Instruction Manual Model No: Fb8280c
Total Page:16
File Type:pdf, Size:1020Kb
CLASSIC GAME CONSOLE INSTRUCTION MANUAL MODEL NO: FB8280C AtGames Holdings, Ltd. www.atgames.net Classic Game Console Appearance and Key List The image below shows the location of the connectors and buttons. Each function is outlined below (the illustration is for reference only). 3 2 1 8 5 7 4 6 1 Power ON/OFF Turn the game console’s power ON/OFF. AC Adapter Specification INPUT: 100V-240V 2 MENU AC/50HZ-60HZ Press this button to restart the console. OUTPUT: DC 9V/500mA PLUG: 3 Cartridge Slot Slot for additional cartridges. 4 First Player Game Controller Jack Game controller connected to this jack controls games in 1-player games and controls the first player in 2-player games. Note that some two player games NOTE alternate use of the first player controller. • Must use the AC adapter included as power supply to 5 Second Player Game Controller Jack the console. Game controller connected to this jack controls • Do not connect the AC adapter the second player in 2-player games. to the power input other than the above specifications. 6 Video Output • AC adapter is not a toy. Video output. • The socket-outlet shall be installed near the equipment 7 Audio Output and shall be easily accessible. Audio output. 8 AC Adaptor Jack (DC 9V) The power adaptor plugs into this port, then into your AC outlet. 1 Wired Game Controllers Appearance and Key List Input Instruction If your TV does not have a dedicated composite input, it may support such a The image below shows the appearance and key list of the wired game connection through a shared component input. For TVs with shared compo nent controllers (the illustration is for reference only). inputs, the diagram below indicates a typical setup, with the yellow composite video connector plugging into the green component video input. Refer to your TV's manual for additional information on available ports and how to change 1 8 inputs once connected. 7 6 5 4 2 3 1 START Press the button to start the game and press it again to pause the game. 2 Directional Pad (D-Pad) Directional Pad for game playing. 3 A Key 6 X Key Games key A. Games key X. 4 B Key 7 Y Key Games key B. Games key Y. 5 C Key 8 Z Key What can I do if my TV can only support HDMI input? Games key C. Games key Z. Check out AtGames Flashback Zone for products that support HDMI http://atgames.us/. How to connect the console to a TV? What are the two controller ports on the console for? These ports are for the wired controllers. These ports are also compatible with 1. Connect the game console to TV using the enclosed AV cable. original Sega Genesis and compatible wired controllers. 2. Press the power button on the game console after configuring the TV ON/OFF input to AV or Composite input. NOTE How to connect wired controllers? Display results will vary by TV. Consult your TV's manual to adjust Brightness, Sharpness, Contrast, Aspect Ratio, and other features for best display results. For 1 player games: Connect a wired controller to the left controller port. Do not unplug AV cable when console is on. Otherwise, please press MENU button to For 2 player games: Connect a second wired controller to the right controller restart the console. port for player two. 2 3 How do I start playing? Safety Notice 1. Press the button to turn on the game console. 2. Use the player 1 (P1) wired controller that is connected to the left controller port to browse menu. Warning 3. Press the button on the controller to select and begin the game. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. How do I play two-player games? NOTE 1. Follow the steps in section “How do I start playing”. This equipment has been tested and found to comply with the limits for a Class 2. Press or on to select a two player game. B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 3. Press the button of the P1 controller to start playing the game. installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may How do I play a cartridge game? cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this 1. Make sure you turn off the console. equipment does cause harmful interference to radio or television reception, 2. Insert the cartridge into slot on the console. which can be determined by turning the equipment off and on, the user is 3. Press the button to turn on the console. It will automatically start the encouraged to try to correct the interference by one or more of the following cartridge game. measures: NOTE: Console may not be compatible with all Genesis/Mega Drive cartridges. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. How do I go back to game menu while playing the game? • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. MENU Press the button on the console and the screen will go back to the game • Consult the dealer or an experienced radio/TV technician for help. menu page. With certain TV models, e.g., Vizio VOJ320F1A, SONY KDL-32BX310, SONY KDL-32EX308, SONY KDL-46HX729, SONY KDL-50R550A, LG 47LA6900, LG 55UB8500, Samsung What do I do when the controller is not working? UN40C7000WF and Panasonic TC-58AX800U0, this console may be incompatible and 1. If you only have a controller plugged into the P2 socket, turn off your cause undesired effects, like display shifting, which results in the picture not being centered console and connect the controller to the P1 (left) controller port. Then, turn on the screen. Or horizontal display noise, it might move up and down on the screen. If this on the console and try again. happens, try the console on a different display or return the console to the point of purchase. 2. If you have a controller plugged into the P1 socket, press MENU button to reload the console and try it again. Repair and Exchange Service If the unit is damaged due to its improper use or simply wear and tear, and if What do I when the power supply is not working? the place where the product was originally purchased can't do an exchange of You might be using the wrong AC adapter. Please use the one included in the this product, a standard repair and exchange program may help. Please visit package, which is rated for 9V/500mA. http://www.atgames.us/Repair_c2.htm for more details about the repair and exchange program. 4 5 FR Présentation des manettes et liste des commandes Présentation des manettes et liste des commandes L’image et la légende ci-dessous indiquent l’emplacement et la fonction de chaque bouton de la manette (illustration présentée pour référence uniquement). L’image et la légende ci-dessous indiquent l’emplacement et la fonction 1 de chaque bouton de la manette (illustration présentée pour référence 8 uniquement). 7 3 6 2 5 1 4 8 2 3 5 7 1 START 4 6 Appuyez sur ce bouton pour lancer le jeu et appuyez à nouveau pour le mettre en pause. 1 Bouton d’alimentation ON/OFF Caractéristiques de l'adaptateur AC Allumer ou éteindre la console de jeu. 2 Pavé directionnel (Pavé D) ENTRÉE: 100V-240V Pavé directionnel de commande. 2 MENU AC/50HZ-60HZ 3 6 Appuyer sur ce bouton pour redémarrer la SORTIE: DC 9V/500mA Touche A Touche X Touche de commande A. Touche de commande X. console. PRISE: 4 Touche B 7 Touche Y 3 Fente pour cartouche Touche de commande B. Touche de commande Y. Fente pour cartouches supplémentaires. 5 Touche C 8 Touche Z 4 Port pour la manettte du 1er joueur Touche de commande C. Touche de commande Z. La manette connectée à ce port contrôle l'interface principale dans les jeux solo et le 1er joueur dansles jeux à 2 joueurs. A noter, NOTE certains jeux en mode 2 joueurs utilisent • Utilisez exclusivement alternativement le joueur de gauche. l’adaptateur secteur fourni Comment connecter la console au téléviseur? pour alimenter la console. 5 Port pour manette du second joueur • Ne branchez pas l’adaptateur 1. Connectez la console au téléviseur à l'aide du câble AV. La manette connectée à ce port contrôle le secteur à une source 2. Configurez la TV pour qu’elle soit en mode A/V, ensuite appuyez sur second joueur dans les jeux à 2 joueurs.. d’alimentation non conforme ON/OFF aux spécifications ci-dessus. le bouton “ON/OFF” de la console. 6 Sortie vidéo 7 Sortie audio • L’adaptateur secteur n’est pas NOTE Sortie vidéo. Sortie audio. un jouet. Le rendu écran dépend du téléviseur. Consulter la notice du téléviseur pour ajuster la • Installez vos appareil près de luminosité, la netteté, le contraste, le rapport d'aspect, et autres caractéristiques pour vos installations électriques. 8 AC Adaptateur Jack (DC 9V) optimiser les résultats d'affichage. L'adaptateur d'alimentation se branche Ne pas débrancher le câble AV quand la console est en marche.