Optoelectronic Devices and Signal Processing

Total Page:16

File Type:pdf, Size:1020Kb

Optoelectronic Devices and Signal Processing Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing Zur Erlangung des akademischen Grades eines DOKTORS DER INGENIEURWISSENSCHAFTEN (Dr.-Ing.) von der KIT-Fakultät für Elektrotechnik und Informationstechnik des Karlsruher Instituts für Technologie (KIT) angenommene Dissertation von Tobias Harter, M. Sc. geboren in Villingen-Schwenningen, Deutschland Mündliche Prüfung: 28. November 2019 Hauptreferent: Prof. Dr. Christian Koos Korreferenten: Prof. Dr. Dr. h. c. Wolfgang Freude Prof. Dr. Guillermo Carpintero-del-Barrio Table of Contents Kurzfassung ....................................................................................................... v Preface .............................................................................................................. ix Achievements of the present work ................................................................. xi 1 Introduction ................................................................................................. 1 2 THz communications and devices ............................................................. 5 2.1 Fundamentals of T-wave communications ........................................ 6 2.1.1 Baseband and bandpass signals .............................................. 6 2.1.2 Mixer and balanced mixer ...................................................... 9 2.1.3 Digital communications ....................................................... 10 2.1.4 T-wave communication channel .......................................... 12 2.2 T-wave transmitters: State of the art ................................................ 15 2.2.1 Electronic transmitters ......................................................... 16 2.2.2 Optoelectronic transmitters .................................................. 17 2.3 T-wave receivers: State of the art ..................................................... 19 2.3.1 Electronic receivers .............................................................. 19 2.3.2 Optoelectronic receivers ...................................................... 20 2.4 T-wave communications: State of the art ......................................... 21 3 Kramers-Kronig receiver for coherent THz communications ............. 23 3.1 Introduction ...................................................................................... 24 3.2 Future wireless backbone networks ................................................. 25 3.3 Generalized Kramers-Kronig processing ......................................... 26 3.4 Experimental setup and results ......................................................... 30 3.5 Summary........................................................................................... 36 4 Wireless THz link with optoelectronic transmitter and receiver ......... 39 4.1 Introduction and background ........................................................... 40 4.2 Implementation of optoelectronic receiver ...................................... 43 4.3 Demonstration of wireless T-wave links .......................................... 45 4.3.1 Single-channel transmission and wideband tunability ......... 46 4.3.2 Multi-channel transmission .................................................. 50 i Table of Contents 4.3.3 Potential for further improvements ...................................... 52 4.4 Summary........................................................................................... 54 5 Silicon-plasmonic integrated circuits for THz signal generation and coherent detection .............................................................................. 55 5.1 Introduction ...................................................................................... 56 5.2 Silicon-plasmonic T-wave systems .................................................. 58 5.3 PIPED for optoelectronic T-wave processing .................................. 60 5.4 Demonstration of T-wave generation and detection ........................ 65 5.5 Monolithically integrated T-wave system ........................................ 72 5.6 Summary and outlook ...................................................................... 74 6 Summary and Outlook ............................................................................. 77 6.1 Summary........................................................................................... 77 6.2 Outlook and future work .................................................................. 78 Appendices ....................................................................................................... 81 A. Important antenna parameters ............................................................... 83 A.1 Aperture of an isotropic antenna ...................................................... 84 A.2 Free-space path loss .......................................................................... 85 B. Photodiode implementations .................................................................... 86 C. Kramers-Kronig receiver ......................................................................... 89 C.1 Methods ............................................................................................ 89 C.2 Experimental setup ........................................................................... 95 C.3 Model of the Schottky-barrier diode receiver .................................. 97 C.4 Characterization of SBD receiver .................................................. 100 C.5 THz link budget and noise analysis................................................ 104 C.6 Spectral broadening by non-quadratic SBD characteristics ........... 107 C.7 Oversampling requirements in the DSP ......................................... 108 C.8 32QAM measurements ................................................................... 112 C.9 Comparison of generalized Kramers-Kronig pro-cessing and heterodyne detection with guard band ........................................... 113 C.10 Comparison of EVM for QPSK and 16QAM ................................ 115 C.11 Outdoor performance ..................................................................... 116 C.12 Comparison of phase retrieval algorithms ..................................... 117 ii Table of Contents D. Optoelectronic THz receiver .................................................................. 121 D.1 Mathematical model ....................................................................... 121 D.2 T-wave receiver .............................................................................. 123 D.3 Wireless T-wave communication link ........................................... 129 D.4 T-wave amplifiers and UTC-PD .................................................... 134 D.5 Link budget and noise analysis ...................................................... 138 E. Silicon-plasmonic integrated circuits .................................................... 143 E.1 Methods .......................................................................................... 143 E.2 Detailed derivation of formulae ..................................................... 149 E.3 Calibration of T-wave Tx and Rx reference .................................. 152 E.4 Antenna-coupled Tx and Rx .......................................................... 153 E.5 T-wave Rx ...................................................................................... 154 E.6 Damage threshold ........................................................................... 156 E.7 Operating conditions of Rx ............................................................ 157 E.8 Equivalent-circuit of T-wave systems ............................................ 158 E.9 Equivalent-circuit frequency roll-off ............................................. 166 E.10 Simulation of frequency-dependent radiated Tx power ................. 168 E.11 Electric field distribution of integrated T-wave system ................. 170 E.12 Conversion from S-parameters to Z-parameters ............................ 171 E.13 Performance improvement ............................................................. 172 F. Bibliography ............................................................................................ 174 G. Glossary .................................................................................................... 191 G.1 List of abbreviations ....................................................................... 191 G.2 List of mathematical symbols ........................................................ 195 Greek symbols .......................................................................................... 195 Latin symbols ............................................................................................ 195 Danksagung ................................................................................................... 199 List of publications ....................................................................................... 202 Journal publications .................................................................................. 202 Conference publications ............................................................................ 203 iii Kurzfassung Telekommunikation ist ein Grundpfeiler der heutigen Informationsgesellschaft und hat signifikanten Einfluss auf alle Bereiche des sozialen Lebens. Der stetig ansteigende Bedarf an Vernetzung erfordert eine digitale Infrastruktur, mit welcher hohe Übertragungsraten erzielt werden können. Durch die Verwendung von Lichtwellenleitern können
Recommended publications
  • 60 Ghz Wireless Link Implementing an Electronic Mixer Driven by a Photonically Integrated Uni- Traveling Carrier Photodiode at the Receiver
    60 GHz Wireless Link Implementing an Electronic Mixer Driven by a Photonically Integrated Uni- Traveling Carrier Photodiode at the Receiver Ahmad W. Mohammad1, Katarzyna Balakier1, Haymen Shams1, Frédéric van Dijk2, Chin-Pang Liu1, Chris Graham1, Michele Natrella1, Xiaoli Lin1, Alwyn J. Seeds1, and Cyril C. Renaud1 1Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE, UK 2III-V Lab, a joint Laboratory of "Nokia Bell Labs", "Thales Research & Technology" and "CEA-LETI", Palaiseau, France Abstract— We report the first 60 GHz wireless link emitted power and the large bandwidth [7]. However, the UTC- implementing a uni-traveling carrier photodiode (UTC-PD) at PD exhibits a poor performance as an optoelectronic mixer the transmitter and a photonic integrated chip incorporating a because of its significant frequency conversion loss; a UTC-PD at the receiver. In this demonstration, a 64.5 GHz signal conversion loss of 32 dB at 100 GHz has been demonstrated carrying 1 Gbps on-off keying (OOK) data was generated by using this type of photodiode [8]. On the other hand, Schottky- heterodyning two optical tones into the transmitter UTC-PD. The based electronic mixers have demonstrated less than 5 dB signal was transmitted using a 24 dBi gain parabolic antenna conversion loss at 180 GHz [9]. However, a Schottky-based over a wireless distance of three metres before reaching an mixer requires a high frequency electronic local oscillator identical receiver antenna. At the receiver, an electronic mixer (LO), which can be expensive and may restrict frequency was used to down-convert the received signal into an agility of the receiver, while a UTC-PD mixer is widely intermediate frequency of 12.5 GHz.
    [Show full text]
  • RTT TECHNOLOGY TOPIC January 2015 Defence Spectrum – the New Battleground?
    RTT TECHNOLOGY TOPIC January 2015 Defence Spectrum – the new battleground? In this month’s technology topic we look at contemporary military radio developments, the integration of LTE user devices into defence communication systems, the relevance of military research to 5 G deployment efficiency and related spectral utilisation and regulatory issues. Defence communication systems are deployed across the whole radio spectrum from long wave to light. This includes mobile communication systems at VHF and UHF and L Band and S band, LEO, MEO and GSO satellite systems (VHF to E band) and mobile and fixed radar (VHF to E band). Legacy defence systems are being upgraded to provide additional functionality. This requires more rather than less spectrum. Increased radar resolution requires wider channel bandwidths; longer range requires more power and improved sensitivity. Improved sensitivity increases the risk of inter system interference. Emerging application requirements including unmanned aerial vehicles require a mix of additional terrestrial, satellite and radar bandwidth. These requirements are geographically and spectrally diverse rather than battlefield and spectrally specific. The assumption in many markets is that the defence industry will be willing and able to surrender spectrum for mobile broadband consumer and civilian use. The AWS 3 auction in the US is a contemporary example with a $5 billion transition budget to cover legacy military system decommissioning in the DOD coordination zone between 1755 and 1780 MHz This transition strategy assumes an increased use of LTE network hardware and user hardware in battlefield systems. While this might imply an opportunity for closer coordination and cooperation between the mobile broadband and defence community it seems likely that an increase in the amount of defence bandwidth needed to support a broadening range of RF dependent systems could be a problematic component in the global spectral allocation and auction process.
    [Show full text]
  • Ncar S-Pol Second Frequency (K -Band) Radar
    P12R.6 NCAR S-POL SECOND FREQUENCY (KA-BAND) RADAR Gordon Farquharson,∗ Frank Pratte, Milan Pipersky, Don Ferraro, Alan Phinney, Eric Loew, Robert Rilling, Scott Ellis, and Jothiram Vivekanandan National Center for Atmospheric Research, Boulder, Colorado 1. INTRODUCTION The National Center for Atmospheric Research (NCAR) has recently extended the observational capability of the S-band dual-polarimetric weather radar system (S-Pol, Keeler et al. (2000)) by adding a Ka-band (35 GHz) po- larimetric Doppler radar (Vivekanandan et al., 2004). The Transmitter Ka-band radar employs a dual channel receiver and can be configured for either HH and HV, or HH and VV polari- metric measurements. The Ka-band and S-band antenna beams are matched and aligned, and timing signals for both systems are generated from the Global Position Sys- tem (GPS) ensuring that a common resolution volume is sampled by both systems. This dual-wavelength capabil- ity provides the potential for retrieving water vapor profiles Radar Processor (Ellis et al., 2005) and liquid water content in Rayleigh scattering conditions (Vivekanandan et al., 1999), im- proving remote sensing of various precipitation types, and studies on cloud microphysics. 2. RADAR DESCRIPTION Receiver The K -band radar is housed in three enclosures which a Figure 1: K -band radar attached to the S-band dish. The are mounted to the S-Pol S-band dish and pedestal struc- a transmitter, receiver, and processor enclosures are vis- ture (Figure 1); these include the transmitter enclosure, ible. The K -band antenna is mounted to the receiver the receiver enclosure, and the radar processor enclo- a enclosure and is facing away from the viewer in the pho- sure.
    [Show full text]
  • Spectrum and the Technological Transformation of the Satellite Industry Prepared by Strand Consulting on Behalf of the Satellite Industry Association1
    Spectrum & the Technological Transformation of the Satellite Industry Spectrum and the Technological Transformation of the Satellite Industry Prepared by Strand Consulting on behalf of the Satellite Industry Association1 1 AT&T, a member of SIA, does not necessarily endorse all conclusions of this study. Page 1 of 75 Spectrum & the Technological Transformation of the Satellite Industry 1. Table of Contents 1. Table of Contents ................................................................................................ 1 2. Executive Summary ............................................................................................. 4 2.1. What the satellite industry does for the U.S. today ............................................... 4 2.2. What the satellite industry offers going forward ................................................... 4 2.3. Innovation in the satellite industry ........................................................................ 5 3. Introduction ......................................................................................................... 7 3.1. Overview .................................................................................................................. 7 3.2. Spectrum Basics ...................................................................................................... 8 3.3. Satellite Industry Segments .................................................................................... 9 3.3.1. Satellite Communications ..............................................................................
    [Show full text]
  • Remote, Displacement Measurement Using A
    REMOTE, DISPLACEMENT MEASUREMENT USING A MODULATED LASER SYSTEM by G. M. S. JOYNES A thesis submitted for the Degree of Doctor of Philosophy at the University of Surrey August 1973 ProQuest Number: 10800195 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a com plete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. uest ProQuest 10800195 Published by ProQuest LLC(2018). Copyright of the Dissertation is held by the Author. All rights reserved. This work is protected against unauthorized copying under Title 17, United States C ode Microform Edition © ProQuest LLC. ProQuest LLC. 789 East Eisenhower Parkway P.O. Box 1346 Ann Arbor, Ml 48106- 1346 ABSTRACT A study has been made of the principles involved in displacement measurement using optical methods, with particular emphasis on intensity - modulated laser beam techniques. Some of the compromises in performance possible in differing situations are discussed. Previous research has dealt with an approach using coherent optical interference. The two methods are compared theoretically, and it is shown that certain advantages are possessed by the Modulated Beam technique. An important component in the system discussed is the Intensity Modulator. Methods of electro-optic modulation have been studied, and a modulator using Lithium. Niobate has been designed and built. It requires low modulation voltages, operates in the v.h.f. region, and has the important advantage over similar modulators in that it is completely insensitive to temperature.
    [Show full text]
  • Current Times Ent Times
    Bhilai Institute of Technology, Durg CURRENT TIMES Power of Technology The In-house Quarterly News letter of Electrical Engineering Department Chief Patron July 2017 Sh. I.P.Mishra Patron Vision Mission Dr Arun Arora Advisor To create intellectually stimulating environment To contribute to the nation, by for learning, research and promotion of Advisory Board delivering quality education and professional and ethical values, to develop a creating globally competent sense of responsibility, discipline and interest Dr (Mrs) A.P.Huddar professionals to serve the industry amongst students in various activities leading to Dr (Mrs ) S.Ray and society. the welfare of the industry and society at large Dr S.P.Shukla and to empower the students through lifelong Dr S.K.Sahu learning for self up-gradation and societal Dr (Mrs) A. Gupta upliftment. Dr (Mrs) S.Tripathi Dr G.C.Biswal Prof. Uma P. Balaraju Program Educational Objectives (PEOs) Prof.Gourav Sharma PEO-1 To impart sound foundation in Mathematics, Applied Science and Engineering Prof. Alok Kumar to the graduates, which enables them to formulate, solve and analyze the problems in Prof. J.Panigrahi Electrical Engineering. Prof. Shraddha PEO-2 To develop analyzing skill amongst graduates for technical interpretation, Kaushik designing and implementation of ideas. Prof. G.Shankar PEO-3 To promote students for taking up new responsibilities and challenges in Prof. Jyotsana Kaiwart multidisciplinary projects. Editor Dr N.Tripathi Editorial Dear Readers, Student Editor Nitish Patel Warm welcome to new edition of “Current Times”. India has taken steps towards goods Akanksha Hota and service taxes replacing several existing taxes.
    [Show full text]
  • X-Band Tt&C and K-Band Downlink Antennas For
    X-BAND TT&C AND K-BAND DOWNLINK ANTENNAS FOR FUTURE LEO MISSIONS Martin Wenåker [email protected] RUAG Space AB Jan Zackrisson [email protected] Hans Ekström [email protected] Gothenburg, Sweden Johan Petersson [email protected] Patrik Dimming [email protected] P-1342182-RSE Presentation Outline . Introduction . Design Background and Heritage . X-Band TT&C Antenna . K-/Ka-Band Beacon/DDL Antenna . Conclusion 2/17 | X-BAND TT&C AND K-BAND DOWNLINK ANTENNAS FOR FUTURE LEO MISSIONS | RUAG Space | January 22, 2020 Introduction . X-Band TT&C antenna . K-/Ka-Band Beacon/DDL Antenna − Designed and manufactured as an EM − Pre-development running in parallel activity in an add-on to the original with the X-Band continuing study study − Novel dual band design 3/17 | X-BAND TT&C AND K-BAND DOWNLINK ANTENNAS FOR FUTURE LEO MISSIONS | RUAG Space | January 22, 2020 Design Background and Heritage – Ruag Space . Ruag space antenna activities started in the mid 70’s within wide coverage antennas > 300 helix antennas delivered . Other types of antennas are also designed and developed − Reflector antennas (JWST, SIRAL/Cryosat) − Array antennas (Array elements for telecom) − Slot antennas (ERS1/ERS2 , MetOp SG Scatterometer) 4/17 | X-BAND TT&C AND K-BAND DOWNLINK ANTENNAS FOR FUTURE LEO MISSIONS | RUAG Space | January 22, 2020 Design Background and Heritage – Ruag Space . Several variants are used for our helix antennas . Three main variants − Wires - shaped to a helix radiator − Etched metallic strips on substrates - shaped to a helix radiator − Machined in one piece of metal - shaped to a helix radiator 5/17 | X-BAND TT&C AND K-BAND DOWNLINK ANTENNAS FOR FUTURE LEO MISSIONS | RUAG Space | January 22, 2020 X-Band TT&C Antenna .
    [Show full text]
  • Optoelectronic Devices and Signal Processing
    Karlsruhe Series in Photonics & Communications, Vol. 24 Tobias Harter Wireless THz Communications: Optoelectronic Devices and Signal Processing Tobias Harter Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing Karlsruhe Series in Photonics & Communications, Vol. 24 Edited by Profs. C. Koos, W. Freude and S. Randel Karlsruhe Institute of Technology (KIT) Institute of Photonics and Quantum Electronics (IPQ) Germany Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing by Tobias Harter Karlsruher Institut für Technologie Institut für Photonik und Quantenelektronik Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing Zur Erlangung des akademischen Grades eines Doktor-Ingenieurs von der KIT-Fakultät für Elektrotechnik und Informationstechnik des Karlsruher Instituts für Technologie (KIT) genehmigte Dissertation von Tobias Harter, M.Sc. Mündliche Prüfung: 28. November 2019 Hauptreferent: Prof. Dr. Christian Koos Korreferenten: Prof. Dr. Dr. h. c. Wolfgang Freude Prof. Dr. Guillermo Carpintero-del-Barrio Impressum Karlsruher Institut für Technologie (KIT) KIT Scientific Publishing Straße am Forum 2 D-76131 Karlsruhe KIT Scientific Publishing is a registered trademark of Karlsruhe Institute of Technology. Reprint using the book cover is not allowed. www.ksp.kit.edu This document – excluding the chapters 3 to 5, C to E, the cover, pictures and graphs – is licensed under a Creative Commons Attribution-Share Alike 4.0 International License (CC BY-SA 4.0): https://creativecommons.org/licenses/by-sa/4.0/deed.en The cover page is licensed under a Creative Commons Attribution-No Derivatives 4.0 International License (CC BY-ND 4.0): https://creativecommons.org/licenses/by-nd/4.0/deed.en Print on Demand 2021 – Gedruckt auf FSC-zertifiziertem Papier ISSN 1865-1100 ISBN 978-3-7315-1083-3 DOI 10.5445/KSP/1000128941 Table of Contents Kurzfassung ......................................................................................................
    [Show full text]
  • 5 Gbps Wireless Transmission Link with an Optically Pumped Uni-Traveling Carrier Photodiode Mixer at the Receiver
    Vol. 26, No. 3 | 5 Feb 2018 | OPTICS EXPRESS 2884 5 Gbps wireless transmission link with an optically pumped uni-traveling carrier photodiode mixer at the receiver AHMAD W. MOHAMMAD,* HAYMEN SHAMS, KATARZYNA BALAKIER, CHRIS GRAHAM, MICHELE NATRELLA, ALWYN J. SEEDS, AND CYRIL C. RENAUD Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE, UK *[email protected] Abstract: We report the first demonstration of a uni-traveling carrier photodiode (UTC-PD) used as a 5 Gbps wireless receiver. In this experiment, a 35.1 GHz carrier was electrically modulated with 5 Gbps non-return with zero on-off keying (NRZ–OOK) data and transmitted wirelessly over a distance of 1.3 m. At the receiver, a UTC-PD was used as an optically pumped mixer (OPM) to down-convert the received radio frequency (RF) signal to an intermediate frequency (IF) of 11.7 GHz, before it was down-converted to the baseband using an electronic mixer. The recovered data show a clear eye diagram, and a bit error rate (BER) of less than 10−8 was measured. The conversion loss of the UTC-PD optoelectronic mixer has been measured at 22 dB. The frequency of the local oscillator (LO) used for the UTC-PD is defined by the frequency spacing between the two optical tones, which can be broadly tuneable offering the frequency agility of this photodiode-based receiver. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.
    [Show full text]
  • HBT, Mixer, Opto-Electronic, Nearly Gaussian Doping Profile, Linear Grading Composition, Current Gain, Base Transit Time
    Electrical and Electronic Engineering 2016, 6(2): 30-38 DOI: 10.5923/j.eee.20160602.03 Conversion Gain Improvement of InP/InGaAs HBT Opto-Electronic Mixer Using Nearly Gaussian Doping Profile and Linear Grading of Composition in Base Region Hassan Kaatuzian, Keyvan Farhang Razi* Photonics Research Laboratory (P.R.L), Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran Abstract Conversion gain improvement of an integrated opto-electronic mixer consisting of InP/InGaAs heterojunction bipolar transistors(HBTs) in single and cascode configuration is estimated in this paper. The effects of two methods are analyzed for this purpose. Two important factors for determining the performance of a transistor are base transit time ( ) and current gain( ). In first method, the uniform base doping profile is modified to nearly Gaussian base doping profile and by this modification base transit time is decreased and current gain is increased from 130 to 306. In second method, linear grading of compositionβ of the base is proposed to enhance current gain and decrease base transit time. In second method current gain is increased from 130 to 292. Another important factor for determining performances of a transistor is base width. By decreasing base width up to 250 A, current gain can be increased up to 614 and 553 in first and second methods respectively. The dependence of diffusion constant, doping concentration and temperature is considered in the first method. The modified transistors are inserted in the structure of single and cascode Opto-Electronic mixers and after software simulation, considerable improvement of up and down conversion gains of mixer are obtained.
    [Show full text]
  • Modulation Locking Subsystems for Gravitational Wave Detectors
    Modulation Locking Subsystems for Gravitational Wave Detectors Benedict John Cusack September 2004 Thesis submitted for the degree of Master of Philosophy at the Australian National University Declaration I certify that the work contained in this thesis is, to the best of my knowledge, my own original research. All material taken from other references is explicitly acknowledged as such. I certify that the work contained in this thesis has not been submitted for any other degree. Benedict Cusack September, 2004 The Road Not Taken Two roads diverged in a yellow wood, And sorry I could not travel both And be one traveller, long I stood And looked down one as far as I could To where it bent in the undergrowth; Then took the other, as just as fair, And having perhaps the better claim, Because it was grassy and wanted wear; Though as for that the passing there Had worn them really about the same, And both that morning equally lay In leaves no step had trodden black. Oh, I kept the first for another day! Yet knowing how way leads on to way, I doubted if I should ever come back. I shall be telling this with a sigh Somewhere ages and ages hence; Two roads diverged in a wood, and I — I took the one less travelled by, And that has made all the difference. Robert Frost, 1920. Acknowledgements I don’t think I ever doubted that this document would one day come into existence, it is more that I couldn’t see for a long time what would fill it.
    [Show full text]
  • Geometric Distances of Quasars Measured by Spectroastrometry and Reverberation Mapping: Monte Carlo Simulations
    DRAFT VERSION MARCH 2, 2021 Typeset using LATEX default style in AASTeX62 Geometric Distances of Quasars Measured by Spectroastrometry and Reverberation Mapping: Monte Carlo Simulations YU-YANG SONGSHENG,1, 2 YAN-RONG LI,1 PU DU,1 AND JIAN-MIN WANG1, 2, 3 1Key Laboratory for Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, 19B Yuquan Road, Beijing 100049, China 2University of Chinese Academy of Sciences, 19A Yuquan Road, Beijing 100049, China 3National Astronomical Observatories of China, Chinese Academy of Sciences, 20A Datun Road, Beijing 100020, China (Received ***; Revised ***; Accepted ***) ABSTRACT Recently, GRAVITY onboard the Very Large Telescope Interferometer (VLTI) first spatially resolved the structure of the quasar 3C 273 with an unprecedented resolution of 10µas. A new method of measuring ∼ parallax distances has been successfully applied to the quasar through joint analysis of spectroastrometry (SA) and reverberation mapping (RM) observation of its broad line region (BLR). The uncertainty of this SA and RM (SARM) measurement is about 16% from real data, showing its great potential as a powerful tool for precision cosmology. In this paper, we carry out detailed analyses of mock data to study impacts of data qualities of SA observations on distance measurements and establish a quantitative relationship between statistical uncertainties of distances and relative errors of differential phases. We employ a circular disk model of BLR for the SARM analysis. We show that SARM analyses of observations generally generate reliable quasar distances, even for relatively poor SA measurements with error bars of 40% at peaks of phases. Inclinations and opening angles of ◦ BLRs are the major parameters governing distance uncertainties.
    [Show full text]