NTC Thermistor (Temperature Sensor) Catalogue
Total Page:16
File Type:pdf, Size:1020Kb
Temperature Sensor Refrigeration1 & Freezing Applications Your Best Choice 2 3 4 6 THINKING 5 SENSOR 8 9 7 10 11 14 12 13 Refrigeration & Freezing Applications Refrigeration & Freezing 15 16 Feature 17 ◆THINKING temperature sensor 18 is customizable in accordance with detected environment and operation temperature range. ◆THINKING 滾滾長江東逝水temperature sensor operates under extremely humid and low-temperature 19 environment and meets customer’s requirement of response time. ◆Various electrical characteristics are available for your choice. Function ◆Temperature detection of refrigerator and freezer: Sensor is installed in refrigerator compartment, freezer compartment, and multi zone compartment. ◆Temperature detection of ambient environment and heaing pipe. ◆Temperature detection of power supply and transformer. HEADQUARTER 12F, No.93, Dashun 1st Rd., Zuoying Dist., Kaohsiung, Taiwan 81357 / Tel: 886-7-5577660 Refrigerator, freezer, commercial ice TAIPEI, TAIWAN 3F, No.25, Lane 70, Wugong 2nd Rd., Xinzhuang Dist., New Taipei City, Taiwan 24888 / Tel: 886-2-22990652 Application maker, etc. JIANGSU, CHINA No.6, Longmen Rd., Wujin High & New-Tech Industrial Development Zone, Changzhou, Jiangsu, China 213161 / Tel: 86-519-86578999 GUANGDONG, CHINA No.45, East Rd., Sha-Tao Dist., Chang-An Town, Dongguan City, Guangdong, China 523863 / Tel: 86-769-85542016 BEIJING, CHINA Room 2707, Building 1, No. 88, Jian Guo Road, Chaoyang Dist., Beijing City, China 100025 / Tel: 86-010-85898940 QINGDAO, CHINA No.696, Hefei Rd., Shibei Dist., Qingdao City, China 266035 / Tel: 86-138-08993369/86-186-69738999 Thinking Electronic Industrial Co., Ltd. HUBEI, CHINA California Sunshine Community, Guanggu Rd. Donghu New Technical Development Zone, Wuhan City, Hubei, China / Tel: 86-189-95621889 THINKING SENSOR Feature: Screw-on design is for easy installation and installed on metallic surface Screw-On for temperature detection. Type Application: The sensor generally detects temperature of transformer, power supply, etc. 0.8±0.2 5.1±0.5 Component|Sensing top (terminal+plastic cap+NTC chip)+tube +lead wire+terminal+housing | ℃ 8.30±1 Moisture Resistance 40 95% RH X 1000 hours Φ4.25±0.2 Operation Temperature|-30~+105℃ 1 ± 7 Insulation Test|DC 500V 100MΩ (Min) MAX 5.0 ± 8.6 1 185±10 R Value|R25℃=100KΩ±3% B Value|B25/50=3900K±2% 19.9±1 Thermal Time Constant|Around 15 seconds (heating board) 1 200±10 Hi-Pot Test|AC 1500V 10mA (Max) | 5.8±0.5 0.5 Sensing top (terminal+plastic cap+NTC chip)+lead wire 0.1 Component ± ± 3 0.5 +terminal+housing Moisture Resistance|40℃ 95% RH X 1000 hours Φ3.6±0.2 Operation Temperature|-20~+105℃ 6.4±0.5 | 0.5 Insulation Test DC 500V 100MΩ (Min) ± | ℃ | 7.7 R Value R100 =3.3KΩ±2.5% B Value B25/50=4050K±5% | 2 13.2±1 130±5 Thermal Time Constant Around 25 seconds (heating board) Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top (terminal+NTC chip+epoxy)+lead wire Max 6.5 Moisture Resistance|40℃ 95% RH X 1000 hours 6±1 Operation Temperature|-20~+125℃ 0.1 45±3 ± Max 10 | 0.5 Insulation Test DC 500V 100MΩ (Min) | ℃ | 0.5 R Value R25 =10KΩ±2% B Value B25/100=3988K±1% ± 3 7.5 Thermal Time Constant|Around 15 seconds (heating board) ) Φ3.6±0.2 Hi-Pot Test|AC 1500V 10mA (Max) Epoxy Feature: Structure of the sensor is simple, and it is water resistant and responds Coating fast. Type Application: The sensor generally detects ambient temperature. Component|Sensing top (NTC chip+epoxy)+lead wire Moisture Resistance|40℃ 95% RH X 1000 hours 1.0 ± |-20~+105℃ 7.0 Operation Temperature 5±2 Insulation Test|DC 500V 100MΩ (Min) 12.0~20.0 40±5 500±10 R Value|R25℃=10KΩ±1% B Value|B25/85=3975K ± 1% Thermal Time Constant|Around 5 seconds (in water) 4 Hi-Pot Test|AC 1000V 10mA (Max) Component|Sensing top (NTC chip+epoxy)+lead wire+tube+terminal +housing |40℃ 95% RH X 1000 hours Max 5 Moisture Resistance 5 Max19 | ℃ 100±5 Operation Temperature -20~+105 300±20 Insulation Test|DC 500V 100MΩ(Min) 550±20 R Value|R25℃=10KΩ±3% B Value|B25/50=3700K±3% 5 Thermal Time Constant|Around 5 seconds (in water) Hi-Pot Test|AC 1000V 10mA(Max) Feature: Material of metal case is the same as that of detected object for more accurate temperature detection and faster response. Furthermore, stainless steel Metal Case material increases product stability and can directly conact water and ice. Type Application: Temperature detection of freezer compartment of refrigerator, low temperature coil of freezer, heating pipe. Component|Sensing top (NTC chip+copper cap)+lead wire Moisture Resistance|40℃ 95% RH X 1000 hours 0.3 ± | ℃ 6 Operation Temperature -20~+105 Φ | 25±1 5±2 Insulation Test DC 500V 100MΩ (Min) R Value|R25℃=10KΩ±1% B Value|B25/85=3975K±1% 40±5 | 6 3000±30 Thermal Time Constant Around 15 seconds (in water) Hi-Pot Test|AC 1500V 10mA(Max) 30°± | 5° Component Sensing top (NTC chip+brass cap+clip)+lead wire | ℃ 1.80 Moisture Resistance 40 95% RH X 1000 hours Operation Temperature|-40~+105℃ |DC 500V 100MΩ (Min) R Insulation Test 3.90± 0. 2 55°±5° R Value|R25℃=2.7 KΩ± 3% B Value|B25/85=3975K±2% | Φ5.71±0.25 Thermal Time Constant Around 10 seconds (in water) 0.2 ± 6 |AC 1500V 10mA(Max) 7 Φ Hi-Pot Test 4 0 . 5.75± 0. 5 0 ± ± 3±1 0 12.7 0.25 6±0.5 5 . 13. 51±0. 5 30±5 0 24±1 1100±25 Thinking Electronic Industrial Co., Ltd. Component|Sensing top (NTC chip+copper cap)+tube+lead wire | ℃ 0.1 Moisture Resistance 40 95% RH X 1000 hours ± 6 Φ | ℃ 5 3±0.5 Operation Temperature -30~+105 30±0.5 25±5 500±10 Insulation Test|DC 500V 100MΩ (Min) 580±10 R Value|R25℃=2.707KΩ± 3% B Value|B25/85=3965 K±2% Thermal Time Constant|Around 15 seconds (in water) 8 Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top (NTC chip+stainless steel cap)+cable wire +terminal+housing 0.1 | ℃ ± Moisture Resistance 40 95% RH X 1000 hours 6.0 | ℃ Φ Operation Temperature -40~+105 130±5 101.6±5 Insulation Test|DC 500V 100MΩ (Min) R Value|R25℃= 5KΩ± 1% B Value|B25/85=3975±1% 9 Thermal Time Constant|Around 20 seconds (in water) Hi-Pot Test|AC 1500V 10mA(Max) Feature: Plastic case type sensing top is filled with insulation glue, and which Plastic , Case offers better water and corrosion resistances. Type Application: Temperature detection of refrigerator and freezer Component|Sensing top (NTC chip+plastic cap)+lead wire Moisture Resistance|40℃ 95% RH X 1000 hours 0.2 ± 5 |-40~+105℃ Φ Operation Temperature 4±1 Insulation Test|DC 500V 100MΩ (Min) 24±1 970±20 50±5 R Value|R-20℃=19.09KΩ±3% B Value|B0/50=3850K±1% 10 Thermal Time Constant|Around 15 seconds (in water) Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top (NTC chip+plastic cap)+lead wire+terminal +housing 0.2 ± | ℃ 7 Moisture Resistance 40 95% RH X 1000 hours Φ Operation Temperature|-40~+105℃ 25±1 560±10 50±5 Insulation Test|DC 500V 100MΩ (Min) R Value|R25℃=10KΩ±5% B Value|B25/50=3935K±1% 11 Thermal Time Constant|Around 20 seconds (in water) Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top (NTC chip+plastic cap)+cable wire R3 Moisture Resistance|40℃ 95% RH X 1000 hours 0.5 ± | ℃ 6.0 6±1 Operation Temperature -10~+80 Φ 65±5 30±0.5 Insulation Test|DC 500V 100MΩ (Min) 4500±50 R Value|R25℃=10KΩ±5% B Value|B25/85= 3975K±3% 12 Thermal Time Constant|Around 20 seconds (in water) Hi-Pot Test|AC 1500V 10mA(Max) Component|Sensing top (NTC chip+plastic cap)+cable wire Moisture Resistance|40℃ 95% RH X 1000 hours 0.5 ± 8 |-40~+80℃ Φ 5±1 Operation Temperature 30±1 40±10 Insulation Test|DC 500V 100MΩ (Min) L R Value|R0℃=16.33KΩ±2% B Value|B25/100=3980K±1.5% 13 Thermal Time Constant|Around 20 seconds (in water) Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top (NTC chip+plastic cap)+cable wire 3 ± +terminal+housing 3 ± R10.5 51.5 Moisture Resistance|40℃ 95% RH X 1000 hours 90 Operation Temperature|-40~+105℃ |DC 500V 100MΩ (Min) 141±26 126±3 Insulation Test R Value|R25℃=2.7 KΩ±3% B Value|B25/50=3900K±1.5% 14 Thermal Time Constant|Around 30 seconds (in water) Hi-Pot Test|AC 1500V 10mA (Max) 9.7±0.3 | 7.0±0.3 Component Sensing top (NTC chip+plastic cap+stainless steel clip) 10±0.3 +lead wire 0.3 ± Moisture Resistance|40℃ 95% RH X 1000 hours 0.5 0.3 9.0 ± ± Operation Temperature|-40~+105℃ 18.2 10.7 4±1 |DC 500V 100MΩ(Min) R3.97 ± 418+10/-0 Insulation Test 25 0.5 R Value|R25℃=2.7 KΩ±1% B Value|B25/50= 3900K±1.5% |Around 20 seconds (in water) 15 4.5±0.8 Thermal Time Constant Hi-Pot Test|AC 1500V 10mA (Max) Component|Sensing top(NTC chip+plastic cap)+lead wire 10±0.2 Φ12.8±0.2 1.0±0.1 Moisture Resistance|40℃ 95% RH X 1000 hours 0.2 ± Operation Temperature|-40~+105℃ 0.1 ± ± 10.45 0.1 5 1 ± | 43.5±0.5 50±5 Insulation Test DC 500V 100MΩ (Min) 7.0 ± 4.0 8.22 0.10 1760±20 R Value|R25℃=2.342KΩ±1.5% B Value|B25/100=3980K±1.5% Thermal Time Constant|Around 35 seconds (in water) 16 Hi-Pot Test|AC 3750V 10mA (Max) 1.