Dassault Systèmes Products Lines Releases Support Life Cycle Dates for Licensed Program

Total Page:16

File Type:pdf, Size:1020Kb

Dassault Systèmes Products Lines Releases Support Life Cycle Dates for Licensed Program Dassault Systèmes Products Lines Releases Support Life Cycle Dates For licensed program | ref.: 3DS_Document_2014ref.: | © Dassault Systèmes | Confidential Information | 5/23/14 © Dassault| Confidential Systèmes 3DS.COM Applicable as of - 6/8/2018 Dassault Systèmes - Customer Support Table of contents 1. 3DEXPERIENCE ........................................................................................................... 4 2. 3DEXCITE ..................................................................................................................... 5 3. BIOVIA ........................................................................................................................... 6 4. CATIA Composer ........................................................................................................... 7 5. CATIA V4 ....................................................................................................................... 8 6. CATIA AITAC ................................................................................................................. 9 7. DELMIA APRISO ......................................................................................................... 10 8. DELMIA ORTEMS ....................................................................................................... 11 9. DYMOLA...................................................................................................................... 12 10. ELECTRE & ELECTRE Connectors for V5 .................................................................. 13 11. ENGINUITY for V6 ....................................................................................................... 14 12. ENOVIA QUMAS ......................................................................................................... 15 13. ENOVIA Pinpoint ......................................................................................................... 16 14. ENOVIA EDAT ............................................................................................................. 17 15. ENOVIAvpm ................................................................................................................ 18 ref.: | 3DS_Document_2014 16. ENOVIAvpm 1.6........................................................................................................... 19 17. EXALEAD V6 ............................................................................................................... 20 18. GEOVIA ....................................................................................................................... 21 19. HELIX .......................................................................................................................... 22 20. ICEM Surf .................................................................................................................... 23 21. IMPARARIA ................................................................................................................. 24 22. NETVIBES NV1 ........................................................................................................... 25 © Dassault Systèmes | Confidential Information | 5/23/14 © Dassault| Confidential Systèmes 23. Q-CHECKER ............................................................................................................... 26 24. QUINTIQ ...................................................................................................................... 27 3DS.COM 25. REQTIFY – CONTROLBUILD – AUTOSAR BUILDER ................................................ 28 26. SFE .............................................................................................................................. 29 27. SIMULAYT ................................................................................................................... 30 28. SIMULIA Abaqus ......................................................................................................... 31 29. SIMULIA CST .............................................................................................................. 32 30. SIMULIA Isight ............................................................................................................. 33 31. SIMULIA Simpack ........................................................................................................ 34 32. SIMULIA Simpoe Mold ................................................................................................. 35 33. SIMULIA Tosca ............................................................................................................ 36 34. SIMULIA Wave6 .......................................................................................................... 37 35. SIMULIA XFlow............................................................................................................ 38 2 36. SOLIDWORKS............................................................................................................. 39 37. V5 ................................................................................................................................ 40 38. V6 ................................................................................................................................ 41 | ref.: | 3DS_Document_2014 © Dassault Systèmes | Confidential Information | 5/23/14 © Dassault| Confidential Systèmes 3DS.COM 3 1. 3DEXPERIENCE GA FULL EXTENDED Release date support end support end 3D EXPERIENCE R2014x 24-Feb-14 24-Feb-17 24-Feb-18 3D EXPERIENCE R2015x 20-Feb-15 20-Feb-18 20-Feb-19 3D EXPERIENCE R2016x 4-Feb-16 4-Feb-19 4-Feb-20 3D EXPERIENCE R2017x 22-Nov-16 22-Nov-19 22-Nov-20 3D EXPERIENCE R2018x 12-Jan-18 12-Jan-21 12-Jan-22 These dates also concern 3DEXPERIENCE Online Companion portfolio. | ref.: | 3DS_Document_2014 © Dassault Systèmes | Confidential Information | 5/23/14 © Dassault| Confidential Systèmes 3DS.COM 4 2. 3DEXCITE GA FULL support EXTENDED Release* date end support end 3DEXCITE DG 13.0 17-Jul-15 17-Jul-17 3DEXCITE PB 8.0 17-Jul-15 17-Jul-17 3DEXCITE DG 13.1 3-Dec-15 3-Dec-17 3DEXCITE DG 2017 13-May-16 13-May-18 3DEXCITE PB 2017 13-May-16 13-May-18 3DEXCITE DG 2017x 25-Nov-16 25-Nov-18 3DEXCITE PB 2017x 25-Nov-16 25-Nov-18 3DEXCITE DG 2018 07-Jul-17 07-Jul-19 3DEXCITE PB 2018 07-Jul-17 07-Jul-19 3DEXCITE DG 2018x 16-Mar-18 16-Mar-21 16-Mar-22 3DEXCITE PB 2018x 16-Mar-18 16-Mar-21 16-Mar-22 3DEXCITE DGMKT 2018x 16-Mar-18 16-Mar-21 16-Mar-22 *For the Licensed Programs RAMSIS integrated in DELTAGEN (DG), within the limitation of full support mentioned above, DS reserves the right to withdraw Support Services at the end of each civil year. | ref.: | 3DS_Document_2014 © Dassault Systèmes | Confidential Information | 5/23/14 © Dassault| Confidential Systèmes 3DS.COM 5 3. BIOVIA FULL support LEGACY FULL support LEGACY GA Release end support end end support end date (Unregulated) (Unregulated) (Regulated) (Regulated) BIOVIA 2016 15-Dec-15 31-Dec-18 31-Dec-19 31-Dec-20 31-Dec-21 BIOVIA 2017 31-May-16 31-May-19 31-May-20 31-May-21 31-May-22 BIOVIA 2017R2 14-Mar-17 14-Mar-20 14-Mar-21 14-Mar-22 14-Mar-23 BIOVIA Cloud 2017 06-Apr-18 06-Apr-21 06-Apr-22 06-Apr-23 06-Apr-24 BIOVIA 2018 16-Mar-18 16-Mar-21 16-Mar-22 16-Mar-23 16-Mar-24 BIOVIA Content 2018 16-Mar-18 16-Mar-21 16-Mar-22 16-Mar-23 16-Mar-24 BIOVIA Biological 13 -Aug -15 31-Aug-18 31-Aug-19 Registration 4.2 BIOVIA Chemical 13 -Aug -15 31-Aug-18 31-Aug-19 Registration 4.2 BIOVIA Direct 9.0 19-Aug-13 08-Aug-16 08-Aug-17 08-Aug-18 08-Aug-19 BIOVIA Direct 9.1 30-Sep-14 30-Jun-17 30-Jun-18 30-Jun-19 30-Jun-20 BIOVIA Direct 9.5 13-Mar-15 28-Feb-18 28-Feb-19 28-Feb-20 28-Feb-21 BIOVIA Discovery 23 -Mar -18 23-Mar-18 23-Mar-19 Studio 4.5 BIOVIA Draw EE 4.2 17-Feb-15 16-May-17 16-May-18 16-May-19 16-May-20 BIOVIA Draw 20 -May -14 20-May-17 20-May-18 20-May-19 20-May-20 ref.: | 3DS_Document_2014 Standalone 4.2 BIOVIA Foundation 29 -Jun -15 16-Mar-18 16-Mar-19 4.5 BIOVIA Insight 2.6 09-Sep-15 09-Sep-18 09-Sep-19 BIOVIA Insight for 29 -Jun -15 30-Jun-18 30-Jun-19 30-Jun-20 30-Jun-21 Excel 2.6 BIOVIA Pipeline Pilot 16 -Mar -15 16-Mar-18 16-Mar-19 9.5 Symyx Registration (Isentris Based) 1.5 BIOVIA CISPro 4.8 27-Mar-15 30-Jan-18 30-Jan-19 30-Jan-20 30-Jan-21 BIOVIA CISPro 5.0 16-Oct-15 30-Jun-18 30-Jun-19 30-Jun-20 30-Jun-21 Information | 5/23/14 © Dassault| Confidential Systèmes BIOVIAExperiment 21 -Aug -14 15-Aug-17 15-Aug-18 15-Aug-19 15-Aug-20 4.2 BIOVIA Experiment 3DS.COM 31 -Jul-15 18-Dec-17 18-Dec-18 18-Dec-19 18-Dec-20 4.3 BIOVIA LES EBR 3.4 17-Sep-13 17-Sep-18 17-Sep-19 BIOVIA LES EBR 3.5 26-Jun-14 26-Jun-19 26-Jun-20 BIOVIA LES EBR 3.6 16-Sep-14 16-Sep-19 16-Sep-20 BIOVIA Notebook 6.0 28-Sep-15 28-Sep-18 28-Sep-19 BIOVIA Request 3.0 10-Jan-14 01-Jul-17 01-Jul-18 01-Jul-18 01-Jul-19 BIOVIA Request 3.1 07-Jan-15 01-Jul-18 01-Jul-19 01-Jul-20 01-Jul-21 BIOVIA Workbook 30 -Oct -13 01-Nov-16 01-Nov-17 01-Nov-18 01-Nov-19 6.8 BIOVIA Workbook 31 -Jul-15 01-Sep-17 01-Sep-18 01-Sep-19 01-Sep-20 6.9 BIOVIA Discoverant 30 -Dec -14 30-Dec-17 30-Dec-18 30-Dec-19 30-Dec-20 5.0 6 4. CATIA Composer GA FULL support EXTENDED Release date end support end Composer R2014x 14-Apr-14 14-Apr-17 14-Apr-18 Studio Pro R2014x 14-Apr-14 14-Apr-17 14-Apr-18 Composer R2015 13-Jun-14 13-Jun-17 13-Jun-18 Composer R2015x 28-Nov-14 28-Nov-17 28-Nov-18 Composer R2016 29-May-15 29-May-18 29-May-19 Composer R2016x 25-Nov-15 25-Nov-18 25-Nov-19 Composer R2017 10-Jun-16 10-Jun-19 10-Jun-20 Composer R2017x 23-Nov-16 23-Nov-19 23-Nov-20 Composer R2018
Recommended publications
  • What's New in Solidworks 2019—3D
    WHAT’S NEW IN SOLIDWORKS 2019—3D CAD MESH MODELING OPENS UP NEW DESIGN Benefits 1 POSSIBILITIES Increased capabilities for mesh geometry • Easily create complex textures by converting 2D appearances streamlining reverse into real 3D geometry engineering and • Use mesh files like they are solids using the new Segment topology optimization. Mesh • Automatically create 2D sketches at intersections of geometry and a plane with the Slicing command NEW WAYS TO INTERACT WITH SOLIDWORKS Benefits 2 • Support for Microsoft® Surface dial from the Surface Studio Be more productive with the latest • Sketch gesture recognition enhancements including splines interfaces devices and and slots SOLIDWORKS. • Improved Touch mode gestures including copy, select and drag, and 3D rotate lock • Customize task pane tabs EXTEND YOUR SOLIDWORKS EXPERIENCE IN AR/VR Benefits 3 • Simplify the path from SOLIDWORKS® to Augmented (AR) Faster performance and new ways to and Virtual Reality (VR) with a new export option called interact with your Extended Reality (XR) CAD data in AR/VR. • Full support of latest graphics card types results in a dramatic frame rate increase CREATE AND WORK WITH LARGE ASSEMBLIES Benefits 4 FASTER Massive performance gains and workflow • Create new assemblies in Large Design Review mode optimization with • Enhanced Defeature tool gives more control and usability for large assemblies. IP protection • Save assembly as multi-body part has more options and more control • Automatically lock rotation for Toolbox fasteners CLEARER AND FASTER COLLABORATION Benefits 5 • New export options for AEC and 3D Interconnect now More options for import and export to supports IFC import make collaboration • 3D Mark up on parts and assemblies (also Pen/Touch enabled) easier.
    [Show full text]
  • Optimation Optimizing Process Control with Dymola
    DS PLM SUCCESS STORY Optimation Optimizing process control with Dymola Overview Challenge Optimizing manufacturing processes define the strategies to run the mill or the Optimation needed to provide its Sweden’s Optimation helps companies to power plant at an optimum level and use customers with solutions that define optimize their manufacturing processes via simulation to test those strategies before they the optimal process control strategy for their production processes its expertise in control technology, dynamic are implemented in the real world.” simulation, and production processes. Solution Optimized process control can contribute to With Dymola, Optimation produces simulation Optimation uses Dymola to energy savings, better product quality, and results that mimic reality enabling its dynamically simulate the way a increased output. On the contrary, incorrectly customers to implement the most optimum controller should function for maximum structured and insufficiently configured configuration from the beginning. “I suppose operating capacity control systems lead to production downtime, we can say that we are control architects - we idleness or inefficiencies. Customers that turn define the optimum strategy and we create a Benefits to Optimation for process control optimization roadmap so that programmers have precise Thanks to Dymola, Optimation’s customers have a precise idea of the come from a variety of disciplines that include instructions on how to program a control way a process controller should be pulp mills, power plants, mining and steel. system,” said Eriksson. programmed before proceeding with physical modifications or installations Optimum configuration with Dymola A plant is an ensemble of hydraulic, Optimation uses Dymola, Dassault Systèmes mechanical, electrical systems. This is why multi-engineering modeling and simulation Optimation adopts a broad approach when solutions based on the open Modelica asked to optimize an existing plant.
    [Show full text]
  • ISIGHT Brochure
    ISIGHT AUTOMATE DESIGN EXPLORATION AND OPTIMIZATION ISIGHT INDUSTRY CHALLENGES In today’s computer-aided product development and manufacturing environment, designers and engineers are using a wide range of KEY BENEFITS software tools to design and simulate their products. Often, the • Reduce time and costs parameters and results from one software package are required as • Improve product reliability inputs to another package, and the manual process of entering the required data can reduce efficiency, slow product development, and • Gain competitive advantage introduce errors in modeling and simulation assumptions. SIMULIA’s Isight Solution Isight provides designers, engineers, and researchers with an open system for integrating design and simulation models—created with various CAD, CAE, and other software applications—to automate the execution of hundreds or thousands of simulations. Isight allows users to save time and improve their products by optimizing them against performance or cost metrics through statistical methods, such as Design of Experiments (DOE) or Design for Six Sigma. Isight combines cross-disciplinary models and applications together in a simulation process flow, automates their execution, explores the resulting design space, and identifies the optimal design Isight parameters based on required constraints. Isight’s ability to manipulate and map parametric data between process steps and automate multiple simulations greatly improves efficiency, reduces manual errors, and accelerates the evaluation of product design alternatives. Open Component Framework Isight provides a standard library of components— including Excel™, Word™, CATIA V5™, Dymola™, MATLAB®, COM, Text I/O applications, Java and Python Scripting, and databases—for integrating and running a model or simulation. These components form the building blocks of simulation process flows.
    [Show full text]
  • Software Product
    DEVELOPERS GUIDE BIOVIA DRAW 2016 Copyright Notice ©2016 Dassault Systèmes. All rights reserved. 3DEXPERIENCE, the Compass icon and the 3DS logo, CATIA, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD, 3D VIA, BIOVIA and NETVIBES are commercial trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the U.S. and/or other countries. All other trademarks are owned by their respective owners. Use of any Dassault Systèmes or its subsidiaries trademarks is subject to their express written approval. Acknowledgments and References To print photographs or files of computational results (figures and/or data) obtained using BIOVIA software, acknowledge the source in an appropriate format. For example: "Computational results obtained using software programs from Dassault Systèmes BIOVIA. The ab initio calculations were performed with the DMol3 program, and graphical displays generated with Draw." BIOVIA may grant permission to republish or reprint its copyrighted materials. Requests should be submitted to BIOVIA Support, either through electronic mail to [email protected], or in writing to: BIOVIA Support 5005 Wateridge Vista Drive, San Diego, CA 92121 USA ExtendableRenditorDemo 28 Contents StructureResolver API 29 Deployment of the Example 30 Draw Overview 1 DemoRendererCustomAssemblyResolver 34 Customizing Draw 1 DemoLateBoundRenditor 35 Important Files and Documents 1 Add-ins: Actions and Tools 37 The Draw Editor 2 About Add-in Actions 37 Using Draw in a .NET Application 2 Add-in Action Example: Using Draw in
    [Show full text]
  • Biovia Materials Studio Motif Datasheet
    BIOVIA MATERIALS STUDIO MOTIF DATASHEET BIOVIA Materials Studio Motif expands BIOVIA’s toolset for BIOVIA Materials Studio Motif supports two primary workflows: crystal engineering efforts. It is a tool designed to analyze To extract connectivity information of molecular crystals and to connectivity information in molecular crystals, providing a compare this connectivity information to experimentally know qualitative and quantitative analysis method of hydrogen structures. bond topologies. Combined with the predictive capabilities of The first workflow uses previously defined contact points – Polymorph, BIOVIA Materials Studio Motif helps categorizing typically hydrogen bond acceptors/ donors or ionic contacts proposed packing arrangements and introduces a similarity – to search for bonding motifs: Rings, infinite and finite chains, measure to related structures available in the Cambridge discrete motifs, and intermolecular contacts. Structural Database (CSD), allowing for a statistical scoring of proposed structures The second workflow queries the Cambridge Structural Database (CSD) for similar or related structures and their Polymorphism affects a wide array of materials properties, bonding motifs. BIOVIA Materials Studio Motif uses a similarity including solubility, bioavailability, mechanical stability, and measure – based on Tanimoto coefficients – to gauge whether manufacturability. For researchers dealing with solidification the bonding motifs of comparable CSD structures match those processes, selecting an optimal form introduces both challenges of the analyzed structure. As a result a similarity score is and opportunities. BIOVIA Materials Studio Motif supports these assigned to the analyzed structure. This allows for a statistical scientific efforts by generating knowledge about hydrogen comparison of a proposed new polymorph and previously bond topologies. This knowledge can help categorizing the known structures with similar molecular architecture.
    [Show full text]
  • Guidelines for Papers to Be Presented at the ABAQUS Users' Conference
    Multiscale Modeling of Polymer Composites: From Atomistic Simulation to Structural Analysis Takaya Kobayashi, Kensuke Ogawa Mechanical Design & Analysis Corporation Satoru Yamamoto, Riichi Kuwahara Dassault Systemes BIOVIA K.K. Ryosuke Matsuzaki Tokyo University of Science Abstract: A multiscale modeling procedure was presented to design thermosetting resins and products of polymer composites. Heat curing and cross-linking reaction steps were considered with activation energy and heat generation via molecular dynamics simulation of BIOVIA Materials Studio. The mechanical properties and adhesive strength for fillers were also estimated, and were assigned to SIMULIA Abaqus. Using the Abaqus fracture analysis capability, the crack propagation behavior, including matrix-failure and interface-failure, was investigated. Keywords: Polymer Composites, Multiscale Modeling, Atomistic Simulation and Structural Analysis. 1. Introduction Polymer composites formed by thermosetting resins and carbon fibers are promising materials in transportation systems, such as airplanes and automobiles, owing to their light weight and high stiffness. In thermosetting resins, combinations of epoxy and amine compounds are widely used as the base resin and curing agent, respectively. The curing process of the thermosetting resin was investigated, as shown in Figure 1. The mechanical behavior of the curing process can be characterized by thermo-rheological behaviors (typically, the expression of elasticity owing to gelling and the volumetric change owing to curing shrinkage). From an experimental point of view, the expression of elasticity is evaluated by viscoelastic measurements using a shear rheometer with parallel plates, whereas the curing shrinkage is measured typically by volumetric dilatometry. These measurements must be followed by an estimation of the curing (hardening) degree, which indicates the degree of progression of the curing reaction of the polymeric materials.
    [Show full text]
  • Dassault Systèmes Products Lines Releases Support Life Cycle Dates for Licensed Program
    Dassault Systèmes Products Lines Releases Support Life Cycle Dates For licensed program © Dassault Systèmes | Confidential Information | 5/23/14 | ref.: 3DS_Document_2014 ref.: Information | | 5/23/14 © Dassault | Confidential Systèmes 3DS.COM Applicable as of - 9/13/2019 Dassault Systèmes - Customer Support Table of contents 1. 3DEXPERIENCE ........................................................................................................... 4 2. 3DEXCITE ..................................................................................................................... 5 3. BIOVIA ........................................................................................................................... 6 4. CATIA Composer ........................................................................................................... 8 5. CATIA V4 ....................................................................................................................... 9 6. CATIA AITAC ............................................................................................................... 10 7. DELMIA APRISO ......................................................................................................... 11 8. DELMIA ORTEMS ....................................................................................................... 12 9. DYMOLA...................................................................................................................... 13 10. ELECTRE & ELECTRE Connectors for V5 .................................................................
    [Show full text]
  • About Geovia
    ABOUT GEOVIA OVERVIEW Globally, Dassault Systèmes’ GEOVIA employs over 150 GEOVIA is part of Dassault Systèmes, the 3DEXPERIENCE® mining professionals in all major mining centers. With expert Company. While GEOVIA’s focus is currently on the mining knowledge of their regions, and local language and cultural industry, its objective is to model and simulate our planet, understanding, our services professionals are highly skilled at improving predictability, efficiency, safety, and sustainability maximizing the benefits of its software solutions. throughout the natural resources sector. WHAT CLIENTS SAY ABOUT GEOVIA DASSAULT SYSTÈMES AND MINING “InSite provided a quick return on investment – we were up When mining companies seek to increase mine productivity, and running in production in just two months. Thanks to they turn to Dassault Systèmes for technology and services. It InSite, our stockpile balances can be accurately calculated and is home to world renowned and award winning mining we have the ability to report on numbers we can rely on.” solutions and to industry thought leaders who are pushing the — André van Wageningen boundaries of what’s possible in mining. The largest global Engineering Superintendent, Agnico-Eagle Kittilä Mine supplier of mining software, Dassault Systèmes’ GEOVIA delivers comprehensive solutions in all major mining centers in “The broader application of GEOVIA MineSched has improved more than 135 countries at over 4,000 sites. Every major our ability to reach to changes in external conditions such as mining company is a Dassault Systèmes client. the downturn in commodity prices and changing site conditions such as harder ore types and higher arsenic WHY MINING COMPANIES grades.
    [Show full text]
  • Artificial Intelligence in Industrial Markets
    ARTIFICIAL INTELLIGENCE IN INDUSTRIAL MARKETS , the Compass icon and the 3DS logo, CATIA, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD, 3D VIA, 3DSWYM, BIOVIA, NETVIBES, and 3DEXCITE are commercial trademarks trademarks commercial are 3D VIA, 3DSWYM, BIOVIA, NETVIBES, and 3DEXCITE EXALEAD, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, CATIA, and the 3DS logo, icon , the Compass EXPERIENCE® 3D Our 3DEXPERIENCE® platform powers our brand applications, serving 12 industries, and provides a rich portfolio of industry solution experiences. Dassault Systèmes, the 3DEXPERIENCE® Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 230,000 customers of all sizes in all industries in more than 140 countries. For more information, visit www.3ds.com. ©2014 Dassault Systèmes. All rights reserved. Systèmes. ©2014 Dassault approval. written their express is subject to or its subsidiaries Systèmes trademarks owners. Use of any Dassault owned by their respective are All other trademarks other countries. or its subsidiaries Systèmes in the U.S. of Dassault and/or trademarks or registered Americas Europe/Middle East/Africa Asia-Pacific Dassault Systèmes Dassault Systèmes Dassault Systèmes K.K. 175 Wyman Street 10, rue Marcel Dassault ThinkPark Tower Waltham, Massachusetts CS 40501 2-1-1 Osaki, Shinagawa-ku, 02451-1223 78946 Vélizy-Villacoublay Cedex Tokyo 141-6020 USA France Japan WHY ARTIFICIAL INTELLIGENCE MATTERS TO INDUSTRIAL MARKETS Industries like manufacturing, mining and construction are sometimes characterized as digital Luddites, with an odd attachment to business relics like fax machines, paper catalogs, clipboards and Post-it Notes.
    [Show full text]
  • Intelligent Customer Analytics a Data-Driven Solution for Boosting Customer Engagement and Loyalty
    BUSINESS SERVICES INTELLIGENT CUSTOMER ANALYTICS A DATA-DRIVEN SOLUTION FOR BOOSTING CUSTOMER ENGAGEMENT AND LOYALTY GAIN HOLISTIC, ACTIONABLE CUSTOMER INSIGHTS, MAKE SMARTER DECISIONS AND IMPROVE YOUR CUSTOMER’S EXPERIENCE If you embrace digital transformation, can you improve customer engagement, distill actionable customer insights to increase efficiencies, and strengthen customer trust? INTELLIGENT CUSTOMER ANALYTICS “With a customer engagement system…like EXALEAD OneCall*, we have a better client employee experience overall.” 360º TIMELINE INSTANT — Frédéric360 LOUISº NEXT VIEW Chief InformationCOLLABORAT OfficerION Eovi McdPL UmutuelleS BEST ACTION Data Multi-channel Internal Extended Recommended Discovery Customer Behavior Sharing Content Actions Increasingly digitally savvy customers with an appetite for personalized and sophisticated products are demanding greater simplicity and stronger client engagement. Regulators are demanding greater transparency and more discipline and all industries are facing a more competitive and challenging environment. Only those institutions that can distill actionable customer insights from disparate sources of enterprise and social data can transform the challenges of the current environment into opportunities, regain customer trust, increase operational efficiencies, and gain a competitive advantage. If you embrace digital transformation, can you you compete more effectively, differentiate, and win back customer trust whilst competitors are side-lined as they undergo passive transformation? BUSINESS
    [Show full text]
  • BIOVIA Pipeline Pilot System Requirements
    SYSTEM REQUIREMENTS PIPELINE PILOT 2020 Copyright Notice ©2019 Dassault Systèmes. All rights reserved. 3DEXPERIENCE, the Compass icon and the 3DS logo, CATIA, SOLIDWORKS, ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD, 3DVIA, 3DSWYM, BIOVIA, NETVIBES, IFWE and 3DEXCITE, are commercial trademarks or registered trademarks of Dassault Systèmes, a French "société européenne" (Versailles Commercial Register # B 322 306 440), or its subsidiaries in the U.S. and/or other countries. All other trademarks are owned by their respective owners. Use of any Dassault Systèmes or its subsidiaries trademarks is subject to their express written approval. Acknowledgments and References To print photographs or files of computational results (figures and/or data) obtained by using Dassault Systèmes software, acknowledge the source in an appropriate format. For example: "Computational results were obtained by using Dassault Systèmes BIOVIA software programs. Pipeline Pilot Server was used to perform the calculations and to generate the graphical results." Dassault Systèmes may grant permission to republish or reprint its copyrighted materials. Requests should be submitted to Dassault Systèmes Customer Support, either by visiting https://www.3ds.com/support/ and clicking Call us or Submit a request, or by writing to: Dassault Systèmes Customer Support 10, Rue Marcel Dassault 78140 Vélizy-Villacoublay FRANCE Contents About This Document 1 Definitions 1 Additional Information 1 Dassault Systèmes Support Resources 1 Pipeline Pilot Server Requirements 2 Minimum Hardware
    [Show full text]
  • DIGITAL TRANSFORMATION in PRODUCTION PLANNING and SCHEDULING White Paper
    DIGITAL TRANSFORMATION IN PRODUCTION PLANNING AND SCHEDULING White Paper INTRODUCTION Planning systems for manufacturers have been around for half a century, and have evolved and grown with advancements in technology and management theory throughout that span of time. Many thousands of companies and plants across the globe are using a wide variety of manufacturing planning systems to plan production and purchasing, minimize inventory, maximize availability for customer service, make the most effective use of available resources, and control costs. The real value of planning systems for manufacturers is that they serve as a communication and coordination vehicle for breaking down interdepartmental barriers (often called information silos). The plan includes all major activities required for producing a product, and is developed top-down from the best available prediction of demand (forecast). The plans and activities relate directly back to demand, the satisfaction of which is the definition of customer service. This centralized, coordinated plan, therefore, keeps everybody pulling in the same direction, working toward the same goal. While many plants have and use planning systems on a daily basis, the sad truth is that most do not really take full advantage of what they have to offer. An alarming number of companies are using their systems primarily for accounting and for tracking customer orders, work orders and purchase orders. Many of these companies “run” the planning application, but do not really follow the recommendations. Sadly, the most commonly used “planning” system is the spreadsheet. This is especially true for overall planning including Demand Planning, Sales & Operations Planning, and Distribution/Supply Chain Planning.
    [Show full text]