PRODUCT MANUAL & SPECIFICATIONS MODEL: ASTR-PSVR-STAND-V1
ILLUMINATED DISPLAY & CHARGING DOCK Compatible with the PlayStation® VR System*
*PSVR & accessories not included STAND ASSEMBLY INSTRUCTIONS CHARGING DOCK COMPONENTS
A
B
C
Step 1: Insert A into the top socket of B . NOTE: This is a locking permanent attachment.
Step 2: Slide B into the groove on C until it fully locks into place. To detach B from C press the silver square as you slide B out. Step 3: Remove D (quick dock adapters) and slide into micro USB port of DualShock® 4.* * PLEASE NOTE: Keep the quick dock adapters in the adapter bays (shown in step 3) when not in use to avoid misplacing them. May be packaged in same bag as manual.
STEP: 1 STEP: 2 A
A
B
B
C PLEASE NOTE: CANNOT BE REMOVED ONCE ATTACHED, ATTEMPTS TO DISCONNECT WILL DAMAGE THE UNIT.
STEP: 3
D
D
PLEASE NOTE: QUICK DOCK ADAPTERS MAY ALSO HAVE BEEN PACKAGED IN BAG WITH MANUAL FOR SECURE SHIPPING. OPERATING INSTRUCTIONS & GUIDELINES CHARGING BASE DIAGRAM
Playstation® 3 Move controller dock
Playstation® 3 Move charge indicator
DualShock® 4 charge indicator DualShock® 4 controller dock Quick dock adapter bay
Touch sensitive LED power button
1. Plug the supplied AC adapter into the input located on the rear of the dock.* * PLEASE NOTE: Only use the supplied AC adapter or you may damage your controllers. 2. To activate or deactivate the stand illumination simply touch the LED power button. 3. While charging a controller the corresponding charge indicator will turn RED as the device is charging and BLUE once it is fully charged.* * PLEASE NOTE: If a controller is not docked correctly or contact is limited the corresponding charge indicator may flash repeatedly. To clear this, simply remove the controller, unplug then replug the AC adapter, and dock the controller. Rear USB port does note have a charge indicator.
4. When not in use you can wrap your PSVR Headset cable around the winding grove.
PRODUCT FEATURES INCLUDED INSIDE THIS BOX RRStable & secure mount for PSVR Headset 1. Illuminated charging dock (3 components) RRCable winding groove for tidy appearance • Charging base RRRear facing platform to rest headphones • PSVR mount • Headphone dock (locks in permanently) RRQuick docking DualShock® 4 micro ® USB adapters 2. 4 Quick dock DualShock 4 micro adapters RRCapacitive LED power button for quick 3. DC 5V, 3A adapter and easy access 4. Instruction manual CHARGING CAPABILITIES • (2) PlayStation® 3 Move controllers (~3-4hrs) • (2) DualShock® 4 controllers (~2.5hrs) • (1) Rear USB Device (varies)
TECHNICAL SPECIFICATIONS • Charge Temp: <40˚C • Power Supply: DC 5V, 3A • Power Output (5V): • DualShock® 4 Dock - 750mA (x2) • Move 3 Dock - 550mA (x2) • Rear USB - 480mA
IMPORTANT SAFETY INSTRUCTIONS (Please read carefully before use) 1. CAUTION: To prevent electrical shock, do not dismantle or remove any external screws. There are no user serviceable parts inside. For assistance please visit: AsterionProducts.com. 2. VR/ARC™ is intended to only hold a PSVR headset and audio headphones. Unintended use can result in damaging the unit. 3. Keep well ventilated and do not cover any portion of the device while charging. 4. Do not place near heat sources such as radiators and heaters, and do not use in high temperature environments. 5. Keep this product dry and avoid any contact with damp or wet areas.
WARNING
CHOKING HAZARD - Small Parts. Not for children under 3 years. Use with adult supervision only.
PlayStation 4™ and PlayStation VR™ are registered trademark or trademarks of Sony Computer Entertainment Inc. All Rights reserved; All other trademarks are property of their respective owners. Photos and illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. This product is not distributed under official license from or approved, sponsored or endorsed by Sony Computer Entertainment Inc. This product is not manufactured for Sony Computer Entertainment Inc. The Asterion Logo and VR/ARC Logo are trademarks of LYRO, LLC.