Lt-26Dx7bsp Lt-26Dx7ssp Lt-32Dx7bsp Lt-32Dx7ssp Televisor Con Panel Lcd Panorámico Manual De Instrucciones Wide Lcd Panel Tv Instructions

CASTELLANO ENGLISH

LT-26DX7BSP LT-26DX7SSP LT-32DX7BSP LT-32DX7SSP TELEVISOR CON PANEL LCD PANORÁMICO MANUAL DE INSTRUCCIONES WIDE LCD PANEL TV INSTRUCTIONS

LT-26DX7BSP

LLCT2151-001A-U_Cover.inddCT2151-001A-U_Cover.indd 1-21-2 66/29/2006/29/2006 1:54:301:54:30 PMPM Apreciado cliente, CASTELLANO Información para los usuarios sobre la eliminación de CASTELLANO equipos usados Este aparato cumple con las normativas y normas europeas respecto a la seguridad [Unión Europea] eléctrica y a la compatibilidad electromagnética. Este símbolo indica que los aparatos eléctricos y electrónicos no deben desecharse junto El representante europeo de Victor Company of Japan, Limited es: con la basura doméstica al ﬁ nal de su vida útil. El producto deberá llevarse al punto de JVC Manufacturing U.K. Limited recogida correspondiente para el reciclaje y el tratamiento adecuado de equipos eléctricos y 2 Glenburn Road, College Milton Industrial Estate, East Kilbride G74 5BA electrónicos de conformidad con la legislación nacional. Reino Unido Si desecha el producto correctamente, estará contribuyendo a conservar los recursos naturales y a prevenir los posibles efectos negativos en el medio ambiente y en la salud de las personas que podría causar el tratamiento inadecuado del producto desechado. Para obtener más información sobre el punto de recogida y el reciclaje de este producto, póngase en contacto con su oﬁ cina municipal, su servicio de recogida de basura doméstica Dear Customer, ENGLISH o la tienda en la que haya adquirido el producto.

This apparatus is in conformance with the valid European directives and standards De acuerdo con la legislación nacional, podrían aplicarse multas por la eliminación incorrecta de estos desechos. regarding electromagnetic compatibility and electrical safety. Atención: Este símbolo sólo es (Empresas) European representative of Victor Company of Japan, Limited is: válido en la Unión Si desea desechar este producto, visite nuestra página Web www.jvc-europe.com para JVC Manufacturing U.K. Limited Europea. obtener información acerca de la retirada del producto. 2 Glenburn Road, College Milton Industrial Estate, East Kilbride G74 5BA [Otros países no pertenecientes a la Unión Europea] United Kingdom Si desea desechar este producto, hágalo de conformidad con la legislación nacional vigente u otras normativas de su país para el tratamiento de equipos eléctricos y electrónicos usados.

Information for Users on Disposal of Old Equipment ENGLISH

[European Union]

This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.

By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal ofﬁ ce, your household waste disposal service or the shop where you purchased the product.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Attention: (Business users) This symbol is only If you wish to dispose of this product, please visit our web page www.jvc-europe.com to valid in the European obtain information about the take-back of the product. Union. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.

I II

WWEEE_forES.inddEEE_forES.indd I-III-II 66/29/2006/29/2006 1:52:271:52:27 PMPM Expanding the world of beautiful images

Digital terrestrial broadcasting (DVB-T) ENGLISH Digital channels Analogue terrestrial broadcasting (VHF / UHF) and analogue cable TV Enjoy rich multi-media with JVC Analogue channels Contents DVB-T / VHF / UHF broadcasting IMPORTANT! First things ﬁrst! Digital camera  Warning ············································ 3

Video camera

Game console Getting started PREPARE  Names of all the parts ······················ 5 Personal  Basic connections ···························· 7 VCR DVD player computer  Connecting external devices ············ 9 Audio components  Initial settings ································· 11 DVD recorder Let’s try it out  Enjoying your new TV! ··················· 15  Watching digital channels ·············· 17  Using EPG ···································· 19  Viewing teletext ······························ 21 USE  Watching analogue channels ········· 23  Watching videos / DVDs ················ 25  Using timer-record ·························· 27  Useful functions ······························ 29 · Subtitle / Audio selection / Sleep timer / Zoom / Multi-picture, etc.  Operate JVC recorders and other devices ··· 33 Just the way you like it  Customising your TV ······················ 35  Using DTV menu ···························· 37 SETTINGS  Advanced picture adjustment ········· 39 · Reduce noise / Watch a more natural picture · Set the aspect ratio, etc.  DTV conﬁguration ·························· 41  DTV setup ······································ 43  DTV installation ······························ 45  Editing digital channels ·················· 47  Editing analogue channels ············· 49 TROUBLE? When you have trouble  Troubleshooting ····························· 51  “CH/CC” List ··································· 55  Technical information ····················· 56  Speciﬁcations ································· 58 1 2

1-2 6/29/2006 1:12:33 PM First things ﬁrst! Warning Please follow all the guidelines below

Follow this manual Do not allow the TV On disposal of the Never place anything on ENGLISH regarding setup! to fall! TV! the TV!  Connect only to a 220-240V, 50/60Hz  Do not rest your elbows on, or allow  Follow the instruction in  Placing liquids, naked AC outlet. children to hang from the TV. “Information for Users on flames, cloths, paper, There is a risk that the TV will fall and Disposal of Old Equipment” etc. on the TV may cause injuries. (P.II ). cause a fire. IMPORTANT! Make enough room for Never expose to rain or inserting and removing moisture! the power plug!  To prevent fire or electric Never try to repair shock, never allow liquids to enter the unit. the TV yourself! If the TV is damaged PREPARE Place the TV as  If the problem cannot be solved in or behaving strangely, close to the outlet as “Troubleshooting” (P. 51), unplug stop using it at once! Never insert objects into possible! the power cord and contact your  Unplug the power cord and contact retailer. your retailer. the cabinet openings!  The main power supply for this TV is  It may cause a fatal controlled by inserting or removing the electric shock. Take care power plug. when children are near. Never cut or damage the power cord! USE  If the AC plug is not the Never listen to right shape, or the power cord is not long enough, headphones at high use an appropriate plug adapter or extension cable. volume! (Consult your retailer.)  It may damage your hearing. SETTINGS

Unplug the power cord When attaching the TV to Never dismantle the Hold the TV so as not to when going out! the wall, use the optional rear panel! scratch the screen!  It may cause an electric shock.  Do not touch the screen when carrying the  JVC wall mounting unit! The power buttons TV. on the remote control  Never obstruct the and the TV unit cannot Consult a qualiﬁed technician.  See the included manual on mounting ventilation holes! Do not carry the

completely turn off the TROUBLE? TV. (Make appropriate procedures.  It may cause overheating or a ﬁre.  TV on your own! arrangements for JVC assumes no responsibility for bedridden people.) damage due to improper mounting. Handle LCD panel  In order to prevent accidents, with care! ensure that the TV is carried by two or more people.  Use a soft, dry cloth when cleaning.  For more details on installation, usage and safety Consult your retailer 3 4

3-4 6/29/2006 1:12:36 PM Getting started Names of all the parts

Mute Power On / Off ENGLISH

TV/AV Switch between TV / AV devices MENU/OK Display on-screen Change channel / page menu / set P Change channel

Channel information Watch video, etc. (P. 25) IMPORTANT! Volume (P. 17) Colour buttons Switch between Illumination lamp Remote control sensor “TV / VCR / DVR / DVD / HC” (P. 33) Power On / Off Switch digital /  Illumination lamp lights Power lamp analogue channels Display on-screen menu (P. 35) while the TV is on. ON: Lit (Green)  Volume “Illumination” (P. 36) OFF: Unlit Select and REC: Lit  (P. 27) To headphones (P. 9) PREPARE  Power lamp lights while View teletext (P. 21) conﬁrm settings in menus the TV is on.  “Power Lamp” (P. 36) Change channel / page To previous channel Remove the terminal cover  When watching TV / Video  LT-32DX7BSP/SSP LT-26DX7BSP/SSP When watching digital channels Change the aspect ratio (P. 30) Turn on “3D Cinema Sound” (P. 30) USE

View the electronic programme guide (EPG) (P. 19) Switch TV / RADIO (P. 17) Take a snapshot Press to Press to of the screen (P. 32) remove. remove. View in multi-picture mode (P. 31)

 If the cover cannot be closed due to the cables being in the way  Do not force the cover to close (leave it open). View subtitles (P. 29)   Check accessories Connecting terminals on the back of the TV Connecting External devices (P. 9) Audio select (P. 29)  To remove the cable cover, refer to the included sheet.  When viewing teletext (P. 21) SETTINGS Remote control AAA/R03 Batteries (RM-C1906S) For conﬁrming Direction of TV Tidying the cables the TV works

 LT-26DX7BSP/SSP To attach the stand, refer to the included sheet. Insert the batteries

Use two “AAA/R03” dry cell batteries. Insert the batteries from the TROUBLE?  When choosing a favourite - end, making sure the + and - polarities are correct. channel (Analogue channels) (P. 23)  When operating a JVC VCR or DVD (P. 33)

5 6

5-6 6/29/2006 1:12:49 PM Basic connections Please read the user manuals of each device carefully before setup.

It is necessary to connect an aerial to watch TV. ENGLISH  Connect with other devices  “Connecting external devices” (P. 9)

Connect the aerial Connect a VCR / DVD recorder

AERIAL

AERIAL IMPORTANT!

EXT-2 PREPARE EXT-1 USE

VCR / DVD recorder

 After all the connections have been made, insert the plug into an AC outlet.  After all the connections have been made, insert the plug into an AC outlet.  When using an aerial which needs external power  “Power supply for the indoor aerial” (P. 56)  Connect “T-V LINK” compatible recording device to “EXT-2”.  “T-V LINK”  “What is “T-V LINK”?” (P. 11)  When using an indoor aerial which needs external power, connect the aerial directly to the TV.  “Power supply for the indoor aerial” (P. 56) SETTINGS Care when setting Watch pay-TV digital channels

 Power requirements  Installation requirements Subscribe to a broadcasting company beforehand. A Smart  Connect the power cord only to a 220-240V,  To avoid overheating, ensure the unit has ample Card (B) will be sent by the broadcasting company after 50/60Hz AC outlet. room. subscribing to it. It may be necessary for you to purchase a  When attaching the TV to the wall, use the Conditional Access Module (A) in addition to the Smart Card. optional JVC wall mounting unit 200mm Consult your broadcasting company or retailer.

 Consult a qualiﬁed technician. 1 Unplug the power cord TROUBLE?  See the included manual on mounting procedures. 2 Insert “B” into “A”. A  JVC assumes no responsibility for damage due to improper mounting. 3 Insert “A”.  200mm × 200mm mount which conforms to VESA 4 Plug the power cord, and turn the power on. standards. 150mm 50mm 150mm 50mm 5 Perform necessary settings  “Common Interface” (P. 43) B  Pay-TV analogue channels cannot be watched. 7 8

7-8 6/29/2006 1:12:51 PM Connecting external devices VCR / DVD / other devices You can connect many different devices to the rear panel of the TV.  Connect “DVI” devices Please read the user manuals of each device before setting up. Watching videos ENGLISH : signal direction  (P. 56) EXT-1 (Connecting cables are not supplied with this TV.) Output  Input   “T-V LINK”  (P. 11) · Composite signal · Composite signal / · Sound L / R RGB / S-VIDEO · Sound L / R PC  Use S-VIDEO  “S-IN” (P. 26)

To “EXT-3” R/L (PC IN) Dubbing videos EXT-2 Using “T-V LINK” Output  Input  IMPORTANT! AERIAL · Composite signal · Composite signal /  Check for PC compatibility · S-VIDEO (only for RGB / S-VIDEO  “Technical information” (P. 56) DTV) · Sound L / R · Sound L / R PC IN · T-V LINK  Use S-VIDEO  “S-IN” (P. 26) Game consoles  Use DTV S-OUT  “S-OUT” (P. 26) (R)  Select dubbing sources (L) EXT-3  “DUBBING” (P. 26) PREPARE  Connect a decoder  “Decoder (EXT-2)” (P. 36) Video camera VCR / DVD recorder (“T-V LINK” compatible) EXT-2 EXT-3 Watching videos (T-V LINK) Output  Input  · Composite signal / S-VIDEO · Sound L / R

Satellite broadcast tuner Watching DVDs EXT-1 EXT-4   Output Input USE · Component signal (Y) (P. 58) (Pr) Not available. · Sound L / R (Pb) (For service adjustments) (R)  “Component Auto Select”  (P. 36) (L) EXT-4

(R) (L) DIGITAL AUDIO AUDIO OUT EXT-5 Connecting Headphone OUT HDMI devices DVD player EXT-6 EXT-6 EXT-5 Output  Input  (HDMI) (HDMI) · HDMI signal (P. 58) SETTINGS  “HDMI Setting”  (P. 36)  EXT-6 input does not support analogue sound.

Ampliﬁer CI (Common Interface) slot AUDIO OUT (“Watch pay-TV digital channels” P. 8) Ampliﬁer Listening to the TV on external speakers  (Digital optical compatible) Output (L) (R) · Sound L / R

DIGITAL AUDIO OUT Listening to the digital audio of digital TROUBLE? DVD player channels on external speakers Headphones (HDMI compatible) Output   Audio signals received from · Digital sound (P. 58) EXT-5 and EXT-6 can not  be sent to the “AUDIO OUT” The sound from analogue channels Satellite broadcast tuner and external devices cannot be output. terminal. (HDMI compatible) “Dolby Digital output from the DIGITAL AUDIO OUT terminal”  (P. 57) 9 10

9-10 6/29/2006 1:12:52 PM Initial settings Register digital / analogue channels on TV. These channels can be edited later. Begin  The remote control

(In this manual, digital terrestrial broadcasting is indicated as digital channels, doesn’t work ENGLISH analogue terrestrial broadcasting and analogue cable TV as analogue channels.) 1

 Shown only when powering on for the ﬁrst time.  The power button on the unit can also be used.  Conﬁrm the mode is set to “TV”.  To the previous screen  Set digital channels 2 IMPORTANT!  Exit  Select a language

First Time Installation > Language Setting Step 1: Please choose language 1  Language for on-screen  select If the “JVC” logo does not appear or if you 1 Language Català displays when watching digital English wish to make changes later Castellano channel including the DTV  Digital channel settings : “Conﬁgurations” (P. 41) menu. “Installation” (P. 45) 2

set PREPARE Analogue channel settings : “Set Up” (P. 36) Conﬁrm “Spain” is set

First Time Installation > Country Setting Step 2: Please choose country  This TV can only receive 2 Country Spain Spanish digital channels.

Set the aerialStart Channel power_ _ supply Stop Channel _ _  Antenna PoweModer Add Only when using an aerial which 3 Start Scan On Off needs external power, select “On”. USE TV/DTV  “Power supply for the indoor aerial” (P. 56)

Scan digital channels

First Time Installation > Service Scan First Time Installation > Service Scan Step 3: Please press OK Step 3: Please press OK 4 Service Scan Automatic Service Scan Automatic _ _ Start Channel _ _ TVE 1 Start Channel TVE 2 _ _ BACK Stop Channel _ _ 24H TVE Stop Channel Mode Add Mode Add Start Scan Start Scan

UHF33 : 3 Services found SETTINGS What is “T-V LINK”? Register digital channels _ _ Teema Stop Channel Connecting the TV to a “T-V LINK” 5 Teema Scan completed! StoreMode services? Add Teema compatible device allows : Yes Start ScaNon

 Analogue channels to be instantly registered on the device.  If digital channels are not found, the following message will appear.  The “DIRECT REC” function to be used. TROUBLE?  “Technical information” (P. 56) No services found!  (Next page) OK !  “T-V LINK” variations “T-V LINK” (JVC) “Q-LINK” (Panasonic) “Megalogic” (Grundig) “Data Logic” (Metz)  After completing following steps, read “When the TV cannot ﬁnd the digital “SMARTLINK” (Sony) “Easy Link” (Philips) channels” (P. 14) and try scanning digital channels again

11 12

11-12 6/29/2006 1:12:56 PM Initial settings (continued) Conﬁrm the language  When change a language When the TV cannot ﬁnd the digital channels

select ENGLISH > Language  Language for on-screen analogue 3 channel displays and menus (excluding the DTV menu) Check the following points

 Is the TV connected correctly to the aerial?  Change the direction of the indoor aerial.  When not using analogue channels   @  Is there a digital channels transmission tower nearby?  Turn “Attenuator” to “On” (P. 36), since the radio waves are too strong. IMPORTANT!  When using analogue channels (or cable TV)   ⁄

Set analogue channels  Register digital channels again  “Service Scan” (P. 45)

4 PREPARE Register analogue channels  > Auto Program If you still cannot watch digital channels after following the steps above, there may be a problem Country  When change a country United Kingdom Ireland with your aerial or its cable. Or, the signal may be too weak.  Consult your retailer 1 Deutschland Switzerland select France Danmark Italia Sverige España Österreich Nederland Norge Belgium Suomi When the digital channel reception is poor >> Auto Program  If “ACI Start” appears, select and start settings.

CH 28 (This will set up cable television channels.) The “Missing or weak signal” message appears.  “What is “ACI” (Automatic Channel 14% Installation)?” (P. 56) Check the following points USE

Check what was registered  Is the TV connected correctly to the aerial? > Edit  Change the direction of the indoor aerial. PR ID CH/CC  Edit analogue channels  Conﬁrm AV 2 01 TVE1 CH 21  Is there a digital channels transmission tower nearby? 02 CH 22  @ in “Editing analogue 03 CH 23  Turn “Attenuator” to “On” (P. 36), since the radio waves are too strong. 04 CH 24 channels” (P. 49) 05 CH 25 06 CC 02 07 CC 03 08 CC 04 09 CC 05  Check digital channels signal  Signal Check (P. 45)

Set TV-LINK  When using T-V LINK  When not using  If you still cannot watch digital channels after following the steps above, there may be a problem  T-V LINK T-V LINK with your aerial or its cable. Or, the signal may be too weak. Consult your retailer

3 SETTINGS Download TV Recording Device

 If “Feature Not Available” appears :  Is a T-V LINK compatible device connected to EXT-2?  Is the device turned on?

Initial setting is complete TROUBLE? 5  Edit digital channels  Editing digital channels (P. 47)  If digital channel reception is poor  When the digital channel reception is poor (P. 14)  If analogue channel reception is poor  Troubleshooting (P. 51)  Some digital channels cannot be watched on this TV.  (P.57) 13 14

13-14 6/29/2006 1:12:58 PM Let’s try it out Enjoying your new TV! ENGLISH

Watching PAGE PAGE

digital channels Watching IMPORTANT!  View channel information videos / DVDs  25 17 Select a channel  Watch high quality video (S-VIDEO)  Listen to the radio  Name connected devices PAGE  Dub videos Watching  PC position adjustment PREPARE 23 analogue channels  View channel information PAGE  Register your favourite channels Personal preferences 35 USE

 Adjust the picture Picture  Adjust the sound PAGE  Advanced settings (sleep-timer / child lock, etc.) Viewing teletext  Basic settings  Enlarge the text (channel settings, etc.)   Bookmark your favourite pages Setting digital channels

21 SETTINGS (timer-record / conﬁguration /  Reveal hidden pages channel settings, etc.)

PAGE Using EPG TV and Text mode  View the programme list

for 8 days TROUBLE? 19  Search from a genre  Reserve a programme to watch / record

15 16

15-16 6/29/2006 1:13:14 PM Watching digital channels

Set to “TV” Symbols Name of station Symbols ENGLISH  Mute  Whenever 1 TVE 1 5 changing the 1 Now : 14:00 - 15:00 Noticias channel, “Channel 14:00 Next : 15:00 - 17:00 Golf Information” is Power on displayed. The green power lamp Channel Clock Programme 2 on the TV lights. Noticias domésticas Noticias del mundo

Información económica (No indication) IMPORTANT! Deportes: Flash de noticias  Press again to turn the screen off and put the TV into standby mode. Channel CH33 Switch to digital channels information More information  Symbols description 3 : Reception level Red Yellow Green : Pay-TV channel : Poor : Acceptable : Excellent : Minimum viewing age limit of the programme.

: TV programme : Radio programme Set viewing age limit.  (P. 41) PREPARE

Switch TV / RADIO : Teletext is available (P. 22). : Subtitles are available (P. 29).

t-u : t : Audio in another language is not available. : More information about the programme is available. 4 u : Other audio languages are available (P. 29). 

Dolby Digital : Dolby Digital signal is output from the “DIGITAL AUDIO OUT” terminal (P.57) Select a channel  The information displayed may differ from programme to programme.  To the previous channel 5  PR List

 View subtitles / Select audio PR List USE 1 TVE 1  Channels registered in “Initial language  (P. 29) 2 TVE 2 1 select 3 24H TVE settings” will appear here. 4 CLAN/50 TVE Note Using PR list 5 TM3  You can select only from your 6 LAOTRA  To completely turn off the TV, unplug the AC plug. 7 ONDA6 favourite channels  “Favourite 8 TELEDEPORTE   9 VEO TV Watch pay-TV digital channels (P. 8) 10 VEO 2 mode” (P. 41)  Volume  Add a new station  (P. 45) 2 view  Some digital channels cannot be watched on this TV.  (P.57) EPG

Electronic Programme Guide 14:00 05/05/2006

TVE 1 2 Basic operations using the side buttons 14:00-15:00 Noticias select a channel

05/05 1. TVE 1 14:00 Noticias 1 SETTINGS 06/05 2. TVE 2 15:00 Golf select the channel column 3. 24H TVE 17:00 Noticias Power on TV/AV Using EPG 07/05 4. CLAN/50 TVE 17:15 Música 08/05 1 5. TM3 18:00 Parte meteorológico 09/05 3 view MENU/OK 6. LAOTRA 18:20 Noticias 10/05 7. ONDA6 18:50 Fútbol P Change 11/05 8. TELEDEPORTE 20:20 Noticias 2 the channel 12/05 9. VEO TV 20:30 Parte meteorológico  Display only programmes which match your P selected genre  “Genre” (P. 20) Channels

 Volume  Enter a channel number  Move up or down a channel TROUBLE? Using the E.g. up  You can select only from your favourite number buttons, 1 :   channels  “Favourite mode” (P. 41)  To switch between digital / up / down buttons down analogue channels, or TV / radio, 15 :   use remote control.

 The channels and programme names shown in the illustrations here are examples only. 17 18

17-18 6/29/2006 1:13:38 PM Using EPG (Electronic Programme Guide) You can ﬁnd a digital channel programme from an eight-day programme guide, check its

information, and make a reservation. ENGLISH Display the genre List

 Switch TV / RADIO 1 1 Switch to digital channels Select a genre

Genre 1 select  Quick search IMPORTANT! 2 All General 1 Display EPG Movie select Information 2 set / (red) Display only Entertainment Sports cancel 2 programmes Children Music 3 Genre TV Radio which Documentary search Current Affairs 2 search match your Electronic Programme Guide 14:00 05/05/2006 selected  Only one genre can be

 More than one genre can be selected. selected. PREPARE TVE 1 genre 14:00-15:00 Noticias Genre 05/05 1. TVE 1 14:00 Noticias Find a programme Your selected genres are displayed 06/05 2. TVE 2 15:00 Golf 07/05 3. 24H TVE 17:00 Noticias Electronic Programme Guide 14:00 05/05/2006 4. CLAN/50 TVE 17:15 Música 3 08/05 5. TM3 18:00 Parte meteorológico 09/05 TVE 1 6. LAOTRA 18:20 Noticias 15:00-17:00 Golf 10/05 7. ONDA6 18:50 Fútbol 05/05 1. TVE 1 15:00 Golf 11/05 8. TELEDEPORTE 20:20 Noticias 06/05 2. TVE 2 18:50 Fútbol 12/05 9. VEO TV 20:30 Parte meteorológico 07/05 3. 24H TVE 22:30 Tenis 4. CLAN/50 TVE 08/05 5. TM3 09/05 6. LAOTRA 10/05 7. ONDA6 Date Channel Programme 11/05 8. TELEDEPORTE 12/05 9. VEO TV

 Check programme  Search from genre USE information  Only programmes in the selected genre are displayed.  Genre icon General Current Affairs  Close EPG Movie Telesales  Select the reserved programme beforehand  Display “Timer” Information Leisure 1 (red) Entertainment Bullﬁghting Sports Series Children Adult Music Religion Set “Timer” SETTINGS Documentary Reserve a 2  ¤ in “Using timer-record” (P. 27) programme Find a programme to watch and Conﬁrm the reservation 3  Watch / listen to the programme  (P. 18) record 3 Electronic Programme Guide 14:00 Timer TVE 1  Reserve the programme 14:00-15:00 Noticias 05/05 1. TVE 1 14:00 Noticias 06/05 2. TVE 2 15:00 Golf 3. 24H TVE 17:00 Noticias 07/05 TROUBLE? select a date / a channel / a programme 4. CLAN/50 TVE 17:15 Música 08/05 5. TM3 18:00 Parte meteorológico 09/05 6. LAOTRA 18:20 Noticias (red) : Reserve to record select a column 10/05 7. ONDA6 18:50 Fútbol 11/05 8. TELEDEPORTE 20:20 Noticias (blue) : Reserve to watch (date  channel  programme) 12/05 9. VEO TV 20:30 Parte meteorológico : Reservation time is shorter than the  For more details about the timer-record setting broadcasting time   The channels and programme names shown in the illustrations here are examples only. “Using timer-record” (P. 27) 19 20

19-20 6/29/2006 1:13:44 PM Viewing teletext This TV can display TV broadcasts and teletext on the same channel in two windows.

Switch digital / analogue channels Hold the current page ENGLISH When watching TV Hold the 1 current page HOLD  Release  Press “ ” again 2 TV TEXT IMPORTANT! Display hidden information  Enter a teletext page (answers to quizzes, etc.) Reveal hidden pages REVEAL TEXT

 Move up or down a page PREPARE

down Double the size of the  View sub-pages displayed text

..... Enlarge to the text sub-page SIZE  To change the default language for teletext in digital channels USE  “Teletext Language” (P. 41)

Display your (RED) (GREEN) (YELLOW) (BLUE) 1 favourites list

To the Returns to page “100” Select a coloured button to save your page to index page or a previously designated page SETTINGS 2 (red) INDEX Bookmark your favourite page Enter the number of the page to save LIST MODE 3 Leave the current page open, while you switch to watch TV Switch brieﬂy TROUBLE? Save from teletext 4 to TV CANCEL  Useful when running a page search.  Recall your favourite page  Press the coloured button as in step 2 21 22

21-22 6/29/2006 1:14:17 PM Watching analogue channels Set to “TV”

Channel information Time ENGLISH  Mute TVE1 1 1 12 : 00 (No indication) Channel information and Power on clock  “Time” is displayed The green power lamp only when teletext 2 on the TV lights. broadcasting can be received. IMPORTANT!

 Press again to turn the screen off and put the TV into standby mode. PR list Switch to analogue channels PR List 1  Close PR list AV select 01 TVE1 02 03 04 05 06 3 07 08 09

Using PR list PREPARE 2 view (3 times)  Channels registered in “Initial settings” will appear here. Select a channel select  Select a page  4  To the previous channel   Press a channel number  Move up or down a channel  Switch between mono / stereo / Using the E.g. up bilingual broadcasting number buttons, 1 :   “Stereo / t·u” (P. 36) up / down buttons down 15 :  USE Note  To completely turn off the TV, unplug the AC plug. While the channel Press the number  To watch analogue channels you must is displayed to register it on  Volume register them beforehand.  “Auto Program” (P. 36) Set 1 - 4? Programmed! Disappears after Hold down a few seconds for 3 seconds  Recall the favourite channel Basic operations using the side buttons Press the  Customisations TVE1 number you 1 1 (P. 36) to the picture SETTINGS Register a registered of a favourite Power on V TV/A channel to a channel get saved 1 Favourite 1 - 4? as well. MENU/OK button Change P FAVOURITE 2 the channel  Check your favourite channels Press “ ” and conﬁrm that the channels P CHANNEL you have registered have a d beside them

 Delete a favourite channel  Volume “MENU”  “ ”  “Features”  “Favourite Setting” TROUBLE? >Favourite Setting select delete >Favourite Setting

1 PR 01 1 PR 01

2 PR 03 2 PR 03

3 PR 05 3

4 PR 07 4 PR 07

23 24

23-24 6/29/2006 1:14:20 PM Watching videos / DVDs Select the video source Advanced functions ENGLISH EXT Mode 1 select 1 0 AV Display the 1 EXT-1 2 EXT-2 menu bar 3 EXT-3 1 4 EXT-4 5 HDMI1 6 HDMI2 2 watch 7 PC 8 DTV E.g. For EXT-1 Select “Set Up” Select “EXT Setting” Set Up

1 select 1 select IMPORTANT! Auto Program 2 Edit/Manual Language Decoder(EXT-2) Off Component Auto Select Off Operate the connected device and play a video EXT Setting Set Up HDMI Setting Attenuator Off PC Position 2  Operate JVC recorders and other devices (P. 33) 2 next 2 next

1 Select the EXT connected to S-VIDEO 2 Set S-VIDEO input

Select the video source using PREPARE Switch > EXT Setting > EXT Setting  The device EXT-1 Dubbing select EXT-1 Dubbing the side buttons EXT-2 EXT-2 selection to S-VIDEO EXT-3 EXT-3 display will TV/AV input / output TV TV EXT-4 EXT-4 change from DTV DTV

1 V/AV S-IN E1 to S1. T  S-OUT is Select the MENU/OK S-OUT not available P  Cancel this mode Press “ ” in 2 again 2 video source (Digital channels) when EXT-2  Set the S-OUT  Cancel S-IN at “EXT-2”, then select “DTV” and press receives an yellow button. (available only for digital channels) P RGB input.

MENU 1 2 USE /OK Select an EXT to assign a name to Show the name list

3 > EXT Setting > EXT Setting EXT-1 Dubbing select EXT-1 Dubbing ID List EXT-2 EXT-2 EXT-3 EXT-3 VHS S-VHS TV TV DVC  To TV CAM EXT-4 EXT-4 SAT DTV DTV STB GAME DVD Edit names DVR PC position adjustment of connected devices 3 Select a name from the list Display the ID LIST > EXT Setting > EXT Setting EXT-1 Dubbing ID List 1 select EXT-1 Dubbing EXT-2 DVD EXT-2 EXT-3 VHS EXT-3 menu bar SETTINGS S-VHS 1 TV DVC TV CAM EXT-4 SAT EXT-4 DTV STB DTV GAME DVD DVR 2 set Select “Set Up” Select “PC Position”  Clear the name Select the blank space in 3 1 select Set Up 1 select Auto Program 2 Edit/Manual Language Decoder(EXT-2) Off Component Auto Select Off EXT Setting Set Up HDMI Setting 1 2 Attenuator Off Select the arrow Select the dubbing source PC Position 2 next 2 next > EXT Setting > EXT Setting EXT-1 Dubbing EXT-1 Dubbing Set up select select TROUBLE? EXT-2 EXT-2  Shown only when “PC” is selected. dubbing on EXT-3 EXT-3 TV TV 1 EXT-2 EXT-4 EXT-4 PC Position adjust  Reset position  DTV DTV 3 DUBBING  Record digital channels with S-VIDEO Set S-OUT at “DTV”. 2 set 25 26

25-26 6/29/2006 1:14:43 PM Using timer-record DTV original function and setting, such as a recorder-linked timer-record setting,

can be selected from the DTV menu. ENGLISH Input / conﬁrm timer-record settings Switch to digital  Switch TV / RADIO 1 PR TVE 1 Select the channel channels Start 17:15 1 End 18:00 Enter the time and date with number buttons Date 05/05/2006 Mode Once Select the reservation mode (Once / Daily / Weekly) Audio PCM / Analogue Normally set to “PCM / Analogue” (PCM / Analogue, Dloby Subtitle Off Digital)  (P. 57) Display the menu bar Maturity Rating Lock Set subtitle recording (Off / On) IMPORTANT! Lock the recording with the maturity rating (Lock / Unlock)

2  A message will be displayed if there is problem with the reservation  In the following cases, enter the PIN code  “When entering the PIN Code” (P. 38) · When changing the “Maturity Rating” Reserve a · When reserving a channel which is set to “Lock” (P. 47) Select “DTV” programme 1 select  to record Set TV programme At the start time, the channel will PREPARE 3 Record automatically change and the 2 Radio programme device connected to EXT-2 will begin recording the programme. DTV 14:00 05/05/2006 2 next PR Start End Date Mode (red) 1 :TVE 1 17 : 15 18 : 00 05/05 /2006 Once : When “Maturity Rating” is set Select “Timer” to “Unlock” 1  DTV Menu select If you reserved the programme using EPG, the screen will return to EPG instead. 4 Timer  Step 3 in “Timer” (P. 20) Edit PR Configuration Setup Prepare for recording Installation 2 next · Set the recording device to external input mode before the start time. 3 USE · Manually set the timer on T-V LINK incompatible devices. For details, refer to the device’s manual. Set “Timer” (red) · Make sure that recording times on the recording device do not overlap with recording times on the TV. Timer 14:00 05/05/2006 · Some T-V LINK compatible DVD recorders may not work correctly. PR Start End Date Mode 5 Timer list empty  When Rec Timer has been set, the power lamp on the TV will :  Start blinking 3 minutes before the start time (green or red) To the previous Light during recording (green or orange) screen Select an item  1 select Please select timer Input / conﬁrm timer-record settings 6 Record Remind  Exit  1 PR TVE 1 Select the channel 2 Start 17:15 SETTINGS  Up to 20 programmes can be next Enter the time and date with number buttons reserved. Date 05/05/2006  DTV menu Mode Once Select the reservation mode (Once / Daily / Weekly) cannot be  Cancel a reservation Reserve a operated with the Select the reservation. Press “ ”. Select “Yes” and  A message will be displayed if there is problem with the reservation side buttons. programme to press “OK” button. watch   If the TV’s power is off at the Change a reservation Remind Set TV programme Select the reservation and press “OK”. start time, nothing happens. 2 Radio programme  At the start time, the channel will  Search a channel using EPG Press “ ” automatically change. TROUBLE? 14:00 05/05/2006 PR Start End Date Mode (blue) 1 : TVE 1 17 : 15 - - - - - 05/05/2006 Once

7  If you reserved the programme using EPG, the screen will return to EPG instead.  Step 3 in “Timer” (P. 20)

27 28

27-28 6/29/2006 1:14:46 PM Useful functions

Subtitle Selection 1 select ENGLISH Off On 1 2 set Off : Don’t display On : Display 1 select “Features”  By default, the language set in “Subtitle Language” 2 Features (P. 41) is automatically selected. 2 When not broadcast in that language, another next IMPORTANT! broadcast language is automatically selected.  When no subtitles are broadcasted, “No Subtitles” is Set a time for > Features 1 displayed. Sleep Timer select the TV to turn Child Lock Appearance Type A Blue Back On “Sleep Timer” View itself off Favourite Setting  Switch to another language 3 Illumination Bright Power Lamp On subtitles 1 SLEEP TIMER Subtitle Selection select “ON” 2 next SUBTITLE Off

> Sleep Timer (Digital channels) On PREPARE 1 select a time in 2 Off next 4 minutes 1 select Spanish 2 set English  Cancel Set the time to “0” in step 4 2 set  Remaining time You can confirm the remaining time at step 4, : Special subtitles for the hearing impaired after repeating this process. Undefined : When the subtitle’s language cannot be identified

 USE The language that can be selected depends on the High : For stereo sound broadcast. Enjoy Low : For stereo sound ambient (when the sound distorts in “High” mode) sound By default, the language set in “Audio Language” (P. 41) 3D Cinema Sound High Mono : For mono sound is automatically selected. 3D CINEMA (emulates a stereo-like sound) When not broadcast in that language, another broadcast SOUND language is automatically selected. Off : Turns off “3D Cinema Sound”  Switch to another language 1

select SETTINGS Audio Selection Spanish Zoom 1 select English Auto Select audio Regular Panoramic 2 set 14:9 Zoom language 16:9 Zoom 16 : 9 Zoom 16:9 Zoom Subtitle AUDIO : Special audio track for the visually impaired Full 2 set SELECTION Undeﬁned : When the audio’s language cannot be Change the (Digital channels) identiﬁed Move the picture with Dolby : Dolby Digital aspect ratio 1 or 4 while this bar is displayed

 The language that can be selected depends on the ZOOM TROUBLE? broadcast.  When set to “Auto”, the aspect ratio will turn to the ratio obtained from the  Please read ““Dolby Digital” output from the information the TV received. “DIGITAL AUDIO OUT” terminal” (P. 57) before Without receiving aspect information, it will be the setting in “4:3 Auto Aspect” selecting “Dolby” (P. 39)  Not available in 1080i (1125i) / 720p (750p) signals.  In PC mode, “Regular” and “Full” can be selected.

29 · Subtitle / Audio selection / Sleep timer / Zoom / Multi-picture, etc. 30

29-30 6/29/2006 1:15:00 PM Useful functions (continued) ENGLISH Select the number of screens 1 select 1

1 select “Features” 2 set 2 Features 2 next IMPORTANT!

Selecting “ ” returns to normal viewing mode > Features select  Not available in PC mode. Sleep Timer Child Lock Appearance Type A “Child Lock” Blue Back On Favourite Setting Illumination Bright 3 Power Lamp On  Watch in dual-picture mode E.g. You can watch TV and video at the same time. 1 >> Set ID No. enter an “ID NO.” (For wide aspect ratio signals) (a secret number of your choice)

PREPARE 4 2 to the next column Main 3 set Main Sub > Child Lock Sub PR ID CH/CC AV select a channel to lock Stop 01 TVE1 CH 21 02 CH 22 03 CH 23 children from 04 CH 24   5 05 CH 25 Switch between Change the channel 06 CC 02 watching 07 CC 03 the sound sources 08 CC 04 Watch in  (Main) 09 CC 05  speciﬁc ID multi-picture channels mode  (Sub) TVE1 > Child Lock CHILD LOCK PR ID TVECH/CC 2  AV Lock more channels MULTI-PICTURE 01 TVE1 CH 21 02 TVCH 322 (Analogue 03 CH 23  Repeat steps 5 and 6  When watching digital channels, there may USE 04 CH4CH 24 channels) 6 05 CH 25 be occasions where the aspect ratio changes, 06 CC 02 07 CC 03 for example during commercials. In this case, 08 CC 04 09 CC 05 the layout of the screen in dual-picture mode changes automatically according to the aspect ratio signal. 7  Select an analogue channel in 12-screen mode All registered channels are displayed as still images.  Release a channel Press “ ” again in step 6 1 select a  View a locked channel Use the numerical buttons to enter the channel number.

channel When n appears, press “ ” and enter your “ID No.”. SETTINGS (If you forget your “ID No.”, check it in step 4.) Main 2 watch

Only the selected frame has a moving picture. Current programme  Move up or down a page  Take  Not available when in digital channels, EXT-5, or EXT-6 input. snapshots

of the screen TROUBLE? FREEZE Still picture (Analogue  Cancel Press “ “ again, or change the channel channels)  Not available when the SUB-PICTURE is displayed, or when in digital channels or PC mode.  You cannot save or export the snapshot.

31 32

31-32 6/29/2006 1:15:03 PM Operate JVC recorders and other devices The included remote control can be used to operate JVC recorders

and other devices. Select VCR / DVD recorder / HDD recorder ENGLISH Select a device VCR VCRs Home 1 DVD recorders theatre DVD recorders HDD recorders system HDD recorders Operate the VCR,  Operate DVD / HDD recorder menus  Playback / Record etc. IMPORTANT! TV (P. 6) DVD players DVD recorder or HDD recorder Display menu Select Rewind / Playback TV VCR/DVR VCR/DVR / Fast-forward Record / Stop / Pause HC DVD Display Back to OK previous menu PREPARE top menu Select a chapter  The indicator lights for 3 seconds each time the remote control is operated.  Display the subtitle (DVD / HDD recorder mode)  Press “ ” Turn on the device 2  Operate DVD menus  Playback etc. Display menu Select Rewind / Playback Operate the / Fast-forward USE Operate the device DVD player Stop / Pause Back to 3  Other buttons can be used to DVD Display OK previous menu operate the TV at any time. top menu Select a chapter

 Display the subtitle  Press “ ” Try changing the remote control code

if you cannot operate a recorder.  Operate HC menus  Playback etc.  Code A or 1 (Default)  Code C or 3 SETTINGS Display menu Select Rewind / Playback / Fast-forward Operate the Stop / Pause Press and hold Press and hold home theatre Display Back to  OK previous menu Conﬁrm the code for your recorder by checking the manual it system top menu Select a chapter came with.  HC Some models of JVC devices cannot be operated with this  Display the subtitle  Press “ ” remote control. TROUBLE?  JVC DVD recorders and HDD recorders are set to code “C” or  Mute  Press “ ” “3” by default.  Volume  Press “ ” Note  If the battery is removed, the remote control code reverts back  Select a surround mode  Press “ ” to code A or 1. 33 34

33-34 6/29/2006 1:15:05 PM Just the way you like it Customising your TV Display the menu bar Menu Item Adjustments / Conﬁgurations ENGLISH 1 Selected menu’s title Picture Mode Picture mode (Bright / Standard / Soft) Bright-1 Backlight brightness (Darker  Brighter) Picture Picture Contrast Contrast (Lower  Higher) Sound

Picture  Features Bright-2 Brightness (Darker Brighter) Select a menu Set Up Sharp Sharpness (Softer  Sharper) 1 select DTV Colour Colour (Lighter  Deeper) 2 IMPORTANT!  DTV menu is available only when Hue Tint (Reddish  Greenish) watching digital channels  (P. 37) Colour Temp. Colour temperature (Warm / Normal / Cool) 2 next Features Finer picture adjustments (P. 39) Stereo / t · u Mode / Language (v : MONO / s : STEREO / t : SUB1 / u : SUB2) Bass Low tones (Weaker  Stronger)

Picture PREPARE Select an item Sound Treble High tones (Weaker  Stronger)

select Picture Mode Standard Balance Speaker balance (Left Stronger  Right Stronger) 3 Bright-1 Contrast 3D Cinema Sound Ambience level (High / Low / Mono / Off) Bright-2 Sharp MaxxBass *1 Emphasize the bass sound (Off / Low / High) Colour Hue Voice Enhancer Sound enhancement technology (On / Off) Colour Temp. Cool Features  To the previous Sleep Timer Timer for turning off the TV (P. 30) screen Child Lock Stops children from watching speciﬁc channels (P. 32)  Items Features Appearance Format for displaying the channel number (Type A / Type B) Adjust / Conﬁgure USE 1 adjust / Displays a blue screen and mute the sound when the signal is weak or  Exit Blue Back 4 select absent (On / Off)  Favourite Setting Clear favourite channel settings (P. 23) Illumination Lights illumination lamp (P. 5) while the TV is on (Bright / Soft / Off)  The menu disappears 2 set Picture Mode Standard after one minute of Power Lamp Lights power lamp (P. 5) while the TV is on (On / Off) inactivity. Auto Program Select a country, it automatically registers channels (P. 13, ⁄)  When adjusting Change registered channels or add new ones (P. 49) with the sliding-bar 1 adjust Edit / Manual

Select a language for on-screen analogue channel displays and menus SETTINGS Language (excluding the DTV menu) (P. 13, Ÿ)

Move Decoder(EXT-2) For when connected to VCR with “T-V LINK” (On / Off) 2 set Set Up  When selecting Changes the TV input to “EXT-4” when a component signal is input to “EXT- Component Auto Select 4” (On / Off) (Not available when viewing PC) from presets 1 select EXT Setting For use with video players and other devices (P. 26) Standard Standard HDMI-1 (EXT-5) : Size (1 / 2 / Auto), Audio (Digital / Analogue / Auto) HDMI Setting HDMI-2 (EXT-6) : Size (1 / 2 / Auto) The item will change. 2 set TROUBLE? Attenuator For when digital channels are not received because of too strong radio waves (On / Off)  Some items have a PC Position PC position adjustment (P. 25) sub-menu.  Other settings · Change the aspect ratio  “ZOOM” (P. 30) · Turn on “3D Cinema Sound”  “3D CINEMA SOUND” (P. 30) *1 MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries. 35 36

35-36 6/29/2006 1:15:15 PM Using DTV menu Digital channels original function and setting can be selected from the DTV menu. Menu Item Adjustments / Configurations ENGLISH Switch to digital channels 1 Timer Reserve a programme to record / watch (P. 27) Edit / Delete / Lock registered digital channels or add them to favourites. Edit PR (P. 47) Display the menu bar Country Confirm the country of installation (P. 41) IMPORTANT! 2 Menu Language Select a language for on-screen menus (P. 41) Configuration Audio Language Select a default language for audio (P. 41) Subtitle Language Select a default language for subtile (P. 41) Select “DTV” Teletext Language Select a default language for teletext (P. 41) 1 select PREPARE 3 DTV Enter PIN Code Change PIN code (P. 41) Favourite Mode Enable your favourite channels (P. 41) DTV 2 next Maturity Rating Restrict programmes according to the age (P. 41) When the Dolby Digital signal is received, you can select to output the Select “Setup” Digital Audio Output signal from the DIGITAL AUDIO OUTPUT terminal. (P. 43) 1 DTV Menu select Setup Select the display time for channel information (2 sec / 5 sec / 8 sec) 4 Timer Banner Duration Edit PR Configuration Receiver Upgrade Upgrade your tuner software as newer versions becomes available. (P. 43) Setup Installation Common Interface Set Conditional Access Module (P. 43) 2 next USE  To the previous Antenna Power Power supply for the indoor aerial (P. 43) screen Select an item Installation Service Scan Register channels (P. 45)  Setup 14:00 05/05/2006 select Digital Audio Output PCM Banner Duration 2 sec Signal Check Check the broadcast signal (P. 45) 5 Receiver Upgrade Auto Common Interface No CI Module Antenna Power Off Factory Settings Initialise the DTV settings (P. 45)  Exit  E.g. “Antenna Power” When entering the PIN code  DTV menu cannot SETTINGS be operated with Change setting When watching digital channels or changing DTV menu settings, it may be necessary for you to the side buttons. select enter a PIN code. 6 Antenna Power Off Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.  The default PIN code is “0000”.  You can set your own PIN code.  “Enter PIN Code” (P. 41) E.g. “Antenna Power”

Finish

7 TROUBLE?

37 38

37-38 6/29/2006 1:15:18 PM Advanced picture adjustment By default, the TV automatically adjusts itself for the best picture. ENGLISH For Off Min Max Auto Super Display the menu bar natural-lookingSuper DigiPure Auto : Function is : When the picture : When noise : Automatically DigiPure turned off loses sharpness appears adjusts 1 outlines

For smooth Off On Auto Movie Super DigiPure Auto : Function is : Function is : Automatically Select “Picture” Theatre cinema ﬁlm turned off always on adjusts IMPORTANT! 1 select 2 Picture

For Off On Colour Movie Theatre On 2 next natural-looking : Function is : Maintain a natural Management pictures turned off colour balance

Select “Features” PREPARE

Picture 1 select Picture Mode Standard Bright-1 3 Contrast Bright-2 Sharp Fix Off On Colour Hue On Colour Temp. Cool Picture Movie Theatre : Function is : Make it easier to view Features bright / dark Management turned off bright / dark pictures 2 next pictures Select an item

> Features 1 select Super DigiPure Auto  Movie Theatre Auto Fix Off On Not available when 4 On Colour Management Picture Management On Smart Movie Theatre On “Picture Mode” is set  Smart Picture On : Function is : Make it easier to view To the previous MPEG Noise Reduction On brightness of Colour System Picture turned off white areas to “Bright” (P. 36). USE screen 4:3 Auto Aspect white areas  2 next E.g. “Super DigiPure”

 Change settings To reduce Off On Exit MPEG Noise On MPEGMovie Theatre video : Function is : When noise appears  1 select Reduction turned off 5 noise

 The menu disappears Super DigiPure Auto after one minute of 1 Select the screen to change settings on 2 inactivity. E.g. “Super DigiPure” set Main Sub >> Colour System SETTINGS : Main picture : Sub-picture in When Main Auto MULTI-PICTURE mode (P. 31) Finish Sub PAL Colour there is no 6 System colour 2 Select the colour system PAL SECAM NTSC 3.58 NTSC 4.43 Auto : Western : Eastern Europe : USA : USA : When watching Europe / France 3.58 MHz 4.43 MHz videos, etc.

>> 4:3 Auto Aspect Select a default aspect ratio for Auto in “Zoom” (P. 30) TROUBLE?

Panoramic Panoramic Regular 14:9 Zoom Set a default Regular 4:3 Auto 14:9 Zoom aspect ratio Aspect 16 : 9 4 : 3 14 : 9

39 · Reduce noise / Watch a more natural picture 40 · Set the aspect ratio, etc.

39-40 6/29/2006 1:15:21 PM DTV conﬁguration Available for favourite channel selection, changing PIN code, and selecting

maturity rating, etc. ENGLISH The country of Spain Country Spain Switch to digital channels installation  Spain only

1 Select a Menu language for on- English English Castellano Català Language screen menus

Display the menu bar IMPORTANT! Select a default Spanish Catalan  For visually Audio Spanish  2 language for impaired Language Basque Gallegan audio

Select a default Subtitle Spanish Catalan  For hearing Select “DTV” language for Spanish  1 select Language Basque Gallegan impaired PREPARE 3 subtitle Select a default Spanish Catalan DTV Teletext 2 language for Spanish next Language Basque Gallegan teletext Select “Conﬁguration” 1 DTV Menu select 1 Select “Enter Pin Code” 2 Input the current code Timer Audio Language Spanish Configuration 14:00 05/05/2006 4 Subtitle Language Spanish Edit PR 1 Country Spain select This functionTeletext is locked. Language Spanish Configuration Menu Language English Please enter PIN code Enter PIN Code Setup Audio Language Spanish Subtitle Language Spanish Favorite Mode Off Installation Teletext Language Spanish

Maturity Rating USE Enter PIN Code 2 next Favourite Mode Off Maturity Rating 2 Change PIN next   Default is “0000”. To the previous Select an item code  “When entering the PIN code” (P. 38) screen Configuration 14:00 05/05/2006 select  If you forget the code Input “0081”  Country Spain Enter PIN Code Menu Language English 3 Audio Language Spanish Input a new code twice. 5 Audio Language Spanis Audio Language Spanish Audio Language Spanish Subtitle Language Spanish Teletext Language Spanish Subtitle Language Spanis Subtitle Language Spanish Subtitle Language Spanish Enter PIN Code Enter new PINT eletextcode Language Spanis Confirmation Teletext Language Spanish ConfirmPIN PI NcodeTeletext change Languaged Spanish Favourite Mode Off Enter PIN Code Enter PIN Code OKEnter PIN Code Maturity Rating  Favorite Mode Off Favourite Mode Off Favorite Mode Off Exit Maturity Rating Maturity Rating Maturity Rating  Finish 1 Select “Favourite Mode” 2 Select “On” SETTINGS 1 6 Enable your Configuration 14:00 05/05/2006 select Country Spain 1 select Menu Language English favourite Audio Language Spanish On Subtitle Language Spanish channels Teletext Language Spanish Enter PIN Code Favourite Mode Off 2 set Favourite mode Maturity Rating  If you cannot select “On”, register channels in “favourites” ﬁrst  “Favourites” (P. 47)  Only programmes with 1 Select “Maturity Rating” 2 Select age a maturity rating can TROUBLE? Configuration 14:00 05/05/2006 Set the Country D 1 select Maturity Rating 1 select be restricted. Country Spain Menu Language Menu Language English None 4 Audio Language viewing age Audio Language Spanish Age 4  To watch the restricted 5 Age 5 Subtitle Language Spanish Subtitle Language 6 Age 6 Teletext Language Spanish Teletext Language D programme, the PIN limit 7 Age 7 Enter PIN Code 8 Age 8 Enter PIN Code Favourite Mode Off code must be entered. 9 Age 9 Favorite Mode Maturity Rating 2 10 Age 10 2 next Maturity Rating set Maturity Rating 11 Age 11 12 Age 12 (X-Rated): For adult channels 41 42

41-42 6/29/2006 1:15:28 PM DTV setup Available for setting power supply for the aerial, and upgrading the tuner software,

etc. Output the PCM Dolby Digital ENGLISH PCM : The Linear PCM : The Dolby Digital Switch to digital channels Dolby Digital signal is output signal is output signal  Only when the Dolby Digital signal is received Digital Audio Output 1  Please read “Dolby Digital output from the DIGITAL AUDIO OUT terminal” (P. 57) before setting.

You can upgrade the tuner software as newer versions become available. Normally set to “Auto”.

Display the menu bar Auto Manual IMPORTANT! Auto : Automatically download and : Manually download and 2 install software upgrades install software upgrades  This occurs at midnight when  When you change the setting, the TV’s power is off. enter PIN code  When JVC or the broadcasting station informs you of the new software, download it as follows. Select “DTV” 1 2 1 select Select “Manual” Select “Search for new” PREPARE 1 select 1 select Upgrade Software Version 3 3.07.00 tuner Manual OK Search for new 2 DTV Receiver Upgrade next 2  If upgrading is not necessary, start 2 next  Enter PIN code if needed. select “OK” to ﬁnish. Select “Setup” 3 Select “Yes”

DTV Menu 1 select 1 select New software found. “Software upgraded Downloading new software 4 Timer Would you like to upgrade now? successfully! TV will Edit PR Yes In standby No Cancel Configuration now reset!”. Setup Installation 2 next USE 2 next  If the TV has upgrade to the latest tuner software, the message “Search completed. No new software found” will appear.  To the previous Select an item  Select “In standby” instead of “Yes” if you want to upgrade the software automatically when the TV is turned off. screen Setup 14:00 05/05/2006 select  Digital Audio Output PCM Banner Duration 2 sec To watch pay-TV digital channels, use the Conditional Access Module menu. 5 Receiver Upgrade Auto Common Interface No CI Module Antenna Power Off This function can only be used when pay-TV can be received in your region.

 Exit Set No CI Module  When the Conditional Access Module etc. is  No CI Module : Function is not inserted after subscribing to the broadcasting Conditional available company, this function is available.  “Watch pay- Finish Access TV digital channels” (P. 8) SETTINGS Module 1 Press “OK” button to display the 2 Follow the instructions on the 6 Common Interface Conditional Access Module menu screen to set up pay-TV  The content of the menu is different depending on the broadcasting company.  For details, consult your broadcasting company  The language shown in the menu may differ to the “Language” set for the TV.

Power Off On supply for Off : Power not : Power supplied TROUBLE? the indoor supplied aerial  Antenna Power Please read “Power supply for the indoor aerial” (P. 56) before setting.

 Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec) 43 44

43-44 6/29/2006 1:15:34 PM DTV installation Available for registration of digital channels, checking of digital channels signal,

and initialisation of all digital channels settings. ENGLISH 1 Set items

Switch to digital channels Automatic : Scan automatically Scan Manual : Scan a speciﬁed channel range 1 select an item 1 Network : You can select and register only necessary networks. Start Channel Specify a scanning channel range (For “Manual”) Stop Channel 2 change Add : Add a new channel to the registered channel Mode Reinstall : Register all channels again Display the menu bar IMPORTANT! Register a 2 Select “Start scan” 2 new channel Scan Automatic Service Scan 14:00 05/05/2006 Start Channel _ _ Service Scan Service Scan Automatic Stop Channel _ _ TVE 1 Start Channel _ _ TVE 2 _ _ 24H TVE Stop Channel Mode Add Mode Add Start Scan Start Scan Select “DTV” UHF33:3 Services found 1 select PREPARE 3 3 Select “Yes”  For “Network” 1 select Select broadcasting stations from a list 1 select DTV Scan completed! Store services? Network Name RGE 2 next Yes No TDT CAM SFN 2 registered / cancel 2 set Select “Installation” 3 1 registered set DTV Menu select 4 Timer Edit PR Configuration Signal Check 14:00 05/05/2006  This channel is the frequency of the digital Setup Service Channel 33 Installation TVE 1 broadcasting. It differs from the channel number TVE 2 USE Check the 24H TVE displayed in the TV. select 2 next broadcast Signal : Excellent  Select another broadcast channel   To the previous Signal Quality Select an item signal Signal Strength screen 1 select Signal Check  Installation 5 Signal level Service Scan Signal : Excellent Signal Check Poor Acceptable Excellent  Exit Factory Settings  2 next

Finish All registered digital channels are deleted and the DTV menu settings are initialised. Digital channels are 6 reregistered. SETTINGS 1 Enter PIN code

This function is locked. Please enter PIN code Initialise the DTV settings  Default is “0000”. Factory Settings  “When entering the PIN code” (P. 38) TROUBLE? 2 Select “Yes” 1 select Are you sure you want to delete the PR list and reset all settings? Yes No Ÿ in “Initial settings” (P. 12)

2 next

45 46

45-46 6/29/2006 1:15:38 PM Editing digital channels Edit the channels registered with “Automatic” in “Initial settings” (P. 12). 1 2 Select “Name” Change the name ENGLISH

Edit PR List 14:00 05/05/2006 Edit PR List 14:00 05/05/2006 TV 1 select TV 1  Switch TV / RADIO 1. TVE 1 1. TVE 1 select character Switch to digital 2. TVE 2 2. TVE 2 3. 24H TVE 3. 24H TVE Name 4. CLAN/50 TVE 4. VOX channels TVE 1 5. TM3 5. TM3 6. LAOTRA 6. LAOTRA 1 7. ONDA6 7. ONDA6 8. TELEDEPORTE 2 8. TELEDEPORTE 2 Edit a channel Name Number Delete Lock Favourites next Name Number Delete Lock Favourites move position name 3 Name Set

Edit PR List 14:00 05/05/2006 Edit PR List 14:00 05/05/2006 IMPORTANT! Display the menu bar TV TV 1. TVE 1 1. ABCDEFG 2. TVE 2 2. TVE 2 3. 24H TVE 3. 24H TVE Name 4. VOX 4. CLAN/50 TVE ABCDEFG 5. TM3 5. TM3 2 6. LAOTRA 6. LAOTRA 7. ONDA6 7. ONDA6 8. TELEDEPORTE 8. TELEDEPORTE Name Number Delete Lock Favourites Name Number Delete Lock Favourites

Select “DTV” 1 Select “Number” 2 Change the number 3 Select “OK” 1 select PREPARE Edit PR List 14:00 05/05/2006 Edit PR List 14:00 05/05/2006 Edit PR List 14:00 05/05/2006 TV TV TV 1 1. TVE 1 1 select 1. TVE 1 1. TVE 1 select 3 2. TVE 2 2. TVE 2 2. TVE 2 3. 24H TVE 3. 24H TVE 3. 24H TVE Edit a Number 4. CLAN/50 TVE 4. CLAN/50 TVE 4. CLAN/50 TVE 001 PR 0 exists!01 Move it? 5. TM3 5. TM3 5. TM3 OK Cancel channel 6. LAOTRA 6. LAOTRA 6. LAOTRA DTV 7. ONDA6 7. ONDA6 7. ONDA6 2 number 8. TELEDEPORTE 8. TELEDEPORTE 8. TELEDEPORTE 2 next Name Number Delete Lock Favourites 2 next Name Number Delete Lock Favourites Name Number Delete Lock Favourites move Number Select “Edit PR”  Only when the same channel number exists. 1 DTV Menu select  The channels are rearranged in 4 Timer numerical order. Edit PR Configuration Setup Installation 1 Select “Delete” 2 Select “Yes” USE 2 next Edit PR List 14:00 05/05/2006 Edit PR List 14:00 05/05/2006 Delete a TV 1 TV 1 1. TVE 1 select 1. TVE 1 select 2. TVE 2 2. TVE 2  To the previous channel 3. 24H TVE 3. 24H TVE Select a channel 4. CLAN/50 TVE The selected PR will4. CLAN/50be permanently TVE deleted. Do you want to proceed? 5. TM3 5. TM3 screen Edit PR List 14:00 05/05/2006 6. LAOTRA Yes 6. LAOTRNo A TV select Delete 7. ONDA6 7. ONDA6  1. TVE 1 8. TELEDEPORTE 8. TELEDEPORTE 2. TVE 2 2 2 Name Number Delete Lock Favourites next delete 5 3. 24H TVE Name Number Delete Lock Favourites 4. CLAN/50 TVE 5. TM3 6. LAOTRA 7. ONDA6  8. TELEDEPORTE 1 2 Exit Name Number Delete Lock Favourites Select “Lock” Lock

 Edit PR List 14:00 05/05/2006 Edit PR List 14:00 TV  Stop Children select TV To release, press “OK” 1. TVE 1 1. TVE 1 2. TVE 2 2. TVE 2 button again. from watching 3. 24H TVE 3. 24H TVE 4. CLAN/50 TVE 4. CLAN/50 TVE  To enable “Lock” SETTINGS Edit 5. TM3 5. TM3 speciﬁc 6. LAOTRA 6. LAOTRA function, turns the TV off 7. ONDA6 7. ONDA6 Lock icon 6 channels 8. TELEDEPORTE 8. TELEDEPORTE and on again. Name Number Delete Lock Favourites Name Number Delete Lock Favourites Lock  To watch the locked  Enter PIN code if needed channels, the PIN code Finish  “When entering the PIN code” (P. 38) must be entered.

7 1 Select “Favourites”  To move through only your Edit PR List 14:00 05/05/2006 1 Edit PR List TV select TV 1. TVE 1 1. TVE 1 favourite channels and have Register your TROUBLE? 2. TVE 2 2. TVE 2 3. 24H TVE 3. 24H TVE them appear in the PR list. favourite 4. CLAN/50 TVE 4. CLAN/50 TVE 5. TM3 5. TM3  “Favourite Mode” (P. 41) channel 6. LAOTRA 6. LAOTRA Favourite icon 7. ONDA6 2 7. ONDA6 8. TELEDEPORTE set 8. TELEDEPORTE Favourites Name Number Delete Lock Favourites Name Number Delete Lock Favourites  To release, press “OK” button again. 47 48

47-48 6/29/2006 1:15:46 PM Editing analogue channels

Edit the channels registered with “Auto Program” in “Initial settings” (P. 13). 1 Begin 2 Select a destination 3 Finish When coming from “Initial settings” (P. 13), skip to ¤. ENGLISH Move a > Edit > Edit PR ID CH/CC PR ID CH/CC Switch to analogue broadcasting AV select AV channel’s 01 TVE1 CH 21 01 TVE1 CH 21 02 CH 22 02 CH 22 03 CH 23 03 CH 24 position 04 CH 25 04 CH 24 05 CH 25 05 CH 23 1 06 CC 02 06 CC 02 MOVE 07 CC 03 07 CC 03 08 CC 04 08 CC 04 move out 09 CC 05 09 CC 05 move in Display the menu bar 1 Begin 2 Enter a channel name  When selecting a preset name from the “ID List”

> Edit IMPORTANT! > Edit PR ID CH/CC ID List 1 PR ID CH/CC enter AV M6 select 2 AV 01 TVE1 CH 21 MBC (red) 01 TVE1 CH 21 02 CH 22 MCM 02 CH 22 the ﬁrst 03 CH 23 MDR 03 CH 23 04 CH 24 MOVIE 04 CH 24 character 05 CH 25 MTV 05 CH 25 06 CC 02 MTV3 06 CC 02 07 M CC 03 Select “Set Up” Edit a 07 A CC 03 08 CC 04 2 08 CC 04 09 CC 05 set 1 select channel 09 CC 05 3 name  When manually naming a channel

Set Up ID >Edit PREPARE PR ID CH/CC 1 AV enter 01 TVE1 CH 21 2 next 02 CH 22 03 CH 23 2 04 CH 24 next 05 CH 25 Select “Edit / Manual” 06 CC 02 column next 07 JVC CC 03 Set Up 1 select 08 CC 04 3 set column 09 CC 05 Auto Program Edit/Manual Language 4 Decoder(EXT-2) Off Component Auto Select Off EXT Setting 1 2 3 HDMI Setting Begin Select a “CH / CC” Enter a number Attenuator Off PC Position >Edit >Edit  2 next PR ID CH/CC PR ID CH/CC Receives the AV select AV 01 TVE1 CH 21 01 TVE1 CH 21 broadcast Insert a 02 CH 22 02 CH 22 03 CH 23 03 CH 23 Select a row 04 CH 24 04 CH 24 signal. channel 05 CH 25 05 CH 25 > Edit select 06 CC 02 06 CC 02 PR ID CH/CC 07 CC 07 CC 12 USE AV 08 CC 03 08 CC 03 01 TVE1 CH 21 INSERT 09 CC 04 09 CC 04 5 02 CH 22 03 CH 23 04 CH 24 05 CH 25  “CH/CC” List  (P. 55)  06 CC 02 To the previous 07 CC 03 08 CC 04 screen 09 CC 05  1 Edit Delete Delete a > Edit PR ID CH/CC 6 AV channel 01 CH 22 02 CH 23  Exit 03 CH 24 Conﬁrm settings 04 CH 25 DELETE 05 CC 02  06 CC 03 07 CC 04 08 CC 05 09

7 SETTINGS 1 Begin 2 Beginning channel search From high From low frequencies frequencies > Manual > Manual  PR ID CH/CC PR ID CH/CC Auto-search begins, 10 CC 06 (red) 10 CC 06  When using 11 CH 02 (B/G) 11 CH 08 (B/G) and the nearest Finish 12 12 13 T-V LINK 13 frequency is imported. “T-V LINK” 14 or 14 15 15 Download TV Recording Device 16 16  Repeat the previous 17 17 8 18 18 steps until the 19 19 Register a  If necessary, press 3  Adjust desired channel is new channel to change the broadcasting system. > Manual displayed PR ID CH/CC  “Receivable broadcast systems 10 CC 06  If “Feature Not Available” 11 CH 08 (I) 12

MANUAL TROUBLE? appears : (Analogue channels)” (P. 56) 13 3 Set 14  Is a “T-V LINK” 15  When not using > Edit 16 17 ID PR CH/CC 18 compatible device 10 CC 06 “T-V LINK” 19 11 CH 08 connected to “EXT-2”? 12  Picture ﬁne tuning  / 13  Is the device turned on? 14 15  “T-V LINK”  (P. 11) 16  Sound ﬁne tuning  17 18 19 select a system 49 50

49-50 6/29/2006 1:16:19 PM When you have trouble Troubleshooting Problem Actions page  Analogue channels ENGLISH  Is the analogue channel reception poor, too? 51 Severe noise or  Following the instructions in “Severe noise or snow” can solve this problem. snow Not displayed  Digital channels are not displayed 14 (black screen)  When the TV cannot ﬁnd the digital channels  There may be problems at the aerial, radio waves, or the area you live in, where reception is bad. –

Consult your retailer. IMPORTANT! Basics

 Is the TV connected correctly to Remote control  Unplug TV, several minutes later plug it in again. the aerial? stops working –  Change the direction of the aerial.  Is the aerial or its cable damaged? Digital channel screen  Hold down “ ” and “ ” on the TV  Consult your retailer – is frozen simultaneously for three or more seconds to restart. PREPARE Patterns, stripes  It is not a malfunction. Some functions (dark background) Some functions – or noise do not work in the menu do not work depending on the situation.

Screen Aspect ratio changes  Press “ ” to return to your settings. I can’t turn it on! unintentionally 30  Is the power cord connected to the AC outlet correctly? PC screen alignment  Is the aerial receiving interference  Adjust the “PC Position”. 25 from high-voltage power lines or is off USE wireless transmitters?  Consult your retailer  Are connected devices too close  Unnatural colour >>> Adjust “Colour” and “Bright-1”. 36 to the TV? Check your “Colour System” 39  Insert the minimum distance  Noise >>> Set to the following functions. Picture Mode : Standard between the aerial and the Poor picture quality 36 cause of interference until no Super DigiPure : Max 39 interference  Dull picture >>> Set to the following functions.

Picture Picture Mode : Bright 36 Super DigiPure : Min 39 Ghosting

(Doubling of images) SETTINGS  If you connected S-Video output device, check the “S-IN” 26 setting.  If the top of the image is distorted, check the video signal – Strange picture quality itself. The remote when using an external  If movement appears unnatural when receiving a signal – control doesn’t device from a DVD player, etc. with 625p (progressive-scanning), work! change the output setting of the external device to 625i  Are you receiving interference (interlace-scanning).  Are the batteries ﬂat? from signals reﬂected off  Are you more than 7 meters away

mountains or buildings? TROUBLE? from the TV?  Adjust the direction of your   Is the “MODE (TV, VDR/DVR, DVD, HC)” set to “TV”? Sound Adjust the “Bass” and “Treble”. 36 aerial, or change to a Poor sound t u  When viewing teletext, the TV menu bar does not appear.  If receiving a poor signal in “Stereo / · ”, switch to “Mono”. 36 good-quality directional aerial  Depending on the stability of the signal, there may be a time lag when changing channels.  Digital channels.  (P. 14)  Audio signals received from EXT-5 and EXT-6 can not be No sound from the – audio component sent to the “AUDIO OUT” terminal. 51 52

51-52 6/29/2006 1:16:42 PM Troubleshooting (continued) Problem Actions page Problem Actions page ENGLISH

Wrong screen size  Switch “Size” in “HDMI Setting” to “1” or “2”. 36

Screen  LCD panels use ﬁne dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, Black or white dots a very small number of pixels may not light, or may light all appear on the screen – No picture, no sound  Use the cable marked with HDMI logo. – the time. Please understand that this is not a malfunction. HDMI IMPORTANT!

 Check if the device is compliant with HDMI. –  Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for 36 No sound HDMI devices, or “Analogue” or “Auto” for DVI devices. (Not available for “EXT-6”.) No picture, no sound  Some digital channels cannot be watched on this TV. 57 PREPARE  Wait a little for the signal to stabilize when switching the Green and distorted – screen signal format for an “HDMI” device. When “Dolby Digital” is selected in “Digital Audio Output”, the 57

Functions sound of a programme containing “Dolby Digital” signals cannot be output from the TV or the audio system connected to the  Digital channels, EXT-4, EXT-5, EXT-6 inputs, and PC mode Some inputs cannot “Dolby Digital selected! “AUDIO OUT” terminal. cannot be selected in the sub-picture. No analogue audio When the channel is changed, a message will be displayed for be selected in the  RGB input signal of EXT-1 and EXT-2 are not available in – sub-picture available” a few seconds. dual-picture mode.  To listen with the TV or audio system  Select a language without “(Dolby)” from “Audio Selection” 29  Switch “Digital Audio Output” to “PCM” 43  Is the T-V LINK compatible device connected to EXT-2? 56

 Is the SCART CABLE “Fully Wired”? 56 USE  Is the T-V LINK compatible device turned on? “Feature Not Available” – After conﬁrming all the conditions above, press “OK” button again. DTV  The default PIN code is “0000”. If you forget the numbers that Forgot my PIN code! you used to change the default PIN code, ﬁrst input “0081” in 41  Press 2 to start ACI again. the “Enter PIN code” and then register a new PIN code. “ACI Error” If you still receive the “ACI Error” after numerous tries, – 3 Error message press to cancel ACI. SETTINGS “No Recording”  A problem occurs at the recorder. – Locked channels can  Once the PIN code is input, all the lock functions (“Lock” and be watched without “Maturity Rating”) are released. If you want to use the lock – inputting PIN code function again, turn the TV off and then turn it on again. “ No Recording  The displayed video cannot be recorded. Possible” –

 The recorder is not ready for recording. TROUBLE? “ No Recording Media – Problem” Check the videotape or DVD disc. When JVC or the  Upgrade the tuner software by using the “Receiver Upgrade” broadcasting station 43 informs you of the function. software “ No Recording Device  The recorder is recording another programme, or is playing. Busy” – 53 54

53-54 6/29/2006 1:16:43 PM “CH/CC” List Technical information To use the INSERT function (P. 49), ﬁnd the “CH/CC” number corresponding to the TV’s analogue channel number from this table. What is “T-V LINK”? ENGLISH  When the Country setting is “France”, select a three-digit CH/CC number. “T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device. By using T-V LINK : CH Channel CH Channel CC Channel CC Channel  CH 02/CH 202 E2, R1 CH 40/CH 240 E40, R40 CC 01/CC 201 S1 CC 31/CC 231 S31 You can send the analogue channel information programmed on the TV to the “T-V LINK” compatible device, CH 03/CH 203 E3, ITALY A CH 41/CH 241 E41, R41 CC 02/CC 202 S2 CC 32/CC 232 S32 so that both the TV and the external device have the same channel settings. When connecting a new external CH 04/CH 204 E4, ITALY B, R2 CH 42/CH 242 E42, R42 CC 03/CC 203 S3 CC 33/CC 233 S33 device, channel information is loaded into it, allowing channel setup to be completed very quickly. For more CH 05/CH 205 E5, ITALY D, R6 CH 43/CH 243 E43, R43 CC 04/CC 204 S4 CC 34/CC 234 S34 details, refer to the external device’s manual. CH 06/CH 206 E6, ITALY E, R7 CH 44/CH 244 E44, R44 CC 05/CC 205 S5 CC 35/CC 235 S35  You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the CH 07/CH 207 E7, ITALY F, R8 CH 45/CH 245 E45, R45 CC 06/CC 206 S6 CC 36/CC 236 S36 “DIRECT REC” feature. For more details, refer to the external device’s manual.

CH 08/CH 208 E8, R9 CH 46/CH 246 E46, R46 CC 07/CC 207 S7 CC 37/CC 237 S37  After timer-record setting, the TV will instruct the recorder to start and stop recording, via “DIRECT REC”. IMPORTANT! CH 09/CH 209 E9, ITALY G CH 47/CH 247 E47, R47 CC 08/CC 208 S8 CC 38/CC 238 S38 CH 10/CH 210 E10, ITALY H, R10 CH 48/CH 248 E48, R48 CC 09/CC 209 S9 CC 39/CC 239 S39 CH 11/CH 211 E11, ITALY H+1, R11 CH 49/CH 249 E49, R49 CC 10/CC 210 S10 CC 40/CC 240 S40 CH 12/CH 212 E12, ITALY H+2, R12 CH 50/CH 250 E50, R50 CC 11/CC 211 S11 CC 41/CC 241 S41 What is “ACI” (Automatic Channel Installation)? CH 21/CH 221 E21, R21 CH 51/CH 251 E51, R51 CC 12/CC 212 S12 CC 75/CC 275 X Some cable companies transmit a signal called “ACI” which contains information that allows analogue channels to CH 22/CH 222 E22, R22 CH 52/CH 252 E52, R52 CC 13/CC 213 S13 CC 76/CC 276 Y, R3 be registered automatically on your TV. CH 23/CH 223 E23, R23 CH 53/CH 253 E53, R53 CC 14/CC 214 S14 CC 77/CC 277 Z, ITALY C, R4 When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen. CH 24/CH 224 E24, R24 CH 54/CH 254 E54, R54 CC 15/CC 215 S15 CC 78/CC 278 Z+1, R5 CH 25/CH 225 E25, R25 CH 55/CH 255 E55, R55 CC 16/CC 216 S16 CC 79/CC 279 Z+2 PREPARE CH 26/CH 226 E26, R26 CH 56/CH 256 E56, R56 CC 17/CC 217 S17 CH 27/CH 227 E27, R27 CH 57/CH 257 E57, R57 CC 18/CC 218 S18 PC Signals that can be displayed CH 28/CH 228 E28, R28 CH 58/CH 258 E58, R58 CC 19/CC 219 S19 *Macintosh* computers are not supported. CH 29/CH 229 E29, R29 CH 59/CH 259 E59, R59 CC 20/CC 220 S20 Resolution 640 x 480 (VGA) 1024 x 768 (XGA) CH 30/CH 230 E30, R30 CH 60/CH 260 E60, R60 CC 21/CC 221 S21 (Macintosh is a registered trademark of CH 31/CH 231 E31, R31 CH 61/CH 261 E61, R61 CC 22/CC 222 S22 Apple Computer, Inc.) Vertical frequency (Hz) 60.0 60.0 CH 32/CH 232 E32, R32 CH 62/CH 262 E62, R62 CC 23/CC 223 S23  If the signal doesn’t appear, check that the vertical CH 33/CH 233 E33, R33 CH 63/CH 263 E63, R63 CC 24/CC 224 S24 frequency on the PC is set to “60Hz”. CH 34/CH 234 E34, R34 CH 64/CH 264 E64, R64 CC 25/CC 225 S25 CH 35/CH 235 E35, R35 CH 65/CH 265 E65, R65 CC 26/CC 226 S26 CH 36/CH 236 E36, R36 CH 66/CH 266 E66, R66 CC 27/CC 227 S27 Connect “DVI” devices CH 37/CH 237 E37, R37 CH 67/CH 267 E67, R67 CC 28/CC 228 S28 CH 38/CH 238 E38, R38 CH 68/CH 268 E68, R68 CC 29/CC 229 S29 Connect a “DVI“ device to “EXT-5 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of

CH 39/CH 239 E39, R39 CH 69/CH 269 E69, R69 CC 30/CC 230 S30 the DVI device to L and R terminals in EXT-4. USE  Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”  (P. 36) CH Channel CH Channel CC Frequency (MHz) CC Frequency (MHz)  EXT-6 input does not support DVI devices. CH 102 F2 CH 141 F41 CC 110 116-124 CC 152 391-399  EXT-6 input does not support analogue sound (EXT-4). CH 103 F3 CH 142 F42 CC 111 124-132 CC 153 399-407 CH 104 F4 CH 143 F43 CC 112 132-140 CC 154 407-415 CH 105 F5 CH 144 F44 CC 113 140-148 CC 155 415-423 Receivable broadcast systems (Analogue channels) CH 106 F6 CH 145 F45 CC 114 148-156 CC 156 423-431 CH 107 F7 CH 146 F46 CC 115 156-164 CC 157 431-439 Depending on the country selected during “Auto Program”, the receivable broadcast system differs. CH 108 F8 CH 147 F47 CC 116 164-172 CC 158 439-447  UNITED KINGDOM: Receive only PAL-I. CH 109 F9 CH 148 F48 CC 123 220-228 CC 159 447-455  FRANCE: Can receive SECAM-L. CH 110 F10 CH 149 F49 CC 124 228-236 CC 160 455-463 To receive SECAM-L in countries other than France: CH 121 F21 CH 150 F50 CC 125 236-244 CC 161 463-469

1) Change the “Country” to “France” in “Auto Program”. SETTINGS CH 122 F22 CH 151 F51 CC 126 244-252 2) Press the “BACK” button to return to the menu and enter the channel using “Insert” or “Manual”. CH 123 F23 CH 152 F52 CC 127 252-260 CH 124 F24 CH 153 F53 CC 128 260-268 CH 125 F25 CH 154 F54 CC 129 268-276 CH 126 F26 CH 155 F55 CC 130 276-284 Power supply for the indoor aerial CH 127 F27 CH 156 F56 CC 131 284-292 When using an indoor aerial which needs external power, set “Antenna power” to “On” during “Initial settings” (P. 11). CH 128 F28 CH 157 F57 CC 132 292-300 The TV will supply DC 5V, 50mA (max) from the aerial socket through the cable to the aerial. CH 129 F29 CH 158 F58 CC 133 300-306  Supplying power to outdoor and indoor aerials which does not need external power, may cause damage to the CH 130 F30 CH 159 F59 CC 141 306-311 aerial. If you are uncertain whether the aerial needs external power, select “Off”. CH 131 F31 CH 160 F60 CC 142 311-319  CH 132 F32 CH 161 F61 CC 143 319-327 Connect the aerial directly to the TV. When a recording device is connected between the aerial and the TV, TROUBLE? CH 133 F33 CH 162 F62 CC 144 327-335 power can not be supplied to the aerial. CH 134 F34 CH 163 F63 CC 145 335-343  Power is supplied to the aerial only when the TV is on. CH 135 F35 CH 164 F64 CC 146 343-351  To change the setting after “Initial settings” is complete  “Antenna power” (P. 43) CH 136 F36 CH 165 F65 CC 147 351-359 CH 137 F37 CH 166 F66 CC 148 359-367 CH 138 F38 CH 167 F67 CC 149 367-375 CH 139 F39 CH 168 F68 CC 150 375-383 CH 140 F40 CH 169 F69 CC 151 383-391 55 56

55-56 6/29/2006 1:16:44 PM Technical information (continued) Speciﬁcations “Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal Main unit ENGLISH Some digital channels are broadcasted with “Dolby Digital” signals. Model LT-32DX7BSP/SSP LT-26DX7BSP/SSP In these cases, “Dolby Digital” signals can be output from the “DIGITAL AUDIO OUT” terminal. Broadcasting systems CCIR I / B / G / D / K / L (See “Technical information”, P. 56) 1. Connect an audio system with a “Dolby Digital” decoder. (P. 10) 2. Change the “Digital Audio Output” setting from “PCM” to “Dolby Digital”. (P. 43) Colour systems TV broadcast : PAL, SECAM  When changing the setting, the message “Dolby Digital selected! No analogue audio available.” may be External input : PAL, SECAM, NTSC 3.58/4.43 MHz displayed for a few seconds.  Digital : E21-E69 (Frequency : 474 MHz-858 MHz)  Each time the channel is changed to a channel that is broadcast with “Dolby Digital” signals, the message  Analogue : “Dolby Digital selected! No analogue audio available.” may be displayed for a few seconds. Channels and frequencies E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2,  R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2, Even if “Dolby Digital” is set, “linear PCM” signals will be output by a channel that is not broadcast with “Dolby IMPORTANT! French cable channels (Frequency : 116-172 MHz / 220-469 MHz) Digital” signals. Set the audio system so that it is compatible with both “Dolby Digital” and “linear PCM”. (For details, refer to Sound-multiplex systems NICAM (I / B / G / D / K / L), A2 (B / G / D / K) the audio system instruction manual.) Teletext systems Digital : EBU TEXT  When you want to temporarily change the setting from “Dolby Digital” to “PCM”, change with the “Audio Analogue : FLOF (Fastext), TOP, WST (World Standard System). selection” menu (P. 29). Power requirements AC 220 V - 240 V, 50/60 Hz  Set “Digital Audio Output” to “PCM” in the following cases. Audio output (Rated power output) 10 W + 10 W The sound of a channel broadcast with “Dolby Digital” signals cannot be heard even when “Dolby Speakers 5.0 cm round x 2

Digital” is set. Power consumption 134 W 120 W PREPARE  When listening with the TV speakers. [standby] [0.6 W] [0.6 W]  When listening with an audio system that does not have a “Dolby Digital” decoder. Screen size  When listening with an audio system that is connected to the “AUDIO OUT” terminal. (visible area size measured diagonally) 80 cm 66 cm  When recording a programme. Dimensions (W x H x D: mm) 800 x 591.6 x 244.2 672 x 517.6 x 244.2  If a language with “(Dolby)” is selected when “(Dolby)” is displayed in the “Audio selection” menu [without stand] [800 x 545 x 133.5] [672 x 471 x 133.5] (P. 29), the “Digital Audio Output” setting can be temporarily changed from “PCM” to “Dolby Weights 18.7 kg 15.5 kg Digital”. [without stand] [16.3 kg] [13.1 kg]  A message recommending you to change the “Digital Audio Output” setting to “Dolby Digital” is displayed for Accessories (See “Check accessories”, P. 6) a few seconds.  A Conditional Access Module for watching pay-TV digital channels can be installed (P.8)  If you want to record a “Dolby Digital” signal using timer-record (P. 27), change the “timer-record  DC power can be supplied to the indoor aerial (P.56)

setting” from “PCM / Analogue” to “Dolby Digital”. However, if the setting is changed to “Dolby USE Digital”, you cannot record analogue sound with a recording device that is connected to the EXT-2 Terminals / Connectors terminal. Terminal name Terminal type Signal type (IN) Signal type (OUT)  “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. EXT-1 Euroconnector x 1 Composite video, S-video, TV out (SCART connector) Analogue RGB, AUDIO L / R Input / Output Dubbing out terminals Euroconnector x 1 Composite video, S-video, (S-VIDEO out is Digital channels that cannot be watched on this TV EXT-2 (SCART connector) Analogue RGB, AUDIO L / R available only for If a digital channel service uses new formats (such as DVB-H or MPEG4, etc.), or MHP, it cannot be digital channels) watched even though the channel name appears. EXT-3 RCA connectors x 3, Composite video, S-video If the channel is selected, the picture will not appear and audio cannot be heard. S-VIDEO connector x 1 AUDIO L / R Analogue component SETTINGS  (576i (625i) / 480i (525i), You can delete these channels by using the “Delete” in the “Edit PR” EXT-4 RCA connectors x 5 Progressive : 576p (625p) / 480p (525p), “Editing digital channels” (P.47) HD : 1080i (1125i), 720p (750p)) Input terminals AUDIO L / R EXT-5 (HDMI-1) HDMI (576i (625i) / 480i (525i) / HDMI connector x 1 576p (625p) / 480p (525p), EXT-6 (HDMI-2) 1080i (1125i), 720p (750p)) PC INPUT D-SUB (15 pins) x 1 Analogue PC signal (P. 56) AUDIO OUT RCA connectors x 2 Audio L / R TROUBLE? DIGITAL Digital audio Output AUDIO OUT OPTICAL connector x1 (48 kHz,16 bit linear terminals PCM / Dolby Digital) Stereo mini-jack x 1 Headphone (3.5 mm in diameter) Headphone output  We may change the design and speciﬁcations without notice. 57 58

57-58 6/29/2006 1:16:45 PM