DOCSLIB.ORG

Mepco Schlenk Engineering College, Sivakasi

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mepco Schlenk Engineering College, Sivakasi MEPCO SCHLENK ENGINEERING COLLEGE, SIVAKASI (AUTONOMOUS) AFFILIATED TO ANNA UNIVERSITY, CHENNAI 600 025 REGULATIONS: MEPCO - R2015 (FULL TIME) (CHOICE BASED CREDIT SYSTEM) B. E. ELECTRICAL AND ELECTRONICS ENGINEERING Department Vision Department Mission To Render Services to Meet the Growing To Provide the Students a Rigorous Learning Experience in Global Challenges of Engineering Understanding Industries Basics of Electrical & Electronics Engineering Built on the by Educating Students to become Foundation of Science, Mathematics, Computing, and Exemplary Technology by Emphasizing Professional Electrical and Electronics Active Learning with Strongly Supported Laboratory Engineers of High Ethics Component and Prepare them for Professional Careers UG Programme Educational Objectives (PEOs) I. Preparation: To prepare students to excel in Industry or in Postgraduate Programmes by Educating Students along with High moral values and Knowledge. II. Core Competence: To provide students with the fundamentals of Engineering Sciences with more emphasis in Electrical and Electronics Engineering by way of analyzing and exploiting engineering challenges in disparate systems during their professional career. III. Breadth: To train students with good scientific and engineering breadth so as to comprehend, analyze, design, and create novel products and solutions for the real life problems. IV. Professionalism: To inculcate professional and ethical attitude, effective communication skills, teamwork skills, multidisciplinary approach, entrepreneurial thinking and an ability to relate engineering issues to broader social context in students. V. Learning environment: To provide students with an academic environment aware of excellence, leadership, written ethical codes and guidelines, and the self motivated life-long learning needed for a successful professional career. UG Programme Outcomes (POs) 1. Graduates will demonstrate knowledge of mathematics, science, engineering fundamentals and an engineering specialization to the conceptualization of engineering models. 2. Graduates will exhibit an ability to identify, formulate, research literature and solve engineering problems. 3. Graduate will reveal an ability to design electrical and electronic circuits and conduct experiments with electrical systems, analyze and interpret data. 4. Graduate will demonstrate an ability to visualize and work on laboratory and multidisciplinary tasks. 5. Graduate will demonstrate skills to use modern engineering tools, software and equipment to analyze problems. 6. Graduate will exhibit knowledge of professional and ethical responsibilities. 7. Graduate will be able to communicate effectively in both verbal and written form. 8. Graduate will show the understanding of impact of engineering solutions on the society and also will be aware of contemporary issues. 9. Graduate will develop confidence for self education and ability for life-long learning. 10. Graduates can participate and succeed in competitive examinations. CURRICULUM (I to VIII SEMESTER) SEMESTER – I (Common to all UG Programmes) SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15HS101 Technical English – I 3 0 2 4 2. 15BS101 Mathematics – I 3 2 0 4 3. 15BS102 Engineering Physics 3 0 0 3 4. 15BS103 Engineering Chemistry 3 0 0 3 1 5. 15GE101 Computer Programming 3 0 0 3 6. 15GE102 Engineering Graphics 2 0 4 4 PRACTICAL 7. 15BS151 Physics and Chemistry Laboratory 0 0 4 2 8. 15GE151 Computer Programming Laboratory 0 0 4 2 9. 15GE152 Engineering Practices Laboratory 0 0 4 2 TOTAL 17 2 18 27 SEMESTER II – Electrical and Electronics Engineering SL. COURSE CODE COURSE TITLE L T P C NO. THEORY 1. 15HS201 Technical English – II* 3 0 0 3 2. 15BS201 Mathematics – II* 3 2 0 4 3. 15BS202 Environmental Science and Disaster Management* 3 0 0 3 4. 15BS204 Materials Science 3 0 0 3 (Common to EEE / ECE / CSE / IT) 5. 15GE203 Basic Civil and Mechanical Engineering 3 0 0 3 (Common to EEE / ECE) 6. 15EE201 Electric Circuit Theory 3 2 0 4 PRACTICAL 7. 15BS251 Applied Physics and Environmental Chemistry Laboratory 0 0 4 2 (Common to EEE / ECE / CSE / Mech / IT / Bio-Tech) 8. 15EE251 Electrical Circuits Laboratory 0 0 4 2 TOTAL 18 4 8 24 * Common to all UG Programmes SEMESTER – III SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15MA302 Mathematics III - Transforms and Probability Distributions 3 2 0 4 2. 15EE301 Measurement and Instrumentation System 3 0 0 3 3. 15EE302 Electronic Devices and Circuits 3 0 0 3 4. 15EE303 Electric and Magnetic Fields 3 2 0 4 5. 15EE304 Network Analysis and Synthesis 3 2 0 4 6. 15EE305 Electrical Power Generation and Utilization 3 0 0 3 PRACTICAL 7. 15EE351 Measurements and Instrumentation Laboratory 0 0 4 2 8. 15EE352 Electronic Devices and Circuits laboratory 0 0 4 2 9. 15HS351 Presentation Skills Laboratory 0 0 2 1 (Common to CIVIL / EEE / CSE) TOTAL 18 6 10 26 SEMESTER – IV SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15MA402 Mathematics IV - Numerical and Statistical Techniques 3 2 0 4 (Common to EEE / Mechanical) 2. 15EE401 DC Machines and Transformers 3 2 0 4 3. 15EE402 Control Systems Engineering 3 2 0 4 4. 15EE403 Transmission and Distribution 3 2 0 4 5. 15EC405 Linear integrated Circuits and Applications 3 0 0 3 6. 15EC406 Digital Logic Circuits 3 0 0 3 PRACTICAL 7. 15EE451 DC Machines and Transformers Laboratory 0 0 4 2 8. 15EE452 Control Systems laboratory 0 0 4 2 9. 15EC453 Linear and Digital Integrated Circuits Laboratory 0 0 4 2 TOTAL 18 8 12 28 2 SEMESTER – V SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15EE501 Induction and Synchronous Machines 3 2 0 4 2. 15EE502 Power Electronics 3 0 0 3 3. 15EE503 Microprocessors and Microcontrollers 3 0 0 3 4. Core Elective –I 3 0 0 3 5. Allied Elective –I 3 0 0 3 6. Open Elective –I 3 0 0 3 PRACTICAL 7. 15EE551 Induction and Synchronous Machines Laboratory 0 0 4 2 8. 15EE552 OOPS Laboratory for Electrical Engineers 0 2 4 3 9. 15HS551 Professional Communication Skills Laboratory 0 0 4 2 (Common to CIVIL / EEE / CSE) TOTAL 18 4 12 26 SEMESTER – VI SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15EE601 Electrical Drives 3 0 0 3 2. 15EE602 Power System Analysis 3 2 0 4 3. 15EE603 Design of Electrical Machines 3 2 0 4 4. Core Elective-II 3 0 0 3 5. Allied Elective-II 3 0 0 3 6. Open Elective-II 3 0 0 3 PRACTICAL 7. 15EE651 Microprocessors and Microcontrollers Laboratory 0 0 4 2 8. 15EE652 Power Electronics and Drives Laboratory 0 0 4 2 9. 15EE653 Technical Seminar** 0 0 2 1 TOTAL 18 4 10 25 ** Internal Assessment only SEMESTER – VII SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. 15EE701 Power System Operation and Control 3 0 0 3 2. 15EE702 Protection and Switchgear 3 0 0 3 3. Core Elective-III 3 0 0 3 4. Core Elective-IV 3 0 0 3 5. Core Elective-V 3 0 0 3 6. Open Elective-III 3 0 0 3 PRACTICAL 7. 15EE751 Power System Simulation Laboratory 0 0 4 2 8. 15EE752 Mini Project** 0 0 2 1 9. 15EE753 Comprehensive Skill Development ** 0 0 2 1 TOTAL 18 0 8 22 ** Internal Assessment only SEMESTER – VIII SL. NO. COURSE CODE COURSE TITLE L T P C THEORY 1. Core Elective-VI 3 0 0 3 2. Open Elective-IV 3 0 0 3 PRACTICAL 3. 15EE851 Project work 0 0 12 6 TOTAL 6 0 12 12 Total Credits: 190 (Regular) Total Credits: 139 (LES) 3 CORE ELECTIVE – I (V Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC01 Processing of Digital Signals 3 0 0 3 2. 15EEC02 Field Computation 3 0 0 3 3. 15EEC03 Digital Control System 3 0 0 3 CORE ELECTIVE – II (VI Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC04 Advanced Control System 3 0 0 3 2. 15EEC05 Renewable Energy Sources 3 0 0 3 3. 15EEC06 High Voltage Engineering 3 0 0 3 4. 15EEC07 Illumination, Wiring and Estimation 3 0 0 3 CORE ELECTIVE – III (VII Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC08 Special Electrical Machines 3 0 0 3 2. 15EEC09 Power System Transients 3 0 0 3 3. 15EEC10 Power System Stability 3 0 0 3 4. 15EEC11 SCADA and DCS 3 0 0 3 CORE ELECTIVE – IV (VII Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC12 Computer Networks 3 0 0 3 2. 15EEC13 Advanced Power Electronics 3 0 0 3 3. 15EEC14 Power Quality 3 0 0 3 4. 15EEC15 Advanced Instrumentation 3 0 0 3 CORE ELECTIVE – V (VII Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC16 Smart Grid 3 0 0 3 2. 15EEC17 Soft Computing Techniques 3 0 0 3 3. 15EEC18 Robotics 3 0 0 3 4. 15EEC19 Numerical Protection 3 0 0 3 5. 15EEC20 High Voltage Direct Current Transmission 3 0 0 3 CORE ELECTIVE – VI (VIII Semester) SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15EEC21 Flexible AC Transmission Systems 3 0 0 3 2. 15EEC22 Restructured Power System 3 0 0 3 3. 15EEC23 Power System Dynamics 3 0 0 3 4. 15EEC24 Bio Medical Instrumentation 3 0 0 3 ALLIED ELECTIVES - CURRICULUM Offered by Civil Department V Semester SL. COURSE COURSE TITLE L T P C NO. CODE 1. 15CEA01 Industrial Pollution Prevention and Control 3 0 0 3 2. 15CEA02 Introduction to Engineering Seismology 3 0 0 3 3. 15CEA03 Solar Energy Utilization 3 0 0 3 4. 15CEA04 Environmental Geotechnology 3 0 0 3 5. 15CEA05 Principles of Global Positioning System 3 0 0 3 4 VI Semester SL.
Load more

Recommended publications
  • A History of Impedance Measurements
    A History of Impedance Measurements by Henry P. Hall Preface 2 Scope 2 Acknowledgements 2 Part I. The Early Experimenters 1775-1915 3 1.1 Earliest Measurements, Dc Resistance 3 1.2 Dc to Ac, Capacitance and Inductance Measurements 6 1.3 An Abundance of Bridges 10 References, Part I 14 Part II. The First Commercial Instruments 1900-1945 16 2.1 Comment: Putting it All Together 16 2.2 Early Dc Bridges 16 2.3 Other Early Dc Instruments 20 2.4 Early Ac Bridges 21 2.5 Other Early Ac Instruments 25 References Part II 26 Part III. Electronics Comes of Age 1946-1965 28 3.1 Comment: The Post-War Boom 28 3.2 General Purpose, “RLC” or “Universal” Bridges 28 3.3 Dc Bridges 30 3.4 Precision Ac Bridges: The Transformer Ratio-Arm Bridge 32 3.5 RF Bridges 37 3.6 Special Purpose Bridges 38 3,7 Impedance Meters 39 3.8 Impedance Comparators 40 3.9 Electronics in Instruments 42 References Part III 44 Part IV. The Digital Era 1966-Present 47 4.1 Comment: Measurements in the Digital Age 47 4.2 Digital Dc Meters 47 4.3 Ac Digital Meters 48 4.4 Automatic Ac Bridges 50 4.5 Computer-Bridge Systems 52 4.6 Computers in Meters and Bridges 52 4.7 Computing Impedance Meters 53 4.8 Instruments in Use Today 55 4.9 A Long Way from Ohm 57 References Part IV 59 Appendices: A. A Transformer Equivalent Circuit 60 B. LRC or Universal Bridges 61 C. Microprocessor-Base Impedance Meters 62 A HISTORY OF IMPEDANCE MEASUREMENTS PART I.
    [Show full text]
  • Electrical Measurements
    ELECTRICAL MEASUREMENTS GEETHANJALI COLLEGE OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF EEE Name of the Subject : Electrical Measurements JNTU CODE : 56009 Programme : UG / PG Branch: Electrical & Electronics Engineering Version No : Year: III Updated on :27/12/2014 Semester: II No. of pages : Classification status (Unrestricted / Restricted ) Distribution List : Prepared by : 1) Name : K.Mahender 1) Name : 2) Sign : 2) Sign : 3) Design : Associate Professor 3) Design : 4) Date : 27/12/2014 4) Date : Verified by : 1) Name : * For Q.C Only. 2) Sign : 1) Name : 3) Design : 2) Sign : 4) Date : 3) Design : 4) Date : Approved by : (HOD ) 1) Name : Dr. S.Radhika 2) Sign : 3) Date : SYLLABUS JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD III Year B.Tech EEE II-Semester T P C 4+1 *0 4 Unit -I Classification of measuring instruments-deflecting, controlling and damping systems, ammeters and voltmeters, PMMC,MI and MC instruments, Expression for the deflecting torque and control torque. Expression for the deflecting torque and control torque, Errors and compensation and extension of range using shunts and series resistance, Electrostatic voltmeters-electrometer type and attracted disc type. Extension of range of electrostatic voltmeters Unit-II Introduction to CT & PT- Design considerations, Ratio and phase angle errors, Types of P.F meters-dynamometer and moving iron type, I ph and 3 ph meters, Frequency meters- resonance type and Weston type, Synchroscopes Unit-III Single phase dynamometer wattmeter-LPF & UPF, Double element and three element dynamometer wattmeter, Expression for deflecting and controlling torques and extension of range of wattmeter using instrument transformers, Measurement of active in balanced systems, Measurement of reactive powers in unbalanced systems.
    [Show full text]
  • Bridge Circuits for the Measurement
    Malaya Journal of Matematik, Vol.S, No.2, 3089-3093, 2020 https://doi.org/10.26637/MJM0S20/0792 Bridge circuits for the measurement C. Mani,1 S. Ravi,2 V. Sathya Narayanan 3 and S. Aarthi Suriya 4 Abstract In this projects, a bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are ”bridged” by a third branch connected between the first two branches at some intermediate point along them. Bridge circuits now find many applications, both linear and non-linear, including in instrumentation, filtering and power conversion. As we saw with DC measurement circuits, the circuit configuration known as a bridge can be a very useful way to measure unknown values of resistance. Keywords Bridge circuit. 1,2,3,4Department of Electrical and Electronics Engineering, Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu, India. Article History: Received 01 October 2020; Accepted 10 December 2020 c 2020 MJM. Contents the unknown resistor and its neighbor R3, which enables the value of the unknown resistor to be calculated. The Wheat- 1 Introduction......................................3089 stone bridge has also been generalized to measure impedance 2 Types of Maxwell’s Bridge . 3089 in AC circuits, and to measure resistance, inductance, capaci- tance,and dissipation factor separately. 2.1 Maxwell’s Inductance Bridge............ 3090 2.2 Maxwell’s Inductance Capacitance Bridge.. 3090 3 Anderson Bridge.................................3090 3.1 Constructions of Anderson’s Bridge...... 3090 3.2 Phasor Diagram of Anderson’s Bridge..... 3091 4 Schering Bridge..................................3091 5 Wheatstone bridge...............................3092 5.1 Construction of Wheatstone bridge......
    [Show full text]
  • Electrical Measurements Unit-I Measurement of Voltage and Current 1
    ELECTRICAL MEASUREMENTS UNIT-I MEASUREMENT OF VOLTAGE AND CURRENT 1. What is meant by galvanometer? An instrument for detecting and measuring small electric current it is also called as galvanometer. 2. What is the Use of galvanometer in measurement system? Galvanometer is used as null detector (or) zero-current detector in bridge circuit and potentiometer measurement. 3. What are the different types of galvanometer? D’Arsonval galvanometer Vibration galvanometer Ballistic galvanometer Flux meter 4. What are the following methods are adopted calibrating the galvanometer? Use of charged capacitor Use of a standard solenoid Use of a mutual inductor 5. What is meant by vibration galvanometer? Vibration galvanometer is a tuned detector and as such, it is very sensitive to Changes of frequency. 6. Differentiate between ammeter and voltmeter. S. No Ammeter Voltmeter 1 It is a current measuring device It is a Voltage measuring device which which measures current through measures potential difference between the circuit. two points of a circuit. 2 Always connected in series with Always connected in Parallel with the circuit. circuit. 3 The resistance is very very The resistance is very very high small 4 Deflecting torque is produced by Deflecting torque is produced by current current to be measured directly which is proportional to the voltage to be measured 7. What is meant by measurement? Measurement is an act or the result of comparison between the quantity and a predefined standard. 8. Mention the basic requirements of measurement. The standard used for comparison purpose must be accurately defined and should be commonly accepted.The apparatus used and the method adopted must be provable.
    [Show full text]
  • Sem 6 Prac Viva Book
    V.P. & R.P.T.P.SCIENCE COLLEGE PHYSICS DEPARTMENT VALLABH VIDYANAGR 6TH SEMESTER B.Sc. PHYSICS US06CPHY07/08/09 PRACTICAL VIVA VOCE BOOK DECEMBER 2017 PREPARED BY Dr. T.H.PATEL PHYSICS DEPT VP & RPTP SCIENCE COLLGE V.VIDYANAGAR Page 1 V.P. & R.P.T.P. SCIENCE COLLEGE VALLABH VIDYANAGAR B. Sc. Semester-6 Physics Practical -VIVA-VOCE No. Experiment Course Page No. 1 Searl s Goniometer (variable distance) PHY09 3 2 Power Amplifier PHY08 3 3 Determination of Planck Constant. PHY09 5 4 L - by Owen s Bridge PHY07 11 5 Light Dependent Resistor (LDR) PHY09 12 6 Wein Bridge Oscillator PHY08 14 7 Bistable Multivibrator PHY08 16 8 Hall effect Measurements (Const. Probe Current) PHY07 18 9 e/m of an Electron by Magnetron Method PHY07 19 10 Square Well Potential PHY09 20 11 Fabri-Parot Etalon PHY09 21 12 LVDT Characteristics PHY07 23 13 Characteristics of UJT PHY08 25 14 Op-Amp Applications PHY08 26 15 Op-Amp Parameters PHY08 26 16 High Resistance by Leakage PHY07 28 17 Binary Counters (4 bit) PHY08 29 18 Babinet Compensator PHY09 34 19 Carey- PHY07 36 20 e by Millikan s Oil Drop Method PHY09 38 21 MichelsonFoster Interferometer- Method ρ II PHY09 40 Determination of Lattice Parameters PHY09 22 40 (electron diffraction ring pattern) 22 GENERAL QUESTION PHY09 41 PREPARED BY Dr. T.H.PATEL PHYSICS DEPT VP & RPTP SCIENCE COLLGE V.VIDYANAGAR Page 2 1 Searl’s Goniometer PHY09 What do you mean by a coaxial system of lenses? When a number of lenses having a common principal axis are used, then this combination is called a coaxial system of lenses.
    [Show full text]
  • 2102311 Electrical Measurement and Instruments (Part II)
    2102311 Electrical Measurement and Instruments (Part II) ¾ Bridge Circuits (DC and AC) ¾ Electronic Instruments (Analog & Digital) ¾ Signal Generators ¾ Frequency and Time Interval Measurements ¾ Introduction to Transducers อาภรณ ธีรมงคลรศมั ี ตึกไฟฟา 6 ชนั้ หอง 306 Textbook: -A.D. Helfrick, and W.D. Cooper, “Modern Electronic Instrumentation and Measurement Techniques” Prentice Hall, 1994. - D.A. Bell, “Electronic Instrumentation and Measurements”, 2nd ed., Prentice Hell, 1994. ResistorResistor TypesTypes Importance parameters Value Tolerance Power rating Temperature coefficient Type Values (Ω) Power rating Tolerance (%) Temperature picture (W) coefficient (ppm/°C) Wire wound 10m~3k (power) 3~1k ±1~±10 ±30~±300 Wire wound (precision) 10m~1M 0.1~1 ±0.005~±1 ±3~±30 Carbon film 1~1M 0.1~3 ±2~±10 ±100~±200 Metal film 100m~1M 0.1~3 ±0.5~±5 ±10~±200 Metal film (precision) 10m~100k 0.1~1 ±0.05~±5 ±0.4~±10 Metal oxide film 100m~100k 1~10 ±2~±10 ±200~±500 Data: Transistor technology (10/2000) Resistor Values Color codes Resistor Values Alphanumeric 4 band color codes Color Digit Multiplier Tolerance Temperature (%) coefficient (ppm/°C) Most sig. fig. of value Silver 10-2 ±10 K Tolerance - - - Least sig. fig. Multiplier Gold 10-1 J of value ±5 Ex. Black 0 100 - - ±250 K Brown 1 101 ±1 F ±100 H Red 2 102 ±2 G ±50 G Green 3 Red Orange 3 10 - ±15 D Blue Brown - Yellow 4 104 - ±25 F R = 560 Ω ±2% Green 5 5 D E 10 ±0.5 ±20 Alphanumeric Blue 6 106 ±0.25 C ±10 C Violet 7 107 ±0.1 B ±5 B R, K, M, G, and T = 0 3 6 9 12 Gray 8 108 - ±1 A x10 , x10 , x10 , x10 , and x10 - White 9 109 - Ex.
    [Show full text]
  • JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD (Established by State Act No
    JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD (Established by State Act No. 30 of 2008) Kukatpally, Hyderabad, Telangana (India). ACADEMIC REGULATIONS FOR B.TECH. REGULAR STUDENTS WITH EFFECT FROM ACADEMIC YEAR 2016-17 (R-16) 1.0 Under-Graduate Degree Programme in Engineering & Technology (UGP in E&T) 1.1 JNTUH offers a 4-year (8 semesters) Bachelor of Technology (B.Tech.) degree programme, under Choice Based Credit System (CBCS) at its non-autonomous constituent and affiliated colleges with effect from the academic year 2016-17 in the following branches of Engineering: Branch Civil Engineering Electrical and Electronics Engineering Mechanical Engineering Electronics and Communication Engineering Computer Science and Engineering Chemical Engineering Electronics and Instrumentation Engineering Bio-Medical Engineering Information Technology Mechanical Engineering (Mechatronics) Electronics and Telematics Engineering Metallurgy and Material Technology Electronics and Computer Engineering Mechanical Engineering (Production) Aeronautical Engineering Instrumentation and Control Engineering Biotechnology Automobile Engineering Mining Engineering Petroleum Engineering Civil and Environmental Engineering Mechanical Engineering (Nano Technology) Computer Science & Technology Pharmaceutical Engineering 1 2.0 Eligibility for admission 2.1 Admission to the under graduate programme shall be made either on the basis of the merit rank obtained by the qualified student in entrance test conducted by the Telangana State Government (EAMCET) or the University or on the basis of any other order of merit approved by the University, subject to reservations as prescribed by the government from time to time. 2.2 The medium of instructions for the entire under graduate programme in E&T will be English only. 3.0 B.Tech. Programme structure 3.1 A student after securing admission shall pursue the under graduate programme in B.Tech.
    [Show full text]
  • Bridge Measurement
    2 Bridge Measurement 2.1 INTRODUCTION Bridges are often used for the precision measurement of component values, like resistance, inductance, capacitance, etc. The simplest form of a bridge circuit consists of a network of four resistance arms forming a closed circuit as shown in Fig. 2.1. A source of current is applied to two opposite junctions and a current detector is connected to other two junctions. The bridge circuit operates on null detection principle and uses the principle of comparison measurement methods. It compares the value of an unknown component with that of an accurately known standard component. Thus, the accuracy of measurement depends on the bridge and not on the null detector. When no current flows through the null detector, the bridge is said to be balanced. The relationship between the component values of the four arms of the bridge at the balancing is called balancing condition or balancing equation. Balancing equation gives up the value of the unknown component. Fig. 2.1 General form of a bridge circuit 2.1.1 Advantages of Bridge Circuit The various advantages of a bridge circuit are: 1. The balance equation is independent of the source voltage magnitude and its impedance. Bridge Measurement 53 Wheatstone Bridge under Small Unbalance As discussed in previous section different galvanometers have different current/voltage sensitivities. Hence, in order to determine whether the galvanometer has the required sensitivity to detect an unbalance condition the bridge circuit can be solved for a small unbalance by converting the Wheatstone bridge into its equivalent Thevenin’s circuit. Let us consider the bridge is balanced, when the branch resistances are R1, R2, R3 and RX, so that at balance R R _____1 3 RX = R2 1 Let the resistance RX be changed to DRX creating an unbalance.
    [Show full text]
  • EE 33-Measurements and Instrumentation
    www.vidyarthiplus.com EE 33-Measurements and Instrumentation UNIT-I-INTRODUCTION CONTENTS Measurement Basic requirements Significance of measurement Methods of measurement Instrument and measurement systems Evolution of instruments Classification of Instruments Types of Instrumentation system Elements of generalized measurement system Functional elements of an instrument Static and dynamic characteristics Errors in measurement Statistical evaluation of measurement data Standards Calibration 1. Measurement: Measurement of a given quantity is essentially an act or result of comparison between the quantity (whose magnitude is unknown) and predetermined or predefined standards. Two quantities are compared the result is expressed in numerical values. www.vidyarthiplus.com www.vidyarthiplus.com EE 33-Measurements and Instrumentation 2. Basic requirements for a meaningful measurement: The standard used for comparison purposes must be accurately defined and should be commonly accepted. The apparatus used and the method adopted must be provable (verifiable). 3. Significance of Measurement Importance of Measurement is simply and eloquently expressed in the following statement of famous physicist Lord Kelvin: ”I often say that when you can measure what you are speaking about and can express it in numbers, you know something about it; when you cannot express in it numbers your knowledge is of meager and unsatisfactory kind” 4. Methods of Measurement Direct Methods Indirect Methods DIRECT METHODS: In these methods, the unknown quantity (called the measurand ) is directly compared against a standard. INDIRECT METHOD: Measurements by direct methods are not always possible, feasible and practicable. In engineering applications measurement systems are used which require need of indirect method for measurement purposes. www.vidyarthiplus.com www.vidyarthiplus.com EE 33-Measurements and Instrumentation 5.
    [Show full text]
  • A History of Impedance Measurements
    A HISTORY OF IMPEDANCE MEASUREMENTS PART I. THE EARLY EXPERIMENTERS 1775-1915 1.1 Earliest Measurements, DC Resistance It would seem appropriate to credit the first impedance measurements to Georg Simon Ohm (1788-1854) even though others may have some claim. These were dc resistance measurements, not complex impedance, and of necessity they were relative measurements because then there was no unit of resistance or impedance, no Ohm. For his initial measurements he used a voltaic cell, probably having copper and zinc plates, whose voltage varied badly under load. As a result he arrived at an erroneous logarithmic relationship between the current measured and the length of wire, which he published in 18251. After reading this paper, his editor, Poggendorff, suggested that Ohm use the recently discovered Seebeck (thermoelectric) effect to get a more constant voltage. Ohm repeated his measurements using a copper-bismuth thermocouple for a source2. His detector was a torsion galvanometer (invented by Coulomb), a galvanometer whose deflection was offset by the torque of thin wire whose rotation was calibrated (see figure 1-1). He determined "that the force of the current is as the sum of all the tensions, and inversely as the entire length of the current". Using modern notation this becomes I = E/R or E =I*R. This is now known as Ohm's Law. He published this result in 1826 and a book, "The Galvanic Circuit Mathematically Worked Out" in 1827. For over ten years Ohm's work received little attention and, what there was, was unfavorable. Finally it was made popular by Henry in America, Lenz in Russia and Wheatstone in England3.
    [Show full text]
  • Kelvin's Double Bridge - Medium Resistance: Voltmeter Ammeter Method – Substitution Method - Wheatstone Bridge Method
    SIC1203 MEASUREMENTS & INSTRUMENTATION UNIT - III ELECTRONIC MEASUREMENTS PREPARED BY : Dr. G.D.Anbarasi Jebaselvi, Dr. S.Poornapushpakala UNIT 3 MEASUREMENT OF RESISTANCE, INDUCTANCE AND CAPACITANCE Low Resistance: Kelvin's double bridge - Medium Resistance: Voltmeter Ammeter method – Substitution method - Wheatstone bridge method. High Resistance: Megger - Direct deflection method - Megohm bridge method, Loss of Charge method - Earth resistance measurement. Introduction to A.C bridges Sources and Detectors in A.C. bridges. Measurement of Self Inductance: Maxwell's bridge - Hay's bridge, and Anderson's bridge. Measurement of Mutual Inductance: Heaviside M.I bridge - Measurement of Capacitance: Schering's bridge – De Sauty's bridge, Measurement of frequency using Wien's bridge. CLASSIFICATION OF RESISTANCES For the purposes of measurements, the resistances are classified into three major groups based on their numerical range of values as under: • Low resistance (0 to 1 ohm) • Medium resistance (1 to 100 kilo-ohm) and • High resistance (>100 kilo-ohm) Accordingly, the resistances can be measured by various ways, depending on their range of values, as under: 1. Low resistance (0 to 1 ohm): AV Method, Kelvin Double Bridge, potentiometer, doctor ohmmeter, etc. 2. Medium resistance (1 to 100 kilo-ohm): AV method, wheat stone’s bridge, substitution method, etc. 3. High resistance (>100 kilo-ohm): AV method, Fall of potential method, Megger, loss of charge method, substitution method, bridge method, etc. SIC1203 MEASUREMENTS & INSTRUMENTATION UNIT - III ELECTRONIC MEASUREMENTS PREPARED BY : Dr. G.D.Anbarasi Jebaselvi, Dr. S.Poornapushpakala LOW RESISTANCE KELVIN DOUBLE BRIDGE The Kelvin double bridge is one of the best devices available for the precise measurement of low resistances.
    [Show full text]