis Based on Acoustic Emission Y.H. Huang, J.L. Wang, H.Q. Jiang, X.M. Jia, H.L. Chong, M. Hu and W. Yang 550 5m Drum’s FEA and Optimum Design Based on SolidWorks Simulation Q.X. Bu 555 Study on One-Step Injection Moulding Technology of Screw Drill Stator Bushing D.M. Jiao and B.Y. Lv 562 Application Analysis of Radial Tire Mould Assembly Process Z.K. Tian, Z.H. Zhang, H.M. Hu and X.B. Li 566 The Study of Fuzzy/PID Compound Control Algorithms in Rubber Sulfuration Process Based on Sugeno Rules C.T. Zhang and Z.Z. Yu 571 Experimental Research on the Hot Knife’s Temperature in Radial Tire Building Machine Y. Tang and Y.P. Dai 577 The Study of the Extruder Screw for the Rubber and Plastics Blend G.Z. Wang 582 Experimental Investigation of the Thermoplastic Tapioca Starch/Sisal Fiber Composites X.Z. Mo, Y.X. Zhong, J.Y. Pang, T. Guo and X. Qi 586 Fluid-Solid Coupling Analysis on the 2-Dimentional Flow Field of Internal Mixer H.X. Zhao and H.G. Bian 592 Thermal Conductivity of Solid Argon Nano-Films from Molecular Dynamics Simulations L.X. Ma, Y.Z. Tang and Y. He 598 Numerical Analysis on Temperature Field in a LED Module D.X. Du, Y.G. Li and X.B. Luo 604 Research of Soccer Robot Target Tracking Algorithm Based on Improved CAMShift Y.H. Huang, J.L. Wang and X.M. Jia 610 The Effect of the Rotor’s Shape for the Mixing about the Mixing-Extruding Machine L. Li, Y. Wang and C.S. Wang 615 Numerical Model of Melt-Through in a Fully Penetrated GTA Weld Pool P.C. Zhao and S.J. Li 622 Study on the Applied Research of a Different-Speed Mixer Z.M. Fan, H.M. Li and G.T. Zhou 629 Fixed Bed Column Studies for the Sorption of 2,4,6-Trinitrotoluene on the Aminated Lignin J.P. Zhang, X.Y. Lin, X.G. Luo and C. Zhang 635 Preparation and Characterization of Spherical Lignin/Polylactide Composite Adsorbent H. Zhu, X.Y. Lin, X.R. Zhuo, X.G. Luo and C. Zhang 640 Graft Copolymerization of Soybean Protein Isolated and Methyl Acrylate as a New Thermoplastic Material Y. Lu, X.G. Luo, X.Y. Lin and C. Zhang 644 Numerical Simulation of Shrinkage in the Microinjection Molding of Multi-Microparts Produced in one Mold J. Wang and W.M. Yang 649 PLA Nanofibers Electrospun from System of Low Toxicity Solvent L.W. Liu, W.M. Kang, B.W. Cheng and Y. Liu 657

Preparation of Pd Membrane Supported on Al2O3 Nanofiber Nonwoven Used in Hydrogen Separation J. Shi, D. Jia, B.W. Cheng, W.M. Kang and X. Bai 662 Single Screw Extruder Characteristics on Friction and Heat Generated with the Barrel Carved Spiral Groove F.H. Tong, D.L. Shi and J.H. Qin 668 Experimental Study on Surface Damage in Forming of Galvanized Steel Sheets Y.K. Hou 674 Advanced Materials Research Vol. 221 e

Research Progress and Application of Multi-Point Forming H.M. Li and W.G. Guo 679 Development of Carton Black’s Dispersion Evaluation System Based on Statistics X.B. Wang, C.S. Wang and D.W. Zhang 684 A Preparation Method for Inner Liner of Non-Butyl Rubber Composites W.M. Yang, C.J. Li and S.J. Li 689 Study on Mechanism of Strengthened Vortex Diffusion for a Punched Agitator J.G. Chen, D.Y. Luan and X.C. Zhu 694 Studies on the Influencing Factors of Biodegradable Buffer Material C.S. Wang, G.Z. Meng and H.H. Su 701 FEM Analysis of Mixer Rotors of the Waste Rubber Reclaimed L. Guo, L. Wang and C.S. Wang 706 Composite Pressure Vessel Stress Analysis and Failure Research X.L. Luo and L.L. Liu 713

Table of Contents