™ 18i

SEMI-AUTOMATIC SHOTGUN

OWNER’S MANUAL INTRODUCTION

Thank you for buying a Weatherby® firearm and welcome to the family. We realize that you had many products to choose from and hope you feel as we do that you purchased the finest quality production firearm on the market today.

When my late grandfather started this company in 1945, it was as a means to turn his revolutionary vision of rifle design and cartridge performance into practical realities.

At the time, I’m sure he had little idea that Weatherby® would come to be one of the most respected and revered brands in the firearms industry. We appreciate this level of respect and you have our assurance it will not be taken for granted.

This Owner’s Manual is designed to assist you in learning how to safely use and care for your Weatherby® 18i Semi-automatic shotgun Please read the entire contents thoroughly and carefully follow all instructions and safety warnings.

In closing, let me assure you that we are committed to the hunter, shooter and sports- man; and delivering the uncompromising craftsmanship, performance and value that you require in all that we do.

Good Shooting! INTRODUCTION - SAFETY - FIRST AND FOREMOST

FIREARMS ARE DANGEROUS WEAPONS, WHICH CAN CAUSE SERIOUS INJURY OR DEATH. WHEN USING ANY FIREARM, SAFETY MUST BE YOUR FIRST AND CONSTANT CONCERN.

FAILURE TO FOLLOW ANY OF THE WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL COULD RESULT IN SERIOUS INJURY OR DEATH.

READ AND UNDERSTAND THE FOLLOWING SAFETY RULES

KNOW YOUR FIREARM. Before assembling or using your Weatherby® 18i Semi-Automatic Shotgun, be sure to read and understand all instructions and safety warnings contained in this Owner’s Manual in order to learn how to use the firearm safely and correctly.

ALWAYS TREAT YOUR FIREARM AS IF IT WERE LOADED. Use the manual safety lever as outlined in this manual. Never move the safety to the “FIRE” position until YOU are ready to fire.

ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. The safe direction may be “up” on some occasions, and “down” on others. Never point the muzzle toward anything not intended as a target.

USE ONLY THE CORRECT AMMUNITION FOR YOUR FIREARM. Be sure to use only the correct ammunition for your Weatherby® 18i Semi-automatic shotgun as stamped on the side of the barrel.

ALWAYS UNLOAD YOUR FIREARM WHEN NOT SHOOTING. Never transport or store a loaded firearm in a vehicle or building. Unload your firearm before climbing a tree, fence or other ob- struction, or when entering a slippery area.

MAINTAIN YOUR FIREARM. Keep the barrel clean and free of obstructions. Clean your firearm regularly and have it inspected periodically to make sure it is mechanically correct and function- ing properly. Worn or damaged parts can be dangerous.

DO NOT MAKE UNAUTHORIZED ADJUSTMENTS. Never make alterations to your firearm. Use only Weatherby® parts. Do not make any changes to the shape or size of the sear or other parts. Repair should be performed by a Weatherby® Authorized Service Center.

STORE YOUR FIREARM AND AMMUNITION SEPARATELY , WELL BEYOND THE REACH OF CHILDREN. Always take appropriate measures to ensure your firearm is not accessible to chil- dren or others who are untrained or inexperienced in its safe handling.

MAKE YOURSELF SAFE. Always wear shooting glasses and use ear protection when shooting or attending shooting events. Never drink alcoholic beverages before or during shooting.

REMEMBER - FIREARMS SAFETY DEPENDS ON YOU!!

3 INDEX

• Introduction Page 2

• Safety - First and Foremost Page 3

• Index Page 4-5

• General Overview Page 6

• Initial Assembly Instructions Page 7 · Barrel to Receiver Mounting Page 7 · Forend Mounting Page 7 · Manual Trigger Safety Page 8 · Ammunition Page 9

• Operating Instructions Page 10 · Opening the Bolt Page 10 · Checking for and Clearing Bore Obstructions Page 10 · To Check the Barrel for Obstructions Page 11 · Clearing a Bore Obstruction Page 11 · Closing the Bolt Page 11 · Loading the Shotgun Page 12 · To Feed a Shell from the Magazine into the Chamber Page 13 · To Single-load the Chamber without Shells in the Magazine Page 13 · To Single-load the Chamber with Shells in the Magazine Page 13 · Firing the Shotgun Page 14 · Unloading the Shotgun Page 14

• Multi-Choke™ Tubes Page 15 · Removing Choke Tubes Page 16 · Installing Choke Tubes Page 17 · Tightening Choke Tubes Page 17 Choke Value Chart Page 18

• Adjustment and Options Page 19 · Changing the Drop Page 19 · Installation of Length of Pull Spacers and Drop and Cast Shims Page 19 · Installing Length of Pull Spacers Page 19 · Installing Drop and Cast Shims Page 19 · Magazine Limiter Plug Removal Page 21

• Cleaning and Maintaining Your Weatherby® Semi-Auto Shotgun Page 22 · Cleaning the Bore Page 23 · Cleaning the Outside of the Barrel Page 23 · Cleaning Choke Tubes Page 23 · Cleaning the Action Page 24 · Cleaning the Action Page 24

4 INDEX

· Cleaning the Magazine Page 24 · Cleaning the Forend and Buttstock Page 24 · Rust Prevention and Removal Page 24

• Disassembly Instructions Page 25 · Removing the Forend Page 25 · Removing the Barrel Page 25 · Trigger Group Removal Page 25 · Removing the Bolt Assembly Page 26

• Assembly of Weatherby® Semi-Auto Shotgun Page 26 · Trigger Group Installation Page 26 · Installing the Bolt Assembly Page 26 · Installing the Barrel and Forend Page 26

• Suggestions for Getting Top Performance from Your Weatherby® Semi-Auto Shotgun Page 27

• Storing Your Shotgun Page 27

• Exploded View Diagram 12 Ga. 3.5” (general assembly) Page 28 · Parts Listing Page 29 • Exploded View Diagram 12 Ga. 3.5” (bolt assembly) Page 30 · Parts Listing Page 31 • Exploded View Diagram 12 Ga. 3.5” (trigger assembly) Page 32 · Parts Listing Page 33

• Exploded View Diagram 12 Ga. 3” (general assembly) Page 34 · Parts Listing Page 35 • Exploded View Diagram 12 Ga. 3” (bolt assembly) Page 36 · Parts Listing Page 37 • Exploded View Diagram 12 Ga. 3” (trigger assembly) Page 38 · Parts Listing Page 39

• Exploded View Diagram 20 Ga. 3” (general assembly) Page 40 · Parts Listing Page 41 • Exploded View Diagram 20 Ga. 3” (bolt assembly) Page 42 · Parts Listing Page 43 • Exploded View Diagram 20 Ga. 3” (trigger assembly) Page 44 · Parts Listing Page 45

• Weatherby® Service Policy Page 46

• Ten Commandments of Firearms Safety Page 46

• Exercise Extreme Caution Page 47

5 WEATHERBY® 18i TM SEMI-AUTOMATIC SHOTGUN

Read this manual carefully before assembling or handling your Weatherby®18i™ shotgun. It provides important information for assembling, using and caring for your shotgun. Keep this manual and consult it as needed. If you sell or transfer your shotgun, make sure this manual stays with it.

If you have any questions or concerns about the assembly or operation of your shot- gun, ask your dealer or a qualified gunsmith.

Before handling any firearm, get instruction from a competent firearms instructor.

GENERAL OVERVIEW The following illustration identifies the basic parts of your Weatherby® 18i™ shotgun.

THIS MANUAL APPLIES TO ALL 18i™ MODELS AND ACTION SIZES: 1. 20 ga. 3” 2. 12 ga. 2-3/4” & 3” 3. 12 ga. 3.5”

1 2 6 7

3 4 5 8 9 10 11 12

1) Recoil Pad 8) Bolt Release 15) Barrel Extension 2) Butt Stock 9) Magazine Tube 3) Manual Trigger Safety 10) Forend 4) Trigger Group 11) Magazine Cap 5) Shell Release Button 12) Barrel 6) Bolt 13) Choke Tube 7) Bolt Handle 14) Choke Tube (Maxi 90)

13 14 15

6 INITIAL ASSEMBLY INSTRUCTIONS

Before starting check that the chamber and magazine are unloaded and without obstruction. INSTALLING THE BARREL TO THE RECEIVER 1) Inspect barrel to make sure there are no bore obstructions, and that it is free of excess lubricant. NOTE: NEVER RELEASE THE BOLT WITHOUT THE BARREL FITTED TO THE RECEIVER. 2) Remove the magazine cap (Ref. to Fig. 1) by turning it counter clockwise. 3) Slide the forend off the magazine tube. 4) Open the bolt by pressing the Shell Release Button and 12 Ga 20 Ga sliding the bolt back (Refer to Fig. 2) 5) 12 Ga: Mount the forearm by sliding the barrel ring forward onto th barrel tube and seating it against the retaining ring. You Fig. 2 will hear a click when it is fully seated. (Ref. to Fig. ) 20 Ga: Mount the forearm by carefully the barrel ring rearward over the magazine tube and seating the forend aganst the retaining ring. (Ref. to Fig. 2 ) 6) Insert the barrel into the receiver by sliding the barrel into the action until the barrel is fully seated against the receiver. Fig. 3

7) Screw the magazine cap (Ref. to Fig. 2) onto the threaded front of the magazine tube until it is finger-tight, making sure that the barrel is firmly seated against the receiver.

8) Keeping your fingers away from the trigger and out of the receiver loading port, close the bolt by pressing the bolt release button.

Fig. 5 Fig. 4

NOTE: After each few firings of the shotgun, check to make sure the barrel is still firmly seated against the receiver, and that the magazine cap is still tight.

7 MANUAL TRIGGER SAFETY

•NEVER DEPEND ON ANY MECHANICAL SAFETY MECHANISM OR DEVICE TO PREVENT THE DANGERS OF CARELESS HANDLING OR POINTING A FIREARM IN AN UNSAFE DIRECTION. UNSAFE HANDLING CAN RESULT IN SERIOUS INJURY OR DEATH. •WHEN MANIPULATING THE MANUAL SAFETY, KEEP ALL FINGERS OUTSIDE THE TRIGGER GUARD. THE SHOTGUN WILL FIRE IF THE TRIGGER IS PULLED WHEN THE SAFETY IS NOT IN THE “SAFE” POSITION. •THE SAFETY SHOULD ALWAYS BE IN THE “SAFE” POSITION EXCEPT WHEN THE SHOTGUN IS INTENDED TO BE FIRED. NEVER PULL THE TRIGGER WHEN THE SAFETY IS IN THE “SAFE” POSITION.

MANUAL TRIGGER SAFETY LOCATION The manual safety on your Weatherby® 18i™ shotgun is a button-type manual trigger safety located at the top rear of the trigger guard. When in proper condition and correctly engaged in the “SAFE” position, the manual safety blocks the trigger to avoid accidental discharge under normal conditions and usage.

MANUAL TRIGGER SAFETY OPERATION To place the manual trigger safety in the “ON” or “SAFE” position, press the manual trig- ger safety button from the left side of the trigger guard until it protrudes on the right side of the trigger guard. (Ref. to Fig. 6) To place the manual trigger safety in the “OFF” or “READY TO FIRE” position, press the manual trigger safety button from the right side of the trigger guard until it protrudes on the left side of the trigger guard (Ref. to Fig. 7) When the manual trigger safety is in the “OFF” or “READY TO FIRE” position, a red band will be visible around the safety button on the left side of the trigger guard. (Ref. to Fig. 7)

Fig. 6 Fig. 7

8 AMMUNITION

Your Weatherby® 18i™ is designed to accept specific shell sizes as marked on the bar- rel. Refer to the barrel of your Weatherby® 18i™ to determine acceptable shell sizes. A 3” action is capable of accepting 2-3/4” and 3” shells. A 3.5” Super Magnum action is capable of accepting up to 3.5” shells.

All Weatherby® 18i™ shotguns are designed to be used with maxiumum shot loads not to exceed 2 oz.

•THE ACCIDENTAL OR INTENTIONAL USE OF INCORRECT OR OVERLOADED AMMUNITION CAN RESULT IN DEATH OR SERIOUS INJURY AND DAMAGE TO YOUR FIREARM DUE TO EXCESSIVE PRESSURE. EVEN THE STRONGEST FIREARM CAN BE “BLOWN UP” BY EXCESSIVE PRESSURE. USE ONLY FACTORY-LOADED AMMUNITION OF THE CORRECT GAUGE AND LENGTH FOR YOUR SHOTGUN AS MARKED ON THE SHOTGUN’S BARREL. •CARRY ONLY THE AMMUNITION OF THE PROPER GAUGE, LENGTH AND TYPE FOR YOUR SHOTGUN WITH YOU WHEN SHOOTING. A 20 GA. SHELL WILL ENTER A 12 GA. CHAMBER FAR ENOUGH TO LEAVE ROOM FOR A 12 GA. SHELL BEHIND IT. SIGNIFICANT DAMAGE TO THE GUN AND POSSIBLE INJURY TO THE SHOOTER WILL RESULT IF THE GUN IS FIRED. ALSO, A 3 ½” SHELL WILL CHAMBER INTO A 3” CHAMBER, BUT THE CRIMP WILL UNFOLD INTO THE FORCING CONE, CAUSING POSSIBLE UNSAFE PRESSURES.

Exercise care to assure that you are using only the correct ammunition for your shot- gun. Always make certain that the gauge indicated on the factory loaded shot shell headstamp matches the gauge marked on the barrel of your shotgun. Never store shells of mixed gauges, lengths or types in a common container or in your pockets. Examine every shell you put into your shotgun. Always wear shooting glasses and hearing protectors when shooting.

WEATHERBY, INC. SPECIFICALLY DISCLAIMS RESPONSIBILITY FOR ANY INJURY OR DAMAGE WHATSOEVER OCCURRING IN CONNECTION WITH, OR AS A RESULT OF, THE USE OF FAULTY, OR NON-STANDARD, OR “REMANUFACTURED” OR HAND-LOADED OR RELOADED AMMUNITION, OR OF AMMUNITION OTHER THAN FOR WHICH THE FIREARM WAS ORIGINALLY CHAMBERED.

DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS, OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD OR OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES. WASH HANDS THOROUGHLY AFTER EXPOSURE.

9 OPERATING INSTRUCTIONS

OPENING THE BOLT Keeping the muzzle of the shotgun pointed in a safe direction and your fingers out of the trigger guard and away from the trigger.

1. Move the manual safety button to the “SAFE” position. (Ref. to Manual Trigger Safety Operation, page 8) 2. Make sure that the firearm is unloaded. 3. Lock the carrier by pushing the shell release button. (Ref. to Fig. 8) Note: The bolt only locks open when the carrier is locked and no ammunition is in the magazine. 4. While resting the butt pad against your thigh, grasp the shotgun forend firmly with one hand. 5. With the other hand grasp the bolt handle and pull the bolt rearward until the bolt locks into the open position. (Ref. to fig. 9)

Fig. 8 Fig. 9

CHECKING FOR AND CLEARING BORE OBSTRUCTIONS The barrel of your shotgun should always be checked for obstructions before assembly, before loading, and immediately following any occurrence in the field which might result in mud, dirt, or other debris entering the bore.

NEVER ATTEMPT TO CHECK FOR OR CLEAR A BORE OBSTRUCTION BY LOADING AND DISCHARGING A SHOT SHELL! IF A BORE OBSTRUCTION IS PRESENT, THIS CAN CAUSE EXCESSIVE PRESSURES WHICH MAY RESULT IN SERIOUS INJURY OR DEATH, AS WELL AS DAMAGE TO YOUR SHOTGUN.

10 CHECKING FOR BORE OBSTRUCTIONS Keeping the muzzle of the shotgun pointed in a safe direction and your fingers out of the trigger guard and away from the trigger:

1. Move the manual safety button to the “SAFE” position. (Ref. to Manual Trigger Safety Operation, Pg. 8) 2. Make sure that the firearm is unloaded. Ref.( to Unloading the Shotgun, page 14) 3. Disassemble barrel from receiver. (refer to Removing the Barrel, page 25) 4. Visually check the bore for obstructions by looking through the barrel from the breech end through the muzzle. CLEARING A BORE OBSTRUCTION Follow all instructions for Checking For Bore Obstructions above. 1. Push a shotgun bore cleaning tool through the bore from the breech end until the end of tool exits the muzzle. 2. If the obstruction cannot be easily cleared, contact the Weatherby® Service Department or your local gunsmith. CLOSING THE BOLT Keeping the muzzle of the shotgun pointed in a safe direction and your fingers out of the trigger guard and away from the trigger:

To avoid injury, keep hands and fingers away from the loading port when releas- ing the bolt from the locked open position. Do not depress the bolt release button without a barrel installed; this will cause damage to the receiver.

1. Move the manual safety button to the “SAFE” position. (Ref. to Manual Trigger Safety Operation, page 8) 2. Hold the shotgun with one hand grasping the forend firmly. 3. With the other hand press the bolt release button to permit the bolt to move forward. 4. Visually check the manual safety button to make certain it is in the “SAFE” position. (Ref.to Manual Trigger Safety Operation, Page 8)

If a shot shell is in the receiver loading port when the bolt release button is de- pressed and the manual safety is not in the “SAFE” position, the shotgun is now ready to fire. Do not touch the trigger until you are ready to fire.

11 This semi-automatic Shotgun has an inertia operating system which requires a minimum kinetic energy to operate correctly. We suggest you check the technical data tables of ammunition manufacturers to assure you have ammunition that will perform correctly in this shotgun. Required energy by action size/gauge is:

GAUGE / ACTION SIZE JOULES FOOT-POUNDS 12 GA / 3” 2255 1663 12 GA / 3.5” 2353 1735 20 GA / 3” 1865 1375

LOADING THE SHOTGUN Fig. 10 Familiarize yourself with the warnings and information regarding Ammunition beginning on page 12 and examine all shot shells to confirm that they are the proper gauge and length for your shotgun.

Keeping the muzzle of the shotgun pointed in a safe direction, and Fig. 11 your fingers out of the trigger guard and away from the trigger: 1) Visually check the manual safety button to make sure it is in the “SAFE” position. (Refer to Manual Trigger Safety Operation, Page 8) 2) Load the first two shot shells by sliding them into the magazine tube, depressing the shell carrier. (Ref. to fig. 10) 3) Chamber a shell by pressing the carrier release button (Ref. to fig. 12) and pulling the bolt lever fully to the rear and releasing it. (Ref. to fig. 11)

• USE ONLY SHOT SHELLS OF THE PROPER GAUGE AND LENGTH AS MARKED ON THE BARREL OF THE SHOTGUN • NEVER SHOOT SLUGS WITH ANY CHOKE TUBE EXCEPT THE CYLINDER CHOKE TUBE WHICH IS MARKED WITH FIVE CUTS (REFER TO MULTI-CHOKE TUBES, PAGE 15). • NEVER USE SHELLS WITH A LENGTH LONGER THAN THE CHAMBER (REFER TO BARREL FOR APPROVED SHELL SIZES) AS THIS WOULD HAVE SERIOUS CONSEQUENCES FOR BOTH THE GUN AND THE SHOOTER. • NEVER SHOOT STEEL SHOT USING FULL OR IMPROVED MODIFIED CHOKES. USE ONLY MODIFIED, IMPROVED CYLINDER OR CYLINDER CHOKE TUBES MARKED WITH THREE, FOUR AND FIVE CUTS RESPECTIVELY (REFER TO MULTI-CHOKE TUBES, PAGE 15).

4) Load another shell into the magazine tube by pressing the carrier release button (Ref. to fig. 10) and sliding a shell into the magazine tube, depressing the shell carrier.

12 The gun is now loaded with a shell in the barrel ready to fire and two shells in the magazine. Note: The magazine tube holds two shells when the magazine plug is installed. The magazine tube holds three 2 3/4” shells or three 3” shells when the plug has been removed.

TO FEED A SHELL FROM THE MAGAZINE INTO THE CHAMBER Keeping the muzzle of the shotgun pointed in a safe direction, and your fingers out of the trigger guard and away from the trigger. Fig. 12 1. Visually check the manual safety button to make sure it is in the “SAFE” position. (Ref. to Manual Trigger Safety Operation, page 8) 2. Press the shell release button to release a shell from the magazine onto the carrier. (Ref. to Fig. 12) 3. Cycle the bolt by pulling it to the rear and releasing it to permit feeding of the shell into the chamber.

NOTE: Allow the bolt to slam forward. Slowly moving the bolt forward may not allow the bolt head to rotate and lock into battery, causing a misfire.

IF THE MANUAL SAFETY IS NOT IN THE “SAFE” POSITION, THE SHOTGUN IS NOW READY TO FIRE. DO NOT TOUCH THE TRIGGER UNTIL YOU ARE READY TO FIRE.

TO SINGLE-LOAD THE CHAMBER WITHOUT SHELLS IN THE MAGAZINE. Keeping the muzzle of the shotgun pointed in a safe direction, and your fingers out of the trigger guard and away from the trigger at all times: 1. Move the manual safety button to the “SAFE” position. (Ref. to Manual Trigger Safety Operation, Page 8) 2. Open the bolt of the shotgun. (Ref. to Opening the Bolt, Page 8) 3. Drop a shot shell of the proper gauge and length (Ref. to Ammunition, page 9) directly into the ejection port, with the crimped end of the shot shell forward toward the muzzle. 4. Press the bolt release button (Ref. to Closing the Bolt, Page 11) to allow the bolt to close and feed the shell into the chamber.

TO SINGLE-LOAD THE CHAMBER WITH SHELLS IN THE MAGAZINE. Keeping the muzzle of the shotgun pointed in a safe direction, and your fingers out of the trigger guard and away from the trigger at all times: 1. Move the manual safety button to “SAFE” position. (Ref. to Manual Trigger Safety Operation, page 8) 2. Hold the bolt of the shotgun back with one hand while dropping one shot shell of the proper gauge and length (Ref. to Ammunition, page 9) directly into the receiver ejection port, with the crimped end of the shot shell forward toward the muzzle. 3. Release the bolt handle to allow the bolt to close and feed the shell into the chamber. Note: Allow the bolt to slam forward. Slowly riding the bolt forward may not allow the bolt head to rotate into battery, causing a misfire.

13 FIRING THE SHOTGUN 1. With a shot shell in the chamber of the barrel, and keeping the muzzle of the shotgun pointed in a safe direction and your fingers out of the trigger guard and away from the trigger, move the manual safety button to the “FIRE” position. (Ref. to Manual Trigger Safety Operation, page 8) 2. Hold the recoil pad snugly to your shoulder and carefully point the muzzle of the shotgun at your intended target. 3. Place your finger lightly on the trigger and squeeze with steadily increasing pressure until the shotgun fires. 4. Unless an immediate second shot is intended, immediately: a. Remove your finger from the trigger. b. Place the manual trigger safety in the “ON” or “SAFE” position. (Ref. to Manual Trigger Safety Operation, Page 8) c. Unload the Shotgun. (Ref. to Unloading the Shotgun, below)

DO NOT TOUCH THE TRIGGER UNTIL YOU ARE ACTUALLY READY TO FIRE THE SHOTGUN, OR AN UNINTENDED DISCHARGE MAY OCCUR, POSSIBLY RESULTING IN DEATH OR INJURY TO A BYSTANDER, OR DAMAGE TO AN UNINTENDED TARGET.

Attention: The 18i™ Semi-Automatic is designed to avoid firing when the bolt is not fully closed. Check that the bolt locking head is fully closed and locked by pushing the bolt handle until it is completely forward. - After firing the last round the breech bolt automatically stays in the open position. This open breech signals that the magazine is empty.

If another shot shell is in the magazine it will automatically be fed into the chamber and will fire upon the next pull of the trigger.

UNLOADING THE SHOTGUN Always unload your shotgun immediately after you finish shooting. Fired shells will be ejected from the breech automatically. To unload unfired shells from the shotgun follow these directions: With the manual trigger safety in the “ON” position (Ref. to Manual Trigger Safety Operation, page 8), and keeping the muzzle of the shotgun pointed in a safe direction and your fingers out of the trigger guard and away from the trigger at all times: 1) Pull the bolt handle to the rear to eject any shell in the chamber. If there is a shell in the chamber and a shell on the shell carrier, forward movement of the bolt will load the shell from the carrier into the chamber. To eject that shell, pull and release the bolt handle again. (Ref. to Fig. 13)

14 2) If any shells remains in the magazine tube, press the shell release button to place the shell on to the carrier. Pull the bolt lever back to place that shell into the chamber. Then pull the bolt back again to eject the shell from the chamber. Continue until all shells have been ejected. Fig. 13

3) Always check to make sure the shotgun is completely unloaded when you are finished shooting.

VISUALLY AND MANUALLY CHECK TO BE SURE THAT NO AMMUNITION IS PRESENT IN THE CHAMBER OR MAGAZINE. IF A SHOT SHELL IS IN THE RECEIVER LOADING PORT WHEN THE BOLT RELEASE BUTTON IS DEPRESSED AND THE MANUAL SAFETY IS NOT IN THE “SAFE” POSITION, THE SHOTGUN IS NOW READY TO FIRE. DO NOT TOUCH THE TRIGGER UNTIL YOU ARE READY TO FIRE.

MULTI-CHOKE TUBES

Each new Weatherby® 18i™ semi-auto shotgun is equipped with 5 interchangeable choke tubes suitable for use with lead and/or steel shot, and one choke tube wrench. (Ref. to Fig. 16) If applicable, one of the choke tubes is installed in the muzzle of the barrel, and the remaining choke tubes are packaged in the shipping box. Weatherby® choke tubes are crafted from high grade steel and are certified for steel shot from cylinder bore through modified choke constrictions. Please consult the choke value chart (page 18) for suggested usage.

The choke type is identified on the choke tube by notches or symbols. (Ref. to Fig. 14 and 15)

Fig. 14 Fig. 15

15 WHEN REMOVING, INSTALLING OR TIGHTENING CHOKE TUBES, MAKE CERTAIN THERE ARE NO SHOT SHELLS IN THE CHAMBER, RECEIVER OR MAGAZINE. KEEP THE MUZZLE OF THE SHOTGUN POINTED IN A SAFE DIRECTION, AND KEEP YOUR FINGERS OUT OF THE TRIGGER GUARD AND AWAY FROM THE TRIGGER AT ALL TIMES TO AVOID ACCIDENTAL DISCHARGE RESULTING IN POSSIBLE SERIOUS INJURY OR DEATH TO YOURSELF OR OTHERS.

REMOVING CHOKE TUBES After each shooting session, the choke tube should be removed, cleaned, lubricated and reinstalled to prevent corrosion. Powder residues, if not regularly cleaned, will make the removal of the choke tube more difficult. Keeping the muzzle of the shotgun pointed in a safe direction, and keeping your fingers out of the trigger guard and away from the trigger at all times:

1) If removing a choke tube from a barrel installed on a shotgun: a. Make sure the manual trigger safety is in the “ON” position (refer to Manual Trigger Safety Operation, Page 8) b. Unload the shotgun. (refer to Unloading the Shotgun, Page 14)

Fig. 16 2) Remove the choke tube by inserting the choke wrench (Ref. to Fig. 16) and turning it counter clockwise. (Ref. to Fig. 17 and 18)

3) After cleaning and lubricating, the choke tube may be reinstalled. (refer to Installing Choke Tubes, Page 17)

Fig. 17 Fig. 18

Fig. 18

16 INSTALLING CHOKE TUBES Choke tubes may be installed into a barrel dissembled from the shotgun or with the barrel assembled to the shotgun by following these simple instructions. NOTE: If installing choke tubes with the barrel removed from the shotgun, begin from instruction no. 2.

Keeping the muzzle of the shotgun pointed in a safe direction, and keeping all fingers out of the trigger guard and away from the trigger at all times:

1. When installing a choke tube in a barrel installed on a shotgun, a. Make sure the manual trigger safety is in the “ON” position. (Ref. to Manual Trigger Safety Operation, Page 8) b. Unload the shotgun. (Ref. to Unloading the Shotgun, Page 14) 2. Insert the smooth (non notched) end of the choke tube into the muzzle of the barrel, and screw it into the barrel as far as possible with your fingers, turning it in a clock-wise direction, being careful not to cross thread the choke. 3. Insert the stepped end of the choke tube wrench into the notches in the muzzle end of the choke tube, and continue turning clock-wise until the choke tube is seated, tightening snugly. NOTICE: To prevent damage to barrel or choke tube threads, do not over-tighten. NOTE: If the choke tube is correctly installed, it will not stick out of the muzzle.

IF A CHOKE IS DROPPED CHECK FOR ANY DAMAGE. DO NOT USE A BENT OR DAMAGED CHOKE AS THIS MAY DAMAGE THE BARREL RESULTING IN SERIOUS INJURY OR DEATH.

TIGHTENING CHOKE TUBES Choke tubes may loosen with repeated recoil, which may result in changes in point of impact or damage to choke tube or barrel threads with extended use. Check and tighten choke tubes frequently before after and during shooting. Choke tubes may be tightened with the barrel installed on the shotgun, or with the barrel removed from the shotgun. NOTE: If tightening a choke tube with the barrel removed from the shotgun, begin with instruction no. 2.

• Never shoot steel shot with a full or improved modified choke. Use only modified, improved cylinder or cylinder chokes (marked three, four, five cuts respectively). • Never shoot slugs with a full choke, use only the most open choke which is marked with five cuts. • Never shoot without a choke tube fitted in the barrel

17 Keeping the muzzle of the shotgun pointed in a safe direction, and keeping all fingers out of the trigger guard and away from the trigger at all times:

1. If tightening a choke tube in a barrel installed on a shotgun, a. Make sure the manual trigger safety is in the “ON” position. (Ref. to Manual Trigger Safety Operation, Page 8) b. Unload the shotgun. (Ref. to Unloading the Shotgun, Page 14)

2. Insert the stepped end of the choke tube wrench into the notches in muzzle end of choke tube, and tighten the choke tube snugly, turning clock-wise.

CHOKE NOTCH STEEL GAME SHELL TYPE PELLET DIS- TYPE # SHOT SIZE TANCE (YARDS) FULL I NO WATERFOWL MAGNUM, 1-2-3 50-56 (NEED LARGE BIRD DEMI-MAGNUM, MAXI SI90) ARMORED IMPROVED II NO WATERFOWL MAGNUM, 4-5-6 41-44 MODIFIED (NEED SMALL GAME DEMI-MAGNUM, MAXI SI90) BIRD ARMORED MODIFIED III YES BIRD ARMORED AND 5-6-7-8 34-41 WATERFOWL NORMAL

IMPROVED- IIII YES SKEET NORMAL 7-8-9- 30-35 CYLINDER SMALL BIRD 10-11-12

CYLINDER IIIII YES SKEET NORMAL 7-8-9- 20-30 10-11-12

USE OF BARREL EXTENSION Fig. 19 Weatherby® 18i™ shotguns are made to accept a 2" barrel extension. These are accessories available for purchase upon request.

Installing a barrel extension: - Remove the choke tube by inserting the choke tube key and turning it counter- clockwise. (refer to Fig. 19)

18 - Reinstall the choke tube by starting the Fig. 20 thread by hand, then tightening the choke tube with its key. (refer to Fig. 20 and 21) - Now the gun is ready to be used.

Fig. 21

Never shoot without a choke tube fitted in the barrel extension!

ADJUSTMENT AND OPTIONS

CHANGING THE STOCK DROP, CAST, AND LENGTH OF PULL Your Weatherby® 18i™ semi-auto shotgun comes with length of pull (LOP) spacers, along with shims to adjust drop and cast. The LOP spacers allow the user to increase the overall length of the buttstock, measured between the center of the recoil pad and the front of the trigger. The drop and cast shims allow the user to adjust the angle of the buttstock left to right (cast) and up and down (drop). The stock of the semiautomatic Weatherby® 18i™ has a standard drop of 55 mm (2.1 inches) at the Heel and 40 mm (1.5 inches) at the Comb. Accordingly, a standard drop shim marked 55 is already fitted on the gun between the stock and the receiver. In order to accommodate all shooters’ needs a drop change kit is included as standard equipment. The kit provides two shims marked 50 and 60 (the number on the shim is not indicative of length, but an indicator only and shows how to change the drop “plus” or “minus”). To accommodate left handed shooters, a left hand cast shim marked “LH” has also been included (Refer to Fig. 22). To change the drop refer to Fig.24 throughout the following instructions: Note: At least one shim must be always be fitted on the gun, otherwise the stock might be damaged during shooting.

19 Fig. 22 Iron Plate E

Fig. 23

Before making any adjustment, make absolutely sure the shotgun is completely unloaded. (Ref. to Unloading the Shotgun, Page 14)

1. Using a Phillips-head screwdriver, unscrew the butt plate screws (A) to remove the butt plate. NOTE: use oil or wax on screwdriver to prevent damaging the butt pad. 2. Remove the stock by first removing the retaining nut (B) using a 14 mm socket or box wrench, then removing the washers (C & D) and the iron plate (E), and sliding the stock rearward off the recoil spring tube. 3. Insert the shim (F) corresponding to the desired drop over the recoil spring tube until the shim is flush with the receiver.Note: Each LOP spacer used will increase or decrease the LOP by 5mm (3/16”). Up to (3) LOP Spacers can be installed. 4. Install the stock and insert the iron plate (E) (Fig. 23) and washer (C) and (D). 5. Tighten the stock retaining nut (B) using the socket or hex wrench. 6. Install the butt plate and insert the screws (A) using a Phillips-head screwdriver to tighten.

After firing a few rounds, check to assure that the stock is tightened snugly to the receiver. If necessary, remove the recoil pad and re-tighten the stock nut (B). Fig. 24

20 MAGAZINE LIMITER PLUG REMOVAL Since hunting regulations in some areas limit the number of shells allowed in the magazine, your Weatherby® 18i™ is equipped with a removable limiter plug, which reduces its magazine capacity to two shells. Check your local area hunting regulations to ensure compliance before removing this limiter plug. Before removing the magazine limiter plug, make sure the Manual Safety Button is in the “ON” position (Ref. to Manual Trigger Safety Operation, page 8), and that the shotgun is unloaded. (Ref. to Unloading the Shotgun, page 14) Keeping the muzzle of the shotgun pointed in a safe direction, and your fingers out of the trigger guard and away from the trigger at all times. 1) Unscrew and remove the magazine cap. (Ref. to Mounting the Barrel to the Receiver, Page 7) 2) Turn the shotgun over and remove the magazine plug from its housing. (Ref. to Fig. 25 and 26)

Fig. 25

Fig. 26

21 CLEANING AND MAINTAINING YOUR WEATHERBY® 18i™ SEMI-AUTO SHOTGUN

Any firearm requires regular cleaning and periodic maintenance. To assure safe and reliable functioning of your Weatherby® 18i™ semi-auto shotgun, it is very important that you clean it immediately after each use, and periodically during extended storage periods, to remove powder residue, dirt, dust and excess lubricant, and to prevent rust. During cleaning, inspect components to determine whether they are in proper working order. A basic cleaning kit consists of proper-sized cleaning rods, bore brushes, bore swabs, patches, gun cleaning solvent, gun lubricant, and lint-free cloths. The cleaning rod must have a tip with a slot into which patches can be inserted. Tooth brushes, cotton swabs and pipe cleaners are very handy tools for cleaning away dirt in hard to reach places. Proper maintenance is one of the most important facets in assuring the best performance of any firearm and safety of the shooter. - Before using your Weatherby® 18i™ shotgun, inspect the barrel to make sure there are no bore obstructions, and that it is free of excess lubricant. - After each shooting session, disassemble at least the barrel, the choke tube and the bolt mechanism for cleaning and lubricating. - At frequent regular intervals, fully disassemble your shotgun (refer to Dissasembly of Your Weatherby® 18i™ Semi-Auto Shotgun, Page 25) for thorough cleaning and proper lubrication. - If the gun is used on a wet day, be sure to dry the gun and any wood parts in a well ventilated area. - Do not store your shotgun in a gun case, gun slip, or gun sock if not completely dry. - Storage of the gun in a plastic or synthetic gun case or gun slip for extended periods of time is not recommended. To properly clean your shotgun, it must first be disassembled (Ref. to Disassembly of your Weatherby® Semi-Auto Shotgun, page 25), the parts and components cleaned as discussed below, then reassembled. (Ref. to Assembly Instructions, page 26)

APPLY SOLVENTS AND LUBRICANTS PROPERLY AND SPARINGLY. EXCESSIVE OR BUILT-UP SOLVENTS AND LUBRICANTS MAY CONGEAL OR ATTRACT AND RETAIN DUST AND GRIME, WHICH CAN IMPEDE PROPER FUNCTIONING OF PARTS CRITICAL TO SAFE OPERATION, POTENTIALLY RESULTING IN DAMAGE TO THE SHOTGUN AND SERIOUS INJURY OR DEATH TO THE SHOOTER OR BYSTANDERS.

DO NOT SPRAY OR APPLY SOLVENTS OR LUBRICANTS DIRECTLY ON AMMUNITION. SOLVENTS AND LUBRICANTS MAY AFFECT THE PROPELLANT, CAUSING IT NOT TO IGNITE, BUT THE ENERGY FROM THE PRIMER MAY BE SUFFICIENT TO PROPEL THE PROPELLANT, WAD AND SHOT COLUMN INTO THE BORE OF THE BARREL, CAUSING AN OBSTRUCTION, AND RESULTING IN DAMAGE TO THE SHOTGUN AND SERIOUS INJURY OR DEATH TO THE SHOOTER AND BYSTANDERS UPON FIRING A SUBSEQUENT SHOT SHELL.

22 CLEANING THE BORE 1. Disassemble the barrel from the shotgun. (Ref. to Removing Barrel, Page 25) 2. Remove the choke tube by inserting the choke wrench and turning it counter-clockwise. (Ref. to Fig. 19, 20 & 21, page 19) 3. Apply gun cleaning solvent to a bore cleaning brush of the proper size attached to the cleaning rod. 4. Push the brush all the way through the barrel bore several times from the chamber end. 5. Insert the brush into the muzzle of the barrel only far enough to encounter the threads for the choke tube, and twist it several times. 6. With a clean patch inserted in the tip attached to the cleaning rod, push the rod all the way through the barrel bore from the chamber end until the cloth emerges from the muzzle. Remove the dirty patch and withdraw the rod. 7. Repeat step 6 as many times as needed until the patch is clean as it emerges from the muzzle. 8. Using a clean patch or lint-free cloth wrapped around the tip of your finger or similarly shaped object, remove all solvent from the muzzle and from the choke tube threads inside the barrel bore. 9. Insert a patch saturated with gun lubricant into the cleaning rod tip and push it through the bore from the chamber end. Remove the patch and withdraw the rod. 10. Insert a dry, clean patch into the cleaning rod tip and push it through the bore from the chamber end, to remove excess lubricant. Remove the patch and withdraw the rod. 11. Using a clean patch or lint-free cloth wrapped around the tip of your finger or similarly shaped object, apply a light coat of gun lubricant to the choke tube threads and muzzle of the barrel bore.

EXCESS LUBRICATION IN THE BORE OR CHAMBER OF ANY FIREARM MAY CREATE EXCESSIVE CHAMBER PRESSURES OR A PARTIAL BORE OBSTRUCTION, RESULTING IN POSSIBLE DAMAGE TO THE FIREARM AND SERIOUS INJURY TO THE SHOOTER AND BYSTANDERS UPON FIRING. BE SURE ALL EXCESS LUBRICANT HAS BEEN REMOVED.

CLEANING THE OUTSIDE OF THE BARREL 1. Using a patch or clean cloth saturated with cleaning solvent, wipe down all accessible surfaces of the barrel, rib and barrel ring. (A clean tooth brush may be handy for cleaning the corners and recesses of the rib and barrel ring.) 2. With a clean, dry, lint-free cloth, remove all cleaning solvent. 3. Using a patch or clean cloth, apply a light coat of gun lubricant to the outside surfaces of the barrel, rib and barrel ring, being careful to remove any excess lubricant.

CLEANING CHOKE TUBES 1. Apply gun cleaning solvent to a bore cleaning brush of the proper size attached to the cleaning rod. 2. Push the brush all the way through the choke tube several times. 3. With a clean patch inserted in the tip attached to the cleaning rod, push the rod all the way through the choke tube until the patch emerges from the other end. Remove the

23 dirty patch and withdraw the rod. 4. Repeat step 3 as many times as needed until the patch is clean as it emerges from the choke tube. 5. Insert a patch saturated with gun lubricant into the cleaning rod tip and push it through the choke tube. Remove the patch and withdraw the rod. 6. Insert a dry, clean patch into the cleaning rod tip and push it through the choke tube to remove excess lubricant. Remove the patch and withdraw the rod. 7. Using a patch or clean cloth saturated with gun cleaning solvent, wipe down the outside surfaces of the choke tube. (A clean tooth brush may be handy for cleaning the threads.) 8. With a clean, dry lint-free cloth, remove all cleaning solvent. 9. Using a patch or clean cloth, apply a light coat of gun lubricant to the outside surfaces of the choke tube, being careful to remove any excess lubricant.

CLEANING THE ACTION: 1. Using a small lint-free cloth, clean all accessible surfaces on the inside and outside of the action with gun cleaning solvent. A clean tooth brush may be handy for cleaning the corners and recesses of the receiver. 2. Dry all inside and outside surfaces of the receiver thoroughly with a clean, dry cloth. 3. With a clean cloth or patch, apply a light coat of gun lubricant to all accessible surfaces of the action being careful to remove any excess lubricant.

CLEANING THE MAGAZINE 1. Using a lint-free cloth, clean all outside surfaces of the magazine tube with gun clean- ing solvent, and dry thoroughly with a clean cloth. 2. With a clean, dry, lint-free cloth or patch, apply a light coat of gun lubricant to the outside surface of the magazine tube.

CLEANING THE FOREND AND BUTTSTOCK Usually, wiping the forend and butt stock with a clean, dry cloth or a silicon cloth is all that is necessary. If you have been hunting or shooting in wet weather, allow the butt stock to dry thoroughly before storage.

RUST PREVENTION AND REMOVAL During normal maintenance, after a thorough cleaning, allow 2-3 hours at room temperature, for all metal parts to dry completely. Then apply a liberal amount of high grade Gun Oil to all metal parts, wiping off any excess with a clean dry cloth. If rusting does occur it may only be surface rust due to excessive moisture. You may be able to remove it by using a plastic bristle gun cleaning brush and gun cleaning solvent. If you are unable to remove rust on your shotgun, please contact the Weatherby® Service Department or your local gunsmith. Immediate attention to this problem is imperative to prevent irreparable rust damage.

DO NOT ALLOW RUST TO GO UNTREATED!

24 DISASSEMBLY OF YOUR WEATHERBY® 18i™ SEMI-AUTO SHOTGUN

REMOVING THE BARREL AND FOREND Keeping muzzle of the shotgun pointed in a safe direction, and keep your fingers out of the trigger guard and away from the trigger at all times:

It is recommended that this operation be conducted with the shotgun setting vertically on its recoil pad while holding the action and/or grip.

1) Unload the shotgun. (Ref. to Unloading the Shotgun, page 14). 2) Open the bolt by pressing the bolt release, pushing the shell release button, and sliding the bolt back (Ref. to Opening the Bolt, Page 10). 3) Unscrew the magazine cap by turning it counter clockwise and remove it (Ref. to Fig. 27). 4) GRASPING THE SHOTGUN BY THE ACTION OR GRIP AREA, Fig. 27 slide the barrel and forend toward the muzzle and remove them. (Ref. to Fig. 28 and 29). 5) Pull the forend off the barrel, slide it onto the magazine tube, and screw the magazine cap back onto the magazine if storing with the barrel removed.

REMOVING THE TRIGGER GROUP To remove the trigger group from the receiver, follow these instructions: 1) Unload the shotgun. (Ref. to Unloading the Shotgun, page 14)

2) By means of a punch or a similarly suitable tool, push the trigger guard pin through the receiver and remove the pin.

3) While pushing the bolt release, push the trigger group forward and remove the trigger group. Be careful not to force removal of the trigger guard without pushing the bolt release, this may damage the gun.

Fig. 28 Fig. 29

25 Fig. 30 REMOVING THE BOLT ASSEMBLY The bolt assembly should be removed for cleaning and lubricating only.

1) Remove the barrel (Ref. to Removing the Barrel, page 25) 2) Remove the bolt handle by pulling it straight out from the right side of the bolt. (Ref. to Fig. 30) 3) Pull the bolt out of the front of the receiver. (Ref. to Fig. 31) Fig. 31

WEATHERBY RECOMMENDS THAT ANY DISASSEMBLY AND REASSEMBLY OF THE BOLT ASSEMBLY BE PERFORMED ONLY BY A QUALIFIED GUNSMITH, TO AVOID REASSEMBLY ERRORS WHICH MIGHT IMPACT THE INTEGRITY OF THE SHOTGUN’S BREECH LOCKING MECHANISM, POTENTIALLY RESULTING IN DAMAGE TO THE SHOTGUN AND SERIOUS INJURY TO THE SHOOTER AND BYSTANDERS UPON FIRING.

ASSEMBLY OF THE WEATHERBY® 18i™ SEMI-AUTO SHOTGUN

TRIGGER GROUP INSTALLATION 1) After cleaning and lubricating the trigger group, make sure that the hammer is cocked. 2) Reinsert the trigger group into the receiver and push it rearward while pressing the bolt release. 3) Align the hole in the trigger group with the hole in the receiver, and then insert the trigger guard pin.

INSTALLING THE BOLT ASSEMBLY 1) Insert the whole bolt mechanism into the receiver. Make sure to correctly insert the bolt link into its housing inside the receiver. (Ref. to Fig. 31) 2) Complete the installation by pushing the bolt handle back into the bolt, until it stops and clicks. (Ref. to Fig. 30)

INSTALLING THE BARREL AND FOREND 1) Install the barrel. (Ref. to Installing the Barrel, page 7) 2) Install the forend. (Ref. to Installing the Forend, page 7)

26 SUGGESTIONS FOR GETTING TOP PERFORMANCE FROM YOUR WEATHERBY® 18i™ SEMI-AUTO SHOTGUN

1. Check and tighten choke tubes frequently -- before, during and after shooting. Choke tube threads may loosen with repeated recoil, which may result in changes in point of impact or damage to choke tube or barrel threads with extended use. 2. The accuracy of any firearm can vary depending upon the brand and type of ammunition used. If your shotgun does not exhibit the consistent point of impact and shot pattern you expect, you should try several brands and types of ammunition, after referring to point 1, above, before concluding that it is “inaccurate”.

DO NOT ALTER THE STOCK IN ANY WAY. Once a stock has been altered, it cannot be reworked by the Weatherby® Service Department.

3. Consult the Weatherby® Service Department before returning any product for inspection or repair.

STORING YOUR SHOTGUN

Your Weatherby® 18i™ semi-auto shotgun may be stored fully assembled (Ref. to Assembly Instructions, page 26), or in “take down” condition.

If storing your shotgun fully assembled, release the pressure on the hammer spring as follows:

1. Make certain the shotgun is not loaded by following unloading procedures. (Ref. to Unloading the Shotgun, page 14) 2. Close the bolt. (Ref. to Closing the Bolt, page 11) 3. While pointing the muzzle of the shotgun in a safe direction, pull the trigger.

Do not store your shotgun in a leather case, scabbard or foam lined gun case. Leather and foam can attract moisture and cause rusting. Ensure the surfaces of the gun are cleaned and lightly oiled (Refer to Cleaning your Shotgun, Page 22) before storing to ensure no moisture is present which could result in rust.

For your safety, and the safety of others, store your shotgun with a lock or other safety device properly installed, and store your ammunition in a separate, locked location.

27 EXPLODED VIEW DIAGRAM General Assembly 12 Ga 3.5

28 PARTS LIST General Assembly 12 Ga 3.5

18i 12ga 3.5"_EXPLODED VIEW

Pos. Q.tà Codice18i 12ga 3.5"_EXPLODED VIEW18i 12ga 3.5"_EXPLODED VIEW PARTICOLARE PRICE 1 1 WBY1289.G001 CARCASSA RECEIVER NOT AVAILABLE Pos.2 Q.tàPos. 1Q.tà Codice1000.54/Codice PARTICOLARE Tubo PARTICOLARE calcio SOTCK TUBE PRICEPRICE 19,00 131 1 1 WBY1289.G001 WBY1289.G001GR.D007 CARCASSA vite CARCASSA tirante tubo calcio - super magnum RECEIVERSTOCK RETAINING NUT SCREWRECEIVER NOT AVAILABLENOT AVAILABLE6,00 242 1 1 1 1000.54/1000.68.01000.54/ Tubo Piastrina calcio Tubo calcio fissaggio calcio SOTCK TUBESTOCK LOCKING PLATESOTCK TUBE 19,00 4,8019,00 353 1 1 1 GR.D007ID.008GR.D007 vite Rondellatirante vite tirante tubo vite calciotubo tirante calcio - super - supermagnum magnum STOCK RETAINING NUT SCREWSPACER STOCK NUT SCREW STOCK RETAINING NUT SCREW 6,00 2,006,00 464 1 1 1 1000.68.0ID.0091000.68.0 Piastrinarondella Piastrina fissaggio grower fissaggio calcio DIN127-B calcio M8 STOCK LOCKING PLATEELASTIC WASHERSTOCK LOCKING PLATE 4,80 2,004,80 STOCK RETAINING NUT 2,00 575 1 1 1 ID.008ID.010ID.008 RondellaDadoRondella vite ISO tirante 8673-M8x1 vite tirante SPACER STOCK NUT SCREW SPACER STOCK NUT SCREW 2,00 2,00 686 1 1 1 ID.009GR.D005ID.009 rondella Massarondella grower SM grower DIN127-B DIN127-B M8 M8 ELASTIC WASHERRECOIL SPRING PLUNGERELASTIC WASHER 2,0010,002,00 797 1 1 1 ID.010GR.D011ID.010 Dado POSIZIONATORI DadoISO 8673-M8x1 ISO 8673-M8x1 HALDER H22060.0108 STOCK RETAINING NUT STOCK RETAINING NUT 2,00 2,00 8108 1 1 1 GR.D005GR.D006GR.D005 Massa Molla Massa SM tubo SM calcio RECOIL SPRING PLUNGERSTOCK TUBE SPRINGRECOIL SPRING PLUNGER 10,00 6,0010,00 9119 1 1 1 GR.D011TAC010.IGR.D011 POSIZIONATORI anello POSIZIONATORI centraggio HALDER HALDER asta H22060.0108 TACTICAL H22060.0108 cal.12 FOREND CENTERING RING 3,00 101210 1 1 1 GR.D006TAC001GR.D006 MollaTubo Mollatubo SERBATOIO calciotubo calcio STOCK TUBE SPRINGMAGAZINE TUBESTOCK TUBE SPRING 6,0022,006,00 111311 1 1 1 TAC010.ITAC004TAC010.I anelloAnello anello centraggio di centraggio battuta asta tenone TACTICAL asta TACTICAL cal.12 cal.12 FOREND CENTERING RINGMAGAZINE TUBE RING AGAINST BARREL NUT (TO BE GLUED)FOREND CENTERING RING 3,00 3,003,00 121412 1 1 1 TAC001IE.007TAC001 Tubovite SERBATOIOTubo testa SERBATOIO bomb imp a croce MAGAZINE TUBEMAGAZINE TUBE 22,00 22,00 131513 1 1 1 TAC004IE.009TAC004 AnellorondellaAnello di battuta dipiana battuta tenone UNI tenone6592-DIN 125A - M4 MAGAZINE TUBE RING AGAINST BARREL NUT (TO BE GLUED)MAGAZINE TUBE RING AGAINST BARREL NUT (TO BE GLUED) 3,00 3,00 141614 1 1 1 IE.007 WBY12.E002IE.007 vite Tappotestavite bombtesta Asta bomb imp a impcroce a croce FOR END LOCK CAP 15,00 151715 1 1 1 IE.00990124IE.009 rondellaportarondella piana cinghia piana UNI 6592-DIN UNI 6592-DIN 125A -125A M4 - M4 161816 1 1 1 WBY12.E002 WBY12.E002IR.004 TappoSpingi Tappo Asta cartuccia Asta FOR END LOCK CAPMAGAZINE FOLLWERFOR END LOCK CAP 15,00 3,0015,00 171917 1 1 1 90124IR.0034C90124 porta Molla portacinghia tubo cinghia serbatoio 4 colpi MAGAZINE SPRING 5,00 182018 1 1 1 IR.004TAC003IR.004 Spingi TappoSpingi cartuccia tubo cartuccia serbatoio MAGAZINE FOLLWERMagazine spring cupMAGAZINE FOLLWER 3,00 3,003,00 192119 1 1 1 IR.0034CTAC011.2PIR.0034C Molla RIDUTTORE Mollatubo serbatoiotubo serbatoio 4 colpi 4 colpi MAGAZINE SPRING MagazineMAGAZINE SPRING reducer 5,00 2,005,00 202220 1 1 1 TAC003 GR.G003.02TAC003 Tappo Leva Tappo tubo ferma serbatoiotubo cartucce serbatoio Super Magnum Magazine spring cupMagazine spring cup 3,00 3,00 212321 1 1 1 TAC011.2PSA12.G006TAC011.2P RIDUTTORE Pulsante RIDUTTORE leva ferma cartucce Magazine carrier latch buttonMagazine reducer reducer 2,0031,002,00 Spina leva com.fc. Ø2.5 x 22 DIN 7343 - 222422 1 1 1 GR.G003.02 GR.G003.02IG.004 Leva ferma Leva ferma cartucce cartucce Super SuperMagnum Magnum 2323 1 1 SA12.G006SA12.G006 PulsanteUNI6875 Pulsante leva ferma leva ferma cartucce cartucce carrier latch button carrier latch button 31,00 31,00 25 1 IG.002 SpinaMolla Spinaleva piastrina com.fc. leva com.fc. sgancio Ø2.5 xØ2.5 22 otturatore DIN x 22 7343 DIN - 7343 - 2424 1 1 IG.004IG.004 26 1 IN.004SJ.NUNI6875 CulattaUNI6875 65,00 WBYSM.71T.X (brunita) 252725 1 1 1 IG.002IG.002 Mollacanna Mollapiastrina 28"piastrina sgancio sgancio otturatore otturatore 2626 1 1 WBYSM.71T.KIN.004SJ.NIN.004SJ.N (camo) Culatta Culatta 65,00180,0065,00 28 1 WBYSM.71T.XWBYSM.71T.X930.MF10R (brunita) (brunita) mirino LPA - MF10R FRONT SIGHT 6,00 2727 1 1 cannacanna 28" 28" 29 1 WBYSM.71T.KWBYSM.71T.KIN.005SJ (camo) (camo) spina ritegno espulsore - iso8750 - Ø2x12 180,00180,00 2828 1 1 930.MF10R930.MF10R mirino mirino LPA - MF10RLPA - MF10R FRONT SIGHTFRONT SIGHT 6,00 6,00 2929 1 1 IN.005SJIN.005SJ spina spinaritegno ritegno espulsore espulsore - iso8750 - iso8750 - Ø2x12 - Ø2x12 3030 1 1 IN.006SJIN.006SJ spina spinaritegno ritegno molla mollaespulsore espulsore - iso8750 - iso8750 - Ø1.5x5 - Ø1.5x5 3131 1 1 IN.007SJIN.007SJ espulsore espulsore SJ12SM SJ12SM 6,50 6,50 3232 1 1 IN.008SJIN.008SJ molla mollaespulsore espulsore ID.001SID.001S (soft touch) (soft touch) 3333 1 1 calciocalcio ID.001CO.CID.001CO.C (camo) (camo) STOCKSTOCK 136,00136,00 3434 2 2 IN.000.INSIN.000.INS inserto inserto superiore superiore in gomma in gomma RUBBERED INSERT AT COMBRUBBERED INSERT AT COMB 7,00 7,00 3535 1 1 ID.002ID.002 calciolocalciolo BUTT PLATEBUTT PLATE 15,00 15,00 TAC009STTAC009ST (soft touch) (soft touch) 3636 1 1 asta asta TAC009.CTAC009.C (camo) (camo) FOR END FOR END 70,00 70,00

29 Pos.

01 10

11 11

21 12

31 13

41 14

51 15

61 16

71 17

81 18

91 19

01 20

12 21

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

Q.tà

GR.M002.1

GR.M002.2

GR.M002.2

GR.M002.1

Codice

IM.001

IM.003

IM.004

IM.005

IM.006

IM.007

IM.008

IM.009

IM.010

IM.011

IM.012

IM.013

IM.014

IM.015

IM.016

IM.017

Carrello otturatore cal.12 - cromato

biella SM part.1

Spina biella

Percussore

Molla percussore

Molla fermo manetta

Punta fermo manetta

Spina molla fermo manetta

otturatore cal.12

Molla estrattore

Estrattore cal12

Spina estrattore

Molla inerziale otturatore

perno rotazione testa di chiusura

Spina fermo percussore

manettino otturatore cromato

O-ring fermo spina percussore

biella SM part.2

biella SM part.2

biella SM part.1

PARTICOLARE

EXPLODED VIEW DIAGRAM

Bolt Assembly 12 Ga 3.5”

BOLT GROUP 18i 12ga - 3.5" (A02) valid for: ISY1228SMG IWR1228SMG

BOLT GROUP 18i 12ga - 3.5"

Pos. Q.tà Codice PARTICOLARE PRICE 1 1 IM.001N Carrello otturatore cal.12 - NERO BOLT CARRIAGE BLACK 60,00 2 1 GR.M002 biella SM BOLT - LINK 13,00 3 1 IM.003 Spina biella BOLT LINK PIN 2,00

4 4 1 IM.004 Percussore FIRING PIN 9,50

2 5 1 IM.005 Molla percussore FIRING PIN SPRING 2,00 6 1 IM.006 Molla fermo manetta BOLT HANDLE RATAINING SPRING 1,00 7 1 IM.007 Punta fermo manetta BOLT HANDLE PIN 1,00

5

17 8 1 IM.008 Spina molla fermo manetta BOLT HANDLE SPRING RETAINING PIN 2,00 9 1 IM.009 testa otturatore cal.12 LOCKING HEAD 20,00 10 1 IM.010 Molla estrattore EXTRACTOR SPRING 2,00

8 11 1 IM.011 Estrattore cal12 EXTRACTOR 6,00

15 12 1 IM.012 Spina estrattore SXTRACTOR PIN 2,00 13 1 IM.013 Molla inerziale otturatore BOLT INERTIAL SPRING 7,00 13 14 1 IM.014 perno rotazione testa di chiusura LOCKING HEAD ROTATION PIN 5,00

3 15 1 IM.015 Spina fermo percussore FIRING RETAINING PIN 2,00 16 1 IM.016N manettino otturatore cromato BOLT HANDLE 9,00

11 17 1 IM.017 O-ring fermo spina percussore O -RING 2,00

16

10

1

14

7

9

6

12

30 PARTS LIST Bolt Assembly 12 Ga 3.5”

BOLT GROUP 18i 12ga - 3.5" BOLT GROUP 18i 12ga - 3.5" BOLT GROUP 18i 12ga - 3.5" Pos. Q.tà Codice PARTICOLARE PRICE Pos. Q.tà Codice1 1 IM.001NPARTICOLAREPos. Carrello Q.tà otturatore Codice cal.12 - NERO BOLT CARRIAGE BLACKPARTICOLAREPRICE 60,00 PRICE 1 1 IM.001N2 Carrello 1 otturatore GR.M002 cal.121 biella - NERO SM 1 IM.001NBOLT CARRIAGE BLACK Carrello otturatoreBOLT - LINK cal.1260,00 - NERO BOLT CARRIAGE BLACK13,00 60,00 2 1 GR.M0023 biella 1 SM IM.0032 Spina biella 1 GR.M002BOLT - LINK biella SM BOLT LINK PIN13,00 BOLT - LINK2,00 13,00 3 1 IM.0034 Spina 1 biella IM.0043 Percussore 1 IM.003BOLT LINK PIN Spina biellaFIRING PIN 2,00 BOLT LINK PIN9,50 2,00 4 1 IM.0045 Percussore 1 IM.0054 Molla percussore 1 IM.004FIRING PIN Percussore FIRING PIN SPRING9,50 FIRING PIN2,00 9,50 5 1 IM.0056 Molla 1 percussore IM.0065 Molla fermo 1 manetta IM.005FIRING PIN SPRING Molla percussoreBOLT HANDLE RATAINING SPRING2,00 FIRING PIN SPRING1,00 2,00 6 1 IM.0067 Molla 1 fermo IM.007 manetta 6 Punta fermo 1 manetta IM.006BOLT HANDLE RATAINING SPRING Molla fermoBOLT HANDLE PIN manetta1,00 BOLT HANDLE RATAINING SPRING1,00 1,00 7 1 IM.0078 Punta 1 fermo IM.008 manetta7 Spina molla 1 fermo IM.007BOLT HANDLE PIN manetta Punta fermoBOLT HANDLE SPRING RETAINING PIN manetta1,00 BOLT HANDLE PIN2,00 1,00 8 1 IM.0089 Spina 1 molla IM.009 fermo manetta8 testa otturatore 1 cal.12 IM.008BOLT HANDLE SPRING RETAINING PIN Spina molla LOCKING HEADfermo manetta2,00 BOLT HANDLE SPRING RETAINING PIN20,00 2,00 9 1 IM.00910 testa 1 otturatore IM.010 cal.129 Molla estrattore 1 IM.009LOCKING HEAD testa otturatoreEXTRACTOR SPRING cal.1220,00 LOCKING HEAD2,00 20,00 10 1 IM.01011 Molla 1 estrattore IM.01110 Estrattore 1 cal12 IM.010EXTRACTOR SPRING Molla estrattoreEXTRACTOR 2,00 EXTRACTOR SPRING6,00 2,00 11 1 IM.01112 Estrattore 1 cal12 IM.01211 Spina estrattore 1 IM.011EXTRACTOR Estrattore cal12SXTRACTOR PIN6,00 EXTRACTOR 2,00 6,00 12 1 IM.01213 Spina 1 estrattore IM.01312 Molla inerziale 1 otturatore IM.012SXTRACTOR PIN Spina estrattoreBOLT INERTIAL SPRING2,00 SXTRACTOR PIN7,00 2,00 13 1 IM.01314 Molla 1 inerziale IM.014 otturatore13 perno rotazione 1 testa IM.013BOLT INERTIAL SPRING di chiusura Molla inerzialeLOCKING HEAD ROTATION PIN otturatore7,00 BOLT INERTIAL SPRING5,00 7,00 14 1 IM.01415 perno 1 rotazione IM.015 testa14 di Spina chiusura fermo 1 percussore IM.014LOCKING HEAD ROTATION PIN perno rotazioneFIRING RETAINING PIN testa5,00 di chiusura LOCKING HEAD ROTATION PIN2,00 5,00 15 1 IM.01516 Spina 1 fermo IM.016N percussore15 manettino 1 otturatore IM.015FIRING RETAINING PIN cromato Spina fermoBOLT HANDLE percussore2,00 FIRING RETAINING PIN9,00 2,00 16 1 IM.016N17 manettino 1 otturatore IM.017 16cromato O-ring fermo 1 spina IM.016NBOLT HANDLE percussore manettino otturatoreO -RING 9,00 cromato BOLT HANDLE2,00 9,00 17 1 IM.017 O-ring fermo spina percussore17 1 IM.017O -RING O-ring fermo spina percussore2,00 O -RING 2,00

31 Pos. 01 10 11 11 21 12 31 13 41 14 51 15 61 16 71 17 12 21 1 20 1 19 1 18 1 1 1 3 1 2 1 4 1 5 1 6 1 7 1 8 1 9 Q.tà RM0. biella SM part.1 GR.M002.1 RM0. biella SM part.1 GR.M002.1 biella SM part.2 GR.M002.2 biella SM part.2 GR.M002.2 Codice IM.001 IM.003 IM.004 IM.005 IM.006 IM.007 IM.008 IM.009 IM.010 IM.011 IM.012 IM.013 IM.014 IM.015 IM.016 IM.017 Carrello otturatore cal.12 - cromato Spina biella Percussore Molla percussore Molla fermo manetta Punta fermo manetta Spina molla fermo manetta otturatore cal.12 Molla estrattore Estrattore cal12 Spina estrattore Molla inerziale otturatore perno rotazione testa di chiusura Spina fermo percussore manettino otturatore cromato O-ring fermo spina percussore

EXPLODED VIEW DIAGRAMPARTICOLARE

Trigger Assembly 12 Ga 3.5” valid for: ISY1228SMG IWR1228SMG BOLT GROUP 18i 12ga - 3.5" (A02) TRIGGER GROUP 18i 12ga 3.5

Pos. Q.tà Codice PARTICOLARE PRICE 1 1 IT.001 Sottoguardia TRIGGER GUARD 28,00 2 1 IT-002 Molla grilletto TRIGGER SPRING 2,00 3 1 930.T003N grilletto TRIGGER 13,00 4 1 IT.004 Molla sicura antiraffica SAFETY SPRING 2,00 5 1 IT.005 Guida molla sicura antiraffica DISCONNECTOR PLUNGER 2,00

4 6 1 IT.006 Dente antiraffica 2 DISCONNECTOR 6,90 7 1 IT.007 Perno sicura antiraffica SAFETY PLUNGER 3,00 8 1 IT.008 pulsante sicura SAFETY BOTTON 3,00 5 17 9 1 IT.009 Piolo sicura SAFETY PIN 3,00 10 1 IT.010 Molla sicura SAFETY SPRING 2,00 11 1 IT.011 Spina fermo molla sicura 8 SAFETY SPRING RETAINING PIN 2,00 15 12 1 IT.012 Molla leva sgancio cartuccia CARTRIDGE DROP LEVER SPRING 2,00 13 2 IT.013 Spina grilletto TRIGGER PIN 2,00 13 14 1 IT.014 molla cane HAMMER SPRING 2,00 3 15 1 IT.015 Guidamolla cane HAMMER SPRING CAPSULE 3,50 16 1 IT.016 Dente arresto otturatore BREECH BOLT LATCH 7,00 11 17 1 IT.017 perno dente arresto otturatore BREECH BOLT LATCH PIN 2,00 16 18 1 GR.T018 Elevatore super magnum SUPERMAGNUM CARRIER 18,00 19 1 IT.019 Molla elevatore 10 CARRIER SPRING 2,00 20 1 IT.020 Guidamolla elevatore CARRIER SPRING PLUNGER 3,00 1 21 1 IT.021 Cane HAMMER 8,00

14 22 1 IT.022B Leva fermo cartuccia CARTRIDGE DROP LEVER 7,00 23 1 IT.023 bussola cane

7 HAMMER BUSH 4,00 24 1 IT.024 Molla spina sottoguardia TRIGGER GUARD PIN SPRING 2,00 9 25 1 IT.025 Spina sottoguardia TRIGGER GUARD PIN 2,00 6 12

32 PARTS LIST Trigger Assembly 12 Ga 3.5”

TRIGGER GROUP 18i 12ga 3.5

Pos. Q.tàTRIGGER GROUP 18i 12ga 3.5 Codice PARTICOLARE TRIGGER GROUP 18i 12ga 3.5PRICE 1 1 IT.001 Sottoguardia TRIGGER GUARD 28,00 2 1 IT-002 Molla grilletto TRIGGER SPRING 2,00 Pos. Q.tà Codice 3 1 930.T003N grilletto PARTICOLARE Pos. Q.tà Codice PRICETRIGGERPARTICOLARE 13,00 PRICE 1 1 IT.001 Sottoguardia 4 1 IT.004 Molla sicura antiraffica 1 1 IT.001 SottoguardiaTRIGGER GUARD SAFETY SPRING28,00 2,00 TRIGGER GUARD 28,00 2 1 IT-002 Molla grilletto 5 1 IT.005 Guida molla sicura antiraffica 2 1 IT-002 Molla grillettoTRIGGER SPRING DISCONNECTOR PLUNGER2,00 2,00 TRIGGER SPRING 2,00 3 1 930.T003N grilletto 6 1 IT.006 Dente antiraffica 3 1 930.T003N grillettoTRIGGER DISCONNECTOR 13,00 6,90 TRIGGER 13,00 4 1 IT.004 Molla sicura antiraffica7 1 IT.007 Perno sicura antiraffica 4 1 IT.004 Molla sicuraSAFETY SPRING antiraffica SAFETY PLUNGER2,00 3,00 SAFETY SPRING 2,00 5 1 IT.005 Guida molla sicura 8antiraffica 1 IT.008 pulsante sicura 5 1 IT.005 Guida mollaDISCONNECTOR PLUNGER sicura antiraffica SAFETY BOTTON2,00 3,00 DISCONNECTOR PLUNGER 2,00 6 1 IT.006 Dente antiraffica 9 1 IT.009 Piolo sicura 6 1 IT.006 Dente antirafficaDISCONNECTOR SAFETY PIN6,90 3,00 DISCONNECTOR 6,90 7 1 IT.007 Perno sicura antiraffica10 1 IT.010 Molla sicura 7 1 IT.007 Perno sicuraSAFETY PLUNGER antiraffica SAFETY SPRING3,00 2,00 SAFETY PLUNGER 3,00 8 1 IT.008 pulsante sicura 11 1 IT.011 Spina fermo molla sicura 8 1 IT.008 pulsanteSAFETY BOTTON sicura SAFETY SPRING RETAINING PIN3,00 2,00 SAFETY BOTTON 3,00 9 1 IT.009 Piolo sicura 12 1 IT.012 Molla leva sgancio cartuccia9 1 IT.009 Piolo sicuraSAFETY PIN CARTRIDGE DROP LEVER SPRING3,00 2,00 SAFETY PIN 3,00 10 1 IT.010 Molla sicura 13 2 IT.013 Spina grilletto 10 1 IT.010 Molla sicuraSAFETY SPRING TRIGGER PIN2,00 2,00 SAFETY SPRING 2,00 11 1 IT.011 Spina fermo molla 14sicura 1 IT.014 molla cane 11 1 IT.011 Spina fermoSAFETY SPRING RETAINING PIN molla sicura HAMMER SPRING2,00 2,00 SAFETY SPRING RETAINING PIN 2,00 12 1 IT.012 Molla leva sgancio15 cartuccia 1 IT.015 Guidamolla cane 12 1 IT.012 Molla levaCARTRIDGE DROP LEVER SPRING sgancio cartuccia HAMMER SPRING CAPSULE2,00 3,50 CARTRIDGE DROP LEVER SPRING 2,00 13 2 IT.013 Spina grilletto 16 1 IT.016 Dente arresto otturatore 13 2 IT.013 Spina grillettoTRIGGER PIN BREECH BOLT LATCH2,00 7,00 TRIGGER PIN 2,00 14 1 IT.014 molla cane 17 1 IT.017 perno dente arresto otturatore14 1 IT.014 molla caneHAMMER SPRING BREECH BOLT LATCH PIN2,00 2,00 HAMMER SPRING 2,00 15 1 IT.015 Guidamolla cane 18 1 GR.T018 Elevatore super magnum 15 1 IT.015 GuidamollaHAMMER SPRING CAPSULE cane SUPERMAGNUM CARRIER3,50 18,00 HAMMER SPRING CAPSULE 3,50 16 1 IT.016 Dente arresto otturatore19 1 IT.019 Molla elevatore 16 1 IT.016 Dente arrestoBREECH BOLT LATCH otturatore CARRIER SPRING7,00 2,00 BREECH BOLT LATCH 7,00 17 1 IT.017 perno dente arresto20 1otturatore IT.020 Guidamolla elevatore 17 1 IT.017 perno denteBREECH BOLT LATCH PIN arresto otturatore CARRIER SPRING PLUNGER2,00 3,00 BREECH BOLT LATCH PIN 2,00 18 1 GR.T018 Elevatore super 21magnum 1 IT.021 Cane 18 1 GR.T018 ElevatoreSUPERMAGNUM CARRIER super magnum HAMMER18,00 8,00 SUPERMAGNUM CARRIER 18,00 19 1 IT.019 Molla elevatore 22 1 IT.022B Leva fermo cartuccia 19 1 IT.019 Molla elevatoreCARRIER SPRING CARTRIDGE DROP LEVER 2,00 7,00 CARRIER SPRING 2,00 20 1 IT.020 Guidamolla elevatore23 1 IT.023 bussola cane 20 1 IT.020 GuidamollaCARRIER SPRING PLUNGER elevatore HAMMER BUSH3,00 4,00 CARRIER SPRING PLUNGER 3,00 21 1 IT.021 Cane 24 1 IT.024 Molla spina sottoguardia 21 1 IT.021 Cane HAMMER TRIGGER GUARD PIN SPRING8,00 2,00 HAMMER 8,00 22 1 IT.022B Leva fermo cartuccia25 1 IT.025 Spina sottoguardia 22 1 IT.022B Leva fermoCARTRIDGE DROP LEVER cartuccia TRIGGER GUARD PIN7,00 2,00 CARTRIDGE DROP LEVER 7,00 23 1 IT.023 bussola cane 23 1 IT.023 bussola HAMMER BUSHcane 4,00 HAMMER BUSH 4,00 24 1 IT.024 Molla spina sottoguardia 24 1 IT.024 Molla spinaTRIGGER GUARD PIN SPRING sottoguardia 2,00 TRIGGER GUARD PIN SPRING 2,00 25 1 IT.025 Spina sottoguardia 25 1 IT.025 Spina sottoguardiaTRIGGER GUARD PIN 2,00 TRIGGER GUARD PIN 2,00

33 Pos. 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 10 19 18 17 16 15 14 13 12 11 9 8 7 6 5 4 3 2 1 Q.tà 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 IT.003B (930.T003) WBY1276.G001 WBY12.E002 SA12.G006 930.MF10R 1M.002L.1 1000.68.0 IR.003.4C 930.D019 ID.002.1 ID.007.1 TAC009 TAC002 TAC011 TAC003 TAC004 TAC001 TAC010 Codice 001.71.I IG.003I 2D.005 IT.022B IT.018B IM.017 IM.016 IM.015 IM.014 IM.013 IM.012 IM.011 IM.010 IM.009 IM.008 IM.007 IM.006 IM.005 IM.004 IM.003 IM.001 90.124 90.123 IG.002 IG.004 ID.013 ID.006 ID.010 ID.009 ID.008 ID.004 IN.008 IN.007 IN.009 IN.005 IN.006 IN.004 IR.004 IE.009 IT-002 IT.025 IT.024 IT.023 IT.020 IT.019 IT.017 IT.016 IT.015 IT.013 IT.012 IT.011 IT.010 IT.009 IT.008 IT.007 IT.006 IT.005 IT.004 IT.001 IT.026 IT.021 IT.014 Leva com. f.c. / Cartridge drop lever - cal 12 gauge Astina / Forend Tenone grande - LAVORATO Spina sottoguardia Molla spina sottoguardia bussola cane Guidamolla elevatore Molla elevatore Elevatore Breda - lavorato Molla grilletto perno dente arresto otturatore Dente arresto otturatore Guidamolla cane Spina grilletto Molla leva sgancio cartuccia Spina fermo molla sicura Molla sicura Piolo sicura pulsante sicura Perno sicura antiraffica Dente antiraffica Guida molla sicura antiraffica Molla sicura antiraffica grilletto - trigger Sottoguardia O-ring fermo spina percussore manettino otturatore cromato Spina fermo percussore perno rotazione testa di chiusura Molla inerziale otturatore Spina estrattore Estrattore cal12 Molla estrattore otturatore cal.12 Spina molla fermo manetta Punta fermo manetta Molla fermo manetta Molla percussore Percussore Spina biella Carrello otturatore cal.12 - cromato Piastrina regolazione calcio Portacinta Piastrina ritegno molla elevatore Cane molla cane ( fornita da Cd.Europe ) biella lamellare part.1 965 M5X25 Vite TSP impr. croce zincata UNI 7688 – ISO 7046 DIN calciolo microcell Vite portacinta Molla espulsore Spina espulsore Spina ritegno molla espulsore Porta espulsore - Cartridge ejector Rivetto anteriore espulsore mirino LPA - MF10R Culatta Molla piastrina sgancio otturatore Spina leva com.fc. Ø2.5 x 22 DIN 7343 - UNI6875 Pulsante leva ferma cartucce - carrier latch button Leva ferma cartucce Magazine reducer Magazine spring cup / Tappo tubo serbatoio Molla tubo serbatoio 4 colpi Spingi cartuccia Tappo Asta rondella piana UNI 6592-DIN 125A - M4 vite testa bomb imp a croce DIN7985 - M4x6 Anello di battuta tenone Tubo magazzino anello centraggio asta TACTICAL cal.12 Molla carrello otturatore Massa con sede ammortizzatore ( cal. 20 ) Dado ISO 8673-M8x1 rondella grower DIN127-B M8 Rondella vite tirante M8 - UNI 6593 ISO 7093 DIN 9021 Piastrina fissaggio calcio vite tirante tubo calcio - magnum Tubo calcio carcassa_WBY-MK1_cal12-76 LAYOUT INCISIONI PARTICOLARE

EXPLODED VIEW DIAGRAM

General Assembly 12 Ga 3”

valid for: ID21228MAG 18i 12ga - 3" (A00) 37 7 36 5 6 35 34 4 2 3 33 10 32 9 A01 130 31 8 1 29 25 26 42 23 22 24 A02 11 827 18 38 12 19 13 20 415 14 21 28 16 17

34 PARTS LIST General Assembly 12 Ga 3”

18i 12ga 3" EXPLODED VIEW18i 12ga 3" EXPLODED VIEW

Pos.Pos. Q.tà Q.tà Codice Codice PARTICOLAREPARTICOLARE PRICEPRICE 11 1 1 WBY1276.G001.N WBY1276.G001.N carcassa carcassa RECEIVERRECEIVER NOTNOT AVAILABLE AVAILABLE 22 1 1 1000.54/ 1000.54/ Tubo Tubo calcio calcio STOCK TUBESTOCK TUBE 19,0019,00 33 1 1 ID.007.1 ID.007.1 vite vite tirante tirante tubo tubo calcio calcio - magnum - magnum STOCK RETAINING NUT SCREWSTOCK RETAINING NUT SCREW 6,006,00 44 1 1 1000.68.0 1000.68.0 Piastrina Piastrina fissaggio fissaggio calcio calcio STOCK LOCKING PLATESTOCK LOCKING PLATE 4,804,80 55 1 1 ID.008ID.008 Rondella Rondella vite vite tirante tirante LOCKING PLATELOCKING PLATE 2,002,00 66 1 1 ID.009ID.009 rondella rondella grower grower DIN127-B DIN127-B M8 M8 ELASTIC WASHERELASTIC WASHER 2,002,00 77 1 1 ID.010ID.010 Dado Dado ISO ISO 8673-M8x1 8673-M8x1 STOCK RETAINING NUT STOCK RETAINING NUT 2,002,00 88 1 1 2D.0052D.005 Massa Massa con con sede sede ammortizzatore ammortizzatore RECOIL SPRING PLUNGERRECOIL SPRING PLUNGER 10,0010,00 99 1 1 GR.D011 GR.D011 POSIZIONATORI POSIZIONATORI HALDER HALDER 1010 1 1 930.D006 930.D006 Molla Molla carrello carrello otturatore otturatore STOCK TUBE SPRINGSTOCK TUBE SPRING 6,006,00 1111 1 1 TAC010.I TAC010.I anello anello centraggio centraggio asta asta TACTICAL TACTICAL cal.12 cal.12 FOREND CENTERING RINGFOREND CENTERING RING 3,003,00 1212 1 1 TAC001TAC001 Tubo Tubo SERBATOIO SERBATOIO MAGAZINE TUBE MAGAZINE TUBE 22,0022,00 1313 1 1 TAC004TAC004 Anello Anello di dibattuta battuta tenone tenone MAGAZINE TUBE RING AGAINST BARREL NUT (TO BE GLUED) MAGAZINE TUBE RING AGAINST BARREL NUT (TO BE GLUED) 3,003,00 1414 1 1 IE.007IE.007 vite vite testa testa bomb bomb imp imp a acroce croce 1515 1 1 IE.009IE.009 rondella rondella piana piana 1616 1 1 WBY12.E002.L WBY12.E002.L Tappo Tappo Asta Asta FOREND CAPFOREND CAP 15,0015,00 1717 1 1 9012490124 porta porta cinghia cinghia 1818 1 1 IR.004IR.004 Spingi Spingi cartuccia cartuccia MAGAZINE FOLLOWERMAGAZINE FOLLOWER 3,003,00 1919 1 1 IR.0034C IR.0034C Molla Molla tubo tubo serbatoio serbatoio 4 colpi4 colpi Magazine spring Magazine spring 5,005,00 2020 1 1 TAC003TAC003 Tappo Tappo tubo tubo serbatoio serbatoio MagazineMagazine spring spring cup cup 3,003,00 2121 1 1 TAC011.2P TAC011.2P Magazine Magazine reducer reducer MAGAZINE REDUCERMAGAZINE REDUCER 2,002,00 2222 1 1 IG.003IIG.003I Leva Leva ferma ferma cartucce cartucce 2323 1 1 SA12.G006 SA12.G006 Pulsante Pulsante leva leva ferma ferma cartucce cartucce - - carrier latch buttoncarrier latch button 31,0031,00 2424 2 2 IG.004IG.004 Spina Spina leva leva com.fc. com.fc. 2525 1 1 IG.002IG.002 Molla Molla piastrina piastrina sgancio sgancio otturatore otturatore 2626 1 1 IN.004.B IN.004.B Culatta Culatta BREECHBREECH 65,0065,00 2727 1 1 WBY.001.70T WBY.001.70T canna canna 28" 28" BARRELBARREL 180,00180,00 2828 1 1 930.MF10R 930.MF10R mirino mirino LPA LPA - MF10R - MF10R FRONT SIGHTFRONT SIGHT 6,006,00 2929 1 1 2N.0062N.006 Rivetto Rivetto anteriore anteriore espulsore espulsore 3030 1 1 IN.005IN.005 Porta Porta espulsore espulsore - - Cartridge ejectorCartridge ejector 8,008,00 3131 1 1 IN.009IN.009 Spina Spina ritegno ritegno molla molla espulsore espulsore 3232 1 1 IN.007IN.007 Spina Spina espulsore espulsore 3333 1 1 IN.008IN.008 Molla Molla espulsore espulsore 3434 1 1 WBY12.D001.SF WBY12.D001.SF calcio calcio SF SF STOCKSTOCK 136,00136,00 3535 1 1 90.12390.123 Vite Vite portacinta portacinta SLING SWIVELSLING SWIVEL 6,006,00 3636 1 1 ID.002.1 ID.002.1 calciolo calciolo microcell microcell BUTT PLATEBUTT PLATE 15,0015,00 ViteVite TSP TSP impr. impr. croce croce zincata zincata 3737 2 2 930.D019 930.D019 965965 M5X25 M5X25 RECOIL PAD SCREWRECOIL PAD SCREW 1,501,50 3838 1 1 WBY12.E001.SF WBY12.E001.SF asta asta SF SF FOREND FOREND 70,0070,00

35 Pos. 01 10 11 11 21 12 31 13 41 14 51 15 61 16 71 17 1 1 1 3 1 2 1 4 1 5 1 6 1 7 1 8 1 9 Q.tà 1M.002L.1 Codice IM.001 IM.003 IM.004 IM.005 IM.006 IM.007 IM.008 IM.009 IM.010 IM.011 IM.012 IM.013 IM.014 IM.015 IM.016 IM.017 biella lamellare part.1 Carrello otturatore cal.12 - cromato Spina biella Percussore Molla percussore Molla fermo manetta Punta fermo manetta Spina molla fermo manetta otturatore cal.12 Molla estrattore Estrattore cal12 Spina estrattore Molla inerziale otturatore perno rotazione testa di chiusura Spina fermo percussore manettino otturatore cromato O-ring fermo spina percussore PARTICOLARE

EXPLODED VIEW DIAGRAM

Bolt Assembly 12 Ga 3”

valid for: ID21228MAG BOLT GROUP 18i 12ga - 3" (A02) 4 2 5 17 8 15 13 3 11 16 10 1 14 7 9 6 12

36 PARTS LIST Bolt Assembly 12 Ga 3”

BOLT GROUP 18i 12ga 3"

Pos. Q.tà Codice PARTICOLARE PRICE BOLT GROUP 18i 12ga 3"1 1 IM.001 Carrello otturatore cal.12 - cromatoBOLT GROUP 18i 12ga 3"BOLT CARRIAGE CHROMED 60,00 2 1 IM.002L biella BOLT - LINK 13,00 Pos. Q.tà Codice 3PARTICOLARE 1 IM.003 SpinaPos. biella Q.tà Codice PARTICOLAREPRICEBOLT LINK PIN 2,00 PRICE 4 1 IM.004 Percussore FIRING PIN 9,50 1 1 IM.001 Carrello otturatore cal.12 - cromato1 1BOLT CARRIAGE CHROMED IM.001 Carrello otturatore cal.1260,00 - cromato BOLT CARRIAGE CHROMED 60,00 5 1 IM.005 Molla percussore FIRING PIN SPRING 2,00 2 1 IM.002L biella 2 1BOLT - LINK IM.002L biella 13,00 BOLT - LINK 13,00 6 1 IM.006 Molla fermo manetta BOLT HANDLE RATAINING SPRING 1,00 3 1 IM.003 Spina biella 3 1BOLT LINK PIN IM.003 Spina biella 2,00 BOLT LINK PIN 2,00 7 1 IM.007 Punta fermo manetta BOLT HANDLE PIN 1,00 4 1 IM.004 Percussore 4 1FIRING PIN IM.004 Percussore 9,50 FIRING PIN 9,50 BOLT HANDLE SPRING RETAINING PIN 2,00 5 1 IM.005 Molla percussore8 1 IM.008 Spina5 molla 1 fermoFIRING PIN SPRING IM.005 manetta Molla percussore 2,00 FIRING PIN SPRING 2,00 6 1 IM.006 Molla fermo9 manetta 1 IM.009 testina6 otturatore 1BOLT HANDLE RATAINING SPRING IM.006 cal.12 Molla fermo manettaLOCKING HEAD1,00 BOLT HANDLE RATAINING SPRING20,00 1,00 7 1 IM.007 Punta fermo10 manetta 1 IM.010 Molla7 estrattore 1BOLT HANDLE PIN IM.007 Punta fermo manettaEXTRACTOR SPRING1,00 BOLT HANDLE PIN2,00 1,00 8 1 IM.008 Spina molla11 fermo 1 manetta IM.011 Estrattore8 1 cal12BOLT HANDLE SPRING RETAINING PIN IM.008 Spina molla fermo manettaEXTRACTOR 2,00 BOLT HANDLE SPRING RETAINING PIN6,00 2,00 SXTRACTOR PIN 2,00 9 1 IM.009 testina otturatore12 1 cal.12 IM.012 Spina9 estrattore 1LOCKING HEAD IM.009 testina otturatore cal.1220,00 LOCKING HEAD 20,00 10 1 IM.010 Molla estrattore13 1 IM.013 Molla10 inerziale 1EXTRACTOR SPRING IM.010otturatore Molla estrattore BOLT INERTIAL SPRING2,00 EXTRACTOR SPRING7,00 2,00 11 1 IM.011 Estrattore14 cal12 1 IM.014 perno11 rotazione 1EXTRACTOR IM.011 testa di Estrattorechiusura cal12 LOCKING HEAD ROTATION PIN6,00 EXTRACTOR 5,00 6,00 12 1 IM.012 Spina estrattore15 1 IM.015 Spina12 fermo 1 percussoreSXTRACTOR PIN IM.012 Spina estrattore FIRING RETAINING PIN2,00 SXTRACTOR PIN2,00 2,00 16 1 IM.016 manettino otturatore cromato BOLT HANDLE 9,00 13 1 IM.013 Molla inerziale otturatore 13 1BOLT INERTIAL SPRING IM.013 Molla inerziale otturatore7,00 BOLT INERTIAL SPRING 7,00 17 1 IM.017 O-ring fermo spina percussore O -RING 2,00 14 1 IM.014 perno rotazione testa di chiusura14 1LOCKING HEAD ROTATION PIN IM.014 perno rotazione testa di5,00 chiusura LOCKING HEAD ROTATION PIN 5,00 15 1 IM.015 Spina fermo percussore 15 1FIRING RETAINING PIN IM.015 Spina fermo percussore2,00 FIRING RETAINING PIN 2,00 16 1 IM.016 manettino otturatore cromato 16 1BOLT HANDLE IM.016 manettino otturatore cromato9,00 BOLT HANDLE 9,00 17 1 IM.017 O-ring fermo spina percussore 17 1O -RING IM.017 O-ring fermo spina percussore2,00 O -RING 2,00

37

Pos.

71 17

61 16

51 15

41 14

31 13

21 12

11 11

01 10

1 9

1 8

1 7

1 6

1 5

1 4

1 3

1 2

1 1

Q.tà

1M.002L.1

Codice

IM.017

IM.016

IM.015

IM.014

IM.013

IM.012

IM.011

IM.010

IM.009

IM.008

IM.007

IM.006

IM.005

IM.004

IM.003

IM.001

O-ring fermo spina percussore percussore spina fermo O-ring

manettino otturatore cromato otturatore manettino

Spina fermo percussore fermo Spina

perno rotazione testa di chiusura di testa rotazione perno

Molla inerziale otturatore inerziale Molla

Spina estrattore Spina

Estrattore cal12 Estrattore

Molla estrattore Molla

otturatore cal.12 otturatore

Spina molla fermo manetta fermo molla Spina

Punta fermo manetta fermo Punta

Molla fermo manetta fermo Molla

Molla percussore Molla

Percussore

Spina biella Spina

biella lamellare part.1 lamellare biella

Carrello otturatore cal.12 - cromato - cal.12 otturatore Carrello PARTICOLARE

EXPLODED VIEW DIAGRAM

Trigger Assembly 12 Ga 3”

valid for: ID21228MAG for: valid

BOLT GROUP 18i 12ga - 3" (A02) 3" - 12ga 18i GROUP BOLT

4

2

5

17

8

15

13

3

11

16

10

1

14

7

9

6 12

38 PARTS LIST Trigger Assembly 12 Ga 3”

BOLT GROUP 18i 12ga 3"BOLT GROUP 18i 12ga 3"BOLT GROUP 18i 12ga 3"

Pos. Q.tà Codice Pos. Q.tàPARTICOLARE Codice Pos. Q.tàPARTICOLARE Codice PARTICOLAREPRICE PRICE PRICE 1 1 IM.001 Carrello1 otturatore 1 IM.001 cal.12 - cromato Carrello1 otturatore 1 IM.001BOLT CARRIAGE CHROMED cal.12 Carrello- cromato otturatoreBOLT CARRIAGE CHROMED cal.1260,00 - cromato BOLT CARRIAGE CHROMED60,00 60,00 2 1 IM.002L biella 2 1 IM.002L biella2 1 IM.002LBOLT - LINK biella BOLT - LINK13,00 BOLT - LINK13,00 13,00 3 1 IM.003 Spina 3biella 1 IM.003 Spina3 biella 1 IM.003BOLT LINK PIN Spina biella BOLT LINK PIN2,00 BOLT LINK PIN2,00 2,00 4 1 IM.004 Percussore4 1 IM.004 Percussore4 1 IM.004FIRING PIN Percussore FIRING PIN9,50 FIRING PIN 9,50 9,50 5 1 IM.005 Molla 5percussore 1 IM.005 Molla5 percussore 1 IM.005FIRING PIN SPRING Molla percussore FIRING PIN SPRING2,00 FIRING PIN SPRING2,00 2,00 6 1 IM.006 Molla 6fermo 1manetta IM.006 Molla6 fermo 1 manetta IM.006BOLT HANDLE RATAINING SPRING Molla fermo manettaBOLT HANDLE RATAINING SPRING1,00 BOLT HANDLE RATAINING SPRING1,00 1,00 7 1 IM.007 Punta 7fermo 1 manetta IM.007 Punta7 fermo 1 manetta IM.007BOLT HANDLE PIN Punta fermo manettaBOLT HANDLE PIN1,00 BOLT HANDLE PIN1,00 1,00 8 1 IM.008 Spina 8molla 1fermo IM.008manetta Spina8 molla 1 fermo IM.008BOLT HANDLE SPRING RETAINING PIN manetta Spina molla fermo BOLT HANDLE SPRING RETAINING PINmanetta2,00 BOLT HANDLE SPRING RETAINING PIN2,00 2,00 9 1 IM.009 testina9 otturatore 1 cal.12 IM.009 testina9 otturatore 1 IM.009LOCKING HEAD cal.12 testina otturatore cal.12LOCKING HEAD20,00 LOCKING HEAD20,00 20,00 10 1 IM.010 Molla10 estrattore 1 IM.010 Molla10 estrattore 1 IM.010EXTRACTOR SPRING Molla estrattore EXTRACTOR SPRING2,00 EXTRACTOR SPRING2,00 2,00 11 1 IM.011 Estrattore11 cal12 1 IM.011 Estrattore11 1cal12 IM.011EXTRACTOR Estrattore cal12 EXTRACTOR 6,00 EXTRACTOR 6,00 6,00 12 1 IM.012 Spina12 estrattore 1 IM.012 Spina12 estrattore 1 IM.012SXTRACTOR PIN Spina estrattore SXTRACTOR PIN2,00 SXTRACTOR PIN2,00 2,00 13 1 IM.013 Molla13 inerziale 1 otturatore IM.013 Molla13 inerziale 1 otturatore IM.013BOLT INERTIAL SPRING Molla inerziale otturatoreBOLT INERTIAL SPRING7,00 BOLT INERTIAL SPRING7,00 7,00 14 1 IM.014 perno14 rotazione 1 testa IM.014 di chiusura perno14 rotazione 1 IM.014LOCKING HEAD ROTATION PINtesta di chiusura perno rotazione testaLOCKING HEAD ROTATION PIN di 5,00chiusura LOCKING HEAD ROTATION PIN5,00 5,00 15 1 IM.015 Spina15 fermo 1 percussore IM.015 Spina15 fermo 1 percussore IM.015FIRING RETAINING PIN Spina fermo percussoreFIRING RETAINING PIN2,00 FIRING RETAINING PIN2,00 2,00 16 1 IM.016 manettino16 otturatore 1 IM.016 cromato manettino16 1 otturatore IM.016BOLT HANDLE cromato manettino otturatoreBOLT HANDLE cromato9,00 BOLT HANDLE9,00 9,00 17 1 IM.017 O-ring17 fermo 1 spina IM.017 percussore O-ring 17 fermo 1 spina IM.017O -RING percussore O-ring fermo spinaO -RING percussore2,00 O -RING 2,00 2,00

39 Pos. 01 10 51 1 15 1 14 1 13 1 12 11 61 16 71 17 01 1 20 1 19 18 11 21 21 22 41 24 31 23 51 25 61 26 71 27 91 1 29 28 01 30 11 31 21 32 31 33 72 37 1 36 51 1 35 34 81 38 91 39 21 1 42 1 41 40 31 43 41 44 51 1 55 1 54 1 53 1 52 51 01 1 50 1 49 1 48 1 47 46 51 45 61 56 71 57 81 58 91 59 11 2 61 60 21 62 31 63 91 1 69 1 68 1 67 1 66 1 65 64 11 1 71 70 21 72 31 73 41 74 51 75 61 76 71 77 82 78 91 79 02 80 11 81 21 82 31 83 41 84 51 85 61 86 91 1 89 1 88 87 1 1 1 2 1 1 4 3 1 5 1 6 1 7 1 1 9 8 Q.tà IT.003B (930.T003) WBY2076.2G001 WBY20.E002 WBY20.E115 SA12.G006 930.MF10R 2N-001.76 1000.68.0 1000.70.1 1000.70.2 1000.70.3 1000.70.4 930.D019 2D.005.L ID.007.1 ID.002.1 2N-001T Codice 2M-003 2M-005 2M-013 OR.001 2M.016 2M.014 2M.011 2M.010 2M.009 2M.004 2M.001 2N-009 2N-006 IG.003I 2D.006 2N.004 2R.004 2R.001 2R.002 2R.006 2R.003 2R.005 IT.026B IM.017 IM.015 IM.008 IM.007 IM.006 IG.004 IG.002 90.123 90.124 IM.102 2T-023 2T-001 ID.004 ID.008 ID.009 ID.010 2T.014 IN.005 2T.018 2T.019 IN.007 2T.022 IN.008 2T.025 IE.004 IE.005 IT.002 IT.004 IT.005 IT.006 IT.007 IT.008 IT.009 IT.010 IT.011 IT.012 IT.013 IT.015 IT.016 IT.017 IT.020 IT.021 IT.024 CARCASSA vite tirante tubo calcio - magnum Tubo calcio Piastrina fissaggio calcio Rondella vite tirante M8 - UNI 6593 ISO 7093 DIN 9021 rondella grower DIN127-B M8 Massa con sede ammortizzatore (alleggerita per cal. 20 ) Dado ISO 8673-M8x1 Rivetto post. supp. estrattore Rivetto ant. supp. estrattore vite testa bomb imp a croce DIN7985 - M4x6 Molla tubo calcio Boccola spingi cartuccia / magazine follower Tubo serbatoio 4C Tappo astina Perno tubo serbatoio / Magazine spring cup magaz. spring cup Inserto asta Pulsante leva ferma cartucce - carrier latch button Leva ferma cartucce Spina leva com.fc. Ø2.5 x 22 DIN 7343 - UNI6875 Molla piastrina sgancio otturatore Molla tubo serbatoio mirino LPA - MF10R Astina riduttore / Magazine reducer Culatta / Breech Canna / Barrel Molla tappo asta inserto asta calciolo microcell Vite portacinta Porta espulsore - Cartridge ejector M5X25 Vite TSP impr. croce zincata UNI 7688 – ISO 7046 DIN 965 Spina espulsore o-ring Ø3.5x1 NBR 70Sh Molla espulsore Spina biella Molla percussore / Firing pin spring Boccola cane Sottoguardia Tenone lavorato Manettino otturatore cal20 Pin testa rotante Estrattore - Extractor Molla estrattore / Extractor spring otturatore cal 20 / Bolt g.20 Percussore / Firing pin Carrello / bolt carriage Molla inerziale / Inertial spring Molla cane Elavatore cal.20 - fresato Molla elevatore cal. 20 Leva com. f.c. / Cartridge drop lever - cal 20 gauge Portacinta Spina sottoguardia / Trigger guard pin Piolo antisvitamento tappo astina Grano ritegno molla piolo antisv. tappo asta O-ring fermo spina percussore Spina fermo percussore Spina molla fermo manetta Punta fermo manetta Molla fermo manetta Molla piolo antisv. tappo asta grilletto - trigger Molla grilletto Molla sicura antiraffica Guida molla sicura antiraffica Dente antiraffica Perno sicura antiraffica pulsante sicura Piolo sicura Molla sicura Spina fermo molla sicura Molla leva sgancio cartuccia Spina grilletto Guidamolla cane Dente arresto otturatore perno dente arresto otturatore Guidamolla elevatore Cane - hammer biella integrale cal.12 bindella ventilata 70 - cal20 mck WBY Piastrina appoggio molla dente arr. ott. / Spring tunner plate Molla spina sottoguardia PARTICOLARE

EXPLODED VIEW DIAGRAM

General Assembly 20 Ga 3”

valid for: ID22026MAG ID22028MAG 18i 20ga - 3" (A00) 7 6 5 3637 4 10 34 3 35 9 14 8 2 A01 3839 1 25 3313 224 22 29 A02 23 32 15 41 16 30 040 20 26 17 21 27 181231 28 19

40 PARTS LIST General Assembly 20 Ga 3”

18i 20ga 3"_EXPLODED VIEW Pos. Q.tà Codice PARTICOLARE18i 20ga 3"_EXPLODED VIEW18i 20ga 3"_EXPLODED VIEW PRICE 1 1 WBY2076.2G001.N CARCASSA RECEIVER Cannot be Sold separately 2 1 Pos.Pos. Q.tà1000.54/ Q.tà Codice Codice Tubo calcio PARTICOLAREPARTICOLARE SOTCK TUBE 19PRICEPRICE CannotCannot be Sold be Sold separately separately 3 1 11 1ID.007.1 1 WBY2076.2G001.N WBY2076.2G001.N vite tirante tubo CARCASSA CARCASSA calcio - magnum STOCK RETAINING NUT SCREWRECEIVERRECEIVER 6 4 1 22 11000.68.0 1 1000.54/1000.54/ Piastrina fissaggio Tubo Tubo calcio calcio calcio STOCK LOCKING PLATESOTCK TUBESOTCK TUBE 4,8 19 19 5 1 33 1 ID.008 1 ID.007.1ID.007.1Rondella vite vite tirante vite tirante tirante tubo tubo calcio calcio - magnum - magnumSPACER STOCK NUT SCREWSTOCK RETAINING NUT SCREWSTOCK RETAINING NUT SCREW 2 6 6 6 1 44 1 ID.009 1 1000.68.01000.68.0rondella grower Piastrina Piastrina DIN127-B fissaggio fissaggio M8 calcio calcio ELASTIC WASHER STOCK LOCKING PLATESTOCK LOCKING PLATE 2 4,8 4,8 7 1 55 1 ID.010 1 ID.008ID.008Dado ISO 8673-M8x1RondellaRondella vite vite tirante tirante STOCK RETAINING NUT SPACER STOCK NUT SCREWSPACER STOCK NUT SCREW 2 2 2 66 1 1 ID.009ID.009 rondellarondella grower grower DIN127-B DIN127-B M8 M8 ELASTIC WASHERELASTIC WASHER 2 2 8 1 2D.005.L Massa con sede ammortizzatore RECOIL SPRING PLUNGER 10 9 1 77 1GR.D011 1 ID.010ID.010 POSIZIONATORIDadoDado HALDER ISO ISO 8673-M8x1 H22060.0108 8673-M8x1 STOCK RETAINING NUT STOCK RETAINING NUT 2 2 88 1 1 2D.005.L2D.005.L Massa Massa con con sede sede ammortizzatore ammortizzatore RECOIL SPRING PLUNGERRECOIL SPRING PLUNGER 10 10 10 1 2D.006 Molla tubo calcio STOCK TUBE SPRING 6 15 1 99 1 2R.004 1 GR.D011GR.D011 Boccola spingi POSIZIONATORI POSIZIONATORIcartuccia HALDER HALDER H22060.0108 H22060.0108magazine follower 3 16 1 1010 1 2R.001 1 2D.0062D.006 Tubo serbatoio Molla Molla 4C tubo tubo calcio calcio MAGAZINE TUBE STOCK TUBE SPRINGSTOCK TUBE SPRING 22 6 6 17 1 1515 1 2R.002 1 2R.0042R.004 Tappo tubo Boccolaserbatoio Boccola spingi spingi cartuccia cartuccia MAGAZINE TUBE CAPmagazine followermagazine follower 5 3 3 12 1 1616 1 IE.007 1 2R.0012R.001vite testa bomb Tubo Tubo imp serbatoio serbatoio a croce 4C 4C MAGAZINE TUBEMAGAZINE TUBE 22 22 MAGAZINE TUBE CAPMAGAZINE TUBE CAP 5 5 18 11717 WBY20.E002.L 1 1 2R.0022R.002 Tappo astina Tappo Tappo tubo tubo serbatoio serbatoio FOR END LOCK CAP 15 19 1 1212 1 IE.008 1 IE.007IE.007base porta cinghiavitevite testa testa bomb bomb imp imp a croce a croce STOCK SWIVEL 1818 1 1 WBY20.E002.L WBY20.E002.L Tappo Tappo astina astina FOR END LOCK CAPFOR END LOCK CAP 15 15 20 1 2R.006 SUPP.FISSAGGIO TAPPO ASTA magaz. spring cup 2 STOCK SWIVELSTOCK SWIVEL 21 1 1919 11000.70.1 1 IE.008IE.008 Inserto asta basebase porta porta cinghia cinghia WHOLE FOREND INSERT 4,8 22 1 2020 1 IG.003I 1 2R.0062R.006 Leva ferma SUPP.FISSAGGIOcartucceSUPP.FISSAGGIO TAPPO TAPPO ASTA ASTA magaz.magaz. spring spring cup cup 2 2 WHOLE FOREND INSERTWHOLE FOREND INSERT 4,8 4,8 23 12121 SA12.G006 1 1 1000.70.11000.70.1 Pulsante leva Inserto ferma Inserto asta cartucce asta - carrier latch 31 24 1 2222 1 IG.004 1 IG.003IIG.003I Spina leva com.fc. Leva Leva ferma ferma cartucce cartucce 25 1 2323 1IG.002 1 SA12.G006 SA12.G006 Molla leva ferma Pulsante Pulsante cartucce leva leva ferma ferma cartucce cartucce - - carrier latch carrier latch 31 31 2424 1 1 IG.004IG.004 Spina Spina leva leva com.fc. com.fc. 26 1 2R.003 Molla tubo serbatoio MAGAZINE SPRING 5 27 1 2525 1 2R.005 1 IG.002IG.002 Astina riduttore Molla Molla leva leva ferma ferma cartucce cartucce Magazine reducer 2 28 1 2626930.MF10R 1 1 2R.0032R.003 mirino LPA - MollaMF10R Molla tubo tubo serbatoio serbatoio FRONT SIGHT MAGAZINE SPRINGMAGAZINE SPRING 6 5 5 29 1 2727 12N.004.B 1 2R.0052R.005 Culatta / Breech Astina Astina riduttore riduttore BREECH Magazine reducer Magazine reducer 65 2 2 2828 1 1 930.MF10R930.MF10R mirino mirino LPA LPA - MF10R - MF10R FRONT SIGHTFRONT SIGHT 6 6 2929 1 1 2N.004.B2N.004.B Culatta Culatta / Breech / Breech BREECHBREECH 65 65 2WBY.66A2WBY.66A (26") (26") 2WBY.70A 2WBY.70A 3030 1 1 CannaCanna / Barrel / Barrel (28")(28") COMPLETE BARRELCOMPLETE BARREL 180 180 3131 1 1 IE.004IE.004 MollaMolla tappo tappo asta asta FOREND CAP SPRINGFOREND CAP SPRING 3,5 3,5 3232 1 1 IE.005IE.005 insertoinserto asta asta Cannot be changedCannot be changed 3333 1 1 IN.005IN.005 PortaPorta espulsore espulsore - - Cartridge ejectorCartridge ejector 8 8 3838 1 1 IN.007IN.007 SpinaSpina espulsore espulsore 3939 1 1 IN.008IN.008 MollaMolla espulsore espulsore 1313 1 1 2N.0062N.006 Rivetto Rivetto ant. ant.supp. supp. estrattore estrattore 1414 1 1 IN.009IN.009 RivettoRivetto post. post. supp. supp. estrattore estrattore 3434 1 1 WBY20.D001.SF WBY20.D001.SF calcio calcio STOCK STOCK 136 136 3535 1 1 90.12390.123 Vite Viteportacinta portacinta SLING SWIVEL SCREWSLING SWIVEL SCREW 4,5 4,5 3636 1 1 ID.002.1ID.002.1 calciolo calciolo microcell microcell BUTT PLATEBUTT PLATE 15 15 Vite ViteTSP impr.TSP impr. croce croce zincata zincata UNI 7688UNI 7688 – – 3737 2 2 930.D019930.D019 ISO 7046ISO 7046 – DIN – 965DIN 965M5X25 M5X25 RECOIL PAD SCREWRECOIL PAD SCREW 1,5 1,5 4040 1 1 OR.001OR.001 o-ring o-ring Ø3.5x1 Ø3.5x1 NBR NBR70Sh 70Sh ORINGORING 1 1 4141 1 1 WBY20.E001.SF WBY20.E001.SF asta asta FOR END FOR END 70 70

41 Pos. 71 1 17 1 16 1 15 1 14 13 21 1 12 1 11 10 1 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 Q.tà Codice 2M-013 2M-005 2M-003 2M.016 2M.014 2M.011 2M.010 2M.009 2M.004 2M.001 IM.017 IM.015 IM.008 IM.007 IM.006 IM.102 IT.011 O-ring fermo spina percussore Manettino otturatore cal20 Spina fermo percussore Pin testa rotante Molla inerziale / Inertial spring Spina fermo molla sicura Estrattore - Extractor Molla estrattore / Extractor spring otturatore cal 20 / Bolt g.20 Spina molla fermo manetta Punta fermo manetta Molla fermo manetta Molla percussore / Firing pin spring Percussore / Firing pin Spina biella biella integrale cal.12 Carrello / bolt carriage PARTICOLARE

EXPLODED VIEW DIAGRAM

Bolt Assembly 20 Ga 3”

valid for: ID22026MAG ID22028MAG BOLT GROUP 18i 20ga - 3" (A02) BOLT GROUP 18i 20ga 3"

Pos. Q.tà Codice PARTICOLARE PRICE 1 1 2M.001 Carrello / bolt carriage BOLT CARRIAGE 60,00 2 2 1 IM.002L biella integrale cal.12 BOLT - LINK 13,00 3 1 2M-003 Spina biella BOLT LINK PIN 2,00 715 17

5 4 1 2M.004 Percussore / Firing pin FIRING PIN 9,50 5 1 2M-005 Molla percussore / Firing pin spring FIRING PIN SPRING 2,00 6 1 IM.006 Molla fermo manetta BOLT HANDLE RATAINING SPRING 1,00 4 7 1 IM.007 Punta fermo manetta BOLT HANDLE PIN 1,00 3 8 1 2M.008 Spina molla fermo manetta BOLT HANDLE SPRING RETAINING PIN 2,00

1 9 1 2M.009 testina otturatore cal 20 / Bolt g.20 LOCKING HEAD 20,00 16 10 1 2M.010 Molla estrattore / Extractor spring EXTRACTOR SPRING 2,00

8 11 1 2M.011 Estrattore - Extractor EXTRACTOR 6,00 7 12 1 IG.007 Spina fermo estrattore c20 SXTRACTOR PIN 2,00 13 1 2M-013 Molla inerziale / Inertial spring BOLT INERTIAL SPRING 7,00 13

6 14 1 2M.014 Pin testa rotante LOCKING HEAD ROTATION PIN 5,00 15 1 IM.015 Spina fermo percussore FIRING RETAINING PIN 2,00 11 12 10 11 9 16 1 2M.016 Manettino otturatore cal20 BOLT HANDLE 9,00 17 1 IM.017 O-ring fermo spina percussore O -RING 2,00 14

42 PARTS LIST Bolt Assembly 20 Ga 3”

BOLT GROUP 18i 20ga 3"

Pos.BOLT GROUP 18i 20ga 3" Q.tà Codice PARTICOLARE BOLT GROUP 18i 20ga 3" PRICE 1 1 2M.001 Carrello / bolt carriage BOLT CARRIAGE 60,00 Pos. Q.tà Codice 2 1PARTICOLARE IM.002L biellaPos. integrale Q.tà Codice cal.12 PARTICOLAREBOLT - LINKPRICE 13,00 PRICE 1 1 2M.001 Carrello3 1/ bolt 2M-003carriage Spina1 biella 1 2M.001BOLT CARRIAGE Carrello / bolt carriageBOLT LINK PIN60,00 BOLT CARRIAGE2,00 60,00 2 1 IM.002L biella4 integrale 1 2M.004 cal.12 Percussore2 1 / Firing IM.002LBOLT - LINK pin biella integrale cal.12FIRING PIN 13,00 BOLT - LINK 9,50 13,00 3 1 2M-003 Spina5 biella 1 2M-005 Molla3 percussore 1 2M-003BOLT LINK PIN / Firing Spina pin springbiella FIRING PIN SPRING2,00 BOLT LINK PIN2,00 2,00 4 1 2M.004 Percussore6 1 / Firing IM.006 pin Molla4 fermo 1 manetta 2M.004FIRING PIN Percussore / FiringBOLT HANDLE RATAINING SPRING pin 9,50 FIRING PIN 1,00 9,50 5 1 2M-005 Molla7 percussore 1 IM.007 / Firing Punta 5pin springfermo 1 manetta 2M-005FIRING PIN SPRING Molla percussoreBOLT HANDLE PIN / Firing2,00 pin spring FIRING PIN SPRING1,00 2,00 6 1 IM.006 Molla8 fermo 1 manetta 2M.008 Spina6 molla 1 fermo IM.006BOLT HANDLE RATAINING SPRING manetta Molla fermo manettaBOLT HANDLE SPRING RETAINING PIN1,00 BOLT HANDLE RATAINING SPRING2,00 1,00 7 1 IM.007 Punta9 fermo 1 manetta 2M.009 testina7 otturatore 1 IM.007BOLT HANDLE PIN cal 20 Punta/ Bolt fermog.20 manettaLOCKING HEAD1,00 BOLT HANDLE PIN20,00 1,00 8 1 2M.008 Spina10 molla 1 fermo 2M.010 manetta Molla8 estrattore 1 2M.008 BOLT HANDLE SPRING RETAINING PIN/ Extractor Spina spring molla fermoEXTRACTOR SPRING manetta2,00 BOLT HANDLE SPRING RETAINING PIN2,00 2,00 9 1 2M.009 testina11 otturatore 1 2M.011 cal 20 Estrattore/ Bolt9 g.20 1 - Extractor 2M.009LOCKING HEAD testina otturatoreEXTRACTOR cal 2020,00 / Bolt g.20 LOCKING HEAD6,00 20,00 10 1 2M.010 Molla12 estrattore 1 IG.007 / Extractor Spina10 spring fermo 1 estrattore 2M.010EXTRACTOR SPRING c20 Molla estrattore SXTRACTOR PIN/ Extractor2,00 spring EXTRACTOR SPRING2,00 2,00 11 1 2M.011 Estrattore13 1 - Extractor 2M-013 Molla11 inerziale 1 2M.011/ EXTRACTOR Inertial spring Estrattore - ExtractorBOLT INERTIAL SPRING 6,00 EXTRACTOR 7,00 6,00 12 1 IG.007 Spina14 fermo 1 estrattore 2M.014 c20 Pin12 testa 1 rotante IG.007SXTRACTOR PIN Spina fermo estrattoreLOCKING HEAD ROTATION PIN c202,00 SXTRACTOR PIN5,00 2,00 13 1 2M-013 Molla15 inerziale 1 IM.015/ Inertial spring Spina13 fermo 1 percussore 2M-013BOLT INERTIAL SPRING Molla inerziale / FIRING RETAINING PINInertial spring7,00 BOLT INERTIAL SPRING2,00 7,00 14 1 2M.014 Pin16 testa 1 rotante 2M.016 Manettino14 1 otturatore 2M.014LOCKING HEAD ROTATION PIN cal20 Pin testa rotanteBOLT HANDLE5,00 LOCKING HEAD ROTATION PIN9,00 5,00 15 1 IM.015 Spina17 fermo 1 percussore IM.017 O-ring15 fermo 1 spina IM.015FIRING RETAINING PIN percussore Spina fermo percussoreO -RING 2,00 FIRING RETAINING PIN2,00 2,00 16 1 2M.016 Manettino otturatore cal2016 1 2M.016BOLT HANDLE Manettino otturatore cal209,00 BOLT HANDLE 9,00 17 1 IM.017 O-ring fermo spina percussore17 1 IM.017O -RING O-ring fermo spina percussore2,00 O -RING 2,00

43 Pos. 01 10 11 11 21 12 32 13 41 14 51 15 61 16 71 17 81 18 91 19 01 20 11 21 21 22 41 24 1 23 51 25 61 26 1 2 1 1 1 4 1 3 1 5 1 6 1 7 1 8 1 9 Q.tà IT.003B (930.T003) Codice IT.026B 2T-001 2T-023 2T.014 2T.018 2T.019 2T.022 2T.025 IT.002 IT.004 IT.005 IT.006 IT.007 IT.008 IT.009 IT.010 IT.011 IT.012 IT.013 IT.015 IT.016 IT.017 IT.020 IT.021 IT.024 Sottoguardia grilletto - trigger Molla grilletto Molla sicura antiraffica Guida molla sicura antiraffica Dente antiraffica Perno sicura antiraffica pulsante sicura Piolo sicura Molla sicura Spina fermo molla sicura Molla leva sgancio cartuccia Spina grilletto Molla cane Guidamolla cane Dente arresto otturatore perno dente arresto otturatore Elavatore cal.20 - fresato Molla elevatore cal. 20 Guidamolla elevatore Cane - hammer Boccola cane Leva com. f.c. / Cartridge drop lever - cal 20 gauge Molla spina sottoguardia Piastrina appoggio molla dente arr. ott. / Spring tunner plate Spina sottoguardia / Trigger guard pin PARTICOLARE

EXPLODED VIEW DIAGRAM

Trigger Assembly 20 Ga 3””

valid for: ID22026MAG ID22028MAG TRIGGER GROUP 18i 20ga - 3" (A01)

13 TRIGGER GROUP 18i 20ga 12

13 Pos. Q.tà Codice PARTICOLARE PRICE

8 1 1 2T-001 Sottoguardia TRIGGER GUARD 28,00

11 2 1 IT.002 Molla grilletto TRIGGER SPRING 2,00

1 3 1 930.T003 grilletto - trigger TRIGGER 13,00

9 4 1 IT.004 Molla sicura antiraffica SAFETY SPRING 2,00

16 5 1 IT.005 Guida molla sicura antiraffica DISCONNECTOR PLUNGER 2,00

10 6 1 IT.006 Dente antiraffica DISCONNECTOR 6,90

26 7 1 IT.007 Perno sicura antiraffica SAFETY PLUNGER 3,00 23

3 8 1 IT.008 pulsante sicura SAFETY BOTTON 3,00 9 1 IT.009 Piolo sicura SAFETY PIN 3,00 10 1 IT.010 Molla sicura SAFETY SPRING 2,00 25 11 1 2T.011 Spina fermo molla sicura SAFETY SPRING RETAINING PIN 2,00 12 1 IT.012 Molla leva sgancio cartuccia CARTRIDGE DROP LEVER SPRING 2,00 13 2 IT.013 Spina grilletto TRIGGER PIN 2,00 22 14 1 2T.014 Molla cane HAMMER SPRING 2,00 15 1 IT.015 Guidamolla cane HAMMER SPRING CAPSULE 3,50 16 1 IT.016 Dente arresto otturatore BREECH BOLT LATCH 7,00 18 17 1 IT.017 perno dente arresto otturatore BREECH BOLT LATCH PIN 2,00 18 1 2T.018 Elavatore cal.20 - fresato CARRIER 18,00

6 19 1 2T.019 Molla elevatore cal. 20 CARRIER SPRING 2,00 7

4 20 1 IT.020 Guidamolla elevatore CARRIER SPRING PLUNGER 3,00 5 2

19 21 1 IT.021 Cane - hammer HAMMER 8,00 20

21 22 1 2T.022 Leva com. f.c. Cartridge drop lever - cal 20 7,00 15

17 23 1 2T-023 Boccola cane HAMMER BUSH 4,00 14 24 24 1 IT.024 Molla spina sottoguardia TRIGGER GUARD PIN SPRING 2,00 25 1 2T.025 Spina sottoguardia / Trigger guard pin TRIGGER GUARD PIN 2,00 26 1 IT.026B Piastrina appoggio molla dente arr. ott. Spring tunneL plate 3,00

44 PARTS LIST Trigger Assembly 20 Ga 3”

TRIGGER GROUP 18i 20ga TRIGGER GROUP 18i 20ga TRIGGER GROUP 18i 20ga Pos. Q.tà Codice PARTICOLARE PRICE Pos. Q.tà Codice PARTICOLARE Pos. Q.tà Codice PRICEPARTICOLARE PRICE 1 1 2T-001 Sottoguardia TRIGGER GUARD 28,00 1 1 2T-001 Sottoguardia 1 1TRIGGER GUARD 2T-001 Sottoguardia 28,00 TRIGGER GUARD 28,00 2 1 IT.002 Molla grilletto TRIGGER SPRING 2,00 2 1 IT.002 Molla grilletto 2 1TRIGGER SPRING IT.002 Molla grilletto 2,00 TRIGGER SPRING 2,00 3 1 930.T003 grilletto - trigger TRIGGER 13,00 3 1 930.T003 grilletto - trigger 3 1TRIGGER 930.T003 grilletto - trigger 13,00 TRIGGER 13,00 4 1 IT.004 Molla sicura antiraffica SAFETY SPRING 2,00 4 1 IT.004 Molla sicura antiraffica 4 1SAFETY SPRING IT.004 Molla sicura antiraffica2,00 SAFETY SPRING 2,00 5 1 IT.005 Guida molla sicura antiraffica DISCONNECTOR PLUNGER 2,00 5 1 IT.005 Guida molla sicura antiraffica 5 1DISCONNECTOR PLUNGER IT.005 Guida molla sicura antiraffica2,00 DISCONNECTOR PLUNGER 2,00 6 1 IT.006 Dente antiraffica DISCONNECTOR 6,90 6 1 IT.006 Dente antiraffica 6 1DISCONNECTOR IT.006 Dente antiraffica 6,90 DISCONNECTOR 6,90 7 1 IT.007 Perno sicura antiraffica SAFETY PLUNGER 3,00 7 1 IT.007 Perno sicura antiraffica 7 1SAFETY PLUNGER IT.007 Perno sicura antiraffica3,00 SAFETY PLUNGER 3,00 8 1 IT.008 pulsante sicura SAFETY BOTTON 3,00 8 1 IT.008 pulsante sicura 8 1SAFETY BOTTON IT.008 pulsante sicura 3,00 SAFETY BOTTON 3,00 9 1 IT.009 Piolo sicura SAFETY PIN 3,00 9 1 IT.009 Piolo sicura 9 1SAFETY PIN IT.009 Piolo sicura 3,00 SAFETY PIN 3,00 10 1 IT.010 Molla sicura SAFETY SPRING 2,00 10 1 IT.010 Molla sicura 10 1SAFETY SPRING IT.010 Molla sicura 2,00 SAFETY SPRING 2,00 11 1 2T.011 Spina fermo molla sicura SAFETY SPRING RETAINING PIN 2,00 11 1 2T.011 Spina fermo molla sicura 11 1SAFETY SPRING RETAINING PIN 2T.011 Spina fermo molla sicura2,00 SAFETY SPRING RETAINING PIN 2,00 12 1 IT.012 Molla leva sgancio cartuccia CARTRIDGE DROP LEVER SPRING 2,00 12 1 IT.012 Molla leva sgancio cartuccia 12 1CARTRIDGE DROP LEVER SPRING IT.012 Molla leva sgancio cartuccia2,00 CARTRIDGE DROP LEVER SPRING 2,00 13 2 IT.013 Spina grilletto TRIGGER PIN 2,00 13 2 IT.013 Spina grilletto 13 2TRIGGER PIN IT.013 Spina grilletto 2,00 TRIGGER PIN 2,00 14 1 2T.014 Molla cane HAMMER SPRING 2,00 14 1 2T.014 Molla cane 14 1HAMMER SPRING 2T.014 Molla cane 2,00 HAMMER SPRING 2,00 15 1 IT.015 Guidamolla cane HAMMER SPRING CAPSULE 3,50 15 1 IT.015 Guidamolla cane 15 1HAMMER SPRING CAPSULE IT.015 Guidamolla cane 3,50 HAMMER SPRING CAPSULE 3,50 16 1 IT.016 Dente arresto otturatore BREECH BOLT LATCH 7,00 16 1 IT.016 Dente arresto otturatore 16 1BREECH BOLT LATCH IT.016 Dente arresto otturatore7,00 BREECH BOLT LATCH 7,00 17 1 IT.017 perno dente arresto otturatore BREECH BOLT LATCH PIN 2,00 17 1 IT.017 perno dente arresto otturatore 17 1BREECH BOLT LATCH PIN IT.017 perno dente arresto2,00 otturatore BREECH BOLT LATCH PIN 2,00 18 1 2T.018 Elavatore cal.20 - fresato CARRIER 18,00 18 1 2T.018 Elavatore cal.20 - fresato 18 1CARRIER 2T.018 Elavatore cal.20 - fresato18,00 CARRIER 18,00 19 1 2T.019 Molla elevatore cal. 20 CARRIER SPRING 2,00 19 1 2T.019 Molla elevatore cal. 20 19 1CARRIER SPRING 2T.019 Molla elevatore cal.2,00 20 CARRIER SPRING 2,00 20 1 IT.020 Guidamolla elevatore CARRIER SPRING PLUNGER 3,00 20 1 IT.020 Guidamolla elevatore 20 1CARRIER SPRING PLUNGER IT.020 Guidamolla elevatore3,00 CARRIER SPRING PLUNGER 3,00 21 1 IT.021 Cane - hammer HAMMER 8,00 21 1 IT.021 Cane - hammer 21 1HAMMER IT.021 Cane - hammer 8,00 HAMMER 8,00 22 1 2T.022 Leva com. f.c. Cartridge drop lever - cal 20 7,00 22 1 2T.022 Leva com. f.c. 22 1Cartridge drop lever - cal 20 2T.022 Leva com. f.c. 7,00 Cartridge drop lever - cal 20 7,00 23 1 2T-023 Boccola cane HAMMER BUSH 4,00 23 1 2T-023 Boccola cane 23 1HAMMER BUSH 2T-023 Boccola cane 4,00 HAMMER BUSH 4,00 24 1 IT.024 Molla spina sottoguardia TRIGGER GUARD PIN SPRING 2,00 24 1 IT.024 Molla spina sottoguardia 24 1TRIGGER GUARD PIN SPRING IT.024 Molla spina sottoguardia2,00 TRIGGER GUARD PIN SPRING 2,00 25 1 2T.025 Spina sottoguardia / Trigger guard pin TRIGGER GUARD PIN 2,00 25 1 2T.025 Spina sottoguardia / Trigger guard25 pin 1TRIGGER GUARD PIN 2T.025 Spina sottoguardia /2,00 Trigger guard pin TRIGGER GUARD PIN 2,00 26 1 IT.026B Piastrina appoggio molla dente arr. ott. Spring tunneL plate 3,00 26 1 IT.026B Piastrina appoggio molla dente 26arr. ott. 1 Spring tunneL plate IT.026B Piastrina appoggio 3,00molla dente arr. ott. Spring tunneL plate 3,00

45 WEATHERBY SERVICE POLICY

Weatherby is a name that has been synonymous with quality firearms for over 70 years. All Weatherby® firearms are manufactured of the finest materials and have been thoroughly inspected and tested in every phase of production. Because of the confidence we have in our products, Weatherby® does not provide a written warranty, but rather stands behind its reputation for customer service and satisfaction.

Simply stated, we will consider requests for service or repair of Weatherby® firearms without charge on a case by case basis. A determination will be made taking into consideration such things as the age and condition of the firearm, and the circumstances surrounding its malfunction or other problem.

Weatherby, Inc. will not be responsible for defects resulting from ordinary wear and tear, alterations by unauthorized persons, accidents, misuse, use of incorrect or other than factory loaded ammunition, or failure to provide reasonable and normal maintenance.

Should any Weatherby® firearm require service or repair under this service policy, it must be delivered transportation prepaid to Weatherby® Service Department only after approved by the Weatherby® service team and with an approved RMA. The product must be accompanied by a proof of purchase and a letter explaining the problem. It should also be insured by the owner at the time of shipment, as Weatherby, Inc. can accept no responsibility for damage or loss in transit. Weatherby® will pay all charges to return the product to the owner if it is accepted for service or repair without charge under the provisions of this service policy. Weatherby, Inc. also reserves the right to repair or replace any product at our sole discretion.

WEATHERBY, INC. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL OR CONTINGENT DAMAGES.

TEN COMMANDMENTS OF FIREARMS SAFETY

Prevention is the solution to hunting and shooting casualties. Every hunting and shooting accident that has occurred could have been prevented. Most such accidents happen as a result of people ignoring basic firearms safety rules. Prevention involves knowing and obeying those basic safety rules. Responsible, knowledgeable, and safe hunters and shooters will learn, remember and follow these simple rules:

46 1. Treat every firearm with the same respect due a loaded firearm. 2. Control the direction of your firearm’s muzzle. Carry your firearm safely, keeping the safety on until ready to shoot. Keep your finger off the trigger until ready to shoot. 3. Identify your target and what is beyond it. Know the identifying features of the game you hunt or the targets you intend to shoot. 4. Be sure the barrel and action are clear of obstructions and that you have only ammunition of proper size for the firearm you are carrying. 5. Whenever not in use, keep your firearm unloaded and store all ammunition in a separate location. 6. Never point a firearm at anything you do not want to shoot. Avoid all horseplay with a firearm. 7. Never climb a fence or tree, or jump a ditch or log, with a loaded firearm. Never pull a firearm toward you by the muzzle. 8. Never shoot at a flat hard surface or water. During target practice, be sure your backstop or shot-fall area is adequate. 9. Store firearms and ammunition separately beyond the reach of children and careless adults. 10. Avoid alcoholic beverages or other mood-altering drugs before or while shooting.

EXERCISE EXTREME CAUTION WHILE HANDLING ANY FIREARM

Heed and follow these additional gun handling warnings whenever using any firearm

• Be sure the barrel is clear of any obstruction before loading. Make it a habit to check the barrel every time before reloading.

• Never place a loaded gun into a vehicle or lean the gun against any object. The gun should be emptied and placed into a case when not in use.

• Keep the safety on at all times. Move the safety to the “FIRE” position only when you are sure that a shot is imminent.

• While loading or unloading, make sure the gun is pointed in a safe direction. Keep your finger off the trigger while operating the action.

• If your firearm fails to fire when the trigger is pulled, HANDLE WITH CARE!

• If you do not thoroughly understand the proper use and care of your gun, seek the advice of someone you know is competent.

• Do not abuse your hunting privileges. Be respectful of others and other people’s property. 47 WARNING

Firearms must be handled responsibly and securely stored to prevent access by chil- dren and other unauthorized users. California has strict laws pertaining to firearms, and you may be fined or imprisoned if you fail to comply with them. Visit the web site of the California Attorney General at https://oag.ca.gov/firearms for information on firearm laws applicable to you and how you can comply. Prevent child access by always keeping guns locked away and unloaded when not in use. If you keep a loaded firearm where a child obtains and improperly uses it, you may be fined or sent to prison.

ADVERTENCIA

Armas de juego deben de ser usadas resposablemente y almacenadas en un lugar seguro para proibir el acceso a menores de edad y personas no authorizadas. California tiene leyes estrictas sobre la posesión de armas de juego y usted puede ser multado o encarcelado si no las cumple. Visite la pagina de internet de California Attorney General en https://oag.ca.gov/firearms para obtener información de las leyes de armas de juego que aplique a su caso y como puede cumplirlas. Mantenga armas de juego lejos de menores de edad, manteniendo las armas des- cargadas y encerradas en un lugar seguro cuando no esten en uso. Si mantiene una arma de juego cardaga donde un niño tenga acceso y la utiliza incorrectamente, usted puede ser multado o encarselado.

PRINTED March, 2019 Weatherby, Inc. 1550 Yellowtail Dr Sheridan, WY 82801 www.weatherby.com

48