sign in sign up
<<
Home , Color

Cable Extension Options Specifications HIGH RESOLUTION Extend the cable run for your camera up to 300ft or more depending on the cable type used. See table below: 1/4” Advanced Color INDOOR/OUTDOOR Option Cable Type Max. Cable Max. # of Video Format / NTSC: 656(H) x 492 (V) Run Distance Extensions Horizontal Resolution 480 TVL 1 Regular BNC 180ft / 55m 3 COLOR CAMERA (supplied with camera) Sync. & Scan. Systems Internal; 2:1 Interlace with Night Vision 2 'RG59' or 'Coax' 300ft / 92m 5 or ' Coaxial' S/N Ratio > 48dB BNC (sold sepa- rately) & Speed AES; 1/60 ~ 1/50,000 sec. MODEL: CVC6950 SERIES 3 Lorex Universal 300ft / 92m 3 Cable Minimum Illumination 0.6 LUX @ F1.2 (IR off) (sold separately) 0 LUX (IR LEDs on) Notes: 1. For optimal , consider using option 2 or 3. Preference for using Video Output Comp. 1.0 Vpp @ 75ohm the same cable type for the entire distance.

2. Cable run recommendation based on typical camera power consumption (up Lens / Lens Mount 5.1 mm F2.8/ Fixed to 500mA). For specialty with higher current consumption, maximum cable run may be reduced. Consider providing power to the camera FOV (diagonal) at the camera side rather then at the end of the extension cable. 50 Degrees

3. Indicators that your cable run may be too long: Termination Video: BNC Female • Video is permanently & (even during day time) • Video is distorted Power: Barrel Female Troubleshooting IR / Night Vision Range 18 IR LEDs/850nm/50’ (15m)

Problem Solution Power Requirement 12V DC ±10% Power Consumption 250 mA or 3W max No Picture/Signal • Ensure your TV is on the correct input . Common terms of an input channel: INPUT, AV CHANNEL, LINE1, LINE2, AUX. Operating Temp. 14°F ~ 122°F • If your camera is connected to a VCR/DVR, (-10°C ~ 50°C) ensure it is properly connected to your TV/ Monitor. • Ensure connections are properly connected. Weight (with stand) 0.6 lbs. / 0.26 kg • Ensure all the camera power supply is plugged in. Dimensions 2.6" x 4.2" x 5.2" LxWxH 66 mm x 107 mm x 132 mm Picture is too bright • Ensure your camera isn’t pointed directly at a source of (e.g sun or spot light). (with sunshade) • Slide the sunshade (bullet cameras only) forward to block excess light. 2.6"/ 66mm • Move your camera to a different location. 4.2"/107mm

Picture is too dark • If using during the day, the camera may not be getting enough light. Slide the sunshade backwards to let in more light. Check the 5.2"/ and settings of the device 132mm your camera connects to (TV/Monitor/DVR).

Night Vision is not • The night vision activates when light levels working drop. The area may have too much light. IT’S ALL ON THE WEB! Picture is not clear • Check the for dirt, dust, www.lorextechnology.com spiderwebs. Clean the lens with a soft, clean QUICK START GUIDE cloth. Product Information Specification Sheets • Make sure that the cable run is within the limitations specified in the section ' Cable English Version 1.0 Extension Options' User Manuals Software Upgrades Bright spot in video • Night vision reflects when pointing a camera when viewing camera to a window. Move the camera to a different Quick Start Guides Firmware Upgrades at night location.

BNC connection does • Use a BNC to RCA adapter at the end of the Lorex Technologies Inc. not connect to my TV extension cable. Copyright © 2010 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE www.lorextechnology.com Contents Installing The Camera Connecting The Camera 4. Connect the BNC end of the Extension Cable to the • Indoor / Outdoor Color Camera with Night Vision DVR / Observation System or to a TV/VCR. • Mounting Bracket / Stand* ATTENTION - Test all connections and ensure the camera is working correctly prior to permanent installation by temporarily connecting the NOTE: Connect a BNC-to-RCA Adapter (optional, • 60 ft. BNC/Power Extension Cable* camera(s) and cable(s) to the viewing/recording solution. Lorex model # BNCB) as needed to allow for proper • AC Power Adapter** connectivity. To install the camera: * Model CVC6950PK4 is a 4-pack that includes four of the listed items. ** A "4-in-1" Power Adapter (provides power to four cameras) may be substituted 1. Mount the camera stand to the desired mounting surface. for four individual power adapters, depending on product configuration. 2. Attach the camera to the stand at either of the two Features connection points at the back of the camera. • High resolution AIS (Advanced Image Sensor) produces sharp and clear video at 480 TV lines of resolution Connect the BNC cable to a DVR, CCTV, monitor or TV. • Lorex Pure Flat™ lens eliminates image curving for an undistorted view Ceiling Mount 5. Connect the A/C Power Adapter to the 60ft • Anti-glare technology ensures clear images even in Extension cable (Black connector). Plug the Power strong situations adapter to a wall outlet.

• Exclusive built-in auto-mechanical filter Wall Mount Table Mount AC Power Adapter achieves accurate color reproduction in varying lighting Use the stand for ceiling, table, or wall mounting. conditions • Advanced day/night mode - picture automatically 3. Connect the extension cable to the camera: switches to B&W delivering better clarity in low light conditions 4-in-1 Power Adapter (optional) WARNING - A REGULATED UL/CSA APPROVED power supply is REQUIRED To Camera: To Monitor/ DVR: for use with this camera. Use of a non-regulated, non-conforming power supply can damage this product and will void the warranty. Installation Tips Connect an AC power adapter. • Point the camera where there is the least amount of obstructions (i.e. tree branches). Setup Diagram • Install the camera in a location that is difficult for vandals to reach. Male power connector Female power connector • Secure cabling so that it is not exposed or easily cut. • Connect your system and cameras to a back-up power supply. This ensures the system continues to record during power outtages.

Warning / Caution Statements BNC Connector 1. Read this guide carefully and keep it for future reference. Connect the BNC 2. Follow all instructions for safe use of the product. Connect the BNC connector to the video 3. Use the camera within given , humidity and voltage levels noted and power in Camera Specifications. input of the monitor/DVR, 4. Do not disassemble the camera. connectors to the and connect the included 5. Do not point the camera directly towards the sun or a source of intense light. camera. ATTENTION: This camera includes an Auto Mechanical power connector to a IR Cut Filter. When the camera changes between Day/ 6. Use only the supplied regulated power supply. Use of a non-regulated, non- power adapter. conforming power supply can damage this product and voids the warranty. Night viewing modes, an audible clicking noise may be 7. The supplied extension cable is rated for surface mounting only. heard from the camera. This clicking is normal, and Cables for in-wall / floor-to-floor installations are sold separately. indicates that the camera filter is working.