AUCTION 6 HOUSTON AREA LOCATIONS TO BE SOLD IN ONE DAY Featuring: Large Quantity CNC & Manual Machine & Fabricating Equip., Saws, Grinders, Presses, Q.C. Equip., Huge Quantity of Plant Support Equip., Material Handling Equip., Forklifts Up to 36,000 Lb. Cap., Much More

1997 2001

CNC CNC CNC MAZAK MDL. MULTIPLEX 630 ACCURPRESS 400 T. X 20' CNC HYDRAULIC MAZAK QUICKTURN MDL. QT-300 CNC TWIN SPINDLE CNC CENTER PRESSBRAKE TURNING CENTER 2006 Surplus to the Ongoing Operations of FABCOR, INC., THE HAMMONDS COMPANIES, INC., HIPPO HOPPER DIV. OF FABCOR, & OTHERS Theater-Style Digital Color Slide Auction to Be Conducted at the GUESTHOUSE INTERNATIONAL/ A.K.A. HOLIDAY INN & SUITES 125 AIRTEX DRIVE, HOUSTON, TEXAS 77090 (See Directions on Back Page)

CNC AUCTION: THURS., SEPT. 22 • 10:00 A.M. SODICK MDL. AQ55L 4-AXIS CNC RAM INSPECTION: Tues. & Wed., Sept. 20 & 21 From 9:00 A.M. BULLARD CUTMASTER 54" HIGH TYPE EDM MACHINE to 4:00 P.M. & Morning of Sale. Other Times by Appt. Only. COLUMN VERTICAL TURRET

1981

12-1/2" CNC HOLE 1995 PEDDINGHAUS MDL. BPL-1000/5 CNC WARNER & SWASEY MDL. 5A-M3600 LARGE TAYLOR 36,000 LB. CAP. BEAM PUNCH LINE CAPACITY SADDLE TYPE TURRET LATHE MDL. TE360L FORKLIFT

BUYER’S PREMIUM: 12% ONSITE On-Site Bidding in Houston, TX or Bid Via Webcast at 15% VIA WEBCAST

Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 Bob Braman TX Lic. #6362 • Ron Moore TX Lic. #7314 E-MAIL: [email protected] HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com 1997 CNC TWIN SPINDLE TURNING CENTER MAZAK MDL. MULTIPLEX 630, new 1997, Mazatrol T Plus CNC control with 12" CRT col- or display, travels: 22-1/2" X-axis, 11" Z-axis, (2) 10" dia. 3-jaw Kitagawa chucks – each with presetter, 2" thru hole, (2) 12-position tur- rets, 30 HP dual spindles, operator’s control pendant, Mazak Flex-GL400N robotic parts loader/unloader, Royal filter mist collector, chip conveyor, S/N 130826. (Location F) CNC TURNING CENTERS MAZAK QUICKTURN MDL. QT-300, new 2001, Mazatrol 640 PC-FUSION CNC control with 10" color LCD display, 14" swing, 19" Z-axis travel, 12" dia. 3-jaw Kitagawa , 2-3/4" thru hole, 12-position turret, tailstock, tool presetter, 35 HP, Royal filter mist collector, Jorgensen chip conveyor, S/N 193692. (Location F) CNC MONARCH ULTRA-CENTER MDL. 370 X MAZAK MDL. MULTIPLEX 630 CNC TWIN SPINDLE TURNING CENTER 1830, Fanuc 15TT CNC controls, sw/o/bed – 26.3"; Z1-axis 14.6"; max. work dia. w/stan- dard OD tool, Z2-axis 12.6"; 72" centers, left See Page 15 TWIN PALLET CNC HORIZONTAL and right headstocks: 15" chuck; max. hole in MACHINING CENTER draw tube–3.4"; spds.: 63–2,300 RPM; x1 and for BRIDGEPORT MDL. BPC320H, Fanuc OM CNC control, 11.8" x 11.8" pallet, x2 axes (turret slides), (12) live tool positions; Equipment (2) pallets, travels: 13.7" X-axis, 9.8" Y-axis, 11.8" Z-axis, 2.55" spndl. dia., powered rotary tool spd. range 0–4,000 RPM, ISO40 spndl. taper, spds.: 40–4,000 RPM; 220 lb. tbl. load cap., 20 RPM 9.3 HP; retractable auto steady rest; chip con- Location rotary tbl., 20-position ATC, random tool selection, pallet changer, chip veyor; pwr. chucking, left and right head- conveyor, hyd. unit, tooling, S/N 65339. (Location W) stocks; tool probe, O.D. and I.D. (Location W) Index CNC VERTICAL MACHINING CENTERS HAAS MDL. VF-3, new 1998, 20" X 48" tbl., travels: 40" X, 20" Y, 25" Z, dual pallet changer, CAT 40, 20 HP, 7500 RPM spndl., 20 pos. ATC, 710 IPM brushless servos, Royal FX600 filter mist, S/N 14913. (Location H) (2) MORI SEIKI MDL. MV-40, new 1991, Fanuc 10M CNC control, (2) 15" x 35" shuttle pallets, travels: 30" X, 16" Y, 20" Z, 30-position auto. tool chang- er, 20 HP, 7500 RPM spndl., chip conveyor, S/N 2123, S/N 1722. (Location T) CNC FLATBED LATHE RYAZAN 26" X 120", 26.4" max. sw/o/bed, 12.8" max. sw/o/cross slide, 118.1" max. between centers, 2.75" spndl. bore, spds.: 8–2,000 FPM, feed range: .04–157.5 IPM, 383 IPM rapid traverse rate, 2,315 lb. cap. work- piece, 40 HP, 16" dia. 3-jaw pwr. chuck, 4 position I.D./8 position O.D. turret toolposts, (2) steadys, hyd. tailstock; coolant (unused–ready for retrofit– no drives or control), S/N N.A. (Location W) CNC SLANT BED LATHE RYAZAN MDL. HR630F3, 24.8" max. sw/o/bed, 19.68" max. workpiece sw/o/bed, 15.74" max. swing of workpiece o/carriage, 62.99" max. length of workpiece, spds.: 31.5–3,150 RPM, 3.81" spndl. hole, 393 IPM max. car- riage travel (X and Y), 3.93" tailstock quill dia., #6 MT taper, (12) tool posi- 2001 tions, 63 HP, 12" 3-jaw pwr. chuck, 12-position vert. turret; hyd. controlled tailstock; chip conveyor (unused–ready for retrofit–no drives or control), CNC S/N 6. (Location W) MAZAK QUICKTURN MDL. QT-300 CNC TURNING CENTER

CNC CNC HAAS MDL. VF-3 CNC VERTICAL MACHINING CENTER (1 OF 2) MORI SEIKI MDL. MV-40 CNC VERTICAL MACHINING CENTERS 2 3 AUCTION: THURSDAY SEPTEMBER 22 10:00 A.M.

INSPECTION: Tues. & Wed., Sept. 20 & 21 From 9:00 A.M. to 4:00 P.M. & Morning of Sale. Other Times by Appointment Only.

On-Site Bidding in Houston, Texas or Bid Via Webcast at CNC ACCURPRESS 400 T. X 20' CNC HYDRAULIC PRESSBRAKE

CNC HYDRAULIC PRESSBRAKE ACCURPRESS 400 T. X 20' CAP. MDL. 740020, new 1994, hy- draulic, Accurpress CNC backgauge system w/CRT display and pedestal type control, 240" bed, 173" between housings, S/N 2718. (Location F) CNC HYDRAULIC PLATE SHEAR WYSONG 12' X 1/2" CAP. MDL. H5012, new 1999, Mdl. PC100 programmable shear gauge control, 118" squaring arm, S/N H7- 110. (Location F) CNC PLATE BURNING SYSTEM MG INDUSTRIES 120" X 480" CAP., Burny 5 CNC control, 120" x 480" tbl. (in (2) sections), (4) oxy./acet. torches, S/N CNC C52130A179831. (Location F) WYSONG 12' X 1/2" CNC HYDRAULIC PLATE SHEAR CNC AUTOMATED STRUCTURAL BURNING/COPING SYSTEM PEDDINGHAUS MDL. ABCM-1250/3B, Fagor CNC control, 50" max. beam width, 3" min. beam width (w/simultaneous copes) and 3" (w/single cope); 24" max. flange ht., 6" max./1/4" min. material thickness (flange or web), (3) torches, probing, auto. web torch adj., (4) controlled axes, multi-axis positioning, flange beveling, auto. cutting routine, roller feed measuring, miter cuts, S/N 41441.(Location W) CNC BEAM PUNCH LINE PEDDINGHAUS MDL. BPL-1000/5, positions and punches beams, angles, flat stock, channels, etc., 100 T. cap., (5) punch assemblies, roller feed measuring system, max. workpiece weight: 12,000 lbs.; max. width cap. (Y-axis): 39-3/8"; max. flange height (Z and W axis): 15-3/4"; max. web thickness: 1-1/8"; max. flange thickness: 1-1/8"; cap., 25 HP motor, S/N BPL-120. (Location W) CNC PEDDINGHAUS MDL. BPL-1000/5 CNC BEAM PUNCH LINE

CNC CNC PEDDINGHAUS CNC AUTOMATED STRUCTURAL BURNING/COPING SYSTEM MG INDUSTRIES 120" X 408" CNC PLATE BURNING SYSTEM 2 3 1981

12-1/2" HOLE

WARNER & SWASEY MDL. 5A-M3600 LARGE CAPACITY SADDLE TYPE TURRET LATHE

CNC DRILLING, TURNING, & MACHINES (1 OF 2) MOTOMAN MDL. SUPER K120 ROBOTS (3) WERTH , Fanuc 11T CNC control w/CRT, 2" X-axis travel, 5" Z-axis travel, 20" Y-axis travel, max. dist., spndl. face to turret (Y): 35" max., 15" min.; dist., part centerline to turret (Z): 10.5" max., 5.5" min.; number of turret positions w/live tooling: 5; pocket numbers w/live tooling: 3, 6, 7, 8, LARGE CAPACITY SADDLE and 10; max. live tooling RPM: 2,000; spndl. spds.: 94–2,650 RPM; main motor: 25 HP, Allen Bradley Led DL20 display; live tooling; 12-position turret; aux. spndl.; hyd. center; coolant, Trabon auto lube, TYPE TURRET chip conveyor, a/c unit, S/N 6644-0988, S/N 7712-0292, S/N 7160-0991. (Location W) WARNER & SWASEY MDL. 5A-M3600, new 1981, 12-1/2" hole thru spndl., crossliding turret, CNC VERTICAL MACHINE front and rear taper attachs., full length lead- CINCINNATI CINTIMATIC, upgraded Fagor pendant CNC control, 27" x 40" tbl., 40" tbl. cross travel, 8" vert. threading, 1–36 TPI thread range, 5-posi- head travel, spds.: 85–3,400 RPM; 5.2 HP, one shot lube, S/N 1LP1T5M-151. (Location W) tion turret, (3) toolholders, approx. 60"L. x 6" dia. boring bar, rapid traverse, 4-jaw chuck w/12-1/2" CNC HORIZONTAL/VERTICAL MILLING MACHINE hole thru chuck, pan type bed, S/N 3046516. FIL FRESATRICI MDL. FA, Type FA200CNC, new 1997, horizontal spndl. w/swiveling vert. head mounted on (Location C) power overarm, 29" x 94" tbl., 78" X-axis longitudinal travel, 29" Y-axis cross travel, 39" Z-axis vert. travel, WARNER & SWASEY MDL. 5A–M3870, 36.5" 6613 lb. tbl. load capacity, Heidenhain Mdl. TNC 407 CNC control, S/N C-425. Large quantity tooling. (Lo- sw. o/ways, 104" spndl. nose to turret face, 9.25" cated in Oklahoma City, OK. Call PMI (713)691-4401 for Information to Inspect.) hole thru spndl., spds.: 20–281, feeds: .005–.167 IPR, spndl. nose: A1-20, fixed rear turret, 75 HP ROBOTS 220/440, (1) flanged tool holder, (1) slide tool, (2) MOTOMAN MDL. SUPER K120 MANIPULATIVE AND PALLETIZING ROBOT, Motoman control coolant. (No front carriage. Configured for - station. (Location T & Location F) ing and boring.) S/N 2208628. (Location K) WARNER & SWASEY SQUARE HEAD MDL. BORER M-3550 W/CROSSLIDING REAR TURRET, new SIP MDL. HYDROPTIC 7, 40.4" x 61.5" tbl., 55" tbl. travel, 40" head cross travel, 39-3/8" max. spndl. to tbl., 1983, 28-1/4" sw/o/way covers, 22-7/16" sw/o/ 12" quill travel, 63" between uprights, 4,500 lbs. tbl. cap., spds.: 40–2,000 RPM, feeds (spndl.): .016–.040 carriage, 9-1/4" spndl. hole, spds.: 10–526 RPM; IPR, feeds (tbl.): 0–20 IPM, SIP 31" optical dividing tbl., SIP 17 3/4" tilting rotary tbl., SIP boring heads, SIP hex turret, 24" 4-jaw chuck; hardened and ground optical devices, SIP tool holders, and SIP manuals, DRO, S/N TYPE H-7 NO. 20. (Location K) bedways, coolant, rapid traverse, 2-spd. 60/30 HP motor, S/N 3113039LOT872. (Location W) < RAM TYPE TURRET LATHE SIP MDL. YIH DEH MDL. YD-50, 16" swing, 12" collet nose HYDROPTIC 7 to turret face, hex turret, (7) collets – 5/8"–2", collet chuck and closer, 2" cap., bar feed, prod. cross slide w/(2) tool holders, 4-spd. motor, S/N 700011 (new 1981). (Location K)

LARGE QUANTITY CNC TOOLING FIL MDL. FA200CNC CNC HORIZ./VERT. MILLING MACHINE 4 5 ENGINE LATHES MORANDO, 44" sw/o/bed ways, 56" sw/o/in gap, 210" centers, 16" gap, 4" spndl. hole, spds.: 55–500 RPM; 32" 4-jaw chuck; hard- ways, (2) shaft supports, chuck guard, rapids, swivel compound (no threading or leadscrew), S/N 5209. (Location W) HANKOOK 38" X 120", 2.5" hole thru spndl., taper, (4) steadys, toolpost, inch/metric threading, no chuck. (Location H) LEBLOND 31" X 160" MDL. 25, 31" sw/o/bed, 22" sw/o/cross slide, 160" centers, spds.: 6–625 RPM, feeds: .004–.250 IPR, 3/4–46 TPI, 30 HP 220/440/3/60, (3) roller steady rests: 9"/18"/20" dia, 21" 4-jaw chuck, S/N NI1292 (disassembled for AMERICAN 27" X 240" ENGINE LATHE repair, hard ways removed for grinding, cross feed nut and screw and some carriage parts needed). (Location K) 38" AMERICAN 27" x 240", 17" sw/o/cross slide, spds.: 20–1200 SWING RPM, feeds: .0025–.150 IPM, threads: 1–60 TPI, 2-7/16" hole IN GAP thru spndl., spndl. nose: D1-8 camlock, 30 HP 220/440, coolant, taper, 21" 4-jaw chuck, (3) steady rests, hard replaceable bed ways, S/N 75665-57. (Location K) LEBLOND 25" X 156" GAP BED, 38" sw. in gap, 16" sw/o/cross slide, spds.: 12–1500 RPM, feeds: .002–.410 IPR, 20 HP 220/440, hard replaceable bed and cross slide ways, taper, cool- ant, 21" 4-jaw chuck, 9" steady, long. rapids, S/N 4NEL1686. (Lo- cation K) AMERICAN PACEMAKER 22" X 96", 22-1/2" sw/o/bed, 15" LEBLOND 25" X 156" GAP BED ENGINE LATHE sw./o/cross slide, 96" centers, spds.: 13–800 RPM; 2-1/4" spndl. hole, threading, 20 HP, taper, 18" 3-jaw chuck, steady, thread dial, S/N 70181-47. (Location W) 14" HOLE AMERICAN 20" X 78, Style C, 21-1/2" sw/o/bed, 20" sw/o/car- riage wings, 13" sw/o/cross slide, 78" centers, spds.: 15–1,630 RPM, 20 HP motor, pre-select zip shift spd. selection, taper, chip pan (for parts use), S/N 79195. (Location W) AXELSON 20" X 48", 20-1/2" sw/o/bed, 12-1/2" sw/o/cross slide, 48" centers, 2-1/16" spndl. hole, spds.: 9.5–961 RPM; threading, 19-1/2" bed width, 10 HP, 16" 4-jaw chuck, taper, tool post, hard- ways, thread dial, S/N 3248. (Location W) AMERICAN PACEMAKER 18" X 54", 18-1/2" max. sw/o/bed, 11- 1/4" max. sw/o/cross slide, 54" between centers: (27) spndl. spds.: 30–2,000 RPM; 2" spndl. hole, threading, 10 HP, 8" 3-jaw chuck, taper, hard ways, thread dial, S/N 76386-60. (Location W) AMERICAN PACEMAKER 18" X 54", 18-1/2" sw/o/bed, 11-1/4" sw/o/cross slide, 54" centers, spds.: 15–1,000 RPM; 1-3/4" ROMI 40" X 80" HOLLOW SPINDLE LATHE spndl. hole, threading, 7.5 HP, 10" 3-jaw chuck, taper, hard ways, S/N 69071-45. (Location W) SOUTHBEND TURN-NADO 17" X 60", 17-1/8" max. sw/o/bed, 9-1/2" max. sw/o/cross slide, 60" centers, spds.: 47–1,580 RPM; 56" SWING threading, 3-3/16" spndl. hole, 10 HP; 10" 3-jaw chuck, taper, IN GAP steady, thread dial, spndl. brake, quick change toolpost w/hold- ers, hard bed ways, S/N GJ3066. (Location W) MONARCH 16" X 54", 16-1/2" sw/o/bed, 9" sw/o/cross slide, 54" centers, spds.: 12–487 RPM; 1-9/16" spndl. hole, threading, 7-1/2 HP, 12" 4-jaw chuck, taper, thread dial, coolant, S/N 11192. (Location W)

LEBLOND REGAL 15" X 54", 15-1/2" sw/o/bed, 9-1/2" sw/o/cross MORANDO 44" X 210" GAP BED ENGINE LATHE slide, 54" centers, spds.: 30–1,200 RPM; 2-1/4" spndl. hole, 7.5 HP, servo-shift headstock, hardened and ground replaceable bed- ways, thread dial, taper, quick change toolpost, 12" 4-jaw chuck, HOLLOW GOV’T chuck guard (no tailstock), S/N 12C-1124. (Location W) REBUILT IN SPINDLE LATHE 1994 COLCHESTER 13" X 40", 13" sw/o/bed, 9" sw/o/cross slide, 40" ROMI 40" X 80", 40" sw/o/bed, centers, spds.: 40–2,500 RPM; 1-1/2" spndl. hole, threading, ap- 28-5/16" sw/o/cross slide, 80" prox. 10 HP motor, inch/metric threading, 8" 3-jaw chuck; cool- centers, 14" spndl. hole, A2-20" ant, thread dial, hard bed ways, S/N LSH40SILJ0001325025. spndl. nose, spds.: 23.6–450 (Location W) RPM; threading, 23-1/2" cross slide travel, 25-1/2" bed w., 50 TOOLROOM ENGINE LATHES HP, Forkhardt 32" 3-jaw self- MONARCH MDL. EE, new 1986, gov’t rebuilt in 1994, inch/metric, contained air chuck, hyd. trac- 12-1/2" x 20", 7.25" sw/o/cross slide, spds.: 5–4,000 RPM, 1-13/32" ing attachment, rapid traverse; spndl. hole, spndl. nose: D1-3 camlock, feeds inch/metric: .0005– 4-way toolpost, hardways (no .0161/.013–.406, threads inch/metric: 3–184/.25–11, 5 HP 460V, tailstock), S/N 1100193/230. DRO, taper, S/N 52617. (Location K) (Location W) MONARCH EE, gov’t rebuilt in 1989, 12-1/2" x 20", Fincor SCR drive, spds.: 0–4,000 RPM, feeds: .0005–.016 IPR, threads: See Page 15 3–184 TPI, 5 HP 480V, Sony 2-axis DRO, 3J and 4J chucks, collet nose/closer/collets, steady rest, taper, Aloris tool post w/blocks, for Equipment S/N 44591. (Location K) Location Index MONARCH MDL. EE TOOLROOM ENGINE LATHE 4 5 KING 62" VERTICAL TURRET LATHE BULLARD CUTMASTER 54" HIGH COLUMN VERTICAL TURRET LATHE

VERTICAL TURRET LATHES TABLE TYPE HORIZONTAL BORING MILLS KING 62", 62" dia. faceplate chuck, 70" max. swing, 60" max. ht. under GIDDINGS & LEWIS 5", Mdl. PC-5, 5" spndl., #50 taper, 36" spndl. travel, spndl. the cross rail, L.H. swivel boring ram, R.H. 5-position turret head, side spds.: 5.8–1,120 RPM, 72" vert. headstock travel, 48" x 96" tbl., 84" tbl. cross travel, head w/4-sided toolholder, spds.: 1.7–65.4 RPM, 25 HP motor, S/N N.A. 34" saddle travel, feeds (all axes): .0001–.125 IPR, rapid traverse rate (all axes): (Location C) 140 IPM, motors: 25 HP headstock, 10 HP feed, pwr. drawbar; hard ways, pendant, BULLARD CUT MASTER 54", high column, 5-position turret, side head coolant, inch/metric, outriggers, S/N 410-165-75. (Location W) w/4-position toolholder, 68" (est.) ht. under rail, 4-jaw chuck, KEARNS RICHARDS 3", Mdl. SH75, 3" spndl. dia., #40 taper, 20" spndl. traverse, 28" (est.) ram travel, S/N 27283. (Location C) 39-1/2" x 39-1/2" rotary tbl., 49" cross travel, 39-1/2" long. tbl. travel, 4,400 lb. max. BULLARD 54", Man-Au-Trol, 54" faceplate chuck w/4 master jaws, 64" tbl. load, 39" vert. headstock travel, (27) spndl. spds.: 6.8–1,370 RPM, (18) facing max. swing, (1) square vert. turret, (1) side head, 46" under rail, spds.: head spds.: 5.6–280 RPM; 20" dia. facing head, 34" facing head cap., 7" facing slide 4.4–160 RPM, feeds: .0007–.125 IPR, 40 HP 220/440/3/60, (vert. hd. traverse, 10 HP, S/N 7152. (Location W) removed for transport), S/N 25730. (Location K) PORTABLE BORING & FACING MACHINE BULLARD 42", Man-Au-Trol, 42" dia. 4-jaw chuck, 4-position square tur- MASTER MACHINE TOOLS 10,000 LB. CAP., spndl. spds.: 4-spd. gearbox, variable ret, side head, pedestal type control panel, coolant pan, S/N 26511. (Lo- spds.: 10–40 RPM; spndl./saddle travel:(Z-axis) 18", 50"L. x 25"W. bed; 22" dist. cation C) floor to top of ways; facing head toolholder, S/N 9072-GMC2-A. (Location W)

On-Site Bidding in Houston, Texas INSPECTION: Tues. & Wed., Sept. 20 & 21 See Page 15 or Bid Via Webcast at From 9:00 A.M. to 4:00 P.M. & Morning of for Equipment Sale. Other Times by Appointment Only. Location Index

3 AVAILABLE

KEARNS RICHARDS 3" TABLE TYPE HORIZONTAL BORING MILL (3) MASTER MACHINE TOOLS PORTABLE BORING AND FACING MACHINES 6 7 Surplus to the Ongoing Operations of FABCOR, INC., THE HAMMONDS COMPANIES, INC., HIPPO HOPPER DIV. OF FABCOR, & OTHERS Theater-Style Digital Color Slide Auction to Be Conducted at the GUESTHOUSE INTERNATIONAL/ A.K.A. HOLIDAY INN & SUITES 125 AIRTEX DRIVE, HOUSTON, TEXAS 77090 (See Directions on Back Page) AUCTION: THURSDAY, SEPTEMBER 22 BABIN MDL. 12" CIRCL-MATIC AUTOMATIC BOLT CINCINNATI BICKFORD 6' X 19" MDL. 10:00 A.M. CIRCLE DRILLING MACHINE SUPER SERVICE RADIAL ARM DRILL

AUTOMATIC BOLT CIRCLE DRILLING MACHINE GIDDINGS & LEWIS BICKFORD 6' X 15" MDL. CHIPMASTER, 6' arm, 15" BABIN MDL. 24, 0"–26" standard bolt circle range dia., standard division of equal- column, spds.: 14–1,750 RPM, feeds: .004–.097 IPR, thread leads: 8, 11.5, ly spaced holes: 4, 5, 6, 8, 10, 12, 16, 20 and 24; 33" max. I.D. chucking workpiece 14, 18, 20, 27, #5 Morse spndl. taper, 20.5." spndl. travel, 68" max. base to dia., 26" max. O.D. workpiece, 2-1/8" max. drill size in carbon steel, 900 lb. max. spndl. nose, 15 HP 220/440, rapid traverse to head, pwr. clamping/elevation/ tbl. load cap, 7.5 HP, spndl. spds.: 33–530 RPM (infinite); 6" max. spndl. travel, #5 head traverse, coolant, dual T-slotted bases, S/N 954-00114-64. (Location K) MT spndl. taper, 32" chuck, coolant, S/N ADP-120. (Location W) OOYA 4' X 13" MDL. RE2-1300, 4' arm, 13" column, spds.: 32–1,985 RPM, BABIN MDL. 12" CIRCL-MATIC, 12" dia. 3-jaw chuck w/extended jaws, approx. feeds: .003–.0391 IPR, 65" max. spndl. to base, removable risers, 2.2 KW 8" manual column adjustment, RPM dial from 150–900 RPM, push button con- 220/440, #4 Morse spndl. taper, plain box tbl., S/N 68-2839. (Location K) trols, S/N 12-204. (Location C) IKEDA 11" X 4' MDL. RM1000, 11" column width, 4" long arm, new 1976, S/N MULTI-SPINDLE DRILL 75089. (Location H) MOLINE MDL. HF160NC INLINE RAIL TYPE, 25" spndl. cap., 145" L-R x 169" F-B MISCELLANEOUS MACHINERY tbl., approx. 120" Y-axis tbl. travel, 175" dist. btn. uprights, approx. 30" vert. rail travel: 100 HP main motor, 20 HP hyd. motor, Moline multi-numeric controls, & PLANT SUPPORT EQUIPMENT Westinghouse N/C tape reader, Wizard Mdl. 800 D.R.O., auto. lube system, elec- G&P HEAVY DUTY GRINDING POLISHING MACHINE, Mdl.–VS500, 5 HP, 230 trical cabinet, way covers, hyd. unit, (6) 1" risers on tbl., rapid traverse, 145" L-R volts, 3 phase, 60 cy., variable spd.: 950–2,650 RPM, S/N G-9136. (Location K) x 169" F-B sub-tbl., S/N 684231. (Location W) WARNER & SWASEY STEADY REST, roller type, for 3A saddle type turret RADIAL ARM lathe, 1"–6" dia. cap., (3) rollers–2"Dia. x 7/8"W. (Location K) CINCINNATI BICKFORD 6’ X 19" MDL. SUPER SERVICE, 6' arm, 19" dia. column, BORING MILL TYPE , 60" x 60", pneu. operated; CARBOLOY spds.: 12–1500 RPM, feeds: .004–.025 IPR, 20" spndl. travel, thread leads: 8, 11.5, HEAVY DUTY DOUBLE END CARBIDE GRINDER, (2) 14" dia. grinding 14, 18, 20, 27 TPI, #6 Morse spndl. taper, L base, pwr. traverse to head, pwr. clamp- wheels, (2) 22" x 10" work suppts.; DISC SANDER, 15-1/2" dia. disc cap., 5 ing to arm/column/head, coolant, 28" x 40" box tbl., S/N 6E896. (Location K) HP motor. (All at Location C)

PARTIAL VIEW OF MOLINE MDL. HF160NC MULTI-SPINDLE INLINE GIDDINGS & LEWIS BICKFORD 6' X 15" MDL. CHIPMASTER RADIAL ARM DRILL RAIL TYPE DRILLING SYSTEM 6 7 LARGE CAPACITY

CINCINNATI VERCIPOWER MDL. 650 VERTICAL MILL DAITO MDL. WONDER 250 B AUTOMATIC DOALL MDL. 3620 ZW HIGH-SPEED HORIZONTAL BANDSAW VERTICAL BANDSAW

VERTICAL MILLS COMBINATION VERTICAL K&T #3 PLAIN MDL. CSM, 15" x 74" tbl., 36" tbl. travel, CINCINNATI VERCIPOWER MDL. 650, 20" x 104" & HORIZONTAL MILLING 15" saddle travel, 15" knee vert. travel, spds.: 25–1,250 tbl., 50" tbl. travel, 18" saddle cross travel, 28" RPM, feeds: 3.8–90 IPM, 30 HP 230/460 3 ph, arbor MACHINE support, coolant, #50 taper, S/N 6-5561. (Location K) vert. head travel, spds.: 14–1,400 RPM, feeds: SHIZUOKE MDL. YHR-G, 11" x 43-1/2" tbl. work- 3/8"–90 IPM, #50 taper, 3" quill adj., 50 HP ing surface, tbl. travel: 32.3" long.; 12.8" cross; K&T MILWAUKEE MDL. 650TF-20, 19.5" x 107.5" tbl., 230/460/3/60, outboard tbl. supports, rapid tra- 17.7" vert.; spndl. taper: No. 50 horiz.; No. 40 spds.: 7.5–1,500 RPM, feeds: 3/16–45 IPM, S/N N.A. verse all directions, pwr. tool lock, S/N vert.; spndl. spds.: 90–1,400 RPM horiz. and (Location H) 311063V5U-2. (Location K) 75–2,600 RPM vert.; spndl. feeds: (3) .0015, HERCULES MDL. 3P W/VERTICAL ATTACHMENT, 63" K&T #4 MDL. 415, 17" x 80" tbl., 42" cross travel, .003, .006 IPR; tbl. feeds: (9) 5/8–28-5/16 IPM; x 12" tbl. working surface, spndl. spds.: 56–1,503 RPM, 18" saddle travel, 16" knee vert travel, 6" head vert motors: 2.5 HP vert. and 5 HP horiz., S/N 82007. feed range: 32" long.; 10" cross; 12" vert.; ram travel: travel, spds.: 15–1,500 RPM, feeds" 3/8–90 IPM, (Location W) 16"; vert. head, S/N 1770. (Location W) #50 spndl. taper, 15 HP 380-420V, side controls, pwr. draw bar, S/N 415-4045. (Location K) BENCH TYPE VERTICAL VERTICAL BANDSAWS MILLING/DRILLING DOALL MDL. 3620 ZW HIGH SPEED, 30" x 36" tbl., 19" x CINCINNATI MDL. 207MK, 13-3/4" x 59" tbl., 19" secondary tbl., spds.: 40–9,000 FPM, 5 HP 480V, FPM travels: long.–33-1/2"; cross- 13-3/4"; vert. travel MACHINE gage, blade welder/grinder, S/N 266-74180. (Location K) of knee: 18-3/4"; pwr. rapid traverse, spds.: 25– UNICUT, 9-1/2" x 23-1/4" tbl., travels: 15" long., 6" tbl. cross, 15" spndl. to tbl., 5" spndl. travel, up to POWERMATIC MDL. 87, 19-3/4" throat, 12" max. depth 1,500 RPM; #50 taper, 7.5 HP main, coolant, hard- of cut under guide, 24" x 24" tbl., tilting tbl., 3/8"W. x ened/ground ways, rapid traverse, S/N 2,120 RPM, 2 HP 230/460/3/60, 360 deg. swive, S/N 37560. (Location W) 149"L. blade, spds.: 475–5,000 SFM, blade welder, S/N 13J23V1AFE-2. (Location W) 387142. (Location W) HORIZONTAL DELTA MDL. 20, 19-3/4" throat, 24-1/2" x 24-1/2" tbl., tilt- VERTICAL TURRET MILLING MACHINES ing tbl., variable spds.: 50–4,500 SFM; 1" W. x 150" blade; 2 HP, Rockwell blade welder, miter unit, S/N 85K25765. MILLING MACHINE K&T RISE & FALL PRODUCTION MILL MDL. (Location W) ENCO, 10" x 54" tbl., travels: 38" (long.); 14-1/2" 1224, 24" tbl. travel, feeds (tbl.): 2.96–40 IPM, (cross); 18" (vert.); variable spds.: 80–4,200 feed (head): .3–18 IPM, spds.: 50–1,500 RPM, HYD-MECH TILT FRAME MDL. V-12A, power infeed, RPM; 5" quill travel, R-8 taper, turret rotation: #40 spndl. taper, 3" quill adj., 5 HP, 3-headed in- pwr. clamping, S/N N.A. (Location H) 360 deg.; 2 HP, pwr. tbl. feed, 1-shot lubrication, dexer, spndl. reverse, auto-cycle, arbor support, S/N 10094. (Location W) S/N 82-1002-10. (Location K) AUTOMATIC HORIZONTAL BANDSAWS DAITO MDL. WONDER 250 B, 10" round cap., 10" x 10" < SHIZUOKE MDL. YHR-G cap. square, 1.25" blade width, 5 HP drive motor, 2 HP COMBINATION VERTICAL AND HORIZONTAL hyd motor, 16" max. work piece feed length, S/N MILLING MACHINE 42U10583. (Location K) HYD-MECH MDL. S-20P SEMI-AUTO., 13" x 18" cap., pwr. clamping, 5.2 HP motor, coolant, S/N 40795307. (Location H) MITER CUTTING HORIZONTAL BANDSAW FMB, 7-3/4" round cap., 7-3/4" x 7-3/4" square cap., an- gle swivel: 60 deg. right; 45 deg. left; blade size: 1", manual vise, 1.5 HP, S/N 8804005. (Location W) AUTOMATIC CIRCULAR COLD SAW BURKHARDT & WEBER MDL. HKSA450, 20" max. blade dia., cap.: 7-1/8" round; 6-1/4" square; 12-spd. range: 16–106 RPM, 7.5/3.75 HP 2-spd., S/N 14374. BURKHARDT & WEBER AUTOMATIC (Location W) CIRCULAR COLD SAW 8 9 < SODICK MDL. AQ55L 4-AXIS 2006 CNC RAM TYPE EDM MACHINE AUCTION: THURSDAY, SEPTEMBER 22 10:00 A.M.

On-Site Bidding in Houston, Texas or Bid Via Webcast at

INSPECTION: Tues. & Wed., Sept. 20 & 21 From 9:00 A.M. to 4:00 P.M. & Morning of Sale. Other Times by Appointment Only. See Page 15 for Equipment Location Index

> STUHLMAN HYDRAULIC MDL. CNC POLY-50 HYDRAULIC KEYSEATER

CNC RAM TYPE EDM MACHINE VERTICAL BROACH SODICK MDL. AQ55L 4-AXIS, new 2006, Sodick LQ1 CNC control, 29.55" x LAPOINTE MDL./TYPE- VU-1, hydraulic, 36" stroke, 20 HP 220 volt, coolant, 21.67" tbl., internal tank dims: 37" x 29" x 16", 55-gal. machining tank cap., 451 hours-on-meter (from gov’t. storage), S/N 53043. (Location K) 21.64" X-axis travel, 15.76" Y-axis travel, 13.79" Z-axis travel, 110 lb. max. suspension weight, 2,200 lb. max. workpiece weight, C-axis rotation, Erowa BOX COLUMN DRILLS electrode chuck w/controls, linear motor drive, drop down work tank, Sodick ALLEN, new 1986, 21" x 24" tbl., 17" tbl. vert. travel, 17" head vert. travel, spds.: Mdl. 40B pwr. supply booster, C-axis rotation, 80 amps total power (40 amp 50–1,800 RPM, variable spd. (back gear and direct drive), feeds: .0025–.040 pwr. supply w/40 amp booster), (2) Oilmatic die electric chiller units, S/N IPR, 10" quill stroke, #4 Morse spndl. taper, 5 HP 230/460/3/60, S/N N.A. (Lo- 0194. (Photo is of unit prior to removal. Currently disassembled for transport- cation K) ing to storage site.) (Location C) CLEEREMAN, 24" x 24" T-slotted base, spds.: 75–1,500 RPM, feeds: .001–.010 IPR, 16" hd. vert. travel, 8" spndl. travel, #4 Morse spndl. taper, 5 HP 220/440/3/60, ELECTRICAL DISCHARGE MACHINE coolant, 12-spndl. U.S. drill head, (No Table) S/N 300773 (Location K) & ACCESSORIES CINCINNATI BICKFORD 21", (9) spndl. spds.: 100–2,000 RPM, #4 MT spndl. EASCO SPARKATRON PLUNGE TYPE MDL. BOL-346, travels: 60" X, 8" Y, 36" taper, 2-7/8" spndl. dia., feeds: .004, .008, .014 and .020 IPR, 16-1/2" x 21" tbl. Z, dual electrodes, 2" dia electrode bars, 35" x 48" T-slotted work surface, 47" working surface, 3 HP, 1,755 RPM, S/N 1L2861. (Location W) x 76" x 36" Dp., work tank, Sparkatron Mdl. 200 control, 100 amps/electrode, 440 volt, S/N 876952. (Location K) CINCINNATI BICKFORD 21", 12" vert. head adj., vert. spndl. travel: 9-3/4" (pwr.) and 10" (manual); #4 MT spndl. taper, 2-7/8" spndl. dia., 5 HP, S/N 1L801. (Lo- DIELECTRIC SYSTEM, tank, pump and filter system from EDM, 2 HP and 3/4 cation W) HP pump motors, 208/220/440/3/60, 78" x 96" x 120" Ht. o.d., S/N N.A. (Location K) PIPE & BOLT THREADING MACHINE LANDIS MDL. 16C DUAL SPINDLE, new 1986, 2" max. cap., #16T heads 1/2"– HYDRAULIC KEYSEATER 2", RH and LH eng. threads, 1/4"–2" RH and LH pipe, 7.5 HP, 230/460 volt/3 Ph., STUHLMAN HYDRAULIC MDL. POLY-50, 2" max. keyway, 22" max. stroke, (9) spds.: 28, 38, 49, 64, 66, 69, 86, 118, 154 RPM, pendant on/off, emergency strokes (var. hyd): 0–12 SPM, 5.5 KW 480V/3PH/60CY, 25" dia. index tbl. stops, cutting oil system, S/N 16CNCA-187. (Location K) w/120 divisions, (1) 1" keyway cutter, S/N 500-10-234, new 1977. (Loca- tion K)

HYDRAULIC BULLDOZER PRESS 1986 NORDBERG LARGE CAPACITY (See Photo Below).

< NORDBERG HYDRAULIC BULLDOZER PRESS

> LANDIS MDL. 16C DUAL SPINDLE PIPE AND BOLT THREADING MACHINE 8 9 19.25" HOLE

BRYANT MDL. 2440RY LARGE CAPACITY HOLLOW SPINDLE INTERNAL GRINDER MATTISON 12" X 36" HYDRAULIC SURFACE GRINDER

LARGE CAPACITY HOLLOW SPINDLE TOOL & CUTTER GRINDER INTERNAL GRINDER CINCINNATI NO. 2, 10" sw., 27" btn. centers, 5-1/4" x 36" tbl., 16" long. travel, 8" cross travel, 180 deg. swiveling tbl., 10-1/2" vert. travel of grinding wheel spndl., BRYANT MDL. 2440 RY, 19.25" hole thru spndl., 40" max. part dia., 48" max. 240 deg. swivel of grinding wheel spndl., 1 HP, dbl. swivel vise; adjusting screw, grinding stroke, 14" cross slide travel, workhead spds.: 72–192 RPM, 54" swivel tbl., S/N 1D2T1R-218. (Location W) hole thru headstock, contour grinding capability, motorized central lube, 40" front and rear faceplate chucks w/master jaws, (1) 4" dia. x 28" grinding PLAIN HYDRAULIC CYLINDRICAL GRINDER spndl., 20 HP workhead, 10 HP grinding spndl., wheel dresser, S/N W10828. CINCINNATI 10" X 36", 10-1/2" max. sw./o/bed, 36" btn. centers, infeed of (Location K). wheelhead: 0"–.999" (.001" increments); 30" dia. x 6" w. grinding wheel, (6) workhead spds.: 40–245 RPM, motorized workhead, tailstock, pickfeed, cool- HYDRAULIC SURFACE GRINDERS ant, workhead jog, gap eliminator, truing, taper to tbl., Acrasize II controls, MATTISON 12" X 36", 12" x 36" mag. chuck, 20" x 1.5 wheel size, 16" max. ht. telescoping way covers, gauging, Encyclone filtration unit, S/N 3538-2D77- under wheel, hyd. tbl. trav.: 0–100 FPM, hyd. downfeed/tbl. travel, pwr. wheel 001. (Location W) hd. elevation, 15 HP spndl. motor 220/440V, 3 HP hyd motor 220/440V, S/N 2256. (Location K) HYDRAULIC HORIZONTAL ALLIANT 12" X 24", 18" ht. under wheel, 12" x 1" grinding wheel, 5 HP motor, hyd. EXTERNAL HONING MACHINE long. and cross feeds, pwr. wheel elevation, wheel dresser, hyd. unit, coolant BARNES MDL. 5E, swing: not less than 12" dia.; honing cap., up to 6" dia., tank and pump, S/N 0101245-1. (Location W) length of stroke, 2"–12' adj. (carriage travel), 10–100 FPM rate of carriage trav- el, variable spndl. spds.: 50–473 RPM, 2'–12' btn. centers, #5 MT spndl., 15 HP, DOALL 10" X 30", Mdl. D-10, 10" x 30" chuck, 10" x 30" tbl., 14" x 1" x 3" grinding coolant, magnetic and fabric filtration (From U.S. gov’t. reserve), S/N ZP11047. wheel, 12" x 32" tbl. traverse, 12-1/2" work ht., long. tbl. spd: 5–75 FPM, auto. (Location W) transverse feed: 0"– 250", variable wheel dressing spds.: 0–60 IPM, hand trans- verse feed: (increments) .0002"; vert. wheel head adj.: .0001"; wheel surface VIBRATORY FINISHING MACHINE spd.: 6,000 FPM; 10" x 30" mag. chuck; pendant, coolant, S/N D10-3-4053131. SWECO MDL. FMD-10HA, 10 cu. ft.; 2,500 lbs. load cap., 44.75" inside bowl (Location W) dia., 24" max. straight part length, 5 HP, ribbed polyurethane liner, S/N 10FM- GALLMEYER & LIVINGSTON 8" X 24", Mdl. 350, long. 29-1/2" tbl. travel, 9-1/4" 370-23. (Location W) transverse, 8" x 24" tbl. working surface, tbl. spds.: 3"–150' per/min; 16" vert. movement of wheelhead, 12" x 1" x 3" wheel, 15" wheel to tbl. w/new wheel, VIBRATORY DEBURRING spndl. spds.: 2,000 and 2,400 RPM, 3 HP, pwr. incremental downfeed and & FINISHING MACHINE wheelhead elev., coolant, wheel dresser; auto. lube., no chuck, S/N 350427. ELLIOTT “VIBRASLIDE FINISHER” MDL. 20-2, simultaneous rotation and (Location W) vibration, S/N 7512245. (Location C)

On-Site Bidding in Houston, Texas or Bid Via Webcast at

REBUILT 2000

ELLIOTT VIBRATORY DEBURRING BLISS MDL. C-60 60 T. CAP. OBI PINES MDL. 5T HYDRAULIC VERTICAL TUBE AND FINISHING MACHINE PUNCH PRESS BENDER 10 11 1999

2007

< (2) WELD ENGINEERING MDL. MIGHTY-MAC RETROFIT WELDING FLUX 2002 RECOVERY CNC UNITS MEMOLI MDL. EUREKAMATIC COAST MDL. 4HRD-B-PC CNC HYDRAULIC TUBE BENDER TUBE BENDER

BAR SHEAR PARALLEL SEAL PRESSES SINGLE END PUNCH CLEVELAND 2", 7-1/2 HP motor, S/N N.A. (Location W) (5) ACAL 8 T. CAP., 19-1/2" L-R x 10" F-B dist. be- ROPER WHITNEY 8 T. CAP., Mdl. 134, 10" throat tween uprights, 16" x 14" working surface of tbl., height at ram, 24" throat depth, 1" length of stroke, MECHANICAL IRONWORKER 35" dist. floor to tbl. top, 11-1/2" dist. ram to tbl. top, 3/4" ram adjustment, S/N 221194. (Location W) MUBEA 88 T. CAP. Mdl. KBL900, length of stroke 3-1/2" vert. tbl. travel, 3.5" cylinder bore, pump – 1-1/4"; dia. thru thickness – 1-1/4" thru 13/16"; pressure: 1st stage–325 PSI, 2nd stage–10,000 COIL FEEDING EQUIPMENT 1-1/16" thru 1"; 46 strokes per min., shear, coper, PSI, dbl. action hyd. cylinder, fixed posts parallel ROWE MDL. 40-20J, 20" w. x 50" o.d., 4000 lb. notcher, 5.5 HP, S/N 0506281739427. (Location W) frame, shuttle loading tbl., Led display, S/N N.A. max. coil cap., S/N 26-280; ROWE MDL. 2015J- (Location W) PR, 15" w. x 40" O.D., 2000 lb. max. wt., S/N 28988; HYD. DIE CUTTING PRESS CMP MDL. RF121LH, 12" w. cap., S/N 0763. (All at SAMCO 70 T. CAP. FLOOR STANDING, dist. be- LARGE CAPACITY Location H) tween posts: 70" L-R; beam (cutting area): 66" L-R CNC TUBE & PIPE BENDERS x 22" F-B; shuttle tbl.: 67" L-R x 48" F-B; stroke of 4" COAST MDL. 1004-CNC-ANC, new 1991, hy- WELDING POWER SOURCES beam: 6.75" max.; daylight: 8" max.; dist. floor to draulic, Allen Bradley PLC-5 controller, operator’s BANKROFT MDL. 300 WELDA-ROUND AUTOMAT- shuttle tbl.: 37"; motor: 15 HP, S/N N.A. (Location W) console, color display, 4" IPS SCH. 80 carbon steel ED, for flat circular or contour welds, w/Miller Mdl. bending cap., 195 deg. max. degree of bend, clock- XMT304 CC/CV 300 amp cap. power supply; MILL- PRESSES wise rotation, 1.6 RPM bending speed, 67,000 ft. ER MDL. MP-30E 300 AMP, w/Miller Mdl. 10E wire BLISS 150 T. CAP. MDL. S2-150-48-30 STRAIGHT lbs. max. bending torque, 40 HP 480/3/60 main feeder; MILLER MDL. 250TS 250 AMP CAP; JAN- SIDE PUNCH PRESS, 48" x 30" bed, air counterbal- motor, S/N 1004-91-400. (Location W) DA SPOT WELDER. (All Location H) ance, S/N N.A. (Location F) 4" COAST MDL. 4HRD-B-PC, retrofit 2002, hy- MILLER 275 AMP CAP. MDL. M-295P, A.C. arc ROUSSELLE 100 T. CAP. DOUBLE CRANK OBI draulic, Digitron Electrics retrofitted controls with welder, low amps 25–100, high amps 80–275, PRESS, Mdl. 10B80, 8" stroke, 14" shut height Allen Bradley Panelview 1000 control, color display, 230/460 60 cy, single phase, S/N S408732. (Loca- (SDAU), 4" ram adj., 22" x 80" bed, 12" x 62" bed operator’s console, 4" IPS SCH. 80 carbon steel tion K) opening, 12" throat, 16" x 72" area of slide, 60" w. bending cap., 185 deg. max. degree of bend, clock- opening in back, 50 SPM; 10 HP; air clutch and wise rotation, 3 RPM bending speed, 40 HP main WELDING FLUX brake; air counterbalances; auto. lube; 2-3/4" thick motor, S/N 4HRD-B-PC-81-223. (Location W) RECOVERY UNITS bolster plate, S/N 19736. (Location W) (2) WELD ENGINEERING CO. MIGHTY-MAC, new BLISS MDL. CH-75 75 T. CAP. C-FRAME PRESS, MISC. BENDING MACHINES 2007, each consisting of: Mdl. PFR-3000-200-100, 3.5" slide adj., 2.5" stroke, 17.5" shut ht., 24" x 36" WYSONG & MILES 1/4" CAP. X 4' W. POWER 150 lb. cap. hopper/separator, 100 lb. cap. pres- bolster plate, 20" gap in side frames, S/N H57234, PLATE ROLL, 5" dia. rolls, 5 HP. (Location F) sure tank and Mdl. SPS-1500, 1-1/2 HP flux recov- w/Coe Powerline feeder. (Location F) LOWN MDL. B400 SHEET METAL ROLL, 5' w. cap., ery unit, S/N 114480W, S/N 114479W. (Location C) BLISS MDL. C-60 60 T. CAP. OBI PUNCH PRESS, 4" dia. rolls, 1.5 HP motor. (Location F) INVINCIBLE MDL. 490, recovery cap.: 7-1/2" hose– 3" slide adj., 4" stroke, 14-3/4" shut height, approx. MEMOLI MDL. EUREKAMATIC TUBE BENDER, 25; 10' vert.–22; rise (lbs. per min.) i.d.–10; 1.5 HP, 21" x 30" bed, S/N H69458. (Location F) new 1999, 220 Kg cap., some dies, S/N 0300. (Lo- synch. valves; 4-stage turbine type vacuum, S/N BLISS MDL. 21S 45 T. CAP. OBI PUNCH PRESS, cation F) 47K660. (Location W) mechanical, air clutch, Triad safety light system, TELEDYNE PINES ROTARY PIPE BENDER, S/N 19-1/2" x 29-1/2" bed, S/N H3377/HP172641951. 401071366. (Location F) (Location F) PINES MDL. 5T HYDRAULIC VERTICAL TUBE HYD. C-FRAME PRESS BENDER, rebuilt 2000 by Techno Industrial Machin- DENISON 15 T. MDL HA15-C, 12" ram stroke, 10" ery, bending cap.: 1-1/4" x .065" wall (1 tube); 1" x throat, 16-7/8" ram to bed max, 16" x 24" bed, 15 HP .065" wall (2 tubes); max. bend angle: 100 deg.; 1,000 220/440/3/60, S/N 11965-29024B-P-9. (Location K) bends per hour; 20 HP motor, digital dial-a-bend; dual die holders, S/N 4435063005. (Location W)

See Page 15 for Equipment < WYSONG & MILES Location 1/4" X 4'W. POWER PLATE Index ROLL MUBEA 88 T. CAP. MECHANICAL IRONWORKER 10 11 EXTRUSION EXTRUDER ON POWER TRAVEL CAR NRM 3.5", new 1997, 75 HP, 750/2100 RPM w/vari. spd. drive, air cooled, sgl. screw., Hayden air cooler, NRM trans- mission S/N T-78035; gear ra- tio – 24.88:1; 100 HP motor, 1,750 max. RPM, roller spd. operator control station; pres- sure meters for head brake and head extend and sensor, mounted on variable spd. travel car, extra screw and barrel, re- mote control pendant, air re- BLASTRACK RIDE-ON TYPE PAINT STRIPPING SYSTEM ceiving tank, motor circuit con- trol w/(3) temp. zone meters, S/N T78035. (Location W)

AUCTION: THURSDAY, SEPTEMBER 22 • 10:00 A.M.

INSPECTION: Tues. & Wed., Sept. 20 & 21 From 9:00 A.M. to 4:00 P.M. < JONES & LAMSON & Morning of Sale. Other Times by Appointment Only. 30" DIA. OPTICAL COMPARATOR

OPTICAL COMPARATOR OIL SEALED ROTARY PISTON LIQUID STORAGE JONES & LAMSON EPIC MDL. 20, approx. 5,200 VACUUM PUMPS CONTAINERS lb. cap., 30" dia. screen, 8-1/2" x 32" work tbl., 12" (2) STOKES MDL. 412H-11 MICROVAC, displace- (7) LIQUITOTE 300 GAL. CAP., 42" L. X 48" W. 45" long. tbl. travel, 9" cross travel, 30" throat, D.R.O., Ht., tare weight: 440 lbs., max. gross weight: 5,192 ment (swept volume): 510 m3/h, 300 CFM, 490 twin spndl. tbl.; 6-position pwr. lens, pwr. tbl. tra- lbs., 2" bottom discharge, one-piece sloped bot- verse, pwr. tbl. elevation, S/N E72247. (Location W) RPM rotation, connections: inlet–4" flange; ex- tom, S/N N.A. (Location W) haust–3" flange/3" NPT, oil capacity: 12 gals., water COORDINATE MEASURING cooled, 10 HP, S/N CB-83997-12, S/N CB-83997-9. PAINT STRIPPING SYSTEM MACHINE (Location W) BLASTRAC, ride-on type, LPG fuel, Kohler Com- MITUTOYO BRIDGE STYLE, 28" X-axis travel, 24" mand 25 engine, removes paint from concrete Y-axis travel, 18" Z-axis travel, 50" L-R x 43-1/2" F-B COOLANT FILTRATION UNITS floors. (Location H) x 8" thk. tbl., 33" dist. floor to tbl. top, 38" dist. btn. (2) MART MDL. EQ-1, 250 gal. cap., 125 gal. upper frame uprights, GeoPack Version 3.1 software BLAST CABINET and lower mixing tank cap.: 125-gal., low water dis- package, Mitutoyo MAG-1 control box, Arrow air BLAST-IT-ALL, side loading, double door, inside dryer, misc. tooling and accessories. (Location W) charge pump cut-off, rinse system to flush upper dimensions: 48" L-R x 32" F-B x 28.5" ht., 20" tbl., tank, site glass for solution level detection, S/N approx. 600 CFM, 1 HP, PSI gauge, window, S/N PARTICLE INSPECTION N.A. (Location W) 0081081702. (Location W) MACHINE DUST COLLECTOR MAGNAFLUX MDL. H-840R, 10,000 amp max. PARTS WASHERS KELLER SURFACE FILTER DUST EXTRACTOR, output, duty cycle max. 1/2 second on and 20 sec- ZEP “DYNA BRUTE,” 35-gal. tank, pump cap.: up Mdl. Vario T 2.5 60 HZ, new 1999, 7.5 KW, S/N onds off, S/N 861360. (Location C) to 3 gpm; 35"W. x 23-1/2 dp. x 16-5/8" tank, 16 ga. 03.PAA/99.00125.0110. (Location H) steel, filtration system, S/N N.A. (Location W) METALLURGICAL LAB EQUIP. LARGE CAPACITY & SUPPLIES MAGNUS MDL. AL, Size 2, 450 lbs. load cap., 95 gal. tank, 9 KW heating cap., 30" L-R x 22" F-B x 28" HYDRAULIC MOTOR & PUMP ACCO WILSON BRINELL TYPE HARDNESS TES- WESTINGHOUSE 1,250 HP MOTOR, hydraulic TER, S/N 81243; VERSITRON ROCKWELL TYPE ht. inside tank, 29" x 18" tbl./grate size, approx. 26" pump and control, electric motor driving dual var. HARDNESS TESTER , digital Versitron control. (All vert. travel, electric heating; pneu. vert. tbl. travel, displacement pumps; motor controls by Amerimex at Location H) manual top opening, S/N 51751. (Location W) Motors Inc., S/N N.A. (Location W)

WESTINGHOUSE 1,250 HP MOTOR AND PUMP PR MACHINERY MDL. BTD AUTOMATIC PIPE PARTIAL VIEW OF SUHNER DRILL HEADS CUT-OFF 12 13 UNUSED

8' X 12' X 8' HT. PORTABLE ROTARY AIRE 350 HP ROTARY SCREW TYPE AIR COMPRESSOR PORTABLE WELDER/GENERATOR/ TOOLROOM (INTERIOR W/GHH-RAND HEAD AIR COMPRESSOR VIEW)

ROLLER DRAWER TOOL STORAGE CABINETS DETECTO 4' X 4' PLATFORM SCALE WITH DIGITAL READOUT; BURGMASTER (10) 12-DRAWER, 27-3/4" w. X 30" dp. X 57" ht.; (16) 11-DRAWER, 27-3/4" w. VERTICAL TURRET DRILL, 6-head, manual feed; (2) 5' L. X 20" W. MACHINE X 30" dp. X 57" ht.; (4) 11-DRAWER, 22-1/2" w. X 30" dp. X 57" ht.; (12) TABLES, w/2.5" coolant trough; HYPNEUMAT 2-STATION VERT. DRILLING 5-DRAWER, 27-3/4" w. X 30" dp. X 57" ht. All have key locking drawers, safety SYSTEM, pneu. feed, 92" x 68.5" work tbl. w/coolant channels, 58" x 79" en- release levers, light beige color. Most appear to be unused in original factory closed machining area, pedestal control; PR MACHINERY MDL. BTD AUTO- packaging. (Location C) MATIC PIPE CUT-OFF, hyd. drive motor; CLAUSING TEST STAND, 2' x 10' work table, outboard accumulator stand w/reservoir; CUSTOM GRINDING PORTABLE TOOLROOM BOOTH, 10' w x 90" ht. X 24" dp., 6 stations; MATTHEWS MARKING MA- 8' X 12' X 8' HT. CONSISTING OF: Aluminum housing, skidded, insulated, 115V CHINE, S/N 055; DUST PROOF CABINET, front and rear glass panels; ASI wiring, florescent lighting. Vidmar Cabinets: (2) 11-drawer 59" h x 29" w , (1) 5 CONTROL CABINET, w Allen Bradley 9/Series CRT control panel; TOOL STOR- drawer 59"H x 29"W, (4) one door/one shelf 24"H x 29"W, (2) single door/2 AGE LOCKER; 9" O.D. FLANGES; LOUVERED VENTS, 5' w. x 4' ht.; (2) CHIP shelves: 59"H x 29"W., (1) double door/2 shelves: 59"H x 45"W., (1) universal BLASTER HIGH PRESSURE HIGH VOLUME COOLANT SYSTEMS; (200+) 48" key for all cabs. (Location K) x 42" PLASTIC PALLETS; RUBBER BELTED INCLINED CONVEYOR, 24"W. x 10'L.; ASSORTED SIZES COLLAPSIBLE WIRE BASKETS; EXHAUST BLOW- SCREW TYPE AIR COMPRESSORS ER, 30"Dia. fan, 2 HP motor; ASSORTED PUMP/MOTOR ASSEMBLIES; OP- ROTARYAIRE 350 HP MDL. 0-350, unused, GHH-Rand head, 1500 CFM, 125 ERATOR STYLE WINDOWS, 48" x 36" aluminum. (All at Location H) PSIG op. pressure, 460/3/60 462 amps, microprocessor control, fully en- LINDE MDL. UCC-305 WELDING PWR. SOURCE, S/N 673425; HOBART closed; Air Cell System Mdl. AHCD1600 dual air dryer, 2-tank set, S/N 838- MEGA-MIG 300RVS WELDING PWR. SOURCE, S/N 81WS16193; AIRCO 003. (Location W) MDL. CV450 WELDING PWR. SOURCE, RH107168; RANSOME MDL. 60P SULLAIR 75 HP, 314 CFM, 115/125 PSIG, 230-460/3/60 electrics, air cooled, WELDING POSITIONER, S/N 2028122; (4) NATIONAL SUMP CLEANERS, S/N skid mtd., S/N 003-79574. (Location W) RIA31660, S/N RIA31661, S/N RIA31656, S/N RIA31659 ; PEDDINGHAUS MARKING MACHINE; SIGNO 05 HEAVY DUTY STENCIL MACHINE, S/N N.A.; GARDNER DENVER 75 HP ROTARY SCREW TYPE, Auto Sentry ES control (2) GLADER MDL. 3 NAIL MACHINES, S/N CMS129, S/N N.A.; IDL MDL. HS- system, integral air aftercooler, skid mounted. (Location H) 4350-15 BELT TYPE HEAD SANDER, S/N 186; DROOP & REIN MDL. FS60.1/80I VERTICAL MILLING MACHINE, S/N 679674; FLOW WATER JET REFRIGERATED AIR DRYER CUTTING SYSTEM, S/N N.A.; VERTICAL BELT SANDER, 2' x 132" belt, 5 HP ULTRA AIR, 120 deg. F. max. in, 200 PSIG max. inlet pres., 110 max./45 min. deg. motor, 230/460/3/60, S/N N.A. (All at Location W) F. ambient temp., R134A, 350 PSIG high and 150 PSIG low, 3/4 HP, elect. drain system w/timer, S/N U-23260.(Location W) FABRICATED TOWER, three levels, ex-aircraft maintenance platform, primer painted, 8' x 12' x 26' ht. (Location K) PORTABLE WELDER/GENERATOR/ (2) AIR TECHNICAL INDUSTRIES 48" X 48" SCISSOR LIFT TABLES, Mdl. SLT- AIR COMPRESSOR 64848-AW, 6,000 lb. lift cap., 8" lowered ht., 32" raised ht., (1) foot pedal needs CONSISTING OF: HOBART WELDING PWR. SOURCE w/NEMA Class 1 rating, replacing. (Location K) 350 amps, 100% duty cycle, Perkins diesel, 972 hours-on-meter, 120 volt aux- STORAGE CONTAINER, 8' x 8' x 20', double door one end, (2) vents on top, (2) illary pwr., single phase, 15 and 20 amps; 40 KVA 40. HYDROVANE MDL. 25 side vents, no floor. (Location K) AIR COMPRESSOR, mounted on trailer w/bottle racks, storage boxes, dual wheel, pintle hitch, new 1992, VIN 9723. (Location K) OFFICE FURNITURE & EQUIP. LISTA ROLLING LATERAL FILLING SYSTEM, space saver design, 3' x 8' max. MISCELLANEOUS MACHINES platform area; SOFT DRINK DISPENSER, (8) heads; KYOCERA MITA MDL. KM-C1530 COLOR COPIER; COMPUTER EQUIPMENT MOUNTING RACK. & SHOP SUPPORT EQUIP. (Location F & H) PORTABLE PLATE BEVELLER; ELECTROARC MDL. 2-DB0T ELECTRIC TAP DISINTEGRATOR, auto feed, vari feed rate, single phase, 18" x 26" tbl., S/N 6606; CUSTOM DUAL OPPOSED HEADS DRILLING MACHINE, w/(2) Drillunit heads; SANSTORM MDL. 48-BDP REACH-IN BEAD BLAST CABINET, 2-glove, Plexiglass window, 48" x 48" x 30" ht. cabinet; MACHINE/DRILL TABLE, 24" X 40" T-slotted, Delta Rockwell drill press; ASSORTED CHICK VISES; PARTS WASHER; MISC. TOOLHOLDER CARTS AND UTILITY CARTS; OIL TANK, au- tomatic dip type, pneu. feed; KRANZLE INDUSTRIAL PRESSURE WASHER, electric, stainless steel construction; UNIVERSAL ABRASIVE PARTS BLAST- ING SYSTEM, tumble type, twin blast guns; 10" DOUBLE END GRINDER, 3 PH/220 V; SUHNER “POWER MASTER” DRILLING HEADS, new 2008 and AVAILABLE42 2007, (4) Mdl. BEX16-ER25-0, (4) Mdl. BEX35K; FLOW MDL. 12X WATERNIFE HIGH PRESSURE WATER JET PUMP UNIT, no tbl. (Location F & H) PARTIAL VIEW OF UNUSED ROLLER DRAWER TOOL STORAGE CABINETS 12 13 < TAYLOR 36,000 LB. CAP. 1999 MDL. TE360L FORKLIFT

> TAYLOR 1995 25,000 LB. CAP. MDL. THD2505 FORKLIFT

FORKLIFTS TAYLOR 36,000 LB. CAP., Mdl. TE360L, new 1995, Cummins diesel engine, YALE 8,000 LB. CAP., Mdl. GDP080LCNUBV088DS, diesel, 2-stage mast, 122" pwr. shift trans., 36,000 lb. cap. @ 24" load center basic, 15' lift ht., 13'-6" max. lift ht., 72" forks, cushion tires, S/N 514299. (Location T) lowered ht., 100"W. carriage, 8'L. forks, 80% tires, cab w/heat, 3,172 hrs., S/N 23979. (Location C) TOYOTA 7,000 LB. CAP., Mdl. 7FGCU32, new 2006, 87" 3-stage mast, 187" lift ht., TAYLOR 25,000 LB. CAP., Mdl. THD2505, new 1999, Cummins diesel engine, cushion tires, LPG, extra valving for side shift, 42" forks, S/N 68917. (Location H) pwr. shift trans., 18' lift ht., 14'-6" lowered, 8'L. forks (new), swing shift, short TOYOTA 7,000 LB. CAP., Mdl. 7FGCU32, new 2006, 85" 2-stage mast, 132" lift ht., wheel base, fork positioners, 95% plus tires, 3,886 hrs., S/N 28556. (Location C) cushion tires, LPG, extra valving for side shift, 42" forks, S/N 68429. (Location H) HYSTER 15,500 LB. CAP., Mdl. S155XL, new 2004, 98" 2-stage mast, 133" lift ht., diesel, cushion tires, fork positioner, 48" forks, S/N C024V01829B. (Loca- YALE 6,000 LB. CAP., Mdl. GLC060RDJUAV083, LPG, gross wt. 9214 lbs., tion H) 630.4 hrs hours-on-meter, (Out of service) S/N N.A. (Location K) (2) HYSTER 12,000 LB. CAP., Mdl. S120XMS-PRS, new 2005, 83" 2-stage mast, 112" lift ht., cushion tires, LPG, side shift, 48" forks, S/N F004V04090C, (2) DALIAN 5,500 LB. CAP., Mdl. CPYD25, unused, Nissan LPG engine, hyd. S/N F004V03223C. (Location H) trans., 3-stage mast, 19.68" load center, 165.35" lift ht., 47"L. forks, wheel base: HYSTER 10,000 LB. CAP., 12' high mast, 4' forks, 6 cyl. gasoline engine, S/N 63"; pneu. tires, total wt,: 8,820 lbs.; side-shift; overhead crashbar, hyd. pwr. N.A. Motor #3923 (Out of service: engine turns over but does not run. Mast re- steering; tilt wheel; comfort seat; back-up light and alarm; headlights, S/N quires repairs.) S/N N.A. (Location K) Y8025006, S/N Y80250010. (Location W) (2) HYSTER 8,000 LB. CAP., Mdl S80XM, new 2003, 92" 3-stage mast, 195" lift ht., cushion tires, side shift, LPG, 42' forks, S/N E004A03767A, S/N HYSTER 5,000 LB. CAP., Mdl S50FT, new 2005, 83" 3-stage mast, 189" lift ht., E004A03793A. (Location H) cushion tires, LPG, side shift, 42" forks, S/N F187V01758C. (Location H)

2004 2003

(1 OF 2) HYSTER 8,000 LB. CAP. MDL. S80XM RAYMOND 4,500 LB. CAP. STAND-UP VERSION HYSTER 15,500 LB. CAP. DIESEL FORKLIFT FORKLIFT SIDE-LOADER

2006

UNUSED 2005

(1 OF 2) TOYOTA 7,000 LB. CAP. FORKLIFT (1 OF 2) DALIAN 5,500 LB. CAP. FORKLIFT HYSTER 5,000 LB. CAP. FORKLIFT

14 15 GEHL 6,000 LB. CAP. MDL. 663 TELESCOPING ROUGH TERRAIN FORKLIFT MASTERCRAFT 8,000 LB. CAP. MDL. TM80 ROUGH TERRAIN FORKLIFT SIDE LOADER FORKLIFTS RAYMOND 4,500 LB. (EST.) CAP. SIDE-LOADER, Mdl. 80-CSR70TT, electric, Lifecycle battery charger, S/N N.A. (Location T) RAYMOND 4,500 LB. (EST.) CAP. STAND-UP SIDE-LOADER, electric, Lifecycle battery charger, S/N N.A. (Location T) SWING MAST ELECTRIC FORKLIFTS (2) DREXEL SLT30 3,000 LB. CAP. @ 24", 360" max. lift height, 2-stage mast, 42" forks, 36 volt system, S/N 923876377, S/N 923876378. (Location T) ROUGH TERRAIN FORKLIFT MASTERCRAFT 8,000 LB. CAP. MDL. TM80, Perkins diesel engine, 122" low- ered ht., 168" raised ht., 48" forks, side-shifter, S/N T1038. (Location C) PARTIAL VIEW OF PEDESTAL JIB CRANES TELESCOPING ROUGH TERRAIN FORKLIFTS GEHL 6,000 LB. CAP. MDL. 663, John Deere diesel engine, 37.5' lift ht., leveling, DEKA WALK-BEHIND ELECTRIC, reach-in type, 42" forks, 42" btwn. strad- 4x4, 4-way steer, crab steer, 2,414 hrs., S/N JP034860. (Location C) dles, 72" 2-stage mast. (Location H) GEHL 5,000 LB. CAP. MDL. 553, John Deere diesel engine, 34' lift ht., leveling, PRESTO WALK BEHIND STRADDLE TYPE, 42" forks. (Location H) 4x4, leveling, 4-way steer, crab steer, 3,907 hrs., S/N JR094666. (Location C) MATERIAL HANDLING EQUIPMENT STAND-UP ELECTRIC FORKLIFTS ALUM-A-LIFT 100 LB. CAP. WALK-BEHIND ELECTRIC FORKLIFT; MISC. PRIME MOVER 4,500 LB. CAP. RIDE BEHIND TYPE, 4,500 lbs. @ 24" l.c @ 198" HOIST PARTS; ANVER VACUUM TYPE SHEET LIFTER. (All at Location F) l.h., 2-stage mast, 198" max. lift height, 45"W. aisle, 95" lowered height, : 41"L. forks; 36 v. battery, fork guard; overhead crashbar. (Location W) OVERHEAD BRIDGE CRANES RAYMOND 4,000 LB. CAP., Mdl. 31R40TT, 4,000 lbs. @ 24" l.c. @ 241" lift DEMAG 10 T. X 55' SPAN, 10 T. main hoist w/2-1/2 T. auxiliary, 55' span, height; 2-stage mast, 241" max. lift height, 108" lowered height: 108", 36"L. forks, double end drive, 39' lift height, box girder construction, main hoist S/N 36 v. battery, overhead crashbar. (Location W) 790839, aux. hoist S/N 68514, 2001. (Location C) (Bridge Located in Okla- homa City, OK. Call PMI (713) 691-4401 For Information to Inspect.) YALE 4,000 LB. CAP. RIDE BEHIND TYPE, 4,000 lbs. @ 24" l.c. @ 226" lift height; 2-stage mast, 250" lift ht., 106" lowered height, 36 v. battery; overhead crashbar, (2) KONECRANES 1/2 T. X 16.5' SPAN, underslung bridge, underslung horizontal fork extension travel. (Location W) hoist, power trolleys, (1) w/CXT 1/2 T. hoist, (1) no hoist. (Location H) WALK-BEHIND ELECTRIC PALLET LIFTS FREE STANDING JIB CRANES YALE 4,000 LB. CAP., 4,000 lbs @ 42" load length; 42" forks, 26-1/2" outside to APPROX. 10, up to 2 T. x 20' (est.) reach. (Location C) outside of forks: 12 v. battery. (Location W) YALE 6,000 LB. CAP., 42"L. x 20"W. forks, 12 v. batteries, 33" L-R x 64" F-B x 53" LOADING RAMP high. (Location W) STEEL LOADING RAMP, 30' long, 7' wide. (Location T)

EQUIPMENT LOCATION INDEX LOCATION C: LOCATION H: LOCATION T: Stone Machinery Movers Warehouse The Hammonds Companies, Inc. Hippo Hopper Division of Fabcor 3 Clarke Drive, Conroe, TX 77301 910 Rankin Road, Houston, TX 77073 27807 Red Fox Road, Tomball, TX 77377 LOCATION F: LOCATION K: LOCATION W: Fabcor, Inc. Katy Storage Warehouse Houston Storage Warehouse 6951 W Little York Road, 5003 East Third Street, 9010 W Little York Road, Houston, TX 77040 Katy, TX 77493 Houston, TX 77040 For Directions to These Locations, Go to Our Website Calendar Page for September 22 at www.pmi-auction.com

14 15 PUBLIC INVITED P.O. Box 19100 Houston, TX 77224-9100 AUCTION: THURS., SEPT. 22 • 10:00 A.M.

DATED MATERIAL – PLEASE DELIVER

Presorted First Class Mail U.S. Postage 6 HOUSTON AREA PAID ATTENTION: PLANT MANAGER Eugene, Oregon LOCATIONS TO BE SOLD OR EQUIPMENT BUYER Permit No. 17 IN ONE DAY Featuring: Large Quantity CNC & Manual Machine Tools & Fabricating Equip., Saws, Grinders, Presses, Q.C. Equip., Huge Quantity of Plant Support Equip., Material Handling Equip., Forklifts Up to 36,000 Lb. Cap., Much More AUCTION HOUSTON, TEXAS

DIRECTIONS TO HOTEL PLANT & MACHINERY INC. UNABLE TO ATTEND? BALLROOM AUCTION SITE APPRAISAL DIVISION Bid on-line in real time at FROM GEORGE BUSH INTERNATIONAL AIRPORT: Confidential Industrial Machinery & Equipment Appraisals TO PARTICIPATE YOU MUST: Take JFK Blvd./Airport Road south to Beltway 8. Turn Call 1-800-282-8466 1. Register at www.BidSpotter.com. DO IT NOW. right (west) on Beltway 8 and proceed to Interstate 2. Either wire transfer, or mail a cashier’s check deposit in the 45 North. The first exit traveling north on I-45 will be PROXY BIDS amount of $3,000 to: Exit #62 for Airtex Drive. Exit and turn left (east) If you cannot attend this sale or online we will bid on your Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 onto Airtex Drive. The Guesthouse International Hotel behalf. Contact Houston office at (713) 691-4401 for instruc- If you are using FedEx or another delivery service: auction site will be just ahead on your left. Watch for tions, or go to our website at www.pmi-auction.com. 2901 W. Sam Houston Pkwy. N., Suite A-130, auction signs. Houston, TX 77043, (713) 691-4401 You must be registered and have your deposit in the hands of Plant FINANCE YOUR AUCTION PURCHASE & Machinery, Inc. at least 24 hours prior to the start of the auction. LODGING/AUCTION LOCATION Conserve Your Cash & Increase Your Bidding Power Failure to register and/or failure to send your deposit to Plant & GuestHouse International Inn & Suites— AuctionLea$e Provides M&E Financing With Approvals Machinery, Inc. may disqualify you from bidding. DON’T WAIT. Soon to Be Holiday Inn Express...... (281) 876-7378 from $5,000 to $999,000 (800) 438-1470 If you need assistance, don’t hesitate to call (713) 691-4401. 125 Airtex Drive, Houston, TX 77090 Apply Online: www.AuctionLease.com ALL WEBCAST BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM.

PARTIAL TERMS & CONDITIONS A 12% Buyer’s Premium Will Apply On-site. AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE A 15% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation. PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO Everything will be sold to the highest bidder or bidders for cash in accordance with the FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises. CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & The buyer does hereby assume and does agree to indemnify and hold the auctioneer harm- MACHINERY INC. less from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site Here is an example of what your letter should be: Mr. “Customer Name” is a customer must provide PMI with evidence of insurance. The insurance coverage must be at a level of this bank. This bank will guarantee unqualified payment to PMI on the account listed acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the herein up to the amount of $______. This letter is good until October 21, 2011. order of the sale, accept bids from the seller, and group lots as it may deem appropriate. In default of payment of bills in full within the time therein specified, the Auctioneer in This auction may include consignment items. addition to all other remedies allowed by law, may retain all monies received as deposit or Although all information has been obtained from sources deemed reliable, the auctioneer otherwise, as liquidated damages. All items must be removed by the time announced at the and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the start of the sale. information herein contained, or contained in our catalog. It is for this reason that buyers Lots not paid for and/or removed within the time allowed may be resold at public or private should avail themselves of the opportunity to make inspection prior to the auction. sale without further notice, and any deficiency, together with all expenses and charge of Although it is not likely, auction sales are subject to cancellation or postponement. Kindly resale, will be charged to the defaulting purchaser. contact auctioneer prior to attendance. The buyer acknowledges that he or an agent has inspected all of the assets upon which he These terms and conditions may be modified or supplemented by language in the catalog will be bidding and/or does purchase. available at the sale site or by announcement at the start of the sale. Bidders should be Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL attentive to those announcements and to the catalog language.

QS-0010086 AUCTION DIRECTIONS TO EQUIPMENT LOCATIONS

Surplus to the Ongoing Operations of AUCTION: THURSDAY FABCOR, INC., THE HAMMONDS COMPANIES, INC., SEPTEMBER 22 HIPPO HOPPER DIV. OF FABCOR, & OTHERS 10:00 A.M. Theater-Style Digital Color Slide Auction INSPECTION: to Be Conducted at the Tues. & Wed., Sept. 20 & 21 From 9:00 A.M. to 4:00 P.M. GUESTHOUSE INTERNATIONAL/A.K.A. HOLIDAY INN & SUITES & Morning of Sale. Other Times by 125 AIRTEX DRIVE, HOUSTON, TEXAS 77090 Appointment Only.

LOCATION C: STONE MACHINERY MOVERS WAREHOUSE LOCATION K: KATY STORAGE WAREHOUSE 3 Clarke Drive, Conroe, TX 77301 5003 E Third Street, Katy, TX 77493 Directions From George Bush International Airport: Follow the signs out of Directions From George Bush International Airport: Follow the signs out of the air- the airport area to Beltway 8 (traveling south on JFK Boulevard). Turn right port area to Beltway 8 (traveling south on JFK Boulevard). Turn right (west) onto (west) on Beltway 8 and proceed to Interstate 45 North. Proceed approx. 25 Beltway 8 and enter the freeway. It will become the Sam Houston Toll Road as you miles north on I-45 to Conroe, TX area. On the north side of Conroe, take Exit proceed west. Travel counter-clockwise around Houston on the Sam Houston Toll Road #88 for TX-336 Loop/Navasota/Cleveland. Turn right (east) onto TX-336 and until you come to Interstate 10 on the west side of town. Exit onto I-10 West (towards proceed approx. one mile to the exit for First Street, just before the bridge. At San Antonio) and proceed approx. 13 miles to Exit #742 for Katy-Ft. Bend County Road. the next stop sign, turn right on Cartright Road and proceed a short distance Turn right (north) onto Katy-Ft. Bend County Road and proceed 2 blocks to E Third Ave. ahead to the Stone Machinery Movers facility ahead on your right. Proceed Turn left onto E Third Ave and immediately turn left into the warehouse parking lot. straight back through the gate to the buildings at the back of the property. Watch for auction signs. Watch for auction signs. LOCATION T: HIPPO HOPPER DIVISION OF FABCOR LOCATION F: FABCOR, INC. 27807 Red Fox Road, Tomball, TX 77377 6951 W Little York Road, Houston, TX 77040 Directions From the George Bush International Airport: Follow the signs out of the Directions From George Bush International Airport: Follow the signs out of airport area south on JFK Boulevard to Beltway 8. Turn right (west) onto Beltway 8 and the airport area to Beltway 8 (traveling south on JFK Boulevard). Turn right enter the freeway. It will become the Sam Houston Toll Road as you proceed west. (west) onto Beltway 8 and enter the freeway. It will become the Sam Houston Proceed to the exit for TX-249 North/Tomball Parkway North in the northwest corner of Toll Road as you proceed west. Travel counterclockwise around Houston on the the city. Take FM 249 outbound towards Tomball for approx.12-1/2 miles. As you enter Sam Houston Toll Road until you come to US Highway 290 on the west north- the Tomball area, turn left (west) at the 2nd traffic light onto Alice Road. (There is a west side of town. Exit onto Highway 290 East (toward downtown) and stay in Wells Fargo Bank on the corner.) Proceed approx. .6 mile on Alice Road to Red Fox the right hand lane. Take the very next exit off of Highway 290 for Fairbanks Road. Turn right (north) onto Red Fox Road and proceed to auction site on your left at North Houston Road. Turn left (north) onto Fairbanks North Houston Road. 27807 Red Fox Road. Watch for auction signs. Turn right (east) onto West Little York Road and proceed approx. 2 miles. The auction site, 6951 West Little York Road, will be on your right. Watch for LOCATION W: HOUSTON STORAGE WAREHOUSE auction signs. 9010 W Little York Road, Houston, TX 77040 LOCATION H: THE HAMMONDS COMPANIES, INC. Directions From the George Bush International Airport: Follow the signs out of the airport area to Beltway 8 (traveling south on JFK Boulevard). Turn right (west) onto 910 Rankin Road, Houston, TX 77073 Beltway 8 and enter the freeway. It will become the Sam Houston Toll Road as you Directions From George Bush International Airport: Follow the signs out of proceed west. Travel counter-clockwise around Houston on the Sam Houston Toll Road the airport area to Beltway 8 (traveling south on JFK Boulevard). Turn right until you come to US Highway 290 on the west northwest side of town. Exit onto (west) on Beltway 8 and proceed to Interstate 45 North. The first exit traveling Highway 290 East (toward downtown) and stay in the right-hand lane. Take the very north on I-45 will be Exit #62 for Airtex Drive. Exit and take the U-turn at Airtex next exit off of Highway 290 for Fairbanks North Houston Road. Turn left (north) onto Drive so that you will then be heading back south on the I-45 frontage road. Fairbanks North Houston Road. Turn left (west) onto West Little York Road and Proceed approx. one mile south to the next intersection at Rankin Road. Turn proceed approx. 1/4 mile. Turn right into the Victory Packaging Plant parking lot at left (east) onto Rankin Road and proceed approx. 1.5 miles to 910 Rankin Road 9010 W Little York Road and proceed all the way back to Bay #17 at the very end of the on your right. Watch for auction signs. building. Watch for auction signs.

BUYER’S PREMIUM: 12% ONSITE On-Site Bidding in Houston, TX or Bid Via Webcast at 15% VIA WEBCAST

Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 Bob Braman TX Lic. #6362 • Ron Moore TX Lic. #7314 E-MAIL: [email protected] HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com