Electronics & Automation Engineering Catalogue

OCEAN CON- Electronics & Automation Engineering Catalogue OCEAN CONTROLS ELECTRONICS & AUTOMATION CATALOGUE June 2012 Office: 3/24 Wise Avenue TROLS Seaford VIC 3198 Australia 9am to 5pm Monday to Friday except public holidays

Post: PO Box 2191 Seaford BC VIC 3198 Australia

Phone: +61 3 9782 5882 Fax: +61 3 9782 5517 Web: www.oceancontrols.com.au Email: [email protected]

June 2012 June 2012 TABLE OF CONTENTS Dear Customer Data Acquisition 1

Welcome to the second edition of our catalog. It has been another busy year Data Loggers 7 with us adding 200 to 300 hundred new products to the catalog. As well as more products we have improved the indexing in the catalog to help you find items Computer Parts 11 Among the new products are PLCs and HMIs from Delta, low cost pressure and flow sensors from AXE, temperature sensors from Comeco and the new Components 13 Fieldlogger from Novus ommunications We have also been designing and manufacturing new products as well as up- C 17 grading our some of our older products. These include the KTA-250 Anemom- eter Interface Card, KTA-266 4 to 20 mA Calibrator, KTA-290 Serial Stepper Programmable Controllers 22 Motor Controller and upgrading ModbusView TCP and ISEE-Modbus TCP software. Remote & GSM Controllers 31 In conclusion I would like to thank you for your continued support and we will endeavour to provide great service and economical solutions to your control emperature rocess ontrollers needs. T & P C 34 PLCs & HMIs 38 Regards, Peter Simmonds, Counters & Timers 41 Managing Director. Electrical Parts 43 Enclosures 49 Mico-controller Programmers 51 Note: As the year progresses we will continue to add and change our products so please visit our website at www.oceancontrols.com.au to Robotics & Motor Controllers 52 see the full range and details about our products. Motors 61 Please note all prices in the catalog are in Australian dollars and are ex GST. Australian customers should add 10% to the price when Stepper Motors 63 purchasing goods Motor Accessories 65 CNC Kits 67 We have a shop front located in Seaford. You're welcome to drop by and speak to our staff regarding the products of your interest or simply just to pick up orders. We offer various payment methods including: Visa, Master Software 69 Card, EFTPOS and Cash. American Express is accepted via the website but not at the shop front. Relays 70 anel eters isplays Visit: Factory 3/24 Wise Ave, Seaford, VIC 3198, Australia P M & D 75 (On the corner of Miles Grove, entrance off Miles Grove) Power Supplies 82 DC-DC Converters 86 PO Box 2191 Seaford BC Battery Chargers & Inverters 88 Vic, Australia 3198 Security 90 Contact Us: Sensors 93 Ph +61 3 9782 5882 Fax +61 3 9782 5517 Signal Conditioners 112 Test Equipment 115 email: [email protected] web: www.oceancontrols.com.au Tools 120 Weather Stations 121 Audio & Lighting 124 Books 126

Ocean Controls Catalogue 2012 OCEANNEW CONTROLSPRODUCTS

New Products Freetronics LeoStick (Arduino Compatiable) The LeoStick is designed to be functionally similar to the upcoming Arduino Leonardo, but given the "honey, I shrunk the kids" treatment! Just pop it into your USB port RFM22B-S2 RF Transceiver breakout board (no cable required!) and upload straight from the Here is the breakout board for the RFM22B which gives you access to the Arduino IDE. We've even included on-board RGB pins. The RFM22B is a low-cost ISM (industrial, scientific, and medical) LED lights and a speaker in this handy sized board. FSK (frequency-shift keying) transceiver module which offers communica- All the usual Arduino pins are present and each tion at 434MHz and adjustable output power of up to +17 dBm. The wide LeoStick comes with low profile header sockets for operating voltage range of 1.8–3.6 V and low current consumption makes plugging in modules, shields and wires. the RFM22 an ideal solution for battery powered applications. SKU: FRA-016 Price each: $27.23ex.GST SKU:SFR-251 Price each: $23.00 ex.GST Features: Features: • Native USB port built-in, no need for any USB or FTDI cables • Frequency Range = 434 MHz • Two Full Color RGB LEDs on-board! Drive different colored outputs and fun feedback from your sketch right away. One RGB LED is com- • Sensitivity = -118 dBm pletely programmable, the other does Power, USB RX and TX indica- • +17 dBm Max Output Power (Configurable) tion, the RX and TX LEDs can also be controlled. • Low Power Consumption • On-board Piezo speaker element, play sounds, tunes and beeps. Can • Data Rate = 1 to 128 kbps also be used as a knock/vibration sensor • Power Supply = 1.8 to 3.6 V • Same I/O pins. The LeoStick provides all the same header connec- • Ultra low power shutdown mode tions as larger boards, you can connect all the same sensors, actua- • Digital RSSI tors, and other inputs and outputs as typical Arduino models. • Wake-on-radio • Breadboard compatible, has 0.1" pitch pads and header pins can be • Auto-frequency calibration (AFC) fitted underneath • Configurable packet structure • 500mA polyfuse and protection on the USB port • Preamble detector • ATmega32U4 microcontroller, Arduino compatible with on-board USB, 32K Flash, 2.5K RAM, 1K EEPROM at 16MHz • TX and RX 64 byte FIFOs • ISP 6-pin connector for advanced programming of the ATmega32U4 • Low battery detector MCU • Temperature sensor and 8-bit ADC • -40 to +85 °C temperature range • Integrated voltage regulators • Frequency hopping capability PS12DC Power Switching Board • FSK, GFSK, and OOK modulation The PS12DC is a power switching board designed for medium to low • Low BOM current DC power switching applications. It is suitable for use with the • Power-on-reset (POR) Labjack U3, U6 and UE9 data acquisition modules. SKU: LAJ-039 Price each: $89.95 ex.GST RFM22 Features: The RFM22 Shield connects the RFM22 module to the appropriate lines on • 12 digitally controlled switches with LED indica- the Arduino. By using the RF22 Library, you can send and receive mes- tors sages via standard 4-wire SPI. • Optical isolation • Handles 5 - 28 Volt supply The shield has on-board power regulation and level shifting. There are one • Up to 750mA/chan pin headers and jumpers on the interrupt (nIRQ), interface select (nSEL), • Resettable fuse protection shutdown input (SDN) and GPIO2 lines so that you can cut the trace and • Flyback protection reroute those lines if you need to for your project. The board also provides a little bit of prototyping space Wet/Dry-Bulb Psychrometer Humidity Measurement SKU: SFA-304 Price each: $29.00 ex.GST Module with 4 to 20 mA output option Features: WetBulb Wick • Frequency Range = Software configurable from ~240MHz to 980MHz • Sensitivity = -118 dBm The Comeco RHU is designed to measure relative • +17 dBm Max Output Power (Configurable) humidity in air and other gases and gas mixtures • Data Rate = 1 to 128 kbps utilizing the well-known method of "dry" and • Digital RSSI "wet" thermometers. • Wake-on-radio • Configurable packet structure It uses 2 identical class 'A' RTD sensors mounted • Preamble detector in stainless steel sheaths mounted on a stainless • TX and RX 64 byte FIFOs steel plate. The plate can be installed inside or • Low battery detector outside drying or moistening chambers. The • Temperature sensor and 8-bit ADC wet/dry bulb method for determining humid- • -40 to +85 °C temperature range ity is especially suitable in areas of high humidity such as fog rooms for horticulture. This version of the module directly presents the Pt100 RF Link Transmitter & Receiver -434 MHz sensor signals. The CMS-123 includes 4 to 20 mA signal conditioners for each sensor. These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create The CMS-129 is a replacement wick keeps the wet sensor a very simple wireless data link. Since these are only transmitters, they of a wet/dry bulb psychrometer moist. It suits our CMS- will only work communicating data one-way, you would need two pairs (of 121 and CMS-123 sensor modules. different frequencies) to act as a transmitter/receiver pair. SKU: CMS-121/ CMS-123 /CMS-129 SKU: WIR-033/ WIR-034 Price each: $299.95/$399.95/$7.95 ex.GST Price each: $5.00/$6.50 ex.GST Specifications: Note: These modules are indiscriminate and will receive a fair • "Dry" thermometer Pt100 amount of noise. Both the transmitter and receiver work at • "Wet" thermometer Pt100 common frequencies and don't have IDs. Therefore, a method of • Conversion range 0% to 100% RH filtering this noise and pairing transmitter and receiver will be • Measurement Temperature Range necessary. -- External Mounting -50 to 200 °C -- Internal Mounting -20 to 120 °C Features: • Measurement Accuracy 1% RH • 434 MHz • Response Time 2 s • 500ft range (given perfect condi- • Manufacturer's Part No. RHUS-BD-X tions) • 4800bps data rate • 5V supply voltage

Ocean Controls Catalogue 2012 OCEANNEW PRODUCTSCONTROLS

4 to 20 mA Loop Powered 96 x 48 mm Backlight LCD DVP-14SS211T Programmable Logic Controller Indicator The DVP-14SS211T supports PID loops with automatic tuning for process The TI200 is a microprocessor-based programmable process indicator, control applications. The transistor outputs allow high speed pulse genera- designed especially to be powered from the input current loop. TI200 tion for servo or stepper motor motion control applications. The program- is equipped with a fully programmable -1999 to 9999 LCD display with ming software runs on Windows and is freely available for download. programmable point position and digital filter as well as with a 2-key SKU: DEC-016 Price each: $149.00 ex.GST keyboard. Front panel IP65 rated. Features: SKU: CMI-002 Price each: $139.00 • Power: 20.4 to 28.8 VDC Features: • Digital Inputs: 8 inputs, 24 VDC sink or source¹ • Loop Voltage: 4 to 36 VDC • Digital Outputs: 6 open collector type transistor outputs • 4 to 20 mA input • Output Rating: 30 VDC, 500 mA each output • Operating range: 3 to 22 mA • Communication Port: RS-232 and RS-485, Mod- • Measurement Range: 4 to 20 mA bus ASCII/RTU master or slave • Measurement Error: ± 0.05% or 1 digit • Program Capacity: 8k steps • Programmable display range from -1999 to • IO Points: Up to 238 via expansion modules 9999 with selectable decimal point • 13 mm tall LCD digits • CE EMC certification DVP-28SV11T Programmable Logic Controller The DVP-28SV11T has expansion ports on both sides. Expansion modules SKJ-4RD/X Fuse Terminal can be mounted on the left (high speed expansion) or right (low speed general purpose modules) of the PLC without external wiring. These DIN rail mount fuse terminals include an LED that lights when the fuse is blown, allowing quick diagnosis of problems in the field. Suitable The unit features a rich command set with PID loops for process control, for 24V Power. Dimensions: 72.5 × 8.2 × 56 mm linear / arc interpolation commands and high speed counters. Two small potentiometers on the front of the unit can be read as analog inputs with SKU: TRM-046 Price each:$3.12 ex.GST 8-bit resolution. The programming software runs on Windows and is freely Specifications: available for download. • Rated Voltage: 660 V • Rated Current: 6.3 A SKU: DEC-026 Price each: $399.00 ex.GST • Fuse: Suits M205 style (not included) Features: • Box quantity: 30 • Power: 20.4 to 28.8 VDC • Digital Inputs: 2 banks of 8 inputs, 24 VDC sink or source¹ Lead-Acid Gel Cell Battery Tester • Digital Outputs: 12 NPN Open collector outputs with shared commons Our KTA218 Battri-Testa allows the battery to be periodically checked • Output Rating: 0.3 A each point under its normal load for a preset time to determine if the battery is • Communication Port: RS-232 and RS-485, Mod- likely to meet the required backup time in the near future. It does this by bus ASCII/RTU master or slave disconnecting mains power and monitoring the bat- • Program Capacity: 16k steps tery voltage during the test. If the battery has fallen • Execution Speed: 0.24 µs per basic instruction below a programmable limit then the test has failed • IO Points: Up to 512 via expansion modules and the battery should be replaced. • High Speed Counters: 4 counters, 200 kHz The results of these tests are logged to non-volatile memory which can be downloaded to a PC at a later Hydreon Optical Rain Sensor - Model RG-11 w/ 6 date. At the completion of each test the Battri- Tester also calculates an expected lifetime of the Digit Counter Option battery. The RG-11 Rain Gauge senses water hitting its SKU: KTA-218 Price each: $139.00 ex.GST outside surface using beams of infrared light. It uses the same sensing principle used in millions of auto- Features: motive rain sensing windshield wiper controls. • Tests can be started manually by pushbutton • Tests can be done at specified times of day and week or weeks The sensor is extremely sensitive, and virtually im- • Tests can be done every specifed number of hours mune to false trips. Yet, it is completely unaffected • Results of up to 100 tests logged to memory by jostling and motion. There are no exposed conductors to corrode, and • Modbus communications. Programable baud rate and parity. no openings for bugs to crawl into. There is no place for leaves or other • Start Test and Reset button debris to collect. • Battery Fail, Run and Low Battery indicator leds We have also combined the Hydreon RG-11 Optical • Expected battery life calculation Rain Sensor with a Novus 6 Digit Counter. With the RG-11 operating in the tipping rain bucket mode the counter will display the amount of rain that has fallen DVP-20SX211T Programmable Logic Controller since the last reset. A modbus RS-485 interface on the The DVP-20SX211T features built-in analog inputs, analog outputs, high counter allows a PLC or SCADA host to communicate speed counters and pulse outputs, a flexible serial port and expansion with the counter to access rain data. This combination ports on both sides. Two small potentiometers on the front of the unit can has our SKU: HYS-0011 be read as an additional 2 analog inputs with 8-bit resolution. The DVP- SKU: HYS-001/ HYS-0011 20SX211T supports PID loops with automatic tuning for process control applications. The programming software runs on Price each: $84.95 ex.GST/ $199.95 ex.GST Windows and is freely available for download The RG-11 Rain Sensor includes a DIP switch that allows it to be set up SKU: DEC-006 Price each: $369.00 ex.GST for the mode of operation that best matches the application. Features: RG-11 Modes of Operation: • Power: 20.4 to 28.8 VDC -- Tipping Bucket Emulation-- Replace your tipping bucket with a • Digital Inputs: 8 × 24 VDC sink or source¹ low maintenance alternative. • Digital Outputs: 6 x NPN Open Collector Outputs -- "It's Raining"-- Close a skylight at the first sign of rain, and open • Output Rating: 0.5 A each point it when it stops raining. • Analog Inputs: 4 × ±10 VDC or ±20 mA (inc. 4 -- Condensation / Frost Sensing to 20 mA) -- Wiper control • Analog Input Resolution: 2 bit (5 mV / 10 µA)² -- Irrigation Control-- No more watering during a downpour! • Analog Output: 2 × ±10 VDC or ±20 mA (inc. 4 to 20 mA) -- Drop Detection • Analog Output Resolution: 12 bit (5 mV / 10 µA)² • Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master or slave • Program Capacity: 16k steps

Ocean Controls Catalogue 2012 OCEANNEW PRODUCTSCONTROLS

RS-232/485/422 to Single or Multi-Mode Fibre Paddle Wheel Flow Sensor/Controller Meter Converter with SC or ST Connectors These are a great economical paddle wheel flow sensor with a NPN Please note these converters are sold individually. Two converters transistor output. Of polypropylene construction they can operate over a are required to form an end-to-end link. temperature range of -10 to 85 °C. The 3onedata Model 277-M-ST-2KM serial Fibre converter provides a cost We also carry another series that come as a Controller Meter. They come effective plug-and-play solution for long-range serial extensions. These with LED display, 2 alarm relays and totaliser pulse (NPN Open Collector) converters are ultra-miniature in size and feature pluggable screw termi- or 4 to 20 mA output with the same operating temperature range as the nals for serial interfaces and SC or ST style fibre-optic connections. sensor. The Model 277 Series incorporates a method for automatically detecting SKU: AXS-400 (Sensor)/ AXS-410 (4 to 20 mA Controller)/ AXS- the serial signal baud rate by hardware. This is an extremely convenient 415 (Pulse out Controller) feature for the user. Even if a device's baud rate is changed, the signal will Price: $239.00 each ex.GST / $319.00 each ex.GST/ $299.00 each still be transmitted through the RS-232 or RS-422/485 to fibre converter ex.GST without any problem. The converter also automatically converts between the half duplex RS-485 and full duplex RS-232 and RS-422 interfaces. Sensor's Features: • Field-rangable supply voltage from 5 to 24 VDC SKU: TOD-064 (Muilti-Mode) / TOD-065 (Single-Mode) • Accuracy±0.75% of full scale Price: $289.00 each ex.GST / $319.00 each ex.GST • Measuring pipe size range DN 15 to DN 600(0.5 to 24 inch) Features: • Measuring flow rate range 0.15 to 8 M/s (0.5 to 26 • Power Supply: 9 to 36 VDC Ft/s) • Power Connectors: Pluggable screw terminals • Field-rangable operting temperature from -10 to 85 • Transmission Mode: Single-Mode or Multi-Mode °C • Wavelength: 1310 nm or 850 nm • Protection class NEMA6,6P (IP68) • RS-232 Connections: In, Out, Gnd • CE EMC certification • RS-485 Connections: D+, D-, Gnd Controller's Features: • RS-422 Connections: R+, R-, T+, T-, Gnd • Auto change red or green on alarm status change • Connection type: Pluggable screw terminals • Accuracy±0.75% of full scale • Baudrate: 0 to 500 kbps • Measuring pipe size range DN 15 to DN 600(0.5 to • RS-485 Direction Control: Automatic 24 inch) • Surge Protection: 600 W • Measuring flow rate range 0.15 to 8 M/s(0.5 to 26 • ESD Protection: 15 kV Ft/s) • Dimensions: 100 × 69 × 22 mm • Field-rangable supply voltage from 14 to 28 VDC • Case: Steel • Display flow units Litre, Gal,Cub metre, • Dual alarm function • 16 bit DAC 4-20mA analog output • Field-rangable operating temperature from -10 to 85°C • Protection class NEMA4 (IP65) • CE EMC certification

CPVC Tee Fitting RS-232 to Single or Multi-Mode Fibre Converter with CPVC Tee Fitting for the Paddle Wheel Flow Sensors AXS-400, AXS-410 SC or ST Connectors and AXS-415. They come in 4 various sizes ranging from 25 mm to 100 mm Please note these converters are sold individually. Two converters are required to form an end-to-end link. SKU: AXS-4312 (25 mm)/ AXS-4315 (50 mm)/ AXS-4317 (80 mm)/ AXS-4318 (100 mm) The 3onedata Model 277A-M-ST-2KM serial fibre converter provides a cost effective plug-and-play solution for long-range serial extensions. These Price: $54.95 each ex.GST / $89.95 each converters are ultra-miniature in size and feature pluggable screw termi- ex.GST/ $139.95 each ex.GST/ $176.95 each nals for serial interfaces and SC or ST style fibre-optic connections. ex.GST The Model 277 Series incorporates a method for automatically detecting the serial signal baud rate by hardware. This is an extremely convenient feature for the user. Even if a device's baud rate is changed, the signal CPVC +PP Clamp Saddles will still be transmitted through the RS-232 to fibre converter without any problem. CPVC+PP Clamp Saddles for the Paddle Wheel Flow Sensors AXS-400, AXS-410 and AXS-415. They come in 3 various sizes, ranging from 50 SKU: TOD-062 (Multi-Mode) / TOD-063 (Single-Mode) mm to 100 mm. Price: $249.00 each ex.GST / $289.00 each ex.GST SKU: AXS-4320 (50 mm)/ AXS-4322 (80 mm)/ Features: AXS-4323 (100 mm) • Power: 5 VDC (240 VAC Plug pack included) Price: $76.95 each ex.GST / $92.50 each ex.GST/ • Power Connectors: DC Jack $99.00 each ex.GST • Standard: RS-232 • RS-232 Connections: In, Out, Gnd • Connection type: Female DE-9 • Baudrate: 0 to 120 kbps • Surge Protection: 600 W • ESD Protection: 15 kV CPVC Glue-On Adapters • Wavelength: 1310 nm or 850 nm • Fibre Connections: In, Out CPVC Glue-On Adapters for the Paddle Wheel Flow • Connector Type: Dual SC/ST connector Sensors AXS-400, AXS-410 and AXS-415 • Dimensions: 100 × 69 × 22 mm • Case: Steel SKU: AXS-4301 Price: $39.00 each ex.GST

Ocean Controls Catalogue 2012 OCEANDATA ACQUISITION CONTROLS

Data Acquisition LabJack UE9 and UE9-Pro USB/Ethernet data acquisition module. A high speed and accurate data acquisition module which can connect via a LabJack U12 USB2.0 or 10M Ethernet connection. The USB-based multifunction data acquisition and control UE9-Pro has all the features of the normal UE9 device. This simple to use data acquisition module has with the addition of an auxiliary low-speed been extremely popular over the years we have been hiresolution (24 bit) sigma-delta ADC. selling it. Features: Features: • 14 analog inputs (12 to16 bits depending on speed) • 8 Single-Ended, 4 Differential 12 Bit analog Inputs • UE9-Pro Adds 24 bit low-speed ADC for 22 bit effective resolution • ±10 V analog input range • Single-Ended Inputs (14) or Differential Inputs (7) • PGA with Gains of 1, 2, 4, 5, 8, 10, 16, or 20 V/V • ±5 V or 0 to 5 V maximum analog input range • Up to 8 kSamples/Sec (Burst) or 1.2 kSamples/ Second (Stream) • Analog input streaming up to 50 kHz (Ethernet) • Supports software or hardware timed acquisition and triggered acqui- • 2 Analog outputs sition • 2 Counters (32 bit) • 2 Analog outputs (0 to 5 V) • Up to 6 timers (pulse counting / timing, PWM output, quadrature • 20 Digital I/O (Up to 50 Hz per I/O) input) • 32-Bit Counter • 23 Digital I/O • Easy to Use Plug-and-Play USB Device • 10M Ethernet or USB2.0 connection • Connect Up to 80 LabJacks to One USB Port • Supports software or hardware timed acquisition • Complete Software Control, No Jumpers or Switches • Drivers Available for Windows, Linux, Mac and Pocket PC • No Power Supply Needed • Example code available for C/C++, VB, LabVIEW, Java, Python and more • Includes DaqFactory Express Software • Includes licensed copy of DAQFactory express software • Includes Application and Driver Software for VB, C++, Delphi, Java • Free firmware upgrades • Includes LabVIEW VIs • Works with Windows 98SE, ME, 2000, XP or Vista • Approximately 4" x 6" x 1" Price Each 1 5+

LAJ-011 Labjack UE9 $549.00 less 10% Price Each 1 5+ LAJ-015 Labjack UE9-Pro $679.00 less 10% LAJ-001 Labjack U12 $175.00 less 10%

LabJack U6 Data Aquisition Module LabJack U3 USB Data Acquisition Module LV/HV The LabJack U6 is their mid-range data The Labjack U3-LV and U3-HV are the newest aquisition module. It features an inter- compact data acquisition modules from Labjack nal temperature sensor for cold junction Corporation. They pack outstanding features in a compensation of thermocouples and fixed, cost-effictive package. high precision current sources for measuring resistances. The LV version has analog inputs capable of up to 3.6V. The HV version has 4 analog inputs capable of The U6-Pro has all the features of the normal U6 with the addition of an sampling ±10 V or -10 to 20 V signals. auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC. Features: Features: • U3-LV: 16 Flexible I/O (digital input, digital output, or analog input) • 14 analog inputs (16 to 18+ bits depending on speed) U3-HV: 12 Flexible I/O and 4 ±10 V or -10 to 20 V analog inputs • U6-Pro adds 24-bit low-speed ADC for 22 bit effective resolution • U3-LV: 8 Flexible I/O accesible by screw terminals on the unit • 14 single ended or 7 differential input channels U3-HV: 4 Flexible I/O and 4 HV analog inputs accesible by screw • Signal amplifier with software programmable gains of ×1, ×10, and terminals on the unit ×100 • Other Flexible I/O accessible by the DB-15 jack on the bottom of the • Analog input ranges of ±10, ±1, and ±0.1 V unit. • Built-in cold-junction compensated temperature sensor • Up to 2 timers (pulse counting / timing, PWM output, quadrature • 2 fixed current outputs (200/10 µA) input) • 2 analog outputs (12 bit, 0 to 5 V) • Up to 2 counters (both 32 bit) • 20 digital I/O • 4 Additional digital I/O • Up to 2 counters (both 32 bits) • Up to 16 12 bit analog inputs (0 to 2.4 V or 0 to 3.6 V, single ended • Up to 4 timers (pulse counting / timing, PWM output, quadrature or differential) input) • 2 Analog outputs (10 bit, 0 to 5 V) • Supports SPI, I²C, and asynchronous serial • Supports SPI, I²C, and asynchronous serial • Supports software or hardware timed acquisition • Built-In screw terminals for some signals • Maximum input stream rate of 50 kHz (depending on resolution) • USB 2.0/1.1 Full Speed interface • USB 2.0/1.1 Full Speed interface • Powered by USB cable • Drivers available for Windows, Linux, Mac and Pocket PC • Drivers for Windows, Linux, Mac and Pocket PC • Includes licensed copy of DAQFactory Express software for Windows • Example code available for C/C++, VB, LabVIEW, Java, Python and • Enclosure size approximately 75 × 185 × 30 mm (3 × 7 × 1 inches) more • Rated for industrial temperature range (-40 to 85 C) • Includes licensed copy of DAQFactory Express software for Windows ° • Includes USB cable and screwdriver • Enclosure size approximately 75 × 115 × 30 mm (3 × 4.5 × 1.2 Price Each 1 5+ inches) • Rated for industrial temperature range (-40 to 85 °C) LAJ-041 Labjack U6 Data Acquisition Module $389.00 less 10% LAJ-042 Labjack U6-Pro Data Acquisition Module $469.00 less 10% Price Each 1 5+

LAJ-021 Labjack U3-LV USB Data Acquisition $149.95 less 10% Module CB-15 LabJack U3 Terminal Board Provides convenient screw terminals for the DB-15 con- LAJ-022 Labjack U3-HV USB Data Acquisition $159.00 less 10% Module nector on the LabJacks U3, U6 and UE9. The CB-15 can connect directly to the DB-15 connector on the LabJack UE9.

Prices for items may change due to currency Price Each 1 5+ fluctuations. Check our website for the latest LAJ-014 CB-15 Terminal Board $55.00 less 10% prices. Prices listed in this catalogue is ex.GST

Ocean Controls Catalogue 2012 Page 1 OCEANDATA ACQUISITION CONTROLS

CB-25 U12 LabJack Terminal Board LabJack LJTick-Proto Most of the connections on the LabJack U12 have built-in The LJTick-Proto (LJTP) consists of an 8 x 8 grid of screw terminals, but 16 of the digital I/O are accessed holes for prototyping custom signal conditioning cir- with a DB-25 connector. To ease the use of these digital cuitry for the LabJack U3, U6 or UE9. ports the CB25 provides screw terminal connections. It also provides short-circuit/overvoltage protection for the 16 I/O which are accessed through the DB25 connector.

Price Each 1 5+ Price Each 1 5+

LAJ-002 CB-15 Labjack Terminal Board $69.00 less 10% LAJ-033 LJTick-Proto $21.50 less 10%

CB-37 Screw Terminal Board LabJack LJTick-Current Shunt EB-37 Experiment Board The LJTick-CurrentShunt (LJTCS) is a signal-conditioning These boards connect to the BD-37 socket on the back of the LabJack U6 module designed to convert a 4 to 20 mA current loop and U6-Pro. input signal into a 0.47 to 2.36 volt signal compatible with the LabJack U3 or UE9. The 4-pin design plugs into The EB-37 experiment board provides screw terminals and solderless the standard AIN/AIN/GND/VS screw terminal block breadboard.The EB-37 supplies a range of useful voltages (±10 V, 3.3 V found on newer LabJacks such as the U3, U6 and UE9. and 1.25 V). Includes a screwdriver, power supply, and jumper wires. For (RoHS=YES). the LabJack UE9 only.

Price Each 1 5+

LAJ-034 LJTick-Current Shunt $59.95 less 10%

LJTick-DAC Provides a pair of 14 bit analog outputs with a range of ±10 V. Plugs into any digital I/O block thus up to Price Each 1 5+ 10 of these can be used per Labjack U3, U6 or UE9 to LAJ-012 CB-37 Terminal Board $69.00 less 10% add 20 analog outputs.

LAJ-013 EB-37 Experiment Board $149.00 less 10%

LabJack LJTick-Divider Price Each 1 5+ The LJTick-Divider (LJTD) is a signal-conditioning mod- LAJ-035 LJDAC - Digital to Analog Converter $112.50 less 10% ule designed to divide 2 single-ended channels of 0 to 10 volt analog signals down to 0 to 2.5 volt signals. The 4-pin design plugs into the standard AIN/AIN/GND/VS Labjack LJTick-Level Shifter screw terminal block found on newer LabJacks such as The LJTick-Level Shifter is a version of the LJTick- the U3,U6 and UE9. Divider that divides 2 single-ended channels of -10 to 10 V analog signals down to 0 to 2.5 V signals. Price Each 1 5+ The 4 pin design plugs into the standard AIN/AIN/ GND/VS screw terminal block found on newer LAJ-030 LJTick-InDivider $41.50 less 10% LabJacks such as the U3, U6 and UE9. The use of large resistors and a precision op-amp buffer provide an input impedance of 1 MΩ. By adding or LabJack LJTick-InAmp replacing resistors, many other configurations are possible. Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges, load cells) and Price Each 1 5+ thermocouples. LAJ-036 LJTick-Level Shifter $41.50 less 10% The LJTIA has switches to choose from 5 gain settings (x1, x11, x51, x201, or custom) and two output voltage offsets. The 4-pin design plugs into EI-1040 Dual Instrument Amplifier the standard AIN/AIN/GND/VS screw terminal block A dual instrumentation amplifier from Electronic Innovations Corp found on newer LabJacks such as the U3,U6 and provides 2 high-impedance differential inputs. UE9. (RoHS=YES). Operates from a single 5 volt supply and provides a ±15 volt supply and a 4.096 volt reference. Analog Price Each 1 5+ input range is ± 10 volts. The gain of each channel is set to 1, 10, 100, or 1000 via digital I/O or jumper LAJ-031 LJTick-InAmp $74.00 less 10% wires. Typical current requirement is about 80 mA @ 5 volts, allowing the EI-1040 to be powered from a +5V terminal on the LabJack U12. LabJack LJTick-RelayDriver The LJTick-RelayDriver (LJTRD) allows 2 digital I/O lines on a Labjack U3, U6 or UE9 to drive relays or other moderate loads. Rated to 50 V at 200 mA. Price Each 1 5+

LAJ-004 EI - 1040 Dual Instrument Amplifier $159.00 less 10%

Price Each 1 5+ Most of our orders are shipped by courier or LAJ-032 LJTick-RelayDriver $24.00 less 10% Express Post so you receive your items quickly. We can use your courier service if you prefer. Pick-up can also be arranged.

Page 2 Ocean Controls Catalogue 2012 OCEANDATA ACQUISITION CONTROLS

J,K Thermocouple Amplifier 10mV/Deg Out Stainless Steel Temperature Probe The KTx-254 thermocouple amplifier board is An easy to use, very accurate and waterproof temperature probe designed to allow the connection of J or K type from Electronic Innovations Corp. thermocouples to data acquisition systems which do not include dedicated thermocouple The sensor is mounted in a stainless steel inputs. Depending on the ordering code the J or sheath and features a high-level linear output K type thermocouple can be conditioned to give of 10 mV/°F with a typical accuracy of ±0.25 10mV per °C or 0 to 20mA or 4 to 20mA over °C (±0.4 °F) at room temperature and a range the range 0 to 200°C or 0 to 1000°C. of -17 to 150 °C (0 to 300 °F.) Can be used Additional to this the board can be ordered with with all LabJacks but can also be used with any other non-thermocouple configurations, such as, 0 to 2V or 0 to 10V input other voltage measuring device. to 0 to 20mA or 4 to 20mA output, or with LM35 temperature sensor input to 4 to 20mA output. A DIN rail mount is also available to allow for easy Price Each 1 5+ mounting to DIN rail. LAJ-006 Stainless Steel Temperature Probe $82.50 less 10% The thermocouple amplifier card uses the AD594 (J Thermocouple) or AD595 (K Thermocouple) integrated circuits. Each of these feature inbuilt cold junction compensation. The AD594/5 will output 10mV/°C which is EI-1050 Digital Temperature/Humidity Probe available on one of the screw terminal connections. The card can also be fitted with a AD694 which will convert the output of the AD594/5 to a 0 to The EI-1050 uses two digital lines on a LabJack U12 (IO0 and IO1) to re- 20mA or 4 to 20mA signal. trieve temperature and relative humidity measurements. Can also be used with Labjack U3, U6 and UE9.

Price Each 1 5+ Featuring the Sensirion SHT11 sensor it provides 14 bit temperature readings and 12 bit humidity KTA-254 J Thermocuple amplifier 10mV/Deg out $45.00 less 10% readings. An enable line is provided allowing up KTB-254 J Thermocouple amplifier 4 to 20mA out $65.00 less 10% to 20 EI-1050 probes to be connected to a single LabJack U12. KTC-254 K Thermocouple amplifier 10mV/Deg out $45.00 less 10% Measurement range is -40 to 120 °C for temperature and 0 to 100% for humidity. Accuracy is KTD-254 K Thermocouple amplifier 4 to 20 mA out $65.00 less 10% ±0.5 °C at 25 °C and ±3.5%. KTE-254 0 to 10V to 4 to 20mA Converter $45.00 less 10%

KTF-254 LM35 to 4 to 20mA converter $65.00 less 10% Price Each 1 5+

KTG-254 DIN rail mount $13.50 less 10% LAJ-005 EI-1050 Digital Temperature/Humidity $105.00 less 10% Probe

KIT/KTA-20x Dual DC Amplifier myPCProbe Temperature or Temperature & Humidity Our dual amplifier or voltage divider module allows you to Sensor Probes amplify signals by a factor of 1.5 to 10 or reduce signals by a factor 0.667 to 0.1. The probe appears as a serial port. It comes with basic logging and display software for Windows. The dual DC amplifier circuit consists of two non inverting Other operating systems can also access the data amplifiers with a voltage divider at the input. Each ampli- from the probes with appropriate software. fier is identical in design and is issued with one 50 kΩ potentiometer. Whether the circuit amplifies or reduces Features: the amplitude of the signal depends on where the 50 kΩ • 1.5 m cable with Type-A USB plug. Virtual potentiometer is placed on the circuit. A simple jumper serial port driver allows the circuit to operate off a 9 to 24 VDC supply for • ASCII & Modbus RTU communication pro- amplification of unipolar signals or it can be powered by a tocols • Powered by the USB bus ±9 to 15V supply for amplification of bipolar signals. • Free Windows software provides configura- You can purchase the dual amplifier module as a kit or fully assembled tion, visualisation, recording and data export. and tested. If you are purchasing it assembled and tested it comes in 3 • Software supports multiple myPCProbe and myPCLab devices simultaneously forms: • Data export formats: plain text, Microsoft Excel, RTF, PDF, HTML, XML, • Dual Amplifier dBase, CSV • Dual Voltage Divider • Amplifier and Voltage Divider myPCProbe-RHT Features: • Temperature and humidity sensing If you require 4 to 20 mA conversion to voltage contact us with your • Temperature range from -20 to 100 °C required voltage output. The card can be mounted on DIN rail with the • Humidity range from 0 to 100 %RH optional DIN rail mounting kit. • One sample every 1 or 3 seconds depending on the programmed resolution • 30 s temperature response time in still air Price Each 1 5+ • 4 s relative humidity response time in still air KIT-200 Dual Amplifier as a kit $25.00 less 10% myPCProbe-TEMP Features: KTA-201 Dual Amplifier Assembled $39.00 less 10% • Pt100 RTD temperature sensing element in two probe lengths • Cable resistance compensation KTA-202 Dual Volt Divider Assembled $39.00 less 10% • 0.2% of full scale accuracy. • 8 to 128 samples per second, depending on the ADC resolution KTA-203 Dual Amp & Volt Divider Assembled $39.00 less 10% • Programmable ADC resolution from 15 to 11 bits KIT-204 DIN Rail Mount $13.50 less 10% We have two versions of the myPCProbe-TEMP available: a 300 mm and a 150 mm version. The probes are stainless steel with the sensing element General Purpose Voltage Output Temperature Probe near the pointed tip. Both probes are 6 mm in diameter. An inexpensive and easy to use temperature probe. Designed to work with a LabJack, the probe can also be Price Each 1 5+ used with any voltage measuring device. Outputs 10 NOV-020 myPCProbe Humidity and Temperature $159.00 less 10% mV/°C and has a range of -40 to 100 °C. Probe

NOV-021 myPCProbe 6 x 300mm temperature $149.00 less 10% probe

Price Each 1 5+ NOV-022 myPCProbe 6/3 x 150mm sharp temp. $149.00 less 10% probe LAJ-003 General Purpose Voltage Output Tempera- $51.95 less 10% ture Probe

Ocean Controls Catalogue 2012 Page 3 OCEANDATA ACQUISITIONCONTROLS

4 Channel Digital Temperature Logger RJ45 to Screw Terminal Breakout Board This kit is a 4 channel temperature meter and The RJ45 female connector to screw terminal card logger. The temperature data, in degrees C or F, allows you to easily connect to screw terminals. is output as a continuous data stream over an The board can be used bare and have four mount- RS-232 serial port. The kit uses a PIC12C509 and ing holes in the corners. It also has a DIN rail up to 4 x DS18S20 digital thermometers (only 1 is mount version (pictured) for use in cabinets and supplied - more are available on request. See part installations. numbers PTP-001, KTA-001 and EDS-001).

The DS18S20 has an operating temperature range Price Each 1 5+ of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. The sensors can be mounted up to DTC-045 RJ45 to screw terminal breakout board $39.00 less 10% 200metres away from the logger. DTD-045 RJ45 to screw terminal board on DIN rail $45.00 less 10% Each DS18S20 has a unique 64-bit serial code, which allow multiple mount DS18S20s to function on the same 1-Wire bus. This function make it easy for a microprocessor to control multiple DS18S20 distributed on the same 1-Wire bus. No external power is required as the kit is powered from D-Sub to Screw Terminal Breakout Boards the serial port. The output data is in simple text format, simply capture These D-sub to screw terminal boards break out all the pins of the con- the data to a text file and then import it into Excel to produce tables nector to screw terminals for easy access. The cards can be used bare and charts of temperature readings over time. An easy to use windows and have four mounting holes in the corners. Each card also has a DIN rail program called Temp Logger (suitable for 98,NT, ME, 2000 and XP) is sup- mount version (pictured) for use in cabinets and installations. plied with the logger. Two connector types are available: male DB-25 and female DB-9. The male DB-25 suits parallel port or printer cables and can be used with the Price Each 1 5+ DAS005 or Labjack U12. KIT-145 Temperature Logger as Kit $36.00 less 10% The female DB-9 plug is often used in serial communications networks KTA-145 Temperature Logger Assembled and $49.95 less 10% and can be useful for connecting RS-232, RS-485 and RS-422 networks to Tested devices that use the DB-9 plug.

PTP-003 DS18S20 Temperature Sensor $6.50 less 10%

myPCLab Data Acquisition Module MyPCLab is a very compact data acquisition module which connects to a PC via a USB port. It has two universal analog inputs (Thermocouples type J, K, T, E, N, R, S and B, Pt100 RTD (3-wire), 4 to 20 mA, 0 to 50 mVDC or 0 to 10 VDC) and one digital input. Price Each 1 5+ It comes with an intuitive and easy-to-use Windows software which plots and records data, shows gauges, DTC-025 Male DB-25 to screw terminal breakout $45.00 less 10% bargraphs and digital readouts. The USB port is ac- board cessed as a virtual serial port and uses either Modbus DTD-025 Male DB-25 to screw terminal board on $65.00 less 10% RTU or an ASCII protocol for communication. This makes it easy to DIN rail mount interface with SCADA or other software. Multiple myPCLab units can be connected to the same computer. DTC-009 Female DB-9 to screw terminal breakout $39.00 less 10% board Specifications: • 0.2% of full scale accuracy for Pt100, current and voltage DTD-009 Female DB-9 to screw terminal board on $45.00 less 10% • 0.25% of full scale or ±3 °C accuracy for R, S and B thermocouples DIN rail mount • 0.25% of full scale or ±1°C accuracy for all other thermocouples • ±1.5ºC accuracy for internal temperature sensor. RS-485 Distribution Board Price Each 1 5+ This card allows you to connect several RS-485 devices. These have been primarily designed to NOV-010 myPCLab Data Acquisition Module $129.00 less 10% connect the Moscad RTU RS-485 port via an RJ45 or RJ11 connector. USB Experiment Interface Board It allows multiple devices such as VSD drives, PID controllers etc. to be connected together. Up to 4 The K8055 interface board has 5 digital input devices can be connected via terminals. RJ45 or channels and 8 digital output channels. In addi- RJ11 cable can be provided to allow connection to a Moscad RTU. tion, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by Price Each 1 5+ connecting more (up to a maximum of four) cards to the PC's USB connectors. All communication OCH-001 RS-485 Distribution Card (RJ11 connec- $30.00 less 10% routines are contained in a Dynamic Link Library tor) (DLL). You may write custom Windows (98SE, 2000, Me, XP) applications OCH-002 RS-485 Distribution (RJ11) in DIN rail $40.00 less 10% in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows applica- mount tion development tool that supports calls to a DLL. OCH-003 RS-485 Distribution (RJ11) DIN rail and $45.00 less 10% Features: RJ11 Cable • Diagnostic / Test Software: separate output / input test • Clear all / set all function OCH-010 RS-485 Distribution (RJ45 connector) $30.00 less 10% • Counter function on inputs 1 and 2 with adjustable debounce (max 2 OCH-011 RS-485 Distribution (RJ45) in DIN rail $40.00 less 10% kHz depends on total I/O load) mount • Analogue output set sliders, analogue input bar-graph indication OCH-012 RS-485 distribution (RJ45) DIN rail and $45.00 less 10% Price Each 1 5+ RJ45 cable

VK-8055 USB Experiment Interface Board as kit $63.60 less 10%

VK-8055A USB Experiment Interface Board As- $95.00 less 10% Online ordering is available 24/7 at: sembled www.oceancontrols.com.au

Page 4 Ocean Controls Catalogue 2012 OCEANDATA ACQUISITIONCONTROLS

Modbus RTU Basic I/O Card Digirail Modbus Module 2 Relay Outputs This general purpose Modbus RTU I/O features a wide range of input This Modbus RTU module can be used to switch loads and output styles in one unit. It comes with two 10 bit on and off. Configured via Modbus or using a simple analog inputs that can be 0/4 to 20 mA or 0 to 5 V. Windows utility. LED indicators for communication and Modbus RTU Slave Address can be set, baudrate and status as well as DIN rail mount option. parity selectable. Features: Communication is via RS-232 or RS-485. It is avail- • 2 Relay outputs: 3A / 250Vac SPDT relay, resis- able as a bare PCB with mounting holes in each corner tive load. (pictured) or in DIN rail mounting. Requires 12 to 15 • Power: 10 to 35Vdc, 50mA maximum current. VDC input. • 2-wire RS-485 communication with Modbus RTU protocol. Configurable address and baud rate Features: (1,200 to 115,200bps). • Six digital inputs can sense NPN, relay contacts or 0 to 5V TTL signals • LED indicators for communication and status. • Two relay outputs with Normally open and closed contacts. Relays can • Isolation: 1000Vac from inputs and power or communication. switch 5A @240VAC resistive load. • Windows based configurator software. • Analog output options: 0 to 5 Volts, 4 to 20 mA • Dimensions: 72 x 78 x 19mm. • Mounting: 35mm DIN rail. Price Each 1 5+ • Working temperature: 0 to 70°C.

KTA-214 Modbus Basic I/O Card with 0 to 5 V $114.50 less 10% Analog Output Price Each 1 5+

KTA-215 Modbus Basic I/O Card with 4 to 20 mA $114.50 less 10% SIG-102 Digitail-2R 2 Relay Output Modbus Module $149.00 less 10% Analog Output

KTD-214 Modbus Basic I/O Card with 0 to 5 V $139.00 less 10% FieldLogger Modbus Remote I/O 24VDC Analog Output DIN rail This microprocessor based data acquisition and re- KTD-215 Modbus Basic I/O Card with 4 to 20 mA $139.00 less 10% corder can handle any analog input Thermocouple, Analog Output on DIN rail RTD, 4 to 20mA or mV. It will operate as a Modbus Slave linked to a PC or PLC for on line recording and supervision. Digirail-2A, 2 Channel Analog Input Modbus Module DIN rail compatible, the FieldLogger has 8 universal The Novus DigiRail series of Modbus RTU IO modules are rugged, isolated channels that will accept different input sensors at DIN rail mount units for SCADA or PLC systems. The the same time and can be easily expanded. Power: DigiRail-2A features 2 universal analog inputs that ac- 85 to 264 VAC, optional 24 VDC cept a wide variety of temperature sensors and analog signals. Features: • Input resolution: 12,000 levels. It has a cold junction compensation for the termocou- • Accuracy: 0.1% of full scale. ples and the Pt100 3-wire cables. As well as an open • Scanning: 8 channels in 0.5 seconds. loop detection for thermocouples, Pt100 and mV with a • Reading rate: from 0.2s to 1 day. 10 Hz sampling rate for mV, V and mA input. It has LED • Alarms: 2 relays 3A for the 8 channels. indicators for communication and status. It communi- • RS-485, MODBUS - RTU, 19200 bps. cates with Modbus RTU via a 2-wire RS-485 and can be • ABS enclosure mounted on a standard 35 mm DIN rail. Features: Price Each 1 5+ • 10 to 35 VDC powered, 50 mA maximum current • Accuracy (at 25°C): Pt100, mV, V and mA: ±0.15% of full scale. NOD-020 FieldLogger Modbus Remote I/O 24VDC $499.00 less 10% Thermocouples: ±0.25% of full scale. NOD-021 FieldLogger Modbus Remote I/O 240VAC $499.00 less 10% • Temperature effect: 0.003% of full scale/°C. • 1000 VAC isolation from inputs (analogue or digital) and power or communication. AirGate Modbus (Gateway RS-485/Wireless)

Price Each 1 5+ AirGate-Modbus is a wireless multifunctional gateway that allows the transparent and easy insertion of wireless branches into existing wired SIG-100 Digirail-2A 2 Channel Digital Input Mod- $149.00 less 10% RS-485 networks. The AirGate-Modbus has four operation modes, Modbus bus Module Master, multiplexer, USB RS-485 converter and simple wireless RS-485 extension. Digirail-4C, 4 Channel Analog Input Modbus Module A proprietary protocol based on IEEE 802.15.4 facilitates operation in Star mode, allowing the connection of several wireless segments to an existing The Novus DigiRail series of Modbus Digital RTU IO modules are rugged, Modbus RS-485 network. There are up to 16 operating channels with a isolated DIN rail mount units for SCADA or PLC systems. The Digirail-4C maximum transmission power up to 100 mW. can be used to monitor the status of digital inputs or count pulses and is configured via Modbus or using a simple Windows utility. Features: • Operating Band ISM 2.4 GHz Its digital inputs can be activated by 4 to 35 V with an • Indoor range up to 100 m and 1000 m internally limited current up to 5 mA. One channel has a outdoors maximum frequency of 100 kHz and the other three have • RF data rate up to 250 Kbps a maximum frequency of 1 kHz. It has LED indicators for • Network identifier (PAN ID) communication and status. It communicates with Modbus • AES-CBC-128 Data cryptography (Advanced RTU via a 2-wire RS-485. Encryption Standard) • Serial port Baud Rate 1200 to 115.2 Kbps Features: • RP SMA female connector (Plug) • Counting capacity (per input): 32 bits (0 to • Antenna gain 2 dBi 4294967295) • USB Device (Mini-B) • Power: 10 to 35Vdc, 50mA maximum current. • Status indication LEDs • Key for resetting communication parameters to original factory default. • Isolation: 1000Vac from inputs (analog or digital) and power or com- Price Each 1 5+ munication. NOW-001 AirGate Modbus (Gateway RS-485/Wire- $489.95 less 10% less) Price Each 1 5+

SIG-101 Digirail-4C 4 Channel Digital Input Mod- $149.00 less 10% bus Module Please note that prices in the catalogue DO NOT include GST

Ocean Controls Catalogue 2012 Page 5 OCEANDATA ACQUISITIONCONTROLS

COZ100 Zigbee Wireless Coordinator with Ethernet/ DIZ100/ D0Z100 ZigBee Wireless Digital Input Transmit- RS-232/RS-485 Interface ter SensingTEK ZigBee wireless transmission modules The DIZ100 works by periodically transmitting the support the IEEE 802.15.4 Protocol allowing auto- value of each the digital inputs to the coordina- matic message transmission from nodes through tor. A PC or PLC acting as a Modbus master will wireless routers to a centralised coordinator. As a poll the coordinator for the DIZ100 readings using result the modules can be easily used in applica- the Modbus function 2 (read Input Status). All tions requiring wide area monitoring or control configuration of the DIZ100 and the coordinator where nodes are widely scattered. is done using the SensingTek Engineering Toolbox software. Using the wireless I/O modules with the COZ100 Modbus TCP coordinator a SCADA solution can be quickly configured to allow cost effective moni- Features: toring and control of your factory, offices or compound without the need • 2.4 GHz, Wireless sensor transmission technology. for expensive cabling. 6 VDC Power adaptor included. • 4 Digital inputs. Sense dry contact closure. • 3 Digital outputs, Relay contacts Features: • Can be used with a Modbus (COZ232M) or ModbusTCP (COZ100M) • 2.4 GHz, Wireless sensor transmission technology. coordinator. • Transmit and Power Status LEDs • Transmit and Power Status LEDs • 5dBi omni-directional antenna • 3 dBi omni-directional antenna • 12 VDC Power adaptor included Price Each 1 5+

STW-020 COZ100 ZigBee Wireless co-ordinator $489.95 less 10% Price Each 1 5+ with ethernet STW-060 DIZ100 ZigBee wireless digital input $299.95 less 10% STW-025 COZ100 Zigbee wireless co-ordinator with $489.95 less 10% transmitter RS-232 STW-065 D0Z100 ZigBeed wireless digital input $299.95 less 10% STW-027 COZ100 Zigbee wireless co-ordinator with $489.95 less 10% transmitter RS-485 THZ100 Temperature Humidity Wireless Transmitter RTZ232 RS-232 Modbus to ZigBee Wireless Router SensingTEK ZigBee wireless transmission modules SensingTEK ZigBee wireless transmission support the IEEE 802.15.4 Protocol allowing automatic modules support the IEEE 802.15.4 protocol message transmission from nodes through wireless allowing automatic message transmission from routers to a centralised coordinator. nodes through wireless routers to a centralised Features: coordinator. • 2.4 GHz, Wireless sensor transmission technology. As a result the modules can be easily used in • THZ100 has sleeping mode to reduce standby power consuming. 2 AA alkaline batteries can have the item operated applications requiring wide area monitoring or for one year at data rate of one minute. control where nodes are widely scattered. An example of a tree structure • Can be used with a Modbus (COZ232M) or ModbusTCP (COZ100M) is shown in the image below. coordinator. • Transmit and Power Status LEDs Using the RTZ232 with a Modbus RTU or Modbus TCP coordinator a SCADA • 3 dBi omni-directional antenna solution can be quickly configured to allow cost effective monitoring and • 3 VDC Power adaptor can be used to power it. control of your factory, offices or compound without the need for expensive cabling. Price Each 1 5+ Features: • 2.4GHz, Wireless sensor transmission technology. STW-070 THZ100 Temperature Humidity wireless $269.95 less 10% • RS-232 serial port transmitter • Can be used with a Modbus (COZ232M) or Modbus TCP (COZ100M) coordinator. • Transmit and Power Status LEDs Infrared 4 to 20 mA Temperature Transmitter • 5 dBi omni-directional antenna included • 12 VDC Power adaptor included A non-contact infrared temperature sensor from SensingTek, which makes use of thermal radiation released from an object's surface to determine temperature. It features a short temperature Price Each 1 5+ measurement time of 300 ms, linear temperature output and a 12:1 D:S ratio. These sensors STW-030 RTZ232 RS-232 Modbus to Zigbee wire- $299.95 less 10% less router are widely used in non-destructive testing and fault diagnosis fields. Features: AIZ100 ZigBee Wireless Analog Input Transmitter • 1/16 ºC resolution The AIZ100 works by periodically transmit- • 4 to 20 mA output ting the value of each the analog inputs to the • Great for stationary or moving targets coordinator. A PC or PLC acting as a Modbus • Great for measuring hazardous or inaccessible objects (High-voltage parts, great measurement distance). master will poll the coordinator for the AIZ100 • Measuring temperatures from 0 to 400 °C. readings using the Modbus function 4 (read • No risk of contamination or mechanical effect on the target. input registers). The AIZ100 and the coordinator are configured using the SensingTek Engineering Toolbox Price Each 1 5+ software. Additionally, the AIZ100 has three internal jumpers for selecting voltage or current input. STW-080 Infrared 4 to 20 mA Temperature trans- $309.00 less 10% mitter Features: • 2.4GHz, Wireless sensor transmission technology. • 3 analog inputs • Analog inputs can be configured for 0 to 1 V, 0 to 5 V, 0 to 10 V, 0 to Do you have a project that needs to be de- 20 mA or 4 to 20mA. signed and built but you do not have the • Can be used with a Modbus (COZ232M) or Modbus TCP (COZ100M) coordinator. time or expertise? Our engineers are able • Dimensions: 72 × 78 × 19 mm to provide a free quote to do the work. Price Each 1 5+

STW-050 AIZ100 Zigbee wireless analog input $299.95 less 10% transmitter

Page 6 Ocean Controls Catalogue 2012 OCEANDATA CONTROLS LOGGERS

KTA-224 Modbus IO Module KTA-226 Modbus 8 AI, 8 Relay Output Module Data Loggers

The KTA-224 and KTA-226 are RTU Modbus TagTemp Temperature Logger Slave IO modules for interfacing to any PLC or TagTemp Starter Pack PC using the Modbus protocol. It behaves as a Modbus Slave and Relays, Inputs and Outputs TagTemp is a compact water proof temperature data log- are controlled by writing to and reading from ger. Housed in an IP67 enclosure, TagTemp can be installed the Coils and Holding Registers. in harsh environments in different applications. It can be easily programmed and set via a handy infrared IrLINK-3 The user can save a set of output statuses to interface connected to a USB port under Windows LogChart be loaded when the unit is powered up or reset. A watchdog timer can II software or with a Palm compatible PDA IrDA interface be configured to reset the unit after a user-definable number of seconds under PalmOS. since the last communication from a Modbus master. The TagTemps are powered by an internal CR2032 lithium coin cell and can operate continuously for more than one General Features: year. When the battery has expired it can be replaced • 8 Relays Outputs (5A, 250VAC Contacts) with a new one. A high resolution (14 bit) ADC and large data memory • RS-485 or USB (virtual serial port) capacity (16k loggings) make the TagTemp the ideal product for accurate • Can be used as a USB to RS-485 converter • Watchdog Timer resets the unit when communication from the net- monitoring of temperature for long periods or fast sampling work master is lost The TagTemp starter pack contains two loggers and • Connections via Pluggable Screw Terminals IrLINK-3-USB Interface for configuring and download- • 1200-38400 Baud Modbus Slave Device ing data form the loggers. • Easily connect multiple units far apart by RS-485 Features: KTx-224 Features: • Enclosure: IP67, flame retardant, ABS+PC • Power Supply: 12 VDC / 24 VDC • Dimensions: 47 x 30 x 12 mm • 4 Opto-Isolated Inputs with counters • Temperature measurement accuracy: ±0.5 ºC • 3 Analog Inputs (10 bit) jumper-selectable for 0 to 5V or 0 to 20mA • Reading resolution: 14 bits or 16,384 levels • 4 Input Counters • Memory capacity: 16,000 loggings • Reading intervals: from 1 second to 18 hours KTx-226 Features: • Loggings can be programmed to start immediately, outset by the de- • Power Supply: 12 VDC / 24 VDC vice’s button, by date/hour or by a programmed setpoint or through • 8 Relay Outputs 5A 250VAC a PDA • 8 Analog Inputs (10 bit) 0 to 5V or 0 to 20mA Analog Inputs, Jumper • Loggings can be programmed to stop: at full memory; at some speci- Selectable fied date and hour, number of samples or never (circular memory) • Internal button to command start/stop logging Price Each 1 5+ Price Each 1 5+ KTA-224 Modbus IO module 12 VDC $135.00 less 10% LOG-010 TagTemp 16K Readings $79.00 less 10% KTB-224 Modbus IO module 24 VDC $135.00 less 10% LOG-011 TagTemp Starter Pack $199.00 less 10% KTA-226 Modbus 8 AI 8 relay module 12 VDC $135.00 less 10% powered LOG-002 IrLINK-3-USB infrared interface + soft- $109.00 less 10% ware KTB-226 Modbus 8 AI 8 relay module 24 VDC $135.00 less 10% powered LogBox AA Data Logger WS10 Webserver Data Acquisition System The LogBox-AA is an electronic data logger with two universal analog input channels. Input data is stored The WebServer WS10 is a device for data acquisi- in the logger internal memory, for later download to a tion, logging and transmission. It is capable PC for visualization and analysis in the form of tables of integrating instruments and sensors to the or graphs. The data is easily exported to spread- Internet, ethernet and wireless. The inputs for sheets. The LogChart-II is the software used to config- data acquisition can be either the built-in analog ure the logger, download and visualize data. and digital inputs or any inputs from the external equipments connected to the WS10 through the AA Logger features: RS-485 interface (Modbus protocol). Data transfer • 2 Universal Inputs: can be accomplished through the ethernet interface -- Pt100 RTD or modem (mobile or conventional) using ordinary -- J, K, T, E, N, R, S, B Thermocouples Internet resources, such as the internet browser, e-mail and TCP connec- -- 0 to 50 mV, 0 to 10 V tion. -- 0 to 20 mA , 4 to 20 mA Features: LogBox standard features: • 2 serial interfaces (RS-232, RS-485 or Modem) • Memory capacity: 32k readings If 2 channels are configured each channel has 16K readings. If 1 channels is configured it has the total • Internal memory for off-line data logging (16 bit CPU, with 512 kB memory of 32K readings RAM) • Interval between readings: 10 seconds to 18 hours • Ethernet 10/100BaseT interface. • External battery switch time: 0 to 10 s • Four inputs, configurable as: • Power: Internal 3.6V lithium battery (1/2 AA) -- Digital inputs for counting voltage pulses or dry contacts, with totaliser for flow measurements, or • Weather Proof, IP65 enclosure • Dimensions: 60 x 70 x 35mm. -- 0 to 5 V, 0 to 20 mA or 4 to 20 mA analog inputs with 10 bit resolution • Better than 0.3 % of input full scale range analog input accuracy Price Each 1 5+ • >1 MΩ input impedance for 0 to 5 V • 230 Ω load for current input LOG-001 LogBox AA 32K Readings $239.00 less 10% • 10 kΩ Pull-up resistor for digital inputs. (pulls to 5 V) • 2 Relay outputs LOG-0011 LogBox AA 64K Readings $269.00 less 10% • Suports TCP/IP, PPP (client and server), HTTP, FTP, SMTP, DHCP, Mod- LOG-002 IrLINK-3-USB infrared interface + log $109.00 less 10% bus TCP, Modbus RTU protocols chart software • Supports mobile wireless networks (GSM GPRS or CDMA 1XRTT) • Can SMS in case of alarm Prices are subject to change without notice, visit Price Each 1 5+

NWS-001 WS10 Webserver Data Acquisition System $1499.00 less 10% www.oceancontrols.com.au for the latest price.

Ocean Controls Catalogue 2012 Page 7 OCEANDATA CONTROLS LOGGERS

LogBox RHT Data Logger IrLINK-3-USB infrared interface + log chart software Logbox-RHT and LogBox-RHT-LCD are dual channel data IR-LINK III - (USB) Infra-Red Interface + Software, loggers with built-in temperature and relative humidity used to download configuration and upload recorded sensors. They use a high quality industrial grade humidity data from AA/DA Logger sensor for accurate and reliable operation in applications such as transportation, food and goods storage, process Logchart Software Configuration: auditing, pharmaceutical, HVAC and others. • Logging session title • Channel setup - name, type, limits, scaling In the LogBox-RHT-LCD the temperature and humidity • Start log options - immediatley or timed values are shown in the digital display. You can also • log rate check on the display the Minimum and maximum • logging options - stop when full, set number of recorded values. readings or roll-over

Price Each 1 5+ Features: LOG-002 IrLINK-3-USB infrared interface + log $109.00 less 10% • Temperature measurement: chart software -- Range: -40 to 80 °C. Resolution: 0.1°C • Humidity measurement: -- RH Range: 0 to 100 %RH. Resolution: 0.1 %RH FieldLogger Data Loggers 512k memory 240VAC -- Dew point range: -40° to 100 °C. Resolution 0.1 °C • Memory for 32,000 recordings in one channel or 16,000 recordings It has 8 configurable analog inputs that can read thermocouples, Pt100, for each channel Pt1000, voltage and current signals. It also has 2 relay outputs and 8 digital ports individually config- They can be easily programmed and set via a handy urable as inputs or outputs. infrared IR-LINK 3 interface connected to a USB port under Windows® software or with a PalmOS compat- Its RS-485 interface can operate as a Modbus RTU ible PDA IrDA interface. LogChart II software allows master or slave. As a master, it can read and log for logger configuration, recorded data retrieval, plot- up to 64 external channels. It has a 10/100 Mbps ting, historical analysis and it exports data to spread Ethernet interface that allows for access through a sheets. browser (HTTP), FTP (client and server), e-mails sending (SMTP), SNMP and Modbus TCP. FieldLogger has one USB interface to be connected to a computer (for configuration, monitor- Price Each 1 5+ ing and data download) and another USB port for plugging a flash driver for data retrieval. The 512k LOG-005 Logbox RHT 32K readings $269.00 less 10% logging basic memory is used to store data and it can be greatly expanded with an SD card. LOG-006 Logbox RHT 32K readings with LCD $289.00 less 10% An exclusive color HMI can be attached or re- LOG-004 IrLINK-3-RS-232 infrared interface $109.00 less 10% motely installed for local indication or configura- LOG-002 IrLINK-3-USB infrared interface + log $109.00 less 10% tion. A free user friendly configurator software package can access the chart software fieldlogger by Ethernet, USB or RS-485 and also provides means for online monitoring, logged data downloading and exporting to spread sheets and other formats. LogBox DA Logger

LogBox-DA is an electronic data logger with two input channels, one ana- Price Each 1 5+ log and one digital. Used widely for metering and counting pulses. NOD-001 FieldLogger Data Loggers 512K memory $949.00 less 10% Input data is stored in the logger internal 240VAC memory, for later download to a PC for visualization and analysis in the form of tables NOD-003 FieldLogger Data Loggers 512K memory $1099.00 less 10% 240VAC with HMI or graphs. The data is easily exported to spreadsheets. The LogChart-II is the software used to configure the logger, download and FieldLogger Data Logger Screen visualize data The HMI connects to the FieldLogger via a DE-9 connector. It can be con- DA Logger features: nected and disconnected while the FieldLogger is running. Both power and • Channel 1: RS-485 data is carried over the 9 pin connection and the connection can - NPN, PNP, Pulse or Dry Contact - be extended using a short DE-9 straight-through cable. -- Max. frequency: 4000 Hz or 20 Hz -- Maximum counting: 65,535 per period. HMI Features: • Channel 2: 0 to 20mA, 4 to 20mA, 0 to 50mV and 0 to 10VDC • Fits into the front of the FieldLogger, or can be run on a cable up to ~850 m LogBox standard features: • Colour TFT QVGA display with keypad • Memory capacity: 32k readings If 2 channels are configured each • Can be installed or removed while the Field- channel has 16K readings. If 1 channels is configured it has the total Logger is running memory of 32K readings • Shows channels as values or a live trend • Interval between readings: 10 seconds to 18 hours graph • External battery switch time: 0 to 10 s • Displays alarm statuses • Power: Internal 3.6V lithium battery (1/2 AA) • Allows configuration of some of the Field- • Weather Proof, IP65 enclosure Logger's basic communication • Dimensions: 60 x 70 x 35mm.

Price Each 1 5+ Price Each 1 5+

LOG-003 LogBox DA 32K Readings $239.00 less 10% NOD-005 FieldLogger Data Logger screen $169.00 less 10%

LOG-0031 LogBox DA IP65 64K Readings $259.00 less 10% LOG-0032 LogBox DA IP67 64K Readings $305.00 less 10% If an item is out of stock it will be automati- LOG-002 IrLINK-3-USB infrared interface + log $109.00 less 10% cally placed on back order. If multiple items chart software are ordered and some of them are expected at Ocean Controls within a few days, your order(s) Online ordering is available 24/7 at: will be held while the other items are awaited. www.oceancontrols.com.au

Page 8 Ocean Controls Catalogue 2012 OCEANDATA CONTROLS LOGGERS

Site-Log Programmable Datalogger Series SL-RS-232 Converter The Site-Log LFC-1 is an 7-channel, battery powered that There is an AUX port on the Site-Log Dataloggers for con- comes in four versions. You can pick from a stand alone necting to a serial communication device like a Modem or Voltage/Current, Thermistor, Thermocouple and 4 to 20 an Serial Device Server when the logger needs to be ac- mA Current Datalogger. The logger records up to 4Mb of cessed remotely. A SL-RS-232 converter cable is available data and stores it in non-volatile flash memory for later that terminates in a standard RS-232 connector. retrieval. Input current signals can be from sensors, transducers, transmitters or any other common voltage The SL-RS-232 Converter is used to convert Site-Log data sources. logger's TTL level communication signal to RS-232 standard. Featuring an aluminum enclosure and conformal coating PCB, the Site-Log Applications of SL-RS-232 Converter: data logger has excellent performance in the harshest industrial environ- • Computer only has COM port : If the computer does not have any USB port, or if you want to use COM port of the computer to commu- ment. Featuring a 16-bit ADC and programmable input range, the Site- nicate with a Site-Log data logger. Log data loggers are well suited to science and laboratory applications • Host device is not computer: If the host device is not a computer but where precise and accurate measurement is critical. Most models feature it has a RS-232 communications port. a battery life of up to 10 years. Features: Price Each 1 • Channel Alarms: Two editable alarm thresholds per channel MED-055 SL-RS-232 Converter $39.95 • Wide sampling rate (20 milliseconds to 12 hours) • Excitation Control: power control to external devices - only powers sensors to take a reading Venus GPS with SMA Connector Venus GPS Logger with SMA Connector Price Each 1 5+ This is a development board that uses the smallest, most powerful, and MED-001 Voltage Datalogger $549.00 less 10% most versatile GPS receiver we carry, the Venus. With two serial ports, MED-005 4 to 20 mA Current Datalogger $419.00 less 10% UART and SPI interfaces (please see the datasheets on how to implement the SPI interface), 28 mA operating current, and high sensitivity, this MED-010 Voltage/Current Datalogger $599.00 less 10% receiver seriously opens new doors for tracking. Module outputs the standard NMEA-0183 or SkyTraq Binary MED-015 Thermocouple Datalogger $599.00 less 10% sentences at a default rate of 4800bps (adjustable to MED-020 Thermistor Datalogger $499.00 less 10% 115200bps).

MED-050 SiteView Software $109.00 less 10% The Venus634LPx has improved sensitivity, an integrated LNA (with multipath detection and suppression), built-in RTC, and integrated single power supply making SiteView Software for Site-Log Dataloggers it very simple to use. In addition, the module supports data logging with an external SPI Flash! You can easily connect to the UART using our USB SiteView is a PC based application works with to Serial FT232 Breakout Board (ARD-010). Site-Log Series data loggers for downloading, configuration and data analysing and plotting. Features: Its user-friendly graphic interface plus powerful • 20 Hz Update rate functionalities fit both novice and advanced • -148 dBm cold start sensitivity users. The versatility of custom equation and • -165 dBm tracking sensitivity custom-line equation handle complicated meas- • 29 second cold start TTFF urement requirements. • 3.5 second TTFF with AGPS • 1 second hot start Features: • 2.5 m accuracy • Support USB, Serial port and Ethernet connections for easy local and • Multipath detection and suppression remote access • Jamming detection and mitigation • Fast communication speed up to 115200 bps makes downloading fast • SBAS (WAAS / EGNOS) support • Real-time view and chart recording replaces chart recording device • 67 mW full power navigation • Custom equation and custom-line equation solves scientific and laboratory algorithm difficulties • Works directly with active or passive antenna • Zoom in/zoom out, annotation/label of graph functions provide de- • Internal flash for optional 75K point data logging tailed view of data • Supports external SPI flash memory data logging • Multiple file loading allows easy data comparison. • Single 2.7 to 3.3V supply • Dynamic statistics provides detailed information of current zoomed view. Price Each 1 5+

Price Each 1 GPS-002 Venus GPS with SMA connector $59.95 less 10% MED-050 SiteView Software for Site-Log Dataloggers $109.00 GPS-003 Venus GPS Logger with SMA connector $59.95 less 10% ARD-010 FTDI 3.3 V Breakout Board $21.50 less 10% Site USB Device Server Site USB Device Server is an USB-over-Ethernet device GPS Evaluation Board server which enables work with the remote Site-Log data loggers over a local network or Internet as if they This is an evaluation board for various GPS modules that incorporates were connected directly to the local PC. many new features! Serial interface for USB over the FT232RL and a clas- sic RS-232 interface. Power is provided over USB or a DC barrel jack. A Features power switch, port selection, and serial isolation switches are available. • Remote Access:Communicate with data logger from any place where Ethernet/Internet is available. Note: If using the Lassen iQ module, a piece of tape is needed to cover • Multiple Access: Up to 20 clients can access same data logger simul- the exposed header under the module. taneously. • Multiple Data Loggers: Up to 25 data loggers can be connected to one Supported Modules: Site USB Device Server. • FV-M8 (formerly EB-85A)/EM406/EM408 • Password Protection for Security: Only authorized user can access and • Lassen iQ configure the data loggers. • Copernicus (requires female socket installation) • Dynamic IP Addressing: You do not need to assign IP address manually. After the device server is connected to the network, it takes the Features: IP address assigned by DHCP server on your network. • On board 5V regulation • Power Source to Data Logger: No worries about the low battery or • Status LED loss of data. The USB ports supply +5VDC to the data loggers. • 12mm Coin Cell backup battery holder

Price Each 1 Price Each 1 5+ MED-060 Site USB Device Server $199.00 GPS-004 GPS Evaluation Board $40.00 less 10%

Ocean Controls Catalogue 2012 Page 9 OCEANDATA CONTROLS LOGGERS

Antenna GPS 3V Magnetic Mount SMA Logomatic V2 Serial Data Logger Magnet mount antenna for GPS modules operating at 3V. Designed The Logomatic datalogger allows you to log serial data or its 8 analog for used with automobiles - the magnet will inputs to a microSD card.The Logomatic Version 2 hold the antenna in place at speeds greater incorporates the LPC2148 controller with USB, battery than 100mph. 5meter cable terminated with charging, and microSD support. standard male SMA connector. Features: This allows us to use the SparkFun LPC2148 USB • Gain 26dB bootloader for even easier and faster modification of • VSWR <2.0 the firmware. No programmer required! The Logo- • Voltage 3.3V ± 0.5V matic v2 uses a USB mass storage stack to appear • Current 12mA under any operating system as a flash drive.

Price Each 1 5+ Logs are created in FAT16 format on the microSD media and can be downloaded quickly over a USB connection by dragging and dropping the text GPS-020 Antenna GPS 3V Magnetic mount SMA $19.95 less 10% files from the device. The microSD card can also be removed and inserted into a card reader to download the logs.

GeoChron Blue - Field-hardened GPS Logger with Blue- Board comes with a JST connector to be powered from our line-up of LiPo tooth batteries or other power sources up to 7.5 VDC. If you choose to use LiPo batteries, the Logomatic v2 has a built-in charger to charge batteries off The GeoChron Blue is an enclosed, self contained, fully USB. configurable, GPS logger with Bluetooth® capabilites. Insert an SD card, turn on the power switch and the unit will start logging. Unit does not include SD card. Price Each 1 5+ Features: GPS-101 Logomatic V2 serial datalogger $75.00 less 10% • EM408 GPS receiver • Roving Networks RN-41 Bluetooth® Technology • High sensitivity SiRFIII chipset Logomatic V2 Serial DataLogger in Enclosure • Built-in 1000mAh Lithium Polymer • Run time: Ocean Controls designed a carrier board and - 7.4hours continuous enclosure for the Logomatic to make it simpler - 500hours sleep for people to connect to and use. All input/output • Selectable time between records connections are via screw terminals. • Selectable log sentences (RMC, GGA, GSA, and GSV) • Built-in charger (automotive compatible) Current shunts and internal jumpers allow the • DC charge input of 6 to 14V logging of industry-standard 4 to 20 mA current • Works with SD cards up to 2GB loop signals. A level shifter and DB-9 connector • Tri-color status LED provide a standard RS-232 connection for serial logging. Price Each 1 5+ The Logomatic datalogger records serial data and up to 8 analog readings to text files on a microSD card. A mini USB connection allows the device GPS-012 Geochron blue-GPS logger with bluetooth $141.50 less 10% to appear as a mass storage device on any operating system. Configura- tion is achieved by editing a text file on the SD card. The USB connection OpenLog also charges the internal lithium battery. OpenLog is an open source data logger. Simple to use, The included 900 mAh battery will run the logger for about 12 hours worst simple to change. We wanted to create a serial logger case, and much longer when logging only a few channels and at low duty. that just worked. Power this device up and send it serial External power (3.6 to 7.5 VDC) can be applied to run the unit without commands. ‘new’ will create a new file. ‘md’ makes a draining the battery. directory. ‘?’ brings up the list of commands. The Logomatic v2 ships with basic serial text and analog logging. Users The OpenLog firmware is open source and is based on Bill Greiman's can easily start with this firmware but are encouraged to modify the sdfatlib. OpenLog currently supports FAT16 and FAT32 microSD cards firmware for their specific requirements. It's a truly flexible logger. (tested up to 16GB!). OpenLog doesn’t do a lot, but it does log serial streams extremely well. Price Each 1 5+

KTA-265 Logomatic V2 Serial Data Loggers in $139.00 less 10% Price Each 1 5+ enclosure

LOG-501 OpenLog $27.00 less 10% KTB-265 Enclosure and carry board for Logomatic $59.95 less 10% V2 serial data loggers Jumper Wire - JST to Molex Jumper Wire - JST Black Red uLog - The Lil’est Logger

This is a simple two wire cable. Great for jumping from board to board. The uLog is a tiny analog logging device. Central to 2-pin JST connector on one end, 2-pin Molex 0.1” pitch polarized connec- the logger is an ATtiny24 mated with an AT45DB161D tor on the opposite end. Dimensions: 150mm/130mm length 16 Mbit flash IC. Sampling at 50 Hz, it’ll log 3 channels of 10-bit ADC for about 2 hours before the memory fills up. The power input is a 2-pin JST connector, which works well with our LiPo batteries, especially the small 100mAh LiPo, and it draws just 4mA with an ADXL320 attached. An ON/OFF switch is also included. Features: • AT45DB161D provides 16 Mbits of flash • Up to 3-channel ADC logging • Access to ATtiny24 SPI pins • Simple-to-use UART (38400 baud) interface for reading and erasing flash Price Each 1 5+ • Dimensions: 0.9" x 0.7” LOG-502 Jumper Wire -JST to Molex (150mm) $2.25 less 10% Price Each 1 5+ LOG-503 Jumper Wire -JST black red (130mm) $1.50 less 10% LOG-020 uLog - The Lil'est logger $23.93 less 10%

Page 10 Ocean Controls Catalogue 2012 OCEANCOMPUTER CONTROLS PARTS

EasyUSB Data Storage Device 7 Port USB Hub The EasyUSB gives your microcontroller access to 2MB High speed 7 port USB hub conforms to USB 2.0 specifica- that can be seen as a mass storage device in most oper- tion and will operate at speeds up to 480 Mbps. Power and ating systems. Now your microcontroller can easily read 7 port LED indication. Simple, flexible and highly scalable and write files in a file system that your computer can connectivity solution between your PC and USB compliant easily understand. devices, including cameras, scanners, printers and storage devices. Features: • FAT16 file system Features: • 2MB memory size • Measures only 100 × 58 × 15 mm • 3.0-5.2V input voltage • Supports up to 127 Hi-Speed Devices • Baud rate: 9600 to 921600 bps • 1.8 metre USB lead included • DIP8 package • 5 V mains plug pack included • Individual port overcurrent protection • Full compliance with USB 2.0/1.1/1.0 specification Price Each 1 5+

LOG-600 Easy USB Data storage Device $29.95 less 10% Price Each 1 5+

1GB and 2GB MicroSD card UHB-002 7 Port USB Hub $49.50 less 10% USB 3.0 Portable Card Reader 10 Port USB Hub We have 1 and 2 gig microSD media cards which are perfect for massive datalogging in a minute amount of Ten ports should be enough for anyone! For a little space. These microSD cards have a simple to use SPI while, anyway. The two position switch activates all interface allowing any micro to read and write data in a ports or only ports 7 to 10. This means you can turn very large 1 gigabyte storage array. Great for the Logomatic V2 off non-essential peripherals while maintaining power to others. LED indicators tell you which group is live. 5 The reader is great for use with mobile phones, Digital Cameras, PDAs. VDC, 2 A plug pack required for powered operation. Suits MMC, MMC4.0, RSMMC, RSMMC4.0, SD, Mini & Micro SD and T-Flash - all without adaptors. Win 2000, ME, XP, Mac. USB 2.0/1.1 Compliant. Features: • USB 2.0 • USB or mains powered • Key holes for wall mounting Price Each 1 5+ • Dimensions: 172 × 36 × 27 mm

MSD-001 1GB microSD card $19.95 less 10% Price Each 1 5+ MSD-002 2GB microSD card $16.95 less 10% UHB-003 10 Port USB Hub $54.50 less 10% TOL-200 USB 3.0 Portable card reader $15.95 less 10%

Sunix 4018T Dual Parallel Port Card Breakout Board for SD-MMC Cards This breakout board will allow you to breakout the SD/MMC Sunix’s 4018T offers 2 parallel ports for your PC. We socket to a standard. 1” 10-pin header. Perfect for bread- sell these primarily as a way to add extra axes of con- boarding and the likes. Board comes fully assembled and trol for CNC systems. Each port provides data transfer tested as shown. rate up to 2.7 MB/sec. The card supports 32-bit or 64-bit PCI bus with 3.3 V or 5 V signalling and is suitable for 64 bit systems as well. Plug-n-play technology Price Each 1 5+ makes installation a breeze. The card also supports the Re-Map to ISA address function. MSD-005 Breakout Board for SD-MMC Cards $19.95 less 10% Features: • Supports 32 bit and 64 bit PCI busses MicroSD USB Reader • Universal PCI interface • Data transfer speed up to 2.7MB/sec This is an awesome little microSD card USB reader. Your • IEEE1284 standard compatible uSD card slides into the inside of the USB connector, then • Re-map to ISA Address 278, 378 stick this into a USB port and the card’s contents will pop • Plug and Play up on your computer. • Ready for 64 bit systems

Price Each 1 5+ Price Each 1 5+ MSD-010 MicroSD USB reader $8.00 less 10% COV-301 Sunix 4018T Dual Parallel Port Card $39.95 less 10%

Computer Parts Sunix PCMCIA-2P 2 Parallel Port PCMCIA Card Sunix’s parallel PCMCIA-2P offers you two parallel UH284 4 Port USB Hub with Magnet Pads ports for your laptop. We sell these primarily as a way to add extra axes of control for CNC systems. The UH284 is ATEN’s compact and highly functional The ports have a data transfer rate up to 2.7 MB/ 4 port USB 2.0 hub series for the desktop or the sec. The card is plug-n-play and installation is a laptop. UH284 provides 4 additional USB 2.0 ports breeze with the included driver CD. for existing USB Systems, including an easy access port which is ideal for connecting a flash drive. Features: • Compatible with 32 bit CardBus slots Features: • Plug-n-Play installation • Built-in magnet pads and can be placed almost • Simple and easy way to connect devices to laptops anywhere • Speed up to 2.7 MB/sec • Provides 4 additional USB 2.0 ports to existing USB Systems • Windows utility to re-map each port's ISA address. • Four independent, fully functional, 480 Mbps, downstream ports • Fully compliant with the USB 2.0 specification Price Each • Per port overcurrent protection 1 5+ COV-310 Sunix PCMCIA-2P Parallel Port PCMCIA $95.00 less 10% Price Each 1 5+ Card UHB-001 UH284 4 Port USB Hub with Magnet Pads $22.50 less 10%

Ocean Controls Catalogue 2012 Page 11 OCEANCOMPUTER CONTROLS PARTS

Sunix 4079T Multi I/O PCI Controller Card 1.8m USB 2.0 Leads Sunix’s 4079T is a serial and parallel combo expansion card. It presents two male DB-9 RS-232 serial ports and a parallel port. The serial ports have a data transfer rate up to 921.6 kbps and the parallel ports offer speed up Type A male to type A male. to 2.7 MB/sec. Cable Length of 1.8m The card is ideal for projects like POS systems, automation assembly, ISDN terminals and more. The serial card is plug-n-play capable and installation is a breeze. The card comes with a windows utility that allows you to increas the size of the FIFO buffer to 128 kB. Type A male to type B male. Features: Cable Length of 1.8m • Support for 32 bit and 64 bit PCI busses • Universal PCI interface • 3.3 V & 5 V compatible • Supports Windows, Linux, DOS Type A male to 5 pin mini B. Cable Length of 1.8m Price Each 1 5+

COV-305 Sunix 4079T Multi I/O PCI Controller Card $69.00 less 10%

Price Each 1 4+ Serial Leads USB-001 USB2.0 Type A Male to Type A Male $9.05 less 10% DE-9 Male to DE-9 Female Serial / Modem Lead with straight through connections on all 9 pins. Lengths USB-002 USB2.0 Type A male to Type B Male $9.05 less 10% from 1.8 to 10 metres. USB-003 USB2.0 Type A Male to 5 pin mini male $9.05 less 10%

Price Each 1 4+ USB Extension Lead

CAB-002 D9 Male to D9 Female Serial/Modem Lead $8.35 less 10% USB1.1 Extend the length of your USB device by an 1.8m additional 5 metres (16 feet) or 10 meters using this Active USB Repeater Cable. Type ‘A’ Female to Type CAB-010 D9 Male to D9 Female Serial/Modem $11.45 less 10% ‘A’ Male Lead 3m

CAB-011 D9 Male to D9 Female Serial/Modem $13.45 less 10% Lead 5m Price Each 1 4+

CAB-012 D9 Male to D9 Female Serial/Modem Lead $22.00 less 10% COV-005 USB1.1 USB data 5 m extension lead $22.68 less 10% 10m COV-006 USB1.1 USB data 10 m extension lead $36.30 less 10%

1.8m Serial Modem Leads RJ45 Modular Patch Leads Standard 8P8C leads for Ethernet or any system using DB-25 Male to DB-25 Female. Cable RJ45 connectors. Length of 1.8m

DB-9 Female to DB-9 Female Null, Price Each 1 4+ allows DTE devices such as PC's to communicate with each other over a CAB-030 Modular patch leads 0.5m $3.36 less 10% serial RS-232 link. Cable Length of 1.8m CAB-033 Modular patch leads 1m $4.14 less 10%

CAB-036 Modular patch leads 2m $5.45 less 10%

CAB-039 Modular patch leads 3m $7.27 less 10% DB-25 Male to DB-25 Male. Cable Length of 1.8m CAB-042 Modular patch leads 5m $9.36 less 10% CAB-045 Modular patch leads 10m $13.95 less 10%

CAB-048 Crossover cat 5e cables 2m $6.23 less 10%

DB-25 Male to DB-9 Female Modem. CAB-051 Crossover cat 5e cables 5m $7.96 less 10% Cable Length of 1.8m RS-232 Gender Changers

DB-9 Male to DB-9 Male

Price Each 1 4+ Price Each 1 4+

CAB-001 DB-25 Male to DB-25 female 1.8m $7.59 less 10% CAB-101 D9 Female to D9 Female gender changer $5.00 less 10%

CAB-003 D9 Female to D9 Female Null 1.8m $8.32 less 10% CAB-102 D9 male to D9 male gender changer $5.00 less 10%

CAB-006 DB-25 Male to DB-25 Male 1.8m $7.59 less 10% CAB-103 D25 female to D25 female gender $6.09 less 10% changer CAB-007 DB-25 Male to DB-9 female modem 1.8m $8.77 less 10% CAB-104 D25 male to D25 male gender changer $5.27 less 10% CAB-008 D9 Male to D9 Male 1.8m $8.77 less 10% CAB-110 D25 female to D9 male gender changer $4.32 less 10%

CAB-111 D25 male to D9 female gender changer $4.32 less 10%

Page 12 Ocean Controls Catalogue 2012 OCEANCOMPONENTS CONTROLS

Configurable RJ45to DB-9/25 Adapters Latching Emergency Stop Switch with Key Release

An industrial grade emergency stop button that requires a key to reset. Specifications: • Suits Ø22 mm mounting hole • 1 pair of NC contacts rated to 600 VDC/VAC • Contact resistance: <50 mΩ • Insulation resistance: >100 MΩ Price Each 1 4+ • Contact Current: 10 A at 250 VAC or 125 VDC

CON-001 DB-9 female to RJ45 female $4.14 less 10% Price Each 1 5+

CON-002 DB-9 male to RJ45 female $4.14 less 10% HER-210 Latching Emergency Stop Switch with Key $9.95 less 10% CON-003 DB-25 female to RJ45 female $5.64 less 10% Release CON-004 DB-25 male to RJ45 female $6.50 less 10% Start-Stop Dual Push Button 1NO+1NC This momentary (spring return) dual pushbutton matches Components our other industrial pushbuttons. It features independant red and green sections but only requires a single mounting hole. The contact blocks can be swapped and stacked with Flush Industrial Pushbutton others in the series. This unit comes with one normally An industrial grade Flush Pushbutton with spring return. open and one normally closed set of contacts each rated to 10 A and 400 VAC. The module panel mounts with a ø22 Specifications: mm hole (like those in our 1, 2, 3 and 4 button enclosures.) • Suits Ø22 mm mounting hole • 1 NO and 1NC pair of contacts (except HER-206) • Contact resistance: <50 mΩ Price Each 1 5+ • Insulation resistance: >100 MΩ HER-230 HB2-EL8325 Start-Stop Dual Push button $12.95 less 10% • Contact Voltage: 600 VAC/VDC 1NO+1NC • Contact Current: 10 A at 250 VAC or 125 VDC

Price Each 1 5+ 2 Position Switch 1NO

HER-201 Black Flush Industrial pushbutton $9.95 less 10% Industrial rotary switch to match our industrial pushbuttons. Two positions with a satisfying click. Suits a ø22 mm hole HER-202 Green flush industrial pushbutton $9.95 less 10% (like those in our 1, 2, 3 and 4 button enclosures.) The HB2 series pushbuttons have interchangeable contact modules. HER-203 Red flush industrial pushbutton $9.95 less 10% This switch comes with a set of normally open contacts HER-204 Yellow flush industrial pushbutton $9.95 less 10% rated to 10 A and 400 VAC.

HER-205 Blue flush industrial pushbutton $9.95 less 10% Price Each 1 5+ HER-206 Red flush industrial pushbutton 1 NC $9.95 less 10% contacts only HER-235 HB2-ED21 2 Position Switch 1NO $9.95 less 10%

Red Emergency Stop Push Button 1NC NO/NC Contact Block Switches Red Emergency Stop Push Button Twist Release 1NC Normally Open (NO) and Normally Close (NC) Contact Block for our HB2 Switches. These contact blocks can be fitted to Industrial mushroom pushbutton for emergency stop or our Pushbuttons with the SKU number HER-2xx. interrupt applications. Push in, twist release to return to active position. (Latching action.)The mushroom head has a diameter of ø40 mm. Suits a ø22 mm hole (like those in our 1, 2, 3 and 4 button enclosures.) Price Each 1 5+

The pushbuttons have interchangeable contact modules. HER-298 NO Contact Block Switches $1.95 less 10% This pushbutton comes with a set of normally closed contacts rated to 10 A and 400 VAC. 1NC: Single set of normally closed HER-299 NC Contact Block Switches $1.95 less 10% contacts. Flange Indicator Pushbutton Price Each 1 5+ Industrial pushbutton with a flange that prevents activation of the button HER-208 HB2-EC42 Red Emergency Stop push $12.95 less 10% except by pressing directly against the face. Comes with both a 230VAC button 1NC Neon and 24VDC/AC LED bulb. 1NO: Single set of normally open contacts HER-209 HB2-EC542 Red Emergency Stop Push $12.95 less 10% LED Indicator that suits standard ø22 mm holes Button Twist Release 1NC Available in 5 different colors as shown:

Latching Emergency Stop Switch 23 mm DPDT Solder Tail Emergency Stop Switch Essential for installation of industrial or lab equipment. Latching switch with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the equipment Price Each 1 5+ can’t be operated until the switch is intentionally disen- gaged by rotating the actuator and releasing. It has two HER-220 HB2-EW3161 Flange indicator pushbutton $11.95 less 10% independent sets of contacts so the neutral and active may 1NO RED be both isolated. HER-221 HB2-EW3161 Flange indicator pushbutton $11.95 less 10% 1NO Green Alternate action latches in off position, rotating the spring loaded actuator clockwise allows circuit to HER-222 HB2-EW3161 Flange indicator pushbutton $11.95 less 10% reconnect. 1NO Yellow

HER-223 HB2-EW3161 Flange indicator pushbutton $11.95 less 10% Price Each 1 5+ 1NO White

LSW-020 Latching Emergency stop switch $9.95 less 10% HER-224 HB2-EW3161 Flange indicator pushbutton $11.95 less 10% 1NO Blue LSW-030 23 mm DPDT Solder Tail Emergency Stop $10.45 less 10%

Ocean Controls Catalogue 2012 Page 13 OCEANCOMPONENTS CONTROLS

LED Indicator Big Dome Push Button HB2-EVxx industrial comes with 24 VDC and 230 VAC LED indicator It’s the end of the world, and you need a button to press. lamps. Suits a ø22 mm hole (like those in our 1, 2, 3 and 4 button enclo- This is it a 60 mm diameter x 72 mm Height, dome il- sures.) luminated push button comes with a 12 VDC at 1.2 watt lamp, securing nut and a pre-installed long life horizontal Features: microswitch. • Matches our HB2/XB2 series industrial pushbuttons • BA9S bayonet lamp It has a mounting hole dimension of 24 mm. The button can also be adjusted to a low profile button by remov- Available in 5 different colors as shown: ing the middle ring. Included in the package are bulb, bulb holder and 3 terminals button actuator microswitch.

Price Each 1 5+ SFJ-011 Big dome push button $14.95 less 10% Price Each 1 5+ Thumb Joystick/Breakout board HER-330 HB2-EV63 Green LED Indicator $7.95 less 10% This is a joystick very similar to the ‘analog’ joysticks on HER-331 HB2-EV63 White LED Indicator $7.95 less 10% PS2 (PlayStation 2) controllers. Directional movements HER-332 HB2-EV63 Red LED Indicator $7.95 less 10% are simply two potentiometers - one for each axis. Pots are ~10 kΩ each. This joystick also has a select button HER-333 HB2-EV63 Orange LED Indicator $7.95 less 10% that is actuated when the joystick is pressed down. HER-334 HB2-EV63 Blue LED Indicator $7.95 less 10% This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mount- VFS-201/FS-2 Foot Switch ing holes in the corners. PCB only. The picture shows the joystick mounted on the Breakout board. Dimensions: 1” A simple to use Foot Switch x 1.25” Specifications: • SPDT micro-switch momentary • Contact Rating: 250 VAC at 10 A • Cord Material - PVC 0.75 mm², 3 Core Price Each 1 5+ • Actuation Force - 1.0 kg • Material - Polycarbonate SFJ-001 Thumb Joystick $6.00 less 10% SFJ-002 Breakout board for thumb joystick $4.25 less 10% Price Each 1 5+ HEN-001 VFS-201 foot switch $9.95 less 10% Game Controller Triggers (left/right pair) HEN-002 FS-2 Foot switch $9.95 less 10% Game Controller Trigger Breakout These triggers are the same ones found in modern game Concave Arcade Buttons controllers. They have a 10k potentiometer that gets adjusted by the spring-loaded trigger. It ranges from about This is a 35 mm concave momentary push button similar to the ones you 2k to 9k ohm. You get all the pieces for a left and right find on arcade games and 65 mm in height Simple screw in design. erP - pair. Keep in mind when putting these together that they fect for mashing. This button has a great tactile, ‘clicky’ feel. are mirror images. Features: This breakout board makes it easy to use the Game Con- • Durable nylon material troller Triggers. Simply snap the trigger into place on the • 3 Temrinal Microswitch rated to 3 A at 120 VAC appropriate side of the board and solder the potentiometer • Microswitch reliability tested to 10,000,000 cycles pins. Not only does the board provide a nice solid solder • Mounting hole: 28 mm (1⅛ inch) connection, but more options for mounting the trigger in your project!

Price Each 1 5+ Price Each 1

SFJ-020 Red Concave Arcade Button $4.95 less 10% SFJ-005 Game Controller Triggers (Left/Right Pair) $4.50

SFJ-021 Blue Concave ARcade Button $4.95 less 10% SFJ-006 Game Controller Trigger Breakout $2.00 SFJ-022 Yellow Concave Arcade Button $4.95 less 10%

SFJ-023 Black Concave Arcade Button $4.95 less 10% Long Handle Arcade Joystick

SFJ-024 White Concave Arcade Button $4.95 less 10% This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momen- SFJ-025 Green Concave Arcade Button $4.95 less 10% tary limit switches - one for each direction. Diagonal directions activate two switches. Convex Arcade Buttons This joystick also has a select button that is actuated when the red button is pressed down. The joystick is panel mount. It This is a M28 thread, 33 mm round momentary push comes with an optional disc that limits the movement to 4 directions. button similar to the ones you find on arcade games. Reading the movement of the joystick is as simple as setting up the mi- Simple screw in design. Perfect for mashing. Avail- crocontroller to read five switches. able in blue, green, pink and yellow Dimensions: Features: • Joystick height: 79 mm • 35.75 mm Diameter x 46 mm Height • Overall height: 190 mm • Mounting Hole Diameter: 27.3 mm • Base: 61.5 mm square • Panel cutout: 55 mm diam. hole and 4 × mounting holes Price Each 1 5+ • Microswitch Rating: 10A @ 250VAC SFJ-015 Blue Convex Arcade Button $2.95 less 10% Price Each 1 5+ SFJ-016 Green Convex Arcade Button $2.95 less 10% SFJ-004 Arcade Joystick - Long Handle $27.50 less 10% SFJ-017 Pink Convex Arcade Button $2.95 less 10%

SFJ-018 Yellow Convex Arcade button $2.95 less 10%

Page 14 Ocean Controls Catalogue 2012 OCEANCOMPONENTS CONTROLS

Short Handle Arcade Joystick 8 × 8 Dual Colour LED Matrix 4-way Pacman type arcade joystick. Heavy duty design gives this joystick LED matrix with bright red and bright green LEDs. This a great feel! medium-sized matrix has 64 Red/Green LEDs built into one common cathode housing. Features: • Uses 4 microswitches to detect on/off position • Unique handle design • Spring return to centre Price Each 1 5+ • Very rugged construction SFC-030 LED Matrix Dual Colour Medium Size $10.00 less 10% Dimensions: • Overall height: 101 mm • Base: 97 × 65 mm 10 Turn Potentiometer and Dial Scale • Joystick height: 60 mm 10 Turn wire potentiometer Price Each 1 5+ Features: SFJ-003 Arcade Joystick - Long Handle $22.95 less 10% • Series 3590 linear wire wound potentiometer. • 5 kΩ Total resistance • Up to 2 W power dissipation Blackberry Trackballer • 10 turn for high precision adjustment • ±5 % tolerance (total resistance) The four spindles on the trackball have a tiny circular • Package / Case Round - 22.23 mm × 18.60 mm magnet at the end. Each of these are paired with an • Solder lug terminations SMD hall effect sensor, which are used to measure up, • Actuator Diameter 6.30 mm; Length 20.62 mm down, left and right movements of the trackball. An • Slotted Shaft SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low Price Each 1 5+ when the switch is pressed. DIP-001 10 Turn 5 kΩ Potentiometer $27.50 less 10% Features: • Centre select button DIP-002 10 Turn 10 kΩ Potentiometer $27.50 less 10% • 360° direction DIP-010 15 Turn Dial Scale $22.95 less 10% • Hall effect sensors • Red, Blue, Green and White LED to light up the trackball. • Dimensions: 1.1 × 0.85 inches Panel Mount Circuit Breakers Panel mount circuit breakers with various current values. Price Each 1 5+ Specifications: SFJ-030 Blackberry Trackballer $17.93 less 10% • Hold Current: 100 % load indefinitely • Trip Current: Within 1 hour at 145 % load • Within 1 minute at 200 % load PS2 2" (5cm) Trackball • Max. Voltage: 250 VAC or 50 VDC This trackball communicates via PS/2 just like your computer mouse • Panel Cutout: Single hole mount Ø12 mm (okay, like your old computer mouse) and provides X and Y axis control • Dimensions: 36 × 31 × 15 mm as well as three separate button-clicks (activated by pulling the included spade connectors to ground). Price Each 1 5+

Features: CIR-001 3 A Circuit breaker panel mount $7.18 less 10% • PS/2 interface • 5 foot cable CIR-002 5 A Circuit breaker panel mount $7.18 less 10% • Left/Middle/Right-Click Button Leads CIR-003 10A Circuit Breaker panel mount $7.18 less 10% • Red and Green Status LEDs • 2" Clear Acrylic Ball CIR-004 15 A Circuit breaker panel mount $7.18 less 10%

Price Each 1 CIR-005 20 A Circuit breaker panel mount $7.18 less 10%

SFJ-031 PS2 2"(5cm) Trackball $16.00 CIR-006 25 A Circuit Breaker panel mount $7.18 less 10% CIR-007 30 A Circuit Breaker panel mount $7.18 less 10%

POL-1240 ShiftBrite CIR-008 35 A Circuit breaker panel mount $7.18 less 10% The ShiftBrite is a module by Macetech that integrates the Allegro A6281 3-channel constant current LED driv- Illuminated Panel Mount Circuit Breakers er with a large, high-brightness RGB LED. Using just three digital output pins and a simple protocol, your Combination illuminated switch and circuit breaker all in microcontroller can control a long chain of ShiftBrites. one compact package. Adjustable current for each color channel lets you Specifications: correct for slight differences in brightness. Over- • Hold Current: 100 % load indefinitely temperature shutdown protects the LED driver from • Trip Current: Within 1 hour at 135 % load overheating. The pins of the ShiftBrite are spaced 0.1" apart, making • Within 1 minute at 200 % load them compatible with breadboards and perfboards. The ShiftBrite comes • Max. Voltage: 250 VAC or 50 VDC in two configurations: one with male header pins and one without male • Panel Cutout: 13.35 × 28.5 mm header pins. • Dimensions: 33 × 32 × 15.5 mm Our premium jumper wires can be used to connect up mul- Price Each 1 5+ tiple modules. A 6 × 1 female connectors cable for Shift- Brites is also available for purchase to chain your ShiftBrite CIR-021 3 A Illuminated Panel Mount Circuit $7.23 less 10% together to achieve displays. Total cable length is 12" breaker

CIR-022 5 A Illuminated Panel Mount Circuit $7.23 less 10% Breaker

Price Each 1 5+ CIR-023 8 A Illuminated Panel Mount Circuit $7.23 less 10% Breaker POL-1240 ShiftBrite with headers $8.65 less 10% CIR-024 10 A Illuminated Panel Mount Circuit $7.23 less 10% POL-1241 ShiftBrite without headers $8.65 less 10% Breaker

POL-1239 6×1 F-F 12' Cable for shiftbrites $2.52 less 10% CIR-025 15 A Illumintaed Panel Mount Ciruit $7.23 less 10% Breaker

Ocean Controls Catalogue 2012 Page 15 OCEANCOMPONENTS CONTROLS

Thermal Printer/Thermal Printer paper Terminals PCB The thermal printer takes 2.25" (57 mm) wide thermal Horizontal Mount 90 Degree Pins, 5.08 mm Pitch. Rated 10 A at 300 V, paper with a max roll diameter of 1.5" (39 mm). PCB pin diameter 1.2 mm. Thermal paper is inexpensive and commonly found in most office supply stores. You may have to remove some paper from these rolls in order for it to fit into the printer. But, you can always use the excess paper in the printer, since you don't need to have a 'core' in the paper for it to work. The back panel has 2 3-pin connectors; one for power and one for serial communications. The thermal printer ships with default 19,200 bps baud rate. If you're using this printer in conjunction with an Arduino, you're going Price Each 1 5+ to need to connect it to the "Vin" pin and attach an ex- TRM-422 2 Way horizontal socket $0.75 less 10% ternal power supply, as the printer will draw more current than USB is capable of delivering. We've found that a 5 V plug pack works TRM-425 5 Way horizontal socket $1.90 less 10% best. TRM-426 6 Way horizontal socket $2.15 less 10%

Price Each 1 5+ TRM-429 12 Way horizontal socket $4.35 less 10%

SFA-010 Thermal Printer $54.45 less 10% TRM-432 2 Way 5.08 mm pluggable terminal block $2.10 less 10% SFA-011 Thermal Printer paper 34' $3.00 less 10% TRM-433 3 Way 5.08 mm pluggable terminal block $2.75 less 10%

72 and 107 mm DIN Rail PCB Mounting Sections Sleeve Bearing 12/24 VDC Fans Easily mount 72 or 107 mm tall PCBs on DIN rail. Various width sections allow for a range of PCB widths. Each end cap accommodates 10 mm of PCB width. Middle sections come in 11.2, 22.4 and 44.8 mm widths. For example, many of our small cards are 42.4 mm wide. We offer DIN rail mount versions using 2 base mounting clips, two end caps and one 22.4 mm section. (Total width: 10 + 10 + 22.4 = 42.4 mm) 12 VDC 24 VDC

Price Each 1 5+ 60 mm 80 mm 60mm 80 mmm

DRM-001 72 mm Tall series base mounting clip $1.77 less 10% Connection Flying Lead Flying Lead Flying Lead Flying Lead

DRM-002 72 mm tall series end cap $2.14 less 10% 0.57 m3/min 0.88 m3/ 0.61 m3/min 1.0 m3/ DRM-003 72 mm tall series 11.2 mm wide base $2.86 less 10% Air Flow section (20CFM) min(31CFM) (21.7CFM) min(36cCFM)

DRM-004 72 mm tall series 22.4 mm wide base $3.59 less 10% Input 1.6w N/A 2.6W 2.9W sectopn Power

DRM-005 72 mm tall series 44.8 mm wide base $4.32 less 10% Speed 3800 RPM 2300 RPM 4500 RPM 3000 RPM section Noise 27 dBA 26 dBA 34 dBA 34 dBA DRM-011 107 mm tall series base mounting clip $2.14 less 10% Material Thermoplastic Thermo- Thermoplastic Thermoplastic DRM-012 107 mm tall series end cap $2.50 less 10% plastic

DRM-013 107 mm tall series 11.2 mm wide base $3.18 less 10% Size 60 x 60 x 25 80 x 80 x 25 60 x 60 x 25 80 x 80 x 25 section mm mm mm mm

DRM-014 107 mm tall series 22.4 mm wide base $3.91 less 10% Bearing Sleeve Bear- Sleeve Bear- Sleeve Bear- Sleeve Beariing section Type ing ing ing

DRM-015 107 mm tall series 44.8 mm wide base $4.91 less 10% Blade type Plastic Plastic Plastic Plastic section

DIN Rail Mount 66 x 72mm Price Each 1 5+

DIN Rail mount which accepts a printed circuit board card FAN-001 60 mm Sleeve Bearing 12 VDC Fan $15.33 less 10% 66 x 72 mm FAN-002 80 mm Sleever bearing 12 VDC fan $15.23 less 10%

FAN-008 60 mm Sleeve bearing 24 VDC fan $15.23 less 10% Price Each 1 FAN-005 80 mm Sleeve bearing 24 VDC fan $15.23 less 10% DRM-102 DIN Rail mount 66 x 72 mm $11.95 We have a shop front located in Seaford. PCB Terminals You're welcome to drop by and speak to The grooves and ridges on the sides enable these terminal blocks to be ganged together in any combination. With our staff regarding the products of your wire protect terminals. Rated at 20 A at 300 interest or simply just to pick up orders. V AC. Cable size 0.5 to 2mm sq. We offer various payment methods including: Visa, MasterCard, EFTPOS and Cash. American Express is accepted via Price Each 1 5+ the website but not at the shop front. TRM-410 2 Way 5 mm PCB mount terminal block $0.75 less 10%

TRM-411 3 Way 5 mm PCB mount terminal block $0.95 less 10%

Page 16 Ocean Controls Catalogue 2012 OCEANCOMMUNICATIONS CONTROLS

Maglev Bearing 12/24 VDC Fans Communications

USB-i485 Isolated USB to RS-422/RS-485 Converter The USB-i485 converter has been incredibly popular since its release. Peo- ple have found them easy to use, reliable and robust. The module is a cost-effective way to convert RS-485 or RS-422 industrial buses to a USB interface. 12 VDC 24 VDC When connected to a PC USB port the USB to RS-485 80 mm 120 mm 80 mm 120 mm module is automatically detected and is installed as a native COM port. 1,500 VDC isolation between the Connec- Flying Lead Flying Lead Flying Lead Flying Lead USB port and RS-485/RS-422 protects the PC from tion spikes or possible misconnections in the communica- Air Flow 0.76m3/min 3.9m3/min 1.0m3/min 3.9m3/ tion bus. (27CFM) (138CFM) (37.5CFM) min(138CFM) The USB-i485 converter can be configured for four-wire (Full Duplex) Input RS-422 or two-wire (Half Duplex) RS-485 networks. When operating in 1.4 W 10 W 4.1 W 9.2 W Power two-wire RS-485 the data transfer control is automatically done by the converter. It supports Windows, Mac and Linux and has a transmission Speed 2350 RPM 3100 RPM 3200 RPM 3100 RPM rate from 300 bps to 1.0 Mbps. Noise 25 dBA 48 dBA 36dBA 48 dBA Features: Material Thermo- • USB V1.1 Plug and Play. Thermoplastic Thermoplastic Thermoplastic plastic • Appears as a serial (COM) port • Full Duplex RS-422, dual (combined) half duplex RS-485 or full du- Size 80 x 80 x 25 120 x 120x 80 x 80 x 25 120 x 120 x plex RS-485 interface mm 25.4 mm mm 38 mm • Automatic flow control for RS-485 Half Duplex. • 120 Ω internal resistors termination enabled by jumpers. Bearing Maglev Maglev Maglev Maglev • Data transmission and reception LED indicators Type

Blade Type Plastic Plastic Plastic Plastic Price Each 1 5+

Price Each 1 5+ COV-001 USB-i485 isolated USB to RS-422/RS-485 $129.00 less 10% converter FAN-003 80 mm MagLev Bearing 12 VDC fan $17.18 less 10% FAN-004 120 mm MagLev bearing 12 VDC fan $27.27 less 10% ATEN UC-232A USB to RS-232 Converter FAN-006 80 mm MagLev Bearing 24 VDC fan $19.05 less 10% The UC232A from ATEN is a USB to serial port converter. It provides PCs, notebook PCs and handheld computing devices using USB an external PnP FAN-007 120 mm MagLev bearing 24 VDC fan $27.27 less 10% RS-232 port. Features: 80 mm and 120 mm Finger Guards • Support the RS-232 Serial interface. • Support full handshake mode • Full compliance with the USB Specification 1.1. • Up to 230 kbps data transfer rate. • Based on the widely popular PL-2303 chipset • Windows, Mac and Linux drivers available Package Contents: • 1 × UC-232A • 1 × Driver Disk • 1 × User Manual

Price Each 1 5+

Price Each 1 5+ COV-013 USB to serial converter $29.00 less 10% FAN-020 80 mm Metal guard $1.65 less 10%

FAN-021 120 mm Metal guard $2.30 less 10% ATEN UC2322 USB to 2 Port and 4 Port RS-232 Converter

FAN-022 80 mm Plastic guard with foam filter $4.29 less 10% The UC2322 from ATEN is a USB to 2 Port or 4 Port serial RS-232 converter. It provides PCs, notebook PCs and handheld computing devices FAN-023 120 mm Plastic guard with foam filter $5.15 less 10% using USB an external PnP RS-232 port. The converter is based on the MosChip Semiconductor MSC7840 chipset. The converter comes with a CD with If you are dissatisfied with our goods you drivers for Windows 2000 through to 7, 32 bit and 64 may return them within 14 days of the bit. Linux kernels 2.6.19 and later have the driver built in. dispatch date. Contact us for an authori- Features: sation and we will refund your purchase, • Fully compliant with USB 1.1; USB 2.0 compatible • Supports RS-232 serial interface less shipping cost. A restocking fees • Supports automatic handshake mode • Up to 115.2 Kbps data transfer rate for each serial port may apply for specially ordered goods. • Supports remote wake up and power management • Dual data buffers for each upstream and downstream data transfer • Windows, Mac and Linux drivers available All returned goods MUST be in AS NEW condition including ALL PACKAGING and Price Each 1 5+ DOCUMENTATION / MANUALS etc. Plus COV-014 USB to 2 port serial RS-232 converter $79.00 less 10% an RMA form needs to be attached to the COV-015 USB to 4 port serial RS-232 converter $109.00 less 10% return goods. RMA is downloadable from our website in the "Ordering Info" tab.

Ocean Controls Catalogue 2012 Page 17 OCEANCOMMUNICATIONS CONTROLS

USB485C Non-Isolated USB to RS-422/485 Converter TLC-422 Port-Powered RS-232 to RS-422 Converter The USB485C is a non-isolated USB to RS-485/422 The 3onedata TLC-422 is a small plug-in converter industrial intelligent converter. It is a good economi- that converts the RS-232 TXD and RXD signals to cal solution for the communication between USB and RS-422 signals. RS-485/422. It is powered from the handshake lines on the Features: RS-232 serial port so no external power source is • No power supply needed, plug and play needed. No configuration or programming is neces- • Adopt DIP switch setup, random switch RS-485/ sary. Suits serial data up to 115200 bps. RS-422 interface • Transmit distance reach up to 1800 M at the rate of 115200 bps. • Automatic send data control, auto distinguish and sense direction Price Each 1 5+ adopt data transfer • Auto sense serial signal rate, zero delay automatic transmit TOD-006 TLC-422 Port-powered RS-232 to RS-422 $29.00 less 10% converter Price Each 1 5+ Pololu USB To TTL Serial Module TOD-100 USB485C USB to RS-485 converter $69.95 less 10% The Pololu USB-to-serial adapter is great for connecting microcontroller projects to a personal computer. The USB to RS-485 Converter adapter uses 3.3 V signal levels so you can connect it directly to any microcontroller running at up to 5 V. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB The USB adapter’s drivers make it look like a standard stream to RS-485. serial port to the operating system, allowing you to connect to all of your existing software,through a USB port. The adapter is The SP3485 is a half-duplex transceiver, so it can only compatible with USB 2.0 standards and allows baud rates of up to 921.6 communicate one way at a time, but it can reach trans- kbps. Support for Windows, Mac and Linux. mission speeds of up to 10 Mbps. Uses a mini B USB connector and can only be operated via USB. Price Each 1 5+ Features: • RX, TX, and RTS LED indicators POL-391 Pololu USB to TTL serial Module $33.40 less 10% • RS-485 input/output broken out to RJ-45 connector, 3.5 mm screw terminal, and 0.1" pitch header • -7V to +12V Common-Mode Input Voltage Range1 × User Manual SW485SGI/C Isolated RS-232 to RS-422/RS-485 Convert- er and RS-485/422 Repeater

Price Each 1 SW485SGI/C is our top-of-the-line RS-232 to RS- 485/422 converter with both isolation and surge COV-202 USB to RS-485 Converter $20.00 protection. Isolated power and ground generated internally. LEDs indicate data traffic. The RS-422/485 side and the RS-232 side is powered by an external SW485C Non-Isolated Port-Powered RS-232 to RS- power supply. 485/422 Converter SW485WA Isolated Port-powered RS-232 to RS-422/RS-485 The SW485GI/C can also act as a RS-485/RS-422 to RS-485/RS-422 repeater. This allows you to extend the length of your converter RS-485 or RS-422 transmission lines or isolate segments of the line from SW485C/SW485WA are industrial grade. It can other sections convert any standard full duplex RS-232C port to any Features: two-wire balanced half duplex RS-485 port or four- • DIN-rail mount, terminal block, 9 to 36 VDC external power, 3,000 V wire balanced full duplex RS-422 port. isolation • Transmit distance reach up to 1,800 m at the rate of 9.6 kbps Both have DE-9 female connector on the RS-232 side • DB-9 connector for RS-232 and a DE-9 male connector with 5 way screw terminal adapter on the RS- • Dimensions 100 × 69 × 22 mm 485/RS-422 side. Features: • Automatic send data control, auto distinguish and sense direction Price Each 1 5+ adopt data transfer TOD-002 Isolated Serial Converter and RS-485/422 $139.00 less 10% • Auto sense serial signal rate, zero delay automatic transmit Repeater

Price Each 1 5+ 485P Isolated RS-232 to RS-422/RS-485 Converter TOD-007 Non-isolated port-powered RS-232 to $37.50 less 10% RS-485/422 The 485P is a high performance RS-232 to RS-485/422 converter. The product features both opto-electrical isolation of more than 2.5 kV and TOD-008 Isolated Port-powered RS-232 to RS-422/ $52.50 less 10% internal power isolation. RS-485 It has 1,500 W surge protection on its data lines. It features automatic data rate and direction control. TLC-485 Non-Isolated Port-Powered RS-232 to RS-485 The RS-485/422 signals come out a DB-9 male and Converter an RJ45 socket. Power can be provided from the handshake lines or a 9 to 15 VDC plug pack. The 3onedata TLC-485 serial converter is an easy- to-use plug in module for converting RS-485 serial Features: to RS-232 serial. • Transmit distance up to 1,800 m at the rate of 115.2 kbps It draws power from the RS-232 port and auto- • Automatic sensing of serial data rate, zero delay automatic transmit matically sets the data direction to convert the • Point to point or multi-point, 2 line half duplex, 4 line full duplex full duplex RS-232 to the half duplex RS-485. It • Baud rate 300 to 115,200 bps, automatic test signal rate automatically senses the baudrate and is suitable for serial data up to 115.2 kbps. Price Each 1 5+

TOD-001 485P Isolated RS-232 to RS-422/RS-485 $75.00 less 10% Price Each 1 5+ converter

TOD-004 TLC-485 non-isolated port-powered RS- $29.00 less 10% 232 to RS-485

Page 18 Ocean Controls Catalogue 2012 OCEANCOMMUNICATIONS CONTROLS

CVR-10 Non-Isolated Port-Powered RS-232 to RS-485 RS-232/RS-422/RS-485, 10/100 Mb Ethernet Serial Serv- Converter er This simple RS-232 to RS-485 non isolated converter can be powered The Industrial Serial Server is a cost effective from the RS-232 handshake lines or a 5 VDC supply. gateway for Ethernet (TCP/IP) and serial signal com- LED Indication munications. It allows almost any serial device to be • Transmission Distance: connected to a new or existing Ethernet network. -- 9600 bps: 200 m -- 19200 bps: 200 m By encapsulating serial data and transporting it over -- 38400 bps: 200 m Ethernet, SE5001/SE5002 offers full-duplex and -- 57600 bps: 150 m bi-directional data that is transmission transparent -- 115200 bps:120 m between the serial port and the Ethernet network. • Power Supply: Powered from RS-232 Lines or 5 VDC Features: • Serial Port: Screw Terminals RS-485 x 1, • Power Input: 5 VDC or 9 to 30 VDC • D9 Female RS-232 x 1 • EMC Approval • Software Price Each 1 5+ -- Configuration: Web Page / Telnet / Serial console / Windows utility ALT-010 CVR-10 non-isolated port-powered RS- $59.95 less 10% -- Virtual Com: Windows port redirection 232 to RS-485 software -- Support Protocol: ICMP, TCP(UDP) / IP, DHCP client, SNMP, HTTP Model 232I RS-232 Isolator • Interface - RS-232/422/485 software selectable The Model 232I is a RS-232 signal isolator. It protects - - 1-port/ 2 independent serial ports PCs, PLCs and serial devices from transients the serial - -- Baud Rate: 1200 bps ~ 230 Kbps lines. -- Parity: None, Odd, Even, Mark, Space This product supports transmission rates as high as 57,600 bps. The isolator is port-powered and features Price Each 1 5+ 5 kV optical-electric isolation.Transmission distance at 9,600 bps is 10 m with 600 W surge protection. ATO-101 SE5001, 1 Port, RS-232/RS-422/RS-485, $129.00 less 10% 10/100 Mb Ethernet Serial Server

Price Each 1 5+ ATO-105 SE5002 2 Ports, RS-232/RS-422/RS-485, $189.00 less 10% 10/100 Mb Ethernet Serial Server TOD-003 Model 2321 RS-232 Isolator $35.00 less 10%

GW51C-MAXI-WDT RS-232/RS-422/RS-485 10/100 Mb RS-232 To TTL Module Ethernet Serial Server This module will allow a microcontroller to communi- The Industrial Serial Server GW51C-MAXI-WDT is a cost effective gateway cate with a computer. It's powered from the target ap- for Ethernet (TCP/IP) and serial signal communications. It allows almost plication and can run at any voltage! Power the board any serial device to be connected to a new or existing Ethernet network. at 5 V and the unit will convert RS-232 to 5 V TTL. Power the board at 2.8 V and the board will convert By encapsulating serial data and transporting it over Ethernet, GW51C- RS-232 to 2.8 V CMOS TTL. Includes two indicator LEDs MAXI-WDT offers full-duplex and bi-directional for TX and RX. Runs from 300 bps up to 115,200 bps. data that is transmission transparent between Unit comes fully assembled and tested as shown. You the serial port and the Ethernet network. can either solder a 4-pin header or individual wires. 32 × 30 mm. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Ter- minals, Electronic Kanbans, Shop Floor Control Price Each 1 5+ Systems, and Pick-to-Light Systems. COV-201 RS-232 to TTL Module $14.95 less 10% Features: • Power Input: 5 VDC or 9 to 30 VDC EH2308 Unmanaged 8 Port Ethernet Switch • EMC Approval • Software The EH2308 is an Industrial Ethernet Switch with 8 -- Configuration: Web Page / Telnet / Serial console / Windows 10/100 BaseT(X) ports that provides a reliable and utility economical solution for your industrial Ethernet con- -- Virtual Com: Windows and Linux port redirection software nections. -- Support Protocol: ICMP, TCP(UDP) / IP, DHCP client, SNMP, HTTP • Interface The EH2308 protects itself from receiving too many -- RS-232/RS-422/RS-485 software selectable broadcast packets. During normal use, broadcast -- 1 port packets will be forwarded to all ports except the -- Baud Rate: 1200 bps ~ 230 Kbps source port. -- Parity: Odd, Even, Mask, Space However, it will discard broadcast or multicast packets if the number of those packets exceeds a threshold in a preset period of time. When the Price Each 1 5+ preset period expires (about 800ms), it will then resume receiving broad- ATO-110 GW51C-MAXI-WDT Ethernet Serial Server $199.00 less 10% cast or multicast packets until the threshold is reached again. EH2308 provides two redundant power inputs that can be connected simultaneously to wide-range DC power sources. If one of the power inputs Isolated converters are more advanta- failure, the other live source acts as a backup to provide the EH2308 power needs automatically. It requires 9 to 48 V input. geous than the non-isolated converters Features: because they have a high frequency trans- • Interface -- RJ45 Ports: 10/100 BaseT(X) auto negotiation speed full/Half- former that provide a barrier. This bar- duplex mode, and auto MDI/MDI-X connection -- LED Indicators: Power, 10/100 M rier separates Vin and Vout and can with- • Passed the Shock, Drop, Vibration tests • CE, FCC and UL approval. stand up to several thousand of volts.

Price Each 1 5+

ATO-005 EH230 Unmanaged 8 Port Ethernet Switch $139.00 less 10%

Ocean Controls Catalogue 2012 Page 19 OCEANCOMMUNICATIONS CONTROLS

MB5001C 1-port Modbus/ModbusTCP Gateway Model FL45 RJ45 Ethernet Surge Protector The Atop MB5001C series provides an interface between Modbus serial These surge protectors suit RJ45 Ethernet networks. Low capacitance devices and hosts running Modbus/TCP on Ethernet networks. These low makes them suitable for both 10Base-T and 100Base-T(X). They shunt power, compact devices are housed in a metal casing and have the option dangerous voltage transients to ground, protecting equipment in the of photo-couple isolation, making them ideal for interfacing industrial event of power surges such as nearby lighting strike. Surge protectors on equipment such as PLCs, HMIs, various sensors and measuring instru- pins 1, 2, 3 and 6 (the Ethernet signal pins) BNC Connectors ments. Features: User friendly setup via a web based UI ensures simple integration even • IEEE 1000-4-5 and ITU-TK20 & K21 Standards for complex configurations.The MB5001C series compliant supports the three most commonly used serial com- • <1 ns response time munication interfaces, RS-232, RS-422 and RS-485. • <0.5 dB signal loss through the surge protector It also provides a web-based configuration UI, so the users can select the serial interface easily. Price Each 1 5+

Features: TOD-022 Model FL45 RJ45 Ethernet Surge Protector $45.00 less 10% • 15 KV ESD protection for serial signals(MB5001C-Sis only) • 10/100 Mbps Fast Ethernet Full Duplex Auto Negotiation RS-232/485/422 to Optical Fibre Converters • Monitor, Manage and Control Industrial Field Devices Remotely • Upgradeable firmware from remote-PC via Ethernet The Model277 series converters are equipped with a multiple interface circuit that can handle RS-232, RS-485 or RS-485 serial. Price Each 1 5+ The Model277 Series incorporates a method for automatically detecting the serial signal baud rate by hardware. No configuration is required. The ATO-161 MB5001C 1-port Modbus/ModbusTCP $189.00 less 10% Gateway converters will automatically adapt to changing baudrates with zero delay. 0 to 500 kbps serial baudrate. In addition to surge protection, using these converters DB-9 To 5 Screw Terminal Board protects equipment from ground shorts or surges due to DB-9 to 5 Screw Terminal Board. Suitable for Serial to lightning strike that can affect long distance wired net- Ethernet Gateways SE5001 and SE5002 for RS-422/485 works. It requires 9 to 36 VDC input, consuming 2 W, with connections a 1310 nm working wavelength. Features: • Extends serial networks up to 2 km using multi-mode fibre • Extends serial networks up to 20 km using single-mode fibre • SC connector for multi-mode fibre version (TOD-060) Price Each 1 5+ • ST connector for single-mode fibre version (TOD-061) • 1,500 W surge protection on serial lines ATO-148 DB-9 to 5 Screw Terminal Board $14.95 less 10% • 15 kV ESD protection

DIN Rail Mounting Clips (Pair) Price Each 1 5+ Pair of plastic DIN rail mounting clips with screws to TOD-060 Pair of Serial to multi-mode conv, SC $289.00 less 10% suit. These clips match our TOD-xxx range of convert- connectors ers and serial servers but can be used for just about TOD-061 Pair of serial to single-mode conv, ST $329.00 less 10% anything. Each clip has three shafts for screws. connectors Specifications • Length: 10 mm, Height: 19 mm, Width: 43 mm 10/100M Ethernet to Optical Fibre Converters • Inflammability class (UL 94): V2 The 3onedata Model 1100S-SC-20KM Ethernet Fiber converter provides a cost effective plug-and-play solution for long-range, 20 km tranmis- Price Each 1 5+ sion distance, 10 Base-T or 100 Base-TX Ethernet extensions and added TOD-200 DIN rail mounting clips (pair) $3.95 less 10% benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks.

Model FL485 RS-485 Surge Protector These converters are ultra-miniature in size (160.5 × 110 × 30 mm) and feature a shielded RJ45 Ethernet These surge protectors suit 2-wire RS-485 networks. jack and SC style fiber-optic connections. Built-in They shunt dangerous voltage transients to ground, auto-sensing capabilities enable full or half-duplex protecting equipment in the event of power surges Ethernet operation with no configuration required! such as nearby lighting strike. Powered at 5 VDC power and includes plug pack adapter Meets IEEE802.3, IEEE802.3u 10 Base-T, Features: 100 Base-TX and 100 Base-FX standards • IEEE 1000-4-5 and ITU-TK20 & K21 Standards compliant • <1 ns response time • <0.5 dB signal loss through the surge protector Price Each 1 5+

Price Each 1 5+ TOD-080 Ethernet to optical fibre, single mode $129.00 less 10% (Double fibre) SC connectors TOD-020 Model FL485 RS-485 Surge Protector $37.50 less 10% TOD-082 Ethernet to optical fibre, single mode $149.00 less 10% (Single Fibre) SC connectors

Model FLBNC - BNC Surge Protector TOD-084 Ethernet to optical fibre, multi mode, dual $119.00 less 10% Fibre, ST connectors These surge protectors suit BNC co-axial signals including 10 Base-2 Ethernet and video. They shunt dangerous voltage transients to ground, protecting equipment in the event of power surges such as nearby lighting strike. BNC Connectors Prices shown in the catalogue may not be up Features: to date. For the latest prices of your product • IEEE 1000-4-5 and ITU-TK20 & K21 Standards compliant visit our website at www.oceancontrols.com.au • <10 ns response time • <0.5 dB signal loss through the surge protector

Price Each 1 5+

TOD-021 Model FLBNC-BNC Surge Protector $45.00 less 10%

Page 20 Ocean Controls Catalogue 2012 OCEANCOMMUNICATIONS CONTROLS

Bluetooth Modem nRF24L01+ Transceiver Module with Chip Antenna The BlueSMiRF is a Bluetooth wireless serial cable replacement. These This module uses the newest 2.4 GHz transceiver from modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to Nordic Semiconductor, the nRF24L01+. This transceiver 115,200 bps can be passed seamlessly from your computer to your tar- IC operates in the 2.4 GHz band and has many features get. We’ve even tested these units successfully over open air at 100 m! including pipelines, buffers, and an auto-retransmit feature - very nice! The remote unit can be powered from 3.3 V up to 6 V for easy battery attachment. All signal pins on the The transceiver is aimed at two types of application: PC remote unit are 3 to 6 V tolerant. No level shifting is peripherals and ultra low power applications such as remote controls and required. The BlueSMiRF includes hardware flow control sensors. For PC peripherals such as wireless mice, keyboards and media (CTS and RTS) and uses a compact ceramic antenna. center remotes it enables high performance and long battery life at a low solution cost. For sensor applications the ultra low power consumption and advanced power management enables battery lifetimes up to several Price Each 1 5+ years on a coin cell battery. WIR-010 Bluetooth Modem $64.95 less 10% The module includes a 3.3 V regulator, crystal oscillator, chip antenna and matching components. It is hooked up to a host system via a 5 V - tolerant SPI interface. An interrupt pin allows the transceiver to signal 433 MHz Long Range Radio Modems the host microcontroller on configurable events, eliminating the need for a These small 433 MHz long range radio modems use a seamless serial in- polling-base architecture. terface - whatever serial character enters the TX pin at 9600 bps (UM96) or 1200 bps (UM12) shows up on the other unit’s RX pin. All buffering and Price Each 1 5+ error detection is handled internally. This unit can be attached to TTL level serial (for microcontrollers) or directly to RS-232 for incredibly simple se- SFR-300 nRF24L01+ Transceiver module with chip $22.00 less 10% rial cable replacement! 3.3 to 5.5 V powered. GFSK Modulation antenna Features: • Over 500 m range (WIR-001) at 9,600 bps RFM22-S2 SMD Wireless Transceiver • Over 1,000 m range (WIR-002) at 1,200 bps • 8 Channels jumper selectable (4 can be used in The RFM22 is a low-cost 430 to 480 MHz transciever module Australia) with a full range of packet handling and error correction • Low power : 30 mA RX, 40 mA TX, 20 µA Sleep features. • Antenna included with each The module has adjustable output power up to +17 dB and a receive sensitivity of -103 dB. The module comes in a 16- pin, 16 x 16 mm, SMD package, with pins spaced by 2 mm. Price Each 1 5+ SPI interface. WIR-001 UM96 9,600 bps, 500 m long range radio $54.95 less 10% modem Price Each 1 5+ WIR-002 UM12 1,200 bps, 1,000 m long range $59.95 less 10% radio modem SFR-250 RFM22-S2 SMD Wireless Trasceiver $13.00 less 10%

UM96 and UM12 Modem Adapter MiRF v2 2.4 GHz Transceiver Module with Rubber Duck The KTA-232 is an easy to use adapter for the UM96 Antenna and UM12 wireless modems. Just attach the modem, a The MiRF v2 is the latest in RF modules. This module uses the new- power supply (8 to 30 VDC) and a standard male to fe- est 2.4 GHz transceiver from Nordic Semiconductor, the nRF24L01. This male DB-9 serial cable and you will be up and running transceiver IC operates in the 2.4 GHz band and in no time. Jumpers select DCE or DTE modes has many new features! This also board features a Features: reverse polarized SMA connector for maximum RF • Suits UM96 (WIR-001) and UM12 (WIR-002) range. Comes with 2.4 GHz Duck Antenna wait 2.2 modems dBi of gain. Perfect for prototyping with our RF ICs. • Regulates 8 to 30 V DC down to 5 V for the radio modem 50 Ω impedance. • Accepts UM12 and UM96 modems • DB-9 Female connector Features: • Jumpers select DCE or DTE modes • On-board 3.3 V LDO Regulator (3.3 to 7 V supply allowed) • 80 m Range at 1000 kbps. 2 Mbit Data Rate • Auto Acknowledge, Auto Re-Trasmit, Multiceiver 6 Data pipe Price Each 1 5+ • 32 Byte seperate TX and RX FIFOs. 5 V tolerant input pins • Software selectable channel from 2400 to 2525 MHz (125 Selectable KTA-232 Adapter for UM96 and UM12 Radio $20.00 less 10% channels). Modems • Minimum number of external components

Serial UHF Transmitter and Receiver Price Each 1 5+

This transmitter and receiver pair is good for data rates up WIR-006 MIRF v2 2.4 GHz transceiver module with $36.95 less 10% to 4,800 bps and distance up to 160 m. The receiver is op- antenna erated at 5 V and the transmitter operates from 2 to 12 V. The higher the voltage, the greater the range. This is an ASK transmitter module with an output of up to 8 mW Breakout Board for Si4703 FM Tuner depending on power supply voltage. This is a breakout board for the Silicon Laboratories Si4703 FM tuner chip. The transmitter is based on SAW resonator and accepts a Beyond being a simple FM radio, the Si4703 is also capa- simple on/off digital input. This receiver has a sensitivity of 3 µV. It oper- ble of detecting and processing both Radio Data Service ates from 4.5 to 5.5 VDC and has digital output. The typical sensitivity is (RDS) and Radio Broadcast Data Service (RBDS) infor- -103 dbm and the typical current consumption is 3.5 mA for 5 V operation mation. The Si4703 even does a very good job of filtering voltage. and carrier detection. It also enables data such as the station ID and song name to be displayed to the user. By plugging headphones into the 3.5 mm audio jack, you effectively use Price Each 1 5+ the cable in your headphones as an antenna! Therefore, this board does WIR-031 Serial UHF Transmitter $5.00 less 10% not require an external antenna if using headphones or a 3.5 mm audio cable longer than 1 m and will be able to power the XBee with 5 V. WIR-032 Serial UHF Receiver $6.50 less 10%

Price Each 1 5+ SFR-260 Breakout board for Si4703 FM tuner $22.95 less 10%

Ocean Controls Catalogue 2012 Page 21 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

XBee Series 1 & 2.5 Wire Antenna XBee Explorer Serial New 2.4GHz XBee XB24-BWIT-004 module from Digi. Series 2.5 improves This is a simple to use, RS-232 to serial base unit for the on the power output and data protocol. These modules take the 802.15.4 XBee line. This unit works with all XBee modules including stack (the basis for Zigbee) and wrap it into a simple to use serial com- the Series 1 and Series 2.5, standard and Pro version. Plug mand set. They allow a very reliable and simple communication between the unit into the XBee Explorer, attach a cable, and you will microcontrollers, computers, systems, really anything with a serial port! have direct access to the serial and programming pins on Point to point and multi-point networks are supported. Series 1 modules the XBee unit. The board also supports DTR communication so you can cannot communicate with new Series 2.5 modules. reprogram the XBee. XBee standard Features: • 250 kbps max data rate Price Each 1 5+ • Built in antenna WIR-049 XBee Explorer Serial $39.00 Less 10% • Fully FCC certified • AT or API command set • 128-bit encryption XBee Explorer USB Board 1 mW Series 1 features: This is a simple to use, USB to serial base unit for the • 3.3 V @50 mA XBee line. This unit works with all XBee modules including • 1 mW output (+0 dBm) the Series 1 and Series 2.5, standard and Pro version. Plug • 100 m range the unit into the XBee Explorer, attach a mini USB cable, • 6 to 10-bit ADC input pins, 8 digital IO pins and you will have direct access to the serial and program- • over-air configuration ming pins on the XBee unit. 2 mW Series 2.5 features: • 3.3 V @40 mA • 2 mW output (+3 dBm) Price Each 1 • 120 m range WIR-045 XBEE Explorer USB Board $37.50 • 6 to 10-bit ADC input pins, 8 digital IO pins • over-air configuration XBee Breakout Board 50mW Series 2.5 features: • 3.3 V @295 mA This is a simple breakout board for the popular XBee • 50 mW output (+17 dBm) product from Maxstream. This board breaks out all 20 • 1600 m range pins of the XBee to a 0.1” standard spacing dual row • 4-10 bit ADC input pins, 10 digital header. We highly recommend using the female sockets IO pins to avoid having to solder the XBee permanently to the • Local or over-air configuration breakout board. This is the PCB only. Please order the • wire antenna accompanying 2 mm sockets (you’ll need 2!) and 0.1" headers.

Price Each 1 5+ Price Each 1 5 WIR-046 XBEE 1 mW series 1 wire antenna $39.95 less 10% WIR-040 XBEE Breakout board $3.95 less 10% WIR-041 XBEE 2 mW Wire antenna $46.95 less 10%

WIR-047 XBEE Pro 50 mW series 2.5 wire antenna $79.95 less 10% 10 Pin, 2 mm Pitch Sockets WIR-048 XBEE Pro 50 mW series 2.5 RPSMA con- $84.95 less 10% These 2 mm 10-pin sockets suit the XBee and XBee Pro nector modules.

XBee Pro 60 mW Wire Antenna This is the very popular 2.4 GHz XBee XBP24-AWI-001 module from Digi Price Each 1 (formally Maxstream). The Pro series have the same WIR-043 XBEE 2mm 10pin socket $1.59 pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zig- bee) and wrap it into a simple to use serial command set. Programmable Controllers These modules allow a very reliable and simple communication between microcontrollers, computers, systems, KTx-225 8 Relay 8 Analog USB IO Controller really anything with a serial port! Point to point and multi- point networks are supported. The KTx-225 is a USB or RS-485 controlled IO module for interfacing PCs to real world applications, such as controlling lights and sprinkler systems, reading sensors and monitoring switches or analog signals. Price Each 1 5+ A simple ASCII protocol allows control from Windows/Mac/Linux using WIR-042 XBEE Pro 60mW Wire antenna $79.95 less 10% either USB Virtual COM drivers or RS-485. Additionally, multiple devices can be connected to one RS-485 bus, allowing control of many devices from one USB port. XBee Explorer Regulated The KTA-225 has relays with 12 VDC coils and The XBee Explorer Regulated takes care of the 3.3 V regulation, signal requires an 9 to 15 VDC supply. The KTB-225 has conditioning, and basic activity indicators (Power, RSSI 24 V relays and requires a 18 to 28 VDC supply but and DIN/DOUT activity LEDs). It translates the 5 V is otherwise identical. signals to 3.3 V so that you can connect a 5 V (down to 3.3 V) system to any XBee module. Features: The board was conveniently designed to mate directly • 8 Relay Outputs 5 A @250 VAC with Arduino Pro boards and with the FTDI Basic boards • 8 Analog Inputs (10 bit) for wireless bootloading and USB based configuration. • 0 to 5 V, 0 to 3.3 V or 0 to 20 mA Analog Inputs, Jumper Selectable • 5 A Relay Switching, Power Indicator LED This unit works with all XBee modules including the Series 1 and Series • Arduino Compatible, accepts Arduino Shields (Ethernet / XBee) 2.5, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5 V. Price Each 1 5+ KTA-225 USB/RS-485 8 Analog input 8 relay out $135.00 less 10% Price Each 1 5+ 12 VDC

SFR-200 XBee explorer regulated $13.00 less 10% KTB-225 USB/RS-485 8 Analog input 8 relay out $135.00 less 10% 24 VDC

Page 22 Ocean Controls Catalogue 2012 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

KTx-223 ‘Relayduino’ USB/RS-485 IO Module PC Parallel Port Relay Card In Box The KTx-223 is a USB or RS-485 controlled IO module for interfacing PCs Essentially exactly the same as our PC Parallel Port Relay Board but sup- to real world applications, such as controlling lights and sprinkler systems, plied fully assembled in a high quality plastic case. reading sensors and monitoring switches and other digital signals. A simple ASCII protocol allows control from Windows/Mac/Linux using either All components provided including a plastic case with pre-punched and USB Virtual COM drivers or RS-485. silk screened front and rear panels to give the product a professional and attractive finish as shown in the photos. Finished Dimensions: 140 × 110 The controller is based on the hardware of the Arduino physical computing × 35 mm. Requires 12VDC plug pack controllers. It can be programmed as a stand-alone controller using the free, open source Arduino environment. Internally, the controller is “shield compatible”, allowing the use of many extension boards designed for the Arduino Deumilanove Multiple controllers can be connected to one or more PCs in an RS-485 network. Each controller can be assigned an address and will respond to commands addressed to them. Features: • 8 Relay Outputs, 5 A 250 VAC • 4 Opto-Isolated Inputs 5 to 30 VDC Price Each 1 5+ • 3 Analog Inputs (10 bit) KTA-165 PC Parallel Port Relay card in box $89.00 less 10% • Connections via Pluggable Screw Terminals • 0 to 5 V or 0 to 20 mA Analog Inputs • 5 A Relay Switching Pixel Programmable Controller Board • Power Indicator LED • Arduino Compatible This controller is based around the PICAXE 28X1 • Accepts Arduino Shields (Ethernet / XBEE) microcontroller. The PICAXE controllers have been • USB Virtual COM or RS-485 Input featured in Silicon Chip magazine. • Easily connect multiple units far apart by RS-485 The PIXEL controller features: • 4 Ten bit Analog Inputs (0 to 5 V) Price Each 1 5+ • 8 digital inputs • 8 relay outputs. KIT-223 USB/RS-485 IO Module 12/24 VDC as $120.00 less 10% a kit All connections to the I/O are via screw connectors. The Pixel Controller measures 122 x 111 x 25mm. The software KTA-223 USB/RS-485 IO module assembled and $135.00 less 10% provides a complete programming environment for generating BASIC pro- tested grams for the PICAXE. Programs can be edited, compiled and downloaded. KTB-223 USB/RS-485 IO module 24V assembled $135.00 less 10% The Pixel Controller is fitted with a Picaxe 28X microcontroller. and tested • Program memory approx. 1000 lines with intelligent download • Data memory 260 bytes Dual Comparator 0 to 10 V input, 12/24 VDC Powered • Requires 12 VDC power and D9 Male-Female Cable The KTA-2411 is a simple to use dual comparator that suits 0 to 10 V analog signals. Each comparator allows Price Each 1 5+ you to compare an input signal with a setpoint and hys- PIX-002 Pixel Controller board $129.50 less 10% teresis and activate a relay. With 4 hysteresis settings: 2.5%, 5%, 10% and 20%. PIX-003 Pixel controller board on DIN rail mount $159.00 less 10% The action of the relays (on above their respective setpoints, off below) can be inverted by shorting one of the Serial I/O Controller inputs to ground (affects both comparators.) Multi Drop Serial I/O Controller

Price Each 1 5+ The controller provides eight relay outputs each capable of switching 5 A @240 VAC and four opto-isolated digital inputs. All connections to the I/O KTA-2411 Dual Comparator 0 to 10 V input, 12 VDC $79.00 less 10% are via screw connectors. Powered It is controlled via a computer's RS-232 serial port via simple ASCII KTA-2413 Dual Comparator 0 to 10 V input, 24 VDC $79.00 less 10% Powered commands. Serial cables can be much longer (up to 35 metres) allowing ‘remote’ control.

PC Parallel Port Relay Controller Use our RS-232/RS-485 converters and distance of over a 1000 metres can be obtained. Requires This PC Parallel Port Relay board allows you to convert your PC into a 12 VDC plug pack and D9 Male-Female Cable. A dedicated controller. Simply connect a printer cable from your computer to multi drop kit is available to convert the standard the D-25 connector on the relay board. serial I/O controller KTA-108 into a Multi Drop Serial I/O controller. There are 8 relays each capable of switching 12 VDC/120 VAC @10 A and 240 VAC @5 A. All connections to the relay contacts are via screw terminals Each relay has an LED to indicate when it is operated. Requires 12 VDC plug pack and D-25 Male-Female Cable Price Each 1 5+

KIT-108 As kit $99.00 less 10%

KTA-108 Assembled and tested $115.00 less 10%

KTU-108 Multidrop Upgrade Kit $29.95 less 10%

KTM-108 Multidrop Controller assembled $135.00 less 10%

Price Each 1 5+ KIT-074 As Kit $57.00 less 10% For large packages over 5 kg there is KTA-074 Assembled and Tested $69.95 less 10% the option of Regular Post Parcels, Ex- press Post Parcels or Courier Parcels.

Ocean Controls Catalogue 2012 Page 23 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

KTx-251 Level Monitor Arduino Uno R3 Two relays can be programmed to activate when This is the new Arduino Uno R3. In addition to all the features of the an input crosses a level (with optional hysteresis) previous board, the Uno now uses an ATmega16U2 instead of the 8U2 or is within or outside a range. found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or It can easily interface with sensors having a 0 Mac (inf file for Windows is needed and included in the Arduino IDE), and to 5V or 0 to 20 mA or 4 to 20 mA outputs. Two the ability to have the Uno show up as a keyboard, mouse, joystick, etc. relays can be programmed to activate when an input crosses a level (with optional hysteresis) or The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, is within or outside a range. there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The By using the pushbuttons and screen you are able other is not connected and is reserved for future purposes. The Uno R3 to select ranges and set relay ON-OFF levels. Configuration is stored to works with all existing shields but can adapt to new shields which use non-volatile memory. A DIN rail mount version is available these additional pins. Features: Features: • Power Supply Vs and COM: • Input voltage: 7 to 12 V -- KTA-251 / KTC-251: 9 to 16 VDC (12 V Nominal) • 14 Digital I/O Pins (6 PWM outputs) -- KTB-251 / KTD-251: 18 to 32 VDC (24 V Nominal) • 6 Analog Inputs • Each relay can monitor 0 to 5 V, 0 to 20 mA, 4 to 20 mA or a • 32 k Flash Memory DS18S20 digital temperature sensor • 16 Mhz Clock Speed • Over setpoint, under setpoint, in band, out of band and loop fault modes • Configurable hysteresis • Configurable averaging Price Each 1 5+ • Dimensions: 76 x 72 x 24 mm SFA-103 Arduino Uno R3 $35.00 less 10% Price Each 1 5+

KTA-251 Level Monitor 12 VDC powered $89.00 less 10% Arduino Pro Mini: 3.3 V or 5 V @8 MHz Controllers

KTB-251 Level Monitor 24 VDC Powered $89.00 less 10% The Arduino Pro Mini is SparkFun’s minimal design approach to Arduino. The Pro Mini is very much like the Wee, but they added a handful of fea- KTC-251 Level Monitor 12 VDC powered DIN rail $109.00 less 10% tures to become a fully certified Arduino board. Arduino Pro Mini does not mount come with connectors populated so that you can solder in any connector or wire with any orientation you need. KTD-251 Level Monitor 24 VDC powered DIN rail $109.00 less 10% mount The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly Arduino Uno SMD to the FTDI Basic Breakout board and supports This is the new Arduino Uno. In addition to all the auto-reset. The Arduino Pro Mini also works with features of the previous board, the Uno now uses an the FTDI cable but the FTDI cable does not bring ATmega8U2 instead of the FTDI chip. This allows for out the DTR pin so the auto-reset feature will faster transfer rates, no drivers needed for Linux or not work. Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, Features: joystick, etc. • 3.3 V regulator (ARD-008) • 5 V regulator (ARD-012) Features: • DC input 3.3 V up to 12 V Reverse polarity protected (ARD-008) • ATmega328 microcontroller • DC input 5 V up to 12 V Reverse polarity protected (ARD-012) • Input voltage: 7 to 12V • USB connection off board • 14 Digital I/O Pins (6 PWM outputs) • Supports auto-reset • 6 Analog Inputs • On board Power and Status LEDs • 32 k Flash Memory • 16 Mhz Clock Speed Price Each 1 5+

Price Each 1 5+ ARD-008 Arduino Pro Mini - 3.3 V @8 MHz $25.00 less 10% SFA-102 Arduino uno SMD $35.00 less 10% ARD-012 Arduino Pro mini-5 V @8 MHz $25.00 less 10%

Arduino Uno USB Controller Arduino Pro 328: 5 V @16 MHz Arduino is an open-source physical computing platform based on a simple This is Sparkfun’s 5 V Arduino running the 16 MHz bootloader (select I/O board and a development environment that implements the Process- ‘Arduino Duemilanove w/ 328’ within the Arduino software). The power ing/Wiring language. Arduino can be used to switch was moved to the side of the board to allow control when a shield develop stand-alone interactive objects or can is attached. The Arduino Pro is like the Arduino Duemilanove (same pin be connected to software on your computer (e.g. out) but to keep the cost low, we used all SMD components, made it two Flash, Processing, MaxMSP). The open-source IDE layer, etc. This board connects directly to the FTDI Basic Breakout board can be downloaded for free (currently for Mac OS and supports auto-reset. The Arduino Pro also works with the FTDI cable X, Windows, and Linux). but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. The Uno uses an ATmega8U2 instead of the Duemilanove's FTDI chip for usb to serial conver- Features: sion. This allows for faster transfer rates, no • ATmega328 running at 16 MHz external resonator. Select 'Arduino drivers needed for Linux or Mac (inf file for Windows is needed), and the Duemilanove w/ 328' to get the delay functions to work correctly. ability to have the Uno show up as a keyboard, mouse, joystick, etc. The • USB connection off board ATmega8U2 can be programmed with an AVR programmers. • 5 V regulator • Max 150 mA output Features: • Over cur rent protected • Operating Voltage: 5V • Reverse polarity protected • Input Voltage (recommended): 7 to 12 V • DC input 5 V up to 12 V • Input Voltage (limits): 6 to 20 V • Resettable fuse prevents damage to board in • Digital I/O Pins: 14 (of which 6 provide PWM output) case of short • Analog Input Pins: 6 • Power select switch acts as on/off switch

Price Each 1 5+ Price Each 1 5+

SFA-100 Arduino Uno USB Controller $35.00 less 10% ARD-040 Arduino Pro 328 - 5V/16MHz $27.50 less 10%

Page 24 Ocean Controls Catalogue 2012 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

Arduino Mega 2560 Freetronics EtherTen (100% Arduino compatible with on The Arduino Mega is a microcontroller board based board Ethernet) on the ATmega2560. It has 54 digital input/output The EtherTen is a 100% Arduino compatible board that can talk to the pins (of which 14 can be used as PWM outputs), world. Do Twitter updates automatically, serve web pages, connect to 16 analog inputs, 4 UARTs (hardware serial ports), web services, display sensor data online, and control devices using a web a 16 MHz crystal oscillator, a USB connection, a browser. power jack, an ICSP header, and a reset button. The Freetronics EtherTen uses the same ATmega328P as the Duemilanove It contains everything needed to support the mi- and the same Wiznet W5100 chip used by the official Arduino Ethernet crocontroller; simply connect it to a computer with Shield, so it's 100% compatible with the Ethernet library and sketches. a USB cable or power it with a AC-to-DC adapter or battery to get started. Any project you would previously have built with an Arduino and an Eth- ernet shield stacked together, you can now do all in a single, integrated The Mega is compatible with most shields designed for the Arduino board. Duemilanove or Diecimila. This is the new Arduino Mega 2560. In addition to all the features of the previous board, the Mega 2560 now uses an Features: ATmega8U2 instead of the FTDI chip. This allows for faster transfer rates, • Mini-USB connector: no more shorts no drivers needed for Linux or Mac (inf file for Windows is needed), and against shields! the ability to have the board show up as a keyboard, mouse, joystick, etc. • D-13 pin isolated with a MOSFET so you can use it as an input. It also has twice as much flash memory. • Power-over-Ethernet support, both Features: cheapie DIY or full 802.3af standards- compliant. • Input voltage: 7 to 12V • Ethernet activity indicators on the PCB • 256 k Flash Memory and the jack, 10/100 base-T auto-selection. • Fully compatible with standard Ethernet library. • Reset management chip. Price Each 1 5+ • Fixed SPI behavior on Ethernet chipset. SFA-101 ARduino Mega 2560 $72.00 less 10% Price Each 1 Arduino Mega 2560 R3 FRA-005 Freetronics EtherTen $63.59 The Mega 2560 R3 has all the features of the Mega 2560 but also adds SDA and SCL pins next EtherMega (100% Arduino Mega 2560 compatible with on to the AREF. In addition, there are two new pins placed near the RESET pin. board ethernet) One is the IOREF that allow the shields to adapt The EtherMega is a 100% Arduino Mega 2560 com- to the voltage provided from the board. The other patible board that can talk to the world. Do Twitter is a not connected and is reserved for future pur- updates automatically, serve web pages, connect to poses. The Mega 2560 R3 works with all existing web services, display sensor data online, and control shields but can adapt to new shields which use devices using a web browser. these additional pins. The Freetronics EtherMega uses the same AT- Features: mega2560 as the Arduino Mega 2560 so it has • ATmega2560 microcontroller masses of RAM, flash memory, and I/O pins, and • Input voltage: 7 to 12V also includes the same Wiznet W5100 chip used by the official Arduino • 54 Digital I/O Pins (14 PWM outputs) Ethernet Shield, so it's 100% compatible with the Ethernet library and • 16 Analog Inputs sketches. • 256 k Flash Memory Features: • 16 Mhz Clock Speed • Top-spec ATmega2560 MCU. • Mini-USB connector: no more shorts against shields! • Switchmode voltage regulator for wide input voltage range. Price Each 1 5+ • D-13 pin isolated with a MOSFET so you can use it as an input. SFA-104 Arduino Mega 2560 R3 $59.00 less 10% • Power-over-Ethernet support, both cheapie DIY or full 802.3 af standards-compliant. • Ethernet activity indicators on both the PCB and the jack. Freetronics Eleven • 10/100 base-T auto-selection. It is based on the existing Arduino Uno but with improvements and updates for ease of use, cost and getting started. It's 100% Arduino Price Each 1 compatible. Also included in the package are a USB cable, and our Getting FRA-013 EtherMega $108.18 Started guide sheet. As well as the standard Arduino Uno features found here. Really need to program the bootloader into an MCU? Not usually required, but we've USBDroid (Arduino Uno Compatible with on board Ar- included a DIP socket and the X3 programming pads for it. duino/USB host) The power jack, headers and ICSP are all in exactly the same location as Arduino standard boards. The Eleven is perfectly compatible with all The USBDroid combines the functionality Arduino shields, projects and sketches. of the Freetronics Eleven along with a USB host-mode controller and a microSD memory Features: card slot all merged together into a single, • Prototyping area integrated board that is 100% Arduino • LEDs visible on the edge compatible. • Dual crystals • Mini-USB Connector This is the ideal platform for developing • Overlay guide where you need it peripherals or projects based around Android • Top spec MCU devices with ADK (Android Developer Kit) • D-13 pin works for everything functionality, but without requiring a USB • Mounting holes, power and X3 pads host controller shield stacked onto an Arduino. Connect your Android phone for all kinds of controller and networking Price Each 1 5+ features, and other USB devices like game controllers, Bluetooth dongles, digital cameras, etc. In addition we've included a high current onboard FRA-003 Freetronics Eleven $36.32 less 10% power supply so you can charge your Android device directly off the USBDroid.

Price Each 1

FRA-011 USBDroid $63.59

Ocean Controls Catalogue 2012 Page 25 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

Freetronics Ethernet Shield with POE Arduino Starter Kit Put your Arduino online with the Freetronics Ethernet Shield and have it The Arduino Starter Kit is a great gift for beginners and weathered profes- talk to the world. Do Twitter updates automatically, serve web pages, con- sionals alike. Included is a multitude of inputs, outputs, and sensors to nect to web services, display sensor data online, and control devices using get you started in the wonderful world of Arduino. a web browser. The Freetronics Ethernet Shield is based on the same Wiz- net W5100 chip used by the official Arduino Ethernet Shield, and is 100% Kit Includes: compatible with the Ethernet library and sketches. • Arduino Duemilanove ATmega328, However, a few little improvements have been made • 6’ USB A to B cable, Miniature breadboard • Male to Male jumper wires by Freetronics. • Flex Sensor, 12 mm button Features: • SoftPot, Photocell , Thermistor • Power over Ethernet • Tri-Color LED, Basic LEDs • Prototyping Area • Linear trim pot, Buzzer • SPI Fixes, Reset Fixes, Filtering Fixes • 330 Ω Resistors and 10 kΩ Resistors.

Price Each 1 5+ Price Each 1 5+

FRA-002 Freetronics Ethernet Shield with POE $40.86 less 10% ARD-005 Arduino starter kit $69.95 less 10%

Passive POE Cable Set Power Driver Shield Kit Sometimes it's hard to get power to your Ethernet devices. Wouldn't it be This shield allows you to use a computer power sup- convenient to use the same cable for power and data? Using these power ply (or other power source) to use your Arduino to over Ethernet adapters, you can do just that! switch high current. With RFP30N06LE MOSFETS, you Each cable has a female RJ45 on one side which is adapted to a male can easily control a lot of current directly from your RJ45 and 5.5 x 2.1 mm barrel jack connector on the Arduino.The board provides 6 PWM outputs via screw other side. The 'injector' cable has a female barrel jack terminals. This board is a very easy way to start using connector and the 'splitter' cable has a male barrel jack. MOSFETS for your next high current project. Simply attach the cables at each end of your network Note: If you want to stack another shield on top of this cable, plug the male barrel jack from the splitter into one, you will want to double-up on the stackable head- your target device and plug your power adapter into ers to clear the MOSFETs. the injector. Now you can use one cable to provide both power and data for your Ethernet enabled device. Price Each 1 5+

SFA-406 Power Driver Shield Kit $19.00 less 10% Price Each 1

SFC-003 Passive POE Cable Set $5.00 KitTen (Arduino-compatible kit) The KitTen is a simplified version of the Freetronics TwentyTen Arduino POE Regulator 802.3 af compatible board supplied as a kit using through-hole parts for easy as- The 802.3 aF Power-over-Ethernet regulator module sembly. mounts on the Freetronics Ethernet Shield to allow it to It may be easy to build, but it's still full-featured and high-performance. If accept power at a nominal 48 V from commercial PoE you compare it to typical Arduino-compatible kits you'll see that it doesn't injectors and switches (Power Sourcing Equipment, or scrimp on anything: in fact our design has more smoothing capacitors PSE) that support the 802.3 aF standard. alone than the entire parts count of most other kits! This regulator module performs the necessary signal- It even includes a 3.3V regulator to allow it to use shields that require ling to communicate with the PSE and indicate that the 3.3V, which is not something you see in typical kits. device connected to the network segment is capable of accepting power via the LAN, which causes the PSE to activate its power injection mode. Kit Includes: The module then takes the power supplied by the PSE and pre-regulates it • Gold-plated Freetronics KitTen PCB with over- down to 7.5 V before passing it through to your Arduino for the final drop lay on both top and bottom. to 5 V. • A top-spec ATmega328P MCU pre-loaded with the Arduino bootloader. • All the required supporting parts. Price Each 1 5+ • The fully illustrated KitTen Assembly Guide. • Our Getting Started guide. FRA-004 POE Regulator 802.3 af $27.23 less 10% Price Each 1 Arduino Inventors Kit FRA-012 KitTen $24.50 This kit has it all. It now includes the new Arduino Uno, the fabled base- plate, and all the sensors you can shake a stick at. The SparkFun Inven- tor's Kit for Arduino is a box of goodies to get the very beginner started FTDI Basic Breakout 5 V with programmable electronics. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The It includes all the bits you need to build 12 basic circuits no soldering pinout of this board matches the FTDI cable to work with official Arduino required! The SIK comes with everything pictured and a 36 page color and cloned Arduino boards. It can also be used for general serial applica- printed 'starter' guide. Once these concepts are mastered, very impres- tions. The major difference with this board is that it brings out the DTR sive projects are possible using simple recombinations. pin as opposed to the RTS pin of the FTDI cable. Kit includes: The DTR pin allows an Arduino target to auto-reset • Arduino Uno, 6" USB cabble, breadboard and breadboard holder when a new Sketch is downloaded. This is a really nice • 74HC595 Shift Register feature to have and allows a sketch to be downloaded • 2N2222 Transistors, 1N4001 Diodes without having to hit the reset button. This board will • DC Motor with wires, Small Servo auto reset any Arduino board that has the reset pin • 5 V Relay, TMP36 Temp Sensor, Flex sensor brought out to a 6-pin connector. • Jumper Wires, Photocell, softpot • Tri-color LED, Basic LEDs The pins labeled BLK and GRN correspond to the • 10 K Trimpot, Piezo Buzzer colored wires on the FTDI cable. The black wire on the • Big 12 mm Buttons, 330 Ω and 10 K Resistors FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align • Male Headers the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable.

Price Each 1 5+ Price Each 1 5+

ARD-015 Arduino Inventor's Kit $93.50 less 10% ARD-011 FTDI Basic Breakout 5 V $21.50 less 10%

Page 26 Ocean Controls Catalogue 2012 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

FTDI USB-to-Serial Cable 5V Analog/Digital MUX Breakout Many Arduino boards save expense by leaving This is a breakout board for the very handy 16-Chan- off the USB-to-Serial converter, providing a nel Analog/Digital Multiplexer/Demultiplexer CD- simple serial interface instead using a stand- 74HC4067. This chip can be used to connect 16 analog ard 6-way header. For example the KitTen sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an ana- Arduino compatible board uses this header. log to digital conversion pin. This allows 16 sensors to You can then use an FTDI USB-to-Serial cable operate on only 5 pins of a micro! This is a great way with multiple boards, using it to load the sketch and then disconnecting it. to connect a lot of sensors to a few pins. One serial stream connected to the SIG pin can be piped to multiple Price Each 1 outputs. The mux/demux also works with digital signals (like serial, I2C, SPI). This means you can hook up multiple serial devices (like a GPS TX FRA-015 FTDI USB-to-Serial Cable 5 V $16.36 pin, and a XBee DOUT pin) to one RX pin on a microcontroller. The IC can control analog voltages that vary across the voltage supply Arduino ProtoShield Kit range. The bidirectional switches allow any analog or digital input to be used as an output and vice-versa with a "Break-Before-Make" switching of Riding on the waves of the very popular Arduino USB 6ns at 4.5 V. In addition, the switches have low "on" resistances and low board is this small prototyping shield. The Protoshield "off" leakages. Includes and enable control which when high will disable mates with the Arduino USB board and gives the user all switches to their "off" state a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is Price Each 1 brought to the top level. SFA-205 Analog/Digital MUX Breakout $5.00 This comes in kit form and must be soldered together by the end user. Be- cause assembly is easy there are no assembly instructions! All soldering is through-hole (relatively easy). Arduino XBee Shield Kit Includes: The XBee Shield simplifies the task of interfacing an • 1x Protoshield bare PCB XBee with your Arduino. This board mates directly with • 1x 40pin break-away male header an Arduino Pro or USB board, and equips it with wire- • 3x 6-pin female connector less communication capabilities using the popular XBee • 2x 8-pin female connector module. • 1x 4-pin female connector • 2x Bright 5 mm LEDs This unit works with all XBee modules including the • 2x 330 Ω resistors Series 1 and Series 2.5, standard and Pro version. This is SparkFun’s own • 2x Momentary push buttons design and is a distant relative to the official XBee Shield from Arduino. • 1x 10 k resistor • 2x 0.1 uF Capacitors The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino’s reset button is brought Features: out on the shield, and a 12x11 grid of 0.1” holes are available for proto- • All Arduino pins are brought to the top level typing. The shield does not come with headers installed; we recommend • 5 V, GND, and Raw pins are exposed as well the 6 and 8-pin stackable headers. The XBee module is also not included. • BlueSMiRF socket for wireless communication between Arduinos • 2 general use LEDs, 1 general use button Features: • Reset Button brought to top level • Mounts directly onto your Arduino • DIN and DOUT pins of XBee can be connected to either the UART pins Price Each 1 5+ or any digital pin on the Arduino through a solder jumper • 3.3V power regulation and level shifting on-board ARD-060 Arduino Protoshield Kit $19.00 less 10% • Reset button brought out • Power, DIN, DOUT, RSSI and DIO5 indicator LEDs Arduino MegaShield Kit Price Each 1 5+ The Arduino Mega now has its very own prototyping shield! The MegaSh- ield mates with the Arduino Mega board and gives the user a prototyping ARD-091 Arduino XBEE shield $25.00 less 10% area, two general LEDs, and, most important of all, the Arduino Mega reset switch is brought to the top level. The shield also works with our small ProtoShield for Arduino Pro Mini breadboards if you don’t want to solder to the prototyping area. This is a small prototyping shield for the Arduino Pro Mini. This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions! All soldering is Features: through-hole (relatively easy) but always check your component orienta- • VCC, RAW and GND buses tion before soldering! • Serial (RXI & TXO) pins broken out to small buses • Works with both 5 V and 3.3 V Pro Mini versions Kit Includes: • Upholds the Pro Mini’s small form factor • 1 - MegaShield PCB • 38 unconnected PTHs for prototyping • 1x 6-pin stackable female connector • 11x 8-pin stackable female connector • 1x Bright 5 mm Green LED Price Each 1 5+ • 1x Bright 5 mm Red LED • 2x 330 Ω resistors SFA-201 Protoshield for arduino pro mini $4.00 less 10% • 1x Momentary push button • 1x 10 k resistor Arduino Motor Shield Card Features: • All Arduino Mega pins are brought to the top level This is a motor shield for Arduino that will control • 5 V and GND power busses two DC motors. Based on the L298 H-bridge, the • Power and stat (connected to D-13) LEDs Ardumoto can drive up to 2 A per channel. • Reset Button brought to top level The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction and all driver lines Price Each 1 5+ are diode protected from back EMF. ARD-081 Arduino Megashield shield $19.50 less 10% Price Each 1 5+ ARD-030 Ardumoto-Motor Driver Shield $34.95 less 10%

Ocean Controls Catalogue 2012 Page 27 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

Arduino Ethernet Shield USB Host Shield The Arduino Ethernet Shield allows an Arduino board The USB Host Shield contains all of the digital logic and to connect to the internet. It is based on the Wiznet analog circuitry necessary to implement a full-speed W5100 ethernet chip providing a network (IP) stack USB peripheral/host controller with your Arduino. capable of both TCP and UDP. This means you could use your Arduino to interface The Arduino Ethernet Shield supports up to four simul- with and control any USB slave device - thumbdrives, taneous socket connections. Use the Ethernet library digital cameras, bluetooth dongles, and much more! to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long A four-wire serial interface is used to communicate with the host control- wire-wrap headers which extend through the shield. This keeps the pin ler chip, so the shield connects the Arduino’s hardware SPI pins (D10-13) layout intact and allows another shield to be stacked on top. to the MAX3421E. A USB type A female connector is wired up to the IC, and it also supplies 5 V as any normal USB port would. Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. While using the Ethernet Shield, these The Host Shield takes its power from the ‘Vin’ pin on your Arduino. Power pins cannot be used for general I/O. The shield provides a standard RJ45 from that pin is regulated to both 5 V and 3.3 V on the shield. All SPI ethernet jack. The reset button on the shield resets both the W5100 and signals are sent through a hex converter to step them down to 3.3 V. the Arduino board. Price Each 1 5+

Price Each 1 5+ SFA-400 USB host sheld $29.00 less 10% ARD-020 Arduino ethernet shield $55.00 less 10% LCD and Keypad Shield ProtoShield Short It's great when you want to build a stand-alone project with its own user interface that doesn't require we designed a special prototyping shield that's short a computer attached to send commands to your enough to fit onto an Ethernet Shield (or our EtherTen) Arduino. It has a reset button. with clearance behind the Ethernet jack. Features: Features • 16 x 2 LCD using HD44780-compatible display • Gold plated PCB: solders easily and very resistant module (white characters on blue background). to corrosion. • 5 buttons on one analog input (A0). • Top and bottom overlay. • LCD backlight with current limiting, brightness and on/off control- • Yellow soldermask so you can write notes on the PCB with a Sharpie. lable by D3, can be moved to D2, D10, A1, A2, A3, A4 or A5 for easy • Mounting pads for "reset" button wired through to Arduino reset liine project pin compatibility. • Clearly marked GND and 5 V rails beside prototyping area. • Recessed LCD, panel mount screw holes and button layout suitable for panel or cabinet mounting if desired. Note that the ProtoShield Short comes without any extra parts at all.

Price Each 1 Price Each 1 FRA-006 LCD and Keypad Shield $27.23 FRA-007 ProtoShield Short $4.50

Colour LCD Shield ProtoShield Basic The Colour LCD Shield, recommended by and designed in partnership with ProtoShield Basic, the cheapest Arduino prototyping shield on the market. an SFE customer, provides an easy method of connect- They're designed to be so cheap that you can keep a few ing the popular Nokia 6100 LCD to your Arduino USB or around "just in case", and we even sell them in a 5-pack Pro. The board comes as shown with the 128x128 mini to save you even more money! colour LCD, as well as a backlight driver circuit (boosts Features: to 7V), and three momentary push-buttons (tied • Gold plated PCB: solders easily and very resistant to through a jumper to pins D3-5). corrosion. The Nokia 6100 LCD is controlled through a 9-bit SPI • Top and bottom overlay. • Yellow soldermask so you can write notes on the PCB with a Sharpie interface. The control pins of the LCD are connected to the hardware • Mounting pads for "reset" button wired through to Arduino reset line SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 • Mounting pads for "power on" LED and current-limiting resistor. and the reset pin is connected to D8. Voltage from the ‘5 V’ pin of the • Mounting pads for 2 x 100 nF power supply smoothing capacitors Arduino is boosted to 7V to power the LCD backlight. The Nokia 6100 LCD • Clearly marked GND and 5 V rails beside prototyping area. is included with the Colour LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers. Note: Components displayed on board aren't included.

Price Each 1 5+ Price Each 1 SFA-401 Colour LCD Shield $46.00 less 10% FRA-009 ProtoShield Basic $4.50 microSD Shield ProtoShield Pro Communication with microSD cards is achieved over an They come with all the supporting components already SPI interface. The SCK, DI, and DO pins of the microSD fitted as surface-mount parts so you can start using socket are broken out to the ATmega168/328's standard them right away, and we even ship them with two sets SPI pins (digital 11-13), while the CS pin is broken out of headers: regular male break-away headers, and also to Arduino's D8 pin. If you decide to use one of the stackable male/female headers! many open source FAT libraries (like FAT16 or SDFat) Features: make sure to change the code to reflect the location of • 2 × 100 nF power supply smoothing capacitors pre-fitted as surface- the CS pin. Most libraries assume the CS pin is connected to D10; this will mount parts. have to be changed to D8. Also for the libraries to work pin D10 will have • Reset button wired through to the Arduino so you can reset it even to be set as an output in the 'setup()' section of your sketch. The shield with the shield mounted over the top. also includes a large prototyping area with a 13 x 12 grid of 0.1" pitch • One general-purpose push button with its output biased LOW via a PTHs. 10 K resistor: output goes HIGH on button press. • 2 general-purpose surface-mount LEDs (one green, one red) with cur- This shield comes populated with a microSD socket, red power indicator rent limiting resistors pre-fitted: drive HIGH to illuminate. LED, and a reset button; but it does not come with headers installed. We recommend the 6 and 8-pin stackable headers. Price Each 1 Price Each 1 5+ FRA-008 ProtoShield Pro $15.41 SFA-402 microSD shield $19.00 less 10%

Page 28 Ocean Controls Catalogue 2012 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

CAN Bus Shield K Thermocouple Multiplexer Shield This shield gives the Arduino CAN-Bus capability. The K Thermocouple Multiplexer Shield is designed to allow multiple high temperature reading with an Ar- Features: duino control board. The addition of an SD card shield • CAN v2.0B upto 1 Mb/s can allow for temperature logging. • High speed SPI Interface (10 MHz) • Standard and extened data and remote frames Features: • CAN connection via standard 9-way sub-D con- • Connect up to 8 K-Type Thermocouple Mutiplexer nector Shield • 9-way sub-D standard OBDII connection cable • 0 to 1024°C with MAX6675 IC(KTA-259) or 0 to 128°C with • Power can supply to Arduino by sub-D via reset- MAX6674(KTB-259) table fuse and reverse polarity protection. • 0.1” Pitch Screw Terminals for Thermocouple connection • Socket for EM406 GPS module • ADG608 Multiplexer IC • Micro SD card holder • 13 x 8 Prototyping Area with Analog and Power pins • Connector for serial LCD • Chip Select Pin Jumper Selectable means multi SPI shield compat- • Reset button. two LED indicator ibility • Joystick control menu navigation control • Combine with SD card shield for powerful Temperature Logging • Powered from 3.3 V Arduino Pin, 5 V compatible Price Each 1 5+ Price Each 1 5+ SFA-403 CAN Bus shield $45.00 less 10% KTA-259 K thermocouple multiplexer shield $42.50 less 10% Musical Instrument Shield ScrewShield V1.5 This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/ The ScrewShield extends all pins of the Arduino out to 3.5 mm pitch pair of headphones to the 1/8" stereo jack on the shied screw terminals. It also has a lot of the utility provided by the Arduino and pass the proper serial commands to the IC and you'll Protoshield including: a large prototyping space of both connected and be playing music in no time! unconnected 0.1" spaced through-holes, a couple 5 V and GND busses, a reset button, general use push button, and a 5 mm yellow LED. This The VS1053 contains two large tonebanks including vari- product includes all the parts shown and comes in kit ous piano, woodwinds, brass, synth, SFX and percussion sounds. The form and must be soldered together by the end user. shield is also capable of playing several tones simultaneously (maximum polyphony of up to 31 sounds!). Kit Includes: • ScrewShield PCB • 5 mm Yellow LED Price Each 1 5+ • 330 Ω Resistor • Stackable Headers, Momentary Push Buttons SFR-404 Musical Instrument Shield $29.00 less 10%

Price Each 1 5+ MP3 Player Shield SFA-002 ScrewShield V1.5 $20.00 less 10% This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now Terminal Shield for Arduino you can pull MP3 files from an SD card and play them The Terminal Shield breaks out all the Arduino headers to handy screw using only one shield, effectively turning any Arduino terminals, making it really easy to connect external wires without using a into a fully functional stand-alone MP3 player! soldering iron. Ideal for quick experiments or for robust connections! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode The center area of the shield is also a huge prototyping area, allowing audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/ you to add your own parts to suit your project. A blue "power" LED shows AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg when your Arduino is powered up, and there are Vorbis. The VS1053 receives its input bitstream through a serial input bus also red, green, and blue general-purpose LEDs (SPI). After the stream has been decoded by the IC, the audio is sent out with current-limiting resistors. The Terminal to both a 3.5 mm stereo headphone jack, as well as a 2-pin 0.1" pitch Shield comes with all the supporting components header. already fitted as surface-mount parts so you can start using it right away, and we even provide Price Each 1 5+ stackable headers to allow you to mount another shield on top. SFA-405 MP3 Player Shield $39.00 less 10% Features: • Gold-plated surface: solders easily and very resistant to finger oil, Cellular Shield with SM5100B etc. • Large prototyping area with through-plated holes. The Cellular Shield for Arduino includes all the parts • Clearly marked GND and 5V rails beside prototyping area. needed to interface your Arduino with an SM5100B cel- • Blue surface-mount “power on” LED. lular module. This allows you to easily add SMS, GSM/ • 2 × 100 nF power supply smoothing capacitors pre-fitted as surface- GPRS, and TCP/IP functionalities to your Arduino-based mount parts. project. All you need to add cellular functionality to your • Reset button wired through to the Arduino so you can reset it even Arduino project is a SIM card (pre-paid or straight from with the shield mounted over the top. your phone) and an antenna and you can start sending • 3 general-purpose surface-mount LEDs (red, green, blue) with current limiting resistors pre-fitted: drive HIGH to illuminate. Serial.print statements to make calls, send texts and serve web pages! • Overlay printed on both the top and the bottom of the board so you The main components of the Cellular Shield are a 60 pin SM5100B con- don’t have to turn it over to see what you’re soldering onto. nector, a SIM card socket, and an SPX29302 voltage regulator configured to regulate the Arduino’s raw voltage to 3.8 V. The board’s red LED indi- Price Each 1 cates power. The Arduino’s reset button is also brought out on the shield. FRA-010 Terminal Shield for Arduino $15.41 Two jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1” spaced header with connections for microphone inputs and speaker outputs. Headers are not soldered on, we recommend the Prices in the catalogue do not include 6 and 8-pin stackable headers. The SM5100B cellular module is included with this product. GST and they are subjected to change without notice, please visit www.ocean- Price Each 1 5+ controls.com.au for the latest prices SFA-301 Cellular Shield with SMS100B $115.00 less 10%

Ocean Controls Catalogue 2012 Page 29 OCEANPROGRAMMABLE CONTROLS CONTROLLERS

WiFly Shield Arduino Project Enclosure This new version breaks out the PI09, FORCE WAKE, and the hardware The Arduino enclosure allows you to easily enclose reset lines. It also has a different crystal and uses the RN-131C. your Arduino main board, Arduino Mega, or any other board that fits the Arduino foot print (FEZ Domino, The WiFly Shield equips your Arduino the ability to connect to 802.11 b/g FEZ Panda, Netduino, etc). It simply presses shut, so wireless networks. The featured components of the shield are a Roving you don't have to worry about screws or fasteners. Network's RN-131C wireless module and an SC16IS750 SPI-to-UART chip. It has room internally for an Arduino and a shield. The SPI-to-UART bridge is used to allow for faster trans- It even has a removable tab mated for use with an mission speed and to free up the Arduino's UART. Ethernet shield. It also has a snap-in compartment in Power is taken from the Vin pin of your Arduino, the back for accessing switches or connections or battery access. regulated to 3.3 V, and provided to both the RN-131C Note: Some older Arduino boards have a slightly smaller hole near the and the SC16IS750. You'll communicate with the WiFly rear the ICSP connector. To make the case work with these boards simply Shield over SPI using Arduino digital pins 10 to 13 (CS, drill out the hole to 1/8" and you will be fine. Also, with the newer Ether- MOSI, MISO, SCLK respectively). net Shields, you will need to remove one of the pegs to get everything to The shield includes the RN-131C, SC16IS750 and their supporting compo- fit correctly. Dimensions: 87 x 64 x 28mm nents. The shield also provides a small prototyping area, with 0.1" spaced holes. Headers are not soldered on, we recommend the arduino stackable Price Each headers. 1 5+ SFA-003 Arduino Project Enclosure $15.00 less 10% Price Each 1 5+

SFA-303 WiFly Shield $99.00 less 10% Arduino and Breadboard Holder This is a simple plastic plate that holds an Arduino DMD: Dot Matix Display 32 x 16 Red (Duemilanove or Uno) and self adhesive clear breadboard. It makes prototyping projects easier and gives A huge dot matrix LED panel to connect to you a solid place to hook things up. The Arduino board your Freetronics Eleven, EtherTen and more! snaps in and the breadboard can either be stuck in place This large, bright 512 LED matrix panel or just left floating. It should also work with any board has on-board controller circuitry designed sharing the same footprint as the Arduino. to make it easy to use straight from your Note: This will not work with the FEZ Domino. It has a header in board. Clocks, status displays, graphics the way. readouts and all kinds of impressive display projects are easy to create using this display. Price Each 1 5+

Features: SFA-004 Arduino and breadboard holder $4.50 less 10% • 32 x 16 high brightness Red LEDs (512 LEDs total) on a 10mm pitch • 5 V operation • Viewable over 12 metres away USB 32-Bit Whacker - PIC32MX795 Development Board • Tough plastic frame • Controller ICs on board, simple clocked data interface The UBW32 is also a very good stand-alone development platform for the • Arduino compatible library, graphics functions and example support USB PIC32 chip. If you need low-level debugging, you can also attach an • Dimensions: 320(W) x 160(H) x 14(D) mm (30 mm(D) including rear ICD2/ICD3 or other PIC debugger. connectors) The PIC32 chip is capable of doing USB OTG, USB Mass Store, USB Virtual Com Port and USB Host roles. There is a footprint on the bottom of the Price Each 1 board for a USB connector that will allow you to plug any USB device into FRA-014 DMD 32 x 16 Red $36.32 the UBW32. There is a jumper that allows you to power the VBUS 5 V USB wire if you program your UBW32 to be a USB Host. Features: TellyMate • PIC32MX795 The TellyMate Shield equips an Arduino with the ability to send simple text • USB Bootloader and graphics to a TV. The TellyMate Shield connects to an Arduino board • 128 KBytes of RAM using long headers which extend through the shield. This keeps the pin • 512 KBytes of Flash layout intact and allows another shield to be stacked on top. Arduino uses • 78 usable I/O pins digital pin1 (TX) to communicate with the TellyMate. Just plug it into your Arduino and use Serial.println() commands to output text onto your TV! Price Each 1 5+

The shield provides a 3.5 mm jack and the nec- SFC-050 USB 32-Bit Whacker PIC32MX795 Devel- $42.95 less 10% essary cable to convert to a composite video con- opment board nection. The baud rate is selected by jumpers, which are also included. USB Bit Whacker - 18F2553 Development Board Features: • TV output from your Arduino The USB Bit Whacker is a small board with a command interpreter for • PAL or NTSC Composite Video basic input and output control. Board comes fully tested, preprogrammed, • Stackable Shield and assembled as shown. • Works with Serial.println() etc. The 18F2553 also comes pre-programmed with a USB bootloader. This means you can create HEX files using any compiler or assembler (C18, Price Each 1 5+ CC8e, SDCC) and then load that HEX file onto the PIC without an external ARD-050 Tellymate $37.25 less 10% programmer - directly over USB! Power is obtained over USB. Features: • Reset Button, General Input Button (also used to Arduino Stackable Header Kit enter program mode during a reset) • Mini-USB Connection These headers are made to work with the Arduino Main • 16 General I/O Board, Arduino Pro, Arduino Mega, KTA-223 and KTA-225. • TX/RX (can be used as a USB to UART converter They are the perfect height for clearing the USB-B con- board) nector and great for stacking multiple shields. • 24 MHz Resonator This kit includes 4 headers (2 x 8-pin and 2 x 6-pin), • Two Status LEDs enough to connect a shield to an Arduino Main Board. Price Each 1 5+ Price Each 1 5+ SFB-001 USB bit whacker - 18F2553 Development $31.35 less 10% SFA-001 Arduino stackable header kit $2.00 less 10% board

Page 30 Ocean Controls Catalogue 2012 OCEANREMOTE & GSMCONTROLS CONTROLLERS

IOIO for Android Real Time Clock Module The IOIO board contains a single MCU that acts as a This a custom designed module for the DS1307 Real Time Clock. The USB host and interprets commands from an Android included Lithium coin cell battery (CR1225 41mAh) will run the module for app. In addition, the IOIO can interact with peripheral a minimum of 9 years (17 years typical) without external 5 V power. The devices in the same way as most MCUs. Digital Input/ DS1307 is accessed via the I²C protocol. Leap year compensation We’ve Output, PWM, Analog Input, I2C, SPI, and UART con- written a test-bed to program the modules. This test-bed code should give trol can all be used with the IOIO. you some insight on how to interface the module to any microcontroller using our example software I²C and BCD routines. Code to control these interfaces is written in the same way as you write an Android app with the help of a Features: simple to use app-level library. The board needs to be • Hour : Minutes : Seconds AM/PM powered through the VIN pin with a 5 V to 15 V power supply. The IOIO • Day Month, Date - Year can also provide 1.5 A at 5 V for charging your Android device or power- • Accurate calendar up to year 2100 ing small servos, etc.. A potentiometer on the board allows limiting the • Battery backup included, 1 Hz output pin amount of current the Android device pulls for detection and charging. • 56 Bytes of Non-volatile memory available to user

Price Each 1 5+ Price Each 1 SFC-070 IOIO for Android $49.00 less 10% SFC-010 Real time clock module $24.95

FTDI Basic Breakout 3.3 V Small Solenoid 5 V This is a basic breakout board for the FTDI FT232RL USB to serial IC. The Solenoids are a great way to induce linear motion for pinout of this board matches the FTDI cable to work with official Arduino pushing, pulling or controlling switches and levers. This and cloned Arduino boards. It can also be used for smaller solenoid is designed to work directly with 5 V general serial applications. which makes it a great match for embedded projects. It has a throw of about 6 mm and 2 M^2 mounting The major difference with this board is that it brings holes on the body. The wire lead is about 2" long and is out the DTR pin as opposed to the RTS pin of the terminated with a 2-pin JST PH connector. FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be Price Each 1 downloaded without having to hit the reset button. SFA-202 Small Solenoid 5 V $4.95 This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN corre- Breadboard Mini Self-Adhesive Red spond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI This is a very small breadboard with 170 tie points. This basic board with your Arduino target. bread board is compatible with the Arduino Proto Shield. Strong, self-adhesive backing. Measures 1.8” x 1.4” This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Price Each 1 5+

ARD-070 Breadboard mini self-adhesive red $5.27 less 10% Price Each 1 5+

ARD-010 FTDI Basic breakout 3.3 V $21.50 less 10% Breadboard Clear Self-Adhesive

Breakout for MAX7456 On Screen Display Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, This is a breakout board for the Maxim MAX7456 mono- and 10 rows - a total of 400 tie in points. All pins are chrome on-screen display chip. The board is set up with spaced by a standard 0.1". The two sets of five rows are all supporting circuitry and RCA connectors to allow the separated by about 0.3", perfect for straddling a DIP user to easily interrupt and overlay text and/or graph- package over. The board accepts wire sizes in the range ics onto a video signal (PAL or NTSC). Supplied sample of 29 to 20 AWG. This board also has a self-adhesive on code runs on an ATMega168/328 (16MHz) and compiles the back. The boards also have interlocking parts, so you with WinAVR, so it’s just about “plug-and-play” with an can hook as many together as you'd like. Arduino board.

Price Each 1 5+ Price Each 1 5+ SFA-005 Breadboard Clear self-adhesive $6.50 less 10% SFC-020 Breakout for MAX7456 on screen display $46.00 less 10%

DS3234 Real Time Clock Breakout Remote & GSM Controllers The RTC maintains seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted Infra Red Relay Controller Board for months with fewer than 31 days, including corrections of leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM This kit allows you to turn on and off a va- indicator. Two programmable time-of-day alarms and a programmable riety of electrical devices using almost any square-wave output are provided. The underside of the board holds a 12 household infrared remote control unit (e.g. mm coin-cell battery holder for battery backup. TV, video, satellite, hi-fi, etc). Relay output Note: These do not include a battery. rated at 12 VDC 5 A or 240 VAC 3 A. Features: If you wish to switch heavier loads use our DIN mounted relays. Push • ±2 ppm accuracy any button of the remote control and the PCB mounted relay will turn on. • Two alarms Push any button a few seconds or hours later and the relay will toggle off. • SPI output Power Supply of 8 to 15 VDC is required. • Low power consumption • Accurate calendar up to year 2100 • Battery backup included Price Each 1 5+ KIT-058 Infra Red Relay board controller as kit $21.95 less 10% Price Each 1 5+ KTA-058 Infra Red Relay board controller asembled $35.50 less 10% SFC-011 DS3234 Real time clock breaout $20.00 less 10%

Ocean Controls Catalogue 2012 Page 31 OCEANREMOTE & GSMCONTROLS CONTROLLERS

Infra Red 12-Channel Relay Board Controllers Kit Rolling Code 2/4/10 Channel UHF Relay Board This kit comprises a commercial 14-button IR remote controller PLUS a 12 A state of the art UHF remote control almost impossible to crack. Uses channel relay board. All 12 relays are provided a pre-built ‘keyfob’ style transmitter (as used in many car lock systems) on the receiver board - nothing more to add. with 2 pushbuttons, one for each relay on the matching receiver board. Makes it very simple to add infrared remote con- Each relay can be either latching or momentary in operation. An LED for trol to any project or existing equipment. each relay indicates when it is operated. The receiver board uses a pre-built UHF 433 MHz receiver module to The 12 relays are grouped into 2 groups of 8 decode the transmitter signal. Up to 15 transmitter units can be learnt and 4. Each group of relays can be set to oper- by one receiver unit, 12 VDC plug pack required. The code 4 channel has ate as toggling or momentary. Buttons 1 to 12 4 pushbuttons, one for each relay on the matching receiver board. Still on the remote control operate the corresponding using the same Tx/Rx pair as the 4 channel controller but it uses all 10 relay on the receiver board, ie. button 1 operates relay 1, etc. Buttons 13 defined keypress. Buttons 1, 2, 3, and 4 (of course) and the buttons 1 and 14 are used to turn off each group of relays. & 2, 1 & 3, 1 & 4, 2 & 3, 2 & 4, and 3 & 4 pressed together. The relay contacts are rated at 10 A max. However the PCB traces will only handle about 5 A - additional heavy duty wire will need to be soldered from the relay contact to the screw terminal connector to handle the full 10 A. The relay outputs are also rated to switch up to 240 VAC mains voltages. Extreme care should be taken when switching mains voltage. Don't do this unless you are experienced and know exactly what you are doing. Mains voltages can be lethal!

Price Each 1 5+

KIT-142 Infra Red 12-Channel Relay controllers kit $95.00 less 10% Price Each 1 5+ KTA-142 Infra Red 12-Channel Relay Controller $114.00 less 10% Assembled KIT-157 As kit with transmitter $69.95 less 10%

RIR-101 12 Button remote control $20.00 less 10% KTA-157 Assembled and Tested $89.95 less 10% KTT-157 Additional Transmitter $28.00 less 10%

Remote Controlled Mains Outlets KIT-180 As kit with Transmitter $75.00 less 10%

Allows remote control of just about any appliance in KTA-180 Assembled and Tested $95.00 less 10% the home! This 8 channel mains switching package is suitable for switching up to 1000 W. This makes it KTT-180 Addtional Transmitter $29.50 less 10% perfect for automating devices around the home at the KIT-181 As kit with Transmitter $99.00 less 10% touch of a button. KTA-181 Assembled and Tested $129.00 less 10% Extra mains switches are available allowing up to 8 mains outlets to be controlled remotely. The RF signal KTT-181 Additional Transmitter $29.50 less 10% used means you don’t even need to be in line-of-sight to the outlet unlike some infra-red models available on the market. Please check power consumption of your appliances before making your purchase Tx and Rx Modules Used in KTA-157 & KTA-180 Same 2 button/ 4 button transmitters and receivers used in our rolling Price Each 1 5+ code 2 channel / rolling code 4 channel 434 MHz UHF relay board. Bat- UHF-010 UHF Remote control mains outlet $27.23 less 10% tery is already fitted into the transmitter. Dimensions 73 x 100 x 25 mm, Antenna Protrudes 86 mm UHF-011 1 Additional UHF mains outlet $20.85 less 10%

1 Channel UHF Relay Controller Module 2 Channel UHF Relay Controller Module This mains powered unit can switch 240 VAC at 6 A via its inbuilt relay. Up to 10 remotes can be taught to control the unit. The re- Price Each 1 5+ ceiver can operate in 4 modes, On/Off, Latched, Momentary and 2 minute Timed operation. KTT-157 A17-Tx 2 channel UHF Transmitter $28.00 less 10% The 2 channel module has 2 Relays rated to 2 A at 24 VDC KTR-157 A17-Tx 2 channel UHF Receiver $25.00 less 10% and an NPN Transistor Output. Each Relay can be set to KTT-180 A16-Tx 4 channel UHF Transmitter $29.50 less 10% operate in 2 second momentary mode or ON-OFF latching mode. Pushing both buttons together operates the Transis- KTR-180 A16-Tx 4 channel UHF Receiver $24.50 less 10% tor Output. Both have an outdoor detection range of 30 m and dimension of 73 x 100 x 25 mm. One remote is supplied with each module order Rolling Code 8-Channel UHF Relay Board The controller is supplied with a 8 button remote transmitter. Up to 15 Price Each 1 5+ transmitter units can be learnt by one receiver unit. UHF-002 1 channel UHF relay controller 240 VAC $141.00 less 10% Press button 1 on the transmitter while simultaneously pressing the LEARN pushbutton on the receiver board. You only have to do this for less UHF-001 2 channel UHF relay Controller 24 VDC $141.75 less 10% than 1 second. After about 15 seconds the two units will internally con- UHF-003 Spare key remote $54.50 less 10% nect and recognize each other. Transmitters 'connected' to any receiver unit can be unattached by pressing the LEARN button continuously for 8 seconds. Relays can be toggled operation or momentary (closed when We have developed the following Software remote button is on) Features: packages which we sell: • SPDT relay contacts rated to 10 A at 250 VAC • ISEE-Modbus and ISEE-Modbus TCP: PC-based and 10 A at 30 VDC HMI software with SCADA features to view, log • 100 m line of sight transmission distance and control Modbus slave devices from your PC. • 12 VDC powered • ViewPID: A control program for graphing and controlling PID controllers from a PC. Price Each 1 5+ KLW-008 Rolling code 8-channel UHF Relay boards $89.95 less 10%

Page 32 Ocean Controls Catalogue 2012 OCEANREMOTE & GSMCONTROLS CONTROLLERS

Rolling Code 15-Channel UHF Relay Board Wireless Back To Back Controller The controller is supplied with 15 button remote transmitter. Up to 15 We have now reprogrammed our KTA-235 Remote Telemetry Unit or RTU transmitter units can be learnt by one receiver unit. to operate as a back to back controller. Press button 1 on the transmitter while simultaneously pressing the The KTA-238 has 4 isolated digital inputs, 2 non LEARN pushbutton on the receiver board. You only have to do this for less isolated 0-5V digital inputs and 6 relay outputs. Two than 1 second. After about 15 seconds the two units will internally con- KTA-238's are connected by a communications link. nect and recognize each other. Transmitters 'connected' to any receiver The link can be RS-232, RS-485 or wireless. The status of the inputs for each controller are automati- unit can be unattached by pressing the LEARN button continuously for 8 cally transmitted to the other controller where they seconds. are written to the relay outputs. Features: When an input on a controller changes the control- • Relays can be toggled operation or momentary ler sends a command #RXX to the other controller. (closed when remote button is on) The value XX is a binary copy of its inputs. For example 07 means inputs • Relays contacts SPDT 1,2 and 3 are on and input 4 is off. The receiving controller copies the • Relays rated at 10 A @120 VAC/ 20 A @14 VDC XX value to relays. Thus the value 07 means relays 1,2 and 3 are on and • Transmission distance 100 m line of sight. relay 4 is off. • Rolling code operation. Will not interfere with other units The receiving controller then reads its inputs and transmits back #IYY where YY is a binary copy of its inputs Also each controller calculates a • 12 VDC powered random time interval. When the interval has elapsed it sends the #RXX command to the other controller. Price Each 1 5+

KLW-015 Rolling code 15 channel UHF relay board $129.00 less 10% Price Each 1 5+

KTA-238 Wireless back to back controller $179.00 less 10% Pack of 12 Single UHF Relay Boards and remote KTA-239 Serial Back to back controller $129.00 less 10% Imagine being able to install 12 relay boards around your house. One relay to control backyard lights, another relay a pump for the fish pond, another GSM Controller RTU5010/ RTU5011 for driveway lighting etc and each relay The GSM Controller RTU5010 is a universal GSM dialer controlled by a button on a 12 button wire- and controller as well as a GSM Remote Control and less remote. Alarm Unit. It provides 4 open collector or NPN out- This pack contains 12 UHF single channel puts(12 V to 24 V), 4 digital inputs and a RS-232 Serial relay boards using rolling code technology Port. It allows you to monitor and control an alarm which is almost impossible to 'crack'. A 12 button remote is supplied with or remote stations or equipment and machinery by each button controlling a relay. The remote is fitted with an extendable SMS(Short Message Service). aerial which allows up to 100metre line of sight wireless operation. A Also it allows serial data to be transferred between the link on the board allows you to choose whether you want each individual user and a remote PLC, controller or instrumentation. Finally, it can trans- relay operation to be either latching or momentary in operation. The relay mit data from apparatus (thermometer, humidity meter, electric meter, boards are fitted with a pre-built 434MHz UHF receiver module to decode flowmeter) to the user or monitoring center by SMS(GSM DTU). the transmitter signal. Apart from I/O differences the other functions are the same for both mod- The controller is supplied with a 12 button remote transmitter. Up to 15 els. The RTU5011 provides 8 open collector or NPN outputs(12 V to 24 V), transmitter units can be learnt by one receiver unit. Press button 1 on 8 inputs, 4 Analog Inputs and a RS-232 Serial Port. the transmitter while simultaneously pressing the LEARN pushbutton on the receiver board. You only have to do this for less than 1 second. After about 15 seconds the two units will internally connect and recognize each other. Transmitters 'connected' to any receiver unit can be unattached by pressing the LEARN button continuously for 8 seconds. Price Each 1 5+

KPR-001 GSM controller RTU5010 (4 I/O Ports) $315.00 less 10%

Price Each 1 5+ KPR-002 GSM controller RTU5011 (8 I/O ports, 4 $365.00 less 10% AD Inputs) KLW-021 Pack of 12 single UHF Relay Boards and $299.95 less 10% remote RTU5000 GSM RTU Remote Telemetry Unit The RTU5000 is a universal GSM dialer and controller as well as a GSM Remote Control and Alarm Unit. The RTU5000 is a universal GSM dialer The KTA-235, KTA-236 and KTA-237 are an ASCII based easy to use and controller as well as a GSM Remote Control and Alarm Unit. It pro- Remote Telemetry Unit or RTU. It is designed to be used with a PC or PLC, vides 2 open collector or NPN outputs, 4 digital inputs (1 of which can be where the PC or PLC can remotely control and monitor the status of 6 used as a 23 bit counter), 1 analog input and an RS-232 serial port. It Relays, 4 optically isolated inputs and 2 Analog inputs. allows you to monitor and control an alarm, remote stations, equipment The Analog inputs can also be set to behave as dry contact or open collec- and machinery by SMS. The serial port allows data to be transferred be- tor digital inputs in cases where analog inputs are not required. Each unit tween the user and a remote PLC or serial sensor device as a GSM modem is individually addressable, which means that multiple controllers can be or by SMS. used on the serial link, and the option of a serial modem means that units Features: can be wirelessly controlled up to 1000m from the host. • Can read logic input status by SMS; • 1 of the 4 digital inputs can be used as a counter. The The RTU comes in 3 forms: channel can be activated by a pre-setting value (time • KTA-235 communicates via an RS-232 serial or quantity). If there is overflow, it will loop connection. This connection can be multid- • When System initialization complete (by power sup- ropped using a combination of diodes and ply or battery), will send the SMS to SMS recipient 1 resistors • When power supply returns on/off, while supported by back-up bat- • KTA-236 using a UM96 (9600 baud) wire- tery, will send the SMS to SMS recipient 1 less modem card. A distance of 500 m can be achieved via direct line of sight. • Up to 4 mobile phones numbers can be pre-set as SMS Alarm number • KTA-237 using a UM12 (1200 baud) wireless • Up to 4 phone numbers can be pre-set as auto dialing Alarm number modem card. A distance of 1000 m can be • Password protected, prevents unauthorized user. achieved via direct line of sight. • Can be set up and programmed from any GSM phone or PC through RS-232 Cable Price Each 1 5+ • Time stamped alarm messages.

KTA-235 Serial Remote Telemetry Unit $129.00 less 10% Price Each 1 5+ KTA-236 Wiresless Remote Telemetry Unit 9600 $179.00 less 10% Baud KPR-003 RUT5000 GSM RTU alarm $249.00 less 10% KTA-237 Wireless remote telemetry unit 1200Baud $179.00 less 10%

Ocean Controls Catalogue 2012 Page 33 TEMPERATUREOCEAN & PROCESSCONTROLS CONTROLLERS

RTU5015 GSM Gate or Garage Door Opener Small Heating/Cooling Thermostat The GSM Gate Opener RTU5015 is a very simple con- Dead-simple DIN-rail mount thermostat usually used to switch a cooling troller designed for authorised door access, controlling fan on or off, or heating up a heater in an electronics cabinet. The nor- gates, switching of remote equipment and car parking mally open contacts switch closed when the temperature rises above the systems. The RTU5015 can be used in any application set point. Can also be used as a simple over-temperature sensor. which requires turning ON/OFF your system, machine or equipment remotely. Features: • Switch Hysteresis: 7 °C Features: • Sensor Element: Thermostatic bimetal • Simple control of garage doors and entry gates • Contact Type: Snap-action contact • No call charges. The controller checks the called ID • Contact Resistance: <10 mΩ against a list of authorised numbers and activates the output on the • Service Life: >100,000 cycles first ring without "picking up" the call • Max. Switching Capacity: • Uses the GSM network and can be operated from anywhere with -- 250 VAC, 10 A mobile phone coverage -- 120 VAC, 15 A, • Configurable via SMS. Settings can be changed and authorised num- - DC 30 W bers added or removed with simple SMS commands - • Connections: 2-pole terminal, 2.5 mm² • Up to 64 authorised phone numbers can be configured • Mounting: 35 mm DIN rail • Two digital inputs for door sensors or motion sensors to protect your door and windows • Casing: UL94 V-0 Plastic, light grey • Siren or Strobe output and SMS alert function for notification of door • Dimensions: 60 × 33 × 43 mm opening or movement not triggered by an authorised call • Operating Temperature: 0 to 60 °C • One output with relay rating 3 A, 240 VAC for connecting the switch • Ingress Protection Rating: IP20 of the door or machines. Price Each 1 5+

Price Each 1 5+ HEC-005 Small Cooling thermostat (blue button of $29.95 less 10% the above picture) KPR-004 RTU5010 GSM Gate or garage door $199.00 less 10% opener HEC-010 Small Heating thermostat (red button of $29.95 less 10% the above picture) GM-01 GSM GPRS Modem N322 Temperature Thermostats The GSM modem is a self-contained E-GSM/GSM-GPRS 900/1800 dual- band modem and is GPRS class 10 capable. It is based on a SIMCOM The Novus N322 Thermostats can be used with NTC Thermistors, PT100 SIM300 module. Standard AT commands drive the modem. This GSM/ and thermocouples. The N322 thermostats have two relay outputs which GPRS modem supports the following transmissions: can be configured for heating or cooling or a number of different alarm -- Data, Fax, SMS (Point to point and Cell Broadcast), Voice calls modes and are easily configured by the front panel buttons and display. Features: The temperature and status of relays are shown on the LED display. Great • External antenna (SMA connector) included for aquariums, home brewing and many other applications. The NTC • RS-232 Serial (via 9-pin female D connector) thermistor model is provided with a waterproof NTC thermistor on a 2 m • 12 VDC Power supply (via 2.5 mm DC power long cable to get you up and running immediately. Cable can be easily jack) extended to 50m upon request. Temperature accuracy of ±0.6 °C • SIM card holder • 2 Watt EGSM 900 radio section Features: • 1 Watt GSM1800 radio section • IP65 when mounted in panel • Echo Cancellation + noise reduction • Heating or cooling actions • Full GSM or GSM / GPRS software stack • Configurable hysteresis and output delay and minimum times • Hardware GPRS class 10 capable • Over / under temperature and in-bound / out-of-band alarms • Shielded aluminium enclosure • Optional multi-level password protection Specifications: Price Each 1 5+ • Power supply: 100 to 240 VAC KPR-005 GM-01 GSM GPRS Modem $269.00 less 10% • Display : 3 digit LED • Sensor input : NTC (included) • Temperature range : -50 to 120 °C • Output 1 : SPDT, 1 HP (16 A resistive), Temperature & Process Controllers 250 VAC • Output 2 : SPST, 5 A resistive, 250 VAC • Sampling time : 1.5 samples per second Room Temperature Thermostat Controller Specifications: The RTC86 is a simple to use thermostat. It is used for 2 position control • Warm-up: 15 minutes with a ON/OFF output for the control of the temperature by means of an • Temperature resolution: 0.1º (–19.9º and 119.9º) NTC thermistor sensor placed internally in the thermostat. The thermostat • RH resolution: 1% will activate when the temperature falls below the selected setpoint. • OUTPUT1 Relay: SPDT, 1 HP 250 VAC / 1/3 HP 125 VAC (10 A Resis- tive) Features: • OUTPUT2 Relay: SPST, 3A / 250 VAC • LED indicator is lit when heating is on • Power: 100 to 240 VAC (± 10 %) • Manual knob • Mains frequency: 50 to 60 Hz • Rated Voltage: 230 VAC ±10% • Power consumption: 5 VA • Current Switching: 16 A • 5 W COnsumption • Setting Range: 5 to 50 °C Price Each 1 5+ • LED indicator is lit when heating is on • Manual knob for easy operation CET-001 N322 NTC thermistor electronic thermo- $79.00 less 10% • Inbuilt NTC thermistor sensor stat • On/off control CET-002 N322 Pt100 electronic thermostat $99.00 less 10%

The thermostat is designed for the control of warm-water floor heating CET-003 N322 J,K,T thermocouple electronic $99.00 less 10% systems and direct electric heating systems. By placing a thermostat in thermostat each room and using them to control the heater or water flow to just that room, each room's temperature can be controlled separately. CET-004 N322 NTC electronic thermostat 12 VDC $79.00 less 10% CET-005 N322 NTC Thermisotr electronic thermo- $99.00 less 10% stat 240 VAC RS-485 Price Each 1 5+

HEC-001 Room Temperature thermostat $19.95 less 10%

Page 34 Ocean Controls Catalogue 2012 TEMPERATUREOCEAN & PROCESSCONTROLS CONTROLLERS

N322T Temperature Thermostats with Timer N322 Relative Humidity and Temperature Controller N322T is a heating or cooling temperature controller, with a timer-control- The N322RHT is a digital controller for relative hu- led outlet for forced defrosting or programmed liquid agitation. It include midity and temperature. Its 2 relay outputs can be inputs for NTC, Pt100, or Pt1000 thermistor type temperature sensors, or configured independently as control or alarm, either for J/K/T type thermocouples, including sensor offset correction capabili- for temperature or relative humidity. A Relative Hu- ties. midity and Temperature or RHT probe (3 m length) is provided along with the instrument. Each sensor type has a specific temperature measuring range that should be observed by the user. The controller includes one control outlet (Out- Features: put1) and one timer outlet (Output2). The NTC Thermistor model is pro- • Controller's Temperature: 0.1º for indications between –19.9º and vided with a NTC Thermistor and 2m long cable to get you up and running 119,9º, 1º elsewhere immediately. The timer output is typically used for the system defrost. • Controller's RH Resolution: 1% The t1 and t2 parameters define, respectively, the interval and duration of • Warm up: 15 minutes the defrost cycles. IP65 enclosure frontal protection • OUTPUT1: Relay SPDT; 1 HP 250 Vac / 1/3 HP 125 Vac (10 A Resis- tive) Sensor Input: • OUTPUT2: Relay: 3A @250 Vac, SPST • Output: 10 A control relay and 3 A alarm • RS-485 digital communication; RTU MODBUS protocol (optional) relay • Power Supply: • Resolution: 0,1 °C from -19,9 to 199,9 °C -- 100~240 Vac (± 10 %) or optional 24 Vdc/ac (12~30 Vdc/ac) • Operating temperature: 0 to 40 °C -- Mains frequency: 50 ~ 60 Hz. Power consumption: 5 VA • Power supply: 100~240 Vac/dc (± 10 %) or • PANEL CUT-OUT: 70 x 29 mm optional 24 Vdc/ac (12~30 Vdc/ac) • RS-485 digital communication; RTU MODBUS Price Each 1 5+ protocol (optional) CET-109 N32RHT Temperature and RH Controller $195.00 less 10% Price Each 1 5+ 240 VAC

CET-006 N322T NTC timer 240 VAC $109.00 less 10% CET-108 N322RHT Temperature and RH controller $195.00 less 10% 24 VDC CET-008 N322T NTC Timer with RS-485 240 VAC $114.00 less 10% CET-107 Replacement Probe for N322RHT control- $109.00 less 10% ler N323R Temperature Thermostats This model of temperature controller controls the end of defrosting by N321S RS-485 Differential Temperature Controller temperature. It features three output relays: compressor, defrosting and The N321S is a controller for solar heating ap- fan. It operates with two sensors, one for room temperature and other to plications. It typically commands a water circula- be attached to the evaporator for control of defrost end. Employed in cool- tion pump through the temperature differential ing and defrosting. IP65 enclosure frontal protection between the solar collector and the thermal Features: reservoir or pools. • Sensor input: Thermistor (-50 to 120 ºC), Pt100 (-50 to 300 °C), Thermocouple J (0 to 600 °C). The controller has two inputs for NTC-type temperature sensors (supplied • OUTPUT1: Relay SPDT; 1 HP 250 Vac / 1/3 HP with the controller) and one control output for activating the water circula- 125 Vac (10 A Resistive) tion pump. RS-485 serial and the Modbus RTU protocol allow the N321S to • OUTPUT2: Relay: 3A / 250 Vac, SPST be queried or controlled from a PC, PLC or SCADA system. • OUTPUT3: Relay: 3A / 250 Vac, SPST Resolution: 0,1 °C from -19,9 to 199,9 °C Features: • Operating temperature: 0 to 40 °C • Control Output: One SPDT relay outlet, 1 HP(16A resistive)/ 250 Vac • Power supply: 100~240 Vac/dc (± 10 %) or 24 Vdc/ac (12~30 Vdc/ • Display: 3½ Digit LED Display ac) • Accuracy: 0.6 °C (NTC) • RS-485 digital communication; RTU MODBUS protocol (optional) • Resolution: 0.1 °C from -19.9 to 199.9 °C • Power Supply: 100 to 240 VAC or VDC ±10%, 50 to 60 Hz, 5 VA

Price Each 1 5+ Price Each 1 5+ CET-030 N322R NTC Defrost 240 VAC $109.00 less 10% CET-031 N321S RS-485 240 V differntial Temp. $89.00 less 10% Controller N323-RHT-485 Temperature & RH Controller w/RS-485, 24 VDC, 240 VAC CET-032 N321S RS-485 12 to 24V Differential $89.00 less 10% controller The N322RHT is a digital controller for relative humidity and temperature. Its 2 relay outputs can be configured independently as control or alarm, either for temperature or relative humidity. RHT sensor probe with 3 me- Replacement Temperature NTC Probe for N321S/N322 tre cable included. Bright, 3.5 digit LED display Controller Relay outputs can drive fans, compressors, pumps, heaters etc. to control Replacement Temperature NTC Probe for the temperature and humidity. The controller has N320, N321S, N322 and N323 Controller. an RS-485 port and communicates via Modbus Length of cable 3m and water proof. RTU, allowing integration into building management or logging systems.

Specifications: Price Each 1 5+ • Power: 12 to 30 VAC/DC • Warm-up: 15 minutes CET-029 Replacement Temperature NTC sensor for $10.95 less 10% • Controller's Temperature resolution: 0.1º (–19.9º and 119.9º) N321S/N322 Controller • Controller's RH resolution: 1% • Adjustable hystereses and configurable setpoint minimum and maximum limits • IP65 when installed in a panel Ocean Controls provides engineering de- • RS-485 Modbus communications sign, software solutions, support and training

for the industrial and technical sector. Using Price Each 1 5+ structured methodologies and procedures CET-112 N323-RHT Temp & RH Controller w/RS- $209.00 less 10% 485, 24VDC we can provide a complete reliable system CET-113 N323-RHT Temp & RH Controller w/RS- $209.00 less 10% to suit your needs 485, 240 VAC

Ocean Controls Catalogue 2012 Page 35 TEMPERATUREOCEAN & PROCESSCONTROLS CONTROLLERS

N321S Differential Temperature Controller N1020 PID Temperature Controller The N321S is a controller for solar heating applications. It typically The sophisticated auto-adaptive PID algorithm continuously adjusts the commands a water circulation pump through the temperature differen- PID parameters for best controlling performance. tial between the solar collector and the thermal reservoir or pools. The controller has two inputs for NTC-type temperature sensors (supplied with The programmable input accepts a range of thermo- the controller) and one control output for activating the water circulation couples, PT100 RTDs or a 0 to 50 mV signal. pump. Two outputs are available - one relay output and Features: one pulse output for interfacing to an SSR for fully- • Control Output: One SPDT relay outlet, 1 variable control. HP(16A resistive)/250Vac The Novus N1020 PID controller features advanced performance capability • Display: 3½ Digit LED Display for the most complex and critical applications and 1/32 (48 × 24 mm) • Accuracy: 0.6 °C (NTC) DIN size for mounting in space-critical applications. • Resolution: 0.1 °C from -19.9 to 199.9 °C • Power Supply: 100 to 240 VAC or VDC ±10%, 50 to 60 Hz, 5VA Features: • Full range power supply: 100 to 240 VAC and 24 to 300 VDC • High brightness red LED display Price Each 1 5+ • Universal input: thermocouples, Pt100 RTD and 50 mV CET-033 N321S Differential Temperature controller $79.00 less 10% • Dual output: 1 pulse and 1 relay 240 VAC • Output funtions: control, alarm 1, alarm 2 • Configurable alarms with 8 different functions CET-034 N321S Differential Temperature Controller $79.00 less 10% • Alarm inhibit function at start up 12 to 30 VDC • Programmable timer • Measured value offset • Minimum and maximum limits for SP setting RT28U On/Off Temperature Controller and Universal • Minimum and maximum limits for output value Analog Input • Programmable PWM cycle from 0.5 seconds to 100 seconds Front panel: IP65, polycarbonate UL94 V-2 THe RT28U is a programmable thermostat control- • Enclosure: IP20, polycarbonate UL94 V-2 ler with a universal analog input that accepts a wide • CE certification range of sensor types and two independent relay outputs. Although primarily designed for temperature control it can be used for ON-OFF control of level, Price Each 1 5+ pressure etc. NOC-301 N1020 PID Temperature controller $129.00 less 10% Each relay has independent settings for setpoint, hysteresis, cooling or heating action and on time. Each output can be set to a pulse mode where the relay N480 Process Controller constantly toggles on and off when the temperature The N480D series of PID temperature controllers was exceeds (or falls below) the setpoint. This product designed for new users, combining extreme simplic- doesnt come with a sensor. ity in operation with high performance only found in Features: expensive high end controllers. • Universal analog input accepts a wide range of It accepts J,K and S thermocouples and Pt100 RTD, temperature sensors features a relay and pulse output for driving solid state • Cold junction compensation for thermocouples, line compensation for RTDs relays and optionally can be supplied with a linear 4 to • 2 Relay outputs rated to 5 A, 250 VAC 20 mA output. Autotuning PID function, dual display, • ≤0.3% full span measurement error full range universal power supply and ramps soak function are standard.It • ≤0.02%/ºC Temperature drift greatly surpasses the old and obsolete analog controllers in performance • Heating or cooling actions with ease of operation. • Configurable hysteresis and output delay and minimum times Features: • 24 VDC, 30 mA auxiliary supply to power sensors • Cold junction compensation. • Accepts thermocouples type Price Each 1 5+ -- J range -50 ºC to 760 ºC -- K range -90 ºC to 1370 ºC CMC-001 RT28U Temperature Controller, 240 VAC $159.00 less 10% -- T range -100 ºC to 400 ºC CMC-005 RT28U DIN Rail Mount Temperature Con- $159.00 less 10% -- R range 0 to 1760 ºC troller, 240 VAC -- S from 0 to 1760 ºC -- E range -30 a 720 ºC CMC-002 RT28U Temperature Controller, 12 to 24 $159.00 less 10% -- N range -90 a 1300 ºC VAC/VDC • Accepts 2 or 3-wire Pt100 RTD, range -200 ºC to 530 ºC, with cable resistance compensation. CMC-006 RT28U DIN Rail Mount Temperature Con- $159.00 less 10% • Four-digit 10 mm red display for measured variable and four-digit 7 troller, 12 to 24 V mm green display for setpoint. • Sampling rate: 5 measurements per second. • Control output update: 200 ms. In 1592, Galileo invented the first docu- • 5 Vdc 20 mA logic control output. • 1 SPDT relay and 2 SPST 3A @ 250 Vac relays. mented air thermometer, which consists • Power: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vdc/ac. • Power consumption: less than 9 VA. of a glass bulb attached to a long tube. • Front panel: IP65, Polycarbonate UL94 V-2. • Back panel: IP30, ABS+PC UL94 V-0.

In 1714, Daniel Gabriel Fahrenheit invented Price Each 1 5+

both the mercury and alcohol thermometer. CET-050 N480D 2 Relays, Pulse Out, 240 V $139.00 less 10%

CET-051 N480D 2 relays, pulse out 24 V $139.00 less 10%

This type of thermometer wasn't as sensitive CET-052 N480D 3 relays, 240 V $139.00 less 10%

as Galileo's air thermometer, but because the CET-053 N480D 2 relays, Pulse, Analog Out, 240 $152.50 less 10% mercury was sealed, the readings weren't VAC affected by the atmospherice pressure. CET-054 N480D 2 Relays, Pulse, Analog Out, 24 V $152.50 less 10%

Page 36 Ocean Controls Catalogue 2012 TEMPERATUREOCEAN & PROCESSCONTROLS CONTROLLERS

N1200 PID Controller N1100HC Heat/Cool Process Controller The N1200 is an advanced self-adaptive PID controller The N1100HC Heat/Cool Process Controller is a real break- with an algorithm that constantly monitors the proc- through in versatility for holding in one single instrument all ess performance and adjusts PID settings in order to the major features that are needed for the vast majority of always obtain the best possible control response. industrial processes. Features: A Modbus RTU RS-485 is an optional extra. With a RS-485 • Accepts thermocouples J, K, N, R, T, S, B, E, Pt100 interface you can use our ViewPID Software to help you RTD, 0 to 20 mA, 4 to 20 mA, 50 mV, 0 to 5 Vdc monitor, tune and record the performance of the controller. and 0 to 10 Vdc. • Internal resolution: 32,767 levels (15 bits). Features: • Displayed resolution: 12,000 levels. • Universal Input accepts: Thermocouples J, K, T, S, Pt100, 4 to 20 mA, • Dual LED display: red upper display for PV, 10 mm high; green lower 50 mV, 0 to 5 Vdc display for SV, 8 mm high. • Double LED display: red for PV and green for SV. • Sampling: up to 55 measurements/second. • Outputs: 3 A @250 Vac Relay, linear 4 to 20 mA and logic pulse for • Control output update: up to 20 ms. solid state relays available. • Isolated 4-20 mA output with up to 32,000 resolution levels (15 bits), • 2 alarms (Relays SPST) more Out linear 4 to 20 mA or logic pulse 550 ohms maximum load. (standard). • 2 SPST relays 1/5 A @240 Vac/dc and 1 SPDT relay (optional) • Up to 2 time relays, 0 to 6500 seconds. • Power supply: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vac/dc. • Power: 85 to 264 Vac, 50/60 Hz. • Protection: NEMA 4 front bezel (IP65), PC UL94 V-2, case IP20, ABS • Front panel: IP65, Polycarbonate UL94 V-2. + PC UL94 V-0. • Back panel: IP30, ABS+PC UL94 V-0. • Protection: NEMA 4 front bezel (IP65), PC UL94 V-2, case IP20, ABS + PC UL94 V-0. • Rated CE and UL. Price Each 1 5+ PID-051 N1100-HC Heat/Cool Controller 240 VAC $209.00 less 10% Price Each 1 5+ PID-052 N1100-HC Heat/Cool Controller 24 VDC $209.00 less 10%

PID-040 N1200 Self Adaptive controller, 24 V $229.00 less 10% PID-053 N1100-HC Heat/Cool controller 240 VAC $229.00 less 10% PID-041 N1200 self adaptive controller $229.00 less 10% 3 relays

PID-042 N1200 self adaptive controller 3 relays, $289.00 less 10% PID-054 N1100-HC Heat/Cool controller 24 VDC $229.00 less 10% RS-485 3 relays

PID-043 N1200 self adaptive controller 3 relays, $289.00 less 10% PID-055 N1100-HC H/C controller 240 VAC 3 $259.00 less 10% RS-485, 24 V relays, RS-485 PID-056 N1100-HC H/C controller 24 VDC 3 relays, $259.00 less 10% RS-485 N1100 Process Controller The N1100 series of Universal Process Controllers is a real breakthrough in versatility for holding in one single instru- N2000 Process Controller ment all the major features that are needed for the vast The N2000 Universal Process Controller is a real breakthrough in versatil- majority of industrial processes. ity for holding in one single instrument all the major features required in From the very simple applications as a temperature con- the vast majority of industrial processes. troller to the most complex systems of distributed control The N2000 accepts configuration of both input signal and with PLCs or SCADA networks, the N1100 is the right control output through the front keyboard. Power supply for answer to your needs for industrial, building or laboratory automation remote loop powered transmitters is standard and is a must Features: for high-end applications. • Universal Input accepts: Thermocouples J, K, T, S, Pt100, 4 to 20 mA, The N2000S is specific for applications in controlling servo 0 to 50 mV, 0 to 5 Vdc motorised valves, servo actuators and dampers by means of • Double LED display: red for PV and green for SV. two time proportional relays. Power Range of 85 to 250 Vac, • Outputs: 3 A @250 Vac Relay, linear 4 to 20 mA and logic pulse for solid state relays available. 50/60 Hz; optional 24 Vdc/ac. • 2 alarms (Relays SPST) more Out linear 4 to 20 mA or logic pulse Features: (standard). • Universal Input accepts thermocouples type J, K, T, N, R, S; Pt100 • Up to 2 time relays, 0 to 6500 seconds. RTD, linear 4 to 20 mA, 0 to 50 mV, 0 to 5 Vdc. • Input resolution: 12,000 levels. • Double LED display: red for PV and green for SV. • PV or SP retransmission in 4 to 20 mA. • Dual SPST 3 A @250 Vac relays and dual SPDT 5 A @250 Vac relays • RS-485 comm with Modbus RTU protocol (optional). can be individually programmed for control or alarm. • Auto tuning PID control. • Isolated 4 to 20 mA output with 1500-level resolution, maximum 550 • Programmable Soft start up to 9999 seconds. ohm load for control or PV/SV retransmission. It can also be config- • Ramp and Soak: 7 programs of up to 7 segments each. Can be linked ured for digital input or output (10 Vdc @20 mA). to create longer programs of up to 49 segments. • Sampling rate: 4 measurements per second. • Power: 85 to 264 Vac, 50/60 Hz. • Ramp and Soak: 7 programs of up to 7 segments each. Can be linked • Front panel: IP65, Polycarbonate UL94 V-2. to create longer programs of up to 49 segments. • Back panel: IP30, ABS+PC UL94 V-0. • Measured value resolution: 12,000 levels. • Control output update: 250 ms. • Front panel: IP65, Polycarbonate UL94 V-2. Price Each 1 5+ • Back panel: IP30, ABS+PC UL94 V-0.

PID-001 N1100 process controller $189.0 less 10%

PID-002 N1100 Process controller with RS-485 $215.00 less 10% Price Each 1 5+

PID-003 N1100 Process Controller 24 V $189.00 less 10% PID-010 N2000 Process controller with RS-485 $259.00 less 10%

PID-004 N1100 Process controller 24 V with RS- $215.00 less 10% PID-011 N2000 PID controllers with RS-485 24 $259.00 less 10% 485 VDC

Ocean Controls reserves the right to charge Visit our website at www.oceancontrols.com. the freight cost to the customer unless oth- au for items that we have on clearance. Stock er arrangements have been pre-arranged. is limited! Ocean Controls uses its preferred carriers unless specifically requested by the customer.

Ocean Controls Catalogue 2012 Page 37 OCEANPLCS CONTROLS & HMIS

N2000S Servo Positioning Controller with RS-485 4 Channel Temperature Monitor & Controller The N2000S is a controller for servo positioners with two control relays; We have reprogrammed the microcontroller in the one to open and other to close the valve/damper. It has an analog output KTA-389 to become a standalone 4 channel tempera- that can be programmed to control or retransmit input or setpoint signals. ture ON-OFF Controller. It can operate connected Its universal analog input accepts most industry manufactured sensors to a PC providing measurement from four DS18S20 and signals. The N2000S accepts configuration of both input signal and temperature sensors and allowing control of 4 relays. control output through the front keyboard without any internal hardware In addition the unit can be programmed to operate change. Power supply for remote loop powered transmitters is standard the relays automatically in response to temperature and is a must for high-end applications. changes. Features: The controller can do both heating and cooling. KTA389 features four tem- • Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac perature inputs using the DS1820 digital sensor. In addition four relays • Universal Inputs: have been added to provide output control. Supplied with plastic case and -- Thermocouple types J, K, T, N, R, S front/rear panels for a professional looking finish. -- Pt100 RTD -- Linear 4 to 20 mA Price Each 1 5+ -- 0 to 50 mV or 0 to 5 VDC • Two alarm outputs, 4 function digital input KTA-390 Serial Temperature controller assembled $145.00 less 10% • 4 to 20 mA or 0 to 20 mA analog output for Process Variable or SetPoint retransmission KIT-389 Serial Temperature monitor kit $115.00 less 10% • RS-485 serial communication with RTU Protocol • Front panel: IP65, Polycarbonate UL94 V-2. KTA-389 Serial Temperature monitor assembled $115.00 less 10% • Back panel: IP30, ABS+PC UL94 V-0. PTP-003 DS18S20 Temperature Transducer $6.50 less 10% • Dimensions: 48 x 96 x 92 mm. Panel cutout: 45.5 x 93 mm. CAB-002 D9 RS-232 Male-Female cable 1.8 metres $8.77 less 10% Price Each 1 5+ PLP-003 12 VDC, 500 mA plug pack $14.55 less 10% PID-020 N2000S Servo positioning controller with $279.00 less 10% RS-485

PID-021 N2000S servo positioning controller 24 V $279.00 less 10% PLCs & HMIs with RS-485 Touchscreen N3000 Process Controller The DOP-Bxxxxxx from Delta Electronics is a great looking HMI touchscreen which easily interfaces to a number of different PLCs and protocols The N3000 Big Digit Universal Process Controller offers in one single including Modbus. The Screen Editor software used instrument all the major features required in the vast majority of indus- to program the screen is free and easy to use. trial processes. The N3000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware Features: change. Remote setpoint input for 4 to 20 mA signal • Display: TFT LCD, 65536 colors • LED Backlight: LED Features: • Power Supply: 24 VDC • Power: 100 to 240 Vac, 50/60 Hz; optional 24 Vdc/ • 3 separate COM ports for multiple communica- ac tion protocols: RS-232 COM1, COM2 RS-485/422, COM3 RS-232 • Accepts thermocouples type J, K, T, N, R, S; Pt100 • IP 65 for the display panel / NEMA4 RTD, linear 4 to 20 mA, 0 to 50 mV, 0 to 5 Vdc. • Built-in RTC • One digital input for dry contact with 5 programma- • Multilingual, recipes 16/32 bits, data collection, trends, alarms and ble functions. more • Dual SPST 3 A @250 Vac relays and dual SPDT 5 A • USB Transparent mode for Delta PLC after USB @250 Vac relays can be individually programmed for control or alarm. • Built to support MPI Siemens S7 PLC • Isolated 4 to 20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be config- • Free software: ScreenEditor Series 1 ured for digital input or output (10 Vdc /20 mA). • Dimensions: 96 x 96 x 92 mm., Panel cutout: 93 x 93 mm. Specs DEI-021 DEI-025 DEI-027 DEI-033 DEI-040 DEI-050

Screen 5.6" 7" 8" 10" Price Each 1 5+ Size

PID-030 N3000 Process Controller 240 VAC with $269.00 less 10% Resolu- 320 × 480 × 234 pixels 800 × 800 × 1024 RS-485 tion 234 480 600 × 600 pixels pixels pixels pixels PID-031 N3000 Process Controller 24 VDC with $269.00 less 10% RS-485 SRAM 128 KB 256 KB 16 MB SD RAM N/A 16 MB 64 MB

TI08-R Programmable Trip Alarm Unit 24 VAC/VDC or 240 Flash 2 MB 4 MB 128 MB VAC Powered ROM TI08-R is a cheap programmable process indicator for DIN- Ethernet N/A 10/100 Base-T connection rail mounting designed for trip-alarm applications. Equipped No. of 4 N/A with a bright 3-digit LED display, this model is especially Function suitable for measuring and controlling various technologi- keys cal values from -199 to 999 with resolution of up to 1000 points. No. of N/A 4 N/A System The device can have up to 2 programmable relays providing keys on/off control/alarm with or without pulse mode. TI08-R accepts various linear input voltage or current signals from 2 and 3-wire transmitters that can be powered internally via the auxiliary power sup- Price Each 1 5+ ply output. The display-to-input correspondence, decimal point position, measurement offset value as well as many other parameters are fully DEI-021 DOP-B05S100 5.6" Touchscreen $499.00 less 10% programmable. The TI08-R comes with a MAB4 DIN rail base which it DEI-025 DOP-B07S201 7" Touchscreen $649.00 less 10% plugs into. DEI-027 DOP-B07S211 7" Touchscreen $649.00 less 10% DEI-033 DOP-B07E415 7" Touchscreen $799.00 less 10% Price Each 1 5+ DEI-040 DOP-B08E515 8" Touchscreen $1049.00 less 10% CMC-020 TI08 Trip Alarm Unit 240 VAC $149.00 less 10% DEI-050 DOP-B10E615 10" Touchscreen $1299.00 less 10% CMC-025 TI08 Trip Alarm Unit 24 VDC/VAC $159.00 less 10%

Page 38 Ocean Controls Catalogue 2012 OCEANPLCS CONTROLS & HMIS

Delta HMI & PLC Communication Cables DVP-28SV11R Programmable Logic Controller DOP Series HMI RS-232 to Delta PLC COM1 RS-232 communication cable The DVP-SV Series is a highly expandable series industrial PLCs. The DVP- (left picture) 28SV11R has expansion ports on both sides. Expansion modules can be mounted on the left (high speed ex- Delta DOP Series USB programming upload/download cable (middle pansion) or right (low speed general purpose modules) picture) of the PLC without external wiring. DVPACAB2A30 DVP Series PLC RS-232 Serial Programming Cable. Use The unit features a rich command set with PID loops it between a serial port on your PC to program a DVP series PLC (right for process control, linear / arc interpolation com- picture) mands and high speed counters. Two small potentiometers on the front of the unit can be read as analog inputs with 8-bit resolution. Speficiations: • Power: 20.4 to 28.8 VDC • Digital Inputs: 2 banks of 8 inputs, 24 VDC sink or source¹ • Digital Outputs: 4 banks of 3 relays with shared commons • Output Rating: 250 VAC / 30 VDC, 1.5 A each relay, 5 A each bank • Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master Price Each 1 5+ or slave • Program Capacity: 16 k steps DEI-101 HMI to Delta PLC Cable $14.94 less 10% • Execution Speed: 0.24 µs per basic instruction • IO Points: Up to 512 via expansion modules DEI-100 DOP Seires HMI USB programming Cable $14.95 less 10% • High Speed Counters: 4 counters, 200 kHz DEC-200 DVP PLC RS-232 Serial Cable $25.00 less 10% Price Each 1 5+ DVP-20SX211R Programmable Logic Controller DEC-025 DVP-28SV11R PLC $399.00 less 10% The DVP-SX2 Series is Delta Electronics' second generation of slimline industrial PLCs. The DVP-20SX211R features built-in analog inputs, analog DVP-32EH00R2 Programmable Logic Controller outputs, high speed counters and pulse outputs, a flexible serial port and expansion ports on both sides. Expansion modules can be mounted on the EH2 series is well equipped with outstanding op- left (high speed expansion) or right (low speed general purpose modules) erational speed, large programming capacity and of the PLC without external wiring. built in application and communication instructions, multiple special extension modules and Two small potentiometers on the front of the unit can function cards, enabling the efficiency of the MPU be read as an additional 2 analog inputs with 8-bit to be utilized to its fullness. resolution. The DVP-20SX211R supports PID loops with automatic tuning for process control applications. Features: • 16 digital inputs and 16 digital outputs (relay) The programming software runs on Windows and is • AC power in freely available for download. Speciciations: Specifications: • MPU points: 16 / 20 / 32 / 40 / 48 / 64 / 80 • Power: 20.4 to 28.8 VDC • Max. I/O points: 512 • Digital Inputs: 8 × 24 VDC sink or source¹ • Program capacity: 16 K Steps • Digital Outputs: 2 banks of 3 relays with shared commons • Instruction execution speed: 0.24 µS (basic instruction) • Output Rating: 250 VAC/ 30VDC, 1.5 A each relay, 5 A each bank • Communication port: Built-in RS-232 and RS-485, compatible with • Analog Inputs: 4 × ±10 VDC or ±20 mA (inc. 4 to 20 mA) MODBUS ASCII / RTU communication protocol • Analog Input Resolution: 12 bit (5 mV / 10 µA)² • Analog Output: 2 × ±10 VDC or ±20 mA (inc. 4 to 20 mA) • Analog Output Resolution: 12 bit (5 mV / 10 µA)² Price Each 1 5+ • Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master or slave DEC-035 DVP-32EH00R2 PLC $499.00 less 10% • Program Capacity: 16k steps • IO Points: Up to 230 via expansion modules DVP-16ES200R Programmable Logic Controller Price Each 1 5+ The DVP-ES2 Series from Delta Electronics is a small PLC for basic se- quential control. It is economical, highly efficient and functional. DEC-005 DVP-20SX211R PLC $369.00 less 10% Specifications: • MPU points: 16 / 20 / 24 / 32 / 40 / 60 DVP-14SS211T Programmable Logic Controller • Program capacity: 16 k steps • Built-in with 3 COM ports: 1 RS-232 port The DVP-SS2 Series is Delta Electronics' second genera- and 2 RS-485 ports, all are able to operate tion of slimline industrial PLCs. The DVP-14SS211T independently (Master/Slave) features high speed counters and pulse outputs, a flex- • Max. I/O points: 256 input points + 16 ible serial port, real-time monitoring and an expansion output points, or 256 output points + 16 bus that allows matching modules to be mounted on the input points right side of the PLC without external wiring. • DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution. The DVP-14SS211T supports PID loops with automatic • Built-in with 8 high-speed input points (2 points for 100 kHz, 6 points tuning for process control applications. The transistor for 10 kHz) and supports U/D, U/D Dir, A/B counting modes outputs allow high speed pulse generation for servo • New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration or stepper motor motion control applications. The • Handy instructions for frequency inverter: For controlling the forward programming software runs on Windows and is freely running, reverse running, RUN and STOP of Delta's AC motor drives available for download. Speficiations: • Power: 20.4 to 28.8 VDC Price Each 1 5+ • Digital Inputs: 8 inputs, 24 VDC sink or source¹ DEC-045 DVP-16ES200R PLC $229.00 less 10% • Digital Outputs: 6 open collector type transistor outputs • Output Rating: 30 VDC, 500 mA each output • Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master or slave Note: Prices listed in the catalogue DO NOT • Program Capacity: 8k steps • IO Points: Up to 238 via expansion modules include GST

Price Each 1

DEC-015 DVP-14SS211T PLC $149.00

Ocean Controls Catalogue 2012 Page 39 OCEANPLCS CONTROLS & HMIS

Analog Input Function Module DVPDT01-S Device Net Communication Module The DVP06AD-S has 6 analog inputs function module for Delta Electronics Device Net Slave communication module for Delta Electronics PLCs type SS/SA/SX/SC/SV. Where as the DVP06XA-S has PLC's. Selectable serial baudrate of 125 k, 250 k 500 k bps. 4 analog input and 2 analog output function module for the same Delte Electronics PLCs type. Specifications: • Transmission method: CAN Features : • Message type: Explicit, I/O polled • Analog input : ±10V or ± 20 mA • Network voltage: 24 VDC (11 to 25 VDC) • Resolution 14bit Voltage Input, 13bit Current Output (4 • Electrical isolation: 500 VDC to 20 mA) Price Each 1 5+

Price Each 1 5+ DEC-130 DVPDT01-S Device Net Communication $289.00 less 10% Module DEC-100 DVP06AD-S 6 Analog Input Function $199.00 less 10% Module

DEC-102 DVP06AD-S 4 Analog Input, 2 Analog $205.00 less 10% DigiGate Profibus-Modbus Gateway Output function module The DigiGate Profibus is ideal for connecting a Profibus DP network with a Modbus RTU network. It works as a gateway, operating as a master sta- Digital I/O Module Slim Series tion in the Modbus network and as a slave station in the Profibus network. The DigiGate will read the data of the slaves on the Modbus network and This DVP-S Series provide 8 to 16 Input and Output points with selectable send the values to the Profibus master. In the same way, it will write number of just input or output or both input and output point expan- at the output of the Modbus slaves according to the Profibus master sion unit. It requires 24 VDC @5 mA. The DVP-S-16-SP-11-R/T offers 8 requests, providing a complete control of the Modbus network devices input and 8 output units for relay output or 8 input and 8 output units through the Profibus network. DIN rail mount option. for transistor output whereas the DVP-S-8-SN-11-R offers only 8 output units for relay output. The units are fitted with LED status Features: indicators. • Operating environment: 0 to 50 °C, 30 to 80% of relative humidity, without condensation Features: • Electrical insulation between the Profibus interface and • Power Consumption: 1 W/ 2 W the rest of the device: 1000 Vac • Responding Time: ~ 10 ms • Power supply: 10 a 35 Vdc. Internal protection against inverse polarity Output Type(s): • Frontal lit indicators for communication and status • Relay: -- Current: 1.5 A/ 1 point or 5 A/COM Price Each 1 -- Voltage: below 250 VAC or 30 VDC -- Maximum Loading: 75 VA (Inductive), 90 W (Resistive) SIG-300 Profibus DP/Modbus RTU gateway $495.00 • Transistor: -- @55°C 0.1 A/1point, @50°C 0.15 A/1point, @45°C 0.2 A/1point, @40°C 0.3 A/1point Splat SL100 Controller -- Voltage: 30 VDC -- Power Consumption: 9W SL100 is a single board programmable logic controller that includes a number of innovative features.

Price Each 1 5+ Features: • 8 digital inputs. The inputs can accept relay DEC-120 DVP16SM11N, 16 Digital Input Module $242.00 less 10% contacts or NPN open collector. • 8 digital outputs. The 8 digital outputs are DEC-122 DVP16SP11R, 8 Digital Input and 8 Relay $252.00 less 10% 500 mA Darlington transistors capable of driving Outputs Module small DC solenoid valves or relay coils. • 1 versatile analog Input can be configured to operate on 0 to 10 V, DEC-124 DVP16SP11T, 8 Digital Input and 8 Tran- $252.00 less 10% 0 to 20 mA or as a temperature measuring input (using an external sistor Outputs Module thermistor sensor) DEC-126 DVP08SN11R 8 Relay Outputs Module $286.00 less 10% • 1 analog outputs which can generate a 0 to 10 V signal, with a maximum load current of 5 mA. The outputs have internal current limiting. For program development all you need is our free software, a simple plug DVP04PT-S/DVP04TC-S 4 Channel Temperature Function pack power supply and a standard RS-232 cable. Module The DVP04PT-S allows the connection of four platinum temperature sen- Price Each 1 5+ sors (PT100 3-WIRE 100 Ω 3850 PPM/°C(DIN 43760 JIS C1604-1989)). SPL-010 SL100 Development kit $155.80 less 10% The PLC converts the sensors input to a 14-bit digital signal, which can be manipulated using TO and FROM commands in the ladder SPL-011 SL100 controller board $147.25 less 10% logic program. The DVP04TC-S allows the connection of four thermocouple sensors (Type J/K). The DVP04TC-S series can read/write the data by using instructions FROM Splat MMI 202 Controller / TO via DVP-PLC SS/SA/SX/SC MPU program. The MMi202 is a single board programmable logic controller that includes Features : a number of innovative features. • Power Supply Voltage 24 VDC (20.4VDC~28.8VDC) ( –15% ~ +20%) Key features are: • Analog Input Channel 4 channels per module • 8 digital inputs. The inputs can accept relay contacts or NPN open collector. Input 7 can act as a • Resolution 14 bits (0.1°C) 14 bits (0.18°F) high speed counter. • Overall Accuracy ±0.5% of full scale of 25°C (77°F), ±1% of full scale • 8 digital outputs with LED indicators. The digital during 0 ~ 55°C outputs are open collector type • Temperature Input: • 2 versatile analog inputs. Each single ended input -- Range J-type: -100°C ~ 700°C can be configured to operate on 0 to 10 V, 0 to -- K-type: -100°C ~ 1000°C 20 mA or as a temperature measuring input • Digital Conversion • 2 analog outputs which can generate a 0 to 10 V signal, with a maxi- -- Range J-type: K-1000 ~ K7000 mum load current of 5 mA. The outputs have internal current limiting -- K-type: K-1000 ~ K10000 Price Each 1 5+

Price Each 1 5+ SPL-001 MMI202DK Development Kit $228.00 less 10%

DEC-105 DVPO4PT-S 4 Channeel Temperature $249.00 less 10% SPL-002 MMI202DK216 Development kit with LCD $319.20 less 10% Function Module SPL-003 MMI202 0EM Controller Board $182.40 less 10% DEC-107 DVPO4TC-S 4 Channel Temperature Func- $249.00 less 10% tion Module SPL-004 MMI202 OEM controller board with real $216.60 less 10% time clock

Page 40 Ocean Controls Catalogue 2012 OCEANCOUNTERS CONTROLS & TIMERS

PNLMMi216 - Faceplate for MMi w/ 2 × 16 LCD Programmable 6 Digit Counter This is the same metal (Al) faceplate used in the This programmable 6-digit counter is also a batch MMi202cDK216 kit. Pre-drilled to suit the MMi20 × OEM or counter and totaliser, performs quadrature counting and MMi20xcOEM board and supplied with fasteners and spac- accepts remote reset. Its 2 outputs with built-in timers ers. Weight: 0.10 kg can be activated at any of the 3 counter presets: unit, batch or totaliser. It features a special function key, full scale adjustment and several other advanced configuration options. RS-485 communication allows the unit to function as a Modbus RTU slave Price Each 1 5+ Features: SPL-005 PNLMMi216-Faceplate for MMi w/2x16 $33.25 less 10% LCD • Input types: (2 for counting, 1 reset) type NPN/PNP, dry contact (relay, switch, etc) or voltage pulse. SPL-007 PNLMMi216-Faceplate for MMi, no LCD $21.85 less 10% • Max. count frequency: 50 Hz or 10 kHz • Counter scale factor: 0.00001 to 9.99999 • Counting: UP or DOWN OVLMMi216 - Overlay for MMi w/ 2 × 16 LCD • F key: counter hold, counter reset, outputs reset • Outputs: 1 SPST relay and 1 pulse 5 V/25 mA output This is the same polyester overlay used in in the • Output timer: 10 ms to 9999 s MMi20 × cDK216 kit. It allows you to simply add your • Power: 100~240 VDC/VAC ±10% or 24 VDC/VAC own legends to each of the 5 push buttons and 7 • Internal battery for data hold programmable LEDs. Weight: 0.01 kg • Sensor supply output: 12 VDC/50 mA • IP65 UL94 V-2 front panel; IP20 UL94 V-0 enclosure • Size: 48 × 48 × 110 mm

Price Each 1 5+

Price Each 1 5+ NOV-400 6 Digit counter Relay+Pulse out 20 VAC $129.00 less 10%

SPL-006 OVLMMi216-Overlay for MMi w/2 × 16 $34.20 less 10% NOV-401 6 Digit counter relay+pulse out 24 VDC $129.00 less 10% LCD NOV-405 6 Digit counter relay+pulse RS-485 240 $159.00 less 10% SPL-008 OVLMMi216-Overlay for MMi, no LCD $26.60 less 10% VAC

NOV-406 6 Digit counter relay+pulse RS-485 24 $159.00 less 10% LCD216BD - Dimmable, backlit 2 × 16 display VDC This is the same backlit display used in the SPLat Controls MMi202cDK216 (after May '09). It is sup- 7 Digit LCD Counter plied complete with a connection cable, mounting hardware and a heatsink for the controller's regulator This self powered counter (internal battery) can (the extra current drawn by the backlight necessi- count up to 9999999 and retains data at least 10 tates a heatsink). years. It comes in two forms the CHN-007 (accepts NPN signals and switch contacts) and the CHP- Price Each 1 5+ 007(accepts PNP signals). The maximum input signal frequency is 20 Hz. Reset switch on the front panel. SPL-009 LCD216BD-Dimmable, backlit 2 × 16 $59.85 less 10% display Specifications: • Ambient Operating Temperature 0 to 50°C • Measure 45(W) × 22(H) × 48(D) mm

Counters & Timers Price Each 1 5+ CT34 Combination 6 Digits Counter and 6 Digits rate CHN-007 7 Digit LCD counter NPN input $42.50 less 10% meter CHP-007 7 Digit LCD counter PNP input $42.50 less 10% The CT34 panel meter is a combination totaliser and rate meter. It has separate 6-digit displays and takes dry contact, NPN or PNP type pulse sen- 4 Digit Up Down Counter Kit & Clear Top Bulkhead Case sors as input. The counter has a DC voltage pulse A low cost 4 Digit Up Down Counter. As a count up output for driving an SSR. The rate meter has a dry counter its range is from 0000 to 9999; reverse for contact changeover relay output. count down. Inputs include “Reset”, “Count”, “Count Direction” and “Disable”. It also has an “Overflow” The counter has a pulse input, reset input and a output for connecting to another counter which allows gate or direction input. There are 7 counter operation modes including an 8 Digit counter to be made. automatically cycling, batch and dosing modes. Programmable scaling, count direction inversion, filtering and setpoints with hysteresis make this Where as the 4 digit presettable down counter with a very flexible meter. The rate meter is configurable to display the period output and reset. The starting count value can be between pulses, frequency of pulses (Hz), RPM (pulses per minute), set using 2 pushbuttons. Counter can be used pulses per hour, or frequency with user-configurable scaling. The output for both high and low speed counting applica- relay can be set to activate above or below a setpoint with hysteresis.m tions. The 4 operating modes controls how the cable. The thermocouple version accepts J, K or T thermocouples. output behaves when the count reaches zero and is powered within the range of 9 to 15 VDC Both Features: . counters can be mounted in our clear Bulkhead • Pulse input suitable for dry contact, PNP or NPN type sensors up to 5 kHz Plastic case of dimension 120 × 70 × 30 mm. • Clear (reset) input with 4 functions • Direction or Gate input • Programmable input filter for suppression of contact bouncing • Prescaler coefficients 1...9999, multiplying and dividing • Pulse counting and batch counting Price Each 1 5+ • 0 to 2147483647 Counting range KIT-129 4 Digit up down counter kit $33.00 less 10% • Programming through keyboard • 230 VAC Powered KIT-154 4 Digit Presettable Down Counter kit $33.00 less 10%

CAS-001 Clear Top Bulkhead Case $10.86 less 10% Price Each 1 5+

CMC-200 CT34 Combination 6 Digits Counter and 6 $229.00 less 10% Digits rate meter

Ocean Controls Catalogue 2012 Page 41 OCEANCOUNTERS CONTROLS & TIMERS

7 Digit LCD Minute/Hour Timer Cyclic Timer This self powered timer (internal battery) comes in two forms THM-007 This is a budget priced cyclic timer with selectable individual times for the and the THH-007. The TH-7NM accepts a NPN signal or relay contact to ON and OFF periods. Din Rail Mounting. 6 timing ranges - 0.6s to common and counts up to 999999.9 minutes. 100hr. Working Modes:loop around, loop once. The TH-7NH accepts a NPN signal or relay Features: contact to common and counts up to 999999.9 • Supply Voltage 24 to 240 VAC/VDC hours. Both types retain data for at least 10 • Output - 1 Change over relay years. They also feature a reset switch on the • Output Indication- Red LED, flashing at timing, Green LED, lit front panel as relay on Specifications: • Ambient Operating Temp 0 to 50°C • Measure 45(W) × 22(H) × 48(D) mm Price Each 1 5+ HER-103 DHC-19S-S Cyclic timer $59.95 less 10% Price Each 1 5+

THM-007 7 Digit LCD Minute Timer $42.50 less 10% TM-619 Weekly Timer The TM-619 is a weekly timer cabale of switching a large load at pre- THH-007 7 Digit LCD Hour timer $42.50 less 10% programmed times during the week. The timer can hold upto 8 programs. Features: Programmable Timer • Relay Output: 16 A SPDT @ 250 VAC With a 4 digit display, this timer offers a relay output to be • 12/24 VDC, 230 VAC Powered switched at preprogrammed intervals according to eleven • Day and week clock different timing functions. The LED display shows the • High contrast LCD running time and the digital inputs execute start, hold and • 8 programs with combinations: every day the same, Every day different, from Monday to Friday, reset functions. from Sat. to Sun., 3 alternate days Features: • Battery backup for power failure • Input types:NPN/PNP, dry contact and voltage pulse • Reset function and manual override • Output type: 3 A @250 VAC relay or 5 VDC voltage • Dimensions: 60 × 60 × 34 mm pulse • Flush panel or DIN rail mounting • Display: high efficiency 10 mm LED The timer has spade-type connectors for power and relay contacts. It • 12 to 24 VDC/VAC or 85 to 264 VAC versions comes with suitable matching cable crimps (pictured coming out of the • Up and down counting top of the unit) These timers find broad application in heating and refrig- • Eleven different timer modes. One mode is user defined erating systems, boilers, ovens, dryers, defrosting equipment, swimming • Three digital inputs for special functions pools, hatcheries, illumination, etc • Frontal key to execute one pre-programmed special function • Programmable time range from 0.01 second to 9999 hours Price Each 1 5+

Price Each 1 5+ NOR-101 TM-619-12 Weekly Timer 12 VDC $49.95 less 10%

TIM-010 Programmable Timer 240 VAC $145.00 less 10% NOR-103 TM-619-12 Weekly Timer 12 VDC on DIN $54.95 less 10% rail mount TIM-011 Programmable Timer 24 VDC $145.00 less 10% NOR-105 TM-619-24 Weekly Timer 24 V $49.95 less 10% Multi-Function Timer NOR-107 TM-619-24 Weekly Timer 24 V on DIN $54.95 less 10% Rail Mount This is a budget priced multifunction timer with change over relay output NOR-111 TM-619-24 Weekly Timer 230 VAC $49.95 less 10% Features include: NOR-113 TM-619-24 Weekly Timer 230 VAC on DIN $54.95 less 10% • 6 timing ranges: 6 s, 60 s, 6 min, 10 hr, 100 hr rail mount • 8 different functions include: -- Delay On Energisation -- On Pulse (after Energisation) Weekly Programmable Timer -- On Pulse (Trailing edge, signal start relay on) This is a budget priced weekly timer -- On Pulse (Trailing edge, signal start relay on and delay off) Features: -- Delay Off (Trailing Edge, signal start) • Advanced pre-setting one week before -- Off Pulse (Trailing edge, signal start, relay on and delay off) • Minimum interval: 1 minute -- On and Off Pulse (Signal Start delay on and delay off) • Supply Voltage: 180 to 264 VAC (50/60 Hz) -- On and Off Pulse (Signal Start relay on and delay off) • Output: 1 Change over relay 16 A @250 VAC (resistive • Supply Voltage 24 to 240 VAC/VDC load) • DIN rail mountable • LCD Display, DIN rail mountable

Price Each 1 5+ Price Each 1 5+

HER-101 DHC-19M Multi-function timer $59.95 less 10% HER-110 DHC15 Weekly Programmable timer $32.95 less 10%

The website will allow you to provide us with DHC18 Staircase Light Timer the account details and contact information The DHC18 Staircase light timer is a simple DIN-rail mount timer for delayed-off applications. It was designed to control lighting in stairwells for a courier of your choice. We will pack the of apartments but has many other uses such as timed items and book your carrier on your account lighting for garages or driveways. Override switch Features: to pick up and deliver your items. • Instant on, delayed off timer • 240 V operation For example, you can provide us with UPS • ½ to 20 minutes delay or FedEx account details or specify Couriers • 16 A switching capability Please receiver pays to use your tokens. Price Each 1 5+

HER-101 DHC-19M Multi-function timer $59.95 less 10%

Page 42 Ocean Controls Catalogue 2012 OCEANELECTRICAL CONTROLS PARTS

Multi Function Programmable Timer Kit Electrical Parts This timer supports up to 7 different modes of operation. It can be programmed with a delay time of 1 second to 2550 minutes. Can switch up 240 VAC @ 5A. Universal DIN Rail Terminals Our new line of DIN-rail terminals will impress both on quality and price. Timing Modes: • Instant On, Delayed Off, Level triggered Trig- If you would like a free sample pack to inspect then e-mail us. ger signal operates the relay and starts the timing cycle. • Instant On, Delayed Off, Edge triggered Same as Mode 1 except Loss of trigger signal does not affect the timing cycle. • Delayed On Trigger signal starts the timing cycle. At the end of the delay the relay operates and remains on until trigger signal is removed. • Instant On and Hold, Delayed Off Trigger signal operates the relay. The relays remain operated while the trigger signal is present. • Toggling Trigger signal operates the relay for selected delay time. The relay then releases for the same delay time. • Instant On, Delayed Off, with Pause Similar to Mode 0, however loss Type (IEC SKJ-2.5 SKJ-4 SKJ-6 of trigger signal causes the timing cycle to pause ROHS) • Delayed On with Pause Trigger signal starts the timing signal. W/T/H(mm) 42.5 × 8.2 × 46.5 42.5 × 5.2 × 46.5 42.5 × 6.2 × 46.5 mm mm mm Price Each 1 5+ Voltage (V) 800 KIT-141 Multi-function Programmable Timer Kit $33.50 less 10% Current (A) 32 41 57 KTA-141 Multi-function Programmable timer as- $48.50 less 10% sembled Rigid cable 1.0-4/ AWG24-12 0.2-6/ AWG24-10 0.2-10/ AWG24-8 (mm2)

Soft cable 1.0-2.5/ AWG24- Dual Cyclic Timer or Pulse Generator 0.2-4/ AWG24-10 0.2-6/ AWG24-8 (mm2) 12 The CYC-001 is a dual cyclic timer or pulse generator. For each cyclic timer you can configure the width of the high Box Quantity 100 85 65 and low portion of the pulse (0 to 9999999.9 secs) and the number of pulses (1 to 9999999). Price Each 1 20+ A 0 for the number of pulses indicates endless pulses. TRM-007 SKJ-2.5 Universal 2.5 mm Terminal $0.99 less 10% Two digital inputs control the operation of the timer. An enable pin starts the timer and when low operates the TRM-010 SKJ-4 Universal 4 mm terminal $0.99 less 10% timer. TRM-013 SKJ-6 Universal 6 mm terminal $1.39 less 10% If it goes high then the timing is suspended. A reset pin causes the cyclic timer pulses to restart again. The Dual Cyclic Timer is easily configured by a PC program via its serial port. All parameters are stored into the non Universal DIN Rail Terminals volatile EEPROM memory. Configurations can be saved to a file on your PC. Our new line of DIN-rail terminals will impress both on quality and price. If you would like a free sample pack to inspect then e-mail us. Features: • 12 VDC Powered • Relays can switch 5 A @240 VAC • Dimensions 107(L) × 87(W) × 24(H) mm

Price Each 1 5+

CYC-001 Cyclic Timer/Pulse generator Card $79.50 less 10%

CYC-002 Cyclic timer/pulse generator on DIN Rail $109.00 less 10% Type (IEC SKJ-10 SKJ-16 SKJ-35 ROHS) Square Wave Oscillator W/T/H (mm) 50.5 × 15.2 × 61 42.5 × 10.2 × 42.5 × 12.2 × This simple kit, based on the popular 555 timer IC, generates six preset mm 46.5 mm 50.5 mm frequencies from 1 Hz to 100 kHz. It has a wide operat- Voltage (V) 800 1000 ing voltage range and even provides visual indication of the output. Current (A) 76 101 150

The kit is constructed on a single-sided printed circuit Rigid cable 0.5-16/ AWG20-6 2.5-25/ AWG12-4 0.75-50/ AWG18 board (PCB). The PCB measures 78 × 50 mm and will (mm2) mount on a small plastic “Jiffy” box (included). Soft cable 0.5-10/ AWG20-6 4-16/ AWG12-4 0.75-35/ AWG18 (mm2)

Box Quantity 50 36 14 Price Each 1 5+

KIT-111 Square Wave Oscillator Kit $20.00 less 10% Price Each 1 20+ KTA-111 Square Wave Oscillator Assembled $35.00 less 10% TRM-016 SKJ-10 Universal 10 mm terminal $1.89 less 10% Services we offer include: TRM-019 SKJ-16 universal 16 mm Terminal $2.39 less 10% • Custom-designed electronics hardware for vol- TRM-022 SKJ-35 Universal 35 mm terminal $4.10 less 10% umes from one-off prototypes to tens of thousands of units • Modification or augmentation of off-the-shelf hard- For our range of clearance items, please ware visit us at www.oceancontrols.com.au but • Embedded programming Atmel and PIC microcon- hurry stock is limited! trollers

Ocean Controls Catalogue 2012 Page 43 OCEANELECTRICAL CONTROLS PARTS

Fuse and Switch DIN rail terminals Earth DIN Rail Terminal

Type (IEC SKJ-2.5RD SKJ-4RD SKJ-4RD/X Type (IEC SKJ-2.5JD SKJ-4JD SKJ-6JD SKJ-10JD ROHS) ROHS)

W/T/H (mm) 58.5/8.0/43.5 72.5/8.2/56 W/T/H 42.5/8.2/46 42.5/5.2/46 64/6.2/46.4 42.5/8.2/46 (mm) Voltage (V) 660 Torque Nm 1.5-1.8 0.5-0.7 0.5-0.7 1.5-1.8 Current (A) 6.3

Rigid cable Rigid cable 0.2-6/ 0.2-6/ AWG24- 0.2-10/ 0.5-16/ 0.2-4/ AWG24-12 0.2-4/ AWG24-12 0.2-4/ AWG24-12 (mm2) AWG24-12 12 AWG24-8 AWG20-6

Soft 0.2-2.5/ AWG24- Soft cable 0.2-2.5/ 0.2-4/ AWG24- 0.2-6/ 1.5-10/ 0.2-4/ AWG24-12 0.2-4/ AWG24-12 cable(mm2) 12 AWG24-12 12 AWG24-8 AWG20-6

Fuse / Switch Fuse Price Each 1 20+ LED indication No No Yes TRM-071 SKJ-2.5JD earth terminal 2.5 mm $2.25 less 10%

Price Each 1 20+ TRM-074 SKJ-4JD earth terminal 4 mm $2.29 less 10%

TRM-041 SKJ-2.5RD fuse terminal $2.19 less 10% TRM-077 SKJ-6JD earth terminal 6 mm $2.69 less 10%

TRM-042 SKJ-2.5RD/X fuse terminal with 240 VAC $2.49 less 10% TRM-080 SKJ-10JD earth terminal 10 mm $3.50 less 10% indicator TRM-043 SKJ-2.5RD/X Fuse terminal with 24 VDC $2.49 less 10% SDK4LD/G Dual Diode Terminal indicator These DIN rail mount terminals have two diodes connected with a com- TRM-044 SKJ-4RD Fuse terminal $2.39 less 10% mon anode. This terminal is useful for connecting the outputs of redun- TRM-047 SKJ-4RD/X Fuse terminal with integrated $3.12 less 10% dant DC supplies together, or for connecting two signals in a "wired or" neon indicator formation. Specifications: Fuse and Switch DIN rail terminals • Manufacturer Part: SDK4LD/G • Rated Voltage: 380 V • Rated Current (Max): 2 A • Diode Current (Max): 1 A • Rated Impulse Voltage: 4 kV • Overvoltage Category: II • Isolation Category: III • Clearance and Creepage Distance: ≥3 mm • Cable Entry: 0.5 to 4.0 mm2

Type(IEC SKJ-10RD SKJ-10RD/X SKJ-2.5SK Price Each 1 24+ ROHS) TRM-165 SDK4LD/G Dual Diode Terminal $4.95 less 10% W/T/H(mm) 62.4/12.2/56 62.4/12.2/56 52/6.2/46 Voltage(V) 660 400 24 V, 1/2 kA Surge Suppression Terminal Current(A) 10 10 16 These DIN rail mount terminals use a MOV to suppress transient voltage spikes, clamping the voltage to approxi- Rigid 0.5-16/AWG12-4 0.5-16/AWG12-4 0.2-4/AWG24-12 mately 24 V. cable(mm2)

Soft 0.5-16/AWG12-4 0.5-16/AWG12-4 0.2-4/AWG24-12 cable(mm2) Specifications:

Fuse/Switch Fuse Switch Nominal Voltage 24V AC/DC Maximum Voltage 30 VAC/38 VDC Price Each 1 20+ Varistor Voltage at 1mA 47 V ±5 V TRM-050 SKJ-10RD Fuse terminal $3.45 less 10% Terminal Current 20 A TRM-053 SKJ-10RD/X Fuse terminal $4.50 less 10% Varistor Surge Current 1/2 kA TRM-056 SKJ-2.5SK test switch $2.45 less 10% Typical Capacitance 13500 pF Cable Entry 0.5 to 2.5 mm2 Often variations on items are available from the manufacturer. Orders of non- Price Each 1 24+ stocked items may require minimum or- TRM-160 24 V, 1 kA Surge suppression terminal $3.00 less 10% der quantities or extra shipping costs. TRM-161 24 V, 2 kA Surge suppression terminal $3.50 less 10%

Page 44 Ocean Controls Catalogue 2012 OCEANELECTRICAL CONTROLS PARTS

Jumpers for Terminals SpringCage Terminal Block These DIN rail mount terminals feature spring-loaded connections. A standard flat-bladed screwdriver is used to open the terminal, allowing insertion of the wire. When the screwdriver is released the terminal forms a vibration-proof and variation-free connection.

Type (IEC ROHS) 10 Way Internal Jumper 10 Way External Jumper

SJK-2.5 SFB1-10-5 SEB2-10-5

SJK-4 SFB1-10-6 SEB2-10-8

SJK-6 SFB1-10-8 SEB2-10-8

SJK-10 SFB1-10-10 SEB2-10-10 Type(IEC ROHS) ST1-1.5 ST1-2.5 SJK-16 SFB1-10-12 SEB2-10-12 W/T/H(mm) 53 × 5 × 28 mm 53 × 5 × 28 mm Voltage(V) 800 Price Each 1 20+ Current(A) 8 24 TRM-091 SFB1 10-5 INTERNAL JUMPER for SJK2.5 $1.99 less 10% Rigid cable(mm2) 0.08-1.5/ AWG28-16 0.08-2.5/ AWG28-12 TRM-092 SFB1 10-6 INTERNAL JUMPER for SJK4 $1.99 less 10% Soft cable(mm2) TRM-093 SFB1 10-8 INTERNAL JUMPER for SKJ6 $2.29 less 10%

TRM-094 SFB1 10-10 INTERNAL JUMPER for SJK-10 $2.79 less 10% Price Each 1 20+

TRM-095 SFB1 10-12 INTERNAL JUMPER for SJK-12 $3.25 less 10% TRM-215 ST1-1.5 Springcage terminal block $0.99 less 10%

TRM-101 SEB 10-5 EXTERNAL JUMPER for SKJ 2.5 $1.50 less 10% TRM-225 ST1-2.5 Springcage terminal block $0.99 less 10% TRM-102 SEB 10-6 EXTERNAL JUMPER for SKJ4 $1.99 less 10%

TRM-103 SEB 10-8 EXTERNAL JUMPER for SJK6 $2.29 less 10% SpringCage Terminal Block TRM-104 SEB 10-10 EXTERNAL JUMPER for SJK10 $2.99 less 10% These DIN rail mount terminals feature spring-loaded connections. A standard flat-bladed screwdriver is used to open the terminal, allowing insertion of the wire. When the screwdriver is released the terminal forms Accessories for Terminals a vibration-proof and variation-free connection.

End plates clip on to the last terminal in a set to cover the exposed contacts. End clamps screw down onto the rail to prevent other terminals Type(IEC ROHS) ST1-4.0 ST1-6.0 from sliding. Label terminals provide a strip than can be marked to docu- ment equipment. W/T/H(mm) 59 × 6 × 29 mm 74.5 × 8 × 32.5 mm Voltage(V) 800

Price Each 1 20+ Current(A) 32 41

TRM-115 SKJ-G (DUK) end plate to suit 2.5 to 16 $0.59 less 10% Rigid cable (mm2) 0.08-4.0/ AWG28-12 0.2-6.0/ AWG24-10 mm terminals Soft cable (mm2) TRM-112 SKJ 2G2 End clamp $0.69 less 10%

TRM-113 SKJ-B1 Label Terminal $0.69 less 10% Price Each 1 20+

TRM-114 SKJ-G (ATP-UK) Grouping Stop $0.79 less 10% TRM-240 ST1-4.0 Springcage terminal block $1.09 less 10%

TRM-116 SKJ-2.5RDG (End cap for 2.5RD fuse $0.59 less 10% TRM-260 ST1-6.0 Springcage terminal block $1.69 less 10% terminals)

TRM-150 SDK4G End plate for Relay/MOV terminals $0.59 less 10% Springcage Terminal End Plates End plate to suit the ST1 springcage terminals. Clips on to We normally deliver goods to international the last terminal in a set to prevent the terminal conductors from coming in contact with other conductors. destinations by air mail.Typical delivery times for air mail are: • New Zealand: 4 to 7 days Price Each 1 20+ • UK and USA: 6 to 10 days TRM-216 ST1-1.5G Springcage terminal end plate $0.55 less 10% • Canada and Europe: 2 weeks TRM-226 ST1-2.5G Springcage terminal end plate $0.55 less 10% • South Africa: 2 to 3 weeks We also offer expedited international delivery TRM-241 ST1-4.0G Springcage terminal end plate $0.55 less 10% by Australia Post Express Courier Interna- TRM-261 ST1-6.0G Springcage terminal end plate $0.59 less 10% tional, ECI, DHL, Fedex or other carriers. You can place your order with us online, fax Options and their costs are displayed as part it to +61 3 9782 5517 or call us on +61 3 of the checkout procedure on the website 9782 5882 to place an order. before the order is finalised.

Ocean Controls Catalogue 2012 Page 45 OCEANELECTRICAL CONTROLS PARTS

Springcage Small Internal Jumpers EC0 & EC1 Cable Labels Series Small jumper to electrically connect two adjacent ST1 springcage DIN-rail terminals. The jumper is an internal type, connecting adjacent terminals without using the springcage terminal connections.

Price Each 1 20+

TRM-217 ST1-1.5G Internal Jumper $0.69 less 10%

TRM-227 ST1-2.5G Internal Jumper $0.69 less 10% Wire Length Label Series Quantity TRM-242 ST1-4.0G Internal Jumper $0.69 less 10% 1.5 to 2.5 mm² EC0 0-9 Box of 50 / 1000 TRM-262 ST1-6.0G Internal Jumper $0.79 less 10% 2.6 to 4.2 mm² EC1 0-9 Cable Entry SpringCage Terminal Block Price Each 1 20+ This series of Springcage Terminal Block has the same function as our previous Springcage Terminal Block with the addition feature of cable TRM-500 ECO-0 Cable labels Box of 1000 $9.95 less 10% entry. For example ST1-2.5/1x2 refers to one side of the terminal has one TRM-501 ECO-1 Cable labels Box of 1000 $9.95 less 10% cable entry and two cable entries on the other side of the terminal. TRM-502 ECO-2 Cable labels Box of 1000 $9.95 less 10%

TRM-503 ECO-3 Cable labels Box of 1000 $9.95 less 10%

TRM-504 ECO-4 Cable labels Box of 1000 $9.95 less 10%

TRM-505 ECO-5 Cable labels Box of 1000 $9.95 less 10%

TRM-506 ECO-6 Cable labels Box of 1000 $9.95 less 10% Type(IEC ROHS) ST1-2.5/ 1 × 2 ST1-2.5/ 2 × 2 TRM-507 ECO-7 Cable labels Box of 1000 $9.95 less 10% W/T/H(mm) 64 × 5 × 28 mm 75 × 5 × 28 mm TRM-508 ECO-8 Cable labels Box of 1000 $9.95 less 10% Voltage(V) 800 800 TRM-509 ECO-9 Cable labels Box of 1000 $9.95 less 10% Current(A) 24 20 TRM-510 EC0-0 Cable labels Box of 50 $0.59 less 10% Rigid cable(mm2) 0.08-2.5/ AWG28-12 TRM-511 ECO-1 Cable labels Box of 50 $0.59 less 10% Soft cable(mm2) TRM-512 ECO-2 Cable labels Box of 50 $0.59 less 10%

Price Each 1 20+ TRM-513 ECO-3 Cable labels Box of 50 $0.59 less 10%

TRM-230 ST1-2.5/1X2 Cable Entry Springcage $1.09 less 10% TRM-514 ECO-4 Cable labels Box of 50 $0.59 less 10% terminal block TRM-515 ECO-5 Cable labels Box of 50 $0.59 less 10% TRM-231 ST1-2.5/1x2 Cable Entry Springcage $0.55 less 10% terminal end plate TRM-516 ECO-6 Cable labels Box of 50 $0.59 less 10%

TRM-235 ST1-2.5/2x2 Cable Entry Springcage $1.29 less 10% TRM-517 ECO-7 Cable labels Box of 50 $0.59 less 10% terninal block TRM-518 ECO-8 Cable labels Box of 50 $0.59 less 10% TRM-236 ST1-2.5/2x2 Cable Entry Springcage $0.60 less 10% TRM-519 ECO-9 Cable labels Box of 50 $0.59 less 10% terminal end plate TRM-520 EC1-0 Cable labels Box of 1000 $9.95 less 10% Cable Entry SpringCage Terminal Block TRM-521 EC1-1 Cable labels Box of 1000 $9.95 less 10% This series of Springcage Terminal Block has the same function as our pre- TRM-522 EC1-2 Cable labels Box of 1000 $9.95 less 10% vious Springcage Terminal Block with the addition feature of cable entry. TRM-523 EC1-3 Cable labels Box of 1000 $9.95 less 10%

TRM-524 EC1-4 Cable labels Box of 1000 $9.95 less 10%

TRM-525 EC1-5 Cable labels Box of 1000 $9.95 less 10%

TRM-526 EC1-6 Cable labels Box of 1000 $9.95 less 10%

TRM-527 EC1-7 Cable labels Box of 1000 $9.95 less 10% Type(IEC ROHS) ST1-4.0/ 1 2 ST1-4.0/ 2 2 × × TRM-528 EC1-8 Cable labels Box of 1000 $9.95 less 10%

W/T/H (mm) 74 × 6 × 29 mm 86 × 6 × 29 mm TRM-529 EC1-9 Cable labels Box of 1000 $9.95 less 10%

Voltage (V) 800 TRM-530 EC1-0 Cable labels Box of 50 $0.59 less 10%

Current (A) 32 TRM-531 EC1-1 Cable labels Box of 50 $0.59 less 10%

Rigid cable (mm2) 0.08-4.0/ AWG28-12 TRM-532 EC1-2 Cable labels Box of 50 $0.59 less 10%

Soft cable (mm2) TRM-533 EC1-3 Cable labels Box of 50 $0.59 less 10%

TRM-534 EC1-4 Cable labels Box of 50 $0.59 less 10% Price Each 1 20+ TRM-535 EC1-5 Cable labels Box of 50 $0.59 less 10% TRM-245 ST1-4.0/ 1x2 Cable Entry Springcage $1.09 less 10% terminal block TRM-536 EC1-6 Cable labels Box of 50 $0.59 less 10%

TRM-246 ST1-4.0/ 1x2 Cable Entry Springcage $0.55 less 10% TRM-537 EC1-7 Cable labels Box of 50 $0.59 less 10% terminal end plate TRM-538 EC1-8 Cable labels Box of 50 $0.59 less 10% TRM-250 ST1-4.0/ 2x2 Cable Entry Springcage $1.29 less 10% terminal block TRM-539 EC1-9 Cable labels Box of 50 $0.59 less 10%

TRM-251 ST1-4.0/ 2x2 Cable Entry Springcage $0.60 less 10% terminal end plate

Page 46 Ocean Controls Catalogue 2012 OCEANELECTRICAL CONTROLS PARTS

DIN Rail Terminal Labels Plastic Cable Glands Strip of SZB5(6,8,10) Labels marked from 1 to 10, suitable for SKJ-2.5/ IP68 cable glands in a range of SKJ-2.5X and SKJ-4/ SKJ-6 /SKJ-10 series. Not suitable for SKJ-2.5X sizes. These glands allow for cy- terminals. lindrical cable entry to enclosures and seal against the elements. Call us for bulk quantity pricing.

Price Each 1 20+

TRM-120 SZB5 DIN Rail Terminal labels $0.29 less 10%

TRM-121 SZB6 DIN Rail Terminal labels $0.29 less 10%

TRM-122 SZB8 DIN Rail Terminal labels $0.29 less 10% TRM-123 SZB10 DIN Rail Terminal labels $0.29 less 10%

DIN Rail Cutter

This easy to use Din Rail Cutter is ideal for cutting 35 × 7.5 mm steel din rail (Top Hat style). The cuts are burr-free without any loss of rail. An adjustable (and removable) stopper arm allows you to repeatedly cut a fixed length of rail. Features: • The blade has an expected life of more than 100,000 cuts (Blades are not replaceable) • Bar is fitted with a rubber handle • 550 mm adjustable length steel stopper with markings in metric Price Each 1 20+ • 90° angle cut • Black spray paint surface CGL-001 PG7 Grey Cable Gland $1.50 less 10% • Dimensions 600 80 135 mm × × CGL-004 PG9 Grey Cable Gland $1.60 less 10%

CGL-007 PG11 Grey Cable Gland $1.70 less 10%

CGL-010 PG13.5 Grey Cable Gland $1.80 less 10%

CGL-013 PG16 Grey Cable Gland $1.90 less 10%

CGL-016 PG19 Grey Cable Gland $2.00 less 10%

CGL-019 PG21 Grey Cable Gland $2.10 less 10%

CGL-022 PG25 Grey Cable Gland $2.30 less 10%

CGL-025 PG29 Grey Cable Gland $2.75 less 10%

Heat Shrink Kit We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colours, lots of sizes, nothing too long. We specially requested some of the sizes with heat sensitive glue which significantly increases Price Each 1 5+ stress relief and water proofing. This kit includes 95 pieces of heat shrink, HET-070 DIN Rail Cutter $99.95 less 10% all of varying colors and sizes, and comes in a clear bag. All pieces are 10cm in length. Bag includes the following diameters, 5 pieces of each: DIN Rail 35 mm 1 metre length • Black -- ø1.5/3.7/6.5/9.5 mm -- ø6.5/9.5 mm with glue • Red -- ø1.5/3.7/6.5/9.5 mm • Green -- ø1.5/3.7/6.5/9.5 mm • Yellow -- ø1.5/3.7 mm • Blue -- ø1.5/3.7 mm • Transparent Price Each 1 5+ -- ø6.5 mm

HEE-050 DIN rail 35 mm 1 metre length $8.95 less 10% Price Each 1

HSH-100 Heat Shrink Kit $8.70

Ocean Controls Catalogue 2012 Page 47 OCEANELECTRICAL CONTROLS PARTS

Heat Shrink Tubing Price Each 1 5+ • Standard 125 °C shrink temperature HSH-071 Yellow by the meter 40/20 $6.10 less 10% • 2:1 shrink ratio • 600 V insulation rating HSH-072 Yellow by the meter 50/25 $7.50 less 10% • VW-1 Flammability Rating • Certificated by UL. CSA. HSH-081 Green by the meter 1.5/0.75 $0.75 less 10% • Sizes range from 1.5 to 50 mm diameter HSH-082 Green by the meter 2.5/1.25 $0.90 less 10% • Range of colours available: black, red, HSH-083 Green by the meter 3.5/1.75 $1.10 less 10% blue, yellow, green and white • Sold by the metre HSH-084 Green by the meter 5.0/2.5 $1.30 less 10%

HSH-085 Green by the meter 7.0/3.5 $1.60 less 10% Price Each 1 5+ HSH-086 Green by the meter 10/5.0 $2.00 less 10% HSH-001 Black by the meter 1.5/0.75 $0.75 less 10% HSH-087 Green by the meter 15/7.5 $2.80 less 10% HSH-002 Black by the meter 2.5/1.25 $0.90 less 10% HSH-088 Green by the meter 20/10 $3.10 less 10% HSH-003 Black by the meter 3.5/1.75 $1.10 less 10% HSH-089 Green by the meter 25/12.5 $3.90 less 10% HSH-004 Black by the meter 5.0/2.5 $1.30 less 10% HSH-090 Green by the meter 30/15 $4.80 less 10% HSH-005 Black by the meter 7.0/3.5 $1.60 less 10% HSH-091 Green by the meter 40/20 $6.10 less 10% HSH-006 Black by the meter 10/5.0 $2.00 less 10% HSH-092 Green by the meter 50/25 $7.50 less 10% HSH-007 Black by the meter 15/7.5 $2.80 less 10% HSH-121 White by the meter 1.5/0.75 $0.75 less 10% HSH-008 Black by the meter 20/10 $3.10 less 10% HSH-122 White by the meter 2.5/1.25 $0.90 less 10% HSH-009 Black by the meter 25/12.5 $3.90 less 10% HSH-123 White by the meter 3.5/1.75 $1.10 less 10% HSH-010 Black by the meter 30/15 $4.80 less 10% HSH-124 White by the meter 5.0/2.5 $1.30 less 10% HSH-011 Black by the meter 40/20 $6.10 less 10% HSH-125 White by the meter 7.0/3.5 $1.60 less 10% HSH-012 Black by the meter 50/25 $7.50 less 10% HSH-126 White by the meter 10/5.0 $2.00 less 10% HSH-021 Red by the meter 1.5/0.75 $0.75 less 10% HSH-127 White by the meter 15/7.5 $2.80 less 10% HSH-022 Red by the meter 2.5/1.25 $0.90 less 10% HSH-128 White by the meter 20/10 $3.10 less 10% HSH-023 Red by the meter 3.5/1.75 $1.10 less 10% HSH-129 White by the meter 25/12.5 $3.90 less 10% HSH-024 Red by the meter 5.0/2.5 $1.30 less 10% HSH-130 White by the meter 30/15 $4.80 less 10% HSH-025 Red by the meter 7.0/3.5 $1.60 less 10% HSH-131 White by the meter 40/20 $6.10 less 10% HSH-026 Red by the meter 10/5.0 $2.00 less 10% HSH-132 White by the meter 50/25 $7.50 less 10% HSH-027 Red by the meter 15/7.5 $2.80 less 10% HSH-141 Clear by the meter 1.5/0.75 $0.75 less 10% HSH-028 Red by the meter 20/10 $3.10 less 10% HSH-142 Clear by the meter 2.5/1.25 $0.90 less 10% HSH-029 Red by the meter 25/12.5 $3.90 less 10% HSH-143 Clear by the meter 3.5/1.75 $1.10 less 10% HSH-030 Red by the meter 30/15 $4.80 less 10% HSH-145 Clear by the meter 5.0/2.5 $1.30 less 10% HSH-031 Red by the meter 40/20 $6.10 less 10% HSH-145 Clear by the meter 7.0/3.5 $1.60 less 10% HSH-032 Red by the meter 50/25 $7.50 less 10% HSH-146 Clear by the meter 10/5.0 $2.00 less 10% HSH-041 Blue by the meter 1.5/0.75 $0.75 less 10% HSH-147 Clear by the meter 15/7.5 $2.80 less 10% HSH-042 Blue by the meter 2.5/1.25 $0.90 less 10% HSH-148 Clear by the meter 20/10 $3.10 less 10% HSH-043 Blue by the meter 3.5/1.75 $1.10 less 10% HSH-149 Clear by the meter 25/12.5 $3.90 less 10% HSH-044 Blue by the meter 5.0/2.5 $1.30 less 10% HSH-150 Clear by the meter 30/15 $4.80 less 10% HSH-045 Blue by the meter 7.0/3.5 $1.60 less 10% HSH-151 Clear by the meter 40/20 $6.10 less 10% HSH-046 Blue by the meter 10/5.0 $2.00 less 10% HSH-152 Clear by the meter 50/25 $7.50 less 10% HSH-047 Blue by the meter 15/7.5 $2.80 less 10% HSH-201 Black roll 200 metres 1.5/0.75 $59.95 less 10% HSH-048 Blue by the meter 20/10 $3.10 less 10% HSH-202 Black roll 200 metres 2.5/1.25 $72.00 less 10% HSH-049 Blue by the meter 25/12.5 $3.90 less 10% HSH-203 Black roll 200 metres 3.5/1.75 $88.00 less 10% HSH-050 Blue by the meter 30/15 $4.80 less 10% HSH-204 Black roll 100 metres 5.0/2.5 $59.95 less 10% HSH-051 Blue by the meter 40/20 $6.10 less 10% HSH-205 Black roll 100 metres 7.0/3.5 $72.00 less 10% HSH-052 Blue by the meter 50/25 $7.50 less 10% HSH-206 Black roll 100 metres 10.0/5.0 $79.95 less 10% HSH-061 Yellow by the meter 1.5/0.75 $0.75 less 10% HSH-207 Black roll 100 metres 15.0/7.5 $109.95 less 10% HSH-062 Yellow by the meter 2.5/1.25 $0.90 less 10% HSH-208 Black roll 50 metres 20/10 $87.50 less 10% HSH-063 Yellow by the meter 3.5/1.75 $1.10 less 10% HSH-209 Black roll 25 metres 25/12.5 $67.50 less 10% HSH-064 Yellow by the meter 5.0/2.5 $1.30 less 10% HSH-210 Black roll 25 metres 30/15 $72.00 less 10% HSH-065 Yellow by the meter 7.0/3.5 $1.60 less 10% HSH-211 Black roll 25 metres 40/20 $91.50 less 10% HSH-066 Yellow by the meter 10/5.0 $2.00 less 10% HSH-212 Black roll 25 metres 50/25 $112.50 less 10% HSH-067 Yellow by the meter 15/7.5 $2.80 less 10% HSH-221 Red roll 200 metres 1.5/0.75 $59.95 less 10% HSH-068 Yellow by the meter 20/10 $3.10 less 10% HSH-222 Red roll 200 metres 2.5/1.25 $72.0 less 10% HSH-069 Yellow by the meter 25/12.5 $3.90 less 10% HSH-223 Red roll 200 metres 3.5/1.75 $88.00 less 10% HSH-070 Yellow by the meter 30/15 $4.80 less 10%

Page 48 Ocean Controls Catalogue 2012 OCEANENCLOSURES CONTROLS

Price Each 1 5+ Price Each 1 5+

HSH-224 Red roll 200 metres 5.0/2.5 $59.95 less 10% HSH-309 White roll 200 metres 25.0/12.5 $67.50 less 10%

HSH-225 Red roll 200 metres 7.0/3.5 $79.95 less 10% HSH-310 White roll 200 metres 30/15.0 $72.00 less 10%

HSH-226 Red roll 200 metres 10.0/5.0 $79.95 less 10% HSH-311 White roll 200 metres 40/20 $91.50 less 10% HSH-227 Red roll 200 metresOCEAN 15.0/7.5 $109.95 less 10% CONTROLSHSH-312 White roll 200 metres 50/25 $112.50 less 10% HSH-228 Red roll 200 metres 20/10 $87.50 less 10% HSH-321 Clear roll 200 metres 1.5/0.75 $59.95 less 10%

HSH-229 Red roll 200 metres 25.0/12.5 $67.50 less 10% HSH-322 Clear roll 200 metres 2.5/1.25 $72.00 less 10%

HSH-230 Red roll 200 metres 30/15.0 $72.00 less 10% HSH-323 Clear roll 200 metres 3.5/1.75 $88.00 less 10%

HSH-231 Red roll 200 metres 40/20 $91.50 less 10% HSH-324 Clear roll 200 metres 5.0/2.5 $59.95 less 10%

HSH-232 Red roll 200 metres 50/25 $112.50 less 10% HSH-325 Clear roll 200 metres 7.0/3.5 $79.95 less 10%

HSH-241 Blue roll 200 metres 1.5/0.75 $59.95 less 10% HSH-326 Clear roll 200 metres 10.0/5.0 $79.95 less 10%

HSH-242 Blue roll 200 metres 2.5/1.25 $72.00 less 10% HSH-327 Clear roll 200 metres 15.0/7.5 $109.95 less 10%

HSH-243 Blue roll 200 metres 3.5/1.75 $88.00 less 10% HSH-328 Clear roll 200 metres 20/10 $87.50 less 10%

HSH-244 Blue roll 200 metres 5.0/2.5 $59.95 less 10% HSH-329 Clear roll 200 metres 25.0/12.5 $67.50 less 10%

HSH-245 Blue roll 200 metres 7.0/3.5 $79.95 less 10% HSH-330 Clear roll 200 metres 30/15.0 $72.00 less 10%

HSH-246 Blue roll 200 metres 10.0/5.0 $79.95 less 10% HSH-331 Clear roll 200 metres 40/20 $91.50 less 10%

HSH-247 Blue roll 200 metres 15.0/7.5 $109.95 less 10% HSH-332 Clear roll 200 metres 50/25 $112.50 less 10%

HSH-248 Blue roll 200 metres 20/10 $87.50 less 10% HSH-249 Blue roll 200 metres 25.0/12.5 $67.50 less 10% Enclosures HSH-250 Blue roll 200 metres 30/15.0 $72.00 less 10%

HSH-251 Blue roll 200 metres 40/20 $91.50 less 10% 17-127/17-129 Aluminium Enclosure

HSH-252 Blue roll 200 metres 50/25 $112.50 less 10% A simple aluminium enclosure with PCB slots that can be bolted to a panel. The enclosure is an aluminium extrusion section with end plates and ABS HSH-261 Yellow roll 200 metres 1.5/0.75 $59.95 less 10% plastic end caps. The end plates can be machined for HSH-262 Yellow roll 200 metres 2.5/1.25 $72.00 less 10% connectors and indicators.

HSH-263 Yellow roll 200 metres 3.5/1.75 $88.00 less 10% The 17-127 has a dimension of 114 × 90 × 42 mm whereas the 17-129 enclosure has a dimension of 107 HSH-264 Yellow roll 200 metres 5.0/2.5 $59.95 less 10% × 114 × 45 mm HSH-265 Yellow roll 200 metres 7.0/3.5 $79.95 less 10%

HSH-266 Yellow roll 200 metres 10.0/5.0 $79.95 less 10%

HSH-267 Yellow roll 200 metres 15.0/7.5 $109.95 less 10% Price Each 1 HSH-268 Yellow roll 200 metres 20/10 $87.50 less 10% ENC-030 17-127 Aluminium enclosure $15.95 HSH-269 Yellow roll 200 metres 25.0/12.5 $67.50 less 10% ENC-031 17-129 Aluminium enclosure $19.95 HSH-270 Yellow roll 200 metres 30/15.0 $72.00 less 10% HSH-271 Yellow roll 200 metres 40/20 $91.50 less 10% 23-16A Standard Din-rail Enclosure 101x115x45 mm HSH-272 Yellow roll 200 metres 50/25 $112.50 less 10% Size: 101x115x45 mm HSH-281 Green roll 200 metres 1.5/0.75 $59.95 less 10% Material: Aluminium Cover and Bottom HSH-282 Green roll 200 metres 2.5/1.25 $72.00 less 10%

HSH-283 Green roll 200 metres 3.5/1.75 $88.00 less 10%

HSH-284 Green roll 200 metres 5.0/2.5 $59.95 less 10%

HSH-285 Green roll 200 metres 7.0/3.5 $79.95 less 10% Price Each 1 HSH-286 Green roll 200 metres 10.0/5.0 $79.95 less 10% ENC-002 23-16A Standard DIN-rail enclosure 101x115x45 mm $14.75 HSH-287 Green roll 200 metres 15.0/7.5 $109.95 less 10% 23-14 Standard Enclosure 101x115x55 mm HSH-288 Green roll 200 metres 20/10 $87.50 less 10% 23-14A Standard Enclosure with DIN Rail Mount 101x115x55 mm HSH-289 Green roll 200 metres 25.0/12.5 $67.50 less 10% Size: 101x115x55 mm. Material: Aluminium Cover and Bottom HSH-290 Green roll 200 metres 30/15.0 $72.00 less 10%

HSH-291 Green roll 200 metres 40/20 $91.50 less 10%

HSH-292 Green roll 200 metres 50/25 $112.50 less 10%

HSH-301 White roll 200 metres 1.5/0.75 $59.95 less 10%

HSH-302 White roll 200 metres 2.5/1.25 $72.00 less 10%

HSH-303 White roll 200 metres 3.5/1.75 $88.00 less 10%

HSH-304 White roll 200 metres 5.0/2.5 $59.95 less 10% Price Each 1 HSH-305 White roll 200 metres 7.0/3.5 $79.95 less 10% ENC-003 23-14 Standard Enclosure 101x115x55 mm $17.50 HSH-306 White roll 200 metres 10.0/5.0 $79.95 less 10% ENC-004 23-14A Standard Enclosure with DIN rail Mount $23.50 HSH-307 White roll 200 metres 15.0/7.5 $109.95 less 10% 101x115x55 mm HSH-308 White roll 200 metres 20/10 $87.50 less 10%

Ocean Controls Catalogue 2012 Page 49 OCEANMICO-CONTROLLER CONTROLS PROGRAMMERS

DIN Rail Enclosures with 8 or 12 Way Terminals and Small Plastic Enclosure Protoboards A simple plastic enclosure with screw supports Designed for housing electronic control circuitry for PCB mounting in the base of the enclousre. for use in industrial applications. Supplied com- Ideal for automotive, audio/video, security and plete with PCB mount terminals. Clip in top sec- a host of other applications tion is removable for access to PCB. Suits 35 mm top hat DIN rail mount via the integral mount- Features: ing bracket. Dinkle DME series. Each enclosure • Size: 91 × 57 × 24 mm houses a single PCB. • Material ABS Plastic

Price Each 1 Price Each 1

ENC-020 DIN rail enclosure slim 8 way terminal $13.95 ENC-040 Small plastic enclosure $11.95

ENC-021 DIN rail enclosure slim 8 way terminal with protoboard $29.00 IP65 Plastic Panel Mount Enclosures ENC-022 DIN rail enclosure slim 12 way terminal $19.80 A simple IP65 (Waterproof and Dustproof) plastic enclosure with flange ENC-023 DIN rail enclosure slim 12 way terminal with proto- $34.00 board that allows you to easily bolt it to a panel. Screw supports for PCB mounting are in the base of the enclousre.

22-62 Industrial Control Enclosure with ProtoBoard and The enclosure walls are 3 mm thick resulting Terminals in a more robust construction than your typical jiffy box. Ideal for automotive, audio/video, 22-62 enclosures can be DIN rail mounted or screwed to a panel. security and a host of other applications

Size: 115 × 90 × 41 mm Material: ABS Plastic Features: • Size: 83 × 58 × 33 mm • Material ABS Plastic • IP Protection Class: IP65

Price Each 1

ENC-055 IP65 Plastic panel enclosure 83 × 58 × 33 mm $9.95

ENC-060 IP65 Plastic panel enclosure 160 × 75 × 50 mm $15.95

ENC-62 IP65 Plastic panel enclosure 198 × 90 × 60 mm $19.95 Price Each 1 ENC-005 22-62 Industrial Control Enclosure 115 × 90 × 41 mm $10.95 4981 Panel Mount Enclosure ENC-007 22-62 Industrial enclosure wtih protoboard and $25.00 The 4981 panel mount enclosure's clips can be adjusted to suit a wide terminals range of panel thicknesses Internal ribs allow a standard thickness PCB to be slotted in to one of 10 positions, including a position low enough for 22-23 Industrial Control Enclosure with ProtoBoard and edge-mounted buttons to line up with the front face buttons. Terminals The rear of the enclosure has cutouts for terminals or cable entry. 22-23 Enclosures can be DIN rail mounted or screwed to a panel. Features: • External dimensions: 48 × 96 × 70 mm Size: 115 × 90 × 40 mm. Material: ABS Plastic • Suits Panel cutout: 44 × 90 mm • PCB Dimensions: ~80 × ~60 mm • Display window: 64 × 22 mm • Panel mount clips adjust for panel width • ABS and PC plastic

Price Each 1

ENC-100 4981 Panel mount enclosure $12.65

Price Each 1 4980A Panel Mount Enclosure

ENC-006 22-23 Industrial control enclosure 115 × 90 × 40 mm $10.95 The 4980A panel mount enclosure's clips can be adjusted to suit a wide range of panel thicknesses. ENC-008 22-23 Industrial enclosure with protoboard and $25.00 terminals Internal ribs allow a standard thickness PCB to be slotted in to one of 2 positions, including a position low enough for edge-mounted buttons to line up with the front face buttons. 22-80 Industrial Control Enclosure A 9-way barrier terminal strip fills a rear cutout 22-80 enclosures can be DIN rail mounted or panel and can be soldered directly to a PCB. A second mounted using screws. cutout has a break-away panel and can fit a second terminal strip. Size: 145 × 90 × 40 mm. Material: ABS Plastic Features: • External dimensions: 48 × 96 × 108 mm • Suits Panel cutout: 45 × 91 mm • PCB Dimensions: ~80 × ~90 mm • Display window: 92 × 31 mm Price Each 1 • Panel mount clips adjust for panel width • ABS and PC plastic, metal clips ENC-009 22-80 Industrial control enclosure 145 × 90 × 40 mm $12.95

Price Each 1

ENC-105 4980A Panel Mount enclosure $12.65

Mico-controller Programmers

Page 50 Ocean Controls Catalogue 2012 OCEANMICO-CONTROLLER CONTROLS PROGRAMMERS

AVRISP-MKII In-System Programmer AVR Programming Adapter The Atmel® AVRISP MK2 (AVRISP MKII Communication Protocol) is an in- This is a simple, but extremely handy board to adapt the System Programmer for Atmel’s AVR® Flash microcontrollers. common 10-pin ISP programmers to the smaller 6-pin ISP connections and vice-versa. The AVRISP MK2 gives the designer a compact and reliable programming tool to program all In-System Programmable AVR microcontrollers through Also designed in is a 6-pin inline connector so that you a 6 pin ISP connector. The AVRISP MK2 uses AVR Studio®, Atmel’s Inte- can insert this board directly into a breadboard! Good for grated Development Environment (IDE) for code writing and debugging. the AVRISP-MKII. Pin 1 indicators indicate how the AVR- The programming software can be controlled from both a Windows® PG1 and PG2 should be oriented. Board comes bare. environment and a DOS command-line interface. Features: Price Each 1 • USB Serial In-System Programming PRG-002 AVR Programming Adapter $2.50 • Upgrades are done from AVR Studio • Target Voltage 2.7 to 6.0 V • Powered from Target. No Need for Additional Power Supply Olimex ICSP Breakout This is a breakout board to interface various ICSP cables to one another. This board will allow you to interface to the Olimex standard 6-wire ICSP, Olimex 6-pin mini-ICSP Price Each 1 (found on a few new boards), and the Microchip 6-pin RJ11 ICD and ICD2 connector. PRG-001 AVRISP-MKII in-system programmer $59.00 This product includes the board and three cables.There are many possible configurations, but here are a few AVR - ICSP Adapter examples: -- Microchip ICD/ICD2 to Olimex Dev Boards This is an adapter assembly that converts 2 5 × -- Olimex Programmers to PIC-mini-WEB pin connector to 2 × 3 pin mini-ICSP. Comes with a -- Olimex Programmers to Microchip boards with RJ11 connector on mini-ICSP cable terminated female at both ends. The board adapter board comes terminated as male 2 × 3 pin to female 2 × 5 pin. The cable is about 200 mm long. Price Each 1

PRG-013 Olimex ICSP breakout $5.95 Price Each 1 PRG-003 AVR - ICSP adapter $9.95 MPLAB Compatible ICD2 with USB PIC-ICD2-POCKET is the world’s smallest PIC ICD2 debugger and AVR Programmer programmer, with only 55 x 55 mm dimensions and only 30gr weight (without ICSP cable and packing). Peripheral freeze-on-halt stops tim- This is a low cost, easy to use USB AVR programmer. It works great with ers at breakpoints. Programs can be downloaded, executed in real time AVRDude, and is tested under Windows, Linux, and Mac OS X. and examined in detail with the debug functions of Based on Dick Steefland’s USBtiny and Limor Fried’s USBtinyISP. This MPLAB. programmer works really well for ATmega168 and ATmega328 ICs and Set watch variables and breakpoints from symbolic should work with all the AVR micros supported by AVRDUDE. We’ve played labels in C or assembly source code, and single step a bit with the ATtinys but we cannot guarantee that this board will be through C source lines or into assembly code. PIC- compatible with anything but ATmega168/328. ICD2-POCKET can also be used as a development This board is buffered and power protected so programmer for supported MCUs. The secret behind that you can do some really evil things to the In Circuit Debugging is two dedicated hardware lines programmer without killing it. It is fast! Compara- (microcontroller pins used only during debugging ble speed to the AVR ISP2 USB programmer. One mode) that control In Circuit Serial Programming™ (ICSP™) of the device of the greatest features of this board is the ability and, afterwards, debugging through proprietary, on-chip firmware. to power the target (up to 500 mA) from the pro- Features: grammer. Cable is about 200 mm long. • USB (Full Speed 2 M bits/s) interface to host PC • MPLAB IDE GUI (latest release available for free download from Micro- chip’s web site) Price Each 1 • Built in over-voltage/short circuit monitor • Firmware upgradeable from PC PRG-004 Pocket AVR Programmer $21.50 • Supports low voltage to 2.0 volts. (2.0 to 6.0 range) • Diagnostic bi-color LED (Busy, Error) Mobile STK500 AVR USB Programmer • USB power status green LED • Reading/Writing memory space and EEDATA areas of target microcon- AVR-ISP500-TINY has internal flash of 2 MB and can log AVRStudio com- troller. Erase of program memory space with verification munication and then replay it with single button push. Price Each 1 This allows you to load a HEX file on to the internal flash, and then quickly program multiple targets with a single button PRG-010 MPLAB Compatible ICD2 with USB $125.00 press.

Features: MPLAB Compatible ZIF Programmer - USB Powered • Connects to PC via USB 2.0 Full speed • STK500 compatible mode The latest and greatest from Olimex! It’s got all the power of the original • Mass Storage mode MCP with one less wire and a lot less weight. Now there is no need to wor- • Uses Atmel's 2 × 5 pin ICSP and 2 × 3 connec- ry about carrying around an extra power supply - all programming power tor layout is generated from the USB port! Tablet PC users unite! A low cost alternative to PicStart+. The MCP-USB is Price Each 1 MPLAB compatible and is fully recognized under MPLAB PRG-007 Mobile STK500 AVR USB Programmer $99.00 as a PicStart+ device. To operate it needs only a USB A to B cable. The MCP-USB includes a gold plated 40 pin ZIF socket which accepts all types of DIP PIC microcontrollers. In addition it has an ICSP connector and can be used to program all PIC-PxxB prototype boards.

Price Each 1

PRG-014 MPLAB compatible ZIF programmer-0USB powered $99.95

Ocean Controls Catalogue 2012 Page 51 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

PICKit 2 Microcontroller Programmer Picaxe Serial Programming Cable PICKit 3 Microcontroller Programmer Picaxe USB Programming Cable

The PICkit 2/3 Microcontroller Programmer is a low cost The serial cable allows the PICAXE to be connected programmer/debugger for Microchip PIC microcontrol- to any computer with a serial port. The folks at lers. It can program a large range of PIC chips from the PICAXE have developed a very convenient way to PIC10, PIC12, PIC16, PIC18 and PIC24 families. Addi- develop with PIC microcontrollers! By placing a small tionally it is firmware upgradeable, and Microchip regu- bootloader onto the IC, the user can download new larly releases new firmware to support new PIC chips. PICAXE code onto the IC over a serial connection. This cable has a standard DB9 connection on one Included in the package are the PICkit 2/3 Programming end, and a 3.5 mm audio connection on the other. Software, the MPLAB IDE Software, an A to mini-B USB cable, lessons for Works with all PICAXE development boards. programming PICmicro MCUs, and more. If you're looking to play with PICAXE microcontrollers Please note that this is the PICkit 2/3 programmer only and does not on a computer with only USB, look no further! The include any demo boards! PICKit 2 and 3 are very similar in features, with PICAXE USB programming cable allows PICAXE micros the only major difference being that PICKit 3 can program up to 512 K to be programmed from any platform (Windows and (Only 128 K for PICKit 2) and has support for the latest microcontrollers Linux). from Microchip. The cable has the FT232R embedded into the USB connector and will show up on your computer as a Price Each 1 new COM port. Under windows - you'll need to install some drivers but it's really easy! PRG-015 PICKit 2 micro-controller programmer $59.00

PRG-016 PICKit 3 micro-controller programmer $69.95 Price Each 1

PRG-030 Picaxe Serial Programming Cable $6.00 JTAG USB OCD Programmer/Debugger for ARM processors PRG-031 Picaxe USB Programming Cable $26.00 This is the mother of all JTAG Programmers for ARMs - and it's about 1/10th the price of other programmer/ debuggers with the same functionality! Bus Pirate Features: The Bus Pirate is a troubleshooting tool that commu- • First on market three-in-one USB JTAG debugger nicates between a PC and any embedded device over - offers JTAG + RS-232 (full modem signals sup- most standard serial protocols, which include I²C, SPI, ported) port + power supply all in one compact and asynchronous serial - all at voltages from 0 to 5.5 device VDC. This product eliminates a ton of early prototyping • Fast speed USB 2.0 JTAG dongle interface, can be used with all ARM devices for programming and effort when working with new or unknown chips. debugging. A miniB USB connector is on the board, and when you • Uses ARM's standard 2×10 pin JTAG connector plug it into your computer it will come up as a virtual COM port. A big • Supports ARM targets working in voltage range 2.0 to 5.0 V DC bonus is the bootloader installed on the PIC, which allows you to easily • Software supported by OpenOCD (open source) debugger update the firmware and change the functionality of the board. • Adds virtual RS-232 port to your computer with all modem signals like: DTR, DSR, DCD, RTS, CTS, Rx, Tx Supported protocols: • Comes with CD with Windows installer for full featured and open • 1-Wire, I²C, SPI, JTAG source tools. • Asynchronous serial, MIDI, PC keyboard, HD44780 LCD • 2- and 3-wire libraries with bitwise pin control • Scriptable binary bitbang, 1-Wire, I²C, SPI Price Each 1 Dimensions: 2.10 × 1.20” (53 × 30 mm) PRG-020 JTAG USB OCD Programmer/Debugger for ARM $75.00 The cable is designed to connect to its 2 × 5 I/O header on the Bus Pirate and provides individual cable ends. JTAG USB OCD Tiny - Programmer/Debugger for ARM processors Price Each 1 This is a low cost USB-based JTAG programmer for ARM processors based PRG-005 Bus pirate $33.95 on the OpenOCD platform. PRG-006 Bus pirate cable $5.95 Features: • Debug all ARM microcontrollers supported by OpenOCD • Fast speed USB 2.0 JTAG dongle interface. Can be used with all ARM devices for programming and Robotics & Motor Controllers debugging. • Uses ARM's standard 2x10 pin JTAG connector Pololu High Current Motor Driver • Supports ARM targets voltage range 2.0 to 5.0 V DC • Software supported by OpenOCD (open source) debugger The Pololu high-power motor drivers are • Comes with CD with Windows installer for full featured and open compact carriers for the VNH3SP30 and source tools as alternative to the commercial ARM VNH2SP30 motor driver integrated circuits • Development packages: GCC C compiler, openOCD debugger and from ST. The current for infinite run time is Eclipse IDE. 9 A in VNH3SP30 and 14 A in VHN2SP30. The current sense circuit is populated on Price Each 1 both versions of the board, but only the VNH2SP30 supports current sense. PRG-021 JTAG USC OCD Tiny- Programmer/debugger for ARM $22.95 processors

We endeavour to keep the Price Each 1 5+ stock levels shown on the website as ac- POL-705 30 A motor driver with VNH3SP30 $39.65 less 10% curate as possible. Most items we sell are POL-706 30 A motor driver with VNH2SP30 $47.60 less 10% kept in stock but some are ordered in a Just-in-Time process from a local supplier. Online ordering is available 24 Please call or email us if you need to know hours, 7 days a week, 365/366 days a year. what we have on hand.

Page 52 Ocean Controls Catalogue 2012 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

Qik 2s9v1/2s12v10 Dual Serial Motor Controller Pololu TReX Dual High Power Motor Controller The Qik 2s series is a small inexpensive motor The TReX can control two bidirectional and one controller allows any microcontroller or com- unidirectional motor via three independent control puter with a serial port (external RS-232 level interfaces: radio control (RC) servo pulses, analog converter required) or USB-to-serial adapter to voltage, and asynchronous serial (RS-232 or TTL). It easily drive brushed DC motors with full direc- uses five input channels to receive the RC or analog tion and speed control. The 2s9v1 (top right control signals. photo) is capable of driving two small brushed DC motors whereas the 2s12v10 (bottomr right When operating in RC or analog mode, the five photo) can drive two large brushed DC motors. channels function as follows: -- Channel 1: motor 1 speed and direction or, if in mix mode, turn Two status LEDs give visual feedback about the left/right serial connection and any encountered error -- Channel 2: motor 2 speed and direction or, if in mix mode, go conditions, making debugging easy, and a demo forward/reverse mode allows easy verification of proper opera- -- Channel 3: auxiliary (unidirectional) motor speed -- Channel 4: can be used to enable “flipped mode”, which allows in- tion. vertable robots to be controlled as normal when they are inverted Features: -- Channel 5: determines whether the motors are controlled by the • 4.5 to 13.5 V or 6 to 16 V motor supply channel inputs or the serial interface; this channel allows you to range. switch between autonomous and human control at will. • 1 A / 13 A maximum continuous current per motor (3 A/ 30 A peak). The serial interface can switch instantly with one of the other two inter- • 2.7 to 5.5 V logic supply range. faces, allowing mixed autonomous and remote control. • Logic-level, non-inverted, two-way serial control for easy connection to microcontrollers or robot controllers. • Serial error output to make it easier for the main controller to recover Price Each 1 5+ from a serial error condition. • Jumper-enabled demo mode allows initial testing without any pro- POL-777 TRexX dual motor controller $124.50 less 10% gramming. • Optional CRC error detection eliminates serial errors caused by noise or software faults. Pololu TB6612FNG Dual Motor Driver Carrier • Optional motor shutdown on serial error or timeout for additional safety. This tiny board is an easy way to use Toshiba’s • Supports daisy-chaining the qik to other qiks and Pololu serial motor TB6612FNG dual motor driver, which can independ- and servo controllers, allowing the control of up to hundreds of mo- ently control two bidirectional DC motors. In a tors and servos with a single serial line. typical application, power connections are made on • Reverse power protection on power supply only one side of the board and control connections are • High frequency PWM to eliminate switching induced motor shaft hum or whine made on the other. All of the control inputs are internally pulled low. Price Each 1 5+ Each of the two motor channels has two direction POL-1110 Qik 2s9v1 Dual Serial Motor Controller $29.95 less 10% control pins and a speed control pin that accepts a PWM input with a frequency of up to 100 kHz. The STBY pin must be POL-1112 Qik 2s12v10 Dual Serial Motor Controller $79.95 less 10% driven high to take the driver out of standby mode. Specifications: Pololu Dual High Current Motor Driver • Motor voltage (VMOT): 4.5 to 13.5 V • Logic voltage (VCC): 2.7 to 5.5 V The Pololu dual high-power motor drivers are compact carriers for the • Output current maximum: 3 A per channel VNH3SP30 and VNH2SP30 motor driver ICs. • Output current continuous: 1 A per channel (can be paralleled to deliver 2 A continuous) The board incorporates most of the components • Maximum PWM frequency: 100 kHz of the typical VNH2SP30 application including pull-up and current-limiting resistors and a FET for reverse battery protection. (The current Price Each 1 5+ sense circuit is populated on both versions of the board, but only the VNH2SP30 supports POL-713 Pololu TB6612FNG dual motor driver $12.95 less 10% current sense.) carrier To keep the number of I/O lines down, the two enable/diagnostic lines on each chip are tied together. All you need to add is a microcontroller or Pololu Jrk 21v3 USB Motor Controller with Feedback other control circuit to turn the H-Bridges on and off. The Pololu jrk 21v3 motor controller is a highly SKU POL-707 POL-708 configurable brushed DC motor controller. The controller can be used with feedback for closed- Time to overheat @20 A 8 seconds 35 seconds loop speed or position control, or it can be used Time to overheat @5 A 30 seconds 150 seconds without feedback as an open-loop speed control

Current for infinite run 9 A 14 A Features : time • Motor driver: MC33926 • Motor channels: 1 Maximum PWM fre- 10 kHz 20 kHz • Control interface: USB; non-inverted TTL quency serial; Power Supply 5.5 to 36 Volts 5.5 to 16 Volts • RC servo pulses; analog voltage • Minimum operating voltage: 5 V • Maximum operating voltage: 28 V Price Each 1 5+ • Continuous output current per channel: 3 A • Peak output current per channel: 5 A POL-707 Dual motor driver with VNH3SP30 $64.95 less 10% • Current sense: 0.5 V/A POL-708 Dual motor driver with VNH2SP30 $77.95 less 10% • Maximum PWM frequency: 20 kHz • Minimum logic voltage: 4 V • Maximum logic voltage: 5 V Deliveries in Australia up to 5 kg are shipped • Reverse voltage protection: Y by Express Post, Couriers Please and Toll Price Each 1 5+ which means if the goods are in stock you will POL-1392 Jrk 21v3 USB motor controller with $59.95 less 10% Feedback usually receive them in 1-2 business days.

Ocean Controls Catalogue 2012 Page 53 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

Pololu Jrk 12v12 USB Motor Controller with Feedback Pololu High-Power Motor Driver 18v25/24v20 The powerful jrk 12v12 motor controller is a highly configurable brushed The Pololu high-power motor driver is a discrete DC motor controller that supports four interface modes: USB, logic-level MOSFET H-bridge designed to drive large DC serial, analog voltage, and hobby radio control (RC). It uses VNH2SP230 brushed motors. The H-bridge is made up of motor driver with 1 motor channel. It comes with a USB interface and two N-channel MOSFET per leg, and most of non-inverted TTL serial. On board is a reverse voltage protection the board’s performance is determined by these MOSFETs (the rest of the board contains the Specifications: circuitry to take user inputs and control the • Minimum operating voltage: 6 V MOSFETs). Under normal operating conditions, • Maximum operating voltage: 16 V ripple voltage on the supply line can raise the • Continuous output current per channel: 12 A maximum voltage to more than the average or • Peak output current per channel: 30 A intended voltage, so a safe maximum voltage is approximately 24 V. • Current sense: 0.13 V/A • Maximum PWM frequency: 20 kHz With the addition of a heat sink, it can drive a motor with up to 40 A of • Minimum logic voltage: 4 V continuous current. The module offers a simple interface that requires as • Maximum logic voltage: 5 V little as two I/O lines while allowing for both sign-magnitude and locked- antiphase operation. Integrated detection of various short-circuit conditions protects against common causes of catastrophic failure; however, Price Each 1 5+ please note that the board does not include reverse power protection or any over-current or over-temperature protection. POL-1393 Pololu Jrk 12v12 USB motor controller $119.95 less 10% with feedback SKU POL-758 POL-759 18v15 USB Motor Controller Motor Channels 1 The Pololu Simple Bidirectional High-Power Motor Controller makes basic Minimum operating voltage 5.5 V control of brushed DC motors easy, with our free Simple Motor Control Maximum operating voltage 30 V 40 V Center software enabling quick configuration over USB. Continuous output current per channel 25 A 20 A (without heatsink) This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 15 A Peak output current per channel 250 A 200 A without a heat sink. It ships with the power Maximum PWM frequency 40 kHz capacitor and connectors included but not soldered in, allowing for custom installations. Maximum logic voltage 5.5 V

Features: Reverse voltage protection No • 7 A to 25 A maximum continuous current output without a heat sink, depending on controller model. Dimensions 1.8" × 0.8" • Four communication or control option: -- USB interface for direct connection to a PC. Price Each 1 5+ -- Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers. POL-758 Pololu high-power motor driver 18v25 $64.95 less 10% -- Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller. POL-759 Pololu high-power motor driver 24v20 $69.95 less 10% -- 0 to 3.3 V analog voltage interface for direct connection to potentiometers and analog joysticks. • Simple configuration and calibration over USB with free configuration KTA-194 DC Motor PID Speed Controller program (Windows 7, Vista, Windows XP, and Linux compatible). The KTA-194 provides feedback control of DC Motors. It can operate in Closed Loop PID mode allowing accurate Price Each 1 5+ speed control over different loads or in Open Loop PWM POL-1377 18v15 USB Motor controller $45.95 less 10% mode. Target Speed and PID settings can be set via the 3 Pushbuttons and LCD, the Serial Port or Analog Input 9/15 A Pololu High Power Motor Driver (potentiometer). Serial Port control allows you to control a number of controllers from the one serial port on your The Pololu 9/15 A high-power motor driver is a discrete MOSFET H-bridge PC. designed to drive one DC brushed motor. The H-bridge is made up of one With this kit you can control the speed of a common DC motor rated up to N-channel MOSFET per leg and most of the board’s performance is deter- 55 V/ 20 A without sacrificing motor torque. Operates on a supply voltage mined by these MOSFETs (the rest of the board contains the circuitry to of 8 V to 26 V. It uses a microcontroller to pulse-width modulate two high take user inputs and control the MOSFETs). The board is efficient enough current power IRFZ44 MOSFETs to provide high torque DC Motor Speed to deliver a continuous 21 A with a heat sink, without heatsink it is capa- Control. Feedback is achieved with a Photo-Interrupter Pulse (Provided). ble of 9 A or 15 A continuous current output. With the PWM pin held low, both motor outputs will be held low (a brake Price Each 1 5+ operation). With PWM high, the motor outputs will be driven according to the DIR input. This allows two modes of operation: sign-magnitude, KTA-194 DC motor PID speed controller $105.00 less 10% in which the PWM duty cycle controls the speed of the motor and DIR controls the direction, and locked-antiphase, in which a pulse-width-modulated signal is applied to the DIR pin with PWM held high. High Current DC Motor Speed Controller Note: Not suitable for 24V DC Battery for POL-756 This DC motor controller uses PWM Pulse Width Modula- tion to control the speed of a DC motor. A potentiometer Features: can be used to set the speed or a 0 to 5 VDC signal can • IRF7862PBF MOSFETs Motor Driver be supplied. • Operating Voltage: 5.5 to 44 V / 5.5 to 24 V With this controller you can control the speed of a com- • 1 Motor Channel mon DC motor rated up to 55 V/ 20 A without sacrificing • Peak output current: 100/170 Amps motor torque. Operates on a supply voltage of 8 V to • Max PWM frequency: 40 kHz 26 V. • MOSFET on-resistance: 10 m / 3.7 mΩ Ω Uses a microcontroller to pulse-width modulate two high current power Warning: This motor driver has no over- IRFZ44 MOSFETs to provide high torque DC Motor Speed Control. This current or over-temperature shut-off. Either condition can cause controller is suitable for controlling Golf Buggy DC Motors. permanent damage to the motor driver. Dimension(mm): 100W × 100L × 40H mm.

Price Each 1 5+ Price Each 1 5+

POL-756 High Currennt DC motor driver 44 V 9 A $79.50 less 10% KTA-195 High current DC motor controller $79.00 less 10%

POL-755 High current DC motor driver 24 V 15 A $74.50 less 10%

Page 54 Ocean Controls Catalogue 2012 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

Serial/Modbus High Current DC Motor PWM Speed KTA-246 Mini DC Motor Speed Controller in Box Controller With this controller you can control the speed of any common DC motor The operation of this 20A DC Motor Speed Con- rated up to 35 V and 8 A without sacrificing troller is configured using a serial port of a PC. It motor torque. Operates on a supply voltage has 4 different modes of operation. of 8 V to 35 V. -- Mode 0 (KTA-207)- Speed is set by ASCII commands received from a serial Uses a microcontroller to accurately pulse- RS-232 connection. Up to 4 Speed Con- width modulate a high current power trollers can be addressed and controlled MOSFET, IRFZ44. Also features adjustable from a single PC or microcontroller serial acceleration time, potentiometer, 0 to 5 V port. or 4 to 20 mA input signal control. Die Cast -- Mode 0 (KTM-207) - Speed is set by Box mounted with finished dimension of 35 Modbus RTU commands received from a Modbus Master. The modbus address of × 89 × 30 mm. the motor controllers can be assigned allowing multiple controllers to be controlled by a PLC or SCADA Host Price Each 1 5+ -- Mode 1 - 4 selectable speeds can be chosen using a 4 position rotary switch KTA-246 Mini DC motor speed controller $69.00 less 10% -- Mode 2 - Motor speed is controlled by a 1 to 2 mS RC Pulse. -- Mode 3 - Motor speed is controlled by a PWM pulse stream received from a PLC or microcontroller KTA-271 UniDirectional Motor Driver With this kit you can control the speed of a common DC motor rated up to KTA-271 is a small pulse width modulation 55 V (20 A) without sacrificing motor torque. The controller logic operates (PWM) motor driver. It can drive motors on a supply voltage of 8 V to 26 V. PWM Frequencies of 9.7 KHz, 1.2 KHz, up to 24 V and 5 A. The PWM frequency is 152 Hz and 38 Hz can be selected using a serial command. configurable using DIP switches on the board and the PWM duty cycle is controlled by an A straight through D9 Male to Female serial cable is required to configure analog input. and communicate with the controller via a PC. The PC software supplied is a Visual Basic program with source code provided for you to be able to The driver accepts 0/4 to 0 mA and 0 to 5/10 write your own programs to control the motor from your PC. V analog input signals. Heatsink mounted with dimensions of 42W × 72L × 15H

Price Each 1 5+ Price Each 1 5+ KTA-207 Serial high current DC motor controller $89.00 less 10% KTA-271 UniDirectional Motor Driver $69.00 less 10% KTM-207 Modbus high current DC motor controller $99.00 less 10% KTM-198 Dual Bidirectional DC Motor Speed Controller Kxx-067 DC Motor Speed Controller This Motor Speed Controller allows a user to control the speed of up to With this popular kit control the speed of any common DC two DC Motors independently, using an analog 0 motor rated up to 100 V (5A) without sacrificing motor torque. to 5 V signal, potentiometers, serial port of a PC Operates on a supply voltage of 5 V to 15 V. Uses NE556 to or 1 to 2 mS RC Pulse. pulse-width modulate a high current power MOSFET, IRFZ44. The controller communicates using the Modbus In this way motor torque is maintained. Adjustable speed con- RTU protocol over a RS-232 connection and trol with a potentiometer. Box mounted. controls the speed of up to two DC Motors Finished Dimensions (mm): 60W × 100L × 30H. independently Features: Price Each 1 5+ • Operates in Analog or Pulse Mode (Each motor can be operated in KIT-067 DC motor speed controller kit $26.50 less 10% Unidirectional mode or Bidirectional mode under these modes) • Unidirectional Mode: 0 to 5 V analog input (or 1 to 2 ms pulses) sets KTA-067 DC motor speed controller assembled $44.00 less 10% 0-100% PWM and a digital Input to select direction • Bidirectional Mode: 2.5 to 5 V (or from 1.5 mS to 2 mS) turns motor in one direction, 2.5 to 0 V (or 1.5 mS to 0 mS) turns it in opposite Kxx-166 Bidirectional DC Motor Speed Controller direction • PWM Freq set by serial command to 10KHz, 1.25KHz and 156Hz This kit controls the speed of a DC motor in both the forward and reverse • Dimensions 75 × 105 × 20 mm direction using pulse width modulation PWM. The range of control is from fully OFF to fully ON in both directions. The The controller can be purchased with a 80 mm 12 VDC or 24 VDC Fan maximum voltage available to run the motor is 32 VDC. fitted. Adjustable speed control with a potentiometer. Adjustable speed control with a potentiometer. Price Each 1 5+

KTM-198 Dual bidirectional DC motor speed $99.00 less 10% Price Each 1 5+ controller

KIT-166 Bidirectional DC motor speed controller kit $34.50 less 10%

KTA-166 Bidirectional DC motor speed controller $49.50 less 10% Pololu Micro Serial Servo Controller assembled The Pololu micro serial servo controller is a very compact solution for controlling up to eight radio control (RC) servos KTA-198 Dual Bidirectional DC Motor Speed Controller from a computer or microcontroller. The controller measures just 23 × 23 mm, yet it is one of the most This DC motor controller allows you to control the full-featured servo controllers available. speed of two DC motors independently. Each motor Each servo speed and range can be controlled inde- can be operated in unidirectional mode with a 0 pendently, the baud rate is detected automatically to 5 V input giving 0 to 100% PWM and a digital over a 1200 to 38400 bps range, and multiple units input for direction selection, or in bidirectional mode can be daisy-chained on one serial line to control up where the analog input is responsible for direction to 128 servos. and speed selection. Three status LEDs and an integrated level converter for RS-232 applica- A link allows you to control the speed from a 0 to 20 mA or 4 to 20 mA tions get you up and running quickly. The micro serial servo controller signal. A serial command allows you to set the PWM frequency to 10 KHz, is dwarfed by even a standard servo, but it can control any standard RC 1.25 KHz or 156 Hz to suit your application. servos, including giant 1/4-scale servos.

Price Each 1 5+ Price Each 1 5+ KTA-198 Dual bidirectional DC motor controller $79.00 less 10% POL-207 Pololu micro serial servo controller $30.40 less 10%

Ocean Controls Catalogue 2012 Page 55 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

Pololu Serial 8 Servo Motor Controller Variable Speed Drive 240 VAC 0.7/1.5/2.2 KW Single The Pololu serial 8-servo controller allows you to control Phase Input up to eight RC servos with almost any robot controller or The VFD-EL series is Delta Electronic's newest VFD computer. family member. The VFD-EL is an IP20 rated drive The interface to the servo controller is a standard RS-232 ranging from 0.2 to 3.7 KW with input voltages serial port or a TTL-level serial line, using any baud rate ranging from 110 VAC to 460 VAC.The compact between 1200 and 38400 baud. Multiple 8-servo controllers multi-functional drive series has a high-efficiency can be connected to a single serial line to control up to 128 thermal design which allows for “zero stack” and servos independently. din rail mount for space saving optimization. The optional Fieldbus Modules provide connection Price Each 1 5+ to a variety of networks used in many applications including: Blowers, Conveyer Systems and Simple Processing Equipment, just to name a few. POL-727 Serial 8 servo motor controller $38.10 less 10% Specifications: • Output frequency: 0.1 ~ 600 Hz Kxx-102 RC Servo Motor Controller • 3 points adjustable V/f curve • Built-in PID feedback control This PIC Servo Motor Driver can simultaneously drive up to four servo mo- • RFI-switch for IT mains tors using potentiometers as positioning controllers. • Built-in EMI filter (for models 230 V 1-phase and 460 V 3-phase) Each motor is positioned by rotating a potentiometer • Use RS-485 communication interface (RJ-45) with Modbus protocol which is connected to the input of the microcontrol- • Optional communication modules for multiple communication proto- ler. cols, such as Profibus, DeviceNet, LonWorks and CANopen • Complete protection function You need one potentiometer per motor. The PIC Servo Motor Driver uses a PIC16C71. All the work is done in the micro- Price Each 1 controller. Servo-motors & potentiometers not supplied. Power Supply Required: 5 VDC/1 A. PCB: 75 × 50 mm. DEM-003 Variable Speed drive 240VAC 0.7 KW single phase $249.00 input

Price Each 1 5+ DEM-005 Variable Speed drive 240 VAC 1.5 KW single phase $309.00 input KIT-102 RC servor motor controller as KIT $32.50 less 10% DEM-007 Variable Speed drive 240VAC 2.2 KW single phase $449.00 KTA-102 RC servor motor controller assembled $42.50 less 10% input

KTA-199 8 Servo Motor Controller Variable Speed Drive 0.7/1.5/2.2/3.7 KW Three Phase Our 8 RC Servo Motor Controller can be configured Input to control 4 RC servo motors by switches (motor moves to two different positions based on a switch) The VFD-EL series is Delta Electronic's newest VFD and 4 servos via RS-232 ASCII serial commands. family member. The VFD-EL is an IP20 rated drive ranging from 0.2 to 3.7 KW with input voltages rang- Being able to control the position of the servos by ing from 110 VAC to 460 VAC.The compact multi- a switch allows a servo motor to be used easily in functional drive series has a high-efficiency thermal open - closed situations such as road or door bar- design which allows for “zero stack” and din rail riers. It is perfect for use with model trains, hobby mount for space saving optimization. models, robotics and industrial production. Features: The card can easily be configured to have all 8 servos controlled serially. • 0.1 to 600 Hz Output frequency Up to 4 boards can be operated off the one PC serial port allowing up to • IGBT based sinusoidal PWM control with 3 point adjustable V/f curve 32 motors to be controlled. • Built-in PID feedback control • Built-in EMI filter with RFI-switch for IT (isolated) mains • Auto-torque / auto-slip compensation Price Each 1 5+ • 3 skip frequency zones to avoid resonances and potential machine damage KTA-199 8 servo motor controller assembled $55.00 less 10% • S-curve acceleration and deceleration • Auto acceleration and deceleration by live sensing of torque Pololu Micro Maestro 6-channel USB Servo Controller Price Each 1 The six-channel Micro Maestro takes serial servo controllers to the next level by incorporating native DEM-013 Variable Speed drive 0.7 KW Three phase input $349.00 USB and internal scripting control. DEM-015 Variable Speed drive 1.5 KW Three phase input $375.00 Whether you want the best servo controller available (0.25 μs resolution with built-in speed and ac- DEM-017 Variable Speed drive 2.2 KW Three phase input $499.00 celeration control) or a general I/O controller (e.g. DEM-019 Variable Speed drive 3.7 KW Three phase input $639.00 to interface a sensor to your USB port), this tiny, versatile controller will deliver. The fully assembled version ships with header pins installed. KTA-190 Serial Stepper Motor Controller Features: Connects to the PC serial port and provides an easy to use interface for • Three control methods: USB, TTL (5V) serial, and internal scripting connecting and controlling stepper motors by your PC. You can connect • 0.25 μs output pulse width resolution (corresponds to approximately up to four stepper motor drivers to the card using their step and direction 0.025° for a typical servo, which is beyond what the servo could inputs. You can multidrop up to 4 interface cards off the 1 RS-232 serial resolve) line so you can control up to a total of 16 stepper motors. • Pulse rate configurable from 33 to 100 Hz • Wide pulse range of 64 to 3280 μs when using all six servos with a Simple ACSII commands are sent to the card to pulse rate of 50 Hz control each of the stepper motors. Allows ac- • Individual speed and acceleration control for each channel celeration and deceleration of the motors and limit switches can be connected to the card. Positions • Channels can also be used as general-purpose digital outputs or analog inputs can be between -99999999 and 99999999 steps. The user can also set the acceleration and decelera- • A simple scripting language lets you program the controller to per- form complex actions even after its USB and serial connections are tion rates when starting and ending a sequence of removed steps. Limit switch inputs are available for each of the motors to prevent motors moving out of range.

Price Each 1 5+ Price Each 1 5+ POL-1350 Micro Maestro 6-channel USB servo con- $35.00 less 10% troller (assembled) KTA-190 Serial Stepper Motor controller 12 VDC $65.00 less 10%

KTB-190 Serial Stepper motor controller 24 VDC $65.00 less 10%

Page 56 Ocean Controls Catalogue 2012 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

KTx-290 USB Serial Stepper Motor Controller KTA-208 Dual Pulse Generator Our new KTx-290 is a a major upgrade to our popular KTA-190. Fitted The KTA-208 is a dual frequency generator card. Serial commands con- with the new XMega microcontroller it connects to the PC USB serial port figure the card. Once set up, the output frequency can be set by a serial and provides an easy to use interface for connecting and controlling step- command, an analog voltage (pulse generator 1 only) or the state of the per motors by your PC. A free PC program (source code in VB is included) digital inputs. The pulse outputs are coupled with direction outputs. The is provided so that you can execute a number of commands and repeat direction outputs are high when the output frequency is positive and low the process. when it is negative. This allows for convenient connection to a stepper or servo motor driver. Each dual frequency generator is addressable and up Features: to four can be connected to the same serial port. • Controls 4 Stepper Motors Simultaneously • USB Virtual COM or RS-485 Input Features: • Easily connect multiple units far apart by • 0 to 5 V Square wave pulses RS-485 • RS-232 9600, 8N1 ASCII Serial Controlled • Baud Rate Selectable • Add more units to control up to 16 Motors • Add more units to control up to 16 Motors • Up to 100 KHz for each pulse output. • Up to 40 KHz Max Stepping Rate • Ramp up and down adjustable • Parameters can be stored in Non-Volatile • Parameters are be stored in EEPROM EEPROM • 5 V Pulse and Direction Signal Levels • Limit Switch Input for Each Motor • 5 V Output for Opto-Coupler Drive • 5 V Step and Direction Signal Levels • 2 SPST 5 A Relays for Control • XOR Checksum Option • 12 V or 24 VDC Powered • 5 V Output for Opto-Coupler Drive • Up to 4 cards off the 1 serial port. • 2 SPST 5 A Relays for Control • 12 V or 24 VDC Powered Price Each 1 5+ Price Each 1 5+ KTA-208 Dual pulse generator 12 V $65.00 less 10% KTA-290 USB Serial Stepper Motor controller 12 $79.00 less 10% VDC KTB-208 Dual pulse generator 24 V $65.00 less 10%

KTB-290 USBSerial Stepper motor controller 24 $79.00 less 10% VDC KTx-253 12.5kHz Relay Card The KTA-253 Relay Card is designed to sense a 12.5 kHz Charge Pump or KTA-193 Modbus Programmable Stepper Motor Controller Heartbeat signal from a CNC controller and activate the relay when the signal is present. Mach 3 and other CNC controllers can provide this signal This standalone 4 axis stepper motor controller can be as a safety feature. Should the controller fail or the computer hang, crash programmed via a PC using supplied software or alterna- or lose power, the signal disappears. The KTA-253 is designed as a safety tively controlled via a PLC to free the PLC from complex system to shut down CNC equipment in the event of controller failure, but stepper motor control routines. Up to 4 cards can be controlled from a PLC using the Modbus protocol. also has other uses like preventing erratic movement as Windows starts up and polls the parallel port. Up to 120 instructions can be programmed into the controller (1 motor, 50 instructions for 4 motors) and Features: retained through power loss. Just program once and then • 3.3 V and 5 V input signal compatible let it go. Ideal for repetitive process tasks involving stepper motors, the • On-board 5 A SPDT relay unit can also be configured with up to 6 simple digital outputs (when the • Auxiliary coil output for larger relay outputs are not being used for motor control) and 4 digital inputs which • 12 V and 24 V versions can be used for limit switches or program control. • DIN rail mount option

Price Each 1 5+ Price Each 1 5+

KTA-193 Modbus programmable stepper motor $119.00 less 10% KTA-253 12.5 kHz relay card 12 V card $35.00 less 10% controller KTB-253 12.5 kHZ relay card 24 V card $35.00 less 10% KTB-193 Modbus Programmable stepper motor $119.00 less 10% controller KTC-253 12.5 kHz relay card 12 V card DIN rail $48.50 less 10% mount

KTD-253 12.5 kHz relay card 24 V card DIN rail $48.50 less 10% KTA-205 Parallel Port Interface Card with Relays mount The main circuitry consists of two buffer IC's which boost the weak parallel port signals to a level high enough to drive Stepper Motor Driver Circuits which use Opto-Couplers. Kxx-179 Unipolar Stepper Motor Driver With the safety charge pump option the board Standard circuit to drive 5, 6 or 8 wire unipolar also includes a microcontroller which monitors the stepper motors. Can be operated in free-standing CNC software and turns off the relays and output (internal oscillator) or PC-controlled (direction, signals when the charge pump signal from the CNC step) mode. software is lost. Uses IRFZ44 power MOSFETs to drive the mo- The Breakout Board provides 9 buffered output tors. These MOSFETs have a low on resistance signals to control up to 4 Stepper Motor Drivers, 5 digital inputs designed for use as limit switch or and can and can carry 6 A each without needing e-stop inputs, 2 Relay Outputs to control spindles, a heatsink. Separate supply voltage for kit and motors required. Re- coolant or vacuums, and a spare output connected directly to the port quires ballast resistors or adjustable voltage supply to match motor. (useable only in the version without charge pump).The Breakout Board is available with 12 V or 24 V relays and requires power at the relay voltage. Price Each 1 5+ Features: • 4 Axis CNC Breakout Board KIT-179 Unipolar stepper motor driver as kit $25.00 less 10% • Step, Direction and Limit Switch Connections for Each Axis • 3 Extra IO for further Expansion KTA-179 Unipolar stepper motor driver assembled $39.00 less 10% and tested

Price Each 1 5+

KTA-205 Parallel Port interface with 12 V relays $45.00 less 10%

KTB-205 Parallel port interface with 24 V relayz $45.00 less 10%

KTC-205 Parallel port interface, 12 V relays with $45.00 less 10% charge pump

KTD-205 Parallel port interface, 24 V relays with $45.00 less 10% charge pump

Ocean Controls Catalogue 2012 Page 57 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

M542 Microstepping Bipolar Stepper Driver DM556 Digital Microstepping Bipolar Stepper Motor Driver The M542 is suitable for a wide range of stepping motors of Nema 17 and The DM556 is a versatile fully digital stepping driver based on a DSP with 23, and usable for various kinds of machines, such as advanced control algorithm. It brings a unique level of system smooth- X-Y tables, labeling machines, laser cutters, engraving ness, providing optimum torque and nulls mid-range instability. machines, and pick-place devices. Extremely suitable for applications excepted to be low vibration, high speed Tuning software is freely available which allows your PC to serially connect and high precision to the drive and tune the performance of your motor. The driven motors can then run with much lower noise, less heating, smoother movement Features: than most of the drivers in the market. What’s more, owing to its higher • Patented technology performance DSP, driven motors can achieve much higher speed (above • Low cost, high torque under high speed condition 3000RPM), offering servo-like performance. • Supply voltage +20 to +45VDC, • Adjustable peak current 0.54 to 4.2A Features: • 3-state current control technology • Anti-Resonance, provides optimum torque and nulls mid-range instability • The current semi-reduction automatically switches in on absence of clock pulses CP • Microstep resolutions programmable, from full-step to 102,400 steps/ rev • Suitable for 2-phase and 4-phase stepping motors • Supply voltage up to 50 VDC • Optically isolated input signals • Output current programmable, from 0.5 to 5.6 A • Pulse frequency up to 400 KHz • Pulse input frequency up to 200 kHz • 15 selectable resolutions up to 25000 steps/rev • TTL compatible and optically isolated input • DIP switch current setting with 7 different values • Automatic idle-current reduction • PUL/DIR & CW/CCW mode optional • Suitable for 2-phase and 4-phase motors • Short-circuit, over-voltage, short-voltage protection • Support PUL/DIR and CW/CCW modes • Small size (118x75.5x33mm) • Over-voltage, over-current, phase-error protections

Price Each 1 5+ Price Each 1 5+ SMC-003 M542 Micro-stepping stepper motor $99.00 less 10% SMC-007 DM556 Micro-stepping stepper motor $145.00 less 10% controller controller

M415 Microstepping Bipolar Stepper Driver DM432 Digital Microstepping Bipolar Stepper Motor The M415B is a very small size high performance microstepping driver. Drivers It is suitable for driving any 2-phase and 4-phase hybrid stepping motors. By using an advanced bipolar constant- The DM432 is a versatile fully digital stepping driver based on a DSP with current chopping technique, it can output more speed and advanced control algorithm. It brings a unique level of system smooth- power from the same motor, compared with traditional ness, providing optimum torque and nulls mid-range instability. technologies such as L/R drivers. Motor auto-identification and parameter auto-configuration technol- Features: ogy offers optimum responses with different motors and easy-to-use. • Supply voltage 18 to +36 VDC The driven motors can run with much smaller noise, lower heating, • Output current adjustable from 0.1 A to 1.5 A smoother movement than most of the drivers in the markets. • Inaudible 20khz chopping frequency Features: • TTL compatible and optically isolated input signals • Anti-Resonance, provides optimum torque and nulls mid-range insta- • Automatic idle-current reduction bility • Mixed-decay current control for less motor heating • Microstep resolutions programmable, from full-step to 102,400 steps/ • 7 selectable resolutions (1,2, 4, 8, 16, 32, 64) rev • Microstep resolution can be changed on the fly • Supply voltage up to +40 VDC • Suitable for 2-phase and 4-phase stepping motors • Output current programmable, from 0.3 A to 3.2 A • Reverse polarity protection • Pulse input frequency up to 200 KHz • TTL compatible and optically isolated input The M415B is suitable for a wide range of stepping motors of size Nema • Automatic idle-current reduction 16, 17 and 23, and usable for various kinds of machines, such as X-Y ta- • Suitable for 2-phase and 4-phase motors bles, labeling machines, laser cutters, engraving machines, and pick-place • Support PUL/DIR and CW/CCW modes devices. Suitable for applications which need low vibration, high speed • Over-voltage, over-current, phase-error protections and high precision.

Price Each 1 5+ Price Each 1 5+ SMC-008 DM432 Micro-stepping stepper motor $89.00 less 10% SMC-006 M415 Micro-stepping stepper motor $75.00 less 10% controller controller

DM422C Digital Microstepping Motor Drive ND556 Microstepping Bipolar Stepper Driver The new DM422C replaces Leadshines popular M325 drive. It is a ver- The ND556 is a high performance microstepping driver using pure-sinusoi- satile fully digital stepping driver based on a DSP with advanced control dal wave current control technology, it is particularly suitable for applica- algorithm. tions which require extremely low noise and low heating. The ND556 is suitable for a wide range of stepping motors of NEMA 17, 23 and 34 size. Features: • Anti-Resonance, provides optimum torque and Features: nulls mid-range instability • Pure-sinusoidal precise current control technology • Microstep resolutions programmable, from full- • Extreme low motor noise step to 102,400 steps/rev • Both driver and motor low heating • Supply voltage: 20 to +36 VDC • High performance, low cost • Output current programmable, from 0.3A to • Supply voltage 20 to 45 VDC 2.2A • Adjustable peak current 1.4 to 5.6 A • Pulse input frequency up to 75 KHz • Current semi-reduction automatically switches on • TTL compatible and optically isolated input in absence of clock pulses • Automatic idle-current reduction • Suitable for 4,6,8 lead motors • Suitable for 2-phase and 4-phase bipolar motors • Optically isolated input signals • Support PUL/DIR and CW/CCW modes • Pulse frequency up to 400 kHz • Over-voltage, over-current, phase-error protections

Price Each 1 5+ Price Each 1 5+

SMC-004 ND556 Micro-stepping stepper motor $129.00 less 10% SMC-010 DM422C Digital microstepping motor $79.00 less 10% controller drive

Page 58 Ocean Controls Catalogue 2012 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

AM882 Fully Digital Stepping Drive A4983 Stepper Motor Driver Carrier with Voltage Regula- This fully digital microstepping drive is based on a DSP with an advanced tors control algorithm that allows tuning of the current and The A4983 stepper motor driver carrier with volt- position feedback loops in the drive and allows you age regulators is a breakout board for Allegro’s to counter resonances that would otherwise stall the easy-to-use A4983 microstepping bipolar stepper motor. motor driver. The board has two voltage regula- The anti-resonance control algorithm produces smooth- tors (5 V and 3.3 V), eliminating the need for er motion and allows higher top speeds than other separate logic and motor supplies. microstepping driver systems. The AM882 includes The driver features adjustable current limiting sensorless stall detection to eliminate the cost of feedback device and and five different microstep resolutions. It oper- cabling. An alarm output goes active when the driver sense the motor has ates from 8 to 35 V and can deliver up to 2 A per coil. Connect a 4-wire stalled. (Stall detection is active when the motor is running >300 RPM.) stepper motor and a microcontroller and you've got precision motor Features: control! • Microstep resolutions programmable, from full-step to 102,400 steps/ This product is a carrier board or breakout board for Allegro’s A4983 rev DMOS Microstepping Driver with Translator; we therefore recommend • Supply voltage up to +80 VDC, Output current programmable, from 0.1A to 5.86 ARMS careful reading of the A4983 datasheet, before using this product • Pulse input frequency up to 200 kHz • TTL compatible and optically isolated inputs Price Each 1 5+ • Automatic idle-current reduction and software configured reduction rate POL-1202 A4983 Stepper Motor Driver carrier with $22.95 less 10% • Suitable for 2-phase and 4-phase motors voltage regulators • Support PULSE/DIRECTION and CW/CCW modes • Over-voltage, over-current, phase-error protections A4988 Stepper Motor Driver Carrier Price Each 1 This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; SMC-011 AM882 Fully Digital stepping drive $179.00 we therefore recommend careful reading of the A4988 datasheet before using this product. DM442 Fully Digital Stepping Drive This stepper motor driver lets you control one bipolar The driver is a current-chopping driver with a wide DC voltage input range stepper motor at up to 2 A output current per coil. and will suit a wide range of NEMA 17 to 24 motors. Features: Microstepping allows you to achieve fine precision from • Simple step and direction control interface your motor. The anti-resonance control algorithm pro- • Five different step resolutions: full-step, half-step, quarter-step, duces smoother motion and allows higher top speeds eighth-step, and sixteenth-step than other microstepping driver systems. • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper Features: motor’s rated voltage to achieve higher step rates • Multi-Stepping allows a low resolution step input • Intelligent chopping control that automatically selects the correct cur- to produce a higher microstep output for smooth rent decay mode (fast decay or slow decay) system performance • Over-temperature thermal shutdown, under-voltage lockout, and • Microstep resolutions programmable, from full-step to 102,400 steps/ crossover-current protection rev • Short-to-ground and shorted-load protection (this feature is not avail- • Supply voltage up to +40 VDC, Output current programmable, from able on the A4983) 0.3 A to 3.0 A RMS • Like nearly all our other carrier boards, this product ships with all • Pulse input frequency up to 200 kHz surface-mount components — including the A4988 driver IC — in- • TTL compatible and optically isolated inputs stalled as shown in the product picture. • Automatic idle-current reduction and software configured reduction rate • Suitable for 2-phase and 4-phase motors Price Each 1 5+ • Over-voltage, over-current, phase-error protections POL-1182 A4988 Stepper Motor Driver Carrier $19.50 less 10% • Support PULSE/DIRECTION and CW/CCW modes

Price Each 1 EasyDrive Bipolar Stepper SMC-012 DM442 Fully digital stepping drive $79.95 The EasyDriver is a simple to use bipolar stepper motor driver, compatible with anything that can output a digital 0 to 5 V pulse. The EasyDriver has an on board voltage regulator for the digital interface. EasyDriver drives DM856 Digital Microstepping Bipolar Stepper Motor Driver as bi-polar. I.e. 4, 6 or 8 wire stepper motors. The DM856 is a versatile fully digital stepping driver based on a DSP with The microstep select (MS1 and MS2) pins of the A3967 are broken out al- advanced control algorithm. Motor auto-identification and parameter auto- lowing adjustments to the microstepping resolution. The sleep and enable configuration technology offers optimum responses with different motors pins are also broken out for further control. and easy-to-use. Caution: Do not connect or disconnect a motor while the driver is ener- The driven motors can run with much smaller noise, lower heating, gized. This will cause permanent damage to the A3967 I smoother movement than most of the drivers in the markets. Compared to the DM432, broader input voltage and output current ranges mean the Features: DM856 can drive more motors than the DM432. • A3967 micro-stepping driver • MS1 and MS2 pins broken out to change microstepping resolution to Features: full, half, quarter and eigth steps • Multi-Stepping allows a low resolution step input to produce a higher • Compatible with 4, 6, and 8 wire stepper motors mi-crostep output for smooth system performance • Adjustable current control from 150 mA/phase to • Microstep resolutions, from full-step to 102,400 steps/rev 750 mA/phase • Supply voltage up to 80 VDC • Power supply range from 7 V to 30 V. • Output current programmable, from 0.5 to 5.6 A • Pulse input frequency up to 200 kHz • TTL compatible and optically isolated input • Automatic idle-current reduction • Suitable for 2-phase and 4-phase motors • Support PUL/DIR and CW/CCW modes • Over-voltage, over-current, phase-error protections Price Each 1 5+

SMC-020 Easydrive bipolar stepper $16.50 less 10% Price Each 1 5+

SMC-009 DM856 Micro-stepping stepper motor $189.00 less 10% controller

Ocean Controls Catalogue 2012 Page 59 OCEANROBOTICS & MOTOR CONTROLS CONTROLLERS

KTA-191 Bipolar Chopper Stepper Motor Driver Kit DCS303 Brushed DC Servo Motor Driver Our simple bipolar chopper drive allows you to get better performance The DCS303 is a digital brushed DC servo motor driver with DSP and ef- from your stepper motor. ficient MOSFET technologies. It accepts pulse and direction input signals and can be used as a drop-in replacement for stepper motor-based It uses a dual full bridge motor driver based on the L297 systems. & L298. Motor current for each phase is set using an on-board potentiometer and the controller is capable of Features: handling motor winding currents up to 2 A per phase. • 18 to 30 VDC, Output Current: 3 A (Cont.), 15 A (Peak), Power range: 5 to 90W It operates from a DC supply voltage of 9 to 36 V. The • Based on DSP control technology and smooth drive provides all basic motor controls, including full or half stepping of bi- servo control algorithm polar steppers and direction control. Works with our range of large bipolar • PC based and handheld configuration tools, includ- stepper motors ing Pro Tuner and STU • Feedback resolution ×4 encoder line count Signals (Step, Direction, Enable) can be interfaced to external logic or a • Position Following error lock range adjustable microcontroller. Can easily control the motor from your computer’s parallel • Position error can be eliminated to 1 count, and Velocity error can be port or our serial stepper controller card! eliminated to the Desired Velocity ±0.3% • Electronic gear ratio from 1/255 to 255 • Built-in motion controller for self-test with trapezoidal velocity profile Price Each 1 5+ • Support PULSE/DIR and CW/CCW control signals • Opto-isolated inputs, support single-ended and differential signals KTA-191 Bipolar Motor chopper drive assembled $59.00 less 10% • 10 latest errors self-record function • Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections DCS920 Analog Brushed DC Servo Driver • Small size, surface-mount technology • CE certified, Over-current and short-circuit protection The DCS920 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. The drive can interface with digital controllers or be used stand-alone and Price Each 1 5+ requires only a single unregulated DC power supply. SMC-245 DCS-303 Servo motor driver $125.00 less 10% Input (Ref) gain, Tach Gain, Loop gain, Integrator Frequency and Offset can be adjusted using 26-turn potentiometers. ACS606 Brushless Servo Motor Driver The offset adjusting potentiometer can also be used The ACS606 can offer high precision, high speed and high reliability as an on-board input signal for testing purposes. Fur- performance, and widely used in inkjet printers, engraving machines, and thermore, 3 red/green LEDs indicate operating status for faster setup. The etc. A built-in controller can be used for testing and tuning. PC based and drive is fully protected against over-voltage, under voltage, over-current, handheld configuration & tuning tools can meet different tuning environ- short-circuits from output to output, and over-temperature. ments or requirements. The ACS606 can drive both DC brushless and AC Features: servo motors, but it is more suitable for the DC brushless servo motors. • High Performance and Cost-effective; 3 kHz bandwidth Features: • Wide load inductance range: 0.2 to 40 mH • Peak Current: 18 A , Continuous Current: 6 A (Max), 10 to 200 W • Flexibility! Internal 40-pin socket configures amp with no soldering • Electronic gear rate from 1/255 to 255 • Separate and adjustable current Limits: Continuous, Peak and Peak- • Self-test function with trapezoidal velocity profile time • Support PUL/DIR and CW/CCW control signals • No integrator windup when disabled • Opto-isolated, support single-ended and differen- • Differential Input: ±10 V Analog tial inputs • Current Monitor Output • Over-voltage, over-current, encoder failure protec- • 3 LED Indicators for Faster Setup:Normal/Enable, Power-OK, tions Fault(Short-circuits or over temperature) • 10 latest failures self-record function • Over/Under-voltage, over-current, short-circuits, over temperature • 18 to 60 VDC Supply Voltage protection • 7 to 16 mA Logic Signal Current • 0 to 200 kHz Pulse Input Frequency Price Each 1 5+ Price Each 1 5+ SMC-243 DCS-920 Analog brushed Dc servo driver $215.00 less 10% SMC-400 ACS-606 Brushless Servo motor driver $245.00 less 10% DCS810 Brushed DC Servo Motor Driver ACS806 Brushless Servo Motor Drive The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it’s easy for the end Fully digital brushless AC servo driver developed with a users to change stepping drivers to the DCS810 without changing control 32 bit DSP and advanced control algorithms. Input com- systems, because its input command is PUL/DIR signal, which is compat- mands are pulse and direction signals, allowing users to ible with that of stepping drivers. upgrade stepper motor systems without changing controllers. The ACS806 can drive both AC and DC brushless In low power motion control applications, performances of DC servo sys- motors but is most suitable for AC brushless motors. tems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital Features: AC servo systems. However, the cost of the DCS810 stays at the price line • Input: 18 to 80 VDC of a stepping driver, namely far lower than those of AC servo drivers. • Peak Current: 18 A , Continuous Current: 6 A (Max) 50 to 400 W • PC based and handheld configuration tools Features: • Electronic gear rate from 1/255 to 255 • 18 to 80 VDC, 0-20 A, 20-400 W • Self-test function with trapezoidal velocity profile • Based on DSP control technology and high smooth • Support PUL/DIR and CW/CCW control signals servo control algorithm • Following error lock range adjustable • Feedback resolution ×4 encoder line count • Opto-isolated, support single-ended and differential inputs • Position error can be eliminated to 1 count, and • Over-voltage, over-current, encoder failure protections Velocity error can be eliminated to the Desired • 10 latest failures self-record function Velocity ±0.3% • 18 to 80 VDC Supply Voltage • Electronic gear ratio from 1/255 to 255 • 7 to 16 mA Logic Signal Current • Built-in motion controller for self-test with trapezoidal velocity profile • 0 to 600 kHz Pulse Input Frequency • Opto-isolated inputs, support single-ended and differential signals • Over-current, over-voltage, under-voltage, phase error, encoder error, Price Each 1 5+ position following error protections SMC-410 ACS-806 brushless servo motor driver $290.00 less 10%

Price Each 1 5+

SMC-242 DCS-810 Servo motor driver $215.00 less 10%

Page 60 Ocean Controls Catalogue 2012 OCEAN MOTORSCONTROLS

DMC5400 Advanced 4-axis Stepping & Servo 60 V Power Supply Motion Control Card This supply is capable of delivering current to motor drivers without af- The DMC5400 is an advanced 4-axis motion control card. Advanced DSP fecting the reliability due to its unregulated specialty and bulky capaci- on board allow for linear and circular interpolation with controlled accel- tance. By selecting correct model, one supply can drag 1-3 shafts motors eration curves. Supports up to 5 cards in one system (20 axes) and so the average cost per shaft is saved. Designed specifically for stepping/servo motor use Features: • 32-bit PCI bus, Rev. 2.2, 33 MHz Features • Pulse output rate up to 5 MHz • Rated Power: 450 W • 6 Pulse/dir output modes: Pulse and DIR or CW • Rated Current: 7.5 A and CCW • Input Voltage Range: 176 to 265 VAC • 2 to 4 axes linear interpolation • Short circuit, over-current & over-voltage protection • 2 axes circular interpolation • Internal EMI Filter • Trapezoidal and S-curve velocity profiles • Output Short circuit, over-current & over-voltage protection • 32 General-Purposed I/O • Multi-axis continuous interpolation • Position/speed change on-the-fly Price Each 1 5+ • 13 home return modes and auto home search • 4 axes incremental encoders input with 28-bit up/down counter SMC-106 60 V Power supply $149.00 less 10% • No Need for Additional Power Supply Motors Price Each 1 SMC-200 DMC-5400 Multi-axis controller $1049.00 Mini Servo 4.8 to 6 V SMC-201 TB-60 cable and terminal board $145.00 Mini sized servo perfect for R/C or robotics applications where size is at a SMC-202 TB-50 cable and terminal board $145.00 premium. Specifications: Stepper Motor Power Supply • Dimensions: 35 × 16.9 × 32mm (L x W x H) • Torque 4.8V: 3.4kg / cm SPS series power supplies are switchable DC power supplies specifically • Transit Time 4.8V: 0.19 sec / 60 ° designed for stepping & servo drivers. With stepping or servo systems • Torque 6V: 4.2kg / cm inductive loads are being switched so the driving current vary quickly. • Transit Time 6V: 0.15 sec / 60 ° This supply is capable of delivering current to motor drivers without af- fecting the reliability due to its unregulated specialty and bulky capaci- Price Each 1 5+ tance. By selecting the correct model, one supply can supply 1 to 3 mo- MOT-301 Mini servo 4.8 to 6 V $27.23 less 10% tors and so the average cost per shaft is saved.

Features: Standard Size Power Servo 4.8 to 6 V • Compact size, lightweight 112×102 × 55mm • Output power 300W (continuous work) Standard sized servo suitable for 1/10th scale R/C cars and robotics ap- • Short circuit, over-current & over-voltage plications. Strong torque for power applications. • Input Supply 240 VAC • SPS-407 output 7 A continuous at 40 V (9 A Peak Specifications: current). • Dimensions: 39.5 × 20 × 39.6mm (L x W x H) • SPS-487 output 7 A continuous at 48 V (9 A Peak current). • Torque 4.8V: 7.2kg / cm • SPS-705 output 5 A continuous at 70 V (7 A Peak current). • Transit Time 4.8V: 0.33 sec / 60 ° • Torque 6V: 8kg / cm • Transit Time 6V: 0.27 sec / 60 ° Price Each 1 5+

SMC-100 40 V power supply $125.00 less 10% Price Each 1 5+ SMC-105 48 V power supply $125.00 less 10% MOT-302 Standard size servo 4.8 to 6 V $36.32 less 10% SMC-110 70 V power supply $149.00 less 10% Heavy Duty Servo 4.8 to 6 V SPS369 36 V Power Supply A heavy duty servo which won’t make a heavy duty dent in your wallet. Features include ball bearing, high torque and quick transit time. Our SMC series of power supplies are switched mode DC power supplies specifically designed for stepping & servo applications. Standard switched Specifications: mode power supplies are designed for constant load and have tight volt- • Dimensions: 54.4 × 26.5 × 51.5 mm (L x W x H) age regulation. • Torque 4.8 V:10 kg·cm • Transit Time 4.8 V: 0.25 sec/60 ° These power supplies are designed to supply surge currents demanded • Torque 6 V: 13 kg·cm by motors without tripping out into error. These 36 V supplies match our • Transit Time 6 V: 0.20 sec/60 ° MOT-400 brushless DC servo motors. Features: Price Each 1 5+ • Designed specifically for stepping/servo use • Internal EMI Filter MOT-303 Heavy Duty servo 4.8 to 6 V $40.91 less 10% • Output power 360 W (continuous) • Output power 400 W (peak) • 100% load burn-in tested Jumbo Servo 4.8 to 6 V • Short circuit, over-current & over-voltage This is our largest servo and feature huge torque and speed. Features protection include ball bearings, high torque and quick transit time. • Input switchable: 110 ± 15% VAC or 220 ± 15% VAC Specifications • Dimensions: 65.0 × 32.0 × 70.4mm (L x W x H) • Torque 4.8 V: 35 kg·cm Price Each 1 5+ • Transit Time 4.8 V: 0.15 sec/60° SMC-102 SPS369 36 V Power Supply $125.00 less 10% • Torque 6 V: 42 kg·cm • Transit Time 6 V: 0.12 sec/60°

Price Each 1 5+

MOT-312 Jumbo Servo 4.8 to 6 V $115.00 less 10%

Ocean Controls Catalogue 2012 Page 61 OCEAN MOTORSCONTROLS

Power HD 9150 MG High Torque Digital RC Servo High Power DC Motor 12 V The HD-9150 MG is a great high-quality, standard-size servo that features A compact ferrite magnet type DC Motor featuring digital electronics for improved performance and all metal gears with two hard steel drive shaft, long life design and are built in ball bearings for the delivery of a tremendous amount of torque an ISO 9002 quality environment. Specifications • Size: 40.7 × 20 × 42.4 mm MOT-210 MOT-211 MOT-212 • Speed @ 6 V: 0.18 sec/60° Operating Voltage 6 to 12 V 6 to 18 V 6 to 12 V • Stall torque @ 6 V: 16 kg·cm Range • Speed @ 4.8 V: 0.20 sec/60° • Stall torque @ 4.8 V: 13 kg·cm Speed-No Load 11800 RPM 9700 RPM 18800 RPM • Lead length: 11.5 inches Current-No Load 0.8 A 1.3 A 2.6 A • Hardware included Torque @ Stall 2.7 kg.cm 6.0 kg.cm 4.9 kg.cm

Current @ Stall 26 A 57 A 92 A Price Each 1 5+ Efficiency 76% 73% 71% MOT-307 Power HD 9150 MG high torque digital $62.50 less 10% RC servo Power (@ Max 43 W 52 W 107 W Efficiency) Power HD 1501 MG High Torque RC Servo Speed(@ Max 9800 RPM 8490 RPM 15520 RPM Efficiency) The 1501MG is a metal-geared analog servo from Power HD that delivers extra-high torque normally associated with much more expensive or larg- Torque (@ Max 0.42 kg.cm 0.6 kg.cm 0.67 kg.cm er servos. This servo is a replacement for-and upgrade over-the original Efficiency) HD-2550A servo. Servo horns and associated hardware are included. Current (@ Max 4.7 A 6.0 A 12.8 A Efficiency) Specifications: • Size: 40.7 × 20.5 × 39.5 mm • Speed @ 6 V: 0.14 sec/60° • Stall torque @ 6 V: 17 kg·cm Price Each 1 • Speed @ 4.8 V: 0.16 sec/60° MOT-210 11800 RPM high power Dc motor 12 V $16.32 • Stall torque @ 4.8 V: 15.5 kg·cm • Lead length: 11 inches MOT-211 9700 RPM high power DC motor 12 V $22.68 • Hardware included MOT-212 18800 RPM high power DC motor 12 V $20.86

Price Each 1 5+ 50:1 12 VDC GearBox motor with 64 CPR Encoder MOT-308 Power HD 1510 MG high torque RC servo $29.95 less 10% This 37 mm diameter, 54 mm long gearmotor is a small 12 V motor with a 50:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corre- Gearbox DC Motor 12 V sponds to 3200 counts per revolution of the gearbox’s output shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder. Key specs at 12 V: 200 RPM and 300 mA free-run, 12 kg-cm (170 oz-in) and 5 A stall MOT-201 MOT-202 MOT-203 Specifications • Free-run current @ 12 V: 300 mA • Free-run speed @ 6 V: 100 rpm • Free-run current @ 6 V: 250 mA Torque 2.1 kg.cm 12.0 kg.cm 50 kg.cm • Stall current @ 6 V: 2500 mA Rated Voltage 12.0 V 12.0 V 12.0 V • Stall torque @ 6 V: 6 kg·cm • Lead length: 280 mm Operating Voltage 4.5 V to 18 V 4.5 V to 18 V N/A

Current - No load 30 mA 70 mA 270 mA Price Each 1

Current - Full load 390 mA 1,380 mA 11.7 A MOT-204 50:1 12 VDC gear motor with 64 CPR encoder $47.95

Gear Ratio 82:1 244:1 1000:1 Linear Actuator with Feedback 10" travel Shaft Speed 70 RPM 36 RPM 140 RPM The LD Series of linear actuators by Iowa Export-Import are 12 VDC gear- Transit Time 6V N/A 0.15 sec/60° N/A motors that use a worm drive to move a shaft back and forth along its length. The actuator has a dynamic load rating of 110 lbs (50 kg) and a Price Each 1 maximum speed of 0.5 in/s (1.3 cm/s). It is rated to withstand up to 550 lbs when not moving, and the worm drive ensures that the shaft will hold MOT-201 70 RPM reversible Gearbox DC motor 12 V $13.59 its position even when unpowered. MOT-202 36 RPM reversible gearbox DC motor 12 V $22.68 Two limits switches safely stop the motor at either MOT-203 140 RPM reversible gearbox DC motor 12 V $40.91 end of its range, while diodes allow it to reverse direction after reaching a limit point. The actuators are mostly metal, and the entire case is sealed to protect against dust and water (rated IP63). RC Servo is controlled by 3 wires: GND, Power and Control Price Each 1 POL-2311 Linear actuator with feedback 10" travel $135.00 They are usually powered by the receiver, which is usually powered by battery packs.

Page 62 Ocean Controls Catalogue 2012 OCEANSTEPPER CONTROLS MOTORS

Bracket for Linear Actuator FL20STH30-0604A 18 mN·m This machined aluminum bracket allows the LD linear actuators to be FL35STH36-0504A 98 mN·m mounted to a structure. Complete mounting hardware is included. Two FL39ST38-0806A/B 196 mN·m brackets are required for mounting each actuator. Industrial grade micro size stepper motor, ideal for robotics and small actuators. 18 mN·m (2.5 oz-in) holding torque. ø4 mm round shaft at one end

Industrial grade small size stepper motor, ideal for robotics and small actuators. 98 mN·m (14 oz-in) holding torque. ø5 mm round shaft at one end. Price Each 1

POL-2314 Bracket for linear actuator $14.95 Industrial grade small size stepper motors, ideal for robotics, actuators and small CNC machines. 196 mN·m (28 oz-in) holding torque. ø5 mm round shaft at one or both Stepper Motors ends. MOT-115: Extends 20 mm from 1 end of the motor; MOT-116: Extends 20 mm from front and 10 mm from rear Threaded Shaft Stepper Motor of the motor. These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific Price Each 1 5+ rate of 1 cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important. MOT-108 FL20STH30-0604A 18 mN·m bipolar step- $26.50 less 10% per motor Features: • Step Distance: 0.01 mm MOT-110 FL35STH36-0504A 98 mN·m Bipolar Step- $32.00 less 10% • 2-Phase, 4-Wire Bipolar per Motor • Rated Voltage: 12 V MOT-115 FL39ST38-0806A 196 mN·m Bipolar Step- $27.00 less 10% • Rated Current: 0.4 A/Phase per Motors • 100mm Long Threaded Shaft (keyed on one end) MOT-116 FL39ST38-0806B 196 mN·m Bipolar Step- $27.00 less 10% • Holding Torque: 0.21 N.cm per Motors Frame 17 Bipolar Stepper Motor Specifications Table Price Each 1 P/N ending with the letter A denotes for single shaft and ending with the letter B denotes for double shaft. SFM-001 Threaded Shaft Stepper Motor $29.50 To drive this motor we recommend the DM422, DM432 or our KTA-261. Bipolar Stepper Motor Specifications Table Specs P/N FL42STH38-1684B FL42STH47-1684B P/N ending with the letter A denotes for single shaft B denotes for double shaft. OC's SKU MOT-120 MOT-121

Step Angle 1.8° Specs P/N FL20STH30- FL35STH36- FL39ST38- 0604A 0504A 0806A/B Voltage 2.8 V 500 VAC

OC's SKU MOT-108 MOT-110 MOT-115/116 Current 1.68 A

Step Angle 1.8 ° Resistance per coil 1.65 Ω Voltage 3.9 V 10 V 6 V Inductance per coil 3.2 mH

Current 0.6 A 0.5 A 0.8 A Holding Torque 3.6 kg.cm 4.4 kg.cm

Resistance per 6.5 Ω 7.5 Ω Dimension 42 × 42 square face, 40 42 × 42 square face, 48 coil long, 31 between mount- long, 31 between mounting ing holes holes Inductance per 1.7 mH 18 mH 6 mH coil No. of Wires 4 leads

Holding Torque 180 g·cm 1.0 Kg.cm 2.0 Kg.cm

Dimension 20 × 20 mm 35 × 35 mm 39 × 39 mm FL42STH38-1684B Square face, 30 Square face, 36 Square face, 38 FL42STH47-1684B mm long, 16 mm mm long, 26 mm mm long, 31 mm between mount- between mount- between mount- Industrial grade small stepper motor, ideal for small CNC projects and ing holes ing holes ing holes robots. Has a holding torque of 3.6 Kg.cm (0.35 Nm or 50 oz-in). 5 mm diameter round shaft at both ends. No. of Wires 4 leads 4 leads 6 leads Industrial grade small stepper motor, ideal for small CNC projects and robots. Has a holding torque of 4.4 Kg.cm (43.1 N.cm or 61 oz.in). 5 mm diameter round shaft at both ends. This motor suits 3D printers like the RepRap Bipolar Motors in series results in high induct- and Makerbot cupcake machines. ance, lower current per winding. Price Each 1 5+

MOT-120 FL42STH38-1684B 353 mN·m Frame 17 $42.00 less 10% Bipolar Motors in parallel results in high in- Bipolar Stepper ductance but has better performance as the MOT-121 FL42STH47-1684B 43.1 N·cm Frame 17 $52.00 less 10% winding inductance is reduced. Bipolar Stepper

Ocean Controls Catalogue 2012 Page 63 OCEANSTEPPER CONTROLS MOTORS

Frame 23 Bipolar Stepper Motor Specifications Table Frame 34 Bipolar Stepper Motor Specifications Table P/N ending with the letter A denotes for single shaft and ending with the let- P/N ending with the letter A denotes for single shaft and ending with the letter B denotes for double shaft. ter B denotes for double shaft.

Specs P/N FL57STH56- FL57STH56- FL57STH76- Specs P/N FL86STH80- FL86STH118- FL86STH118- 2804B 1006B 2804B 5504A/B 6004B 6004B

OC's SKU MOT-122 MOT-124 MOT-125 OC's SKU MOT-130/131 MOT-132 MOT-135

Step Angle 1.8° Step Angle 1.8° Voltage 2.5 V 7.4 V 3.2 V Voltage 2.5 V 3.6 V 3.2 V

Current 2.8 A 1 A 2.8 A Current 5.5 A 6 A 6.2 A

Resistance per 0.9 Ω 7.4 Ω 1.13 Ω Resistance per coil 0.46 Ω 0.6 Ω 0.75 Ω coil Inductance per coil 4 mH 6.5 mH 9 mH Inductance per 2.5 mH 10 mH 3.6 mH coil Holding Torque 46 Kg.cm 87 Kg.cm 122 Kg.cm

Holding Torque 12.6 Kg.cm 9 Kg.cm 18.9 Kg.cm Dimension 86 × 86 mm 86 × 86 mm 86 × 86 mm Square face, 80 Sqaure face, Square face, 156 Dimension 56 × 56mm 56 × 56mm 56 × 56mm mm long, 69 118 mm long, mm long, 69 mm Square face, square face, square face, mm between 69.5 mm be- between mounting 56mm long, 56mm long, 76mm long mounting holes tween mounting holes 47mm between 47mm between holes mounting holes mounting holes No. of Wires 4 Leads 4 Leads 4 Leads No. of Wires 4 Leads 6 Leads 4 LEads

FL86STH80-5504A/B 4.51 N·m FL57STH56-2804B 1.24N.m FL86STH118-6004B 8.53 N·m FL57STH56-1006B 883mN.m FL86STH156-6204B 11.96 N·m FL57STH76-2804B 1.85N.m Industrial grade stepper motor, ideal for driving heavier Industrial grade small Stepper Motor, ideal for CNC projects loads. Front and rear shafts. Front shaft is 12.7 mm in and robots. Has a holding torque of 12.6Kg.cm (1.24Nm or diameter with a flat. Rear shaft is 12.0 mm in diameter 175oz-in). Shaft at both ends round. Industrial grade stepper motor, ideal for driving heavier loads. Shaft is 12.7 mm in diameter with a flat. Industrial grade small Stepper Motor, ideal for CNC projects and robots. Has a holding torque of 9.0Kg.cm (0.88Nm or Industrial grade stepper motor, ideal for driving heavier 125oz-in). Shaft at both ends loads. Front and rear shafts. Front shaft is 12.7 mm in diameter with a keyway. Rear shaft is 12.7 mm in diameter round. Industrial grade Stepper Motor, ideal for CNC projects and Industrial grade stepper motor, ideal for driving heavier robots. Has a holding torque of 18.9Kg.cm (1.85Nm or loads. Front and rear shafts. Front shaft is 15.875 mm 262oz-in). Shaft at both ends in diameter with a keyway. Rear shaft is round.

Price Each 1 5+

MOT-130 FL86STH80-5504A 4.51 N·m Frame 34 $125.00 less 10% Price Each 1 5+ Bipolar Stepper

MOT-122 FL57STH56-2804B 1.24 N·m Frame 23 $59.00 less 10% MOT-131 FL86STH80-5504B 4.51 N·m Frame 34 $125.00 less 10% Bipolar Stepper Bipolar Stepper

MOT-124 FL57STH56-1006B 883 mN·m Frame 23 $59.00 less 10% MOT-132 FL86STH118-6004B 8.53 N·m Frame 34 $189.00 less 10% Bipolar Stepper Bipolar Stepper

MOT-125 FL57STH76-2804B 1.85 N·m Frame 23 $59.00 less 10% MOT-135 FL86STH156-6204B 11.96 N·m Frame 34 $229.00 less 10% Bipolar Stepper Bipolar Stepper

FL60STH86-2008B 3.04 N·m Frame 24 Universal Stepper Bipolar Gearbox Stepper Motor Our most popular stepper motor! Industrial grade frame 24 stepper motor, The FL86STH80 is the same motor as our MOT-130, where as the ideal for medium to large CNC machines. Can be wired FL86STH118-6004B-NG10 is the same as our MOT-132 and the as unipolar, bipolar, series or parallel. 3.04 N·m (430 FL86STH156 is the same as our MOT-135. Bipolar oz-in) holding torque. ø6.35 mm (¼") shaft with flat Stepper Motor but with a 10:1 Planetary Gearbox at both ends. It has a step angle of 1.8° and 8 leads/ on the Front. Features : The MOT-150 has a holding torque of 46 Kg.cm • Voltage: 4.2 V (4.51 Nm or 638 oz-in), where as the MOT-152 • Current: 2.8 A has a holding torque of 87 Kg.cm (8.53 Nm or • Resistance per coil: 1.5 Ω 1207 oz-in) and the MOT-155 has an approimate holding torque of 122 • Inductance per coil: 6.8 mH kg.cm (12 Nm or 1694 oz-in) • Holding Torque: 31 Kg.cm • Dimensions: 60mm x 60mm square face, 88mm long, 47mm between mounting holes • Shaft extends 20mm and 15mm from ends of the motor Price Each 1 5+

MOT-150 Bipolar Gearbox Stepper Motor $395.00 less 10% Price Each 1 5+ FL86STH80-55048-NG10

MOT-128 FL60STH86-2008B 3.04 N·m frame 24 $69.00 less 10% MOT-152 Bipolar Gearbox Stepper Motor $459.00 less 10% universal stepper FL86STH118-6004B-NG10 MOT-155 Bipolar Gearbox Stepper Motor $499.00 less 10% FL86STH156-6204B-NG10

Page 64 Ocean Controls Catalogue 2012 OCEANMOTOR CONTROLSACCESSORIES

70 to 150 W Brushed DC Servo Motors Motor Accessories DCM5xxxx series motors are permanent magnet DC brush servo motors. The motors are ideal for cost sensitive applications. They include an at- IBEST DR Series (flexibleCoupling) tached encoder which provides position feedback to The DR series has a holding torque of ≤ 1 Nm, whereas the BR series has controllers. a holding torque of ≤3.5 Nm Suitable for a wide range of equipment and instruments such as engraving machines, cutting ma- Internal Internal External Length chines, jet-ink machines, experimental installations, ø1(mm) ø2(mm) ø(mm) images, analytic instruments, electronic packaging equipment, loading and unloading devices, medical instruments,etc. It performs better in equipment which expected to low noise, high precision and high velocity.

Features: DR4X6-D18L25 4 6 18 25 • High performance (Smooth operation, High precision and Low noise) • Positional error can be eliminated to one pulse DR6.35X6.35- 6.35 6.35 18 25 D18L25

Price Each 1 5+ DR8X8-D18L25 8 8 18 25 MOT-260 DCM50202A 70 W brushed DC servo, $169.00 less 10% IBEST BR Series (Flexible Coupling) 1000 Line Enc.

MOT-270 DCM50205 130 W brushed DC servo 500 $225.00 less 10% Internal ø1 Internal ø2 External Length line enc. (mm) (mm) ø(mm)

MOT-280 DCM50207 150 W brushed DC servo 1000 $239.00 less 10% line Enc. BR6.35X6.35- 6.35 6.35 24 25 MOT-281 DCM50207 150 W brushed DC servo $199.00 less 10% D24L25 without encoder BR8X8- 8 8 24 25 D24L25 BLM57180-1000 180 W Brushless DC Servo Motor with BR10X10- 10 10 30 30 1000 Line Encoder D30L30

These industrial servo motors are rated to 3000 RPM. The motor includes BR6.35X9.5- 6.35 9.5 30 30 a 1000 line encoder with differential encoder signals. The motors can D30L30 meet requirements of many applications requiring speed from as low as 1 rpm to as high as 4000 rpm BR6.35X12.7- 6.35 12.7 30 30 D30L30 Features: • Rated Voltage: 36 VDC BR9.5X12.7- 9.5 12.7 30 30 • Rated Power: 180 W D30L30 • Rated Torque: 0.57 N.m BR9.5X9.5- 9.5 9.5 30 30 • Peak Torque: 1.71 N.m D30L30 • Rated Speed: 3000 RPM • Rated Current: 6.7 A BR12.7X12.7- 12.7 12.7 30 30 • Peak Current: 20 A D30L30 • Torque Constant: 0.085 N.m/A • Back EMF Constant: 8.9 V/RPM Price Each 1 5+ • Resistance: 0.9 Ωs • Inductance: 2 mH IBE-004 Flexible Coupling DR4X6-D18L25 $11.11 less 10% • Inertia: 230 × 10 ^-4 kg • Motor Length (L): 115 mm IBE-005 Flexible coupling DR6.35X6.35-D18L25 $11.11 less 10% • Shaft Diameter: 8 mm with flat IBE-006 Flexible coupling DR8X8-D18L25 $11.11 less 10%

Price Each 1 5+ IBE-007 Flexible coupling BR6.35X6.35-D24L25 $12.67 less 10% IBE-008 Flexible coupling BR8X8-D24L25 $12.67 less 10% MOT-400 180 W brushless DC servo motor, 1000 $190.00 less 10% line encoder IBE-009 Flexible coupling BR10X10-D30L30 $12.67 less 10%

IBE-010 Flexible coupling BR6.35X9.5-D30L30 $12.67 less 10% ACM604V60-1-2500 400 W Brushless AC Servo Motor with 2500 Line Encoder IBE-011 Flexible coupling BR6.35X12.7-D30L30 $12.67 less 10% IBE-012 Flexible coupling BR9.5X12.7-D30L30 $12.67 less 10% High speed AC brushless servo motor with 2500 line encoder and hall effect sensors. It has 4 pole pairs with a 60 mm square face and ø14 mm IBE-013 Flexible coupling BR9.5X9.5-D30L30 $12.67 less 10% shaft with keyway. IBE-014 Flexible coupling BR12.7X12.7-D30L30 $12.67 less 10% Features: • Rated Voltage: 60 VDC • Rated Torque: 1.27 N.m IBEST BR6X6.35-D30L30 6.00 to 6.35 Flexible Coupling • Rated Speed: 3000 RPM General purpose flexible coupling with clamp style shaft connection. Suit- • Rated Current: 8.4 A able for coupling slightly mis-aligned shafts and absorbing some shock at • Torque Constant: 0.161 N.m/A motion start or stop. • Resistance: 192 Ωs • Inductance: 0.59 mH Specifications: • Inertia: 0.3549 × 10-4 kg.m2 • Rated Torque: ≤3.5 N·m • Mounting Diameter: 70 mm • Maximum Torque: 7.0 N·m • Motor Length: 127.8 mm • Corner Setover: ≤1.0 ° • Internal Diameter 1: ø6 mm • Internal Diameter 2: ø6.35 mm (¼") Price Each 1 5+ • External Diameter: ø30.0 mm • Length: 30 mm MOT-455 400 W brushless AC servo Motor $295.00 less 10% • Rotational Speed: ≤6,500 RPM

Price Each 1 5+

IBE-015 IBEST BR6X6.36-D30L30 6.00 to 6.35 $12.67 less 10% Flexible coupling

Ocean Controls Catalogue 2012 Page 65 OCEANMOTOR CONTROLSACCESSORIES

Spider Coupler Universal Aluminium Mounting Hub for 3 / 4 / 5 / 6 mm Connects motors or shafts which are slightly misaligned and Shaft Pair absorbs torsional shock. The hubs are connected by a syn- These universal mounting hubs are designed to work with most 3 / 4 / 5 / thetic rubber spider. 20mm dia / 30mm long / 6.35mm (1/4”) 6 mm shafts, including bore • Round shafts (ALL) • “D” shafts (ALL) • Tamiya’s 3 mm hexagonal shafts (MOA-010 only). Price Each 1 5+ Each hub has the following: MOA-001 Spider coupler $18.14 less 10% • Four Mounting holes for 2 to 56 screws (MOA-010) • Four Mounting holes for 4 to 40 screws (MOA-011), (MOA-015) • Six Mounting holes for 4 to 40 screws (MOA-012) 6.35mm (1/4”) Shaft Coupler They let you mount custom wheels or mechanisms to your motors. 4 to Solid steel Shaft Coupler connects two axially aligned shafts by 40 hex set screws allow secure coupling of shaft to hub. hex drive set screws. It measures 12.7mm dia / 19mm long • One included for each hub; MOA-010, MOA-011 and MOA-015. /6.35mm (1/4”) bore. • A pair are included for each hub; MOA-012. The included set screws require a 0.05" hex wrench (often the smallest size in SAE Allen wrench sets). Price Each 1 5+

MOA-002 Shaft Coupler $11.77 less 10%

500/1000 Line Rotary Encoder

500/1000 line rotary encoder with A, B and Z NPN- MOA-010, MOA-011, MOA-015, MOA-012 style outputs. The 500 line has a 4 mm solid shaft with flat, where as the 1000 line has a 6 mm solid shaft with flat. Both have rear entry cable and require Price Each 1 5+ a power supply of 5 to 24 VDC. MOA-010 Universal mounting hub for 3 mm shaft $11.95 less 10% pair Price Each 1 5+ MOA-011 Universal mounting hub for 4 mm shaft $11.95 less 10% IBE-001 Rotary encoder ISC3004-701E500B-5- $135.00 less 10% pair 24C MOA-012 Universal mounting hub for 6 mm shaft $12.95 less 10% IBE-002 Rotary encoder ISC4006 -H03G1000BZ3- $135.00 less 10% pair 5-24C MOA-015 Universal mounting hub for 5 mm shaft $12.45 less 10% pair 500 Line Internal Hollow Diameter Rotary Encoder 500 line rotary encoder with A, B and Z NPN-style Aluminium Hub with Set Screws outputs. 6 mm/ 8mm diameter shaft with flex bracket flange. It requires 12 to 24 V DC power supply. Both Securely connect a gear or plate to a shaft using this Alu- have rear entry cable. minium Hub. 22.5 mm dia. Connects to gear using 4 set screws. 6.35 mm (1/4”) bore

Price Each 1 5+

IBE-100 Rotary encoder IHC3806-401G500BZ3- $147.00 less 10% Price Each 1 5+ 12-24C MOA-003 Aluminum hub $11.77 less 10% IBE-101 Rotary encoder IHC3808-401G500BZ3- $147.00 less 10% 12-24C Pololu 20D/37D mm Metal Gearmotor Bracket

ISM8060 Rotary Encoder The 20D brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the ø72 mm rotary encoder for precise machine control. Alu- bracket. These light-weight brackets (under 5 g each) fea- minium and steel construction with excellent feel. 100 ture three mounting holes and ten mounting slots for M3 or pulses per revolution with NPN quadrature output. #4-size screws, giving you a variety of mounting options. The 37D also sold in pairs, weighing under 15 g each and features seven mounting holes for M3 or #4-size screws Price Each 1 5+ along each edge.

IBE-003 Rotary encoder ISC8060-401G100BZ1- $135.00 less 10% 12C Price Each 1 5+ Our staff are generally able to offer valuable MOA-013 Pololu 20D mm metal gearmotor bracket $11.77 less 10% pair technical advice as to applications for our MOA-014 Pololu 37D mm metal gearmotor bracket $13.10 less 10% products. However without seeing the circuits, pair environment or machinery, we cannot be held responsible for any errors or misunderstand- Do you have a project that needs to be ings which may arise from such advice. We designed and built but you do not have invite customers to seek independent the time or expertise? Our engineers are professional assistance on complex circuits able to provide a free quote to do the work. or applications.

Page 66 Ocean Controls Catalogue 2012 OCEANCNC CONTROLS KITS

CNC Kits 262 oz-in Hi-Speed & Torque CNC Pack The CNC-006 3 Axis Package includes • 3 x High Speed Frame 23 MOT-125 Motors 50 oz-in Frame 17 Mini 3 axis CNC Pack • 3 x ND556 Low Noise Sinusoidal Drivers The CNC-001 3 Axis Package includes • 2 x SPS407 40 VDC Stepper Supplies • 3 x High Speed MOT-120 Stepper Motors • 1 x Parallel Port Interface KTA-205 • 3 x DM422C Stepper Motor Drivers (1,2,4 • 1 x Wiring Diagram and 8 Microstepping) $1102 Value for $800 • 1 x 150 W 24 VDC Power Supply • The CNC-106 Additional Axis Package • 1 x Parallel Port Interface KTA-205 • 1 x High Speed Frame 23 MOT-125 Stepper Motor • 1 x Wiring Diagram • 1 x ND556 Low Noise Sinusoidal Driver The CNC-101 Additional axis package includes: $278 Value for $175 • 1 x High-speed MOT-120 Stepper motors • 1 x DM422C Stepper motor driver (1,2,4 and 8 microstepping) Price Each 1 • 1 x PSM-002 24 VDC 40 W power supply CNC-006 262 oz-in High speed CNC Pack $799.00

CNC-106 262 oz-in high speed additiona axis pack $175.00 Price Each 1 CNC-001 50-oz-in frame 17 mini CNC pack $419.00 310 oz-in High Speed & Torque CNC Pack CNC-101 50-oz-in Frame 17 additional axis $139.00 The CNC-007 3 Axis Package includes • 3 x Hi-Speed Frame 23 MOT-105 Stepper Motors • 3 x ND556 Low Noise Sinusoidal Drivers 125 oz-in High Speed CNC Pack • 3 x SPS407 40 VDC Stepper Supply The CNC-002 3 Axis Package includes • 1 x Parallel Port Interface KTA-205 • 3 x High Speed MOT-124 Stepper Motors (see • 1 x Wiring Diagram Specs) $1211 Value for $900 • 1 x 3 Axis Driver KTA-263 • • 1 x 150 W 24 VDC Power Supply The CNC-107 Additional Axis Package • 1 x Parallel Port Interface KTA-205 • 1 x High Speed Frame 23 MOT-105 Stepper Motor $593 Value for $419 • 1 x ND556 Low Noise Sinusoidal Driver • 1 x SPS407 40 VDC Stepper Supply The CNC-102 Additional Axis Package includes $387 Value for $289 • 1 x High Speed MOT-124 Stepper Motors (see Specs) • 1 x Axis Driver KTA-261 Price Each 1 • 1 x PSM-002 24 VDC 40 W Power Supply $210 Value for $149 CNC-007 310 oz-in high speed CNC pack $899.00 CNC-107 310 oz-in high speed additional axis pack $289.00 Price Each 1

CNC-002 125 oz-in high speed CNC pack $419.00 430 oz-in 3-axis CNC Pack with Standard Drivers

CNC-102 125 oz-in high speed additional axis pack $149.00 The CNC-010 3 Axis Package includes: • 3x MOT-128 Frame 24, 430 oz-in Stepper Motors • 3x SMC-003 M542 Microstepping 175 oz-in High Speed 3 Axis CNC Pack • 2x SMC-100 40 V 280 W switchmode power supply • 1x PSM-512 15 W, 12 V switchmode power supply The CNC-004 3 Axis Package includes • 1x KTA-205 Parallel port breakout card • 3 x Hi-Speed Frame 23 MOT-122 Stepper • 1x CAB-001 Parallel port cable Motors • 1x Wiring diagram • 3 x M542 Microstepping Drivers (up to 25000 $864 Value for $735 steps per rev) • 2 x SPS407 40 VDC Stepper Supply The CNC-110 Additional Axis Package includes • 1 x Parallel Port Interface KTA-205 • 1 x Frame 24 MOT-128 Stepper Motor • 1 x Wiring Diagram • 1 x M542 Microstepping Driver $937 Value for $675 $178 Value for $151 The CNC-104 Additional Axis Package includes • 1 x High Speed Frame 23 MOT-122 Stepper Motor Price Each 1 • 1 x M542 Microstepping Driver (up to 25000 steps per rev) $228 Value for $135 CNC-010 430 oz-in-3-axis CNC pack with standard drivers $735.00

Price Each 1 CNC-110 430 oz-in additional axis pack $151.00

CNC-004 175 oz-in high speed CNC pack $675.00 430 oz-in 3-axis CNC Pack with Pure Sinusoidal Drivers CNC-104 175 oz-in high speed additional axis pack $135.00 The CNC-011 3 Axis Package includes 262 oz-in High Speed & Torque CNC Pack • 3 x MOT-128 Frame 24, 430 oz-in Stepper Motors • 3x SMC-004 ND556 Pure Sinusoidal The CNC-005 3 Axis Package includes • 3xMicrostepping drivers • 3 x Hi-Speed Frame 23 MOT-125 Motors • 2 x SMC-100 40 V 280 W switchmode power supply • 3 x M542 Microstepping Drivers (to 25000 • 1 x KTA-205 Parallel port breakout card steps/rev) • 1x PSM-512 15 W, 12 V switchmode power supply • 2 x SPS407 40 VDC Stepper Supplies • 1x CAB-001 Parallel port cable • 1 x Parallel Port Interface KTA-205 • 1 x Wiring Diagram • 1 x Wiring Diagram $1162 Value for $862 • $1012 Value for $675 The CNC-111 Additional Axis Package includes The CNC-105 Additional Axis Package includes • 1× MOT-128 Frame 24, 430 oz-in stepper motor • 1 x High Speed Frame 23 MOT-125 Stepper Motor • 1× SMC-004 ND556 Microstepping, pure sinusoidal driver • 1 x M542 Microstepping Driver (up to 25000 steps per rev) $248 Value for $135 $228 Value for $194

Price Each 1 Price Each 1

CNC-005 262 oz-in high speed CNC pack $675.00 CNC-011 430 oz-in-3-axis CNC pack with pure sinusoidal drivers $862.00

CNC-105 262 oz-in high speed additional axis pack $135.00 CNC-111 430 oz-in Additional axis pack $194.00

Ocean Controls Catalogue 2012 Page 67 OCEANCNC CONTROLS KITS

630 oz-in 3-axis CNC Pack with Sinusoidal Drivers 4 Axis CNC Controller

The CNC-020 3 Axis Package includes The CNC-703 CNC controller is a 4 axis stand • 3x MOT-130 Frame 34, 630 oz-in Stepper Motors alone CNC controller for mills and routers, with • 3x SMC-011 AM882 Pure Sinusoidal Microstepping step and direction outputs for stepper motor drivers drivers. • 3x SMC-105 48 V 300 W switchmode power supplies It includes an internal flash memory and USB port • 1x PSM-512 15 W, 12 V switchmode power supply for connecting USB flash drive for storage and • 1x KTA-205 Parallel port breakout card execution of G-Code files. It consists of a hand • 1x CAB-001 Parallel port cable controller with 16 buttons and LCD Screen, Break- $1479 Value for $1258 out Board and Cable for connecting the two. • The CNC-120 Additional Axis Package includes The controller requires at least one limit switch on each axis and an • 1 x MOT-130 Stepper Motor optional cutter adjusting device can be connected. Four digital outputs • 1 x AM882 Low Noise Sinusoidal Driver are provided for interfacing to spindles and controlling up to 15 spindle • 1 x SPS407 40 VDC Stepper Supply speeds. $463 Value for $345 The controller requires 24 VDC for power, refer to the wiring diagram for how to connect power, inputs and outputs. Note that the controller Price Each 1 requires a driver for each motor. CNC-020 630 oz-in 3 axis CNC pac with sinusoidal drivers $1258.00 Price Each 1 5+ CNC-120 630 oz-in Additional axis pack $365.00 CNC-703 4 axis CNC controller $995.00 less 105 1207 oz-in 3-axis CNC Pack with Sinusoidal Drivers 70W Brushed DC Servo Motor 3 Axis CNC Kit The CNC-022 3 Axis Package includes The CNC-013 Axis Package includes: • 3x MOT-132 Frame 34, 1207 oz-in Stepper Motors • 3x MOT-260 70 W DC brushed servo motors with 1000 line encoders • 3x SMC-011 AM882 Pure Sinusoidal Microstepping drivers • 3x SMC-245 DCS303 microsize brushed DC servo drivers • 3x SMC-105 48 V 300 W switchmode power supplies • 3x PSM-008 150 W, 24 V switchmode power supplies • 1x PSM-512 15 W, 12 V switchmode power supply • 1x KTB-205 Parallel port breakout card • 1x KTA-205 Parallel port breakout card • 1x Programming cable for DCS303 drivers • 1x CAB-001 Parallel port cable • 1x Wiring diagram • 1x Wiring diagram $1672 Value for $1421 $1095 Value for $930 • The CNC-122 Additional Axis Package includes The CNC-114 Additional Axis Package includes • 1 x MOT-132 Stepper Motor • 1x MOT-260 70 W DC brushed servo motor with • 1 x AM882 Microstepping Drivers 1000 line encoder • 1× SMC-105 SPS487 48 VDC Switchmode power supply for motor • 1x SMC-245 DCS303 brushed DC servo driver drivers • 1x PSM-008 150 W 24 V Switchmode power $533 Value for $453 supply $350 Value for $298

Price Each 1

CNC-013 70 W brushed DC servo motor 3 axis CNC kit $930.00

CNC-113 Servo additional axis pack $298.00

130W Brushed DC Servo Motor 3 Axis CNC Kit

The CNC-014 3 Axis Package includes • 3x MOT-270 130 W DC brushed servo motors with 1000 line encoders • 3x SMC-242 DCS810 brushed DC servo drivers • 3x PSM-008 150 W, 24 V switchmode power supplies Price Each 1 • 1x KTB-205 Parallel port breakout card • 1x CAB-001 Parallel port cable CNC-022 1207 oz-in 3 axis CNC pack with sinusoidal drivers $1421.00 • 1x Programming cable for DCS810 drivers $1541 Value for $1310 CNC-122 1207 oz-in Additional axis pack $453.00 • The CNC-114 Additional Axis Package includes 1700 oz-in 3-axis CNC Pack with Sinusoidal • 1x MOT-270 130 W DC brushed servo motor with 1000 line encoder Drivers • 1x SMC-242 DCS810 brushed DC servo driver • 1x PSM-008 150 W 24 V Switchmode power supply $496 Value for $420 The CNC-024 3 Axis Package includes • 3x MOT-135 Frame 34, 1700 oz-in Stepper Mo- tors • 3x SMC-011 AM882 Pure Sinusoidal Microstep- ping drivers • 3x SMC-105 48 V 300 W switchmode power supplies • 1x PSM-512 15 W, 12 V switchmode power supply • 1x KTA-205 Parallel port breakout card • 1x CAB-001 Parallel port cable $1792 Value for $1523 • The CNC-124 Additional Axis Package includes Price Each 1 • 1 x MOT-135 Stepper Motor CNC-014 Servo CNC pack $1310.00 • 1 x AM882 Microstepping Drivers • 1 x SPS487 48 VDC Stepper Supply CNC-114 Servo additional axis pack $420.00 $573 Value for $489

Price Each 1

CNC-024 1700 oz-in 3 axis CNC pack with sinusoidal drivers $1523.00

CNC-124 1700 oz-in Additional axis pack $489.00

Page 68 Ocean Controls Catalogue 2012 OCEANSOFTWARE CONTROLS

150 W Brushed DC Servo Motor 3 Axis CNC Kit ModbusView Software

The CNC-015 3 Axis Package includes ModbusView is an easy to use program that monitors and simulates • 3x MOT-280 150 W DC brushed servo motors with 1000 line encoders Modbus communications on your PC. It enables your PC to act as both a • 3x SMC-242 DCS810 brushed DC servo drivers modbus master and a slave device making it easy for you to simulate the • 1x PSM-201 500 W, 27 V switchmode power supply action of your HMI machine, instruments, PLCs etc. ModbusView can oper- • 1x PSM-512 15 W, 12 V switchmode power supply ate on a PC under Windows 95/98, ME, NT, 2000, XP and Vista and Win7. • 1x KTB-205 Parallel port breakout card It can communicate both in the RTU form and the ASCII form and it can • 1x CAB-001 Parallel port cable also be set to a range of baud rates, data bits, parity and stop bits. • 1x Programming cable for DCS810 drivers $1681 Value for $1430 The user can monitor and set the status of coils, input status, holding reg- • isters and input registers. The values of the input and holding reg-isters The CNC-115 Additional Axis Package includes can be viewed in decimal, hexadecimal, long integer, long hexadecimals • 1x MOT-280 150 W DC brushed servo motor with 1000 line encoder and floating point (forward and reverse) • 1x SMC-242 DCS810 brushed DC servo driver $454 Value for $385

Price Each 1

CNC-015 Servo CNC pack $1430.00

CNC-115 Servo additional axis pack $385.00

Single Axis 400 W Brushless AC Servo Kit

Kit Contents: • 1 × MOT-455 400 W Brushless AC servo motor with 1000 line encoder • 1 × SMC-410 ACS806 Brushless servo motor drive • 1 × SMC-106 60 V, 8 A Switchmode power supply

Price Each 1

Price Each 1 OCS-001 ModbusView software $49.00

CNC-145 Single axis 400 W brushless AC servo kit $624.00 ModbusView TCP Software ModbusView TCP/IP is an easy to use program that monitors and simu- Software lates Modbus ASCII, RTU and TCP/IP communications on your PC. It enables your PC to act as both a Modbus master and a slave device making it easy for you to simulate the action of your HMI machine, instruments, SuperView - Process Supervision Software PLCs etc. ModbusView TCP can be downloaded from the website and will SuperView is a Supervisory Control and Data Acquisition software operate in a 15 minute trial mode. Once purchased, you will be emailed (SCADA) that brings to the user a visual develop- with a serial number to enable unlimited use. ment model to create process monitoring and Compatible with Windows 95 through Win7. The user can monitor and control applications. Besides communicating with set the status of coils, input status, holding registers and input registers. Modbus RTU and Modbus TCP devices, it is also pos- The values of the input and holding reg-isters can be viewed in decimal, sible to use SuperView stations operating in Client hexadecimal, long integer, long hexadecimals and floating point (forward or Server modes thus allowing distributed supervi- and reverse) sion of a process or system Features • Visual development without the use of “scripts” • Access Policies customized for each user • Cryptographic Historic with data tampering detection • Export function to the formats XLS, PDF, RTF, XML, HTML, DBF, TXT, CSV • Cryptographic event log for user and application • Visual objects available to create supervision forms • Alarms supervision with visual, sound and e-mail notifications • Report generator, Mathematical formulas • Task scheduler triggered by conditional or date/time • Allows logged data download from Novus FieldLogger • Easy configuration of Modbus communication parameters for NOVUS products • Modbus RTU and Modbus TCP protocols • Operations mode Client and Server: within a corporative network, it is possible to distribute the supervision among multiple computers connected to a TCP/IP network. A SuperView station can be executed as Client, Server or both modes • Remote activation for historic, tasks and formulas with a SuperView Client

Price Each 1 5+

NOP-301 Superview-Process supervision software $599.00 less 10% USB key Price Each 1

OCS-011 ModbusView TCP software $69.00

Ocean Controls Catalogue 2012 Page 69 OCEAN RELAYSCONTROLS

ISEE-ModbusTCP Software Relays Our popular ISEE-Modbus software has had a major update. ISEE-Mo- busTCP data acquisition program is a fully featured minimum cost HMI program for controlling and monitoring controllers, PLCs and instrumenta- SDK4 12 and 24 VDC SPST Relay Terminals tion that use the Modbus and Modbus TCP protocol. Runs under Windows Features: 7/Vista/XP (requires Microsoft .Net Frameworks to be installed on your • 12 VDC and 24 VDC versions PC) • Input current: About 13 mA • LED status indicator Features: • Maximum switching voltage output: 250 VAC,30 • Interrogate multiple controllers, PLCs and instruments VDC • Supports Modbus TCP and Modbus RTU and ASCII protocol • Maximum switching current: 3 A • View the holding and input registers. They can be viewed as raw • Maximum switching power of the load resistor readings or in engineering units. • Contact Material: Silver alloy • Holding and Input registers can contain integers, long integers and floating point numbers • Contact Type: A regular open SPST • View the status of the coils and input status • Life (resistive load) Mechanical life: 2 × 10 7 switching action • Write to the coils and holding registers • Electrical life: 1 × 10 switching actions • Supports up to 1024 tags • Test voltage winding / contact: 2 kV, 50 Hz, 1 minute • No graphics to draw. Simply display the readings on the screens. • Contact / Contact: 1 kV, 50 Hz, 1 minutes Readings can be grouped as you like. • Display registers, coils, statuses and calculated variables on graphs Price Each 1 5+ or trends • View the maximum and minimum values for each tag RLY-100 SDK4 12 VDC Relay terminals $14.50 less 10% • Log registers, coils, statuses and calculated variables to a csv type file • Display and analyse Historical logged files on graphs • Display and control alarms 5 A DPDT Plug-in Relays For DIN Rail Mounting • The program configuration can be saved to disk All analog, digital inputs and outputs and calculated variables are defined by tags with 12 VDC, 24 VDC, 24 VAC and 240 VAC Versions real names and real engineering units making it easy for you to understand what is going on. Specifications: • Contact Capacity...... 5 A 250 VAC/ 28 VDC • Coil Resistance (12 VDC)...... 160 Ω • Coil Resistance (24 VDC)...... 640 Ω • Coil Resistance (24 VAC)...... 168 Ω • Coil Resistance (240 VAC)...... 16500 Ω • Operate Time...... 25 ms Life expectancy -- mechanical 20,000,000 operations at no load -- electrical 200,000 at rated resistive load Features • a built in indicator to show state of relay • a test button to force relay contacts • plugs into DIN Rail Base Part No. HER-010 Price Each 1

OCS-015 ISEE Modbus TCP Software $149.00 Price Each 1 5+ HER-001 5 A, 12 VDC plug-in DPDT relay $6.95 less 10%

ViewPID Software HER-002 5 A, 24 VDC plug-in DPDT relay $6.95 less 10%

ViewPID is our new easy to use Windows PC program that monitors and HER-003 5 A, 24 VAC plug-in DPDT relay $6.95 less 10% records the performance of your PID controller (such as our Novus 1100, 1200, 2000 and 3000 controllers) The PC is simply connected to the HER-004 5 A, 240 VAC plug-in DPDT relay $6.95 less 10% PID controller with a RS-232 or RS-485 connection. The software then communicates with the Process controller using Modbus Protocol. By 5 A, 4 PDT DIN Mount Relays connecting your PC to your PID controller using a RS-232 or RS-485 serial connection, ViewPID software interrogates your controller for the follow- Four pole, double throw (4PDT) relay with 5 A contacts ing values using Modbus protocol. and 24 VAC/VDC or 240 VAC coil. A built in flag indicator shows at a glance whether the relay is active or not. A ViewPID can be used with the following PID Controllers manual push button allows momentary activation of the - NOVUS N1100 relay. Suits HER-011 DIN rail mount base. - NOVUS N1200 - NOVUS N2000 Specifications: - NOVUS N3000 • Contact Capacity...... 5 A 250 VAC/ 28VDC ViewPID can be configured to work with other controllers by manually • Coil Resistance (@24 VDC)...... 640 Ω specifying the Modbus addresses of the process variables. These can be • Coil Resistance (@24 VAC)...... 168 Ω saved to a configuration file. If you wish us to add support for your con- • Coil Resistance:(@240VAC)...... 640 Ω troller, please contact us and we will likely be able to add your controller • Operate Time...... 25 ms in the next software update. Life expectancy -- mechanical 20,000,000 operations at no load -- electrical 200,000 at rated resistive load Features • a built in indicator to show state of relay • a test button to force relay contacts • plugs into DIN Rail Base Part No. HER-011 DIN Rail Mount Base for 4 DPDT Relays.

Price Each 1 5+

HER-005 12 VDC 4PDT DIN rail mount relay $8.95 less 10%

HER-006 24 VDC 4PDT DIN mount relay $8.95 less 10%

HER-007 24 VAC 4PDT DIN mount relay $8.95 less 10% Price Each 1 HER-008 240 VAC 4PDT DIN rail mount relay $8.95 less 10% OCS-007 ViewPID software $59.00

Page 70 Ocean Controls Catalogue 2012 OCEAN RELAYSCONTROLS

Relay Base DIN Rail Mount / DPDT/ 4PDT/SPDT 30 A Heavy Duty DPDT Chassis Mount Relay 240 VAC Coil DPDT/4PDT/SPDT Model. Connections Are via screw terminals. Specifications • HER-010 suits HER- • Contact Rating: 30 A 001/002/003/004. • Coil resistance : For 50 Hz : 4500 Ω • HER-011 suits HER- • Coil current: 16.7 mA 005/006/007/008. • Nominal Voltage:240 V • RLY-019 suits RLY-020 and • Pickup voltage: 192 V RLY-021. It has a current rating of 10A • Drop out voltage: 48 V • Power consumption (W): 4

Price Each 1 5+

Price Each 1 5+ RLY-007 30 A Heavy duty DPDT Chassis mount $15.40 less 10% relay 240 VAC HER-010 DIN mount relay base to suit DPDT relays $3.65 less 10%

HER-011 DIN rail mount base to suit 4PDT relays $3.65 less 10% 30 A Heavy Duty SPDT Chassis Mount Relay 12 VDC Coil RLY-019 Relay Base DIN rail mount SPDT 10 A $4.09 less 10% Specifications: • Max voltage: 250 VAC 10 A DPDT Plug-in Relays with DIN Rail Mounting • Max current: 30 A • Max VA (Watts):7200 VA (1100 W) 10 A DPDT relay with tag connections and various range including; 12 • Contact material: Silver Nickel Alloys VDC, 24 VDC/VAC and 240 VAC. Suits optional DIN-rail base. • Coil resistance: 160 Ωs • Max coil power: 2.5 W Specifications: • Insulation resistance:>1000 M @500 VDC • Contact Form: 2Z (DPDT, 2 × changeover) • Electrical life: 100,000 operations • Contact Capacity: 10 A 240 VAC / 28 VDC pure resistive load • Mechanical life: 1 million operations • Coil Power: 0.9 W • Dimensions: 50W × 27L × 20H mm (excluding terminals) • Contact Resistance: ≤50 mΩ • Insulation Resistance: ≥ 100 MΩ Price Each 1 5+ • Mechanical Operations: 100 Million • Electrical Operations: 500,000 RLY-018 30 A heavy duty SPDT Chassis mount $8.36 less 10% relay 12 VDC coil

20 A Heavy Duty SPST Chassis Mount Relay 12 VDC Coil Price Each 1 5+ Used in motors, transformers, heaters, etc. HER-020 10 A DPDT Relay with 12 VDC coil $6.95 less 10% Specifications: HER-021 10 A DPDT Relay with 24 VDC coil $6.95 less 10% • 12V, 160 Ω coil. • 20A @ 220 VAC / 30 VDC HER-022 10 A DPDT Relay with 24 VAC coil $6.95 less 10%

HER-023 10 A DPDT Relay with 240 VAC coil $6.95 less 10% HER-025 DIN mount relay base to suit DPDT relays $3.65 less 10% Price Each 1 5+ RLY-008 20 A heavy duty SPST chassis mount $7.23 less 10% 10 A DPDT DIN Rail Relays with LED relay 12 VDC coil 12 VDC or 24 VDC or 240 VAC coil relay with two changeover contacts (DPDT) rated at 10 A 240 VAC. 30 A Heavy Duty SPST Chassis Mount Relay Features: Used in heavy duty applications like air conditioning, • LED Indicator heating and so on. • Coil at 12 VDC 160 Ω Coil at 24 VDC 650 • DIN Rail Mount base with screw Terminals. • Can be mounted by screws or on a DIN Rail Specifications: • 12 V, 120 Ω coil • Loads up to 7,500 W Price Each 1 5+ • High inrush capability, 65 A, 10,000 V

RLY-003 12 VDC relay and DIN base $10.95 less 10% Price Each 1 5+

RLY-004 24 VDC relay and DIN base $10.95 less 10% RLY-009 30 A heavy duty SPST Chassis mount $9.05 less 10% RLY-010 240 VAC relay and DIN base $10.95 less 10% relay 12 VDC coil

30 A Panel Mount Relay ESR2 3 A, 240 VAC Solid State Relay Specification: This PCB mounting, single in line package relay capable of switching up to • Contact Form: DPDT or 2Z 240V AC at 3 amps. • Contact Capacity 30 A/ 250 VAC Input Circuit: • Coil Voltage 12 VDC, 24 VDC or 240 VAC • Control Voltage Range: 3 to 32 VDC • Coil Power: 2.5 W/ 4 VA Dimension: 36 × 36 × 48 mm • Control Current: 15 mA Max • Min. turn off voltage: 1 VDC Price Each 1 5+ • Input Resistance: 2.2 kΩ min.

HER-030 30 A, 12 VDC Panel Mount Relay $7.95 less 10% Output Circuit: • Max load current: 3 A HER-031 30 A, 24 VDC Panel Mount Relay $7.95 less 10% • Nominal Line Voltage: 240 VAC HER-032 30 A, 240 VAC Panel Mount Relay $7.95 less 10% • Load Voltage Range: 24 to 280 VAC • Min Blocking Voltage: 600 VAC • Min. Load current: 50 mA

Price Each 1 5+

SSR-011 ESR2 PCB SSR, 3 to 32 VDC in, 3 A, 240 $16.32 less 10% VAC switch

Ocean Controls Catalogue 2012 Page 71 OCEAN RELAYSCONTROLS

PCB Mount Solid State Relays Multiple Relay Cards DC Switching, Zero Cross and Random Turn on AC Versions. Low profile These would have to be the most versatile relay cards on the market. The PCB mounting solid state relays with LED input status cards come in a 12 V or 24 V powered form. Each relay can be operated indication. by TTL levels, NPN and PNP open collector or 0 to 12 V (0 to 24 V if using 24 VDC relays). Each relay has two inputs, marked LO and HI. As the (RLY-022) PCB Mount Solid State Relay 12 V names suggest a low on the LO input will operate the relay. Similarly a -- Control voltage range: 9.6 to 14.4 VDC high on the HI input will also operate the relay. They also feature LEDs to -- Max. input current: 20 mA indicate the state of the relay. -- Load voltage: 3 to 125 VDC -- Load current: 0.01 to 2 A Specifications: • • Operating Voltage 12 VDC (or 24 VDC) (RLY-023) PCB Mount Solid State Relay 12 V Zero Crossing Turn On • Input low voltage (LO) 0 to 0.8 V -- Type: Zero crossing turn on, solid state relay. The relay will only • Input high voltage (HI) 2.4 to 12 V (or 24 VDC) turn on when the line (output) voltage is near zero. Suitable for • They are available in 2, 4, 6 and 8 Relay Cards resistive loads • Each single pole changeover relay contacts SPDT will switch -- Control voltage range: 9.6 to 14.4 VDC 10 A/24 VDC, 10 A/110 VAC, 5 A/240 VAC. -- Load voltage: 75 to 400 VAC • Coil Resistance for the relays is 400 Ω (12V) -- Load current: 0.1 to 3 A • Current consumption for 2 relay card (12V) RLY-024 PCB Mount Solid State Relay - Random Turn On -- All relays off 4 mA -- Type: Random turn on, solid state relay. When the control voltage -- One relay on 37 mA is given the relay output will turn on regardless of what the line -- Two relays on 70 mA voltage is. Suitable for inductive loads -- Control voltage range: 9.6 to 14.4 VDC -- Load voltage: 75 to 400 VAC -- Load current: 0.1 to 3 A

Price Each 1 5+ Price Each 1 5+ RLY-022 PCB mount solid state relay 12 V $11.75 less 10% RLC-122 Two 12 V relay card $21.50 less 10% RLY-023 PCB mount solid state relay 12 V Zero $13.55 less 10% cross turn on RLC-124 Four 12 V relay card $42.50 less 10%

RLY-024 PCB mount solid state relay-random turn $13.55 less 10% RLC-128 Eight 12 V relay card $85.00 less 10% on RLC-242 Two 24 V relay card $21.50 less 10%

12 and 24 VDC PCB Relays RLC-244 Four 24 V relay card $42.50 less 10% RLC-248 Eight 24 V relay card $85.00 less 10% These SPDT relays are type JQC-3F (T73) RLD-122 Two 12 V Relay Card on DIN rail $33.25 less 10% Specifications: • Contact Capacity 10 A, 250 VACresistive load RLD-124 Four 12 V Relay Card on DIN rail $59.00 less 10% • Contact Resistance <= 50mΩ • Coil Resistance 400 Ω 12 VDC, 1600 Ω 24 VDC RLD-128 Eight 12 V Relay card on DIN rail $109.95 less 10% • Can switch 5 A at 240 VAC, 10 A at 120 VAC and 10 A RLD-242 Two 24 V relay card on DIN rail $33.25 less 10% at 24 VDC resistive loads RLD-244 Four 24 V relay card on DIN rail $59.00 less 10%

Price Each 1 5+ RLD-248 Eight 24 V relay card on DIN rail $109.95 less 10%

HER-050 12 VDC PCB relay $1.95 less 10% Telecoms Relay Cards HER-051 24 VDC PCB relay $1.95 less 10% Each relay can be operated by TTL levels, NPN and PNP open collector or 0 to 12V. Each relay has two inputs, marked LO and HI. As the names sug- 12 and 24 VDC SPDT PCB Mount Relays gest a low on the LO input will operate the relay. Similarly a high on the HI input will also operate the relay. We have operated these relays from Fully sealed construction (immersion cleanable). an old style TTL 7404 Hex Inverter which have less drive capacity than

the newer HC and HCT types. The inverter could operate the relay with Specifications both a low and a high output signal. But what is more important was that • Max voltage: 250 VAC, 110 VDC; Max current: 16 A the High voltage dropped from 4 V to 3.5 V showing the output still had • Max VA (Watts): 1800 VA (450 W) capacity to drive other TTL devices • Coil resistance: 200 Ωs; Max coil power: 720 mW • Insulation resistance: >100 M@ 500 VDC Specifications: • Electrical life: 100,000 operations • Operating Voltage 12 VDC • Mechanical life: 10 million operations • Input low voltage (LO) 0 to 0.8 V • Input high voltage (HI) 2.4 to 12 V Price Each 1 5+ • Relays featuring silver alloy contacts SPDT- 12V DC. - Coil 285 Ωs. - 10A @ 30 VDC or 10A @ 240 VAC contact rating. RLY-020 Relay SPDT 16 A 12 VDC PCB mount $4.55 less 10% • A LED shows the state of each relay. • Four 3.5 mm holes in each corner allow easy mounting on a panel RLY-021 Relay SPDT 16 A 24 VDC PCB mount $4.55 less 10%

Relays Evaluation factors for various applications: • Number & Type of contacts: Normally Open (NO), Price Each 1 5+ Normally Closed (NC) RMC-122 Two 12 V Telecoms relay cards $26.40 less 10%

• Contact Sequence: "Make-before-Break" or "Break- RMC-124 Four 12 V Telecoms Relay Cards $52.30 less 10% before-Make" • Current & Voltage Rating of Contacts RMC-128 Eight 12 V Telecoms relay cards $104.60 less 10% • Coil Voltage & Current RMD-122 Two 12 V Telecoms relay cards on DIN rail $44.90 less 10% • Operating lifetime: often shows mechanical and RMD-124 Four 12 V Telecoms Relay Cards on DIN $84.80 less 10% contact lifetime. Contact lifetime is dependent on rail the load it is switching. RMD-128 Eight 12 V Telecoms relay cards on DIN $169.60 less 10% rail

Page 72 Ocean Controls Catalogue 2012 OCEAN RELAYSCONTROLS

Plug-In Relay Cards 4 Channel Opto-Isolator Card These would have to be the most versatile relay cards on the market. The Ocean Controls KTA-258 or KTD-258 is a 4 channel Each relay can be operated by TTL levels, NPN and PNP open collector or opto-isolator with the ability to take signals from NPN, 0 to 12 V(0 to 24 V if using 24 VDC relays). Each relay has two inputs, PNP, dry-contact and push-pull type sensors and present marked LO and HI. As the names suggest a low on the LO input will oper- isolated NPN or PNP-style outputs. Each channel has ate the relay. Similarly a high on the HI input will also operate the relay. switches for selectable input and output configurations. Specifications: The card can be used to convert PNP sensors for use • Operating Voltage 12 VDC (or 24 VDC) with NPN-style inputs on a PLC or vice-versa. A 1,000 V • Input low voltage (LO) 0 to 0.8 V isolation barrier between input and output sides prevents • Input high voltage (HI) 2.4 to 12 V (or 24 VDC) ground loops and electrical noise from coupling into your • Fully sealed construction (immersion cleanable). control system. • A LED shows the state of each relay. • Four 3.5 mm holes in each corner allow easy mounting on a panel Features: • Indicator LEDs on each channel Relays Specifications • 72 × 42.4 mm (KTA-258) • Max voltage: 250 VAC, 110 VDC • DIN rail mount version available (KTD-258) • Max current: 16 A • Max VA (Watts): 1800 VA (450 W) Price Each 1 5+ • Contact material: Silver Selenium Dioxide • Coil resistance: 200 Ω KTA-258 4 Channel Opto-Isolator card $69.00 less 10% • Electrical life: 100,000 operations • Mechanical life: 10 million opera- KTD-258 4 Channel Opto-Isolator card on DIN rail $79.00 less 10% tions mount

Solid State Relay Terminal Card Price Each 1 5+ The KTx-273 is a single Solid State Relay (SSR-001) mounted on terminal RPC-122 Two 12 V plug-in relay cards $22.90 less 10% card for quick and easy use in any application. DIN rail version is KTD-273

RPC-124 Four 12 V Plug-in relay cards $45.30 less 10% Features: • Load Current: 2 A. Load Voltage 24~400 VAC RPC-128 Egith 12 V plug-in relay cards $90.60 less 10% • 3 to 24 VDC input control. • Control current: 6 mA to 25 mA. RPD-122 Two 12 V plug-in relay cards on DIN rail $41.40 less 10% • Zero crossing, over load protected. RPD-124 Four 12 V plug-in relay cards on DIN rail $77.80 less 10% • Optic isolated between each terminals; In&out ≥ 2000 VAC 1 min. RPD-128 Eight 12 V plug in relay cards on DIN rail $155.60 less 10%

RPC-242 Two 24 V plug-in relay cards $22.90 less 10%

RPC-244 Four 24 V Plug-in relay cards $45.30 less 10%

RPC-248 Egith 24 V plug-in relay cards $90.60 less 10% Price Each 1 5+ RPD-242 Two 24 V plug-in relay cards on DIN rail $41.40 less 10% KTA-273 Solid State Relay Terminal Card $15.00 less 10% RPD-244 Four 24 V plug-in relay cards on DIN rail $77.80 less 10% KTD-273 Solid State Relay Terminal Card with DIN $19.00 less 10% RPD-248 Eight 24 V plug in relay cards on DIN rail $155.60 less 10% rail mount

DC Solid State Relay Cards SAI4002D 2 A, 400 VAC Solid State Relay These would have to be the most versatile relay cards on the market. Features: Each relay can be operated by TTL levels, NPN and PNP open collector or 0 • PCB Mounting SSR to 12V. Each relay has two inputs, marked LO and HI. As the names sug- • 400 VAC, 2 A switching gest a low on the LO input will operate the relay. Similarly a high on the • 3to 24 VDC input control. HI input will also operate the relay. • Control current: 6 mA to 25 mA. Specifications: • Zero crossing, over load protected. • Operating Voltage 12 VDC • Compact size, easy to install. • Input low voltage (LO) 0 to 0.8 V • Optic isolated between input and output terminals; In&out ≥ 2000 VAC 1 min. • Input high voltage (HI) 2.4 to 12 V • Low profile PCB mounting solid Price Each 1 5+ state relays with LED input status indication. Suitable for applications such as I/O interfaces and programmable logic controllers. SSR-001 SAI4002D SSR, 4 to 24 VDC In, 2 A, 400 $12.00 less 10% VAC switch Solid State Relay Specifications: • Control voltage range: 9.6 to 14.4 VDC • Max. input current: 20 mA 100 A DC Solid State Relay • Load voltage: 3 to 125 VDC • Load current: 0.01 to 2 A Solid State Relay 3 to 32 VDC Input, 100 A @30 VDC Switching. This solid • A LED shows the state of each relay. state relay uses MOSFET technology to provide an economical and reliable • The Relay Cards are available in 12 VDC method of switching medium to high power DC loads. • Four 3.5 mm holes in each corner allow easy mounting on a panel Output Circuit: • Max On-State Resistance: 0.007 Ω Price Each 1 5+ • Max On-State Voltage Drop: 0.35 V • Max Turn On/Off Time: 0.5 ms RNC-122 Two 12 VDC solid state relay cards $35.10 less 10% • Max Surge Current: 240 A (10 ms) RNC-124 Four 12 VDC solid state relay cards $69.70 less 10% Input Circuit: RNC-128 Egitht 12 VDC solid state relay cards $139.40 less 10% • Control Current: 28 mA max. • Min Turn Off Voltage: 1.0 VDC RND-122 Two 12 VDC solid state relay cards on $53.60 less 10% • Input Resistance: 1.2 kΩ DIN rail • Dimensions: 58.4 × 45.7 × 22.9 mm RND-124 Four 12 VDC solid state relay cards on $102.20 less 10% DIN rail Price Each 1 5+

RND-128 Eight 12 VDC solid state relay cards on $204.40 less 10% SSR-013 Solid state Relay 100 A @ 30 VDC switch- $43.95 less 10% DIN rail ing

Ocean Controls Catalogue 2012 Page 73 OCEAN RELAYSCONTROLS

SS-110DD 10 A, 60 VDC Solid State Relay 40 A, 240 VAC Solid State Relay (Potentiometer Input The SS-110DD Solid State Relay from Conch is a panel mounting solid Phase Control) state relay that offers 4 to 32 VDC input control, with the output rated The SS-240VA is a panel mounting solid state relay that allows a 500 kΩ at 10 A at 60 VDC. It provides 4,000 V opto-isolation between input and pot to be connected across the input. The position of the potentiometer output. results in Phase Trigger Control of the Load. If the potentiometer is set at Input Circuit : 10% then 10% of each half cycle is passed. • Current: 6 to 10 mA Warning there is no isolation between the input and output. There • Pick Up voltage: 4 VDC; Drop Out Voltage: 2 VDC is 240 VAC across the potentiometer inputs. The potentiometer Output Circuit must be rated to 240 VAC. • Load Voltage Range: 5 to 60 VDC • Non rep. peak voltage: 150 VP; Leakage current The breakdown voltage is rated at 2,500 V RMS. Comes with cover to <1 mA minimize contact with live voltages • Operating/Storage Temperature: -20 to 80°C/-40 to 100°C Input Circuit • Dimensions:57 × 45 × 30 mm • Potentiometer Resistor 500 kΩ for 240 VAC Output Circuit Price Each 1 5+ • Load Volt Range: 80 to 280 VAC; rated at 40 A SSR-120 SS-110DD SSR 4 to 32 VDC In, 10 A, 60 $35.00 less 10% • Non rep. peak voltage: 600 Vp; Leakage current 8 mA VDC switch • 1 Cycle Surge Current 400 A

40 A, 240 VAC 4 to 32 VDC/ 80 to 280 VAC Solid State Price Each 1 5+ Relay SSR-125 40 A, 240 VAC SSR Potentiometer in $35.00 less 10% The SS-240AA / SS-240DA Solid State Relay offers 80-280VAC / 4-32 phase control VDC input control, with the output rated at 40Amps @ 240VAC. It provides 4000Vms opto-isolation between input and output. Comes with 40A, 440VAC Solid State Relay cover to minimize contact with live voltages (see picture)

Input Circuit: -- Control Voltage: 4 to 32 VDC -- Pick Up Voltage: 4 VDC -- Drop Out Voltage: 2 VDC 80 to 280 VAC 4 to 32 VDC Output Circuit -- Nominal Line Voltage: 240 VAC -- Load Voltage Range: 24 to 280 VAC -- Min. Blocking Voltage: 600 VAC -- Max one- cycle surge current: 400 A INPUT CIRCUIT - Operating/Storage Temperature: -20 to 80°C/-40 to 100°C - Control Voltage Range 80 to 280 VAC 4 to 32 VDC -- Dimensions:57(L) × 45(W) × 30(H)mm Control Current 10 mA @110 VAC 6 to 10 mA

Price Each 1 5+ Pick up Voltage 60 VAC 4 VDC

SSR-100 SS-240DA SSR 4 to 32 VDC In, 40 A, 240 $35.00 less 10% Drop out Voltage 40 VAC 2 V VAC switch OUTPUT CIRCUIT

Nominal Line Voltage 415 VAC 440 VAC SS-210AA 80 to 280 VAC Input, 10 A @ 240 VAC Switch Load Voltage Range 48 to 480 VAC 48 to 440 VAC The SS-210AA Solid State Relay from Conch is a panel mounting solid state relay that offers 80 to 280 VAC Min Blocking Voltage 600 VAC 600 VAC input control, with the output rated at 10 A at 24 Max one-cycle surge 400 A 400 A to 280 VAC. It provides 4000 V RMS opto-isolation current between input and output.

Price Each 1 5+

SSR-205 40 A, 440 VAC Solid state relay, 80 to 280 $47.50 less 10% Price Each 1 5+ VAC Input SSR-200 40 A, 440 VAC SSR 4 to 32 VDC input $42.50 less 10% SSR-110 SS-240AA SSR 80 to 280 VAC In, 40 A, $35.00 less 10% control 240 VAC switch

SSR-115 SS-210AA 80 to 280 VAC in, 10 A @ 240 $35.00 less 10% VAC switch SSR Duty Cycle Controller KTA-269 converts 4 to 20 mA or 0 to 5/10 V signal to a PWM signal suit- 40 A, 240 VAC, 4 to 20mA In Solid State Relay able for SSR. The PWM frequency is configurable using the half pitch DIP switches on the board and the PWM duty cycle is controlled by an analog The SS-240CA is a DIN rail mounting solid state relay with 4 to 20 mA input. analog input. The output is driven with leading edge phase control in an S-curve suitable for lighting applications. The SSR provides 4,000 VRMS Features include: isolation between input and output. • Adjustable PWM frequency modes • 5 V output pulse Output Circuit • 0/4 to 20 mA or 0 to 5/10 V analog -- Load Voltage Range: 90 to 260 VAC input signal control -- Non rep. peak voltage: 600 VP • DIN rail mount option (SKU: KTD-269) -- Leakage current 8 mA -- 1 Cycle Surge Current 400 A -- Dimensions:57(L) × 45(W) × 30(H) mm Price Each 1 5+ -- DIN Rail Mount Heat Sink included KTA-269 SSR duty cycle controller $59.95 less 10% Price Each 1 5+ KTD-269 SSR duty cycle controller DIN rail mount $70.00 less 10% SSR-130 SS-240 CA SSR 4 to 20 mA In, 240 VAC $75.00 less 10% switch

Page 74 Ocean Controls Catalogue 2012 OCEANPANEL METERS CONTROLS & DISPLAYS

Solid State Relay Heatsink N1500 Universal Process Indicator These heatsinks are designed for mounting the 40 A 240 VAC and SSR- The N1500 would have to be the best featured budget priced program- 013 solid state relays on them. They are manufactured from solid black mable process indicator on the market. Hundreds aluminium and come in widths of 50 mm (fits 1 relay) and 100 mm (fits 2 have been sold. The standard version comes with Solid State Relays). The screw holes for the solid state relays are 4 mm. key panel programmable range, selectable deci- The heatsinks are suitable to be used with an 80 mm fan mounted at the mal point, universal switching power supply, 24 heatsink end. Vdc output for field transmitters excitation, ultra bright five digit LED display and 2 relay alarms Also available is the DIN rail mountable heatsinks(pictured in white), with 6 function options. which is manufactured from solid aluminium with dimension of 100x50x40 mm. They are suitable for moutning the 40A 250VAC , 440VAC and SSR- Features are 013 solid state relays. • Accepts: type J, K, T, E, N, R, S and B thermocouples; Pt100, 4 to 20 mA, 0 to 50 mV and 0 to 10 Vdc • Accepts and linearizes non-linear 4 to 20 mA signals from thermocouple transmitters. • Accepts front panel input of custom created non-linear curve with up to 20 segments. • Selectable decimal point for Pt100 , 4 to 20 mA and 0 to 50 mV • Key panel protection through password to avoid tampering. • Alarms: Two 3 A SPST relay alarms in the basic version and two extra relays optional. • Alarm functions: HI, LO, differential HI, diff. LO and sensor break detection. • Hold capability and peak and valley detection. • Tare function via front panel or via digital input. • Five digit 13 mm ultra bright LED display. • Standard 24 Vdc output for field transmitters. • Power required 24 VDC/AC or 85 to 264 VAC • Universal switching power supply.Circuitry can be removed from Price Each 1 5+ housing without disconecting wires -- Front panel: IP65, Polycarbonate UL94 V-2. SSR-020 Black aluminium DIN rail mount heatsink $15.00 less 10% -- Back panel: IP30, ABS+PC UL94 V, 0.5 Digit LED display 50 mm for SSR Because it has 2 relay contacts you can program it to operate as an ON- SSR-021 Black aluminium DIN rail mount heatsink $22.00 less 10% OFF Controller and Display unit. Options include; 4 to 20 mA output for 100 mm for SSR retransmission of measured variable to a recorder or PLC, two extra alarm relays, 1 digital input, RS-485 digital communication interface and 10 Vdc SSR-030 Silver aluminium DIN rail mount heatsink $27.50 less 10% 40 mm for SSR output for load cell excitation. Large Digit 60 mm Display available as well

Panel Meters & Displays Price Each 1 5+ IPI-100 N1500 Universal process indicator 24 VDC $265.00 less 10%

IPI-101 N1500 Universal Process indicator 240 $235.00 less 10% N1500 Universal Load Cell Indicator VAC N1500 LC is a universal indicator for use with load cells. It accepts a IPI-105 N1500 Universal 24 VDC, Analog Out, $299.00 less 10% wide variety of electric signals and is suitable for Load Cells with 1 mV/V, RS-485, 4 relays 2 mV/V and 3 mV/V output. A six-digit LED display shows measured value IPI-102 N1500 240 VAC, Analog Out, RS-485, 4 $299.00 less 10% and all programming parameters of the instrument. Configuration can be relays entirely made through the keyboard, no circuit changes are required.

Features include: Large N1500G Universal Process Indicator • Input: 4 to 20 mA, 0 to 20 mA, 0 to 50 mV, 0 to 20 mV & –20 to 20 mV; Packed with features this large high performance • 10 VDC excitation for load cells; universal digital panel meter features a bright • Memory for maximum and minimum values; 56 mm high display for high visibility at long dis- • Hold, peak hold, tare, zero tare and automatic zero functions; tances. Setup can be done via its keyboard. • 2 SPST 3 A Alarm Relays (4 Alarm Relays is optional) • Alarm Relays can be configured for LO, HI, differential, diff. LO, diff. Features : HI and sensor break • Accepts: type J, K, T, E, N, R, S and B ther- • A Process Variable (PV) retransmission in 0 to 20 mA or 4 to 20 mA mocouples; Pt100, 4 to 20 mA, 0 to 50 mV comes as standard and 0 to 10 Vdc • Internal resolution: 128000 levels. • 10VDC excitation voltage available for Load • Display resolution: 62000 levels (-31000 to 31000); cells and strain guages • Sampling rate: 15 samples per second; • Accepts and linearizes non-linear 4 to 20 mA signals from thermocouple transmitters. • Maximum error: 0.15 of the maximum range • Accepts front panel input of custom created non-linear curve with up • PV retransmission resolution: 4000 levels, max. 550W to 20 segments. • Selectable decimal point for Pt100, 4 to 20 mA and 0 to 50 mV • Key panel protection through password to avoid tampering. • Alarms: Two 3 A SPST relay alarms in the basic version and two extra relays optional. • Alarm functions: HI, LO, differential HI, diff. LO and sensor break detection. • Hold capability and peak and valley detection. • 4 to 20 mA analog retransmission • RS-485 Modbus RTU connection • Tare function via front panel or via digital input. • Five digit 56 mm ultra bright LED display. Price Each 1 5+ • Standard 24 Vdc output for field transmitters. IPI-110 N1500LC Load Cell indicator 24 VDC $399.00 less 10% • Power required: 85 to 264 VAC

IPI-111 N1500 LC Load cell indicator 240 VAC $399.00 less 10% Price Each 1 5+

IPI-103 N1500G 240 VAC Analog Out, RS-485, $575.00 less 10% Large 60 mm tall display

Ocean Controls Catalogue 2012 Page 75 OCEANPANEL METERS CONTROLS & DISPLAYS

N480i Process Indicator 5 Digit Process RS-485 Indicator (48 × 96 mm) This low cost and easy-to-use universal indicator can be This 5 digit indicator will allow you to easily display readings from a programmed by non-experienced users. Full rangeability Modbus RTU master via a RS-485 link. Using pushbuttons on the front and a 24 Vdc output for remote transmitters are standard. the user can easily setup up the baudrate, parity, modbus address of the indicator Features Include • Input: thermocouples J, K, T, N, R, S; Pt100, 50 mV, Features 10V and 4 to 20 mA • Readout Range -19999 to 99999 digit • Programmable range from -1999 to +9999 • Modbus RTU Protocol • 2 relay alarms • AC/DC 18~60 V powered • Alarm functions: LO, HI, differential, diff. HI, differential LO and • 19200/9600/4800/2400 selective baudrate broken sensor. • Modbus address selectable 01~255 • Power: 100 to 240 Vac/dc or 24 Vdc/ac • Dimension small (48 × 96 × 85 mm) • Option 1 relay alarm can be replaced with 24 Vdc output excitation for • Discrete screw terminals allow easy connec- transmitters (only on 240 VAC model) tion • Detects any sensor failure. • CE EMC certification • Options Available • 240 VAC powered Price Each 1 5+ Dual Reading (Displays two readings see AXI-021) IPI-120 N480i Process indicator 24 VDC Power 2 $159.00 less 10% relays

IPI-121 N480i Process indicator 240 VAC Power $159.00 less 10% Price Each 1 5+ 2 relays AXI-020 5 Digit Process RS-485 Indicator $159.00 less 10% IPI-122 N480i Process indicator 240 VAC 1 Relay $159.00 less 10% 24 VDC out AXI-021 Dual 5 Digit Process RS-458 Indicator $179.00 less 10%

5 Digit Micro Process Meters N320 Temperature Indicator This 5 digit process meter provides a simple, in-loop display of a process The N320 is a panel-mount temperature indicator offering 3 ½ highly vis- variable. Scaling and offset settings allow the user to configure the display ible LED digits. All indicators have configurable offset correction capabili- to show the value in suitable engineering units. Settings are stored in ties and adjustable hysteresis. non-volatile memory. The unit has an internal battery, allowing it to sam- Features (All): ple signals down to 0 mA. • 3½ digit LED display Specifications: • Sensor offset adjustment • Sampling Time : 2.5 cycles/sec • Adjustable hysteresis • Readout range : -19999 ~ 99999 digit adjustable • Configuration preserved through power failures • Decimal point adjustable • Configurable password for configuration lock • Accuracy: 0.05 % Full scale • IP65 when installed into a panel • Input Impedance: ~250 ΩAC/DC • Long life silicone keys • Dimensions: 75 × 33 × 75 mm • Panel Cutout: 70 × 29 mm

Three versions of the N320 are available. NTC, thermocouple and PT100 RTD input units. The NTC version comes with a waterproof sensor on a 2 m cable. The thermocouple version accepts J, K or T thermocouples.

Price Each 1 5+

NOI-001 N320 temperature Indicator (NTC Ther- $79.00 less 10% mistor)

Price Each 1 5+ NOI-003 N320 Temperature indicator (JKT Ther- $89.00 less 10% mocouple) AXI-001 4 to 20 mA Loop powered indicator red $99.00 less 10% on black NOI-005 N320 Temperature indicator (PT100 RTD) $79.00 less 10%

AXI-005 0 to 20 mA self powered indicator micro $99.00 less 10% process indicator with LCD 4 Digit Mini Programmable 0 to 20 mA Display This microprocessor controlled meter can be used to display a 4 to 20 mA 5 Digit Micro Process Meters or 0 to 20 mA signal in engineering units. The user can set the input value, display value, zero adjustment and the position of the decimal This 5 digit indicator will allow you to easily monitor a 0 to 110 VDC sig- point. All settings all done by switches under the front panel cover. All set- nal. Perfect for monitoring battery banks. Powered by an internal battery tings are saved to nonvolatile memory which can last a minimum of 7 years Features include: Specifications: • 4 Digit LED display range -1999 to 9999 • Accuracy 0.05% F.S.±1digit • Adjustable Sampling Time 0.1 to 9.9 secs. • Programmable rate -19999 to 99999 digit • Signal out of range indication • Self-power,no external supply required • Programmable scaling. Range 0.1 to 999.9 • Dimension small (24 × 48 × 50 mm) and High stability • Power required 12 VDC ±5% 0.5 W or 24 VDC ±5% 0.5 W • Discrote terminal,connector easy • CE EMC certification Price Each 1 5+ Price Each 1 5+ CPM-001 Mini-type 4 to 20 mA Panel meter 12 VDC $89.00 less 10% AXI-006 0 to 110 VDC, Input powered black on $99.00 less 10% powered silver CPM-002 Mini-type 4 to 20 mA Panel meter 24 VDC $99.00 less 10% AXI-010 4 to 20 mA, 5 to 30 VDC Powered red $109.00 less 10% powered on black

AXI-011 4 to 20 mA, 20 to 260 VAC powered red $109.00 less 10% on black

Page 76 Ocean Controls Catalogue 2012 OCEANPANEL METERS CONTROLS & DISPLAYS

Mini-Type 0 to 10 V Panel Meter 24 VDC Powered 4 Digit Current/Voltage Meter

Our Conch range of small microprocessor controlled 4 digit micro process meter with wide range of inputs including: 0 to meters have been really popular. They are simple to 600 VAC, 0 to 20 mA and 0 to 10 A. 99 to 182 VAC or 198 to 264 VAC use and can be used to display a 0 to 10 VDC signal in powered. Features configurable gain, offset and averaging settings and engineering units. One use for them is to display the hold, zero (tare), and maximum functions. Add the small split core current setpoint signal on variable speed drives. The user can transformer (ALT-051) to ALT-045 to produce a 0 to 20 mA AC signal with set the input value, display value, zero adjustment and a 0 to 60 A AC primary current. the position of the decimal point. All settings all done by switches under the front panel cover. All settings are saved to nonvola- Features (All Models): tile memory. Signal out of range indication. Power required 24 VDC ±5% • High stability, non-flammable case (PC), high safety 0.5 W • 0.8” high brightness LED • display range:-9999 ~ 9999,decimal point selectable Price Each 1 5+ • Measuring AC Voltage 0 to 300 VAC • Accuracy: 0.2% F.S.,±1 digit CPM-006 Mini-type 0 to 10 V panel meter 24 VDC $99.00 less 10% • Power: 110/220 VAC powered

4 Digit Mini Display Tachometer This meter can be used to display the RPM of a engine. It has a programmable scaling factor which you can divide the pulse source by to correct Price Each 1 5+ the reading to engineering units. A scaling figure of 6 corrects the reading to show RPM. ALT-040 4 Digit micro process meter 0 to 300 VAC $99.00 less 10% Features: ALT-041 4 Digit micro process meter 0 to 600 VAC $99.00 less 10% • 4 Digit LED display 0 to 9999 ALT-045 4 Digit micro process meter 0 to 20 mA $99.00 less 10% • Accepts NPN input signals up to approx 1 KHz AC • Adjustable Sampling Time 0.1 to 9.9 secs • Programmable decimal point position ALT-046 4 Digit micro process meter 0 to 10 A AC $99.00 less 10% • Programmable scaling. Range 0.1 to 999.9 • Power required 12 VDC ±5% 0.5 W or 24 VDC ±5% 0.5 W 0 to 20 mA Analog Panel Meter Price Each 1 5+ This analog panel meter measures DC current from 0 to 20 mA with 5% accuracy. It has a clear and easy to CPM-003 Mini-type Tachometer/Line speed meter $119.00 less 10% read scale and an adjustable dial. 12 V powered These can be useful for measuring the current on the CPM-004 Mini-type Tachometer/Line speed meter $119.0 less 10% GPIO pins on your microcontroller or numerous other 24 V powered applications. The face of the meter is 45 x 45 mm overall. The mounting hole should be 38 mm. The overall 4 to 20 mA Loop Powered 96 × 48 mm LCD indicator depth of the meter is 35 mm. The TI200 is a microprocessor-based programmable process indicator, designed especially to be powered from the input current loop. TI200 Price Each 1 is equipped with a fully programmable -1999 to 9999 LCD display with programmable point position and digital filter as well as with a 2-key SFI-001 0-20mA Analog Panel Meter $5.00 keyboard. The indicator comes in a plastic case for panel mounting in a standard 96 × 48 mm DIN front size. It also comes in an IP-65 rated box as shown in the grey box in the diagram on the right. 0 to 5 V Analog Panel Meter Features: This analog panel meter measures DC voltage from 0 to • 13 mm tall LCD digits 5 volts with 2.5% accuracy. It has a clear and easy to • Simple configuration with settings stored in read scale and an adjustable dial. These come in handy non-volatile memory for measuring the output of sensors with 5 V ranges. • Programmable scaling. Range 0.1 to 999.9 • Power required 12 VDC ±5% 0.5W or The face of the meter is 45 × 45 mm overall. The 24 VDC ±5% 0.5W mounting hole should be 38 mm. The overall depth of the meter is 35 mm. Price Each 1 5+

CMI-001 4 to 20 mA Loop Powered LCD Indicator $129.00 less 10% Price Each 1 CMI-005 4 to 20 mA Loop Powered LCD Indicator $149.95 less 10% SFI-002 0 to 5 V Analog Panel Meter $5.00 in IP-65 box Single Phase Multifunction Power Meter Large 3 Digits Process Indicator This quad-display power meter shows true RMS voltage and current, frequency and a selectable choice of true RMS real power in watts or The TC67U is designed for wide range of control applications. The large kilowatts, true RMS apparent power in volt-amps, or power factor. The 3 digit display uses 45 mm tall LED digits and is visible at long distances. high-brightness LED display shows four measurements at once, making It is equipped with a universal input which accepts Pt100 signals, Pt1000 this an ideal meter for single phase monitoring. Separate inputs allow the signals, PTC signals, 6 thermocouple types, 0 to 20 mA signals, 4 to 20 device to be powered from an independent source to the voltage under mA signals, 0 to 100 mV signals and 0 to 10 V signals. Pulse output for an test though both can be wired together in single-source installations. SSR. CE EMC certification. Programmable linearisation and decimal point precision for voltage and current inputs . Cold junction compensation for Specifications: thermocouples, line resistance compensation for RTDs • Built-in 0 to 50 A current transformer • 0.25% F.S.±1 digit Accuracy (Voltage/Current/ Features: Power) • Isolated 12 to 24 VAC/DC power supply allows • Suitable for measuring a single phase, 2 wire the indicator to be placed in-loop (1P2W) line • 5 A, 250 V rated changeover relay contact • Adjustable decimal point (display resolution) for current and power • Configurable peak filtering and low pass filtering • RS-485 interface for Modbus RTU network access and configuratio • Measurement error 0.3% from span • CE EMC certification • Panel Mount size: 144 × 72 × 92 mm, suits a 136 × 66 mm panel cutout Price Each 1 5+

Price Each 1 5+ AXI-040 Singphase Multifunction power meter $199.00 less 10% CMI-010 Large 3 Digits Provess Indicator $299.00 less 10%

Ocean Controls Catalogue 2012 Page 77 OCEANPANEL METERS CONTROLS & DISPLAYS

Power Meter with 2 Alarms, Pulse Output, RS-485 Tachometer/RPM/Line Speed Indicator

This is a great 3 phase power meter. It comes with a Modbus RTU RS-485 The AM5H is a budget priced 5 digit Panel Meter which can be pro- connection so you can easily connect it to your SCADA grammed to be a RPM indicator, a line speed indicator or a Tachometer. or building monitoring system. The ALT-078 and ALT-080 features a 4 to 20 mA analog retransmission Features: signal and a RS-485 modbus connection. • Measuring power parameters: V, A, W, Q (Var), S (VA), PF, Hz, KWH, KQH, DM (Demand) Features: • 1P2W /1P3W/ 3P3W/ 3P4W system programmable • Configurable wheel diameter and pulse per • Display range:-9999 to 9999, decimal point revolution for RPM and line speed modes selectable • 0 to 100 kHz NPN or dry contact input • 2 Alarms output or 2 Digital input / 2 Pulses out- • 4 to 20 mA Analog output with 15 bit resolu- put for forward KWH & reverse KWH. RS-485 communication optional tion and configurable zero and span (The above option can be exist together) • RS-485 communications via Modbus RTU • Provides 12 VDC auxiliary power for sensor. • CE approval Price Each 1 5+ • 0.03% of full scale accuracy

ALT-022 Digital panel meter with 2 alarms, Pulse $449.00 less 10% Price Each 1 5+ out, RS-485 ALT-077 Line speed meter AM5H-R-N2M-A R2NN less 10% $229.00 240 VAC 6 Digital Micro-Process Counter ALT-078 Line Speed, Frequency or RPM Meter with less 10% Features 4 to 20 mA Retransmission, 240 VAC $249.00 • Highbrightness 0.56” LEDdisplay:-199999~99999; Powered. • Max. input frequency: 7 KHz (1U2D/1P2D); 3 KHz (1A2B) ALT-079 Line Speed Meter AM5H-R-N2M-C-R2NN less 10% • Input pulse for pre-multiplcation & pre-division $229.00 • N/R/C relay output mode selectable 24VDC Powered • 2 to 4 alarms output programmable optional ALT-080 Line Speed, Frequency or RPM Meter less 10% • Analog output (15 bit resolution) optional with 4 to 20 mA Retransmission, 24 VDC $249.00 • RS-485 communication optional Powered. • Input Signal: NPN (12 V) ALT-081 RPM Meter AM5H-R-N2R-C-NAY 24VDC less 10% • Aux.Power: AC 110/220 V $249.00 Powered

ALT-082 RPM Meter AM5H-R-N2R-C-R2NN 24VDC less 10% $229.00 Price Each 1 5+ Powered ALT-030 6 Digit Micro-process counter $129.00 less 10% RLF-40A Tachometer/Line Speed Meter Potentiometer 5 Digit Micro-Process Meter RF-40A is a budget priced meter. “R.P.M.” function. Switches SW1-3, SW1- 4, SW1-5, SW1-6 can be used to set the fixed P.P.R. However, in RF-40A, This 5 digit indicator will allow you to easily display the position of a po- the function is determined by SW1-1, SW1-2, SW1-3, SW1-4. tentiometer. 24VDC powered with accuracy ±0.1%FS ± 1Digit At the low rates ( less 10 R.P.M.), with one pulse per revolution, the sampling time will be too long(over 6 seconds). The meter may judge the Features: • Highbrightness 0.56” LEDdisplay:-19999~99999 operation holding still and reset to zero. Hence a disc with mulitple slots • Potentiometer Range:500-10KΩ or teeth maybe needed. • 4 to 20 mA Analog Retransmission (ALT-084) Features: • High stability, non-flammable case (PC), high • Display Range: 0.1 to 9999 safety • Character Height: RED LED 0.8” • Input Signal: NPN: open collector • Sampling Time: 1.4 seconds Price Each 1 5+ • Frequence Response: 1 KHZ • Power Supply: AC 110 V/ 220 ±15%; ALT-083 Potentiometer 5 Digit micro-process $175.00 less 10% 50/60 Hz meter • Sensor Power: 12 VDC ±5%; 100 mA ALT-084 Potentiometer 5 Digit micro-process me- $249.00 less 10% ter 4 to 20 mA analog retransmission Price Each 1 5+ 5 Digit Micro-Process Load Cell Meter with Analog Output CPM-014 RLF-40A Tachometer/Line speed meter $175.00 less 10% This economical 5 digit indicator will allow you to easily display the weight on a load cell. A 4 to 20mA analog retransmission is Analog Flow Totaliser Indicator available. High stability, non-flammable case (PC), The KFM-TA is a budget priced programmable totaliser indicator. It accepts high safety. a 4 to 20 mA signal as a rate or flow. A 10 Digit Microprocessor Totaliser Features: Meter together with a 5 Digit Microprocessor Rate Meter • It requires 240VAC Features: • Accuracy of ±0.1%FS ±1Digit. • 10 Digit Micro-processor Totaliser Meter • Max Hold/Data Hold • 5 Digit Micro-processor Rate Meter Unique Features • Accuracy: Analog input: ±0.1% F.S. ±1digit -- 0 to 10 VDC analog retransmission (ALT-087) Pulse Input ±0.03%FS -- 4 to 20 mA analog retransmission (ALT-088 & ALT-089) • Rate of display range: 0 ~ 99999 -- Modbus RS-485 Connection (ALT-088 & ALT-089) • Rate/Total decimal point selectable -- 2mV/V Load Cell (ALT-087 & ALT-089) • Time unit selectable: sec/ min/ hour -- 1mV/V Load Cell (ALT-088) • Total scale programmable(0.0001 ~ 9.9999) • 2 Alarm Relays • (15bit resolution) optional Price Each 1 5+ • Roof square function available for analog input • Reset for Total by external control input ALT-087 5 Digit micro-process 2 mV/V L.C.M with $249.00 less 10% • CE approval, High stability, non-flammablecase(PC), highsafety analog out

ALT-088 5 Digit 1 mV/V L.C.M with analog out, $299.00 less 10% RS-485 Price Each 1 5+

ALT-089 5 Digit 2 mV/V L.C.M with Analog out $299.00 less 10% ALT-090 Analog 4 to 20 mA Rate Totaliser Meter $450.00 less 10% RS-485

Page 78 Ocean Controls Catalogue 2012 OCEANPANEL METERS CONTROLS & DISPLAYS

NPN Pulse Flow Totaliser Indicator Serial LCD Module The KFM-TA is a budget priced programmable totaliser indicator. It accepts The SerLCD v2.5 module is the latest serial LCD module from Spark Fun a NPN pulse signal as a rate or flow.A 10 Digit Microprocessor Totaliser Electronics that incorporates many new features. The Meter together with a 5 Digit Microprocessor Rate Meter SerLCD backpack takes care of all the HD44780 commands allowing seamless integration with any micro Features: that can communicate over a wide range of TTL serial • 10 Digit Micro-processor Totaliser Meter baud rates. • 5 Digit Micro-processor Rate Meter • Accuracy: Analog input: ±0.1% F.S. ±1digit The SerLCD v2.5 has the ability to drive up to 1A Pulse Input ±0.03%FS directly for backlight control or as a general purpose • Rate of display range: 0 ~ 99999 high-power control pin. SerLCD v2.5 currently • Rate/Total decimal point selectable supports 16 and 20 character wide screens with 2 or 4 lines of display. • Time unit selectable: sec/ min/ hour Contrast control is implemented through a trim pot on the module. Comes • Total scale programmable(0.0001 ~ 9.9999) with 3-pin screw terminal shown on right. • 2 Alarm Relays • (15bit resolution) optional Features: • Roof square function available for analog input • Adjustable baud rates of 2400, 4800, 9600, 14400, 19200 and 38400 • Reset for Total by external control input • Operational backspace • CE approval • Greater processing speed at 8 MHz • High stability, non-flammablecase(PC), highsafety • Incoming buffer stores up to 80 characters • Backlight transistor can handle up to 1 A • Pulse width modulation of backlight allows direct control of backlight Price Each 1 5+ brightness and current consumption • All surface mount design allows a backpack that is half the size of the ALT-091 NPN Pulse Rate Totaliser Meter $450.00 less 10% original • Faster boot-up time • Boot-up display can be turned on/off via firm-ware Basic Character LCD • User definable splash screen All LCDs are by 2 Lines Display and utilises the extremely common HD44780 parallel interface chipset. Interface code is freely available. Price Each 1 5+

LCD-001 Serial LCD Module $21.95 less 10% Modules Images

Serial Graphic LCD 128 × 64 or 160 × 128 This is a very large serial graphic LCD. The Serial Graphic LCD backpack is 8 × 2 Basic LCD FSTN white on blue soldered to the 160 × 128 pixel “Huge” Graphic LCD and provides the user a simple serial interface to a full range of controls. The smaller version is 128 × 64. Besides writing text, this serial graphic LCD allows the user to draw lines, circles and boxes, set or reset individual pixels, erase specific blocks of the display, control the backlight and adjust the baud rate. There’s also a 16 × 2 Basic LCD STN black on green, reverse mode that allows the screen to operate blue on white instead of 2 Line Display white on blue. Additionally, all source code for the ATMega168 processor is compiled using the free WinAVR compiler and is free for downloading. Features: • Voltage: 6 to 7 VDC 16 × 2 Basic LCD FSTN white on black • Current: 220 mA (backlight at 100%) • Input: 0 to 5 V, 115,200 bps (adjustable), 8 data 16 × 2 Basic LCD FSTN yellow on blue bits, 1 stop bit, no parity

Price Each 1 5+

LCD-060 Serial graphic LCD 160 × 128 $69.95 less 10% 16 × 2 Basic LCD FSTN red on black LCD-061 Serial graphic LCD 128 × 64 $34.95 less 10%

Serial LCD Module Kit This serial display module kit provides easy operation of a standard character LCD display from an RS-232 port. The simple ASCII command structure allows text and bar graphs to be displayed on the LCD. Provision 20 × 4 Basic LCD black on green is made for up to 8 user-defined characters. The module also includes four digital outputs. The driver module supports 2 interfaces: -- Serial RS-232 interface -- Serial TTL interface Price Each 1 5+ Features: • 32 Byte buffer for messages received via LCD-003 8 × 2 Basic LCD white on blue $9.50 less 10% communication interface LCD-002 16 × 2 Basic LCD black on green $13.95 less 10% • 9 Pin Female D Connector interface • Up to 8 custom characters can be LCD-011 16 × 2 Basic LCD white on black $19.95 less 10% defined • Built in commands for drawing bar LCD-012 16 × 2 Basic LCD yellow on blue $14.95 less 10% graphs • 4 digital outputs LCD-013 16 × 2 Basic LCD red on black $14.95 less 10% • Save the basic settings in module internal EEPROM LCD-032 20 × 4 Basic LCD black on green $29.95 less 10%

Price Each 1 5+

KIT-092 Serial LCD module kit $33.00 less 10%

Ocean Controls Catalogue 2012 Page 79 OCEANPANEL METERS CONTROLS & DISPLAYS

Color LCD 128 × 128 without carrier board 7-Segment Panel Meter Display This inexpensive LCD comes with a powerful white LED Have you ever had the need for a display that can be read from across the backlight and a relatively simple serial interface. It’s a 9 bit room? How about across the factory? How about 50 m away? This display interface, so beware. But we were able to get the LCD up uses Large 6” (15 cm), 7-Segment displays and can be expanded to use and running on a LPC2138 with a few hours worth of work. up to 10 digits, without costing upwards of a thousand of dollars. But Comes with a carrier board so you can easily interface to what does it display? The display has been designed to accept multiple in- the LCD put signals, for maximum flexibility. Parameters are set using a computer and saved to memory. Features: • LCD Logic: 3.3 V @2 to 3 mA Features: • LED Backlight: 7 V @40 to 50 mA (very bright) • Large 6” 7-Segment Display • Full 4,096 Colour Display • Easily add digits to display higher values • Uses the Epson S1D15G10 Compatible Controller • 2 x opto-isolated inputs • 1 x 10-bit 0 to 5 V input • 1 x 10-bit 0 to 20 mA input Price Each 1 5+ • RS-485 Serial, TTL Serial LCD-051 Color LCD without carrier board $14.00 less 10% • RS-232 Serial or USB Serial with additional converters • 12 to 17 VDC Powered

Graphic LCD 84 × 48 - Nokia 5110 Input signal types: The Nokia 5110 is a basic graphic LCD screen for • 0 to 5 V Scaled lots of applications. It was originally intended for as • 0 to 20 mA or 4 to 20 mA Scaled a cell phone screen. This one is mounted on an easy • Up/Down Counter with Reset and Preset to solder PCB. • Quadrature Up/Down Counter • Tachometer RPM It uses the PCD8544 controller. The PCD8544 is a • Frequency low power CMOS LCD controller/driver, designed to • Up/Down Second Timers drive a graphic display of 48 rows and 84 columns. • ASCII or Modbus Serial over RS-485 or TTL (or RS-232 using COV- All necessary functions for the display are provided 201) (or USB using ARD-011) in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum Price includes Red Acrylic of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface. Price Each 1 5+

Price Each 1 5+ KT5-255 5 Digit Panel meter $349.00 less 10%

SFC-004 Graphic LCD 84 × 48-Nokia 5110 $10.25 less 10% KTA-255 Main controller digit $65.00 less 10% KTA-256 Slave Digit $39.00 less 10%

7-Segment Red 6.5” Display ARD-011 FTDI basic breakout, 5V $21.50 less 10% No really - it’s 6 inches (153 mm) tall! This very large 7-segment display can be seen from a hundred feet away. So many Main Controller Digit as Kit without 7-segment display projects to try, so little time. This display uses Large 6” (15 cm), 7-Segment displays and can be expanded to use up to 10 digits, without costing upwards of a thousand of dollars. Parameters are set using a computer and saved to memory. Features: • Easily add digits to display higher values • 2 x opto-isolated inputs Price Each 1 5+ • 1 x 10-bit 0 to 5 V input LCD-100 7-segment red 6.5" Display $17.00 less 10% • 1 x 10-bit 0 to 20 mA input • RS-485 Serial, TTL Serial • RS-232 Serial or USB Serial with additional 7-Segment Serial Display converter • 12 to 17 VDC Powered The Serial 7-Segment Display can be controlled in one of two ways: (1) serial TTL communication or (2) SPI serial communication. Input signal types: -- 0 to 5 V Scaled Regardless of which method you use to communi- -- 0 to 20 mA or 4 to 20 mA Scaled cate with the display, the display is controlled with -- Up/Down Counter with Reset and Preset 4-byte packets and special 2-byte commands. -- Quadrature Up/Down Counter -- Tachometer RPM At the heart of the display is an ATMega328 which -- Frequency controls all the serial communications and the -- Up/Down Second Timers 4-digit 7-segment display through an easy-to-use -- ASCII or Modbus Serial over RS-485 or TTL API. -- (or RS-232 using COV-201) Features: -- (or USB using ARD-011) • 4 digit alpha-numeric display with serial (1 pin) or SPI interface (3 Note: Only KT5-255 includes plastic mounting, contact us if you pins) would like details on suitable plastic • Display numbers, most letters, and a few special characters • Individual control of decimal points, apostrophe, and colon • Selectable baud rate (4800 to 57600 bps) Price Each 1 5+ • Selectable brightness KIT-255 Main controller digit as a kit without $39.00 less 10% 7-segment display Price Each 1 5+ KTA-255 Main controller digit assembled without $48.00 less 10% LCD-111 7-Segment Serial Display Green $12.95 less 10% 7-segment display

LCD-112 7-Segment Serial Display Red $21.50 less 10% KIT-256 Slave Digit as a kit without 7-segment $16.00 less 10% display LCD-113 7-Segment Serial Display Yellow $12.95 less 10% KTA-256 Slave Digit assembled without 7-segment $22.00 less 10% LCD-114 7-Segment Serial Display Blue $12.95 less 10% display

Page 80 Ocean Controls Catalogue 2012 OCEANPANEL METERS CONTROLS & DISPLAYS

3 Channel RGB LED Controller Kit 16 × 120 Dot, 1 Line LED Message Displays This kit is a versatile LED control module. It provides 3 high current channels to create light effects for presentations, parties, etc. HBD-041 HBD-141 The module includes preprogrammed light sequences and can be used as a standalone LED controller. A simple command set allows easy module control via a serial interface to your microcon- Usage Indoor Semi-Outdoor troller or PC. Ideal for use with flexible LED Pixel RGa Matrix Module (Red, Green, light strips. Green Colour Amber Colours) Features: • 3 high current channels with independent control Specifications: • Suitable for common anode RGB LED strips, LEDs and incandescent -- Dimensions: 990 × 165 × 65 mm bulbs -- Resolution: 16 × 120 dots • 6 preprogrammed light sequences with hard transition effects (run- -- Dot pitch: 7.62 mm ning light, stroboscope, random colours, etc) and smooth effects -- Character Height: 38, 53, 76, or 114 mm (colour change, slow on/off, etc). -- Display characters: 2 × 20 (std. font) • Custom user-editable sequence -- Animation: 36 Screens • Wide-range effect speed adjust -- Memory: 512 kB flash • Memory for last selected sequence and user-editable sequence -- Mounting: Keyholes on back or two eyelets on top • Serial RS-232 and TTL interface to PC and/or microcontroller • Addressable - multiple modules can be connected with independent Features: control for each module • 16 × 120 pixel display with a range of fonts allow for 2 rows and 20 • Windows software to control module from PC and download user- columns of standard size text. editable sequence • 7.62 mm pitch high brightness LEDs • Small form factor - 56 × 39 mm (2.2 × 1.55 inches) • Up to 36 screens with a wide range of transitions and effects • Programmable via PC or included handheld remote Specifications: • Internal, battery-backed clock and calendar allows display of the date • Operating voltage (nominal): 12 VDC and time • Maximum channel current: 5 A • Automatic power on/off based on time of day and day of week option • Maximum total current: 12 A • RS-232 connection to PC for programming • PWM frequency: 480 Hz • 240 VAC powered • LED intensity control: 250 levels per channel • Serial interface: RS-232 & TTL, 9600 baud, 8N1 Price Each 1 5+

HBD-041 16 × 120 Dot, Indoor RGa LED message $734.00 less 10% Price Each 1 5+ display

KIT-091 3 Channel RGB LED Controller kit $40.00 less 10% HBD-141 16 × 120 Dot, Semi-Outdoor Green LED $949.00 less 10% message display

7 × 120 Dot, 1 Line LED Message Displays 32 × 120 Dot, 4 Line LED Message Displays HBD-009 HBD-072 HBD-171 HBD-072

Usage Indoor Semi-Outdoor

Colour Red Blue

Specifications: Usage Indoor Semi-Outdoor -- Dimensions: 990 × 105 × 50 mm Pixel RGa Matrix Module (Red, Green, -- Resolution: 7 × 120 dots Amber -- Dot pitch: 7.62 mm Colour Amber Colours) -- Character Height: 38, or 53 mm Specifications: - Display characters: 1 20 (std. font) - × -- Dimensions: 990 × 314 × 90 mm - Power: 240 V AC, 40 W - -- Resolution: 32 × 120 dots - Weight: 3.8 kg - -- Dot pitch: 7.62 mm - Animation: 36 Screens - -- Character Height: 38, 53, 76, 114, 175 or 236 mm -- Memory: 512 kB flash (HBD-110) - Display characters: 4 20 (std. font) 512 kB RAM (HBD-009) - × -- Animation: 36 Screens -- Interface: IR remote or RS-232 -- Memory: 512 kB flash -- Mounting: Keyholes on back or two eyelets on top -- Mounting: Keyholes on back or two eyelets on top Features: Features: • 7 × 120 pixel display with a range of fonts • 32 × 120 pixel display with a range of fonts allow for 4 rows and 20 • 7.62 mm pitch high brightness LEDs columns of standard size text. • Up to 36 screens with a wide range of transitions and effects • 7.62 mm pitch high brightness LEDs • Library of standard graphics • Up to 36 screens with a wide range of transitions and effects • Custom graphic creation utility • Programmable via PC or included handheld remote • Programmable via PC or included handheld remote • Internal, battery-backed clock and calendar allows display of the date • Internal, battery-backed clock and calendar allows display of the date and time and time • Automatic power on/off based on time of day and day of week option • Automatic power on/off based on time of day and day of week option • RS-232 connection to PC for programming • RS-232 connection to PC for programming • 240 VAC powered • 240 V powered

Price Each 1 5+ Price Each 1 5+ HBD-071 32 × 120 Dot, Indoor RGa LED message $995.00 less 10% HBD-009 7 × 120 Dot, Indoor Red LED message $435.00 less 10% display display with RAM memory HBD-172 32 × 120 Dot, Semi-outdoor amber LED $1249.00 less 10% message display

Ocean Controls Catalogue 2012 Page 81 OCEANPOWER CONTROLS SUPPLIES

LED Message Display Gateway Industrial DIN Rail Switchmode Supplies The KTA-270 Led Message Display Gateway is designed to operate with a These industrial DIN rail switchmode power supplies are available in 20 character, single line Led Message Display (LDM) (Part No HBD-009). 12 VDC, 24 VDC and 48 VDC output. They have temperature and over The gateway allows you to interface to different devices and display read- voltage protection and current limiting. They also have a built in EMI filter ings from the devices and display the values together with a message on and power on LED. All Switchmode comes with a 3 year warranty. the display. Dimensions 115W × 90D × 40H mm The gateway can operate in several modes: • Serial Ascii Strings • Addressed Serial Ascii Strings • RTU Modbus Master/Slave Control • Batch Count Up and Totalisation • CountUp/CountDown Timer • Stop Clock Timer

Price Each 1 5+

KTA-270 LED message display gateway $159.00 less 10%

Power Supplies 75 W 120 W 240 W 480 W 30 W Industrial DIN Rail Switchmode Supplies Input Volt- 85 to 264 VAC These 30 W Industrial DIN rail Switchmode power supplies are available in age 5 VDC, 12 VDC and 24 VDC output. ±2% @12 VDC ±1% Tolerance ±1% They have temperature and over voltage protection and current limiting. @24 VDC They also have a built in EMI filter and power on LED. They come with a EFficiency >75% >84% >89% 3 year warranty. It requires AC voltage from 85 to 264 with a tolerance ±1% and efficiency of >74%. Measurements 78x93x56mm 6.3 A Output @12 VDC 12.5 A 10 A @24 VDC 20 A @24 VDC Current 3.2 A @24 VDC

Measure- 126 100 126 227 100 126 100 56 125 mm × × × × ments × × mm mm

Price Each 1 3+ Price Each 1 5+ PSM-032 75 W Switchmode supply 12 VDC output $78.00 less 10% PSM-020 30 W Switchmode supply 5 VDC output $44.00 less 10% PSM-033 75 W Switchmode supply 24 VDC output $74.00 less 10% PSM-021 30 W Switchmode supply 12 VDC output $44.00 less 10% PSM-034 120 W Switchmode supply 12 VDC output $90.00 less 10% PSM-022 30 W Switchmode supply 24 VDC output $40.00 less 10% PSM-035 120 W Switchmode supply 24 VDC output $86.00 less 10%

PSM-039 120 W Switchmode supply 48 VDC output $90.00 less 10% 45 W Industrial DIN Rail Switchmode Supplies PSM-036 240 W Switchmode supply 24 VDC output $140.00 less 10% These 45 W Industrial DIN rail switchmode power supplies are available in 5 VDC, 12 VDC and 24 VDC output. They have temperature and over PSM-040 240 W Switchmode supply 48 VDC output $144.00 less 10% voltage protection and current limiting. They also have a built in EMI filter PSM-037 480 W Switchmode supply 24 VDC output $212.00 less 10% and power on LED. They have a 3 year warranty. PSM-038 480 W Switchmode supply 48 VDC output $216.00 less 10% Features • Input voltage from 85 to 264 VAC. • Tolerance ±1% (12 VDC), ±1% (24 VDC) Single Phase, 415 VAC, 120 W DIN Rail Switchmode • Efficiency >75% • Output Current 3.5 A(12 VDC) 2.0A (24 VDC) Supplies • Measurements 93 × 78 × 67 mm These 120 W, 415 VAC single phase switchmode power supplies are available in 24 VDC and 48 VDC output. They have temperature and over voltage protection and current limiting. They also have a built in EMI filter and power on LED. There's a 3 year warranty on any of the Switchmode supply. 85% efficiency. DC Adjustment range: -- 24 V: 24 to 28 V -- 48 V: 48 to 55 V Features Price Each 1 3+ • Input voltage from 340 to 550 VAC. • Output Current: 5 A (24 VDC) 2.5 A (48 VDC) PSM-029 45 W Switchmode supply 5 VDC output $48.00 less 10% • Measurements 100 × 66 × 125 mm PSM-030 45 W Switchmode supply 12 VDC output $48.00 less 10%

PSM-031 45 W Switchmode supply 24 VDC output $44.00 less 10% Price Each 1 5+ PSM-070 Single Phase 120 W Suply 24 VDC output $118.00 less 10%

PSM-071 Single Phase 120 W Supply 48 VDC $114.00 less 10% We are continually releasing new output products. Check our website for the latest additions at : www.oceancontrols.com.au

Page 82 Ocean Controls Catalogue 2012 OCEANPOWER CONTROLS SUPPLIES

3 Phase Industrial DIN rail Switchmode Supplies Slimline DIN Rail Switchmode Supplies These 3 Phase industrial DIN rail switchmode power supplies are available This Slimline DIN rail switchmode series has a in 24 VDC and 48 VDC output. They have temperature and over voltage wide range of power rating from 20 W up to 100 protection and current limiting. They also have a built in EMI filter and W with various VDC output. These supplies have power on LED. In addition there's a 3 year warranty on any of the switch- temperature and over voltage protection and cur- mode device. rent limiting. They also have a built in EMI filter and power on LED. DC OK relay contact indicator

20 W /40 W/60 W 100 W Single Output

105 % to 160% constanc Overload 105% to 150% Constant cur- current limiting, autore- Protection rent limiting, auto-recovery covery

Over voltage 115% to 135% Rated output 115% to 150% rated output protection Voltage shut off

Working tem- -20 to 50°C @100% -20 to 40°C @100% perature 70°C @50% load 60°C @50% load Input voltage 85 to 264 VAC

DC adjust- 240 W 480 W 960 W ±10% ±10% ment range Input Voltage 340 to 550 VAC 86% (@12 VDC) Efficiency Tolerance ±1% 88% (@24 VDC) Efficiency 89% >91% Output Cur- 3.4 A @ 12 VDC 8 A @ 12VDC Output Current 10 A (@24 VDC) 20 A (@24 VDC) 40 A(@24 VDC) rent 1.7 A @ 24 VDC 4 A @ 24VDC 5 A (@48 VDC) 10 A (@48 VDC) 20 A(@48 VDC) Measure- 22.5 × 90 × 100 mm 55 × 90 × 100 mm Measurements 126 × 100 × 126 27 × 100 × 126 276 × 100 × 126 ments 40 × 90 × 100 mm mm mm mm

Price Each 1 5+ Price Each 1 3+ PSM-150 20 W Slimline Switchmode supply 5 VDC $44.00 less 10% PSM-072 3 Phase, 240 W Supply 24 VDC output $158.00 less 10% PSM-151 20 W Slimline Switchmode supply 12 VDC $44.00 less 10% PSM-073 3 Phase, 240 W Supply 48 VDC output $162.00 less 10% PSM-152 20 W Slimline Switchmode supply 24 VDC $40.00 less 10% PSM-074 3 Phase, 480 W Supply 24 VDC output $224.00 less 10% PSM-162 40 W Slimline Switchmode supply 5 VDC $58.00 less 10% PSM-075 3 Phase, 480 W Supply 48 VDC output $228.00 less 10% PSM-153 40 W Slimline Switchmode supply 12 VDC $58.00 less 10% PSM-076 3 Phase, 960 W Supply 24 VDC output $402.00 less 10% PSM-154 40 W Slimline Switchmode supply 24 VDC $54.00 less 10% PSM-077 3 Phase, 960 W Supply 48 VDC output $406.00 less 10% PSM-155 40 W Slimline Switchmode supply 48 VDC $58.00 less 10% 40 A DC UPS Module DIN Rail Switchmode Supply PSM-163 60 W Slimline Switchmode supply 5 VDC $62.00 less 10% 40 A DC battery test and monitor module for 24 VDC power system. Ac- PSM-156 60 W Slimline Switchmode supply 12 VDC $62.00 less 10% companied by external batteries (not included) it can monitor up to 40 A PSM-157 60 W Slimline Switchmode supply 24 VDC $58.00 less 10% of current to critical loads. PSM-158 60 W Slimline Switchmode supply 48 VDC $62.00 less 10% With complete monitoring signals and LED indicators for DC bus OK, Battery Fail and Battery Discharge. An PSM-159 100 W Slimline Switchmode supply 12 $104.00 less 10% automatic battery test function to checks the situation of VDC external batteries every 25 seconds. Battery controller PSM-160 100 W Slimline Switchmode supply 24 $104.00 less 10% for DIN Rail UPS system. Measurements: 55.2 × 125.2 VDC × 100 mm PSM-161 100 W Slimline Switchmode supply 48 $104.00 less 10% VDC Price Each 1 5+

PSM-110 40 A DC UPS module DIN rail Switchmode $99.00 less 10% 15 W, 12V Cage Switchmode Power Supply The Mean Well NES series of switching power supply is capable of provid- DR-RDN20 DIN rail Mount 20A Redundancy Module ing 15 W, 12 V. It is miniature in size with a dimension of 98 × 51 × 28 mm. As well as having universal AC input from 88 to 264 VAC or 120 to 20 A redundancy (decoupling) module for 24 VDC power system. Contain- 370 VDC. ing 2 sets of 20 A Or-ing diodes with wonderful heat dissipation deploy- ment, DR-RDN20 gives you a new option for safe connection of a 1+1 There is also a short circuit, overload, over voltage and over temperature redundant supply set-up. protection. Cooling by free air convectio with 100% full load burn-in test and 2 years warranty. DR-RDN-20 also provides users monitoring signals for both input channels through the built-in relays. Since Specifications there's no switching components inside the module, • Output: 12 VDC, 0 to 1.3 A DR-RDN-20 will not generate additional EMI issues and • Ripple and Noise: 150 mV should provide you a worry-free application platform. • Efficiency (Typ.): 81% Measurements: 55.2 × 125.2 × 100 mm • 98 mm × 51 mm × 28 mm

Price Each 1 5+ Price Each 1 5+ PSM-112 20 A Redundancy Module $61.20 less 10% PSM-512 15 W, 12 V Cage switchmode power $20.00 less 10% supply

Ocean Controls Catalogue 2012 Page 83 OCEANPOWER CONTROLS SUPPLIES

320 W, 27 VDC, Switchmode Power Supply High Temperature 15 W switchmode supply 5/ 12/ 24VDC This power supply comes with over voltage, over temperature, over load output protection. It will automatically shut down in such These switchmode 5/ 12/ 24 VDC output power supplies are designed to situations and will recover automatically once the operate over a wide ambient temperature of -20 to 70 °C. temperature cools off. They are compact and have over voltage and current limiting protection. Specifications: They also have UL/TUV/CE approvals. Powered from 85 to 264 VAC they • Input Voltage: 88 to 264 VAC 120 to 370 VDC are fitted with screw terminals for easy connections. • Input Frequency: 47 to 63 Hz • Inrush Current: 20 A / 115 VAC, 40 A / 230 VAC Features: • Leakage Current: < 1 mA / 240 VAC • Protections: Short circuit / Overload / Over volt- • Over Load Protect:105 to 135% rated output power age / Over temperature • Hiccup mode, recovers automatically after fault condition is removed • Dimensions: 62.5 × 51 × 28 mm • Safety Standards: UL60950-1, TUV EN60950-1 Approved • Cooling by free air convection • Dimensions: 215 × 115 × 50 mm • LED indicator for power on • 100% full load burn-in test • Withstand 300 VAC surge input for 5 second, 5G vibration test Price Each 1 5+

PSM-200 320 W 27 VDC Power supply $126.00 less 10% Price Each 1 5+

PSM-2512 High Temp 15 W Supply 5 VDC output $22.00 less 10% 500 W, 27 VDC, Switchmode Power Supply PSM-2513 High Temp 15 W Supply 12 VDC output $22.00 less 10% SP-500 series is a 500 Watts AC/DC single output power supply with power factor correction (PFC) function. PSM-2514 High Temp 15 W Supply 24 VDC output $22.00 less 10% Features: • Input Voltage: 88 to 264 VAC High Temperature 25 W switchmode supply 5/ 12/ 24VDC • Output Voltage/Current: 27 VDC @18 A output • Rated Power: 486 W • Over-voltage protection, and over temperature These switchmode 5/ 12/ 24 VDC output power supplies are designed to protection. The SP-500 series comes with a 3 operate over a wide ambient temperature of -20 to 70 °C. years warranty • Dimensions: 170 × 120 × 93 mm They are compact and have over voltage and current limiting protection. They also have UL/TUV/CE approvals. Universal power input allows them to run from 88 to 264 VAC Price Each 1 5+ Features: PSM-201 500 W 27 VDC power supply $246.00 less 10% • Protections: Short circuit / Overload / Over voltage / Over temperature • Cooling by free air convection Switchmode Supplies, 12 or 24 VDC output • Dimensions: 78 × 51 × 28 mm These switchmode power supplies are available in 12 and 24 VDC output. • LED indicator for power on They are over voltage protected and current limited with UL/TUV/CE • 100% full load burn-in test approvals. Powered from 85 to 260 VAC, they are fitted with screw ter- • Withstand 300 VAC surge input for 5 second, 5 G vibration test minals. All have ±1% tolerance, with a ±10% DC adjust range and come with a 2 years warranty.

12/24VDC 40 W 60 W 100 W 150 W 25 W Price Each 1 5+

Effiency >75% >80% >75% PSM-2521 High Temp 25 W Supply 5 VDC output $29.95 less 10%

Measure- 129×98 199 × 110 × 99 × 97 × PSM-2522 High Temp 25 W Supply 12 VDC output $29.95 less 10% 159 × 98 × 38 mm ments ×38 mm 50 mm 35 mm PSM-2523 High Temp 25 W Supply 24 VDC output $29.95 less 10% 3.5 A 5.1 A 8.5 A 12.5 A 5 A Output @12 VDC @12 VDC @12 VDC @12 VDC @12 VDC High Temperature 35 W switchmode supply 5/ 12/ 24 VDC Current 1.8 A 2.7 A 4.5 A 6.7 A 1.1 A @24 VDC @24 VDC @24 VDC @24 VDC @24 VDC output These switchmode 5/ 12/ 24 VDC output power supplies are designed to operate over a wide ambient temperature of -20 to 70 °C. They are compact and have over voltage and current limiting protection. They also have UL/TUV/CE approvals. Universal power input allows them to run from 88 to 264 VAC Features: • Protections: Short circuit / Overload / Over voltage Price Each 1 3+ / Over temperature • Cooling by free air convection PSM-001 40 W Switchmode supply 12 VDC output $36.00 less 10% • LED indicator for power on • 100% full load burn-in test PSM-002 40 W Switchmode supply 24 VDC output $36.00 less 10% • Dimensions: 99 × 82 × 36 mm PSM-003 60 W Switchmode supplyy 12 VDC output $40.00 less 10% • Withstand 300 VAC surge input for 5 second, 5 G vibration test PSM-004 60 W Switchmode supply 24 VDC output $40.00 less 10%

PSM-005 100 W Switchmode supply 12 VDC output $48.00 less 10% Price Each 1 5+

PSM-006 100 W Switchmode supply 24 VDC output $48.00 less 10% PSM-2531 High Temp 35 W Supply 5 VDC output $31.95 less 10%

PSM-007 150 W Switchmode supply 12 VDC output $56.00 less 10% PSM-2532 High Temp 35 W Supply 12 VDC output $31.95 less 10%

PSM-008 150 W Switchmode supply 24 VDC output $56.00 less 10% PSM-2534 High Temp 35 W Supply 24 VDC output $31.95 less 10% PSM-012 150 W Switchmode supply 48 VDC output $56.00 less 10%

PSM-009 25 W Switchmode supply 5 VDC output $30.00 less 10%

PSM-010 25 W Switchmode supply 12 VDC output $30.00 less 10% PSM-011 25 W Switchmode supply 24 VDC output $30.00 less 10%

Page 84 Ocean Controls Catalogue 2012 OCEANPOWER CONTROLS SUPPLIES

High Temperature 50 W switchmode supply 5/ 12/ 24 VDC 40 W Multiple Rail Switchmode Supplies output These 40 W Multiple rail switchmode supplies incorpo- These switchmode 5/ 12/ 24 VDC output power supplies are designed rate short circuit, over load and over voltage protection to operate over a wide ambient temperature of -20 to 70 °C. They are with CSA/CE/NRTLC approvals. compact and have over voltage and current limiting protection. They also Features: have UL/TUV/CE approvals. Universal power input allows them to run from • Input Voltage: 85 to 264 VAC 88 to 264 VAC • Tolerance: ±2% 5 VDC, ±6% 12 VDC and 15 VDC. Features: • Ripple and Noise: 100 mV on 5 VDC, 120 mV on 12 VDC and 15 VDC. • Protections: Short circuit / Overload / Over voltage / Over temperature • It has an efficiency of 72%. • Cooling by free air convection • Measurements: 129(L) × 98(W) × 38(H) mm • LED indicator for power on • 100% full load burn-in test Price Each 1 3+ • Dimensions: 99 × 97 × 36 mm • Withstand 300 VAC surge input for 5 second, 5 G vibration test PSM-051 +5 VDC/ 3 A, +12 V/ 2 A & -5 VDC/ 0.5 A $42.00 less 10% • No load power consumption <0.5 W PSM-052 +5 VDC/ 3 A, +12 V/ 2 A & -12 VDC/ $42.00 less 10% 0.5 A Price Each 1 5+ PSM-053 +5 VDC/ 3 A, +15V/1.5A & -15 VDC/ $42.00 less 10% PSM-2541 High Temp 50 W Supply 5 VDC output $34.95 less 10% 0.5 A

PSM-2542 High Temp 50 W Supply 12 VDC output $34.95 less 10%

PSM-2544 High Temp 50 W Supply 24 VDC output $34.95 less 10% 60 W Multiple Rail Switchmode Supplies These 60 W Multiple rail switchmode supplies incorporate short circuit, over load and over voltage protection with UL/CUL/ High Temperature 100 W switchmode supply 12/ 24/ 48 TUV/CE/TB approvals. VDC output Features: These switchmode 5/ 12/ 24 VDC output power supplies are designed to • Input Voltage: 85 to 264 VAC operate over a wide ambient temperature of -20 to 70 °C. No load power • Tolerance: ±2% 5 VDC, ±6% 12 VDC and 15 consumption <0.5 W. All using 105 °C long life electrolytic capacitors VDC. • It has an efficiency of 72%. They are compact and have over voltage and current limiting protection. • Measurements: 159(L) × 97(W) × 38(H) mm They also have UL/TUV/CE approvals. Universal power input allows them to run from 88 to 264 VAC Price Each 1 3+ Features: PSM-054 +5 VDC/ 7 A, +12 V/ 3.5 A & -5 VDC/1 A $46.00 less 10% • Protections: Short circuit / Overload / Over voltage / Over temperature PSM-055 +5 VDC/ 5 A, +12 V/ 3.5 A & -12 VDC/ $46.00 less 10% • Cooling by free air convection 1 A • LED indicator for power on • 100% full load burn-in test PSM-056 +5 VDC/ 5 A, +15 V/ 2 A & -15 VDC/ $46.00 less 10% • Dimensions: 159 × 97 × 38 mm 0.5 A • Withstand 300 VAC surge input for 5 second, 5 G vibration test 120 W Multiple Rail Switchmode Supplies Price Each 1 5+ The 120 W mutiple DIN rail switchmode supplies PSM-2562 High Temp 100 W Supply 12 VDC output $59.95 less 10% incorporate short circuit, over load and over voltage protection with UL/CUL/TUV/CE/TB approvals. PSM-2564 High Temp100 W Supply 24 VDC output $59.95 less 10% Features: PSM-2565 High Temp 100 W Supply 48 VDC output $59.95 less 10% • Input Voltage: 85-264VAC • Tolerance: ±2% 5 VDC, ±6% -5 VDC 12 VDC and -12 VDC. High Temperature 150 W switchmode supply 12/ 24/ 48 • It has an efficiency of >75%. VDC output • Measurements: 199(L) × 110(W) × 38(H) mm These switchmode 5/ 12/ 24 VDC output power supplies are designed to operate over a wide ambient temperature of -20 to 70 °C. They are com- Price Each 1 3+ pact and have over voltage and current limiting protection. All using 105 PSM-057 120 W supply +5 V/ 11 A, +12 V/ 4 A, $78.00 less 10% °C long life electrolytic capacitors -5 V/ 1 A, -12 V/ 1 A

They also have UL/TUV/CE approvals. Switch-selectable for 88 to 132 VAC PSM-058 120 W supply +5 V/ 10 A, +15 V/ 3.5 A, $78.00 less 10% or 176 to 264 VAC. Output voltage can be adjusted ±10%. They are fitted -5 V/ 1 A, -15 V/ 1 A with screw terminals for easy connections. PSM-059 120 W supply +5 V/ 8 A, +12 V/2 A, $78.00 less 10% Features: +24 V/ 2 A, -12 V/ 1 A • Protections: Short circuit / Overload / Over voltage / Over temperature • Cooling by free air convection 126 W Dual Output Switching Power Supply +5 VDC and • LED indicator for power on +24 VDC • 100% full load burn-in test • Dimensions: 199(L) × 110(W) × 50(H) mm Dual output rail switching mode power supply capable of providing 126 W • Withstand 300 VAC surge input for 5 second, 5 G vibration test total across both outputs. Provides 5 VDC at up to 6 A (30 W) and 24 VDC at up to 4 A (96 W). 2 years warranty. Features: Price Each 1 5+ • AC input range selected by switch • Short circuit, Overload and Over voltage PSM-2572 High Temp 150 W Supply 12 VDC output $61.95 less 10% protection • Cooling by free air convection PSM-2574 High Temp 150 W Supply 24 VDC output $61.95 less 10% • 100% full load burn-in test PSM-2575 High Temp 150 W Supply 48 VDC output $61.95 less 10% • Dimensions: 199 × 110 × 50 mm • Fixed switching frequency at 28 kHz • UL/CUL/TUV/CE/TB approvals

Price Each 1 5+

PSM-060 126 W Dual Output Power Supply $78.00 less 10%

Ocean Controls Catalogue 2012 Page 85 OCEANDC-DC CONTROLSCONVERTERS

Positive/Negative Adjustable Power Supply Switchmode Plug Packs A compact, easy to build and use, positive variable power supply module. Powered from 240 VAC this switchmode plug pack It is ideal for powering any application requiring a DC supply at current has a 9 VDC output which is supplied with a 2.1 mm levels up to 1.5 A. plug or tip only. Can be combined with PSU-009/011 to create a Packs Available: dual-rail supply. AC or DC input voltage. Variable • PLP-002 Regulated 9 VDC, 0.67 A Plug Pack output voltage from 1.2 to 35 V. LED power on • PLP-003 Non Regulated 12 VDC, 500 mA Plug indication. Ouput reverse polarity and back-voltage Pack protection. On board heatsink for regulator IC • PLP-004 Regulated 24 VDC, 1 A Plug Pack (LM317T) • PLP-007 Regulated 12 VDC, 1 A Plug Pack • PLP-008 12 VDC, 2.5 A Plug Pack • PLP-009 5 VDC, 3 A Plug Pack

Price Each 1 5+

PSU-009 Positive adjustable PS as kit $22.50 less 10%

PSU-010 Positive adjustable PS assembled $35.00 less 10% Price Each 1 5+

PSU-011 Negative adjustable PS as kit $22.50 less 10% PLP-002 Regulated 9 VDC, 0.67 A plug pack $16.00 less 10%

PSU-012 Negative adjustable PS assembled $35.00 less 10% PLP-003 Non-Regulated 12 VDC, 500 mA plug pack $14.55 less 10% PLP-004 Regulated 24 VDC, 1 A plug pack $20.00 less 10%

IP67 Power Supply PLP-007 Regulated 12 VDC, 1 A plug pack $19.50 less 10%

These power supplies are rated at IP67 for indoor or outdoor installations PLP-008 Regulated 12 VDC, 2.5 A plug pack $28.00 less 10% which means they are totally protected against dust and protected against the effects of temporary immersion in water between 15cm and 1m. PLP-009 5 VDC, 3 A plug pack $20.82 less 10% Duration of test 30 minutes. There is protection against short circuit/overload/overvoltage/ over temperature. Suitable for LED lighting and DC-DC Converters moving sign applications. UL1310 Class 2 power unit. 25 W Single Output DC-DC converter This 25 W single output DC-DC converter series comes with built in EMI filter. It also has over voltage protection, short circuit and overload pro- Price Each 1 5+ tection with UL/TUV/CE approvals. 500 VDC I/O isolation with line/load PSM-180 IP67 power supply 12 VDC 5 A $124.00 less 10% regulation ±0.5%. It has an efficiency percentage greater than 70 % and ripple and noise less than 150 mV. PSM-181 IP67 power supply 15 VDC 5 A $124.00 less 10% Models available: PSM-182 IP67 power supply 20 VDC 4.8 A $124.00 less 10% • PDC-001 9.2 to 18 V(Input) 12 V, 2.1 A(Output) PSM-183 IP67 power supply 24 VDC 4 A $124.00 less 10% • PDC-002 9.2 to 18 V(Input) 24 V, 1.1 A(Output) • PDC-003 19 to 36 V(Input) 12 V, 2.1 A(Output) PSM-184 IP67 power supply 24 VDC 3.5 A $124.00 less 10% • PDC-004 19 to 36 V(Input) 24 V, 1.1 A(Output)

PSM-185 IP67 power supply 36 VDC 2.6 A $124.00 less 10% Price Each 1 5+ PSM-186 IP67 power supply 48 VDC 2 A $124.00 less 10% PDC-001 25 W Single Output DC-DC 9.2 to $54.00 less 10% 18 V(input) 12 V/ 2.1 A (output) 5 VDC USB Power Supply PDC-002 25 W Single Output DC-DC 9.2 to $54.00 less 10% 5 VDC USB Power Supply, 100 to 240 18 V(input) 24 V/ 1.1 A (output) VAC Powered (Left), 12 VDC Car Powered (Right) PDC-003 25 W Single Output DC-DC, 19 to $54.00 less 10% 36 V(input) 12 V/ 2.1 A (output)

PDC-004 25 W Single Output DC-DC, 19 to $54.00 less 10% 36 V(input) 24 V/ 1.1 A (output) Price Each 1 3+

USB-010 5 VDC USB power supply 100 to 240 VAC $18.14 less 10% 50 W Single Output DC-DC converter

USB-011 5 VDC USB power supply 12 VDC car $8.32 less 10% This 50 W single output DC-DC converter series comes with built in EMI powered filter. It also has over voltage protection, short circuit and overload protection with UL/TUV/CE approvals. Multi-Voltage Plug Pack Features: • 500 VDC I/O isolation with line/load regulation A slim line multi-voltage plug pack with the adjustment switch on the side ±0.5%. of the unit that faces the wall when installed. This prevents accidental • It has an efficiency of ≥70 % change of output voltage which may cause damage to a connected appli- • Insulation resistance 100 MΩ @500 VDC with out- ance. put current 4.2 A (@12 VDC) 2.1 A (@24 VDC) 6 Tips variation: • 800 mA @ 12 V Price Each 1 5+ • 1 A @ 9 V • 1.2 A @ 7.5 V PDC-005 50 W Single Output DC-DC 9.2 to $66.60 less 10% • 1.5 A @ 6 V, 18 V(input) 12 V/ 4.2 A (output) • 1.6 A @ 3 V , 4.5 V PDC-006 50 W Single Output DC-DC 9.2 to $66.60 less 10% 18 V(input) 24 V/ 2.1 A(output)

Price Each 1 5+ PDC-007 50 W Single Output DC-DC, 19 to $66.60 less 10% PLP-001 Switchmode power plug 1.2 A, 3, 4.5, 6, $35.00 less 10% 36 V(input) 12 V/ 4.2 A(output) 7.5, 9, 12 VDC PDC-008 50 W Single Output Dc-DC, 19 to $66.60 less 10% 36 V(input) 24 V /2.1 A(output)

Page 86 Ocean Controls Catalogue 2012 OCEANDC-DC CONTROLSCONVERTERS

100 W Single Output DC-DC converter 5 to 6 W DC-DC Regulated Single and Dual Output This 100 W single output DC-DC converter series comes with built in EMI The 5 to 6 W DC-DC regulated converters series is available in twp types filter. It also has over voltage protection, short circuit and overload protec- of output that is the single and the dual output. It has five sided shield tion with UL/TUV/CE approvals. metal case as well as a built in EMI filter. There is a 2 years warranty on this DC-DC converter series. It also has an overload and Features: short circuit protection. • Output Current 8.5 A (@12VDC) 4.2 A (@24VDC) • 500 VDC I/O isolation with line/load regulation Features: ±0.5%. • 1000 VDC I /O isolation, 100% full load burn-in test • It has an efficiency of ≥ 70 % • Cooling by free air convection

Price Each 1 5+ Price Each 1 5+

PDC-011 100 W, Single Output DC-DC, 19 to $66.60 less 10% SDC-501 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% 36 V(input) 12 V @8.5 A (output) 9 to 18 VDC input, 5 V output

PDC-012 100 W, Single Output DC-DC, 19 to $66.60 less 10% SDC-503 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% 36 V(input) 24 V @4.2 A(output) 9 to 18 VDC input, 12 V output

SDC-505 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% DC-DC Converter Breakout 18 to 36 VDC input, 5 V output This is a SMD non-isolated DC-DC converter that can SDC-507 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% deliver up to 6 A of output current. These modules provide 18 to 36 VDC input, 12 V output precisely regulated output voltage programmable via exter- SDC-509 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% nal resistor and capacitor from 0.59 to 5.5 VDC over a wide 36 to 72 VDC input, 5 V output range of input voltage (VIN = 4.5 to 14 V). SDC-511 DC-DC Regulated Single Output, 5 to 6 W $30.42 less 10% A converter breakout board is also available with similar fea- 36 to 72 VDC input, 12 V output tures to the converter module. The module can convert any DC voltage between 4.5 to 14 VDC to a selectable voltage DDC-501 DC-DC Regulated Dual Output, 5 to 6 W 9 $33.84 less 10% to 18 VDC input, ±5 V output between 0.59 and 5.5 VDC. DDC-502 DC-DC Regulated Dual Output, 5 to 6 W 9 $33.84 less 10% to 18 VDC input, ±12 V output Price Each 1 5+ DDC-504 DC-DC Regulated Dual Output, 5 to 6 W $33.84 less 10% PDC-061 DC-DC converter breakout $27.82 less 10% 18 to 36 VDC input, ±5 V output

DDC-505 DC-DC Regulated Dual Output, 5 to 6 W $33.84 less 10% 1 W DC-DC Unregulated Single Output 18 to 36 VDC input, ±12 V output This 1 W DC-DC unregulated single output series come with internal SMD DDC-507 DC-DC Regulated Dual Output, 5 to 6 W $33.84 less 10% technology and built in EMI filter. As well as short circuit 36 to 72 VDC input, ±5 V output protection and can be cooled down by free air convec- DDC-508 DC-DC Regulated Dual Output, 5 to 6 W $33.84 less 10% tion. The converters are enclosed in a non-conductive 36 to 72 VDC input, ±12 V output plastic case. 1000 VDC I/O isolation with 100% full load burn-in test. SIP package is also available. 12 W DC-DC Regulated Single and Dual Output Price Each 1 5+ This 12 W DC-DC regulated converter series has two types of output, one SDC-001 1 W, 5±10% VDC in, 5 VDC out $12.60 less 10% is a single output and the other is dual output. It comes in a five-sided shield metal case, with built in remote for ON/OFF control. Also has pro- SDC-003 1 W, 5±10% VDC in, 12 VDC out $12.60 less 10% tection for short circuiting and overloading. SDC-005 1 W, 12±10% VDC in, 5 VDC out $12.60 less 10% Features: SDC-007 1 W, 12±10%VDC in, 12 VDC out $12.60 less 10% • 1500 VDC I /O isolation, 100% full load burn-in test • Cooling by free air convection SDC-009 1 W, 24±10% VDC in, 5 VDC out $12.60 less 10%

SDC-011 1 W, 24±10% VDC in, 12 VDC out $12.60 less 10% Price Each 1 5+

SDC-701 DC-DC Regulated Single Output, 12 W 9 $52.74 less 10% 3 W DC-DC Regulated Single and Dual Output to 18 VDC (in) 5 VDC (out)

This 3 W DC-DC regulated converter series is available in SDC-702 DC-DC Regulated Single Output, 12 W 9 $52.74 less 10% two types of output that is the single and the dual output. to 18 VDC (in) 12 VDC (out) It also has built in EMI filter as well as short circuit and overload protection. 2:1 wide input range with 1000 VDC SDC-704 DC-DC Regulated Single Output, 12 W 18 $52.74 less 10% to 36 VDC (in) 5 VDC (out) I/O isolation. 100% full load burn-in test SDC-705 DC-DC Regulated Single Output, 12 W 18 $52.74 less 10% to 36 VDC (in) 12 VDC (out) Price Each 1 5+ SDC-707 DC-DC Regulated Single Output, 12 W 36 $52.74 less 10% SDC-301 3 W, 9 to 18 VDC input, 5 VDC output $27.54 less 10% to 72 VDC (in) 5 VDC (out)

SDC-302 3 W, 9 to 18 VDC input, 12 VDC output $27.54 less 10% SDC-708 DC-DC Regulated Single Output, 12 W 36 $52.74 less 10% SDC-304 3 W, 18 to 36 VDC input, 5 VDC output $27.54 less 10% to 72 VDC (in) 12 VDC (out)

SDC-305 3 W, 18 to 36 VDC input, 12 VDC output $27.54 less 10% DDC-701 DC-DC Regulated Dual Output, 12 W 9 to $55.62 less 10% 18 VDC (in) ±5 VDC (out) SDC-307 3 W, 36 to 72 VDC input, 5 VDC output $27.54 less 10% DDC-702 DC-DC Regulated Dual Output, 12 W 9 to $55.62 less 10% SDC-308 3 W, 36 to 72 VDC input, 12 VDC output $27.54 less 10% 18 VDC (in) ±12 VDC (out)

DDC-301 3 W, 9 to 18 VDC input, ±5 VDC output $28.98 less 10% DDC-704 DC-DC Regulated Dual Output, 12 W 18 $55.62 less 10% to 36 VDC (in) ±5 VDC (out) DDC-302 3 W, 9 to 18 VDC input, ±12 VDC output $28.98 less 10% DDC-705 DC-DC Regulated Dual Output, 12 W 18 $55.62 less 10% DDC-304 3 W, 18 to 36 VDC input, ±5 VDC output $28.98 less 10% to 36 VDC (in) ±12 VDC (out)

DDC-305 3W, 18 to 36 VDC input, ±12 VDC output $28.98 less 10% DDC-707 DC-DC Regulated Dual Output, 12 W 36 $55.62 less 10% to 72 VDC (in) ±5 VDC (out) DDC307 3 W, 36 to 72 VDC input, ±5 VDC output $28.98 less 10% DDC-708 DC-DC Regulated Dual Output, 12 W 36 $55.62 less 10% DDC-308 3 W, 36 to 72 VDC input, ±12 VDC output $28.98 less 10% to 72 VDC (in) ±12 VDC (out)

Ocean Controls Catalogue 2012 Page 87 OCEANBATTERY CHARGERS CONTROLS & INVERTERS

Battery Chargers & Inverters LiPoly Charger - Single Cell 3.7 to 7 V Input This is a Polymer Lithium Ion battery charger based on the MAX1555 IC. This charger uses either USB bus power (MAX1555 internally limits this to 300 W Single Output Battery Charger 100 mA) or 2.1 mm center positive wall-wart power (MAX1555 internally 300 W battery charger for open and sealed lead-acid batteries. Suits 60 limits this to 300 mA). to 200 Ah worth of battery capacity. An intelligent, 3-stage controller Current is automatically reduced to a trickle when charging is complete. charges the battery bank to 14.4 V, holds the voltage there then main- Cheap, easy to use, and flexible, this board serves as a great demo board tains a float 13.6 V output. Powered from 176 to 264 VAC; it is fitted with for the MAX1555. This charger is a ‘must have’ for quick and clean charg- terminal connections. ing of Lithium Polymer chemistry batteries. Features: Features: • AC 115/ 230 VAC selected by switch • Do not use this charger to charge NiMH, • Built-in passive PFC function compliance to NiCd, or any other battery type EN61000-3-2 Class A (option) • Comes fully assembled and tested • Protection: Short circuit / Reverse polarity / Over voltage / Over temperature • Requires 3.7V to 7 V (max) Input • Cooling by free air convection, Charger for • Separate header for external power in lead-acid batteries • Separate headers for battery and load • 2 color LED loading indicator system • Low cost, High reliability

Price Each 1 5+ Price Each 1 5+ BAT-003 LiPoly charger-Single cell 3.7 to 7 V input $22.60 less 10% PSM-101 300 W, Single Output Battery charger $126.00 less 10% +13.6 VDC

PSM-102 300 W, Single Output Battery charger $126.00 less 10% LiPoly Fast Charger - 5 to 12 V Input +27 VDC A SparkFun original Lithium Polymer charger. This little black box charges PSM-103 300 W, Single Output Battery charger $126.00 less 10% single cell lithium polymer batteries with a max rate of 1A. This works well 54 VDC with our 5V/1A regulated supply. The charge output is via a 2-pin screw terminal. Power Supply With Battery Charger Top pin is ground, bottom pin is charge pin. Based on the popular Microchip part MCP73843-410. Features short circuit, over load and over voltage protection. Battery low and Battery polarity protection. Approvals include UL/CUL/TUV/CB/CE. Free air cooling convection. Powered from 88 to 264 VAC they are fitted with screw terminals. Price Each 1 5+ BAT-004 Lipoly fast charger -5 to 12 V input $27.65 less 10% 55 W 155 W

±2% 13.8 V Tolerance ±1% Polymer Lithium Ion Batteries ±1% 27.6 V & 54 V This type of battery is small, compact and light in weight as they are 150 mV on 13.8 V and Ripple and Noise 100 mV based on the new Polymer Lithium Ion chemistry. 27.6 V, 240 mV on 54 V

Efficiency >71% >80%

-10 to 50°C @70% (without fan) Working Temperature 0 to 50°C -10 to 50°C @100% (with fan)

Measurements(LxWxH) 159 × 97 × 38 mm 199 × 110 × 50 mm It has the highest energy density currently in production. Each cell outputs a nominal 3.7 V and comes terminated with standard 2-pin JST connector- 2 mm spacing between pins. These batteries require special charging, therefore DO NOT attempt to charge these with any-thing but a specialized Lithium Polymer charger. Features: • 2C Continuous discharge- very high for low price • Excellent long term self-discharge rates (<8% per month) • Robust power source under extreme conditions (-25 to 60°C) Price Each 1 5+

PSM-104 55 W Power Supply 13.8 VDC/ 4 A, Bat- $56.00 less 10% tery Charger 13.4 V/ 0.23 A

PSM-105 55 W Power Supply27.6 VDC/ 2 A supply, $56.00 less 10% Battery Charger 26.5 V/ 0.16 A

PSM-106 155 W Power Supply 13.8 V/ 11 A, Bat- $108.00 less 10% tery Charger 5 V/ 3 A & 13.3 V/ 0.5 A

PSM-107 155 W Power Supply 27.6 V/ 5.5 A, Bat- $108.00 less 10% Price Each 1 5+ tery Charger 5 V/ 3 A & 27.1 V/ 0.5 A BAT-006 Polymer lithium Ion batteries- 20 mAh $6.50 less 10% PSM-108 155 W Power Supply 54 V/ 2.7 A, Battery $108.00 less 10% BAT-002 Polymer Lithium Ion batteries -860 mAh $11.95 less 10% Charger 5 V/ 3 A & 53.5 V/ 0.5 A BAT-005 Polymer Lithium Ion batteries-100 mAh $8.34 less 10% The website will apply discounts for BAT-009 Polymer lithium ion battery 1000 mAh $11.95 less 10% bulk purchases for all customers. Price BAT-007 Polymer Lithium ion batteries -2000 mAh $17.95 less 10% breaks and discount levels vary from BAT-008 Polymer Lithium ion batteries -6 Ah $42.95 less 10% item to item but are typically 10% discount for 5+ and 15% discount for 10+.

Page 88 Ocean Controls Catalogue 2012 OCEANSECURITY CONTROLS

12 mm Coin Cell Battery VPack3.3 V 1-AAA/AA Battery Holder w/ 3.3 V Regulator CR1225 12 mm, 3 V, 47 mAh coin cell batteries. Perfect This battery holder from Bodhilabs takes one AAA/AA cell and has an small battery for miniature sensor node applications. efficient 3.3 V step-up regulator on the back, giving you a simple power Dimensions : 12.5 mm × 2.5 mm source for your 3V3 circuits. It comes with a step-up DC-to-DC converter on the back that can provide up to 100 mA, and there is a jumper that can be removed to disconnect the batteries from the regulator and give you direct access to the battery voltage. Price Each 1 Specifications: BAT-100 12 mm Coin Cell Battery $2.00 • Weight: 5.1 g • Maximum supply current: 100 mA Modified Sine Wave Inverters • Default output voltage: 3.3 V • Lead length: 4.5 in • Cells: 1 • Cell type: AAA/AA

Price Each 1 5+

POL-797 Vpack3.3V 1-AAA battery holder w/3.3V $17.50 less 10% This 150, 300 ,600 & 1000 W modified sine wave DC/AC Inverter has regulator been designed for easy use in cars. They come with a one year warranty. POL-796 Vpack3.3V 1-AA battery holder w/3.3V $17.50 less 10% Features: regulator • 12 VDC input • 230 VAC, 50 Hz Modified sine wave output (Australian-style socket) • Power ON-OFF switch VPack5.0 V 2-AAA/AA Battery Holder w/ 5 V Regulator • Cigarette lighter plug • Low battery alarm This battery holder from Bodhilabs takes two AAA/AA cells and has an effi- • Over voltage, over temperature and overload protection shutdown cient 5 V step-up regulator on the back, giving you a simple power source • Input polarity protection for your 5 V circuits. This battery holder from Bodhilabs is just what you need. It comes with a step-up DC-DC converter on the back that can provide up to 200 mA Price Each 1 5+ (typical; 500 mA max), and there is a jumper that can be removed to PDC-205 150 W DC/AC Inverter input 12 VDC $49.95 less 10% disconnect the batteries from the regulator and give you direct access to output 230 VAC 50 Hz the battery voltage.

PDC-207 150 W DC/AC Inverter input 24 VDC $49.95 less 10% Dimensions output 230VAC 50Hz • Maximum supply current: 200 mA • Default output voltage: 5 V PDC-210 300 W DC/AC Inverter input 12 VDC $74.95 less 10% • Lead length: 114 mm output 230 VAC 50Hz • Cells: 2 • Cell type: AAA/AA PDC-212 300 W DC/AC inverter input 24 VDC $74.95 less 10% output 230 VAC 50Hz

PDC-215 600 W DC/AC inverter input 12 VDC $154.95 less 10% Price Each 1 5+ output 230 VAC 50 Hz POL-783 VPack5.0 V 2-AAA battery holder w/5 V $18.50 less 10% PDC-217 600 W DC/AC inverter input 24 VDC $154.95 less 10% regulator output 230 VAC 50Hz POL-781 VPack5.0 V 2-AA battery holder w/5 V $18.50 less 10% PDC-220 1000 W DC/AC inverter input 12 VDC $309.95 less 10% regulator output 230 VAC 50Hz

PDC-222 1000 W DC/AC Inverter input 24 VDC $309.95 less 10% output 230 VAC 50Hz Security

True Sine Wave Inverters S110 GSM Wireless Home Alarm Kit This 200 to 400 W True sine wave DC/AC Inverter has been designed for The S110 is a home or office alarm system with GSM functions. The kit easy use in cars. Application : Home appliance, power tools, office and includes wireless sensors and two keyfob remotes as well as a 12 VDC portable equipment, vehicle and yacht ...etc. They have a 3 years war- @50 mA adapter power supply. ranty. Features: Features: • Simple control of garage doors and entry gates • 24 VDC input • No call charges. The controller checks the called ID against a list of authorised numbers and acti- • Front panel indicator for operation status vates the output on the first ring without "picking • Power ON-OFF switch up" the call • Battery low alarm • Uses the GSM network and can be operated from • Over voltage, over temperature, output short anywhere with mobile phone coverage and overload protection • Configurable via SMS. Settings can be changed • Input reverse polarity Protection and authorised numbers added or removed with simple SMS com- • High surge power up to 800 W mands • High efficiency up to 88% • 8 wired and 16 wireless zones • Fanless design, cooling by free air convention • Up to 64 authorised phone numbers can be configured • Two digital inputs for door sensors or motion sensors to protect your door and windows Price Each 1 5+ • Siren or Strobe output and SMS alert function for notification of door PDC-240 200 W DC/AC inverter input 12 VDC $269.95 less 10% opening or movement not triggered by an authorised call output 230 VAC 50Hz

PDC-242 200 W DC/AC inverter input 24 VDC $269.95 less 10% Price Each 1 5+ output 230 VAC 50Hz KPR-100 S110 GSM Wireless Home alarm kit $249.00 less 10% PDC-245 400 W DC/AC inverter input 12 VDC $284.95 less 10% output 230 VAC 50Hz KPR-101 2 Button Remore Control $9.95 less 10%

PDC-247 400 W DC/AC inverter input 24 VDC $284.95 less 10% KPR-102 Wireless PIR Motion sensor $19.95 less 10% output 230 VAC 50Hz KPR-103 Wireless Door magnetic sensor $9.95 less 10%

Ocean Controls Catalogue 2012 Page 89 OCEANSECURITY CONTROLS

Wired PIR Motion Sensor Wired Photoelectric Smoke and Heat Detector The PIR-02 PIR motion detector is designed to provide detection of crimi- The Wired Smoke Detector is used for fire detection which is triggered by nal intrusion through a door or window frame by sensing infrared energy smoke and heat. The SM-04 is photoelectric type. It can (heat) emitting from an intruder’s body. Upon detection of intrusion, the be used independently or as a front-end detector of an PIR-02 automatically generates an alarm signal to control panel. The alarm system. sensor also provides a tamper contact output. The unit has RF and EMI Immunity to interference produced by radio devices. The unit is wall- Upon detection of smoke and heat, the SM-04 automati- mounted by means of a bracket. cally generates an alarm signal to control panel and Led indication alarm. The unit has RF and EMI Immunity to Features: interference produced by radio device. • Operating Voltage: DC9V~16V • Detection Range: Vertical angle 60degree, Horizontal angle 110 de- Features gree, 12m Newly-developed dual element passive infrared sensor unit • Newly-developed photoelectric Smoke & Heat sensor unit inside; • Wired transmitting digital signal to control panel; • Independently or as a front-end detector of an alarm system; • Intelligent logic control eliminates false alarms; • Wired transmitting digital signal to control panel; • Microcontroller temperature analysis and Automatic • Intelligent logic control, eliminate false alarm; temperature compensation for best summertime • Microcontroller temperature analysis and Automatic temperature com- detection; pensation for best summertime detection; • Tightly-mated bug guard to protect the sensor • Tightly-mated bug guard to protect the sensor optics from insects, optics from insects, spiders and dust; spiders and dust, • High immunity to white light; • Strong adaptability to circumstance requirements; • Selectable detection sensitivity (standard/high) for • SMT adopted, RF and EMI Immunity; different environmental requirements; • Manual test, auto-reset, and low power consumption; • SMT adopted, RF and EMI Immunity; • Thin structure design; • Adjustable detecting distance. • Alarm output contacts of relay: N.C./ N.O. optional. • Alarm output contacts of relay: N.C./ N.O. optional.

Price Each 1 5+ Price Each 1 5+ KPR-106 Wired Photoelectric smoke and heat $17.95 less 10% KPR-104 Wired PIR motion sensor $15.95 less 10% detector

Wired Pet Immunity PIR Motion Sensor Wired Ceiling PIR Motion Sensor The PIR-04 wired PIR motion detector is designed to provide detection The CPIR-03 PIR motion detector is designed to provide detection of crimi- of criminal intrusion through doors and windows into a protected area by nal intrusion into a room by sensing infrared energy sensing the infrared energy (heat) emitting from an intruder’s body mov- (heat) emitting from an intruder’s body. ing through the protected area The sensor is commonly referred to as a PIR, which The MOTION SENSOR is commonly referred to as a PIR, stands for passive Infrared. Upon detection of intru- which stands for passive Infrared. Upon detection of in- sion, the PIR-02 automatically generates an alarm sig- trusion, the PIR-100B automatically generates an alarm nal to control panel. The sensor also provides a tamper signal to control panel. contact output. The unit has RF and EMI Immunity to interference produced by radio devices. The unit is A special PET IMMUNE MOTION SENSOR is utilized to mounted on the celing. know the difference between an intruder and a pet.

Features Features • Newly-developed dual element passive infrared sensor unit; • Newly-developed dual element passive infrared sensor unit; • Wired transmitting digital signal to control panel; • Wired transmitting digital signal to control panel; • Intelligent logic control eliminates false alarms; • Intelligent logic control eliminates false alarms; • Microcontroller temperature analysis and Automatic temperature com- • Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection; pensation for best summertime detection; • Tightly-mated bug guard to protect the sensor optics from insects, • Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust; spiders and dust; • High immunity to white light; • Selectable detection sensitivity (standard/high) for different environ- • Selectable detection sensitivity (standard/high) for different environmental requirements; mental requirements; • SMT adopted, RF and EMI Immunity; • SMT adopted, RF and EMI Immunity; • Adjustable detecting distance; • Adjustable detecting distance; • Alarm output contacts of relay: N.C./ N.O. optional. • Alarm output contacts of relay: N.C./ N.O. optional. Price Each 1 5+ Price Each 1 5+ KPR-107 Wired Ceiling PIR motion sensor $15.95 less 10% KPR-105 Wired PET Immunity PIR motion sensor $27.95 less 10% PIR Detector Wired Strobe Siren Easy to install PIR with dual look down detection. Features excellent tem- The Strobe Siren provides a bright, flashing light and loud sound to indi- perature compensation and selectable pulse count. Its stylish countoured cate an alarm situation. The unit is mounted on the shape virtually disappears once installed into the corner of any room. exterior of the premises to help attract attention to Vertical range is adjustable and a high quality noise reduction circuit en- the location of the alarm sures reliable detection. Superior RFI/EMI immunity. Specifications: Specifications: • Working Voltage: 9 VDC • Power supply: 9 to 16 V • Sound Volume: 110 dB at 3 metres • Current drain: NO 8 mA @12 VDC • Alarm period: 1.5 to 2.5 sec • Alarm output: NC/NO, 30 VDC, 0.2 A • Pulse 4 count: 2/3 selectable • RFI immunity: 25 V/m average • Tamper: NC, open trigger

Price Each 1 5+ Price Each 1 5+

KPR-108 Wired strobe siren $14.95 less 10% PIR-005 PIR motion detector $31.32 less 10%

PIR-006 Swivel bracket $5.18 less 10%

Page 90 Ocean Controls Catalogue 2012 OCEANSECURITY CONTROLS

Wired Door Magnetic Reed Switch RFID Keypad Access Controller The magnetic reed switch is usually installed in exterior opening doors This door access controller keypad is designed for door and windows. The contacts operate on the principle that when the door or strike and other access control applications in home or window moves more than 1.25 cm from the frame, the magnetic field on business security installations. the switch is removed and this breaks the alarm circuit (or zone) which trips off the system. The use of RFID tags allows easy movement for authorised users in and out of the building or secure area. Once tripped, the alarm signal cannot be stopped by just closing the door It allows 3 methods of entry, by use of keypad only, or window. Magnetic contacts are popular and widely used because they proximity card only or keypad PLUS proximity card detect an intruder before he enters the protected premises. combined. Specifications: The three inbuilt relays allow control of a door strike at • Working Voltage: 12 VDC the entry point in addition to 2 independent relays for • Static Current(uA): 3 security system triggering and duress alarm. • Size: 71 x 36 x 15 mm • Weight: 0.05 kg Price Each 1 5+

SEC-003 RFID keypad access controller $117.27 less 10%

SEC-005 Key Fob RFID Tag $9.15 less 10%

Price Each 1 5+ RFID Weatherproof Door / Alarm Control Keypad KPR-109 Wired Door magnetic reed switch $4.95 less 10% This RFID door access controller is designed for controlling a door strike in home or business security installations. Each user can be assigned an RFID key card which is used to activate the door locking mechanism. For Wired Garage Door Magnetic Contact additional security it may also be configured to require a 4 digit code to be The magnetic reed switch is usually installed in exterior opening doors entered on the keypad. and windows. The contacts operate on the principle that when the door or Up to 500 users can be added to a system It features 2 x 3 A NC/NO relay window moves more that 1.25 cm from the frame, the magnetic field on contacts for door strike connection, plus alarm the switch is removed and this breaks the alarm circuit (or zone) which triggering. An auxiliary 1 A relay output is provided trips off the system. for doorbells. Operates with fail-safe or failsecure Once tripped, the alarm signal cannot be stopped by just closing the door strikes. door or window. Magnetic contacts are popular and widely used because Features: they detect an intruder before he enters the • Weatherproof design & construction protected premises. • Tamper switch Specifications: • Keypad lock after multiple false entries • Working Voltage: 12 VDC • Single or multi user 4 digit entry codes • Static Current(uA): 3 • Door forced/left open alarm output • Size: 71 x 36 x 15 mm • 12 VDC operation • Weight: 0.20 kg • Dimensions 129H x 84W x 41D mm

Price Each 1 5+

SEC-002 RFID weatherproof door/ alarm control $82.59 less 10% keyp[ad Price Each 1 5+ SEC-005 Key Fob RFID Tag $9.15 less 10% KPR-110 Wired Garage Door magnetic contact $14.95 less 10%

Key Fob RFID Tag Weatherproof Door / Alarm Control Keypad This Key fob with RFID tag is compatible with either the RFID Keypad Ac- This door access controller keypad is designed for door strike and other cess Controller (SEC-002) or the RFID Weatherproof Door/Alarm Keypad access control applications in home or business security installations. Controller (SEC-003). It can be purchased as an additional/replacement It features 3 outputs; 5 A NC/NO for door strike and 2 x 1 A outputs for item to your existing keypad controllers. alarm triggering or auxiliary security functions. It can be installed so that Features: each user can enter their own 4 digit pin number (up to 9999 users) or • 64 bit code alternatively user groups can be assigned allowing up to 100 million pos- • Resonance Frequency 125 kHz sible entry codes. • Operating Temperature: -15 ~ 55 deg. C Features: • Tamper switch • 5 A 30 VDC output for doorstrike • 2 x 1A 30 VDC outputs for alarm triggering • Single or multi user 4 digit entry codes • Panic/duress output • Operation voltage 12 VAC/DC • Dimensions 129H x 84W x 41D mm Price Each 1 5+

SEC-005 Key Fob RFID Tag $9.15 less 10%

Price Each 1 5+ Radio Frequency Idendification uses radio- SEC-001 Weatherproof Door/ Alarm control keypad $57.23 less 10% frequency to transfer data wirelessly from a tag attched to an object. In 1983, Charles Walton was granted the first patent to be associated with the ab- brevation RFID.

Ocean Controls Catalogue 2012 Page 91 OCEANSENSORS CONTROLS

RFID Starter Kit RFID Glass Capsule 125 kHz The RFID USB Reader is a simple to use, USB to serial base unit for the This is a glass, cylindrical RFID tag; each tag comes with ID-2, ID-12, and ID-20 readers. Simply plug a reader into the headers a unique 32-bit ID code and is not reprogrammable. The and attach a miniUSB cable. carrier frequency of this tag is 125 kHz, so it works great with our ID-2, ID-12 and ID-20 RFID readers. We tested Open a terminal program of your choice at 9600 bps 8N1, then scan your this RFID tag with one of our ID-12 readers and meas- 125 kHz ID tag and the unique 32-bit ID will be shown on the screen. The ured a maximum read distance of about 10mm. EM4001 unit is based on a FTDI chip and comes with a read LED and buzzer. ISO based RFID IC with Manchester encoding The ID-12 is a very simple RFID reader module. It plugs directly into the USB reader to allow you to Price Each 1 read RFID tags through a USB connection. Power the module, hold up a card, and get a serial string SFR-107 RFID glass capsule 125 kHz $4.75 output containing the unique ID of the card. Kit includes: Weather Proof 100 dB Siren / Strobe • 1× - RFID USB Reader • 1× - ID-12 RFID Module Combined siren and strobe in a single weather resistant housing. • 2× - RFID Card - 125 kHz Separate input for siren and strobe. It requires 10 to 14 VDC power supply with SPL output of 100 dB @ 50 cm. It has a flashing rate of 75 per minutes Price Each 1 5+ Black wire - common SFR-104 RFID starter kit $49.00 less 10% White wire - siren Blue wire - strobe RFID USB Reader RFID Reader Price Each 1 5+

The RFID USB Reader is a simple to use, USB to serial SEC-004 Weather proof 100 dB Siren/strobe $29.23 less 10% base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps Barcode Scanner 8N1, then scan your 125kHz ID tag and the unique 32- This is a super easy to use laser Bar Code Scanner. bit ID will be shown on the screen. The unit is based on Simply plug the device into USB and it enumerates as a FTDI chip and comes with a read LED and buzzer. RFID a Human Interface Device (HID) - basically it acts like reader not provided with the product. a keyboard. Open a text editor, scan a bar code, and the serial number of the bar code will be displayed as Features: regular visible text. Very accurate, surprisingly easy to • 5 V supply use! Comes with a manual of bar codes that configure • EM4001 64-bit RFID tag compatible, 9600bps TTL and RS-232 output the unit. No drivers needed. • Magnetic stripe emulation output • Read Range:100 mm (SFR-102) / 200 mm (SFR- Price Each 1 5+ 103) SFP-200 Barcode scanner $119.95 less 10% Price Each 1 5+ SFR-100 RFID USB reader $29.00 less 10% Sensors SFR-101 RFID Reader ID-2 $25.95 less 10%

SFR-102 RFID Reader ID-12 $35.00 less 10% Temperature and Humidity Transmitter Wall/Duct Mount

SFR-103 RFID Reader ID -20 $42.00 less 10% The Relative Humidity and Temperature Transmitters RHT-DM are stable sensors whose information is converted to linear 4 to 20 mA. Using the digital communication interface TxConfig (see SIG-008), the transmitter RFID Tag 125 kHz with Sparkfun Logo parameters can be configured to tailor a particular application. The RHT- WM model is intended for wall mounting. The RHT-DM comes with a probe This is a basic RFID tag used for presence sensing, etc. Works in the tip for duct mounting. 125 kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable. Card is blank on one side, smooth, and Specifications: mildly flexible. • Loop powered 4 to 20 mA outputs. • Power supply: 12 to 30 Vdc Features: -- Channel isolation: the 4 to 20 mA outputs are isolated from each • EM4001 ISO based RFID IC other • 2 kbps ASK -- Reverse polarity protection: YES. • Manchester encoding -- Cable entrance: compress fitting PG7. • 64-bit data stream [Header+ID+Data+Parity] • Operating limits: -- Sensor and probe (RHT-DM): -20 to 80 °C, 0 to 100% RH. Price Each 1 5+ -- Electronic circuit: -10 to +65 °C, 0 to 95% RH. • RH channel: SFR-105 RFID Tag 125 kHz with sparkfun logo $2.00 less 10% -- Accuracy: ±1.5% RH @ 25 °C, from 20 to 80% RH. - Repeatability: ±1% RH. RFID Button 125 kHz 16 mm - -- Hysteresis: ±1% RH. This is a simple, thumbnail-size RFID tag. These tags are great for sens- • Temperature channel: ing presence, identification, etc., and they're small, so they can be easily -- Accuracy: ±0,5 °C @ 25 °C. sewn into clothing or inserted into enclosures. Each tag comes with a -- Maximum ±2 °C from -40 to 80 °C. unique 32-bit ID code and is not reprogrammable. The -- Repeatability: ±0.1°C. carrier frequency of this tag is 125 kHz, so it works great -- Adjustable Span: between -40 & 120°C. with our ID-2, ID-12 and ID-20 RFID readers. We tested this RFID tag with one of our ID-12 readers and measured a maximum read distance of about 32 mm. Price Each 1 5+ Features: RHT-003 Wall Mount, Temp & Humidity sensor 4 to $209.00 less 10% • EM4001 ISO based RFID IC 20 mA out • Manchester encoding RHT-004 Duct Mount, RHT sensor 4 to 20 mA, 150 $225.00 less 10% mm Probe Price Each 1 5+ RHT-005 Duct Mount, RHT sensor 4 to 20 mA, 250 $225.00 les 10% SFR-106 RFID button 125 kHz 16 mm $3.75 less 10% mm probe

Page 92 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

RHT Duct/Wall Temp & Humidity Sensors 0 to 10 V RHT-XS Temp & Humidity Transmitter with Remote Sensor, output 4 to 20 mA or 0 to 10 V The Relative Humidity and Temperature Transmitters RHT-WM and RHT- The relative humidity and temperature transmitters RHT-XS, RHT-WM DM are microprocessed based instruments that incorporate high accurate and RHT-DM are microprocessor based instruments that incorporate high and stable sensors whose information is converted to linear 0 to 10V. accuracy and stable sensors. They feature two linear 4 to 20 mA outputs. Using the digital communication interface TxConfig (SIG-008), the trans- Using the digital communication interface TxConfig (see SIG-008), the mitter parameters can be configured to tailor a particular application. The transmitter parameters can be configured to tailor a particular application. RHT-XS can be wall mounted and comes with the The RHT-WM model is intended for wall mounting. The RHT-DM comes sensor on a 1.5 m cable. with a probe tip for duct mounting. Features: Specifications: • 4 to 20 mA / 0 to 10 V outputs • 0 to 10 V outputs. • 18 to 30 VDC -- Power supply: 12 to 30 Vdc • Cable entrance: compress fitting PG7. -- Channel isolation: The 4 to 20 mA outputs are isolated from each • -10 to +65 °C, 0 to 100% RH. other. -- Reverse polarity protection: YES. -- Cable entrance: compress fitting PG7. • Operating limits: Price Each 1 5+ -- Sensor and probe (RHT-DM): -20 to 80 °C, 0 to 100% RH. RHT-040 RHT-XS Temp & Humidity Transmitter with $259.00 less 10% -- Electronic circuit: -10 to +65 °C, 0 to 95% RH. remote sensor 4 to 20 mA output • RH channel: -- Accuracy: ±1.5% RH @ 25 °C, from 20 to RHT-045 RHT-XS Temp & Humidity Transmitter with $249.00 less 10% 80% RH. remote sensor 0 to 10 V output -- Repeatability: ±1% RH. -- Hysteresis: ±1% RH. -- Span: any value between 0 and 100% RH or RHT-P10 Temp & Humidity Transmitter with Sealed –40 to 100 °C for dew point. Remote Sensor 4 to 20 mA or 0 to 10 V • Temperature channel: -- Accuracy: ±0,5 °C @ 25 °C. Maximum ±2 °C The RHT-P10 transmitter can be wall mounted and comes with the sensor from -40 to 80 °C on a 1.5 m cable. The sensor has a ½" NPT thread and can withstand up -- Repeatability: ±0.1 °C to 145 PSI. The sensor comes with two interchangeable tips: a slotted -- Adjustable Span: between -40 and 120 °C. polymide tip (fastest response, least protection) and a high density poly- ethylene tip (slower response, particulate protection).

Price Each 1 5+ Features: • Dual, isolated 4 to 20 mA/ 0 to 10 V outputs RHT-006 Wall Mount, Temperature and Humidity $209.00 less 10% • 12 to 30 VDC Loop powered sensor 0 to 10 V output • Programmable ranges for both outputs • Internal reverse polarity protection RHT-008 RHT-DM Duct Mount, Temp & Humidity $225.00 less 10% Sensors 0 to 10 V, 150 mm long • Transmitter rated to IP65, sensor rated to IP40 RHT-009 RHT-DM Duct, Temp & Humidity sensors 0 $225.00 less 10% • Sensor has ½" NPT thread and can withstand to 10 V, 250 mm long up to 145 PSI • Cable entrance: compress fitting PG7.

Relative Humidity and Temperature Modbus Transmitters Price Each 1 5+

The RHT-WM-485-LCD (Wall Mount) and RHT-DM-485-LCD (Duct Mount) RHT-050 RHT-P10 Temp and Humidity Transmitter $269.00 less 10% transmitters include high precision and stability sensors for measuring with sealed remote sensor 4 to 20 mA temperature and relative humidity. They are microprocessor devices and, RHT-055 RHT-P10 Temp and Humidity Transmitter $259.00 less 10% therefore, allow configuration through a RS-485 interface, using the Mod- with sealed remote sensor 0 to 10V bus RTU commands. The DigiConfig software allows the configuration of all transmitter features as well as its diagnostic procedure. 4 to 20 mA Humidity Probe Specifications • Operating temperature of the transmitter: From 0 °C to 70 °C The RHB humidity probe from Comeco measures relative humidity of air • Electromagnetic compatibility: EM 61326:2000 and non-aggressive gases at atmospheric pressure, and transforms it into • Sensor measuring range standard 4 to 20 mA, 2-wire signal. -- Temperature: –40.0 °C to 100.0 °C -- Relative Humidity (RH): 0.0 to 100.0% RH (No Condensing) Main features of the RHB transducer are the very -- Dew Point: –40.0 °C and 100.0 °C fast response time and the short recovery time, • Measuring resolution which allows better control system parameters, -- Temperature: 0.1 °C. 14 bits (16383 levels as well as the reduced accuracy influence of the -- Relative Humidity (RH): 0.1%. 12 bits (4095 levels) mounting capacitances. • Response time The probe has a cable outlet and can be equipped - Temperature: up to 30s in slow air movement - with a stainless steel sintered filter for sensor protection. It is recom- -- Humidity: up to 8s in smooth air movement (20 to 80% RH) mended in high humidity situations (>90%) the Sintered Filter option be • Sampling interval: 3 seconds used. • Power supply: 12 Vdc to 30 Vdc • Protection class: Electronic module case: IP65; Sensor capsule: IP40 Even with a sintered filter, if RHB probes are operated over long periods of time (weeks) at 99% RH with condensation, the customer must take care to remove the filter and to dry the sensor occasionally. If this is unacceptable then it will be necessary to use the “DRY-WET BULB” method.

Price Each 1 5+

Price Each 1 5+ CMS-100 4 to 20 mA Humidity Probe $119.95 less 10%

RHT-010 Wall Mount, Modbus RHT transmitter wall $225.00 less 10% CMS-101 4 to 20 mA Humidity Probe with Sintered $149.95 less 10% mount filtering

RHT-011 Duct Mount, Modbus RHT transmitter, $239.00 less 10% 150 mm

RHT-012 Duct Mount, Modbus RHT transmitter, $239.00 less 10% 250 mm

Ocean Controls Catalogue 2012 Page 93 OCEANSENSORS CONTROLS

Wet/Dry-Thermometer Probe RHU Dust Cover for Novus Temp & Humidity RHU is designed to measure relative humidity in air and other gases These Sintered Bronze and Polypropylene dust covers replace the stand- and gas mixtures utilizing the well-known method of "dry" and "wet" ard slotted polyamide tip covers on our temperature and humidity sen- thermometers with 2 identical RTD platinum sensors class 'A' mounted in sors. They protect the sensing element from dust and other solid particles. stainless steel sheaths incorporated in a special stainless steel case, which can be installed inside or outside drying or moistening chambers. Note that the protective tip will slightly slow the sensor response to Specifications: changes in temperature or humidity. • Conversion range: 0...100% RH Check the datasheet for details on • Medium temperature input: each type. -- outside mounting: 50...200 °C - inside mounting: 20...120 °C - Price Each 1 5+ • Measurement accuracy: 1% RH • Response time: 2 s RHT-030 Sintered Bronze dust cover $10.00 less 10%

RHT-031 Polypropylene dust cover $10.00 less 10%

Price Each 1 5+ Replacement Sensor for Novus Temp & Humidity Sensors CMS-121 Wet/Dry-Thermometer Probe RHU $299.95 less 10% Replacement Temperature and Humidity Sensor for RHT-WM (Wall Mount), RHT-DM (Duct Mount), Temperature Transmitter Duct/Wall Mount , 4 to 20 mA Temp-WM (Wall Mount and Temp-DM (Duct Mount) Transmitters. The Relative Humidity and Temperature Transmitters Temp-DM are microprocessed based instruments that incorporate high accurate and stable The unit is also useful for experimenters as it can be sensors whose information is converted to linear 4 to 20 mA. The trans- used as a breakout board for the Sensirion SHT15 mitter parameters can be configured to tailor a particular application. humidity and temperature sensor. Specifications: • Temperature: Accuracy: 0,5 °C @ 25 °C Price Each 1 5+ -- Repeatibility: ±0.1 °C. -- Range: programmable between -50 and 120 °C RHT-032 Replacement sensor for RHT-WM Probes $55.00 less 10% (please check operational limits). -- Response Time: up to 30 s in fairly still air. RHT-033 Replacement sensor for Temp-WM Probes $39.00 less 10% • Power: -- 12 to 30 Vdc (model 4 to 20 mA) -- 18 to 30 Vdc (model 0 to 10 V). 4 to 20 mA Outdoor RTD Temperature • Output: Comeco's TSOP outdoor temperature sensors measure temperature by -- Two-wire loop powered 4 to 20 mA or 20 to 4 mA means of a Pt100 sensitive element mounted in a thin stainless steel stem -- Voltage output: 0 to 10 Vdc or 10 to 0 Vdc (optional). • Operational limits: for fast response. The -20 to 60 ºC temperature range is converted to -- Electronic module(WM-DM): -20 to +65 °C, 0 to 95% RH; standard 4 to 20 mA, 2-wire signal. -- Sensor and Probe (DM): -40 to +100 °C. The sensor electronics are enclosed in a freely Note: When measuring temperatures higher than +65 °C or lower mountable robust aluminium enclosure with than -20 °C, only 50% of the probe total length must be inserted IP66 protection class. A PG7 cable gland allows into the measured environment. for cable entry. The sensor element is enclosed in a ø4 mm stainless stell stem that extends 20 mm from the sensor body. Price Each 1 5+

RHT-020 TEMP-WM temperature sensor, 4 to 20 $135.00 less 10% mA output

RHT-022 TEMP-DM Duct temp sensor, 4 to 20 mA $155.00 less 10% 150 mm Price Each 1 5+

RHT-024 TEMP-DM duct temp sensor, 4 to 20 mA $159.00 less 10% CMS-050 4-20 mA Outdoor Temperature $149.95 less 10% 250 mm Loop Powered Temperature Sensor Temp-DM Duct Mount Temperature Sensors 0 to 10 V This is a simple 4 to 20mA output loop powered temperature sensor with The Novus TEMP-DM transmitter series incorporate the best high accuracy measurement range from -10°C to +125°C designed for monitoring RTU and great stability temperature sensors. They convert the measured val- and PLC cabinet temperatures, based on the Microchip TC1047A tempera- ues into linear 0 to 10 VDC signals. ture sensor IC and Texas Instruments XTR117 current transmitter IC. Specifications: Features: • Temperature: • Typical Accuracy of ± 0.5 °C -- Accuracy: 0,5 °C @ 25 °C. • DIN Rail Mounting Option -- Repeatibility: ±0.1 °C. • Ideal for measuring cabinet temperature for RTUs and PLCs -- Range: programmable between -50 and 120 • Up to 40V Loop Voltage °C (please check operational limits). • 8.1V Compliance Voltage -- Response Time: up to 30 s in fairly still air. • Operational limits: -- Electronic module(WM-DM): -20 to +65 °C, 0 to 95% RH; -- Sensor and Probe (DM): -40 to +100 °C. Note: When measuring temperatures higher than +65 °C or lower than -20 °C, only 50% of the probe total length must be inserted into the measured environment.

Price Each 1 5+

RHT-021 TEMP-WM temperature sensor, 0 to 10 V $135.00 less 10% output Price Each 1 5+

RHT-026 Temp-DM Duct Temperature Sensors, 0 to $155.00 less 10% KTA-267 Loop Powered Temperature Sensor $44.95 less 10% 10 VDC, 150 mm long KTD-267 Loop Powered Temperature Sensor with $49.95 less 10% RHT-028 Temp-DM Duct Temperature Sensors, 0 to $159.00 less 10% DIN Rail mount 10 VDC, 250 mm long

Page 94 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Waterproof DS18S20 Digital Temperature Sensor T/C Temperature Sensor The sensor is equipped with a DS18S20 1-Wire temperature sensor em- We now carry a range of thermocouple sensor that come with two op- bedded into the probe with a 15metre cable and RJ12 connector. In manu- tions; facturing the temperature probe a special process is used which ensures -- Straight Tube J/K thermocouple sensor (left photo) the internal sensor is thermally coupled to the tube wall, this helps ensure -- Straight Screw in Tube J/K thermocouple sensor (right photo) rapid thermal response to changing conditions. The straight tube J/K thermocouple sensor (CMS-010/CMS-011) is The DS18S20 digital converts the temperature at sensor for up to 12 bits mounted in a 50 mm long, 5 mm diameter stainless steel probe. The 2 (9 bits primary temperature measurement plus an overflow counter) or wire glass lead is 1 m long and it has a temperature range reading from 0 0.0625 °C of resolution. It features an alarm function with non-volatile to 400 °C. The straight screw in J/K thermocouple sensor (CMS-020/CMS- user-programmable upper and lower trigger points. Each sensor has a 021) is mounted in a 20 mm long, 5 mm diameter stainless steel probe unique serial number and multiple sensors can share a single bus. The with a standard 1/4" NPT thread. All of the sensor has a 2 wire glass lead DS18S20 communicates over a 1-Wire® bus that by definition requires that is 1 m long and it has a temperature range reading from 0 to 400 °C. only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55 °C to +125 °C and is accurate to ±0.5 °C over the range of -10 °C to +85 °C. In addition, the DS18S20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply.

Price Each 1 5+

CMS-010 Straight Tube J T/C temperature sensor $49.95 less 10%

CMS-011 Straight Tube K T/C temperature sensor $49.95 less 10%

CMS-020 Straight screw in J T/C temperature $59.95 less 10% Price Each 1 5+ sensor GJS-001 Waterproof DS18S20 Digital Temperature $19.50 less 10% CMS-021 Straight screw in K T/C temperature $59.95 less 10% sensor sensor

DS18S20 Temperature Transducer in Enclosure RTD Temperature Probe We have mounted a DS18S20 on a PCB together with a RJ-12 socket The straight tube RTD is a K thermocouple sensor and is mounted in a which fits into a small plastic telephone socket enclo- 50 mm long, 5 mm diameter stainless steel probe. The 2 wire Glass lead sure. This allows you to easily mount the enclosure to is 1 m long. Temperature range is 0 to 400 ºC. The 3 wires PT100 RTD a wall or other surface. A 6 wire telephone cable can be Probe comes with screw fixing for surface temperature measurement. run from the KTA-001 to your controller or datalogger. The sensor itself is mounted in a 1 m long stainless steel probe; it has a temperature reading range of 0 to 200 ºC. Features: • Unique 1-Wire Interface Requires Only One Port Pin for Communication • Each Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM • Multidrop Capability Simplifies Distributed Temperature Sensing Ap- plications • Requires No External Components • Can Be Powered From Data Line. Power Supply Range is 3.0 V to Price Each 1 5+ 5.5 V CMS-001 Straight tube RTD temperature probe $49.95 less 10%

Price Each 1 5+ CMS-005 RTD Temperature Probe with screw fixing $54.95 less 10% KTA-001 DS18S20 Temperature Transducer in $17.50 less 10% enclosure RTD Sensor Head and Probe This RTS Sensor is manufactured with a K-Type Thermocouple Glass Braid Insulated 316 stainless steel probe, measuring 6 × 100/200/300 mm. The thread is 1/2 " BSP. The 36" high temperature Type-K Thermocouple with glass braid insulation. head is aluminium. Temperature range is -50 to 300° C. 2 m PVC cable fitted on NOS-015. Features: • Type-K Thermocouple (Ni-Cr) • 30 gauge stripped and prepped wires • Thermocouple range : -270 °C to +1372 °C (-454 °F to +2501 °F) Price Each 1 5+ • Glass braid insulation range : -73 °C to +482 °C (-100 °F to +900 °F) NOS-001 RTD sensor head and 100 mm probe $64.90 less 10% • Yellow wire is + and red wire is - NOS-005 RTD sensor head and 200 mm probe $68.20 less 10%

Price Each 1 5+ NOS-010 RTD sensor head and 300 mm probe $70.40 less 10%

SFS-004 K-Type Thermocouple gl;ass braid insu- $16.00 less 10% lated PVC Cable for RTD Sensor This RTD sensor is manufactured with a 316 stainless steel probe measur- K-Type Thermocouple Probe ing 6 × 100 mm. The thread is 1/2" BSP. A 2 m, 3 wire PVC cable is fitted. Temperature range is -50 to 100 °C This plug in Thermocouple Probe allows you to measure external temperature readings on DMMs. Will measure temperatures from below minus 50 °C to over 1200 °C. Actual range depends on the DMM it is used with. Suitable for use in gas and liquid, both with very good accuracy. -40 °C to 750 °C accuracy 2.5 °C or 0.75 °C of temperature.

Price Each 1 5+

Price Each 1 NOS-015 RTD sensor 316 SS 6 x 100 1/2BSP 2m $50.60 less 10% PVC cable MET-036 K Thermocouple Probe $14.50

Ocean Controls Catalogue 2012 Page 95 OCEANSENSORS CONTROLS

Thin Film RTD CRZ-2005 class A -50 to 500 °C TMP102 Digital Temperature Sensor Breakout A thin film RTD, CRZ-2005 Class A with a temperature range of This is a breakout board for the incredibly small TMP102 digital tempera- -50 to 500 °C. Dimension 18 mm long (body 5 mm length) ture sensor. The TMP102 is a digital sensor (I2C a.k.a. TWI), has a resolution of 0.0625 °C, and is accurate up to 0.5 °C. The sensor requires very low-current, and is loaded with features. Communication with the TMP102 is achieved through a two-wire serial interface. There is no on-board voltage regulator, so supplied voltage should be between 1.4 to 3.6 VDC. Filtering capacitors and pull-up resistors are Price Each 1 5+ included as shown. NOS-020 Thin film RTD CRZ-2005 class A -50 to $8.95 less 10% Features: 500°C • 12-bit, 0.0625 °C resolution • Accuracy: 0.5 °C (-25 °C to +85 °C) Ceramic Wire Wound RTD • Low quiescent current -- 10 µA Active (max) A ceramic wire wound RTD with a temperature range of -- 1 µA Shutdown (max) -200 to 600 °C. Dimension 32 mm long (wires 10 mm • Two-wire serial interface length) Price Each 1 5+

SFS-007 TMP102 Digital Temperature Sensor $6.00 less 10% Breakout Price Each 1 5+ NOS-025 Ceramic wire wound RTD $14.95 less 10% M12 Unshielded Capacitive Proximity switch Capacitive proximity sensors switch in the presence of metallic and non- DHT22 Temp and Humidity Sensor metallic objects. These sensors can detect almost any liquids and solids. A small control on the back of the sensor adjusts the triggering threshold. The DHT-22 is a low cost humidity and temperature sensor with a single These sensors take 10 to 30 V DC and have a normally open NPN/PNP- wire digital interface. The sensor is calibrated and doesn't require extra type output. components so you can get right to measuring relative humidity and temperature. The rear of the sensor has an LED indicator that lights when the sensor is triggered.The sensor has an 12 mm diameter threaded body, allowing Features: easy mounting and adjustment 4 mm sensing distance. The cable is 2 m • 3.3 to 6 V Input long. The M12 unshielded switch has 3 wires. They come with IP67 rating • 1 to 1.5 mA measuring current, 40 to 50 uA standby current and reverse polarity protection. • Humidity from 0 to 100% RH Specifications: • -40 to 80 degrees C temperature range • Voltage drop: ≤ 2.0 V • ±2% RH accuracy, ±0.5 °C • Rated insulation resistance: ≥ 20 MΩ • Load current capacity: 200 mA Price Each 1 5+ • Leakage current: ≤ 20 µA • Repeated accuracy: ≤ 5% SFS-005 DHT22 Temp and humidity sensor $12.50 less 10%

Price Each 1 5+ Humidity Sensor - HIH-4030 Breakout IBS-1120 M12 unshielded capacitive proximity sen- $49.00 less 10% The HIH-4030 measures relative humidity (%RH) and delivers it as an sor NPN output analog output voltage. You can connect the output of the sensor directly IBS-1121 M12 unshielded capactive proximity sen- $49.00 less 10% to an ADC on a microcontroller; and, thanks to the sensor's near linear sor PNP output voltage output, the data is very easy to process. Voltage applied to the supply pins should be within 4 to 5.8 VDC, and optimally at 5 V. The sensor will typically only consume about 200 μA. 18 Unshielded/Shielded Capacitive Proximity Sensor Features: Capacitive proximity sensors switch in the presence of metallic and non- • Near linear, analog output metallic objects. These sensors can detect almost any liquids and solids. • All pins broken out to a 0.1" pitch header A small control on the back of the sensor adjusts the triggering threshold. • Laser trimmed interchangeability These sensors require a power supply from 10 to 30 VDC. They have NPN/ • Enhanced accuracy, Fast response time PNP, NO/NC output style. They come with IP67 rating and reverse polarity • Stable, low drift performance protection The rear of the sensor has an LED indicator that lights up when the sensor Price Each 1 5+ is triggered. They have an 18 mm diameter threaded body, allowing easy SFS-006 Humidity sensor-HIH-4030 Breakout $16.00 less 10% mounting and adjustment. The M18 unshielded has 4 wires with a sensing distance of 8 mm. The M18 shielded has 3 wires with a sensing distance of 5 mm. They come with a 2 m long cable. Temperature and Humidity Sensor Breakout Specifications: This is a simple breakout board for the SHT15 humidity sensor from Sen- • Voltage drop: ≤2.0 V sirion. Board comes assembled and tested with the SHT15. • Rated insulation resistance: ≥20 MΩ • Load current capacity: 200 mA Features: • Leakage current: ≤20 µA • 2 factory calibrated sensors for relative humidity & temperature • Repeated accuracy: ≤5% • Digital 2-wire interface • Precise dewpoint calculation possible • Measurement range: 0 to 100% RH Price Each 1 5+ • Absolute RH accuracy: ± 2% RH (10...90%) • Repeatability RH: ± 0.1% RH IBS-1180 M18 Shielded Capacitive Sensor, NO+NC $49.00 less 10% • Temp. accuracy: ± 0.3°C @25 °C PNP output • Fast response time < 4 sec. IBS-1181 M18 Unshielded Capacitive Sensor $49.00 less 10% • Low power consumption (typ. 30 µW) NO+NC, PNP output

Price Each 1 5+ IBS-1182 M18 Shielded Capactive Sensor NPN $49.00 less 10% output SFS-001 STH15 Temperature and humidity sensor $49.00 less 10% IBS-1183 M18 Unshielded Capacitive Sensor NPN $49.00 less 10% breakout output

Page 96 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

M30 Unshielded/Shielded Capacitive Proximity Sensor MPR121 Capacitive Touch Sensor Breakout The M30 series switch in the presence of metallic and non-metallic This is a breakout board for Freescale's MPR121QR2. The MPR121 is a objects. At the back of the sensor there is a small control that allow the capacitive touch sensor controller driven by an I2C interface. The chip adjustment of the triggering threshold. can control up to twelve individual electrodes, as well as a simulated thir- teenth electrode. The MPR121 also features eight LED driving pins. When These sensors require a power supply range of 10 to 30 VDC. They have these pins are not configured as electrodes, they may NO+NC, NPN/PNP-output style. The rear of the sensor has an LED indica- be used to drive LEDs. tor that lights when the sensor is triggered. There is no regulation on the board, so the voltage It has a 30 mm diameter threaded body, allowing easy mounting and ad- supplied should be between 2.5 and 3.6 VDC. The VREG justment. The M30 unshielded has a sensing distance of 25 mm, whereas pin is connected through a 0.1 uF capacitor to ground, the M30 shielded has a sensing distance of 15 mm. It has an IP67 rating which means, unless you modify the board, you can't with ABS sensing face material. operate the MPR121 in low-supply voltage mode (1.71 Specifications: to 2.75 VDC). • Voltage drop: ≤2.0 V • Rated insulation resistance: ≥20 MΩ Price Each 1 5+ • Load current capacity: 200 mA • Off-state current: ≤10 mA SFS-003 MPR121 Capacative touch sensor brea- $12.50 less 10% • Leakage current: ≤20 µA kout • Protection: Reverse polarity • Repeated accuracy: ≤5% M5 Series Inductive Proximity Sensor The M5 shielded inductive sensors require a power supply range of 10 to Price Each 1 5+ 30 VDC. These sensors have a sensing distance of 1mm with a 2m long IBS-1300 M30 Shielded Capacitive Sensor PNP $59.00 less 10% cable. They have a 5 mm diameter threaded body, allowing easy mounting and adjustment. They come with IBS-1301 M30 Shielded Capacitive Sensor NPN $59.00 less 10% 3 wires and NO, NPN/PNP-style output. IBS-1302 M30 Unshielded Capacitive Sensor NPN $59.00 less 10% Inductive proximity sensors switch in the presense of IBS-1303 M30 Unshielded Capacitive Sensor PNP $59.00 less 10% iferrous metals. They come with IP67 protection, water resistant, proof of oil, water acid as well as over-current protection. They are housed in brass chrome plated. CPS-F36NOC15B F36 Capacitive Proximity Sensor F36 Unshileded capacitive series require power supply Price Each 1 5+ range from 10 to 30 VDC. They have NO+NC, NPN- IBS-0050 M5 Shielded Inductive Sensor, NO, PNP $29.00 less 10% style output with 4 wires. These sensors have a sensing distance of 13.5 mm with a mounting diameter of IBS-0051 M5 Shielded Inductive Sensor, NO, NPN $29.00 less 10% 15 mm and a 36 mm diameter threaded body. They come with an IP67 rating. M12 Proximity Inductive Sensor Switch 4 wire Shielded/ Unshielded Price Each 1 5+ M12 inductive sensor series require a power supply range from 10 to 30 IBS-1360 Proximity sensor capacitive NO+NC, NPN- $65.00 less 10% VDC. They have a 12 mm diameter threaded body, allowing easy mount- style output ing and adjustment. The M12 shielded sensor has a sensing range of 1.8 mm and the M12 unshielded sensor has a sensing range of 3.6 mm. They come with IP67 rating and CE approvals. CPS-S41NOC20B S41 Capacitive Proximity Sensor S41 Shielded capacitive series require power supply range from 10 to Features: 30 VDC. They switch in the presence of metal and non- • 4 wires, NO+NC, NPN/PNP-style output metal objects. They have NPN-style output with a sensing • Voltage drop: ≤ 2.0 V distance of 18 mm. They have 3 wires with a mounting • Leak current: ≤ 20 µA • Repeated accuracy: ≤5% diameter of 20 mm. They come with an IP67 rating as well as water resistant Price Each 1 5+ and over-current protection. Widely applied in measuring, Counting, Rpm measuring in mechanism, chemical, paper IBS-0120 M12 Shielded Inductive, NO+NC, NPN $24.95 less 10% manufacture light industry. Sensor

IBS-0121 M12 Shielded Inductive, NO+NC, PNP $24.95 less 10% Price Each 1 5+ Sensor

IBS-1410 Proximity sensor capacitive NO+NC, NPN- $59.00 less 10% IBS-0122 M12 Unshielded Inductive, NO+NC, NPN $24.95 less 10% style output Sensor

IBS-0123 M12 Unshielded Inductive, NO+NC, PNP $24.95 less 10% MPR121 Capacitive Touch Keypad Sensor The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple 'keypad' with an I2C output. The board also has four mounting holes allow- Shielded: Thread extends all the way to the ing it to be used as an input system in place of traditional sensor face, resulting in a narrower , more buttons. Check the example code below for an easy way to read the keypad. focused sensing field. Note: This keypad outputs 3.3 V logic. If you are using a board which only accepts 5 V logic, you will run into a problem. You will want to use a logic level converter, or a board Unshielded: Doesn't have a metal band which accepts 3.3 V logic. around the sensor face, resulting in a wider focused sensing field. Thus they are often Price Each 1 5+ preferred for longer sensing distance. SFS-400 MPR121 Capacitive touch keypad $19.95 less 10%

Ocean Controls Catalogue 2012 Page 97 OCEANSENSORS CONTROLS

M18 Unshielded, 3 Wire NPN Proximity Switch Inductive Inductive Proximity Switch

IPS Series M18 Proximity Sensor Inductive switch in the presence of met- This IPS series switch in the presence of ferrous metals. They require 10 als. This series of sensors require a supply voltage of 10 to 30 VDC. to 30 VDC power supply. They have 4 wires and both NO+NC, NPN-style output. On the side of the sensor there is an LED indica- The sensors have 3 wires with NO NPN-style output. They have a 18mm tor that lights up when the sensor is triggered. diameter threaded body, allowing easy mounting and adjusment. It has a There is an IP67 rating on this series as well as having sensing distance of 10 mm and come with a 2 m long cable. the over-current and short circuit protection. There is also a protectin against reverse polarity on this series. They come with IP67 protection as well as having the CE approval. The sensors are housed in niclke plated brass material. There Specifications IPS-F36NOC15B IPS-F54NOC36B IPS-F100NOC50B is a reverse polarity protection on this series of sensor, IBEST S36 IBEST F54 IBEST F100 as well as the short circuiting protection. At the rear of the sensor there is an LED indicator that lights up when Dimension 36 × 17.5 × 51.5 54 × 35 × 76.8 100 × 100 × 50 the sensor is triggered. mm mm mm

Specifications: Mounting dis- 15 mm 25 mm 50 mm tance • Leak current: <= 20 µA • Load capacity: <= 1 µF Detection dis- 15 mm 36 mm 50 mm • Repeated accuracy: <= 5% tance

Price Each 1 5+ Price Each 1 5+

IBS-0180 M18 Unshielded Inductive Sensor, NO NPN $25.00 less 10% IBS-0360 IPS-F36NOC15B Inductive Sensor, 15mm $39.00 less 10% sensing range

IBS-0540 IPS-F54NOC36B Inductive Sensor, 36mm $45.00 less 10% M18 Proximity Inductive Sensor Switch 4 wire Shielded/ sensing range Unshielded IBS-0100 IPS-F100NOC50B Inductive Sensor, $55.00 less 10% This M18 proximity inductive sensor series switch in the presence of met- 50mm sensing range als. These sensors require a supply voltage of 10 to 30 VDC. They have 4 wires with NO+NC NPN/PNP-style output. The M18 short body sensor has QL-1805/QL-1808 DC Square Proximity Switch a sensing range of 8 mm. The M18 long body has a sensing range of 5mm and 10 mm. This series of DC proximity switch has an 18 mm diameter square shaped body and is suitable for limit/speed applications. They come with IP67 rat- The sensors have a 18 mm diameter ing as well as having 3 wires connection. They are of NO, NPN/PNP-style threaded body, allowing easy mount- output. ing and adjustment and come with a 2 m long cable. There is an IP67 rating Specifications: on the sensors as well as having CE • Secure Sensing Range: approval. -- 0 to 4 mm (COS-0180/ 0181) -- 0 to 8 mm (COS-0182/ 0183) The sensors are housed in nickle plated brass material. Reverse polarity • Supply Voltage: 10 to 30 VDC protection is placed on this series of sensors as well as the short circuiting • Maximum Output Current: 150 mA protection. • Power Absorbed: < 10 mA

Price Each 1 5+ Price Each 1 5+ COS-0180 DC proximity switch QL-1805NA NPN $25.00 less 10% IBS-0181 M18 Shielded NPN Inductive Sensor, $27.50 less 10% 5 mm sensing range COS-0181 DC Proximity switch QL-1805PA PNP $25.00 less 10%

IBS-0182 M18 Shielded PNP Inductive Sensor, $27.50 less 10% COS-0182 DC Proximity Switch QL-1808NA NPN $25.00 less 10% 5 mm sensing range COS-0183 DC Proximity switch QL-1808NA PNP $25.00 less 10% IBS-0183 M18 Unshielded NPN Inductive Sensor, $27.50 less 10% 10 mm sensing range M8 Tubular Proximity Switch (Shielded/Unshielded) IBS-0184 M18 Unshielded PNP Inductive Sensor, $27.50 less 10% 10 mm sensing range M8 Tubular Shielded/Unshielded is suitable for limit/speed applications. They come with IP67 rating. These sensors have an 8 mm diameter IBS-0185 M18 Unshielded NPN Short Body Induc- $25.00 less 10% threaded body with 3 wires connection. tive Sensor, 8 mm sensing range Specifications: • Secure Sensing Range: IPS-S30NOC15B IBEST S30 Proximity Inductive Sensor -- 0-0.8 mm (Shielded) These sensors switch in the presence of ferrous metals. They have a -- 0-1.6 mm (Unshielded) power supply requirement between 10-30 VDC and have both NO+NC, • Supply Voltage: 10 to 30 VDC • Maximum Output Current: 150 mA NPN-style output. They have a 30 mm diameter threaded body, allowing • Power Absorbed < 10 mA easy mounting and adjustment, with 15mm sensing range. There is an IP67 rating on the sensors, plus the protection for over current and short circuiting. There is also a protec- Price Each 1 5+ tion against the polarity reversal. On the top surface of the COS-0080 M8 Shielded Tube Proximity Switch TS- $44.50 less 10% sensor there is an LED indicator that lights up when the 0801NA, NO NPN sensor is triggered. It is of rectangular shape with a mounting distance of 15 mm. COS-0081 M8 Shielded Tube Proximity Switch TS- $44.50 less 10% 0801NA, NO PNP

COS-0082 M8 Unshielded Tube Proximity switch TS- $44.50 less 10% Price Each 1 5+ 0802NA, NO NPN

IBS-0300 IPS-S30NOC15B Inductive Sensor, 15 mm $39.00 less 10% COS-0083 M8 Unshielded Tube Proximity switch TS- $44.50 less 10% sensing range 0820PA, NO PNP

Page 98 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

M12 Tubular Proximity Switch (Shielded/Unshielded) M30 Unshielded Analog Proximity Sensor, Current/Voltage M12 Tubular proximity switch has an 12 mm diameter threaded body with Output 3 wires connection. They have NO/NC, NPN/PNP-style output. The M12 The M30 analog sensors have a linear current/voltage, 4 to 20 mA or 0 shielded sensor has a sensing range of 2 mm. The M12 unshielded sensor to 10 V, output signal which changes in proportion to target distance from has a sensing range of 4 mm. the damping surface. The curve is linear over the entire working range. Specifications: These unshielded sensors switch in presence of metals with a sensing • Supply Voltage: 10 to 30 VDC distance of 15 mm. They have a power supply • Power Absorbed: < 10 mA requirement of 10 to 30 VDC with 3 wires con- • Maximum Output Current: 150 mA nection. • Operating Frequency: 1 KHz (Shielded)/ 600 Hz Specifications: (Unshielded) • Detect Status: Red LED Indicator • IP Rating(IES60529): IP67 • Housing Material: Nickle plated brass Price Each 1 5+

COS-0120 M12 Shielded Tube Proximity Switch TS- $39.00 less 10% Price Each 1 5+ 1202NA, NO NPN-style output IBS-2300 M30 Analog Sensor, 4 to 20 mA output $39.00 less 10% COS-0121 M12 Shielded Tube Proximity Switch TS- $39.00 less 10% 1202NA, NO PNP-style output IBS-2301 M30 Analog Sensor, 0 to 10 V output $39.00 less 10% COS-0122 M12 Unshielded Tube Proximity Switch $39.00 less 10% TS-1204NA, NO NPN-style output S40 Shielded Analog Proximity Sensor COS-0123 M12 Unshielded Tube Proximity Switch $39.00 less 10% TS-1204PA, NO PNP-style output S40 shielded analog sensor has a 40mm diameter body with a sensing range from 0.1 to 20 mm. The sensor will switch in presence of metal COS-0124 M12 Unshielded Tube proximity Switch $39.00 less 10% objects. They come with IP67 rating and has ABS housing material. TS-1204NB, NC NPN-style output Specifications: • Supply Voltage: 15 to 30 VDC M18 Tubular Proximity Switch • Output Current(I): 4 to 20 mA • Output Voltage(V): 0 to 10 V M18 tubular proximity switch has an 18 mm diameter threaded body. • Max.Fluctuant Voltage: <= 5% They have NO, NPN/PNP-style output. They come with IP67 rating and 3 • Detect Status: Red LED Indicator wires connection.

Specifications: Price Each 1 5+ • Supply Voltage: 10 to 30 VDC • Secure Sensing Range: IBS-2400 S40 Analog Sensor, 4 to 20 mA output $49.00 less 10% - 0 to 4 mm (COS-0184/0185) - IBS-2401 S40 Analog Sensor, 0 to 10 V output $49.00 less 10% -- 0 to 6.4 mm (COS-0186/0187) • Maximum Output Current: 150 mA • Operating Frequency 600 Hz (Shielded)/200 Hz (Unshielded) Hall Effect Sensors (Shielded) Hall effect sensors are available in two series, M12 Price Each 1 5+ and M18, both have NPN-style output. M12 series has a 12 mm diameter threaded body, allowing easy COS-0184 M18 Shielded Tube proximity switch TS- $39.00 less 10% mounting and adjusment. Whereas M18 has a 18 mm 1805NA NPN diameter threaded body. COS-0185 M18 Shielded Tube proximity switch TS- $39.00 less 10% 1805PA PNP They switch in the presence of magnetic objects. They have a detecting distance of 10 mm. They require 10 COS-0186 M18 Unshielded Tube proximity switch $39.00 less 10% to 30 VDC power supply, there's an LED indicator that lights up when the TS-1808NA NPN sensor has been triggered. They come with a 2m long cable as well as having a IP67 rating. COS-0187 M18 Unshielded Tube proximity switch $39.00 less 10% TS-1808PA PNP Price Each 1 5+

M30 Tubular Proximity Switch IBP-006 Hall sensor M12 NPN output $27.50 less 10%

M30 Tubular proximity switch has a 30 mm diameter threaded body. They IBP-007 Hall sensor M18 NPN output $29.50 less 10% have NO, NPN/PNP-style output. They come with IP67 rating and 3 wires connection. BPS Series Economic Pressure Sensors Specifications: • Supply Voltage Range: 10 to 30 VDC This BPS pressure sensor series are great economical pressure • Secure Sensing Range: sensors that come in robust packing, all laser-welded stainless -- 0 to 8 mm (COS-0300/0301) steel design. They take a wide measuring range from -1 up to -- 0 to 12 mm (COS-0302/0303) 250 Bar. Standard and custom options are available for OEM • Maximum Output Current : 150 mA design.Pressure Connection: 1/4" NPT • Operating Frequency: 400 Hz (Shielded)/ 100 Hz (Unshielded) Features: • Accuracy: ± 0.5% F.S. Price Each 1 5+ • Measuring range: -1 to 250 bar • Power supply: 8 to 30 VDC, Output: 4 to 20 mA COS-0300 M30 Shielded Tube proximity switch TS- $49.00 less 10% 3010NA NPN Price Each 1 5+ COS-0301 M30 Shielded Tube proximity switch TS- $49.00 less 10% 3010NA PNP ALT-100 BPS Pressure sensor input: -1 to 0 Bar $249.00 less 10%

COS-0302 M30 Unshielded Tube proximity switch $49.00 less 10% ALT-101 BPS Pressure sensor input: 0 to 1 Bar $229.00 less 10% TS-3015NA NPN ALT-106 BPS Pressure sensor input: 0 to 6 Bar $229.00 less 10% COS-0303 M30 Unshielded Tube proximity switch $49.00 less 10% ALT-110 BPS Pressure sensor input:0 to 10 Bar $229.00 less 10% TS-3015PA PNP ALT-125 BPS Pressure sensor input: 0 to 25 Bar $229.00 less 10%

ALT-140 BPS Pressure sensor input: 0 to 40 Bar $229.00 less 10%

ALT-200 BPS Pressure sensor input 0 to 100 Bar $229.00 less 10%

ALT-350 BPS Pressure sensor input: 0 to 250 Bar $229.00 less 10%

Ocean Controls Catalogue 2012 Page 99 OCEANSENSORS CONTROLS

Pressure Transmitter PR-3850 Pressure Sensors with Flush Diaphragm These are a great economical gauge pressure transmitter with a 4 to 20 The Ellison Sensors PR3850 series with a flush diaphragm pressure mA output (2 wire) and featuring an accuracy of 0.5% Full Scale. The transmitter is designed for demanding applications where the sensor mounts with a ¼" NPT thread. This particular series has a wide process media is unsuitable for direct contact with the transducer measurement range up to 250 BAR. Thick film strain guage on diaphragm (slurries etc). ceramic and stainless steel (SUS316) Features: Features: • All Stainless Steel Construction • Response time < 5 mSecs • ½” BSP Male Flush Diaphragm Process Connection • Supply range 10 to 30 VDC • ±0.3% Combined Error • 16 bit resolution DAC, 4 to 20 mA output • Industrial Standard 4 to 20 mA Output • Protection class NEMA4/IP65, CE EMC certification • Zero & Span Adjustment

Price Each 1 Price Each 1 5+ PRT-035 Elison PR3850 0 to 2.5 Bar (250KPa, 36PSI) $485.00 AXS-150 Pressure Transmitter 0 to 2 Bar $149.00 less 10% PRT-036 Ellison PR3850 0 to 4 Bar (400KPa, 58PSI) $485.00 AXS-153 Pressure Transmitter 0 to 6 Bar $149.00 less 10% PRT-037 Ellison PR3850 0 to 6 Bar (600KPa, 86PSI) $485.00 AXS-155 Pressure Transmitter 0 to 10 Bar $149.00 less 10% PRT-038 Ellison PR3850 0 to 10 Bar (1MPa, 147PSI) $485.00 AXS-157 Pressure Transmitter 0 to 25 Bar $149.00 less 10% PRT-039 Ellison PR3850 0 to 16 Bar (1.6MPa, 230PSI) $485.00 AXS-160 Pressure Transmitter 0 to 60 Bar $149.00 less 10% PRT-040 Ellison PR3850 0 to 25 Bar (2.5MPa, 360PSI) $485.00 AXS-162 Pressure Transmitter 0 to 100 Bar $149.00 less 10% PRT-041 Ellison PR3850 0 to 40 Bar (4MPa, 580PSI) $485.00 AXS-165 Pressure Transmitter 0 to 250 Bar $149.00 less 10% PRT-042 Ellison PR3850 0 to 60 Bar (6MPa, 860PSI) $485.00 PRT-043 Ellison PR3850 0 to 100 Bar (10MPa, 1470PSI) $485.00 GS-4200 Pressure Sensors PRT-044 Ellison PR3850 0 to 160 Bar (16MPa, 2300PSI) $485.00 The Ellison Sensors GS4200 series pressure transmitter is designed for demanding applications where high accuracy and high PRT-045 Ellison PR3850 0 to 250 Bar (25MPa, 3600PSI) $485.00 quality are required. PRT-046 Ellison PR3850 0 to 400 Bar (40MPa, 5800PSI) $485.00 The GS4200 offers outstanding performance due to a unique PRT-047 Ellison PR3850 0 to 600 Bar (60MPa, 8600PSI) $485.00 “Silicon On Sapphire” diaphragm construction giving excellent stability over a wide temperature range. Accuracy of ±0.25% PRT-048 Ellison PR3850 0 to 1000 Bar (100MPa) $485.00 with an over pressure limit of twice nominal pressure, together with an output of 4 to 20 mA, wide operating temp range –40 to PRT-049 Ellison PR3850 0 to 1500 Bar (150MPa) $485.00 +80 °C and adjustable zero & span for ease of calibration. All models are supplied with ¼" BSP thread process connection and a PM1000 Plug In Transducer Display large DIN43650 Plug for electrical connection. The titanium pressure ports and stainless steel body offer high level of corrosion resistance. IP65 The PM1000 Series is universal plug-on LED display suitable for use with rated. various transmitters having a 4 to 20 mA output and fitted with DIN43650 connector. The Plug in display simply fits between the plug and socket on any DIN43650 connector, it is supplied from the 4 Price Each 1 to 20 mA current loop signal of the transmitter. No additional power is required. The unit is user programmable from two PRT-001 Ellison GS4200 - 1 to 0 Bar Vacuum $459.00 buttons behind the front panel enabling scaling, decimal point position and adjustment of the set point position. The display PRT-002 Ellison GS4200 0 to 500 mBar (50KPa, 7.3PSI) $399.00 can be rotated through 90 degree steps for use in different PRT-003 Ellison GS4200 0 to 1 Bar (100KPa, 14.7PSI) $399.00 installation positions. The integral open-collector output on the PM1001 model allows the transmitter to be retrofitted easily PRT-004 Ellison GS4200 0 to 1.6 Bar (160KPa, 23PSI) $399.00 with a limit contact set point, for use as an alarm or controller. PRT-005 Ellison GS4200 0 to 2.5 Bar (250KPa, 36PSI) $399.00 Price Each 1 PRT-006 Ellison GS4200 0 to 4 Bar (400KPa, 58PSI) $399.00 PRT-050 3.5 digit LED plug-on display $299.00 PRT-007 Ellison GS4200 0 to 6 Bar (600KPa, 86PSI) $399.00 PRT-051 3.5 digit LED plug-on display with alarm point on $399.00 PRT-008 Ellison GS4200 0 to 10 Bar (1MPa, 147PSI) $399.00

PRT-009 Ellison GS4200 0 to 16 Bar (1.6MPa, 230PSI) $399.00 NP-430A/D Series Pressure Sensors PRT-010 Ellison GS4200 0 to 25 Bar (2.5MPa, 360PSI) $399.00 A great economical pressure sensor! The NP-430A/D series of pressure PRT-011 Ellison GS4200 0 to 40 Bar (4MPa, 580PSI) $399.00 transmitters have been developed for general industrial applications including refrigeration technology. It can be used with most general purpose PRT-012 Ellison GS4200 0 to 60 Bar (6MPa, 860PSI) $399.00 gases and liquids but is NOT compatible with ammonia. Response time: < PRT-013 Ellison GS4200 0 to 100 Bar (10MPa, 1470PSI) $399.00 10 ms (0 to 99%)

PRT-014 Ellison GS4200 0 to 160 Bar (16MPa, 2300PSI) $399.00 Features: • Signal output: two-wire , 4 to 20 mA PRT-015 Ellison GS4200 0 to 250 Bar (25MPa, 3600PSI) $399.00 • Pressure Range 0 to 2 Bar and 0 to 60 Bar PRT-016 Ellison GS4200 0 to 400 Bar (40MPa, 5800PSI) $399.00 • Power supply (V): 12 to 28 Vdc • Accuracy: better than 1% FS PRT-017 Ellison GS4200 0 to 600 Bar (60MPa, 8600PSI) $399.00 • Protection: IP67 • External thread ¼" NPT PRT-018 Ellison GS4200 0 to 1000 Bar (100MPa) $399.00

PRT-019 Ellison GS4200 0 to 1500 Bar (150MPa) $399.00 Price Each 1 5+

NPT-002 NPN430D pressure sensor 0 to 2 bar $149.00 less 10%

NPT-005 NPN430D pressure sensor 0 to 5 bar $149.00 less 10%

NPT-010 NPN430D pressure sensor 0 to 10 bar $149.00 less 10%

NPT-020 NPN430D pressure sensor 0 to 20 bar $149.00 less 10%

NPT-030 NPN430A pressure sensor 0 to 30 bar $149.00 less 10%

NPT-060 NPN430A pressure sensor 0 to 60 bar $149.00 less 10%

Page 100 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Digital Pressure Transmitter 2.5", 2 Wire Smart Pressure Gauges These are a great economical pressure tranmitter with inbuilt indicator These are a great economical pressure gauges with inbuilt indicator and and 4 to 20 mA output (2 wire). The display can be configured to show two relay outputs. The display can be configured to show the pressure in the pressure in Bar, metre, PSI, kPa, MPA, kg/cm², mmHg or inHg. The bar, PSI, kPa, MPA, kg/cm², mmHg or inHg. The gauge has two set points sensor mounts with a ¼" NPT thread. with hysteresis, allowing for simple level switching or window ("out of band") alarms. The display changes from green to vivid red with a relay Features: is triggered. The relays will switch 250 VAC at 5 A, allowing • Accuracy: ±0.25 % F.S. for direct control of compressors, pumps or alarms. The • Thick film strain guage on ceramic and stainless steel sensor mounts with a ¼" NPT thread. (SUS316) • Measurement range: -1 to 2 Bar or 0 to 250 Bar Specifications: • 5 digit, 10.16 mm tall red LED display • Accuracy: ±0.25 % F.S. • Configurable display units • Thick film strain guage on ceramic and stainless steel • Maximum and minimum value function (SUS316) • Supply range 10 to 28 VDC • -1 to 10 bar Measurement range • 16 bit resolution DAC, 4 to 20 mA output • 5 digit, 10.16 mm tall LED display • Protection class NEMA4/IP65 • Protection class NEMA4/IP65 • CE EMC certification • CE EMC certification

Price Each 1 5+ Price Each 1 5+

AXS-100 Digital Pressure Transmitter 2.5" -1 to $199.00 less 10% AXS-132 -1 to 10 bar smart gauge with two alarm $189.00 less 10% 2 Bar relays

AXS-101 Digital Pressure Transmitter 2.5" -1 to $199.00 less 10% AXS-134 -1 to 50 bar smart gauge with two alarm $189.00 less 10% 10 Bar relays

AXS-102 Digital Pressure Transmitter 2.5" -1 to $199.00 less 10% 50 Bar MPL115A1 Barometric Pressure Sensor Breakout AXS-103 Digital Pressure Transmitter 2.5" 0 to $209.00 less 10% The MPL115A1 is a digital barometric pressure sensor that uses MEMs 250 Bar technology to give accurate pressure measurements between 50 kPa and 115 kPa. We stock the SPI interface version of the sensor. Average current Digital Pressure Transmitter 2.5", 3 Wire consumption is 10 µA at one measurement per second.The sensor outputs both temperature and pressure readings on the SPI These are a great economical pressure tranmitter with inbuilt indicator bus. and 4 to 20 mA output (3 wire). The display can be configured to show Features: the pressure in Bar, PSI, kPa, MPA, kg/cm², mmHg or inHg. The sensor • Wide supply voltage range mounts with a ¼" NPT thread. • -40°C to 105°C maximum temperature range Features: • Low power consumption • ±1 kPa accuracy • Accuracy: ±0.25 % F.S. • 5 3 mm 1.2 mm • Thick film strain guage on ceramic and stainless steel × × (SUS316) • 5 digit, 10.16 mm tall red LED display Price Each 1 5+ • Maximum and minimum value function • Supply range 10 to 28 VDC BPS-002 MPL115A1 Barometric pressure sensor $29.00 less 10% • 16 bit resolution DAC, 4 to 20 mA output breakout • Protection class NEMA4/IP65 • CE EMC certification BMP085 Barometric Pressure Sensor Breakout Price Each 1 5+ The BMP085 is a high-precision, low-power barometric pressure sensor. AXS-105 Digital Pressure Transmitter 2.5" -1 to $229.00 less 10% The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute 10 Bar accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stabil- AXS-106 Digital pressure transmitter 2.5" -1 to $229.00 less 10% ity. This sensor supports a voltage supply between 1.8 and 3.6 VDC. It is 50 Bar designed to be connected directly to a micro-controller via the I²C bus Features: Smart Pressure Transducers with Modbus • Wide barometric pressure range • Ultra-low power consumption These pressure transducers have a display mounted directly to them. The • Low noise measurement display can be configured to show the pressure in a wide range of units. • Fully calibrated The sensor has two alarms that can be configured is a variety of ways. • Temperature measurement included The display changes colour from green to vivid red when an alarm is trig- • Ultra-flat, small footprint gered. Available in a 4 to 20 mA and Modbus RTU version and a dual 5 A, 250 V relay version. Price Each 1 5+ Specifications: • Accuracy: 0.25% Full scale BPS-003 BMP085 Barometric pressure sensor $19.00 less 10% • 14 to 30 VDC Powered breakout • Maximum pressure: 2 × rated. Burst: 3 × rated • ¼" NPT Thread

• Al2O3 to 96% ceramic diaphragm, stainless steel wetted materials Ocean Controls provides custom program- • 10.16 mm tall, 5 digit display ming, design and production services. We • IP65 can often modify our existing products to Price Each 1 5+ suit specific needs.

AXS-122 -1 to 10 bar, 4 to 20 mA smart transducer $299.00 less 10% RS-485 Full custom designs are possible with AXS-124 -1 to 50 bar, 4 to 20 mA smart transducer $299.00 less 10% RS-485 minimum orders as small as 20 units and we've had designs scale up to thousands of units shipped.

Ocean Controls Catalogue 2012 Page 101 OCEANSENSORS CONTROLS

Raw Water/Sewerage Float Switch Horizontal Stainless Steel Float Switch A float switch is a great way to automatically turn any appliance such as Can be used in conjunction with water pumps, solenoid valves, etc. Can be a pump, on or off. This float switch can be used in raw water, sewerage, mounted horizontally mounted so when the fluid level rises it will switch mild acid-base solutions, oils and situations requiring no pollution such ON at maximum float height. Can be used in fresh water, marine, sumps, as food and drinks. Operation voltage is 220 V and current can be up to automobile, industrial, agricultural fluid level sensing applications. 10 A. The float switch has 3 wires and features both a normally open and closed contact. Specifications: • 400mm wire leads Wiring: • 111 × 17 × 10 mm -- Brown wire: Common • Float Rise height: 40 mm from centreline -- Black wire: Normally Closed (Closed when hanging) • Operating Temp. Range -10 to 80 °C -- Blue wire: Normally Open (Closed when floating) • Max Contact Rating : 10 W • Max Switching Voltage : 100 VDC Specification: • Max Switching Current : 0.5 A • Rated Voltage: 250 V • Rated Current: 8 A • Max temperature: 70 Price Each 1 5+ • Working pressure: Max 1 Bar • Mechanical Endurance: 100,000 times HES-104 Horizontal Stainless steel float switch $19.95 less 10% • Electrical Endurance: 50,000 times • Protection grade: IP68CS Horizontal Mount Float Switch

Price Each 1 5+ Simple to use low cost plastic float switch. Can be used in tanks

HES-100 float switch with 10 m cable $39.95 less 10% Specifications: HES-101 Float switch with 20 m cable $49.95 less 10% • Switch type: SPST • Switching current: 0.5 A(DC) • Contact resistance: 100 mΩ Tank/Dam Level Sensor • Mounting hole M12 • Operate time: 0.8 ms This submersive pressure sensor can be used to accurately measure the • Flying lead length: 350 mm depth of liquids in wells, bores, tanks and reservoirs. Features: • Range: 0 to 10 m or 0 to 20 m, H2O (fresh water). Price Each 1 5+ • Process media: gases and liquids compatible with 316 L. • Output: 2 wire, 4 to 20 mA HES-106 Horizontal mount float switch $8.50 less 10% • Input: 24 VDC • Zero point and full scale is adjusted before shipping Vertical 40 mm Mount Float Switch • Accuracy: 0.5, 0.3 class. Simple to use low cost plastic float switch. Can be used in tanks • Material: Stainless steel 361 L • Overload: 150% of standard range. Specifications: • Ambient temperature: 0 to 60 °C. • Switch type: SPST • Switching current: 0.5A DC • Contact resistance: 100 mΩ Price Each 1 5+ • Mounting hole M12 IBP-100 Tank/Dam level sensor 0 to 10 m $299.00 less 10% • Shaft Length for Float 40 mm • Operate time: 0.8 ms IBP-102 Tank/Dam Level Sensor 0 to 20 m $359.00 less 10% • Flying lead length: 350 mm

Horizontal or Vertical Float Switch Price Each 1 5+ HES-107 40 mm Vertical float switch $8.50 less 10% Can be used in conjunction with water pumps, solenoid valves, etc. Can be used in fresh water, marine, sumps, automobile, industrial, agricultural fluid level sensing applications. Vertical 80 mm Mount Float Switch Specification: Simple to use low cost plastic float switch. Can be used • Can be mounted horizontally or vertically in tanks • 400 mm wire leads • Dimension: 88 × 18 × 16 mm Specifications: • Float Rise height: 40 mm from centreline • Switch type: SPST • Operating Temp. Range: 10 to 80 °C • Switching current: 0.5 ADC • Contact resistance: 100 mΩ • Mounting hole M12 Price Each 1 5+ • Operate time: 0.8 ms HES-105 Horizontal/vertical float switch $8.50 less 10% Price Each 1 5+ Float Switch HES-108 80 mm Vertical float switch $8.50 less 10% Fully immersible. Ideal for water tank systems such as rain or waste water management and so forth. Can be used to Horizontal Mount Stainless Steel Float Switch control pumps or electric valves when liquid levels change. Features a waterproof membrane which mounts on the Simple to use low cost float switch. Can be used in tank level controls. inside of the tank. Flying lead is 300 mm long. The NO/NC operation can be alternated by flipping the float over. Specifications: Specifications: • Switch type: SPST • Switch type: SPST • Switching current: 0.5 ADC • Rated voltage:220 VAC/ 24 VDC • Contact rating 1.5 A @200 VDC (Max) • Rated current:1.5 A • Contact resistance: 100 mΩ • Power: 50 W • Operate time: 0.8 ms • Mounting hole M12 • Temperature Rating: -30 to 147 °C • Operate time: 0.8 ms • Flying lead length: 300 mm Price Each 1 Price Each 1 5+ LSW-010 Horizontal mount float switch $24.95 HES-110 Horizontal mount stainless float switch $24.95 less 10% LSW-011 Vertical mount float switch $19.95

Page 102 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Vertical Mount Dual Float Switch Single/Dual Axis Inclinometer ±85º 4 to 20 mA Simple to use low cost float switch. Can be used in tank level or sump output controls. Because there are two floats you can use one float to start a The SCA118T-85 single axis inclinometer uses the latest MEMS technology pump and the other to stop it, thus reducing the frequency of starting. By to sense the angle of the device. The sensor mounts flat and default the float switch is closed at the bottom position. This can be al- provides a 4 to 20 mA output tilting from ±85 °C tered by removing the circlip and flipping the float over and then re-insert the circlip. Shaft is 125 mm in length Features: • 9 to 36 VDC supply Specification: • IP65 rated • Switch type: SPST • Wide operating temperature: -40 to 85 °C • Max Contact Rating 10 W • Max Switching Voltage 100 VDC • Rated current:0.5 A • Max Breakdown Voltage 220 VDC • Float Ball Material SUS304 Price Each 1 5+ • Mounting hole M12 • Operate time: 0.8 ms SRS-004 Single axis inclinometer ±85° 4 to 20 mA $239.00 less 10% • Flying lead length: 300 mm output SRS-009 Dual axis inclinometer ±85° 4 to 20 mA $259.00 less 10% output Price Each 1 5+ HES-113 Vertical Mount Dual Float Switch $27.95 less 10% Single/Dual Axis Serial (RS-485) Inclinometer ±45º The LCA316 single axis inclinometer uses the latest MEMS technology to Vertical Mount 40 mm Stainless Steel Float Switch sense the angle of the device. The sensor mounts flat and provides output through the serial interface RS-485 Simple to use low cost stainless steel float switch. Can be used in tank level or sump controls. By default the float switch is closed at the bottom Features: • Single/ Dual axis inclinometer position. This can be altered by removing the circlip and flipping the float • 9 to 15 V DC supply over and then reinsert the circlip • -45 to 45 º range on both axes Specifications: • IP65 rated • Switch type: SPST • Rugged casing,Shockproof>3500g • Maximum Breakdown Voltage: 220 VAC • Wide operating temperature -40 to 85 °C • Rated current:1.5 A • Power: 50 W • Mounting hole M12 Price Each 1 5+ • Operate time: 0.8 ms SRS-022 Single Axis serial, RS-485, inclinometer $139.00 less 10% • Flying lead length: 300 mm ±45° • Shaft Length 40 mm SRS-028 Dual Axis serial, RS-485, inclinometer $159.00 less 10% ±45° Price Each 1 5+

HES-111 Vertical mount 40 mm stainless steel float $19.95 less 10% switch Single/Dual Axis Inclinometer ±45º Voltage Output The LCA310 single axis inclinometer uses the latest MEMS technology to sense the angle of the device. The sensor mounts flat and provides a 0 to Vertical Mount 75 mm Stainless Steel Float Switch 5 V output tilting from ±45 °C. Simple to use low cost float switch. Can be used in tank level or sump controls. By default the float switch is closed at the bottom position. This Features: can be altered by removing the circlip and flipping the float over and then • Single/Dual axis inclinometer reinsert the circlip • 9 to 15 V DC supply • ±45 ºC range on both axes Specifications: • IP65 rated, Rugged casing • Switch type: SPST • Wide operating temperature -40 • Max Contact Rating 10 W to 85 °C • Max Switching Voltage 100 VDC • Rated current:0.5 A Price Each 1 5+ • Max Breakdown Voltage 220 VDC • Float Ball and Body Material SUS304 SRS-032 Single Axis Inclinometer ±45° voltage $139.00 less 10% • Mounting hole M12 output • Operate time: 0.8 ms • Flying lead length: 300 mm SRS-038 Dual axis inclinometer ±45° voltage $159.00 less 10% output Price Each 1 5+

HES-112 Vertical mount 75 mm stainless steel float $22.95 less 10% Dual Axis ±45° Serial Inclinometer and Two-way Tilt switch Switch The SCA130 dual axes tilt switch uses the latest MEMS technology to Single/Dual Axis Inclinometer ±45º 4 to 20 mA output sense the angle of the device. The sensor mounts flat and provides two orthogonal outputs for X and Y tilt from -45º to +45º. Output points read- The SCA118T single axis inclinometer uses the latest MEMS technology ing via RS-232. It has 2 PNP-style output with configura- to sense the angle of the device. IP65 rated. ble trip The sensor mounts flat and provides a 4 to 20 mA output tilting from ±45 ºC . Wide operating Features: temperature -40 to 85 °C • Dual axis inclinometer • RS-232 output Features: • 9 to 36 V DC supply • Single/Dual axis inclinometer • -45 to 45 º range • 9 to 36 V DC supply • IP65 rated • Full metal jacket, IP98 protection • Wide operating temperature -40 to 85 °C Price Each 1 5+

SRS-003 Single axis inclinometer ±45° 4 to 20 mA $239.00 less 10% output Price Each 1 5+

SRS-008 Dual axis inclinometer ±45° 4 to 20 mA $259.00 less 10% SRS-042 Dual axis ±45° Serial inclinometer and $259.00 less 10% output two way tilt switch

Ocean Controls Catalogue 2012 Page 103 OCEANSENSORS CONTROLS

Dual Axis ±10° Serial Inclinometer and Four-way Tilt Digital Spirit Levels Switch These digital spirit level allows you to measure angles, slopes, The SCA140 dual axes tilt switch uses the latest MEMS technology to level and plumb quickly and accurately. They feature both liquid sense the angle of the device. The sensor mounts flat and provides two bubble vials and a digital inclinometer built into a 600 mm / orthogonal outputs for X and Y tilt from -10º to +10º. 1000 mm spirit level rail. The switch action points and trigger delay time can be output and set For quick references use the sensitive liquid bubble vials. For through the RS-232 serial communication port. It has ZERO setting func- more precise work use the digital display to provide readings with tion and response frequency adjustment function is as well as configurable an accuracy of 0.1º. baudrate. They also feature a laser beam in the end to assist with align- There is a red LED positioned in each of the +X, -X, +Y, -Y corner to visu- ment. A slit allows the laser to be displayed as a dot or line. ally indicate that a relay has been triggered; as well as a blue LED in the Features: center to visually indicate that the device is in a • Measuring range: 0 to 360 °C centered position. • 600 mm length Features: • Accuracy: 0.1 <60 °C • Dual axis serial inclinometer • Easy to read LCD with backlighting for dark areas. • 9 to 36 VDC supply • Readings in LCD automatically rotate when level is held upside down. • 4 × PNP-style outputs with configurable trip points • switch between angle and pitch • Full metal jacket, IP67 protection • temperature range: -15 to +50(°Celsius) • Wide operating temperature -40 to 85 °C • audio prompt at 0 and 90 ° • Small size: 91 × 40 × 26 mm • record keeping function • five minutes power off automatically • low voltage alarm • lightweight Aluminium construction Price Each 1 5+

SRS-048 Dual Axis ±10° Serial inclinometer and $279.00 less 10% Four-way tilt switch

Dual Axis Battery Powered Serial ±45º inclinometer The DMI-600 dual axes digital inclinometer uses the latest MEMS technology sensor and can measure ±45º on two axes. An internal rechargeable battery and vivid display allow the unit to be used as a portable inclinometer, or to be mounted on moving machinery. RS-232 serial output allows connection to a computer, control system, external display or logging system. The unit can be powered from 7 to 35 VDC and comes with a 12 VDC plug pack (Suits Australian and New Price Each 1 5+ Zealand sockets) SRS-105 Digital Spirit level 60 cm $119.00 less 10% Features: • Dual axis digital inclinometer SRS-110 Digital Spirit Level 100 cm $129.00 less 10% • Wide measurement range ±45º on two axes • RS-232 output Industrial Microwitches • Internal rechargeable battery Simple to use industrial microswitches. • 7 to 35 VDC powered / charging • IP65 rated • Zero setting (relative measurement) function • ±0.04º Accuracy

• Wide operating temperature range -20 to 85 ºC

Price Each 1 5+

SRS-130 Dual axis battery powered serial ±45° $459.00 less 10% HES-204 inclinometer HES-200 HES-202 Specifications: Digital Level Gauge Box • Operating Force Max:1.77 N • Switch Terminals: Screw DMI100 is a vest-pocket sized digital Bevel box able to measure inclines • Circuitry: SPDT within the range of +/-180 (0-360 deg) and with a 0.1deg accuracy. • Contact Current Max: 10 A It performs the conversion between absolute measurement and relative • Mounting Type: Screw Terminal measurement by simply pressing one button "ZERO", The advanced sen- • No. of Switch Positions: 2 sor technology and microprocessor circuit provide unsurpassed accuracy. • Contact resistance: 25 mΩ maximum (initial) • Insulation resistance: 100 mΩ minimum @ 500VDC Features: • Dielectric strength: 1,000 AC for 1 minute • Stainless steel outer shell • Service life: Mechanically 15 millions ops • Magnet in base can stick to the surface to be measure • Operating Temperature: -10 to 80 °C • Accuracy:0.1<90(degrees) • Service life: Electrically 500,000 ops • Repeatability:0.1(degrees) • Body Dimensions 70 × 22 × 42 mm • Measurement range:±180(0-360degrees)) • Power: 3V Lithium battery Price Each 1 5+ • Data Quick reaction • Working Temperature 0-+45(Degrees Celsius) HES-200 microswitch roller lever $12.95 less 10% • Angle magnetic compensation • Waterproof: IP54 HES-202 Microswitch lever $12.95 less 10% • Absolute & relative Zero Setting HES-204 Microswitch multidirectional $12.95 less 10% • Hold Reading Function • Dimensions 50 x 50 x 33mm

Price Each 1 5+

SRS-100 Digital level gauge box $59.00 less 10%

Page 104 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Lever Actuated Microswitch Infrared Sensor Jumper Wire - 3 Wire JST Specifications: Three pin JST connector with red, black, and yellow • Switch Type: SPDT Momentary colors. 5 inch wire outs. This cable comes fully assembled • Contact Rating: 6 A @250 VAC as shown and connects directly to many different Sharp • Contact Resistance: < 15 mR sensors. Quick and easy, this cable will save you 15 to 20 • Actuator Length: 27 mm minutes over making your own wiring harness. • Long Lever Length: 51 mm

Price Each 1 5+ Price Each 1 5+ IRP-020 Infrared Sensor Jumper Wire-3 wires JST $1.75 less 10% LSW-001 Lever actuated microswitch (pictured) $3.27 less 10% LSW-002 Long lever actuated microswitch $3.27 less 10% Light Sensor Switch VCNL4000 Infrared Emitter Breakout A easy to use light sensor. Can be used to switch on lighting when it be- comes dark. Wall-mount with a cable grommet for weather-proof wiring. In physical computing it's sometimes nice to know how physically close Adjustable time delay. you are to an object. In other words, you may need to know your 'proximity' to an object, that's where the Specifications: VCNL4000 does its magic. Okay, it's not actually magic, • Rated Voltage: 105 to 305 VAC @50/60 Hz it's a combination ambient light sensor and IR proximity • Load Rating: 1000 W Tungsten, 1800 VA HID sensor. • Life at Rated Load: At least 5000 operations • Adjustable Time Delay: 30 to 120 Seconds The VCNL4000 can detect its proximity to an object using • Temperature Range: -40 to +70 °C IR within a range of about 20 cm. Proximity data as well • Power Consumption: < 1 W as ambient light level data can be collected over an I2C interface. This • Photocell: CdS breakout board gives you access to the I2C pins, the Vcc pin, GND and the IR+ pin (power supply for the built-in IR emitter). Simply give the Price Each 1 5+ board a clean 3.3 V power source and give the IR emitter anywhere from 2.5 to 5 V and you'll be able to tell how far you are from an object up to HEL-101 Light sensor switch $12.95 less 10% 20 cm. PIR Motion Sensor Price Each 1 This is a simple to use motion sensor. Power it up and wait 1 to 2 seconds SFS-300 VCNL4000 Infrared Emitter Breakout $9.95 for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low. Infrared Analog Distance Sensor Red wire is power (5 to 12 V). Brown wire is GND. Black wire is open collector Alarm. You can also install Infrared proximity sensor made by Sharp. Part # GP2D120XJ00F has a jumper wire past the 5 V regulator on board to make an analog output that varies from 3.1V at 3cm to 0.3V at 40cm with a this unit works at 3.3 V. Sensor uses 1.6 mA @3.3 V. supply voltage between 4.5 and 5.5VDC. Whereas, the Sharp. Part # The alarm pin is an open collector meaning multiple GP2Y0A21YK0F has an analog output that varies from 3.1V at 10cm to motion sensors can be connected on a single input 0.4V at 80cm. The Sharp GP2Y0A02YK0F has a detecting range of 15 to 150 pin. If any of the motion sensors go off, the input pin cm. will be pulled low. Both sensors have a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to Price Each 1 5+ the back of the module. PIR-001 PIR motion sensor $12.45 less 10%

ePIR Price Each 1 5+ Zilog’s ePIR is a fully functional motion-detecting single-board computer. IRP-001 Infrared Analog Distance Sensor, 15 to $15.95 less 10% Taking advantage of the processing capabilities of the Z8 MCU, the ePIR 150 cm, Sharp GP2Y0A02YK0F uses a powerful new statistical processing method to provide exceptional IRP-004 Infrared Analog Distance Sensor, 10 to $15.95 less 10% motion detection performance. 80 cm, Sharp GP2Y0A21YK0F The ePIR provides two interface modes: a simple hard- IRP-007 Infrared Analog Distance Sensor, 3 to $15.95 less 10% ware interface and more advanced serial method. If 40 cm, Sharp GP2D120XJ00F you’re using the hardware interface, the motion detect (MD) pin will go low when motion is detected. Infrared Proximity Distance Sensor, 2 to 10 cm, Sharp In serial mode, the ePIR is read and configured using the GP2Y0D810Z0F defined set of commands - all sent asynchronously at 9600 baud (8-N-1). The physcial interface of the ePIR is The GP2Y0D810Z0F is one of Sharp’s smallest and an 8-pin, 0.1” pitch male header. fastest distance sensors. With a sample rate of almost 400 Hz and a sensing distance to 10 cm, these sensors Features: provides attractive alternatives to longer-range but • Advanced software based motion detection algorithms provide supe- slower sensors such as the Sharp GP2Y0A21YK0F analog rior sensitivity and stability distance sensor. The output, Vo, is driven low when the • 2.7 to 3.6 VDC operating voltage sensor detects an object; otherwise, the output is high. • Typical current draw: 8.9 m • Wide 5 × 5 m, 60 °C detection pattern The GP2Y0D810Z0F detects objects between 2 cm • Adjustable sensitivity, delay and ambient light threshold and 10.25 cm away. There are a few millimeters of • SLEEP mode for low power applications hysteresis around the maximum range threshold and no hysteresis at the • No temperature compensation required minimum range threshold. • Dynamic PIR sensor stabilization minimizes power-on time • Photocell input for ambient light detection in lighting applications Note: that these sensors will only tell you if there is an object within the detection range along their lines of sight; they will not tell you how far away the object is. Price Each 1 5+

PIR-002 ePIR $15.95 less 10% Price Each 1

POL-1135 Infrared analog distance sensor $3.95

Ocean Controls Catalogue 2012 Page 105 OCEANSENSORS CONTROLS

Colour Sensor LS18R-300N/P Photo-electric switch

According to the principle of photo emission and receiving, color mark The LS18R-300N/P series is a retro-reflective type of sensor that has NPN/ sensor sends out modulated ray to the target object and receives the PNP-style output with a 18 mm diameter body. It require a power supply ray reflected from the object. The color of object can be detected or the range of 10 to 30 VDC. object can be identified by the intensity of the reflected ray. Specifications: Features: • Output Mode switchable “Light On” or • Colors available Green, Blue-Green, White “Dark On” • NPN Output. Switch up to 200 mA • Reflection Type with Reflector • Measuring Distance: 8 mm • Dimensions: 18 × 68 mm • High capability to reject the radial and the elec- • Detecting Distance: 0.1 to 3 metre tromagnetic interference. • Power Consumption: 15 mA max • Housing: precision die casting metal housing, with • Voltage Drop: <= 1.5 V built in heat elimination, electromagnetic shield • Detecting Delay Time: 2 ms and compactness. • Degree of Protection IP66 • With light -on and dark-on function, with output LED indicator. Price Each 1 5+ • Sensitivity adjustable by point meter, single loop or multi loops optimal to user. PES-002 Photo electric switch NPN LS18R-300N $52.50 less 10% • Polarity reversal, short circuit and overload protection • Adopt SMT automatic techinique. PES-003 Photo electric switch PNP LS18R-300P $52.50 less 10% • Capable of detecting transparent objects LS18T-15MT IR Photo Electric Switch Price Each 1 5+ The LS18T-15MT series is a through beam type of sensor that has NPN- IBP-200 Colour sensor Green NPN output $79.00 less 10% style output. The beam consist of transmitter LS18T-1500X and detector. Dimensions 18 × 68 mm IBP-201 Colour sensor Blue+green NPN output $79.00 less 10% Specifications: IBP-202 Colour sensor White NPN output $79.00 less 10% • Detecting Distance 0.1 to 15 m • Detects Opaque Objects (1cm min.) Laser Photo Electric Switch • Supply Voltage 12 to 24 VDC • Degree of Protection IP54 The laser photo electric switch is a through beam sensor that has a sensing distance of over 20 m. Price Each 1 5+

Specification: PES-006 Photo electric switch LS18T-15MT $75.00 less 10% • Type of reflection: T: THROUGH BEAM • Mounting distance Sn: 10 cm to 20 m • Out type: NPN (NO+NC) LS3-1MD IR Photo Electric Switch • Supply voltage (DC): 10 to 30 VDC The LS3-1MD is a diffusive type of switch with relay output. It has a sens- • Load current (DC/AC): 100 mA ing distance up to 100 cm. This type of senor switch in the presence of • Response time: THROUGH BEAM: < 1 ms transparent/opaque objects. • Working angle (T/R): < 3º • Difference distance: < 0.1% Specifications: • Function indication: Red LED Display • Supply Voltage: 12 to 240 VDC or 24 to 240 VAC • Detect mode: Red laser (640 to 655 nM) • Degree of Protection IP54 • IP rating (IEC60529): IP67 • Relay Output: 250 V @5 A • Ambient light: Incandescence lamp: 3000 Lx / Sun light 10000 Lx • Power Absorbed: < 2 W • Housing material: Nickle plated brass • Cable length (Standard): 2 m Price Each 1 5+

PES-004 Photo electric switch LS3-1MD $67.50 less 10% Price Each 1 5+

IBL-001 IBEST Laser photo sensor LAS- $75.00 less 10% T18No20MD LS3-3MR Photo Electric Switch The photo electric is a retro-reflective type of switch with relay output and is capable of detecting opaque objects with a minimum of 4.5 cm thick. Its LS18D-40x Tubular IR Photo Electric Switch detecting distance can go as far as 3 m. Specifications: The LS18D-40x series is a diffusive type of sensor that has NPN/PNP-style • Supply Voltage: 12 to 240 VDC or 24 to output. It has a detecting distance of 0 to 40 cm without reflection. 240 VAC Specifications • Degree of Protection IP54 • Output Mode switchable “Light On” or “Dark On” • Relay Output: 250 V @5 A • Dimensions 18 × 68 mm • Power Absorbed: < 2 W • Supply Voltage 10 to 30 VDC • Power Consumption 15 mA max • Maximum Output Current: 100 mA @24 VDC Price Each 1 5+ • Voltage Drop <= 1.5 V • Detecting Delay Time 2 ms PES-005 Photo electric switch LS3-3MR $72.50 less 10% • Degree of Protection IP66 LS3-15MT Photo Electric Switch Price Each 1 5+ LS3-15MT is a through beam type of switch, which is consist of transmitter PES-001 Photo electric switch NPN output LS18D- $44.50 less 10% LS3-15MT and detector LS3-15MX. It has NPN-style output and is capable 40N of sensing up to 15 m. Opaque objects with a minimum thickness of 2 cm will trigger the sensor. PES-007 Photo electric switch PNP output LS18D- $44.50 less 10% 40P Specifications • Dimensions 50 × 53 mm • 12 to 24 VDC Powered • Power Consumption 40 mA Max • Degree of Protection IP54 • Mounting Brackets included

Price Each 1 5+

PES-008 Photo electric switch LS3-15MT $95.00 less 10%

Page 106 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Mini Photo Electric Switch JX-P420 Series Linear Position Transducer 0-20” The 3 different series of Mini Photo Electric Switch we carry includes; The UniMeasure JX-P420 series linear position LS5R-2M, LS5T-6M and LS5D-30. Both the LS5R-2M/LS5T-6M have NPN measuring transducer is a low cost device for and PNP output, whereas the LS5D-30 has only NPN output. use in moderate duty applications in hostile wet or dry environments. LS5D-30 is a diffusive type that transmits an infra red beam and will detect the presence/absence of the reflected light off an object infont of it. It The chemical resistant thermoplastic case of has a detection distance up to 30 cm. the transducer provides NEMA 4 (IP-65) ingress protection for applications where exposure The LS5R-2M series is a retro reflective type that trans- to washdown, rain, oil and other liquids may mits an infra red beam, which is reflected off a reflector back to the sensor. The sensor will detect when the beam occur. The sealed case is achieved through the is broken by an object at a distance range up to 2 m with use of o-rings and a low friction shaft seal. An integral dust wiper insures a 2 cm minimum diameter object. that the wire rope stays clear of debris as it is extracted and retracted. The standard electrical connection includes a sealed bulkhead ftting and The LS5T-6M is a through beam type, where the sensor multi-conductor electrical cable. The wire rope exit direction may be comes in two parts; a transmitter and a receiver. The specifed at time of order or may be user adjusted at time of installation. transmitter transmits an infrared beam to the receiver and the receiver The JX-P420 series transducer is a loop powered device with a 4 to 20 mA will detect when an object breaks the beam. It has a detection distance up current output that requires a two wire connection. to 6 m. The transducer, power supply, and current monitor are connected in Price Each 1 5+ series. Zero and span adjustment potentiometers are accessible by removing two sealing screws in the rear of the transducer housing. Zero and PES-022 LS5D-30 Mini Photo Electric Switch NPN $59.00 less 10% span allow for adjustment for a full 4 to 20 mA output at between 50% and 100% of maximum linear travel. PES-022 LS5D-30 Mini Photo Electric Switch PNP $59.00 less 10%

PES-024 LS5R-2M Mini Photo Electric Switch NPN $69.00 less 10%

PES-026 LS5R-2M Mini Photo Electric Switch PNP $69.00 less 10% Price Each 1 5+

PES-028 LS5T-6M Mini Photo Electric Switch NPN $79.00 less 10% ADS-320 JX-P420 serial linear position transducer $679.00 less 10% 0-20" PES-030 LS5T-6M Mini Photo Electric Switch PNP $79.00 less 10% ADS-326 JX-P420 serial linear position transducer $679.00 less 10% 0-60" Industrial Grade Photo Interrupter NPN Output This industrial photo interrupter is IP65 and has a generous 30 mm wide PL-S Series Length Sensor slot. The unit has a green power indicator LED and a red LED that lights Product Features : up when the slot is filled. A small potentiometer allows for adjustable • Can measure the length of cloth, paper plastics, etc. sensitivity. The unit has two NPN-type outputs: a normally open (NO) and Photoelectric output with stable signals and long a normally-closed (NC) output. It has 4 wires output. service life. • Using Nickel-Zinc alloy, it’s weightily and doesn’t Features: skid. • Infrared LED light • The wheels adopt imported tire latex, endurable to • Robust construction resistant to shock and vibra- friction. tion • Power and detection LEDs Specifications • Dimensions: 72 × 52 × 20 mm • Fast 3 ms response time PL- PL- PL- PL- PL- PL- Item No. • High precision, Reverse polarity protection D2M(Y) D3M(Y) S1M(Y) S2M(Y) S3M(Y) S4M

1 cm Unit 10 cm 1 m 10 cm 1 cm 1 mm Price Each 1 5+ (0.01) Quadra- Quad- Single Single Single Single IBP-050 Industrial grade photo interrupter NPN $25.00 less 10% Output type ture rature phase phase phase phase

Output Im- Industrial Grade Photo Interrupter 2.7 K 2.7 K 2.7 K 2.7 K 2.7 K 2.7 K pedance This Photo Interrupter is suited for Industrial Use. Fully sealed it is easily Power Supply 12 to 24 VDC mounted with 2 supplied screws. Dimensions: 55 × 30 × 14 mm Current Con- 70 mA 70 mA 70 mA 70 mA 70 mA 70 mA Features: sumption • Supply Voltage 12 to 24 VDC Output Cur- 100 • Current Consumption 18 mA Max 100 mA 100 mA 100 mA 100 mA 100 mA • Frequency of Response 2 KHz rent mA • Output NPN Transistor 100 mA MAX • Degree of Protection IP66

Price Each 1 5+ Price Each 1 5+ COS-301 PL-D2M 10 CM length sensor $165.00 less 10% PES-011 Photo interrupter switch PU-08 $29.00 less 10% COS-302 PL-D3M 1 CM length sensor $199.00 less 10% PCB or Chassis Mount Photo Interrupter COS-310 PL-S1M 1 M length sensor $149.00 less 10% This device enables you to turn off a circuit on and off optically. It consists COS-311 PL-S2M 10 CM length sensor $149.00 less 10% of an IR LED facing a phototransistor across an air gap. COS-312 PL-S3M 1 CM length sensor $159.00 less 10% Any object in the gap will interrupt the IR beam and consequently switch the phototransistor on and off. COS-313 PL-S4M 1 MM length sensor $169.00 less 10% The device is very fast and ideal for counting, timing or sensing. • Block Measures 25 × 5 × 3 mm • Gap measure 3 mm • Mount Hole Dia 3.2 mm

Price Each 1 5+

PES-010 Photo interrupter component switch $5.50 less 10%

Ocean Controls Catalogue 2012 Page 107 OCEAN SENSORSCONTROLS

JPEG Trigger Accelerometer Breakout Board - ADXL320 ±5 g The default firmware requires that a FAT16 formatted microSD card be Breakout board for the dual axis ADXL32x accelerometers. Brings out the inserted into the microSD socket. After you turn the board on, the status analog voltage levels from the X and Y axis to a standard .1” header. LED will turn on signifying the board is ready to be triggered. If the LED starts blinking, the SD card failed to initialize and you should make sure The ADXL320 can be powered from 2.4 V to 5.25 V. The it's been formatted correctly. Once the camera is triggered the board will Self-Test pin can be used to verify sensor operation. capture a JPEG image and save it to the SD card. The file will be saved Board comes fully assembled and tested with selected with a simple 3 digit number which is incremented each time a picture is sensor and 0.1 uF filtering capacitors. captured. While this happens, the status LED will start Installed Sensor: ADXL320 (± 5 g) blinking. Features: The camera can not be triggered again until the board • Dimensions: 4 mm × 4 mm × 1.45 mm, LFCSP package finishes saving the current picture. After the JPEG • 2 mg resolution at 60 Hz • Wide supply voltage range: 2.4 V to 5.25 V Trigger has finished recording the image, the board • Low power: 350 μA at VS = 2.4 V (typ) will go back into the ready state and the status LED • Good zero g bias stability will go back to being solid. Each picture taken is saved • Good sensitivity accuracy as an individual 320 240 JPEG file. × • X-axis and Y-axis aligned to within 0.1° (typ) • BW adjustment with a single capacitor • Single-supply operation Price Each 1 5+ • 10,000 g shock survival SFC-060 JPEG trigger $29.00 less 10% • Compatible with Sn/Pb and Pb-free solder processes

LinkSprite JPEG Camera with TTL Serial Interface Price Each 1 5+ The LinkSprite JPEG color camera allows you to capture and output JPEG ACC-006 Accelerometer board ADXL320 ±5g $32.95 less 10% images through UART, making it easy to integrate into an existing design. Note: These only work reliably with a 5V power supply, even Serial Accelerometer Tri-Axis v5 - Dongle though the manual states they can work at 3.3V. If you want to The SerAccel v5 is a 3 axis accelerometer up to ±6 g with a simple se- use it at 3.3v, you will need a lower baud rate. rial interface. The latest SerAccel development, version 5 has many new Features: improvements including variable baud rate, a factory • VGA/QVGA/160 × 120 resolution reset command, and a complete triple axis measure- • Support capture JPEG from serial port ment system based on the newly released MMA7260Q • Default baud rate of serial port is 38400 sensor from Freescale. • 5 V power supply • Current consumption: 80 to 100 mA Power is gained from any RS-232 port (including USB to RS-232 converters) so no external power supply is Price Each 1 5+ needed.

SFC-061 Linksprite JPEG Camera with TTL serial $55.00 less 10% The onboard microcontroller outputs three differ-ent interface types of outputs including calculated, binary, and raw outputs. The SerAc- cel v5 has software configurable settings to select between 4 sensing ranges (± 1.5, 2, 4, and 6 g), as well as a software selectable measure- ITG-3200 Triple-Axis Digital-Output Gyro Breakout ment frequency (0 to 590 Hz). Communication with the ITG-3200 is achieved over a two-wire (I2C) in- The SerAccel outputs real-time accelerations from 9600 to 57600 bps us- terface. The sensor also features a interrupt output, and an optional clock ing visible ASCII characters. The SerAccel is compatible with any RS-232 input. A jumper on the top of the board allows you to easily select the Comm port in conjunction with any terminal program (Hyperterminal, VB I2C address, by pulling the AD0 pin to either VCC or GND; the board is Programs, or anything else that can read the comm port). Works with USB shipped with this jumper tied to VCC. If you don't plan on using the CLKIN to RS-232 converters. SPI and I²C interfaces. Free logging software is pin, you can short the jumper on the bottom of the board to tie it to GND available This breakout board is shipped as shown in the images.

Note that there are two unpopulated resistors on the I2C lines, Price Each 1 5+ these can be added later by the customer if desired. ACC-010 Serial accelerometer tri-axis v5- Dongle $63.95 less 10% Features: • Digital-output X-, Y-, and Z-Axis angular rate sensors (gyros) on one integrated circuit Triple Axis Accelerometer Breakout - MMA7341L • Low 6.5 mA operating current consumption for long battery life This triple-axis accelerometer is a carrier board for the Freescale • Supply Voltage: 2.1 V to 3.6 V MMA7341L XYZ-axis accelerometer, a great low-g sensor with analog volt- • Standby current: 5 μA age outputs and adjustable sensitivity (±3 g or ±11 g) and a 0 g, detects • Digital-output temperature sensor digital output that signals when the board is in free-fall. • Fast Mode I2C (400 kHz) serial interface • Optional external clock inputs of 32.768 kHz or The board has a 3.3 V linear regulator that enables an input voltage range 19.2 MHz to synchronize with system clock of 2.2 to 16 V. Output format: 3 analog voltages (one signal for each axis) centered at half the voltage of the 3V3 pin. Price Each 1 5+ Features: • Dimensions: 0.5" × 0.9" × 0.09" (1.2 × 2.3 × 0.23 SFG-098 ITG-3200 Triple-axis Digital output GYRO $49.00 less 10% cm) (without header pins) breakout • Operating voltage: 2.2 to 16 V connected to VIN (all pins besides VIN are not 5 V-tolerant) • Supply current: 0.5 mA Accelerometer Breakout Board - ADXL322 ±2g • Output format: 3 analog voltages (one signal for each axis) centered at half the voltage of the 3v3 Breakout board for the dual axis ADXL32x accelerometers. Brings out the pin analog voltage levels from the X and Y axis to a standard .1” header. The ADXL320 can be powered from 2.4 V to 5.25 V. The Self-Test pin can be used to verify sensor Price Each 1 5+ operation. Board comes fully assembled and tested with POL-1252 Triple Axis accelerometer breakout- $17.50 less 10% selected sensor and 0.1 uF filtering capacitors. Installed MMA7341L Sensor: ADXL322 (± 2g).

Price Each 1 5+

ACC-005 Accelerometer board ADXL322 ±2g $32.95 less 10%

Page 108 Ocean Controls Catalogue 2012 OCEANSENSORS CONTROLS

Triple Axis Accelerometer Breakout - ADXL345/ ADXL335 Evaluation Board - ADXL345 Breakout board for the Analog Device ADXL345. The ADXL345 is a small, This is an evaluation board for the ADXL345 three-axis thin, low power, 3-axis accelerometer with high resolution (13-bit) meas- accelerometer. The ADXL345 is an awesome little ac- urement at up to ±16 g. celerometer, capable of measuring acceleration of up to ±16 g at up to 13-bit resolution. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The The evaluation board includes everything you’ll need ADXL345 is well suited to measures the static acceleration of gravity in to adjust the ADXL345’s settings, and monitor and log tilt-sensing applications, as well as dynamic acceleration resulting from its outputs. motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°. The on-board ATmega328 takes care of all the I²C/SPI communication with the ADXL345, and it will also log the x-, y-, and z-axis acceleration Breakout board for the 3 axis ADXL335 from Analog values onto a uSD card. The ATmega328 also comes with the Arduino Devices. This is the latest is a long, proven line of bootloader installed, so it can be reprogrammed via USB using the Ar- Accelerometers. The ADXL335 is a triple axis ac- duino IDE. celerometer with extremely low noise and power consumption - only 320 uA! Sensor ranges from ±3 g. The board includes a USB interface, which allows you to read/write any of Board comes fully assembled and tested with external the ADXL345’s registers using a terminal emulator. The default baud rate components installed. is 57600 bps (8-N-1). The UART pins are also broken out allowing a direct TTL interface with the processor. Note: The silkscreen indicators for the axes are incorrect. Please refer to the datasheet for the correct orientation. Power can be supplied by 2×AA batteries, or with a 3.0 to 3.3 VDC power supply at the VCC/GND pins. The ADXL345 evaluation board does not include batteries, uSD card or a USB cable, check the related items section Price Each 1 5+ below for these products.

ACC-023 Tripple Axis accelerometer breakout- $27.95 less 10% ADXL345 Price Each 1 5+

ACC-024 Triple axis accelerometer breakout- $25.95 less 10% ACC-300 Evaluation board-ADXL345 $45.95 less 10% ADXL335 9 Degrees of Freedom Sensor Stick Triple Axis Accelerometer Breakout-MMA8452Q The 9DOF Sensor stick is a very small sensor board with The MMA8452Q is a smart low-power, three-axis, capacitive micro- 9 degrees of freedom. It includes the ADXL345 acceler- machined accelerometer with 12 bits of resolution. This accelerometer is ometer, the HMC5883L magnetometer, and the ITG-3200 packed with embedded functions with flexible user programmable options, gyro. The 'stick' has a simple I2C interface and a mounting configurable to two interrupt pins. Embedded interrupt functions allow hole for attaching it to your project. Also, the board is a for overall power savings relieving the host processor from continuously mere 0.036" thick (0.093" overall), allowing it to be easily polling data. mounted in just about any application. The MMA8452Q has user selectable full scales of ±2 g/ ±4 g/ ±8 g with high pass filtered data as well as non filtered data available real-time. This board breaks out the ground, power, I2C and two external interrupt pins. Features: Price Each 1 5+ • 1.95 to 3.6 V supply voltage SFS-203 9 Degrees of Freedom Sensor Stick $99.00 less 10% • 1.6 to 3.6 V interface voltage • ±2 g/ ±4 g/ ±8 g dynamically selectable full-scale • Output Data Rates (ODR) from 1.56 Hz to 800 Hz 9 Degrees of Freedom - Razor IMU - 16 MHz • 12-bit and 8-bit digital output The board comes programmed with the 16 MHz Ar- duino bootloader and example firmware that tests Price Each 1 5+ the outputs of all the sensors. Simply connect to the serial TX and RX pins with a 3.3 V FTDI Basic ACC-025 Triple Accelerometer breakout board- $9.95 less 10% Breakout, open a terminal program to 38400 bps MM8452Q and a menu will guide you through testing the sensors. BMA180 Triple Axis Accelerometer You can use the Arduino IDE to program your code onto the 9DOF, just select the ‘Arduino Duemilanove w/ATmega328’ as your board.The 9DOF This is a breakout board for Bosch's BMA180 three-axis, ultra-high operates at 3.3 VDC. Any power to the board will be regulated down to performance digital accelerometer. The BMA180 provides a digital 14-bit this operating voltage - our LiPo batteries are an excellent power supply output signal via a 4-wire SPI or I2C interface. The full-scale measure- choice. ment range can be set to ±1 g, 1.5 g, 2 g, 3 g, 4 g, 8 g or 16 g. The output header is designed to mate with our 3.3 V FTDI Basic Breakout Other features include programmable wake-up, low-g and high-g detec- board, so you can easily connect the board to a computer’s USB port. Or, tion, tap sensing, slope detection, and self-test capability. The sensor also for a wireless solution, it can be connected to the Bluetooth Mate or an has two operating modes: low-noise and low-power. XBee Explorer. Features: Features: • 14 or 12-bit ADC conversion • 9 Degrees of Freedom on a single, flat board: • 2 selectable I2C addresses LY530ALH - 300° / s single-axis gyro • Programmable integrated digital filters (no LPR530ALH - 300° / s dual-axis gyro external components necessary) ADXL345 - 13-bit resolution, ±16 g, triple-axis accelerometer o 8 low-pass filters HMC5843 - triple-axis, digital magnetometer o 1 high-pass filter • High pass filter on the gyro outputs o 1 band-pass filter • Outputs of all sensors processed by on-board ATmega328 and sent • Programmable interrupt: out via a serial stream o Wake-up • Output pins match up with FTDI Basic Breakout, Bluetooth Mate, o Low-g detection XBee Explorer o High-g detection o Tap sensing • 3.5 to 16 VDC input o Slope detection • ON-OFF control switch and reset switch • 2 main standard modes: low-noise and low-power • Sleep/Wake up mode Price Each 1 5+ • Self-test capability SFG-009 9 Degrees of freedom-Razor IMU-16 MHz $139.95 less 10% Price Each 1 5+

SFS-202 BMA180 Triple axis accelerometer $32.00 less 10%

Ocean Controls Catalogue 2012 Page 109 OCEANSENSORS CONTROLS

Axis Magnetometer Breakout - HMC5883L LPY510AL Dual-Axis (Pitch and Yaw or XZ) Gyro with This is a breakout board for Honeywell's HMC5883L, a 3-axis digital com- ±100 °/s and ±400 °/s Ranges pass. Communication with the HMC5883L is simple and all done through This gyroscope board is a basic carrier/breakout board for the ST an I2C interface. There is no on-board regulator, so a regulated voltage LPY510AL dual-axis gyro, which measures the angular rates of rotation of 2.16 to 3.6 VDC should be supplied.The breakout board includes the about the pitch (x) and roll (y) axes. Two separate analog voltage outputs HMC5883L sensor and all filtering capacitors as shown. for each axis provide angular velocity ranges of ±100 °/s and ±400 °/s. The power and 2-wire interface pins are all broken out This board has a 3.3 V regulator for easy integration with 5 V parts, to a 0.1" pitch header. includes a low-pass filter on each output for noise reduction, and is Features: smaller than competing products, all at a lower price. • Low current draw Features: • 5 milli-gauss resolution • Assorted sensitivities from ±100 °/s to ±2000 °/s available. • Optional power-down input; may be shorted to a Price Each 1 5+ neighboring ground pin if the low-power state is not needed. MAG-004 Axis Magnetometer breakout-HMC5883L $12.50 less 10% • Optional embedded self-test input; this is connected to a pull-down resistor on the board to disable it by default. • Two-stage low-pass filtered output to reduce high-frequency noise. LSM303 Tilt Compensated Compass • Two mounting holes (0.086", intended for #2 screws) for sturdy con- The LSM303DLH is a triple axis accelerometer combined with a triple axis nection to a robot chassis or project enclosure. magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you need to feed into a microcontroller and calculate tilt-compensated output. Price Each 1 5+ Features: POL-1267 LPY510AL Dual-Axis (Pitch and Yaw or XZ) $22.95 less 10% • ± 2/ 4/ 8 g dynamically selectable full-scale Gyro with ±100 °/s and ±400 °/s Ranges • ±1.3 to ± 8.1 gauss magnetic field full-scale • 16-bit data out • I2C interface Current Sensor ACS712 Breakout • Embedded self-test This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement Price Each 1 5+ for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions. The SFS-201 LSM303 Tilt compensated compass $29.00 less 10% ACS712 outputs an analog voltage output signal that varies linearly with sensed current. The device requires 5 VDC for VCC and a couple of filter Compass Module - HMC6352 capacitors. Features: This is a very simple breakout board for the popular HMC6352. Remember • x05B (5 A) version . Low noise analog signal path the KISS mantra? We really enjoy the simplicity and ease of use with the • Device bandwidth is set via the FILTER pin HMC6352. If you need simple, clean, degree resolution compass heading, • 5 us output rise time in response to input current this is the way to go. Simple I²C interface • 80 kHz bandwidth; 1.5% output error at 25 degrees Features: • 1.2 mΩ internal conductor resistance • 2.7 to 5.2 V supply range • 2.1 kV RMS minimum isolation voltage from pins • 1 to 20 Hz selectable update rate 1 to 4 to pins 5 to 8 • True drop-in solution • 66 to 185 mV/A output sensitivity • 0.5 degree heading resolution • Factory-trimmed for accuracy • 1 degree repeatability • Nearly zero magnetic hysteresis • Supply current : 1 mA @3 V Price Each 1 5+ Price Each 1 5+ SFC-001 ACS712 Breakout $12.50 less 10% MAG-003 Compass module-HMC6352 $34.95 less 10% Current Sensor ACS712 Low Current Sensor Breakout LPY510AL Gyro Board - 100 and 400 °/sec This current sensor gives precise current measure- This gyroscope board is a basic carrier/breakout board for ment for both AC and DC signals. These are good the ST LPY510AL dual-axis gyro which measures the angu- sensors for metering and measuring overall power lar rates of rotation about the pitch (x) and yaw (z) axes. consumption of systems. Two separate analog voltage outputs for each axis provide angular velocity ranges of ±100 °/s and ±400 °/s. This The ACS712 current sensor measures up to 5 A of board has a 3.3 V regulator DC or AC current. We added an opamp gain stage for more sensitive current measurements. By adjusting the gain (from 4.27 to 47) you can measure very small currents. Price Each 1 5+ The bandwidth on the ASC712 Low Current Sensor Breakout has been set POL-1266 LPY510AL Gyro breakout board $22.95 less 10% to 34 Hz to reduce noise when using at high gains. The full 80 KHz bandwidth that the sensor is capable of can be recovered by removing C1. Features: Accuracy of Tilt sensors is dependent on • Low-noise analog signal path • Device bandwidth is set via the new FILTER pin various factors such follow: • 5 μs output rise time in response to step input current • Gravity. • 80 kHz bandwidth • Total output error 1.5% at TA = 25°C • Clear line of sight between the user and meas- • Small footprint, low-profile SOIC8 package ured object. • 1.2 mΩ internal conductor resistance • Temperature (drift), zero offset, linearity, vibra- • 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8 tion, shock, accerleration/deceleration • Factory tilt calibration may differ to the actual Price Each 1 5+ user's site. SFC-002 ACS712 Low Current Sensor breakout $23.95 less 10% • The measured object must be well defined to obtain maximum precision.

Page 110 Ocean Controls Catalogue 2012 OCEANSIGNAL CONDITIONERSCONTROLS

ACS714 Current Sensor Carrier -30 to +30 A Current Transformers 75:5, 100:5, 150:5 A This current sensor is a breakout board for Allegro’s ACS714LLCTR-30A-T This is a current transformer produces a 0 to 5 AAC signal with a 0 to 150 Hall effect-based linear current sensor. Designed for bidirectional input (75,100,150) AAC primary current. It is Class 1.0 which means it is suit- current from -30 to 30 A. Sensor IC can survive up to five times the over- able for metering and can be used with our 3 phase Power Meter ALT-022. current condition. The included DIN-rail base clip can be mounted either vertically or horizontally. The primary hole can accommodate conductors up to ø22 mm The pads are labeled on the bottom silkscreen, as shown in the picture to the right. The silkscreen also Features: shows the direction that is interpreted as positive cur- • 75:5, 100:5, 150:5 A Current Rating rent flow via the +i arrow. • 720 VAC rated • Built-in hinged terminal covers Features: • 22 mm diameter primary hole • Conductive path internal resistance is typically 1.2 mΩ, and the PCB is made with 2-oz copper, • DIN rail mount in two orientations so very little power is lost in the board. • Class 1.0 • Use of a Hall effect sensor means the IC is able to electrically isolate the current path from the sensor’s electronics (up to 2.1 kV RMS), which allows the sensor to be inserted anywhere along the current Price Each 1 5+ path and to be used in applications that require electrical isolation. • 80 kHz bandwith that can optionally be decreased by adding a capaci- HES-605 Current transformer 75:5 $34.95 less 10% tor across the board pins marked “filter”. HES-610 Current transformer 100:5 $34.95 less 10% • High accuracy and reliability: typical total output error of 1.5% at room temperature with factory calibration, an extremely stable output HES-615 Current transformer 150:5 $34.95 less 10% offset voltage, and almost zero magnetic hysteresis. • Automotive grade operating temperature range of -40 °C to 150 °C. General specifications Signal Conditioners -- Current sense: 0.066 V/A -- Minimum logic voltage: 4.5 V Analog Isolated Transmitter -- Maximum logic voltage: 5.5 V -- Supply current: 13 mA The Analog Isolated Transmitter series we carry has various input and output, as listed in the price table below. All of which features 3 way 2 kV isolation (input/output 1/supply), a 24 VDC excitation voltage to power Price Each 1 sensors and a 5 digit programmable display. The display allows technicians to easily view the input signal and determine if a fault has occurred. POL-1187 ACS714 Current sensor carrier -30 to +30 A $16.50 Features: • 0.1% Full scale accuracy Mini Precision Current Transformer 5 A/ 2 mA • 4 to 20 mA input • 4 to 20 mA or 0 to 10 VDC output Produce a 0 to 2 mA AC signal with a 0 to 5 A AC primary current. Accepts • a 24VDC Excitation Voltage is available to power sensors cables up to 7 mm in diameter. • 16 bit high resolution DAC • Wide voltage range (18 to 60 VAC/DC) input power Specifications: • Three way, 2 kV isolation • Rated Primary Current at 50/60 Hz: 5 A • Mounts onto DIN rail • Maximum Primary Current at 50/60 Hz: 20 A • RS-485 Modbus Connection (Optional) • Turns Ratio: Np:Ns = 1:2,500 • 1 or 2 Alarm Relays (Optional) • Current Ratio: 5 A : 2 mA • High stability • Winding D.C. Resistance at 20 °C: 155 Ω • CE EMC certification • Accuracy: 2% • Dimension 23 (W) × 76(H) × 96(D) m • Operating Temperature: -40 to 85 °C • Storage Temperature: -45 to 90 °C • Dielectric Withstanding Voltage: 4,000 V / 1 mA / 1 sec Price Each 1 5+ • Dimensions: 25 11 25 mm × × AXB-050 Analog Isolated Transmitter 4 to 20 mA $179.00 less 10% input and 4 to 20 mA output

Price Each 1 5+ AXB-051 Analog Isolated Transmitter 4 to 20 mA $179.00 less 10% input and 0 to 10 VDC output ALT-050 Mini precision current transformer 19.95 less 10% 5 A/ 2 mA AXB-052 Analog Isolated Transmitter 0 to 10 VDC $189.00 less 10% input and 4 to 20 mA output

Split Core Current Transformer 60 A/ 20 mA or 120 A/ 40 mA Single & Dual Analog Isolated Transmitter The single or dual analog is a 4 to 20 mA input, 4 to 20 mA output This is a small split core current transformer which is able to produce a isolated transmitter. It features 3 way 1.5 kV isolation (input / output 1 / 0-20 mA AC signal with a 0-60 A AC primary current. The split core al- supply) and a 24 VDC Excitation Voltage to power sensors. The span and lows the transformer to be clipped on to a wire without disconnecting the zero of the output current can be adjusted over a wide range. primary current carrying wire. Features: Specifications: • 0.1% Full scale accuracy • Rated Primary Current at 50/60 Hz: 60 A • 4 to 20 mA input • Maximum Primary Current at 50/60 Hz: 70 A • 4 to 20 mA output • Maximum Primary Current: 120 A • A 24VDC Excitation Voltage is available to power sen- • Turns Ratio: Np:Ns = 1:3,000 sors • Current Ratio: 60A:20mA • Wide voltage range (18 to 60 VAC/DC) input power • Winding D.C. Resistance at 20 °C: 470 Ω ± 5% • Three way, 1.5kV isolation • Accuracy: 2% • Mounts onto DIN rail • Linearity @RL≤10 Ω: 0.5% • High stability, CE EMC certification • Phase error at rated current: ≤3.5° • Dielectric Withstanding Voltage: 2,500 V / 1 mA / 1 min Price Each 1 5+

AXB-070 Slim Analog Isolated Transmitter 4 to 20 $149.00 less 10% Price Each 1 5+ mA input and 4 to 20 mA output

ALT-051 Split core current transformer $29.95 less 10% AXB-071 Slim Analog Isolated Transmitter 4 to 20 $189.00 less 10% 60 A/ 20 mA mA input and DUAL 4 to 20 mA output

AXS-601 Split core current transformer $34.95 less 10% 120 A/ 40 mA

Ocean Controls Catalogue 2012 Page 111 OCEANSIGNAL CONDITIONERSCONTROLS

Slim Analog Isolated Transmitter TxIsoRail Programmable Current/Voltage Output The slim analog isolated transmitter converts 0 to 5 A AC RMS current The TxIsoRail is a programmable DIN rail mount 4 to 20 mA or 0 to 10 V to 4 to 20 mA or 0 to 10 VDC. It is suitable for use with AC current output temperature transmitters. One single model can be configured to transformers that has 0 to 5 A output. All of which features a 3 way 1.5 accept several thermocouple types and Pt100 RTD input. kV isolation (input/output 1/supply) and a 24 VDC excitation voltage to power sensors. The span and zero of the output current can be adjusted Specifications: over a wide range. -- Programmable input: thermocouples type J,K,T,N,E,R,S,B, and Pt100 RTD, 10 V and 0 to Features: 50 mA • 0.1% Full scale accuracy -- Power supply: 12 to 30 Vdc • 0 to 5A AC RMS input -- 2 or 3-wire Pt100 with linearization • 0 to 10 VDC or 4 to 20 mA output -- Accuracy: ±0.2% full scale for Pt100 and 0.3% max. of FS for thermocouples. • Wide voltage range (18 to 60 VAC/DC) input power • Three way, 1.5 kV isolation Use TxConfig SIG-007 or SIG-008 to program it to your • Mounts onto DIN rail requirements or if you like we can program it for you at no • High stability, CE EMC certification extra charge • Dimension 23 (W) × 76(H) × 96(D) m

Price Each 1 5+ Price Each 1 5+ SIG-005 TxIsoRail Isolated DIN mount 4 to 20 mA $139.00 less 10% AXB-080 Slim Analog Isolated Transmitter 0 to 5 A $149.00 less 10% AC RMS input and 4 to 20 mA output SIG-006 TxIsoRail Isolated DIN mount 0 to 10 V $139.00 less 10%

AXB-081 Slim Analog Isolated Transmitter 0 to 5 A $149.00 less 10% SIG-008 TxConfig USB interface cable for PC $89.00 less 10% AC RMS input and 0 to 10 VDC output Single & Dual 4 to 20 mA Isolators Programmable Non Isolated/Isolated HeadMount Trans- Loop isolators provide signal protection by electrically isolating the input mitter signal from the output. TxIsoLoop-1 and TxIsoLoop-2 simplify your ap- The TxBlock is a programmable head mount 4 to 20 mA temperature plication and avoid the undesirable ground loops by providing single and transmitters. One single model can be configured to accept several ther- dual loop galvanic isolation. mocouple types and Pt100 RTD. output. The 0/4 to 20 mA input is measured and an identical isolated signal is re- Specifications produced at the output. Power is drawn from the 0/4 to 20 mA input loop, thus no external power supply is needed. -- Programmable input: thermocouples type J,K,T,N,E,R,S,B, and Pt100 RTD Specifications - 2-wire loop powered 4 to 20 mA output - • Input Signal (INPUT): 0 to 20 mA; 4 to 20 mA (check minimum cur- -- Power supply: 12 to 30 Vdc (Depends on load resistance). rent - for proper operation) -- Linearized output and cold junction compensation for thermo- • Maximum Input voltage (Vin max.): 32 Vdc; Voltage Drop (Vdrop): couples. < 3 Vdc -- 2 or 3-wire Pt100 with linearization • Output Signal (OUTPUT): 0(4) to 20 mA; Max. -- Accuracy: +-0.2% full scale for Pt100 and Load (RL): 1450 R 0.3% max. of FS for thermocouples • Accuracy: 0.2 % FS @ 0 a 60 °C / RL= 250 R; -- Isolation: 1500 Vac between sensor input and 0.3 % FS @ -20 a 75 °C / RL= 250Ω 4 to 20 mA output loop • Operating current: > 0.1 mA Use TxConfig SIG-008 to program it to your require- • Overload: < 40 mA; < 32 Vdc ments or if you like we can program it for you at no • Response time: 2 ms @ RL= 250 Ω • Isolation: 3000 Vac / 10 s; 240 Vac continuous extra charge • EMC: EN 61326-1 • Ambient temperature range: -20 to + 75 °C IP40 Price Each 1 5+ • Wire gauge for connections: 0.14 to 1.5 mm² SIG-001 TxBlock Non-isolated head mount trans- $89.00 less 10% mitter Price Each 1 5+ SIG-004 TxIsoBlock isolated head mount transmit- $139.00 less 10% ter SIG-201 TxIsoloop-1 single loop isolator $129.00 less 10%

SIG-008 SIG-008 Txconfig USB interface cable $89.00 less 10% SIG-202 TxIsoloop-2 Dual loop isolator $219.00 less 10% for PC Temperature Transmitters TxIsoPack-USB TxRail Programmable Current Output The Novus Automation TxIsoPack-USB is a fully isolated 4 to 20 mA two The TxRail is a programmable DIN rail mount 2-wire loop 4 to 20 mA wire, loop-powered temperature transmitter for in-head assembly. A micro output temperature transmitters. One single model can be configured to USB port makes direct configuration simple. Windows software can be accept several thermocouple types and Pt100 RTD input. used to select the sensor type (thermocouples, PT100 RTD and 0 to 50 mV sensors are supported) and program the measurement range and zero Specifications: offset calibration. The transmitter is galvanically isolated to 1.5 kV, provid- -- Programmable input: thermocouples type ing signal stability and safe installation. J,K,T,N,E,R,S,B, and Pt100 RTD, 10 V and 0 to 50 mA Features: -- Power supply: 12 to 30 Vdc • Programmable Input: - 2 or 3-wire Pt100 with linearization - -- Thermocouples B, E, J, K, R, S, T, N -- Isolation: 1500Vac between sensor input and 4 to - 2, 3 or 4 wire Pt100 RTDs 20 mA output loop - -- 0 to 50 mV -- Accuracy: +-0.2% full scale for Pt100 and 0.3% max. of FS for thermocouples. • 4 to 20 mA loop powered • 12 bit output resolution (0.004 mA) Use TxConfig SIG-007 or SIG-008 to program it to your • 1,000 V Galvanic Isolation requirements or if you like we can program it for you at no extra charge • Internal protection against reversed power voltage polarity • Internal cold junction compensation for Price Each 1 5+ thermocouples

SIG-002 TxRail Non Isolated DIN mount 4 to 20 $99.00 less 10% Price Each 1 5+ mA SIG-010 Temperature transmitter TxIsoPack-USB $139.00 less 10% SIG-003 TxRail Non Isolated DIN mount 0 to 10 $99.00 less 10% V Module

Page 112 Ocean Controls Catalogue 2012 OCEANSIGNAL CONDITIONERSCONTROLS

DIN Rail and Head Mount HART Temperature Transmitters Dual Frequency to Analog Converter The TxIsoRail-HART is a high performance temperature transmitter which Our Dual frequency to analog converter allows you to easily convert up convert RTDs, thermocouples and voltage signals into a 4 to 20 mA cur- to two frequency signal streams to an analog voltage signal.The KTA-245 rent along with a superimposed HART protocol digital communication. is not designed for unlimited frequencies but for most applications it is Complete configuration, calibration and parameters monitoring can be suitable. 60 kHz is combined maximum frequency of the two frequency fully achieved through the two-wire current loop by means of a convenient inputs. ie. PC software and USB interface called TxConfig-HART. If channel 1 is 6 kHz you cannot use channel 2, but if channel 1 is 40 kHz Sensor type input is fully programmable for most relevant RTDs, ther- the maximum for channel 2 is 20 kHz. Realisti- mocouples, variable resistors, and voltage in mV. High isolation between cally, most signals will be in the 10 kHz or below input and output drastically improves stability and reliability with greater range. To set up the two ranges of the analog immunity to electromagnetic noises in extremely harsh industrial environ- outputs there are four switch blocks on the PCB. ments. A rotary switch sets the base frequency and a dual DIP switch sets the multiplier. For ease Features of installation, the KTA-245 unit can be sup- • Programmable Input: plied with DIN rail mounting clips, this has part -- Thermocouples B, E, J, K, R, S, T, N number KTD-245. -- Pt100, Pt500, Pt1000 -- Cu50, Cu100 -- Ni100, Ni500, Ni1000 (5000 ppm / K) Price Each 1 5+ -- Ni100, Ni500, Ni1000 (6180 ppm / K) -- 0 to 400 Ω, 0 to 2000 Ω, 0 to 10 KΩ KTA-245 Dual frequency to voltage converter $99.00 less 10% -- 10 to 75 mV, -100 to 100 mV, -100 to 500 mV, -100 to 2000 mV KTD-245 Dual frequency to voltage converter (DIN $129.00 less 10% • User programmable working range rail mount) • 2-wire loop powered 4 to 20 mA output • 2, 3 or 4-wire RTD and thermocouples with linear output • Programmable sensor failure detection for upscale or downscale Isolated Load Cell 4 to 20 mA Transmitter Our load cell or strain gauge transmitter provides a 10 V excitation to your Programming software comes with the TxIsoBlock and TxIsoRail units, load cell. The output of the load cell is then converted to a 4 to 20 mA or but requires either a serial or USB programming cable. The latest version 0 to 10 V signal of the TXConfig software can also be downloaded directly from the Novus website. Features: • Converts Load Cell Output • Surge test of 2,000 VAC • Accuracy: ±0.1% F.S • Zero Adjustment: ≤±5% F.S. • Span Adjustment: ≤±10% F.S. • Output Response Time: 15 bit • Output Response Time: < 250 ms • Output Ripple: ≤±0.1% F.S. • Isolation: Input / Output / Power / Case • Temperature Coefficient: 100 ppm/ºC • Operating Temperature: 0 to 60 ºC • Power Supply: 24 VDC Price Each 1 5+ • DIN Rail Mounting SIG-020 Temperature Transmitters TxIsoRail-HART $219.00 less 10%

SIG-021 Temperature transmitters TxIsoPack-HART $199.00 less 10% Price Each 1 5+

SIG-022 Tx Configurator Hart $299.00 less 10% ALT-401 ALT-LL4-C- 1 mV/V Signal Isolated, 4 to $129.00 less 10% 20 mA transmitter

ALT-402 ALT-LL5-C-1 2 mV/V Signal isolated, 4 to $129.00 less 10% Isolated K Type Thermocouple Transmitters With Display 20 mA transmitter

These DIN rail mount isolators take 4 to 20 mA or K-type thermocouple in ALT-403 ALT-LL6-C-1 3 mV/V Signal isolated, 4 to $129.00 less 10% and provide one or two isolated 4 to 20 mA outputs. 20 mA transmitter

They feature a 4.5 digit programmable display that can show the trans- ALT-404 Isolated load cell 1 mV/V, 0 to 10 V $129.00 less 10% mitted value in engineering units. The span and zero of the output signal transmitter can be adjusted digitally over a wide range. ALT-405 Isolated load cell 2 mV/V, 0 to 10 V $129.00 less 10% Features: transmitter • 0.1% Full scale accuracy • 4.5 digit, 10.16 mm tall red LED Display ALT-406 Isolated load cell 3 mV/V, 0 to 10 V $129.00 less 10% • 16 bit high resolution output transmitter • Wide voltage range (18 to 60 VAC/VDC) input power • Three-way, 2 kV isolation Isolated 4 to 20 mA Transmitters With Display • DIN Rail Socket Mounting These DIN rail mount isolators take 4 to 20 mA input and provide one or • Response time < 250 ms two isolated 4 to 20 mA outputs.They feature a 4.5 digit programmable • 50 mm wide × 100 mm high × 85 mm deep display that can show the transmitted value in engineering units. The span Specifications: and zero of the output signal can be adjusted digitally • CJC Traceability: <±0.5 °C over a wide range. • Sampling Rate: 10 Hz Features: • Input Offset Range: ±99.9 °C • 0.1% Full scale accuracy • Display Range: ±19999 with adjustable decimal point • 4.5 digit, 10.16 mm tall red LED Display • Analog Output Resolution: 16 bit • 16 bit high resolution output • Zero (Offset) Range: ±9999 • Wide voltage range (18 to 60 VAC/VDC) input power • Span (Scale) Range: ±9999 • Three-way, 2 kV isolation • Temperature Coefficient (0 to 50 °C): 50 ppm/°C • DIN Rail Socket Mounting • Response time < 250 ms • 50 mm wide × 100 mm high × 85 mm deep Price Each 1 5+

AXB-005 Isolated K type thermocouple in 4 to 20 $159.00 less 10% Price Each 1 5+ mA out AXB-001 Isolated 4 to 20 mA in, 4 to 20 mA out $159.00 less 10% display tans

Ocean Controls Catalogue 2012 Page 113 OCEANTEST CONTROLSEQUIPMENT

Dual Output, 4 to 20 mA Isolated Transmitter with Mini size AC Current Transmitter Display The AC current transmitters convert 0 to 5 A AC current to either 0 to 10 The AXB-020 is a 4 to 20 mA input, dual 4 to 20 mA isolated transmitter. It VDC/ 4 to 20 mA DC signal. Making them suitable for use with current features 4 way 2 kV isolation (input/ output 1 output 2/ supply) and a 4.5 digit transformers with 0 to 5 A AC current output. All have span and zero ad- programmable display. The display can be programmed to show the 4 to 20 justments trimpots can be accessed under rubber plugs on th coditioner's mA signal in engineering units. The span and zero of the output current can be body. adjusted over a wide range digitally. Analog calibration controls allow fine tuning of the tracking between the two outputs. **NOTE** These transmitters have NO INBUILT ISOLATION between input and output. A direct connection to an AC main current Features: signal is NOT recommended. • 0.1% Full scale accuracy • 16 bit high resolution DAC Features: • Wide voltage range (18 to 60 • 3-wires 0 to 10 VDC output (2 metres cable) VAC/DC) input power • Backed with double-sided tape for flexible • Plugs into a socketed DIN rail placement Base • ±0.25% full scale accuracy • High stability • Supply Voltage from 14 to 30 VDC • Low cost and high stability • Dimension : 52 × 22 × 18 mm.

Price Each 1 5+

AXB-020 Dual output 4 to 20 mA analog isolated $219.00 less 10% Price Each 1 5+ transmitter with display AXS-510 Mini Size 0-5A AC input and 4-20mA DC $79.00 less 10% AXB-030 Dual output 4 to 20 mA analog isolated $189.00 less 10% output transmitter transmitter without display AXS-515 Mini size 0-5A AC input and 0-10 VDC $79.00 less 10% output transmitter Load Cell, 4 to 20 mA, Isolated Transmitter

These Load Cell Isolated Transmitter features a 3 way 2 kV isolation (in- Isolated Potentiometer Transmitter put/output 1/supply), a 10 VDC excitation voltage to power the load cell and a 5 digit programmable display. The display can be allows technicians The ALT-410 isolated transmitter converts the position of 500 to 10 kΩ to easily view the input signal and determine if a fault has occurred. Din potentiometer to a 4 to 20 mA signal. rail mountable. Features: Features: • Measuring Potentiometer position • Inputs 2 mV/V or 3 mV/V, Output 4 to 20 mA • Surge test of 2,000 VAC/ min • 0.05% (±1 Digit) Full scale accuracy • High stability, non-flammable case (PC), high safety • 16 bit high resolution DAC • Accuracy: ±0.1% F.S. Potentiometer • Wide voltage range (18 to 60 VAC/DC) input power • Output: 4 to 20 mA Standard 0 to 5 V, 0 to 10 V optional • RS-485 Modbus Connection • Zero Adjustment: ≤±5% F.S • 1 or 2 Alarm Relays (Optional) • Span Adjustment: ≤±10% F.S. • High stability • Output Response Time: 15 bit • CE EMC certification • Output Response Time: <250 msec (0~90%) • Output Ripple: ≤±0.1% F.S. • Isolation: Input / Output / Power / Case • Power Supply: DC 24V Price Each 1 5+ • DIN Rail Mounting AXB-060 Load Cell Isolated Transmitter 2 mV/V $259.00 less 10% input and 4 to 20 mA output Price Each 1 5+ AXB-061 Load Cell Isolated Transmitter 3 mV/V $259.00 less 10% ALT-410 AT-PP1-C-1-500 to 10 kΩ Signal Isolated $129.00 less 10% input and 4 to 20 mA output transmitter Mini Load Cell Transmitter Test Equipment These tiny load cell or strain gauge transmitters measure just 52 × 22 × 18 mm. They provide a 5V excitation to your load cell and the output of Digital Function Generator the load cell is then converted to a 4 to 20 mA signal. All have span and zero adjustments trimpots can be accessed under rubber plugs on th This digital function generator has an in-built frequency counter, as well coditioner's body. as functioning as a standard waveform generator with sinusoidal, triangle and square wave outputs. Features: • 3-wires 0 to 10 VDC or 4 to 20 mA output (2 Features: metres cable) • Output frequency is adjustable between 0.03 Hz to 3 MHz via front • Backed with double-sided tape for flexible panel rotary dial over seven ranges. placement • DC offset adjustment allows the waveform to be shifted above or • ±0.25% full scale accuracy below 0 V. • Supply Voltage from 14 to 30 VDC • Output amplitude is adjustable from 0 to 10 V p-p via front panel • Low cost and high stability control, with a switchable -20 dB attenuator. • It has an external sync output for synchronising other test equipment to the signal generator. Price Each 1 5+

AXS-500 Load cell 2 mV/V input and 4 to 20 mA $99.00 less 10% output transmitter

AXS-501 Load cell 3 mV/V input and 4 to 20 mA $99.00 less 10% transmitter

AXS-502 Load cell 2 mV/V input and 0 to 10 VDC $99.00 less 10% output transmitter Price Each 1

AXS-503 Load cell 3 mV/V input and 0 to 10 VDC $99.00 less 10% MET-105 Function digital generator $312.73 output transmitter

Page 114 Ocean Controls Catalogue 2012 OCEANTEST CONTROLSEQUIPMENT

Function Generator Kit Clamp Meter AC/DC True RMS 600 A This kit is based around the XR-2206 monolithic function generator IC, This rugged & versatile autoranging digital clamp meter quickly and ac- and can produce sine, triangle, and 5 V square waves with frequencies curately measures the current flowing through an individual conductor. ranging from 15 Hz to over 500 kHz. Simply clamp the jaws around the conductor and the display reads the DC or AC current present, up to a massive 600 A. Activating the Peak Hold There are two selectable frequency ranges as well. When the 'FREQ' button will display the highest current reading obtained during the test. switch is set to Low, the frequency can be adjusted from 15 Hz to Features a “one touch” zero adjustment for DC current measurement and 4.5 kHz. In the High position, the frequency can go from 3 kHz to about Data Hold function to freeze the display while measuring. 650 kHz. Two pots are used to adjust the frequency, providing both coarse and fine adjustments. The XR-2206 can emit frequencies from 0.01 Hz It also features autoranging AC/DC volts and current, resistance, tem- up to 1 MHz, if you need a frequency that this kit doesn't provide, we've perature, capacitance ranges plus a diode and continuity broken out a couple extra resistors (R8, and R9), to give you the ability to test function. An essential piece of test gear for high voltage customize your kit. technicians, instrument fitters and other electrical trades- people. Supplied with high quality test leads, temperature The XR-2206 requires a relatively high voltage for normal operation, this probe, and carry case. kit has it running at 12 V. This means you'll need at least ~14 VDC (no greater than 35 V though!) to get the kit run- Features: ning at the optimal 12 V. • One touch zero function 33mm jaw opening • DC voltage: 400 mV,to 600 V • AC voltage: 4 V to 600 V • Resistance: 0 to 40 MΩ • Continuity: 50Ohm threshold, audible tone • Diode test: Test current 1mA max • Temperature: -20°C to 760°C • Capacitance: 40 nF to 100 µF • Display: 3.5 digit, 1999 count, backlit

Price Each 1

Price Each 1 MET-111 Clamp Meter AC/DC True RMS 600 A $108.18

SFK-001 Function generator kit $39.00 USB Interface Multimeter SFK-002 Function generator kit assembled $49.00 MET-050 Multimeter Auto Ranging USB Datalogger DMM An autoranging multimeter featuring an optically isolated USB interface and Windows® Network Cable Tester and DVM software. The optical adaptor ensures the DMM is electrically isolated from Two instruments in one. Ideal for network installers or technicians and the PC, so no damage can occur to the computer should there be a fault allows the user to easily check cable integrity or measure AC & DC volt- in the circuit under test. Continuity buzzer & diode check. age, current, resistance, and continuity etc. without needing to carry two It also measures temperature, frequency, capacitance, AC/DC voltage & separate devices. The unit will check for cable continuity, open-circuits, current up to 10A. Includes PC software, high quality rubber insulated test short-circuits, and cross-connects etc. A remote terminator is included leads, temperature probe and is housed in a shock-proof rubber coated and enables the user to check network cables at a wall jack or patch case. Data Acquisition: The USB interface and software allows you to log panel. Supplied with loop back cable, LAN terminator, and store measurements for later analysis. This is particularly useful for and multimeter leads. monitoring the performance of battery chargers or dischargers, timed LAN tester specifications: circuits or other quantities that change with time. Suits Windows® XP & • LAN tester checks faults & miss wired conductors Vista. • Manual or automatic testing Features: DMM Specifications: • DC voltage: 400 mV to 400 V • 600 volt max input; 200 mA AC/DC • AC voltage: 400 mV to 750 V • 20 MΩ resistance; 3.5 digit • DC current: 400 µA to 10A • Diode test, Data Hold andMax hold • AC current: 400 µA to 10A • Resistance: 400Ω to 40 MΩ • Frequency: 100 Hz to 30 MHz Price Each 1 • Duty Cycle: 0.1% to 99.9% • Capacitance: 40 to 200 µF MET-002 Network cable tester and DVM $90.86 • Continuity: <50 Ω, Audible tester • Diode test: Test Current ˜1 mA • Display: 3.75 digit LCD, 4000 count Digital AC Clamp Meter & DMM Compact and durable, this digital clamp meter provides accurate non- contact AC current measurement up to 400 A. Fits snugly into one hand Price Each 1 with thumbwheel function selector allowing simple operation just about MET-050 Relative humidity and temperature meter $99.00 anywhere! Includes the functionality of a typical standard DMM but with the addition of a non contact AC voltage detector. Very useful when locat- ing or working on live equipment. The hold button will freeze the display Auto Ranging Datalogger DMM with Backlight on the last measured reading. It also features autoranging AC/DC volts and current, resistance, temperature, capacitance ranges plus This top quality auto ranging meter is capable of logging measurements a diode and continuity test function. An essential piece of test to an internal memory for later review. A backlight is provided allowing gear for high voltage technicians, instrument fitters and other you to work in low light. It samples at a rate of 3 measurements per sec- electrical trades people. Supplied with high quality test leads, ond for up to 11 minutes of recorded data. Includes high quality rubber temperature probe and poromeric carry case insulated test leads and is housed in a shock-proof rubber coated case. Resistance, Capacitance, AC/DC Voltage and current Features: up to 10 A measurement. Continuity buzzer and diode • DC voltage: 400 mV to 600 V check, bar graph display, min/max recording. • AC voltage: 4 V to 600 V • Resistance: 400 Ω to 40 MΩ Features: • Continuity: Audible tone • Push button controls • Diode test:Test current 0.3 mA typical • Duty cycle % range • Temperature: -20 °C to 760 °C • Data hold and relative modes • Capacitance: 40 nF to 100 µF • Frequency measurement • Display: 4 digit LCD, 4000 count, backlit • Time & date display

Price Each 1 Price Each 1 5+

MET-110 Digital AC clamp meter and DMM $63.59 MET-051 Auto ranging datalogger DMM with $69.95 less 10% backlight

Ocean Controls Catalogue 2012 Page 115 OCEANTEST CONTROLSEQUIPMENT

4 to 20 mA Loop Powered Calibrator with Standard/Backlit CC421-Current Voltage Calibrator Display This current/voltage calibrator has a 0.25% +1d measurement accuracy. The KTA-266 is a 2 wire 4 to 20 mA loop powered current calibrator It is capable of power and current measurement of 2-wire designed to make testing 4 to 20 mA loops simple. The switch and po- loop. It comes with a soft carry case and battery. tentiometer are used to select 4 mA, 20 mA or any value in between. The Features: display can be calibrated to show values in engineering units. • Current Source: 0 to 24 mA, 2 ranges Features: • Current Measurement: 0 to 24 mA, 2 ranges • Banana Socket Binding Post Connections • DC mV Source: ±199.9 mV • 40 V Maximum Loop Voltage • Current calibrator drives loads up to 500 Ω • Sturdy Enclosure • 13 mm LCD display • LED Display (KTA-266) • Sampling Time: Approx 0.4 seconds • LCD Display Option (KTB-266) • Dimensions: 185 × 78 × 38 mm

Price Each 1

Price Each 1 LUT-001 CC-421 Current and Voltage calibrator $233.00

KTA-266 4 to 20 mA Loop Powered Calibrator with LED Display $129.00 Digital Tachometer Laser Photo/Contact KTB-266 4 to 20 mA Loop Powered Calibrator with LCD Display $129.00 From Lutron, this tachometer uses one chip LSI circuit & crystal time base, offering a high accurate measurement & fast sampling time. This 4 to 20 mA Loop Powered Calibrator Card with DIN Rail one instrument combines Photo Tach.( RPM ) & Contact Tach. (RPM, m/ Mount min., ft/min). Its high visible LCD gives RPM precise reading with a high precision of 0.05% accuracy. The KTD-266 is a 2 wire 4 to 20 mA loop powered current calibrator designed to make testing 4 to 20 mA loops simple. With an external The use of durable, long lasting components, including a potentiometer (not included) the KTC-266 and KTD-266 can be used to strong, light weight ABS plastic housing, assures almost inject from 4 to 20 mA into a current loop. The KTD-266 clips onto stand- maintenance free performance for many years. The housing ard DIN rail. cabinet fits comfortably in either hand. Carry case and 9V Alkaline Battery included. Features: • 4 to 20 mA Injector Features: • 40 V Maximum Loop Voltage • Laser light source, long detecting distance. • Requires External Potentiometer • Wide measuring range from 0.5 to 100,000 RPM • Can be used with a potentiometer to provide a • 0.1 RPM resolution measured value < 1000 RPM. remote setpoint for PID controller. • The last value, max., value, min. value will be stored into the memory automatically & can be obtained by pressing Memory Call Button. Price Each 1 KTC-266 4 to 20 mA Loop Powered Calibrator card $79.00 Price Each 1

KTD-266 4 to 20 mA Loop Pwered Calibrator card with DIN rail $89.00 MET-005 DT-1236L digital tachometer $308.00 mount Digital Tachometer Laser Photo/Contact DC-80L Current and Voltage Calibrator From Lutron, this tachometer uses one chip LSI circuit and The DC-80L is a portable voltage and current calibrator released by crystal time base. Its high visible LCD gives RPM precise Novus. It delivers good performance at a competitive price. It measures reading with a high precision of 0.05% accuracy. and generates: 0 to 24 mA, 0 to 100 mV and 0 to 15 V signals. They are easy to use, lightweight and robust. It's powered The use of durable, long lasting components, including a by 6 AAA batteries or an external power adapter strong, light weight ABS plastic housing, assures almost (included). Comes with soft carrying case. maintenance free performance for many years. Features: Features: • Powered from batteries or an included plug • Wide measuring range : 0.5 to 100,000 RPM. pack adapter • < 1,000 RPM, 0.1 RPM resolution . • Large (20 mm tall digits) LCD display) • Memorize the last value, max., value, min. value • Can provide loop power for sensors under test • Battery and Hard Carry Case included • Passes the 1 m drop test • Low battery indication • Comes with probes and clip leads Price Each 1 MET-010 DT-2236 Digital Tachometer $276.00 Price Each 1 NOT-001 DC-80L Current and Voltage Calibrator $495.00 Digital Tachometer This easy-to-use hand held digital tachometer measures up to 99,999 Prova 123 Calibrator RPM and features a large LCD display, laser pointer, low battery indicator, and memory recall for the last displayed value, minimum value, and maxi- The Prova comes with easy key-pad operation. When a current output is mum value. It can also be switched to measure either actual RPM or total open the beeper warning is triggered. It comes with an accessories carry revolutions. It also features a DC socket for mains power (5 bag, mannual and 9 V Alkaline battery. VDC @50 mA). Supplied with carry case and 600mm reflective tape marks, which can be cut to size. Specifications: • 4 to 20 mA (1 kΩ load, 24 V loop supply) Features: • 0-100.00mV, 0 to 1.0000 V, 0 to 12.000 V ranges • Display: 5 Digits, 16 mm 0.7” LCD • K, J, E, T Thermocouples (°C and °F) • Resolution: 0.1 RPM (2.5 to 999.9 RPM), 1 RPM (over • Frequency 1 to 62500 Hz 1000 PRM) • 0.025% Basic Accuracy • Accuracy: 0.05% • 0 to 20 mA, 0 to 24 mA selectable • Battery: 4 × AA • 1 to 100% Input (mA, mV, V) • Less than 80% RH • Storage Temperature -40 to 60 °C • Dimension: 88 168 26.2 mm × × Price Each 1

Price Each 1 MET-001 Digital tachometer $72.68

LUT-002 Prova 123 callibrator $749.00

Page 116 Ocean Controls Catalogue 2012 OCEANTEST CONTROLSEQUIPMENT

Dwell Tachometer Digital Multimeter Relative Humidity and Temperature This dwell tachometer comes with a 3.5 digit LCD display This practical and convenient pocket instrument accurately measures and with automatic zero adjustment, low battery warning and displays temperature and relative humidity simultaneously. It has a meas- auto power off after 15 minutes. It is capable of measur- uring range of -10 °C to 50 °C and 5 to 95% RH with accuracy of ±3% F.S ing: dwell angle, RPM (× 1, × 10) for 4, 5, 6 and 8 cylinder for RH and ±0.2% for temperature. It is an invaluable companion for the engines, resistance and DC voltage. HVAC technicians, laboratory researchers and so forth. Auto shut-off in 20 seconds and is powered by 2 x AAA batteries It comes with a comprehensive user guide that explains how to use features such as dwell angle function, dual Specifications: point distributors, set and adjust idle speed, cylinder power • Sensors: capacitive polymer for RH and precision ther- balance test, air fuel and filter test and so forth. Probe clips mistor for °C and holster are included with the multimeter. • Respose time: 60s typical. • HI and LO memory and HOLD function. • Measures in °C and °F. • Convenient pocket clip. Price Each 1

MET-003 Dwell tachometer and DVM $54.50 Price Each 1 MET-030 Relative Humidity and temperature meter $125.00 Tempgun with Laser Sight This is TempGun PE2, the next generation non-contact infrared thermom- Power Meter eter. Higher accuracy of ±2 degrees, laser sighting, and a tighter emission By simply plugging this compact meter into a standard power profile make this new unit a must have for tighter tolerance measure- point (GPO), you are able to calculate the running costs of any ments. Just point it at any object and get the surface temperature within connected appliance. It tracks power usage and can display 1 second. It has two CR2032 batteries plus a one year warranty. instantaneous voltage or current draw. Internal batteries maintain data during mains failure. To calculate real running Features: costs, key in the local price per unit of electricity as charged • Range: (-27 °F to 428 °F) switchable to Celsius by your provider. (-33 °C to 220 °C) • Resolution: 0.1° • Field of View (D:S Ratio): 8:1 Price Each 1 • Modes: Max/Min/Lock • Emissivity: 0.05~1 adjustable MET-042 Power meter $30.90 • 40 hours continuous use battery life • Dimensions: 22 50 110 mm × × DO-5510HA Oxygen Meter Price Each 1 The DO-5510 oxygen meter has a polarographic type oxygen probe with an incorporated Temp. sensor, high precision measurement for Dissolved MET-022 Tempgun with laser sight $49.00 Oxygen(DO), Oxygen in air(O2) & Temp. measurement. Features: Infra-red Thermometer • Heavy duty dissolved oxygen probe, probe head can connect with BOD bottle. Compact, lightweight, handheld infra-red thermometer enables accurate • Automatic Temp. compensation from 0 to 50 °C for laser guided non-contact temperature measurement of any given object sensor probe (even in the dark). It features easy one hand operation and can measure • Build in “ % SALT “ & “ Mountain Height “ compensa- temperatures from -30 °C to 550 °C. Within just 0.25 seconds you'd be tion adjustment button. able to get the temperature reading of your object. It has an accuracy • Microprocessor circuit. of ±2 °C when measuring from 30 °C to 100 °C and ±2% reading when • Sampling Time: Approx 0.4 seconds measuring from 101 °C to 550 °C. • Dimensions: 185 × 78 × 38 mm • Battery and Soft Carry Case included It includes functions for minimum and maximum readings, selectable auto power off, data hold and adjustable warning alarm when temperature Price Each 1 rises or falls below user set levels. The backlit display allows easy reading in dark areas. Can display in either °C or °F. LUT-011 DO-5510A Oxygen Meter $395.00 Specifications: • Detection element:Thermopile, Optical lens:Fresnel CD-4303 Conductivity Meter • Sighting:< 1 mW laser marker • Resolution: 0.5 °C The CD4303HA Conductivity Meter is portable and provides fast accurate • Temp coefficient:±0.2% of reading or 0.2 °C (which ever is readings, it comes supplied with an ATC conductivity probe - greaterSpectral response: 6 to 14 µm nominal carry case and full operating instructions. It offers max/min • Adjust emissivity (e): 0.1 to 1.0 readins with dual display and memory recall. • Dimensions:˜ 105 × 42 × 148 mm Features: • Measurement Range: 200 uS to 20 mS. Price Each 1 • Resolution: 0.1 uS to 0.01 mS. MET-020 Infra-Red thermometer $104.55 • Measurement range of 0 to 60 °C with a ±2% accuracy

K Type Thermocouple Meter Price Each 1 LUT-010 CD-4303HA conductivity meter $236.00 A 3.5 digit LCD, handy pocket-size digital thermometer, suitable for the lab, workshop or in the field. It features an excellent measurement range from -50 to 750°C with a LX-107HA Lux Meter ±1°C accuracy and a hold function to lock the reading on the display. The LX-107HA Light Meter is portable and provides fast accurate readings, it comes with light probe - carry case and full operating Thermocouple and 9V battery included. Accepts standard K- instructions. 2000/20000/100000 Lux measurement ranges type thermocouples. It has dimension of 118 × 70 × 29 mm. Features: • Data hold, Max, Min, Zero, 2 filters Price Each 1 • Displays in Lux, Ft-candle & % Value • Tungsten, Fluorescent, Mercury, Sodium, 4 light type MET-035 Digital thermocouple $45.40 select, microprocessor circuit • Accuracy Lux Measurement ± (5% + 2d)

Price Each 1

LUT-014 LX-107HA Lux meter $168.00

Ocean Controls Catalogue 2012 Page 117 OCEANTEST CONTROLSEQUIPMENT

Digital ORP Meter DW-6091 Portable Power Analyser Comes with Remote Probe Used for oxidation/reduction DW-6091 portable power analyser offers multi-function engineering units measurement in plating baths, waste water monitoring such as; WATT, VA, Whr, Power factor, ACV, ACA, Hz. It measures true and other applications such as aquariums, beverages and RMS AC power (Watt) and appearent power (VA). Super large LCD, easy so forth. It has a measurement range of ±1,999 mV with a to read-out, display the Watt, Power factor, Voltage & Current value at 1 mV resolution and temperature range of 0 to 60 °C. the same time. Durable plastic housing case with handle. Features: Features: • Water resistance on the front panel. • Auto range. Built-in data hold function. • All function keys are used the rubber button. • Exclusive custom exclusive design LSI circuit, provides • Large LCD display. high • Hard carrying case included. • RS-232 output interface Optional Windows Software • Built-in over input indication and built-in low battery indicator • Power supply by batteries. Price Each 1

LUT-022 YK-23RP Digital ORP meter $110.00 Price Each 1

MS-7000 Moisture Meter LUT-034 DW-6091 Portable top power analyzer $292.00 A portable, easy-to-use wood moisture meter with built-in self calibration. Nine different material groups in memory, providing calibrations for about DW-6090 Desk Top Power Analyser 150 different material (wood) types. Built-in self calibration with manual Multi-functions units such as; WATT, VA, Whr, Power Factor, ACV, ACA, temperature compensation adjustment. It has RS-232 interface with 9 DCV, DCA, Hz and Ω. It measures the true RMS for AC power (WATT) and material species groups in memory. Auto-shut off and low battery indica- appearent power (VA). Super large LCD, display the Watt, Power factor, tion, plus remote pin type moisture prove for easy operation. Moisture Voltage & Current value at the same time probe, contact pins, battery & hard carrying case included Features: Features: • Accepts inductive clamp or CT input. • Data hold, Min/Max, Record & Recall functions • Peak hold & data hold function. • Humidity Range: 9 to 30% Moisture Content • Hi, low alarm setting, RS-232 Connection • Humidity Resolution: 0.1% • Humidity Accuracy: ±4% from 9 to 24% Price Each 1 • Temperature Range: 32 to 122 F / 0 to 50 C • Temperature Resolution: 0.1 F/C LUT-032 DW-6090 Desk top power analyzer $423.00 • Temperature Accuracy: ±1.5 F/ ±0.8 C

Price Each 1 VB-8201 Vibration Meter

LUT-012 MS-7000 moisture meter $206.00 It has a frequency measurement range of 10 Hz to 1 kHz, velocity range up to 200 mm/s and acceleration range up to 200 mm/s². Comes with accelerometer and Carry Case all industrial machinery vibrates. The level 4 in 1 Environment Meter of vibration is a useful guide to the condition of the machine. Poor balance, misalignment and looseness of the structure will cause the vibration The Lutron LM-8000 pocket environment anemometer meter measures level to increase and it is a sure sign that the maintenance is airflow, temperature, light and relative humidity. It has a lightweight needed. low-friction ball vane providing high accuracy at high & low air velocity. The robust case incorporates a large easy-to-read display and wrist strap. Features: Ideal for practically all conditions. It has selectable modes such as; m/s, • Sensitivity relative meet ISO 2954. fpm, moh, km/hr or knots. The data hold button freezes current measured • Supply with vibration sensor & magnetic base, full set. value. Easy to use push buttons with max/min memory. • RMS & Peak measurement. Data hold, Memory (Max. & Min) Features: • Separate vibration probe. Optional data acquisition soft- • 18mm LCD display with function indicators ware. Auto shut off saves battery life. • AAVM-8000 Has a 2 line display for 2 measured values e.g. Air velocity & Temperature and a K type thermocouple input Price Each 1 • Calibration certificates available LUT-020 VB-8201 vibration meter $436.00 • Requires 1 x PP3 9V Battery ALR-61

YK-30WA Pure Water Meter Price Each 1 A portable, easy-to-use digital pure water tester that checks LUT-015 LM-8000 environment meter $175.00 for the condition of water filters. It has measurement range of 0 to 1999 uS. Automatic temperature compensation from 0 to 50 °C with large LCD display. It is widely used in appli- PH-207HAH pH Meter cation such as water conditioning, aquariums, food process- The PH-207AH Meter is portable and provides fast accurate readings, it ing, school, industry and quality control and so forth. It also comes supplied with a pH and temperature probe - carry case and full has a data hold function. operating instructions. It offers max/min readings with dual display and memory recall. It has in-built u-P circuit with LCD display. It has an op- Price Each 1 5+ erating temperature range of 0 to 50 °C and humidity range of < 80% RH. LUT-024 YK-30WA Digital pure water tester $188.00 less 10% Measurement Ranges: -- 0 to 14 pH x .01 pH -- mV 0 to 1999 mV Humidity Salt Water Meter -- Temperature 0 to 65 °C A portable, easy-to-use digital salt water tester provide fast Features: and accurate readings with digital readbility. It can measure • pH, mV, temp., manual temp adj. between 0 to 10% salt with automatic temperature compen- • Sampling Time Approx. 0.8 second. sation for the probe. The front panel has water resistance pro- • Accuracy pH: ± ( 0.03 pH + 2 d) tection and all function keys are enclosed in rubber material.

Price Each 1 It has wide applications in water conditioning, aquariums, beverage, fish hatcheries, food processing and so forth. Sepa- LUT-013 PH-207AH pH meter $272.00 rate electrode allow easy operations.

Price Each 1

LUT-026 YK-31SA Digital salt meter $209.00

Page 118 Ocean Controls Catalogue 2012 OCEAN TOOLSCONTROLS

Sound Level Meter EMF-839 EMF TESTER c/- Two Probes & Hard Carry Case A portable, easy-to-use sound Level meter has triple range measure- The EMF-839 meters are 3 axes broadband (100 kHz - 3 ments; 30 to 80 dB, 50 to 100 dB and 80 to 130 dB with an internal 94 dB Ghz) RF and microwave measurement devices supplied with calibration. It has a rugged enclosure and ergonomically built to isotropic (tri-axial) probes to allow for measurement of total fit into the palm of your hand. exposure to RF and microwave radiation from all directions. Two probes are supplied with the meter, for low frequen- It has large, easy to read LCD display with electric condenser cies (100 kHz - 100 MHz) and high frequencies (100 MHz - 3 microphone for high accuracy and lon term stability. It has low GHz). battery indication. It comes with 9 V battery and 1/2" electric condenser. It has an operating frequency range from 31.5 Hz to Measurement units can be set to W/m^2, mW/m^2, and 8 kHz with an accuracy of ±1.5 db. V/m. The meters feature a datalogging function (manual or auto, 16000 points, sampling times between 1 second and 9 Features: hours), and an alarm to warn if a preset radiation threshold is exceeded. • Meets IEC 651 Type 2 requirements A peak-hold function allows peak values to be maintained on the LCD • Measuring Range: 35 to 130 dB (A) readout. It requires 9 V battery. • Resolution: 0.1 dB

Price Each 1 Price Each 1

LUT-030 SL-4010 sound level meter $179.00 LUT-042 EMF-839 EMF Tester c/- Two probes and hard carry $1550.00 case

EMF-819 RF EMF TESTER c/- Freq Probe & Hard Carry Case GS-5800 Leak Detector and GS-400 Ultrasonic Transmitter The GS5800 Ultrasonic Leakage Detector is designed to lo- The EMF-819 has 3 axes RF EMF with general purpose applications. cate the source of the ultrasonic emissions generated by gas, It has a frequency measurement range up to 3 GHz. air leaks. The leakage level is displayed by “Bar LED Display Features: Panel” and converted to audible sound by either internal • DC 9 V adapter input or 9 V battery buzzer or external optional earphone. Detects leaks around • 0 to 199.99 V/m; 0 to 99.999 W/m^2; 0 to 9.9999 mW/cm^2 seals, doors, gaskets & pipes etc • Accuracy: < 2 dB. • RS-232 computer interface. • Alarm setting function can warn the user if the antenna is too Price Each 1 near the strong radiation, the buzzer will sound to remind the user. LUT-046 GS-5800 leak detector $259.00 LUT-048 GS-400 ultrasonic transmitter $75.00 Price Each 1

LUT-036 EMF-819 RF EMF tester c/- Freq Probe and Hard carry $496.00 case Tools

EMF-822A EMF TESTER c/- Soft Carry Case Curved/Straight Hemostat This tester uses a 9 V battery power supply. It has an operat- 125 mm or 5” hemostats with a curved tip. We use them exclusively to ing frequency range of 30 Hz to 300 Hz. Also a EMF measuring hold small SMD parts in place while soldering. A must have for any hand range of 0.1 mGuass to 199.9 mGauss. assembly project. Features: • 13mm (0.5") LCD, 3 1/2 digits. Max. indication 199.9 • Accuracy: ±4% +3D @50/60 Hz • Sample Time: Approx. 0.4 second. • Dimensions: 131 × 70 × 25 mm Price Each 1 5+

Price Each 1 TOL-001 Hermostat Curved $9.00 less 10%

LUT-038 EMF-822A EMF Tester c/- Soft carry case $139.00 TOL-003 Hermostat Straight $9.00 less 10%

EMF-827 EMF TESTER c/- Remote Probe & Soft Carry Case Curved Tweezers The EMF tester provides a quick, reliable and easy way to measure elec- Basic 110 mm or 4.5” high-carbon stainless steel curved tweezers for tromagnetic field radiation levels around power lines, home appliances holding small components during soldering. and industrial devices. These non-magnetic tweezers are perfect for SMD components and fine adjustments. We The EMF tester is a cost effective, hand-held instrument use them extensively for hand placement of designed and calibrated to measure electromagnetic field SMD devices and general board rework. radiation at different bandwidths 30Hz to 300 Hz Band- width. Wide measuring ranges, 20/200/2,000 micro Tesla, 200/2,000/20,000 milli Gauss. It uses a 9V Battery Power Price Each 1 5+ Supply TOL-010 Tweezers curved $6.00 less 10%

Price Each 1 Stainless Steel Side Cutters/ Stainless Steel Long Nose Pliers LUT-040 EMF-839 EMF TESTER c/- remote probe and soft carry $180.00 case High quality polished stainless steel finish making them rust resistant. Springloaded action making them easier to use. Length 125 mm Decibels is a logarithmic measurement unit that is widely used in acoustic, elec-

tronics and control theory. One dB is equal Price Each 1 5+

to one tenth of a Bel, i.e 1B = 10 dB. TOL-030 Stainless steel side cutters $13.20 less 10%

TOL-020 Stainless steel long nose pliers $13.20 less 10%

Ocean Controls Catalogue 2012 Page 119 OCEAN TOOLSCONTROLS

1000V Insulated Screwdriver - 4 mm/6.5 mm Flat Blade BNC TNC F Crimp Tool to Suit RG-11 Cable A must for people who service 240 V appliances. Rated at 1000 V with Crimptool - For Foxtel F insulated shaft. Super comfortable rubberised grip. Suitable for crimping RG6 & RG11 size connectors. Heat treated chrome vanadium tips for long life. Include crimp jaws for RG6, RG11 & RG11 centre Length (mm) 100/150; Flat Blade 4/6.5 mm pin. Adjustable crimp tension. Heavy duty all metal construction. The crimptool for Foxtel has an overall diameter of 10.8 mm Price Each 1 5+ and is suitale for us with P 0486 as well as RG-59, RG-6 and Rg-11 cables

TOL-040 1000 V insulated screwdriver - 4 mm Flat $4.73 less 10% blade Price Each 1 5+

TOL-041 1000 V insulated screwdriver- 6.5 mm $5.18 less 10% TOL-052 BNC TNC F crimp tool to suit RG-11 cable $36.32 less 10% flat blade TOL-053 Crimptool-for Foxtel F $36.32 less 10%

1000 V Insulated Electrician Tool Set - 9pc Ferrule Crimping Tool This insulated toolkit is ideal for electricians, techni- HS-04WF is a ratchet crimping tool for crimping insulated cians and those working on mains powered equip- and non-insulated cable ferrules or end-sleeves Crimping ment. It includes cutters, pliers, wire strippers, 5 range: 1 to 6.0 mm^2 or 20 to 10 AWG. screwdrivers, 2 rolls of insulation tape plus a neon test driver, all in a handy carry case. Price Each 1 5+

Price Each 1 5+ HET-001 Ferrule crimping tool $27.95 less 10%

TOL-045 1000 V insulated eletrician tool set-9pc $53.64 less 10% Coaxial Crimping Tool 1000 V Insulated Screwdriver - #1/#2 Phillip Suits coaxial cable connectors. Adjustable crimp tension with ratchet action handles. Heavy duty all metal construction. A must for people who service 240 V appliances. Rated at 1000 V with Suits RG6, RG58 and RG59 insu-lated shaft. Super comfortable rubberised grip. Heat treated chrome vanadium tips for long life. Length (mm) 80/100 Phillips #1/#2 Price Each 1 5+ Price Each 1 5+ HET-010 Coaxial crimping tool $27.95 less 10% TOL-042 1000V insulated screwdriver - #1 phillips $5.18 less 10%

TOL-043 1000V Insulated screwdriver - #2Phillips $5.18 less 10% Ratchet Crimp Tool for Insulated/Non-insulated cable links Range of application: Insulated cable links+butt 1000 V Insulated Screwdriver Set - 6pc connectors. Capacity(mm^2): 0.5 to 6.0 (insulated) 1.5 to 6.0 (non-insulated) AWG: 20 to 10. It has a This set of screwdrivers is ideal for people who service length of 230 mm. 240V appliances. They are rated at 1000 V and the shaft is insulated to the tip. In-cludes 3 slotted and 2 phillips screwdrivers, plus a 240 V neon tester. Price Each 1 5+

Price Each 1 5+ HET-005 Rachet crimp tool for insulated cable links $27.95 less 10%

TOL-044 1000V insulated screwdriver set - 6 pc $20.86 less 10% HET-003 Rachet crimp tool for non-insulated cable $27.95 less 10% links

8 Piece Mini Driver Set Ratchet Crimping Tool Kit Precision screwdrivers with rotating ball bearing top ferrule. Contains 5 flat blade (2, 2.5, 3, 3.5, 4 mm) LY03C-5D Combination tools and computer line crimping and 3 phillips head drivers (#0, #1). Supplied in a tools. Crimping tool kit LY03C + 4 die set (LY-03C + 4 robust carry case. Ideal for telecommunications gear, Diesets which include LY-03B, LY-04WF, LY-26TW, LY-10) laptops etc.

Price Each 1 5+

TOL-100 8 piece mini driver set $21.77 less 10% Price Each 1 5+

Coaxial Crimp Tool T1555/T1554 HET-020 Rachet crimping tool kit $79.95 less 10% Adjustable crimp tension with ratchet action handles. Heavy duty all metal construction. Suits RG58, Fibre Optic, SMA, SMB and RG174 connectors. Suitable for We have a shop front located in Seaford, use with connectors fitted to multi-core RGB coaxial cable ie Altronics BNC P 0525 (with 5.3mm OD ferrule). The T1554 suits RG6, RG58, RG59 you're welcome to drop by and speak to our staff regarding the products of your Price Each 1 5+ interest or simply just to pick up orders. TOL-051 Coaxial crimp tool T1555 $36.32 less 10% We offer various payment methods in- TOL-050 Coaxial crimping tool T1554 $36.32 less 10% cluding: Visa, MasterCard, EFTPOS and Cash. American Express is accepted via Online ordering is available 24 hours a day, the website but not at the shop front. 7 days a week, 365/366 days a year at: www.oceancontrols.com.au

Page 120 Ocean Controls Catalogue 2012 OCEANWEATHER CONTROLS STATIONS

Weather Stations Cabled Vantage Pro2 or Pro2 Plus Integrated Sensor Suite The Integrated Sensor Suite (ISS) collects outside weather data and sends the data to a cabled Vantage Pro2 console or Weather Envoy.This VantagePro2 Weather Stations version of the ISS contains a rain collector, temperature sensor, humidity sensor, anemometer sensor. UV sensor and solar radiation sensors are The first and only weather station in its class to use frequency hopping only available with Pro2 plus. spread spectrum radio technology to transmit weather data wirelessly up to 1000’ (300 m). Typical range through walls under most conditions Temperature and humidity sensors are mounted in a pas- is 200’ to 400’ (60 to 120 m). Add wireless repeaters for distances up to sive radiation shield to minimize the impact of solar radia- 1.7 miles (2.7 km). Includes Vantage Pro2 console/receiver, integrated tion on sensor readings. The anemometer measures wind sensor suite, and mounting hardware. Integrated sensor suite includes speed and direction and can be installed adjacent to the rain collector, temperature and humidity sensors, anemometer,40’ (12 m) ISS or apart from it. The Sensor Interface Module (SIM) anemometer cable, and solar panel. contains the “brains” of the ISS. The SIM is located on the front of the radiation shield in the SIM box. The SIM col- Electronic components are housed in a lects outside weather data from the ISS sensors and then weather-resistant shelter. Sensor suite is transmits the data to your Vantage Pro2 console or Weather Envoy. solar powered. Console may be powered using the included AC-power adapter or with three C batteries (not included). Price Each 1 3+ The Vantage Pro2 Plus weather stations ECS-021 Cabled Vantage Pro2 Integrated Sensor $440.00 less 10% offer everything found on the Vantage Suite Pro2 weather stations, plus solar radiation and UV sensors. You get forecasting, on-screen graphing, and much ECS-022 Cabled Vantage Pro2 Plus Integrated $860.00 less 10% more. Quick view icons show the forecast at a glance-sunny, partly sunny, Sensor Suite cloudy, rain or snow-while a moving ticker-tape display gives more details.

The solar powered integrated sensor suite combines all the outdoor Cabled Vantage Pro2 Console sensors into one package-making setup easier than ever and improving The Vantage Pro2 series of weather stations from Davis Instruments are performance and reliability. Rain collector, anemometer, and temperature, high quality monitoring stations popular with education and research humidity, solar radiation, and UV sensors are all included. users. They're also fantastic stations for monitoring in For improved accuracy, temperature and humidity sensors are housed agriculture and industry or for serious home weather inside a radiation shield. The shield protects against solar radiation and buffs. This item is the console only. It can receive data other sources of radiated and reflected heat. Choose our standard radia- from the cabled Vantage Pro2 integrated sensor suites tion shield, or, for the utmost in accuracy, our 24-hour fan-aspirated (ECS-021, ECS-022). The console is powered using the radiation shield. included AC-power adapter (suits Australian sockets). The console provides power to the integrated sensor suite. Price Each 1 5+

ECS-001 Wireless Vantage Pro2 $770.00 less 10% Price Each 1 3+ ECS-002 Wireless Vantage pro 2 plus $1190.00 less 10% ECS-023 Cabled Vantage Pro2 Console $300.00 less 10% ECS-003 Weatherlink for Vantage Pro serial $180.00 less 10% ECS-004 Cabled Vantage Pro2 with Radiation Shield $670.00 less 10% WeatherLink for Vantage Pro USB ECS-005 Cabled vatage pro 2 plus $1090.00 less 10% USB interface for weather stations allows connection of a Vantage Vue or Pro2 console or Weather Envoy to a PC. The WeatherLink fits neatly into Cabled Vantage Pro2/Pro2 Plus Modbus Weather Station the console or Envoy, storing your weather data even when the computer is off. Kit Features: Cabled Vantage Pro2 Modbus Weather Station Kit package includes; the • See current conditions at a glance on the instant weather bulletin standard cabled Vantage Pro2 integrated sensor suite, a display-less • Graph data on a daily, weekly, monthly, or yearly basis base station (Weather Envoy), serial WeatherLink cable and our Modbus • Generate Weather Watcher reports in National gateway. Climatic Data Center (NOAA) format • Track information from multiple weather stations Cabled Vantage Pro2 Plus Modbus Weather Station Kit package includes; on the same computer using one WeatherLink for the cabled Vantage Pro2 Plus integrated sensor suite, a display-less base each weather station station (Weather Envoy), serial WeatherLink cable, our Modbus gateway, • View information from the same weather station solar radiation and UV index sensors. The solar radiation and UV index on two or more computers using an extra user sensors allow you to measure UV index, solar power hitting the ground license for each computer. Kit includes license, manual, and Windows software. and evapotranspiration. Data available: Price Each 1 5+ • Temperature and humidity where the Weather Envoy is • Temperature and humidity at the integrated ECS-016 WeatherLink for Vantage Pro USB $180.00 less 10% sensor suite • Instantaneous windspeed and 10 minute average wind speed WeatherLink for Vantage Pro Serial • Wind direction Serial interface for weather stations allows connection of a Vantage Vue or • Current barometric pressure Pro2 console to a PC or a Pro2 console via our GWY-141 to a Modbus RTU • Rain rate • Date and time of last storm and volume of network. The WeatherLink fits neatly into the console or Envoy, storing rain in last storm your weather data even when the computer is off. • Volume of rain in the last day, month and year Features: • Status of alarms • See current conditions at a glance on the instant weather bulletin • Forecast status • Graph data on a daily, weekly, monthly, or yearly basis • Time of sunrise and sunset • Generate Weather Watcher reports in National Climatic Data Center (NOAA) format • Track information from multiple weather stations on the same computer using one WeatherLink Price Each 1 3+ for each weather station • View information from the same weather station ECS-100 Cabled Vantage Pro2 Modbus weather $949.00 less 10% on two or more computers using an extra user station Kit license for each computer. Kit includes license, manual, and Windows software. ECS-101 Cabled Vantage Pro2 Plus Modbus $1349.00 less 10% weather station kit Price Each 1 5+ ECS-003 WeatherLink for Vantage Pro Serial $180.00 less 10%

Ocean Controls Catalogue 2012 Page 121 OCEANWEATHER CONTROLS STATIONS

WeatherLinkIP for Vantage Weather Stations Vantage Vue Console The WeatherLink IP lets you post your weather data The compact Vantage Vue console is loaded with features, including a directly to the internet without a PC—WeatherLinkIP backlit LCD screen and glow-in-the-dark keypad that makes viewing does all the work for you. weather data easy, day or night. Simply plug the data logger into the back of your con- Unique Weather Center feature allows you to view multiple screens of sole or Weather Envoy and connect the cable to your weather data simply and quickly. This console matches the Vantage Vue cable/DSL router. Within minutes, you'll be able to see integrated sensor suite but can also be used with wireless Vantage Pro2. your weather data live on the internet. It can be added to an existing weather station as a • Automatically upload data to third-party weather second display or to attach a WeatherLink cable. sites including Citizen Weather Observer Program, the GLOBE Pro- gram, and more. Features: • Get e-mail alerts for current weather conditions or simple alarm • Updates every 2.5 seconds conditions. • Wireless transmission up to 300 m (1,000') • Download the data to your PC for all the powerful charting, graphing, • Frequency-hopping spread spectrum radio for and analysis as our standard WeatherLink (serial or USB). With Extra continuous data transmission User License Kits, you can even download the data independently to • 22 user-selectable alarms, 12 hour forecasts multiple PCs — ideal for schools, agriculture, scientific fieldwork, and remote locations. • Barometric pressure reporting • Choose a logging interval of 1, 5, 10, 15, 30, 60, or 120 minutes. Price Each 1 3+ Price Each 1 5+ ECS-019 Vantage Vue Console $270.00 less 10% ECS-017 WeatherLinkIP for Vantage Weather $315.00 less 10% Stations Wireless Repeater for Vantage Vue/Pro2, Solar/AC Powered Vantage Vue Weather Station The Vantage Pro2 Wireless Repeater can be used with any Vantage Pro2 or Vantage Vue wireless weather station to retransmit weather data to a The new Davis Vantage Vue weather station combines Davis' legendary compatible receiver (console or Weather Envoy). accuracy and rugged durability into a compact station that's easy to set up and use. Vantage Vue includes a sleek but tough outdoor sensor array The wireless repeater is used to extend and a distinctive LCD console. the distance between one station and a receiver, or in conjunction with other repeat- Features: • Updates every 2.5 seconds ers to create a flexible network of stations • Wireless transmission up to 300 m (1,000') and repeaters. • Frequency-hopping spread spectrum radio for con- The repeater can extend a wireless signal tinuous data transmission up to 300 m line of sight. Under most con- • Solar-powered with stored energy backup ditions (some visibility but small obstruc- • Survived cyclic corrosion tests simulating wear in extreme weather environments tions) you can expect a wireless range of • 22 user-selectable alarms 150 to 220 m. • 12 hour forecasts Up to four repeaters can be "daisy chained" for even farther distance. • Barometric pressure reporting The repeater has a solar cell and requires no wiring. The AC powered repeater comes with the Australian-standard plug pack. An internal lithium Price Each 1 3+ battery runs the repeater through the night or on overcast days. ECS-020 Vantage Vue Weather Station $530.00 less 10% Price Each 1 5+ Vantage Vue Integrated Sensor Suite ECS-010 Wireless Repeater for Vantage Vue/Pro2 $270.00 less 10% The innovative ISS combines a rain collector, temperature/humidity AC Powered sensors, and anemometer/direction vane into a single unit for optimum performance and durability.This unit works with the Vantage Vue console, ECS-011 Wireless Repeater for Vantage Vue/Pro2 $310.00 less 10% Vantage Pro2 console or Wireless Envoy. (Combined ISS and console kit Solar Powered here.) Mounting hardware included; mounting pole sold separately. Features: Cabled Weather Envoy • Updates every 2.5 seconds The Cabled Weather Envoy is a weather station console without the screen • Wireless transmission up to 300 m (1,000') or buttons. It can receive data from the cabled Vantage Pro2 integrated • Frequency-hopping spread spectrum radio for continuous data transmission sensor suites (ECS-021, ECS-022.) It's fully-compatible with the Weather- • Solar-powered with stored energy backup Link modules. • Survived cyclic corrosion tests simulating wear in extreme weather environments The Weather Envoy is typically used where the • Barometric pressure reporting console display is not needed (remote monitoring stations, or where monitoring is done through a WeatherLink connected to a computer Price Each 1 3+ or our Modbus gateway.)

ECS-018 Vantage Vue Integrated Sensor Suite $320.00 less 10% It is functionally the same as the Vantage Pro2 console except that it automatically reconnects to the integrated sensor suite if power is lost Although the stock availability shown on the website is quite accurate, we still recommend that you give our office a ring Price Each 1 3+ before arrival to avoid disappointment, if ECS-024 Cabled Weather Envoy $220.00 less 10% the item(s) were to be out of stock. We accept orders in-person, phone or fax.

Page 122 Ocean Controls Catalogue 2012 OCEANWEATHER CONTROLS STATIONS

Wireless Temperature/Humidity Station Modbus-VantagePro2 Gateway The Wireless Temperature/Humidity Station measures Our Modbus to Davis VantagePro2 Weather Station relative humidity and air temperature it can be used Gateway allows you to easily connect your PLC (Pro- with any wireless Vantage Pro2 weather station, con- grammable Logic Controller), RTU (remote telemetry sole or Weather Envoy. unit) or SCADA System to a Davis Vantage Pro2 Weather Station. The sensors are mounted next to one another in the sensor interface module (SIM) to ensure a close cor- Using the Modbus RTU protocol it enables your pro- relation between relative humidity and temperature grammable controller to monitor and carry out actions readings. Relative humidity and temperature are used based on wind speed, wind direction, temperature etc. to calculate dew point. Requires serial weatherlink (ECS-003) The wireless temperature station can be sold separately with a 7.26m Features: cable. Data from up to eight stations may be viewed on a single Vantage • Connect weather station to Gateway RS-232 Com Pro2 Console/Receiver (sold separately) or Weather Envoy and Weather- Port 1 Baud rate 19200 Link. Or, for a complete set of weather data, use with a Wireless Vantage • Connect the PLC to Gateway Com port 2. Pro2 or Vantage Pro2 Plus. (You can add up to seven Wireless Tempera- • PLC Connection can be RS-232 or RS-485 ture/Humidity Stations to either of these.) • PLC Connection selectable Modbus address 1 to 16. selectable baud rate 2400, 4800,9600 or 19200 selectable parity none, odd, even • Transfer readings Outdoor Temperature, Humidity, Wind Speed, Wind Direction Rainfall (Precipitation), Barometric Pressure Indoor Price Each 1 5+ Temperature and Humidity (console), Solar Radiation Evaporative Transfer, Daily, Monthly, Yearly Rainfall ECS-025 Wireless Temp station with 7.26m cable $275.00 less 10% • Communications OK status between the weather station and gateway ECS-026 Wireless Temp/Humidity station $350.00 less 10% Price Each 1 5+

Stainless Steel NTC Temperature Probe GWY-141 Modbus to Davis vantagepro gateway $159.00 less 10% The Multi-Purpose Temperature Probe is for use with the Vantage Pro2 Wireless Soil Moisture/Tempera- ture Station. Anemometer Interface & Alarm Card The probe is designed to measure soil temperature The KTx-250 is an anemometer monitoring and alarming card. It allows in order to provide temperature compensation for the wind speed and direction to be measured with a the Watermark Soil Moisture Sensor. Up to 4 such Davis Instruments DS7911 Anemometer (ANM-001), sensors can be connected to each station. The sta- without the need for the entire weather station. Moni- tion transmits the data back to a Wireless Vantage Pro2 weather station toring of the wind speed and direction can be done via console or Weather Envoy. the analog retransmission channels with 0 to 5 V, 1 to 5 V, 0 to 20 mA or 4 to 20 mA outputs. The sensor is a precision platinum wire thermistor which produces a resistance change proportional to temperature. It is epoxy-encapsulated in As well as monitoring the speed and direction, 2 alarm a 316 alloy stainless steel body with vinyl strain relief. The 22 AWG direct relays can be programmed to activate at a certain speed or wind direction burial cable is resistant to damage from pests, moisture or UV. range, or combination of the two. Wind speed and direction can also be monitored using the Modbus protocol with either USB or 2-wire RS-485 To ensure accurate readings when measuring outdoor air temperature, the connection. All settings are set using the Modbus proto- Multi-Purpose Temperature Probe should be shielded from direct sunlight col and the provided software. and other sources of reflected or radiated heat. The KTA-250 is also available with a memory chip for logging wind speed and direction data. Up to approx 65,500 loggings can be made for any combination of Price Each 1 5+ “Instantaneous Wind Speed and Direction”, “Average ECS-015 Stainless Steel NTC Temperature Probe $55.00 less 10% Wind Speed and Direction” and “Maximum and Mini- mum Wind Speed” with logging periods of 1 second to over 2 hours.

UV-Solar-Wind Modbus Module Price Each 1 5+ The KTA-249 is an easy to use interface for a range of weather monitoring including UV, Solar, Wind and Tem- KTA-250- 12 V Anemometer interface card, No log- $179.00 less 10% perature sensors, whose readings are stored in Modbus AX ging, No LCD Holding Registers and made available for SCADA, PLC KTB-250- 24 V Anemometer interface card, No log- $179.00 less 10% or PC monitoring using the Modbus RTU protocol. BX ging, No LCD

The Davis Instruments 6490 sensors (UV Radiation KTA-250- 12 V Anemometer interface card 64K log- $349.00 less 10% Sensor and Solar Radiation Sensor) and DS18S20 sen- AL ging, No LCD sors (Digital Temperature Sensor) can be used with the KTA-249 without the need of an entire weather station unit. KTB-250- 24 V Anemometre interface card 64K log- $349.00 less 10% BL ging, No LCD The KTL-249 has all of the features of the KTA-249 with an inbuilt LCD for you to view the UV-Solar, Wind and KTL-250- 12 V Anemometer Interface Card, No log- $229.00 less 10% Temperature reading system, the optional LCD can be AX ging, With White on Blue Backlit LCD used to display the data locally. KTL-250- 24 V Anemometer Interface Card, No log- $229.00 less 10% Features: BX ging, With White on Blue Backlit LCD • Accepts Davis Instruments DS7911 Anemometer KTL-250- 12 V Anemometer Interface Card, 64K $399.00 less 10% (ANM-001) AL Logging, With White on bBue Backlit LCD • Accepts Maxim / Dallas DS18S20 Digital Temperature Sensor, KTA- 001 and EDS-001 & GJS-001 KTL-250- 24 V Anemometer Interface Card, 64K, $399.00 less 10% • Accepts various 0 to 20 mA / 4 to 20 mA Sensors BL Logging With White on Blue Backlit LCD • Accepts 0 to 30 V (Adjustable) Analog Signals for Battery and Solar power monitoring • All readings stored in Modbus Holding Registers • RS-232 and RS-485 Modbus ports The word Anemometer is derived from • 8 to 30 VDC Input Power the Greek term "anemos" meaning wind. Price Each 1 5+ It is used to describe any airspeed meas- KTA-249 UV-solar-wind modbus module $199.00 less 10% urement instrument. In 1450, Leon KTL-249 UV-solar-wind modbus module with LCD $249.00 less 10% Battista Alberti is responsible for giving the first known description to the word.

Ocean Controls Catalogue 2012 Page 123 OCEANAUDIO CONTROLS & LIGHTING

Davis Instruments DS7911 Anenometer Soil Moisture Sensor The Anemometer includes both wind speed and wind direction sensors. The Watermark Soil Moisture Sensor is an indirect, cali- The sensor is made of rugged components stand up to hurricane-force brated method of measuring soil water content. It is an winds, yet are sensitive to a light breeze. Includes sealed stainless- electrical resistance type sensor. When part of a Vantage steel bearings for long life. The range and accuracy specifications of this Pro2 weather station, the Soil Moisture/Temperature unit have been verified in wind-tunnel tests (information available upon Station converts the electrical resistance reading from request). the sensor into a calibrated reading of centibars of soil water suction with a range from 0 to 200 centibars. The A model 7911 Anemometer reported wind speeds sensor is suits the Leaf & Soil Moisture/Temperature of 175 miles per hour before its tower collapsed Station. Up to 4 such sensors can be connected to each during hurricane Andrew, 1992. In areas where station. The station transmits the data back to a Wireless Vantage Pro2 icing of the anemometer is a problem, use An- weather station console or Weather Envoy. emometer Drip Rings to deflect water from the joint between moving parts. Price Each 1 5+

Price Each 1 5+ ECS-014 Soil Moisture Sensor $60.00 less 10%

ANM-001 Davis InstrumentsDS7911 Anenometer $175.00 less 10% Audio & Lighting Davis Instruments 6490 UV Radiation Sensor Davis Instruments 6450 Solar Radiation Sensor MP3 Trigger For use with the Vantage Pro and Vantage Pro2 (Already included with Created in collaboration with Jamie Robertson, the MP3 Trigger is quite Vantage Pro Plus and Vantage Pro2 Plus.) possibly the most versatile, low-cost, low power embedded MP3 Player. ANM-002 Measures the sunburning portion of the UV spec- The board has 18 external trigger pins that will directly trigger pre- trum. Allows you to display UV index, dose rate, and daily selected MP3 tracks, and a full-duplex serial control port that provides and accumulated dose. Multi-layer filter provides a spectral full transport control, remote triggering for up to 256 response that closely matches the Erythema Action Spec- tracks, and fast real-time volume control. trum. Diffuser provides excellent cosine response. The board plays the MP3 files directly from a FAT16 ANM-003 Measures solar radiation. Also required (along microSD flash card and supports 192 Kbps stereo with an anemometer and a temperature/humidity sensor) if you wish to playback. There is also an on-board navigation switch monitor evapotranspiration. Diffuser element and housing are carefully for local access and playback of all MP3 tracks on the designed for accurate cosine response. Silicon photo diode provides good flash card. Contains a resident bootloader that enables match to solar spectrum. Two-piece housing minimizes radiation heating, firmware updates directly from the microSD card allows convection cooling of the sensor, and prevents the trapping of without requiring a hardware programmer. water or dust. Includes built-in level and 3’ (0.9 m) cable. The board uses a Cypress PSoC CY8C29466-24SXI microcontroller and a VLSI VS1053 audio codec. Board can be powered by an external wall Price Each 1 5+ wart, FTDI Basic, or raw 3.3 V input. It require power supply of 4.5 to 12 VDC with current consumption of 45 mA in idle and 85 mA in playing ANM-002 Davis Instruments 6490 UV radiation $380.00 less 10% mode. It has a FAT16 file system and 1/8" stereo jack audio out. sensor

ANM-003 Davis instruments 6450 solar radiation $190.00 less 10% Price Each 1 5+ sensor AUD-002 MP3 trigger $54.95 less 10% Wireless Leaf & Soil Moisture/Temperature Station Redback MP3/SD Tone Gen + Message Player Module Solar-powered station includes transmitter and battery inside weather-resistant shelter. Sensors are sold separately, Designed to allow custom programming, tones, messages or music for use letting you build the station that matches your needs. The in interactive displays, security, customer entry and emergency evacua- station can be added to a wireless Vantage Pro2 station tion announcements. It allows up to 8 custom MP3 tracks plus standard (ECS-001 or ECS-002) or used by itself with a wireless alert and evacuation tones. An SD (Secure Digital) card is provided with a Vantage Pro2 console/receiver (ECS-008), or Weather Envoy library of commonly used tones, messages and phrases. (ECS-009). The station has a solar cell and internal lithium battery. Features: • Custom tracks Each console or Envoy can receive data from either: • Inbuilt tone & phrase library • A single fully-populated station with 2 Leaf Wetness Sensors, 4 Soil • 12 to 24 VDC operation @300 mA Moisture Sensors, and 4 Temperature Probes, or • All connections made via screw terminal • Two partially-populated stations, one with 2 leaf wetness sensors and • Tones conform to Australian standard 2 temperature probes, and the other with 4 soil moisture sensors and • Provision for voice over in evacuation model 4 temperatures probes.

Price Each 1 5+ Price Each 1 3+ AUD-005 Redback MP3/SD Tone gen + message $169.00 less 10% ECS-012 Wireless Leaf & Soil Moisture/Temperature $300.00 less 10% player module station

20 Second Voice recorder module Leaf Wetness Sensor This voice recording module offers solid state storage Use to monitor the level of surface moisture on foliage, with and playback of a single 20 second message and can be range from 0 (completely dry) to 15 (saturated). The sensor extended up to 30 seconds with a slight degradation of is designed to plug into a Leaf & Soil Moisture/Temperature sound quality. Station. 2 such sensors can be connected to each station. The station transmits the data back to a Wireless Vantage All your recordings will be stored in a non-volatile flash Pro2 weather station console or Weather Envoy. When mois- memory with 2 button operations, REC/Play. On board ture is present, the sensor detects an electrical resistance there is an LED indicator, built in mic. No battery back change between the gold-plated elements of the grid. This up is required and requires a small power supply of 5 V. is displayed by the Vantage Pro2 console as a value between 0 (dry) and 15 (wet) Price Each 1 5+ Price Each 1 5+ KIT-363 20 second voice module $17.50 less 10% ECS-013 Leaf Wetness Sensor $140.00 less 10%

Page 124 Ocean Controls Catalogue 2012 OCEANAUDIO CONTROLS & LIGHTING

120 Second Voice recorder module 50 W Mono Hi Fi Power Amplifier Non-volatile multi message recorder using ISD chips. Just change one High power, hi-fi quality class AB audio amplifier module using a TDA7294 resistor for longer duration. IC. Provides an impressive 50 W RMS into 8 Ω or 82 W RMS into 4 Ω with only 0.1% THD. Mute and Standby are Standalone operation using just six onboard bottons. brought out to connection pads on PCB. IC has internal Record via built-in microphone or external line in. thermal protection. Speaker and line out connector. SPI interface. Space is provided on the PCB for mounting a 1.4 °C/W Features: heatsink (not provided). All components including IC • Operating Voltage: 8 to 24 VDC insulation bush, screws, nuts & washers and TO-3 silicon- • Sampling Frequency: 8 kHz impregnated insulating washer are provided. Heat sink, speaker, cables • Message Length: 120 seconds @8 kHz and ±30 V power supply not provided.

Solder pad connections. PCB: 84 × 83 mm (heatsink area of PCB is 37 × Price Each 1 83 mm but can overhang if required). KIT-189 120 second voice module as a kit $45.00 Price Each 1 5+ KTA-189 120 second voice module assembled $65.00 KIT-106 50 W Mono Hi-Fi power amplifier as kit $45.00 less 10% 10 W+10 W Stereo Amplifier Module KTA-106 50 W Mono Hi-Fi power amplifier as- $65.00 less 10% sembled The TDA2009A is a monolithic hi-fi quality audio power amplifier IC with dual class AB outputs, designed for high quality stereo applications. Kit uses the data book application circuit and gives a gain of 36dB. 135 W RMS Amplifier Module Kit It delivers 10 watts per channel into 4 Ω speakers This 135 W amplifier module produces incredibly low with a 24 VDC supply. Can be fitted into existing levels of distortion even at high power outputs. The equipment if required. Power supply required is 8 to class AB design runs much cooler than genuine class A 28 VDC. Screw terminal block connections. Heatsink amplifiers, yet performance has not been sacrificed. provided. PCB Dimension: 45 80 mm × It produces 135 W into 8 Ω or 200 W into 4 Ω with distortion levels around 0.008%. Heatsink is not supplied, we suggest the H 0545 diecast heatsink for a Price Each 1 5+ professional finish when mounted in a case.

KIT-088 10 W+10 W Stereo amplifier module as $23.00 less 10% kit Price Each 1 5+

KTA-088 10 W + 10 W Stereo amplifier module $39.00 less 10% KIT-151 135 W RMS amplifier module kit $83.59 less 10% assembled Guitar Jammer Headphone Amplifier Kit 6 to 10 W Stereo Amplifier Module Ever wanted to play your guitar through your headphones along with your This hi-fi quality class ABaudio amplifier is based on the favourite music at the same time? Well now you can with the guitar jam- TDA2005 IC with output current and thermal protection. 8 mer. Just plug the CD and guitar into this kit and to 18 VDC Supply with 1 to 2 A capability required. you can play along with the best of them. Features: Features: • Voltage Supply: 8 to 18 VDC • Low noise circuitry • THD: <0.1% • Separate CD & Guitar volume controls • S/N Ratio: >80 dBA • Frequency response: -3 db @ 30 Hz and 70 Hz • Gain: <30 dB • 9V battery operated or 9 VDC plugpack operated • Supplied with professionally finished & screened case

Price Each 1 5+ Price Each 1 KIT-143 6 to 10 W stereo amplifier module as kit $26.00 less 10% KIT-536 120 Guitar Jammer headphone amplifier kit $36.55 KTA-143 6 to 10 W stereo amplifier module as- $42.00 less 10% sembled Electret Microphone Breakout Board 50 W RMS Amplifier Module Kit Ready to add audio to your next project? This small breakout board couples a small electret microphone with a For sound quality and power at a reasonable cost you can’t go past this 100 op-amp to amplify the sounds of voice, door knocks, superb module. Built to replace widely used ETI480 module this unit has × etc loud enough to be picked up by a microcontroller’s fantastic specifications. Analog to Digital converter. Unit comes fully assembled as Features: shown. Works from 2.7 V up to 5.5 V. • Output Power: 50 W into 8 Ω; 70 W into 4 Ω. • Music Power: 77 W into 8 Ω; 105 W into 4 Ω. • Frequency Response: -1 dB at 14 Hz and 70 kHz (at 1 W). • Input Sensitivity: 0.875 V for 50 W into 8 Ω. Price Each 1 5+ • Harmonic Distortion: <0.05% from 20 Hz to 20 kHz; typically SFS-002 Electret Microphone breakout board $9.20 less 10% <0.003%. • Signal-to-Noise Ratio: -114 dB unweighted (22 Hz to 22 kHz); -119 dB A-weighted, both with respect to 50W into 8Ω. dBm refers to the power ratio in decibels, It's a • Damping Factor: >140 dB at 100 Hz & 1 kHz, with respect to 8 Ω and without PTC unit used when measuring the absolute power. thermistor. • Protection: Fuses plus “PTC Fuse” PTC Conversion Formula: thermistor. • Stability: Unconditional P = [10^(x/10)] / 1000

Price Each 1 5+

KIT-120 50 W RMS amplifier module as kit $52.24 less 10%

Ocean Controls Catalogue 2012 Page 125 OCEAN BOOKSCONTROLS

Breakout Board for VS1000D 24 VDC Multi-Level Signal Tower (Red, Yellow, Green) with This is a breakout board for the VS1000D -- a single-chip Ogg Vorbis Buzzer Option (license-free audio codec) player with USB and NAND-FLASH interfaces. Perfect for any audio application, this board works as a standalone Ogg Our flashing LED multi-level signal light Vorbis player out of the box. Just connect it to USB, drag and drop Ogg (signal tower) uses bright LEDs as a cold, Vorbis files to the device, and press play! long-life and reliable light source. An Alternatively, the board can easily be embedded in any project that needs internal circuit flashes the red, amber and audio. The 0.1” header on the side allows easy access to the control lines, green sections at approximately 1Hz. Each so the audio files can be triggered with just a couple of GPIO lines! All section can be enabled separately. LEDs control features (power, play, pause, forward, back, volume, random on/ give an expected service time of more off) are accessible. The on-board NAND flash chip behaves just like a flash than 100,000 hours and save energy. drive, and the chip can drive a pair of headphones or small speaker with Specifications: no extra power source. • Voltage: 24 VDC • Power Consumption: 6 W Features: • Housing Material: Self extinguishing PC, aluminium • VS1000D Ogg Vorbis player IC • 2 gigabit (256 megabyte) external NAND-FLASH IC Note HEL-021 has incandescent globes • 3.5mm audio jack • Playback control buttons/breakout lines: Price Each 1 5+ -- Power/ Pause / Play -- Volume control HEL-020 24 VDC Multi-level Signal tower $59.95 less 10% -- Next song / Fast Forward (Red,Yellow,Green) -- Previous Song / Rewind -- Random Play HEL-021 24 VDC Signal tower Red, Green, light $59.95 less 10% with buzzer

Price Each 1 5+ HEL-022 24 VDC Signal toward Red, Green, Yellow $64.95 less 10% AUD-001 Breakout board for VS1000D $37.20 less 10% with buzzer

LED Bulb BA9S 24 VAC/DC Books BA9S LED white bulb 24 VAC/DC powered which is suitable for our white HB2 indicators and pushbutton indicators. Making Things Talk Colors available in; White, Blue, Yellow, Green and Red. Building electronic projects that interact with the physical world is good fun. This book covers a wide range: flex sensors, Bluetooth wireless, XBee wireless, USB, networks, IR remote control, RFID, force sensitive resistors, protocols, and of course, lots of LEDs. Price Each 1 5+ Whether you need to plug some sensors in your home HEL-050 LED Bulb BA9S 24 VAC/DC Red $1.45 less 8% to the Internet or create a device that can interact wire- HEL-051 LED Bulb BA9S 24 VAC/DC Green $1.45 less 8% lessly with other creations, Making Things Talk explains exactly what you need. HEL-052 LED Bulb BA9S 24 VAC/DC Yellow $1.45 less 8% Each chapter in contains instructions on how to build HEL-053 LED Bulb BA9S 24 VAC/DC Blue $1.45 less 8% working projects that help you do just that. You will: • Make your pet’s bed send you email HEL-054 LED Bulb BA9S 24 VAC/DC White $1.45 less 8% • Make your own seesaw game controller that communicates over the Internet • Learn how to use ZigBee and Bluetooth radios to transmit sensor data Rotating Warning Light wirelessly • Set up communication between microcontrollers, personal computers, Rotating warning light using a halogen bulb. Highly efficient , and web servers using three easy-to-program, open source environ- dustproof and waterproof. Available in 3 colours: Red, Green ments: Arduino/Wiring, Processing, and PHP. and Yello. • Write programs to send data across the Internet based on physical activity in your home, office, or backyard and much more Specifications: • Working voltage: 24 VDC • Power: 10 W Price Each 1 5+ BOK-001 Making things talk $33.75 less 10% Price Each 1 5+

HEL-001 LTE-1101 24 VDC Red warning light $17.95 less 10% Electrical Engineering 101

HEL-002 LTE-1101 24 VDC Green warning light $17.95 less 10% Everything you should have learned in school, but probably didn’t! This book is great for electronics newbies, or if you just need a refresher HEL-003 LTE-1101 24 VDC Yellow warning light $17.95 less 10% course. The book approaches all of its topics in a very straight-forward, practical manner, and all the important information is summed up nicely in a “Rules-of-Thumb” section. Flashing Warning Light The book includes a CD-ROM which contains a reference library, demo Flashing warning light using LED. The LED construction results simulation software, and engineering calculators. in cool running, reliable operation with an expected service time of more than 100,000 hours and saves energy. A few of the topics covered: • What is electricity really? Specifications : • Ω’s Law • Working voltage: 24 VDC • Capacitors and Inductors • Highly efficient, dustproof, waterproof • Op-Amps • Colors available: Red, green and yellow • Microprocessor Basics • Model explain : LTE - Screw fixing • Motors • Power Supplies Price Each 1 5+ • Tools (soldering irons, oscilloscopes, etc.) • Troubleshooting HEL-005 LTE-5104 24 VDC Red warning light $19.95 less 10% • Communication Skills HEL-006 LTE-5104 24 VDC Green warning light $19.95 less 10% HEL-007 LTE-5104 24 VDC Yellow warning light $19.95 less 10% Price Each 1 5+ BOK-005 Electrical Engineering 101 $49.00 less 10%

Page 126 Ocean Controls Catalogue 2012 OCEAN BOOKSCONTROLS

Getting Started with Processing Arduino Cookbook Learn computer programming the easy way with Processing, a simple The recipes in this book provide solutions for most com- language that lets you use code to create drawings, animation, and mon problems and questions Arduino users have, including interactive graphics. Programming courses usually start with theory, but everything from programming fundamentals to working this book lets you jump right into creative and fun projects. It’s ideal for with sensors, motors, lights, and sound, or communicating anyone who wants to learn basic programming, and serves as a simple over wired and wireless networks. You'll find the examples introduction to graphics for people with some programming skills. and advice you need to begin, expand, and enhance your projects right away. Written by the founders of Processing, this book takes you through the learning process one step at a time to help Features: you grasp core programming concepts. You’ll learn how • Get to know the Arduino development environment to sketch with code -- creating a program with one a line • Understand the core elements of the Arduino programming language of code, observing the result, and then adding to it. Join • Use common output devices for light, motion, and sound the thousands of hobbyists, students, and professionals • Interact with almost any device that has a remote control who have discovered this free and educational community • Learn techniques for handling time delays and time measurement platform. • Use simple ways to transfer digital information from sensors to the Arduino device Features: • Create complex projects that incorporate shields and external modules • wood pulp construction • Use and modify existing Arduino libraries, and learn how to create • extremely low power consumption your own • 208 pages of read only data storage Price Each 1 5+ Price Each 1 5+ BOK-008 Arduino cookbook $42.95 less 10%

BOK-006 Getting started with processing $24.00 less 10% Make: Arduino Bots and Gadgets Getting Started with Arduino Want to build your own robots, turn your ideas into prototypes, or control devices with a computer? It's a snap with This valuable little book offers a thorough introduction to the open-source this book and the Arduino open source electronic prototyp- electronics prototyping platform that’s taking the design and hobbyist ing platform. Get started with six fun projects and achieve world by storm. Getting Started with Arduino gives you impressive results quickly. You'll gain the know-how and lots of ideas for Arduino projects and helps you get going experience you need to invent your own gadgets. on them right away. From getting organised to putting the final touches on your prototype, all the information you With Arduino, building your own embedded gadgets is easy, even for need is right in the book. beginners. This book will teach you the basics of embedded systems and help you build your first gadget in just a few days. Each learn-as-you-build Inside, you’ll learn about: project that follows will add to your knowledge and skills. • Interaction design and physical computing • The Arduino hardware and software development environment Features: • Basics of electricity and electronics • Experiment with Arduino • Prototyping on a solderless breadboard • Build robots and electronic projects with easy-to-follow instructions • Drawing a schematic diagram • Turn your ideas into working physical prototypes • Use Android phones as remote controls in your projects

Price Each 1 5+ Price Each 1 5+ BOK-002 Practical Arduino $15.95 less 10% BOK-010 Make: Arduino Bots and Gadgets $34.95 less 10%

Make: Electronics Practical Arduino Want to learn the fundamentals of electronics in a fun and experiential Cool Projects for Open Source Hardware demonstrates a way? Start working on some excellent projects as soon as variety of Arduino techniques in a practical context, giving you crack open this unique, hands-on book. Build the cir- you an opportunity to learn how the theory and reference cuits first, then learn the theory behind them! With Make: material applies to real-world projects. Electronics, you’ll learn all of the basic components and important principles through a series of “learn by discovery” This book provides more than just a simple series of steps experiments. And you don’t need to know a thing about to follow - it tells you why the circuit was designed that way in the first electricity to get started. place. You won’t just be a color-by-numbers painter; you’ll learn to be a true hardware craftsman and artist, able to coneptualize, design, and Get step-by-step instructions on building working devices assemble your own creations. Take these projects as inspiration and ex- that demonstrate fundamentals such as voltage, amper- amples of applying a variety of handy techniques, and then adapt them to age, resistance, inductance, and capacitance. Then tackle more complex suit your own requirements. electronics concepts, including analog/digital conversion, logic gates, and integrated circuits. Along the way, you’ll learn valuable tips and tech- Featured Projects: niques, always with clear explanations of what you’re doing and why. • Time-Lapse Camera Controller • Virtual USB Keyboard • PS/2 Keyboard Or Mouse Input • Start out by breaking things -- experiment with components and learn why you experience failure. • Security / Automation Sensors • Set up a tricked-out project space -- your own at-home work area, equipped with all of the tools and parts you’ll need for the experi- Price Each 1 5+ ments in this book • Learn about all of the key electronic components and their functions BOK-004 Practical Arduino $45.00 less 10% within a circuit through a series of clearly presented, well-illustrated experiments • Create a car alarm, holiday lights, wearable electronic jewelry, audio Getting Started in Electronics Book generators, a crystal radio, and a touch-sensitive lamp • Work with brushed DC and stepper motors to understand their princi- This book is a complete electronics course in 128 pages! ples and applications Author Forrest Mims teaches you the basics, takes you on • Learn about programmable microcontrollers by building an automous a tour of analog and digital components, explains how they robot cart that can sense its environment and avoid obstacles work, and shows you how they are combines for various If you’ve always wanted to learn electronics, but were intimidated by applications. It even includes circuit assembly tips and other books and overly-technical websites, this book is for you! 100 electronic circuits and projects you can build and test. Even if you're not new to electronics, this book makes a great shop reference. Price Each 1 5+

BOK-003 Make :electronics $40.50 less 10% Price Each 1 BOK-011 Getting started in Electronics Book $24.00

Ocean Controls Catalogue 2012 Page 127 OCEAN BOOKSCONTROLS

Making Things Move Dustyn Roberts' Making Things Move is a wonderful introduction to practical mechanics. This book teaches you the basics of building moving mechanisms through non-technical explanation, not abstract engineering theory. These straight-forward explanations, together with examples and DIY projects, will help you form a solid understanding of concepts like attaching couplers and shafts to a motor or converting rotary motion to linear motion. Jam-packed with pictures, drawings, screenshots, and down-to-Earth instruction, Making Things Move focuses on practical application with an emphasis on readily available parts, materials and processes. Features: • Practical and easy-to-understand explanations. • Discussions on modern fabrication processes such as Laser-cutting and 3D printing, and how to access them. • Over a dozen topic-focused projects and three broad-scale projects incorporating lessons form the whole book. • Shopping lists and off-the-shelf component guides for DIY projects. • Includes online component for continuing education with the book's companion website and blog.

Price Each 1 5+

BOK-009 Making things move $34.95 less 10%

Building Wireless Sensor Network Create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and XBee radios. By the time you're halfway through Rob Faludi's fast-paced, hands-on guide, you'll have built a series of useful projects, including a complete ZigBee wireless network that delivers remotely sensed data. This resource- and reference- packed book is perfect for inventors, hackers, crafters, students, hobbyists, and scientists.

Price Each 1 5+

BOK-007 Building wireless sensor networks $32.95 less 10%

SFR-270 BWSN Basics Kit $119.95 less 10%

Page 128 Ocean Controls Catalogue 2012 Terms & Conditions

Delivery Options: The website will calculate the freight cost for your goods based on the weight, volume and destination. Shipping within Australia typically costs between $7 and $15 Australian. Deliveries in Australia up to 5 kg are shipped by Express Post, Couriers Please and Toll which means if the goods are in stock you will usually receive them in 1-2 business days. We deliver by these methods as they have a tracking number system. For large packages over 5 kg there is the option of Regular Post Parcels, Express Post Parcels or Courier Parcels. We normally deliver goods to international destinations by air mail. Typical delivery times for air mail are: • New Zealand: 4 to 7 days • UK and USA 6 to 10 days • Canada and Europe: 2 weeks • South Africa 2-3 weeks We also offer expedited international delivery by Australia Post Express Courier International, ECI, DHL, Fedex or other carriers. Options and their costs are displayed as part of the checkout procedure on the website before the order is finalised. Please note all Customs Duties and Taxes if payable are your responsibility.

Goods Lost or Damages in Transit: We ship thousands of parcels a year with less than 0.1% lost or damaged. Insured international airmail packages are insured against loss. All other methods of delivery (Express Post, Courier etc.) do not normally have insurance and our responsibility for the goods ceases when the goods are handed over to the nominated carrier. Risk on the goods are passed to you when the goods leave our warehouse. If you require insurance in case of loss or damage to goods please contact our office. Not withstanding this you may have a claim against the carrier if negligence can be proven on their behalf. If you suspect your order may have arrived damaged, i.e. carton crushed or obviously dropped, take the matter up with the carrier. We recommend you do not open the parcel except in the presence of the carrier, e.g. to verify the existence of damage or otherwise.

Stock Levels: We endeavour to keep the stock levels shown on the website as accurate as possible, however, we also accept in-person, phone and fax orders. Most items we sell are kept in stock but some are ordered in a Just-in-Time process from a local supplier. Please call or email us if you need to know what we have on hand.

Paying For Items: Prices on the website can be displayed in Australian Dollars, US Dollars and New Zealand Dollars. Please note prices in US Dollars and New Zealand Dollars are only approximate. The website will charge credit cards in Australian dollars and the final exchange rate for international cards is set by your bank. By default, prices on the website are displayed in Australian dollars excluding GST. Display of prices including GST or in other currencies can be selected on the right of any page. Prices in our printed catalog do not include GST. 10% GST applies to goods delivered in Australia. The website will allow you to select from the following payment options: • Secure online payment with Mastercard, Visa or American Express • Payment by phone with Mastercard or Visa • Bank Transfer (Australian or international orders - international bank transfers are subject to a $20 surcharge) • Cheque or Money Order from an Australian based individual or company • 30 Day From EOM Account for approved customers (or Australian government organisations or Australian universities)

30 Days Account & Wholesale Customers: Company Orders (30 Days Account): If you are a company with an ABN you can apply to set up an account with us. Contact us for details. Once approved, we ship goods upon recieving your order and invoice you for payment. The invoice will go to the billing address of your account. Non payment of monies due will be cause to discontinue supply. Australian government organisations and Australian universities are automatically granted a 30 day accounts. We accept orders from these organisations by fax or email. Orders must show the organisation's letterhead. Wholesale Customers: If you are an OEM or wish to be a reseller you can apply for wholesale prices. Contact us for details. As a general guide, to qualify for wholesale rates an average trading of $300 per month is required. Each order must total $50 minimum value, excluding GST and freight. Once approved, wholesale customers are issued with a username and password for our website that will allow the purchase of items at wholesale prices. Or- ders from approved wholesale customers are also accepted by phone, fax or email.

Returns Policy: If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc. Please note: • The product returned may attract a 15% restocking fee. • The customer must pay the delivery costs. • Non standard, custom made or a specially manufactured or imported products are not returnable. • Semiconductors, books and software are not refundable

Ocean Controls Catalogue 2012 Page 129 Ocean Controls ACN 061 932 027 ABN 22 061 932 027 Factory 3/24 Wise Ave, Seaford, Vic 3198 30 DAY CREDIT ACCOUNT APPLICATION FORM. Please complete all of the information below so that we may promptly process your application for credit.

YOUR FULL BUSINESS NAME: ______

BUSINESS STRUCTURE: SOLE TRADER __ / PARTNERSHIP __ / COMPANY ____ If a Company, Your ACN ______NUMBER OF YEARS TRADING______

Names of Directors or Owners ______

Your Registered Address ______

Your Business Address ______

Your Phone Number ______Your Fax No. ______

APPROXIMATE VALUE OF YOUR ORDER $______

I on behalf of (Business Name)______hereby give Ocean Controls permission to approach the stated referees for trade reference information.

Authorized Signature ______Date _____/ ______/______Name In Block Letters______Position ______

Ocean Controls terms of payment are as per the terms and conditions attached to our quotations and by making this application, you agree to be bound by those terms & conditions.

TRADE REFERENCES.

Please note: Banks are not acceptable, as they do not disclose customer details. Petrol, Freight, Rental, Lease or Travel Accounts are not applicable. We require details of three businesses from which you regularly purchase goods or services.

Referee 1 Business Name:______Address ______Phone ( ) ______Fax. ( ) ______

Referee 2 Business Name:______Address ______Phone ( ) ______Fax. ( ) ______

Referee 3 Business Name:______Address ______Phone ( ) ______Fax. ( ) ______

Please Fax this application to Ocean Controls at (03) 9782 5517. Thank you for your application.

Phone (03) 9782 5882 Fax (03) 9782 5517 Email [email protected] Page 130 Ocean Controls Catalogue 2012 Ocean Controls Manual Order Form Ocean Controls PO Box 2191 [email protected] Seaford BC Voice: 61 3 9782 5882 Factory 3, 24 Wise Ave Fax: 61 3 9782 5517 Seaford, Vic, Australia 3198

Quantity: Item: Unit Price: Total Price:

GST 10% (Australian Residents Only): Shipping:

Total:

Shipping Name & Address: Billing Name & Address (if different): Company: Name: Address:

State: Postcode:

Phone: Email: Fax:

Name On Expira- Card: tion:

OFFICE USE - REMOVE AND DESTROY

Credit Card CVV: No:

Ocean Controls Catalogue 2012 Page 131 Ocean Controls Manual Order Form Ocean Controls PO Box 2191 [email protected] Seaford BC Voice: 61 3 9782 5882 Factory 3, 24 Wise Ave Fax: 61 3 9782 5517 Seaford, Vic, Australia 3198

Quantity: Item: Unit Price: Total Price:

GST 10% (Australian Residents Only): Shipping:

Total:

Shipping Name & Address: Billing Name & Address (if different): Company: Name: Address:

State: Postcode:

Phone: Email: Fax:

Name On Expira- Card: tion:

OFFICE USE - REMOVE AND DESTROY

Credit Card CVV: No:

Page 132 Ocean Controls Catalogue 2012 By SKU AXB-050 111 CAB-036 12 CNC-004 67 DDC-304 87 ECS-017 122 AXB-051 111 CAB-039 12 CNC-005 67 DDC-305 87 ECS-018 122 AXB-052 111 CAB-042 12 CNC-006 67 DDC307 87 ECS-019 122 A AXB-060 114 CAB-045 12 CNC-007 67 DDC-308 87 ECS-020 122 AXB-061 114 CAB-048 12 CNC-010 67 DDC-501 87 ECS-021 121 AXB-070 111 CAB-051 12 CNC-011 67 DDC-502 87 ECS-022 121 ACC-005 108 AXB-071 111 CAB-101 12 CNC-013 68 DDC-504 87 ECS-023 121 ACC-006 108 AXB-080 112 CAB-102 12 CNC-014 68 DDC-505 87 ECS-024 122 ACC-010 108 AXB-081 112 CAB-103 12 CNC-015 69 DDC-507 87 ECS-025 123 ACC-023 109 AXI-001 76 CAB-104 12 CNC-020 68 DDC-508 87 ECS-026 123 ACC-024 109 AXI-005 76 CAB-110 12 CNC-022 68 DDC-701 87 ECS-100 121 ACC-025 109 AXI-006 76 CAB-111 12 CNC-024 68 DDC-702 87 ECS-101 121 ACC-300 109 AXI-010 76 CAS-001 41 CNC-101 67 DDC-704 87 ENC-002 49 ADS-320 107 AXI-011 76 CET-001 34 CNC-102 67 DDC-705 87 ENC-003 49 ADS-326 107 AXI-020 76 CET-002 34 CNC-104 67 DDC-707 87 ENC-004 49 ALT-010 19 AXI-021 76 CET-003 34 CNC-105 67 DDC-708 87 ENC-005 50 ALT-022 78 AXI-040 77 CET-004 34 CNC-106 67 DEC-005 39 ENC-006 50 ALT-030 78 AXS-100 101 CET-005 34 CNC-107 67 DEC-015 39 ENC-007 50 ALT-040 77 AXS-101 101 CET-006 35 CNC-110 67 DEC-025 39 ENC-008 50 ALT-041 77 AXS-102 101 CET-008 35 CNC-111 67 DEC-035 39 ENC-009 50 ALT-045 77 AXS-103 101 CET-029 35 CNC-113 68 DEC-045 39 ENC-020 50 ALT-046 77 AXS-105 101 CET-030 35 CNC-114 68 DEC-100 40 ENC-021 50 ALT-050 111 AXS-106 101 CET-031 35 CNC-115 69 DEC-102 40 ENC-022 50 ALT-051 111 AXS-122 101 CET-032 35 CNC-120 68 DEC-105 40 ENC-023 50 ALT-077 78 AXS-124 101 CET-033 36 CNC-122 68 DEC-107 40 ENC-030 49 ALT-078 78 AXS-132 101 CET-034 36 CNC-124 68 DEC-120 40 ENC-031 49 ALT-079 78 AXS-134 101 CET-050 36 CNC-145 69 DEC-122 40 ENC-040 50 ALT-080 78 AXS-150 100 CET-051 36 CNC-703 68 DEC-124 40 ENC-055 50 ALT-081 78 AXS-153 100 CET-052 36 CON-001 13 DEC-126 40 ENC-060 50 ALT-082 78 AXS-155 100 CET-053 36 CON-002 13 DEC-130 40 ENC-62 50 ALT-083 78 AXS-157 100 CET-054 36 CON-003 13 DEC-200 39 ENC-100 50 ALT-084 78 AXS-160 100 CET-107 35 CON-004 13 DEI-021 38 ENC-105 50 ALT-087 78 AXS-162 100 CET-108 35 COS-0080 98 DEI-025 38 ALT-088 78 AXS-165 100 CET-109 35 COS-0081 98 DEI-027 38 ALT-089 78 AXS-500 114 CET-112 35 COS-0082 98 DEI-033 38 F ALT-090 78 AXS-501 114 CET-113 35 COS-0083 98 DEI-040 38 ALT-091 79 FAN-001 16 AXS-502 114 CGL-001 47 COS-0120 99 DEI-050 38 ALT-100 99 FAN-002 16 AXS-503 114 CGL-004 47 COS-0121 99 DEI-100 39 ALT-101 99 FAN-003 17 AXS-510 114 CGL-007 47 COS-0122 99 DEI-101 39 ALT-106 99 FAN-004 17 AXS-515 114 CGL-010 47 COS-0123 99 DEM-003 56 ALT-110 99 FAN-005 16 AXS-601 111 CGL-013 47 COS-0124 99 DEM-005 56 ALT-125 99 FAN-006 17 CGL-016 47 COS-0180 98 DEM-007 56 ALT-140 99 FAN-007 17 CGL-019 47 COS-0181 98 DEM-013 56 ALT-200 99 FAN-008 16 B CGL-022 47 COS-0182 98 DEM-015 56 ALT-350 99 FAN-020 17 CGL-025 47 COS-0183 98 DEM-017 56 ALT-401 113 BAT-002 88 FAN-021 17 CHN-007 41 COS-0184 99 DEM-019 56 ALT-402 113 BAT-003 88 FAN-022 17 CHP-007 41 COS-0185 99 DIP-001 15 ALT-403 113 BAT-004 88 FAN-023 17 CIR-001 15 COS-0186 99 DIP-002 15 ALT-404 113 BAT-005 88 FRA-002 26 CIR-002 15 COS-0187 99 DIP-010 15 ALT-405 113 BAT-006 88 FRA-003 25 CIR-003 15 COS-0300 99 DRM-001 16 ALT-406 113 BAT-007 88 FRA-004 26 CIR-004 15 COS-0301 99 DRM-002 16 ALT-410 114 BAT-008 88 FRA-005 25 CIR-005 15 COS-0302 99 DRM-003 16 ANM-001 124 BAT-009 88 FRA-006 28 CIR-006 15 COS-0303 99 DRM-004 16 ANM-002 124 BAT-100 89 FRA-007 28 CIR-007 15 COS-310 107 DRM-005 16 ANM-003 124 BOK-001 126 FRA-008 28 CIR-008 15 COS-311 107 DRM-011 16 ARD-005 26 BOK-002 127 FRA-009 28 CIR-021 15 COS-312 107 DRM-012 16 ARD-008 24 BOK-003 127 FRA-010 29 CIR-022 15 COS-313 107 DRM-013 16 ARD-010 9, 31 BOK-004 127 FRA-011 25 CIR-023 15 COV-001 17 DRM-014 16 ARD-011 26, 80 BOK-005 126 FRA-012 26 CIR-024 15 COV-005 12 DRM-015 16 ARD-012 24 BOK-006 127 FRA-013 25 CIR-025 15 COV-006 12 DRM-102 16 ARD-015 26 BOK-007 128 FRA-014 30 CMC-001 36 COV-013 17 DTC-009 4 ARD-020 28 BOK-008 127 FRA-015 27 CMC-002 36 COV-014 17 DTC-025 4 ARD-030 27 BOK-009 128 CMC-005 36 COV-015 17 DTC-045 4 ARD-040 24 BOK-010 127 CMC-006 36 COV-201 19 DTD-009 4 ARD-050 30 BOK-011 127 G CMC-020 38 COV-202 18 DTD-025 4 ARD-060 27 BPS-002 101 CMC-025 38 COV-301 11 DTD-045 4 GJS-001 95 ARD-070 31 BPS-003 101 CMC-200 41 COV-305 12 ARD-081 27 GPS-002 9 CMI-001 77 COV-310 11 ARD-091 27 GPS-003 9 CMI-005 77 CPM-001 76 E ATO-005 19 C GPS-004 9 CMI-010 77 CPM-002 76 GPS-012 10 ATO-101 19 ECS-001 121 CAB-001 12 CMS-001 95 CPM-003 77 GPS-020 10 ATO-105 19 ECS-002 121 CAB-002 12, 38 CMS-005 95 CPM-004 77 GPS-101 10 ATO-110 19 ECS-003 121 CAB-003 12 CMS-010 95 CPM-006 77 GWY-141 123 ATO-148 20 ECS-004 121 CAB-006 12 CMS-011 95 CPM-014 78 ATO-161 20 ECS-005 121 CAB-007 12 CMS-020 95 CYC-001 43 AUD-001 126 ECS-010 122 CAB-008 12 CMS-021 95 CYC-002 43 H AUD-002 124 ECS-011 122 CAB-010 12 CMS-050 94 AUD-005 124 ECS-012 124 CMS-100 93 HBD-009 81 AXB-001 113 CAB-011 12 D ECS-013 124 HBD-041 81 CAB-012 12 CMS-101 93 AXB-005 113 ECS-014 124 CMS-121 94 HBD-071 81 AXB-020 114 CAB-030 12 DDC-301 87 ECS-015 123 HBD-141 81 CAB-033 12 CNC-001 67 AXB-030 114 DDC-302 87 ECS-016 121 CNC-002 67 HBD-172 81

Ocean Controls Catalogue 2012 Page 133 HEC-001 34 HES-610 111 HSH-142 48 HSH-321 49 IPI-121 76 KTA-190 56 HEC-005 34 HES-615 111 HSH-143 48 HSH-322 49 IPI-122 76 KTA-191 60 HEC-010 34 HET-001 120 HSH-145 48 HSH-323 49 IRP-001 105 KTA-193 57 HEE-050 47 HET-003 120 HSH-146 48 HSH-324 49 IRP-004 105 KTA-194 54 HEL-001 126 HET-005 120 HSH-147 48 HSH-325 49 IRP-007 105 KTA-195 54 HEL-002 126 HET-010 120 HSH-148 48 HSH-326 49 IRP-020 105 KTA-198 55 HEL-003 126 HET-020 120 HSH-149 48 HSH-327 49 KTA-199 56 HEL-005 126 HET-070 47 HSH-150 48 HSH-328 49 KTA-201 3 HEL-006 126 HSH-001 48 HSH-151 48 HSH-329 49 K KTA-202 3 HEL-007 126 HSH-002 48 HSH-152 48 HSH-330 49 KTA-203 3 KIT-058 31 HEL-020 126 HSH-003 48 HSH-201 48 HSH-331 49 KTA-205 57 KIT-067 55 HEL-021 126 HSH-004 48 HSH-202 48 HSH-332 49 KTA-207 55 KIT-074 23 HEL-022 126 HSH-005 48 HSH-203 48 KTA-208 57 KIT-088 125 HEL-050 126 HSH-006 48 HSH-204 48 KTA-214 5 KIT-091 81 HEL-051 126 HSH-007 48 HSH-205 48 I KTA-215 5 KIT-092 79 HEL-052 126 HSH-008 48 HSH-206 48 KTA-223 23 IBE-001 66 KIT-102 56 HEL-053 126 HSH-009 48 HSH-207 48 KTA-224 7 IBE-002 66 KIT-106 125 HEL-054 126 HSH-010 48 HSH-208 48 KTA-225 22 IBE-003 66 KIT-108 23 HEL-101 105 HSH-011 48 HSH-209 48 KTA-226 7 IBE-004 65 KIT-111 43 HEN-001 14 HSH-012 48 HSH-210 48 KTA-232 21 IBE-005 65 KIT-120 125 HEN-002 14 HSH-021 48 HSH-211 48 KTA-235 33 IBE-006 65 KIT-129 41 HER-001 70 HSH-022 48 HSH-212 48 KTA-236 33 IBE-007 65 KIT-141 43 HER-002 70 HSH-023 48 HSH-221 48 KTA-237 33 IBE-008 65 KIT-142 32 HER-003 70 HSH-024 48 HSH-222 48 KTA-238 33 IBE-009 65 KIT-143 125 HER-004 70 HSH-25 48 HSH-223 48 KTA-239 33 IBE-010 65 KIT-145 4 HER-005 70 HSH-026 48 HSH-224 49 KTA-245 113 IBE-011 65 KIT-151 125 HER-006 70 HSH-027 48 HSH-225 49 KTA-246 55 IBE-012 65 KIT-154 41 HER-007 70 HSH-028 48 HSH-226 49 KTA-249 123 IBE-013 65 KIT-157 32 HER-008 70 HSH-029 48 HSH-227 49 KTA-250-AL 123 IBE-014 65 KIT-166 55 HER-010 71 HSH-030 48 HSH-228 49 KTA-250-AX 123 IBE-015 65 KIT-179 57 HER-011 71 HSH-031 48 HSH-229 49 KTA-251 24 IBE-100 66 KIT-180 32 HER-020 71 HSH-032 48 HSH-230 49 KTA-253 57 IBE-101 66 KIT-181 32 HER-021 71 HSH-041 48 HSH-231 49 KTA-254 3 IBL-001 106 KIT-189 125 HER-022 71 HSH-042 48 HSH-232 49 KTA-255 80 IBP-006 99 KIT-200 3 HER-023 71 HSH-043 48 HSH-241 49 KTA-256 80 IBP-007 99 KIT-204 3 HER-025 71 HSH-044 48 HSH-242 49 KTA-258 73 IBP-050 107 KIT-223 23 HER-030 71 HSH-045 48 HSH-243 49 KTA-259 29 IBP-100 102 KIT-255 80 HER-031 71 HSH-046 48 HSH-244 49 KTA-265 10 IBP-102 102 KIT-256 80 HER-032 71 HSH-047 48 HSH-245 49 KTA-266 116 IBP-200 106 KIT-363 124 HER-050 72 HSH-048 48 HSH-246 49 KTA-267 94 IBP-201 106 KIT-389 38 HER-051 72 HSH-049 48 HSH-247 49 KTA-269 74 IBP-202 106 KIT-536 125 HER-101 42 HSH-050 48 HSH-248 49 KTA-270 82 IBS-0050 97 KLW-008 32 HER-103 42 HSH-051 48 HSH-249 49 KTA-271 55 IBS-0051 97 KLW-015 33 HER-110 42 HSH-052 48 HSH-250 49 KTA-273 73 IBS-0100 98 KLW-021 33 HER-201 13 HSH-061 48 HSH-251 49 KTA-290 57 IBS-0120 97 KPR-001 33 HER-202 13 HSH-062 48 HSH-252 49 KTA-389 38 IBS-0121 97 KPR-002 33 HER-203 13 HSH-063 48 HSH-261 49 KTA-390 38 IBS-0122 97 KPR-003 33 HER-204 13 HSH-064 48 HSH-262 49 KTA-2411 23 IBS-0123 97 KPR-004 34 HER-205 13 HSH-065 48 HSH-263 49 KTA-2413 23 IBS-0180 98 KPR-005 34 HER-206 13 HSH-066 48 HSH-264 49 KTB-190 56 IBS-0181 98 KPR-100 89 HER-208 13 HSH-067 48 HSH-265 49 KTB-193 57 IBS-0182 98 KPR-101 89 HER-209 13 HSH-068 48 HSH-266 49 KTB-205 57 IBS-0183 98 KPR-102 89 HER-210 13 HSH-069 48 HSH-267 49 KTB-208 57 IBS-0184 98 KPR-103 89 HER-220 13 HSH-070 48 HSH-268 49 KTB-223 23 IBS-0185 98 KPR-104 90 HER-221 13 HSH-071 48 HSH-269 49 KTB-224 7 IBS-0300 98 KPR-105 90 HER-222 13 HSH-072 48 HSH-270 49 KTB-225 22 IBS-0360 98 KPR-106 90 HER-223 13 HSH-081 48 HSH-271 49 KTB-226 7 IBS-0540 98 KPR-107 90 HER-224 13 HSH-082 48 HSH-272 49 KTB-250-BL 123 IBS-1120 96 KPR-108 90 HER-230 13 HSH-083 48 HSH-281 49 KTB-250-BX 123 IBS-1121 96 KPR-109 91 HER-235 13 HSH-084 48 HSH-282 49 KTB-251 24 IBS-1180 96 KPR-110 91 HER-298 13 HSH-085 48 HSH-283 49 KTB-253 57 IBS-1181 96 KT5-255 80 HER-299 13 HSH-086 48 HSH-284 49 KTB-254 3 IBS-1182 96 KTA-001 95 HER-330 14 HSH-087 48 HSH-285 49 KTB-265 10 IBS-1183 96 KTA-058 31 HER-331 14 HSH-088 48 HSH-286 49 KTB-266 116 IBS-1300 97 KTA-067 55 HER-332 14 HSH-089 48 HSH-287 49 KTB-290 57 IBS-1301 97 KTA-074 23 HER-333 14 HSH-090 48 HSH-288 49 KTC-205 57 IBS-1302 97 KTA-088 125 HER-334 14 HSH-091 48 HSH-289 49 KTC-251 24 IBS-1303 97 KTA-102 56 HES-100 102 HSH-092 48 HSH-290 49 KTC-253 57 IBS-1360 97 KTA-106 125 HES-101 102 HSH-100 47 HSH-291 49 KTC-254 3 IBS-1410 97 KTA-108 23 HES-104 102 HSH-121 48 HSH-292 49 KTC-266 116 IBS-2300 99 KTA-111 43 HES-105 102 HSH-122 48 HSH-301 49 KTD-205 57 IBS-2301 99 KTA-141 43 HES-106 102 HSH-123 48 HSH-302 49 KTD-214 5 IBS-2400 99 KTA-142 32 HES-107 102 HSH-124 48 HSH-303 49 KTD-215 5 IBS-2401 99 KTA-143 125 HES-108 102 HSH-125 48 HSH-304 49 KTD-245 113 IPI-100 75 KTA-145 4 HES-110 102 HSH-126 48 HSH-305 49 KTD-251 24 IPI-101 75 KTA-157 32 HES-111 103 HSH-127 48 HSH-306 49 KTD-253 57 IPI-102 75 KTA-165 23 HES-112 103 HSH-128 48 HSH-307 49 KTD-254 3 IPI-103 75 KTA-166 55 HES-113 103 HSH-129 48 HSH-308 49 KTD-258 73 IPI-105 75 KTA-179 57 HES-200 104 HSH-130 48 HSH-309 49 KTD-266 116 IPI-110 75 KTA-180 32 HES-202 104 HSH-131 48 HSH-310 49 KTD-267 94 IPI-111 75 KTA-181 32 HES-204 104 HSH-132 48 HSH-311 49 KTD-269 74 IPI-120 76 KTA-189 125 HES-605 111 HSH-141 48 HSH-312 49 KTD-273 73

Page 134 Ocean Controls Catalogue 2012 KTE-254 3 LUT-011 117 MOT-270 65 PDC-008 86 POL-1112 53 PSM-021 82 KTF-254 3 LUT-012 118 MOT-280 65 PDC-011 87 POL-1135 105 PSM-022 82 KTG-254 3 LUT-013 118 MOT-281 65 PDC-012 87 POL-1182 59 PSM-029 82 KTL-249 123 LUT-014 117 MOT-301 61 PDC-061 87 POL-1187 111 PSM-030 82 KTL-250-AL 123 LUT-015 118 MOT-302 61 PDC-205 89 POL-1202 59 PSM-031 82 KTL-250-AX 123 LUT-020 118 MOT-303 61 PDC-207 89 POL-1239 15 PSM-032 82 KTL-250-BL 123 LUT-022 118 MOT-307 62 PDC-210 89 POL-1240 15 PSM-033 82 KTL-250-BX 123 LUT-024 118 MOT-308 62 PDC-212 89 POL-1241 15 PSM-034 82 KTM-108 23 LUT-026 118 MOT-312 61 PDC-215 89 POL-1252 108 PSM-035 82 KTM-198 55 LUT-030 119 MOT-400 65 PDC-217 89 POL-1266 110 PSM-036 82 KTM-207 55 LUT-032 118 MOT-455 65 PDC-220 89 POL-1267 110 PSM-037 82 KTR-157 32 LUT-034 118 MSD-001 11 PDC-222 89 POL-1350 56 PSM-038 82 KTR-180 32 LUT-036 119 MSD-002 11 PDC-240 89 POL-1377 54 PSM-039 82 KTT-157 32 LUT-038 119 MSD-005 11 PDC-242 89 POL-1392 53 PSM-040 82 KTT-180 32 LUT-040 119 MSD-010 11 PDC-245 89 POL-1393 54 PSM-051 85 KTT-181 32 LUT-042 119 NOC-301 36 PDC-247 89 POL-2311 62 PSM-052 85 KTU-108 23 LUT-046 119 PES-001 106 POL-2314 63 PSM-053 85 LUT-048 119 PES-002 106 PRG-001 51 PSM-054 85 N PES-003 106 PRG-002 51 PSM-055 85 L PES-004 106 PRG-003 51 PSM-056 85 NOD-001 8 M PES-005 106 PRG-004 51 PSM-057 85 LAJ-001 1 NOD-003 8 PES-006 106 PRG-005 52 PSM-058 85 LAJ-002 2 MAG-003 110 NOD-005 8 PES-007 106 PRG-006 52 PSM-059 85 LAJ-003 3 MAG-004 110 NOD-020 5 PES-008 106 PRG-007 51 PSM-060 85 LAJ-004 2 MED-001 9 NOD-021 5 PES-010 107 PRG-010 51 PSM-070 82 LAJ-005 3 MED-005 9 NOI-001 76 PES-011 107 PRG-013 51 PSM-071 82 LAJ-006 3 MED-010 9 NOI-003 76 PES-022 107 PRG-014 51 PSM-072 83 LAJ-011 1 MED-015 9 NOI-005 76 PES-024 107 PRG-015 52 PSM-073 83 LAJ-012 2 MED-020 9 NOP-301 69 PES-026 107 PRG-016 52 PSM-074 83 LAJ-013 2 MED-050 9 NOR-101 42 PES-028 107 PRG-020 52 PSM-075 83 LAJ-014 1 MED-055 9 NOR-103 42 PES-030 107 PRG-021 52 PSM-076 83 LAJ-015 1 MED-060 9 NOR-105 42 PID-001 37 PRG-030 52 PSM-077 83 LAJ-021 1 MET-001 116 NOR-107 42 PID-002 37 PRG-031 52 PSM-101 88 LAJ-022 1 MET-002 115 NOR-111 42 PID-003 37 PRT-001 100 PSM-102 88 LAJ-030 2 MET-003 117 NOR-113 42 PID-004 37 PRT-002 100 PSM-103 88 LAJ-031 2 MET-005 116 NOS-001 95 PID-010 37 PRT-003 100 PSM-104 88 LAJ-032 2 MET-010 116 NOS-005 95 PID-011 37 PRT-004 100 PSM-105 88 LAJ-033 2 MET-020 117 NOS-010 95 PID-020 38 PRT-005 100 PSM-106 88 LAJ-034 2 MET-022 117 NOS-015 95 PID-021 38 PRT-006 100 PSM-107 88 LAJ-035 2 MET-030 117 NOS-020 96 PID-030 38 PRT-007 100 PSM-108 88 LAJ-036 2 MET-035 117 NOS-025 96 PID-031 38 PRT-008 100 PSM-110 83 LAJ-041 1 MET-036 95 NOT-001 116 PID-040 37 PRT-009 100 PSM-112 83 LAJ-042 1 MET-042 117 NOV-010 4 PID-041 37 PRT-010 100 PSM-150 83 LCD-001 79 MET-050 115 NOV-020 3 PID-042 37 PRT-011 100 PSM-151 83 LCD-002 79 MET-051 115 NOV-021 3 PID-043 37 PRT-012 100 PSM-152 83 LCD-003 79 MET-105 114 NOV-022 3 PID-051 37 PRT-013 100 PSM-153 83 LCD-011 79 MET-110 115 NOV-400 41 PID-052 37 PRT-014 100 PSM-154 83 LCD-012 79 MET-111 115 NOV-401 41 PID-053 37 PRT-015 100 PSM-155 83 LCD-013 79 MOA-001 66 NOV-405 41 PID-054 37 PRT-016 100 PSM-156 83 LCD-032 79 MOA-002 66 NOV-406 41 PID-055 37 PRT-017 100 PSM-157 83 LCD-051 80 MOA-003 66 NOW-001 5 PID-056 37 PRT-018 100 PSM-158 83 LCD-060 79 MOA-010 66 NPT-002 100 PIR-001 105 PRT-019 100 PSM-159 83 LCD-061 79 MOA-011 66 NPT-005 100 PIR-002 105 PRT-035 100 PSM-160 83 LCD-100 80 MOA-012 66 NPT-010 100 PIR-005 90 PRT-036 100 PSM-161 83 LCD-111 80 MOA-013 66 NPT-020 100 PIR-006 90 PRT-037 100 PSM-162 83 LCD-112 80 MOA-014 66 NPT-030 100 PIX-002 23 PRT-038 100 PSM-163 83 LCD-113 80 MOA-015 66 NPT-060 100 PIX-003 23 PRT-039 100 PSM-180 86 LCD-114 80 MOT-108 63 NWS-001 7 PLP-001 86 PRT-040 100 PSM-181 86 LOG-001 7 MOT-110 63 PLP-002 86 PRT-041 100 PSM-182 86 LOG-002 7, 8 MOT-115 63 PLP-003 38, 86 PRT-042 100 PSM-183 86 LOG-003 8 MOT-116 63 O PLP-004 86 PRT-043 100 PSM-184 86 LOG-004 8 MOT-120 63 OCH-001 4 PLP-007 86 PRT-044 100 PSM-185 86 LOG-005 8 MOT-121 63 OCH-002 4 PLP-008 86 PRT-045 100 PSM-186 86 LOG-006 8 MOT-122 64 OCH-003 4 PLP-009 86 PRT-046 100 PSM-200 84 LOG-010 7 MOT-124 64 OCH-010 4 POL-207 55 PRT-047 100 PSM-201 84 LOG-0011 7 MOT-125 64 OCH-011 4 POL-391 18 PRT-048 100 PSM-512 83 LOG-020 10 MOT-128 64 OCH-012 4 POL-705 52 PRT-049 100 PSM-2512 84 LOG-0031 8 MOT-130 64 OCS-001 69 POL-706 52 PRT-050 100 PSM-2513 84 LOG-0032 8 MOT-131 64 OCS-007 70 POL-707 53 PRT-051 100 PSM-2514 84 LOG-501 10 MOT-132 64 OCS-011 69 POL-708 53 PSM-001 84 PSM-2521 84 LOG-502 10 MOT-135 64 OCS-015 70 POL-713 53 PSM-002 84 PSM-2522 84 LOG-503 10 MOT-150 64 POL-727 56 PSM-003 84 PSM-2523 84 LOG-600 11 MOT-152 64 POL-755 54 PSM-004 84 PSM-2531 84 LSW-001 105 MOT-155 64 P POL-756 54 PSM-005 84 PSM-2532 84 LSW-002 105 MOT-201 62 POL-758 54 PSM-006 84 PSM-2534 84 LSW-010 102 MOT-202 62 PDC-001 86 POL-759 54 PSM-007 84 PSM-2541 85 LSW-011 102 MOT-203 62 PDC-002 86 POL-777 53 PSM-008 84 PSM-2542 85 LSW-020 13 MOT-204 62 PDC-003 86 POL-781 89 PSM-009 84 PSM-2544 85 LSW-030 13 MOT-210 62 PDC-004 86 POL-783 89 PSM-010 84 PSM-2562 85 LUT-001 116 MOT-211 62 PDC-005 86 POL-796 89 PSM-011 84 PSM-2564 85 LUT-002 116 MOT-212 62 PDC-006 86 POL-797 89 PSM-012 84 PSM-2565 85 LUT-010 117 MOT-260 65 PDC-007 86 POL-1110 53 PSM-020 82 PSM-2572 85

Ocean Controls Catalogue 2012 Page 135 PSM-2574 85 RPD-242 73 SFJ-011 14 SMC-410 60 TOL-044 120 TRM-506 46 PSM-2575 85 RPD-244 73 SFJ-015 14 SPL-001 40 TOL-045 120 TRM-507 46 PSU-009 86 RPD-248 73 SFJ-016 14 SPL-002 40 TOL-050 120 TRM-508 46 PSU-010 86 SFJ-017 14 SPL-003 40 TOL-051 120 TRM-509 46 PSU-011 86 SFJ-018 14 SPL-004 40 TOL-052 120 TRM-510 46 PSU-012 86 S SFJ-020 14 SPL-005 41 TOL-053 120 TRM-511 46 PTP-003 4, 38 SFJ-021 14 SPL-006 41 TOL-100 120 TRM-512 46 SDC-001 87 SFJ-022 14 SPL-007 41 TOL-200 11 TRM-513 46 SDC-003 87 SFJ-023 14 SPL-008 41 TRM-007 43 TRM-514 46 SDC-005 87 R SFJ-024 14 SPL-009 41 TRM-010 43 TRM-515 46 SDC-007 87 SFJ-025 14 SPL-010 40 TRM-013 43 TRM-516 46 RHT-003 92 SDC-009 87 SFJ-030 15 SPL-011 40 TRM-016 43 TRM-517 46 RHT-004 92 SDC-011 87 SFJ-031 15 SRS-003 103 TRM-019 43 TRM-518 46 RHT-005 92 SDC-301 87 SFK-001 115 SRS-004 103 TRM-022 43 TRM-519 46 RHT-006 93 SDC-302 87 SFK-002 115 SRS-008 103 TRM-041 44 TRM-520 46 RHT-008 93 SDC-304 87 SFM-001 63 SRS-009 103 TRM-042 44 TRM-521 46 RHT-009 93 SDC-305 87 SFP-200 92 SRS-022 103 TRM-043 44 TRM-522 46 RHT-010 93 SDC-307 87 SFR-100 92 SRS-028 103 TRM-044 44 TRM-523 46 RHT-011 93 SDC-308 87 SFR-101 92 SRS-032 103 TRM-047 44 TRM-524 46 RHT-012 93 SDC-501 87 SFR-102 92 SRS-038 103 TRM-050 44 TRM-525 46 RHT-020 94 SDC-503 87 SFR-103 92 SRS-042 103 TRM-053 44 TRM-526 46 RHT-021 94 SDC-505 87 SFR-104 92 SRS-048 104 TRM-056 44 TRM-527 46 RHT-022 94 SDC-507 87 SFR-105 92 SRS-100 104 TRM-071 44 TRM-528 46 RHT-024 94 SDC-509 87 SFR-106 92 SRS-105 104 TRM-074 44 TRM-529 46 RHT-026 94 SDC-511 87 SFR-107 92 SRS-110 104 TRM-077 44 TRM-530 46 RHT-028 94 SDC-701 87 SFR-200 22 SRS-130 104 TRM-080 44 TRM-531 46 RHT-030 94 SDC-702 87 SFR-250 21 SSR-001 73 TRM-091 45 TRM-532 46 RHT-031 94 SDC-704 87 SFR-260 21 SSR-011 71 TRM-092 45 TRM-533 46 RHT-032 94 SDC-705 87 SFR-270 128 SSR-013 73 TRM-093 45 TRM-534 46 RHT-033 94 SDC-707 87 SFR-300 21 SSR-020 75 TRM-094 45 TRM-535 46 RHT-040 93 SDC-708 87 SFR-404 29 SSR-021 75 TRM-095 45 TRM-536 46 RHT-045 93 SEC-001 91 SFS-001 96 SSR-030 75 TRM-101 45 TRM-537 46 RHT-050 93 SEC-002 91 SFS-002 125 SSR-100 74 TRM-102 45 TRM-538 46 RHT-055 93 SEC-003 91 SFS-003 97 SSR-110 74 TRM-103 45 TRM-539 46 RIR-101 32 SEC-004 92 SFS-004 95 SSR-115 74 TRM-104 45 RLC-122 72 SEC-005 91 SFS-005 96 SSR-120 74 TRM-112 45 RLC-124 72 SFA-001 30 SFS-006 96 SSR-125 74 TRM-113 45 U RLC-128 72 SFA-002 29 SFS-007 96 SSR-130 74 TRM-114 45 RLC-242 72 SFA-003 30 UHB-001 11 SFS-201 110 SSR-200 74 TRM-115 45 RLC-244 72 SFA-004 30 UHB-002 11 SFS-202 109 SSR-205 74 TRM-116 45 RLC-248 72 SFA-005 31 UHB-003 11 SFS-203 109 STW-020 6 TRM-120 47 RLD-122 72 SFA-010 16 UHF-001 32 SFS-300 105 STW-025 6 TRM-121 47 RLD-124 72 SFA-011 16 UHF-002 32 SFS-400 97 STW-027 6 TRM-122 47 RLD-128 72 SFA-100 24 UHF-003 32 SIG-001 112 STW-030 6 TRM-123 47 RLD-242 72 SFA-101 25 UHF-010 32 SIG-002 112 STW-050 6 TRM-150 45 RLD-244 72 SFA-102 24 UHF-011 32 SIG-003 112 STW-060 6 TRM-160 44 RLD-248 72 SFA-103 24 USB-001 12 SIG-004 112 STW-065 6 TRM-161 44 RLY-003 71 SFA-104 25 USB-002 12 SIG-005 112 STW-070 6 TRM-165 44 RLY-004 71 SFA-201 27 USB-003 12 SIG-006 112 STW-080 6 TRM-215 45 RLY-007 71 SFA-202 31 USB-010 86 SIG-008 112 TRM-216 45 RLY-008 71 SFA-205 27 USB-011 86 SIG-010 112 TRM-217 46 RLY-009 71 SFA-301 29 SIG-020 113 T TRM-225 45 RLY-010 71 SFA-303 30 SIG-021 113 TRM-226 45 RLY-018 71 SFA-400 28 THH-007 42 V SIG-022 113 TRM-227 46 RLY-019 71 SFA-401 28 THM-007 42 SIG-100 5 TRM-230 46 VK-8055 4 RLY-020 72 SFA-402 28 TIM-010 42 SIG-101 5 TRM-231 46 VK-8055A 4 RLY-021 72 SFA-403 29 TIM-011 42 SIG-102 5 TRM-235 46 RLY-022 72 SFA-405 29 TOD-001 18 SIG-201 112 TRM-236 46 RLY-023 72 SFA-406 26 TOD-002 18 SIG-202 112 TRM-240 45 W RLY-024 72 SFB-001 30 TOD-003 19 SIG-300 40 TRM-241 45 RLY-100 70 SFC-001 110 TOD-004 18 SMC-003 58 TRM-242 46 WIR-001 21 RMC-122 72 SFC-002 110 TOD-006 18 SMC-004 58 TRM-245 46 WIR-002 21 RMC-124 72 SFC-003 26 TOD-007 18 SMC-006 58 TRM-246 46 WIR-006 21 RMC-128 72 SFC-004 80 TOD-008 18 SMC-007 58 TRM-250 46 WIR-010 21 RMD-122 72 SFC-010 31 TOD-020 20 SMC-008 58 TRM-251 46 WIR-031 21 RMD-124 72 SFC-011 31 TOD-021 20 SMC-009 59 TRM-260 45 WIR-032 21 RMD-128 72 SFC-020 31 TOD-022 20 SMC-010 58 TRM-261 45 WIR-040 22 RNC-122 73 SFC-030 15 TOD-060 20 SMC-011 59 TRM-262 46 WIR-041 22 RNC-124 73 SFC-050 30 TOD-061 20 SMC-012 59 TRM-410 16 WIR-042 22 RNC-128 73 SFC-060 108 TOD-080 20 SMC-020 59 TRM-411 16 WIR-043 22 RND-122 73 SFC-061 108 TOD-082 20 SMC-100 61 TRM-422 16 WIR-045 22 RND-124 73 SFC-070 31 TOD-100 18 SMC-102 61 TRM-425 16 WIR-046 22 RND-128 73 SFG-009 109 TOD-200 20 SMC-105 61 TRM-426 16 WIR-047 22 RPC-122 73 SFG-098 108 TOL-001 119 SMC-106 61 TRM-429 16 WIR-048 22 RPC-124 73 SFI-001 77 TOL-003 119 SMC-110 61 TRM-432 16 WIR-049 22 RPC-128 73 SFI-002 77 TOL-010 119 SMC-200 61 TRM-433 16 RPC-242 73 SFJ-001 14 TOL-020 119 SMC-201 61 TRM-500 46 RPC-244 73 SFJ-002 14 TOL-030 119 SMC-202 61 TRM-501 46 RPC-248 73 SFJ-003 15 TOL-040 120 SMC-242 60 TRM-502 46 RPD-122 73 SFJ-004 14 TOL-041 120 SMC-243 60 TRM-503 46 RPD-124 73 SFJ-005 14 TOL-042 120 SMC-245 60 TRM-504 46 RPD-128 73 SFJ-006 14 TOL-043 120 SMC-400 60 TRM-505 46 Topic RJ45 to DB9/25 13 C D RS-232 Changers 12 AirGate 5 Cable Glands 47 Data Acquisition Numerical # Alarm Kit 89 Cable Labels 46 Accessories 1, 2, 4 AM882 59 Acquisition module 1, 4 Cables Amplifier 3 1 Line LED 81 Amplifier FTDI 27 Ethernet 7 2.4GHz XBee 22 Audio 125 Programming 52 Modbus Module 5, 7 DC 3 RJ45 12 Signal-conditioning 2 2 × 16 LCD 41 Kit 125 Serial Leads 12 Temperature 3 2 Position Switch 13 Thermocouple 3 USB Extension 12 USB 1 Analog Panel Meter 77 Calibrator 116 Wireless Modules 6 3 Axis Kits 67 Data Loggers Anemometer 123 Calibrator Card 116 3 Channel LED 81 FieldLogger 8 Anemometer Card 123 Capacitive Switch 96 3 Digits Indicator 77 GPS 9 LogBox 7, 8 Antenna 10 Circuit Breakers 15 4 Axis CNC 68 Logomatic 10 Arcade Joystick 14 Clamp Meter 115 Site-Log 9 4 Digit Meter 77 Temperature Logger 7 Arduino CNC Kits 4 Line LED Display 81 USB 11 Accessories 26, 31 Accessories 68 Davis Instruments 124 4 to 20 mA Probe 93 Controller 24 Large Stepper Kits 67 5 Digit Indicator 76 Kit 26 Servo Kits 68 DC-DC Converters RTC 31 Smalll Stepper Kits 67 Dual Output 87 5 Digit Meters 76 Shields 27 Colour Sensor 106 Single Output 86 7 Port hub 11 ARM 52 Communications DCS920 60 ATEN USB 17 8 × 2 LCD 79 Converter 17, 18 DC Servo 65 Ethernet Server 19 9 Degrees 109 ATmega8U2 24 DC Speed Controller 55 Modem 21 10/100M Converter 20 ATmega16U2 24 Surge Protector 20 DC SSR Card 73 Wireless 21 10 Port Hub 11 ATmega328 24 Debugger 52 XBee 22 ATmega328P 25 15 W Switchmode 83 Compass Module 110 DHC18 42 Audio 16 × 2 LCD 79 Components DHC-19S-S 42 Amplifier 125 18F2553 30 Arcade 14 Breakout Board 125 DHT22 96 Circuit Breaker 15 20 × 4 LCD 79 Play & Record 124 DIN Rail 20 DigiGate 40 AVR Programmer 51 22-23 Enclosure 50 Fan 16 Digirail 5 LED indicator 14, 15 22-62 Enclosure 50 Potentiometer 15 Digital I/O Module 40 22-80 Enclosure 50 B Pushbutton 13 Digital Motor Drive 58 Computer Parts 32 x 16 Display 30 Digital Multimeter 117 Adapters 13 Barcode Scanner 92 70 to 150 W 65 Gender Changers 12 Digital Pressure 101 Leads 12 100 dB Siren 92 Barometric 101 Digital RC Servo 62 Port Card 11 128 × 64 Graphic LCD 79 Battery USB Hub 11 DIN Rail Coin Cell 89 150 W CNC 69 Conductivity Meter 117 Accessories 45 LiPo 88 Cutter 47 Console 121 160 × 128 Graphic LCD 79 Battery Chargers & Inverters Mounting Clips 20 180 W Motor 65 Battery Charger 88 Contact Block 13 PCB 16 Battery Holder 89 PowerSupply 82 300 W Battery Charger 88 Converters LiPoly Charger 88 Relay Base 71 Ethernet 19 Relays 71 400 W CNC 69 Bipolar Gearbox 64 Frequency 113 Terminal Labels 47 400 W Motor 65 Bipolar Stepper 64 Optical Fibre 20 Terminals 43, 44, 45 Port-Powered 18 415 VAC Switchmode 82 DM422C 58 Bit Whacker 30 Serial 21 434 MHz UHF 32 BlueSMiRF 27 SL-RS232 9 DM856 59 TTL 18 Dongle 108 1000 V Screwdriver 120 BMA180 109 USB 17 4980A Enclosure 50 Books Counters & Timers DOP Touchscreen 38 4981 Enclosure 50 Arduino 127 Cyclic Timer 42 DR-RDN20 83 Electrical Engineering 126 Digits Counter 41 DS3234 RTC 31 Electronics 127 Light Timer 42 Multi-Function Timer 42 D-Sub 4 A Bracket 63 Couplers 65 Breadboard 31 Dual Bidirectional 55 COZ100 6 A4983 59 Brushless Servo Drive 60 Dual Comparator 23 Crimp Tool 120 Accelerometer 108 Bulkhead Case 41 Dual Pushbutton 13 CRZ-2005 96 ACS606 60 Bus Pirate 52 Dust Cover 94 CT34 41 ACS806 60 Button 13 DVP 39 Current Sensor 110 AC Servo 65 DVP PLC 39 Cyclic Timer 42 Adapters E G ITG-3200 108 LJTick-Divider 2 LJTick-InAmp 2 EasyDrive 59 Game Controller 14 J LJTick-Level 2 EasyUSB 11 Gearbox Motor 62 LJTick-Proto 2

Electrical Parts Gender Changers 12 Joystick 14, 15 Load Cell 114 Accessories 45 GeoChron 10 JPEG Trigger 108 Load Cell Indicator 75 Cable Glands 47 Cable Labels 46 Glass Capsule 92 Jrk Motor Drive 53 LogBox DIN Rail Cutter 47 GPS Jumbo RC Servo 61 AA Logger 7 DIN Rail Labels 47 DA Logger 8 Antenna 10 DIN Rail Terminals 43 Jumper Wire 10 RHT Logger 8 Diode Terminal 44 Venus 9 Logomatic 10 Earth Terminals 44 GS-4200 100 Fuse & Switch Terminals GSM 33, 34 Loop Powered 94 44 K Heat Shrink 48 Gyro Board 108, 110 LPC2148 10 SpringCage 45 Keypad Controller 91 Lux Meter 117 Surge Suppression 44 EMF TESTER 119 H KitTen 26 Enclosures M Aluminium 49 Hall Effect 99 L DIN Rail 50 Maglev Fan 17 Plastic 50 HART 113 Encoder 66 HeadMount Transmitter 112 LabJack 1 Magnetic Switch 91 Environment Meter 118 Heat Shrink 47 Latching E-stop 13 Mains Outlets 32 Envoy 122 Heatsink LCD Mega Arduino 25 ePIR 105 SSR 75 7-Segment 80 MegaShield Kit 27 Basic 79 Heavy Duty Relays 71 Meter ESR2 Relays 71 Graphic 79 HMI 38 Indicator 77 AC Clamp 115 E-stop switch 13 Kit 79 Conductivity 117 HMI Cables 39 EtherMega 25 Serial 79 K Type Thermocouple 117 Lux 117 Humidity LCD & Keypad Ethernet Server 19 Oxygen 117 Data Logger 8 Colour Shield 28 Ethernet Switch 19 Power 117 Hand-held Meter 117 Shield 28 Modbus Transmitters 93 Microcontroller Programmers Evaluation Board 109 Leads Remote Sensor 93 AVR 51 Extension Lead 12 RHT Sensor 93, 96 Ethernet 12 JTAG 52 Sensor Probe 3, 93 Modem Leads 12 MPLAB 51 USB Probe 93 Serial Leads 12 PICKit 52 USB 2.0 12 F Weather Stations 121 Programming Cable 52 Wireless Transmitter 6 LED MicroSD 11 Bulb 126 Micro-stepping Controller 59 Fans I DMD 30 Finger Guards 17 Gateway 82 Microswitches 104, 105 Maglev Bearing 17 Indicator 14 Mini Driver 120 Sleeve Bearing 16 IBEST Couplers 65 Kit 81 FieldLogger 5, 8 Matrix 15 Mini Transmitters 114 Illuminated 15 Message 81 Modbus Finger Guards 17 Inclinometer 103, 104 Length Sensor 107 AirGate 5 Flange Indicator 13 Indicator Level DigiGate 40 Float Switch 103 4 to 20 mA 77 Alarm Card 33 Digirail 5 Analog Totaliser 78 Float Switch 102 FieldLogger 5 FM Tuner 21 Line Speed 78 Level Shifter 2 IO Module 7 Foot Switch 14 NPN Pulse 79 Monitor 24 mPCProbe 3 Process 77 Tank/Dam Sensor 102 PWM Speed Controller 55 Frame 17 63 Tachometer 78 Level Gauge Box 104 RTU Card 5 Frame 23 64 Industrial Pushbutton 13 Stepper Controller 57 Lever Microswitch 105 TCP Software 69 Frame 24 64 Infrared Wireless Router 6 Light Frame 34 64 Analog 105 Moisture Meter 118 LED Bulb 126 Jumper Wire 105 Signal Tower 126 Freetronics Temperature Transmitter 6 Motion Controller 90 Warning Light 126 Eleven 25 Thermometer 117 Motor Accessories EtherTen 25 Light Sensor 105 Instrument Amplifier 2 Aluminium Hub 66 KitTen 26 Linear Actuator 63 Bracket 66 LCD and Keypad 28 Internal Jumpers 46 Flexible Couplers 65 POE 26 Linear Position 107 Inverters 89 Line Rotary Encoder 66 Shield 26 Line Speed Indicator 78 IOIO 31 Shaft Coupler 66 FT232RL 26 Spider Couplers 66 LinkSprite 108 FTDI I/O Module 7, 23, 40 Motor Driver LiPoly Charger 88 Breakout 26, 31 ISEE-Modbus TCP 70 Current 52 Cable 27 LJTick-Current Shunt 2 DC 54, 60 Isolated Transmitter 111, 112 Digital 59 Function Generator 114 LJTick-DAC 2 Isolator 19 Feedback 53 PID 54 Current Meter 77 Profibus-Modbus 40 Starter Kit 92 Serial 53 LCD Module 79 Tag 92 Programmable Controllers Servo 55 LED Displays 81 RGB LED 81 Stepper 56 Line Speed Indicator 78 Arduino 24, 26 Unipolar Stepper 57 Load Cell Indicator 75 Breadboard 31 RJ45 4, 12, 13 Development Board 30 VSD 56 Process Indicator 75 RMS Amplifier 125 Motor Power Supply 61 Tachometer 77 Freetronics 25 Temperature Indicator 76 FTDI 26 Robotics & Motor Controllers Motors Totaliser Indicator 78, 79 IO 23 Current Motor Driver 52 AC Servo 65 Parallel Port Card 11, 23 Matix Display 30 Digital Stepping Driver 59 Bipolar Gearbox 64 PID Temperature 37 High Power Driver 54 Patch Leads 12 DC Motor 62 Real Time Clock 31 Servo Controller 55 Shield 27, 28 DC Servo 65 PCB Relays 72 Servo Driver 60 Gearbox 62 Pro Mini 24 Speed Controller 54 Linear 62 PCB Terminals 16 Stepper Controller 57 ProtoShield 27, 28 Motor Accessories 65 PC Relay Controller 23 USB Controller 53 RC Servo 61 Proximity Variable Speed Drive 56 Stepper Motors 63 pH Meter 118 Analog 99 Rotary Encoder 66 Motor Shield 27 Photoelectric 90 Capacitive 96 RPM indicator 78 DC 98 MP3 Trigger 124 Photo-electric switch 106 Inductive 97 RS-232 Converter 17, 18, 19 MPLAB 51 Photo Interrupter 107 PS2 Trackball 15 RS-232 Isolator 19 Multi-Function Timer 42 PICKit 2 52 Pulse Generator 43, 57 RS-422 Converter 18 Multimeter 115 PID Controller 37 Pushbutton RS-485 Card 4 Multiple Relay Cards 72 PIR 105 Concave 14 RS-485 Converter 17 Convex 14 Multiplexer Shield 29 Pixel Board Emergency 13 RT28U 36 MUX 27 Picaxe 23 Flush 13 Programming Cables 52 Indicator 13 RTC 31 myPCProbe 3 PLCs & HMIs Latching 13 RTC86 34 Communication Cables 39 RTD I/O Module 40 N Current Transmitter 94 LCD 41 Q PVC Cable 95 Logic Controller 39 Temp Probe 95 Splat Controller 40 N232/N323 35 Qik Controller 53 Thin Film 96 Touchscreen 38 Wire 96 N320 Indicator 76 Pliers 119 RTU 33 N480 36 Plug-In Relay Cards 73 R Rubber Duck 21 N1020 PID 36 Plug-in Relays 71 N1100HC 37 Plug Packs 86 Radiation Sensor 124 S N1500 Indicator 75 PNLMMi216 41 Raw Water/Sewerage 102 N2000 37 POE 26 Razor IMU 109 SCADA 37 N3000 38 Pololu Driver 54 RC Servo 62 Screwdriver 120 ND556 58 Potentiometer 15 Redundancy Supply 83 Security Network Cable Tester 115 Relay Base 71 Power Keypad Controller 91 Ni-Cr Thermocouple 95 Amplifier 125 Relay Cards PIR 90 Analyser 118 NP-430 100 12.5 kHz 57 RFID 91 Meter 117 DC SSR 73 Siren 92 NTC Probe 35 Power Supplies Infra Red 32 Wired System 90 Wireless Kits 89 Null Modem 12 3 Phase 83 Multiple 72 Adjustable 86 Plug-In 73 Sensors Numeric Keypad 91 Cage Switchmode 83 Telecoms 72 Accelerometer 108 DC-DC Converters 86 UHF 32 Analog Proximity 99 DIN Rail 82, 83 Relay Controller 23, 32 Barometric 101 O High Temp 84 Capacitive Proximity 96 Relays Multiple Rail 85 Touch Keypad 97 Plug Pack 86 Chassis Mount 71 Current 110 Olimex 51 Single Phase 82 DIN Rail Mountable 71 DC Square Proximity 98 UPS Module 83 Opto-Isolator Card 73 OpenLog 10 Dust Cover 94 PR-3850 100 PCB Mount 72 Float Switch 102 Optical Fibre 20 Relay Cards 72 Gyro 110 Pressure Sensors Relay Terminals 70 Hall Effect 99 Opto-Isolator Card 73 Absolute 99 Solid State Relays 72 Inclinometer 103 ORP Meter 118 Barometric 101 SSR Controller 74 Inductive Proximity 97 Digital 101 SSR Heatsink 75 Infrared 105 Oscillator 43 Flush Diaphragm 100 Relays with LED 71 Level 102, 104 Oxygen Meter 117 Gauge 100 Light Sensor 105 Plug In 100 Remote & GSM Controllers Limit 104 Modbus Transducers 101 GSM Controller 33 Loop Powered 94 Relay Controller 31, 32 PhotoElectric 106 P Printer 16 RFID Pressure 100 Printer paper 16 PVC Cable 95 Alarm Kit 91 Remote Sensor 93 Panel Meters & Displays Process Controller 37 Key Fob 91 Replacement Sensor 94 7-Segment 80 Reader 92 RTD Sensor 95 T Staircase Light 42 UV-Solar-Wind 123 Tank/Dam 102 Weekly 42 Tem Humidity 92 TLC-422 Converter 18 Temp Humid Breakout 96 Tachometer 78 V Thermocouple Probe 95 TLC-485 18 Tachometer Multimeter 117 Transducer Display 100 TM-619 42 Serial 30 TagTemp 7 Valve Controller 37 TMP102 96 Servo Motors 65 Tank/Dam 102 VantagePro2 121 Tools Servo Positioner 38 TB-60 Cable 61 Crimpers 120 Vantage Vue 122 Shaft Coupler 66 TB6612FNG 53 Crimping 120 Venus GPS 9 Cutter 119 Telecoms Relay Cards 72 Shaft Pair 66 Hemostats 119 VFD-EL 56 Shields TellyMate 30 Pliers 119 Vibration Meter 118 Screwdrivers 120 CAN Bus 29 Temp Controller 34, 35, 36, 38 Side Cutters 119 ViewPID 70 Cellular 29 Tempgun 117 Tweezers 119 Ethernet 28 VPack3.3V Charger 89 Kit 27 Totaliser 78 Temp Probe 3, 95 VSD 56 MP3 29 Touchscreen 38 Mutiplexer 29 Temp & Process Controllers Vue Console 122 Terminal 29 PID Controller 36 Trackballer 15 USB 28 Process Controller 37 Transformer 111 ShiftBrite 15 Temp Controller 34, 35 W Trip Alarm Unit 38 TRexX 53 Signal Conditioners Terminal Blocks Trip Alarm 38 Converters 111, 114 Accessories 45 W5100 chip 26 Isolators 113 Trip Alarm Unit 38 Cable Entry 46 Warning Light 126 Signal Tower 126 Internal Jumpers 46 Tweezers 119 SpringCage 45 Water Quality Meter 118 Site-Log Loggers 9 Twist Release E-stop 13 Terminal Labels 47 Weather Envoy 122 SiteView Software 9 Universal 43 TxIsoRail 112 Terminal Labels 47 WeatherLinkIP 122 SKJ Terminals 43 TxRail 112 Weather Stations Slimline Switchmode 83 Terminals Breakout Boards 4 Anemometer 123 Small Thermostat 34 DIN Rail 16 U Console 121 SMC Power Supply 61 PCB 16 Envoy 122 Gateway 123 Terminal Shield 29 Software U3-LV 1 UV-Solar-Wind Module 123 ModbusView 69 Test Equipment VantagePro2 Kits 121 U6-Pro Data 1 VantagePro2 Plus Kits 121 SiteView 9 4 to 20 mA Calibrator 116 Vantage Vue 122 SuperView 69 Analysis 117, 118, 119 UC-232A 17 WeatherLink 121 ViewPID 70 Calibrator 116 UE9-Pro 1 Wireless Stations 122 Soil Moisture 124 Clamp Meter 115 Datalogger 115 UH284 11 Webserver 7 Solenoid 31 Digital Tachometer 116 uLog 10 Weekly Timer 42 SPDT Relays 72 EMF 119 Environment Meter 118 UM12 21 Wet/Dry-Probe 94 Spirit Levels 104 Function Generator 115 UM96 21 Wire Antenna 22 Splat Controller 40 Infrared Thermometer 117 Leak Detector 119 UniDirectional 55 Wireless Split Core Transformer 111 Moisture Meter 118 AirGate 5 Universal Hub 66 SpringCage Terminal 46 Multimeter 114, 115 Alarm Kit 89 ORP Meter 118 Universal Stepper 64 Bluetooth 21 SSR Relays 73 pH Meter 118 Relay Card 32 Power Analyser 118 Uno R3 24 Stackable Header 30 RTU 33 Power Meter 117 Uno SMD 24 Transceiver 21 Stepper Motors Pure Water Meter 118 UHF 21 AC Servo Motor 65 RHT 117 UPS Power Supply 83 XBee 22 Salt Water Meter 118 Bipolar Gearbox 64 USB ZigBee 6 Bipolar Stepper Motor 63 Sound Level Meter 119 Card Reader 11 Wireless Repeater 122 DC Servo Motor 65 Tachometer 116 Converters 18 Power Supply 61 Temperature 117 Thermocouple 117 Data Acquisition 1 Stereo Amplifier 125 USB Multimeter 115 Extension Lead 12 X STK500 51 Vibration Meter 118 Hub 11 Interface Board 4 Thermal Printer 16 Strobe Siren 90 JTAG 52 XBee Thermocouple 95 Leads 12 Sunix 11, 12 Breakout Board 22 Multimeter 115 Thermostat 34 Explorer Board 22 SuperView 69 myPCLab 4 Shield 27 Threaded Shaft 63 Power Supply 86 Surge Protector 20 Programmer 51 Tilt Switch 104 RFID Reader 92 Surge Terminals 44 Z Timers Sensor Probes 3 Switch Serial 17 7 Digit 42 Foot 14 Site Server 9 Cyclic 42, 43 ZIF 51 NO/NC Contact 13 USB to RS-232 17 Kit 43 USB To TTL Serial 18 Zigbee Wireless 6 Multi-Function 42 Programmable 42 USB Hub 11